1 #if !defined (__MIPS_CPU_H__)
7 #define TARGET_HAS_ICE 1
9 #define ELF_MACHINE EM_MIPS
11 #define CPUArchState struct CPUMIPSState
14 #include "qemu-common.h"
15 #include "mips-defs.h"
16 #include "exec/cpu-defs.h"
17 #include "fpu/softfloat.h"
21 typedef struct r4k_tlb_t r4k_tlb_t
;
36 #if !defined(CONFIG_USER_ONLY)
37 typedef struct CPUMIPSTLBContext CPUMIPSTLBContext
;
38 struct CPUMIPSTLBContext
{
41 int (*map_address
) (struct CPUMIPSState
*env
, hwaddr
*physical
, int *prot
, target_ulong address
, int rw
, int access_type
);
42 void (*helper_tlbwi
)(struct CPUMIPSState
*env
);
43 void (*helper_tlbwr
)(struct CPUMIPSState
*env
);
44 void (*helper_tlbp
)(struct CPUMIPSState
*env
);
45 void (*helper_tlbr
)(struct CPUMIPSState
*env
);
48 r4k_tlb_t tlb
[MIPS_TLB_MAX
];
54 typedef union fpr_t fpr_t
;
56 float64 fd
; /* ieee double precision */
57 float32 fs
[2];/* ieee single precision */
58 uint64_t d
; /* binary double fixed-point */
59 uint32_t w
[2]; /* binary single fixed-point */
61 /* define FP_ENDIAN_IDX to access the same location
62 * in the fpr_t union regardless of the host endianness
64 #if defined(HOST_WORDS_BIGENDIAN)
65 # define FP_ENDIAN_IDX 1
67 # define FP_ENDIAN_IDX 0
70 typedef struct CPUMIPSFPUContext CPUMIPSFPUContext
;
71 struct CPUMIPSFPUContext
{
72 /* Floating point registers */
74 float_status fp_status
;
75 /* fpu implementation/revision register (fir) */
89 #define SET_FP_COND(num,env) do { ((env).fcr31) |= ((num) ? (1 << ((num) + 24)) : (1 << 23)); } while(0)
90 #define CLEAR_FP_COND(num,env) do { ((env).fcr31) &= ~((num) ? (1 << ((num) + 24)) : (1 << 23)); } while(0)
91 #define GET_FP_COND(env) ((((env).fcr31 >> 24) & 0xfe) | (((env).fcr31 >> 23) & 0x1))
92 #define GET_FP_CAUSE(reg) (((reg) >> 12) & 0x3f)
93 #define GET_FP_ENABLE(reg) (((reg) >> 7) & 0x1f)
94 #define GET_FP_FLAGS(reg) (((reg) >> 2) & 0x1f)
95 #define SET_FP_CAUSE(reg,v) do { (reg) = ((reg) & ~(0x3f << 12)) | ((v & 0x3f) << 12); } while(0)
96 #define SET_FP_ENABLE(reg,v) do { (reg) = ((reg) & ~(0x1f << 7)) | ((v & 0x1f) << 7); } while(0)
97 #define SET_FP_FLAGS(reg,v) do { (reg) = ((reg) & ~(0x1f << 2)) | ((v & 0x1f) << 2); } while(0)
98 #define UPDATE_FP_FLAGS(reg,v) do { (reg) |= ((v & 0x1f) << 2); } while(0)
100 #define FP_UNDERFLOW 2
101 #define FP_OVERFLOW 4
103 #define FP_INVALID 16
104 #define FP_UNIMPLEMENTED 32
107 #define NB_MMU_MODES 3
109 typedef struct CPUMIPSMVPContext CPUMIPSMVPContext
;
110 struct CPUMIPSMVPContext
{
111 int32_t CP0_MVPControl
;
112 #define CP0MVPCo_CPA 3
113 #define CP0MVPCo_STLB 2
114 #define CP0MVPCo_VPC 1
115 #define CP0MVPCo_EVP 0
116 int32_t CP0_MVPConf0
;
117 #define CP0MVPC0_M 31
118 #define CP0MVPC0_TLBS 29
119 #define CP0MVPC0_GS 28
120 #define CP0MVPC0_PCP 27
121 #define CP0MVPC0_PTLBE 16
122 #define CP0MVPC0_TCA 15
123 #define CP0MVPC0_PVPE 10
124 #define CP0MVPC0_PTC 0
125 int32_t CP0_MVPConf1
;
126 #define CP0MVPC1_CIM 31
127 #define CP0MVPC1_CIF 30
128 #define CP0MVPC1_PCX 20
129 #define CP0MVPC1_PCP2 10
130 #define CP0MVPC1_PCP1 0
133 typedef struct mips_def_t mips_def_t
;
135 #define MIPS_SHADOW_SET_MAX 16
136 #define MIPS_TC_MAX 5
137 #define MIPS_FPU_MAX 1
138 #define MIPS_DSP_ACC 4
140 typedef struct TCState TCState
;
142 target_ulong gpr
[32];
144 target_ulong HI
[MIPS_DSP_ACC
];
145 target_ulong LO
[MIPS_DSP_ACC
];
146 target_ulong ACX
[MIPS_DSP_ACC
];
147 target_ulong DSPControl
;
148 int32_t CP0_TCStatus
;
149 #define CP0TCSt_TCU3 31
150 #define CP0TCSt_TCU2 30
151 #define CP0TCSt_TCU1 29
152 #define CP0TCSt_TCU0 28
153 #define CP0TCSt_TMX 27
154 #define CP0TCSt_RNST 23
155 #define CP0TCSt_TDS 21
156 #define CP0TCSt_DT 20
157 #define CP0TCSt_DA 15
159 #define CP0TCSt_TKSU 11
160 #define CP0TCSt_IXMT 10
161 #define CP0TCSt_TASID 0
163 #define CP0TCBd_CurTC 21
164 #define CP0TCBd_TBE 17
165 #define CP0TCBd_CurVPE 0
166 target_ulong CP0_TCHalt
;
167 target_ulong CP0_TCContext
;
168 target_ulong CP0_TCSchedule
;
169 target_ulong CP0_TCScheFBack
;
170 int32_t CP0_Debug_tcstatus
;
171 target_ulong CP0_UserLocal
;
174 typedef struct CPUMIPSState CPUMIPSState
;
175 struct CPUMIPSState
{
177 CPUMIPSFPUContext active_fpu
;
180 uint32_t current_fpu
;
184 target_ulong SEGMask
;
188 /* CP0_MVP* are per MVP registers. */
190 int32_t CP0_VPEControl
;
191 #define CP0VPECo_YSI 21
192 #define CP0VPECo_GSI 20
193 #define CP0VPECo_EXCPT 16
194 #define CP0VPECo_TE 15
195 #define CP0VPECo_TargTC 0
196 int32_t CP0_VPEConf0
;
197 #define CP0VPEC0_M 31
198 #define CP0VPEC0_XTC 21
199 #define CP0VPEC0_TCS 19
200 #define CP0VPEC0_SCS 18
201 #define CP0VPEC0_DSC 17
202 #define CP0VPEC0_ICS 16
203 #define CP0VPEC0_MVP 1
204 #define CP0VPEC0_VPA 0
205 int32_t CP0_VPEConf1
;
206 #define CP0VPEC1_NCX 20
207 #define CP0VPEC1_NCP2 10
208 #define CP0VPEC1_NCP1 0
209 target_ulong CP0_YQMask
;
210 target_ulong CP0_VPESchedule
;
211 target_ulong CP0_VPEScheFBack
;
213 #define CP0VPEOpt_IWX7 15
214 #define CP0VPEOpt_IWX6 14
215 #define CP0VPEOpt_IWX5 13
216 #define CP0VPEOpt_IWX4 12
217 #define CP0VPEOpt_IWX3 11
218 #define CP0VPEOpt_IWX2 10
219 #define CP0VPEOpt_IWX1 9
220 #define CP0VPEOpt_IWX0 8
221 #define CP0VPEOpt_DWX7 7
222 #define CP0VPEOpt_DWX6 6
223 #define CP0VPEOpt_DWX5 5
224 #define CP0VPEOpt_DWX4 4
225 #define CP0VPEOpt_DWX3 3
226 #define CP0VPEOpt_DWX2 2
227 #define CP0VPEOpt_DWX1 1
228 #define CP0VPEOpt_DWX0 0
229 target_ulong CP0_EntryLo0
;
230 target_ulong CP0_EntryLo1
;
231 target_ulong CP0_Context
;
232 int32_t CP0_PageMask
;
233 int32_t CP0_PageGrain
;
235 int32_t CP0_SRSConf0_rw_bitmask
;
236 int32_t CP0_SRSConf0
;
237 #define CP0SRSC0_M 31
238 #define CP0SRSC0_SRS3 20
239 #define CP0SRSC0_SRS2 10
240 #define CP0SRSC0_SRS1 0
241 int32_t CP0_SRSConf1_rw_bitmask
;
242 int32_t CP0_SRSConf1
;
243 #define CP0SRSC1_M 31
244 #define CP0SRSC1_SRS6 20
245 #define CP0SRSC1_SRS5 10
246 #define CP0SRSC1_SRS4 0
247 int32_t CP0_SRSConf2_rw_bitmask
;
248 int32_t CP0_SRSConf2
;
249 #define CP0SRSC2_M 31
250 #define CP0SRSC2_SRS9 20
251 #define CP0SRSC2_SRS8 10
252 #define CP0SRSC2_SRS7 0
253 int32_t CP0_SRSConf3_rw_bitmask
;
254 int32_t CP0_SRSConf3
;
255 #define CP0SRSC3_M 31
256 #define CP0SRSC3_SRS12 20
257 #define CP0SRSC3_SRS11 10
258 #define CP0SRSC3_SRS10 0
259 int32_t CP0_SRSConf4_rw_bitmask
;
260 int32_t CP0_SRSConf4
;
261 #define CP0SRSC4_SRS15 20
262 #define CP0SRSC4_SRS14 10
263 #define CP0SRSC4_SRS13 0
265 target_ulong CP0_BadVAddr
;
267 target_ulong CP0_EntryHi
;
292 #define CP0IntCtl_IPTI 29
293 #define CP0IntCtl_IPPC1 26
294 #define CP0IntCtl_VS 5
296 #define CP0SRSCtl_HSS 26
297 #define CP0SRSCtl_EICSS 18
298 #define CP0SRSCtl_ESS 12
299 #define CP0SRSCtl_PSS 6
300 #define CP0SRSCtl_CSS 0
302 #define CP0SRSMap_SSV7 28
303 #define CP0SRSMap_SSV6 24
304 #define CP0SRSMap_SSV5 20
305 #define CP0SRSMap_SSV4 16
306 #define CP0SRSMap_SSV3 12
307 #define CP0SRSMap_SSV2 8
308 #define CP0SRSMap_SSV1 4
309 #define CP0SRSMap_SSV0 0
319 #define CP0Ca_IP_mask 0x0000FF00
321 target_ulong CP0_EPC
;
365 #define CP0C3_ISA_ON_EXC 16
366 #define CP0C3_ULRI 13
367 #define CP0C3_DSPP 10
375 uint32_t CP0_Config4
;
376 uint32_t CP0_Config4_rw_bitmask
;
378 uint32_t CP0_Config5
;
379 uint32_t CP0_Config5_rw_bitmask
;
384 #define CP0C5_MSAEn 27
386 #define CP0C5_NFExists 0
389 /* XXX: Maybe make LLAddr per-TC? */
392 target_ulong llnewval
;
394 target_ulong CP0_LLAddr_rw_bitmask
;
395 int CP0_LLAddr_shift
;
396 target_ulong CP0_WatchLo
[8];
397 int32_t CP0_WatchHi
[8];
398 target_ulong CP0_XContext
;
399 int32_t CP0_Framemask
;
403 #define CP0DB_LSNM 28
404 #define CP0DB_Doze 27
405 #define CP0DB_Halt 26
407 #define CP0DB_IBEP 24
408 #define CP0DB_DBEP 21
409 #define CP0DB_IEXI 20
419 target_ulong CP0_DEPC
;
420 int32_t CP0_Performance0
;
425 target_ulong CP0_ErrorEPC
;
427 /* We waste some space so we can handle shadow registers like TCs. */
428 TCState tcs
[MIPS_SHADOW_SET_MAX
];
429 CPUMIPSFPUContext fpus
[MIPS_FPU_MAX
];
432 uint32_t hflags
; /* CPU State */
433 /* TMASK defines different execution modes */
434 #define MIPS_HFLAG_TMASK 0x1807FF
435 #define MIPS_HFLAG_MODE 0x00007 /* execution modes */
436 /* The KSU flags must be the lowest bits in hflags. The flag order
437 must be the same as defined for CP0 Status. This allows to use
438 the bits as the value of mmu_idx. */
439 #define MIPS_HFLAG_KSU 0x00003 /* kernel/supervisor/user mode mask */
440 #define MIPS_HFLAG_UM 0x00002 /* user mode flag */
441 #define MIPS_HFLAG_SM 0x00001 /* supervisor mode flag */
442 #define MIPS_HFLAG_KM 0x00000 /* kernel mode flag */
443 #define MIPS_HFLAG_DM 0x00004 /* Debug mode */
444 #define MIPS_HFLAG_64 0x00008 /* 64-bit instructions enabled */
445 #define MIPS_HFLAG_CP0 0x00010 /* CP0 enabled */
446 #define MIPS_HFLAG_FPU 0x00020 /* FPU enabled */
447 #define MIPS_HFLAG_F64 0x00040 /* 64-bit FPU enabled */
448 /* True if the MIPS IV COP1X instructions can be used. This also
449 controls the non-COP1X instructions RECIP.S, RECIP.D, RSQRT.S
451 #define MIPS_HFLAG_COP1X 0x00080 /* COP1X instructions enabled */
452 #define MIPS_HFLAG_RE 0x00100 /* Reversed endianness */
453 #define MIPS_HFLAG_AWRAP 0x00200 /* 32-bit compatibility address wrapping */
454 #define MIPS_HFLAG_M16 0x00400 /* MIPS16 mode flag */
455 #define MIPS_HFLAG_M16_SHIFT 10
456 /* If translation is interrupted between the branch instruction and
457 * the delay slot, record what type of branch it is so that we can
458 * resume translation properly. It might be possible to reduce
459 * this from three bits to two. */
460 #define MIPS_HFLAG_BMASK_BASE 0x03800
461 #define MIPS_HFLAG_B 0x00800 /* Unconditional branch */
462 #define MIPS_HFLAG_BC 0x01000 /* Conditional branch */
463 #define MIPS_HFLAG_BL 0x01800 /* Likely branch */
464 #define MIPS_HFLAG_BR 0x02000 /* branch to register (can't link TB) */
465 /* Extra flags about the current pending branch. */
466 #define MIPS_HFLAG_BMASK_EXT 0x7C000
467 #define MIPS_HFLAG_B16 0x04000 /* branch instruction was 16 bits */
468 #define MIPS_HFLAG_BDS16 0x08000 /* branch requires 16-bit delay slot */
469 #define MIPS_HFLAG_BDS32 0x10000 /* branch requires 32-bit delay slot */
470 #define MIPS_HFLAG_BDS_STRICT 0x20000 /* Strict delay slot size */
471 #define MIPS_HFLAG_BX 0x40000 /* branch exchanges execution mode */
472 #define MIPS_HFLAG_BMASK (MIPS_HFLAG_BMASK_BASE | MIPS_HFLAG_BMASK_EXT)
473 /* MIPS DSP resources access. */
474 #define MIPS_HFLAG_DSP 0x080000 /* Enable access to MIPS DSP resources. */
475 #define MIPS_HFLAG_DSPR2 0x100000 /* Enable access to MIPS DSPR2 resources. */
476 /* Extra flag about HWREna register. */
477 #define MIPS_HFLAG_HWRENA_ULR 0x200000 /* ULR bit from HWREna is set. */
478 target_ulong btarget
; /* Jump / branch target */
479 target_ulong bcond
; /* Branch condition (if needed) */
481 int SYNCI_Step
; /* Address step size for SYNCI */
482 int CCRes
; /* Cycle count resolution/divisor */
483 uint32_t CP0_Status_rw_bitmask
; /* Read/write bits in CP0_Status */
484 uint32_t CP0_TCStatus_rw_bitmask
; /* Read/write bits in CP0_TCStatus */
485 int insn_flags
; /* Supported instruction set */
489 /* Fields from here on are preserved across CPU reset. */
490 CPUMIPSMVPContext
*mvp
;
491 #if !defined(CONFIG_USER_ONLY)
492 CPUMIPSTLBContext
*tlb
;
495 const mips_def_t
*cpu_model
;
497 QEMUTimer
*timer
; /* Internal timer */
502 #if !defined(CONFIG_USER_ONLY)
503 int no_mmu_map_address (CPUMIPSState
*env
, hwaddr
*physical
, int *prot
,
504 target_ulong address
, int rw
, int access_type
);
505 int fixed_mmu_map_address (CPUMIPSState
*env
, hwaddr
*physical
, int *prot
,
506 target_ulong address
, int rw
, int access_type
);
507 int r4k_map_address (CPUMIPSState
*env
, hwaddr
*physical
, int *prot
,
508 target_ulong address
, int rw
, int access_type
);
509 void r4k_helper_tlbwi(CPUMIPSState
*env
);
510 void r4k_helper_tlbwr(CPUMIPSState
*env
);
511 void r4k_helper_tlbp(CPUMIPSState
*env
);
512 void r4k_helper_tlbr(CPUMIPSState
*env
);
514 void mips_cpu_unassigned_access(CPUState
*cpu
, hwaddr addr
,
515 bool is_write
, bool is_exec
, int unused
,
519 void mips_cpu_list (FILE *f
, fprintf_function cpu_fprintf
);
521 #define cpu_exec cpu_mips_exec
522 #define cpu_gen_code cpu_mips_gen_code
523 #define cpu_signal_handler cpu_mips_signal_handler
524 #define cpu_list mips_cpu_list
526 extern void cpu_wrdsp(uint32_t rs
, uint32_t mask_num
, CPUMIPSState
*env
);
527 extern uint32_t cpu_rddsp(uint32_t mask_num
, CPUMIPSState
*env
);
529 #define CPU_SAVE_VERSION 4
531 /* MMU modes definitions. We carefully match the indices with our
533 #define MMU_MODE0_SUFFIX _kernel
534 #define MMU_MODE1_SUFFIX _super
535 #define MMU_MODE2_SUFFIX _user
536 #define MMU_USER_IDX 2
537 static inline int cpu_mmu_index (CPUMIPSState
*env
)
539 return env
->hflags
& MIPS_HFLAG_KSU
;
542 static inline int cpu_mips_hw_interrupts_pending(CPUMIPSState
*env
)
548 if (!(env
->CP0_Status
& (1 << CP0St_IE
)) ||
549 (env
->CP0_Status
& (1 << CP0St_EXL
)) ||
550 (env
->CP0_Status
& (1 << CP0St_ERL
)) ||
551 /* Note that the TCStatus IXMT field is initialized to zero,
552 and only MT capable cores can set it to one. So we don't
553 need to check for MT capabilities here. */
554 (env
->active_tc
.CP0_TCStatus
& (1 << CP0TCSt_IXMT
)) ||
555 (env
->hflags
& MIPS_HFLAG_DM
)) {
556 /* Interrupts are disabled */
560 pending
= env
->CP0_Cause
& CP0Ca_IP_mask
;
561 status
= env
->CP0_Status
& CP0Ca_IP_mask
;
563 if (env
->CP0_Config3
& (1 << CP0C3_VEIC
)) {
564 /* A MIPS configured with a vectorizing external interrupt controller
565 will feed a vector into the Cause pending lines. The core treats
566 the status lines as a vector level, not as indiviual masks. */
567 r
= pending
> status
;
569 /* A MIPS configured with compatibility or VInt (Vectored Interrupts)
570 treats the pending lines as individual interrupt lines, the status
571 lines are individual masks. */
572 r
= pending
& status
;
577 #include "exec/cpu-all.h"
579 /* Memory access type :
580 * may be needed for precise access rights control and precise exceptions.
583 /* 1 bit to define user level / supervisor access */
586 /* 1 bit to indicate direction */
588 /* Type of instruction that generated the access */
589 ACCESS_CODE
= 0x10, /* Code fetch access */
590 ACCESS_INT
= 0x20, /* Integer load/store access */
591 ACCESS_FLOAT
= 0x30, /* floating point load/store access */
605 EXCP_EXT_INTERRUPT
, /* 8 */
621 EXCP_DWATCH
, /* 24 */
632 EXCP_LAST
= EXCP_DSPDIS
,
634 /* Dummy exception for conditional stores. */
635 #define EXCP_SC 0x100
638 * This is an interrnally generated WAKE request line.
639 * It is driven by the CPU itself. Raised when the MT
640 * block wants to wake a VPE from an inactive state and
641 * cleared when VPE goes from active to inactive.
643 #define CPU_INTERRUPT_WAKE CPU_INTERRUPT_TGT_INT_0
645 int cpu_mips_exec(CPUMIPSState
*s
);
646 void mips_tcg_init(void);
647 MIPSCPU
*cpu_mips_init(const char *cpu_model
);
648 int cpu_mips_signal_handler(int host_signum
, void *pinfo
, void *puc
);
650 static inline CPUMIPSState
*cpu_init(const char *cpu_model
)
652 MIPSCPU
*cpu
= cpu_mips_init(cpu_model
);
659 /* TODO QOM'ify CPU reset and remove */
660 void cpu_state_reset(CPUMIPSState
*s
);
663 uint32_t cpu_mips_get_random (CPUMIPSState
*env
);
664 uint32_t cpu_mips_get_count (CPUMIPSState
*env
);
665 void cpu_mips_store_count (CPUMIPSState
*env
, uint32_t value
);
666 void cpu_mips_store_compare (CPUMIPSState
*env
, uint32_t value
);
667 void cpu_mips_start_count(CPUMIPSState
*env
);
668 void cpu_mips_stop_count(CPUMIPSState
*env
);
671 void cpu_mips_soft_irq(CPUMIPSState
*env
, int irq
, int level
);
674 int mips_cpu_handle_mmu_fault(CPUState
*cpu
, vaddr address
, int rw
,
676 #if !defined(CONFIG_USER_ONLY)
677 void r4k_invalidate_tlb (CPUMIPSState
*env
, int idx
, int use_extra
);
678 hwaddr
cpu_mips_translate_address (CPUMIPSState
*env
, target_ulong address
,
681 target_ulong
exception_resume_pc (CPUMIPSState
*env
);
683 static inline void cpu_get_tb_cpu_state(CPUMIPSState
*env
, target_ulong
*pc
,
684 target_ulong
*cs_base
, int *flags
)
686 *pc
= env
->active_tc
.PC
;
688 *flags
= env
->hflags
& (MIPS_HFLAG_TMASK
| MIPS_HFLAG_BMASK
|
689 MIPS_HFLAG_HWRENA_ULR
);
692 static inline int mips_vpe_active(CPUMIPSState
*env
)
696 /* Check that the VPE is enabled. */
697 if (!(env
->mvp
->CP0_MVPControl
& (1 << CP0MVPCo_EVP
))) {
700 /* Check that the VPE is activated. */
701 if (!(env
->CP0_VPEConf0
& (1 << CP0VPEC0_VPA
))) {
705 /* Now verify that there are active thread contexts in the VPE.
707 This assumes the CPU model will internally reschedule threads
708 if the active one goes to sleep. If there are no threads available
709 the active one will be in a sleeping state, and we can turn off
711 if (!(env
->active_tc
.CP0_TCStatus
& (1 << CP0TCSt_A
))) {
712 /* TC is not activated. */
715 if (env
->active_tc
.CP0_TCHalt
& 1) {
716 /* TC is in halt state. */
723 #include "exec/exec-all.h"
725 static inline void compute_hflags(CPUMIPSState
*env
)
727 env
->hflags
&= ~(MIPS_HFLAG_COP1X
| MIPS_HFLAG_64
| MIPS_HFLAG_CP0
|
728 MIPS_HFLAG_F64
| MIPS_HFLAG_FPU
| MIPS_HFLAG_KSU
|
729 MIPS_HFLAG_AWRAP
| MIPS_HFLAG_DSP
| MIPS_HFLAG_DSPR2
);
730 if (!(env
->CP0_Status
& (1 << CP0St_EXL
)) &&
731 !(env
->CP0_Status
& (1 << CP0St_ERL
)) &&
732 !(env
->hflags
& MIPS_HFLAG_DM
)) {
733 env
->hflags
|= (env
->CP0_Status
>> CP0St_KSU
) & MIPS_HFLAG_KSU
;
735 #if defined(TARGET_MIPS64)
736 if (((env
->hflags
& MIPS_HFLAG_KSU
) != MIPS_HFLAG_UM
) ||
737 (env
->CP0_Status
& (1 << CP0St_PX
)) ||
738 (env
->CP0_Status
& (1 << CP0St_UX
))) {
739 env
->hflags
|= MIPS_HFLAG_64
;
742 if (((env
->hflags
& MIPS_HFLAG_KSU
) == MIPS_HFLAG_UM
) &&
743 !(env
->CP0_Status
& (1 << CP0St_UX
))) {
744 env
->hflags
|= MIPS_HFLAG_AWRAP
;
745 } else if (env
->insn_flags
& ISA_MIPS32R6
) {
746 /* Address wrapping for Supervisor and Kernel is specified in R6 */
747 if ((((env
->hflags
& MIPS_HFLAG_KSU
) == MIPS_HFLAG_SM
) &&
748 !(env
->CP0_Status
& (1 << CP0St_SX
))) ||
749 (((env
->hflags
& MIPS_HFLAG_KSU
) == MIPS_HFLAG_KM
) &&
750 !(env
->CP0_Status
& (1 << CP0St_KX
)))) {
751 env
->hflags
|= MIPS_HFLAG_AWRAP
;
755 if ((env
->CP0_Status
& (1 << CP0St_CU0
)) ||
756 !(env
->hflags
& MIPS_HFLAG_KSU
)) {
757 env
->hflags
|= MIPS_HFLAG_CP0
;
759 if (env
->CP0_Status
& (1 << CP0St_CU1
)) {
760 env
->hflags
|= MIPS_HFLAG_FPU
;
762 if (env
->CP0_Status
& (1 << CP0St_FR
)) {
763 env
->hflags
|= MIPS_HFLAG_F64
;
765 if (env
->insn_flags
& ASE_DSPR2
) {
766 /* Enables access MIPS DSP resources, now our cpu is DSP ASER2,
767 so enable to access DSPR2 resources. */
768 if (env
->CP0_Status
& (1 << CP0St_MX
)) {
769 env
->hflags
|= MIPS_HFLAG_DSP
| MIPS_HFLAG_DSPR2
;
772 } else if (env
->insn_flags
& ASE_DSP
) {
773 /* Enables access MIPS DSP resources, now our cpu is DSP ASE,
774 so enable to access DSP resources. */
775 if (env
->CP0_Status
& (1 << CP0St_MX
)) {
776 env
->hflags
|= MIPS_HFLAG_DSP
;
780 if (env
->insn_flags
& ISA_MIPS32R2
) {
781 if (env
->active_fpu
.fcr0
& (1 << FCR0_F64
)) {
782 env
->hflags
|= MIPS_HFLAG_COP1X
;
784 } else if (env
->insn_flags
& ISA_MIPS32
) {
785 if (env
->hflags
& MIPS_HFLAG_64
) {
786 env
->hflags
|= MIPS_HFLAG_COP1X
;
788 } else if (env
->insn_flags
& ISA_MIPS4
) {
789 /* All supported MIPS IV CPUs use the XX (CU3) to enable
790 and disable the MIPS IV extensions to the MIPS III ISA.
791 Some other MIPS IV CPUs ignore the bit, so the check here
792 would be too restrictive for them. */
793 if (env
->CP0_Status
& (1U << CP0St_CU3
)) {
794 env
->hflags
|= MIPS_HFLAG_COP1X
;
799 #endif /* !defined (__MIPS_CPU_H__) */