vnc: add configurable keyboard delay
[qemu.git] / migration / ram.c
blob844ea4694f5c1da151bd6fbaa1410a0d1d52beba
1 /*
2 * QEMU System Emulator
4 * Copyright (c) 2003-2008 Fabrice Bellard
5 * Copyright (c) 2011-2015 Red Hat Inc
7 * Authors:
8 * Juan Quintela <quintela@redhat.com>
10 * Permission is hereby granted, free of charge, to any person obtaining a copy
11 * of this software and associated documentation files (the "Software"), to deal
12 * in the Software without restriction, including without limitation the rights
13 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
14 * copies of the Software, and to permit persons to whom the Software is
15 * furnished to do so, subject to the following conditions:
17 * The above copyright notice and this permission notice shall be included in
18 * all copies or substantial portions of the Software.
20 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
21 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
22 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
23 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
24 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
25 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
26 * THE SOFTWARE.
28 #include "qemu/osdep.h"
29 #include "qemu-common.h"
30 #include "cpu.h"
31 #include <zlib.h>
32 #include "qapi-event.h"
33 #include "qemu/cutils.h"
34 #include "qemu/bitops.h"
35 #include "qemu/bitmap.h"
36 #include "qemu/timer.h"
37 #include "qemu/main-loop.h"
38 #include "migration/migration.h"
39 #include "migration/postcopy-ram.h"
40 #include "exec/address-spaces.h"
41 #include "migration/page_cache.h"
42 #include "qemu/error-report.h"
43 #include "trace.h"
44 #include "exec/ram_addr.h"
45 #include "qemu/rcu_queue.h"
47 #ifdef DEBUG_MIGRATION_RAM
48 #define DPRINTF(fmt, ...) \
49 do { fprintf(stdout, "migration_ram: " fmt, ## __VA_ARGS__); } while (0)
50 #else
51 #define DPRINTF(fmt, ...) \
52 do { } while (0)
53 #endif
55 static int dirty_rate_high_cnt;
57 static uint64_t bitmap_sync_count;
59 /***********************************************************/
60 /* ram save/restore */
62 #define RAM_SAVE_FLAG_FULL 0x01 /* Obsolete, not used anymore */
63 #define RAM_SAVE_FLAG_COMPRESS 0x02
64 #define RAM_SAVE_FLAG_MEM_SIZE 0x04
65 #define RAM_SAVE_FLAG_PAGE 0x08
66 #define RAM_SAVE_FLAG_EOS 0x10
67 #define RAM_SAVE_FLAG_CONTINUE 0x20
68 #define RAM_SAVE_FLAG_XBZRLE 0x40
69 /* 0x80 is reserved in migration.h start with 0x100 next */
70 #define RAM_SAVE_FLAG_COMPRESS_PAGE 0x100
72 static const uint8_t ZERO_TARGET_PAGE[TARGET_PAGE_SIZE];
74 static inline bool is_zero_range(uint8_t *p, uint64_t size)
76 return buffer_find_nonzero_offset(p, size) == size;
79 /* struct contains XBZRLE cache and a static page
80 used by the compression */
81 static struct {
82 /* buffer used for XBZRLE encoding */
83 uint8_t *encoded_buf;
84 /* buffer for storing page content */
85 uint8_t *current_buf;
86 /* Cache for XBZRLE, Protected by lock. */
87 PageCache *cache;
88 QemuMutex lock;
89 } XBZRLE;
91 /* buffer used for XBZRLE decoding */
92 static uint8_t *xbzrle_decoded_buf;
94 static void XBZRLE_cache_lock(void)
96 if (migrate_use_xbzrle())
97 qemu_mutex_lock(&XBZRLE.lock);
100 static void XBZRLE_cache_unlock(void)
102 if (migrate_use_xbzrle())
103 qemu_mutex_unlock(&XBZRLE.lock);
107 * called from qmp_migrate_set_cache_size in main thread, possibly while
108 * a migration is in progress.
109 * A running migration maybe using the cache and might finish during this
110 * call, hence changes to the cache are protected by XBZRLE.lock().
112 int64_t xbzrle_cache_resize(int64_t new_size)
114 PageCache *new_cache;
115 int64_t ret;
117 if (new_size < TARGET_PAGE_SIZE) {
118 return -1;
121 XBZRLE_cache_lock();
123 if (XBZRLE.cache != NULL) {
124 if (pow2floor(new_size) == migrate_xbzrle_cache_size()) {
125 goto out_new_size;
127 new_cache = cache_init(new_size / TARGET_PAGE_SIZE,
128 TARGET_PAGE_SIZE);
129 if (!new_cache) {
130 error_report("Error creating cache");
131 ret = -1;
132 goto out;
135 cache_fini(XBZRLE.cache);
136 XBZRLE.cache = new_cache;
139 out_new_size:
140 ret = pow2floor(new_size);
141 out:
142 XBZRLE_cache_unlock();
143 return ret;
146 /* accounting for migration statistics */
147 typedef struct AccountingInfo {
148 uint64_t dup_pages;
149 uint64_t skipped_pages;
150 uint64_t norm_pages;
151 uint64_t iterations;
152 uint64_t xbzrle_bytes;
153 uint64_t xbzrle_pages;
154 uint64_t xbzrle_cache_miss;
155 double xbzrle_cache_miss_rate;
156 uint64_t xbzrle_overflows;
157 } AccountingInfo;
159 static AccountingInfo acct_info;
161 static void acct_clear(void)
163 memset(&acct_info, 0, sizeof(acct_info));
166 uint64_t dup_mig_bytes_transferred(void)
168 return acct_info.dup_pages * TARGET_PAGE_SIZE;
171 uint64_t dup_mig_pages_transferred(void)
173 return acct_info.dup_pages;
176 uint64_t skipped_mig_bytes_transferred(void)
178 return acct_info.skipped_pages * TARGET_PAGE_SIZE;
181 uint64_t skipped_mig_pages_transferred(void)
183 return acct_info.skipped_pages;
186 uint64_t norm_mig_bytes_transferred(void)
188 return acct_info.norm_pages * TARGET_PAGE_SIZE;
191 uint64_t norm_mig_pages_transferred(void)
193 return acct_info.norm_pages;
196 uint64_t xbzrle_mig_bytes_transferred(void)
198 return acct_info.xbzrle_bytes;
201 uint64_t xbzrle_mig_pages_transferred(void)
203 return acct_info.xbzrle_pages;
206 uint64_t xbzrle_mig_pages_cache_miss(void)
208 return acct_info.xbzrle_cache_miss;
211 double xbzrle_mig_cache_miss_rate(void)
213 return acct_info.xbzrle_cache_miss_rate;
216 uint64_t xbzrle_mig_pages_overflow(void)
218 return acct_info.xbzrle_overflows;
221 /* This is the last block that we have visited serching for dirty pages
223 static RAMBlock *last_seen_block;
224 /* This is the last block from where we have sent data */
225 static RAMBlock *last_sent_block;
226 static ram_addr_t last_offset;
227 static QemuMutex migration_bitmap_mutex;
228 static uint64_t migration_dirty_pages;
229 static uint32_t last_version;
230 static bool ram_bulk_stage;
232 /* used by the search for pages to send */
233 struct PageSearchStatus {
234 /* Current block being searched */
235 RAMBlock *block;
236 /* Current offset to search from */
237 ram_addr_t offset;
238 /* Set once we wrap around */
239 bool complete_round;
241 typedef struct PageSearchStatus PageSearchStatus;
243 static struct BitmapRcu {
244 struct rcu_head rcu;
245 /* Main migration bitmap */
246 unsigned long *bmap;
247 /* bitmap of pages that haven't been sent even once
248 * only maintained and used in postcopy at the moment
249 * where it's used to send the dirtymap at the start
250 * of the postcopy phase
252 unsigned long *unsentmap;
253 } *migration_bitmap_rcu;
255 struct CompressParam {
256 bool start;
257 bool done;
258 QEMUFile *file;
259 QemuMutex mutex;
260 QemuCond cond;
261 RAMBlock *block;
262 ram_addr_t offset;
264 typedef struct CompressParam CompressParam;
266 struct DecompressParam {
267 bool start;
268 QemuMutex mutex;
269 QemuCond cond;
270 void *des;
271 uint8_t *compbuf;
272 int len;
274 typedef struct DecompressParam DecompressParam;
276 static CompressParam *comp_param;
277 static QemuThread *compress_threads;
278 /* comp_done_cond is used to wake up the migration thread when
279 * one of the compression threads has finished the compression.
280 * comp_done_lock is used to co-work with comp_done_cond.
282 static QemuMutex *comp_done_lock;
283 static QemuCond *comp_done_cond;
284 /* The empty QEMUFileOps will be used by file in CompressParam */
285 static const QEMUFileOps empty_ops = { };
287 static bool compression_switch;
288 static bool quit_comp_thread;
289 static bool quit_decomp_thread;
290 static DecompressParam *decomp_param;
291 static QemuThread *decompress_threads;
293 static int do_compress_ram_page(CompressParam *param);
295 static void *do_data_compress(void *opaque)
297 CompressParam *param = opaque;
299 while (!quit_comp_thread) {
300 qemu_mutex_lock(&param->mutex);
301 /* Re-check the quit_comp_thread in case of
302 * terminate_compression_threads is called just before
303 * qemu_mutex_lock(&param->mutex) and after
304 * while(!quit_comp_thread), re-check it here can make
305 * sure the compression thread terminate as expected.
307 while (!param->start && !quit_comp_thread) {
308 qemu_cond_wait(&param->cond, &param->mutex);
310 if (!quit_comp_thread) {
311 do_compress_ram_page(param);
313 param->start = false;
314 qemu_mutex_unlock(&param->mutex);
316 qemu_mutex_lock(comp_done_lock);
317 param->done = true;
318 qemu_cond_signal(comp_done_cond);
319 qemu_mutex_unlock(comp_done_lock);
322 return NULL;
325 static inline void terminate_compression_threads(void)
327 int idx, thread_count;
329 thread_count = migrate_compress_threads();
330 quit_comp_thread = true;
331 for (idx = 0; idx < thread_count; idx++) {
332 qemu_mutex_lock(&comp_param[idx].mutex);
333 qemu_cond_signal(&comp_param[idx].cond);
334 qemu_mutex_unlock(&comp_param[idx].mutex);
338 void migrate_compress_threads_join(void)
340 int i, thread_count;
342 if (!migrate_use_compression()) {
343 return;
345 terminate_compression_threads();
346 thread_count = migrate_compress_threads();
347 for (i = 0; i < thread_count; i++) {
348 qemu_thread_join(compress_threads + i);
349 qemu_fclose(comp_param[i].file);
350 qemu_mutex_destroy(&comp_param[i].mutex);
351 qemu_cond_destroy(&comp_param[i].cond);
353 qemu_mutex_destroy(comp_done_lock);
354 qemu_cond_destroy(comp_done_cond);
355 g_free(compress_threads);
356 g_free(comp_param);
357 g_free(comp_done_cond);
358 g_free(comp_done_lock);
359 compress_threads = NULL;
360 comp_param = NULL;
361 comp_done_cond = NULL;
362 comp_done_lock = NULL;
365 void migrate_compress_threads_create(void)
367 int i, thread_count;
369 if (!migrate_use_compression()) {
370 return;
372 quit_comp_thread = false;
373 compression_switch = true;
374 thread_count = migrate_compress_threads();
375 compress_threads = g_new0(QemuThread, thread_count);
376 comp_param = g_new0(CompressParam, thread_count);
377 comp_done_cond = g_new0(QemuCond, 1);
378 comp_done_lock = g_new0(QemuMutex, 1);
379 qemu_cond_init(comp_done_cond);
380 qemu_mutex_init(comp_done_lock);
381 for (i = 0; i < thread_count; i++) {
382 /* com_param[i].file is just used as a dummy buffer to save data, set
383 * it's ops to empty.
385 comp_param[i].file = qemu_fopen_ops(NULL, &empty_ops);
386 comp_param[i].done = true;
387 qemu_mutex_init(&comp_param[i].mutex);
388 qemu_cond_init(&comp_param[i].cond);
389 qemu_thread_create(compress_threads + i, "compress",
390 do_data_compress, comp_param + i,
391 QEMU_THREAD_JOINABLE);
396 * save_page_header: Write page header to wire
398 * If this is the 1st block, it also writes the block identification
400 * Returns: Number of bytes written
402 * @f: QEMUFile where to send the data
403 * @block: block that contains the page we want to send
404 * @offset: offset inside the block for the page
405 * in the lower bits, it contains flags
407 static size_t save_page_header(QEMUFile *f, RAMBlock *block, ram_addr_t offset)
409 size_t size, len;
411 qemu_put_be64(f, offset);
412 size = 8;
414 if (!(offset & RAM_SAVE_FLAG_CONTINUE)) {
415 len = strlen(block->idstr);
416 qemu_put_byte(f, len);
417 qemu_put_buffer(f, (uint8_t *)block->idstr, len);
418 size += 1 + len;
420 return size;
423 /* Reduce amount of guest cpu execution to hopefully slow down memory writes.
424 * If guest dirty memory rate is reduced below the rate at which we can
425 * transfer pages to the destination then we should be able to complete
426 * migration. Some workloads dirty memory way too fast and will not effectively
427 * converge, even with auto-converge.
429 static void mig_throttle_guest_down(void)
431 MigrationState *s = migrate_get_current();
432 uint64_t pct_initial = s->parameters.cpu_throttle_initial;
433 uint64_t pct_icrement = s->parameters.cpu_throttle_increment;
435 /* We have not started throttling yet. Let's start it. */
436 if (!cpu_throttle_active()) {
437 cpu_throttle_set(pct_initial);
438 } else {
439 /* Throttling already on, just increase the rate */
440 cpu_throttle_set(cpu_throttle_get_percentage() + pct_icrement);
444 /* Update the xbzrle cache to reflect a page that's been sent as all 0.
445 * The important thing is that a stale (not-yet-0'd) page be replaced
446 * by the new data.
447 * As a bonus, if the page wasn't in the cache it gets added so that
448 * when a small write is made into the 0'd page it gets XBZRLE sent
450 static void xbzrle_cache_zero_page(ram_addr_t current_addr)
452 if (ram_bulk_stage || !migrate_use_xbzrle()) {
453 return;
456 /* We don't care if this fails to allocate a new cache page
457 * as long as it updated an old one */
458 cache_insert(XBZRLE.cache, current_addr, ZERO_TARGET_PAGE,
459 bitmap_sync_count);
462 #define ENCODING_FLAG_XBZRLE 0x1
465 * save_xbzrle_page: compress and send current page
467 * Returns: 1 means that we wrote the page
468 * 0 means that page is identical to the one already sent
469 * -1 means that xbzrle would be longer than normal
471 * @f: QEMUFile where to send the data
472 * @current_data:
473 * @current_addr:
474 * @block: block that contains the page we want to send
475 * @offset: offset inside the block for the page
476 * @last_stage: if we are at the completion stage
477 * @bytes_transferred: increase it with the number of transferred bytes
479 static int save_xbzrle_page(QEMUFile *f, uint8_t **current_data,
480 ram_addr_t current_addr, RAMBlock *block,
481 ram_addr_t offset, bool last_stage,
482 uint64_t *bytes_transferred)
484 int encoded_len = 0, bytes_xbzrle;
485 uint8_t *prev_cached_page;
487 if (!cache_is_cached(XBZRLE.cache, current_addr, bitmap_sync_count)) {
488 acct_info.xbzrle_cache_miss++;
489 if (!last_stage) {
490 if (cache_insert(XBZRLE.cache, current_addr, *current_data,
491 bitmap_sync_count) == -1) {
492 return -1;
493 } else {
494 /* update *current_data when the page has been
495 inserted into cache */
496 *current_data = get_cached_data(XBZRLE.cache, current_addr);
499 return -1;
502 prev_cached_page = get_cached_data(XBZRLE.cache, current_addr);
504 /* save current buffer into memory */
505 memcpy(XBZRLE.current_buf, *current_data, TARGET_PAGE_SIZE);
507 /* XBZRLE encoding (if there is no overflow) */
508 encoded_len = xbzrle_encode_buffer(prev_cached_page, XBZRLE.current_buf,
509 TARGET_PAGE_SIZE, XBZRLE.encoded_buf,
510 TARGET_PAGE_SIZE);
511 if (encoded_len == 0) {
512 DPRINTF("Skipping unmodified page\n");
513 return 0;
514 } else if (encoded_len == -1) {
515 DPRINTF("Overflow\n");
516 acct_info.xbzrle_overflows++;
517 /* update data in the cache */
518 if (!last_stage) {
519 memcpy(prev_cached_page, *current_data, TARGET_PAGE_SIZE);
520 *current_data = prev_cached_page;
522 return -1;
525 /* we need to update the data in the cache, in order to get the same data */
526 if (!last_stage) {
527 memcpy(prev_cached_page, XBZRLE.current_buf, TARGET_PAGE_SIZE);
530 /* Send XBZRLE based compressed page */
531 bytes_xbzrle = save_page_header(f, block, offset | RAM_SAVE_FLAG_XBZRLE);
532 qemu_put_byte(f, ENCODING_FLAG_XBZRLE);
533 qemu_put_be16(f, encoded_len);
534 qemu_put_buffer(f, XBZRLE.encoded_buf, encoded_len);
535 bytes_xbzrle += encoded_len + 1 + 2;
536 acct_info.xbzrle_pages++;
537 acct_info.xbzrle_bytes += bytes_xbzrle;
538 *bytes_transferred += bytes_xbzrle;
540 return 1;
543 /* Called with rcu_read_lock() to protect migration_bitmap
544 * rb: The RAMBlock to search for dirty pages in
545 * start: Start address (typically so we can continue from previous page)
546 * ram_addr_abs: Pointer into which to store the address of the dirty page
547 * within the global ram_addr space
549 * Returns: byte offset within memory region of the start of a dirty page
551 static inline
552 ram_addr_t migration_bitmap_find_dirty(RAMBlock *rb,
553 ram_addr_t start,
554 ram_addr_t *ram_addr_abs)
556 unsigned long base = rb->offset >> TARGET_PAGE_BITS;
557 unsigned long nr = base + (start >> TARGET_PAGE_BITS);
558 uint64_t rb_size = rb->used_length;
559 unsigned long size = base + (rb_size >> TARGET_PAGE_BITS);
560 unsigned long *bitmap;
562 unsigned long next;
564 bitmap = atomic_rcu_read(&migration_bitmap_rcu)->bmap;
565 if (ram_bulk_stage && nr > base) {
566 next = nr + 1;
567 } else {
568 next = find_next_bit(bitmap, size, nr);
571 *ram_addr_abs = next << TARGET_PAGE_BITS;
572 return (next - base) << TARGET_PAGE_BITS;
575 static inline bool migration_bitmap_clear_dirty(ram_addr_t addr)
577 bool ret;
578 int nr = addr >> TARGET_PAGE_BITS;
579 unsigned long *bitmap = atomic_rcu_read(&migration_bitmap_rcu)->bmap;
581 ret = test_and_clear_bit(nr, bitmap);
583 if (ret) {
584 migration_dirty_pages--;
586 return ret;
589 static void migration_bitmap_sync_range(ram_addr_t start, ram_addr_t length)
591 unsigned long *bitmap;
592 bitmap = atomic_rcu_read(&migration_bitmap_rcu)->bmap;
593 migration_dirty_pages +=
594 cpu_physical_memory_sync_dirty_bitmap(bitmap, start, length);
597 /* Fix me: there are too many global variables used in migration process. */
598 static int64_t start_time;
599 static int64_t bytes_xfer_prev;
600 static int64_t num_dirty_pages_period;
601 static uint64_t xbzrle_cache_miss_prev;
602 static uint64_t iterations_prev;
604 static void migration_bitmap_sync_init(void)
606 start_time = 0;
607 bytes_xfer_prev = 0;
608 num_dirty_pages_period = 0;
609 xbzrle_cache_miss_prev = 0;
610 iterations_prev = 0;
613 static void migration_bitmap_sync(void)
615 RAMBlock *block;
616 uint64_t num_dirty_pages_init = migration_dirty_pages;
617 MigrationState *s = migrate_get_current();
618 int64_t end_time;
619 int64_t bytes_xfer_now;
621 bitmap_sync_count++;
623 if (!bytes_xfer_prev) {
624 bytes_xfer_prev = ram_bytes_transferred();
627 if (!start_time) {
628 start_time = qemu_clock_get_ms(QEMU_CLOCK_REALTIME);
631 trace_migration_bitmap_sync_start();
632 address_space_sync_dirty_bitmap(&address_space_memory);
634 qemu_mutex_lock(&migration_bitmap_mutex);
635 rcu_read_lock();
636 QLIST_FOREACH_RCU(block, &ram_list.blocks, next) {
637 migration_bitmap_sync_range(block->offset, block->used_length);
639 rcu_read_unlock();
640 qemu_mutex_unlock(&migration_bitmap_mutex);
642 trace_migration_bitmap_sync_end(migration_dirty_pages
643 - num_dirty_pages_init);
644 num_dirty_pages_period += migration_dirty_pages - num_dirty_pages_init;
645 end_time = qemu_clock_get_ms(QEMU_CLOCK_REALTIME);
647 /* more than 1 second = 1000 millisecons */
648 if (end_time > start_time + 1000) {
649 if (migrate_auto_converge()) {
650 /* The following detection logic can be refined later. For now:
651 Check to see if the dirtied bytes is 50% more than the approx.
652 amount of bytes that just got transferred since the last time we
653 were in this routine. If that happens twice, start or increase
654 throttling */
655 bytes_xfer_now = ram_bytes_transferred();
657 if (s->dirty_pages_rate &&
658 (num_dirty_pages_period * TARGET_PAGE_SIZE >
659 (bytes_xfer_now - bytes_xfer_prev)/2) &&
660 (dirty_rate_high_cnt++ >= 2)) {
661 trace_migration_throttle();
662 dirty_rate_high_cnt = 0;
663 mig_throttle_guest_down();
665 bytes_xfer_prev = bytes_xfer_now;
668 if (migrate_use_xbzrle()) {
669 if (iterations_prev != acct_info.iterations) {
670 acct_info.xbzrle_cache_miss_rate =
671 (double)(acct_info.xbzrle_cache_miss -
672 xbzrle_cache_miss_prev) /
673 (acct_info.iterations - iterations_prev);
675 iterations_prev = acct_info.iterations;
676 xbzrle_cache_miss_prev = acct_info.xbzrle_cache_miss;
678 s->dirty_pages_rate = num_dirty_pages_period * 1000
679 / (end_time - start_time);
680 s->dirty_bytes_rate = s->dirty_pages_rate * TARGET_PAGE_SIZE;
681 start_time = end_time;
682 num_dirty_pages_period = 0;
684 s->dirty_sync_count = bitmap_sync_count;
685 if (migrate_use_events()) {
686 qapi_event_send_migration_pass(bitmap_sync_count, NULL);
691 * save_zero_page: Send the zero page to the stream
693 * Returns: Number of pages written.
695 * @f: QEMUFile where to send the data
696 * @block: block that contains the page we want to send
697 * @offset: offset inside the block for the page
698 * @p: pointer to the page
699 * @bytes_transferred: increase it with the number of transferred bytes
701 static int save_zero_page(QEMUFile *f, RAMBlock *block, ram_addr_t offset,
702 uint8_t *p, uint64_t *bytes_transferred)
704 int pages = -1;
706 if (is_zero_range(p, TARGET_PAGE_SIZE)) {
707 acct_info.dup_pages++;
708 *bytes_transferred += save_page_header(f, block,
709 offset | RAM_SAVE_FLAG_COMPRESS);
710 qemu_put_byte(f, 0);
711 *bytes_transferred += 1;
712 pages = 1;
715 return pages;
719 * ram_save_page: Send the given page to the stream
721 * Returns: Number of pages written.
722 * < 0 - error
723 * >=0 - Number of pages written - this might legally be 0
724 * if xbzrle noticed the page was the same.
726 * @f: QEMUFile where to send the data
727 * @block: block that contains the page we want to send
728 * @offset: offset inside the block for the page
729 * @last_stage: if we are at the completion stage
730 * @bytes_transferred: increase it with the number of transferred bytes
732 static int ram_save_page(QEMUFile *f, PageSearchStatus *pss,
733 bool last_stage, uint64_t *bytes_transferred)
735 int pages = -1;
736 uint64_t bytes_xmit;
737 ram_addr_t current_addr;
738 uint8_t *p;
739 int ret;
740 bool send_async = true;
741 RAMBlock *block = pss->block;
742 ram_addr_t offset = pss->offset;
744 p = block->host + offset;
746 /* In doubt sent page as normal */
747 bytes_xmit = 0;
748 ret = ram_control_save_page(f, block->offset,
749 offset, TARGET_PAGE_SIZE, &bytes_xmit);
750 if (bytes_xmit) {
751 *bytes_transferred += bytes_xmit;
752 pages = 1;
755 XBZRLE_cache_lock();
757 current_addr = block->offset + offset;
759 if (block == last_sent_block) {
760 offset |= RAM_SAVE_FLAG_CONTINUE;
762 if (ret != RAM_SAVE_CONTROL_NOT_SUPP) {
763 if (ret != RAM_SAVE_CONTROL_DELAYED) {
764 if (bytes_xmit > 0) {
765 acct_info.norm_pages++;
766 } else if (bytes_xmit == 0) {
767 acct_info.dup_pages++;
770 } else {
771 pages = save_zero_page(f, block, offset, p, bytes_transferred);
772 if (pages > 0) {
773 /* Must let xbzrle know, otherwise a previous (now 0'd) cached
774 * page would be stale
776 xbzrle_cache_zero_page(current_addr);
777 } else if (!ram_bulk_stage && migrate_use_xbzrle()) {
778 pages = save_xbzrle_page(f, &p, current_addr, block,
779 offset, last_stage, bytes_transferred);
780 if (!last_stage) {
781 /* Can't send this cached data async, since the cache page
782 * might get updated before it gets to the wire
784 send_async = false;
789 /* XBZRLE overflow or normal page */
790 if (pages == -1) {
791 *bytes_transferred += save_page_header(f, block,
792 offset | RAM_SAVE_FLAG_PAGE);
793 if (send_async) {
794 qemu_put_buffer_async(f, p, TARGET_PAGE_SIZE);
795 } else {
796 qemu_put_buffer(f, p, TARGET_PAGE_SIZE);
798 *bytes_transferred += TARGET_PAGE_SIZE;
799 pages = 1;
800 acct_info.norm_pages++;
803 XBZRLE_cache_unlock();
805 return pages;
808 static int do_compress_ram_page(CompressParam *param)
810 int bytes_sent, blen;
811 uint8_t *p;
812 RAMBlock *block = param->block;
813 ram_addr_t offset = param->offset;
815 p = block->host + (offset & TARGET_PAGE_MASK);
817 bytes_sent = save_page_header(param->file, block, offset |
818 RAM_SAVE_FLAG_COMPRESS_PAGE);
819 blen = qemu_put_compression_data(param->file, p, TARGET_PAGE_SIZE,
820 migrate_compress_level());
821 bytes_sent += blen;
823 return bytes_sent;
826 static inline void start_compression(CompressParam *param)
828 param->done = false;
829 qemu_mutex_lock(&param->mutex);
830 param->start = true;
831 qemu_cond_signal(&param->cond);
832 qemu_mutex_unlock(&param->mutex);
835 static inline void start_decompression(DecompressParam *param)
837 qemu_mutex_lock(&param->mutex);
838 param->start = true;
839 qemu_cond_signal(&param->cond);
840 qemu_mutex_unlock(&param->mutex);
843 static uint64_t bytes_transferred;
845 static void flush_compressed_data(QEMUFile *f)
847 int idx, len, thread_count;
849 if (!migrate_use_compression()) {
850 return;
852 thread_count = migrate_compress_threads();
853 for (idx = 0; idx < thread_count; idx++) {
854 if (!comp_param[idx].done) {
855 qemu_mutex_lock(comp_done_lock);
856 while (!comp_param[idx].done && !quit_comp_thread) {
857 qemu_cond_wait(comp_done_cond, comp_done_lock);
859 qemu_mutex_unlock(comp_done_lock);
861 if (!quit_comp_thread) {
862 len = qemu_put_qemu_file(f, comp_param[idx].file);
863 bytes_transferred += len;
868 static inline void set_compress_params(CompressParam *param, RAMBlock *block,
869 ram_addr_t offset)
871 param->block = block;
872 param->offset = offset;
875 static int compress_page_with_multi_thread(QEMUFile *f, RAMBlock *block,
876 ram_addr_t offset,
877 uint64_t *bytes_transferred)
879 int idx, thread_count, bytes_xmit = -1, pages = -1;
881 thread_count = migrate_compress_threads();
882 qemu_mutex_lock(comp_done_lock);
883 while (true) {
884 for (idx = 0; idx < thread_count; idx++) {
885 if (comp_param[idx].done) {
886 bytes_xmit = qemu_put_qemu_file(f, comp_param[idx].file);
887 set_compress_params(&comp_param[idx], block, offset);
888 start_compression(&comp_param[idx]);
889 pages = 1;
890 acct_info.norm_pages++;
891 *bytes_transferred += bytes_xmit;
892 break;
895 if (pages > 0) {
896 break;
897 } else {
898 qemu_cond_wait(comp_done_cond, comp_done_lock);
901 qemu_mutex_unlock(comp_done_lock);
903 return pages;
907 * ram_save_compressed_page: compress the given page and send it to the stream
909 * Returns: Number of pages written.
911 * @f: QEMUFile where to send the data
912 * @block: block that contains the page we want to send
913 * @offset: offset inside the block for the page
914 * @last_stage: if we are at the completion stage
915 * @bytes_transferred: increase it with the number of transferred bytes
917 static int ram_save_compressed_page(QEMUFile *f, PageSearchStatus *pss,
918 bool last_stage,
919 uint64_t *bytes_transferred)
921 int pages = -1;
922 uint64_t bytes_xmit;
923 uint8_t *p;
924 int ret;
925 RAMBlock *block = pss->block;
926 ram_addr_t offset = pss->offset;
928 p = block->host + offset;
930 bytes_xmit = 0;
931 ret = ram_control_save_page(f, block->offset,
932 offset, TARGET_PAGE_SIZE, &bytes_xmit);
933 if (bytes_xmit) {
934 *bytes_transferred += bytes_xmit;
935 pages = 1;
937 if (block == last_sent_block) {
938 offset |= RAM_SAVE_FLAG_CONTINUE;
940 if (ret != RAM_SAVE_CONTROL_NOT_SUPP) {
941 if (ret != RAM_SAVE_CONTROL_DELAYED) {
942 if (bytes_xmit > 0) {
943 acct_info.norm_pages++;
944 } else if (bytes_xmit == 0) {
945 acct_info.dup_pages++;
948 } else {
949 /* When starting the process of a new block, the first page of
950 * the block should be sent out before other pages in the same
951 * block, and all the pages in last block should have been sent
952 * out, keeping this order is important, because the 'cont' flag
953 * is used to avoid resending the block name.
955 if (block != last_sent_block) {
956 flush_compressed_data(f);
957 pages = save_zero_page(f, block, offset, p, bytes_transferred);
958 if (pages == -1) {
959 set_compress_params(&comp_param[0], block, offset);
960 /* Use the qemu thread to compress the data to make sure the
961 * first page is sent out before other pages
963 bytes_xmit = do_compress_ram_page(&comp_param[0]);
964 acct_info.norm_pages++;
965 qemu_put_qemu_file(f, comp_param[0].file);
966 *bytes_transferred += bytes_xmit;
967 pages = 1;
969 } else {
970 pages = save_zero_page(f, block, offset, p, bytes_transferred);
971 if (pages == -1) {
972 pages = compress_page_with_multi_thread(f, block, offset,
973 bytes_transferred);
978 return pages;
982 * Find the next dirty page and update any state associated with
983 * the search process.
985 * Returns: True if a page is found
987 * @f: Current migration stream.
988 * @pss: Data about the state of the current dirty page scan.
989 * @*again: Set to false if the search has scanned the whole of RAM
990 * *ram_addr_abs: Pointer into which to store the address of the dirty page
991 * within the global ram_addr space
993 static bool find_dirty_block(QEMUFile *f, PageSearchStatus *pss,
994 bool *again, ram_addr_t *ram_addr_abs)
996 pss->offset = migration_bitmap_find_dirty(pss->block, pss->offset,
997 ram_addr_abs);
998 if (pss->complete_round && pss->block == last_seen_block &&
999 pss->offset >= last_offset) {
1001 * We've been once around the RAM and haven't found anything.
1002 * Give up.
1004 *again = false;
1005 return false;
1007 if (pss->offset >= pss->block->used_length) {
1008 /* Didn't find anything in this RAM Block */
1009 pss->offset = 0;
1010 pss->block = QLIST_NEXT_RCU(pss->block, next);
1011 if (!pss->block) {
1012 /* Hit the end of the list */
1013 pss->block = QLIST_FIRST_RCU(&ram_list.blocks);
1014 /* Flag that we've looped */
1015 pss->complete_round = true;
1016 ram_bulk_stage = false;
1017 if (migrate_use_xbzrle()) {
1018 /* If xbzrle is on, stop using the data compression at this
1019 * point. In theory, xbzrle can do better than compression.
1021 flush_compressed_data(f);
1022 compression_switch = false;
1025 /* Didn't find anything this time, but try again on the new block */
1026 *again = true;
1027 return false;
1028 } else {
1029 /* Can go around again, but... */
1030 *again = true;
1031 /* We've found something so probably don't need to */
1032 return true;
1037 * Helper for 'get_queued_page' - gets a page off the queue
1038 * ms: MigrationState in
1039 * *offset: Used to return the offset within the RAMBlock
1040 * ram_addr_abs: global offset in the dirty/sent bitmaps
1042 * Returns: block (or NULL if none available)
1044 static RAMBlock *unqueue_page(MigrationState *ms, ram_addr_t *offset,
1045 ram_addr_t *ram_addr_abs)
1047 RAMBlock *block = NULL;
1049 qemu_mutex_lock(&ms->src_page_req_mutex);
1050 if (!QSIMPLEQ_EMPTY(&ms->src_page_requests)) {
1051 struct MigrationSrcPageRequest *entry =
1052 QSIMPLEQ_FIRST(&ms->src_page_requests);
1053 block = entry->rb;
1054 *offset = entry->offset;
1055 *ram_addr_abs = (entry->offset + entry->rb->offset) &
1056 TARGET_PAGE_MASK;
1058 if (entry->len > TARGET_PAGE_SIZE) {
1059 entry->len -= TARGET_PAGE_SIZE;
1060 entry->offset += TARGET_PAGE_SIZE;
1061 } else {
1062 memory_region_unref(block->mr);
1063 QSIMPLEQ_REMOVE_HEAD(&ms->src_page_requests, next_req);
1064 g_free(entry);
1067 qemu_mutex_unlock(&ms->src_page_req_mutex);
1069 return block;
1073 * Unqueue a page from the queue fed by postcopy page requests; skips pages
1074 * that are already sent (!dirty)
1076 * ms: MigrationState in
1077 * pss: PageSearchStatus structure updated with found block/offset
1078 * ram_addr_abs: global offset in the dirty/sent bitmaps
1080 * Returns: true if a queued page is found
1082 static bool get_queued_page(MigrationState *ms, PageSearchStatus *pss,
1083 ram_addr_t *ram_addr_abs)
1085 RAMBlock *block;
1086 ram_addr_t offset;
1087 bool dirty;
1089 do {
1090 block = unqueue_page(ms, &offset, ram_addr_abs);
1092 * We're sending this page, and since it's postcopy nothing else
1093 * will dirty it, and we must make sure it doesn't get sent again
1094 * even if this queue request was received after the background
1095 * search already sent it.
1097 if (block) {
1098 unsigned long *bitmap;
1099 bitmap = atomic_rcu_read(&migration_bitmap_rcu)->bmap;
1100 dirty = test_bit(*ram_addr_abs >> TARGET_PAGE_BITS, bitmap);
1101 if (!dirty) {
1102 trace_get_queued_page_not_dirty(
1103 block->idstr, (uint64_t)offset,
1104 (uint64_t)*ram_addr_abs,
1105 test_bit(*ram_addr_abs >> TARGET_PAGE_BITS,
1106 atomic_rcu_read(&migration_bitmap_rcu)->unsentmap));
1107 } else {
1108 trace_get_queued_page(block->idstr,
1109 (uint64_t)offset,
1110 (uint64_t)*ram_addr_abs);
1114 } while (block && !dirty);
1116 if (block) {
1118 * As soon as we start servicing pages out of order, then we have
1119 * to kill the bulk stage, since the bulk stage assumes
1120 * in (migration_bitmap_find_and_reset_dirty) that every page is
1121 * dirty, that's no longer true.
1123 ram_bulk_stage = false;
1126 * We want the background search to continue from the queued page
1127 * since the guest is likely to want other pages near to the page
1128 * it just requested.
1130 pss->block = block;
1131 pss->offset = offset;
1134 return !!block;
1138 * flush_page_queue: Flush any remaining pages in the ram request queue
1139 * it should be empty at the end anyway, but in error cases there may be
1140 * some left.
1142 * ms: MigrationState
1144 void flush_page_queue(MigrationState *ms)
1146 struct MigrationSrcPageRequest *mspr, *next_mspr;
1147 /* This queue generally should be empty - but in the case of a failed
1148 * migration might have some droppings in.
1150 rcu_read_lock();
1151 QSIMPLEQ_FOREACH_SAFE(mspr, &ms->src_page_requests, next_req, next_mspr) {
1152 memory_region_unref(mspr->rb->mr);
1153 QSIMPLEQ_REMOVE_HEAD(&ms->src_page_requests, next_req);
1154 g_free(mspr);
1156 rcu_read_unlock();
1160 * Queue the pages for transmission, e.g. a request from postcopy destination
1161 * ms: MigrationStatus in which the queue is held
1162 * rbname: The RAMBlock the request is for - may be NULL (to mean reuse last)
1163 * start: Offset from the start of the RAMBlock
1164 * len: Length (in bytes) to send
1165 * Return: 0 on success
1167 int ram_save_queue_pages(MigrationState *ms, const char *rbname,
1168 ram_addr_t start, ram_addr_t len)
1170 RAMBlock *ramblock;
1172 rcu_read_lock();
1173 if (!rbname) {
1174 /* Reuse last RAMBlock */
1175 ramblock = ms->last_req_rb;
1177 if (!ramblock) {
1179 * Shouldn't happen, we can't reuse the last RAMBlock if
1180 * it's the 1st request.
1182 error_report("ram_save_queue_pages no previous block");
1183 goto err;
1185 } else {
1186 ramblock = qemu_ram_block_by_name(rbname);
1188 if (!ramblock) {
1189 /* We shouldn't be asked for a non-existent RAMBlock */
1190 error_report("ram_save_queue_pages no block '%s'", rbname);
1191 goto err;
1193 ms->last_req_rb = ramblock;
1195 trace_ram_save_queue_pages(ramblock->idstr, start, len);
1196 if (start+len > ramblock->used_length) {
1197 error_report("%s request overrun start=" RAM_ADDR_FMT " len="
1198 RAM_ADDR_FMT " blocklen=" RAM_ADDR_FMT,
1199 __func__, start, len, ramblock->used_length);
1200 goto err;
1203 struct MigrationSrcPageRequest *new_entry =
1204 g_malloc0(sizeof(struct MigrationSrcPageRequest));
1205 new_entry->rb = ramblock;
1206 new_entry->offset = start;
1207 new_entry->len = len;
1209 memory_region_ref(ramblock->mr);
1210 qemu_mutex_lock(&ms->src_page_req_mutex);
1211 QSIMPLEQ_INSERT_TAIL(&ms->src_page_requests, new_entry, next_req);
1212 qemu_mutex_unlock(&ms->src_page_req_mutex);
1213 rcu_read_unlock();
1215 return 0;
1217 err:
1218 rcu_read_unlock();
1219 return -1;
1223 * ram_save_target_page: Save one target page
1226 * @f: QEMUFile where to send the data
1227 * @block: pointer to block that contains the page we want to send
1228 * @offset: offset inside the block for the page;
1229 * @last_stage: if we are at the completion stage
1230 * @bytes_transferred: increase it with the number of transferred bytes
1231 * @dirty_ram_abs: Address of the start of the dirty page in ram_addr_t space
1233 * Returns: Number of pages written.
1235 static int ram_save_target_page(MigrationState *ms, QEMUFile *f,
1236 PageSearchStatus *pss,
1237 bool last_stage,
1238 uint64_t *bytes_transferred,
1239 ram_addr_t dirty_ram_abs)
1241 int res = 0;
1243 /* Check the pages is dirty and if it is send it */
1244 if (migration_bitmap_clear_dirty(dirty_ram_abs)) {
1245 unsigned long *unsentmap;
1246 if (compression_switch && migrate_use_compression()) {
1247 res = ram_save_compressed_page(f, pss,
1248 last_stage,
1249 bytes_transferred);
1250 } else {
1251 res = ram_save_page(f, pss, last_stage,
1252 bytes_transferred);
1255 if (res < 0) {
1256 return res;
1258 unsentmap = atomic_rcu_read(&migration_bitmap_rcu)->unsentmap;
1259 if (unsentmap) {
1260 clear_bit(dirty_ram_abs >> TARGET_PAGE_BITS, unsentmap);
1262 /* Only update last_sent_block if a block was actually sent; xbzrle
1263 * might have decided the page was identical so didn't bother writing
1264 * to the stream.
1266 if (res > 0) {
1267 last_sent_block = pss->block;
1271 return res;
1275 * ram_save_host_page: Starting at *offset send pages up to the end
1276 * of the current host page. It's valid for the initial
1277 * offset to point into the middle of a host page
1278 * in which case the remainder of the hostpage is sent.
1279 * Only dirty target pages are sent.
1281 * Returns: Number of pages written.
1283 * @f: QEMUFile where to send the data
1284 * @block: pointer to block that contains the page we want to send
1285 * @offset: offset inside the block for the page; updated to last target page
1286 * sent
1287 * @last_stage: if we are at the completion stage
1288 * @bytes_transferred: increase it with the number of transferred bytes
1289 * @dirty_ram_abs: Address of the start of the dirty page in ram_addr_t space
1291 static int ram_save_host_page(MigrationState *ms, QEMUFile *f,
1292 PageSearchStatus *pss,
1293 bool last_stage,
1294 uint64_t *bytes_transferred,
1295 ram_addr_t dirty_ram_abs)
1297 int tmppages, pages = 0;
1298 do {
1299 tmppages = ram_save_target_page(ms, f, pss, last_stage,
1300 bytes_transferred, dirty_ram_abs);
1301 if (tmppages < 0) {
1302 return tmppages;
1305 pages += tmppages;
1306 pss->offset += TARGET_PAGE_SIZE;
1307 dirty_ram_abs += TARGET_PAGE_SIZE;
1308 } while (pss->offset & (qemu_host_page_size - 1));
1310 /* The offset we leave with is the last one we looked at */
1311 pss->offset -= TARGET_PAGE_SIZE;
1312 return pages;
1316 * ram_find_and_save_block: Finds a dirty page and sends it to f
1318 * Called within an RCU critical section.
1320 * Returns: The number of pages written
1321 * 0 means no dirty pages
1323 * @f: QEMUFile where to send the data
1324 * @last_stage: if we are at the completion stage
1325 * @bytes_transferred: increase it with the number of transferred bytes
1327 * On systems where host-page-size > target-page-size it will send all the
1328 * pages in a host page that are dirty.
1331 static int ram_find_and_save_block(QEMUFile *f, bool last_stage,
1332 uint64_t *bytes_transferred)
1334 PageSearchStatus pss;
1335 MigrationState *ms = migrate_get_current();
1336 int pages = 0;
1337 bool again, found;
1338 ram_addr_t dirty_ram_abs; /* Address of the start of the dirty page in
1339 ram_addr_t space */
1341 pss.block = last_seen_block;
1342 pss.offset = last_offset;
1343 pss.complete_round = false;
1345 if (!pss.block) {
1346 pss.block = QLIST_FIRST_RCU(&ram_list.blocks);
1349 do {
1350 again = true;
1351 found = get_queued_page(ms, &pss, &dirty_ram_abs);
1353 if (!found) {
1354 /* priority queue empty, so just search for something dirty */
1355 found = find_dirty_block(f, &pss, &again, &dirty_ram_abs);
1358 if (found) {
1359 pages = ram_save_host_page(ms, f, &pss,
1360 last_stage, bytes_transferred,
1361 dirty_ram_abs);
1363 } while (!pages && again);
1365 last_seen_block = pss.block;
1366 last_offset = pss.offset;
1368 return pages;
1371 void acct_update_position(QEMUFile *f, size_t size, bool zero)
1373 uint64_t pages = size / TARGET_PAGE_SIZE;
1374 if (zero) {
1375 acct_info.dup_pages += pages;
1376 } else {
1377 acct_info.norm_pages += pages;
1378 bytes_transferred += size;
1379 qemu_update_position(f, size);
1383 static ram_addr_t ram_save_remaining(void)
1385 return migration_dirty_pages;
1388 uint64_t ram_bytes_remaining(void)
1390 return ram_save_remaining() * TARGET_PAGE_SIZE;
1393 uint64_t ram_bytes_transferred(void)
1395 return bytes_transferred;
1398 uint64_t ram_bytes_total(void)
1400 RAMBlock *block;
1401 uint64_t total = 0;
1403 rcu_read_lock();
1404 QLIST_FOREACH_RCU(block, &ram_list.blocks, next)
1405 total += block->used_length;
1406 rcu_read_unlock();
1407 return total;
1410 void free_xbzrle_decoded_buf(void)
1412 g_free(xbzrle_decoded_buf);
1413 xbzrle_decoded_buf = NULL;
1416 static void migration_bitmap_free(struct BitmapRcu *bmap)
1418 g_free(bmap->bmap);
1419 g_free(bmap->unsentmap);
1420 g_free(bmap);
1423 static void ram_migration_cleanup(void *opaque)
1425 /* caller have hold iothread lock or is in a bh, so there is
1426 * no writing race against this migration_bitmap
1428 struct BitmapRcu *bitmap = migration_bitmap_rcu;
1429 atomic_rcu_set(&migration_bitmap_rcu, NULL);
1430 if (bitmap) {
1431 memory_global_dirty_log_stop();
1432 call_rcu(bitmap, migration_bitmap_free, rcu);
1435 XBZRLE_cache_lock();
1436 if (XBZRLE.cache) {
1437 cache_fini(XBZRLE.cache);
1438 g_free(XBZRLE.encoded_buf);
1439 g_free(XBZRLE.current_buf);
1440 XBZRLE.cache = NULL;
1441 XBZRLE.encoded_buf = NULL;
1442 XBZRLE.current_buf = NULL;
1444 XBZRLE_cache_unlock();
1447 static void reset_ram_globals(void)
1449 last_seen_block = NULL;
1450 last_sent_block = NULL;
1451 last_offset = 0;
1452 last_version = ram_list.version;
1453 ram_bulk_stage = true;
1456 #define MAX_WAIT 50 /* ms, half buffered_file limit */
1458 void migration_bitmap_extend(ram_addr_t old, ram_addr_t new)
1460 /* called in qemu main thread, so there is
1461 * no writing race against this migration_bitmap
1463 if (migration_bitmap_rcu) {
1464 struct BitmapRcu *old_bitmap = migration_bitmap_rcu, *bitmap;
1465 bitmap = g_new(struct BitmapRcu, 1);
1466 bitmap->bmap = bitmap_new(new);
1468 /* prevent migration_bitmap content from being set bit
1469 * by migration_bitmap_sync_range() at the same time.
1470 * it is safe to migration if migration_bitmap is cleared bit
1471 * at the same time.
1473 qemu_mutex_lock(&migration_bitmap_mutex);
1474 bitmap_copy(bitmap->bmap, old_bitmap->bmap, old);
1475 bitmap_set(bitmap->bmap, old, new - old);
1477 /* We don't have a way to safely extend the sentmap
1478 * with RCU; so mark it as missing, entry to postcopy
1479 * will fail.
1481 bitmap->unsentmap = NULL;
1483 atomic_rcu_set(&migration_bitmap_rcu, bitmap);
1484 qemu_mutex_unlock(&migration_bitmap_mutex);
1485 migration_dirty_pages += new - old;
1486 call_rcu(old_bitmap, migration_bitmap_free, rcu);
1491 * 'expected' is the value you expect the bitmap mostly to be full
1492 * of; it won't bother printing lines that are all this value.
1493 * If 'todump' is null the migration bitmap is dumped.
1495 void ram_debug_dump_bitmap(unsigned long *todump, bool expected)
1497 int64_t ram_pages = last_ram_offset() >> TARGET_PAGE_BITS;
1499 int64_t cur;
1500 int64_t linelen = 128;
1501 char linebuf[129];
1503 if (!todump) {
1504 todump = atomic_rcu_read(&migration_bitmap_rcu)->bmap;
1507 for (cur = 0; cur < ram_pages; cur += linelen) {
1508 int64_t curb;
1509 bool found = false;
1511 * Last line; catch the case where the line length
1512 * is longer than remaining ram
1514 if (cur + linelen > ram_pages) {
1515 linelen = ram_pages - cur;
1517 for (curb = 0; curb < linelen; curb++) {
1518 bool thisbit = test_bit(cur + curb, todump);
1519 linebuf[curb] = thisbit ? '1' : '.';
1520 found = found || (thisbit != expected);
1522 if (found) {
1523 linebuf[curb] = '\0';
1524 fprintf(stderr, "0x%08" PRIx64 " : %s\n", cur, linebuf);
1529 /* **** functions for postcopy ***** */
1532 * Callback from postcopy_each_ram_send_discard for each RAMBlock
1533 * Note: At this point the 'unsentmap' is the processed bitmap combined
1534 * with the dirtymap; so a '1' means it's either dirty or unsent.
1535 * start,length: Indexes into the bitmap for the first bit
1536 * representing the named block and length in target-pages
1538 static int postcopy_send_discard_bm_ram(MigrationState *ms,
1539 PostcopyDiscardState *pds,
1540 unsigned long start,
1541 unsigned long length)
1543 unsigned long end = start + length; /* one after the end */
1544 unsigned long current;
1545 unsigned long *unsentmap;
1547 unsentmap = atomic_rcu_read(&migration_bitmap_rcu)->unsentmap;
1548 for (current = start; current < end; ) {
1549 unsigned long one = find_next_bit(unsentmap, end, current);
1551 if (one <= end) {
1552 unsigned long zero = find_next_zero_bit(unsentmap, end, one + 1);
1553 unsigned long discard_length;
1555 if (zero >= end) {
1556 discard_length = end - one;
1557 } else {
1558 discard_length = zero - one;
1560 postcopy_discard_send_range(ms, pds, one, discard_length);
1561 current = one + discard_length;
1562 } else {
1563 current = one;
1567 return 0;
1571 * Utility for the outgoing postcopy code.
1572 * Calls postcopy_send_discard_bm_ram for each RAMBlock
1573 * passing it bitmap indexes and name.
1574 * Returns: 0 on success
1575 * (qemu_ram_foreach_block ends up passing unscaled lengths
1576 * which would mean postcopy code would have to deal with target page)
1578 static int postcopy_each_ram_send_discard(MigrationState *ms)
1580 struct RAMBlock *block;
1581 int ret;
1583 QLIST_FOREACH_RCU(block, &ram_list.blocks, next) {
1584 unsigned long first = block->offset >> TARGET_PAGE_BITS;
1585 PostcopyDiscardState *pds = postcopy_discard_send_init(ms,
1586 first,
1587 block->idstr);
1590 * Postcopy sends chunks of bitmap over the wire, but it
1591 * just needs indexes at this point, avoids it having
1592 * target page specific code.
1594 ret = postcopy_send_discard_bm_ram(ms, pds, first,
1595 block->used_length >> TARGET_PAGE_BITS);
1596 postcopy_discard_send_finish(ms, pds);
1597 if (ret) {
1598 return ret;
1602 return 0;
1606 * Helper for postcopy_chunk_hostpages; it's called twice to cleanup
1607 * the two bitmaps, that are similar, but one is inverted.
1609 * We search for runs of target-pages that don't start or end on a
1610 * host page boundary;
1611 * unsent_pass=true: Cleans up partially unsent host pages by searching
1612 * the unsentmap
1613 * unsent_pass=false: Cleans up partially dirty host pages by searching
1614 * the main migration bitmap
1617 static void postcopy_chunk_hostpages_pass(MigrationState *ms, bool unsent_pass,
1618 RAMBlock *block,
1619 PostcopyDiscardState *pds)
1621 unsigned long *bitmap;
1622 unsigned long *unsentmap;
1623 unsigned int host_ratio = qemu_host_page_size / TARGET_PAGE_SIZE;
1624 unsigned long first = block->offset >> TARGET_PAGE_BITS;
1625 unsigned long len = block->used_length >> TARGET_PAGE_BITS;
1626 unsigned long last = first + (len - 1);
1627 unsigned long run_start;
1629 bitmap = atomic_rcu_read(&migration_bitmap_rcu)->bmap;
1630 unsentmap = atomic_rcu_read(&migration_bitmap_rcu)->unsentmap;
1632 if (unsent_pass) {
1633 /* Find a sent page */
1634 run_start = find_next_zero_bit(unsentmap, last + 1, first);
1635 } else {
1636 /* Find a dirty page */
1637 run_start = find_next_bit(bitmap, last + 1, first);
1640 while (run_start <= last) {
1641 bool do_fixup = false;
1642 unsigned long fixup_start_addr;
1643 unsigned long host_offset;
1646 * If the start of this run of pages is in the middle of a host
1647 * page, then we need to fixup this host page.
1649 host_offset = run_start % host_ratio;
1650 if (host_offset) {
1651 do_fixup = true;
1652 run_start -= host_offset;
1653 fixup_start_addr = run_start;
1654 /* For the next pass */
1655 run_start = run_start + host_ratio;
1656 } else {
1657 /* Find the end of this run */
1658 unsigned long run_end;
1659 if (unsent_pass) {
1660 run_end = find_next_bit(unsentmap, last + 1, run_start + 1);
1661 } else {
1662 run_end = find_next_zero_bit(bitmap, last + 1, run_start + 1);
1665 * If the end isn't at the start of a host page, then the
1666 * run doesn't finish at the end of a host page
1667 * and we need to discard.
1669 host_offset = run_end % host_ratio;
1670 if (host_offset) {
1671 do_fixup = true;
1672 fixup_start_addr = run_end - host_offset;
1674 * This host page has gone, the next loop iteration starts
1675 * from after the fixup
1677 run_start = fixup_start_addr + host_ratio;
1678 } else {
1680 * No discards on this iteration, next loop starts from
1681 * next sent/dirty page
1683 run_start = run_end + 1;
1687 if (do_fixup) {
1688 unsigned long page;
1690 /* Tell the destination to discard this page */
1691 if (unsent_pass || !test_bit(fixup_start_addr, unsentmap)) {
1692 /* For the unsent_pass we:
1693 * discard partially sent pages
1694 * For the !unsent_pass (dirty) we:
1695 * discard partially dirty pages that were sent
1696 * (any partially sent pages were already discarded
1697 * by the previous unsent_pass)
1699 postcopy_discard_send_range(ms, pds, fixup_start_addr,
1700 host_ratio);
1703 /* Clean up the bitmap */
1704 for (page = fixup_start_addr;
1705 page < fixup_start_addr + host_ratio; page++) {
1706 /* All pages in this host page are now not sent */
1707 set_bit(page, unsentmap);
1710 * Remark them as dirty, updating the count for any pages
1711 * that weren't previously dirty.
1713 migration_dirty_pages += !test_and_set_bit(page, bitmap);
1717 if (unsent_pass) {
1718 /* Find the next sent page for the next iteration */
1719 run_start = find_next_zero_bit(unsentmap, last + 1,
1720 run_start);
1721 } else {
1722 /* Find the next dirty page for the next iteration */
1723 run_start = find_next_bit(bitmap, last + 1, run_start);
1729 * Utility for the outgoing postcopy code.
1731 * Discard any partially sent host-page size chunks, mark any partially
1732 * dirty host-page size chunks as all dirty.
1734 * Returns: 0 on success
1736 static int postcopy_chunk_hostpages(MigrationState *ms)
1738 struct RAMBlock *block;
1740 if (qemu_host_page_size == TARGET_PAGE_SIZE) {
1741 /* Easy case - TPS==HPS - nothing to be done */
1742 return 0;
1745 /* Easiest way to make sure we don't resume in the middle of a host-page */
1746 last_seen_block = NULL;
1747 last_sent_block = NULL;
1748 last_offset = 0;
1750 QLIST_FOREACH_RCU(block, &ram_list.blocks, next) {
1751 unsigned long first = block->offset >> TARGET_PAGE_BITS;
1753 PostcopyDiscardState *pds =
1754 postcopy_discard_send_init(ms, first, block->idstr);
1756 /* First pass: Discard all partially sent host pages */
1757 postcopy_chunk_hostpages_pass(ms, true, block, pds);
1759 * Second pass: Ensure that all partially dirty host pages are made
1760 * fully dirty.
1762 postcopy_chunk_hostpages_pass(ms, false, block, pds);
1764 postcopy_discard_send_finish(ms, pds);
1765 } /* ram_list loop */
1767 return 0;
1771 * Transmit the set of pages to be discarded after precopy to the target
1772 * these are pages that:
1773 * a) Have been previously transmitted but are now dirty again
1774 * b) Pages that have never been transmitted, this ensures that
1775 * any pages on the destination that have been mapped by background
1776 * tasks get discarded (transparent huge pages is the specific concern)
1777 * Hopefully this is pretty sparse
1779 int ram_postcopy_send_discard_bitmap(MigrationState *ms)
1781 int ret;
1782 unsigned long *bitmap, *unsentmap;
1784 rcu_read_lock();
1786 /* This should be our last sync, the src is now paused */
1787 migration_bitmap_sync();
1789 unsentmap = atomic_rcu_read(&migration_bitmap_rcu)->unsentmap;
1790 if (!unsentmap) {
1791 /* We don't have a safe way to resize the sentmap, so
1792 * if the bitmap was resized it will be NULL at this
1793 * point.
1795 error_report("migration ram resized during precopy phase");
1796 rcu_read_unlock();
1797 return -EINVAL;
1800 /* Deal with TPS != HPS */
1801 ret = postcopy_chunk_hostpages(ms);
1802 if (ret) {
1803 rcu_read_unlock();
1804 return ret;
1808 * Update the unsentmap to be unsentmap = unsentmap | dirty
1810 bitmap = atomic_rcu_read(&migration_bitmap_rcu)->bmap;
1811 bitmap_or(unsentmap, unsentmap, bitmap,
1812 last_ram_offset() >> TARGET_PAGE_BITS);
1815 trace_ram_postcopy_send_discard_bitmap();
1816 #ifdef DEBUG_POSTCOPY
1817 ram_debug_dump_bitmap(unsentmap, true);
1818 #endif
1820 ret = postcopy_each_ram_send_discard(ms);
1821 rcu_read_unlock();
1823 return ret;
1827 * At the start of the postcopy phase of migration, any now-dirty
1828 * precopied pages are discarded.
1830 * start, length describe a byte address range within the RAMBlock
1832 * Returns 0 on success.
1834 int ram_discard_range(MigrationIncomingState *mis,
1835 const char *block_name,
1836 uint64_t start, size_t length)
1838 int ret = -1;
1840 rcu_read_lock();
1841 RAMBlock *rb = qemu_ram_block_by_name(block_name);
1843 if (!rb) {
1844 error_report("ram_discard_range: Failed to find block '%s'",
1845 block_name);
1846 goto err;
1849 uint8_t *host_startaddr = rb->host + start;
1851 if ((uintptr_t)host_startaddr & (qemu_host_page_size - 1)) {
1852 error_report("ram_discard_range: Unaligned start address: %p",
1853 host_startaddr);
1854 goto err;
1857 if ((start + length) <= rb->used_length) {
1858 uint8_t *host_endaddr = host_startaddr + length;
1859 if ((uintptr_t)host_endaddr & (qemu_host_page_size - 1)) {
1860 error_report("ram_discard_range: Unaligned end address: %p",
1861 host_endaddr);
1862 goto err;
1864 ret = postcopy_ram_discard_range(mis, host_startaddr, length);
1865 } else {
1866 error_report("ram_discard_range: Overrun block '%s' (%" PRIu64
1867 "/%zx/" RAM_ADDR_FMT")",
1868 block_name, start, length, rb->used_length);
1871 err:
1872 rcu_read_unlock();
1874 return ret;
1878 /* Each of ram_save_setup, ram_save_iterate and ram_save_complete has
1879 * long-running RCU critical section. When rcu-reclaims in the code
1880 * start to become numerous it will be necessary to reduce the
1881 * granularity of these critical sections.
1884 static int ram_save_setup(QEMUFile *f, void *opaque)
1886 RAMBlock *block;
1887 int64_t ram_bitmap_pages; /* Size of bitmap in pages, including gaps */
1889 dirty_rate_high_cnt = 0;
1890 bitmap_sync_count = 0;
1891 migration_bitmap_sync_init();
1892 qemu_mutex_init(&migration_bitmap_mutex);
1894 if (migrate_use_xbzrle()) {
1895 XBZRLE_cache_lock();
1896 XBZRLE.cache = cache_init(migrate_xbzrle_cache_size() /
1897 TARGET_PAGE_SIZE,
1898 TARGET_PAGE_SIZE);
1899 if (!XBZRLE.cache) {
1900 XBZRLE_cache_unlock();
1901 error_report("Error creating cache");
1902 return -1;
1904 XBZRLE_cache_unlock();
1906 /* We prefer not to abort if there is no memory */
1907 XBZRLE.encoded_buf = g_try_malloc0(TARGET_PAGE_SIZE);
1908 if (!XBZRLE.encoded_buf) {
1909 error_report("Error allocating encoded_buf");
1910 return -1;
1913 XBZRLE.current_buf = g_try_malloc(TARGET_PAGE_SIZE);
1914 if (!XBZRLE.current_buf) {
1915 error_report("Error allocating current_buf");
1916 g_free(XBZRLE.encoded_buf);
1917 XBZRLE.encoded_buf = NULL;
1918 return -1;
1921 acct_clear();
1924 /* For memory_global_dirty_log_start below. */
1925 qemu_mutex_lock_iothread();
1927 qemu_mutex_lock_ramlist();
1928 rcu_read_lock();
1929 bytes_transferred = 0;
1930 reset_ram_globals();
1932 ram_bitmap_pages = last_ram_offset() >> TARGET_PAGE_BITS;
1933 migration_bitmap_rcu = g_new0(struct BitmapRcu, 1);
1934 migration_bitmap_rcu->bmap = bitmap_new(ram_bitmap_pages);
1935 bitmap_set(migration_bitmap_rcu->bmap, 0, ram_bitmap_pages);
1937 if (migrate_postcopy_ram()) {
1938 migration_bitmap_rcu->unsentmap = bitmap_new(ram_bitmap_pages);
1939 bitmap_set(migration_bitmap_rcu->unsentmap, 0, ram_bitmap_pages);
1943 * Count the total number of pages used by ram blocks not including any
1944 * gaps due to alignment or unplugs.
1946 migration_dirty_pages = ram_bytes_total() >> TARGET_PAGE_BITS;
1948 memory_global_dirty_log_start();
1949 migration_bitmap_sync();
1950 qemu_mutex_unlock_ramlist();
1951 qemu_mutex_unlock_iothread();
1953 qemu_put_be64(f, ram_bytes_total() | RAM_SAVE_FLAG_MEM_SIZE);
1955 QLIST_FOREACH_RCU(block, &ram_list.blocks, next) {
1956 qemu_put_byte(f, strlen(block->idstr));
1957 qemu_put_buffer(f, (uint8_t *)block->idstr, strlen(block->idstr));
1958 qemu_put_be64(f, block->used_length);
1961 rcu_read_unlock();
1963 ram_control_before_iterate(f, RAM_CONTROL_SETUP);
1964 ram_control_after_iterate(f, RAM_CONTROL_SETUP);
1966 qemu_put_be64(f, RAM_SAVE_FLAG_EOS);
1968 return 0;
1971 static int ram_save_iterate(QEMUFile *f, void *opaque)
1973 int ret;
1974 int i;
1975 int64_t t0;
1976 int pages_sent = 0;
1978 rcu_read_lock();
1979 if (ram_list.version != last_version) {
1980 reset_ram_globals();
1983 /* Read version before ram_list.blocks */
1984 smp_rmb();
1986 ram_control_before_iterate(f, RAM_CONTROL_ROUND);
1988 t0 = qemu_clock_get_ns(QEMU_CLOCK_REALTIME);
1989 i = 0;
1990 while ((ret = qemu_file_rate_limit(f)) == 0) {
1991 int pages;
1993 pages = ram_find_and_save_block(f, false, &bytes_transferred);
1994 /* no more pages to sent */
1995 if (pages == 0) {
1996 break;
1998 pages_sent += pages;
1999 acct_info.iterations++;
2001 /* we want to check in the 1st loop, just in case it was the 1st time
2002 and we had to sync the dirty bitmap.
2003 qemu_get_clock_ns() is a bit expensive, so we only check each some
2004 iterations
2006 if ((i & 63) == 0) {
2007 uint64_t t1 = (qemu_clock_get_ns(QEMU_CLOCK_REALTIME) - t0) / 1000000;
2008 if (t1 > MAX_WAIT) {
2009 DPRINTF("big wait: %" PRIu64 " milliseconds, %d iterations\n",
2010 t1, i);
2011 break;
2014 i++;
2016 flush_compressed_data(f);
2017 rcu_read_unlock();
2020 * Must occur before EOS (or any QEMUFile operation)
2021 * because of RDMA protocol.
2023 ram_control_after_iterate(f, RAM_CONTROL_ROUND);
2025 qemu_put_be64(f, RAM_SAVE_FLAG_EOS);
2026 bytes_transferred += 8;
2028 ret = qemu_file_get_error(f);
2029 if (ret < 0) {
2030 return ret;
2033 return pages_sent;
2036 /* Called with iothread lock */
2037 static int ram_save_complete(QEMUFile *f, void *opaque)
2039 rcu_read_lock();
2041 if (!migration_in_postcopy(migrate_get_current())) {
2042 migration_bitmap_sync();
2045 ram_control_before_iterate(f, RAM_CONTROL_FINISH);
2047 /* try transferring iterative blocks of memory */
2049 /* flush all remaining blocks regardless of rate limiting */
2050 while (true) {
2051 int pages;
2053 pages = ram_find_and_save_block(f, true, &bytes_transferred);
2054 /* no more blocks to sent */
2055 if (pages == 0) {
2056 break;
2060 flush_compressed_data(f);
2061 ram_control_after_iterate(f, RAM_CONTROL_FINISH);
2063 rcu_read_unlock();
2065 qemu_put_be64(f, RAM_SAVE_FLAG_EOS);
2067 return 0;
2070 static void ram_save_pending(QEMUFile *f, void *opaque, uint64_t max_size,
2071 uint64_t *non_postcopiable_pending,
2072 uint64_t *postcopiable_pending)
2074 uint64_t remaining_size;
2076 remaining_size = ram_save_remaining() * TARGET_PAGE_SIZE;
2078 if (!migration_in_postcopy(migrate_get_current()) &&
2079 remaining_size < max_size) {
2080 qemu_mutex_lock_iothread();
2081 rcu_read_lock();
2082 migration_bitmap_sync();
2083 rcu_read_unlock();
2084 qemu_mutex_unlock_iothread();
2085 remaining_size = ram_save_remaining() * TARGET_PAGE_SIZE;
2088 /* We can do postcopy, and all the data is postcopiable */
2089 *postcopiable_pending += remaining_size;
2092 static int load_xbzrle(QEMUFile *f, ram_addr_t addr, void *host)
2094 unsigned int xh_len;
2095 int xh_flags;
2096 uint8_t *loaded_data;
2098 if (!xbzrle_decoded_buf) {
2099 xbzrle_decoded_buf = g_malloc(TARGET_PAGE_SIZE);
2101 loaded_data = xbzrle_decoded_buf;
2103 /* extract RLE header */
2104 xh_flags = qemu_get_byte(f);
2105 xh_len = qemu_get_be16(f);
2107 if (xh_flags != ENCODING_FLAG_XBZRLE) {
2108 error_report("Failed to load XBZRLE page - wrong compression!");
2109 return -1;
2112 if (xh_len > TARGET_PAGE_SIZE) {
2113 error_report("Failed to load XBZRLE page - len overflow!");
2114 return -1;
2116 /* load data and decode */
2117 qemu_get_buffer_in_place(f, &loaded_data, xh_len);
2119 /* decode RLE */
2120 if (xbzrle_decode_buffer(loaded_data, xh_len, host,
2121 TARGET_PAGE_SIZE) == -1) {
2122 error_report("Failed to load XBZRLE page - decode error!");
2123 return -1;
2126 return 0;
2129 /* Must be called from within a rcu critical section.
2130 * Returns a pointer from within the RCU-protected ram_list.
2133 * Read a RAMBlock ID from the stream f.
2135 * f: Stream to read from
2136 * flags: Page flags (mostly to see if it's a continuation of previous block)
2138 static inline RAMBlock *ram_block_from_stream(QEMUFile *f,
2139 int flags)
2141 static RAMBlock *block = NULL;
2142 char id[256];
2143 uint8_t len;
2145 if (flags & RAM_SAVE_FLAG_CONTINUE) {
2146 if (!block) {
2147 error_report("Ack, bad migration stream!");
2148 return NULL;
2150 return block;
2153 len = qemu_get_byte(f);
2154 qemu_get_buffer(f, (uint8_t *)id, len);
2155 id[len] = 0;
2157 block = qemu_ram_block_by_name(id);
2158 if (!block) {
2159 error_report("Can't find block %s", id);
2160 return NULL;
2163 return block;
2166 static inline void *host_from_ram_block_offset(RAMBlock *block,
2167 ram_addr_t offset)
2169 if (!offset_in_ramblock(block, offset)) {
2170 return NULL;
2173 return block->host + offset;
2177 * If a page (or a whole RDMA chunk) has been
2178 * determined to be zero, then zap it.
2180 void ram_handle_compressed(void *host, uint8_t ch, uint64_t size)
2182 if (ch != 0 || !is_zero_range(host, size)) {
2183 memset(host, ch, size);
2187 static void *do_data_decompress(void *opaque)
2189 DecompressParam *param = opaque;
2190 unsigned long pagesize;
2192 while (!quit_decomp_thread) {
2193 qemu_mutex_lock(&param->mutex);
2194 while (!param->start && !quit_decomp_thread) {
2195 qemu_cond_wait(&param->cond, &param->mutex);
2196 pagesize = TARGET_PAGE_SIZE;
2197 if (!quit_decomp_thread) {
2198 /* uncompress() will return failed in some case, especially
2199 * when the page is dirted when doing the compression, it's
2200 * not a problem because the dirty page will be retransferred
2201 * and uncompress() won't break the data in other pages.
2203 uncompress((Bytef *)param->des, &pagesize,
2204 (const Bytef *)param->compbuf, param->len);
2206 param->start = false;
2208 qemu_mutex_unlock(&param->mutex);
2211 return NULL;
2214 void migrate_decompress_threads_create(void)
2216 int i, thread_count;
2218 thread_count = migrate_decompress_threads();
2219 decompress_threads = g_new0(QemuThread, thread_count);
2220 decomp_param = g_new0(DecompressParam, thread_count);
2221 quit_decomp_thread = false;
2222 for (i = 0; i < thread_count; i++) {
2223 qemu_mutex_init(&decomp_param[i].mutex);
2224 qemu_cond_init(&decomp_param[i].cond);
2225 decomp_param[i].compbuf = g_malloc0(compressBound(TARGET_PAGE_SIZE));
2226 qemu_thread_create(decompress_threads + i, "decompress",
2227 do_data_decompress, decomp_param + i,
2228 QEMU_THREAD_JOINABLE);
2232 void migrate_decompress_threads_join(void)
2234 int i, thread_count;
2236 quit_decomp_thread = true;
2237 thread_count = migrate_decompress_threads();
2238 for (i = 0; i < thread_count; i++) {
2239 qemu_mutex_lock(&decomp_param[i].mutex);
2240 qemu_cond_signal(&decomp_param[i].cond);
2241 qemu_mutex_unlock(&decomp_param[i].mutex);
2243 for (i = 0; i < thread_count; i++) {
2244 qemu_thread_join(decompress_threads + i);
2245 qemu_mutex_destroy(&decomp_param[i].mutex);
2246 qemu_cond_destroy(&decomp_param[i].cond);
2247 g_free(decomp_param[i].compbuf);
2249 g_free(decompress_threads);
2250 g_free(decomp_param);
2251 decompress_threads = NULL;
2252 decomp_param = NULL;
2255 static void decompress_data_with_multi_threads(QEMUFile *f,
2256 void *host, int len)
2258 int idx, thread_count;
2260 thread_count = migrate_decompress_threads();
2261 while (true) {
2262 for (idx = 0; idx < thread_count; idx++) {
2263 if (!decomp_param[idx].start) {
2264 qemu_get_buffer(f, decomp_param[idx].compbuf, len);
2265 decomp_param[idx].des = host;
2266 decomp_param[idx].len = len;
2267 start_decompression(&decomp_param[idx]);
2268 break;
2271 if (idx < thread_count) {
2272 break;
2278 * Allocate data structures etc needed by incoming migration with postcopy-ram
2279 * postcopy-ram's similarly names postcopy_ram_incoming_init does the work
2281 int ram_postcopy_incoming_init(MigrationIncomingState *mis)
2283 size_t ram_pages = last_ram_offset() >> TARGET_PAGE_BITS;
2285 return postcopy_ram_incoming_init(mis, ram_pages);
2289 * Called in postcopy mode by ram_load().
2290 * rcu_read_lock is taken prior to this being called.
2292 static int ram_load_postcopy(QEMUFile *f)
2294 int flags = 0, ret = 0;
2295 bool place_needed = false;
2296 bool matching_page_sizes = qemu_host_page_size == TARGET_PAGE_SIZE;
2297 MigrationIncomingState *mis = migration_incoming_get_current();
2298 /* Temporary page that is later 'placed' */
2299 void *postcopy_host_page = postcopy_get_tmp_page(mis);
2300 void *last_host = NULL;
2301 bool all_zero = false;
2303 while (!ret && !(flags & RAM_SAVE_FLAG_EOS)) {
2304 ram_addr_t addr;
2305 void *host = NULL;
2306 void *page_buffer = NULL;
2307 void *place_source = NULL;
2308 uint8_t ch;
2310 addr = qemu_get_be64(f);
2311 flags = addr & ~TARGET_PAGE_MASK;
2312 addr &= TARGET_PAGE_MASK;
2314 trace_ram_load_postcopy_loop((uint64_t)addr, flags);
2315 place_needed = false;
2316 if (flags & (RAM_SAVE_FLAG_COMPRESS | RAM_SAVE_FLAG_PAGE)) {
2317 RAMBlock *block = ram_block_from_stream(f, flags);
2319 host = host_from_ram_block_offset(block, addr);
2320 if (!host) {
2321 error_report("Illegal RAM offset " RAM_ADDR_FMT, addr);
2322 ret = -EINVAL;
2323 break;
2325 page_buffer = host;
2327 * Postcopy requires that we place whole host pages atomically.
2328 * To make it atomic, the data is read into a temporary page
2329 * that's moved into place later.
2330 * The migration protocol uses, possibly smaller, target-pages
2331 * however the source ensures it always sends all the components
2332 * of a host page in order.
2334 page_buffer = postcopy_host_page +
2335 ((uintptr_t)host & ~qemu_host_page_mask);
2336 /* If all TP are zero then we can optimise the place */
2337 if (!((uintptr_t)host & ~qemu_host_page_mask)) {
2338 all_zero = true;
2339 } else {
2340 /* not the 1st TP within the HP */
2341 if (host != (last_host + TARGET_PAGE_SIZE)) {
2342 error_report("Non-sequential target page %p/%p",
2343 host, last_host);
2344 ret = -EINVAL;
2345 break;
2351 * If it's the last part of a host page then we place the host
2352 * page
2354 place_needed = (((uintptr_t)host + TARGET_PAGE_SIZE) &
2355 ~qemu_host_page_mask) == 0;
2356 place_source = postcopy_host_page;
2358 last_host = host;
2360 switch (flags & ~RAM_SAVE_FLAG_CONTINUE) {
2361 case RAM_SAVE_FLAG_COMPRESS:
2362 ch = qemu_get_byte(f);
2363 memset(page_buffer, ch, TARGET_PAGE_SIZE);
2364 if (ch) {
2365 all_zero = false;
2367 break;
2369 case RAM_SAVE_FLAG_PAGE:
2370 all_zero = false;
2371 if (!place_needed || !matching_page_sizes) {
2372 qemu_get_buffer(f, page_buffer, TARGET_PAGE_SIZE);
2373 } else {
2374 /* Avoids the qemu_file copy during postcopy, which is
2375 * going to do a copy later; can only do it when we
2376 * do this read in one go (matching page sizes)
2378 qemu_get_buffer_in_place(f, (uint8_t **)&place_source,
2379 TARGET_PAGE_SIZE);
2381 break;
2382 case RAM_SAVE_FLAG_EOS:
2383 /* normal exit */
2384 break;
2385 default:
2386 error_report("Unknown combination of migration flags: %#x"
2387 " (postcopy mode)", flags);
2388 ret = -EINVAL;
2391 if (place_needed) {
2392 /* This gets called at the last target page in the host page */
2393 if (all_zero) {
2394 ret = postcopy_place_page_zero(mis,
2395 host + TARGET_PAGE_SIZE -
2396 qemu_host_page_size);
2397 } else {
2398 ret = postcopy_place_page(mis, host + TARGET_PAGE_SIZE -
2399 qemu_host_page_size,
2400 place_source);
2403 if (!ret) {
2404 ret = qemu_file_get_error(f);
2408 return ret;
2411 static int ram_load(QEMUFile *f, void *opaque, int version_id)
2413 int flags = 0, ret = 0;
2414 static uint64_t seq_iter;
2415 int len = 0;
2417 * If system is running in postcopy mode, page inserts to host memory must
2418 * be atomic
2420 bool postcopy_running = postcopy_state_get() >= POSTCOPY_INCOMING_LISTENING;
2422 seq_iter++;
2424 if (version_id != 4) {
2425 ret = -EINVAL;
2428 /* This RCU critical section can be very long running.
2429 * When RCU reclaims in the code start to become numerous,
2430 * it will be necessary to reduce the granularity of this
2431 * critical section.
2433 rcu_read_lock();
2435 if (postcopy_running) {
2436 ret = ram_load_postcopy(f);
2439 while (!postcopy_running && !ret && !(flags & RAM_SAVE_FLAG_EOS)) {
2440 ram_addr_t addr, total_ram_bytes;
2441 void *host = NULL;
2442 uint8_t ch;
2444 addr = qemu_get_be64(f);
2445 flags = addr & ~TARGET_PAGE_MASK;
2446 addr &= TARGET_PAGE_MASK;
2448 if (flags & (RAM_SAVE_FLAG_COMPRESS | RAM_SAVE_FLAG_PAGE |
2449 RAM_SAVE_FLAG_COMPRESS_PAGE | RAM_SAVE_FLAG_XBZRLE)) {
2450 RAMBlock *block = ram_block_from_stream(f, flags);
2452 host = host_from_ram_block_offset(block, addr);
2453 if (!host) {
2454 error_report("Illegal RAM offset " RAM_ADDR_FMT, addr);
2455 ret = -EINVAL;
2456 break;
2460 switch (flags & ~RAM_SAVE_FLAG_CONTINUE) {
2461 case RAM_SAVE_FLAG_MEM_SIZE:
2462 /* Synchronize RAM block list */
2463 total_ram_bytes = addr;
2464 while (!ret && total_ram_bytes) {
2465 RAMBlock *block;
2466 char id[256];
2467 ram_addr_t length;
2469 len = qemu_get_byte(f);
2470 qemu_get_buffer(f, (uint8_t *)id, len);
2471 id[len] = 0;
2472 length = qemu_get_be64(f);
2474 block = qemu_ram_block_by_name(id);
2475 if (block) {
2476 if (length != block->used_length) {
2477 Error *local_err = NULL;
2479 ret = qemu_ram_resize(block, length,
2480 &local_err);
2481 if (local_err) {
2482 error_report_err(local_err);
2485 ram_control_load_hook(f, RAM_CONTROL_BLOCK_REG,
2486 block->idstr);
2487 } else {
2488 error_report("Unknown ramblock \"%s\", cannot "
2489 "accept migration", id);
2490 ret = -EINVAL;
2493 total_ram_bytes -= length;
2495 break;
2497 case RAM_SAVE_FLAG_COMPRESS:
2498 ch = qemu_get_byte(f);
2499 ram_handle_compressed(host, ch, TARGET_PAGE_SIZE);
2500 break;
2502 case RAM_SAVE_FLAG_PAGE:
2503 qemu_get_buffer(f, host, TARGET_PAGE_SIZE);
2504 break;
2506 case RAM_SAVE_FLAG_COMPRESS_PAGE:
2507 len = qemu_get_be32(f);
2508 if (len < 0 || len > compressBound(TARGET_PAGE_SIZE)) {
2509 error_report("Invalid compressed data length: %d", len);
2510 ret = -EINVAL;
2511 break;
2513 decompress_data_with_multi_threads(f, host, len);
2514 break;
2516 case RAM_SAVE_FLAG_XBZRLE:
2517 if (load_xbzrle(f, addr, host) < 0) {
2518 error_report("Failed to decompress XBZRLE page at "
2519 RAM_ADDR_FMT, addr);
2520 ret = -EINVAL;
2521 break;
2523 break;
2524 case RAM_SAVE_FLAG_EOS:
2525 /* normal exit */
2526 break;
2527 default:
2528 if (flags & RAM_SAVE_FLAG_HOOK) {
2529 ram_control_load_hook(f, RAM_CONTROL_HOOK, NULL);
2530 } else {
2531 error_report("Unknown combination of migration flags: %#x",
2532 flags);
2533 ret = -EINVAL;
2536 if (!ret) {
2537 ret = qemu_file_get_error(f);
2541 rcu_read_unlock();
2542 DPRINTF("Completed load of VM with exit code %d seq iteration "
2543 "%" PRIu64 "\n", ret, seq_iter);
2544 return ret;
2547 static SaveVMHandlers savevm_ram_handlers = {
2548 .save_live_setup = ram_save_setup,
2549 .save_live_iterate = ram_save_iterate,
2550 .save_live_complete_postcopy = ram_save_complete,
2551 .save_live_complete_precopy = ram_save_complete,
2552 .save_live_pending = ram_save_pending,
2553 .load_state = ram_load,
2554 .cleanup = ram_migration_cleanup,
2557 void ram_mig_init(void)
2559 qemu_mutex_init(&XBZRLE.lock);
2560 register_savevm_live(NULL, "ram", 0, 4, &savevm_ram_handlers, NULL);