hw/ppc440_bamboo.c

   1 /*
   2  * Qemu PowerPC 440 Bamboo board emulation
   3  *
   4  * Copyright 2007 IBM Corporation.
   5  * Authors:
   6  *      Jerone Young <jyoung5@us.ibm.com>
   7  *      Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
   8  *      Hollis Blanchard <hollisb@us.ibm.com>
   9  *
  10  * This work is licensed under the GNU GPL license version 2 or later.
  11  *
  12  */
  13
  14 #include "config.h"
  15 #include "qemu-common.h"
  16 #include "net.h"
  17 #include "hw.h"
  18 #include "pci.h"
  19 #include "boards.h"
  20 #include "kvm.h"
  21 #include "kvm_ppc.h"
  22 #include "device_tree.h"
  23 #include "loader.h"
  24 #include "elf.h"
  25 #include "exec-memory.h"
  26 #include "pc.h"
  27 #include "ppc.h"
  28 #include "ppc405.h"
  29 #include "sysemu.h"
  30 #include "sysbus.h"
  31
  32 #define BINARY_DEVICE_TREE_FILE "bamboo.dtb"
  33
  34 /* from u-boot */
  35 #define KERNEL_ADDR  0x1000000
  36 #define FDT_ADDR     0x1800000
  37 #define RAMDISK_ADDR 0x1900000
  38
  39 #define PPC440EP_PCI_CONFIG     0xeec00000
  40 #define PPC440EP_PCI_INTACK     0xeed00000
  41 #define PPC440EP_PCI_SPECIAL    0xeed00000
  42 #define PPC440EP_PCI_REGS       0xef400000
  43 #define PPC440EP_PCI_IO         0xe8000000
  44 #define PPC440EP_PCI_IOLEN      0x00010000
  45
  46 #define PPC440EP_SDRAM_NR_BANKS 4
  47
  48 static const unsigned int ppc440ep_sdram_bank_sizes[] = {
  49     256<<20, 128<<20, 64<<20, 32<<20, 16<<20, 8<<20, 0
  50 };
  51
  52 static target_phys_addr_t entry;
  53
  54 static int bamboo_load_device_tree(target_phys_addr_t addr,
  55                                      uint32_t ramsize,
  56                                      target_phys_addr_t initrd_base,
  57                                      target_phys_addr_t initrd_size,
  58                                      const char *kernel_cmdline)
  59 {
  60     int ret = -1;
  61 #ifdef CONFIG_FDT
  62     uint32_t mem_reg_property[] = { 0, 0, ramsize };
  63     char *filename;
  64     int fdt_size;
  65     void *fdt;
  66     uint32_t tb_freq = 400000000;
  67     uint32_t clock_freq = 400000000;
  68
  69     filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, BINARY_DEVICE_TREE_FILE);
  70     if (!filename) {
  71         goto out;
  72     }
  73     fdt = load_device_tree(filename, &fdt_size);
  74     g_free(filename);
  75     if (fdt == NULL) {
  76         goto out;
  77     }
  78
  79     /* Manipulate device tree in memory. */
  80
  81     ret = qemu_devtree_setprop(fdt, "/memory", "reg", mem_reg_property,
  82                                sizeof(mem_reg_property));
  83     if (ret < 0)
  84         fprintf(stderr, "couldn't set /memory/reg\n");
  85
  86     ret = qemu_devtree_setprop_cell(fdt, "/chosen", "linux,initrd-start",
  87                                     initrd_base);
  88     if (ret < 0)
  89         fprintf(stderr, "couldn't set /chosen/linux,initrd-start\n");
  90
  91     ret = qemu_devtree_setprop_cell(fdt, "/chosen", "linux,initrd-end",
  92                                     (initrd_base + initrd_size));
  93     if (ret < 0)
  94         fprintf(stderr, "couldn't set /chosen/linux,initrd-end\n");
  95
  96     ret = qemu_devtree_setprop_string(fdt, "/chosen", "bootargs",
  97                                       kernel_cmdline);
  98     if (ret < 0)
  99         fprintf(stderr, "couldn't set /chosen/bootargs\n");
 100
 101     /* Copy data from the host device tree into the guest. Since the guest can
 102      * directly access the timebase without host involvement, we must expose
 103      * the correct frequencies. */
 104     if (kvm_enabled()) {
 105         tb_freq = kvmppc_get_tbfreq();
 106         clock_freq = kvmppc_get_clockfreq();
 107     }
 108
 109     qemu_devtree_setprop_cell(fdt, "/cpus/cpu@0", "clock-frequency",
 110                               clock_freq);
 111     qemu_devtree_setprop_cell(fdt, "/cpus/cpu@0", "timebase-frequency",
 112                               tb_freq);
 113
 114     ret = rom_add_blob_fixed(BINARY_DEVICE_TREE_FILE, fdt, fdt_size, addr);
 115     g_free(fdt);
 116
 117 out:
 118 #endif
 119
 120     return ret;
 121 }
 122
 123 /* Create reset TLB entries for BookE, spanning the 32bit addr space.  */
 124 static void mmubooke_create_initial_mapping(CPUPPCState *env,
 125                                      target_ulong va,
 126                                      target_phys_addr_t pa)
 127 {
 128     ppcemb_tlb_t *tlb = &env->tlb.tlbe[0];
 129
 130     tlb->attr = 0;
 131     tlb->prot = PAGE_VALID | ((PAGE_READ | PAGE_WRITE | PAGE_EXEC) << 4);
 132     tlb->size = 1 << 31; /* up to 0x80000000  */
 133     tlb->EPN = va & TARGET_PAGE_MASK;
 134     tlb->RPN = pa & TARGET_PAGE_MASK;
 135     tlb->PID = 0;
 136
 137     tlb = &env->tlb.tlbe[1];
 138     tlb->attr = 0;
 139     tlb->prot = PAGE_VALID | ((PAGE_READ | PAGE_WRITE | PAGE_EXEC) << 4);
 140     tlb->size = 1 << 31; /* up to 0xffffffff  */
 141     tlb->EPN = 0x80000000 & TARGET_PAGE_MASK;
 142     tlb->RPN = 0x80000000 & TARGET_PAGE_MASK;
 143     tlb->PID = 0;
 144 }
 145
 146 static void main_cpu_reset(void *opaque)
 147 {
 148     CPUPPCState *env = opaque;
 149
 150     cpu_state_reset(env);
 151     env->gpr[1] = (16<<20) - 8;
 152     env->gpr[3] = FDT_ADDR;
 153     env->nip = entry;
 154
 155     /* Create a mapping for the kernel.  */
 156     mmubooke_create_initial_mapping(env, 0, 0);
 157 }
 158
 159 static void bamboo_init(ram_addr_t ram_size,
 160                         const char *boot_device,
 161                         const char *kernel_filename,
 162                         const char *kernel_cmdline,
 163                         const char *initrd_filename,
 164                         const char *cpu_model)
 165 {
 166     unsigned int pci_irq_nrs[4] = { 28, 27, 26, 25 };
 167     MemoryRegion *address_space_mem = get_system_memory();
 168     MemoryRegion *ram_memories
 169         = g_malloc(PPC440EP_SDRAM_NR_BANKS * sizeof(*ram_memories));
 170     target_phys_addr_t ram_bases[PPC440EP_SDRAM_NR_BANKS];
 171     target_phys_addr_t ram_sizes[PPC440EP_SDRAM_NR_BANKS];
 172     qemu_irq *pic;
 173     qemu_irq *irqs;
 174     PCIBus *pcibus;
 175     CPUPPCState *env;
 176     uint64_t elf_entry;
 177     uint64_t elf_lowaddr;
 178     target_phys_addr_t loadaddr = 0;
 179     target_long initrd_size = 0;
 180     DeviceState *dev;
 181     int success;
 182     int i;
 183
 184     /* Setup CPU. */
 185     if (cpu_model == NULL) {
 186         cpu_model = "440EP";
 187     }
 188     env = cpu_init(cpu_model);
 189     if (!env) {
 190         fprintf(stderr, "Unable to initialize CPU!\n");
 191         exit(1);
 192     }
 193
 194     qemu_register_reset(main_cpu_reset, env);
 195     ppc_booke_timers_init(env, 400000000, 0);
 196     ppc_dcr_init(env, NULL, NULL);
 197
 198     /* interrupt controller */
 199     irqs = g_malloc0(sizeof(qemu_irq) * PPCUIC_OUTPUT_NB);
 200     irqs[PPCUIC_OUTPUT_INT] = ((qemu_irq *)env->irq_inputs)[PPC40x_INPUT_INT];
 201     irqs[PPCUIC_OUTPUT_CINT] = ((qemu_irq *)env->irq_inputs)[PPC40x_INPUT_CINT];
 202     pic = ppcuic_init(env, irqs, 0x0C0, 0, 1);
 203
 204     /* SDRAM controller */
 205     memset(ram_bases, 0, sizeof(ram_bases));
 206     memset(ram_sizes, 0, sizeof(ram_sizes));
 207     ram_size = ppc4xx_sdram_adjust(ram_size, PPC440EP_SDRAM_NR_BANKS,
 208                                    ram_memories,
 209                                    ram_bases, ram_sizes,
 210                                    ppc440ep_sdram_bank_sizes);
 211     /* XXX 440EP's ECC interrupts are on UIC1, but we've only created UIC0. */
 212     ppc4xx_sdram_init(env, pic[14], PPC440EP_SDRAM_NR_BANKS, ram_memories,
 213                       ram_bases, ram_sizes, 1);
 214
 215     /* PCI */
 216     dev = sysbus_create_varargs("ppc4xx-pcihost", PPC440EP_PCI_CONFIG,
 217                                 pic[pci_irq_nrs[0]], pic[pci_irq_nrs[1]],
 218                                 pic[pci_irq_nrs[2]], pic[pci_irq_nrs[3]],
 219                                 NULL);
 220     pcibus = (PCIBus *)qdev_get_child_bus(dev, "pci.0");
 221     if (!pcibus) {
 222         fprintf(stderr, "couldn't create PCI controller!\n");
 223         exit(1);
 224     }
 225
 226     isa_mmio_init(PPC440EP_PCI_IO, PPC440EP_PCI_IOLEN);
 227
 228     if (serial_hds[0] != NULL) {
 229         serial_mm_init(address_space_mem, 0xef600300, 0, pic[0],
 230                        PPC_SERIAL_MM_BAUDBASE, serial_hds[0],
 231                        DEVICE_BIG_ENDIAN);
 232     }
 233     if (serial_hds[1] != NULL) {
 234         serial_mm_init(address_space_mem, 0xef600400, 0, pic[1],
 235                        PPC_SERIAL_MM_BAUDBASE, serial_hds[1],
 236                        DEVICE_BIG_ENDIAN);
 237     }
 238
 239     if (pcibus) {
 240         /* Register network interfaces. */
 241         for (i = 0; i < nb_nics; i++) {
 242             /* There are no PCI NICs on the Bamboo board, but there are
 243              * PCI slots, so we can pick whatever default model we want. */
 244             pci_nic_init_nofail(&nd_table[i], "e1000", NULL);
 245         }
 246     }
 247
 248     /* Load kernel. */
 249     if (kernel_filename) {
 250         success = load_uimage(kernel_filename, &entry, &loadaddr, NULL);
 251         if (success < 0) {
 252             success = load_elf(kernel_filename, NULL, NULL, &elf_entry,
 253                                &elf_lowaddr, NULL, 1, ELF_MACHINE, 0);
 254             entry = elf_entry;
 255             loadaddr = elf_lowaddr;
 256         }
 257         /* XXX try again as binary */
 258         if (success < 0) {
 259             fprintf(stderr, "qemu: could not load kernel '%s'\n",
 260                     kernel_filename);
 261             exit(1);
 262         }
 263     }
 264
 265     /* Load initrd. */
 266     if (initrd_filename) {
 267         initrd_size = load_image_targphys(initrd_filename, RAMDISK_ADDR,
 268                                           ram_size - RAMDISK_ADDR);
 269
 270         if (initrd_size < 0) {
 271             fprintf(stderr, "qemu: could not load ram disk '%s' at %x\n",
 272                     initrd_filename, RAMDISK_ADDR);
 273             exit(1);
 274         }
 275     }
 276
 277     /* If we're loading a kernel directly, we must load the device tree too. */
 278     if (kernel_filename) {
 279         if (bamboo_load_device_tree(FDT_ADDR, ram_size, RAMDISK_ADDR,
 280                                     initrd_size, kernel_cmdline) < 0) {
 281             fprintf(stderr, "couldn't load device tree\n");
 282             exit(1);
 283         }
 284     }
 285
 286     if (kvm_enabled())
 287         kvmppc_init();
 288 }
 289
 290 static QEMUMachine bamboo_machine = {
 291     .name = "bamboo",
 292     .desc = "bamboo",
 293     .init = bamboo_init,
 294 };
 295
 296 static void bamboo_machine_init(void)
 297 {
 298     qemu_register_machine(&bamboo_machine);
 299 }
 300
 301 machine_init(bamboo_machine_init);