include/fpu/softfloat.h

   1 /*
   2  * QEMU float support
   3  *
   4  * The code in this source file is derived from release 2a of the SoftFloat
   5  * IEC/IEEE Floating-point Arithmetic Package. Those parts of the code (and
   6  * some later contributions) are provided under that license, as detailed below.
   7  * It has subsequently been modified by contributors to the QEMU Project,
   8  * so some portions are provided under:
   9  *  the SoftFloat-2a license
  10  *  the BSD license
  11  *  GPL-v2-or-later
  12  *
  13  * Any future contributions to this file after December 1st 2014 will be
  14  * taken to be licensed under the Softfloat-2a license unless specifically
  15  * indicated otherwise.
  16  */
  17
  18 /*
  19 ===============================================================================
  20 This C header file is part of the SoftFloat IEC/IEEE Floating-point
  21 Arithmetic Package, Release 2a.
  22
  23 Written by John R. Hauser.  This work was made possible in part by the
  24 International Computer Science Institute, located at Suite 600, 1947 Center
  25 Street, Berkeley, California 94704.  Funding was partially provided by the
  26 National Science Foundation under grant MIP-9311980.  The original version
  27 of this code was written as part of a project to build a fixed-point vector
  28 processor in collaboration with the University of California at Berkeley,
  29 overseen by Profs. Nelson Morgan and John Wawrzynek.  More information
  30 is available through the Web page `http://HTTP.CS.Berkeley.EDU/~jhauser/
  31 arithmetic/SoftFloat.html'.
  32
  33 THIS SOFTWARE IS DISTRIBUTED AS IS, FOR FREE.  Although reasonable effort
  34 has been made to avoid it, THIS SOFTWARE MAY CONTAIN FAULTS THAT WILL AT
  35 TIMES RESULT IN INCORRECT BEHAVIOR.  USE OF THIS SOFTWARE IS RESTRICTED TO
  36 PERSONS AND ORGANIZATIONS WHO CAN AND WILL TAKE FULL RESPONSIBILITY FOR ANY
  37 AND ALL LOSSES, COSTS, OR OTHER PROBLEMS ARISING FROM ITS USE.
  38
  39 Derivative works are acceptable, even for commercial purposes, so long as
  40 (1) they include prominent notice that the work is derivative, and (2) they
  41 include prominent notice akin to these four paragraphs for those parts of
  42 this code that are retained.
  43
  44 ===============================================================================
  45 */
  46
  47 /* BSD licensing:
  48  * Copyright (c) 2006, Fabrice Bellard
  49  * All rights reserved.
  50  *
  51  * Redistribution and use in source and binary forms, with or without
  52  * modification, are permitted provided that the following conditions are met:
  53  *
  54  * 1. Redistributions of source code must retain the above copyright notice,
  55  * this list of conditions and the following disclaimer.
  56  *
  57  * 2. Redistributions in binary form must reproduce the above copyright notice,
  58  * this list of conditions and the following disclaimer in the documentation
  59  * and/or other materials provided with the distribution.
  60  *
  61  * 3. Neither the name of the copyright holder nor the names of its contributors
  62  * may be used to endorse or promote products derived from this software without
  63  * specific prior written permission.
  64  *
  65  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  66  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  67  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  68  * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
  69  * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
  70  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
  71  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
  72  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
  73  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
  74  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
  75  * THE POSSIBILITY OF SUCH DAMAGE.
  76  */
  77
  78 /* Portions of this work are licensed under the terms of the GNU GPL,
  79  * version 2 or later. See the COPYING file in the top-level directory.
  80  */
  81
  82 #ifndef SOFTFLOAT_H
  83 #define SOFTFLOAT_H
  84
  85 #define LIT64( a ) a##LL
  86
  87 /*----------------------------------------------------------------------------
  88 | Software IEC/IEEE floating-point ordering relations
  89 *----------------------------------------------------------------------------*/
  90 enum {
  91     float_relation_less      = -1,
  92     float_relation_equal     =  0,
  93     float_relation_greater   =  1,
  94     float_relation_unordered =  2
  95 };
  96
  97 #include "fpu/softfloat-types.h"
  98
  99 static inline void set_float_detect_tininess(int val, float_status *status)
 100 {
 101     status->float_detect_tininess = val;
 102 }
 103 static inline void set_float_rounding_mode(int val, float_status *status)
 104 {
 105     status->float_rounding_mode = val;
 106 }
 107 static inline void set_float_exception_flags(int val, float_status *status)
 108 {
 109     status->float_exception_flags = val;
 110 }
 111 static inline void set_floatx80_rounding_precision(int val,
 112                                                    float_status *status)
 113 {
 114     status->floatx80_rounding_precision = val;
 115 }
 116 static inline void set_flush_to_zero(flag val, float_status *status)
 117 {
 118     status->flush_to_zero = val;
 119 }
 120 static inline void set_flush_inputs_to_zero(flag val, float_status *status)
 121 {
 122     status->flush_inputs_to_zero = val;
 123 }
 124 static inline void set_default_nan_mode(flag val, float_status *status)
 125 {
 126     status->default_nan_mode = val;
 127 }
 128 static inline void set_snan_bit_is_one(flag val, float_status *status)
 129 {
 130     status->snan_bit_is_one = val;
 131 }
 132 static inline int get_float_detect_tininess(float_status *status)
 133 {
 134     return status->float_detect_tininess;
 135 }
 136 static inline int get_float_rounding_mode(float_status *status)
 137 {
 138     return status->float_rounding_mode;
 139 }
 140 static inline int get_float_exception_flags(float_status *status)
 141 {
 142     return status->float_exception_flags;
 143 }
 144 static inline int get_floatx80_rounding_precision(float_status *status)
 145 {
 146     return status->floatx80_rounding_precision;
 147 }
 148 static inline flag get_flush_to_zero(float_status *status)
 149 {
 150     return status->flush_to_zero;
 151 }
 152 static inline flag get_flush_inputs_to_zero(float_status *status)
 153 {
 154     return status->flush_inputs_to_zero;
 155 }
 156 static inline flag get_default_nan_mode(float_status *status)
 157 {
 158     return status->default_nan_mode;
 159 }
 160
 161 /*----------------------------------------------------------------------------
 162 | Routine to raise any or all of the software IEC/IEEE floating-point
 163 | exception flags.
 164 *----------------------------------------------------------------------------*/
 165 void float_raise(uint8_t flags, float_status *status);
 166
 167 /*----------------------------------------------------------------------------
 168 | If `a' is denormal and we are in flush-to-zero mode then set the
 169 | input-denormal exception and return zero. Otherwise just return the value.
 170 *----------------------------------------------------------------------------*/
 171 float16 float16_squash_input_denormal(float16 a, float_status *status);
 172 float32 float32_squash_input_denormal(float32 a, float_status *status);
 173 float64 float64_squash_input_denormal(float64 a, float_status *status);
 174
 175 /*----------------------------------------------------------------------------
 176 | Options to indicate which negations to perform in float*_muladd()
 177 | Using these differs from negating an input or output before calling
 178 | the muladd function in that this means that a NaN doesn't have its
 179 | sign bit inverted before it is propagated.
 180 | We also support halving the result before rounding, as a special
 181 | case to support the ARM fused-sqrt-step instruction FRSQRTS.
 182 *----------------------------------------------------------------------------*/
 183 enum {
 184     float_muladd_negate_c = 1,
 185     float_muladd_negate_product = 2,
 186     float_muladd_negate_result = 4,
 187     float_muladd_halve_result = 8,
 188 };
 189
 190 /*----------------------------------------------------------------------------
 191 | Software IEC/IEEE integer-to-floating-point conversion routines.
 192 *----------------------------------------------------------------------------*/
 193
 194 float16 int16_to_float16_scalbn(int16_t a, int, float_status *status);
 195 float16 int32_to_float16_scalbn(int32_t a, int, float_status *status);
 196 float16 int64_to_float16_scalbn(int64_t a, int, float_status *status);
 197 float16 uint16_to_float16_scalbn(uint16_t a, int, float_status *status);
 198 float16 uint32_to_float16_scalbn(uint32_t a, int, float_status *status);
 199 float16 uint64_to_float16_scalbn(uint64_t a, int, float_status *status);
 200
 201 float16 int16_to_float16(int16_t a, float_status *status);
 202 float16 int32_to_float16(int32_t a, float_status *status);
 203 float16 int64_to_float16(int64_t a, float_status *status);
 204 float16 uint16_to_float16(uint16_t a, float_status *status);
 205 float16 uint32_to_float16(uint32_t a, float_status *status);
 206 float16 uint64_to_float16(uint64_t a, float_status *status);
 207
 208 float32 int16_to_float32_scalbn(int16_t, int, float_status *status);
 209 float32 int32_to_float32_scalbn(int32_t, int, float_status *status);
 210 float32 int64_to_float32_scalbn(int64_t, int, float_status *status);
 211 float32 uint16_to_float32_scalbn(uint16_t, int, float_status *status);
 212 float32 uint32_to_float32_scalbn(uint32_t, int, float_status *status);
 213 float32 uint64_to_float32_scalbn(uint64_t, int, float_status *status);
 214
 215 float32 int16_to_float32(int16_t, float_status *status);
 216 float32 int32_to_float32(int32_t, float_status *status);
 217 float32 int64_to_float32(int64_t, float_status *status);
 218 float32 uint16_to_float32(uint16_t, float_status *status);
 219 float32 uint32_to_float32(uint32_t, float_status *status);
 220 float32 uint64_to_float32(uint64_t, float_status *status);
 221
 222 float64 int16_to_float64_scalbn(int16_t, int, float_status *status);
 223 float64 int32_to_float64_scalbn(int32_t, int, float_status *status);
 224 float64 int64_to_float64_scalbn(int64_t, int, float_status *status);
 225 float64 uint16_to_float64_scalbn(uint16_t, int, float_status *status);
 226 float64 uint32_to_float64_scalbn(uint32_t, int, float_status *status);
 227 float64 uint64_to_float64_scalbn(uint64_t, int, float_status *status);
 228
 229 float64 int16_to_float64(int16_t, float_status *status);
 230 float64 int32_to_float64(int32_t, float_status *status);
 231 float64 int64_to_float64(int64_t, float_status *status);
 232 float64 uint16_to_float64(uint16_t, float_status *status);
 233 float64 uint32_to_float64(uint32_t, float_status *status);
 234 float64 uint64_to_float64(uint64_t, float_status *status);
 235
 236 floatx80 int32_to_floatx80(int32_t, float_status *status);
 237 floatx80 int64_to_floatx80(int64_t, float_status *status);
 238
 239 float128 int32_to_float128(int32_t, float_status *status);
 240 float128 int64_to_float128(int64_t, float_status *status);
 241 float128 uint64_to_float128(uint64_t, float_status *status);
 242
 243 /*----------------------------------------------------------------------------
 244 | Software half-precision conversion routines.
 245 *----------------------------------------------------------------------------*/
 246
 247 float16 float32_to_float16(float32, bool ieee, float_status *status);
 248 float32 float16_to_float32(float16, bool ieee, float_status *status);
 249 float16 float64_to_float16(float64 a, bool ieee, float_status *status);
 250 float64 float16_to_float64(float16 a, bool ieee, float_status *status);
 251
 252 int16_t float16_to_int16_scalbn(float16, int, int, float_status *status);
 253 int32_t float16_to_int32_scalbn(float16, int, int, float_status *status);
 254 int64_t float16_to_int64_scalbn(float16, int, int, float_status *status);
 255
 256 int16_t float16_to_int16(float16, float_status *status);
 257 int32_t float16_to_int32(float16, float_status *status);
 258 int64_t float16_to_int64(float16, float_status *status);
 259
 260 int16_t float16_to_int16_round_to_zero(float16, float_status *status);
 261 int32_t float16_to_int32_round_to_zero(float16, float_status *status);
 262 int64_t float16_to_int64_round_to_zero(float16, float_status *status);
 263
 264 uint16_t float16_to_uint16_scalbn(float16 a, int, int, float_status *status);
 265 uint32_t float16_to_uint32_scalbn(float16 a, int, int, float_status *status);
 266 uint64_t float16_to_uint64_scalbn(float16 a, int, int, float_status *status);
 267
 268 uint16_t float16_to_uint16(float16 a, float_status *status);
 269 uint32_t float16_to_uint32(float16 a, float_status *status);
 270 uint64_t float16_to_uint64(float16 a, float_status *status);
 271
 272 uint16_t float16_to_uint16_round_to_zero(float16 a, float_status *status);
 273 uint32_t float16_to_uint32_round_to_zero(float16 a, float_status *status);
 274 uint64_t float16_to_uint64_round_to_zero(float16 a, float_status *status);
 275
 276 /*----------------------------------------------------------------------------
 277 | Software half-precision operations.
 278 *----------------------------------------------------------------------------*/
 279
 280 float16 float16_round_to_int(float16, float_status *status);
 281 float16 float16_add(float16, float16, float_status *status);
 282 float16 float16_sub(float16, float16, float_status *status);
 283 float16 float16_mul(float16, float16, float_status *status);
 284 float16 float16_muladd(float16, float16, float16, int, float_status *status);
 285 float16 float16_div(float16, float16, float_status *status);
 286 float16 float16_scalbn(float16, int, float_status *status);
 287 float16 float16_min(float16, float16, float_status *status);
 288 float16 float16_max(float16, float16, float_status *status);
 289 float16 float16_minnum(float16, float16, float_status *status);
 290 float16 float16_maxnum(float16, float16, float_status *status);
 291 float16 float16_minnummag(float16, float16, float_status *status);
 292 float16 float16_maxnummag(float16, float16, float_status *status);
 293 float16 float16_sqrt(float16, float_status *status);
 294 int float16_compare(float16, float16, float_status *status);
 295 int float16_compare_quiet(float16, float16, float_status *status);
 296
 297 int float16_is_quiet_nan(float16, float_status *status);
 298 int float16_is_signaling_nan(float16, float_status *status);
 299 float16 float16_silence_nan(float16, float_status *status);
 300
 301 static inline int float16_is_any_nan(float16 a)
 302 {
 303     return ((float16_val(a) & ~0x8000) > 0x7c00);
 304 }
 305
 306 static inline int float16_is_neg(float16 a)
 307 {
 308     return float16_val(a) >> 15;
 309 }
 310
 311 static inline int float16_is_infinity(float16 a)
 312 {
 313     return (float16_val(a) & 0x7fff) == 0x7c00;
 314 }
 315
 316 static inline int float16_is_zero(float16 a)
 317 {
 318     return (float16_val(a) & 0x7fff) == 0;
 319 }
 320
 321 static inline int float16_is_zero_or_denormal(float16 a)
 322 {
 323     return (float16_val(a) & 0x7c00) == 0;
 324 }
 325
 326 static inline float16 float16_abs(float16 a)
 327 {
 328     /* Note that abs does *not* handle NaN specially, nor does
 329      * it flush denormal inputs to zero.
 330      */
 331     return make_float16(float16_val(a) & 0x7fff);
 332 }
 333
 334 static inline float16 float16_chs(float16 a)
 335 {
 336     /* Note that chs does *not* handle NaN specially, nor does
 337      * it flush denormal inputs to zero.
 338      */
 339     return make_float16(float16_val(a) ^ 0x8000);
 340 }
 341
 342 static inline float16 float16_set_sign(float16 a, int sign)
 343 {
 344     return make_float16((float16_val(a) & 0x7fff) | (sign << 15));
 345 }
 346
 347 #define float16_zero make_float16(0)
 348 #define float16_half make_float16(0x3800)
 349 #define float16_one make_float16(0x3c00)
 350 #define float16_one_point_five make_float16(0x3e00)
 351 #define float16_two make_float16(0x4000)
 352 #define float16_three make_float16(0x4200)
 353 #define float16_infinity make_float16(0x7c00)
 354
 355 /*----------------------------------------------------------------------------
 356 | The pattern for a default generated half-precision NaN.
 357 *----------------------------------------------------------------------------*/
 358 float16 float16_default_nan(float_status *status);
 359
 360 /*----------------------------------------------------------------------------
 361 | Software IEC/IEEE single-precision conversion routines.
 362 *----------------------------------------------------------------------------*/
 363
 364 int16_t float32_to_int16_scalbn(float32, int, int, float_status *status);
 365 int32_t float32_to_int32_scalbn(float32, int, int, float_status *status);
 366 int64_t float32_to_int64_scalbn(float32, int, int, float_status *status);
 367
 368 int16_t float32_to_int16(float32, float_status *status);
 369 int32_t float32_to_int32(float32, float_status *status);
 370 int64_t float32_to_int64(float32, float_status *status);
 371
 372 int16_t float32_to_int16_round_to_zero(float32, float_status *status);
 373 int32_t float32_to_int32_round_to_zero(float32, float_status *status);
 374 int64_t float32_to_int64_round_to_zero(float32, float_status *status);
 375
 376 uint16_t float32_to_uint16_scalbn(float32, int, int, float_status *status);
 377 uint32_t float32_to_uint32_scalbn(float32, int, int, float_status *status);
 378 uint64_t float32_to_uint64_scalbn(float32, int, int, float_status *status);
 379
 380 uint16_t float32_to_uint16(float32, float_status *status);
 381 uint32_t float32_to_uint32(float32, float_status *status);
 382 uint64_t float32_to_uint64(float32, float_status *status);
 383
 384 uint16_t float32_to_uint16_round_to_zero(float32, float_status *status);
 385 uint32_t float32_to_uint32_round_to_zero(float32, float_status *status);
 386 uint64_t float32_to_uint64_round_to_zero(float32, float_status *status);
 387
 388 float64 float32_to_float64(float32, float_status *status);
 389 floatx80 float32_to_floatx80(float32, float_status *status);
 390 float128 float32_to_float128(float32, float_status *status);
 391
 392 /*----------------------------------------------------------------------------
 393 | Software IEC/IEEE single-precision operations.
 394 *----------------------------------------------------------------------------*/
 395 float32 float32_round_to_int(float32, float_status *status);
 396 float32 float32_add(float32, float32, float_status *status);
 397 float32 float32_sub(float32, float32, float_status *status);
 398 float32 float32_mul(float32, float32, float_status *status);
 399 float32 float32_div(float32, float32, float_status *status);
 400 float32 float32_rem(float32, float32, float_status *status);
 401 float32 float32_muladd(float32, float32, float32, int, float_status *status);
 402 float32 float32_sqrt(float32, float_status *status);
 403 float32 float32_exp2(float32, float_status *status);
 404 float32 float32_log2(float32, float_status *status);
 405 int float32_eq(float32, float32, float_status *status);
 406 int float32_le(float32, float32, float_status *status);
 407 int float32_lt(float32, float32, float_status *status);
 408 int float32_unordered(float32, float32, float_status *status);
 409 int float32_eq_quiet(float32, float32, float_status *status);
 410 int float32_le_quiet(float32, float32, float_status *status);
 411 int float32_lt_quiet(float32, float32, float_status *status);
 412 int float32_unordered_quiet(float32, float32, float_status *status);
 413 int float32_compare(float32, float32, float_status *status);
 414 int float32_compare_quiet(float32, float32, float_status *status);
 415 float32 float32_min(float32, float32, float_status *status);
 416 float32 float32_max(float32, float32, float_status *status);
 417 float32 float32_minnum(float32, float32, float_status *status);
 418 float32 float32_maxnum(float32, float32, float_status *status);
 419 float32 float32_minnummag(float32, float32, float_status *status);
 420 float32 float32_maxnummag(float32, float32, float_status *status);
 421 int float32_is_quiet_nan(float32, float_status *status);
 422 int float32_is_signaling_nan(float32, float_status *status);
 423 float32 float32_silence_nan(float32, float_status *status);
 424 float32 float32_scalbn(float32, int, float_status *status);
 425
 426 static inline float32 float32_abs(float32 a)
 427 {
 428     /* Note that abs does *not* handle NaN specially, nor does
 429      * it flush denormal inputs to zero.
 430      */
 431     return make_float32(float32_val(a) & 0x7fffffff);
 432 }
 433
 434 static inline float32 float32_chs(float32 a)
 435 {
 436     /* Note that chs does *not* handle NaN specially, nor does
 437      * it flush denormal inputs to zero.
 438      */
 439     return make_float32(float32_val(a) ^ 0x80000000);
 440 }
 441
 442 static inline int float32_is_infinity(float32 a)
 443 {
 444     return (float32_val(a) & 0x7fffffff) == 0x7f800000;
 445 }
 446
 447 static inline int float32_is_neg(float32 a)
 448 {
 449     return float32_val(a) >> 31;
 450 }
 451
 452 static inline int float32_is_zero(float32 a)
 453 {
 454     return (float32_val(a) & 0x7fffffff) == 0;
 455 }
 456
 457 static inline int float32_is_any_nan(float32 a)
 458 {
 459     return ((float32_val(a) & ~(1 << 31)) > 0x7f800000UL);
 460 }
 461
 462 static inline int float32_is_zero_or_denormal(float32 a)
 463 {
 464     return (float32_val(a) & 0x7f800000) == 0;
 465 }
 466
 467 static inline float32 float32_set_sign(float32 a, int sign)
 468 {
 469     return make_float32((float32_val(a) & 0x7fffffff) | (sign << 31));
 470 }
 471
 472 #define float32_zero make_float32(0)
 473 #define float32_half make_float32(0x3f000000)
 474 #define float32_one make_float32(0x3f800000)
 475 #define float32_one_point_five make_float32(0x3fc00000)
 476 #define float32_two make_float32(0x40000000)
 477 #define float32_three make_float32(0x40400000)
 478 #define float32_infinity make_float32(0x7f800000)
 479
 480 /*----------------------------------------------------------------------------
 481 | Packs the sign `zSign', exponent `zExp', and significand `zSig' into a
 482 | single-precision floating-point value, returning the result.  After being
 483 | shifted into the proper positions, the three fields are simply added
 484 | together to form the result.  This means that any integer portion of `zSig'
 485 | will be added into the exponent.  Since a properly normalized significand
 486 | will have an integer portion equal to 1, the `zExp' input should be 1 less
 487 | than the desired result exponent whenever `zSig' is a complete, normalized
 488 | significand.
 489 *----------------------------------------------------------------------------*/
 490
 491 static inline float32 packFloat32(flag zSign, int zExp, uint32_t zSig)
 492 {
 493     return make_float32(
 494           (((uint32_t)zSign) << 31) + (((uint32_t)zExp) << 23) + zSig);
 495 }
 496
 497 /*----------------------------------------------------------------------------
 498 | The pattern for a default generated single-precision NaN.
 499 *----------------------------------------------------------------------------*/
 500 float32 float32_default_nan(float_status *status);
 501
 502 /*----------------------------------------------------------------------------
 503 | Software IEC/IEEE double-precision conversion routines.
 504 *----------------------------------------------------------------------------*/
 505
 506 int16_t float64_to_int16_scalbn(float64, int, int, float_status *status);
 507 int32_t float64_to_int32_scalbn(float64, int, int, float_status *status);
 508 int64_t float64_to_int64_scalbn(float64, int, int, float_status *status);
 509
 510 int16_t float64_to_int16(float64, float_status *status);
 511 int32_t float64_to_int32(float64, float_status *status);
 512 int64_t float64_to_int64(float64, float_status *status);
 513
 514 int16_t float64_to_int16_round_to_zero(float64, float_status *status);
 515 int32_t float64_to_int32_round_to_zero(float64, float_status *status);
 516 int64_t float64_to_int64_round_to_zero(float64, float_status *status);
 517
 518 uint16_t float64_to_uint16_scalbn(float64, int, int, float_status *status);
 519 uint32_t float64_to_uint32_scalbn(float64, int, int, float_status *status);
 520 uint64_t float64_to_uint64_scalbn(float64, int, int, float_status *status);
 521
 522 uint16_t float64_to_uint16(float64, float_status *status);
 523 uint32_t float64_to_uint32(float64, float_status *status);
 524 uint64_t float64_to_uint64(float64, float_status *status);
 525
 526 uint16_t float64_to_uint16_round_to_zero(float64, float_status *status);
 527 uint32_t float64_to_uint32_round_to_zero(float64, float_status *status);
 528 uint64_t float64_to_uint64_round_to_zero(float64, float_status *status);
 529
 530 float32 float64_to_float32(float64, float_status *status);
 531 floatx80 float64_to_floatx80(float64, float_status *status);
 532 float128 float64_to_float128(float64, float_status *status);
 533
 534 /*----------------------------------------------------------------------------
 535 | Software IEC/IEEE double-precision operations.
 536 *----------------------------------------------------------------------------*/
 537 float64 float64_round_to_int(float64, float_status *status);
 538 float64 float64_trunc_to_int(float64, float_status *status);
 539 float64 float64_add(float64, float64, float_status *status);
 540 float64 float64_sub(float64, float64, float_status *status);
 541 float64 float64_mul(float64, float64, float_status *status);
 542 float64 float64_div(float64, float64, float_status *status);
 543 float64 float64_rem(float64, float64, float_status *status);
 544 float64 float64_muladd(float64, float64, float64, int, float_status *status);
 545 float64 float64_sqrt(float64, float_status *status);
 546 float64 float64_log2(float64, float_status *status);
 547 int float64_eq(float64, float64, float_status *status);
 548 int float64_le(float64, float64, float_status *status);
 549 int float64_lt(float64, float64, float_status *status);
 550 int float64_unordered(float64, float64, float_status *status);
 551 int float64_eq_quiet(float64, float64, float_status *status);
 552 int float64_le_quiet(float64, float64, float_status *status);
 553 int float64_lt_quiet(float64, float64, float_status *status);
 554 int float64_unordered_quiet(float64, float64, float_status *status);
 555 int float64_compare(float64, float64, float_status *status);
 556 int float64_compare_quiet(float64, float64, float_status *status);
 557 float64 float64_min(float64, float64, float_status *status);
 558 float64 float64_max(float64, float64, float_status *status);
 559 float64 float64_minnum(float64, float64, float_status *status);
 560 float64 float64_maxnum(float64, float64, float_status *status);
 561 float64 float64_minnummag(float64, float64, float_status *status);
 562 float64 float64_maxnummag(float64, float64, float_status *status);
 563 int float64_is_quiet_nan(float64 a, float_status *status);
 564 int float64_is_signaling_nan(float64, float_status *status);
 565 float64 float64_silence_nan(float64, float_status *status);
 566 float64 float64_scalbn(float64, int, float_status *status);
 567
 568 static inline float64 float64_abs(float64 a)
 569 {
 570     /* Note that abs does *not* handle NaN specially, nor does
 571      * it flush denormal inputs to zero.
 572      */
 573     return make_float64(float64_val(a) & 0x7fffffffffffffffLL);
 574 }
 575
 576 static inline float64 float64_chs(float64 a)
 577 {
 578     /* Note that chs does *not* handle NaN specially, nor does
 579      * it flush denormal inputs to zero.
 580      */
 581     return make_float64(float64_val(a) ^ 0x8000000000000000LL);
 582 }
 583
 584 static inline int float64_is_infinity(float64 a)
 585 {
 586     return (float64_val(a) & 0x7fffffffffffffffLL ) == 0x7ff0000000000000LL;
 587 }
 588
 589 static inline int float64_is_neg(float64 a)
 590 {
 591     return float64_val(a) >> 63;
 592 }
 593
 594 static inline int float64_is_zero(float64 a)
 595 {
 596     return (float64_val(a) & 0x7fffffffffffffffLL) == 0;
 597 }
 598
 599 static inline int float64_is_any_nan(float64 a)
 600 {
 601     return ((float64_val(a) & ~(1ULL << 63)) > 0x7ff0000000000000ULL);
 602 }
 603
 604 static inline int float64_is_zero_or_denormal(float64 a)
 605 {
 606     return (float64_val(a) & 0x7ff0000000000000LL) == 0;
 607 }
 608
 609 static inline float64 float64_set_sign(float64 a, int sign)
 610 {
 611     return make_float64((float64_val(a) & 0x7fffffffffffffffULL)
 612                         | ((int64_t)sign << 63));
 613 }
 614
 615 #define float64_zero make_float64(0)
 616 #define float64_half make_float64(0x3fe0000000000000LL)
 617 #define float64_one make_float64(0x3ff0000000000000LL)
 618 #define float64_one_point_five make_float64(0x3FF8000000000000ULL)
 619 #define float64_two make_float64(0x4000000000000000ULL)
 620 #define float64_three make_float64(0x4008000000000000ULL)
 621 #define float64_ln2 make_float64(0x3fe62e42fefa39efLL)
 622 #define float64_infinity make_float64(0x7ff0000000000000LL)
 623
 624 /*----------------------------------------------------------------------------
 625 | The pattern for a default generated double-precision NaN.
 626 *----------------------------------------------------------------------------*/
 627 float64 float64_default_nan(float_status *status);
 628
 629 /*----------------------------------------------------------------------------
 630 | Software IEC/IEEE extended double-precision conversion routines.
 631 *----------------------------------------------------------------------------*/
 632 int32_t floatx80_to_int32(floatx80, float_status *status);
 633 int32_t floatx80_to_int32_round_to_zero(floatx80, float_status *status);
 634 int64_t floatx80_to_int64(floatx80, float_status *status);
 635 int64_t floatx80_to_int64_round_to_zero(floatx80, float_status *status);
 636 float32 floatx80_to_float32(floatx80, float_status *status);
 637 float64 floatx80_to_float64(floatx80, float_status *status);
 638 float128 floatx80_to_float128(floatx80, float_status *status);
 639
 640 /*----------------------------------------------------------------------------
 641 | The pattern for an extended double-precision inf.
 642 *----------------------------------------------------------------------------*/
 643 extern const floatx80 floatx80_infinity;
 644
 645 /*----------------------------------------------------------------------------
 646 | Software IEC/IEEE extended double-precision operations.
 647 *----------------------------------------------------------------------------*/
 648 floatx80 floatx80_round(floatx80 a, float_status *status);
 649 floatx80 floatx80_round_to_int(floatx80, float_status *status);
 650 floatx80 floatx80_add(floatx80, floatx80, float_status *status);
 651 floatx80 floatx80_sub(floatx80, floatx80, float_status *status);
 652 floatx80 floatx80_mul(floatx80, floatx80, float_status *status);
 653 floatx80 floatx80_div(floatx80, floatx80, float_status *status);
 654 floatx80 floatx80_rem(floatx80, floatx80, float_status *status);
 655 floatx80 floatx80_sqrt(floatx80, float_status *status);
 656 int floatx80_eq(floatx80, floatx80, float_status *status);
 657 int floatx80_le(floatx80, floatx80, float_status *status);
 658 int floatx80_lt(floatx80, floatx80, float_status *status);
 659 int floatx80_unordered(floatx80, floatx80, float_status *status);
 660 int floatx80_eq_quiet(floatx80, floatx80, float_status *status);
 661 int floatx80_le_quiet(floatx80, floatx80, float_status *status);
 662 int floatx80_lt_quiet(floatx80, floatx80, float_status *status);
 663 int floatx80_unordered_quiet(floatx80, floatx80, float_status *status);
 664 int floatx80_compare(floatx80, floatx80, float_status *status);
 665 int floatx80_compare_quiet(floatx80, floatx80, float_status *status);
 666 int floatx80_is_quiet_nan(floatx80, float_status *status);
 667 int floatx80_is_signaling_nan(floatx80, float_status *status);
 668 floatx80 floatx80_silence_nan(floatx80, float_status *status);
 669 floatx80 floatx80_scalbn(floatx80, int, float_status *status);
 670
 671 static inline floatx80 floatx80_abs(floatx80 a)
 672 {
 673     a.high &= 0x7fff;
 674     return a;
 675 }
 676
 677 static inline floatx80 floatx80_chs(floatx80 a)
 678 {
 679     a.high ^= 0x8000;
 680     return a;
 681 }
 682
 683 static inline int floatx80_is_infinity(floatx80 a)
 684 {
 685 #if defined(TARGET_M68K)
 686     return (a.high & 0x7fff) == floatx80_infinity.high && !(a.low << 1);
 687 #else
 688     return (a.high & 0x7fff) == floatx80_infinity.high &&
 689                        a.low == floatx80_infinity.low;
 690 #endif
 691 }
 692
 693 static inline int floatx80_is_neg(floatx80 a)
 694 {
 695     return a.high >> 15;
 696 }
 697
 698 static inline int floatx80_is_zero(floatx80 a)
 699 {
 700     return (a.high & 0x7fff) == 0 && a.low == 0;
 701 }
 702
 703 static inline int floatx80_is_zero_or_denormal(floatx80 a)
 704 {
 705     return (a.high & 0x7fff) == 0;
 706 }
 707
 708 static inline int floatx80_is_any_nan(floatx80 a)
 709 {
 710     return ((a.high & 0x7fff) == 0x7fff) && (a.low<<1);
 711 }
 712
 713 /*----------------------------------------------------------------------------
 714 | Return whether the given value is an invalid floatx80 encoding.
 715 | Invalid floatx80 encodings arise when the integer bit is not set, but
 716 | the exponent is not zero. The only times the integer bit is permitted to
 717 | be zero is in subnormal numbers and the value zero.
 718 | This includes what the Intel software developer's manual calls pseudo-NaNs,
 719 | pseudo-infinities and un-normal numbers. It does not include
 720 | pseudo-denormals, which must still be correctly handled as inputs even
 721 | if they are never generated as outputs.
 722 *----------------------------------------------------------------------------*/
 723 static inline bool floatx80_invalid_encoding(floatx80 a)
 724 {
 725     return (a.low & (1ULL << 63)) == 0 && (a.high & 0x7FFF) != 0;
 726 }
 727
 728 #define floatx80_zero make_floatx80(0x0000, 0x0000000000000000LL)
 729 #define floatx80_one make_floatx80(0x3fff, 0x8000000000000000LL)
 730 #define floatx80_ln2 make_floatx80(0x3ffe, 0xb17217f7d1cf79acLL)
 731 #define floatx80_pi make_floatx80(0x4000, 0xc90fdaa22168c235LL)
 732 #define floatx80_half make_floatx80(0x3ffe, 0x8000000000000000LL)
 733
 734 /*----------------------------------------------------------------------------
 735 | Returns the fraction bits of the extended double-precision floating-point
 736 | value `a'.
 737 *----------------------------------------------------------------------------*/
 738
 739 static inline uint64_t extractFloatx80Frac(floatx80 a)
 740 {
 741     return a.low;
 742 }
 743
 744 /*----------------------------------------------------------------------------
 745 | Returns the exponent bits of the extended double-precision floating-point
 746 | value `a'.
 747 *----------------------------------------------------------------------------*/
 748
 749 static inline int32_t extractFloatx80Exp(floatx80 a)
 750 {
 751     return a.high & 0x7FFF;
 752 }
 753
 754 /*----------------------------------------------------------------------------
 755 | Returns the sign bit of the extended double-precision floating-point value
 756 | `a'.
 757 *----------------------------------------------------------------------------*/
 758
 759 static inline flag extractFloatx80Sign(floatx80 a)
 760 {
 761     return a.high >> 15;
 762 }
 763
 764 /*----------------------------------------------------------------------------
 765 | Packs the sign `zSign', exponent `zExp', and significand `zSig' into an
 766 | extended double-precision floating-point value, returning the result.
 767 *----------------------------------------------------------------------------*/
 768
 769 static inline floatx80 packFloatx80(flag zSign, int32_t zExp, uint64_t zSig)
 770 {
 771     floatx80 z;
 772
 773     z.low = zSig;
 774     z.high = (((uint16_t)zSign) << 15) + zExp;
 775     return z;
 776 }
 777
 778 /*----------------------------------------------------------------------------
 779 | Normalizes the subnormal extended double-precision floating-point value
 780 | represented by the denormalized significand `aSig'.  The normalized exponent
 781 | and significand are stored at the locations pointed to by `zExpPtr' and
 782 | `zSigPtr', respectively.
 783 *----------------------------------------------------------------------------*/
 784
 785 void normalizeFloatx80Subnormal(uint64_t aSig, int32_t *zExpPtr,
 786                                 uint64_t *zSigPtr);
 787
 788 /*----------------------------------------------------------------------------
 789 | Takes two extended double-precision floating-point values `a' and `b', one
 790 | of which is a NaN, and returns the appropriate NaN result.  If either `a' or
 791 | `b' is a signaling NaN, the invalid exception is raised.
 792 *----------------------------------------------------------------------------*/
 793
 794 floatx80 propagateFloatx80NaN(floatx80 a, floatx80 b, float_status *status);
 795
 796 /*----------------------------------------------------------------------------
 797 | Takes an abstract floating-point value having sign `zSign', exponent `zExp',
 798 | and extended significand formed by the concatenation of `zSig0' and `zSig1',
 799 | and returns the proper extended double-precision floating-point value
 800 | corresponding to the abstract input.  Ordinarily, the abstract value is
 801 | rounded and packed into the extended double-precision format, with the
 802 | inexact exception raised if the abstract input cannot be represented
 803 | exactly.  However, if the abstract value is too large, the overflow and
 804 | inexact exceptions are raised and an infinity or maximal finite value is
 805 | returned.  If the abstract value is too small, the input value is rounded to
 806 | a subnormal number, and the underflow and inexact exceptions are raised if
 807 | the abstract input cannot be represented exactly as a subnormal extended
 808 | double-precision floating-point number.
 809 |     If `roundingPrecision' is 32 or 64, the result is rounded to the same
 810 | number of bits as single or double precision, respectively.  Otherwise, the
 811 | result is rounded to the full precision of the extended double-precision
 812 | format.
 813 |     The input significand must be normalized or smaller.  If the input
 814 | significand is not normalized, `zExp' must be 0; in that case, the result
 815 | returned is a subnormal number, and it must not require rounding.  The
 816 | handling of underflow and overflow follows the IEC/IEEE Standard for Binary
 817 | Floating-Point Arithmetic.
 818 *----------------------------------------------------------------------------*/
 819
 820 floatx80 roundAndPackFloatx80(int8_t roundingPrecision, flag zSign,
 821                               int32_t zExp, uint64_t zSig0, uint64_t zSig1,
 822                               float_status *status);
 823
 824 /*----------------------------------------------------------------------------
 825 | Takes an abstract floating-point value having sign `zSign', exponent
 826 | `zExp', and significand formed by the concatenation of `zSig0' and `zSig1',
 827 | and returns the proper extended double-precision floating-point value
 828 | corresponding to the abstract input.  This routine is just like
 829 | `roundAndPackFloatx80' except that the input significand does not have to be
 830 | normalized.
 831 *----------------------------------------------------------------------------*/
 832
 833 floatx80 normalizeRoundAndPackFloatx80(int8_t roundingPrecision,
 834                                        flag zSign, int32_t zExp,
 835                                        uint64_t zSig0, uint64_t zSig1,
 836                                        float_status *status);
 837
 838 /*----------------------------------------------------------------------------
 839 | The pattern for a default generated extended double-precision NaN.
 840 *----------------------------------------------------------------------------*/
 841 floatx80 floatx80_default_nan(float_status *status);
 842
 843 /*----------------------------------------------------------------------------
 844 | Software IEC/IEEE quadruple-precision conversion routines.
 845 *----------------------------------------------------------------------------*/
 846 int32_t float128_to_int32(float128, float_status *status);
 847 int32_t float128_to_int32_round_to_zero(float128, float_status *status);
 848 int64_t float128_to_int64(float128, float_status *status);
 849 int64_t float128_to_int64_round_to_zero(float128, float_status *status);
 850 uint64_t float128_to_uint64(float128, float_status *status);
 851 uint64_t float128_to_uint64_round_to_zero(float128, float_status *status);
 852 uint32_t float128_to_uint32_round_to_zero(float128, float_status *status);
 853 float32 float128_to_float32(float128, float_status *status);
 854 float64 float128_to_float64(float128, float_status *status);
 855 floatx80 float128_to_floatx80(float128, float_status *status);
 856
 857 /*----------------------------------------------------------------------------
 858 | Software IEC/IEEE quadruple-precision operations.
 859 *----------------------------------------------------------------------------*/
 860 float128 float128_round_to_int(float128, float_status *status);
 861 float128 float128_add(float128, float128, float_status *status);
 862 float128 float128_sub(float128, float128, float_status *status);
 863 float128 float128_mul(float128, float128, float_status *status);
 864 float128 float128_div(float128, float128, float_status *status);
 865 float128 float128_rem(float128, float128, float_status *status);
 866 float128 float128_sqrt(float128, float_status *status);
 867 int float128_eq(float128, float128, float_status *status);
 868 int float128_le(float128, float128, float_status *status);
 869 int float128_lt(float128, float128, float_status *status);
 870 int float128_unordered(float128, float128, float_status *status);
 871 int float128_eq_quiet(float128, float128, float_status *status);
 872 int float128_le_quiet(float128, float128, float_status *status);
 873 int float128_lt_quiet(float128, float128, float_status *status);
 874 int float128_unordered_quiet(float128, float128, float_status *status);
 875 int float128_compare(float128, float128, float_status *status);
 876 int float128_compare_quiet(float128, float128, float_status *status);
 877 int float128_is_quiet_nan(float128, float_status *status);
 878 int float128_is_signaling_nan(float128, float_status *status);
 879 float128 float128_silence_nan(float128, float_status *status);
 880 float128 float128_scalbn(float128, int, float_status *status);
 881
 882 static inline float128 float128_abs(float128 a)
 883 {
 884     a.high &= 0x7fffffffffffffffLL;
 885     return a;
 886 }
 887
 888 static inline float128 float128_chs(float128 a)
 889 {
 890     a.high ^= 0x8000000000000000LL;
 891     return a;
 892 }
 893
 894 static inline int float128_is_infinity(float128 a)
 895 {
 896     return (a.high & 0x7fffffffffffffffLL) == 0x7fff000000000000LL && a.low == 0;
 897 }
 898
 899 static inline int float128_is_neg(float128 a)
 900 {
 901     return a.high >> 63;
 902 }
 903
 904 static inline int float128_is_zero(float128 a)
 905 {
 906     return (a.high & 0x7fffffffffffffffLL) == 0 && a.low == 0;
 907 }
 908
 909 static inline int float128_is_zero_or_denormal(float128 a)
 910 {
 911     return (a.high & 0x7fff000000000000LL) == 0;
 912 }
 913
 914 static inline int float128_is_any_nan(float128 a)
 915 {
 916     return ((a.high >> 48) & 0x7fff) == 0x7fff &&
 917         ((a.low != 0) || ((a.high & 0xffffffffffffLL) != 0));
 918 }
 919
 920 #define float128_zero make_float128(0, 0)
 921
 922 /*----------------------------------------------------------------------------
 923 | The pattern for a default generated quadruple-precision NaN.
 924 *----------------------------------------------------------------------------*/
 925 float128 float128_default_nan(float_status *status);
 926
 927 #endif /* SOFTFLOAT_H */