hw/char/serial.c

   1 /*
   2  * QEMU 16550A UART emulation
   3  *
   4  * Copyright (c) 2003-2004 Fabrice Bellard
   5  * Copyright (c) 2008 Citrix Systems, Inc.
   6  *
   7  * Permission is hereby granted, free of charge, to any person obtaining a copy
   8  * of this software and associated documentation files (the "Software"), to deal
   9  * in the Software without restriction, including without limitation the rights
  10  * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
  11  * copies of the Software, and to permit persons to whom the Software is
  12  * furnished to do so, subject to the following conditions:
  13  *
  14  * The above copyright notice and this permission notice shall be included in
  15  * all copies or substantial portions of the Software.
  16  *
  17  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  18  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  19  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
  20  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  21  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
  22  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
  23  * THE SOFTWARE.
  24  */
  25
  26 #include "qemu/osdep.h"
  27 #include "hw/char/serial.h"
  28 #include "chardev/char-serial.h"
  29 #include "qapi/error.h"
  30 #include "qemu/timer.h"
  31 #include "exec/address-spaces.h"
  32 #include "qemu/error-report.h"
  33
  34 //#define DEBUG_SERIAL
  35
  36 #define UART_LCR_DLAB   0x80    /* Divisor latch access bit */
  37
  38 #define UART_IER_MSI    0x08    /* Enable Modem status interrupt */
  39 #define UART_IER_RLSI   0x04    /* Enable receiver line status interrupt */
  40 #define UART_IER_THRI   0x02    /* Enable Transmitter holding register int. */
  41 #define UART_IER_RDI    0x01    /* Enable receiver data interrupt */
  42
  43 #define UART_IIR_NO_INT 0x01    /* No interrupts pending */
  44 #define UART_IIR_ID     0x06    /* Mask for the interrupt ID */
  45
  46 #define UART_IIR_MSI    0x00    /* Modem status interrupt */
  47 #define UART_IIR_THRI   0x02    /* Transmitter holding register empty */
  48 #define UART_IIR_RDI    0x04    /* Receiver data interrupt */
  49 #define UART_IIR_RLSI   0x06    /* Receiver line status interrupt */
  50 #define UART_IIR_CTI    0x0C    /* Character Timeout Indication */
  51
  52 #define UART_IIR_FENF   0x80    /* Fifo enabled, but not functionning */
  53 #define UART_IIR_FE     0xC0    /* Fifo enabled */
  54
  55 /*
  56  * These are the definitions for the Modem Control Register
  57  */
  58 #define UART_MCR_LOOP   0x10    /* Enable loopback test mode */
  59 #define UART_MCR_OUT2   0x08    /* Out2 complement */
  60 #define UART_MCR_OUT1   0x04    /* Out1 complement */
  61 #define UART_MCR_RTS    0x02    /* RTS complement */
  62 #define UART_MCR_DTR    0x01    /* DTR complement */
  63
  64 /*
  65  * These are the definitions for the Modem Status Register
  66  */
  67 #define UART_MSR_DCD    0x80    /* Data Carrier Detect */
  68 #define UART_MSR_RI     0x40    /* Ring Indicator */
  69 #define UART_MSR_DSR    0x20    /* Data Set Ready */
  70 #define UART_MSR_CTS    0x10    /* Clear to Send */
  71 #define UART_MSR_DDCD   0x08    /* Delta DCD */
  72 #define UART_MSR_TERI   0x04    /* Trailing edge ring indicator */
  73 #define UART_MSR_DDSR   0x02    /* Delta DSR */
  74 #define UART_MSR_DCTS   0x01    /* Delta CTS */
  75 #define UART_MSR_ANY_DELTA 0x0F /* Any of the delta bits! */
  76
  77 #define UART_LSR_TEMT   0x40    /* Transmitter empty */
  78 #define UART_LSR_THRE   0x20    /* Transmit-hold-register empty */
  79 #define UART_LSR_BI     0x10    /* Break interrupt indicator */
  80 #define UART_LSR_FE     0x08    /* Frame error indicator */
  81 #define UART_LSR_PE     0x04    /* Parity error indicator */
  82 #define UART_LSR_OE     0x02    /* Overrun error indicator */
  83 #define UART_LSR_DR     0x01    /* Receiver data ready */
  84 #define UART_LSR_INT_ANY 0x1E   /* Any of the lsr-interrupt-triggering status bits */
  85
  86 /* Interrupt trigger levels. The byte-counts are for 16550A - in newer UARTs the byte-count for each ITL is higher. */
  87
  88 #define UART_FCR_ITL_1      0x00 /* 1 byte ITL */
  89 #define UART_FCR_ITL_2      0x40 /* 4 bytes ITL */
  90 #define UART_FCR_ITL_3      0x80 /* 8 bytes ITL */
  91 #define UART_FCR_ITL_4      0xC0 /* 14 bytes ITL */
  92
  93 #define UART_FCR_DMS        0x08    /* DMA Mode Select */
  94 #define UART_FCR_XFR        0x04    /* XMIT Fifo Reset */
  95 #define UART_FCR_RFR        0x02    /* RCVR Fifo Reset */
  96 #define UART_FCR_FE         0x01    /* FIFO Enable */
  97
  98 #define MAX_XMIT_RETRY      4
  99
 100 #ifdef DEBUG_SERIAL
 101 #define DPRINTF(fmt, ...) \
 102 do { fprintf(stderr, "serial: " fmt , ## __VA_ARGS__); } while (0)
 103 #else
 104 #define DPRINTF(fmt, ...) \
 105 do {} while (0)
 106 #endif
 107
 108 static void serial_receive1(void *opaque, const uint8_t *buf, int size);
 109 static void serial_xmit(SerialState *s);
 110
 111 static inline void recv_fifo_put(SerialState *s, uint8_t chr)
 112 {
 113     /* Receive overruns do not overwrite FIFO contents. */
 114     if (!fifo8_is_full(&s->recv_fifo)) {
 115         fifo8_push(&s->recv_fifo, chr);
 116     } else {
 117         s->lsr |= UART_LSR_OE;
 118     }
 119 }
 120
 121 static void serial_update_irq(SerialState *s)
 122 {
 123     uint8_t tmp_iir = UART_IIR_NO_INT;
 124
 125     if ((s->ier & UART_IER_RLSI) && (s->lsr & UART_LSR_INT_ANY)) {
 126         tmp_iir = UART_IIR_RLSI;
 127     } else if ((s->ier & UART_IER_RDI) && s->timeout_ipending) {
 128         /* Note that(s->ier & UART_IER_RDI) can mask this interrupt,
 129          * this is not in the specification but is observed on existing
 130          * hardware.  */
 131         tmp_iir = UART_IIR_CTI;
 132     } else if ((s->ier & UART_IER_RDI) && (s->lsr & UART_LSR_DR) &&
 133                (!(s->fcr & UART_FCR_FE) ||
 134                 s->recv_fifo.num >= s->recv_fifo_itl)) {
 135         tmp_iir = UART_IIR_RDI;
 136     } else if ((s->ier & UART_IER_THRI) && s->thr_ipending) {
 137         tmp_iir = UART_IIR_THRI;
 138     } else if ((s->ier & UART_IER_MSI) && (s->msr & UART_MSR_ANY_DELTA)) {
 139         tmp_iir = UART_IIR_MSI;
 140     }
 141
 142     s->iir = tmp_iir | (s->iir & 0xF0);
 143
 144     if (tmp_iir != UART_IIR_NO_INT) {
 145         qemu_irq_raise(s->irq);
 146     } else {
 147         qemu_irq_lower(s->irq);
 148     }
 149 }
 150
 151 static void serial_update_parameters(SerialState *s)
 152 {
 153     int speed, parity, data_bits, stop_bits, frame_size;
 154     QEMUSerialSetParams ssp;
 155
 156     if (s->divider == 0 || s->divider > s->baudbase) {
 157         return;
 158     }
 159
 160     /* Start bit. */
 161     frame_size = 1;
 162     if (s->lcr & 0x08) {
 163         /* Parity bit. */
 164         frame_size++;
 165         if (s->lcr & 0x10)
 166             parity = 'E';
 167         else
 168             parity = 'O';
 169     } else {
 170             parity = 'N';
 171     }
 172     if (s->lcr & 0x04)
 173         stop_bits = 2;
 174     else
 175         stop_bits = 1;
 176
 177     data_bits = (s->lcr & 0x03) + 5;
 178     frame_size += data_bits + stop_bits;
 179     speed = s->baudbase / s->divider;
 180     ssp.speed = speed;
 181     ssp.parity = parity;
 182     ssp.data_bits = data_bits;
 183     ssp.stop_bits = stop_bits;
 184     s->char_transmit_time =  (NANOSECONDS_PER_SECOND / speed) * frame_size;
 185     qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_SERIAL_SET_PARAMS, &ssp);
 186
 187     DPRINTF("speed=%d parity=%c data=%d stop=%d\n",
 188            speed, parity, data_bits, stop_bits);
 189 }
 190
 191 static void serial_update_msl(SerialState *s)
 192 {
 193     uint8_t omsr;
 194     int flags;
 195
 196     timer_del(s->modem_status_poll);
 197
 198     if (qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_SERIAL_GET_TIOCM,
 199                           &flags) == -ENOTSUP) {
 200         s->poll_msl = -1;
 201         return;
 202     }
 203
 204     omsr = s->msr;
 205
 206     s->msr = (flags & CHR_TIOCM_CTS) ? s->msr | UART_MSR_CTS : s->msr & ~UART_MSR_CTS;
 207     s->msr = (flags & CHR_TIOCM_DSR) ? s->msr | UART_MSR_DSR : s->msr & ~UART_MSR_DSR;
 208     s->msr = (flags & CHR_TIOCM_CAR) ? s->msr | UART_MSR_DCD : s->msr & ~UART_MSR_DCD;
 209     s->msr = (flags & CHR_TIOCM_RI) ? s->msr | UART_MSR_RI : s->msr & ~UART_MSR_RI;
 210
 211     if (s->msr != omsr) {
 212          /* Set delta bits */
 213          s->msr = s->msr | ((s->msr >> 4) ^ (omsr >> 4));
 214          /* UART_MSR_TERI only if change was from 1 -> 0 */
 215          if ((s->msr & UART_MSR_TERI) && !(omsr & UART_MSR_RI))
 216              s->msr &= ~UART_MSR_TERI;
 217          serial_update_irq(s);
 218     }
 219
 220     /* The real 16550A apparently has a 250ns response latency to line status changes.
 221        We'll be lazy and poll only every 10ms, and only poll it at all if MSI interrupts are turned on */
 222
 223     if (s->poll_msl) {
 224         timer_mod(s->modem_status_poll, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) +
 225                   NANOSECONDS_PER_SECOND / 100);
 226     }
 227 }
 228
 229 static gboolean serial_watch_cb(GIOChannel *chan, GIOCondition cond,
 230                                 void *opaque)
 231 {
 232     SerialState *s = opaque;
 233     s->watch_tag = 0;
 234     serial_xmit(s);
 235     return FALSE;
 236 }
 237
 238 static void serial_xmit(SerialState *s)
 239 {
 240     do {
 241         assert(!(s->lsr & UART_LSR_TEMT));
 242         if (s->tsr_retry == 0) {
 243             assert(!(s->lsr & UART_LSR_THRE));
 244
 245             if (s->fcr & UART_FCR_FE) {
 246                 assert(!fifo8_is_empty(&s->xmit_fifo));
 247                 s->tsr = fifo8_pop(&s->xmit_fifo);
 248                 if (!s->xmit_fifo.num) {
 249                     s->lsr |= UART_LSR_THRE;
 250                 }
 251             } else {
 252                 s->tsr = s->thr;
 253                 s->lsr |= UART_LSR_THRE;
 254             }
 255             if ((s->lsr & UART_LSR_THRE) && !s->thr_ipending) {
 256                 s->thr_ipending = 1;
 257                 serial_update_irq(s);
 258             }
 259         }
 260
 261         if (s->mcr & UART_MCR_LOOP) {
 262             /* in loopback mode, say that we just received a char */
 263             serial_receive1(s, &s->tsr, 1);
 264         } else if (qemu_chr_fe_write(&s->chr, &s->tsr, 1) != 1 &&
 265                    s->tsr_retry < MAX_XMIT_RETRY) {
 266             assert(s->watch_tag == 0);
 267             s->watch_tag =
 268                 qemu_chr_fe_add_watch(&s->chr, G_IO_OUT | G_IO_HUP,
 269                                       serial_watch_cb, s);
 270             if (s->watch_tag > 0) {
 271                 s->tsr_retry++;
 272                 return;
 273             }
 274         }
 275         s->tsr_retry = 0;
 276
 277         /* Transmit another byte if it is already available. It is only
 278            possible when FIFO is enabled and not empty. */
 279     } while (!(s->lsr & UART_LSR_THRE));
 280
 281     s->last_xmit_ts = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
 282     s->lsr |= UART_LSR_TEMT;
 283 }
 284
 285 /* Setter for FCR.
 286    is_load flag means, that value is set while loading VM state
 287    and interrupt should not be invoked */
 288 static void serial_write_fcr(SerialState *s, uint8_t val)
 289 {
 290     /* Set fcr - val only has the bits that are supposed to "stick" */
 291     s->fcr = val;
 292
 293     if (val & UART_FCR_FE) {
 294         s->iir |= UART_IIR_FE;
 295         /* Set recv_fifo trigger Level */
 296         switch (val & 0xC0) {
 297         case UART_FCR_ITL_1:
 298             s->recv_fifo_itl = 1;
 299             break;
 300         case UART_FCR_ITL_2:
 301             s->recv_fifo_itl = 4;
 302             break;
 303         case UART_FCR_ITL_3:
 304             s->recv_fifo_itl = 8;
 305             break;
 306         case UART_FCR_ITL_4:
 307             s->recv_fifo_itl = 14;
 308             break;
 309         }
 310     } else {
 311         s->iir &= ~UART_IIR_FE;
 312     }
 313 }
 314
 315 static void serial_update_tiocm(SerialState *s)
 316 {
 317     int flags;
 318
 319     qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_SERIAL_GET_TIOCM, &flags);
 320
 321     flags &= ~(CHR_TIOCM_RTS | CHR_TIOCM_DTR);
 322
 323     if (s->mcr & UART_MCR_RTS) {
 324         flags |= CHR_TIOCM_RTS;
 325     }
 326     if (s->mcr & UART_MCR_DTR) {
 327         flags |= CHR_TIOCM_DTR;
 328     }
 329
 330     qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_SERIAL_SET_TIOCM, &flags);
 331 }
 332
 333 static void serial_ioport_write(void *opaque, hwaddr addr, uint64_t val,
 334                                 unsigned size)
 335 {
 336     SerialState *s = opaque;
 337
 338     addr &= 7;
 339     DPRINTF("write addr=0x%" HWADDR_PRIx " val=0x%" PRIx64 "\n", addr, val);
 340     switch(addr) {
 341     default:
 342     case 0:
 343         if (s->lcr & UART_LCR_DLAB) {
 344             s->divider = (s->divider & 0xff00) | val;
 345             serial_update_parameters(s);
 346         } else {
 347             s->thr = (uint8_t) val;
 348             if(s->fcr & UART_FCR_FE) {
 349                 /* xmit overruns overwrite data, so make space if needed */
 350                 if (fifo8_is_full(&s->xmit_fifo)) {
 351                     fifo8_pop(&s->xmit_fifo);
 352                 }
 353                 fifo8_push(&s->xmit_fifo, s->thr);
 354             }
 355             s->thr_ipending = 0;
 356             s->lsr &= ~UART_LSR_THRE;
 357             s->lsr &= ~UART_LSR_TEMT;
 358             serial_update_irq(s);
 359             if (s->tsr_retry == 0) {
 360                 serial_xmit(s);
 361             }
 362         }
 363         break;
 364     case 1:
 365         if (s->lcr & UART_LCR_DLAB) {
 366             s->divider = (s->divider & 0x00ff) | (val << 8);
 367             serial_update_parameters(s);
 368         } else {
 369             uint8_t changed = (s->ier ^ val) & 0x0f;
 370             s->ier = val & 0x0f;
 371             /* If the backend device is a real serial port, turn polling of the modem
 372              * status lines on physical port on or off depending on UART_IER_MSI state.
 373              */
 374             if ((changed & UART_IER_MSI) && s->poll_msl >= 0) {
 375                 if (s->ier & UART_IER_MSI) {
 376                      s->poll_msl = 1;
 377                      serial_update_msl(s);
 378                 } else {
 379                      timer_del(s->modem_status_poll);
 380                      s->poll_msl = 0;
 381                 }
 382             }
 383
 384             /* Turning on the THRE interrupt on IER can trigger the interrupt
 385              * if LSR.THRE=1, even if it had been masked before by reading IIR.
 386              * This is not in the datasheet, but Windows relies on it.  It is
 387              * unclear if THRE has to be resampled every time THRI becomes
 388              * 1, or only on the rising edge.  Bochs does the latter, and Windows
 389              * always toggles IER to all zeroes and back to all ones, so do the
 390              * same.
 391              *
 392              * If IER.THRI is zero, thr_ipending is not used.  Set it to zero
 393              * so that the thr_ipending subsection is not migrated.
 394              */
 395             if (changed & UART_IER_THRI) {
 396                 if ((s->ier & UART_IER_THRI) && (s->lsr & UART_LSR_THRE)) {
 397                     s->thr_ipending = 1;
 398                 } else {
 399                     s->thr_ipending = 0;
 400                 }
 401             }
 402
 403             if (changed) {
 404                 serial_update_irq(s);
 405             }
 406         }
 407         break;
 408     case 2:
 409         /* Did the enable/disable flag change? If so, make sure FIFOs get flushed */
 410         if ((val ^ s->fcr) & UART_FCR_FE) {
 411             val |= UART_FCR_XFR | UART_FCR_RFR;
 412         }
 413
 414         /* FIFO clear */
 415
 416         if (val & UART_FCR_RFR) {
 417             s->lsr &= ~(UART_LSR_DR | UART_LSR_BI);
 418             timer_del(s->fifo_timeout_timer);
 419             s->timeout_ipending = 0;
 420             fifo8_reset(&s->recv_fifo);
 421         }
 422
 423         if (val & UART_FCR_XFR) {
 424             s->lsr |= UART_LSR_THRE;
 425             s->thr_ipending = 1;
 426             fifo8_reset(&s->xmit_fifo);
 427         }
 428
 429         serial_write_fcr(s, val & 0xC9);
 430         serial_update_irq(s);
 431         break;
 432     case 3:
 433         {
 434             int break_enable;
 435             s->lcr = val;
 436             serial_update_parameters(s);
 437             break_enable = (val >> 6) & 1;
 438             if (break_enable != s->last_break_enable) {
 439                 s->last_break_enable = break_enable;
 440                 qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_SERIAL_SET_BREAK,
 441                                   &break_enable);
 442             }
 443         }
 444         break;
 445     case 4:
 446         {
 447             int old_mcr = s->mcr;
 448             s->mcr = val & 0x1f;
 449             if (val & UART_MCR_LOOP)
 450                 break;
 451
 452             if (s->poll_msl >= 0 && old_mcr != s->mcr) {
 453                 serial_update_tiocm(s);
 454                 /* Update the modem status after a one-character-send wait-time, since there may be a response
 455                    from the device/computer at the other end of the serial line */
 456                 timer_mod(s->modem_status_poll, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + s->char_transmit_time);
 457             }
 458         }
 459         break;
 460     case 5:
 461         break;
 462     case 6:
 463         break;
 464     case 7:
 465         s->scr = val;
 466         break;
 467     }
 468 }
 469
 470 static uint64_t serial_ioport_read(void *opaque, hwaddr addr, unsigned size)
 471 {
 472     SerialState *s = opaque;
 473     uint32_t ret;
 474
 475     addr &= 7;
 476     switch(addr) {
 477     default:
 478     case 0:
 479         if (s->lcr & UART_LCR_DLAB) {
 480             ret = s->divider & 0xff;
 481         } else {
 482             if(s->fcr & UART_FCR_FE) {
 483                 ret = fifo8_is_empty(&s->recv_fifo) ?
 484                             0 : fifo8_pop(&s->recv_fifo);
 485                 if (s->recv_fifo.num == 0) {
 486                     s->lsr &= ~(UART_LSR_DR | UART_LSR_BI);
 487                 } else {
 488                     timer_mod(s->fifo_timeout_timer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + s->char_transmit_time * 4);
 489                 }
 490                 s->timeout_ipending = 0;
 491             } else {
 492                 ret = s->rbr;
 493                 s->lsr &= ~(UART_LSR_DR | UART_LSR_BI);
 494             }
 495             serial_update_irq(s);
 496             if (!(s->mcr & UART_MCR_LOOP)) {
 497                 /* in loopback mode, don't receive any data */
 498                 qemu_chr_fe_accept_input(&s->chr);
 499             }
 500         }
 501         break;
 502     case 1:
 503         if (s->lcr & UART_LCR_DLAB) {
 504             ret = (s->divider >> 8) & 0xff;
 505         } else {
 506             ret = s->ier;
 507         }
 508         break;
 509     case 2:
 510         ret = s->iir;
 511         if ((ret & UART_IIR_ID) == UART_IIR_THRI) {
 512             s->thr_ipending = 0;
 513             serial_update_irq(s);
 514         }
 515         break;
 516     case 3:
 517         ret = s->lcr;
 518         break;
 519     case 4:
 520         ret = s->mcr;
 521         break;
 522     case 5:
 523         ret = s->lsr;
 524         /* Clear break and overrun interrupts */
 525         if (s->lsr & (UART_LSR_BI|UART_LSR_OE)) {
 526             s->lsr &= ~(UART_LSR_BI|UART_LSR_OE);
 527             serial_update_irq(s);
 528         }
 529         break;
 530     case 6:
 531         if (s->mcr & UART_MCR_LOOP) {
 532             /* in loopback, the modem output pins are connected to the
 533                inputs */
 534             ret = (s->mcr & 0x0c) << 4;
 535             ret |= (s->mcr & 0x02) << 3;
 536             ret |= (s->mcr & 0x01) << 5;
 537         } else {
 538             if (s->poll_msl >= 0)
 539                 serial_update_msl(s);
 540             ret = s->msr;
 541             /* Clear delta bits & msr int after read, if they were set */
 542             if (s->msr & UART_MSR_ANY_DELTA) {
 543                 s->msr &= 0xF0;
 544                 serial_update_irq(s);
 545             }
 546         }
 547         break;
 548     case 7:
 549         ret = s->scr;
 550         break;
 551     }
 552     DPRINTF("read addr=0x%" HWADDR_PRIx " val=0x%02x\n", addr, ret);
 553     return ret;
 554 }
 555
 556 static int serial_can_receive(SerialState *s)
 557 {
 558     if(s->fcr & UART_FCR_FE) {
 559         if (s->recv_fifo.num < UART_FIFO_LENGTH) {
 560             /*
 561              * Advertise (fifo.itl - fifo.count) bytes when count < ITL, and 1
 562              * if above. If UART_FIFO_LENGTH - fifo.count is advertised the
 563              * effect will be to almost always fill the fifo completely before
 564              * the guest has a chance to respond, effectively overriding the ITL
 565              * that the guest has set.
 566              */
 567             return (s->recv_fifo.num <= s->recv_fifo_itl) ?
 568                         s->recv_fifo_itl - s->recv_fifo.num : 1;
 569         } else {
 570             return 0;
 571         }
 572     } else {
 573         return !(s->lsr & UART_LSR_DR);
 574     }
 575 }
 576
 577 static void serial_receive_break(SerialState *s)
 578 {
 579     s->rbr = 0;
 580     /* When the LSR_DR is set a null byte is pushed into the fifo */
 581     recv_fifo_put(s, '\0');
 582     s->lsr |= UART_LSR_BI | UART_LSR_DR;
 583     serial_update_irq(s);
 584 }
 585
 586 /* There's data in recv_fifo and s->rbr has not been read for 4 char transmit times */
 587 static void fifo_timeout_int (void *opaque) {
 588     SerialState *s = opaque;
 589     if (s->recv_fifo.num) {
 590         s->timeout_ipending = 1;
 591         serial_update_irq(s);
 592     }
 593 }
 594
 595 static int serial_can_receive1(void *opaque)
 596 {
 597     SerialState *s = opaque;
 598     return serial_can_receive(s);
 599 }
 600
 601 static void serial_receive1(void *opaque, const uint8_t *buf, int size)
 602 {
 603     SerialState *s = opaque;
 604
 605     if (s->wakeup) {
 606         qemu_system_wakeup_request(QEMU_WAKEUP_REASON_OTHER);
 607     }
 608     if(s->fcr & UART_FCR_FE) {
 609         int i;
 610         for (i = 0; i < size; i++) {
 611             recv_fifo_put(s, buf[i]);
 612         }
 613         s->lsr |= UART_LSR_DR;
 614         /* call the timeout receive callback in 4 char transmit time */
 615         timer_mod(s->fifo_timeout_timer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + s->char_transmit_time * 4);
 616     } else {
 617         if (s->lsr & UART_LSR_DR)
 618             s->lsr |= UART_LSR_OE;
 619         s->rbr = buf[0];
 620         s->lsr |= UART_LSR_DR;
 621     }
 622     serial_update_irq(s);
 623 }
 624
 625 static void serial_event(void *opaque, int event)
 626 {
 627     SerialState *s = opaque;
 628     DPRINTF("event %x\n", event);
 629     if (event == CHR_EVENT_BREAK)
 630         serial_receive_break(s);
 631 }
 632
 633 static void serial_pre_save(void *opaque)
 634 {
 635     SerialState *s = opaque;
 636     s->fcr_vmstate = s->fcr;
 637 }
 638
 639 static int serial_pre_load(void *opaque)
 640 {
 641     SerialState *s = opaque;
 642     s->thr_ipending = -1;
 643     s->poll_msl = -1;
 644     return 0;
 645 }
 646
 647 static int serial_post_load(void *opaque, int version_id)
 648 {
 649     SerialState *s = opaque;
 650
 651     if (version_id < 3) {
 652         s->fcr_vmstate = 0;
 653     }
 654     if (s->thr_ipending == -1) {
 655         s->thr_ipending = ((s->iir & UART_IIR_ID) == UART_IIR_THRI);
 656     }
 657
 658     if (s->tsr_retry > 0) {
 659         /* tsr_retry > 0 implies LSR.TEMT = 0 (transmitter not empty).  */
 660         if (s->lsr & UART_LSR_TEMT) {
 661             error_report("inconsistent state in serial device "
 662                          "(tsr empty, tsr_retry=%d", s->tsr_retry);
 663             return -1;
 664         }
 665
 666         if (s->tsr_retry > MAX_XMIT_RETRY) {
 667             s->tsr_retry = MAX_XMIT_RETRY;
 668         }
 669
 670         assert(s->watch_tag == 0);
 671         s->watch_tag = qemu_chr_fe_add_watch(&s->chr, G_IO_OUT | G_IO_HUP,
 672                                              serial_watch_cb, s);
 673     } else {
 674         /* tsr_retry == 0 implies LSR.TEMT = 1 (transmitter empty).  */
 675         if (!(s->lsr & UART_LSR_TEMT)) {
 676             error_report("inconsistent state in serial device "
 677                          "(tsr not empty, tsr_retry=0");
 678             return -1;
 679         }
 680     }
 681
 682     s->last_break_enable = (s->lcr >> 6) & 1;
 683     /* Initialize fcr via setter to perform essential side-effects */
 684     serial_write_fcr(s, s->fcr_vmstate);
 685     serial_update_parameters(s);
 686     return 0;
 687 }
 688
 689 static bool serial_thr_ipending_needed(void *opaque)
 690 {
 691     SerialState *s = opaque;
 692
 693     if (s->ier & UART_IER_THRI) {
 694         bool expected_value = ((s->iir & UART_IIR_ID) == UART_IIR_THRI);
 695         return s->thr_ipending != expected_value;
 696     } else {
 697         /* LSR.THRE will be sampled again when the interrupt is
 698          * enabled.  thr_ipending is not used in this case, do
 699          * not migrate it.
 700          */
 701         return false;
 702     }
 703 }
 704
 705 static const VMStateDescription vmstate_serial_thr_ipending = {
 706     .name = "serial/thr_ipending",
 707     .version_id = 1,
 708     .minimum_version_id = 1,
 709     .needed = serial_thr_ipending_needed,
 710     .fields = (VMStateField[]) {
 711         VMSTATE_INT32(thr_ipending, SerialState),
 712         VMSTATE_END_OF_LIST()
 713     }
 714 };
 715
 716 static bool serial_tsr_needed(void *opaque)
 717 {
 718     SerialState *s = (SerialState *)opaque;
 719     return s->tsr_retry != 0;
 720 }
 721
 722 static const VMStateDescription vmstate_serial_tsr = {
 723     .name = "serial/tsr",
 724     .version_id = 1,
 725     .minimum_version_id = 1,
 726     .needed = serial_tsr_needed,
 727     .fields = (VMStateField[]) {
 728         VMSTATE_UINT32(tsr_retry, SerialState),
 729         VMSTATE_UINT8(thr, SerialState),
 730         VMSTATE_UINT8(tsr, SerialState),
 731         VMSTATE_END_OF_LIST()
 732     }
 733 };
 734
 735 static bool serial_recv_fifo_needed(void *opaque)
 736 {
 737     SerialState *s = (SerialState *)opaque;
 738     return !fifo8_is_empty(&s->recv_fifo);
 739
 740 }
 741
 742 static const VMStateDescription vmstate_serial_recv_fifo = {
 743     .name = "serial/recv_fifo",
 744     .version_id = 1,
 745     .minimum_version_id = 1,
 746     .needed = serial_recv_fifo_needed,
 747     .fields = (VMStateField[]) {
 748         VMSTATE_STRUCT(recv_fifo, SerialState, 1, vmstate_fifo8, Fifo8),
 749         VMSTATE_END_OF_LIST()
 750     }
 751 };
 752
 753 static bool serial_xmit_fifo_needed(void *opaque)
 754 {
 755     SerialState *s = (SerialState *)opaque;
 756     return !fifo8_is_empty(&s->xmit_fifo);
 757 }
 758
 759 static const VMStateDescription vmstate_serial_xmit_fifo = {
 760     .name = "serial/xmit_fifo",
 761     .version_id = 1,
 762     .minimum_version_id = 1,
 763     .needed = serial_xmit_fifo_needed,
 764     .fields = (VMStateField[]) {
 765         VMSTATE_STRUCT(xmit_fifo, SerialState, 1, vmstate_fifo8, Fifo8),
 766         VMSTATE_END_OF_LIST()
 767     }
 768 };
 769
 770 static bool serial_fifo_timeout_timer_needed(void *opaque)
 771 {
 772     SerialState *s = (SerialState *)opaque;
 773     return timer_pending(s->fifo_timeout_timer);
 774 }
 775
 776 static const VMStateDescription vmstate_serial_fifo_timeout_timer = {
 777     .name = "serial/fifo_timeout_timer",
 778     .version_id = 1,
 779     .minimum_version_id = 1,
 780     .needed = serial_fifo_timeout_timer_needed,
 781     .fields = (VMStateField[]) {
 782         VMSTATE_TIMER_PTR(fifo_timeout_timer, SerialState),
 783         VMSTATE_END_OF_LIST()
 784     }
 785 };
 786
 787 static bool serial_timeout_ipending_needed(void *opaque)
 788 {
 789     SerialState *s = (SerialState *)opaque;
 790     return s->timeout_ipending != 0;
 791 }
 792
 793 static const VMStateDescription vmstate_serial_timeout_ipending = {
 794     .name = "serial/timeout_ipending",
 795     .version_id = 1,
 796     .minimum_version_id = 1,
 797     .needed = serial_timeout_ipending_needed,
 798     .fields = (VMStateField[]) {
 799         VMSTATE_INT32(timeout_ipending, SerialState),
 800         VMSTATE_END_OF_LIST()
 801     }
 802 };
 803
 804 static bool serial_poll_needed(void *opaque)
 805 {
 806     SerialState *s = (SerialState *)opaque;
 807     return s->poll_msl >= 0;
 808 }
 809
 810 static const VMStateDescription vmstate_serial_poll = {
 811     .name = "serial/poll",
 812     .version_id = 1,
 813     .needed = serial_poll_needed,
 814     .minimum_version_id = 1,
 815     .fields = (VMStateField[]) {
 816         VMSTATE_INT32(poll_msl, SerialState),
 817         VMSTATE_TIMER_PTR(modem_status_poll, SerialState),
 818         VMSTATE_END_OF_LIST()
 819     }
 820 };
 821
 822 const VMStateDescription vmstate_serial = {
 823     .name = "serial",
 824     .version_id = 3,
 825     .minimum_version_id = 2,
 826     .pre_save = serial_pre_save,
 827     .pre_load = serial_pre_load,
 828     .post_load = serial_post_load,
 829     .fields = (VMStateField[]) {
 830         VMSTATE_UINT16_V(divider, SerialState, 2),
 831         VMSTATE_UINT8(rbr, SerialState),
 832         VMSTATE_UINT8(ier, SerialState),
 833         VMSTATE_UINT8(iir, SerialState),
 834         VMSTATE_UINT8(lcr, SerialState),
 835         VMSTATE_UINT8(mcr, SerialState),
 836         VMSTATE_UINT8(lsr, SerialState),
 837         VMSTATE_UINT8(msr, SerialState),
 838         VMSTATE_UINT8(scr, SerialState),
 839         VMSTATE_UINT8_V(fcr_vmstate, SerialState, 3),
 840         VMSTATE_END_OF_LIST()
 841     },
 842     .subsections = (const VMStateDescription*[]) {
 843         &vmstate_serial_thr_ipending,
 844         &vmstate_serial_tsr,
 845         &vmstate_serial_recv_fifo,
 846         &vmstate_serial_xmit_fifo,
 847         &vmstate_serial_fifo_timeout_timer,
 848         &vmstate_serial_timeout_ipending,
 849         &vmstate_serial_poll,
 850         NULL
 851     }
 852 };
 853
 854 static void serial_reset(void *opaque)
 855 {
 856     SerialState *s = opaque;
 857
 858     if (s->watch_tag > 0) {
 859         g_source_remove(s->watch_tag);
 860         s->watch_tag = 0;
 861     }
 862
 863     s->rbr = 0;
 864     s->ier = 0;
 865     s->iir = UART_IIR_NO_INT;
 866     s->lcr = 0;
 867     s->lsr = UART_LSR_TEMT | UART_LSR_THRE;
 868     s->msr = UART_MSR_DCD | UART_MSR_DSR | UART_MSR_CTS;
 869     /* Default to 9600 baud, 1 start bit, 8 data bits, 1 stop bit, no parity. */
 870     s->divider = 0x0C;
 871     s->mcr = UART_MCR_OUT2;
 872     s->scr = 0;
 873     s->tsr_retry = 0;
 874     s->char_transmit_time = (NANOSECONDS_PER_SECOND / 9600) * 10;
 875     s->poll_msl = 0;
 876
 877     s->timeout_ipending = 0;
 878     timer_del(s->fifo_timeout_timer);
 879     timer_del(s->modem_status_poll);
 880
 881     fifo8_reset(&s->recv_fifo);
 882     fifo8_reset(&s->xmit_fifo);
 883
 884     s->last_xmit_ts = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
 885
 886     s->thr_ipending = 0;
 887     s->last_break_enable = 0;
 888     qemu_irq_lower(s->irq);
 889
 890     serial_update_msl(s);
 891     s->msr &= ~UART_MSR_ANY_DELTA;
 892 }
 893
 894 static int serial_be_change(void *opaque)
 895 {
 896     SerialState *s = opaque;
 897
 898     qemu_chr_fe_set_handlers(&s->chr, serial_can_receive1, serial_receive1,
 899                              serial_event, serial_be_change, s, NULL, true);
 900
 901     serial_update_parameters(s);
 902
 903     qemu_chr_fe_ioctl(&s->chr, CHR_IOCTL_SERIAL_SET_BREAK,
 904                       &s->last_break_enable);
 905
 906     s->poll_msl = (s->ier & UART_IER_MSI) ? 1 : 0;
 907     serial_update_msl(s);
 908
 909     if (s->poll_msl >= 0 && !(s->mcr & UART_MCR_LOOP)) {
 910         serial_update_tiocm(s);
 911     }
 912
 913     if (s->watch_tag > 0) {
 914         g_source_remove(s->watch_tag);
 915         s->watch_tag = qemu_chr_fe_add_watch(&s->chr, G_IO_OUT | G_IO_HUP,
 916                                              serial_watch_cb, s);
 917     }
 918
 919     return 0;
 920 }
 921
 922 void serial_realize_core(SerialState *s, Error **errp)
 923 {
 924     if (!qemu_chr_fe_backend_connected(&s->chr)) {
 925         error_setg(errp, "Can't create serial device, empty char device");
 926         return;
 927     }
 928
 929     s->modem_status_poll = timer_new_ns(QEMU_CLOCK_VIRTUAL, (QEMUTimerCB *) serial_update_msl, s);
 930
 931     s->fifo_timeout_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, (QEMUTimerCB *) fifo_timeout_int, s);
 932     qemu_register_reset(serial_reset, s);
 933
 934     qemu_chr_fe_set_handlers(&s->chr, serial_can_receive1, serial_receive1,
 935                              serial_event, serial_be_change, s, NULL, true);
 936     fifo8_create(&s->recv_fifo, UART_FIFO_LENGTH);
 937     fifo8_create(&s->xmit_fifo, UART_FIFO_LENGTH);
 938     serial_reset(s);
 939 }
 940
 941 void serial_exit_core(SerialState *s)
 942 {
 943     qemu_chr_fe_deinit(&s->chr, false);
 944
 945     timer_del(s->modem_status_poll);
 946     timer_free(s->modem_status_poll);
 947
 948     timer_del(s->fifo_timeout_timer);
 949     timer_free(s->fifo_timeout_timer);
 950
 951     fifo8_destroy(&s->recv_fifo);
 952     fifo8_destroy(&s->xmit_fifo);
 953
 954     qemu_unregister_reset(serial_reset, s);
 955 }
 956
 957 /* Change the main reference oscillator frequency. */
 958 void serial_set_frequency(SerialState *s, uint32_t frequency)
 959 {
 960     s->baudbase = frequency;
 961     serial_update_parameters(s);
 962 }
 963
 964 const MemoryRegionOps serial_io_ops = {
 965     .read = serial_ioport_read,
 966     .write = serial_ioport_write,
 967     .impl = {
 968         .min_access_size = 1,
 969         .max_access_size = 1,
 970     },
 971     .endianness = DEVICE_LITTLE_ENDIAN,
 972 };
 973
 974 SerialState *serial_init(int base, qemu_irq irq, int baudbase,
 975                          Chardev *chr, MemoryRegion *system_io)
 976 {
 977     SerialState *s;
 978
 979     s = g_malloc0(sizeof(SerialState));
 980
 981     s->irq = irq;
 982     s->baudbase = baudbase;
 983     qemu_chr_fe_init(&s->chr, chr, &error_abort);
 984     serial_realize_core(s, &error_fatal);
 985
 986     vmstate_register(NULL, base, &vmstate_serial, s);
 987
 988     memory_region_init_io(&s->io, NULL, &serial_io_ops, s, "serial", 8);
 989     memory_region_add_subregion(system_io, base, &s->io);
 990
 991     return s;
 992 }
 993
 994 /* Memory mapped interface */
 995 static uint64_t serial_mm_read(void *opaque, hwaddr addr,
 996                                unsigned size)
 997 {
 998     SerialState *s = opaque;
 999     return serial_ioport_read(s, addr >> s->it_shift, 1);
1000 }
1001
1002 static void serial_mm_write(void *opaque, hwaddr addr,
1003                             uint64_t value, unsigned size)
1004 {
1005     SerialState *s = opaque;
1006     value &= ~0u >> (32 - (size * 8));
1007     serial_ioport_write(s, addr >> s->it_shift, value, 1);
1008 }
1009
1010 static const MemoryRegionOps serial_mm_ops[3] = {
1011     [DEVICE_NATIVE_ENDIAN] = {
1012         .read = serial_mm_read,
1013         .write = serial_mm_write,
1014         .endianness = DEVICE_NATIVE_ENDIAN,
1015     },
1016     [DEVICE_LITTLE_ENDIAN] = {
1017         .read = serial_mm_read,
1018         .write = serial_mm_write,
1019         .endianness = DEVICE_LITTLE_ENDIAN,
1020     },
1021     [DEVICE_BIG_ENDIAN] = {
1022         .read = serial_mm_read,
1023         .write = serial_mm_write,
1024         .endianness = DEVICE_BIG_ENDIAN,
1025     },
1026 };
1027
1028 SerialState *serial_mm_init(MemoryRegion *address_space,
1029                             hwaddr base, int it_shift,
1030                             qemu_irq irq, int baudbase,
1031                             Chardev *chr, enum device_endian end)
1032 {
1033     SerialState *s;
1034
1035     s = g_malloc0(sizeof(SerialState));
1036
1037     s->it_shift = it_shift;
1038     s->irq = irq;
1039     s->baudbase = baudbase;
1040     qemu_chr_fe_init(&s->chr, chr, &error_abort);
1041
1042     serial_realize_core(s, &error_fatal);
1043     vmstate_register(NULL, base, &vmstate_serial, s);
1044
1045     memory_region_init_io(&s->io, NULL, &serial_mm_ops[end], s,
1046                           "serial", 8 << it_shift);
1047     memory_region_add_subregion(address_space, base, &s->io);
1048     return s;
1049 }