vga: Add endian to vmstate
[qemu.git] / hw / net / smc91c111.c
blobd1dca8f4e2ea9e7e2ccbc1cb6cd0982ccecfd96f
1 /*
2 * SMSC 91C111 Ethernet interface emulation
4 * Copyright (c) 2005 CodeSourcery, LLC.
5 * Written by Paul Brook
7 * This code is licensed under the GPL
8 */
10 #include "hw/sysbus.h"
11 #include "net/net.h"
12 #include "hw/devices.h"
13 /* For crc32 */
14 #include <zlib.h>
16 /* Number of 2k memory pages available. */
17 #define NUM_PACKETS 4
19 #define TYPE_SMC91C111 "smc91c111"
20 #define SMC91C111(obj) OBJECT_CHECK(smc91c111_state, (obj), TYPE_SMC91C111)
22 typedef struct {
23 SysBusDevice parent_obj;
25 NICState *nic;
26 NICConf conf;
27 uint16_t tcr;
28 uint16_t rcr;
29 uint16_t cr;
30 uint16_t ctr;
31 uint16_t gpr;
32 uint16_t ptr;
33 uint16_t ercv;
34 qemu_irq irq;
35 int bank;
36 int packet_num;
37 int tx_alloc;
38 /* Bitmask of allocated packets. */
39 int allocated;
40 int tx_fifo_len;
41 int tx_fifo[NUM_PACKETS];
42 int rx_fifo_len;
43 int rx_fifo[NUM_PACKETS];
44 int tx_fifo_done_len;
45 int tx_fifo_done[NUM_PACKETS];
46 /* Packet buffer memory. */
47 uint8_t data[NUM_PACKETS][2048];
48 uint8_t int_level;
49 uint8_t int_mask;
50 MemoryRegion mmio;
51 } smc91c111_state;
53 static const VMStateDescription vmstate_smc91c111 = {
54 .name = "smc91c111",
55 .version_id = 1,
56 .minimum_version_id = 1,
57 .fields = (VMStateField[]) {
58 VMSTATE_UINT16(tcr, smc91c111_state),
59 VMSTATE_UINT16(rcr, smc91c111_state),
60 VMSTATE_UINT16(cr, smc91c111_state),
61 VMSTATE_UINT16(ctr, smc91c111_state),
62 VMSTATE_UINT16(gpr, smc91c111_state),
63 VMSTATE_UINT16(ptr, smc91c111_state),
64 VMSTATE_UINT16(ercv, smc91c111_state),
65 VMSTATE_INT32(bank, smc91c111_state),
66 VMSTATE_INT32(packet_num, smc91c111_state),
67 VMSTATE_INT32(tx_alloc, smc91c111_state),
68 VMSTATE_INT32(allocated, smc91c111_state),
69 VMSTATE_INT32(tx_fifo_len, smc91c111_state),
70 VMSTATE_INT32_ARRAY(tx_fifo, smc91c111_state, NUM_PACKETS),
71 VMSTATE_INT32(rx_fifo_len, smc91c111_state),
72 VMSTATE_INT32_ARRAY(rx_fifo, smc91c111_state, NUM_PACKETS),
73 VMSTATE_INT32(tx_fifo_done_len, smc91c111_state),
74 VMSTATE_INT32_ARRAY(tx_fifo_done, smc91c111_state, NUM_PACKETS),
75 VMSTATE_BUFFER_UNSAFE(data, smc91c111_state, 0, NUM_PACKETS * 2048),
76 VMSTATE_UINT8(int_level, smc91c111_state),
77 VMSTATE_UINT8(int_mask, smc91c111_state),
78 VMSTATE_END_OF_LIST()
82 #define RCR_SOFT_RST 0x8000
83 #define RCR_STRIP_CRC 0x0200
84 #define RCR_RXEN 0x0100
86 #define TCR_EPH_LOOP 0x2000
87 #define TCR_NOCRC 0x0100
88 #define TCR_PAD_EN 0x0080
89 #define TCR_FORCOL 0x0004
90 #define TCR_LOOP 0x0002
91 #define TCR_TXEN 0x0001
93 #define INT_MD 0x80
94 #define INT_ERCV 0x40
95 #define INT_EPH 0x20
96 #define INT_RX_OVRN 0x10
97 #define INT_ALLOC 0x08
98 #define INT_TX_EMPTY 0x04
99 #define INT_TX 0x02
100 #define INT_RCV 0x01
102 #define CTR_AUTO_RELEASE 0x0800
103 #define CTR_RELOAD 0x0002
104 #define CTR_STORE 0x0001
106 #define RS_ALGNERR 0x8000
107 #define RS_BRODCAST 0x4000
108 #define RS_BADCRC 0x2000
109 #define RS_ODDFRAME 0x1000
110 #define RS_TOOLONG 0x0800
111 #define RS_TOOSHORT 0x0400
112 #define RS_MULTICAST 0x0001
114 /* Update interrupt status. */
115 static void smc91c111_update(smc91c111_state *s)
117 int level;
119 if (s->tx_fifo_len == 0)
120 s->int_level |= INT_TX_EMPTY;
121 if (s->tx_fifo_done_len != 0)
122 s->int_level |= INT_TX;
123 level = (s->int_level & s->int_mask) != 0;
124 qemu_set_irq(s->irq, level);
127 /* Try to allocate a packet. Returns 0x80 on failure. */
128 static int smc91c111_allocate_packet(smc91c111_state *s)
130 int i;
131 if (s->allocated == (1 << NUM_PACKETS) - 1) {
132 return 0x80;
135 for (i = 0; i < NUM_PACKETS; i++) {
136 if ((s->allocated & (1 << i)) == 0)
137 break;
139 s->allocated |= 1 << i;
140 return i;
144 /* Process a pending TX allocate. */
145 static void smc91c111_tx_alloc(smc91c111_state *s)
147 s->tx_alloc = smc91c111_allocate_packet(s);
148 if (s->tx_alloc == 0x80)
149 return;
150 s->int_level |= INT_ALLOC;
151 smc91c111_update(s);
154 /* Remove and item from the RX FIFO. */
155 static void smc91c111_pop_rx_fifo(smc91c111_state *s)
157 int i;
159 s->rx_fifo_len--;
160 if (s->rx_fifo_len) {
161 for (i = 0; i < s->rx_fifo_len; i++)
162 s->rx_fifo[i] = s->rx_fifo[i + 1];
163 s->int_level |= INT_RCV;
164 } else {
165 s->int_level &= ~INT_RCV;
167 smc91c111_update(s);
170 /* Remove an item from the TX completion FIFO. */
171 static void smc91c111_pop_tx_fifo_done(smc91c111_state *s)
173 int i;
175 if (s->tx_fifo_done_len == 0)
176 return;
177 s->tx_fifo_done_len--;
178 for (i = 0; i < s->tx_fifo_done_len; i++)
179 s->tx_fifo_done[i] = s->tx_fifo_done[i + 1];
182 /* Release the memory allocated to a packet. */
183 static void smc91c111_release_packet(smc91c111_state *s, int packet)
185 s->allocated &= ~(1 << packet);
186 if (s->tx_alloc == 0x80)
187 smc91c111_tx_alloc(s);
188 qemu_flush_queued_packets(qemu_get_queue(s->nic));
191 /* Flush the TX FIFO. */
192 static void smc91c111_do_tx(smc91c111_state *s)
194 int i;
195 int len;
196 int control;
197 int packetnum;
198 uint8_t *p;
200 if ((s->tcr & TCR_TXEN) == 0)
201 return;
202 if (s->tx_fifo_len == 0)
203 return;
204 for (i = 0; i < s->tx_fifo_len; i++) {
205 packetnum = s->tx_fifo[i];
206 p = &s->data[packetnum][0];
207 /* Set status word. */
208 *(p++) = 0x01;
209 *(p++) = 0x40;
210 len = *(p++);
211 len |= ((int)*(p++)) << 8;
212 len -= 6;
213 control = p[len + 1];
214 if (control & 0x20)
215 len++;
216 /* ??? This overwrites the data following the buffer.
217 Don't know what real hardware does. */
218 if (len < 64 && (s->tcr & TCR_PAD_EN)) {
219 memset(p + len, 0, 64 - len);
220 len = 64;
222 #if 0
224 int add_crc;
226 /* The card is supposed to append the CRC to the frame.
227 However none of the other network traffic has the CRC
228 appended. Suspect this is low level ethernet detail we
229 don't need to worry about. */
230 add_crc = (control & 0x10) || (s->tcr & TCR_NOCRC) == 0;
231 if (add_crc) {
232 uint32_t crc;
234 crc = crc32(~0, p, len);
235 memcpy(p + len, &crc, 4);
236 len += 4;
239 #endif
240 if (s->ctr & CTR_AUTO_RELEASE)
241 /* Race? */
242 smc91c111_release_packet(s, packetnum);
243 else if (s->tx_fifo_done_len < NUM_PACKETS)
244 s->tx_fifo_done[s->tx_fifo_done_len++] = packetnum;
245 qemu_send_packet(qemu_get_queue(s->nic), p, len);
247 s->tx_fifo_len = 0;
248 smc91c111_update(s);
251 /* Add a packet to the TX FIFO. */
252 static void smc91c111_queue_tx(smc91c111_state *s, int packet)
254 if (s->tx_fifo_len == NUM_PACKETS)
255 return;
256 s->tx_fifo[s->tx_fifo_len++] = packet;
257 smc91c111_do_tx(s);
260 static void smc91c111_reset(DeviceState *dev)
262 smc91c111_state *s = SMC91C111(dev);
264 s->bank = 0;
265 s->tx_fifo_len = 0;
266 s->tx_fifo_done_len = 0;
267 s->rx_fifo_len = 0;
268 s->allocated = 0;
269 s->packet_num = 0;
270 s->tx_alloc = 0;
271 s->tcr = 0;
272 s->rcr = 0;
273 s->cr = 0xa0b1;
274 s->ctr = 0x1210;
275 s->ptr = 0;
276 s->ercv = 0x1f;
277 s->int_level = INT_TX_EMPTY;
278 s->int_mask = 0;
279 smc91c111_update(s);
282 #define SET_LOW(name, val) s->name = (s->name & 0xff00) | val
283 #define SET_HIGH(name, val) s->name = (s->name & 0xff) | (val << 8)
285 static void smc91c111_writeb(void *opaque, hwaddr offset,
286 uint32_t value)
288 smc91c111_state *s = (smc91c111_state *)opaque;
290 offset = offset & 0xf;
291 if (offset == 14) {
292 s->bank = value;
293 return;
295 if (offset == 15)
296 return;
297 switch (s->bank) {
298 case 0:
299 switch (offset) {
300 case 0: /* TCR */
301 SET_LOW(tcr, value);
302 return;
303 case 1:
304 SET_HIGH(tcr, value);
305 return;
306 case 4: /* RCR */
307 SET_LOW(rcr, value);
308 return;
309 case 5:
310 SET_HIGH(rcr, value);
311 if (s->rcr & RCR_SOFT_RST) {
312 smc91c111_reset(DEVICE(s));
314 return;
315 case 10: case 11: /* RPCR */
316 /* Ignored */
317 return;
318 case 12: case 13: /* Reserved */
319 return;
321 break;
323 case 1:
324 switch (offset) {
325 case 0: /* CONFIG */
326 SET_LOW(cr, value);
327 return;
328 case 1:
329 SET_HIGH(cr,value);
330 return;
331 case 2: case 3: /* BASE */
332 case 4: case 5: case 6: case 7: case 8: case 9: /* IA */
333 /* Not implemented. */
334 return;
335 case 10: /* Genral Purpose */
336 SET_LOW(gpr, value);
337 return;
338 case 11:
339 SET_HIGH(gpr, value);
340 return;
341 case 12: /* Control */
342 if (value & 1)
343 fprintf(stderr, "smc91c111:EEPROM store not implemented\n");
344 if (value & 2)
345 fprintf(stderr, "smc91c111:EEPROM reload not implemented\n");
346 value &= ~3;
347 SET_LOW(ctr, value);
348 return;
349 case 13:
350 SET_HIGH(ctr, value);
351 return;
353 break;
355 case 2:
356 switch (offset) {
357 case 0: /* MMU Command */
358 switch (value >> 5) {
359 case 0: /* no-op */
360 break;
361 case 1: /* Allocate for TX. */
362 s->tx_alloc = 0x80;
363 s->int_level &= ~INT_ALLOC;
364 smc91c111_update(s);
365 smc91c111_tx_alloc(s);
366 break;
367 case 2: /* Reset MMU. */
368 s->allocated = 0;
369 s->tx_fifo_len = 0;
370 s->tx_fifo_done_len = 0;
371 s->rx_fifo_len = 0;
372 s->tx_alloc = 0;
373 break;
374 case 3: /* Remove from RX FIFO. */
375 smc91c111_pop_rx_fifo(s);
376 break;
377 case 4: /* Remove from RX FIFO and release. */
378 if (s->rx_fifo_len > 0) {
379 smc91c111_release_packet(s, s->rx_fifo[0]);
381 smc91c111_pop_rx_fifo(s);
382 break;
383 case 5: /* Release. */
384 smc91c111_release_packet(s, s->packet_num);
385 break;
386 case 6: /* Add to TX FIFO. */
387 smc91c111_queue_tx(s, s->packet_num);
388 break;
389 case 7: /* Reset TX FIFO. */
390 s->tx_fifo_len = 0;
391 s->tx_fifo_done_len = 0;
392 break;
394 return;
395 case 1:
396 /* Ignore. */
397 return;
398 case 2: /* Packet Number Register */
399 s->packet_num = value;
400 return;
401 case 3: case 4: case 5:
402 /* Should be readonly, but linux writes to them anyway. Ignore. */
403 return;
404 case 6: /* Pointer */
405 SET_LOW(ptr, value);
406 return;
407 case 7:
408 SET_HIGH(ptr, value);
409 return;
410 case 8: case 9: case 10: case 11: /* Data */
412 int p;
413 int n;
415 if (s->ptr & 0x8000)
416 n = s->rx_fifo[0];
417 else
418 n = s->packet_num;
419 p = s->ptr & 0x07ff;
420 if (s->ptr & 0x4000) {
421 s->ptr = (s->ptr & 0xf800) | ((s->ptr + 1) & 0x7ff);
422 } else {
423 p += (offset & 3);
425 s->data[n][p] = value;
427 return;
428 case 12: /* Interrupt ACK. */
429 s->int_level &= ~(value & 0xd6);
430 if (value & INT_TX)
431 smc91c111_pop_tx_fifo_done(s);
432 smc91c111_update(s);
433 return;
434 case 13: /* Interrupt mask. */
435 s->int_mask = value;
436 smc91c111_update(s);
437 return;
439 break;
441 case 3:
442 switch (offset) {
443 case 0: case 1: case 2: case 3: case 4: case 5: case 6: case 7:
444 /* Multicast table. */
445 /* Not implemented. */
446 return;
447 case 8: case 9: /* Management Interface. */
448 /* Not implemented. */
449 return;
450 case 12: /* Early receive. */
451 s->ercv = value & 0x1f;
452 return;
453 case 13:
454 /* Ignore. */
455 return;
457 break;
459 hw_error("smc91c111_write: Bad reg %d:%x\n", s->bank, (int)offset);
462 static uint32_t smc91c111_readb(void *opaque, hwaddr offset)
464 smc91c111_state *s = (smc91c111_state *)opaque;
466 offset = offset & 0xf;
467 if (offset == 14) {
468 return s->bank;
470 if (offset == 15)
471 return 0x33;
472 switch (s->bank) {
473 case 0:
474 switch (offset) {
475 case 0: /* TCR */
476 return s->tcr & 0xff;
477 case 1:
478 return s->tcr >> 8;
479 case 2: /* EPH Status */
480 return 0;
481 case 3:
482 return 0x40;
483 case 4: /* RCR */
484 return s->rcr & 0xff;
485 case 5:
486 return s->rcr >> 8;
487 case 6: /* Counter */
488 case 7:
489 /* Not implemented. */
490 return 0;
491 case 8: /* Memory size. */
492 return NUM_PACKETS;
493 case 9: /* Free memory available. */
495 int i;
496 int n;
497 n = 0;
498 for (i = 0; i < NUM_PACKETS; i++) {
499 if (s->allocated & (1 << i))
500 n++;
502 return n;
504 case 10: case 11: /* RPCR */
505 /* Not implemented. */
506 return 0;
507 case 12: case 13: /* Reserved */
508 return 0;
510 break;
512 case 1:
513 switch (offset) {
514 case 0: /* CONFIG */
515 return s->cr & 0xff;
516 case 1:
517 return s->cr >> 8;
518 case 2: case 3: /* BASE */
519 /* Not implemented. */
520 return 0;
521 case 4: case 5: case 6: case 7: case 8: case 9: /* IA */
522 return s->conf.macaddr.a[offset - 4];
523 case 10: /* General Purpose */
524 return s->gpr & 0xff;
525 case 11:
526 return s->gpr >> 8;
527 case 12: /* Control */
528 return s->ctr & 0xff;
529 case 13:
530 return s->ctr >> 8;
532 break;
534 case 2:
535 switch (offset) {
536 case 0: case 1: /* MMUCR Busy bit. */
537 return 0;
538 case 2: /* Packet Number. */
539 return s->packet_num;
540 case 3: /* Allocation Result. */
541 return s->tx_alloc;
542 case 4: /* TX FIFO */
543 if (s->tx_fifo_done_len == 0)
544 return 0x80;
545 else
546 return s->tx_fifo_done[0];
547 case 5: /* RX FIFO */
548 if (s->rx_fifo_len == 0)
549 return 0x80;
550 else
551 return s->rx_fifo[0];
552 case 6: /* Pointer */
553 return s->ptr & 0xff;
554 case 7:
555 return (s->ptr >> 8) & 0xf7;
556 case 8: case 9: case 10: case 11: /* Data */
558 int p;
559 int n;
561 if (s->ptr & 0x8000)
562 n = s->rx_fifo[0];
563 else
564 n = s->packet_num;
565 p = s->ptr & 0x07ff;
566 if (s->ptr & 0x4000) {
567 s->ptr = (s->ptr & 0xf800) | ((s->ptr + 1) & 0x07ff);
568 } else {
569 p += (offset & 3);
571 return s->data[n][p];
573 case 12: /* Interrupt status. */
574 return s->int_level;
575 case 13: /* Interrupt mask. */
576 return s->int_mask;
578 break;
580 case 3:
581 switch (offset) {
582 case 0: case 1: case 2: case 3: case 4: case 5: case 6: case 7:
583 /* Multicast table. */
584 /* Not implemented. */
585 return 0;
586 case 8: /* Management Interface. */
587 /* Not implemented. */
588 return 0x30;
589 case 9:
590 return 0x33;
591 case 10: /* Revision. */
592 return 0x91;
593 case 11:
594 return 0x33;
595 case 12:
596 return s->ercv;
597 case 13:
598 return 0;
600 break;
602 hw_error("smc91c111_read: Bad reg %d:%x\n", s->bank, (int)offset);
603 return 0;
606 static void smc91c111_writew(void *opaque, hwaddr offset,
607 uint32_t value)
609 smc91c111_writeb(opaque, offset, value & 0xff);
610 smc91c111_writeb(opaque, offset + 1, value >> 8);
613 static void smc91c111_writel(void *opaque, hwaddr offset,
614 uint32_t value)
616 /* 32-bit writes to offset 0xc only actually write to the bank select
617 register (offset 0xe) */
618 if (offset != 0xc)
619 smc91c111_writew(opaque, offset, value & 0xffff);
620 smc91c111_writew(opaque, offset + 2, value >> 16);
623 static uint32_t smc91c111_readw(void *opaque, hwaddr offset)
625 uint32_t val;
626 val = smc91c111_readb(opaque, offset);
627 val |= smc91c111_readb(opaque, offset + 1) << 8;
628 return val;
631 static uint32_t smc91c111_readl(void *opaque, hwaddr offset)
633 uint32_t val;
634 val = smc91c111_readw(opaque, offset);
635 val |= smc91c111_readw(opaque, offset + 2) << 16;
636 return val;
639 static int smc91c111_can_receive(NetClientState *nc)
641 smc91c111_state *s = qemu_get_nic_opaque(nc);
643 if ((s->rcr & RCR_RXEN) == 0 || (s->rcr & RCR_SOFT_RST))
644 return 1;
645 if (s->allocated == (1 << NUM_PACKETS) - 1)
646 return 0;
647 return 1;
650 static ssize_t smc91c111_receive(NetClientState *nc, const uint8_t *buf, size_t size)
652 smc91c111_state *s = qemu_get_nic_opaque(nc);
653 int status;
654 int packetsize;
655 uint32_t crc;
656 int packetnum;
657 uint8_t *p;
659 if ((s->rcr & RCR_RXEN) == 0 || (s->rcr & RCR_SOFT_RST))
660 return -1;
661 /* Short packets are padded with zeros. Receiving a packet
662 < 64 bytes long is considered an error condition. */
663 if (size < 64)
664 packetsize = 64;
665 else
666 packetsize = (size & ~1);
667 packetsize += 6;
668 crc = (s->rcr & RCR_STRIP_CRC) == 0;
669 if (crc)
670 packetsize += 4;
671 /* TODO: Flag overrun and receive errors. */
672 if (packetsize > 2048)
673 return -1;
674 packetnum = smc91c111_allocate_packet(s);
675 if (packetnum == 0x80)
676 return -1;
677 s->rx_fifo[s->rx_fifo_len++] = packetnum;
679 p = &s->data[packetnum][0];
680 /* ??? Multicast packets? */
681 status = 0;
682 if (size > 1518)
683 status |= RS_TOOLONG;
684 if (size & 1)
685 status |= RS_ODDFRAME;
686 *(p++) = status & 0xff;
687 *(p++) = status >> 8;
688 *(p++) = packetsize & 0xff;
689 *(p++) = packetsize >> 8;
690 memcpy(p, buf, size & ~1);
691 p += (size & ~1);
692 /* Pad short packets. */
693 if (size < 64) {
694 int pad;
696 if (size & 1)
697 *(p++) = buf[size - 1];
698 pad = 64 - size;
699 memset(p, 0, pad);
700 p += pad;
701 size = 64;
703 /* It's not clear if the CRC should go before or after the last byte in
704 odd sized packets. Linux disables the CRC, so that's no help.
705 The pictures in the documentation show the CRC aligned on a 16-bit
706 boundary before the last odd byte, so that's what we do. */
707 if (crc) {
708 crc = crc32(~0, buf, size);
709 *(p++) = crc & 0xff; crc >>= 8;
710 *(p++) = crc & 0xff; crc >>= 8;
711 *(p++) = crc & 0xff; crc >>= 8;
712 *(p++) = crc & 0xff;
714 if (size & 1) {
715 *(p++) = buf[size - 1];
716 *p = 0x60;
717 } else {
718 *(p++) = 0;
719 *p = 0x40;
721 /* TODO: Raise early RX interrupt? */
722 s->int_level |= INT_RCV;
723 smc91c111_update(s);
725 return size;
728 static const MemoryRegionOps smc91c111_mem_ops = {
729 /* The special case for 32 bit writes to 0xc means we can't just
730 * set .impl.min/max_access_size to 1, unfortunately
732 .old_mmio = {
733 .read = { smc91c111_readb, smc91c111_readw, smc91c111_readl, },
734 .write = { smc91c111_writeb, smc91c111_writew, smc91c111_writel, },
736 .endianness = DEVICE_NATIVE_ENDIAN,
739 static void smc91c111_cleanup(NetClientState *nc)
741 smc91c111_state *s = qemu_get_nic_opaque(nc);
743 s->nic = NULL;
746 static NetClientInfo net_smc91c111_info = {
747 .type = NET_CLIENT_OPTIONS_KIND_NIC,
748 .size = sizeof(NICState),
749 .can_receive = smc91c111_can_receive,
750 .receive = smc91c111_receive,
751 .cleanup = smc91c111_cleanup,
754 static int smc91c111_init1(SysBusDevice *sbd)
756 DeviceState *dev = DEVICE(sbd);
757 smc91c111_state *s = SMC91C111(dev);
759 memory_region_init_io(&s->mmio, OBJECT(s), &smc91c111_mem_ops, s,
760 "smc91c111-mmio", 16);
761 sysbus_init_mmio(sbd, &s->mmio);
762 sysbus_init_irq(sbd, &s->irq);
763 qemu_macaddr_default_if_unset(&s->conf.macaddr);
764 s->nic = qemu_new_nic(&net_smc91c111_info, &s->conf,
765 object_get_typename(OBJECT(dev)), dev->id, s);
766 qemu_format_nic_info_str(qemu_get_queue(s->nic), s->conf.macaddr.a);
767 /* ??? Save/restore. */
768 return 0;
771 static Property smc91c111_properties[] = {
772 DEFINE_NIC_PROPERTIES(smc91c111_state, conf),
773 DEFINE_PROP_END_OF_LIST(),
776 static void smc91c111_class_init(ObjectClass *klass, void *data)
778 DeviceClass *dc = DEVICE_CLASS(klass);
779 SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
781 k->init = smc91c111_init1;
782 dc->reset = smc91c111_reset;
783 dc->vmsd = &vmstate_smc91c111;
784 dc->props = smc91c111_properties;
787 static const TypeInfo smc91c111_info = {
788 .name = TYPE_SMC91C111,
789 .parent = TYPE_SYS_BUS_DEVICE,
790 .instance_size = sizeof(smc91c111_state),
791 .class_init = smc91c111_class_init,
794 static void smc91c111_register_types(void)
796 type_register_static(&smc91c111_info);
799 /* Legacy helper function. Should go away when machine config files are
800 implemented. */
801 void smc91c111_init(NICInfo *nd, uint32_t base, qemu_irq irq)
803 DeviceState *dev;
804 SysBusDevice *s;
806 qemu_check_nic_model(nd, "smc91c111");
807 dev = qdev_create(NULL, TYPE_SMC91C111);
808 qdev_set_nic_properties(dev, nd);
809 qdev_init_nofail(dev);
810 s = SYS_BUS_DEVICE(dev);
811 sysbus_mmio_map(s, 0, base);
812 sysbus_connect_irq(s, 0, irq);
815 type_init(smc91c111_register_types)