2 * ARM Integrator CP System emulation.
4 * Copyright (c) 2005-2007 CodeSourcery.
5 * Written by Paul Brook
7 * This code is licenced under the GPL
11 #include "primecell.h"
21 uint32_t flash_offset
;
35 static uint8_t integrator_spd
[128] = {
36 128, 8, 4, 11, 9, 1, 64, 0, 2, 0xa0, 0xa0, 0, 0, 8, 0, 1,
37 0xe, 4, 0x1c, 1, 2, 0x20, 0xc0, 0, 0, 0, 0, 0x30, 0x28, 0x30, 0x28, 0x40
40 static uint32_t integratorcm_read(void *opaque
, target_phys_addr_t offset
)
42 integratorcm_state
*s
= (integratorcm_state
*)opaque
;
43 if (offset
>= 0x100 && offset
< 0x200) {
47 return integrator_spd
[offset
>> 2];
49 switch (offset
>> 2) {
61 if (s
->cm_lock
== 0xa05f) {
66 case 6: /* CM_LMBUSCNT */
67 /* ??? High frequency timer. */
68 hw_error("integratorcm_read: CM_LMBUSCNT");
69 case 7: /* CM_AUXOSC */
71 case 8: /* CM_SDRAM */
75 case 10: /* CM_REFCT */
76 /* ??? High frequency timer. */
77 hw_error("integratorcm_read: CM_REFCT");
78 case 12: /* CM_FLAGS */
80 case 14: /* CM_NVFLAGS */
82 case 16: /* CM_IRQ_STAT */
83 return s
->int_level
& s
->irq_enabled
;
84 case 17: /* CM_IRQ_RSTAT */
86 case 18: /* CM_IRQ_ENSET */
87 return s
->irq_enabled
;
88 case 20: /* CM_SOFT_INTSET */
89 return s
->int_level
& 1;
90 case 24: /* CM_FIQ_STAT */
91 return s
->int_level
& s
->fiq_enabled
;
92 case 25: /* CM_FIQ_RSTAT */
94 case 26: /* CM_FIQ_ENSET */
95 return s
->fiq_enabled
;
96 case 32: /* CM_VOLTAGE_CTL0 */
97 case 33: /* CM_VOLTAGE_CTL1 */
98 case 34: /* CM_VOLTAGE_CTL2 */
99 case 35: /* CM_VOLTAGE_CTL3 */
100 /* ??? Voltage control unimplemented. */
103 hw_error("integratorcm_read: Unimplemented offset 0x%x\n",
109 static void integratorcm_do_remap(integratorcm_state
*s
, int flash
)
112 cpu_register_physical_memory(0, 0x100000, IO_MEM_RAM
);
114 cpu_register_physical_memory(0, 0x100000, s
->flash_offset
| IO_MEM_RAM
);
116 //??? tlb_flush (cpu_single_env, 1);
119 static void integratorcm_set_ctrl(integratorcm_state
*s
, uint32_t value
)
122 hw_error("Board reset\n");
124 if ((s
->cm_init
^ value
) & 4) {
125 integratorcm_do_remap(s
, (value
& 4) == 0);
127 if ((s
->cm_init
^ value
) & 1) {
128 printf("Green LED %s\n", (value
& 1) ? "on" : "off");
130 s
->cm_init
= (s
->cm_init
& ~ 5) | (value
^ 5);
133 static void integratorcm_update(integratorcm_state
*s
)
135 /* ??? The CPU irq/fiq is raised when either the core module or base PIC
137 if (s
->int_level
& (s
->irq_enabled
| s
->fiq_enabled
))
138 hw_error("Core module interrupt\n");
141 static void integratorcm_write(void *opaque
, target_phys_addr_t offset
,
144 integratorcm_state
*s
= (integratorcm_state
*)opaque
;
145 switch (offset
>> 2) {
147 if (s
->cm_lock
== 0xa05f)
150 case 3: /* CM_CTRL */
151 integratorcm_set_ctrl(s
, value
);
153 case 5: /* CM_LOCK */
154 s
->cm_lock
= value
& 0xffff;
156 case 7: /* CM_AUXOSC */
157 if (s
->cm_lock
== 0xa05f)
158 s
->cm_auxosc
= value
;
160 case 8: /* CM_SDRAM */
163 case 9: /* CM_INIT */
164 /* ??? This can change the memory bus frequency. */
167 case 12: /* CM_FLAGSS */
168 s
->cm_flags
|= value
;
170 case 13: /* CM_FLAGSC */
171 s
->cm_flags
&= ~value
;
173 case 14: /* CM_NVFLAGSS */
174 s
->cm_nvflags
|= value
;
176 case 15: /* CM_NVFLAGSS */
177 s
->cm_nvflags
&= ~value
;
179 case 18: /* CM_IRQ_ENSET */
180 s
->irq_enabled
|= value
;
181 integratorcm_update(s
);
183 case 19: /* CM_IRQ_ENCLR */
184 s
->irq_enabled
&= ~value
;
185 integratorcm_update(s
);
187 case 20: /* CM_SOFT_INTSET */
188 s
->int_level
|= (value
& 1);
189 integratorcm_update(s
);
191 case 21: /* CM_SOFT_INTCLR */
192 s
->int_level
&= ~(value
& 1);
193 integratorcm_update(s
);
195 case 26: /* CM_FIQ_ENSET */
196 s
->fiq_enabled
|= value
;
197 integratorcm_update(s
);
199 case 27: /* CM_FIQ_ENCLR */
200 s
->fiq_enabled
&= ~value
;
201 integratorcm_update(s
);
203 case 32: /* CM_VOLTAGE_CTL0 */
204 case 33: /* CM_VOLTAGE_CTL1 */
205 case 34: /* CM_VOLTAGE_CTL2 */
206 case 35: /* CM_VOLTAGE_CTL3 */
207 /* ??? Voltage control unimplemented. */
210 hw_error("integratorcm_write: Unimplemented offset 0x%x\n",
216 /* Integrator/CM control registers. */
218 static CPUReadMemoryFunc
* const integratorcm_readfn
[] = {
224 static CPUWriteMemoryFunc
* const integratorcm_writefn
[] = {
230 static int integratorcm_init(SysBusDevice
*dev
)
233 integratorcm_state
*s
= FROM_SYSBUS(integratorcm_state
, dev
);
235 s
->cm_osc
= 0x01000048;
236 /* ??? What should the high bits of this value be? */
237 s
->cm_auxosc
= 0x0007feff;
238 s
->cm_sdram
= 0x00011122;
239 if (s
->memsz
>= 256) {
240 integrator_spd
[31] = 64;
242 } else if (s
->memsz
>= 128) {
243 integrator_spd
[31] = 32;
245 } else if (s
->memsz
>= 64) {
246 integrator_spd
[31] = 16;
248 } else if (s
->memsz
>= 32) {
249 integrator_spd
[31] = 4;
252 integrator_spd
[31] = 2;
254 memcpy(integrator_spd
+ 73, "QEMU-MEMORY", 11);
255 s
->cm_init
= 0x00000112;
256 s
->flash_offset
= qemu_ram_alloc(0x100000);
258 iomemtype
= cpu_register_io_memory(integratorcm_readfn
,
259 integratorcm_writefn
, s
);
260 sysbus_init_mmio(dev
, 0x00800000, iomemtype
);
261 integratorcm_do_remap(s
, 1);
262 /* ??? Save/restore. */
266 /* Integrator/CP hardware emulation. */
267 /* Primary interrupt controller. */
269 typedef struct icp_pic_state
273 uint32_t irq_enabled
;
274 uint32_t fiq_enabled
;
279 static void icp_pic_update(icp_pic_state
*s
)
283 flags
= (s
->level
& s
->irq_enabled
);
284 qemu_set_irq(s
->parent_irq
, flags
!= 0);
285 flags
= (s
->level
& s
->fiq_enabled
);
286 qemu_set_irq(s
->parent_fiq
, flags
!= 0);
289 static void icp_pic_set_irq(void *opaque
, int irq
, int level
)
291 icp_pic_state
*s
= (icp_pic_state
*)opaque
;
293 s
->level
|= 1 << irq
;
295 s
->level
&= ~(1 << irq
);
299 static uint32_t icp_pic_read(void *opaque
, target_phys_addr_t offset
)
301 icp_pic_state
*s
= (icp_pic_state
*)opaque
;
303 switch (offset
>> 2) {
304 case 0: /* IRQ_STATUS */
305 return s
->level
& s
->irq_enabled
;
306 case 1: /* IRQ_RAWSTAT */
308 case 2: /* IRQ_ENABLESET */
309 return s
->irq_enabled
;
310 case 4: /* INT_SOFTSET */
312 case 8: /* FRQ_STATUS */
313 return s
->level
& s
->fiq_enabled
;
314 case 9: /* FRQ_RAWSTAT */
316 case 10: /* FRQ_ENABLESET */
317 return s
->fiq_enabled
;
318 case 3: /* IRQ_ENABLECLR */
319 case 5: /* INT_SOFTCLR */
320 case 11: /* FRQ_ENABLECLR */
322 printf ("icp_pic_read: Bad register offset 0x%x\n", (int)offset
);
327 static void icp_pic_write(void *opaque
, target_phys_addr_t offset
,
330 icp_pic_state
*s
= (icp_pic_state
*)opaque
;
332 switch (offset
>> 2) {
333 case 2: /* IRQ_ENABLESET */
334 s
->irq_enabled
|= value
;
336 case 3: /* IRQ_ENABLECLR */
337 s
->irq_enabled
&= ~value
;
339 case 4: /* INT_SOFTSET */
341 icp_pic_set_irq(s
, 0, 1);
343 case 5: /* INT_SOFTCLR */
345 icp_pic_set_irq(s
, 0, 0);
347 case 10: /* FRQ_ENABLESET */
348 s
->fiq_enabled
|= value
;
350 case 11: /* FRQ_ENABLECLR */
351 s
->fiq_enabled
&= ~value
;
353 case 0: /* IRQ_STATUS */
354 case 1: /* IRQ_RAWSTAT */
355 case 8: /* FRQ_STATUS */
356 case 9: /* FRQ_RAWSTAT */
358 printf ("icp_pic_write: Bad register offset 0x%x\n", (int)offset
);
364 static CPUReadMemoryFunc
* const icp_pic_readfn
[] = {
370 static CPUWriteMemoryFunc
* const icp_pic_writefn
[] = {
376 static int icp_pic_init(SysBusDevice
*dev
)
378 icp_pic_state
*s
= FROM_SYSBUS(icp_pic_state
, dev
);
381 qdev_init_gpio_in(&dev
->qdev
, icp_pic_set_irq
, 32);
382 sysbus_init_irq(dev
, &s
->parent_irq
);
383 sysbus_init_irq(dev
, &s
->parent_fiq
);
384 iomemtype
= cpu_register_io_memory(icp_pic_readfn
,
386 sysbus_init_mmio(dev
, 0x00800000, iomemtype
);
390 /* CP control registers. */
391 static uint32_t icp_control_read(void *opaque
, target_phys_addr_t offset
)
393 switch (offset
>> 2) {
394 case 0: /* CP_IDFIELD */
396 case 1: /* CP_FLASHPROG */
398 case 2: /* CP_INTREG */
400 case 3: /* CP_DECODE */
403 hw_error("icp_control_read: Bad offset %x\n", (int)offset
);
408 static void icp_control_write(void *opaque
, target_phys_addr_t offset
,
411 switch (offset
>> 2) {
412 case 1: /* CP_FLASHPROG */
413 case 2: /* CP_INTREG */
414 case 3: /* CP_DECODE */
415 /* Nothing interesting implemented yet. */
418 hw_error("icp_control_write: Bad offset %x\n", (int)offset
);
421 static CPUReadMemoryFunc
* const icp_control_readfn
[] = {
427 static CPUWriteMemoryFunc
* const icp_control_writefn
[] = {
433 static void icp_control_init(uint32_t base
)
437 iomemtype
= cpu_register_io_memory(icp_control_readfn
,
438 icp_control_writefn
, NULL
);
439 cpu_register_physical_memory(base
, 0x00800000, iomemtype
);
440 /* ??? Save/restore. */
446 static struct arm_boot_info integrator_binfo
= {
451 static void integratorcp_init(ram_addr_t ram_size
,
452 const char *boot_device
,
453 const char *kernel_filename
, const char *kernel_cmdline
,
454 const char *initrd_filename
, const char *cpu_model
)
457 ram_addr_t ram_offset
;
464 cpu_model
= "arm926";
465 env
= cpu_init(cpu_model
);
467 fprintf(stderr
, "Unable to find CPU definition\n");
470 ram_offset
= qemu_ram_alloc(ram_size
);
471 /* ??? On a real system the first 1Mb is mapped as SSRAM or boot flash. */
472 /* ??? RAM should repeat to fill physical memory space. */
473 /* SDRAM at address zero*/
474 cpu_register_physical_memory(0, ram_size
, ram_offset
| IO_MEM_RAM
);
475 /* And again at address 0x80000000 */
476 cpu_register_physical_memory(0x80000000, ram_size
, ram_offset
| IO_MEM_RAM
);
478 dev
= qdev_create(NULL
, "integrator_core");
479 qdev_prop_set_uint32(dev
, "memsz", ram_size
>> 20);
481 sysbus_mmio_map((SysBusDevice
*)dev
, 0, 0x10000000);
483 cpu_pic
= arm_pic_init_cpu(env
);
484 dev
= sysbus_create_varargs("integrator_pic", 0x14000000,
485 cpu_pic
[ARM_PIC_CPU_IRQ
],
486 cpu_pic
[ARM_PIC_CPU_FIQ
], NULL
);
487 for (i
= 0; i
< 32; i
++) {
488 pic
[i
] = qdev_get_gpio_in(dev
, i
);
490 sysbus_create_simple("integrator_pic", 0xca000000, pic
[26]);
491 sysbus_create_varargs("integrator_pit", 0x13000000,
492 pic
[5], pic
[6], pic
[7], NULL
);
493 sysbus_create_simple("pl031", 0x15000000, pic
[8]);
494 sysbus_create_simple("pl011", 0x16000000, pic
[1]);
495 sysbus_create_simple("pl011", 0x17000000, pic
[2]);
496 icp_control_init(0xcb000000);
497 sysbus_create_simple("pl050_keyboard", 0x18000000, pic
[3]);
498 sysbus_create_simple("pl050_mouse", 0x19000000, pic
[4]);
499 sysbus_create_varargs("pl181", 0x1c000000, pic
[23], pic
[24], NULL
);
500 if (nd_table
[0].vlan
)
501 smc91c111_init(&nd_table
[0], 0xc8000000, pic
[27]);
503 sysbus_create_simple("pl110", 0xc0000000, pic
[22]);
505 integrator_binfo
.ram_size
= ram_size
;
506 integrator_binfo
.kernel_filename
= kernel_filename
;
507 integrator_binfo
.kernel_cmdline
= kernel_cmdline
;
508 integrator_binfo
.initrd_filename
= initrd_filename
;
509 arm_load_kernel(env
, &integrator_binfo
);
512 static QEMUMachine integratorcp_machine
= {
513 .name
= "integratorcp",
514 .desc
= "ARM Integrator/CP (ARM926EJ-S)",
515 .init
= integratorcp_init
,
519 static void integratorcp_machine_init(void)
521 qemu_register_machine(&integratorcp_machine
);
524 machine_init(integratorcp_machine_init
);
526 static SysBusDeviceInfo core_info
= {
527 .init
= integratorcm_init
,
528 .qdev
.name
= "integrator_core",
529 .qdev
.size
= sizeof(integratorcm_state
),
530 .qdev
.props
= (Property
[]) {
531 DEFINE_PROP_UINT32("memsz", integratorcm_state
, memsz
, 0),
532 DEFINE_PROP_END_OF_LIST(),
536 static void integratorcp_register_devices(void)
538 sysbus_register_dev("integrator_pic", sizeof(icp_pic_state
), icp_pic_init
);
539 sysbus_register_withprop(&core_info
);
542 device_init(integratorcp_register_devices
)