Move isa_connect_irq calls into isa_create_simple
[qemu.git] / hw / pc.c
blob9dad10491c8743828153c2b9fd1614269a104194
1 /*
2 * QEMU PC System Emulator
4 * Copyright (c) 2003-2004 Fabrice Bellard
6 * Permission is hereby granted, free of charge, to any person obtaining a copy
7 * of this software and associated documentation files (the "Software"), to deal
8 * in the Software without restriction, including without limitation the rights
9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10 * copies of the Software, and to permit persons to whom the Software is
11 * furnished to do so, subject to the following conditions:
13 * The above copyright notice and this permission notice shall be included in
14 * all copies or substantial portions of the Software.
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
22 * THE SOFTWARE.
24 #include "hw.h"
25 #include "pc.h"
26 #include "fdc.h"
27 #include "pci.h"
28 #include "block.h"
29 #include "sysemu.h"
30 #include "audio/audio.h"
31 #include "net.h"
32 #include "smbus.h"
33 #include "boards.h"
34 #include "monitor.h"
35 #include "fw_cfg.h"
36 #include "hpet_emul.h"
37 #include "watchdog.h"
38 #include "smbios.h"
40 /* output Bochs bios info messages */
41 //#define DEBUG_BIOS
43 /* Show multiboot debug output */
44 //#define DEBUG_MULTIBOOT
46 #define BIOS_FILENAME "bios.bin"
47 #define VGABIOS_FILENAME "vgabios.bin"
48 #define VGABIOS_CIRRUS_FILENAME "vgabios-cirrus.bin"
50 #define PC_MAX_BIOS_SIZE (4 * 1024 * 1024)
52 /* Leave a chunk of memory at the top of RAM for the BIOS ACPI tables. */
53 #define ACPI_DATA_SIZE 0x10000
54 #define BIOS_CFG_IOPORT 0x510
55 #define FW_CFG_ACPI_TABLES (FW_CFG_ARCH_LOCAL + 0)
56 #define FW_CFG_SMBIOS_ENTRIES (FW_CFG_ARCH_LOCAL + 1)
57 #define FW_CFG_IRQ0_OVERRIDE (FW_CFG_ARCH_LOCAL + 2)
59 #define MAX_IDE_BUS 2
61 static fdctrl_t *floppy_controller;
62 static RTCState *rtc_state;
63 static PITState *pit;
64 static PCIDevice *i440fx_state;
66 typedef struct rom_reset_data {
67 uint8_t *data;
68 target_phys_addr_t addr;
69 unsigned size;
70 } RomResetData;
72 static void option_rom_reset(void *_rrd)
74 RomResetData *rrd = _rrd;
76 cpu_physical_memory_write_rom(rrd->addr, rrd->data, rrd->size);
79 static void option_rom_setup_reset(target_phys_addr_t addr, unsigned size)
81 RomResetData *rrd = qemu_malloc(sizeof *rrd);
83 rrd->data = qemu_malloc(size);
84 cpu_physical_memory_read(addr, rrd->data, size);
85 rrd->addr = addr;
86 rrd->size = size;
87 qemu_register_reset(option_rom_reset, rrd);
90 typedef struct isa_irq_state {
91 qemu_irq *i8259;
92 qemu_irq *ioapic;
93 } IsaIrqState;
95 static void isa_irq_handler(void *opaque, int n, int level)
97 IsaIrqState *isa = (IsaIrqState *)opaque;
99 if (n < 16) {
100 qemu_set_irq(isa->i8259[n], level);
102 qemu_set_irq(isa->ioapic[n], level);
105 static void ioport80_write(void *opaque, uint32_t addr, uint32_t data)
109 /* MSDOS compatibility mode FPU exception support */
110 static qemu_irq ferr_irq;
111 /* XXX: add IGNNE support */
112 void cpu_set_ferr(CPUX86State *s)
114 qemu_irq_raise(ferr_irq);
117 static void ioportF0_write(void *opaque, uint32_t addr, uint32_t data)
119 qemu_irq_lower(ferr_irq);
122 /* TSC handling */
123 uint64_t cpu_get_tsc(CPUX86State *env)
125 return cpu_get_ticks();
128 /* SMM support */
129 void cpu_smm_update(CPUState *env)
131 if (i440fx_state && env == first_cpu)
132 i440fx_set_smm(i440fx_state, (env->hflags >> HF_SMM_SHIFT) & 1);
136 /* IRQ handling */
137 int cpu_get_pic_interrupt(CPUState *env)
139 int intno;
141 intno = apic_get_interrupt(env);
142 if (intno >= 0) {
143 /* set irq request if a PIC irq is still pending */
144 /* XXX: improve that */
145 pic_update_irq(isa_pic);
146 return intno;
148 /* read the irq from the PIC */
149 if (!apic_accept_pic_intr(env))
150 return -1;
152 intno = pic_read_irq(isa_pic);
153 return intno;
156 static void pic_irq_request(void *opaque, int irq, int level)
158 CPUState *env = first_cpu;
160 if (env->apic_state) {
161 while (env) {
162 if (apic_accept_pic_intr(env))
163 apic_deliver_pic_intr(env, level);
164 env = env->next_cpu;
166 } else {
167 if (level)
168 cpu_interrupt(env, CPU_INTERRUPT_HARD);
169 else
170 cpu_reset_interrupt(env, CPU_INTERRUPT_HARD);
174 /* PC cmos mappings */
176 #define REG_EQUIPMENT_BYTE 0x14
178 static int cmos_get_fd_drive_type(int fd0)
180 int val;
182 switch (fd0) {
183 case 0:
184 /* 1.44 Mb 3"5 drive */
185 val = 4;
186 break;
187 case 1:
188 /* 2.88 Mb 3"5 drive */
189 val = 5;
190 break;
191 case 2:
192 /* 1.2 Mb 5"5 drive */
193 val = 2;
194 break;
195 default:
196 val = 0;
197 break;
199 return val;
202 static void cmos_init_hd(int type_ofs, int info_ofs, BlockDriverState *hd)
204 RTCState *s = rtc_state;
205 int cylinders, heads, sectors;
206 bdrv_get_geometry_hint(hd, &cylinders, &heads, &sectors);
207 rtc_set_memory(s, type_ofs, 47);
208 rtc_set_memory(s, info_ofs, cylinders);
209 rtc_set_memory(s, info_ofs + 1, cylinders >> 8);
210 rtc_set_memory(s, info_ofs + 2, heads);
211 rtc_set_memory(s, info_ofs + 3, 0xff);
212 rtc_set_memory(s, info_ofs + 4, 0xff);
213 rtc_set_memory(s, info_ofs + 5, 0xc0 | ((heads > 8) << 3));
214 rtc_set_memory(s, info_ofs + 6, cylinders);
215 rtc_set_memory(s, info_ofs + 7, cylinders >> 8);
216 rtc_set_memory(s, info_ofs + 8, sectors);
219 /* convert boot_device letter to something recognizable by the bios */
220 static int boot_device2nibble(char boot_device)
222 switch(boot_device) {
223 case 'a':
224 case 'b':
225 return 0x01; /* floppy boot */
226 case 'c':
227 return 0x02; /* hard drive boot */
228 case 'd':
229 return 0x03; /* CD-ROM boot */
230 case 'n':
231 return 0x04; /* Network boot */
233 return 0;
236 /* copy/pasted from cmos_init, should be made a general function
237 and used there as well */
238 static int pc_boot_set(void *opaque, const char *boot_device)
240 Monitor *mon = cur_mon;
241 #define PC_MAX_BOOT_DEVICES 3
242 RTCState *s = (RTCState *)opaque;
243 int nbds, bds[3] = { 0, };
244 int i;
246 nbds = strlen(boot_device);
247 if (nbds > PC_MAX_BOOT_DEVICES) {
248 monitor_printf(mon, "Too many boot devices for PC\n");
249 return(1);
251 for (i = 0; i < nbds; i++) {
252 bds[i] = boot_device2nibble(boot_device[i]);
253 if (bds[i] == 0) {
254 monitor_printf(mon, "Invalid boot device for PC: '%c'\n",
255 boot_device[i]);
256 return(1);
259 rtc_set_memory(s, 0x3d, (bds[1] << 4) | bds[0]);
260 rtc_set_memory(s, 0x38, (bds[2] << 4));
261 return(0);
264 /* hd_table must contain 4 block drivers */
265 static void cmos_init(ram_addr_t ram_size, ram_addr_t above_4g_mem_size,
266 const char *boot_device, BlockDriverState **hd_table)
268 RTCState *s = rtc_state;
269 int nbds, bds[3] = { 0, };
270 int val;
271 int fd0, fd1, nb;
272 int i;
274 /* various important CMOS locations needed by PC/Bochs bios */
276 /* memory size */
277 val = 640; /* base memory in K */
278 rtc_set_memory(s, 0x15, val);
279 rtc_set_memory(s, 0x16, val >> 8);
281 val = (ram_size / 1024) - 1024;
282 if (val > 65535)
283 val = 65535;
284 rtc_set_memory(s, 0x17, val);
285 rtc_set_memory(s, 0x18, val >> 8);
286 rtc_set_memory(s, 0x30, val);
287 rtc_set_memory(s, 0x31, val >> 8);
289 if (above_4g_mem_size) {
290 rtc_set_memory(s, 0x5b, (unsigned int)above_4g_mem_size >> 16);
291 rtc_set_memory(s, 0x5c, (unsigned int)above_4g_mem_size >> 24);
292 rtc_set_memory(s, 0x5d, (uint64_t)above_4g_mem_size >> 32);
295 if (ram_size > (16 * 1024 * 1024))
296 val = (ram_size / 65536) - ((16 * 1024 * 1024) / 65536);
297 else
298 val = 0;
299 if (val > 65535)
300 val = 65535;
301 rtc_set_memory(s, 0x34, val);
302 rtc_set_memory(s, 0x35, val >> 8);
304 /* set the number of CPU */
305 rtc_set_memory(s, 0x5f, smp_cpus - 1);
307 /* set boot devices, and disable floppy signature check if requested */
308 #define PC_MAX_BOOT_DEVICES 3
309 nbds = strlen(boot_device);
310 if (nbds > PC_MAX_BOOT_DEVICES) {
311 fprintf(stderr, "Too many boot devices for PC\n");
312 exit(1);
314 for (i = 0; i < nbds; i++) {
315 bds[i] = boot_device2nibble(boot_device[i]);
316 if (bds[i] == 0) {
317 fprintf(stderr, "Invalid boot device for PC: '%c'\n",
318 boot_device[i]);
319 exit(1);
322 rtc_set_memory(s, 0x3d, (bds[1] << 4) | bds[0]);
323 rtc_set_memory(s, 0x38, (bds[2] << 4) | (fd_bootchk ? 0x0 : 0x1));
325 /* floppy type */
327 fd0 = fdctrl_get_drive_type(floppy_controller, 0);
328 fd1 = fdctrl_get_drive_type(floppy_controller, 1);
330 val = (cmos_get_fd_drive_type(fd0) << 4) | cmos_get_fd_drive_type(fd1);
331 rtc_set_memory(s, 0x10, val);
333 val = 0;
334 nb = 0;
335 if (fd0 < 3)
336 nb++;
337 if (fd1 < 3)
338 nb++;
339 switch (nb) {
340 case 0:
341 break;
342 case 1:
343 val |= 0x01; /* 1 drive, ready for boot */
344 break;
345 case 2:
346 val |= 0x41; /* 2 drives, ready for boot */
347 break;
349 val |= 0x02; /* FPU is there */
350 val |= 0x04; /* PS/2 mouse installed */
351 rtc_set_memory(s, REG_EQUIPMENT_BYTE, val);
353 /* hard drives */
355 rtc_set_memory(s, 0x12, (hd_table[0] ? 0xf0 : 0) | (hd_table[1] ? 0x0f : 0));
356 if (hd_table[0])
357 cmos_init_hd(0x19, 0x1b, hd_table[0]);
358 if (hd_table[1])
359 cmos_init_hd(0x1a, 0x24, hd_table[1]);
361 val = 0;
362 for (i = 0; i < 4; i++) {
363 if (hd_table[i]) {
364 int cylinders, heads, sectors, translation;
365 /* NOTE: bdrv_get_geometry_hint() returns the physical
366 geometry. It is always such that: 1 <= sects <= 63, 1
367 <= heads <= 16, 1 <= cylinders <= 16383. The BIOS
368 geometry can be different if a translation is done. */
369 translation = bdrv_get_translation_hint(hd_table[i]);
370 if (translation == BIOS_ATA_TRANSLATION_AUTO) {
371 bdrv_get_geometry_hint(hd_table[i], &cylinders, &heads, &sectors);
372 if (cylinders <= 1024 && heads <= 16 && sectors <= 63) {
373 /* No translation. */
374 translation = 0;
375 } else {
376 /* LBA translation. */
377 translation = 1;
379 } else {
380 translation--;
382 val |= translation << (i * 2);
385 rtc_set_memory(s, 0x39, val);
388 void ioport_set_a20(int enable)
390 /* XXX: send to all CPUs ? */
391 cpu_x86_set_a20(first_cpu, enable);
394 int ioport_get_a20(void)
396 return ((first_cpu->a20_mask >> 20) & 1);
399 static void ioport92_write(void *opaque, uint32_t addr, uint32_t val)
401 ioport_set_a20((val >> 1) & 1);
402 /* XXX: bit 0 is fast reset */
405 static uint32_t ioport92_read(void *opaque, uint32_t addr)
407 return ioport_get_a20() << 1;
410 /***********************************************************/
411 /* Bochs BIOS debug ports */
413 static void bochs_bios_write(void *opaque, uint32_t addr, uint32_t val)
415 static const char shutdown_str[8] = "Shutdown";
416 static int shutdown_index = 0;
418 switch(addr) {
419 /* Bochs BIOS messages */
420 case 0x400:
421 case 0x401:
422 fprintf(stderr, "BIOS panic at rombios.c, line %d\n", val);
423 exit(1);
424 case 0x402:
425 case 0x403:
426 #ifdef DEBUG_BIOS
427 fprintf(stderr, "%c", val);
428 #endif
429 break;
430 case 0x8900:
431 /* same as Bochs power off */
432 if (val == shutdown_str[shutdown_index]) {
433 shutdown_index++;
434 if (shutdown_index == 8) {
435 shutdown_index = 0;
436 qemu_system_shutdown_request();
438 } else {
439 shutdown_index = 0;
441 break;
443 /* LGPL'ed VGA BIOS messages */
444 case 0x501:
445 case 0x502:
446 fprintf(stderr, "VGA BIOS panic, line %d\n", val);
447 exit(1);
448 case 0x500:
449 case 0x503:
450 #ifdef DEBUG_BIOS
451 fprintf(stderr, "%c", val);
452 #endif
453 break;
457 extern uint64_t node_cpumask[MAX_NODES];
459 static void *bochs_bios_init(void)
461 void *fw_cfg;
462 uint8_t *smbios_table;
463 size_t smbios_len;
464 uint64_t *numa_fw_cfg;
465 int i, j;
467 register_ioport_write(0x400, 1, 2, bochs_bios_write, NULL);
468 register_ioport_write(0x401, 1, 2, bochs_bios_write, NULL);
469 register_ioport_write(0x402, 1, 1, bochs_bios_write, NULL);
470 register_ioport_write(0x403, 1, 1, bochs_bios_write, NULL);
471 register_ioport_write(0x8900, 1, 1, bochs_bios_write, NULL);
473 register_ioport_write(0x501, 1, 2, bochs_bios_write, NULL);
474 register_ioport_write(0x502, 1, 2, bochs_bios_write, NULL);
475 register_ioport_write(0x500, 1, 1, bochs_bios_write, NULL);
476 register_ioport_write(0x503, 1, 1, bochs_bios_write, NULL);
478 fw_cfg = fw_cfg_init(BIOS_CFG_IOPORT, BIOS_CFG_IOPORT + 1, 0, 0);
480 fw_cfg_add_i32(fw_cfg, FW_CFG_ID, 1);
481 fw_cfg_add_i64(fw_cfg, FW_CFG_RAM_SIZE, (uint64_t)ram_size);
482 fw_cfg_add_bytes(fw_cfg, FW_CFG_ACPI_TABLES, (uint8_t *)acpi_tables,
483 acpi_tables_len);
484 fw_cfg_add_bytes(fw_cfg, FW_CFG_IRQ0_OVERRIDE, &irq0override, 1);
486 smbios_table = smbios_get_table(&smbios_len);
487 if (smbios_table)
488 fw_cfg_add_bytes(fw_cfg, FW_CFG_SMBIOS_ENTRIES,
489 smbios_table, smbios_len);
491 /* allocate memory for the NUMA channel: one (64bit) word for the number
492 * of nodes, one word for each VCPU->node and one word for each node to
493 * hold the amount of memory.
495 numa_fw_cfg = qemu_mallocz((1 + smp_cpus + nb_numa_nodes) * 8);
496 numa_fw_cfg[0] = cpu_to_le64(nb_numa_nodes);
497 for (i = 0; i < smp_cpus; i++) {
498 for (j = 0; j < nb_numa_nodes; j++) {
499 if (node_cpumask[j] & (1 << i)) {
500 numa_fw_cfg[i + 1] = cpu_to_le64(j);
501 break;
505 for (i = 0; i < nb_numa_nodes; i++) {
506 numa_fw_cfg[smp_cpus + 1 + i] = cpu_to_le64(node_mem[i]);
508 fw_cfg_add_bytes(fw_cfg, FW_CFG_NUMA, (uint8_t *)numa_fw_cfg,
509 (1 + smp_cpus + nb_numa_nodes) * 8);
511 return fw_cfg;
514 /* Generate an initial boot sector which sets state and jump to
515 a specified vector */
516 static void generate_bootsect(target_phys_addr_t option_rom,
517 uint32_t gpr[8], uint16_t segs[6], uint16_t ip)
519 uint8_t rom[512], *p, *reloc;
520 uint8_t sum;
521 int i;
523 memset(rom, 0, sizeof(rom));
525 p = rom;
526 /* Make sure we have an option rom signature */
527 *p++ = 0x55;
528 *p++ = 0xaa;
530 /* ROM size in sectors*/
531 *p++ = 1;
533 /* Hook int19 */
535 *p++ = 0x50; /* push ax */
536 *p++ = 0x1e; /* push ds */
537 *p++ = 0x31; *p++ = 0xc0; /* xor ax, ax */
538 *p++ = 0x8e; *p++ = 0xd8; /* mov ax, ds */
540 *p++ = 0xc7; *p++ = 0x06; /* movvw _start,0x64 */
541 *p++ = 0x64; *p++ = 0x00;
542 reloc = p;
543 *p++ = 0x00; *p++ = 0x00;
545 *p++ = 0x8c; *p++ = 0x0e; /* mov cs,0x66 */
546 *p++ = 0x66; *p++ = 0x00;
548 *p++ = 0x1f; /* pop ds */
549 *p++ = 0x58; /* pop ax */
550 *p++ = 0xcb; /* lret */
552 /* Actual code */
553 *reloc = (p - rom);
555 *p++ = 0xfa; /* CLI */
556 *p++ = 0xfc; /* CLD */
558 for (i = 0; i < 6; i++) {
559 if (i == 1) /* Skip CS */
560 continue;
562 *p++ = 0xb8; /* MOV AX,imm16 */
563 *p++ = segs[i];
564 *p++ = segs[i] >> 8;
565 *p++ = 0x8e; /* MOV <seg>,AX */
566 *p++ = 0xc0 + (i << 3);
569 for (i = 0; i < 8; i++) {
570 *p++ = 0x66; /* 32-bit operand size */
571 *p++ = 0xb8 + i; /* MOV <reg>,imm32 */
572 *p++ = gpr[i];
573 *p++ = gpr[i] >> 8;
574 *p++ = gpr[i] >> 16;
575 *p++ = gpr[i] >> 24;
578 *p++ = 0xea; /* JMP FAR */
579 *p++ = ip; /* IP */
580 *p++ = ip >> 8;
581 *p++ = segs[1]; /* CS */
582 *p++ = segs[1] >> 8;
584 /* sign rom */
585 sum = 0;
586 for (i = 0; i < (sizeof(rom) - 1); i++)
587 sum += rom[i];
588 rom[sizeof(rom) - 1] = -sum;
590 cpu_physical_memory_write_rom(option_rom, rom, sizeof(rom));
591 option_rom_setup_reset(option_rom, sizeof (rom));
594 static long get_file_size(FILE *f)
596 long where, size;
598 /* XXX: on Unix systems, using fstat() probably makes more sense */
600 where = ftell(f);
601 fseek(f, 0, SEEK_END);
602 size = ftell(f);
603 fseek(f, where, SEEK_SET);
605 return size;
608 #define MULTIBOOT_STRUCT_ADDR 0x9000
610 #if MULTIBOOT_STRUCT_ADDR > 0xf0000
611 #error multiboot struct needs to fit in 16 bit real mode
612 #endif
614 static int load_multiboot(void *fw_cfg,
615 FILE *f,
616 const char *kernel_filename,
617 const char *initrd_filename,
618 const char *kernel_cmdline,
619 uint8_t *header)
621 int i, t, is_multiboot = 0;
622 uint32_t flags = 0;
623 uint32_t mh_entry_addr;
624 uint32_t mh_load_addr;
625 uint32_t mb_kernel_size;
626 uint32_t mmap_addr = MULTIBOOT_STRUCT_ADDR;
627 uint32_t mb_bootinfo = MULTIBOOT_STRUCT_ADDR + 0x500;
628 uint32_t mb_cmdline = mb_bootinfo + 0x200;
629 uint32_t mb_mod_end;
631 /* Ok, let's see if it is a multiboot image.
632 The header is 12x32bit long, so the latest entry may be 8192 - 48. */
633 for (i = 0; i < (8192 - 48); i += 4) {
634 if (ldl_p(header+i) == 0x1BADB002) {
635 uint32_t checksum = ldl_p(header+i+8);
636 flags = ldl_p(header+i+4);
637 checksum += flags;
638 checksum += (uint32_t)0x1BADB002;
639 if (!checksum) {
640 is_multiboot = 1;
641 break;
646 if (!is_multiboot)
647 return 0; /* no multiboot */
649 #ifdef DEBUG_MULTIBOOT
650 fprintf(stderr, "qemu: I believe we found a multiboot image!\n");
651 #endif
653 if (flags & 0x00000004) { /* MULTIBOOT_HEADER_HAS_VBE */
654 fprintf(stderr, "qemu: multiboot knows VBE. we don't.\n");
656 if (!(flags & 0x00010000)) { /* MULTIBOOT_HEADER_HAS_ADDR */
657 uint64_t elf_entry;
658 int kernel_size;
659 fclose(f);
660 kernel_size = load_elf(kernel_filename, 0, &elf_entry, NULL, NULL);
661 if (kernel_size < 0) {
662 fprintf(stderr, "Error while loading elf kernel\n");
663 exit(1);
665 mh_load_addr = mh_entry_addr = elf_entry;
666 mb_kernel_size = kernel_size;
668 #ifdef DEBUG_MULTIBOOT
669 fprintf(stderr, "qemu: loading multiboot-elf kernel (%#x bytes) with entry %#zx\n",
670 mb_kernel_size, (size_t)mh_entry_addr);
671 #endif
672 } else {
673 /* Valid if mh_flags sets MULTIBOOT_HEADER_HAS_ADDR. */
674 uint32_t mh_header_addr = ldl_p(header+i+12);
675 mh_load_addr = ldl_p(header+i+16);
676 #ifdef DEBUG_MULTIBOOT
677 uint32_t mh_load_end_addr = ldl_p(header+i+20);
678 uint32_t mh_bss_end_addr = ldl_p(header+i+24);
679 #endif
680 uint32_t mb_kernel_text_offset = i - (mh_header_addr - mh_load_addr);
682 mh_entry_addr = ldl_p(header+i+28);
683 mb_kernel_size = get_file_size(f) - mb_kernel_text_offset;
685 /* Valid if mh_flags sets MULTIBOOT_HEADER_HAS_VBE.
686 uint32_t mh_mode_type = ldl_p(header+i+32);
687 uint32_t mh_width = ldl_p(header+i+36);
688 uint32_t mh_height = ldl_p(header+i+40);
689 uint32_t mh_depth = ldl_p(header+i+44); */
691 #ifdef DEBUG_MULTIBOOT
692 fprintf(stderr, "multiboot: mh_header_addr = %#x\n", mh_header_addr);
693 fprintf(stderr, "multiboot: mh_load_addr = %#x\n", mh_load_addr);
694 fprintf(stderr, "multiboot: mh_load_end_addr = %#x\n", mh_load_end_addr);
695 fprintf(stderr, "multiboot: mh_bss_end_addr = %#x\n", mh_bss_end_addr);
696 #endif
698 fseek(f, mb_kernel_text_offset, SEEK_SET);
700 #ifdef DEBUG_MULTIBOOT
701 fprintf(stderr, "qemu: loading multiboot kernel (%#x bytes) at %#x\n",
702 mb_kernel_size, mh_load_addr);
703 #endif
705 if (!fread_targphys_ok(mh_load_addr, mb_kernel_size, f)) {
706 fprintf(stderr, "qemu: read error on multiboot kernel '%s' (%#x)\n",
707 kernel_filename, mb_kernel_size);
708 exit(1);
710 fclose(f);
713 /* blob size is only the kernel for now */
714 mb_mod_end = mh_load_addr + mb_kernel_size;
716 /* load modules */
717 stl_phys(mb_bootinfo + 20, 0x0); /* mods_count */
718 if (initrd_filename) {
719 uint32_t mb_mod_info = mb_bootinfo + 0x100;
720 uint32_t mb_mod_cmdline = mb_bootinfo + 0x300;
721 uint32_t mb_mod_start = mh_load_addr;
722 uint32_t mb_mod_length = mb_kernel_size;
723 char *next_initrd;
724 char *next_space;
725 int mb_mod_count = 0;
727 do {
728 next_initrd = strchr(initrd_filename, ',');
729 if (next_initrd)
730 *next_initrd = '\0';
731 /* if a space comes after the module filename, treat everything
732 after that as parameters */
733 cpu_physical_memory_write(mb_mod_cmdline, (uint8_t*)initrd_filename,
734 strlen(initrd_filename) + 1);
735 stl_phys(mb_mod_info + 8, mb_mod_cmdline); /* string */
736 mb_mod_cmdline += strlen(initrd_filename) + 1;
737 if ((next_space = strchr(initrd_filename, ' ')))
738 *next_space = '\0';
739 #ifdef DEBUG_MULTIBOOT
740 printf("multiboot loading module: %s\n", initrd_filename);
741 #endif
742 f = fopen(initrd_filename, "rb");
743 if (f) {
744 mb_mod_start = (mb_mod_start + mb_mod_length + (TARGET_PAGE_SIZE - 1))
745 & (TARGET_PAGE_MASK);
746 mb_mod_length = get_file_size(f);
747 mb_mod_end = mb_mod_start + mb_mod_length;
749 if (!fread_targphys_ok(mb_mod_start, mb_mod_length, f)) {
750 fprintf(stderr, "qemu: read error on multiboot module '%s' (%#x)\n",
751 initrd_filename, mb_mod_length);
752 exit(1);
755 mb_mod_count++;
756 stl_phys(mb_mod_info + 0, mb_mod_start);
757 stl_phys(mb_mod_info + 4, mb_mod_start + mb_mod_length);
758 #ifdef DEBUG_MULTIBOOT
759 printf("mod_start: %#x\nmod_end: %#x\n", mb_mod_start,
760 mb_mod_start + mb_mod_length);
761 #endif
762 stl_phys(mb_mod_info + 12, 0x0); /* reserved */
764 initrd_filename = next_initrd+1;
765 mb_mod_info += 16;
766 } while (next_initrd);
767 stl_phys(mb_bootinfo + 20, mb_mod_count); /* mods_count */
768 stl_phys(mb_bootinfo + 24, mb_bootinfo + 0x100); /* mods_addr */
771 /* Make sure we're getting kernel + modules back after reset */
772 option_rom_setup_reset(mh_load_addr, mb_mod_end - mh_load_addr);
774 /* Commandline support */
775 stl_phys(mb_bootinfo + 16, mb_cmdline);
776 t = strlen(kernel_filename);
777 cpu_physical_memory_write(mb_cmdline, (uint8_t*)kernel_filename, t);
778 mb_cmdline += t;
779 stb_phys(mb_cmdline++, ' ');
780 t = strlen(kernel_cmdline) + 1;
781 cpu_physical_memory_write(mb_cmdline, (uint8_t*)kernel_cmdline, t);
783 /* the kernel is where we want it to be now */
785 #define MULTIBOOT_FLAGS_MEMORY (1 << 0)
786 #define MULTIBOOT_FLAGS_BOOT_DEVICE (1 << 1)
787 #define MULTIBOOT_FLAGS_CMDLINE (1 << 2)
788 #define MULTIBOOT_FLAGS_MODULES (1 << 3)
789 #define MULTIBOOT_FLAGS_MMAP (1 << 6)
790 stl_phys(mb_bootinfo, MULTIBOOT_FLAGS_MEMORY
791 | MULTIBOOT_FLAGS_BOOT_DEVICE
792 | MULTIBOOT_FLAGS_CMDLINE
793 | MULTIBOOT_FLAGS_MODULES
794 | MULTIBOOT_FLAGS_MMAP);
795 stl_phys(mb_bootinfo + 4, 640); /* mem_lower */
796 stl_phys(mb_bootinfo + 8, ram_size / 1024); /* mem_upper */
797 stl_phys(mb_bootinfo + 12, 0x8001ffff); /* XXX: use the -boot switch? */
798 stl_phys(mb_bootinfo + 48, mmap_addr); /* mmap_addr */
800 #ifdef DEBUG_MULTIBOOT
801 fprintf(stderr, "multiboot: mh_entry_addr = %#x\n", mh_entry_addr);
802 #endif
804 /* Pass variables to option rom */
805 fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_ADDR, mh_entry_addr);
806 fw_cfg_add_i32(fw_cfg, FW_CFG_INITRD_ADDR, mb_bootinfo);
807 fw_cfg_add_i32(fw_cfg, FW_CFG_INITRD_SIZE, mmap_addr);
809 /* Make sure we're getting the config space back after reset */
810 option_rom_setup_reset(mb_bootinfo, 0x500);
812 option_rom[nb_option_roms] = "multiboot.bin";
813 nb_option_roms++;
815 return 1; /* yes, we are multiboot */
818 static void load_linux(void *fw_cfg,
819 target_phys_addr_t option_rom,
820 const char *kernel_filename,
821 const char *initrd_filename,
822 const char *kernel_cmdline,
823 target_phys_addr_t max_ram_size)
825 uint16_t protocol;
826 uint32_t gpr[8];
827 uint16_t seg[6];
828 uint16_t real_seg;
829 int setup_size, kernel_size, initrd_size = 0, cmdline_size;
830 uint32_t initrd_max;
831 uint8_t header[8192];
832 target_phys_addr_t real_addr, prot_addr, cmdline_addr, initrd_addr = 0;
833 FILE *f, *fi;
834 char *vmode;
836 /* Align to 16 bytes as a paranoia measure */
837 cmdline_size = (strlen(kernel_cmdline)+16) & ~15;
839 /* load the kernel header */
840 f = fopen(kernel_filename, "rb");
841 if (!f || !(kernel_size = get_file_size(f)) ||
842 fread(header, 1, MIN(ARRAY_SIZE(header), kernel_size), f) !=
843 MIN(ARRAY_SIZE(header), kernel_size)) {
844 fprintf(stderr, "qemu: could not load kernel '%s'\n",
845 kernel_filename);
846 exit(1);
849 /* kernel protocol version */
850 #if 0
851 fprintf(stderr, "header magic: %#x\n", ldl_p(header+0x202));
852 #endif
853 if (ldl_p(header+0x202) == 0x53726448)
854 protocol = lduw_p(header+0x206);
855 else {
856 /* This looks like a multiboot kernel. If it is, let's stop
857 treating it like a Linux kernel. */
858 if (load_multiboot(fw_cfg, f, kernel_filename,
859 initrd_filename, kernel_cmdline, header))
860 return;
861 protocol = 0;
864 if (protocol < 0x200 || !(header[0x211] & 0x01)) {
865 /* Low kernel */
866 real_addr = 0x90000;
867 cmdline_addr = 0x9a000 - cmdline_size;
868 prot_addr = 0x10000;
869 } else if (protocol < 0x202) {
870 /* High but ancient kernel */
871 real_addr = 0x90000;
872 cmdline_addr = 0x9a000 - cmdline_size;
873 prot_addr = 0x100000;
874 } else {
875 /* High and recent kernel */
876 real_addr = 0x10000;
877 cmdline_addr = 0x20000;
878 prot_addr = 0x100000;
881 #if 0
882 fprintf(stderr,
883 "qemu: real_addr = 0x" TARGET_FMT_plx "\n"
884 "qemu: cmdline_addr = 0x" TARGET_FMT_plx "\n"
885 "qemu: prot_addr = 0x" TARGET_FMT_plx "\n",
886 real_addr,
887 cmdline_addr,
888 prot_addr);
889 #endif
891 /* highest address for loading the initrd */
892 if (protocol >= 0x203)
893 initrd_max = ldl_p(header+0x22c);
894 else
895 initrd_max = 0x37ffffff;
897 if (initrd_max >= max_ram_size-ACPI_DATA_SIZE)
898 initrd_max = max_ram_size-ACPI_DATA_SIZE-1;
900 /* kernel command line */
901 pstrcpy_targphys(cmdline_addr, 4096, kernel_cmdline);
903 if (protocol >= 0x202) {
904 stl_p(header+0x228, cmdline_addr);
905 } else {
906 stw_p(header+0x20, 0xA33F);
907 stw_p(header+0x22, cmdline_addr-real_addr);
910 /* handle vga= parameter */
911 vmode = strstr(kernel_cmdline, "vga=");
912 if (vmode) {
913 unsigned int video_mode;
914 /* skip "vga=" */
915 vmode += 4;
916 if (!strncmp(vmode, "normal", 6)) {
917 video_mode = 0xffff;
918 } else if (!strncmp(vmode, "ext", 3)) {
919 video_mode = 0xfffe;
920 } else if (!strncmp(vmode, "ask", 3)) {
921 video_mode = 0xfffd;
922 } else {
923 video_mode = strtol(vmode, NULL, 0);
925 stw_p(header+0x1fa, video_mode);
928 /* loader type */
929 /* High nybble = B reserved for Qemu; low nybble is revision number.
930 If this code is substantially changed, you may want to consider
931 incrementing the revision. */
932 if (protocol >= 0x200)
933 header[0x210] = 0xB0;
935 /* heap */
936 if (protocol >= 0x201) {
937 header[0x211] |= 0x80; /* CAN_USE_HEAP */
938 stw_p(header+0x224, cmdline_addr-real_addr-0x200);
941 /* load initrd */
942 if (initrd_filename) {
943 if (protocol < 0x200) {
944 fprintf(stderr, "qemu: linux kernel too old to load a ram disk\n");
945 exit(1);
948 fi = fopen(initrd_filename, "rb");
949 if (!fi) {
950 fprintf(stderr, "qemu: could not load initial ram disk '%s'\n",
951 initrd_filename);
952 exit(1);
955 initrd_size = get_file_size(fi);
956 initrd_addr = (initrd_max-initrd_size) & ~4095;
958 if (!fread_targphys_ok(initrd_addr, initrd_size, fi)) {
959 fprintf(stderr, "qemu: read error on initial ram disk '%s'\n",
960 initrd_filename);
961 exit(1);
963 fclose(fi);
965 stl_p(header+0x218, initrd_addr);
966 stl_p(header+0x21c, initrd_size);
969 /* store the finalized header and load the rest of the kernel */
970 cpu_physical_memory_write(real_addr, header, ARRAY_SIZE(header));
972 setup_size = header[0x1f1];
973 if (setup_size == 0)
974 setup_size = 4;
976 setup_size = (setup_size+1)*512;
977 /* Size of protected-mode code */
978 kernel_size -= (setup_size > ARRAY_SIZE(header)) ? setup_size : ARRAY_SIZE(header);
980 /* In case we have read too much already, copy that over */
981 if (setup_size < ARRAY_SIZE(header)) {
982 cpu_physical_memory_write(prot_addr, header + setup_size, ARRAY_SIZE(header) - setup_size);
983 prot_addr += (ARRAY_SIZE(header) - setup_size);
984 setup_size = ARRAY_SIZE(header);
987 if (!fread_targphys_ok(real_addr + ARRAY_SIZE(header),
988 setup_size - ARRAY_SIZE(header), f) ||
989 !fread_targphys_ok(prot_addr, kernel_size, f)) {
990 fprintf(stderr, "qemu: read error on kernel '%s'\n",
991 kernel_filename);
992 exit(1);
994 fclose(f);
996 /* generate bootsector to set up the initial register state */
997 real_seg = real_addr >> 4;
998 seg[0] = seg[2] = seg[3] = seg[4] = seg[4] = real_seg;
999 seg[1] = real_seg+0x20; /* CS */
1000 memset(gpr, 0, sizeof gpr);
1001 gpr[4] = cmdline_addr-real_addr-16; /* SP (-16 is paranoia) */
1003 option_rom_setup_reset(real_addr, setup_size);
1004 option_rom_setup_reset(prot_addr, kernel_size);
1005 option_rom_setup_reset(cmdline_addr, cmdline_size);
1006 if (initrd_filename)
1007 option_rom_setup_reset(initrd_addr, initrd_size);
1009 generate_bootsect(option_rom, gpr, seg, 0);
1012 static const int ide_iobase[2] = { 0x1f0, 0x170 };
1013 static const int ide_iobase2[2] = { 0x3f6, 0x376 };
1014 static const int ide_irq[2] = { 14, 15 };
1016 #define NE2000_NB_MAX 6
1018 static int ne2000_io[NE2000_NB_MAX] = { 0x300, 0x320, 0x340, 0x360, 0x280, 0x380 };
1019 static int ne2000_irq[NE2000_NB_MAX] = { 9, 10, 11, 3, 4, 5 };
1021 static int serial_io[MAX_SERIAL_PORTS] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8 };
1022 static int serial_irq[MAX_SERIAL_PORTS] = { 4, 3, 4, 3 };
1024 static int parallel_io[MAX_PARALLEL_PORTS] = { 0x378, 0x278, 0x3bc };
1025 static int parallel_irq[MAX_PARALLEL_PORTS] = { 7, 7, 7 };
1027 #ifdef HAS_AUDIO
1028 static void audio_init (PCIBus *pci_bus, qemu_irq *pic)
1030 struct soundhw *c;
1032 for (c = soundhw; c->name; ++c) {
1033 if (c->enabled) {
1034 if (c->isa) {
1035 c->init.init_isa(pic);
1036 } else {
1037 if (pci_bus) {
1038 c->init.init_pci(pci_bus);
1044 #endif
1046 static void pc_init_ne2k_isa(NICInfo *nd)
1048 static int nb_ne2k = 0;
1050 if (nb_ne2k == NE2000_NB_MAX)
1051 return;
1052 isa_ne2000_init(ne2000_io[nb_ne2k],
1053 isa_reserve_irq(ne2000_irq[nb_ne2k]), nd);
1054 nb_ne2k++;
1057 static int load_option_rom(const char *oprom, target_phys_addr_t start,
1058 target_phys_addr_t end)
1060 int size;
1061 char *filename;
1063 filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, oprom);
1064 if (filename) {
1065 size = get_image_size(filename);
1066 if (size > 0 && start + size > end) {
1067 fprintf(stderr, "Not enough space to load option rom '%s'\n",
1068 oprom);
1069 exit(1);
1071 size = load_image_targphys(filename, start, end - start);
1072 qemu_free(filename);
1073 } else {
1074 size = -1;
1076 if (size < 0) {
1077 fprintf(stderr, "Could not load option rom '%s'\n", oprom);
1078 exit(1);
1080 /* Round up optiom rom size to the next 2k boundary */
1081 size = (size + 2047) & ~2047;
1082 option_rom_setup_reset(start, size);
1083 return size;
1086 int cpu_is_bsp(CPUState *env)
1088 return env->cpuid_apic_id == 0;
1091 static CPUState *pc_new_cpu(const char *cpu_model)
1093 CPUState *env;
1095 env = cpu_init(cpu_model);
1096 if (!env) {
1097 fprintf(stderr, "Unable to find x86 CPU definition\n");
1098 exit(1);
1100 if ((env->cpuid_features & CPUID_APIC) || smp_cpus > 1) {
1101 env->cpuid_apic_id = env->cpu_index;
1102 /* APIC reset callback resets cpu */
1103 apic_init(env);
1104 } else {
1105 qemu_register_reset((QEMUResetHandler*)cpu_reset, env);
1107 return env;
1110 /* PC hardware initialisation */
1111 static void pc_init1(ram_addr_t ram_size,
1112 const char *boot_device,
1113 const char *kernel_filename,
1114 const char *kernel_cmdline,
1115 const char *initrd_filename,
1116 const char *cpu_model,
1117 int pci_enabled)
1119 char *filename;
1120 int ret, linux_boot, i;
1121 ram_addr_t ram_addr, bios_offset, option_rom_offset;
1122 ram_addr_t below_4g_mem_size, above_4g_mem_size = 0;
1123 int bios_size, isa_bios_size, oprom_area_size;
1124 PCIBus *pci_bus;
1125 PCIDevice *pci_dev;
1126 ISADevice *isa_dev;
1127 int piix3_devfn = -1;
1128 CPUState *env;
1129 qemu_irq *cpu_irq;
1130 qemu_irq *isa_irq;
1131 qemu_irq *i8259;
1132 IsaIrqState *isa_irq_state;
1133 DriveInfo *dinfo;
1134 BlockDriverState *hd[MAX_IDE_BUS * MAX_IDE_DEVS];
1135 BlockDriverState *fd[MAX_FD];
1136 int using_vga = cirrus_vga_enabled || std_vga_enabled || vmsvga_enabled;
1137 void *fw_cfg;
1139 if (ram_size >= 0xe0000000 ) {
1140 above_4g_mem_size = ram_size - 0xe0000000;
1141 below_4g_mem_size = 0xe0000000;
1142 } else {
1143 below_4g_mem_size = ram_size;
1146 linux_boot = (kernel_filename != NULL);
1148 /* init CPUs */
1149 if (cpu_model == NULL) {
1150 #ifdef TARGET_X86_64
1151 cpu_model = "qemu64";
1152 #else
1153 cpu_model = "qemu32";
1154 #endif
1157 for (i = 0; i < smp_cpus; i++) {
1158 env = pc_new_cpu(cpu_model);
1161 vmport_init();
1163 /* allocate RAM */
1164 ram_addr = qemu_ram_alloc(0xa0000);
1165 cpu_register_physical_memory(0, 0xa0000, ram_addr);
1167 /* Allocate, even though we won't register, so we don't break the
1168 * phys_ram_base + PA assumption. This range includes vga (0xa0000 - 0xc0000),
1169 * and some bios areas, which will be registered later
1171 ram_addr = qemu_ram_alloc(0x100000 - 0xa0000);
1172 ram_addr = qemu_ram_alloc(below_4g_mem_size - 0x100000);
1173 cpu_register_physical_memory(0x100000,
1174 below_4g_mem_size - 0x100000,
1175 ram_addr);
1177 /* above 4giga memory allocation */
1178 if (above_4g_mem_size > 0) {
1179 #if TARGET_PHYS_ADDR_BITS == 32
1180 hw_error("To much RAM for 32-bit physical address");
1181 #else
1182 ram_addr = qemu_ram_alloc(above_4g_mem_size);
1183 cpu_register_physical_memory(0x100000000ULL,
1184 above_4g_mem_size,
1185 ram_addr);
1186 #endif
1190 /* BIOS load */
1191 if (bios_name == NULL)
1192 bios_name = BIOS_FILENAME;
1193 filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
1194 if (filename) {
1195 bios_size = get_image_size(filename);
1196 } else {
1197 bios_size = -1;
1199 if (bios_size <= 0 ||
1200 (bios_size % 65536) != 0) {
1201 goto bios_error;
1203 bios_offset = qemu_ram_alloc(bios_size);
1204 ret = load_image(filename, qemu_get_ram_ptr(bios_offset));
1205 if (ret != bios_size) {
1206 bios_error:
1207 fprintf(stderr, "qemu: could not load PC BIOS '%s'\n", bios_name);
1208 exit(1);
1210 if (filename) {
1211 qemu_free(filename);
1213 /* map the last 128KB of the BIOS in ISA space */
1214 isa_bios_size = bios_size;
1215 if (isa_bios_size > (128 * 1024))
1216 isa_bios_size = 128 * 1024;
1217 cpu_register_physical_memory(0x100000 - isa_bios_size,
1218 isa_bios_size,
1219 (bios_offset + bios_size - isa_bios_size) | IO_MEM_ROM);
1223 option_rom_offset = qemu_ram_alloc(0x20000);
1224 oprom_area_size = 0;
1225 cpu_register_physical_memory(0xc0000, 0x20000, option_rom_offset);
1227 if (using_vga) {
1228 const char *vgabios_filename;
1229 /* VGA BIOS load */
1230 if (cirrus_vga_enabled) {
1231 vgabios_filename = VGABIOS_CIRRUS_FILENAME;
1232 } else {
1233 vgabios_filename = VGABIOS_FILENAME;
1235 oprom_area_size = load_option_rom(vgabios_filename, 0xc0000, 0xe0000);
1237 /* Although video roms can grow larger than 0x8000, the area between
1238 * 0xc0000 - 0xc8000 is reserved for them. It means we won't be looking
1239 * for any other kind of option rom inside this area */
1240 if (oprom_area_size < 0x8000)
1241 oprom_area_size = 0x8000;
1243 /* map all the bios at the top of memory */
1244 cpu_register_physical_memory((uint32_t)(-bios_size),
1245 bios_size, bios_offset | IO_MEM_ROM);
1247 fw_cfg = bochs_bios_init();
1249 if (linux_boot) {
1250 load_linux(fw_cfg, 0xc0000 + oprom_area_size,
1251 kernel_filename, initrd_filename, kernel_cmdline, below_4g_mem_size);
1252 oprom_area_size += 2048;
1255 for (i = 0; i < nb_option_roms; i++) {
1256 oprom_area_size += load_option_rom(option_rom[i], 0xc0000 + oprom_area_size,
1257 0xe0000);
1260 for (i = 0; i < nb_nics; i++) {
1261 char nic_oprom[1024];
1262 const char *model = nd_table[i].model;
1264 if (!nd_table[i].bootable)
1265 continue;
1267 if (model == NULL)
1268 model = "e1000";
1269 snprintf(nic_oprom, sizeof(nic_oprom), "pxe-%s.bin", model);
1271 oprom_area_size += load_option_rom(nic_oprom, 0xc0000 + oprom_area_size,
1272 0xe0000);
1275 cpu_irq = qemu_allocate_irqs(pic_irq_request, NULL, 1);
1276 i8259 = i8259_init(cpu_irq[0]);
1277 isa_irq_state = qemu_mallocz(sizeof(*isa_irq_state));
1278 isa_irq_state->i8259 = i8259;
1279 isa_irq = qemu_allocate_irqs(isa_irq_handler, isa_irq_state, 24);
1281 if (pci_enabled) {
1282 pci_bus = i440fx_init(&i440fx_state, isa_irq);
1283 piix3_devfn = piix3_init(pci_bus, -1);
1284 } else {
1285 pci_bus = NULL;
1286 isa_bus_new(NULL);
1288 isa_bus_irqs(isa_irq);
1290 ferr_irq = isa_reserve_irq(13);
1292 /* init basic PC hardware */
1293 register_ioport_write(0x80, 1, 1, ioport80_write, NULL);
1295 register_ioport_write(0xf0, 1, 1, ioportF0_write, NULL);
1297 if (cirrus_vga_enabled) {
1298 if (pci_enabled) {
1299 pci_cirrus_vga_init(pci_bus);
1300 } else {
1301 isa_cirrus_vga_init();
1303 } else if (vmsvga_enabled) {
1304 if (pci_enabled)
1305 pci_vmsvga_init(pci_bus);
1306 else
1307 fprintf(stderr, "%s: vmware_vga: no PCI bus\n", __FUNCTION__);
1308 } else if (std_vga_enabled) {
1309 if (pci_enabled) {
1310 pci_vga_init(pci_bus, 0, 0);
1311 } else {
1312 isa_vga_init();
1316 rtc_state = rtc_init(0x70, isa_reserve_irq(8), 2000);
1318 qemu_register_boot_set(pc_boot_set, rtc_state);
1320 register_ioport_read(0x92, 1, 1, ioport92_read, NULL);
1321 register_ioport_write(0x92, 1, 1, ioport92_write, NULL);
1323 if (pci_enabled) {
1324 isa_irq_state->ioapic = ioapic_init();
1326 pit = pit_init(0x40, isa_reserve_irq(0));
1327 pcspk_init(pit);
1328 if (!no_hpet) {
1329 hpet_init(isa_irq);
1332 for(i = 0; i < MAX_SERIAL_PORTS; i++) {
1333 if (serial_hds[i]) {
1334 serial_init(serial_io[i], isa_reserve_irq(serial_irq[i]), 115200,
1335 serial_hds[i]);
1339 for(i = 0; i < MAX_PARALLEL_PORTS; i++) {
1340 if (parallel_hds[i]) {
1341 parallel_init(parallel_io[i], isa_reserve_irq(parallel_irq[i]),
1342 parallel_hds[i]);
1346 watchdog_pc_init(pci_bus);
1348 for(i = 0; i < nb_nics; i++) {
1349 NICInfo *nd = &nd_table[i];
1351 if (!pci_enabled || (nd->model && strcmp(nd->model, "ne2k_isa") == 0))
1352 pc_init_ne2k_isa(nd);
1353 else
1354 pci_nic_init(nd, "e1000", NULL);
1357 piix4_acpi_system_hot_add_init();
1359 if (drive_get_max_bus(IF_IDE) >= MAX_IDE_BUS) {
1360 fprintf(stderr, "qemu: too many IDE bus\n");
1361 exit(1);
1364 for(i = 0; i < MAX_IDE_BUS * MAX_IDE_DEVS; i++) {
1365 dinfo = drive_get(IF_IDE, i / MAX_IDE_DEVS, i % MAX_IDE_DEVS);
1366 hd[i] = dinfo ? dinfo->bdrv : NULL;
1369 if (pci_enabled) {
1370 pci_piix3_ide_init(pci_bus, hd, piix3_devfn + 1, isa_irq);
1371 } else {
1372 for(i = 0; i < MAX_IDE_BUS; i++) {
1373 isa_ide_init(ide_iobase[i], ide_iobase2[i],
1374 isa_reserve_irq(ide_irq[i]),
1375 hd[MAX_IDE_DEVS * i], hd[MAX_IDE_DEVS * i + 1]);
1379 isa_dev = isa_create_simple("i8042", 0x60, 0x64, 1, 12);
1380 DMA_init(0);
1381 #ifdef HAS_AUDIO
1382 audio_init(pci_enabled ? pci_bus : NULL, isa_irq);
1383 #endif
1385 for(i = 0; i < MAX_FD; i++) {
1386 dinfo = drive_get(IF_FLOPPY, 0, i);
1387 fd[i] = dinfo ? dinfo->bdrv : NULL;
1389 floppy_controller = fdctrl_init_isa(6, 2, 0x3f0, fd);
1391 cmos_init(below_4g_mem_size, above_4g_mem_size, boot_device, hd);
1393 if (pci_enabled && usb_enabled) {
1394 usb_uhci_piix3_init(pci_bus, piix3_devfn + 2);
1397 if (pci_enabled && acpi_enabled) {
1398 uint8_t *eeprom_buf = qemu_mallocz(8 * 256); /* XXX: make this persistent */
1399 i2c_bus *smbus;
1401 /* TODO: Populate SPD eeprom data. */
1402 smbus = piix4_pm_init(pci_bus, piix3_devfn + 3, 0xb100,
1403 isa_reserve_irq(9));
1404 for (i = 0; i < 8; i++) {
1405 DeviceState *eeprom;
1406 eeprom = qdev_create((BusState *)smbus, "smbus-eeprom");
1407 qdev_prop_set_uint32(eeprom, "address", 0x50 + i);
1408 qdev_prop_set_ptr(eeprom, "data", eeprom_buf + (i * 256));
1409 qdev_init(eeprom);
1413 if (i440fx_state) {
1414 i440fx_init_memory_mappings(i440fx_state);
1417 if (pci_enabled) {
1418 int max_bus;
1419 int bus;
1421 max_bus = drive_get_max_bus(IF_SCSI);
1422 for (bus = 0; bus <= max_bus; bus++) {
1423 pci_create_simple(pci_bus, -1, "lsi53c895a");
1427 /* Add virtio balloon device */
1428 if (pci_enabled && virtio_balloon) {
1429 pci_dev = pci_create("virtio-balloon-pci", virtio_balloon_devaddr);
1430 qdev_init(&pci_dev->qdev);
1433 /* Add virtio console devices */
1434 if (pci_enabled) {
1435 for(i = 0; i < MAX_VIRTIO_CONSOLES; i++) {
1436 if (virtcon_hds[i]) {
1437 pci_create_simple(pci_bus, -1, "virtio-console-pci");
1443 static void pc_init_pci(ram_addr_t ram_size,
1444 const char *boot_device,
1445 const char *kernel_filename,
1446 const char *kernel_cmdline,
1447 const char *initrd_filename,
1448 const char *cpu_model)
1450 pc_init1(ram_size, boot_device,
1451 kernel_filename, kernel_cmdline,
1452 initrd_filename, cpu_model, 1);
1455 static void pc_init_isa(ram_addr_t ram_size,
1456 const char *boot_device,
1457 const char *kernel_filename,
1458 const char *kernel_cmdline,
1459 const char *initrd_filename,
1460 const char *cpu_model)
1462 pc_init1(ram_size, boot_device,
1463 kernel_filename, kernel_cmdline,
1464 initrd_filename, cpu_model, 0);
1467 /* set CMOS shutdown status register (index 0xF) as S3_resume(0xFE)
1468 BIOS will read it and start S3 resume at POST Entry */
1469 void cmos_set_s3_resume(void)
1471 if (rtc_state)
1472 rtc_set_memory(rtc_state, 0xF, 0xFE);
1475 static QEMUMachine pc_machine = {
1476 .name = "pc-0.11",
1477 .alias = "pc",
1478 .desc = "Standard PC",
1479 .init = pc_init_pci,
1480 .max_cpus = 255,
1481 .is_default = 1,
1484 static QEMUMachine pc_machine_v0_10 = {
1485 .name = "pc-0.10",
1486 .desc = "Standard PC, qemu 0.10",
1487 .init = pc_init_pci,
1488 .max_cpus = 255,
1489 .compat_props = (CompatProperty[]) {
1491 .driver = "virtio-blk-pci",
1492 .property = "class",
1493 .value = stringify(PCI_CLASS_STORAGE_OTHER),
1495 .driver = "virtio-console-pci",
1496 .property = "class",
1497 .value = stringify(PCI_CLASS_DISPLAY_OTHER),
1499 .driver = "virtio-net-pci",
1500 .property = "vectors",
1501 .value = stringify(0),
1503 .driver = "virtio-blk-pci",
1504 .property = "vectors",
1505 .value = stringify(0),
1507 { /* end of list */ }
1511 static QEMUMachine isapc_machine = {
1512 .name = "isapc",
1513 .desc = "ISA-only PC",
1514 .init = pc_init_isa,
1515 .max_cpus = 1,
1518 static void pc_machine_init(void)
1520 qemu_register_machine(&pc_machine);
1521 qemu_register_machine(&pc_machine_v0_10);
1522 qemu_register_machine(&isapc_machine);
1525 machine_init(pc_machine_init);