hw/mpcore.c

   1 /*
   2  * ARM MPCore internal peripheral emulation.
   3  *
   4  * Copyright (c) 2006-2007 CodeSourcery.
   5  * Written by Paul Brook
   6  *
   7  * This code is licenced under the GPL.
   8  */
   9
  10 #include "sysbus.h"
  11 #include "qemu-timer.h"
  12
  13 #define MPCORE_PRIV_BASE  0x10100000
  14 #define NCPU 4
  15 /* ??? The MPCore TRM says the on-chip controller has 224 external IRQ lines
  16    (+ 32 internal).  However my test chip only exposes/reports 32.
  17    More importantly Linux falls over if more than 32 are present!  */
  18 #define GIC_NIRQ 64
  19
  20 static inline int
  21 gic_get_current_cpu(void)
  22 {
  23   return cpu_single_env->cpu_index;
  24 }
  25
  26 #include "arm_gic.c"
  27
  28 /* MPCore private memory region.  */
  29
  30 typedef struct {
  31     uint32_t count;
  32     uint32_t load;
  33     uint32_t control;
  34     uint32_t status;
  35     uint32_t old_status;
  36     int64_t tick;
  37     QEMUTimer *timer;
  38     struct mpcore_priv_state *mpcore;
  39     int id; /* Encodes both timer/watchdog and CPU.  */
  40 } mpcore_timer_state;
  41
  42 typedef struct mpcore_priv_state {
  43     gic_state gic;
  44     uint32_t scu_control;
  45     int iomemtype;
  46     mpcore_timer_state timer[8];
  47 } mpcore_priv_state;
  48
  49 /* Per-CPU Timers.  */
  50
  51 static inline void mpcore_timer_update_irq(mpcore_timer_state *s)
  52 {
  53     if (s->status & ~s->old_status) {
  54         gic_set_pending_private(&s->mpcore->gic, s->id >> 1, 29 + (s->id & 1));
  55     }
  56     s->old_status = s->status;
  57 }
  58
  59 /* Return conversion factor from mpcore timer ticks to qemu timer ticks.  */
  60 static inline uint32_t mpcore_timer_scale(mpcore_timer_state *s)
  61 {
  62     return (((s->control >> 8) & 0xff) + 1) * 10;
  63 }
  64
  65 static void mpcore_timer_reload(mpcore_timer_state *s, int restart)
  66 {
  67     if (s->count == 0)
  68         return;
  69     if (restart)
  70         s->tick = qemu_get_clock(vm_clock);
  71     s->tick += (int64_t)s->count * mpcore_timer_scale(s);
  72     qemu_mod_timer(s->timer, s->tick);
  73 }
  74
  75 static void mpcore_timer_tick(void *opaque)
  76 {
  77     mpcore_timer_state *s = (mpcore_timer_state *)opaque;
  78     s->status = 1;
  79     if (s->control & 2) {
  80         s->count = s->load;
  81         mpcore_timer_reload(s, 0);
  82     } else {
  83         s->count = 0;
  84     }
  85     mpcore_timer_update_irq(s);
  86 }
  87
  88 static uint32_t mpcore_timer_read(mpcore_timer_state *s, int offset)
  89 {
  90     int64_t val;
  91     switch (offset) {
  92     case 0: /* Load */
  93         return s->load;
  94         /* Fall through.  */
  95     case 4: /* Counter.  */
  96         if (((s->control & 1) == 0) || (s->count == 0))
  97             return 0;
  98         /* Slow and ugly, but hopefully won't happen too often.  */
  99         val = s->tick - qemu_get_clock(vm_clock);
 100         val /= mpcore_timer_scale(s);
 101         if (val < 0)
 102             val = 0;
 103         return val;
 104     case 8: /* Control.  */
 105         return s->control;
 106     case 12: /* Interrupt status.  */
 107         return s->status;
 108     default:
 109         return 0;
 110     }
 111 }
 112
 113 static void mpcore_timer_write(mpcore_timer_state *s, int offset,
 114                                uint32_t value)
 115 {
 116     int64_t old;
 117     switch (offset) {
 118     case 0: /* Load */
 119         s->load = value;
 120         /* Fall through.  */
 121     case 4: /* Counter.  */
 122         if ((s->control & 1) && s->count) {
 123             /* Cancel the previous timer.  */
 124             qemu_del_timer(s->timer);
 125         }
 126         s->count = value;
 127         if (s->control & 1) {
 128             mpcore_timer_reload(s, 1);
 129         }
 130         break;
 131     case 8: /* Control.  */
 132         old = s->control;
 133         s->control = value;
 134         if (((old & 1) == 0) && (value & 1)) {
 135             if (s->count == 0 && (s->control & 2))
 136                 s->count = s->load;
 137             mpcore_timer_reload(s, 1);
 138         }
 139         break;
 140     case 12: /* Interrupt status.  */
 141         s->status &= ~value;
 142         mpcore_timer_update_irq(s);
 143         break;
 144     }
 145 }
 146
 147 static void mpcore_timer_init(mpcore_priv_state *mpcore,
 148                               mpcore_timer_state *s, int id)
 149 {
 150     s->id = id;
 151     s->mpcore = mpcore;
 152     s->timer = qemu_new_timer(vm_clock, mpcore_timer_tick, s);
 153 }
 154
 155
 156 /* Per-CPU private memory mapped IO.  */
 157
 158 static uint32_t mpcore_priv_read(void *opaque, target_phys_addr_t offset)
 159 {
 160     mpcore_priv_state *s = (mpcore_priv_state *)opaque;
 161     int id;
 162     offset &= 0xfff;
 163     if (offset < 0x100) {
 164         /* SCU */
 165         switch (offset) {
 166         case 0x00: /* Control.  */
 167             return s->scu_control;
 168         case 0x04: /* Configuration.  */
 169             return 0xf3;
 170         case 0x08: /* CPU status.  */
 171             return 0;
 172         case 0x0c: /* Invalidate all.  */
 173             return 0;
 174         default:
 175             goto bad_reg;
 176         }
 177     } else if (offset < 0x600) {
 178         /* Interrupt controller.  */
 179         if (offset < 0x200) {
 180             id = gic_get_current_cpu();
 181         } else {
 182             id = (offset - 0x200) >> 8;
 183         }
 184         return gic_cpu_read(&s->gic, id, offset & 0xff);
 185     } else if (offset < 0xb00) {
 186         /* Timers.  */
 187         if (offset < 0x700) {
 188             id = gic_get_current_cpu();
 189         } else {
 190             id = (offset - 0x700) >> 8;
 191         }
 192         id <<= 1;
 193         if (offset & 0x20)
 194           id++;
 195         return mpcore_timer_read(&s->timer[id], offset & 0xf);
 196     }
 197 bad_reg:
 198     hw_error("mpcore_priv_read: Bad offset %x\n", (int)offset);
 199     return 0;
 200 }
 201
 202 static void mpcore_priv_write(void *opaque, target_phys_addr_t offset,
 203                           uint32_t value)
 204 {
 205     mpcore_priv_state *s = (mpcore_priv_state *)opaque;
 206     int id;
 207     offset &= 0xfff;
 208     if (offset < 0x100) {
 209         /* SCU */
 210         switch (offset) {
 211         case 0: /* Control register.  */
 212             s->scu_control = value & 1;
 213             break;
 214         case 0x0c: /* Invalidate all.  */
 215             /* This is a no-op as cache is not emulated.  */
 216             break;
 217         default:
 218             goto bad_reg;
 219         }
 220     } else if (offset < 0x600) {
 221         /* Interrupt controller.  */
 222         if (offset < 0x200) {
 223             id = gic_get_current_cpu();
 224         } else {
 225             id = (offset - 0x200) >> 8;
 226         }
 227         gic_cpu_write(&s->gic, id, offset & 0xff, value);
 228     } else if (offset < 0xb00) {
 229         /* Timers.  */
 230         if (offset < 0x700) {
 231             id = gic_get_current_cpu();
 232         } else {
 233             id = (offset - 0x700) >> 8;
 234         }
 235         id <<= 1;
 236         if (offset & 0x20)
 237           id++;
 238         mpcore_timer_write(&s->timer[id], offset & 0xf, value);
 239         return;
 240     }
 241     return;
 242 bad_reg:
 243     hw_error("mpcore_priv_read: Bad offset %x\n", (int)offset);
 244 }
 245
 246 static CPUReadMemoryFunc *mpcore_priv_readfn[] = {
 247    mpcore_priv_read,
 248    mpcore_priv_read,
 249    mpcore_priv_read
 250 };
 251
 252 static CPUWriteMemoryFunc *mpcore_priv_writefn[] = {
 253    mpcore_priv_write,
 254    mpcore_priv_write,
 255    mpcore_priv_write
 256 };
 257
 258 static void mpcore_priv_map(SysBusDevice *dev, target_phys_addr_t base)
 259 {
 260     mpcore_priv_state *s = FROM_SYSBUSGIC(mpcore_priv_state, dev);
 261     cpu_register_physical_memory(base, 0x1000, s->iomemtype);
 262     cpu_register_physical_memory(base + 0x1000, 0x1000, s->gic.iomemtype);
 263 }
 264
 265 static void mpcore_priv_init(SysBusDevice *dev)
 266 {
 267     mpcore_priv_state *s = FROM_SYSBUSGIC(mpcore_priv_state, dev);
 268     int i;
 269
 270     gic_init(&s->gic);
 271     s->iomemtype = cpu_register_io_memory(mpcore_priv_readfn,
 272                                           mpcore_priv_writefn, s);
 273     sysbus_init_mmio_cb(dev, 0x2000, mpcore_priv_map);
 274     for (i = 0; i < 8; i++) {
 275         mpcore_timer_init(s, &s->timer[i], i);
 276     }
 277 }
 278
 279 /* Dummy PIC to route IRQ lines.  The baseboard has 4 independent IRQ
 280    controllers.  The output of these, plus some of the raw input lines
 281    are fed into a single SMP-aware interrupt controller on the CPU.  */
 282 typedef struct {
 283     SysBusDevice busdev;
 284     qemu_irq cpuic[32];
 285     qemu_irq rvic[4][64];
 286 } mpcore_rirq_state;
 287
 288 /* Map baseboard IRQs onto CPU IRQ lines.  */
 289 static const int mpcore_irq_map[32] = {
 290     -1, -1, -1, -1,  1,  2, -1, -1,
 291     -1, -1,  6, -1,  4,  5, -1, -1,
 292     -1, 14, 15,  0,  7,  8, -1, -1,
 293     -1, -1, -1, -1,  9,  3, -1, -1,
 294 };
 295
 296 static void mpcore_rirq_set_irq(void *opaque, int irq, int level)
 297 {
 298     mpcore_rirq_state *s = (mpcore_rirq_state *)opaque;
 299     int i;
 300
 301     for (i = 0; i < 4; i++) {
 302         qemu_set_irq(s->rvic[i][irq], level);
 303     }
 304     if (irq < 32) {
 305         irq = mpcore_irq_map[irq];
 306         if (irq >= 0) {
 307             qemu_set_irq(s->cpuic[irq], level);
 308         }
 309     }
 310 }
 311
 312 static void realview_mpcore_init(SysBusDevice *dev)
 313 {
 314     mpcore_rirq_state *s = FROM_SYSBUS(mpcore_rirq_state, dev);
 315     DeviceState *gic;
 316     DeviceState *priv;
 317     int n;
 318     int i;
 319
 320     priv = sysbus_create_simple("arm11mpcore_priv", MPCORE_PRIV_BASE, NULL);
 321     sysbus_pass_irq(dev, sysbus_from_qdev(priv));
 322     for (i = 0; i < 32; i++) {
 323         s->cpuic[i] = qdev_get_gpio_in(priv, i);
 324     }
 325     /* ??? IRQ routing is hardcoded to "normal" mode.  */
 326     for (n = 0; n < 4; n++) {
 327         gic = sysbus_create_simple("realview_gic", 0x10040000 + n * 0x10000,
 328                                    s->cpuic[10 + n]);
 329         for (i = 0; i < 64; i++) {
 330             s->rvic[n][i] = qdev_get_gpio_in(gic, i);
 331         }
 332     }
 333     qdev_init_gpio_in(&dev->qdev, mpcore_rirq_set_irq, 64);
 334 }
 335
 336 static void mpcore_register_devices(void)
 337 {
 338     sysbus_register_dev("realview_mpcore", sizeof(mpcore_rirq_state),
 339                         realview_mpcore_init);
 340     sysbus_register_dev("arm11mpcore_priv", sizeof(mpcore_priv_state),
 341                         mpcore_priv_init);
 342 }
 343
 344 device_init(mpcore_register_devices)