2 * QEMU System Emulator block driver
4 * Copyright (c) 2003 Fabrice Bellard
6 * Permission is hereby granted, free of charge, to any person obtaining a copy
7 * of this software and associated documentation files (the "Software"), to deal
8 * in the Software without restriction, including without limitation the rights
9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10 * copies of the Software, and to permit persons to whom the Software is
11 * furnished to do so, subject to the following conditions:
13 * The above copyright notice and this permission notice shall be included in
14 * all copies or substantial portions of the Software.
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
24 #include "config-host.h"
25 #include "qemu-common.h"
27 #include "monitor/monitor.h"
28 #include "block/block_int.h"
29 #include "block/blockjob.h"
30 #include "qemu/module.h"
31 #include "qapi/qmp/qjson.h"
32 #include "sysemu/sysemu.h"
33 #include "qemu/notify.h"
34 #include "block/coroutine.h"
35 #include "block/qapi.h"
36 #include "qmp-commands.h"
37 #include "qemu/timer.h"
40 #include <sys/types.h>
42 #include <sys/ioctl.h>
43 #include <sys/queue.h>
53 struct BdrvDirtyBitmap
{
55 QLIST_ENTRY(BdrvDirtyBitmap
) list
;
58 #define NOT_DONE 0x7fffffff /* used while emulated sync operation in progress */
60 static void bdrv_dev_change_media_cb(BlockDriverState
*bs
, bool load
);
61 static BlockDriverAIOCB
*bdrv_aio_readv_em(BlockDriverState
*bs
,
62 int64_t sector_num
, QEMUIOVector
*qiov
, int nb_sectors
,
63 BlockDriverCompletionFunc
*cb
, void *opaque
);
64 static BlockDriverAIOCB
*bdrv_aio_writev_em(BlockDriverState
*bs
,
65 int64_t sector_num
, QEMUIOVector
*qiov
, int nb_sectors
,
66 BlockDriverCompletionFunc
*cb
, void *opaque
);
67 static int coroutine_fn
bdrv_co_readv_em(BlockDriverState
*bs
,
68 int64_t sector_num
, int nb_sectors
,
70 static int coroutine_fn
bdrv_co_writev_em(BlockDriverState
*bs
,
71 int64_t sector_num
, int nb_sectors
,
73 static int coroutine_fn
bdrv_co_do_preadv(BlockDriverState
*bs
,
74 int64_t offset
, unsigned int bytes
, QEMUIOVector
*qiov
,
75 BdrvRequestFlags flags
);
76 static int coroutine_fn
bdrv_co_do_pwritev(BlockDriverState
*bs
,
77 int64_t offset
, unsigned int bytes
, QEMUIOVector
*qiov
,
78 BdrvRequestFlags flags
);
79 static BlockDriverAIOCB
*bdrv_co_aio_rw_vector(BlockDriverState
*bs
,
83 BdrvRequestFlags flags
,
84 BlockDriverCompletionFunc
*cb
,
87 static void coroutine_fn
bdrv_co_do_rw(void *opaque
);
88 static int coroutine_fn
bdrv_co_do_write_zeroes(BlockDriverState
*bs
,
89 int64_t sector_num
, int nb_sectors
, BdrvRequestFlags flags
);
91 static QTAILQ_HEAD(, BlockDriverState
) bdrv_states
=
92 QTAILQ_HEAD_INITIALIZER(bdrv_states
);
94 static QTAILQ_HEAD(, BlockDriverState
) graph_bdrv_states
=
95 QTAILQ_HEAD_INITIALIZER(graph_bdrv_states
);
97 static QLIST_HEAD(, BlockDriver
) bdrv_drivers
=
98 QLIST_HEAD_INITIALIZER(bdrv_drivers
);
100 /* If non-zero, use only whitelisted block drivers */
101 static int use_bdrv_whitelist
;
104 static int is_windows_drive_prefix(const char *filename
)
106 return (((filename
[0] >= 'a' && filename
[0] <= 'z') ||
107 (filename
[0] >= 'A' && filename
[0] <= 'Z')) &&
111 int is_windows_drive(const char *filename
)
113 if (is_windows_drive_prefix(filename
) &&
116 if (strstart(filename
, "\\\\.\\", NULL
) ||
117 strstart(filename
, "//./", NULL
))
123 /* throttling disk I/O limits */
124 void bdrv_set_io_limits(BlockDriverState
*bs
,
129 throttle_config(&bs
->throttle_state
, cfg
);
131 for (i
= 0; i
< 2; i
++) {
132 qemu_co_enter_next(&bs
->throttled_reqs
[i
]);
136 /* this function drain all the throttled IOs */
137 static bool bdrv_start_throttled_reqs(BlockDriverState
*bs
)
139 bool drained
= false;
140 bool enabled
= bs
->io_limits_enabled
;
143 bs
->io_limits_enabled
= false;
145 for (i
= 0; i
< 2; i
++) {
146 while (qemu_co_enter_next(&bs
->throttled_reqs
[i
])) {
151 bs
->io_limits_enabled
= enabled
;
156 void bdrv_io_limits_disable(BlockDriverState
*bs
)
158 bs
->io_limits_enabled
= false;
160 bdrv_start_throttled_reqs(bs
);
162 throttle_destroy(&bs
->throttle_state
);
165 static void bdrv_throttle_read_timer_cb(void *opaque
)
167 BlockDriverState
*bs
= opaque
;
168 qemu_co_enter_next(&bs
->throttled_reqs
[0]);
171 static void bdrv_throttle_write_timer_cb(void *opaque
)
173 BlockDriverState
*bs
= opaque
;
174 qemu_co_enter_next(&bs
->throttled_reqs
[1]);
177 /* should be called before bdrv_set_io_limits if a limit is set */
178 void bdrv_io_limits_enable(BlockDriverState
*bs
)
180 assert(!bs
->io_limits_enabled
);
181 throttle_init(&bs
->throttle_state
,
182 bdrv_get_aio_context(bs
),
184 bdrv_throttle_read_timer_cb
,
185 bdrv_throttle_write_timer_cb
,
187 bs
->io_limits_enabled
= true;
190 /* This function makes an IO wait if needed
192 * @nb_sectors: the number of sectors of the IO
193 * @is_write: is the IO a write
195 static void bdrv_io_limits_intercept(BlockDriverState
*bs
,
199 /* does this io must wait */
200 bool must_wait
= throttle_schedule_timer(&bs
->throttle_state
, is_write
);
202 /* if must wait or any request of this type throttled queue the IO */
204 !qemu_co_queue_empty(&bs
->throttled_reqs
[is_write
])) {
205 qemu_co_queue_wait(&bs
->throttled_reqs
[is_write
]);
208 /* the IO will be executed, do the accounting */
209 throttle_account(&bs
->throttle_state
, is_write
, bytes
);
212 /* if the next request must wait -> do nothing */
213 if (throttle_schedule_timer(&bs
->throttle_state
, is_write
)) {
217 /* else queue next request for execution */
218 qemu_co_queue_next(&bs
->throttled_reqs
[is_write
]);
221 size_t bdrv_opt_mem_align(BlockDriverState
*bs
)
223 if (!bs
|| !bs
->drv
) {
224 /* 4k should be on the safe side */
228 return bs
->bl
.opt_mem_alignment
;
231 /* check if the path starts with "<protocol>:" */
232 static int path_has_protocol(const char *path
)
237 if (is_windows_drive(path
) ||
238 is_windows_drive_prefix(path
)) {
241 p
= path
+ strcspn(path
, ":/\\");
243 p
= path
+ strcspn(path
, ":/");
249 int path_is_absolute(const char *path
)
252 /* specific case for names like: "\\.\d:" */
253 if (is_windows_drive(path
) || is_windows_drive_prefix(path
)) {
256 return (*path
== '/' || *path
== '\\');
258 return (*path
== '/');
262 /* if filename is absolute, just copy it to dest. Otherwise, build a
263 path to it by considering it is relative to base_path. URL are
265 void path_combine(char *dest
, int dest_size
,
266 const char *base_path
,
267 const char *filename
)
274 if (path_is_absolute(filename
)) {
275 pstrcpy(dest
, dest_size
, filename
);
277 p
= strchr(base_path
, ':');
282 p1
= strrchr(base_path
, '/');
286 p2
= strrchr(base_path
, '\\');
298 if (len
> dest_size
- 1)
300 memcpy(dest
, base_path
, len
);
302 pstrcat(dest
, dest_size
, filename
);
306 void bdrv_get_full_backing_filename(BlockDriverState
*bs
, char *dest
, size_t sz
)
308 if (bs
->backing_file
[0] == '\0' || path_has_protocol(bs
->backing_file
)) {
309 pstrcpy(dest
, sz
, bs
->backing_file
);
311 path_combine(dest
, sz
, bs
->filename
, bs
->backing_file
);
315 void bdrv_register(BlockDriver
*bdrv
)
317 /* Block drivers without coroutine functions need emulation */
318 if (!bdrv
->bdrv_co_readv
) {
319 bdrv
->bdrv_co_readv
= bdrv_co_readv_em
;
320 bdrv
->bdrv_co_writev
= bdrv_co_writev_em
;
322 /* bdrv_co_readv_em()/brdv_co_writev_em() work in terms of aio, so if
323 * the block driver lacks aio we need to emulate that too.
325 if (!bdrv
->bdrv_aio_readv
) {
326 /* add AIO emulation layer */
327 bdrv
->bdrv_aio_readv
= bdrv_aio_readv_em
;
328 bdrv
->bdrv_aio_writev
= bdrv_aio_writev_em
;
332 QLIST_INSERT_HEAD(&bdrv_drivers
, bdrv
, list
);
335 /* create a new block device (by default it is empty) */
336 BlockDriverState
*bdrv_new(const char *device_name
, Error
**errp
)
338 BlockDriverState
*bs
;
341 if (bdrv_find(device_name
)) {
342 error_setg(errp
, "Device with id '%s' already exists",
346 if (bdrv_find_node(device_name
)) {
347 error_setg(errp
, "Device with node-name '%s' already exists",
352 bs
= g_malloc0(sizeof(BlockDriverState
));
353 QLIST_INIT(&bs
->dirty_bitmaps
);
354 pstrcpy(bs
->device_name
, sizeof(bs
->device_name
), device_name
);
355 if (device_name
[0] != '\0') {
356 QTAILQ_INSERT_TAIL(&bdrv_states
, bs
, device_list
);
358 for (i
= 0; i
< BLOCK_OP_TYPE_MAX
; i
++) {
359 QLIST_INIT(&bs
->op_blockers
[i
]);
361 bdrv_iostatus_disable(bs
);
362 notifier_list_init(&bs
->close_notifiers
);
363 notifier_with_return_list_init(&bs
->before_write_notifiers
);
364 qemu_co_queue_init(&bs
->throttled_reqs
[0]);
365 qemu_co_queue_init(&bs
->throttled_reqs
[1]);
367 bs
->aio_context
= qemu_get_aio_context();
372 void bdrv_add_close_notifier(BlockDriverState
*bs
, Notifier
*notify
)
374 notifier_list_add(&bs
->close_notifiers
, notify
);
377 BlockDriver
*bdrv_find_format(const char *format_name
)
380 QLIST_FOREACH(drv1
, &bdrv_drivers
, list
) {
381 if (!strcmp(drv1
->format_name
, format_name
)) {
388 static int bdrv_is_whitelisted(BlockDriver
*drv
, bool read_only
)
390 static const char *whitelist_rw
[] = {
391 CONFIG_BDRV_RW_WHITELIST
393 static const char *whitelist_ro
[] = {
394 CONFIG_BDRV_RO_WHITELIST
398 if (!whitelist_rw
[0] && !whitelist_ro
[0]) {
399 return 1; /* no whitelist, anything goes */
402 for (p
= whitelist_rw
; *p
; p
++) {
403 if (!strcmp(drv
->format_name
, *p
)) {
408 for (p
= whitelist_ro
; *p
; p
++) {
409 if (!strcmp(drv
->format_name
, *p
)) {
417 BlockDriver
*bdrv_find_whitelisted_format(const char *format_name
,
420 BlockDriver
*drv
= bdrv_find_format(format_name
);
421 return drv
&& bdrv_is_whitelisted(drv
, read_only
) ? drv
: NULL
;
424 typedef struct CreateCo
{
432 static void coroutine_fn
bdrv_create_co_entry(void *opaque
)
434 Error
*local_err
= NULL
;
437 CreateCo
*cco
= opaque
;
440 ret
= cco
->drv
->bdrv_create(cco
->filename
, cco
->opts
, &local_err
);
442 error_propagate(&cco
->err
, local_err
);
447 int bdrv_create(BlockDriver
*drv
, const char* filename
,
448 QemuOpts
*opts
, Error
**errp
)
455 .filename
= g_strdup(filename
),
461 if (!drv
->bdrv_create
) {
462 error_setg(errp
, "Driver '%s' does not support image creation", drv
->format_name
);
467 if (qemu_in_coroutine()) {
468 /* Fast-path if already in coroutine context */
469 bdrv_create_co_entry(&cco
);
471 co
= qemu_coroutine_create(bdrv_create_co_entry
);
472 qemu_coroutine_enter(co
, &cco
);
473 while (cco
.ret
== NOT_DONE
) {
481 error_propagate(errp
, cco
.err
);
483 error_setg_errno(errp
, -ret
, "Could not create image");
488 g_free(cco
.filename
);
492 int bdrv_create_file(const char *filename
, QemuOpts
*opts
, Error
**errp
)
495 Error
*local_err
= NULL
;
498 drv
= bdrv_find_protocol(filename
, true);
500 error_setg(errp
, "Could not find protocol for file '%s'", filename
);
504 ret
= bdrv_create(drv
, filename
, opts
, &local_err
);
506 error_propagate(errp
, local_err
);
511 int bdrv_refresh_limits(BlockDriverState
*bs
)
513 BlockDriver
*drv
= bs
->drv
;
515 memset(&bs
->bl
, 0, sizeof(bs
->bl
));
521 /* Take some limits from the children as a default */
523 bdrv_refresh_limits(bs
->file
);
524 bs
->bl
.opt_transfer_length
= bs
->file
->bl
.opt_transfer_length
;
525 bs
->bl
.opt_mem_alignment
= bs
->file
->bl
.opt_mem_alignment
;
527 bs
->bl
.opt_mem_alignment
= 512;
530 if (bs
->backing_hd
) {
531 bdrv_refresh_limits(bs
->backing_hd
);
532 bs
->bl
.opt_transfer_length
=
533 MAX(bs
->bl
.opt_transfer_length
,
534 bs
->backing_hd
->bl
.opt_transfer_length
);
535 bs
->bl
.opt_mem_alignment
=
536 MAX(bs
->bl
.opt_mem_alignment
,
537 bs
->backing_hd
->bl
.opt_mem_alignment
);
540 /* Then let the driver override it */
541 if (drv
->bdrv_refresh_limits
) {
542 return drv
->bdrv_refresh_limits(bs
);
549 * Create a uniquely-named empty temporary file.
550 * Return 0 upon success, otherwise a negative errno value.
552 int get_tmp_filename(char *filename
, int size
)
555 char temp_dir
[MAX_PATH
];
556 /* GetTempFileName requires that its output buffer (4th param)
557 have length MAX_PATH or greater. */
558 assert(size
>= MAX_PATH
);
559 return (GetTempPath(MAX_PATH
, temp_dir
)
560 && GetTempFileName(temp_dir
, "qem", 0, filename
)
561 ? 0 : -GetLastError());
565 tmpdir
= getenv("TMPDIR");
569 if (snprintf(filename
, size
, "%s/vl.XXXXXX", tmpdir
) >= size
) {
572 fd
= mkstemp(filename
);
576 if (close(fd
) != 0) {
585 * Detect host devices. By convention, /dev/cdrom[N] is always
586 * recognized as a host CDROM.
588 static BlockDriver
*find_hdev_driver(const char *filename
)
590 int score_max
= 0, score
;
591 BlockDriver
*drv
= NULL
, *d
;
593 QLIST_FOREACH(d
, &bdrv_drivers
, list
) {
594 if (d
->bdrv_probe_device
) {
595 score
= d
->bdrv_probe_device(filename
);
596 if (score
> score_max
) {
606 BlockDriver
*bdrv_find_protocol(const char *filename
,
607 bool allow_protocol_prefix
)
614 /* TODO Drivers without bdrv_file_open must be specified explicitly */
617 * XXX(hch): we really should not let host device detection
618 * override an explicit protocol specification, but moving this
619 * later breaks access to device names with colons in them.
620 * Thanks to the brain-dead persistent naming schemes on udev-
621 * based Linux systems those actually are quite common.
623 drv1
= find_hdev_driver(filename
);
628 if (!path_has_protocol(filename
) || !allow_protocol_prefix
) {
629 return bdrv_find_format("file");
632 p
= strchr(filename
, ':');
635 if (len
> sizeof(protocol
) - 1)
636 len
= sizeof(protocol
) - 1;
637 memcpy(protocol
, filename
, len
);
638 protocol
[len
] = '\0';
639 QLIST_FOREACH(drv1
, &bdrv_drivers
, list
) {
640 if (drv1
->protocol_name
&&
641 !strcmp(drv1
->protocol_name
, protocol
)) {
648 static int find_image_format(BlockDriverState
*bs
, const char *filename
,
649 BlockDriver
**pdrv
, Error
**errp
)
651 int score
, score_max
;
652 BlockDriver
*drv1
, *drv
;
656 /* Return the raw BlockDriver * to scsi-generic devices or empty drives */
657 if (bs
->sg
|| !bdrv_is_inserted(bs
) || bdrv_getlength(bs
) == 0) {
658 drv
= bdrv_find_format("raw");
660 error_setg(errp
, "Could not find raw image format");
667 ret
= bdrv_pread(bs
, 0, buf
, sizeof(buf
));
669 error_setg_errno(errp
, -ret
, "Could not read image for determining its "
677 QLIST_FOREACH(drv1
, &bdrv_drivers
, list
) {
678 if (drv1
->bdrv_probe
) {
679 score
= drv1
->bdrv_probe(buf
, ret
, filename
);
680 if (score
> score_max
) {
687 error_setg(errp
, "Could not determine image format: No compatible "
696 * Set the current 'total_sectors' value
698 static int refresh_total_sectors(BlockDriverState
*bs
, int64_t hint
)
700 BlockDriver
*drv
= bs
->drv
;
702 /* Do not attempt drv->bdrv_getlength() on scsi-generic devices */
706 /* query actual device if possible, otherwise just trust the hint */
707 if (drv
->bdrv_getlength
) {
708 int64_t length
= drv
->bdrv_getlength(bs
);
712 hint
= DIV_ROUND_UP(length
, BDRV_SECTOR_SIZE
);
715 bs
->total_sectors
= hint
;
720 * Set open flags for a given discard mode
722 * Return 0 on success, -1 if the discard mode was invalid.
724 int bdrv_parse_discard_flags(const char *mode
, int *flags
)
726 *flags
&= ~BDRV_O_UNMAP
;
728 if (!strcmp(mode
, "off") || !strcmp(mode
, "ignore")) {
730 } else if (!strcmp(mode
, "on") || !strcmp(mode
, "unmap")) {
731 *flags
|= BDRV_O_UNMAP
;
740 * Set open flags for a given cache mode
742 * Return 0 on success, -1 if the cache mode was invalid.
744 int bdrv_parse_cache_flags(const char *mode
, int *flags
)
746 *flags
&= ~BDRV_O_CACHE_MASK
;
748 if (!strcmp(mode
, "off") || !strcmp(mode
, "none")) {
749 *flags
|= BDRV_O_NOCACHE
| BDRV_O_CACHE_WB
;
750 } else if (!strcmp(mode
, "directsync")) {
751 *flags
|= BDRV_O_NOCACHE
;
752 } else if (!strcmp(mode
, "writeback")) {
753 *flags
|= BDRV_O_CACHE_WB
;
754 } else if (!strcmp(mode
, "unsafe")) {
755 *flags
|= BDRV_O_CACHE_WB
;
756 *flags
|= BDRV_O_NO_FLUSH
;
757 } else if (!strcmp(mode
, "writethrough")) {
758 /* this is the default */
767 * The copy-on-read flag is actually a reference count so multiple users may
768 * use the feature without worrying about clobbering its previous state.
769 * Copy-on-read stays enabled until all users have called to disable it.
771 void bdrv_enable_copy_on_read(BlockDriverState
*bs
)
776 void bdrv_disable_copy_on_read(BlockDriverState
*bs
)
778 assert(bs
->copy_on_read
> 0);
783 * Returns the flags that a temporary snapshot should get, based on the
784 * originally requested flags (the originally requested image will have flags
785 * like a backing file)
787 static int bdrv_temp_snapshot_flags(int flags
)
789 return (flags
& ~BDRV_O_SNAPSHOT
) | BDRV_O_TEMPORARY
;
793 * Returns the flags that bs->file should get, based on the given flags for
796 static int bdrv_inherited_flags(int flags
)
798 /* Enable protocol handling, disable format probing for bs->file */
799 flags
|= BDRV_O_PROTOCOL
;
801 /* Our block drivers take care to send flushes and respect unmap policy,
802 * so we can enable both unconditionally on lower layers. */
803 flags
|= BDRV_O_CACHE_WB
| BDRV_O_UNMAP
;
805 /* Clear flags that only apply to the top layer */
806 flags
&= ~(BDRV_O_SNAPSHOT
| BDRV_O_NO_BACKING
| BDRV_O_COPY_ON_READ
);
812 * Returns the flags that bs->backing_hd should get, based on the given flags
815 static int bdrv_backing_flags(int flags
)
817 /* backing files always opened read-only */
818 flags
&= ~(BDRV_O_RDWR
| BDRV_O_COPY_ON_READ
);
820 /* snapshot=on is handled on the top layer */
821 flags
&= ~(BDRV_O_SNAPSHOT
| BDRV_O_TEMPORARY
);
826 static int bdrv_open_flags(BlockDriverState
*bs
, int flags
)
828 int open_flags
= flags
| BDRV_O_CACHE_WB
;
831 * Clear flags that are internal to the block layer before opening the
834 open_flags
&= ~(BDRV_O_SNAPSHOT
| BDRV_O_NO_BACKING
);
837 * Snapshots should be writable.
839 if (flags
& BDRV_O_TEMPORARY
) {
840 open_flags
|= BDRV_O_RDWR
;
846 static void bdrv_assign_node_name(BlockDriverState
*bs
,
847 const char *node_name
,
854 /* empty string node name is invalid */
855 if (node_name
[0] == '\0') {
856 error_setg(errp
, "Empty node name");
860 /* takes care of avoiding namespaces collisions */
861 if (bdrv_find(node_name
)) {
862 error_setg(errp
, "node-name=%s is conflicting with a device id",
867 /* takes care of avoiding duplicates node names */
868 if (bdrv_find_node(node_name
)) {
869 error_setg(errp
, "Duplicate node name");
873 /* copy node name into the bs and insert it into the graph list */
874 pstrcpy(bs
->node_name
, sizeof(bs
->node_name
), node_name
);
875 QTAILQ_INSERT_TAIL(&graph_bdrv_states
, bs
, node_list
);
879 * Common part for opening disk images and files
881 * Removes all processed options from *options.
883 static int bdrv_open_common(BlockDriverState
*bs
, BlockDriverState
*file
,
884 QDict
*options
, int flags
, BlockDriver
*drv
, Error
**errp
)
887 const char *filename
;
888 const char *node_name
= NULL
;
889 Error
*local_err
= NULL
;
892 assert(bs
->file
== NULL
);
893 assert(options
!= NULL
&& bs
->options
!= options
);
896 filename
= file
->filename
;
898 filename
= qdict_get_try_str(options
, "filename");
901 if (drv
->bdrv_needs_filename
&& !filename
) {
902 error_setg(errp
, "The '%s' block driver requires a file name",
907 trace_bdrv_open_common(bs
, filename
?: "", flags
, drv
->format_name
);
909 node_name
= qdict_get_try_str(options
, "node-name");
910 bdrv_assign_node_name(bs
, node_name
, &local_err
);
912 error_propagate(errp
, local_err
);
915 qdict_del(options
, "node-name");
917 /* bdrv_open() with directly using a protocol as drv. This layer is already
918 * opened, so assign it to bs (while file becomes a closed BlockDriverState)
919 * and return immediately. */
920 if (file
!= NULL
&& drv
->bdrv_file_open
) {
925 bs
->open_flags
= flags
;
926 bs
->guest_block_size
= 512;
927 bs
->request_alignment
= 512;
928 bs
->zero_beyond_eof
= true;
929 open_flags
= bdrv_open_flags(bs
, flags
);
930 bs
->read_only
= !(open_flags
& BDRV_O_RDWR
);
932 if (use_bdrv_whitelist
&& !bdrv_is_whitelisted(drv
, bs
->read_only
)) {
934 !bs
->read_only
&& bdrv_is_whitelisted(drv
, true)
935 ? "Driver '%s' can only be used for read-only devices"
936 : "Driver '%s' is not whitelisted",
941 assert(bs
->copy_on_read
== 0); /* bdrv_new() and bdrv_close() make it so */
942 if (flags
& BDRV_O_COPY_ON_READ
) {
943 if (!bs
->read_only
) {
944 bdrv_enable_copy_on_read(bs
);
946 error_setg(errp
, "Can't use copy-on-read on read-only device");
951 if (filename
!= NULL
) {
952 pstrcpy(bs
->filename
, sizeof(bs
->filename
), filename
);
954 bs
->filename
[0] = '\0';
958 bs
->opaque
= g_malloc0(drv
->instance_size
);
960 bs
->enable_write_cache
= !!(flags
& BDRV_O_CACHE_WB
);
962 /* Open the image, either directly or using a protocol */
963 if (drv
->bdrv_file_open
) {
964 assert(file
== NULL
);
965 assert(!drv
->bdrv_needs_filename
|| filename
!= NULL
);
966 ret
= drv
->bdrv_file_open(bs
, options
, open_flags
, &local_err
);
969 error_setg(errp
, "Can't use '%s' as a block driver for the "
970 "protocol level", drv
->format_name
);
975 ret
= drv
->bdrv_open(bs
, options
, open_flags
, &local_err
);
980 error_propagate(errp
, local_err
);
981 } else if (bs
->filename
[0]) {
982 error_setg_errno(errp
, -ret
, "Could not open '%s'", bs
->filename
);
984 error_setg_errno(errp
, -ret
, "Could not open image");
989 ret
= refresh_total_sectors(bs
, bs
->total_sectors
);
991 error_setg_errno(errp
, -ret
, "Could not refresh total sector count");
995 bdrv_refresh_limits(bs
);
996 assert(bdrv_opt_mem_align(bs
) != 0);
997 assert((bs
->request_alignment
!= 0) || bs
->sg
);
1009 * Opens a file using a protocol (file, host_device, nbd, ...)
1011 * options is an indirect pointer to a QDict of options to pass to the block
1012 * drivers, or pointer to NULL for an empty set of options. If this function
1013 * takes ownership of the QDict reference, it will set *options to NULL;
1014 * otherwise, it will contain unused/unrecognized options after this function
1015 * returns. Then, the caller is responsible for freeing it. If it intends to
1016 * reuse the QDict, QINCREF() should be called beforehand.
1018 static int bdrv_file_open(BlockDriverState
*bs
, const char *filename
,
1019 QDict
**options
, int flags
, Error
**errp
)
1022 const char *drvname
;
1023 bool parse_filename
= false;
1024 Error
*local_err
= NULL
;
1027 /* Fetch the file name from the options QDict if necessary */
1029 filename
= qdict_get_try_str(*options
, "filename");
1030 } else if (filename
&& !qdict_haskey(*options
, "filename")) {
1031 qdict_put(*options
, "filename", qstring_from_str(filename
));
1032 parse_filename
= true;
1034 error_setg(errp
, "Can't specify 'file' and 'filename' options at the "
1040 /* Find the right block driver */
1041 drvname
= qdict_get_try_str(*options
, "driver");
1043 drv
= bdrv_find_format(drvname
);
1045 error_setg(errp
, "Unknown driver '%s'", drvname
);
1047 qdict_del(*options
, "driver");
1048 } else if (filename
) {
1049 drv
= bdrv_find_protocol(filename
, parse_filename
);
1051 error_setg(errp
, "Unknown protocol");
1054 error_setg(errp
, "Must specify either driver or file");
1059 /* errp has been set already */
1064 /* Parse the filename and open it */
1065 if (drv
->bdrv_parse_filename
&& parse_filename
) {
1066 drv
->bdrv_parse_filename(filename
, *options
, &local_err
);
1068 error_propagate(errp
, local_err
);
1073 if (!drv
->bdrv_needs_filename
) {
1074 qdict_del(*options
, "filename");
1076 filename
= qdict_get_str(*options
, "filename");
1080 if (!drv
->bdrv_file_open
) {
1081 ret
= bdrv_open(&bs
, filename
, NULL
, *options
, flags
, drv
, &local_err
);
1084 ret
= bdrv_open_common(bs
, NULL
, *options
, flags
, drv
, &local_err
);
1087 error_propagate(errp
, local_err
);
1098 void bdrv_set_backing_hd(BlockDriverState
*bs
, BlockDriverState
*backing_hd
)
1101 if (bs
->backing_hd
) {
1102 assert(bs
->backing_blocker
);
1103 bdrv_op_unblock_all(bs
->backing_hd
, bs
->backing_blocker
);
1104 } else if (backing_hd
) {
1105 error_setg(&bs
->backing_blocker
,
1106 "device is used as backing hd of '%s'",
1110 bs
->backing_hd
= backing_hd
;
1112 error_free(bs
->backing_blocker
);
1113 bs
->backing_blocker
= NULL
;
1116 bs
->open_flags
&= ~BDRV_O_NO_BACKING
;
1117 pstrcpy(bs
->backing_file
, sizeof(bs
->backing_file
), backing_hd
->filename
);
1118 pstrcpy(bs
->backing_format
, sizeof(bs
->backing_format
),
1119 backing_hd
->drv
? backing_hd
->drv
->format_name
: "");
1121 bdrv_op_block_all(bs
->backing_hd
, bs
->backing_blocker
);
1122 /* Otherwise we won't be able to commit due to check in bdrv_commit */
1123 bdrv_op_unblock(bs
->backing_hd
, BLOCK_OP_TYPE_COMMIT
,
1124 bs
->backing_blocker
);
1126 bdrv_refresh_limits(bs
);
1130 * Opens the backing file for a BlockDriverState if not yet open
1132 * options is a QDict of options to pass to the block drivers, or NULL for an
1133 * empty set of options. The reference to the QDict is transferred to this
1134 * function (even on failure), so if the caller intends to reuse the dictionary,
1135 * it needs to use QINCREF() before calling bdrv_file_open.
1137 int bdrv_open_backing_file(BlockDriverState
*bs
, QDict
*options
, Error
**errp
)
1139 char *backing_filename
= g_malloc0(PATH_MAX
);
1141 BlockDriver
*back_drv
= NULL
;
1142 BlockDriverState
*backing_hd
;
1143 Error
*local_err
= NULL
;
1145 if (bs
->backing_hd
!= NULL
) {
1150 /* NULL means an empty set of options */
1151 if (options
== NULL
) {
1152 options
= qdict_new();
1155 bs
->open_flags
&= ~BDRV_O_NO_BACKING
;
1156 if (qdict_haskey(options
, "file.filename")) {
1157 backing_filename
[0] = '\0';
1158 } else if (bs
->backing_file
[0] == '\0' && qdict_size(options
) == 0) {
1162 bdrv_get_full_backing_filename(bs
, backing_filename
, PATH_MAX
);
1165 backing_hd
= bdrv_new("", errp
);
1167 if (bs
->backing_format
[0] != '\0') {
1168 back_drv
= bdrv_find_format(bs
->backing_format
);
1171 assert(bs
->backing_hd
== NULL
);
1172 ret
= bdrv_open(&backing_hd
,
1173 *backing_filename
? backing_filename
: NULL
, NULL
, options
,
1174 bdrv_backing_flags(bs
->open_flags
), back_drv
, &local_err
);
1176 bdrv_unref(backing_hd
);
1178 bs
->open_flags
|= BDRV_O_NO_BACKING
;
1179 error_setg(errp
, "Could not open backing file: %s",
1180 error_get_pretty(local_err
));
1181 error_free(local_err
);
1184 bdrv_set_backing_hd(bs
, backing_hd
);
1187 g_free(backing_filename
);
1192 * Opens a disk image whose options are given as BlockdevRef in another block
1195 * If allow_none is true, no image will be opened if filename is false and no
1196 * BlockdevRef is given. *pbs will remain unchanged and 0 will be returned.
1198 * bdrev_key specifies the key for the image's BlockdevRef in the options QDict.
1199 * That QDict has to be flattened; therefore, if the BlockdevRef is a QDict
1200 * itself, all options starting with "${bdref_key}." are considered part of the
1203 * The BlockdevRef will be removed from the options QDict.
1205 * To conform with the behavior of bdrv_open(), *pbs has to be NULL.
1207 int bdrv_open_image(BlockDriverState
**pbs
, const char *filename
,
1208 QDict
*options
, const char *bdref_key
, int flags
,
1209 bool allow_none
, Error
**errp
)
1211 QDict
*image_options
;
1213 char *bdref_key_dot
;
1214 const char *reference
;
1217 assert(*pbs
== NULL
);
1219 bdref_key_dot
= g_strdup_printf("%s.", bdref_key
);
1220 qdict_extract_subqdict(options
, &image_options
, bdref_key_dot
);
1221 g_free(bdref_key_dot
);
1223 reference
= qdict_get_try_str(options
, bdref_key
);
1224 if (!filename
&& !reference
&& !qdict_size(image_options
)) {
1228 error_setg(errp
, "A block device must be specified for \"%s\"",
1232 QDECREF(image_options
);
1236 ret
= bdrv_open(pbs
, filename
, reference
, image_options
, flags
, NULL
, errp
);
1239 qdict_del(options
, bdref_key
);
1243 void bdrv_append_temp_snapshot(BlockDriverState
*bs
, int flags
, Error
**errp
)
1245 /* TODO: extra byte is a hack to ensure MAX_PATH space on Windows. */
1246 char *tmp_filename
= g_malloc0(PATH_MAX
+ 1);
1248 BlockDriver
*bdrv_qcow2
;
1249 QemuOpts
*opts
= NULL
;
1250 QDict
*snapshot_options
;
1251 BlockDriverState
*bs_snapshot
;
1255 /* if snapshot, we create a temporary backing file and open it
1256 instead of opening 'filename' directly */
1258 /* Get the required size from the image */
1259 total_size
= bdrv_getlength(bs
);
1260 if (total_size
< 0) {
1261 error_setg_errno(errp
, -total_size
, "Could not get image size");
1264 total_size
&= BDRV_SECTOR_MASK
;
1266 /* Create the temporary image */
1267 ret
= get_tmp_filename(tmp_filename
, PATH_MAX
+ 1);
1269 error_setg_errno(errp
, -ret
, "Could not get temporary filename");
1273 bdrv_qcow2
= bdrv_find_format("qcow2");
1274 opts
= qemu_opts_create(bdrv_qcow2
->create_opts
, NULL
, 0,
1276 qemu_opt_set_number(opts
, BLOCK_OPT_SIZE
, total_size
);
1277 ret
= bdrv_create(bdrv_qcow2
, tmp_filename
, opts
, &local_err
);
1278 qemu_opts_del(opts
);
1280 error_setg_errno(errp
, -ret
, "Could not create temporary overlay "
1281 "'%s': %s", tmp_filename
,
1282 error_get_pretty(local_err
));
1283 error_free(local_err
);
1287 /* Prepare a new options QDict for the temporary file */
1288 snapshot_options
= qdict_new();
1289 qdict_put(snapshot_options
, "file.driver",
1290 qstring_from_str("file"));
1291 qdict_put(snapshot_options
, "file.filename",
1292 qstring_from_str(tmp_filename
));
1294 bs_snapshot
= bdrv_new("", &error_abort
);
1296 ret
= bdrv_open(&bs_snapshot
, NULL
, NULL
, snapshot_options
,
1297 flags
, bdrv_qcow2
, &local_err
);
1299 error_propagate(errp
, local_err
);
1303 bdrv_append(bs_snapshot
, bs
);
1306 g_free(tmp_filename
);
1309 static QDict
*parse_json_filename(const char *filename
, Error
**errp
)
1311 QObject
*options_obj
;
1315 ret
= strstart(filename
, "json:", &filename
);
1318 options_obj
= qobject_from_json(filename
);
1320 error_setg(errp
, "Could not parse the JSON options");
1324 if (qobject_type(options_obj
) != QTYPE_QDICT
) {
1325 qobject_decref(options_obj
);
1326 error_setg(errp
, "Invalid JSON object given");
1330 options
= qobject_to_qdict(options_obj
);
1331 qdict_flatten(options
);
1337 * Opens a disk image (raw, qcow2, vmdk, ...)
1339 * options is a QDict of options to pass to the block drivers, or NULL for an
1340 * empty set of options. The reference to the QDict belongs to the block layer
1341 * after the call (even on failure), so if the caller intends to reuse the
1342 * dictionary, it needs to use QINCREF() before calling bdrv_open.
1344 * If *pbs is NULL, a new BDS will be created with a pointer to it stored there.
1345 * If it is not NULL, the referenced BDS will be reused.
1347 * The reference parameter may be used to specify an existing block device which
1348 * should be opened. If specified, neither options nor a filename may be given,
1349 * nor can an existing BDS be reused (that is, *pbs has to be NULL).
1351 int bdrv_open(BlockDriverState
**pbs
, const char *filename
,
1352 const char *reference
, QDict
*options
, int flags
,
1353 BlockDriver
*drv
, Error
**errp
)
1356 BlockDriverState
*file
= NULL
, *bs
;
1357 const char *drvname
;
1358 Error
*local_err
= NULL
;
1359 int snapshot_flags
= 0;
1364 bool options_non_empty
= options
? qdict_size(options
) : false;
1368 error_setg(errp
, "Cannot reuse an existing BDS when referencing "
1369 "another block device");
1373 if (filename
|| options_non_empty
) {
1374 error_setg(errp
, "Cannot reference an existing block device with "
1375 "additional options or a new filename");
1379 bs
= bdrv_lookup_bs(reference
, reference
, errp
);
1391 bs
= bdrv_new("", &error_abort
);
1394 /* NULL means an empty set of options */
1395 if (options
== NULL
) {
1396 options
= qdict_new();
1399 if (filename
&& g_str_has_prefix(filename
, "json:")) {
1400 QDict
*json_options
= parse_json_filename(filename
, &local_err
);
1406 /* Options given in the filename have lower priority than options
1407 * specified directly */
1408 qdict_join(options
, json_options
, false);
1409 QDECREF(json_options
);
1413 bs
->options
= options
;
1414 options
= qdict_clone_shallow(options
);
1416 if (flags
& BDRV_O_PROTOCOL
) {
1418 ret
= bdrv_file_open(bs
, filename
, &options
, flags
& ~BDRV_O_PROTOCOL
,
1423 } else if (bs
->drv
) {
1424 goto close_and_fail
;
1430 /* Open image file without format layer */
1431 if (flags
& BDRV_O_RDWR
) {
1432 flags
|= BDRV_O_ALLOW_RDWR
;
1434 if (flags
& BDRV_O_SNAPSHOT
) {
1435 snapshot_flags
= bdrv_temp_snapshot_flags(flags
);
1436 flags
= bdrv_backing_flags(flags
);
1439 assert(file
== NULL
);
1440 ret
= bdrv_open_image(&file
, filename
, options
, "file",
1441 bdrv_inherited_flags(flags
),
1447 /* Find the right image format driver */
1448 drvname
= qdict_get_try_str(options
, "driver");
1450 drv
= bdrv_find_format(drvname
);
1451 qdict_del(options
, "driver");
1453 error_setg(errp
, "Invalid driver: '%s'", drvname
);
1461 ret
= find_image_format(file
, filename
, &drv
, &local_err
);
1463 error_setg(errp
, "Must specify either driver or file");
1473 /* Open the image */
1474 ret
= bdrv_open_common(bs
, file
, options
, flags
, drv
, &local_err
);
1479 if (file
&& (bs
->file
!= file
)) {
1484 /* If there is a backing file, use it */
1485 if ((flags
& BDRV_O_NO_BACKING
) == 0) {
1486 QDict
*backing_options
;
1488 qdict_extract_subqdict(options
, &backing_options
, "backing.");
1489 ret
= bdrv_open_backing_file(bs
, backing_options
, &local_err
);
1491 goto close_and_fail
;
1495 /* For snapshot=on, create a temporary qcow2 overlay. bs points to the
1496 * temporary snapshot afterwards. */
1497 if (snapshot_flags
) {
1498 bdrv_append_temp_snapshot(bs
, snapshot_flags
, &local_err
);
1500 error_propagate(errp
, local_err
);
1501 goto close_and_fail
;
1507 /* Check if any unknown options were used */
1508 if (options
&& (qdict_size(options
) != 0)) {
1509 const QDictEntry
*entry
= qdict_first(options
);
1510 if (flags
& BDRV_O_PROTOCOL
) {
1511 error_setg(errp
, "Block protocol '%s' doesn't support the option "
1512 "'%s'", drv
->format_name
, entry
->key
);
1514 error_setg(errp
, "Block format '%s' used by device '%s' doesn't "
1515 "support the option '%s'", drv
->format_name
,
1516 bs
->device_name
, entry
->key
);
1520 goto close_and_fail
;
1523 if (!bdrv_key_required(bs
)) {
1524 bdrv_dev_change_media_cb(bs
, true);
1525 } else if (!runstate_check(RUN_STATE_PRELAUNCH
)
1526 && !runstate_check(RUN_STATE_INMIGRATE
)
1527 && !runstate_check(RUN_STATE_PAUSED
)) { /* HACK */
1529 "Guest must be stopped for opening of encrypted image");
1531 goto close_and_fail
;
1542 QDECREF(bs
->options
);
1546 /* If *pbs is NULL, a new BDS has been created in this function and
1547 needs to be freed now. Otherwise, it does not need to be closed,
1548 since it has not really been opened yet. */
1552 error_propagate(errp
, local_err
);
1557 /* See fail path, but now the BDS has to be always closed */
1565 error_propagate(errp
, local_err
);
1570 typedef struct BlockReopenQueueEntry
{
1572 BDRVReopenState state
;
1573 QSIMPLEQ_ENTRY(BlockReopenQueueEntry
) entry
;
1574 } BlockReopenQueueEntry
;
1577 * Adds a BlockDriverState to a simple queue for an atomic, transactional
1578 * reopen of multiple devices.
1580 * bs_queue can either be an existing BlockReopenQueue that has had QSIMPLE_INIT
1581 * already performed, or alternatively may be NULL a new BlockReopenQueue will
1582 * be created and initialized. This newly created BlockReopenQueue should be
1583 * passed back in for subsequent calls that are intended to be of the same
1586 * bs is the BlockDriverState to add to the reopen queue.
1588 * flags contains the open flags for the associated bs
1590 * returns a pointer to bs_queue, which is either the newly allocated
1591 * bs_queue, or the existing bs_queue being used.
1594 BlockReopenQueue
*bdrv_reopen_queue(BlockReopenQueue
*bs_queue
,
1595 BlockDriverState
*bs
, int flags
)
1599 BlockReopenQueueEntry
*bs_entry
;
1600 if (bs_queue
== NULL
) {
1601 bs_queue
= g_new0(BlockReopenQueue
, 1);
1602 QSIMPLEQ_INIT(bs_queue
);
1605 /* bdrv_open() masks this flag out */
1606 flags
&= ~BDRV_O_PROTOCOL
;
1609 bdrv_reopen_queue(bs_queue
, bs
->file
, bdrv_inherited_flags(flags
));
1612 bs_entry
= g_new0(BlockReopenQueueEntry
, 1);
1613 QSIMPLEQ_INSERT_TAIL(bs_queue
, bs_entry
, entry
);
1615 bs_entry
->state
.bs
= bs
;
1616 bs_entry
->state
.flags
= flags
;
1622 * Reopen multiple BlockDriverStates atomically & transactionally.
1624 * The queue passed in (bs_queue) must have been built up previous
1625 * via bdrv_reopen_queue().
1627 * Reopens all BDS specified in the queue, with the appropriate
1628 * flags. All devices are prepared for reopen, and failure of any
1629 * device will cause all device changes to be abandonded, and intermediate
1632 * If all devices prepare successfully, then the changes are committed
1636 int bdrv_reopen_multiple(BlockReopenQueue
*bs_queue
, Error
**errp
)
1639 BlockReopenQueueEntry
*bs_entry
, *next
;
1640 Error
*local_err
= NULL
;
1642 assert(bs_queue
!= NULL
);
1646 QSIMPLEQ_FOREACH(bs_entry
, bs_queue
, entry
) {
1647 if (bdrv_reopen_prepare(&bs_entry
->state
, bs_queue
, &local_err
)) {
1648 error_propagate(errp
, local_err
);
1651 bs_entry
->prepared
= true;
1654 /* If we reach this point, we have success and just need to apply the
1657 QSIMPLEQ_FOREACH(bs_entry
, bs_queue
, entry
) {
1658 bdrv_reopen_commit(&bs_entry
->state
);
1664 QSIMPLEQ_FOREACH_SAFE(bs_entry
, bs_queue
, entry
, next
) {
1665 if (ret
&& bs_entry
->prepared
) {
1666 bdrv_reopen_abort(&bs_entry
->state
);
1675 /* Reopen a single BlockDriverState with the specified flags. */
1676 int bdrv_reopen(BlockDriverState
*bs
, int bdrv_flags
, Error
**errp
)
1679 Error
*local_err
= NULL
;
1680 BlockReopenQueue
*queue
= bdrv_reopen_queue(NULL
, bs
, bdrv_flags
);
1682 ret
= bdrv_reopen_multiple(queue
, &local_err
);
1683 if (local_err
!= NULL
) {
1684 error_propagate(errp
, local_err
);
1691 * Prepares a BlockDriverState for reopen. All changes are staged in the
1692 * 'opaque' field of the BDRVReopenState, which is used and allocated by
1693 * the block driver layer .bdrv_reopen_prepare()
1695 * bs is the BlockDriverState to reopen
1696 * flags are the new open flags
1697 * queue is the reopen queue
1699 * Returns 0 on success, non-zero on error. On error errp will be set
1702 * On failure, bdrv_reopen_abort() will be called to clean up any data.
1703 * It is the responsibility of the caller to then call the abort() or
1704 * commit() for any other BDS that have been left in a prepare() state
1707 int bdrv_reopen_prepare(BDRVReopenState
*reopen_state
, BlockReopenQueue
*queue
,
1711 Error
*local_err
= NULL
;
1714 assert(reopen_state
!= NULL
);
1715 assert(reopen_state
->bs
->drv
!= NULL
);
1716 drv
= reopen_state
->bs
->drv
;
1718 /* if we are to stay read-only, do not allow permission change
1720 if (!(reopen_state
->bs
->open_flags
& BDRV_O_ALLOW_RDWR
) &&
1721 reopen_state
->flags
& BDRV_O_RDWR
) {
1722 error_set(errp
, QERR_DEVICE_IS_READ_ONLY
,
1723 reopen_state
->bs
->device_name
);
1728 ret
= bdrv_flush(reopen_state
->bs
);
1730 error_set(errp
, ERROR_CLASS_GENERIC_ERROR
, "Error (%s) flushing drive",
1735 if (drv
->bdrv_reopen_prepare
) {
1736 ret
= drv
->bdrv_reopen_prepare(reopen_state
, queue
, &local_err
);
1738 if (local_err
!= NULL
) {
1739 error_propagate(errp
, local_err
);
1741 error_setg(errp
, "failed while preparing to reopen image '%s'",
1742 reopen_state
->bs
->filename
);
1747 /* It is currently mandatory to have a bdrv_reopen_prepare()
1748 * handler for each supported drv. */
1749 error_set(errp
, QERR_BLOCK_FORMAT_FEATURE_NOT_SUPPORTED
,
1750 drv
->format_name
, reopen_state
->bs
->device_name
,
1751 "reopening of file");
1763 * Takes the staged changes for the reopen from bdrv_reopen_prepare(), and
1764 * makes them final by swapping the staging BlockDriverState contents into
1765 * the active BlockDriverState contents.
1767 void bdrv_reopen_commit(BDRVReopenState
*reopen_state
)
1771 assert(reopen_state
!= NULL
);
1772 drv
= reopen_state
->bs
->drv
;
1773 assert(drv
!= NULL
);
1775 /* If there are any driver level actions to take */
1776 if (drv
->bdrv_reopen_commit
) {
1777 drv
->bdrv_reopen_commit(reopen_state
);
1780 /* set BDS specific flags now */
1781 reopen_state
->bs
->open_flags
= reopen_state
->flags
;
1782 reopen_state
->bs
->enable_write_cache
= !!(reopen_state
->flags
&
1784 reopen_state
->bs
->read_only
= !(reopen_state
->flags
& BDRV_O_RDWR
);
1786 bdrv_refresh_limits(reopen_state
->bs
);
1790 * Abort the reopen, and delete and free the staged changes in
1793 void bdrv_reopen_abort(BDRVReopenState
*reopen_state
)
1797 assert(reopen_state
!= NULL
);
1798 drv
= reopen_state
->bs
->drv
;
1799 assert(drv
!= NULL
);
1801 if (drv
->bdrv_reopen_abort
) {
1802 drv
->bdrv_reopen_abort(reopen_state
);
1807 void bdrv_close(BlockDriverState
*bs
)
1810 block_job_cancel_sync(bs
->job
);
1812 bdrv_drain_all(); /* complete I/O */
1814 bdrv_drain_all(); /* in case flush left pending I/O */
1815 notifier_list_notify(&bs
->close_notifiers
, bs
);
1818 if (bs
->backing_hd
) {
1819 BlockDriverState
*backing_hd
= bs
->backing_hd
;
1820 bdrv_set_backing_hd(bs
, NULL
);
1821 bdrv_unref(backing_hd
);
1823 bs
->drv
->bdrv_close(bs
);
1827 bs
->copy_on_read
= 0;
1828 bs
->backing_file
[0] = '\0';
1829 bs
->backing_format
[0] = '\0';
1830 bs
->total_sectors
= 0;
1835 bs
->zero_beyond_eof
= false;
1836 QDECREF(bs
->options
);
1839 if (bs
->file
!= NULL
) {
1840 bdrv_unref(bs
->file
);
1845 bdrv_dev_change_media_cb(bs
, false);
1847 /*throttling disk I/O limits*/
1848 if (bs
->io_limits_enabled
) {
1849 bdrv_io_limits_disable(bs
);
1853 void bdrv_close_all(void)
1855 BlockDriverState
*bs
;
1857 QTAILQ_FOREACH(bs
, &bdrv_states
, device_list
) {
1858 AioContext
*aio_context
= bdrv_get_aio_context(bs
);
1860 aio_context_acquire(aio_context
);
1862 aio_context_release(aio_context
);
1866 /* Check if any requests are in-flight (including throttled requests) */
1867 static bool bdrv_requests_pending(BlockDriverState
*bs
)
1869 if (!QLIST_EMPTY(&bs
->tracked_requests
)) {
1872 if (!qemu_co_queue_empty(&bs
->throttled_reqs
[0])) {
1875 if (!qemu_co_queue_empty(&bs
->throttled_reqs
[1])) {
1878 if (bs
->file
&& bdrv_requests_pending(bs
->file
)) {
1881 if (bs
->backing_hd
&& bdrv_requests_pending(bs
->backing_hd
)) {
1888 * Wait for pending requests to complete across all BlockDriverStates
1890 * This function does not flush data to disk, use bdrv_flush_all() for that
1891 * after calling this function.
1893 * Note that completion of an asynchronous I/O operation can trigger any
1894 * number of other I/O operations on other devices---for example a coroutine
1895 * can be arbitrarily complex and a constant flow of I/O can come until the
1896 * coroutine is complete. Because of this, it is not possible to have a
1897 * function to drain a single device's I/O queue.
1899 void bdrv_drain_all(void)
1901 /* Always run first iteration so any pending completion BHs run */
1903 BlockDriverState
*bs
;
1908 QTAILQ_FOREACH(bs
, &bdrv_states
, device_list
) {
1909 AioContext
*aio_context
= bdrv_get_aio_context(bs
);
1912 aio_context_acquire(aio_context
);
1913 bdrv_start_throttled_reqs(bs
);
1914 bs_busy
= bdrv_requests_pending(bs
);
1915 bs_busy
|= aio_poll(aio_context
, bs_busy
);
1916 aio_context_release(aio_context
);
1923 /* make a BlockDriverState anonymous by removing from bdrv_state and
1924 * graph_bdrv_state list.
1925 Also, NULL terminate the device_name to prevent double remove */
1926 void bdrv_make_anon(BlockDriverState
*bs
)
1928 if (bs
->device_name
[0] != '\0') {
1929 QTAILQ_REMOVE(&bdrv_states
, bs
, device_list
);
1931 bs
->device_name
[0] = '\0';
1932 if (bs
->node_name
[0] != '\0') {
1933 QTAILQ_REMOVE(&graph_bdrv_states
, bs
, node_list
);
1935 bs
->node_name
[0] = '\0';
1938 static void bdrv_rebind(BlockDriverState
*bs
)
1940 if (bs
->drv
&& bs
->drv
->bdrv_rebind
) {
1941 bs
->drv
->bdrv_rebind(bs
);
1945 static void bdrv_move_feature_fields(BlockDriverState
*bs_dest
,
1946 BlockDriverState
*bs_src
)
1948 /* move some fields that need to stay attached to the device */
1951 bs_dest
->dev_ops
= bs_src
->dev_ops
;
1952 bs_dest
->dev_opaque
= bs_src
->dev_opaque
;
1953 bs_dest
->dev
= bs_src
->dev
;
1954 bs_dest
->guest_block_size
= bs_src
->guest_block_size
;
1955 bs_dest
->copy_on_read
= bs_src
->copy_on_read
;
1957 bs_dest
->enable_write_cache
= bs_src
->enable_write_cache
;
1959 /* i/o throttled req */
1960 memcpy(&bs_dest
->throttle_state
,
1961 &bs_src
->throttle_state
,
1962 sizeof(ThrottleState
));
1963 bs_dest
->throttled_reqs
[0] = bs_src
->throttled_reqs
[0];
1964 bs_dest
->throttled_reqs
[1] = bs_src
->throttled_reqs
[1];
1965 bs_dest
->io_limits_enabled
= bs_src
->io_limits_enabled
;
1968 bs_dest
->on_read_error
= bs_src
->on_read_error
;
1969 bs_dest
->on_write_error
= bs_src
->on_write_error
;
1972 bs_dest
->iostatus_enabled
= bs_src
->iostatus_enabled
;
1973 bs_dest
->iostatus
= bs_src
->iostatus
;
1976 bs_dest
->dirty_bitmaps
= bs_src
->dirty_bitmaps
;
1978 /* reference count */
1979 bs_dest
->refcnt
= bs_src
->refcnt
;
1982 bs_dest
->job
= bs_src
->job
;
1984 /* keep the same entry in bdrv_states */
1985 pstrcpy(bs_dest
->device_name
, sizeof(bs_dest
->device_name
),
1986 bs_src
->device_name
);
1987 bs_dest
->device_list
= bs_src
->device_list
;
1988 memcpy(bs_dest
->op_blockers
, bs_src
->op_blockers
,
1989 sizeof(bs_dest
->op_blockers
));
1993 * Swap bs contents for two image chains while they are live,
1994 * while keeping required fields on the BlockDriverState that is
1995 * actually attached to a device.
1997 * This will modify the BlockDriverState fields, and swap contents
1998 * between bs_new and bs_old. Both bs_new and bs_old are modified.
2000 * bs_new is required to be anonymous.
2002 * This function does not create any image files.
2004 void bdrv_swap(BlockDriverState
*bs_new
, BlockDriverState
*bs_old
)
2006 BlockDriverState tmp
;
2008 /* The code needs to swap the node_name but simply swapping node_list won't
2009 * work so first remove the nodes from the graph list, do the swap then
2010 * insert them back if needed.
2012 if (bs_new
->node_name
[0] != '\0') {
2013 QTAILQ_REMOVE(&graph_bdrv_states
, bs_new
, node_list
);
2015 if (bs_old
->node_name
[0] != '\0') {
2016 QTAILQ_REMOVE(&graph_bdrv_states
, bs_old
, node_list
);
2019 /* bs_new must be anonymous and shouldn't have anything fancy enabled */
2020 assert(bs_new
->device_name
[0] == '\0');
2021 assert(QLIST_EMPTY(&bs_new
->dirty_bitmaps
));
2022 assert(bs_new
->job
== NULL
);
2023 assert(bs_new
->dev
== NULL
);
2024 assert(bs_new
->io_limits_enabled
== false);
2025 assert(!throttle_have_timer(&bs_new
->throttle_state
));
2031 /* there are some fields that should not be swapped, move them back */
2032 bdrv_move_feature_fields(&tmp
, bs_old
);
2033 bdrv_move_feature_fields(bs_old
, bs_new
);
2034 bdrv_move_feature_fields(bs_new
, &tmp
);
2036 /* bs_new shouldn't be in bdrv_states even after the swap! */
2037 assert(bs_new
->device_name
[0] == '\0');
2039 /* Check a few fields that should remain attached to the device */
2040 assert(bs_new
->dev
== NULL
);
2041 assert(bs_new
->job
== NULL
);
2042 assert(bs_new
->io_limits_enabled
== false);
2043 assert(!throttle_have_timer(&bs_new
->throttle_state
));
2045 /* insert the nodes back into the graph node list if needed */
2046 if (bs_new
->node_name
[0] != '\0') {
2047 QTAILQ_INSERT_TAIL(&graph_bdrv_states
, bs_new
, node_list
);
2049 if (bs_old
->node_name
[0] != '\0') {
2050 QTAILQ_INSERT_TAIL(&graph_bdrv_states
, bs_old
, node_list
);
2053 bdrv_rebind(bs_new
);
2054 bdrv_rebind(bs_old
);
2058 * Add new bs contents at the top of an image chain while the chain is
2059 * live, while keeping required fields on the top layer.
2061 * This will modify the BlockDriverState fields, and swap contents
2062 * between bs_new and bs_top. Both bs_new and bs_top are modified.
2064 * bs_new is required to be anonymous.
2066 * This function does not create any image files.
2068 void bdrv_append(BlockDriverState
*bs_new
, BlockDriverState
*bs_top
)
2070 bdrv_swap(bs_new
, bs_top
);
2072 /* The contents of 'tmp' will become bs_top, as we are
2073 * swapping bs_new and bs_top contents. */
2074 bdrv_set_backing_hd(bs_top
, bs_new
);
2077 static void bdrv_delete(BlockDriverState
*bs
)
2081 assert(bdrv_op_blocker_is_empty(bs
));
2082 assert(!bs
->refcnt
);
2083 assert(QLIST_EMPTY(&bs
->dirty_bitmaps
));
2087 /* remove from list, if necessary */
2093 int bdrv_attach_dev(BlockDriverState
*bs
, void *dev
)
2094 /* TODO change to DeviceState *dev when all users are qdevified */
2100 bdrv_iostatus_reset(bs
);
2104 /* TODO qdevified devices don't use this, remove when devices are qdevified */
2105 void bdrv_attach_dev_nofail(BlockDriverState
*bs
, void *dev
)
2107 if (bdrv_attach_dev(bs
, dev
) < 0) {
2112 void bdrv_detach_dev(BlockDriverState
*bs
, void *dev
)
2113 /* TODO change to DeviceState *dev when all users are qdevified */
2115 assert(bs
->dev
== dev
);
2118 bs
->dev_opaque
= NULL
;
2119 bs
->guest_block_size
= 512;
2122 /* TODO change to return DeviceState * when all users are qdevified */
2123 void *bdrv_get_attached_dev(BlockDriverState
*bs
)
2128 void bdrv_set_dev_ops(BlockDriverState
*bs
, const BlockDevOps
*ops
,
2132 bs
->dev_opaque
= opaque
;
2135 void bdrv_emit_qmp_error_event(const BlockDriverState
*bdrv
,
2136 enum MonitorEvent ev
,
2137 BlockErrorAction action
, bool is_read
)
2140 const char *action_str
;
2143 case BDRV_ACTION_REPORT
:
2144 action_str
= "report";
2146 case BDRV_ACTION_IGNORE
:
2147 action_str
= "ignore";
2149 case BDRV_ACTION_STOP
:
2150 action_str
= "stop";
2156 data
= qobject_from_jsonf("{ 'device': %s, 'action': %s, 'operation': %s }",
2159 is_read
? "read" : "write");
2160 monitor_protocol_event(ev
, data
);
2162 qobject_decref(data
);
2165 static void bdrv_emit_qmp_eject_event(BlockDriverState
*bs
, bool ejected
)
2169 data
= qobject_from_jsonf("{ 'device': %s, 'tray-open': %i }",
2170 bdrv_get_device_name(bs
), ejected
);
2171 monitor_protocol_event(QEVENT_DEVICE_TRAY_MOVED
, data
);
2173 qobject_decref(data
);
2176 static void bdrv_dev_change_media_cb(BlockDriverState
*bs
, bool load
)
2178 if (bs
->dev_ops
&& bs
->dev_ops
->change_media_cb
) {
2179 bool tray_was_closed
= !bdrv_dev_is_tray_open(bs
);
2180 bs
->dev_ops
->change_media_cb(bs
->dev_opaque
, load
);
2181 if (tray_was_closed
) {
2183 bdrv_emit_qmp_eject_event(bs
, true);
2187 bdrv_emit_qmp_eject_event(bs
, false);
2192 bool bdrv_dev_has_removable_media(BlockDriverState
*bs
)
2194 return !bs
->dev
|| (bs
->dev_ops
&& bs
->dev_ops
->change_media_cb
);
2197 void bdrv_dev_eject_request(BlockDriverState
*bs
, bool force
)
2199 if (bs
->dev_ops
&& bs
->dev_ops
->eject_request_cb
) {
2200 bs
->dev_ops
->eject_request_cb(bs
->dev_opaque
, force
);
2204 bool bdrv_dev_is_tray_open(BlockDriverState
*bs
)
2206 if (bs
->dev_ops
&& bs
->dev_ops
->is_tray_open
) {
2207 return bs
->dev_ops
->is_tray_open(bs
->dev_opaque
);
2212 static void bdrv_dev_resize_cb(BlockDriverState
*bs
)
2214 if (bs
->dev_ops
&& bs
->dev_ops
->resize_cb
) {
2215 bs
->dev_ops
->resize_cb(bs
->dev_opaque
);
2219 bool bdrv_dev_is_medium_locked(BlockDriverState
*bs
)
2221 if (bs
->dev_ops
&& bs
->dev_ops
->is_medium_locked
) {
2222 return bs
->dev_ops
->is_medium_locked(bs
->dev_opaque
);
2228 * Run consistency checks on an image
2230 * Returns 0 if the check could be completed (it doesn't mean that the image is
2231 * free of errors) or -errno when an internal error occurred. The results of the
2232 * check are stored in res.
2234 int bdrv_check(BlockDriverState
*bs
, BdrvCheckResult
*res
, BdrvCheckMode fix
)
2236 if (bs
->drv
->bdrv_check
== NULL
) {
2240 memset(res
, 0, sizeof(*res
));
2241 return bs
->drv
->bdrv_check(bs
, res
, fix
);
2244 #define COMMIT_BUF_SECTORS 2048
2246 /* commit COW file into the raw image */
2247 int bdrv_commit(BlockDriverState
*bs
)
2249 BlockDriver
*drv
= bs
->drv
;
2250 int64_t sector
, total_sectors
, length
, backing_length
;
2251 int n
, ro
, open_flags
;
2253 uint8_t *buf
= NULL
;
2254 char filename
[PATH_MAX
];
2259 if (!bs
->backing_hd
) {
2263 if (bdrv_op_is_blocked(bs
, BLOCK_OP_TYPE_COMMIT
, NULL
) ||
2264 bdrv_op_is_blocked(bs
->backing_hd
, BLOCK_OP_TYPE_COMMIT
, NULL
)) {
2268 ro
= bs
->backing_hd
->read_only
;
2269 /* Use pstrcpy (not strncpy): filename must be NUL-terminated. */
2270 pstrcpy(filename
, sizeof(filename
), bs
->backing_hd
->filename
);
2271 open_flags
= bs
->backing_hd
->open_flags
;
2274 if (bdrv_reopen(bs
->backing_hd
, open_flags
| BDRV_O_RDWR
, NULL
)) {
2279 length
= bdrv_getlength(bs
);
2285 backing_length
= bdrv_getlength(bs
->backing_hd
);
2286 if (backing_length
< 0) {
2287 ret
= backing_length
;
2291 /* If our top snapshot is larger than the backing file image,
2292 * grow the backing file image if possible. If not possible,
2293 * we must return an error */
2294 if (length
> backing_length
) {
2295 ret
= bdrv_truncate(bs
->backing_hd
, length
);
2301 total_sectors
= length
>> BDRV_SECTOR_BITS
;
2302 buf
= g_malloc(COMMIT_BUF_SECTORS
* BDRV_SECTOR_SIZE
);
2304 for (sector
= 0; sector
< total_sectors
; sector
+= n
) {
2305 ret
= bdrv_is_allocated(bs
, sector
, COMMIT_BUF_SECTORS
, &n
);
2310 ret
= bdrv_read(bs
, sector
, buf
, n
);
2315 ret
= bdrv_write(bs
->backing_hd
, sector
, buf
, n
);
2322 if (drv
->bdrv_make_empty
) {
2323 ret
= drv
->bdrv_make_empty(bs
);
2331 * Make sure all data we wrote to the backing device is actually
2334 if (bs
->backing_hd
) {
2335 bdrv_flush(bs
->backing_hd
);
2343 /* ignoring error return here */
2344 bdrv_reopen(bs
->backing_hd
, open_flags
& ~BDRV_O_RDWR
, NULL
);
2350 int bdrv_commit_all(void)
2352 BlockDriverState
*bs
;
2354 QTAILQ_FOREACH(bs
, &bdrv_states
, device_list
) {
2355 AioContext
*aio_context
= bdrv_get_aio_context(bs
);
2357 aio_context_acquire(aio_context
);
2358 if (bs
->drv
&& bs
->backing_hd
) {
2359 int ret
= bdrv_commit(bs
);
2361 aio_context_release(aio_context
);
2365 aio_context_release(aio_context
);
2371 * Remove an active request from the tracked requests list
2373 * This function should be called when a tracked request is completing.
2375 static void tracked_request_end(BdrvTrackedRequest
*req
)
2377 if (req
->serialising
) {
2378 req
->bs
->serialising_in_flight
--;
2381 QLIST_REMOVE(req
, list
);
2382 qemu_co_queue_restart_all(&req
->wait_queue
);
2386 * Add an active request to the tracked requests list
2388 static void tracked_request_begin(BdrvTrackedRequest
*req
,
2389 BlockDriverState
*bs
,
2391 unsigned int bytes
, bool is_write
)
2393 *req
= (BdrvTrackedRequest
){
2397 .is_write
= is_write
,
2398 .co
= qemu_coroutine_self(),
2399 .serialising
= false,
2400 .overlap_offset
= offset
,
2401 .overlap_bytes
= bytes
,
2404 qemu_co_queue_init(&req
->wait_queue
);
2406 QLIST_INSERT_HEAD(&bs
->tracked_requests
, req
, list
);
2409 static void mark_request_serialising(BdrvTrackedRequest
*req
, uint64_t align
)
2411 int64_t overlap_offset
= req
->offset
& ~(align
- 1);
2412 unsigned int overlap_bytes
= ROUND_UP(req
->offset
+ req
->bytes
, align
)
2415 if (!req
->serialising
) {
2416 req
->bs
->serialising_in_flight
++;
2417 req
->serialising
= true;
2420 req
->overlap_offset
= MIN(req
->overlap_offset
, overlap_offset
);
2421 req
->overlap_bytes
= MAX(req
->overlap_bytes
, overlap_bytes
);
2425 * Round a region to cluster boundaries
2427 void bdrv_round_to_clusters(BlockDriverState
*bs
,
2428 int64_t sector_num
, int nb_sectors
,
2429 int64_t *cluster_sector_num
,
2430 int *cluster_nb_sectors
)
2432 BlockDriverInfo bdi
;
2434 if (bdrv_get_info(bs
, &bdi
) < 0 || bdi
.cluster_size
== 0) {
2435 *cluster_sector_num
= sector_num
;
2436 *cluster_nb_sectors
= nb_sectors
;
2438 int64_t c
= bdi
.cluster_size
/ BDRV_SECTOR_SIZE
;
2439 *cluster_sector_num
= QEMU_ALIGN_DOWN(sector_num
, c
);
2440 *cluster_nb_sectors
= QEMU_ALIGN_UP(sector_num
- *cluster_sector_num
+
2445 static int bdrv_get_cluster_size(BlockDriverState
*bs
)
2447 BlockDriverInfo bdi
;
2450 ret
= bdrv_get_info(bs
, &bdi
);
2451 if (ret
< 0 || bdi
.cluster_size
== 0) {
2452 return bs
->request_alignment
;
2454 return bdi
.cluster_size
;
2458 static bool tracked_request_overlaps(BdrvTrackedRequest
*req
,
2459 int64_t offset
, unsigned int bytes
)
2462 if (offset
>= req
->overlap_offset
+ req
->overlap_bytes
) {
2466 if (req
->overlap_offset
>= offset
+ bytes
) {
2472 static bool coroutine_fn
wait_serialising_requests(BdrvTrackedRequest
*self
)
2474 BlockDriverState
*bs
= self
->bs
;
2475 BdrvTrackedRequest
*req
;
2477 bool waited
= false;
2479 if (!bs
->serialising_in_flight
) {
2485 QLIST_FOREACH(req
, &bs
->tracked_requests
, list
) {
2486 if (req
== self
|| (!req
->serialising
&& !self
->serialising
)) {
2489 if (tracked_request_overlaps(req
, self
->overlap_offset
,
2490 self
->overlap_bytes
))
2492 /* Hitting this means there was a reentrant request, for
2493 * example, a block driver issuing nested requests. This must
2494 * never happen since it means deadlock.
2496 assert(qemu_coroutine_self() != req
->co
);
2498 /* If the request is already (indirectly) waiting for us, or
2499 * will wait for us as soon as it wakes up, then just go on
2500 * (instead of producing a deadlock in the former case). */
2501 if (!req
->waiting_for
) {
2502 self
->waiting_for
= req
;
2503 qemu_co_queue_wait(&req
->wait_queue
);
2504 self
->waiting_for
= NULL
;
2519 * -EINVAL - backing format specified, but no file
2520 * -ENOSPC - can't update the backing file because no space is left in the
2522 * -ENOTSUP - format driver doesn't support changing the backing file
2524 int bdrv_change_backing_file(BlockDriverState
*bs
,
2525 const char *backing_file
, const char *backing_fmt
)
2527 BlockDriver
*drv
= bs
->drv
;
2530 /* Backing file format doesn't make sense without a backing file */
2531 if (backing_fmt
&& !backing_file
) {
2535 if (drv
->bdrv_change_backing_file
!= NULL
) {
2536 ret
= drv
->bdrv_change_backing_file(bs
, backing_file
, backing_fmt
);
2542 pstrcpy(bs
->backing_file
, sizeof(bs
->backing_file
), backing_file
?: "");
2543 pstrcpy(bs
->backing_format
, sizeof(bs
->backing_format
), backing_fmt
?: "");
2549 * Finds the image layer in the chain that has 'bs' as its backing file.
2551 * active is the current topmost image.
2553 * Returns NULL if bs is not found in active's image chain,
2554 * or if active == bs.
2556 BlockDriverState
*bdrv_find_overlay(BlockDriverState
*active
,
2557 BlockDriverState
*bs
)
2559 BlockDriverState
*overlay
= NULL
;
2560 BlockDriverState
*intermediate
;
2562 assert(active
!= NULL
);
2565 /* if bs is the same as active, then by definition it has no overlay
2571 intermediate
= active
;
2572 while (intermediate
->backing_hd
) {
2573 if (intermediate
->backing_hd
== bs
) {
2574 overlay
= intermediate
;
2577 intermediate
= intermediate
->backing_hd
;
2583 typedef struct BlkIntermediateStates
{
2584 BlockDriverState
*bs
;
2585 QSIMPLEQ_ENTRY(BlkIntermediateStates
) entry
;
2586 } BlkIntermediateStates
;
2590 * Drops images above 'base' up to and including 'top', and sets the image
2591 * above 'top' to have base as its backing file.
2593 * Requires that the overlay to 'top' is opened r/w, so that the backing file
2594 * information in 'bs' can be properly updated.
2596 * E.g., this will convert the following chain:
2597 * bottom <- base <- intermediate <- top <- active
2601 * bottom <- base <- active
2603 * It is allowed for bottom==base, in which case it converts:
2605 * base <- intermediate <- top <- active
2612 * if active == top, that is considered an error
2615 int bdrv_drop_intermediate(BlockDriverState
*active
, BlockDriverState
*top
,
2616 BlockDriverState
*base
)
2618 BlockDriverState
*intermediate
;
2619 BlockDriverState
*base_bs
= NULL
;
2620 BlockDriverState
*new_top_bs
= NULL
;
2621 BlkIntermediateStates
*intermediate_state
, *next
;
2624 QSIMPLEQ_HEAD(states_to_delete
, BlkIntermediateStates
) states_to_delete
;
2625 QSIMPLEQ_INIT(&states_to_delete
);
2627 if (!top
->drv
|| !base
->drv
) {
2631 new_top_bs
= bdrv_find_overlay(active
, top
);
2633 if (new_top_bs
== NULL
) {
2634 /* we could not find the image above 'top', this is an error */
2638 /* special case of new_top_bs->backing_hd already pointing to base - nothing
2639 * to do, no intermediate images */
2640 if (new_top_bs
->backing_hd
== base
) {
2647 /* now we will go down through the list, and add each BDS we find
2648 * into our deletion queue, until we hit the 'base'
2650 while (intermediate
) {
2651 intermediate_state
= g_malloc0(sizeof(BlkIntermediateStates
));
2652 intermediate_state
->bs
= intermediate
;
2653 QSIMPLEQ_INSERT_TAIL(&states_to_delete
, intermediate_state
, entry
);
2655 if (intermediate
->backing_hd
== base
) {
2656 base_bs
= intermediate
->backing_hd
;
2659 intermediate
= intermediate
->backing_hd
;
2661 if (base_bs
== NULL
) {
2662 /* something went wrong, we did not end at the base. safely
2663 * unravel everything, and exit with error */
2667 /* success - we can delete the intermediate states, and link top->base */
2668 ret
= bdrv_change_backing_file(new_top_bs
, base_bs
->filename
,
2669 base_bs
->drv
? base_bs
->drv
->format_name
: "");
2673 bdrv_set_backing_hd(new_top_bs
, base_bs
);
2675 QSIMPLEQ_FOREACH_SAFE(intermediate_state
, &states_to_delete
, entry
, next
) {
2676 /* so that bdrv_close() does not recursively close the chain */
2677 bdrv_set_backing_hd(intermediate_state
->bs
, NULL
);
2678 bdrv_unref(intermediate_state
->bs
);
2683 QSIMPLEQ_FOREACH_SAFE(intermediate_state
, &states_to_delete
, entry
, next
) {
2684 g_free(intermediate_state
);
2690 static int bdrv_check_byte_request(BlockDriverState
*bs
, int64_t offset
,
2695 if (size
> INT_MAX
) {
2699 if (!bdrv_is_inserted(bs
))
2705 len
= bdrv_getlength(bs
);
2710 if ((offset
> len
) || (len
- offset
< size
))
2716 static int bdrv_check_request(BlockDriverState
*bs
, int64_t sector_num
,
2719 if (nb_sectors
< 0 || nb_sectors
> INT_MAX
/ BDRV_SECTOR_SIZE
) {
2723 return bdrv_check_byte_request(bs
, sector_num
* BDRV_SECTOR_SIZE
,
2724 nb_sectors
* BDRV_SECTOR_SIZE
);
2727 typedef struct RwCo
{
2728 BlockDriverState
*bs
;
2733 BdrvRequestFlags flags
;
2736 static void coroutine_fn
bdrv_rw_co_entry(void *opaque
)
2738 RwCo
*rwco
= opaque
;
2740 if (!rwco
->is_write
) {
2741 rwco
->ret
= bdrv_co_do_preadv(rwco
->bs
, rwco
->offset
,
2742 rwco
->qiov
->size
, rwco
->qiov
,
2745 rwco
->ret
= bdrv_co_do_pwritev(rwco
->bs
, rwco
->offset
,
2746 rwco
->qiov
->size
, rwco
->qiov
,
2752 * Process a vectored synchronous request using coroutines
2754 static int bdrv_prwv_co(BlockDriverState
*bs
, int64_t offset
,
2755 QEMUIOVector
*qiov
, bool is_write
,
2756 BdrvRequestFlags flags
)
2763 .is_write
= is_write
,
2769 * In sync call context, when the vcpu is blocked, this throttling timer
2770 * will not fire; so the I/O throttling function has to be disabled here
2771 * if it has been enabled.
2773 if (bs
->io_limits_enabled
) {
2774 fprintf(stderr
, "Disabling I/O throttling on '%s' due "
2775 "to synchronous I/O.\n", bdrv_get_device_name(bs
));
2776 bdrv_io_limits_disable(bs
);
2779 if (qemu_in_coroutine()) {
2780 /* Fast-path if already in coroutine context */
2781 bdrv_rw_co_entry(&rwco
);
2783 AioContext
*aio_context
= bdrv_get_aio_context(bs
);
2785 co
= qemu_coroutine_create(bdrv_rw_co_entry
);
2786 qemu_coroutine_enter(co
, &rwco
);
2787 while (rwco
.ret
== NOT_DONE
) {
2788 aio_poll(aio_context
, true);
2795 * Process a synchronous request using coroutines
2797 static int bdrv_rw_co(BlockDriverState
*bs
, int64_t sector_num
, uint8_t *buf
,
2798 int nb_sectors
, bool is_write
, BdrvRequestFlags flags
)
2801 struct iovec iov
= {
2802 .iov_base
= (void *)buf
,
2803 .iov_len
= nb_sectors
* BDRV_SECTOR_SIZE
,
2806 if (nb_sectors
< 0 || nb_sectors
> INT_MAX
/ BDRV_SECTOR_SIZE
) {
2810 qemu_iovec_init_external(&qiov
, &iov
, 1);
2811 return bdrv_prwv_co(bs
, sector_num
<< BDRV_SECTOR_BITS
,
2812 &qiov
, is_write
, flags
);
2815 /* return < 0 if error. See bdrv_write() for the return codes */
2816 int bdrv_read(BlockDriverState
*bs
, int64_t sector_num
,
2817 uint8_t *buf
, int nb_sectors
)
2819 return bdrv_rw_co(bs
, sector_num
, buf
, nb_sectors
, false, 0);
2822 /* Just like bdrv_read(), but with I/O throttling temporarily disabled */
2823 int bdrv_read_unthrottled(BlockDriverState
*bs
, int64_t sector_num
,
2824 uint8_t *buf
, int nb_sectors
)
2829 enabled
= bs
->io_limits_enabled
;
2830 bs
->io_limits_enabled
= false;
2831 ret
= bdrv_read(bs
, sector_num
, buf
, nb_sectors
);
2832 bs
->io_limits_enabled
= enabled
;
2836 /* Return < 0 if error. Important errors are:
2837 -EIO generic I/O error (may happen for all errors)
2838 -ENOMEDIUM No media inserted.
2839 -EINVAL Invalid sector number or nb_sectors
2840 -EACCES Trying to write a read-only device
2842 int bdrv_write(BlockDriverState
*bs
, int64_t sector_num
,
2843 const uint8_t *buf
, int nb_sectors
)
2845 return bdrv_rw_co(bs
, sector_num
, (uint8_t *)buf
, nb_sectors
, true, 0);
2848 int bdrv_write_zeroes(BlockDriverState
*bs
, int64_t sector_num
,
2849 int nb_sectors
, BdrvRequestFlags flags
)
2851 return bdrv_rw_co(bs
, sector_num
, NULL
, nb_sectors
, true,
2852 BDRV_REQ_ZERO_WRITE
| flags
);
2856 * Completely zero out a block device with the help of bdrv_write_zeroes.
2857 * The operation is sped up by checking the block status and only writing
2858 * zeroes to the device if they currently do not return zeroes. Optional
2859 * flags are passed through to bdrv_write_zeroes (e.g. BDRV_REQ_MAY_UNMAP).
2861 * Returns < 0 on error, 0 on success. For error codes see bdrv_write().
2863 int bdrv_make_zero(BlockDriverState
*bs
, BdrvRequestFlags flags
)
2865 int64_t target_size
;
2866 int64_t ret
, nb_sectors
, sector_num
= 0;
2869 target_size
= bdrv_getlength(bs
);
2870 if (target_size
< 0) {
2873 target_size
/= BDRV_SECTOR_SIZE
;
2876 nb_sectors
= target_size
- sector_num
;
2877 if (nb_sectors
<= 0) {
2880 if (nb_sectors
> INT_MAX
) {
2881 nb_sectors
= INT_MAX
;
2883 ret
= bdrv_get_block_status(bs
, sector_num
, nb_sectors
, &n
);
2885 error_report("error getting block status at sector %" PRId64
": %s",
2886 sector_num
, strerror(-ret
));
2889 if (ret
& BDRV_BLOCK_ZERO
) {
2893 ret
= bdrv_write_zeroes(bs
, sector_num
, n
, flags
);
2895 error_report("error writing zeroes at sector %" PRId64
": %s",
2896 sector_num
, strerror(-ret
));
2903 int bdrv_pread(BlockDriverState
*bs
, int64_t offset
, void *buf
, int bytes
)
2906 struct iovec iov
= {
2907 .iov_base
= (void *)buf
,
2916 qemu_iovec_init_external(&qiov
, &iov
, 1);
2917 ret
= bdrv_prwv_co(bs
, offset
, &qiov
, false, 0);
2925 int bdrv_pwritev(BlockDriverState
*bs
, int64_t offset
, QEMUIOVector
*qiov
)
2929 ret
= bdrv_prwv_co(bs
, offset
, qiov
, true, 0);
2937 int bdrv_pwrite(BlockDriverState
*bs
, int64_t offset
,
2938 const void *buf
, int bytes
)
2941 struct iovec iov
= {
2942 .iov_base
= (void *) buf
,
2950 qemu_iovec_init_external(&qiov
, &iov
, 1);
2951 return bdrv_pwritev(bs
, offset
, &qiov
);
2955 * Writes to the file and ensures that no writes are reordered across this
2956 * request (acts as a barrier)
2958 * Returns 0 on success, -errno in error cases.
2960 int bdrv_pwrite_sync(BlockDriverState
*bs
, int64_t offset
,
2961 const void *buf
, int count
)
2965 ret
= bdrv_pwrite(bs
, offset
, buf
, count
);
2970 /* No flush needed for cache modes that already do it */
2971 if (bs
->enable_write_cache
) {
2978 static int coroutine_fn
bdrv_co_do_copy_on_readv(BlockDriverState
*bs
,
2979 int64_t sector_num
, int nb_sectors
, QEMUIOVector
*qiov
)
2981 /* Perform I/O through a temporary buffer so that users who scribble over
2982 * their read buffer while the operation is in progress do not end up
2983 * modifying the image file. This is critical for zero-copy guest I/O
2984 * where anything might happen inside guest memory.
2986 void *bounce_buffer
;
2988 BlockDriver
*drv
= bs
->drv
;
2990 QEMUIOVector bounce_qiov
;
2991 int64_t cluster_sector_num
;
2992 int cluster_nb_sectors
;
2996 /* Cover entire cluster so no additional backing file I/O is required when
2997 * allocating cluster in the image file.
2999 bdrv_round_to_clusters(bs
, sector_num
, nb_sectors
,
3000 &cluster_sector_num
, &cluster_nb_sectors
);
3002 trace_bdrv_co_do_copy_on_readv(bs
, sector_num
, nb_sectors
,
3003 cluster_sector_num
, cluster_nb_sectors
);
3005 iov
.iov_len
= cluster_nb_sectors
* BDRV_SECTOR_SIZE
;
3006 iov
.iov_base
= bounce_buffer
= qemu_blockalign(bs
, iov
.iov_len
);
3007 qemu_iovec_init_external(&bounce_qiov
, &iov
, 1);
3009 ret
= drv
->bdrv_co_readv(bs
, cluster_sector_num
, cluster_nb_sectors
,
3015 if (drv
->bdrv_co_write_zeroes
&&
3016 buffer_is_zero(bounce_buffer
, iov
.iov_len
)) {
3017 ret
= bdrv_co_do_write_zeroes(bs
, cluster_sector_num
,
3018 cluster_nb_sectors
, 0);
3020 /* This does not change the data on the disk, it is not necessary
3021 * to flush even in cache=writethrough mode.
3023 ret
= drv
->bdrv_co_writev(bs
, cluster_sector_num
, cluster_nb_sectors
,
3028 /* It might be okay to ignore write errors for guest requests. If this
3029 * is a deliberate copy-on-read then we don't want to ignore the error.
3030 * Simply report it in all cases.
3035 skip_bytes
= (sector_num
- cluster_sector_num
) * BDRV_SECTOR_SIZE
;
3036 qemu_iovec_from_buf(qiov
, 0, bounce_buffer
+ skip_bytes
,
3037 nb_sectors
* BDRV_SECTOR_SIZE
);
3040 qemu_vfree(bounce_buffer
);
3045 * Forwards an already correctly aligned request to the BlockDriver. This
3046 * handles copy on read and zeroing after EOF; any other features must be
3047 * implemented by the caller.
3049 static int coroutine_fn
bdrv_aligned_preadv(BlockDriverState
*bs
,
3050 BdrvTrackedRequest
*req
, int64_t offset
, unsigned int bytes
,
3051 int64_t align
, QEMUIOVector
*qiov
, int flags
)
3053 BlockDriver
*drv
= bs
->drv
;
3056 int64_t sector_num
= offset
>> BDRV_SECTOR_BITS
;
3057 unsigned int nb_sectors
= bytes
>> BDRV_SECTOR_BITS
;
3059 assert((offset
& (BDRV_SECTOR_SIZE
- 1)) == 0);
3060 assert((bytes
& (BDRV_SECTOR_SIZE
- 1)) == 0);
3062 /* Handle Copy on Read and associated serialisation */
3063 if (flags
& BDRV_REQ_COPY_ON_READ
) {
3064 /* If we touch the same cluster it counts as an overlap. This
3065 * guarantees that allocating writes will be serialized and not race
3066 * with each other for the same cluster. For example, in copy-on-read
3067 * it ensures that the CoR read and write operations are atomic and
3068 * guest writes cannot interleave between them. */
3069 mark_request_serialising(req
, bdrv_get_cluster_size(bs
));
3072 wait_serialising_requests(req
);
3074 if (flags
& BDRV_REQ_COPY_ON_READ
) {
3077 ret
= bdrv_is_allocated(bs
, sector_num
, nb_sectors
, &pnum
);
3082 if (!ret
|| pnum
!= nb_sectors
) {
3083 ret
= bdrv_co_do_copy_on_readv(bs
, sector_num
, nb_sectors
, qiov
);
3088 /* Forward the request to the BlockDriver */
3089 if (!(bs
->zero_beyond_eof
&& bs
->growable
)) {
3090 ret
= drv
->bdrv_co_readv(bs
, sector_num
, nb_sectors
, qiov
);
3092 /* Read zeros after EOF of growable BDSes */
3093 int64_t len
, total_sectors
, max_nb_sectors
;
3095 len
= bdrv_getlength(bs
);
3101 total_sectors
= DIV_ROUND_UP(len
, BDRV_SECTOR_SIZE
);
3102 max_nb_sectors
= ROUND_UP(MAX(0, total_sectors
- sector_num
),
3103 align
>> BDRV_SECTOR_BITS
);
3104 if (max_nb_sectors
> 0) {
3105 ret
= drv
->bdrv_co_readv(bs
, sector_num
,
3106 MIN(nb_sectors
, max_nb_sectors
), qiov
);
3111 /* Reading beyond end of file is supposed to produce zeroes */
3112 if (ret
== 0 && total_sectors
< sector_num
+ nb_sectors
) {
3113 uint64_t offset
= MAX(0, total_sectors
- sector_num
);
3114 uint64_t bytes
= (sector_num
+ nb_sectors
- offset
) *
3116 qemu_iovec_memset(qiov
, offset
* BDRV_SECTOR_SIZE
, 0, bytes
);
3125 * Handle a read request in coroutine context
3127 static int coroutine_fn
bdrv_co_do_preadv(BlockDriverState
*bs
,
3128 int64_t offset
, unsigned int bytes
, QEMUIOVector
*qiov
,
3129 BdrvRequestFlags flags
)
3131 BlockDriver
*drv
= bs
->drv
;
3132 BdrvTrackedRequest req
;
3134 /* TODO Lift BDRV_SECTOR_SIZE restriction in BlockDriver interface */
3135 uint64_t align
= MAX(BDRV_SECTOR_SIZE
, bs
->request_alignment
);
3136 uint8_t *head_buf
= NULL
;
3137 uint8_t *tail_buf
= NULL
;
3138 QEMUIOVector local_qiov
;
3139 bool use_local_qiov
= false;
3145 if (bdrv_check_byte_request(bs
, offset
, bytes
)) {
3149 if (bs
->copy_on_read
) {
3150 flags
|= BDRV_REQ_COPY_ON_READ
;
3153 /* throttling disk I/O */
3154 if (bs
->io_limits_enabled
) {
3155 bdrv_io_limits_intercept(bs
, bytes
, false);
3158 /* Align read if necessary by padding qiov */
3159 if (offset
& (align
- 1)) {
3160 head_buf
= qemu_blockalign(bs
, align
);
3161 qemu_iovec_init(&local_qiov
, qiov
->niov
+ 2);
3162 qemu_iovec_add(&local_qiov
, head_buf
, offset
& (align
- 1));
3163 qemu_iovec_concat(&local_qiov
, qiov
, 0, qiov
->size
);
3164 use_local_qiov
= true;
3166 bytes
+= offset
& (align
- 1);
3167 offset
= offset
& ~(align
- 1);
3170 if ((offset
+ bytes
) & (align
- 1)) {
3171 if (!use_local_qiov
) {
3172 qemu_iovec_init(&local_qiov
, qiov
->niov
+ 1);
3173 qemu_iovec_concat(&local_qiov
, qiov
, 0, qiov
->size
);
3174 use_local_qiov
= true;
3176 tail_buf
= qemu_blockalign(bs
, align
);
3177 qemu_iovec_add(&local_qiov
, tail_buf
,
3178 align
- ((offset
+ bytes
) & (align
- 1)));
3180 bytes
= ROUND_UP(bytes
, align
);
3183 tracked_request_begin(&req
, bs
, offset
, bytes
, false);
3184 ret
= bdrv_aligned_preadv(bs
, &req
, offset
, bytes
, align
,
3185 use_local_qiov
? &local_qiov
: qiov
,
3187 tracked_request_end(&req
);
3189 if (use_local_qiov
) {
3190 qemu_iovec_destroy(&local_qiov
);
3191 qemu_vfree(head_buf
);
3192 qemu_vfree(tail_buf
);
3198 static int coroutine_fn
bdrv_co_do_readv(BlockDriverState
*bs
,
3199 int64_t sector_num
, int nb_sectors
, QEMUIOVector
*qiov
,
3200 BdrvRequestFlags flags
)
3202 if (nb_sectors
< 0 || nb_sectors
> (UINT_MAX
>> BDRV_SECTOR_BITS
)) {
3206 return bdrv_co_do_preadv(bs
, sector_num
<< BDRV_SECTOR_BITS
,
3207 nb_sectors
<< BDRV_SECTOR_BITS
, qiov
, flags
);
3210 int coroutine_fn
bdrv_co_readv(BlockDriverState
*bs
, int64_t sector_num
,
3211 int nb_sectors
, QEMUIOVector
*qiov
)
3213 trace_bdrv_co_readv(bs
, sector_num
, nb_sectors
);
3215 return bdrv_co_do_readv(bs
, sector_num
, nb_sectors
, qiov
, 0);
3218 int coroutine_fn
bdrv_co_copy_on_readv(BlockDriverState
*bs
,
3219 int64_t sector_num
, int nb_sectors
, QEMUIOVector
*qiov
)
3221 trace_bdrv_co_copy_on_readv(bs
, sector_num
, nb_sectors
);
3223 return bdrv_co_do_readv(bs
, sector_num
, nb_sectors
, qiov
,
3224 BDRV_REQ_COPY_ON_READ
);
3227 /* if no limit is specified in the BlockLimits use a default
3228 * of 32768 512-byte sectors (16 MiB) per request.
3230 #define MAX_WRITE_ZEROES_DEFAULT 32768
3232 static int coroutine_fn
bdrv_co_do_write_zeroes(BlockDriverState
*bs
,
3233 int64_t sector_num
, int nb_sectors
, BdrvRequestFlags flags
)
3235 BlockDriver
*drv
= bs
->drv
;
3237 struct iovec iov
= {0};
3240 int max_write_zeroes
= bs
->bl
.max_write_zeroes
?
3241 bs
->bl
.max_write_zeroes
: MAX_WRITE_ZEROES_DEFAULT
;
3243 while (nb_sectors
> 0 && !ret
) {
3244 int num
= nb_sectors
;
3246 /* Align request. Block drivers can expect the "bulk" of the request
3249 if (bs
->bl
.write_zeroes_alignment
3250 && num
> bs
->bl
.write_zeroes_alignment
) {
3251 if (sector_num
% bs
->bl
.write_zeroes_alignment
!= 0) {
3252 /* Make a small request up to the first aligned sector. */
3253 num
= bs
->bl
.write_zeroes_alignment
;
3254 num
-= sector_num
% bs
->bl
.write_zeroes_alignment
;
3255 } else if ((sector_num
+ num
) % bs
->bl
.write_zeroes_alignment
!= 0) {
3256 /* Shorten the request to the last aligned sector. num cannot
3257 * underflow because num > bs->bl.write_zeroes_alignment.
3259 num
-= (sector_num
+ num
) % bs
->bl
.write_zeroes_alignment
;
3263 /* limit request size */
3264 if (num
> max_write_zeroes
) {
3265 num
= max_write_zeroes
;
3269 /* First try the efficient write zeroes operation */
3270 if (drv
->bdrv_co_write_zeroes
) {
3271 ret
= drv
->bdrv_co_write_zeroes(bs
, sector_num
, num
, flags
);
3274 if (ret
== -ENOTSUP
) {
3275 /* Fall back to bounce buffer if write zeroes is unsupported */
3276 iov
.iov_len
= num
* BDRV_SECTOR_SIZE
;
3277 if (iov
.iov_base
== NULL
) {
3278 iov
.iov_base
= qemu_blockalign(bs
, num
* BDRV_SECTOR_SIZE
);
3279 memset(iov
.iov_base
, 0, num
* BDRV_SECTOR_SIZE
);
3281 qemu_iovec_init_external(&qiov
, &iov
, 1);
3283 ret
= drv
->bdrv_co_writev(bs
, sector_num
, num
, &qiov
);
3285 /* Keep bounce buffer around if it is big enough for all
3286 * all future requests.
3288 if (num
< max_write_zeroes
) {
3289 qemu_vfree(iov
.iov_base
);
3290 iov
.iov_base
= NULL
;
3298 qemu_vfree(iov
.iov_base
);
3303 * Forwards an already correctly aligned write request to the BlockDriver.
3305 static int coroutine_fn
bdrv_aligned_pwritev(BlockDriverState
*bs
,
3306 BdrvTrackedRequest
*req
, int64_t offset
, unsigned int bytes
,
3307 QEMUIOVector
*qiov
, int flags
)
3309 BlockDriver
*drv
= bs
->drv
;
3313 int64_t sector_num
= offset
>> BDRV_SECTOR_BITS
;
3314 unsigned int nb_sectors
= bytes
>> BDRV_SECTOR_BITS
;
3316 assert((offset
& (BDRV_SECTOR_SIZE
- 1)) == 0);
3317 assert((bytes
& (BDRV_SECTOR_SIZE
- 1)) == 0);
3319 waited
= wait_serialising_requests(req
);
3320 assert(!waited
|| !req
->serialising
);
3321 assert(req
->overlap_offset
<= offset
);
3322 assert(offset
+ bytes
<= req
->overlap_offset
+ req
->overlap_bytes
);
3324 ret
= notifier_with_return_list_notify(&bs
->before_write_notifiers
, req
);
3326 if (!ret
&& bs
->detect_zeroes
!= BLOCKDEV_DETECT_ZEROES_OPTIONS_OFF
&&
3327 !(flags
& BDRV_REQ_ZERO_WRITE
) && drv
->bdrv_co_write_zeroes
&&
3328 qemu_iovec_is_zero(qiov
)) {
3329 flags
|= BDRV_REQ_ZERO_WRITE
;
3330 if (bs
->detect_zeroes
== BLOCKDEV_DETECT_ZEROES_OPTIONS_UNMAP
) {
3331 flags
|= BDRV_REQ_MAY_UNMAP
;
3336 /* Do nothing, write notifier decided to fail this request */
3337 } else if (flags
& BDRV_REQ_ZERO_WRITE
) {
3338 BLKDBG_EVENT(bs
, BLKDBG_PWRITEV_ZERO
);
3339 ret
= bdrv_co_do_write_zeroes(bs
, sector_num
, nb_sectors
, flags
);
3341 BLKDBG_EVENT(bs
, BLKDBG_PWRITEV
);
3342 ret
= drv
->bdrv_co_writev(bs
, sector_num
, nb_sectors
, qiov
);
3344 BLKDBG_EVENT(bs
, BLKDBG_PWRITEV_DONE
);
3346 if (ret
== 0 && !bs
->enable_write_cache
) {
3347 ret
= bdrv_co_flush(bs
);
3350 bdrv_set_dirty(bs
, sector_num
, nb_sectors
);
3352 if (bs
->wr_highest_sector
< sector_num
+ nb_sectors
- 1) {
3353 bs
->wr_highest_sector
= sector_num
+ nb_sectors
- 1;
3355 if (bs
->growable
&& ret
>= 0) {
3356 bs
->total_sectors
= MAX(bs
->total_sectors
, sector_num
+ nb_sectors
);
3363 * Handle a write request in coroutine context
3365 static int coroutine_fn
bdrv_co_do_pwritev(BlockDriverState
*bs
,
3366 int64_t offset
, unsigned int bytes
, QEMUIOVector
*qiov
,
3367 BdrvRequestFlags flags
)
3369 BdrvTrackedRequest req
;
3370 /* TODO Lift BDRV_SECTOR_SIZE restriction in BlockDriver interface */
3371 uint64_t align
= MAX(BDRV_SECTOR_SIZE
, bs
->request_alignment
);
3372 uint8_t *head_buf
= NULL
;
3373 uint8_t *tail_buf
= NULL
;
3374 QEMUIOVector local_qiov
;
3375 bool use_local_qiov
= false;
3381 if (bs
->read_only
) {
3384 if (bdrv_check_byte_request(bs
, offset
, bytes
)) {
3388 /* throttling disk I/O */
3389 if (bs
->io_limits_enabled
) {
3390 bdrv_io_limits_intercept(bs
, bytes
, true);
3394 * Align write if necessary by performing a read-modify-write cycle.
3395 * Pad qiov with the read parts and be sure to have a tracked request not
3396 * only for bdrv_aligned_pwritev, but also for the reads of the RMW cycle.
3398 tracked_request_begin(&req
, bs
, offset
, bytes
, true);
3400 if (offset
& (align
- 1)) {
3401 QEMUIOVector head_qiov
;
3402 struct iovec head_iov
;
3404 mark_request_serialising(&req
, align
);
3405 wait_serialising_requests(&req
);
3407 head_buf
= qemu_blockalign(bs
, align
);
3408 head_iov
= (struct iovec
) {
3409 .iov_base
= head_buf
,
3412 qemu_iovec_init_external(&head_qiov
, &head_iov
, 1);
3414 BLKDBG_EVENT(bs
, BLKDBG_PWRITEV_RMW_HEAD
);
3415 ret
= bdrv_aligned_preadv(bs
, &req
, offset
& ~(align
- 1), align
,
3416 align
, &head_qiov
, 0);
3420 BLKDBG_EVENT(bs
, BLKDBG_PWRITEV_RMW_AFTER_HEAD
);
3422 qemu_iovec_init(&local_qiov
, qiov
->niov
+ 2);
3423 qemu_iovec_add(&local_qiov
, head_buf
, offset
& (align
- 1));
3424 qemu_iovec_concat(&local_qiov
, qiov
, 0, qiov
->size
);
3425 use_local_qiov
= true;
3427 bytes
+= offset
& (align
- 1);
3428 offset
= offset
& ~(align
- 1);
3431 if ((offset
+ bytes
) & (align
- 1)) {
3432 QEMUIOVector tail_qiov
;
3433 struct iovec tail_iov
;
3437 mark_request_serialising(&req
, align
);
3438 waited
= wait_serialising_requests(&req
);
3439 assert(!waited
|| !use_local_qiov
);
3441 tail_buf
= qemu_blockalign(bs
, align
);
3442 tail_iov
= (struct iovec
) {
3443 .iov_base
= tail_buf
,
3446 qemu_iovec_init_external(&tail_qiov
, &tail_iov
, 1);
3448 BLKDBG_EVENT(bs
, BLKDBG_PWRITEV_RMW_TAIL
);
3449 ret
= bdrv_aligned_preadv(bs
, &req
, (offset
+ bytes
) & ~(align
- 1), align
,
3450 align
, &tail_qiov
, 0);
3454 BLKDBG_EVENT(bs
, BLKDBG_PWRITEV_RMW_AFTER_TAIL
);
3456 if (!use_local_qiov
) {
3457 qemu_iovec_init(&local_qiov
, qiov
->niov
+ 1);
3458 qemu_iovec_concat(&local_qiov
, qiov
, 0, qiov
->size
);
3459 use_local_qiov
= true;
3462 tail_bytes
= (offset
+ bytes
) & (align
- 1);
3463 qemu_iovec_add(&local_qiov
, tail_buf
+ tail_bytes
, align
- tail_bytes
);
3465 bytes
= ROUND_UP(bytes
, align
);
3468 ret
= bdrv_aligned_pwritev(bs
, &req
, offset
, bytes
,
3469 use_local_qiov
? &local_qiov
: qiov
,
3473 tracked_request_end(&req
);
3475 if (use_local_qiov
) {
3476 qemu_iovec_destroy(&local_qiov
);
3478 qemu_vfree(head_buf
);
3479 qemu_vfree(tail_buf
);
3484 static int coroutine_fn
bdrv_co_do_writev(BlockDriverState
*bs
,
3485 int64_t sector_num
, int nb_sectors
, QEMUIOVector
*qiov
,
3486 BdrvRequestFlags flags
)
3488 if (nb_sectors
< 0 || nb_sectors
> (INT_MAX
>> BDRV_SECTOR_BITS
)) {
3492 return bdrv_co_do_pwritev(bs
, sector_num
<< BDRV_SECTOR_BITS
,
3493 nb_sectors
<< BDRV_SECTOR_BITS
, qiov
, flags
);
3496 int coroutine_fn
bdrv_co_writev(BlockDriverState
*bs
, int64_t sector_num
,
3497 int nb_sectors
, QEMUIOVector
*qiov
)
3499 trace_bdrv_co_writev(bs
, sector_num
, nb_sectors
);
3501 return bdrv_co_do_writev(bs
, sector_num
, nb_sectors
, qiov
, 0);
3504 int coroutine_fn
bdrv_co_write_zeroes(BlockDriverState
*bs
,
3505 int64_t sector_num
, int nb_sectors
,
3506 BdrvRequestFlags flags
)
3508 trace_bdrv_co_write_zeroes(bs
, sector_num
, nb_sectors
, flags
);
3510 if (!(bs
->open_flags
& BDRV_O_UNMAP
)) {
3511 flags
&= ~BDRV_REQ_MAY_UNMAP
;
3514 return bdrv_co_do_writev(bs
, sector_num
, nb_sectors
, NULL
,
3515 BDRV_REQ_ZERO_WRITE
| flags
);
3519 * Truncate file to 'offset' bytes (needed only for file protocols)
3521 int bdrv_truncate(BlockDriverState
*bs
, int64_t offset
)
3523 BlockDriver
*drv
= bs
->drv
;
3527 if (!drv
->bdrv_truncate
)
3531 if (bdrv_op_is_blocked(bs
, BLOCK_OP_TYPE_RESIZE
, NULL
)) {
3534 ret
= drv
->bdrv_truncate(bs
, offset
);
3536 ret
= refresh_total_sectors(bs
, offset
>> BDRV_SECTOR_BITS
);
3537 bdrv_dev_resize_cb(bs
);
3543 * Length of a allocated file in bytes. Sparse files are counted by actual
3544 * allocated space. Return < 0 if error or unknown.
3546 int64_t bdrv_get_allocated_file_size(BlockDriverState
*bs
)
3548 BlockDriver
*drv
= bs
->drv
;
3552 if (drv
->bdrv_get_allocated_file_size
) {
3553 return drv
->bdrv_get_allocated_file_size(bs
);
3556 return bdrv_get_allocated_file_size(bs
->file
);
3562 * Length of a file in bytes. Return < 0 if error or unknown.
3564 int64_t bdrv_getlength(BlockDriverState
*bs
)
3566 BlockDriver
*drv
= bs
->drv
;
3570 if (drv
->has_variable_length
) {
3571 int ret
= refresh_total_sectors(bs
, bs
->total_sectors
);
3576 return bs
->total_sectors
* BDRV_SECTOR_SIZE
;
3579 /* return 0 as number of sectors if no device present or error */
3580 void bdrv_get_geometry(BlockDriverState
*bs
, uint64_t *nb_sectors_ptr
)
3583 length
= bdrv_getlength(bs
);
3587 length
= length
>> BDRV_SECTOR_BITS
;
3588 *nb_sectors_ptr
= length
;
3591 void bdrv_set_on_error(BlockDriverState
*bs
, BlockdevOnError on_read_error
,
3592 BlockdevOnError on_write_error
)
3594 bs
->on_read_error
= on_read_error
;
3595 bs
->on_write_error
= on_write_error
;
3598 BlockdevOnError
bdrv_get_on_error(BlockDriverState
*bs
, bool is_read
)
3600 return is_read
? bs
->on_read_error
: bs
->on_write_error
;
3603 BlockErrorAction
bdrv_get_error_action(BlockDriverState
*bs
, bool is_read
, int error
)
3605 BlockdevOnError on_err
= is_read
? bs
->on_read_error
: bs
->on_write_error
;
3608 case BLOCKDEV_ON_ERROR_ENOSPC
:
3609 return (error
== ENOSPC
) ? BDRV_ACTION_STOP
: BDRV_ACTION_REPORT
;
3610 case BLOCKDEV_ON_ERROR_STOP
:
3611 return BDRV_ACTION_STOP
;
3612 case BLOCKDEV_ON_ERROR_REPORT
:
3613 return BDRV_ACTION_REPORT
;
3614 case BLOCKDEV_ON_ERROR_IGNORE
:
3615 return BDRV_ACTION_IGNORE
;
3621 /* This is done by device models because, while the block layer knows
3622 * about the error, it does not know whether an operation comes from
3623 * the device or the block layer (from a job, for example).
3625 void bdrv_error_action(BlockDriverState
*bs
, BlockErrorAction action
,
3626 bool is_read
, int error
)
3630 if (action
== BDRV_ACTION_STOP
) {
3631 /* First set the iostatus, so that "info block" returns an iostatus
3632 * that matches the events raised so far (an additional error iostatus
3633 * is fine, but not a lost one).
3635 bdrv_iostatus_set_err(bs
, error
);
3637 /* Then raise the request to stop the VM and the event.
3638 * qemu_system_vmstop_request_prepare has two effects. First,
3639 * it ensures that the STOP event always comes after the
3640 * BLOCK_IO_ERROR event. Second, it ensures that even if management
3641 * can observe the STOP event and do a "cont" before the STOP
3642 * event is issued, the VM will not stop. In this case, vm_start()
3643 * also ensures that the STOP/RESUME pair of events is emitted.
3645 qemu_system_vmstop_request_prepare();
3646 bdrv_emit_qmp_error_event(bs
, QEVENT_BLOCK_IO_ERROR
, action
, is_read
);
3647 qemu_system_vmstop_request(RUN_STATE_IO_ERROR
);
3649 bdrv_emit_qmp_error_event(bs
, QEVENT_BLOCK_IO_ERROR
, action
, is_read
);
3653 int bdrv_is_read_only(BlockDriverState
*bs
)
3655 return bs
->read_only
;
3658 int bdrv_is_sg(BlockDriverState
*bs
)
3663 int bdrv_enable_write_cache(BlockDriverState
*bs
)
3665 return bs
->enable_write_cache
;
3668 void bdrv_set_enable_write_cache(BlockDriverState
*bs
, bool wce
)
3670 bs
->enable_write_cache
= wce
;
3672 /* so a reopen() will preserve wce */
3674 bs
->open_flags
|= BDRV_O_CACHE_WB
;
3676 bs
->open_flags
&= ~BDRV_O_CACHE_WB
;
3680 int bdrv_is_encrypted(BlockDriverState
*bs
)
3682 if (bs
->backing_hd
&& bs
->backing_hd
->encrypted
)
3684 return bs
->encrypted
;
3687 int bdrv_key_required(BlockDriverState
*bs
)
3689 BlockDriverState
*backing_hd
= bs
->backing_hd
;
3691 if (backing_hd
&& backing_hd
->encrypted
&& !backing_hd
->valid_key
)
3693 return (bs
->encrypted
&& !bs
->valid_key
);
3696 int bdrv_set_key(BlockDriverState
*bs
, const char *key
)
3699 if (bs
->backing_hd
&& bs
->backing_hd
->encrypted
) {
3700 ret
= bdrv_set_key(bs
->backing_hd
, key
);
3706 if (!bs
->encrypted
) {
3708 } else if (!bs
->drv
|| !bs
->drv
->bdrv_set_key
) {
3711 ret
= bs
->drv
->bdrv_set_key(bs
, key
);
3714 } else if (!bs
->valid_key
) {
3716 /* call the change callback now, we skipped it on open */
3717 bdrv_dev_change_media_cb(bs
, true);
3722 const char *bdrv_get_format_name(BlockDriverState
*bs
)
3724 return bs
->drv
? bs
->drv
->format_name
: NULL
;
3727 void bdrv_iterate_format(void (*it
)(void *opaque
, const char *name
),
3732 const char **formats
= NULL
;
3734 QLIST_FOREACH(drv
, &bdrv_drivers
, list
) {
3735 if (drv
->format_name
) {
3738 while (formats
&& i
&& !found
) {
3739 found
= !strcmp(formats
[--i
], drv
->format_name
);
3743 formats
= g_realloc(formats
, (count
+ 1) * sizeof(char *));
3744 formats
[count
++] = drv
->format_name
;
3745 it(opaque
, drv
->format_name
);
3752 /* This function is to find block backend bs */
3753 BlockDriverState
*bdrv_find(const char *name
)
3755 BlockDriverState
*bs
;
3757 QTAILQ_FOREACH(bs
, &bdrv_states
, device_list
) {
3758 if (!strcmp(name
, bs
->device_name
)) {
3765 /* This function is to find a node in the bs graph */
3766 BlockDriverState
*bdrv_find_node(const char *node_name
)
3768 BlockDriverState
*bs
;
3772 QTAILQ_FOREACH(bs
, &graph_bdrv_states
, node_list
) {
3773 if (!strcmp(node_name
, bs
->node_name
)) {
3780 /* Put this QMP function here so it can access the static graph_bdrv_states. */
3781 BlockDeviceInfoList
*bdrv_named_nodes_list(void)
3783 BlockDeviceInfoList
*list
, *entry
;
3784 BlockDriverState
*bs
;
3787 QTAILQ_FOREACH(bs
, &graph_bdrv_states
, node_list
) {
3788 entry
= g_malloc0(sizeof(*entry
));
3789 entry
->value
= bdrv_block_device_info(bs
);
3797 BlockDriverState
*bdrv_lookup_bs(const char *device
,
3798 const char *node_name
,
3801 BlockDriverState
*bs
= NULL
;
3804 bs
= bdrv_find(device
);
3812 bs
= bdrv_find_node(node_name
);
3819 error_setg(errp
, "Cannot find device=%s nor node_name=%s",
3820 device
? device
: "",
3821 node_name
? node_name
: "");
3825 BlockDriverState
*bdrv_next(BlockDriverState
*bs
)
3828 return QTAILQ_FIRST(&bdrv_states
);
3830 return QTAILQ_NEXT(bs
, device_list
);
3833 void bdrv_iterate(void (*it
)(void *opaque
, BlockDriverState
*bs
), void *opaque
)
3835 BlockDriverState
*bs
;
3837 QTAILQ_FOREACH(bs
, &bdrv_states
, device_list
) {
3842 const char *bdrv_get_device_name(BlockDriverState
*bs
)
3844 return bs
->device_name
;
3847 int bdrv_get_flags(BlockDriverState
*bs
)
3849 return bs
->open_flags
;
3852 int bdrv_flush_all(void)
3854 BlockDriverState
*bs
;
3857 QTAILQ_FOREACH(bs
, &bdrv_states
, device_list
) {
3858 AioContext
*aio_context
= bdrv_get_aio_context(bs
);
3861 aio_context_acquire(aio_context
);
3862 ret
= bdrv_flush(bs
);
3863 if (ret
< 0 && !result
) {
3866 aio_context_release(aio_context
);
3872 int bdrv_has_zero_init_1(BlockDriverState
*bs
)
3877 int bdrv_has_zero_init(BlockDriverState
*bs
)
3881 /* If BS is a copy on write image, it is initialized to
3882 the contents of the base image, which may not be zeroes. */
3883 if (bs
->backing_hd
) {
3886 if (bs
->drv
->bdrv_has_zero_init
) {
3887 return bs
->drv
->bdrv_has_zero_init(bs
);
3894 bool bdrv_unallocated_blocks_are_zero(BlockDriverState
*bs
)
3896 BlockDriverInfo bdi
;
3898 if (bs
->backing_hd
) {
3902 if (bdrv_get_info(bs
, &bdi
) == 0) {
3903 return bdi
.unallocated_blocks_are_zero
;
3909 bool bdrv_can_write_zeroes_with_unmap(BlockDriverState
*bs
)
3911 BlockDriverInfo bdi
;
3913 if (bs
->backing_hd
|| !(bs
->open_flags
& BDRV_O_UNMAP
)) {
3917 if (bdrv_get_info(bs
, &bdi
) == 0) {
3918 return bdi
.can_write_zeroes_with_unmap
;
3924 typedef struct BdrvCoGetBlockStatusData
{
3925 BlockDriverState
*bs
;
3926 BlockDriverState
*base
;
3932 } BdrvCoGetBlockStatusData
;
3935 * Returns true iff the specified sector is present in the disk image. Drivers
3936 * not implementing the functionality are assumed to not support backing files,
3937 * hence all their sectors are reported as allocated.
3939 * If 'sector_num' is beyond the end of the disk image the return value is 0
3940 * and 'pnum' is set to 0.
3942 * 'pnum' is set to the number of sectors (including and immediately following
3943 * the specified sector) that are known to be in the same
3944 * allocated/unallocated state.
3946 * 'nb_sectors' is the max value 'pnum' should be set to. If nb_sectors goes
3947 * beyond the end of the disk image it will be clamped.
3949 static int64_t coroutine_fn
bdrv_co_get_block_status(BlockDriverState
*bs
,
3951 int nb_sectors
, int *pnum
)
3957 length
= bdrv_getlength(bs
);
3962 if (sector_num
>= (length
>> BDRV_SECTOR_BITS
)) {
3967 n
= bs
->total_sectors
- sector_num
;
3968 if (n
< nb_sectors
) {
3972 if (!bs
->drv
->bdrv_co_get_block_status
) {
3974 ret
= BDRV_BLOCK_DATA
| BDRV_BLOCK_ALLOCATED
;
3975 if (bs
->drv
->protocol_name
) {
3976 ret
|= BDRV_BLOCK_OFFSET_VALID
| (sector_num
* BDRV_SECTOR_SIZE
);
3981 ret
= bs
->drv
->bdrv_co_get_block_status(bs
, sector_num
, nb_sectors
, pnum
);
3987 if (ret
& BDRV_BLOCK_RAW
) {
3988 assert(ret
& BDRV_BLOCK_OFFSET_VALID
);
3989 return bdrv_get_block_status(bs
->file
, ret
>> BDRV_SECTOR_BITS
,
3993 if (ret
& (BDRV_BLOCK_DATA
| BDRV_BLOCK_ZERO
)) {
3994 ret
|= BDRV_BLOCK_ALLOCATED
;
3997 if (!(ret
& BDRV_BLOCK_DATA
) && !(ret
& BDRV_BLOCK_ZERO
)) {
3998 if (bdrv_unallocated_blocks_are_zero(bs
)) {
3999 ret
|= BDRV_BLOCK_ZERO
;
4000 } else if (bs
->backing_hd
) {
4001 BlockDriverState
*bs2
= bs
->backing_hd
;
4002 int64_t length2
= bdrv_getlength(bs2
);
4003 if (length2
>= 0 && sector_num
>= (length2
>> BDRV_SECTOR_BITS
)) {
4004 ret
|= BDRV_BLOCK_ZERO
;
4010 (ret
& BDRV_BLOCK_DATA
) && !(ret
& BDRV_BLOCK_ZERO
) &&
4011 (ret
& BDRV_BLOCK_OFFSET_VALID
)) {
4012 ret2
= bdrv_co_get_block_status(bs
->file
, ret
>> BDRV_SECTOR_BITS
,
4015 /* Ignore errors. This is just providing extra information, it
4016 * is useful but not necessary.
4018 ret
|= (ret2
& BDRV_BLOCK_ZERO
);
4025 /* Coroutine wrapper for bdrv_get_block_status() */
4026 static void coroutine_fn
bdrv_get_block_status_co_entry(void *opaque
)
4028 BdrvCoGetBlockStatusData
*data
= opaque
;
4029 BlockDriverState
*bs
= data
->bs
;
4031 data
->ret
= bdrv_co_get_block_status(bs
, data
->sector_num
, data
->nb_sectors
,
4037 * Synchronous wrapper around bdrv_co_get_block_status().
4039 * See bdrv_co_get_block_status() for details.
4041 int64_t bdrv_get_block_status(BlockDriverState
*bs
, int64_t sector_num
,
4042 int nb_sectors
, int *pnum
)
4045 BdrvCoGetBlockStatusData data
= {
4047 .sector_num
= sector_num
,
4048 .nb_sectors
= nb_sectors
,
4053 if (qemu_in_coroutine()) {
4054 /* Fast-path if already in coroutine context */
4055 bdrv_get_block_status_co_entry(&data
);
4057 AioContext
*aio_context
= bdrv_get_aio_context(bs
);
4059 co
= qemu_coroutine_create(bdrv_get_block_status_co_entry
);
4060 qemu_coroutine_enter(co
, &data
);
4061 while (!data
.done
) {
4062 aio_poll(aio_context
, true);
4068 int coroutine_fn
bdrv_is_allocated(BlockDriverState
*bs
, int64_t sector_num
,
4069 int nb_sectors
, int *pnum
)
4071 int64_t ret
= bdrv_get_block_status(bs
, sector_num
, nb_sectors
, pnum
);
4075 return (ret
& BDRV_BLOCK_ALLOCATED
);
4079 * Given an image chain: ... -> [BASE] -> [INTER1] -> [INTER2] -> [TOP]
4081 * Return true if the given sector is allocated in any image between
4082 * BASE and TOP (inclusive). BASE can be NULL to check if the given
4083 * sector is allocated in any image of the chain. Return false otherwise.
4085 * 'pnum' is set to the number of sectors (including and immediately following
4086 * the specified sector) that are known to be in the same
4087 * allocated/unallocated state.
4090 int bdrv_is_allocated_above(BlockDriverState
*top
,
4091 BlockDriverState
*base
,
4093 int nb_sectors
, int *pnum
)
4095 BlockDriverState
*intermediate
;
4096 int ret
, n
= nb_sectors
;
4099 while (intermediate
&& intermediate
!= base
) {
4101 ret
= bdrv_is_allocated(intermediate
, sector_num
, nb_sectors
,
4111 * [sector_num, nb_sectors] is unallocated on top but intermediate
4114 * [sector_num+x, nr_sectors] allocated.
4116 if (n
> pnum_inter
&&
4117 (intermediate
== top
||
4118 sector_num
+ pnum_inter
< intermediate
->total_sectors
)) {
4122 intermediate
= intermediate
->backing_hd
;
4129 const char *bdrv_get_encrypted_filename(BlockDriverState
*bs
)
4131 if (bs
->backing_hd
&& bs
->backing_hd
->encrypted
)
4132 return bs
->backing_file
;
4133 else if (bs
->encrypted
)
4134 return bs
->filename
;
4139 void bdrv_get_backing_filename(BlockDriverState
*bs
,
4140 char *filename
, int filename_size
)
4142 pstrcpy(filename
, filename_size
, bs
->backing_file
);
4145 int bdrv_write_compressed(BlockDriverState
*bs
, int64_t sector_num
,
4146 const uint8_t *buf
, int nb_sectors
)
4148 BlockDriver
*drv
= bs
->drv
;
4151 if (!drv
->bdrv_write_compressed
)
4153 if (bdrv_check_request(bs
, sector_num
, nb_sectors
))
4156 assert(QLIST_EMPTY(&bs
->dirty_bitmaps
));
4158 return drv
->bdrv_write_compressed(bs
, sector_num
, buf
, nb_sectors
);
4161 int bdrv_get_info(BlockDriverState
*bs
, BlockDriverInfo
*bdi
)
4163 BlockDriver
*drv
= bs
->drv
;
4166 if (!drv
->bdrv_get_info
)
4168 memset(bdi
, 0, sizeof(*bdi
));
4169 return drv
->bdrv_get_info(bs
, bdi
);
4172 ImageInfoSpecific
*bdrv_get_specific_info(BlockDriverState
*bs
)
4174 BlockDriver
*drv
= bs
->drv
;
4175 if (drv
&& drv
->bdrv_get_specific_info
) {
4176 return drv
->bdrv_get_specific_info(bs
);
4181 int bdrv_save_vmstate(BlockDriverState
*bs
, const uint8_t *buf
,
4182 int64_t pos
, int size
)
4185 struct iovec iov
= {
4186 .iov_base
= (void *) buf
,
4190 qemu_iovec_init_external(&qiov
, &iov
, 1);
4191 return bdrv_writev_vmstate(bs
, &qiov
, pos
);
4194 int bdrv_writev_vmstate(BlockDriverState
*bs
, QEMUIOVector
*qiov
, int64_t pos
)
4196 BlockDriver
*drv
= bs
->drv
;
4200 } else if (drv
->bdrv_save_vmstate
) {
4201 return drv
->bdrv_save_vmstate(bs
, qiov
, pos
);
4202 } else if (bs
->file
) {
4203 return bdrv_writev_vmstate(bs
->file
, qiov
, pos
);
4209 int bdrv_load_vmstate(BlockDriverState
*bs
, uint8_t *buf
,
4210 int64_t pos
, int size
)
4212 BlockDriver
*drv
= bs
->drv
;
4215 if (drv
->bdrv_load_vmstate
)
4216 return drv
->bdrv_load_vmstate(bs
, buf
, pos
, size
);
4218 return bdrv_load_vmstate(bs
->file
, buf
, pos
, size
);
4222 void bdrv_debug_event(BlockDriverState
*bs
, BlkDebugEvent event
)
4224 if (!bs
|| !bs
->drv
|| !bs
->drv
->bdrv_debug_event
) {
4228 bs
->drv
->bdrv_debug_event(bs
, event
);
4231 int bdrv_debug_breakpoint(BlockDriverState
*bs
, const char *event
,
4234 while (bs
&& bs
->drv
&& !bs
->drv
->bdrv_debug_breakpoint
) {
4238 if (bs
&& bs
->drv
&& bs
->drv
->bdrv_debug_breakpoint
) {
4239 return bs
->drv
->bdrv_debug_breakpoint(bs
, event
, tag
);
4245 int bdrv_debug_remove_breakpoint(BlockDriverState
*bs
, const char *tag
)
4247 while (bs
&& bs
->drv
&& !bs
->drv
->bdrv_debug_remove_breakpoint
) {
4251 if (bs
&& bs
->drv
&& bs
->drv
->bdrv_debug_remove_breakpoint
) {
4252 return bs
->drv
->bdrv_debug_remove_breakpoint(bs
, tag
);
4258 int bdrv_debug_resume(BlockDriverState
*bs
, const char *tag
)
4260 while (bs
&& (!bs
->drv
|| !bs
->drv
->bdrv_debug_resume
)) {
4264 if (bs
&& bs
->drv
&& bs
->drv
->bdrv_debug_resume
) {
4265 return bs
->drv
->bdrv_debug_resume(bs
, tag
);
4271 bool bdrv_debug_is_suspended(BlockDriverState
*bs
, const char *tag
)
4273 while (bs
&& bs
->drv
&& !bs
->drv
->bdrv_debug_is_suspended
) {
4277 if (bs
&& bs
->drv
&& bs
->drv
->bdrv_debug_is_suspended
) {
4278 return bs
->drv
->bdrv_debug_is_suspended(bs
, tag
);
4284 int bdrv_is_snapshot(BlockDriverState
*bs
)
4286 return !!(bs
->open_flags
& BDRV_O_SNAPSHOT
);
4289 /* backing_file can either be relative, or absolute, or a protocol. If it is
4290 * relative, it must be relative to the chain. So, passing in bs->filename
4291 * from a BDS as backing_file should not be done, as that may be relative to
4292 * the CWD rather than the chain. */
4293 BlockDriverState
*bdrv_find_backing_image(BlockDriverState
*bs
,
4294 const char *backing_file
)
4296 char *filename_full
= NULL
;
4297 char *backing_file_full
= NULL
;
4298 char *filename_tmp
= NULL
;
4299 int is_protocol
= 0;
4300 BlockDriverState
*curr_bs
= NULL
;
4301 BlockDriverState
*retval
= NULL
;
4303 if (!bs
|| !bs
->drv
|| !backing_file
) {
4307 filename_full
= g_malloc(PATH_MAX
);
4308 backing_file_full
= g_malloc(PATH_MAX
);
4309 filename_tmp
= g_malloc(PATH_MAX
);
4311 is_protocol
= path_has_protocol(backing_file
);
4313 for (curr_bs
= bs
; curr_bs
->backing_hd
; curr_bs
= curr_bs
->backing_hd
) {
4315 /* If either of the filename paths is actually a protocol, then
4316 * compare unmodified paths; otherwise make paths relative */
4317 if (is_protocol
|| path_has_protocol(curr_bs
->backing_file
)) {
4318 if (strcmp(backing_file
, curr_bs
->backing_file
) == 0) {
4319 retval
= curr_bs
->backing_hd
;
4323 /* If not an absolute filename path, make it relative to the current
4324 * image's filename path */
4325 path_combine(filename_tmp
, PATH_MAX
, curr_bs
->filename
,
4328 /* We are going to compare absolute pathnames */
4329 if (!realpath(filename_tmp
, filename_full
)) {
4333 /* We need to make sure the backing filename we are comparing against
4334 * is relative to the current image filename (or absolute) */
4335 path_combine(filename_tmp
, PATH_MAX
, curr_bs
->filename
,
4336 curr_bs
->backing_file
);
4338 if (!realpath(filename_tmp
, backing_file_full
)) {
4342 if (strcmp(backing_file_full
, filename_full
) == 0) {
4343 retval
= curr_bs
->backing_hd
;
4349 g_free(filename_full
);
4350 g_free(backing_file_full
);
4351 g_free(filename_tmp
);
4355 int bdrv_get_backing_file_depth(BlockDriverState
*bs
)
4361 if (!bs
->backing_hd
) {
4365 return 1 + bdrv_get_backing_file_depth(bs
->backing_hd
);
4368 BlockDriverState
*bdrv_find_base(BlockDriverState
*bs
)
4370 BlockDriverState
*curr_bs
= NULL
;
4378 while (curr_bs
->backing_hd
) {
4379 curr_bs
= curr_bs
->backing_hd
;
4384 /**************************************************************/
4387 BlockDriverAIOCB
*bdrv_aio_readv(BlockDriverState
*bs
, int64_t sector_num
,
4388 QEMUIOVector
*qiov
, int nb_sectors
,
4389 BlockDriverCompletionFunc
*cb
, void *opaque
)
4391 trace_bdrv_aio_readv(bs
, sector_num
, nb_sectors
, opaque
);
4393 return bdrv_co_aio_rw_vector(bs
, sector_num
, qiov
, nb_sectors
, 0,
4397 BlockDriverAIOCB
*bdrv_aio_writev(BlockDriverState
*bs
, int64_t sector_num
,
4398 QEMUIOVector
*qiov
, int nb_sectors
,
4399 BlockDriverCompletionFunc
*cb
, void *opaque
)
4401 trace_bdrv_aio_writev(bs
, sector_num
, nb_sectors
, opaque
);
4403 return bdrv_co_aio_rw_vector(bs
, sector_num
, qiov
, nb_sectors
, 0,
4407 BlockDriverAIOCB
*bdrv_aio_write_zeroes(BlockDriverState
*bs
,
4408 int64_t sector_num
, int nb_sectors
, BdrvRequestFlags flags
,
4409 BlockDriverCompletionFunc
*cb
, void *opaque
)
4411 trace_bdrv_aio_write_zeroes(bs
, sector_num
, nb_sectors
, flags
, opaque
);
4413 return bdrv_co_aio_rw_vector(bs
, sector_num
, NULL
, nb_sectors
,
4414 BDRV_REQ_ZERO_WRITE
| flags
,
4419 typedef struct MultiwriteCB
{
4424 BlockDriverCompletionFunc
*cb
;
4426 QEMUIOVector
*free_qiov
;
4430 static void multiwrite_user_cb(MultiwriteCB
*mcb
)
4434 for (i
= 0; i
< mcb
->num_callbacks
; i
++) {
4435 mcb
->callbacks
[i
].cb(mcb
->callbacks
[i
].opaque
, mcb
->error
);
4436 if (mcb
->callbacks
[i
].free_qiov
) {
4437 qemu_iovec_destroy(mcb
->callbacks
[i
].free_qiov
);
4439 g_free(mcb
->callbacks
[i
].free_qiov
);
4443 static void multiwrite_cb(void *opaque
, int ret
)
4445 MultiwriteCB
*mcb
= opaque
;
4447 trace_multiwrite_cb(mcb
, ret
);
4449 if (ret
< 0 && !mcb
->error
) {
4453 mcb
->num_requests
--;
4454 if (mcb
->num_requests
== 0) {
4455 multiwrite_user_cb(mcb
);
4460 static int multiwrite_req_compare(const void *a
, const void *b
)
4462 const BlockRequest
*req1
= a
, *req2
= b
;
4465 * Note that we can't simply subtract req2->sector from req1->sector
4466 * here as that could overflow the return value.
4468 if (req1
->sector
> req2
->sector
) {
4470 } else if (req1
->sector
< req2
->sector
) {
4478 * Takes a bunch of requests and tries to merge them. Returns the number of
4479 * requests that remain after merging.
4481 static int multiwrite_merge(BlockDriverState
*bs
, BlockRequest
*reqs
,
4482 int num_reqs
, MultiwriteCB
*mcb
)
4486 // Sort requests by start sector
4487 qsort(reqs
, num_reqs
, sizeof(*reqs
), &multiwrite_req_compare
);
4489 // Check if adjacent requests touch the same clusters. If so, combine them,
4490 // filling up gaps with zero sectors.
4492 for (i
= 1; i
< num_reqs
; i
++) {
4494 int64_t oldreq_last
= reqs
[outidx
].sector
+ reqs
[outidx
].nb_sectors
;
4496 // Handle exactly sequential writes and overlapping writes.
4497 if (reqs
[i
].sector
<= oldreq_last
) {
4501 if (reqs
[outidx
].qiov
->niov
+ reqs
[i
].qiov
->niov
+ 1 > IOV_MAX
) {
4507 QEMUIOVector
*qiov
= g_malloc0(sizeof(*qiov
));
4508 qemu_iovec_init(qiov
,
4509 reqs
[outidx
].qiov
->niov
+ reqs
[i
].qiov
->niov
+ 1);
4511 // Add the first request to the merged one. If the requests are
4512 // overlapping, drop the last sectors of the first request.
4513 size
= (reqs
[i
].sector
- reqs
[outidx
].sector
) << 9;
4514 qemu_iovec_concat(qiov
, reqs
[outidx
].qiov
, 0, size
);
4516 // We should need to add any zeros between the two requests
4517 assert (reqs
[i
].sector
<= oldreq_last
);
4519 // Add the second request
4520 qemu_iovec_concat(qiov
, reqs
[i
].qiov
, 0, reqs
[i
].qiov
->size
);
4522 reqs
[outidx
].nb_sectors
= qiov
->size
>> 9;
4523 reqs
[outidx
].qiov
= qiov
;
4525 mcb
->callbacks
[i
].free_qiov
= reqs
[outidx
].qiov
;
4528 reqs
[outidx
].sector
= reqs
[i
].sector
;
4529 reqs
[outidx
].nb_sectors
= reqs
[i
].nb_sectors
;
4530 reqs
[outidx
].qiov
= reqs
[i
].qiov
;
4538 * Submit multiple AIO write requests at once.
4540 * On success, the function returns 0 and all requests in the reqs array have
4541 * been submitted. In error case this function returns -1, and any of the
4542 * requests may or may not be submitted yet. In particular, this means that the
4543 * callback will be called for some of the requests, for others it won't. The
4544 * caller must check the error field of the BlockRequest to wait for the right
4545 * callbacks (if error != 0, no callback will be called).
4547 * The implementation may modify the contents of the reqs array, e.g. to merge
4548 * requests. However, the fields opaque and error are left unmodified as they
4549 * are used to signal failure for a single request to the caller.
4551 int bdrv_aio_multiwrite(BlockDriverState
*bs
, BlockRequest
*reqs
, int num_reqs
)
4556 /* don't submit writes if we don't have a medium */
4557 if (bs
->drv
== NULL
) {
4558 for (i
= 0; i
< num_reqs
; i
++) {
4559 reqs
[i
].error
= -ENOMEDIUM
;
4564 if (num_reqs
== 0) {
4568 // Create MultiwriteCB structure
4569 mcb
= g_malloc0(sizeof(*mcb
) + num_reqs
* sizeof(*mcb
->callbacks
));
4570 mcb
->num_requests
= 0;
4571 mcb
->num_callbacks
= num_reqs
;
4573 for (i
= 0; i
< num_reqs
; i
++) {
4574 mcb
->callbacks
[i
].cb
= reqs
[i
].cb
;
4575 mcb
->callbacks
[i
].opaque
= reqs
[i
].opaque
;
4578 // Check for mergable requests
4579 num_reqs
= multiwrite_merge(bs
, reqs
, num_reqs
, mcb
);
4581 trace_bdrv_aio_multiwrite(mcb
, mcb
->num_callbacks
, num_reqs
);
4583 /* Run the aio requests. */
4584 mcb
->num_requests
= num_reqs
;
4585 for (i
= 0; i
< num_reqs
; i
++) {
4586 bdrv_co_aio_rw_vector(bs
, reqs
[i
].sector
, reqs
[i
].qiov
,
4587 reqs
[i
].nb_sectors
, reqs
[i
].flags
,
4595 void bdrv_aio_cancel(BlockDriverAIOCB
*acb
)
4597 acb
->aiocb_info
->cancel(acb
);
4600 /**************************************************************/
4601 /* async block device emulation */
4603 typedef struct BlockDriverAIOCBSync
{
4604 BlockDriverAIOCB common
;
4607 /* vector translation state */
4611 } BlockDriverAIOCBSync
;
4613 static void bdrv_aio_cancel_em(BlockDriverAIOCB
*blockacb
)
4615 BlockDriverAIOCBSync
*acb
=
4616 container_of(blockacb
, BlockDriverAIOCBSync
, common
);
4617 qemu_bh_delete(acb
->bh
);
4619 qemu_aio_release(acb
);
4622 static const AIOCBInfo bdrv_em_aiocb_info
= {
4623 .aiocb_size
= sizeof(BlockDriverAIOCBSync
),
4624 .cancel
= bdrv_aio_cancel_em
,
4627 static void bdrv_aio_bh_cb(void *opaque
)
4629 BlockDriverAIOCBSync
*acb
= opaque
;
4632 qemu_iovec_from_buf(acb
->qiov
, 0, acb
->bounce
, acb
->qiov
->size
);
4633 qemu_vfree(acb
->bounce
);
4634 acb
->common
.cb(acb
->common
.opaque
, acb
->ret
);
4635 qemu_bh_delete(acb
->bh
);
4637 qemu_aio_release(acb
);
4640 static BlockDriverAIOCB
*bdrv_aio_rw_vector(BlockDriverState
*bs
,
4644 BlockDriverCompletionFunc
*cb
,
4649 BlockDriverAIOCBSync
*acb
;
4651 acb
= qemu_aio_get(&bdrv_em_aiocb_info
, bs
, cb
, opaque
);
4652 acb
->is_write
= is_write
;
4654 acb
->bounce
= qemu_blockalign(bs
, qiov
->size
);
4655 acb
->bh
= aio_bh_new(bdrv_get_aio_context(bs
), bdrv_aio_bh_cb
, acb
);
4658 qemu_iovec_to_buf(acb
->qiov
, 0, acb
->bounce
, qiov
->size
);
4659 acb
->ret
= bs
->drv
->bdrv_write(bs
, sector_num
, acb
->bounce
, nb_sectors
);
4661 acb
->ret
= bs
->drv
->bdrv_read(bs
, sector_num
, acb
->bounce
, nb_sectors
);
4664 qemu_bh_schedule(acb
->bh
);
4666 return &acb
->common
;
4669 static BlockDriverAIOCB
*bdrv_aio_readv_em(BlockDriverState
*bs
,
4670 int64_t sector_num
, QEMUIOVector
*qiov
, int nb_sectors
,
4671 BlockDriverCompletionFunc
*cb
, void *opaque
)
4673 return bdrv_aio_rw_vector(bs
, sector_num
, qiov
, nb_sectors
, cb
, opaque
, 0);
4676 static BlockDriverAIOCB
*bdrv_aio_writev_em(BlockDriverState
*bs
,
4677 int64_t sector_num
, QEMUIOVector
*qiov
, int nb_sectors
,
4678 BlockDriverCompletionFunc
*cb
, void *opaque
)
4680 return bdrv_aio_rw_vector(bs
, sector_num
, qiov
, nb_sectors
, cb
, opaque
, 1);
4684 typedef struct BlockDriverAIOCBCoroutine
{
4685 BlockDriverAIOCB common
;
4690 } BlockDriverAIOCBCoroutine
;
4692 static void bdrv_aio_co_cancel_em(BlockDriverAIOCB
*blockacb
)
4694 AioContext
*aio_context
= bdrv_get_aio_context(blockacb
->bs
);
4695 BlockDriverAIOCBCoroutine
*acb
=
4696 container_of(blockacb
, BlockDriverAIOCBCoroutine
, common
);
4701 aio_poll(aio_context
, true);
4705 static const AIOCBInfo bdrv_em_co_aiocb_info
= {
4706 .aiocb_size
= sizeof(BlockDriverAIOCBCoroutine
),
4707 .cancel
= bdrv_aio_co_cancel_em
,
4710 static void bdrv_co_em_bh(void *opaque
)
4712 BlockDriverAIOCBCoroutine
*acb
= opaque
;
4714 acb
->common
.cb(acb
->common
.opaque
, acb
->req
.error
);
4720 qemu_bh_delete(acb
->bh
);
4721 qemu_aio_release(acb
);
4724 /* Invoke bdrv_co_do_readv/bdrv_co_do_writev */
4725 static void coroutine_fn
bdrv_co_do_rw(void *opaque
)
4727 BlockDriverAIOCBCoroutine
*acb
= opaque
;
4728 BlockDriverState
*bs
= acb
->common
.bs
;
4730 if (!acb
->is_write
) {
4731 acb
->req
.error
= bdrv_co_do_readv(bs
, acb
->req
.sector
,
4732 acb
->req
.nb_sectors
, acb
->req
.qiov
, acb
->req
.flags
);
4734 acb
->req
.error
= bdrv_co_do_writev(bs
, acb
->req
.sector
,
4735 acb
->req
.nb_sectors
, acb
->req
.qiov
, acb
->req
.flags
);
4738 acb
->bh
= aio_bh_new(bdrv_get_aio_context(bs
), bdrv_co_em_bh
, acb
);
4739 qemu_bh_schedule(acb
->bh
);
4742 static BlockDriverAIOCB
*bdrv_co_aio_rw_vector(BlockDriverState
*bs
,
4746 BdrvRequestFlags flags
,
4747 BlockDriverCompletionFunc
*cb
,
4752 BlockDriverAIOCBCoroutine
*acb
;
4754 acb
= qemu_aio_get(&bdrv_em_co_aiocb_info
, bs
, cb
, opaque
);
4755 acb
->req
.sector
= sector_num
;
4756 acb
->req
.nb_sectors
= nb_sectors
;
4757 acb
->req
.qiov
= qiov
;
4758 acb
->req
.flags
= flags
;
4759 acb
->is_write
= is_write
;
4762 co
= qemu_coroutine_create(bdrv_co_do_rw
);
4763 qemu_coroutine_enter(co
, acb
);
4765 return &acb
->common
;
4768 static void coroutine_fn
bdrv_aio_flush_co_entry(void *opaque
)
4770 BlockDriverAIOCBCoroutine
*acb
= opaque
;
4771 BlockDriverState
*bs
= acb
->common
.bs
;
4773 acb
->req
.error
= bdrv_co_flush(bs
);
4774 acb
->bh
= aio_bh_new(bdrv_get_aio_context(bs
), bdrv_co_em_bh
, acb
);
4775 qemu_bh_schedule(acb
->bh
);
4778 BlockDriverAIOCB
*bdrv_aio_flush(BlockDriverState
*bs
,
4779 BlockDriverCompletionFunc
*cb
, void *opaque
)
4781 trace_bdrv_aio_flush(bs
, opaque
);
4784 BlockDriverAIOCBCoroutine
*acb
;
4786 acb
= qemu_aio_get(&bdrv_em_co_aiocb_info
, bs
, cb
, opaque
);
4789 co
= qemu_coroutine_create(bdrv_aio_flush_co_entry
);
4790 qemu_coroutine_enter(co
, acb
);
4792 return &acb
->common
;
4795 static void coroutine_fn
bdrv_aio_discard_co_entry(void *opaque
)
4797 BlockDriverAIOCBCoroutine
*acb
= opaque
;
4798 BlockDriverState
*bs
= acb
->common
.bs
;
4800 acb
->req
.error
= bdrv_co_discard(bs
, acb
->req
.sector
, acb
->req
.nb_sectors
);
4801 acb
->bh
= aio_bh_new(bdrv_get_aio_context(bs
), bdrv_co_em_bh
, acb
);
4802 qemu_bh_schedule(acb
->bh
);
4805 BlockDriverAIOCB
*bdrv_aio_discard(BlockDriverState
*bs
,
4806 int64_t sector_num
, int nb_sectors
,
4807 BlockDriverCompletionFunc
*cb
, void *opaque
)
4810 BlockDriverAIOCBCoroutine
*acb
;
4812 trace_bdrv_aio_discard(bs
, sector_num
, nb_sectors
, opaque
);
4814 acb
= qemu_aio_get(&bdrv_em_co_aiocb_info
, bs
, cb
, opaque
);
4815 acb
->req
.sector
= sector_num
;
4816 acb
->req
.nb_sectors
= nb_sectors
;
4818 co
= qemu_coroutine_create(bdrv_aio_discard_co_entry
);
4819 qemu_coroutine_enter(co
, acb
);
4821 return &acb
->common
;
4824 void bdrv_init(void)
4826 module_call_init(MODULE_INIT_BLOCK
);
4829 void bdrv_init_with_whitelist(void)
4831 use_bdrv_whitelist
= 1;
4835 void *qemu_aio_get(const AIOCBInfo
*aiocb_info
, BlockDriverState
*bs
,
4836 BlockDriverCompletionFunc
*cb
, void *opaque
)
4838 BlockDriverAIOCB
*acb
;
4840 acb
= g_slice_alloc(aiocb_info
->aiocb_size
);
4841 acb
->aiocb_info
= aiocb_info
;
4844 acb
->opaque
= opaque
;
4848 void qemu_aio_release(void *p
)
4850 BlockDriverAIOCB
*acb
= p
;
4851 g_slice_free1(acb
->aiocb_info
->aiocb_size
, acb
);
4854 /**************************************************************/
4855 /* Coroutine block device emulation */
4857 typedef struct CoroutineIOCompletion
{
4858 Coroutine
*coroutine
;
4860 } CoroutineIOCompletion
;
4862 static void bdrv_co_io_em_complete(void *opaque
, int ret
)
4864 CoroutineIOCompletion
*co
= opaque
;
4867 qemu_coroutine_enter(co
->coroutine
, NULL
);
4870 static int coroutine_fn
bdrv_co_io_em(BlockDriverState
*bs
, int64_t sector_num
,
4871 int nb_sectors
, QEMUIOVector
*iov
,
4874 CoroutineIOCompletion co
= {
4875 .coroutine
= qemu_coroutine_self(),
4877 BlockDriverAIOCB
*acb
;
4880 acb
= bs
->drv
->bdrv_aio_writev(bs
, sector_num
, iov
, nb_sectors
,
4881 bdrv_co_io_em_complete
, &co
);
4883 acb
= bs
->drv
->bdrv_aio_readv(bs
, sector_num
, iov
, nb_sectors
,
4884 bdrv_co_io_em_complete
, &co
);
4887 trace_bdrv_co_io_em(bs
, sector_num
, nb_sectors
, is_write
, acb
);
4891 qemu_coroutine_yield();
4896 static int coroutine_fn
bdrv_co_readv_em(BlockDriverState
*bs
,
4897 int64_t sector_num
, int nb_sectors
,
4900 return bdrv_co_io_em(bs
, sector_num
, nb_sectors
, iov
, false);
4903 static int coroutine_fn
bdrv_co_writev_em(BlockDriverState
*bs
,
4904 int64_t sector_num
, int nb_sectors
,
4907 return bdrv_co_io_em(bs
, sector_num
, nb_sectors
, iov
, true);
4910 static void coroutine_fn
bdrv_flush_co_entry(void *opaque
)
4912 RwCo
*rwco
= opaque
;
4914 rwco
->ret
= bdrv_co_flush(rwco
->bs
);
4917 int coroutine_fn
bdrv_co_flush(BlockDriverState
*bs
)
4921 if (!bs
|| !bdrv_is_inserted(bs
) || bdrv_is_read_only(bs
)) {
4925 /* Write back cached data to the OS even with cache=unsafe */
4926 BLKDBG_EVENT(bs
->file
, BLKDBG_FLUSH_TO_OS
);
4927 if (bs
->drv
->bdrv_co_flush_to_os
) {
4928 ret
= bs
->drv
->bdrv_co_flush_to_os(bs
);
4934 /* But don't actually force it to the disk with cache=unsafe */
4935 if (bs
->open_flags
& BDRV_O_NO_FLUSH
) {
4939 BLKDBG_EVENT(bs
->file
, BLKDBG_FLUSH_TO_DISK
);
4940 if (bs
->drv
->bdrv_co_flush_to_disk
) {
4941 ret
= bs
->drv
->bdrv_co_flush_to_disk(bs
);
4942 } else if (bs
->drv
->bdrv_aio_flush
) {
4943 BlockDriverAIOCB
*acb
;
4944 CoroutineIOCompletion co
= {
4945 .coroutine
= qemu_coroutine_self(),
4948 acb
= bs
->drv
->bdrv_aio_flush(bs
, bdrv_co_io_em_complete
, &co
);
4952 qemu_coroutine_yield();
4957 * Some block drivers always operate in either writethrough or unsafe
4958 * mode and don't support bdrv_flush therefore. Usually qemu doesn't
4959 * know how the server works (because the behaviour is hardcoded or
4960 * depends on server-side configuration), so we can't ensure that
4961 * everything is safe on disk. Returning an error doesn't work because
4962 * that would break guests even if the server operates in writethrough
4965 * Let's hope the user knows what he's doing.
4973 /* Now flush the underlying protocol. It will also have BDRV_O_NO_FLUSH
4974 * in the case of cache=unsafe, so there are no useless flushes.
4977 return bdrv_co_flush(bs
->file
);
4980 void bdrv_invalidate_cache(BlockDriverState
*bs
, Error
**errp
)
4982 Error
*local_err
= NULL
;
4989 if (bs
->drv
->bdrv_invalidate_cache
) {
4990 bs
->drv
->bdrv_invalidate_cache(bs
, &local_err
);
4991 } else if (bs
->file
) {
4992 bdrv_invalidate_cache(bs
->file
, &local_err
);
4995 error_propagate(errp
, local_err
);
4999 ret
= refresh_total_sectors(bs
, bs
->total_sectors
);
5001 error_setg_errno(errp
, -ret
, "Could not refresh total sector count");
5006 void bdrv_invalidate_cache_all(Error
**errp
)
5008 BlockDriverState
*bs
;
5009 Error
*local_err
= NULL
;
5011 QTAILQ_FOREACH(bs
, &bdrv_states
, device_list
) {
5012 AioContext
*aio_context
= bdrv_get_aio_context(bs
);
5014 aio_context_acquire(aio_context
);
5015 bdrv_invalidate_cache(bs
, &local_err
);
5016 aio_context_release(aio_context
);
5018 error_propagate(errp
, local_err
);
5024 void bdrv_clear_incoming_migration_all(void)
5026 BlockDriverState
*bs
;
5028 QTAILQ_FOREACH(bs
, &bdrv_states
, device_list
) {
5029 AioContext
*aio_context
= bdrv_get_aio_context(bs
);
5031 aio_context_acquire(aio_context
);
5032 bs
->open_flags
= bs
->open_flags
& ~(BDRV_O_INCOMING
);
5033 aio_context_release(aio_context
);
5037 int bdrv_flush(BlockDriverState
*bs
)
5045 if (qemu_in_coroutine()) {
5046 /* Fast-path if already in coroutine context */
5047 bdrv_flush_co_entry(&rwco
);
5049 AioContext
*aio_context
= bdrv_get_aio_context(bs
);
5051 co
= qemu_coroutine_create(bdrv_flush_co_entry
);
5052 qemu_coroutine_enter(co
, &rwco
);
5053 while (rwco
.ret
== NOT_DONE
) {
5054 aio_poll(aio_context
, true);
5061 typedef struct DiscardCo
{
5062 BlockDriverState
*bs
;
5067 static void coroutine_fn
bdrv_discard_co_entry(void *opaque
)
5069 DiscardCo
*rwco
= opaque
;
5071 rwco
->ret
= bdrv_co_discard(rwco
->bs
, rwco
->sector_num
, rwco
->nb_sectors
);
5074 /* if no limit is specified in the BlockLimits use a default
5075 * of 32768 512-byte sectors (16 MiB) per request.
5077 #define MAX_DISCARD_DEFAULT 32768
5079 int coroutine_fn
bdrv_co_discard(BlockDriverState
*bs
, int64_t sector_num
,
5086 } else if (bdrv_check_request(bs
, sector_num
, nb_sectors
)) {
5088 } else if (bs
->read_only
) {
5092 bdrv_reset_dirty(bs
, sector_num
, nb_sectors
);
5094 /* Do nothing if disabled. */
5095 if (!(bs
->open_flags
& BDRV_O_UNMAP
)) {
5099 if (!bs
->drv
->bdrv_co_discard
&& !bs
->drv
->bdrv_aio_discard
) {
5103 max_discard
= bs
->bl
.max_discard
? bs
->bl
.max_discard
: MAX_DISCARD_DEFAULT
;
5104 while (nb_sectors
> 0) {
5106 int num
= nb_sectors
;
5109 if (bs
->bl
.discard_alignment
&&
5110 num
>= bs
->bl
.discard_alignment
&&
5111 sector_num
% bs
->bl
.discard_alignment
) {
5112 if (num
> bs
->bl
.discard_alignment
) {
5113 num
= bs
->bl
.discard_alignment
;
5115 num
-= sector_num
% bs
->bl
.discard_alignment
;
5118 /* limit request size */
5119 if (num
> max_discard
) {
5123 if (bs
->drv
->bdrv_co_discard
) {
5124 ret
= bs
->drv
->bdrv_co_discard(bs
, sector_num
, num
);
5126 BlockDriverAIOCB
*acb
;
5127 CoroutineIOCompletion co
= {
5128 .coroutine
= qemu_coroutine_self(),
5131 acb
= bs
->drv
->bdrv_aio_discard(bs
, sector_num
, nb_sectors
,
5132 bdrv_co_io_em_complete
, &co
);
5136 qemu_coroutine_yield();
5140 if (ret
&& ret
!= -ENOTSUP
) {
5150 int bdrv_discard(BlockDriverState
*bs
, int64_t sector_num
, int nb_sectors
)
5155 .sector_num
= sector_num
,
5156 .nb_sectors
= nb_sectors
,
5160 if (qemu_in_coroutine()) {
5161 /* Fast-path if already in coroutine context */
5162 bdrv_discard_co_entry(&rwco
);
5164 AioContext
*aio_context
= bdrv_get_aio_context(bs
);
5166 co
= qemu_coroutine_create(bdrv_discard_co_entry
);
5167 qemu_coroutine_enter(co
, &rwco
);
5168 while (rwco
.ret
== NOT_DONE
) {
5169 aio_poll(aio_context
, true);
5176 /**************************************************************/
5177 /* removable device support */
5180 * Return TRUE if the media is present
5182 int bdrv_is_inserted(BlockDriverState
*bs
)
5184 BlockDriver
*drv
= bs
->drv
;
5188 if (!drv
->bdrv_is_inserted
)
5190 return drv
->bdrv_is_inserted(bs
);
5194 * Return whether the media changed since the last call to this
5195 * function, or -ENOTSUP if we don't know. Most drivers don't know.
5197 int bdrv_media_changed(BlockDriverState
*bs
)
5199 BlockDriver
*drv
= bs
->drv
;
5201 if (drv
&& drv
->bdrv_media_changed
) {
5202 return drv
->bdrv_media_changed(bs
);
5208 * If eject_flag is TRUE, eject the media. Otherwise, close the tray
5210 void bdrv_eject(BlockDriverState
*bs
, bool eject_flag
)
5212 BlockDriver
*drv
= bs
->drv
;
5214 if (drv
&& drv
->bdrv_eject
) {
5215 drv
->bdrv_eject(bs
, eject_flag
);
5218 if (bs
->device_name
[0] != '\0') {
5219 bdrv_emit_qmp_eject_event(bs
, eject_flag
);
5224 * Lock or unlock the media (if it is locked, the user won't be able
5225 * to eject it manually).
5227 void bdrv_lock_medium(BlockDriverState
*bs
, bool locked
)
5229 BlockDriver
*drv
= bs
->drv
;
5231 trace_bdrv_lock_medium(bs
, locked
);
5233 if (drv
&& drv
->bdrv_lock_medium
) {
5234 drv
->bdrv_lock_medium(bs
, locked
);
5238 /* needed for generic scsi interface */
5240 int bdrv_ioctl(BlockDriverState
*bs
, unsigned long int req
, void *buf
)
5242 BlockDriver
*drv
= bs
->drv
;
5244 if (drv
&& drv
->bdrv_ioctl
)
5245 return drv
->bdrv_ioctl(bs
, req
, buf
);
5249 BlockDriverAIOCB
*bdrv_aio_ioctl(BlockDriverState
*bs
,
5250 unsigned long int req
, void *buf
,
5251 BlockDriverCompletionFunc
*cb
, void *opaque
)
5253 BlockDriver
*drv
= bs
->drv
;
5255 if (drv
&& drv
->bdrv_aio_ioctl
)
5256 return drv
->bdrv_aio_ioctl(bs
, req
, buf
, cb
, opaque
);
5260 void bdrv_set_guest_block_size(BlockDriverState
*bs
, int align
)
5262 bs
->guest_block_size
= align
;
5265 void *qemu_blockalign(BlockDriverState
*bs
, size_t size
)
5267 return qemu_memalign(bdrv_opt_mem_align(bs
), size
);
5271 * Check if all memory in this vector is sector aligned.
5273 bool bdrv_qiov_is_aligned(BlockDriverState
*bs
, QEMUIOVector
*qiov
)
5276 size_t alignment
= bdrv_opt_mem_align(bs
);
5278 for (i
= 0; i
< qiov
->niov
; i
++) {
5279 if ((uintptr_t) qiov
->iov
[i
].iov_base
% alignment
) {
5282 if (qiov
->iov
[i
].iov_len
% alignment
) {
5290 BdrvDirtyBitmap
*bdrv_create_dirty_bitmap(BlockDriverState
*bs
, int granularity
,
5293 int64_t bitmap_size
;
5294 BdrvDirtyBitmap
*bitmap
;
5296 assert((granularity
& (granularity
- 1)) == 0);
5298 granularity
>>= BDRV_SECTOR_BITS
;
5299 assert(granularity
);
5300 bitmap_size
= bdrv_getlength(bs
);
5301 if (bitmap_size
< 0) {
5302 error_setg_errno(errp
, -bitmap_size
, "could not get length of device");
5303 errno
= -bitmap_size
;
5306 bitmap_size
>>= BDRV_SECTOR_BITS
;
5307 bitmap
= g_malloc0(sizeof(BdrvDirtyBitmap
));
5308 bitmap
->bitmap
= hbitmap_alloc(bitmap_size
, ffs(granularity
) - 1);
5309 QLIST_INSERT_HEAD(&bs
->dirty_bitmaps
, bitmap
, list
);
5313 void bdrv_release_dirty_bitmap(BlockDriverState
*bs
, BdrvDirtyBitmap
*bitmap
)
5315 BdrvDirtyBitmap
*bm
, *next
;
5316 QLIST_FOREACH_SAFE(bm
, &bs
->dirty_bitmaps
, list
, next
) {
5318 QLIST_REMOVE(bitmap
, list
);
5319 hbitmap_free(bitmap
->bitmap
);
5326 BlockDirtyInfoList
*bdrv_query_dirty_bitmaps(BlockDriverState
*bs
)
5328 BdrvDirtyBitmap
*bm
;
5329 BlockDirtyInfoList
*list
= NULL
;
5330 BlockDirtyInfoList
**plist
= &list
;
5332 QLIST_FOREACH(bm
, &bs
->dirty_bitmaps
, list
) {
5333 BlockDirtyInfo
*info
= g_malloc0(sizeof(BlockDirtyInfo
));
5334 BlockDirtyInfoList
*entry
= g_malloc0(sizeof(BlockDirtyInfoList
));
5335 info
->count
= bdrv_get_dirty_count(bs
, bm
);
5337 ((int64_t) BDRV_SECTOR_SIZE
<< hbitmap_granularity(bm
->bitmap
));
5338 entry
->value
= info
;
5340 plist
= &entry
->next
;
5346 int bdrv_get_dirty(BlockDriverState
*bs
, BdrvDirtyBitmap
*bitmap
, int64_t sector
)
5349 return hbitmap_get(bitmap
->bitmap
, sector
);
5355 void bdrv_dirty_iter_init(BlockDriverState
*bs
,
5356 BdrvDirtyBitmap
*bitmap
, HBitmapIter
*hbi
)
5358 hbitmap_iter_init(hbi
, bitmap
->bitmap
, 0);
5361 void bdrv_set_dirty(BlockDriverState
*bs
, int64_t cur_sector
,
5364 BdrvDirtyBitmap
*bitmap
;
5365 QLIST_FOREACH(bitmap
, &bs
->dirty_bitmaps
, list
) {
5366 hbitmap_set(bitmap
->bitmap
, cur_sector
, nr_sectors
);
5370 void bdrv_reset_dirty(BlockDriverState
*bs
, int64_t cur_sector
, int nr_sectors
)
5372 BdrvDirtyBitmap
*bitmap
;
5373 QLIST_FOREACH(bitmap
, &bs
->dirty_bitmaps
, list
) {
5374 hbitmap_reset(bitmap
->bitmap
, cur_sector
, nr_sectors
);
5378 int64_t bdrv_get_dirty_count(BlockDriverState
*bs
, BdrvDirtyBitmap
*bitmap
)
5380 return hbitmap_count(bitmap
->bitmap
);
5383 /* Get a reference to bs */
5384 void bdrv_ref(BlockDriverState
*bs
)
5389 /* Release a previously grabbed reference to bs.
5390 * If after releasing, reference count is zero, the BlockDriverState is
5392 void bdrv_unref(BlockDriverState
*bs
)
5394 assert(bs
->refcnt
> 0);
5395 if (--bs
->refcnt
== 0) {
5400 struct BdrvOpBlocker
{
5402 QLIST_ENTRY(BdrvOpBlocker
) list
;
5405 bool bdrv_op_is_blocked(BlockDriverState
*bs
, BlockOpType op
, Error
**errp
)
5407 BdrvOpBlocker
*blocker
;
5408 assert((int) op
>= 0 && op
< BLOCK_OP_TYPE_MAX
);
5409 if (!QLIST_EMPTY(&bs
->op_blockers
[op
])) {
5410 blocker
= QLIST_FIRST(&bs
->op_blockers
[op
]);
5412 error_setg(errp
, "Device '%s' is busy: %s",
5413 bs
->device_name
, error_get_pretty(blocker
->reason
));
5420 void bdrv_op_block(BlockDriverState
*bs
, BlockOpType op
, Error
*reason
)
5422 BdrvOpBlocker
*blocker
;
5423 assert((int) op
>= 0 && op
< BLOCK_OP_TYPE_MAX
);
5425 blocker
= g_malloc0(sizeof(BdrvOpBlocker
));
5426 blocker
->reason
= reason
;
5427 QLIST_INSERT_HEAD(&bs
->op_blockers
[op
], blocker
, list
);
5430 void bdrv_op_unblock(BlockDriverState
*bs
, BlockOpType op
, Error
*reason
)
5432 BdrvOpBlocker
*blocker
, *next
;
5433 assert((int) op
>= 0 && op
< BLOCK_OP_TYPE_MAX
);
5434 QLIST_FOREACH_SAFE(blocker
, &bs
->op_blockers
[op
], list
, next
) {
5435 if (blocker
->reason
== reason
) {
5436 QLIST_REMOVE(blocker
, list
);
5442 void bdrv_op_block_all(BlockDriverState
*bs
, Error
*reason
)
5445 for (i
= 0; i
< BLOCK_OP_TYPE_MAX
; i
++) {
5446 bdrv_op_block(bs
, i
, reason
);
5450 void bdrv_op_unblock_all(BlockDriverState
*bs
, Error
*reason
)
5453 for (i
= 0; i
< BLOCK_OP_TYPE_MAX
; i
++) {
5454 bdrv_op_unblock(bs
, i
, reason
);
5458 bool bdrv_op_blocker_is_empty(BlockDriverState
*bs
)
5462 for (i
= 0; i
< BLOCK_OP_TYPE_MAX
; i
++) {
5463 if (!QLIST_EMPTY(&bs
->op_blockers
[i
])) {
5470 void bdrv_iostatus_enable(BlockDriverState
*bs
)
5472 bs
->iostatus_enabled
= true;
5473 bs
->iostatus
= BLOCK_DEVICE_IO_STATUS_OK
;
5476 /* The I/O status is only enabled if the drive explicitly
5477 * enables it _and_ the VM is configured to stop on errors */
5478 bool bdrv_iostatus_is_enabled(const BlockDriverState
*bs
)
5480 return (bs
->iostatus_enabled
&&
5481 (bs
->on_write_error
== BLOCKDEV_ON_ERROR_ENOSPC
||
5482 bs
->on_write_error
== BLOCKDEV_ON_ERROR_STOP
||
5483 bs
->on_read_error
== BLOCKDEV_ON_ERROR_STOP
));
5486 void bdrv_iostatus_disable(BlockDriverState
*bs
)
5488 bs
->iostatus_enabled
= false;
5491 void bdrv_iostatus_reset(BlockDriverState
*bs
)
5493 if (bdrv_iostatus_is_enabled(bs
)) {
5494 bs
->iostatus
= BLOCK_DEVICE_IO_STATUS_OK
;
5496 block_job_iostatus_reset(bs
->job
);
5501 void bdrv_iostatus_set_err(BlockDriverState
*bs
, int error
)
5503 assert(bdrv_iostatus_is_enabled(bs
));
5504 if (bs
->iostatus
== BLOCK_DEVICE_IO_STATUS_OK
) {
5505 bs
->iostatus
= error
== ENOSPC
? BLOCK_DEVICE_IO_STATUS_NOSPACE
:
5506 BLOCK_DEVICE_IO_STATUS_FAILED
;
5511 bdrv_acct_start(BlockDriverState
*bs
, BlockAcctCookie
*cookie
, int64_t bytes
,
5512 enum BlockAcctType type
)
5514 assert(type
< BDRV_MAX_IOTYPE
);
5516 cookie
->bytes
= bytes
;
5517 cookie
->start_time_ns
= get_clock();
5518 cookie
->type
= type
;
5522 bdrv_acct_done(BlockDriverState
*bs
, BlockAcctCookie
*cookie
)
5524 assert(cookie
->type
< BDRV_MAX_IOTYPE
);
5526 bs
->nr_bytes
[cookie
->type
] += cookie
->bytes
;
5527 bs
->nr_ops
[cookie
->type
]++;
5528 bs
->total_time_ns
[cookie
->type
] += get_clock() - cookie
->start_time_ns
;
5531 void bdrv_img_create(const char *filename
, const char *fmt
,
5532 const char *base_filename
, const char *base_fmt
,
5533 char *options
, uint64_t img_size
, int flags
,
5534 Error
**errp
, bool quiet
)
5536 QemuOptsList
*create_opts
= NULL
;
5537 QemuOpts
*opts
= NULL
;
5538 const char *backing_fmt
, *backing_file
;
5540 BlockDriver
*drv
, *proto_drv
;
5541 BlockDriver
*backing_drv
= NULL
;
5542 Error
*local_err
= NULL
;
5545 /* Find driver and parse its options */
5546 drv
= bdrv_find_format(fmt
);
5548 error_setg(errp
, "Unknown file format '%s'", fmt
);
5552 proto_drv
= bdrv_find_protocol(filename
, true);
5554 error_setg(errp
, "Unknown protocol '%s'", filename
);
5558 create_opts
= qemu_opts_append(create_opts
, drv
->create_opts
);
5559 create_opts
= qemu_opts_append(create_opts
, proto_drv
->create_opts
);
5561 /* Create parameter list with default values */
5562 opts
= qemu_opts_create(create_opts
, NULL
, 0, &error_abort
);
5563 qemu_opt_set_number(opts
, BLOCK_OPT_SIZE
, img_size
);
5565 /* Parse -o options */
5567 if (qemu_opts_do_parse(opts
, options
, NULL
) != 0) {
5568 error_setg(errp
, "Invalid options for file format '%s'", fmt
);
5573 if (base_filename
) {
5574 if (qemu_opt_set(opts
, BLOCK_OPT_BACKING_FILE
, base_filename
)) {
5575 error_setg(errp
, "Backing file not supported for file format '%s'",
5582 if (qemu_opt_set(opts
, BLOCK_OPT_BACKING_FMT
, base_fmt
)) {
5583 error_setg(errp
, "Backing file format not supported for file "
5584 "format '%s'", fmt
);
5589 backing_file
= qemu_opt_get(opts
, BLOCK_OPT_BACKING_FILE
);
5591 if (!strcmp(filename
, backing_file
)) {
5592 error_setg(errp
, "Error: Trying to create an image with the "
5593 "same filename as the backing file");
5598 backing_fmt
= qemu_opt_get(opts
, BLOCK_OPT_BACKING_FMT
);
5600 backing_drv
= bdrv_find_format(backing_fmt
);
5602 error_setg(errp
, "Unknown backing file format '%s'",
5608 // The size for the image must always be specified, with one exception:
5609 // If we are using a backing file, we can obtain the size from there
5610 size
= qemu_opt_get_size(opts
, BLOCK_OPT_SIZE
, 0);
5613 BlockDriverState
*bs
;
5618 /* backing files always opened read-only */
5620 flags
& ~(BDRV_O_RDWR
| BDRV_O_SNAPSHOT
| BDRV_O_NO_BACKING
);
5623 ret
= bdrv_open(&bs
, backing_file
, NULL
, NULL
, back_flags
,
5624 backing_drv
, &local_err
);
5626 error_setg_errno(errp
, -ret
, "Could not open '%s': %s",
5628 error_get_pretty(local_err
));
5629 error_free(local_err
);
5633 bdrv_get_geometry(bs
, &size
);
5636 snprintf(buf
, sizeof(buf
), "%" PRId64
, size
);
5637 qemu_opt_set_number(opts
, BLOCK_OPT_SIZE
, size
);
5641 error_setg(errp
, "Image creation needs a size parameter");
5647 printf("Formatting '%s', fmt=%s ", filename
, fmt
);
5648 qemu_opts_print(opts
);
5652 ret
= bdrv_create(drv
, filename
, opts
, &local_err
);
5654 if (ret
== -EFBIG
) {
5655 /* This is generally a better message than whatever the driver would
5656 * deliver (especially because of the cluster_size_hint), since that
5657 * is most probably not much different from "image too large". */
5658 const char *cluster_size_hint
= "";
5659 if (qemu_opt_get_size(opts
, BLOCK_OPT_CLUSTER_SIZE
, 0)) {
5660 cluster_size_hint
= " (try using a larger cluster size)";
5662 error_setg(errp
, "The image size is too large for file format '%s'"
5663 "%s", fmt
, cluster_size_hint
);
5664 error_free(local_err
);
5669 qemu_opts_del(opts
);
5670 qemu_opts_free(create_opts
);
5672 error_propagate(errp
, local_err
);
5676 AioContext
*bdrv_get_aio_context(BlockDriverState
*bs
)
5678 return bs
->aio_context
;
5681 void bdrv_detach_aio_context(BlockDriverState
*bs
)
5687 if (bs
->io_limits_enabled
) {
5688 throttle_detach_aio_context(&bs
->throttle_state
);
5690 if (bs
->drv
->bdrv_detach_aio_context
) {
5691 bs
->drv
->bdrv_detach_aio_context(bs
);
5694 bdrv_detach_aio_context(bs
->file
);
5696 if (bs
->backing_hd
) {
5697 bdrv_detach_aio_context(bs
->backing_hd
);
5700 bs
->aio_context
= NULL
;
5703 void bdrv_attach_aio_context(BlockDriverState
*bs
,
5704 AioContext
*new_context
)
5710 bs
->aio_context
= new_context
;
5712 if (bs
->backing_hd
) {
5713 bdrv_attach_aio_context(bs
->backing_hd
, new_context
);
5716 bdrv_attach_aio_context(bs
->file
, new_context
);
5718 if (bs
->drv
->bdrv_attach_aio_context
) {
5719 bs
->drv
->bdrv_attach_aio_context(bs
, new_context
);
5721 if (bs
->io_limits_enabled
) {
5722 throttle_attach_aio_context(&bs
->throttle_state
, new_context
);
5726 void bdrv_set_aio_context(BlockDriverState
*bs
, AioContext
*new_context
)
5728 bdrv_drain_all(); /* ensure there are no in-flight requests */
5730 bdrv_detach_aio_context(bs
);
5732 /* This function executes in the old AioContext so acquire the new one in
5733 * case it runs in a different thread.
5735 aio_context_acquire(new_context
);
5736 bdrv_attach_aio_context(bs
, new_context
);
5737 aio_context_release(new_context
);
5740 void bdrv_add_before_write_notifier(BlockDriverState
*bs
,
5741 NotifierWithReturn
*notifier
)
5743 notifier_with_return_list_add(&bs
->before_write_notifiers
, notifier
);
5746 int bdrv_amend_options(BlockDriverState
*bs
, QemuOpts
*opts
)
5748 if (!bs
->drv
->bdrv_amend_options
) {
5751 return bs
->drv
->bdrv_amend_options(bs
, opts
);
5754 /* This function will be called by the bdrv_recurse_is_first_non_filter method
5755 * of block filter and by bdrv_is_first_non_filter.
5756 * It is used to test if the given bs is the candidate or recurse more in the
5759 bool bdrv_recurse_is_first_non_filter(BlockDriverState
*bs
,
5760 BlockDriverState
*candidate
)
5762 /* return false if basic checks fails */
5763 if (!bs
|| !bs
->drv
) {
5767 /* the code reached a non block filter driver -> check if the bs is
5768 * the same as the candidate. It's the recursion termination condition.
5770 if (!bs
->drv
->is_filter
) {
5771 return bs
== candidate
;
5773 /* Down this path the driver is a block filter driver */
5775 /* If the block filter recursion method is defined use it to recurse down
5778 if (bs
->drv
->bdrv_recurse_is_first_non_filter
) {
5779 return bs
->drv
->bdrv_recurse_is_first_non_filter(bs
, candidate
);
5782 /* the driver is a block filter but don't allow to recurse -> return false
5787 /* This function checks if the candidate is the first non filter bs down it's
5788 * bs chain. Since we don't have pointers to parents it explore all bs chains
5789 * from the top. Some filters can choose not to pass down the recursion.
5791 bool bdrv_is_first_non_filter(BlockDriverState
*candidate
)
5793 BlockDriverState
*bs
;
5795 /* walk down the bs forest recursively */
5796 QTAILQ_FOREACH(bs
, &bdrv_states
, device_list
) {
5799 /* try to recurse in this top level bs */
5800 perm
= bdrv_recurse_is_first_non_filter(bs
, candidate
);
5802 /* candidate is the first non filter */