hw/virtio-pci.c

   1 /*
   2  * Virtio PCI Bindings
   3  *
   4  * Copyright IBM, Corp. 2007
   5  * Copyright (c) 2009 CodeSourcery
   6  *
   7  * Authors:
   8  *  Anthony Liguori   <aliguori@us.ibm.com>
   9  *  Paul Brook        <paul@codesourcery.com>
  10  *
  11  * This work is licensed under the terms of the GNU GPL, version 2.  See
  12  * the COPYING file in the top-level directory.
  13  *
  14  */
  15
  16 #include <inttypes.h>
  17
  18 #include "virtio.h"
  19 #include "virtio-blk.h"
  20 #include "virtio-net.h"
  21 #include "virtio-serial.h"
  22 #include "pci.h"
  23 #include "qemu-error.h"
  24 #include "msix.h"
  25 #include "net.h"
  26 #include "loader.h"
  27 #include "kvm.h"
  28 #include "blockdev.h"
  29 #include "virtio-pci.h"
  30
  31 /* from Linux's linux/virtio_pci.h */
  32
  33 /* A 32-bit r/o bitmask of the features supported by the host */
  34 #define VIRTIO_PCI_HOST_FEATURES        0
  35
  36 /* A 32-bit r/w bitmask of features activated by the guest */
  37 #define VIRTIO_PCI_GUEST_FEATURES       4
  38
  39 /* A 32-bit r/w PFN for the currently selected queue */
  40 #define VIRTIO_PCI_QUEUE_PFN            8
  41
  42 /* A 16-bit r/o queue size for the currently selected queue */
  43 #define VIRTIO_PCI_QUEUE_NUM            12
  44
  45 /* A 16-bit r/w queue selector */
  46 #define VIRTIO_PCI_QUEUE_SEL            14
  47
  48 /* A 16-bit r/w queue notifier */
  49 #define VIRTIO_PCI_QUEUE_NOTIFY         16
  50
  51 /* An 8-bit device status register.  */
  52 #define VIRTIO_PCI_STATUS               18
  53
  54 /* An 8-bit r/o interrupt status register.  Reading the value will return the
  55  * current contents of the ISR and will also clear it.  This is effectively
  56  * a read-and-acknowledge. */
  57 #define VIRTIO_PCI_ISR                  19
  58
  59 /* MSI-X registers: only enabled if MSI-X is enabled. */
  60 /* A 16-bit vector for configuration changes. */
  61 #define VIRTIO_MSI_CONFIG_VECTOR        20
  62 /* A 16-bit vector for selected queue notifications. */
  63 #define VIRTIO_MSI_QUEUE_VECTOR         22
  64
  65 /* Config space size */
  66 #define VIRTIO_PCI_CONFIG_NOMSI         20
  67 #define VIRTIO_PCI_CONFIG_MSI           24
  68 #define VIRTIO_PCI_REGION_SIZE(dev)     (msix_present(dev) ? \
  69                                          VIRTIO_PCI_CONFIG_MSI : \
  70                                          VIRTIO_PCI_CONFIG_NOMSI)
  71
  72 /* The remaining space is defined by each driver as the per-driver
  73  * configuration space */
  74 #define VIRTIO_PCI_CONFIG(dev)          (msix_enabled(dev) ? \
  75                                          VIRTIO_PCI_CONFIG_MSI : \
  76                                          VIRTIO_PCI_CONFIG_NOMSI)
  77
  78 /* How many bits to shift physical queue address written to QUEUE_PFN.
  79  * 12 is historical, and due to x86 page size. */
  80 #define VIRTIO_PCI_QUEUE_ADDR_SHIFT    12
  81
  82 /* Flags track per-device state like workarounds for quirks in older guests. */
  83 #define VIRTIO_PCI_FLAG_BUS_MASTER_BUG  (1 << 0)
  84
  85 /* Performance improves when virtqueue kick processing is decoupled from the
  86  * vcpu thread using ioeventfd for some devices. */
  87 #define VIRTIO_PCI_FLAG_USE_IOEVENTFD_BIT 1
  88 #define VIRTIO_PCI_FLAG_USE_IOEVENTFD   (1 << VIRTIO_PCI_FLAG_USE_IOEVENTFD_BIT)
  89
  90 /* QEMU doesn't strictly need write barriers since everything runs in
  91  * lock-step.  We'll leave the calls to wmb() in though to make it obvious for
  92  * KVM or if kqemu gets SMP support.
  93  */
  94 #define wmb() do { } while (0)
  95
  96 /* virtio device */
  97
  98 static void virtio_pci_notify(void *opaque, uint16_t vector)
  99 {
 100     VirtIOPCIProxy *proxy = opaque;
 101     if (msix_enabled(&proxy->pci_dev))
 102         msix_notify(&proxy->pci_dev, vector);
 103     else
 104         qemu_set_irq(proxy->pci_dev.irq[0], proxy->vdev->isr & 1);
 105 }
 106
 107 static void virtio_pci_save_config(void * opaque, QEMUFile *f)
 108 {
 109     VirtIOPCIProxy *proxy = opaque;
 110     pci_device_save(&proxy->pci_dev, f);
 111     msix_save(&proxy->pci_dev, f);
 112     if (msix_present(&proxy->pci_dev))
 113         qemu_put_be16(f, proxy->vdev->config_vector);
 114 }
 115
 116 static void virtio_pci_save_queue(void * opaque, int n, QEMUFile *f)
 117 {
 118     VirtIOPCIProxy *proxy = opaque;
 119     if (msix_present(&proxy->pci_dev))
 120         qemu_put_be16(f, virtio_queue_vector(proxy->vdev, n));
 121 }
 122
 123 static int virtio_pci_load_config(void * opaque, QEMUFile *f)
 124 {
 125     VirtIOPCIProxy *proxy = opaque;
 126     int ret;
 127     ret = pci_device_load(&proxy->pci_dev, f);
 128     if (ret) {
 129         return ret;
 130     }
 131     msix_load(&proxy->pci_dev, f);
 132     if (msix_present(&proxy->pci_dev)) {
 133         qemu_get_be16s(f, &proxy->vdev->config_vector);
 134     } else {
 135         proxy->vdev->config_vector = VIRTIO_NO_VECTOR;
 136     }
 137     if (proxy->vdev->config_vector != VIRTIO_NO_VECTOR) {
 138         return msix_vector_use(&proxy->pci_dev, proxy->vdev->config_vector);
 139     }
 140     return 0;
 141 }
 142
 143 static int virtio_pci_load_queue(void * opaque, int n, QEMUFile *f)
 144 {
 145     VirtIOPCIProxy *proxy = opaque;
 146     uint16_t vector;
 147     if (msix_present(&proxy->pci_dev)) {
 148         qemu_get_be16s(f, &vector);
 149     } else {
 150         vector = VIRTIO_NO_VECTOR;
 151     }
 152     virtio_queue_set_vector(proxy->vdev, n, vector);
 153     if (vector != VIRTIO_NO_VECTOR) {
 154         return msix_vector_use(&proxy->pci_dev, vector);
 155     }
 156     return 0;
 157 }
 158
 159 static int virtio_pci_set_host_notifier_internal(VirtIOPCIProxy *proxy,
 160                                                  int n, bool assign)
 161 {
 162     VirtQueue *vq = virtio_get_queue(proxy->vdev, n);
 163     EventNotifier *notifier = virtio_queue_get_host_notifier(vq);
 164     int r;
 165     if (assign) {
 166         r = event_notifier_init(notifier, 1);
 167         if (r < 0) {
 168             error_report("%s: unable to init event notifier: %d",
 169                          __func__, r);
 170             return r;
 171         }
 172         r = kvm_set_ioeventfd_pio_word(event_notifier_get_fd(notifier),
 173                                        proxy->addr + VIRTIO_PCI_QUEUE_NOTIFY,
 174                                        n, assign);
 175         if (r < 0) {
 176             error_report("%s: unable to map ioeventfd: %d",
 177                          __func__, r);
 178             event_notifier_cleanup(notifier);
 179         }
 180     } else {
 181         r = kvm_set_ioeventfd_pio_word(event_notifier_get_fd(notifier),
 182                                        proxy->addr + VIRTIO_PCI_QUEUE_NOTIFY,
 183                                        n, assign);
 184         if (r < 0) {
 185             error_report("%s: unable to unmap ioeventfd: %d",
 186                          __func__, r);
 187             return r;
 188         }
 189
 190         /* Handle the race condition where the guest kicked and we deassigned
 191          * before we got around to handling the kick.
 192          */
 193         if (event_notifier_test_and_clear(notifier)) {
 194             virtio_queue_notify_vq(vq);
 195         }
 196
 197         event_notifier_cleanup(notifier);
 198     }
 199     return r;
 200 }
 201
 202 static void virtio_pci_host_notifier_read(void *opaque)
 203 {
 204     VirtQueue *vq = opaque;
 205     EventNotifier *n = virtio_queue_get_host_notifier(vq);
 206     if (event_notifier_test_and_clear(n)) {
 207         virtio_queue_notify_vq(vq);
 208     }
 209 }
 210
 211 static void virtio_pci_set_host_notifier_fd_handler(VirtIOPCIProxy *proxy,
 212                                                     int n, bool assign)
 213 {
 214     VirtQueue *vq = virtio_get_queue(proxy->vdev, n);
 215     EventNotifier *notifier = virtio_queue_get_host_notifier(vq);
 216     if (assign) {
 217         qemu_set_fd_handler(event_notifier_get_fd(notifier),
 218                             virtio_pci_host_notifier_read, NULL, vq);
 219     } else {
 220         qemu_set_fd_handler(event_notifier_get_fd(notifier),
 221                             NULL, NULL, NULL);
 222     }
 223 }
 224
 225 static void virtio_pci_start_ioeventfd(VirtIOPCIProxy *proxy)
 226 {
 227     int n, r;
 228
 229     if (!(proxy->flags & VIRTIO_PCI_FLAG_USE_IOEVENTFD) ||
 230         proxy->ioeventfd_disabled ||
 231         proxy->ioeventfd_started) {
 232         return;
 233     }
 234
 235     for (n = 0; n < VIRTIO_PCI_QUEUE_MAX; n++) {
 236         if (!virtio_queue_get_num(proxy->vdev, n)) {
 237             continue;
 238         }
 239
 240         r = virtio_pci_set_host_notifier_internal(proxy, n, true);
 241         if (r < 0) {
 242             goto assign_error;
 243         }
 244
 245         virtio_pci_set_host_notifier_fd_handler(proxy, n, true);
 246     }
 247     proxy->ioeventfd_started = true;
 248     return;
 249
 250 assign_error:
 251     while (--n >= 0) {
 252         if (!virtio_queue_get_num(proxy->vdev, n)) {
 253             continue;
 254         }
 255
 256         virtio_pci_set_host_notifier_fd_handler(proxy, n, false);
 257         r = virtio_pci_set_host_notifier_internal(proxy, n, false);
 258         assert(r >= 0);
 259     }
 260     proxy->ioeventfd_started = false;
 261     error_report("%s: failed. Fallback to a userspace (slower).", __func__);
 262 }
 263
 264 static void virtio_pci_stop_ioeventfd(VirtIOPCIProxy *proxy)
 265 {
 266     int r;
 267     int n;
 268
 269     if (!proxy->ioeventfd_started) {
 270         return;
 271     }
 272
 273     for (n = 0; n < VIRTIO_PCI_QUEUE_MAX; n++) {
 274         if (!virtio_queue_get_num(proxy->vdev, n)) {
 275             continue;
 276         }
 277
 278         virtio_pci_set_host_notifier_fd_handler(proxy, n, false);
 279         r = virtio_pci_set_host_notifier_internal(proxy, n, false);
 280         assert(r >= 0);
 281     }
 282     proxy->ioeventfd_started = false;
 283 }
 284
 285 static void virtio_pci_reset(DeviceState *d)
 286 {
 287     VirtIOPCIProxy *proxy = container_of(d, VirtIOPCIProxy, pci_dev.qdev);
 288     virtio_pci_stop_ioeventfd(proxy);
 289     virtio_reset(proxy->vdev);
 290     msix_reset(&proxy->pci_dev);
 291     proxy->flags &= ~VIRTIO_PCI_FLAG_BUS_MASTER_BUG;
 292 }
 293
 294 static void virtio_ioport_write(void *opaque, uint32_t addr, uint32_t val)
 295 {
 296     VirtIOPCIProxy *proxy = opaque;
 297     VirtIODevice *vdev = proxy->vdev;
 298     target_phys_addr_t pa;
 299
 300     switch (addr) {
 301     case VIRTIO_PCI_GUEST_FEATURES:
 302         /* Guest does not negotiate properly?  We have to assume nothing. */
 303         if (val & (1 << VIRTIO_F_BAD_FEATURE)) {
 304             if (vdev->bad_features)
 305                 val = proxy->host_features & vdev->bad_features(vdev);
 306             else
 307                 val = 0;
 308         }
 309         if (vdev->set_features)
 310             vdev->set_features(vdev, val);
 311         vdev->guest_features = val;
 312         break;
 313     case VIRTIO_PCI_QUEUE_PFN:
 314         pa = (target_phys_addr_t)val << VIRTIO_PCI_QUEUE_ADDR_SHIFT;
 315         if (pa == 0) {
 316             virtio_pci_stop_ioeventfd(proxy);
 317             virtio_reset(proxy->vdev);
 318             msix_unuse_all_vectors(&proxy->pci_dev);
 319         }
 320         else
 321             virtio_queue_set_addr(vdev, vdev->queue_sel, pa);
 322         break;
 323     case VIRTIO_PCI_QUEUE_SEL:
 324         if (val < VIRTIO_PCI_QUEUE_MAX)
 325             vdev->queue_sel = val;
 326         break;
 327     case VIRTIO_PCI_QUEUE_NOTIFY:
 328         if (val < VIRTIO_PCI_QUEUE_MAX) {
 329             virtio_queue_notify(vdev, val);
 330         }
 331         break;
 332     case VIRTIO_PCI_STATUS:
 333         if (!(val & VIRTIO_CONFIG_S_DRIVER_OK)) {
 334             virtio_pci_stop_ioeventfd(proxy);
 335         }
 336
 337         virtio_set_status(vdev, val & 0xFF);
 338
 339         if (val & VIRTIO_CONFIG_S_DRIVER_OK) {
 340             virtio_pci_start_ioeventfd(proxy);
 341         }
 342
 343         if (vdev->status == 0) {
 344             virtio_reset(proxy->vdev);
 345             msix_unuse_all_vectors(&proxy->pci_dev);
 346         }
 347
 348         /* Linux before 2.6.34 sets the device as OK without enabling
 349            the PCI device bus master bit. In this case we need to disable
 350            some safety checks. */
 351         if ((val & VIRTIO_CONFIG_S_DRIVER_OK) &&
 352             !(proxy->pci_dev.config[PCI_COMMAND] & PCI_COMMAND_MASTER)) {
 353             proxy->flags |= VIRTIO_PCI_FLAG_BUS_MASTER_BUG;
 354         }
 355         break;
 356     case VIRTIO_MSI_CONFIG_VECTOR:
 357         msix_vector_unuse(&proxy->pci_dev, vdev->config_vector);
 358         /* Make it possible for guest to discover an error took place. */
 359         if (msix_vector_use(&proxy->pci_dev, val) < 0)
 360             val = VIRTIO_NO_VECTOR;
 361         vdev->config_vector = val;
 362         break;
 363     case VIRTIO_MSI_QUEUE_VECTOR:
 364         msix_vector_unuse(&proxy->pci_dev,
 365                           virtio_queue_vector(vdev, vdev->queue_sel));
 366         /* Make it possible for guest to discover an error took place. */
 367         if (msix_vector_use(&proxy->pci_dev, val) < 0)
 368             val = VIRTIO_NO_VECTOR;
 369         virtio_queue_set_vector(vdev, vdev->queue_sel, val);
 370         break;
 371     default:
 372         error_report("%s: unexpected address 0x%x value 0x%x",
 373                      __func__, addr, val);
 374         break;
 375     }
 376 }
 377
 378 static uint32_t virtio_ioport_read(VirtIOPCIProxy *proxy, uint32_t addr)
 379 {
 380     VirtIODevice *vdev = proxy->vdev;
 381     uint32_t ret = 0xFFFFFFFF;
 382
 383     switch (addr) {
 384     case VIRTIO_PCI_HOST_FEATURES:
 385         ret = proxy->host_features;
 386         break;
 387     case VIRTIO_PCI_GUEST_FEATURES:
 388         ret = vdev->guest_features;
 389         break;
 390     case VIRTIO_PCI_QUEUE_PFN:
 391         ret = virtio_queue_get_addr(vdev, vdev->queue_sel)
 392               >> VIRTIO_PCI_QUEUE_ADDR_SHIFT;
 393         break;
 394     case VIRTIO_PCI_QUEUE_NUM:
 395         ret = virtio_queue_get_num(vdev, vdev->queue_sel);
 396         break;
 397     case VIRTIO_PCI_QUEUE_SEL:
 398         ret = vdev->queue_sel;
 399         break;
 400     case VIRTIO_PCI_STATUS:
 401         ret = vdev->status;
 402         break;
 403     case VIRTIO_PCI_ISR:
 404         /* reading from the ISR also clears it. */
 405         ret = vdev->isr;
 406         vdev->isr = 0;
 407         qemu_set_irq(proxy->pci_dev.irq[0], 0);
 408         break;
 409     case VIRTIO_MSI_CONFIG_VECTOR:
 410         ret = vdev->config_vector;
 411         break;
 412     case VIRTIO_MSI_QUEUE_VECTOR:
 413         ret = virtio_queue_vector(vdev, vdev->queue_sel);
 414         break;
 415     default:
 416         break;
 417     }
 418
 419     return ret;
 420 }
 421
 422 static uint32_t virtio_pci_config_readb(void *opaque, uint32_t addr)
 423 {
 424     VirtIOPCIProxy *proxy = opaque;
 425     uint32_t config = VIRTIO_PCI_CONFIG(&proxy->pci_dev);
 426     addr -= proxy->addr;
 427     if (addr < config)
 428         return virtio_ioport_read(proxy, addr);
 429     addr -= config;
 430     return virtio_config_readb(proxy->vdev, addr);
 431 }
 432
 433 static uint32_t virtio_pci_config_readw(void *opaque, uint32_t addr)
 434 {
 435     VirtIOPCIProxy *proxy = opaque;
 436     uint32_t config = VIRTIO_PCI_CONFIG(&proxy->pci_dev);
 437     addr -= proxy->addr;
 438     if (addr < config)
 439         return virtio_ioport_read(proxy, addr);
 440     addr -= config;
 441     return virtio_config_readw(proxy->vdev, addr);
 442 }
 443
 444 static uint32_t virtio_pci_config_readl(void *opaque, uint32_t addr)
 445 {
 446     VirtIOPCIProxy *proxy = opaque;
 447     uint32_t config = VIRTIO_PCI_CONFIG(&proxy->pci_dev);
 448     addr -= proxy->addr;
 449     if (addr < config)
 450         return virtio_ioport_read(proxy, addr);
 451     addr -= config;
 452     return virtio_config_readl(proxy->vdev, addr);
 453 }
 454
 455 static void virtio_pci_config_writeb(void *opaque, uint32_t addr, uint32_t val)
 456 {
 457     VirtIOPCIProxy *proxy = opaque;
 458     uint32_t config = VIRTIO_PCI_CONFIG(&proxy->pci_dev);
 459     addr -= proxy->addr;
 460     if (addr < config) {
 461         virtio_ioport_write(proxy, addr, val);
 462         return;
 463     }
 464     addr -= config;
 465     virtio_config_writeb(proxy->vdev, addr, val);
 466 }
 467
 468 static void virtio_pci_config_writew(void *opaque, uint32_t addr, uint32_t val)
 469 {
 470     VirtIOPCIProxy *proxy = opaque;
 471     uint32_t config = VIRTIO_PCI_CONFIG(&proxy->pci_dev);
 472     addr -= proxy->addr;
 473     if (addr < config) {
 474         virtio_ioport_write(proxy, addr, val);
 475         return;
 476     }
 477     addr -= config;
 478     virtio_config_writew(proxy->vdev, addr, val);
 479 }
 480
 481 static void virtio_pci_config_writel(void *opaque, uint32_t addr, uint32_t val)
 482 {
 483     VirtIOPCIProxy *proxy = opaque;
 484     uint32_t config = VIRTIO_PCI_CONFIG(&proxy->pci_dev);
 485     addr -= proxy->addr;
 486     if (addr < config) {
 487         virtio_ioport_write(proxy, addr, val);
 488         return;
 489     }
 490     addr -= config;
 491     virtio_config_writel(proxy->vdev, addr, val);
 492 }
 493
 494 static void virtio_map(PCIDevice *pci_dev, int region_num,
 495                        pcibus_t addr, pcibus_t size, int type)
 496 {
 497     VirtIOPCIProxy *proxy = container_of(pci_dev, VirtIOPCIProxy, pci_dev);
 498     VirtIODevice *vdev = proxy->vdev;
 499     unsigned config_len = VIRTIO_PCI_REGION_SIZE(pci_dev) + vdev->config_len;
 500
 501     proxy->addr = addr;
 502
 503     register_ioport_write(addr, config_len, 1, virtio_pci_config_writeb, proxy);
 504     register_ioport_write(addr, config_len, 2, virtio_pci_config_writew, proxy);
 505     register_ioport_write(addr, config_len, 4, virtio_pci_config_writel, proxy);
 506     register_ioport_read(addr, config_len, 1, virtio_pci_config_readb, proxy);
 507     register_ioport_read(addr, config_len, 2, virtio_pci_config_readw, proxy);
 508     register_ioport_read(addr, config_len, 4, virtio_pci_config_readl, proxy);
 509
 510     if (vdev->config_len)
 511         vdev->get_config(vdev, vdev->config);
 512 }
 513
 514 static void virtio_write_config(PCIDevice *pci_dev, uint32_t address,
 515                                 uint32_t val, int len)
 516 {
 517     VirtIOPCIProxy *proxy = DO_UPCAST(VirtIOPCIProxy, pci_dev, pci_dev);
 518
 519     if (PCI_COMMAND == address) {
 520         if (!(val & PCI_COMMAND_MASTER)) {
 521             if (!(proxy->flags & VIRTIO_PCI_FLAG_BUS_MASTER_BUG)) {
 522                 virtio_pci_stop_ioeventfd(proxy);
 523                 virtio_set_status(proxy->vdev,
 524                                   proxy->vdev->status & ~VIRTIO_CONFIG_S_DRIVER_OK);
 525             }
 526         }
 527     }
 528
 529     pci_default_write_config(pci_dev, address, val, len);
 530     msix_write_config(pci_dev, address, val, len);
 531 }
 532
 533 static unsigned virtio_pci_get_features(void *opaque)
 534 {
 535     VirtIOPCIProxy *proxy = opaque;
 536     return proxy->host_features;
 537 }
 538
 539 static void virtio_pci_guest_notifier_read(void *opaque)
 540 {
 541     VirtQueue *vq = opaque;
 542     EventNotifier *n = virtio_queue_get_guest_notifier(vq);
 543     if (event_notifier_test_and_clear(n)) {
 544         virtio_irq(vq);
 545     }
 546 }
 547
 548 static int virtio_pci_set_guest_notifier(void *opaque, int n, bool assign)
 549 {
 550     VirtIOPCIProxy *proxy = opaque;
 551     VirtQueue *vq = virtio_get_queue(proxy->vdev, n);
 552     EventNotifier *notifier = virtio_queue_get_guest_notifier(vq);
 553
 554     if (assign) {
 555         int r = event_notifier_init(notifier, 0);
 556         if (r < 0) {
 557             return r;
 558         }
 559         qemu_set_fd_handler(event_notifier_get_fd(notifier),
 560                             virtio_pci_guest_notifier_read, NULL, vq);
 561     } else {
 562         qemu_set_fd_handler(event_notifier_get_fd(notifier),
 563                             NULL, NULL, NULL);
 564         event_notifier_cleanup(notifier);
 565     }
 566
 567     return 0;
 568 }
 569
 570 static bool virtio_pci_query_guest_notifiers(void *opaque)
 571 {
 572     VirtIOPCIProxy *proxy = opaque;
 573     return msix_enabled(&proxy->pci_dev);
 574 }
 575
 576 static int virtio_pci_set_guest_notifiers(void *opaque, bool assign)
 577 {
 578     VirtIOPCIProxy *proxy = opaque;
 579     VirtIODevice *vdev = proxy->vdev;
 580     int r, n;
 581
 582     for (n = 0; n < VIRTIO_PCI_QUEUE_MAX; n++) {
 583         if (!virtio_queue_get_num(vdev, n)) {
 584             break;
 585         }
 586
 587         r = virtio_pci_set_guest_notifier(opaque, n, assign);
 588         if (r < 0) {
 589             goto assign_error;
 590         }
 591     }
 592
 593     return 0;
 594
 595 assign_error:
 596     /* We get here on assignment failure. Recover by undoing for VQs 0 .. n. */
 597     while (--n >= 0) {
 598         virtio_pci_set_guest_notifier(opaque, n, !assign);
 599     }
 600     return r;
 601 }
 602
 603 static int virtio_pci_set_host_notifier(void *opaque, int n, bool assign)
 604 {
 605     VirtIOPCIProxy *proxy = opaque;
 606
 607     /* Stop using ioeventfd for virtqueue kick if the device starts using host
 608      * notifiers.  This makes it easy to avoid stepping on each others' toes.
 609      */
 610     proxy->ioeventfd_disabled = assign;
 611     if (assign) {
 612         virtio_pci_stop_ioeventfd(proxy);
 613     }
 614     /* We don't need to start here: it's not needed because backend
 615      * currently only stops on status change away from ok,
 616      * reset, vmstop and such. If we do add code to start here,
 617      * need to check vmstate, device state etc. */
 618     return virtio_pci_set_host_notifier_internal(proxy, n, assign);
 619 }
 620
 621 static void virtio_pci_vmstate_change(void *opaque, bool running)
 622 {
 623     VirtIOPCIProxy *proxy = opaque;
 624
 625     if (running) {
 626         /* Try to find out if the guest has bus master disabled, but is
 627            in ready state. Then we have a buggy guest OS. */
 628         if ((proxy->vdev->status & VIRTIO_CONFIG_S_DRIVER_OK) &&
 629             !(proxy->pci_dev.config[PCI_COMMAND] & PCI_COMMAND_MASTER)) {
 630             proxy->flags |= VIRTIO_PCI_FLAG_BUS_MASTER_BUG;
 631         }
 632         virtio_pci_start_ioeventfd(proxy);
 633     } else {
 634         virtio_pci_stop_ioeventfd(proxy);
 635     }
 636 }
 637
 638 static const VirtIOBindings virtio_pci_bindings = {
 639     .notify = virtio_pci_notify,
 640     .save_config = virtio_pci_save_config,
 641     .load_config = virtio_pci_load_config,
 642     .save_queue = virtio_pci_save_queue,
 643     .load_queue = virtio_pci_load_queue,
 644     .get_features = virtio_pci_get_features,
 645     .query_guest_notifiers = virtio_pci_query_guest_notifiers,
 646     .set_host_notifier = virtio_pci_set_host_notifier,
 647     .set_guest_notifiers = virtio_pci_set_guest_notifiers,
 648     .vmstate_change = virtio_pci_vmstate_change,
 649 };
 650
 651 void virtio_init_pci(VirtIOPCIProxy *proxy, VirtIODevice *vdev)
 652 {
 653     uint8_t *config;
 654     uint32_t size;
 655
 656     proxy->vdev = vdev;
 657
 658     config = proxy->pci_dev.config;
 659
 660     if (proxy->class_code) {
 661         pci_config_set_class(config, proxy->class_code);
 662     }
 663     pci_set_word(config + 0x2c, pci_get_word(config + PCI_VENDOR_ID));
 664     pci_set_word(config + 0x2e, vdev->device_id);
 665     config[0x3d] = 1;
 666
 667     if (vdev->nvectors && !msix_init(&proxy->pci_dev, vdev->nvectors, 1, 0)) {
 668         pci_register_bar(&proxy->pci_dev, 1,
 669                          msix_bar_size(&proxy->pci_dev),
 670                          PCI_BASE_ADDRESS_SPACE_MEMORY,
 671                          msix_mmio_map);
 672     } else
 673         vdev->nvectors = 0;
 674
 675     proxy->pci_dev.config_write = virtio_write_config;
 676
 677     size = VIRTIO_PCI_REGION_SIZE(&proxy->pci_dev) + vdev->config_len;
 678     if (size & (size-1))
 679         size = 1 << qemu_fls(size);
 680
 681     pci_register_bar(&proxy->pci_dev, 0, size, PCI_BASE_ADDRESS_SPACE_IO,
 682                            virtio_map);
 683
 684     if (!kvm_has_many_ioeventfds()) {
 685         proxy->flags &= ~VIRTIO_PCI_FLAG_USE_IOEVENTFD;
 686     }
 687
 688     virtio_bind_device(vdev, &virtio_pci_bindings, proxy);
 689     proxy->host_features |= 0x1 << VIRTIO_F_NOTIFY_ON_EMPTY;
 690     proxy->host_features |= 0x1 << VIRTIO_F_BAD_FEATURE;
 691     proxy->host_features = vdev->get_features(vdev, proxy->host_features);
 692 }
 693
 694 static int virtio_blk_init_pci(PCIDevice *pci_dev)
 695 {
 696     VirtIOPCIProxy *proxy = DO_UPCAST(VirtIOPCIProxy, pci_dev, pci_dev);
 697     VirtIODevice *vdev;
 698
 699     if (proxy->class_code != PCI_CLASS_STORAGE_SCSI &&
 700         proxy->class_code != PCI_CLASS_STORAGE_OTHER)
 701         proxy->class_code = PCI_CLASS_STORAGE_SCSI;
 702
 703     vdev = virtio_blk_init(&pci_dev->qdev, &proxy->block,
 704                            &proxy->block_serial);
 705     if (!vdev) {
 706         return -1;
 707     }
 708     vdev->nvectors = proxy->nvectors;
 709     virtio_init_pci(proxy, vdev);
 710     /* make the actual value visible */
 711     proxy->nvectors = vdev->nvectors;
 712     return 0;
 713 }
 714
 715 static int virtio_exit_pci(PCIDevice *pci_dev)
 716 {
 717     return msix_uninit(pci_dev);
 718 }
 719
 720 static int virtio_blk_exit_pci(PCIDevice *pci_dev)
 721 {
 722     VirtIOPCIProxy *proxy = DO_UPCAST(VirtIOPCIProxy, pci_dev, pci_dev);
 723
 724     virtio_pci_stop_ioeventfd(proxy);
 725     virtio_blk_exit(proxy->vdev);
 726     blockdev_mark_auto_del(proxy->block.bs);
 727     return virtio_exit_pci(pci_dev);
 728 }
 729
 730 static int virtio_serial_init_pci(PCIDevice *pci_dev)
 731 {
 732     VirtIOPCIProxy *proxy = DO_UPCAST(VirtIOPCIProxy, pci_dev, pci_dev);
 733     VirtIODevice *vdev;
 734
 735     if (proxy->class_code != PCI_CLASS_COMMUNICATION_OTHER &&
 736         proxy->class_code != PCI_CLASS_DISPLAY_OTHER && /* qemu 0.10 */
 737         proxy->class_code != PCI_CLASS_OTHERS)          /* qemu-kvm  */
 738         proxy->class_code = PCI_CLASS_COMMUNICATION_OTHER;
 739
 740     vdev = virtio_serial_init(&pci_dev->qdev, &proxy->serial);
 741     if (!vdev) {
 742         return -1;
 743     }
 744     vdev->nvectors = proxy->nvectors == DEV_NVECTORS_UNSPECIFIED
 745                                         ? proxy->serial.max_virtserial_ports + 1
 746                                         : proxy->nvectors;
 747     virtio_init_pci(proxy, vdev);
 748     proxy->nvectors = vdev->nvectors;
 749     return 0;
 750 }
 751
 752 static int virtio_serial_exit_pci(PCIDevice *pci_dev)
 753 {
 754     VirtIOPCIProxy *proxy = DO_UPCAST(VirtIOPCIProxy, pci_dev, pci_dev);
 755
 756     virtio_pci_stop_ioeventfd(proxy);
 757     virtio_serial_exit(proxy->vdev);
 758     return virtio_exit_pci(pci_dev);
 759 }
 760
 761 static int virtio_net_init_pci(PCIDevice *pci_dev)
 762 {
 763     VirtIOPCIProxy *proxy = DO_UPCAST(VirtIOPCIProxy, pci_dev, pci_dev);
 764     VirtIODevice *vdev;
 765
 766     vdev = virtio_net_init(&pci_dev->qdev, &proxy->nic, &proxy->net);
 767
 768     vdev->nvectors = proxy->nvectors;
 769     virtio_init_pci(proxy, vdev);
 770
 771     /* make the actual value visible */
 772     proxy->nvectors = vdev->nvectors;
 773     return 0;
 774 }
 775
 776 static int virtio_net_exit_pci(PCIDevice *pci_dev)
 777 {
 778     VirtIOPCIProxy *proxy = DO_UPCAST(VirtIOPCIProxy, pci_dev, pci_dev);
 779
 780     virtio_pci_stop_ioeventfd(proxy);
 781     virtio_net_exit(proxy->vdev);
 782     return virtio_exit_pci(pci_dev);
 783 }
 784
 785 static int virtio_balloon_init_pci(PCIDevice *pci_dev)
 786 {
 787     VirtIOPCIProxy *proxy = DO_UPCAST(VirtIOPCIProxy, pci_dev, pci_dev);
 788     VirtIODevice *vdev;
 789
 790     vdev = virtio_balloon_init(&pci_dev->qdev);
 791     virtio_init_pci(proxy, vdev);
 792     return 0;
 793 }
 794
 795 static PCIDeviceInfo virtio_info[] = {
 796     {
 797         .qdev.name = "virtio-blk-pci",
 798         .qdev.alias = "virtio-blk",
 799         .qdev.size = sizeof(VirtIOPCIProxy),
 800         .init      = virtio_blk_init_pci,
 801         .exit      = virtio_blk_exit_pci,
 802         .vendor_id = PCI_VENDOR_ID_REDHAT_QUMRANET,
 803         .device_id = PCI_DEVICE_ID_VIRTIO_BLOCK,
 804         .revision  = VIRTIO_PCI_ABI_VERSION,
 805         .class_id  = PCI_CLASS_STORAGE_SCSI,
 806         .qdev.props = (Property[]) {
 807             DEFINE_PROP_HEX32("class", VirtIOPCIProxy, class_code, 0),
 808             DEFINE_BLOCK_PROPERTIES(VirtIOPCIProxy, block),
 809             DEFINE_PROP_STRING("serial", VirtIOPCIProxy, block_serial),
 810             DEFINE_PROP_BIT("ioeventfd", VirtIOPCIProxy, flags,
 811                             VIRTIO_PCI_FLAG_USE_IOEVENTFD_BIT, true),
 812             DEFINE_PROP_UINT32("vectors", VirtIOPCIProxy, nvectors, 2),
 813             DEFINE_VIRTIO_BLK_FEATURES(VirtIOPCIProxy, host_features),
 814             DEFINE_PROP_END_OF_LIST(),
 815         },
 816         .qdev.reset = virtio_pci_reset,
 817     },{
 818         .qdev.name  = "virtio-net-pci",
 819         .qdev.alias = "virtio-net",
 820         .qdev.size  = sizeof(VirtIOPCIProxy),
 821         .init       = virtio_net_init_pci,
 822         .exit       = virtio_net_exit_pci,
 823         .romfile    = "pxe-virtio.rom",
 824         .vendor_id  = PCI_VENDOR_ID_REDHAT_QUMRANET,
 825         .device_id  = PCI_DEVICE_ID_VIRTIO_NET,
 826         .revision   = VIRTIO_PCI_ABI_VERSION,
 827         .class_id   = PCI_CLASS_NETWORK_ETHERNET,
 828         .qdev.props = (Property[]) {
 829             DEFINE_PROP_BIT("ioeventfd", VirtIOPCIProxy, flags,
 830                             VIRTIO_PCI_FLAG_USE_IOEVENTFD_BIT, false),
 831             DEFINE_PROP_UINT32("vectors", VirtIOPCIProxy, nvectors, 3),
 832             DEFINE_VIRTIO_NET_FEATURES(VirtIOPCIProxy, host_features),
 833             DEFINE_NIC_PROPERTIES(VirtIOPCIProxy, nic),
 834             DEFINE_PROP_UINT32("x-txtimer", VirtIOPCIProxy,
 835                                net.txtimer, TX_TIMER_INTERVAL),
 836             DEFINE_PROP_INT32("x-txburst", VirtIOPCIProxy,
 837                               net.txburst, TX_BURST),
 838             DEFINE_PROP_STRING("tx", VirtIOPCIProxy, net.tx),
 839             DEFINE_PROP_END_OF_LIST(),
 840         },
 841         .qdev.reset = virtio_pci_reset,
 842     },{
 843         .qdev.name = "virtio-serial-pci",
 844         .qdev.alias = "virtio-serial",
 845         .qdev.size = sizeof(VirtIOPCIProxy),
 846         .init      = virtio_serial_init_pci,
 847         .exit      = virtio_serial_exit_pci,
 848         .vendor_id = PCI_VENDOR_ID_REDHAT_QUMRANET,
 849         .device_id = PCI_DEVICE_ID_VIRTIO_CONSOLE,
 850         .revision  = VIRTIO_PCI_ABI_VERSION,
 851         .class_id  = PCI_CLASS_COMMUNICATION_OTHER,
 852         .qdev.props = (Property[]) {
 853             DEFINE_PROP_BIT("ioeventfd", VirtIOPCIProxy, flags,
 854                             VIRTIO_PCI_FLAG_USE_IOEVENTFD_BIT, true),
 855             DEFINE_PROP_UINT32("vectors", VirtIOPCIProxy, nvectors,
 856                                DEV_NVECTORS_UNSPECIFIED),
 857             DEFINE_PROP_HEX32("class", VirtIOPCIProxy, class_code, 0),
 858             DEFINE_VIRTIO_COMMON_FEATURES(VirtIOPCIProxy, host_features),
 859             DEFINE_PROP_UINT32("max_ports", VirtIOPCIProxy,
 860                                serial.max_virtserial_ports, 31),
 861             DEFINE_PROP_END_OF_LIST(),
 862         },
 863         .qdev.reset = virtio_pci_reset,
 864     },{
 865         .qdev.name = "virtio-balloon-pci",
 866         .qdev.alias = "virtio-balloon",
 867         .qdev.size = sizeof(VirtIOPCIProxy),
 868         .init      = virtio_balloon_init_pci,
 869         .exit      = virtio_exit_pci,
 870         .vendor_id = PCI_VENDOR_ID_REDHAT_QUMRANET,
 871         .device_id = PCI_DEVICE_ID_VIRTIO_BALLOON,
 872         .revision  = VIRTIO_PCI_ABI_VERSION,
 873         .class_id  = PCI_CLASS_MEMORY_RAM,
 874         .qdev.props = (Property[]) {
 875             DEFINE_VIRTIO_COMMON_FEATURES(VirtIOPCIProxy, host_features),
 876             DEFINE_PROP_END_OF_LIST(),
 877         },
 878         .qdev.reset = virtio_pci_reset,
 879     },{
 880         /* end of list */
 881     }
 882 };
 883
 884 static void virtio_pci_register_devices(void)
 885 {
 886     pci_qdev_register_many(virtio_info);
 887 }
 888
 889 device_init(virtio_pci_register_devices)