2 * SMSC LAN9118 Ethernet interface emulation
4 * Copyright (c) 2009 CodeSourcery, LLC.
5 * Written by Paul Brook
7 * This code is licensed under the GNU GPL v2
9 * Contributions after 2012-01-13 are licensed under the terms of the
10 * GNU GPL, version 2 or (at your option) any later version.
13 #include "qemu/osdep.h"
14 #include "hw/sysbus.h"
16 #include "hw/devices.h"
17 #include "sysemu/sysemu.h"
18 #include "hw/ptimer.h"
23 //#define DEBUG_LAN9118
26 #define DPRINTF(fmt, ...) \
27 do { printf("lan9118: " fmt , ## __VA_ARGS__); } while (0)
28 #define BADF(fmt, ...) \
29 do { hw_error("lan9118: error: " fmt , ## __VA_ARGS__);} while (0)
31 #define DPRINTF(fmt, ...) do {} while(0)
32 #define BADF(fmt, ...) \
33 do { fprintf(stderr, "lan9118: error: " fmt , ## __VA_ARGS__);} while (0)
36 #define CSR_ID_REV 0x50
37 #define CSR_IRQ_CFG 0x54
38 #define CSR_INT_STS 0x58
39 #define CSR_INT_EN 0x5c
40 #define CSR_BYTE_TEST 0x64
41 #define CSR_FIFO_INT 0x68
42 #define CSR_RX_CFG 0x6c
43 #define CSR_TX_CFG 0x70
44 #define CSR_HW_CFG 0x74
45 #define CSR_RX_DP_CTRL 0x78
46 #define CSR_RX_FIFO_INF 0x7c
47 #define CSR_TX_FIFO_INF 0x80
48 #define CSR_PMT_CTRL 0x84
49 #define CSR_GPIO_CFG 0x88
50 #define CSR_GPT_CFG 0x8c
51 #define CSR_GPT_CNT 0x90
52 #define CSR_WORD_SWAP 0x98
53 #define CSR_FREE_RUN 0x9c
54 #define CSR_RX_DROP 0xa0
55 #define CSR_MAC_CSR_CMD 0xa4
56 #define CSR_MAC_CSR_DATA 0xa8
57 #define CSR_AFC_CFG 0xac
58 #define CSR_E2P_CMD 0xb0
59 #define CSR_E2P_DATA 0xb4
61 #define E2P_CMD_MAC_ADDR_LOADED 0x100
64 #define IRQ_INT 0x00001000
65 #define IRQ_EN 0x00000100
66 #define IRQ_POL 0x00000010
67 #define IRQ_TYPE 0x00000001
70 #define SW_INT 0x80000000
71 #define TXSTOP_INT 0x02000000
72 #define RXSTOP_INT 0x01000000
73 #define RXDFH_INT 0x00800000
74 #define TX_IOC_INT 0x00200000
75 #define RXD_INT 0x00100000
76 #define GPT_INT 0x00080000
77 #define PHY_INT 0x00040000
78 #define PME_INT 0x00020000
79 #define TXSO_INT 0x00010000
80 #define RWT_INT 0x00008000
81 #define RXE_INT 0x00004000
82 #define TXE_INT 0x00002000
83 #define TDFU_INT 0x00000800
84 #define TDFO_INT 0x00000400
85 #define TDFA_INT 0x00000200
86 #define TSFF_INT 0x00000100
87 #define TSFL_INT 0x00000080
88 #define RXDF_INT 0x00000040
89 #define RDFL_INT 0x00000020
90 #define RSFF_INT 0x00000010
91 #define RSFL_INT 0x00000008
92 #define GPIO2_INT 0x00000004
93 #define GPIO1_INT 0x00000002
94 #define GPIO0_INT 0x00000001
95 #define RESERVED_INT 0x7c001000
102 #define MAC_MII_ACC 6
103 #define MAC_MII_DATA 7
105 #define MAC_VLAN1 9 /* TODO */
106 #define MAC_VLAN2 10 /* TODO */
107 #define MAC_WUFF 11 /* TODO */
108 #define MAC_WUCSR 12 /* TODO */
110 #define MAC_CR_RXALL 0x80000000
111 #define MAC_CR_RCVOWN 0x00800000
112 #define MAC_CR_LOOPBK 0x00200000
113 #define MAC_CR_FDPX 0x00100000
114 #define MAC_CR_MCPAS 0x00080000
115 #define MAC_CR_PRMS 0x00040000
116 #define MAC_CR_INVFILT 0x00020000
117 #define MAC_CR_PASSBAD 0x00010000
118 #define MAC_CR_HO 0x00008000
119 #define MAC_CR_HPFILT 0x00002000
120 #define MAC_CR_LCOLL 0x00001000
121 #define MAC_CR_BCAST 0x00000800
122 #define MAC_CR_DISRTY 0x00000400
123 #define MAC_CR_PADSTR 0x00000100
124 #define MAC_CR_BOLMT 0x000000c0
125 #define MAC_CR_DFCHK 0x00000020
126 #define MAC_CR_TXEN 0x00000008
127 #define MAC_CR_RXEN 0x00000004
128 #define MAC_CR_RESERVED 0x7f404213
130 #define PHY_INT_ENERGYON 0x80
131 #define PHY_INT_AUTONEG_COMPLETE 0x40
132 #define PHY_INT_FAULT 0x20
133 #define PHY_INT_DOWN 0x10
134 #define PHY_INT_AUTONEG_LP 0x08
135 #define PHY_INT_PARFAULT 0x04
136 #define PHY_INT_AUTONEG_PAGE 0x02
138 #define GPT_TIMER_EN 0x20000000
147 /* state is a tx_state but we can't put enums in VMStateDescriptions. */
159 static const VMStateDescription vmstate_lan9118_packet
= {
160 .name
= "lan9118_packet",
162 .minimum_version_id
= 1,
163 .fields
= (VMStateField
[]) {
164 VMSTATE_UINT32(state
, LAN9118Packet
),
165 VMSTATE_UINT32(cmd_a
, LAN9118Packet
),
166 VMSTATE_UINT32(cmd_b
, LAN9118Packet
),
167 VMSTATE_INT32(buffer_size
, LAN9118Packet
),
168 VMSTATE_INT32(offset
, LAN9118Packet
),
169 VMSTATE_INT32(pad
, LAN9118Packet
),
170 VMSTATE_INT32(fifo_used
, LAN9118Packet
),
171 VMSTATE_INT32(len
, LAN9118Packet
),
172 VMSTATE_UINT8_ARRAY(data
, LAN9118Packet
, 2048),
173 VMSTATE_END_OF_LIST()
177 #define TYPE_LAN9118 "lan9118"
178 #define LAN9118(obj) OBJECT_CHECK(lan9118_state, (obj), TYPE_LAN9118)
181 SysBusDevice parent_obj
;
200 uint32_t free_timer_start
;
210 uint32_t mac_mii_acc
;
211 uint32_t mac_mii_data
;
215 uint32_t phy_control
;
216 uint32_t phy_advertise
;
218 uint32_t phy_int_mask
;
220 int32_t eeprom_writable
;
223 int32_t tx_fifo_size
;
225 LAN9118Packet tx_packet
;
227 int32_t tx_status_fifo_used
;
228 int32_t tx_status_fifo_head
;
229 uint32_t tx_status_fifo
[512];
231 int32_t rx_status_fifo_size
;
232 int32_t rx_status_fifo_used
;
233 int32_t rx_status_fifo_head
;
234 uint32_t rx_status_fifo
[896];
235 int32_t rx_fifo_size
;
236 int32_t rx_fifo_used
;
237 int32_t rx_fifo_head
;
238 uint32_t rx_fifo
[3360];
239 int32_t rx_packet_size_head
;
240 int32_t rx_packet_size_tail
;
241 int32_t rx_packet_size
[1024];
247 uint32_t write_word_prev_offset
;
248 uint32_t write_word_n
;
249 uint16_t write_word_l
;
250 uint16_t write_word_h
;
251 uint32_t read_word_prev_offset
;
252 uint32_t read_word_n
;
258 static const VMStateDescription vmstate_lan9118
= {
261 .minimum_version_id
= 1,
262 .fields
= (VMStateField
[]) {
263 VMSTATE_PTIMER(timer
, lan9118_state
),
264 VMSTATE_UINT32(irq_cfg
, lan9118_state
),
265 VMSTATE_UINT32(int_sts
, lan9118_state
),
266 VMSTATE_UINT32(int_en
, lan9118_state
),
267 VMSTATE_UINT32(fifo_int
, lan9118_state
),
268 VMSTATE_UINT32(rx_cfg
, lan9118_state
),
269 VMSTATE_UINT32(tx_cfg
, lan9118_state
),
270 VMSTATE_UINT32(hw_cfg
, lan9118_state
),
271 VMSTATE_UINT32(pmt_ctrl
, lan9118_state
),
272 VMSTATE_UINT32(gpio_cfg
, lan9118_state
),
273 VMSTATE_UINT32(gpt_cfg
, lan9118_state
),
274 VMSTATE_UINT32(word_swap
, lan9118_state
),
275 VMSTATE_UINT32(free_timer_start
, lan9118_state
),
276 VMSTATE_UINT32(mac_cmd
, lan9118_state
),
277 VMSTATE_UINT32(mac_data
, lan9118_state
),
278 VMSTATE_UINT32(afc_cfg
, lan9118_state
),
279 VMSTATE_UINT32(e2p_cmd
, lan9118_state
),
280 VMSTATE_UINT32(e2p_data
, lan9118_state
),
281 VMSTATE_UINT32(mac_cr
, lan9118_state
),
282 VMSTATE_UINT32(mac_hashh
, lan9118_state
),
283 VMSTATE_UINT32(mac_hashl
, lan9118_state
),
284 VMSTATE_UINT32(mac_mii_acc
, lan9118_state
),
285 VMSTATE_UINT32(mac_mii_data
, lan9118_state
),
286 VMSTATE_UINT32(mac_flow
, lan9118_state
),
287 VMSTATE_UINT32(phy_status
, lan9118_state
),
288 VMSTATE_UINT32(phy_control
, lan9118_state
),
289 VMSTATE_UINT32(phy_advertise
, lan9118_state
),
290 VMSTATE_UINT32(phy_int
, lan9118_state
),
291 VMSTATE_UINT32(phy_int_mask
, lan9118_state
),
292 VMSTATE_INT32(eeprom_writable
, lan9118_state
),
293 VMSTATE_UINT8_ARRAY(eeprom
, lan9118_state
, 128),
294 VMSTATE_INT32(tx_fifo_size
, lan9118_state
),
295 /* txp always points at tx_packet so need not be saved */
296 VMSTATE_STRUCT(tx_packet
, lan9118_state
, 0,
297 vmstate_lan9118_packet
, LAN9118Packet
),
298 VMSTATE_INT32(tx_status_fifo_used
, lan9118_state
),
299 VMSTATE_INT32(tx_status_fifo_head
, lan9118_state
),
300 VMSTATE_UINT32_ARRAY(tx_status_fifo
, lan9118_state
, 512),
301 VMSTATE_INT32(rx_status_fifo_size
, lan9118_state
),
302 VMSTATE_INT32(rx_status_fifo_used
, lan9118_state
),
303 VMSTATE_INT32(rx_status_fifo_head
, lan9118_state
),
304 VMSTATE_UINT32_ARRAY(rx_status_fifo
, lan9118_state
, 896),
305 VMSTATE_INT32(rx_fifo_size
, lan9118_state
),
306 VMSTATE_INT32(rx_fifo_used
, lan9118_state
),
307 VMSTATE_INT32(rx_fifo_head
, lan9118_state
),
308 VMSTATE_UINT32_ARRAY(rx_fifo
, lan9118_state
, 3360),
309 VMSTATE_INT32(rx_packet_size_head
, lan9118_state
),
310 VMSTATE_INT32(rx_packet_size_tail
, lan9118_state
),
311 VMSTATE_INT32_ARRAY(rx_packet_size
, lan9118_state
, 1024),
312 VMSTATE_INT32(rxp_offset
, lan9118_state
),
313 VMSTATE_INT32(rxp_size
, lan9118_state
),
314 VMSTATE_INT32(rxp_pad
, lan9118_state
),
315 VMSTATE_UINT32_V(write_word_prev_offset
, lan9118_state
, 2),
316 VMSTATE_UINT32_V(write_word_n
, lan9118_state
, 2),
317 VMSTATE_UINT16_V(write_word_l
, lan9118_state
, 2),
318 VMSTATE_UINT16_V(write_word_h
, lan9118_state
, 2),
319 VMSTATE_UINT32_V(read_word_prev_offset
, lan9118_state
, 2),
320 VMSTATE_UINT32_V(read_word_n
, lan9118_state
, 2),
321 VMSTATE_UINT32_V(read_long
, lan9118_state
, 2),
322 VMSTATE_UINT32_V(mode_16bit
, lan9118_state
, 2),
323 VMSTATE_END_OF_LIST()
327 static void lan9118_update(lan9118_state
*s
)
331 /* TODO: Implement FIFO level IRQs. */
332 level
= (s
->int_sts
& s
->int_en
) != 0;
334 s
->irq_cfg
|= IRQ_INT
;
336 s
->irq_cfg
&= ~IRQ_INT
;
338 if ((s
->irq_cfg
& IRQ_EN
) == 0) {
341 if ((s
->irq_cfg
& (IRQ_TYPE
| IRQ_POL
)) != (IRQ_TYPE
| IRQ_POL
)) {
342 /* Interrupt is active low unless we're configured as
343 * active-high polarity, push-pull type.
347 qemu_set_irq(s
->irq
, level
);
350 static void lan9118_mac_changed(lan9118_state
*s
)
352 qemu_format_nic_info_str(qemu_get_queue(s
->nic
), s
->conf
.macaddr
.a
);
355 static void lan9118_reload_eeprom(lan9118_state
*s
)
358 if (s
->eeprom
[0] != 0xa5) {
359 s
->e2p_cmd
&= ~E2P_CMD_MAC_ADDR_LOADED
;
360 DPRINTF("MACADDR load failed\n");
363 for (i
= 0; i
< 6; i
++) {
364 s
->conf
.macaddr
.a
[i
] = s
->eeprom
[i
+ 1];
366 s
->e2p_cmd
|= E2P_CMD_MAC_ADDR_LOADED
;
367 DPRINTF("MACADDR loaded from eeprom\n");
368 lan9118_mac_changed(s
);
371 static void phy_update_irq(lan9118_state
*s
)
373 if (s
->phy_int
& s
->phy_int_mask
) {
374 s
->int_sts
|= PHY_INT
;
376 s
->int_sts
&= ~PHY_INT
;
381 static void phy_update_link(lan9118_state
*s
)
383 /* Autonegotiation status mirrors link status. */
384 if (qemu_get_queue(s
->nic
)->link_down
) {
385 s
->phy_status
&= ~0x0024;
386 s
->phy_int
|= PHY_INT_DOWN
;
388 s
->phy_status
|= 0x0024;
389 s
->phy_int
|= PHY_INT_ENERGYON
;
390 s
->phy_int
|= PHY_INT_AUTONEG_COMPLETE
;
395 static void lan9118_set_link(NetClientState
*nc
)
397 phy_update_link(qemu_get_nic_opaque(nc
));
400 static void phy_reset(lan9118_state
*s
)
402 s
->phy_status
= 0x7809;
403 s
->phy_control
= 0x3000;
404 s
->phy_advertise
= 0x01e1;
410 static void lan9118_reset(DeviceState
*d
)
412 lan9118_state
*s
= LAN9118(d
);
414 s
->irq_cfg
&= (IRQ_TYPE
| IRQ_POL
);
417 s
->fifo_int
= 0x48000000;
420 s
->hw_cfg
= s
->mode_16bit
? 0x00050000 : 0x00050004;
423 s
->txp
->fifo_used
= 0;
424 s
->txp
->state
= TX_IDLE
;
425 s
->txp
->cmd_a
= 0xffffffffu
;
426 s
->txp
->cmd_b
= 0xffffffffu
;
428 s
->txp
->fifo_used
= 0;
429 s
->tx_fifo_size
= 4608;
430 s
->tx_status_fifo_used
= 0;
431 s
->rx_status_fifo_size
= 704;
432 s
->rx_fifo_size
= 2640;
434 s
->rx_status_fifo_size
= 176;
435 s
->rx_status_fifo_used
= 0;
439 s
->rx_packet_size_tail
= s
->rx_packet_size_head
;
440 s
->rx_packet_size
[s
->rx_packet_size_head
] = 0;
446 s
->free_timer_start
= qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL
) / 40;
448 ptimer_stop(s
->timer
);
449 ptimer_set_count(s
->timer
, 0xffff);
452 s
->mac_cr
= MAC_CR_PRMS
;
464 s
->eeprom_writable
= 0;
465 lan9118_reload_eeprom(s
);
468 static void rx_fifo_push(lan9118_state
*s
, uint32_t val
)
471 fifo_pos
= s
->rx_fifo_head
+ s
->rx_fifo_used
;
472 if (fifo_pos
>= s
->rx_fifo_size
)
473 fifo_pos
-= s
->rx_fifo_size
;
474 s
->rx_fifo
[fifo_pos
] = val
;
478 /* Return nonzero if the packet is accepted by the filter. */
479 static int lan9118_filter(lan9118_state
*s
, const uint8_t *addr
)
484 if (s
->mac_cr
& MAC_CR_PRMS
) {
487 if (addr
[0] == 0xff && addr
[1] == 0xff && addr
[2] == 0xff &&
488 addr
[3] == 0xff && addr
[4] == 0xff && addr
[5] == 0xff) {
489 return (s
->mac_cr
& MAC_CR_BCAST
) == 0;
492 multicast
= addr
[0] & 1;
493 if (multicast
&&s
->mac_cr
& MAC_CR_MCPAS
) {
496 if (multicast
? (s
->mac_cr
& MAC_CR_HPFILT
) == 0
497 : (s
->mac_cr
& MAC_CR_HO
) == 0) {
498 /* Exact matching. */
499 hash
= memcmp(addr
, s
->conf
.macaddr
.a
, 6);
500 if (s
->mac_cr
& MAC_CR_INVFILT
) {
507 hash
= compute_mcast_idx(addr
);
509 return (s
->mac_hashh
>> (hash
& 0x1f)) & 1;
511 return (s
->mac_hashl
>> (hash
& 0x1f)) & 1;
516 static ssize_t
lan9118_receive(NetClientState
*nc
, const uint8_t *buf
,
519 lan9118_state
*s
= qemu_get_nic_opaque(nc
);
529 if ((s
->mac_cr
& MAC_CR_RXEN
) == 0) {
533 if (size
>= 2048 || size
< 14) {
537 /* TODO: Implement FIFO overflow notification. */
538 if (s
->rx_status_fifo_used
== s
->rx_status_fifo_size
) {
542 filter
= lan9118_filter(s
, buf
);
543 if (!filter
&& (s
->mac_cr
& MAC_CR_RXALL
) == 0) {
547 offset
= (s
->rx_cfg
>> 8) & 0x1f;
549 fifo_len
= (size
+ n
+ 3) >> 2;
550 /* Add a word for the CRC. */
552 if (s
->rx_fifo_size
- s
->rx_fifo_used
< fifo_len
) {
556 DPRINTF("Got packet len:%d fifo:%d filter:%s\n",
557 (int)size
, fifo_len
, filter
? "pass" : "fail");
559 crc
= bswap32(crc32(~0, buf
, size
));
560 for (src_pos
= 0; src_pos
< size
; src_pos
++) {
561 val
= (val
>> 8) | ((uint32_t)buf
[src_pos
] << 24);
565 rx_fifo_push(s
, val
);
570 val
>>= ((4 - n
) * 8);
571 val
|= crc
<< (n
* 8);
572 rx_fifo_push(s
, val
);
573 val
= crc
>> ((4 - n
) * 8);
574 rx_fifo_push(s
, val
);
576 rx_fifo_push(s
, crc
);
578 n
= s
->rx_status_fifo_head
+ s
->rx_status_fifo_used
;
579 if (n
>= s
->rx_status_fifo_size
) {
580 n
-= s
->rx_status_fifo_size
;
582 s
->rx_packet_size
[s
->rx_packet_size_tail
] = fifo_len
;
583 s
->rx_packet_size_tail
= (s
->rx_packet_size_tail
+ 1023) & 1023;
584 s
->rx_status_fifo_used
++;
586 status
= (size
+ 4) << 16;
587 if (buf
[0] == 0xff && buf
[1] == 0xff && buf
[2] == 0xff &&
588 buf
[3] == 0xff && buf
[4] == 0xff && buf
[5] == 0xff) {
589 status
|= 0x00002000;
590 } else if (buf
[0] & 1) {
591 status
|= 0x00000400;
594 status
|= 0x40000000;
596 s
->rx_status_fifo
[n
] = status
;
598 if (s
->rx_status_fifo_used
> (s
->fifo_int
& 0xff)) {
599 s
->int_sts
|= RSFL_INT
;
606 static uint32_t rx_fifo_pop(lan9118_state
*s
)
611 if (s
->rxp_size
== 0 && s
->rxp_pad
== 0) {
612 s
->rxp_size
= s
->rx_packet_size
[s
->rx_packet_size_head
];
613 s
->rx_packet_size
[s
->rx_packet_size_head
] = 0;
614 if (s
->rxp_size
!= 0) {
615 s
->rx_packet_size_head
= (s
->rx_packet_size_head
+ 1023) & 1023;
616 s
->rxp_offset
= (s
->rx_cfg
>> 10) & 7;
617 n
= s
->rxp_offset
+ s
->rxp_size
;
618 switch (s
->rx_cfg
>> 30) {
630 DPRINTF("Pop packet size:%d offset:%d pad: %d\n",
631 s
->rxp_size
, s
->rxp_offset
, s
->rxp_pad
);
634 if (s
->rxp_offset
> 0) {
637 } else if (s
->rxp_size
> 0) {
639 val
= s
->rx_fifo
[s
->rx_fifo_head
++];
640 if (s
->rx_fifo_head
>= s
->rx_fifo_size
) {
641 s
->rx_fifo_head
-= s
->rx_fifo_size
;
644 } else if (s
->rxp_pad
> 0) {
648 DPRINTF("RX underflow\n");
649 s
->int_sts
|= RXE_INT
;
656 static void do_tx_packet(lan9118_state
*s
)
661 /* FIXME: Honor TX disable, and allow queueing of packets. */
662 if (s
->phy_control
& 0x4000) {
663 /* This assumes the receive routine doesn't touch the VLANClient. */
664 lan9118_receive(qemu_get_queue(s
->nic
), s
->txp
->data
, s
->txp
->len
);
666 qemu_send_packet(qemu_get_queue(s
->nic
), s
->txp
->data
, s
->txp
->len
);
668 s
->txp
->fifo_used
= 0;
670 if (s
->tx_status_fifo_used
== 512) {
671 /* Status FIFO full */
674 /* Add entry to status FIFO. */
675 status
= s
->txp
->cmd_b
& 0xffff0000u
;
676 DPRINTF("Sent packet tag:%04x len %d\n", status
>> 16, s
->txp
->len
);
677 n
= (s
->tx_status_fifo_head
+ s
->tx_status_fifo_used
) & 511;
678 s
->tx_status_fifo
[n
] = status
;
679 s
->tx_status_fifo_used
++;
680 if (s
->tx_status_fifo_used
== 512) {
681 s
->int_sts
|= TSFF_INT
;
682 /* TODO: Stop transmission. */
686 static uint32_t rx_status_fifo_pop(lan9118_state
*s
)
690 val
= s
->rx_status_fifo
[s
->rx_status_fifo_head
];
691 if (s
->rx_status_fifo_used
!= 0) {
692 s
->rx_status_fifo_used
--;
693 s
->rx_status_fifo_head
++;
694 if (s
->rx_status_fifo_head
>= s
->rx_status_fifo_size
) {
695 s
->rx_status_fifo_head
-= s
->rx_status_fifo_size
;
697 /* ??? What value should be returned when the FIFO is empty? */
698 DPRINTF("RX status pop 0x%08x\n", val
);
703 static uint32_t tx_status_fifo_pop(lan9118_state
*s
)
707 val
= s
->tx_status_fifo
[s
->tx_status_fifo_head
];
708 if (s
->tx_status_fifo_used
!= 0) {
709 s
->tx_status_fifo_used
--;
710 s
->tx_status_fifo_head
= (s
->tx_status_fifo_head
+ 1) & 511;
711 /* ??? What value should be returned when the FIFO is empty? */
716 static void tx_fifo_push(lan9118_state
*s
, uint32_t val
)
720 if (s
->txp
->fifo_used
== s
->tx_fifo_size
) {
721 s
->int_sts
|= TDFO_INT
;
724 switch (s
->txp
->state
) {
726 s
->txp
->cmd_a
= val
& 0x831f37ff;
728 s
->txp
->state
= TX_B
;
729 s
->txp
->buffer_size
= extract32(s
->txp
->cmd_a
, 0, 11);
730 s
->txp
->offset
= extract32(s
->txp
->cmd_a
, 16, 5);
733 if (s
->txp
->cmd_a
& 0x2000) {
737 /* End alignment does not include command words. */
738 n
= (s
->txp
->buffer_size
+ s
->txp
->offset
+ 3) >> 2;
739 switch ((n
>> 24) & 3) {
752 DPRINTF("Block len:%d offset:%d pad:%d cmd %08x\n",
753 s
->txp
->buffer_size
, s
->txp
->offset
, s
->txp
->pad
,
755 s
->txp
->state
= TX_DATA
;
758 if (s
->txp
->offset
>= 4) {
762 if (s
->txp
->buffer_size
<= 0 && s
->txp
->pad
!= 0) {
765 n
= MIN(4, s
->txp
->buffer_size
+ s
->txp
->offset
);
766 while (s
->txp
->offset
) {
771 /* Documentation is somewhat unclear on the ordering of bytes
772 in FIFO words. Empirical results show it to be little-endian.
774 /* TODO: FIFO overflow checking. */
776 s
->txp
->data
[s
->txp
->len
] = val
& 0xff;
779 s
->txp
->buffer_size
--;
783 if (s
->txp
->buffer_size
<= 0 && s
->txp
->pad
== 0) {
784 if (s
->txp
->cmd_a
& 0x1000) {
787 if (s
->txp
->cmd_a
& 0x80000000) {
788 s
->int_sts
|= TX_IOC_INT
;
790 s
->txp
->state
= TX_IDLE
;
796 static uint32_t do_phy_read(lan9118_state
*s
, int reg
)
801 case 0: /* Basic Control */
802 return s
->phy_control
;
803 case 1: /* Basic Status */
804 return s
->phy_status
;
809 case 4: /* Auto-neg advertisement */
810 return s
->phy_advertise
;
811 case 5: /* Auto-neg Link Partner Ability */
813 case 6: /* Auto-neg Expansion */
815 /* TODO 17, 18, 27, 29, 30, 31 */
816 case 29: /* Interrupt source. */
821 case 30: /* Interrupt mask */
822 return s
->phy_int_mask
;
824 BADF("PHY read reg %d\n", reg
);
829 static void do_phy_write(lan9118_state
*s
, int reg
, uint32_t val
)
832 case 0: /* Basic Control */
837 s
->phy_control
= val
& 0x7980;
838 /* Complete autonegotiation immediately. */
840 s
->phy_status
|= 0x0020;
843 case 4: /* Auto-neg advertisement */
844 s
->phy_advertise
= (val
& 0x2d7f) | 0x80;
846 /* TODO 17, 18, 27, 31 */
847 case 30: /* Interrupt mask */
848 s
->phy_int_mask
= val
& 0xff;
852 BADF("PHY write reg %d = 0x%04x\n", reg
, val
);
856 static void do_mac_write(lan9118_state
*s
, int reg
, uint32_t val
)
860 if ((s
->mac_cr
& MAC_CR_RXEN
) != 0 && (val
& MAC_CR_RXEN
) == 0) {
861 s
->int_sts
|= RXSTOP_INT
;
863 s
->mac_cr
= val
& ~MAC_CR_RESERVED
;
864 DPRINTF("MAC_CR: %08x\n", val
);
867 s
->conf
.macaddr
.a
[4] = val
& 0xff;
868 s
->conf
.macaddr
.a
[5] = (val
>> 8) & 0xff;
869 lan9118_mac_changed(s
);
872 s
->conf
.macaddr
.a
[0] = val
& 0xff;
873 s
->conf
.macaddr
.a
[1] = (val
>> 8) & 0xff;
874 s
->conf
.macaddr
.a
[2] = (val
>> 16) & 0xff;
875 s
->conf
.macaddr
.a
[3] = (val
>> 24) & 0xff;
876 lan9118_mac_changed(s
);
885 s
->mac_mii_acc
= val
& 0xffc2;
887 DPRINTF("PHY write %d = 0x%04x\n",
888 (val
>> 6) & 0x1f, s
->mac_mii_data
);
889 do_phy_write(s
, (val
>> 6) & 0x1f, s
->mac_mii_data
);
891 s
->mac_mii_data
= do_phy_read(s
, (val
>> 6) & 0x1f);
892 DPRINTF("PHY read %d = 0x%04x\n",
893 (val
>> 6) & 0x1f, s
->mac_mii_data
);
897 s
->mac_mii_data
= val
& 0xffff;
900 s
->mac_flow
= val
& 0xffff0000;
903 /* Writing to this register changes a condition for
904 * FrameTooLong bit in rx_status. Since we do not set
905 * FrameTooLong anyway, just ignore write to this.
909 qemu_log_mask(LOG_GUEST_ERROR
,
910 "lan9118: Unimplemented MAC register write: %d = 0x%x\n",
911 s
->mac_cmd
& 0xf, val
);
915 static uint32_t do_mac_read(lan9118_state
*s
, int reg
)
921 return s
->conf
.macaddr
.a
[4] | (s
->conf
.macaddr
.a
[5] << 8);
923 return s
->conf
.macaddr
.a
[0] | (s
->conf
.macaddr
.a
[1] << 8)
924 | (s
->conf
.macaddr
.a
[2] << 16) | (s
->conf
.macaddr
.a
[3] << 24);
932 return s
->mac_mii_acc
;
934 return s
->mac_mii_data
;
938 qemu_log_mask(LOG_GUEST_ERROR
,
939 "lan9118: Unimplemented MAC register read: %d\n",
945 static void lan9118_eeprom_cmd(lan9118_state
*s
, int cmd
, int addr
)
947 s
->e2p_cmd
= (s
->e2p_cmd
& E2P_CMD_MAC_ADDR_LOADED
) | (cmd
<< 28) | addr
;
950 s
->e2p_data
= s
->eeprom
[addr
];
951 DPRINTF("EEPROM Read %d = 0x%02x\n", addr
, s
->e2p_data
);
954 s
->eeprom_writable
= 0;
955 DPRINTF("EEPROM Write Disable\n");
958 s
->eeprom_writable
= 1;
959 DPRINTF("EEPROM Write Enable\n");
962 if (s
->eeprom_writable
) {
963 s
->eeprom
[addr
] &= s
->e2p_data
;
964 DPRINTF("EEPROM Write %d = 0x%02x\n", addr
, s
->e2p_data
);
966 DPRINTF("EEPROM Write %d (ignored)\n", addr
);
970 if (s
->eeprom_writable
) {
971 for (addr
= 0; addr
< 128; addr
++) {
972 s
->eeprom
[addr
] &= s
->e2p_data
;
974 DPRINTF("EEPROM Write All 0x%02x\n", s
->e2p_data
);
976 DPRINTF("EEPROM Write All (ignored)\n");
980 if (s
->eeprom_writable
) {
981 s
->eeprom
[addr
] = 0xff;
982 DPRINTF("EEPROM Erase %d\n", addr
);
984 DPRINTF("EEPROM Erase %d (ignored)\n", addr
);
988 if (s
->eeprom_writable
) {
989 memset(s
->eeprom
, 0xff, 128);
990 DPRINTF("EEPROM Erase All\n");
992 DPRINTF("EEPROM Erase All (ignored)\n");
996 lan9118_reload_eeprom(s
);
1001 static void lan9118_tick(void *opaque
)
1003 lan9118_state
*s
= (lan9118_state
*)opaque
;
1004 if (s
->int_en
& GPT_INT
) {
1005 s
->int_sts
|= GPT_INT
;
1010 static void lan9118_writel(void *opaque
, hwaddr offset
,
1011 uint64_t val
, unsigned size
)
1013 lan9118_state
*s
= (lan9118_state
*)opaque
;
1016 //DPRINTF("Write reg 0x%02x = 0x%08x\n", (int)offset, val);
1017 if (offset
>= 0x20 && offset
< 0x40) {
1019 tx_fifo_push(s
, val
);
1024 /* TODO: Implement interrupt deassertion intervals. */
1025 val
&= (IRQ_EN
| IRQ_POL
| IRQ_TYPE
);
1026 s
->irq_cfg
= (s
->irq_cfg
& IRQ_INT
) | val
;
1032 s
->int_en
= val
& ~RESERVED_INT
;
1033 s
->int_sts
|= val
& SW_INT
;
1036 DPRINTF("FIFO INT levels %08x\n", val
);
1042 s
->rx_fifo_used
= 0;
1043 s
->rx_status_fifo_used
= 0;
1044 s
->rx_packet_size_tail
= s
->rx_packet_size_head
;
1045 s
->rx_packet_size
[s
->rx_packet_size_head
] = 0;
1047 s
->rx_cfg
= val
& 0xcfff1ff0;
1051 s
->tx_status_fifo_used
= 0;
1054 s
->txp
->state
= TX_IDLE
;
1055 s
->txp
->fifo_used
= 0;
1056 s
->txp
->cmd_a
= 0xffffffff;
1058 s
->tx_cfg
= val
& 6;
1063 lan9118_reset(DEVICE(s
));
1065 s
->hw_cfg
= (val
& 0x003f300) | (s
->hw_cfg
& 0x4);
1068 case CSR_RX_DP_CTRL
:
1069 if (val
& 0x80000000) {
1070 /* Skip forward to next packet. */
1073 if (s
->rxp_size
== 0) {
1074 /* Pop a word to start the next packet. */
1079 s
->rx_fifo_head
+= s
->rxp_size
;
1080 if (s
->rx_fifo_head
>= s
->rx_fifo_size
) {
1081 s
->rx_fifo_head
-= s
->rx_fifo_size
;
1089 s
->pmt_ctrl
&= ~0x34e;
1090 s
->pmt_ctrl
|= (val
& 0x34e);
1093 /* Probably just enabling LEDs. */
1094 s
->gpio_cfg
= val
& 0x7777071f;
1097 if ((s
->gpt_cfg
^ val
) & GPT_TIMER_EN
) {
1098 if (val
& GPT_TIMER_EN
) {
1099 ptimer_set_count(s
->timer
, val
& 0xffff);
1100 ptimer_run(s
->timer
, 0);
1102 ptimer_stop(s
->timer
);
1103 ptimer_set_count(s
->timer
, 0xffff);
1106 s
->gpt_cfg
= val
& (GPT_TIMER_EN
| 0xffff);
1109 /* Ignored because we're in 32-bit mode. */
1112 case CSR_MAC_CSR_CMD
:
1113 s
->mac_cmd
= val
& 0x4000000f;
1114 if (val
& 0x80000000) {
1115 if (val
& 0x40000000) {
1116 s
->mac_data
= do_mac_read(s
, val
& 0xf);
1117 DPRINTF("MAC read %d = 0x%08x\n", val
& 0xf, s
->mac_data
);
1119 DPRINTF("MAC write %d = 0x%08x\n", val
& 0xf, s
->mac_data
);
1120 do_mac_write(s
, val
& 0xf, s
->mac_data
);
1124 case CSR_MAC_CSR_DATA
:
1128 s
->afc_cfg
= val
& 0x00ffffff;
1131 lan9118_eeprom_cmd(s
, (val
>> 28) & 7, val
& 0x7f);
1134 s
->e2p_data
= val
& 0xff;
1138 qemu_log_mask(LOG_GUEST_ERROR
, "lan9118_write: Bad reg 0x%x = %x\n",
1139 (int)offset
, (int)val
);
1145 static void lan9118_writew(void *opaque
, hwaddr offset
,
1148 lan9118_state
*s
= (lan9118_state
*)opaque
;
1151 if (s
->write_word_prev_offset
!= (offset
& ~0x3)) {
1152 /* New offset, reset word counter */
1153 s
->write_word_n
= 0;
1154 s
->write_word_prev_offset
= offset
& ~0x3;
1158 s
->write_word_h
= val
;
1160 s
->write_word_l
= val
;
1163 //DPRINTF("Writew reg 0x%02x = 0x%08x\n", (int)offset, val);
1165 if (s
->write_word_n
== 2) {
1166 s
->write_word_n
= 0;
1167 lan9118_writel(s
, offset
& ~3, s
->write_word_l
+
1168 (s
->write_word_h
<< 16), 4);
1172 static void lan9118_16bit_mode_write(void *opaque
, hwaddr offset
,
1173 uint64_t val
, unsigned size
)
1177 lan9118_writew(opaque
, offset
, (uint32_t)val
);
1180 lan9118_writel(opaque
, offset
, val
, size
);
1184 hw_error("lan9118_write: Bad size 0x%x\n", size
);
1187 static uint64_t lan9118_readl(void *opaque
, hwaddr offset
,
1190 lan9118_state
*s
= (lan9118_state
*)opaque
;
1192 //DPRINTF("Read reg 0x%02x\n", (int)offset);
1193 if (offset
< 0x20) {
1195 return rx_fifo_pop(s
);
1199 return rx_status_fifo_pop(s
);
1201 return s
->rx_status_fifo
[s
->tx_status_fifo_head
];
1203 return tx_status_fifo_pop(s
);
1205 return s
->tx_status_fifo
[s
->tx_status_fifo_head
];
1224 case CSR_RX_DP_CTRL
:
1226 case CSR_RX_FIFO_INF
:
1227 return (s
->rx_status_fifo_used
<< 16) | (s
->rx_fifo_used
<< 2);
1228 case CSR_TX_FIFO_INF
:
1229 return (s
->tx_status_fifo_used
<< 16)
1230 | (s
->tx_fifo_size
- s
->txp
->fifo_used
);
1238 return ptimer_get_count(s
->timer
);
1240 return s
->word_swap
;
1242 return (qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL
) / 40) - s
->free_timer_start
;
1244 /* TODO: Implement dropped frames counter. */
1246 case CSR_MAC_CSR_CMD
:
1248 case CSR_MAC_CSR_DATA
:
1257 qemu_log_mask(LOG_GUEST_ERROR
, "lan9118_read: Bad reg 0x%x\n", (int)offset
);
1261 static uint32_t lan9118_readw(void *opaque
, hwaddr offset
)
1263 lan9118_state
*s
= (lan9118_state
*)opaque
;
1266 if (s
->read_word_prev_offset
!= (offset
& ~0x3)) {
1267 /* New offset, reset word counter */
1269 s
->read_word_prev_offset
= offset
& ~0x3;
1273 if (s
->read_word_n
== 1) {
1274 s
->read_long
= lan9118_readl(s
, offset
& ~3, 4);
1280 val
= s
->read_long
>> 16;
1282 val
= s
->read_long
& 0xFFFF;
1285 //DPRINTF("Readw reg 0x%02x, val 0x%x\n", (int)offset, val);
1289 static uint64_t lan9118_16bit_mode_read(void *opaque
, hwaddr offset
,
1294 return lan9118_readw(opaque
, offset
);
1296 return lan9118_readl(opaque
, offset
, size
);
1299 hw_error("lan9118_read: Bad size 0x%x\n", size
);
1303 static const MemoryRegionOps lan9118_mem_ops
= {
1304 .read
= lan9118_readl
,
1305 .write
= lan9118_writel
,
1306 .endianness
= DEVICE_NATIVE_ENDIAN
,
1309 static const MemoryRegionOps lan9118_16bit_mem_ops
= {
1310 .read
= lan9118_16bit_mode_read
,
1311 .write
= lan9118_16bit_mode_write
,
1312 .endianness
= DEVICE_NATIVE_ENDIAN
,
1315 static NetClientInfo net_lan9118_info
= {
1316 .type
= NET_CLIENT_DRIVER_NIC
,
1317 .size
= sizeof(NICState
),
1318 .receive
= lan9118_receive
,
1319 .link_status_changed
= lan9118_set_link
,
1322 static int lan9118_init1(SysBusDevice
*sbd
)
1324 DeviceState
*dev
= DEVICE(sbd
);
1325 lan9118_state
*s
= LAN9118(dev
);
1328 const MemoryRegionOps
*mem_ops
=
1329 s
->mode_16bit
? &lan9118_16bit_mem_ops
: &lan9118_mem_ops
;
1331 memory_region_init_io(&s
->mmio
, OBJECT(dev
), mem_ops
, s
,
1332 "lan9118-mmio", 0x100);
1333 sysbus_init_mmio(sbd
, &s
->mmio
);
1334 sysbus_init_irq(sbd
, &s
->irq
);
1335 qemu_macaddr_default_if_unset(&s
->conf
.macaddr
);
1337 s
->nic
= qemu_new_nic(&net_lan9118_info
, &s
->conf
,
1338 object_get_typename(OBJECT(dev
)), dev
->id
, s
);
1339 qemu_format_nic_info_str(qemu_get_queue(s
->nic
), s
->conf
.macaddr
.a
);
1340 s
->eeprom
[0] = 0xa5;
1341 for (i
= 0; i
< 6; i
++) {
1342 s
->eeprom
[i
+ 1] = s
->conf
.macaddr
.a
[i
];
1345 s
->txp
= &s
->tx_packet
;
1347 bh
= qemu_bh_new(lan9118_tick
, s
);
1348 s
->timer
= ptimer_init(bh
, PTIMER_POLICY_DEFAULT
);
1349 ptimer_set_freq(s
->timer
, 10000);
1350 ptimer_set_limit(s
->timer
, 0xffff, 1);
1355 static Property lan9118_properties
[] = {
1356 DEFINE_NIC_PROPERTIES(lan9118_state
, conf
),
1357 DEFINE_PROP_UINT32("mode_16bit", lan9118_state
, mode_16bit
, 0),
1358 DEFINE_PROP_END_OF_LIST(),
1361 static void lan9118_class_init(ObjectClass
*klass
, void *data
)
1363 DeviceClass
*dc
= DEVICE_CLASS(klass
);
1364 SysBusDeviceClass
*k
= SYS_BUS_DEVICE_CLASS(klass
);
1366 k
->init
= lan9118_init1
;
1367 dc
->reset
= lan9118_reset
;
1368 dc
->props
= lan9118_properties
;
1369 dc
->vmsd
= &vmstate_lan9118
;
1372 static const TypeInfo lan9118_info
= {
1373 .name
= TYPE_LAN9118
,
1374 .parent
= TYPE_SYS_BUS_DEVICE
,
1375 .instance_size
= sizeof(lan9118_state
),
1376 .class_init
= lan9118_class_init
,
1379 static void lan9118_register_types(void)
1381 type_register_static(&lan9118_info
);
1384 /* Legacy helper function. Should go away when machine config files are
1386 void lan9118_init(NICInfo
*nd
, uint32_t base
, qemu_irq irq
)
1391 qemu_check_nic_model(nd
, "lan9118");
1392 dev
= qdev_create(NULL
, TYPE_LAN9118
);
1393 qdev_set_nic_properties(dev
, nd
);
1394 qdev_init_nofail(dev
);
1395 s
= SYS_BUS_DEVICE(dev
);
1396 sysbus_mmio_map(s
, 0, base
);
1397 sysbus_connect_irq(s
, 0, irq
);
1400 type_init(lan9118_register_types
)