bsd-user/qemu.h

   1 #ifndef QEMU_H
   2 #define QEMU_H
   3
   4 #include <signal.h>
   5 #include <string.h>
   6
   7 #include "cpu.h"
   8
   9 #undef DEBUG_REMAP
  10 #ifdef DEBUG_REMAP
  11 #include <stdlib.h>
  12 #endif /* DEBUG_REMAP */
  13
  14 #include "qemu-types.h"
  15
  16 enum BSDType {
  17     target_freebsd,
  18     target_netbsd,
  19     target_openbsd,
  20 };
  21 extern enum BSDType bsd_type;
  22
  23 #include "syscall_defs.h"
  24 #include "syscall.h"
  25 #include "target_signal.h"
  26 #include "gdbstub.h"
  27
  28 #if defined(CONFIG_USE_NPTL)
  29 #define THREAD __thread
  30 #else
  31 #define THREAD
  32 #endif
  33
  34 /* This struct is used to hold certain information about the image.
  35  * Basically, it replicates in user space what would be certain
  36  * task_struct fields in the kernel
  37  */
  38 struct image_info {
  39     abi_ulong load_addr;
  40     abi_ulong start_code;
  41     abi_ulong end_code;
  42     abi_ulong start_data;
  43     abi_ulong end_data;
  44     abi_ulong start_brk;
  45     abi_ulong brk;
  46     abi_ulong start_mmap;
  47     abi_ulong mmap;
  48     abi_ulong rss;
  49     abi_ulong start_stack;
  50     abi_ulong entry;
  51     abi_ulong code_offset;
  52     abi_ulong data_offset;
  53     int       personality;
  54 };
  55
  56 #define MAX_SIGQUEUE_SIZE 1024
  57
  58 struct sigqueue {
  59     struct sigqueue *next;
  60     //target_siginfo_t info;
  61 };
  62
  63 struct emulated_sigtable {
  64     int pending; /* true if signal is pending */
  65     struct sigqueue *first;
  66     struct sigqueue info; /* in order to always have memory for the
  67                              first signal, we put it here */
  68 };
  69
  70 /* NOTE: we force a big alignment so that the stack stored after is
  71    aligned too */
  72 typedef struct TaskState {
  73     struct TaskState *next;
  74     int used; /* non zero if used */
  75     struct image_info *info;
  76
  77     struct emulated_sigtable sigtab[TARGET_NSIG];
  78     struct sigqueue sigqueue_table[MAX_SIGQUEUE_SIZE]; /* siginfo queue */
  79     struct sigqueue *first_free; /* first free siginfo queue entry */
  80     int signal_pending; /* non zero if a signal may be pending */
  81
  82     uint8_t stack[0];
  83 } __attribute__((aligned(16))) TaskState;
  84
  85 void init_task_state(TaskState *ts);
  86 extern const char *qemu_uname_release;
  87 #if defined(CONFIG_USE_GUEST_BASE)
  88 extern unsigned long mmap_min_addr;
  89 #endif
  90
  91 /* ??? See if we can avoid exposing so much of the loader internals.  */
  92 /*
  93  * MAX_ARG_PAGES defines the number of pages allocated for arguments
  94  * and envelope for the new program. 32 should suffice, this gives
  95  * a maximum env+arg of 128kB w/4KB pages!
  96  */
  97 #define MAX_ARG_PAGES 32
  98
  99 /*
 100  * This structure is used to hold the arguments that are
 101  * used when loading binaries.
 102  */
 103 struct linux_binprm {
 104         char buf[128];
 105         void *page[MAX_ARG_PAGES];
 106         abi_ulong p;
 107         int fd;
 108         int e_uid, e_gid;
 109         int argc, envc;
 110         char **argv;
 111         char **envp;
 112         char * filename;        /* Name of binary */
 113 };
 114
 115 void do_init_thread(struct target_pt_regs *regs, struct image_info *infop);
 116 abi_ulong loader_build_argptr(int envc, int argc, abi_ulong sp,
 117                               abi_ulong stringp, int push_ptr);
 118 int loader_exec(const char * filename, char ** argv, char ** envp,
 119              struct target_pt_regs * regs, struct image_info *infop);
 120
 121 int load_elf_binary(struct linux_binprm * bprm, struct target_pt_regs * regs,
 122                     struct image_info * info);
 123 int load_flt_binary(struct linux_binprm * bprm, struct target_pt_regs * regs,
 124                     struct image_info * info);
 125
 126 abi_long memcpy_to_target(abi_ulong dest, const void *src,
 127                           unsigned long len);
 128 void target_set_brk(abi_ulong new_brk);
 129 abi_long do_brk(abi_ulong new_brk);
 130 void syscall_init(void);
 131 abi_long do_freebsd_syscall(void *cpu_env, int num, abi_long arg1,
 132                             abi_long arg2, abi_long arg3, abi_long arg4,
 133                             abi_long arg5, abi_long arg6, abi_long arg7,
 134                             abi_long arg8);
 135 abi_long do_netbsd_syscall(void *cpu_env, int num, abi_long arg1,
 136                            abi_long arg2, abi_long arg3, abi_long arg4,
 137                            abi_long arg5, abi_long arg6);
 138 abi_long do_openbsd_syscall(void *cpu_env, int num, abi_long arg1,
 139                             abi_long arg2, abi_long arg3, abi_long arg4,
 140                             abi_long arg5, abi_long arg6);
 141 void gemu_log(const char *fmt, ...) GCC_FMT_ATTR(1, 2);
 142 extern THREAD CPUArchState *thread_env;
 143 void cpu_loop(CPUArchState *env);
 144 char *target_strerror(int err);
 145 int get_osversion(void);
 146 void fork_start(void);
 147 void fork_end(int child);
 148
 149 #include "qemu-log.h"
 150
 151 /* strace.c */
 152 void
 153 print_freebsd_syscall(int num,
 154                       abi_long arg1, abi_long arg2, abi_long arg3,
 155                       abi_long arg4, abi_long arg5, abi_long arg6);
 156 void print_freebsd_syscall_ret(int num, abi_long ret);
 157 void
 158 print_netbsd_syscall(int num,
 159                      abi_long arg1, abi_long arg2, abi_long arg3,
 160                      abi_long arg4, abi_long arg5, abi_long arg6);
 161 void print_netbsd_syscall_ret(int num, abi_long ret);
 162 void
 163 print_openbsd_syscall(int num,
 164                       abi_long arg1, abi_long arg2, abi_long arg3,
 165                       abi_long arg4, abi_long arg5, abi_long arg6);
 166 void print_openbsd_syscall_ret(int num, abi_long ret);
 167 extern int do_strace;
 168
 169 /* signal.c */
 170 void process_pending_signals(CPUArchState *cpu_env);
 171 void signal_init(void);
 172 //int queue_signal(CPUArchState *env, int sig, target_siginfo_t *info);
 173 //void host_to_target_siginfo(target_siginfo_t *tinfo, const siginfo_t *info);
 174 //void target_to_host_siginfo(siginfo_t *info, const target_siginfo_t *tinfo);
 175 long do_sigreturn(CPUArchState *env);
 176 long do_rt_sigreturn(CPUArchState *env);
 177 abi_long do_sigaltstack(abi_ulong uss_addr, abi_ulong uoss_addr, abi_ulong sp);
 178
 179 /* mmap.c */
 180 int target_mprotect(abi_ulong start, abi_ulong len, int prot);
 181 abi_long target_mmap(abi_ulong start, abi_ulong len, int prot,
 182                      int flags, int fd, abi_ulong offset);
 183 int target_munmap(abi_ulong start, abi_ulong len);
 184 abi_long target_mremap(abi_ulong old_addr, abi_ulong old_size,
 185                        abi_ulong new_size, unsigned long flags,
 186                        abi_ulong new_addr);
 187 int target_msync(abi_ulong start, abi_ulong len, int flags);
 188 extern unsigned long last_brk;
 189 void mmap_lock(void);
 190 void mmap_unlock(void);
 191 void cpu_list_lock(void);
 192 void cpu_list_unlock(void);
 193 #if defined(CONFIG_USE_NPTL)
 194 void mmap_fork_start(void);
 195 void mmap_fork_end(int child);
 196 #endif
 197
 198 /* main.c */
 199 extern unsigned long x86_stack_size;
 200
 201 /* user access */
 202
 203 #define VERIFY_READ 0
 204 #define VERIFY_WRITE 1 /* implies read access */
 205
 206 static inline int access_ok(int type, abi_ulong addr, abi_ulong size)
 207 {
 208     return page_check_range((target_ulong)addr, size,
 209                             (type == VERIFY_READ) ? PAGE_READ : (PAGE_READ | PAGE_WRITE)) == 0;
 210 }
 211
 212 /* NOTE __get_user and __put_user use host pointers and don't check access. */
 213 /* These are usually used to access struct data members once the
 214  * struct has been locked - usually with lock_user_struct().
 215  */
 216 #define __put_user(x, hptr)\
 217 ({\
 218     int size = sizeof(*hptr);\
 219     switch(size) {\
 220     case 1:\
 221         *(uint8_t *)(hptr) = (uint8_t)(typeof(*hptr))(x);\
 222         break;\
 223     case 2:\
 224         *(uint16_t *)(hptr) = tswap16((typeof(*hptr))(x));\
 225         break;\
 226     case 4:\
 227         *(uint32_t *)(hptr) = tswap32((typeof(*hptr))(x));\
 228         break;\
 229     case 8:\
 230         *(uint64_t *)(hptr) = tswap64((typeof(*hptr))(x));\
 231         break;\
 232     default:\
 233         abort();\
 234     }\
 235     0;\
 236 })
 237
 238 #define __get_user(x, hptr) \
 239 ({\
 240     int size = sizeof(*hptr);\
 241     switch(size) {\
 242     case 1:\
 243         x = (typeof(*hptr))*(uint8_t *)(hptr);\
 244         break;\
 245     case 2:\
 246         x = (typeof(*hptr))tswap16(*(uint16_t *)(hptr));\
 247         break;\
 248     case 4:\
 249         x = (typeof(*hptr))tswap32(*(uint32_t *)(hptr));\
 250         break;\
 251     case 8:\
 252         x = (typeof(*hptr))tswap64(*(uint64_t *)(hptr));\
 253         break;\
 254     default:\
 255         /* avoid warning */\
 256         x = 0;\
 257         abort();\
 258     }\
 259     0;\
 260 })
 261
 262 /* put_user()/get_user() take a guest address and check access */
 263 /* These are usually used to access an atomic data type, such as an int,
 264  * that has been passed by address.  These internally perform locking
 265  * and unlocking on the data type.
 266  */
 267 #define put_user(x, gaddr, target_type)                                 \
 268 ({                                                                      \
 269     abi_ulong __gaddr = (gaddr);                                        \
 270     target_type *__hptr;                                                \
 271     abi_long __ret;                                                     \
 272     if ((__hptr = lock_user(VERIFY_WRITE, __gaddr, sizeof(target_type), 0))) { \
 273         __ret = __put_user((x), __hptr);                                \
 274         unlock_user(__hptr, __gaddr, sizeof(target_type));              \
 275     } else                                                              \
 276         __ret = -TARGET_EFAULT;                                         \
 277     __ret;                                                              \
 278 })
 279
 280 #define get_user(x, gaddr, target_type)                                 \
 281 ({                                                                      \
 282     abi_ulong __gaddr = (gaddr);                                        \
 283     target_type *__hptr;                                                \
 284     abi_long __ret;                                                     \
 285     if ((__hptr = lock_user(VERIFY_READ, __gaddr, sizeof(target_type), 1))) { \
 286         __ret = __get_user((x), __hptr);                                \
 287         unlock_user(__hptr, __gaddr, 0);                                \
 288     } else {                                                            \
 289         /* avoid warning */                                             \
 290         (x) = 0;                                                        \
 291         __ret = -TARGET_EFAULT;                                         \
 292     }                                                                   \
 293     __ret;                                                              \
 294 })
 295
 296 #define put_user_ual(x, gaddr) put_user((x), (gaddr), abi_ulong)
 297 #define put_user_sal(x, gaddr) put_user((x), (gaddr), abi_long)
 298 #define put_user_u64(x, gaddr) put_user((x), (gaddr), uint64_t)
 299 #define put_user_s64(x, gaddr) put_user((x), (gaddr), int64_t)
 300 #define put_user_u32(x, gaddr) put_user((x), (gaddr), uint32_t)
 301 #define put_user_s32(x, gaddr) put_user((x), (gaddr), int32_t)
 302 #define put_user_u16(x, gaddr) put_user((x), (gaddr), uint16_t)
 303 #define put_user_s16(x, gaddr) put_user((x), (gaddr), int16_t)
 304 #define put_user_u8(x, gaddr)  put_user((x), (gaddr), uint8_t)
 305 #define put_user_s8(x, gaddr)  put_user((x), (gaddr), int8_t)
 306
 307 #define get_user_ual(x, gaddr) get_user((x), (gaddr), abi_ulong)
 308 #define get_user_sal(x, gaddr) get_user((x), (gaddr), abi_long)
 309 #define get_user_u64(x, gaddr) get_user((x), (gaddr), uint64_t)
 310 #define get_user_s64(x, gaddr) get_user((x), (gaddr), int64_t)
 311 #define get_user_u32(x, gaddr) get_user((x), (gaddr), uint32_t)
 312 #define get_user_s32(x, gaddr) get_user((x), (gaddr), int32_t)
 313 #define get_user_u16(x, gaddr) get_user((x), (gaddr), uint16_t)
 314 #define get_user_s16(x, gaddr) get_user((x), (gaddr), int16_t)
 315 #define get_user_u8(x, gaddr)  get_user((x), (gaddr), uint8_t)
 316 #define get_user_s8(x, gaddr)  get_user((x), (gaddr), int8_t)
 317
 318 /* copy_from_user() and copy_to_user() are usually used to copy data
 319  * buffers between the target and host.  These internally perform
 320  * locking/unlocking of the memory.
 321  */
 322 abi_long copy_from_user(void *hptr, abi_ulong gaddr, size_t len);
 323 abi_long copy_to_user(abi_ulong gaddr, void *hptr, size_t len);
 324
 325 /* Functions for accessing guest memory.  The tget and tput functions
 326    read/write single values, byteswapping as necessary.  The lock_user
 327    gets a pointer to a contiguous area of guest memory, but does not perform
 328    and byteswapping.  lock_user may return either a pointer to the guest
 329    memory, or a temporary buffer.  */
 330
 331 /* Lock an area of guest memory into the host.  If copy is true then the
 332    host area will have the same contents as the guest.  */
 333 static inline void *lock_user(int type, abi_ulong guest_addr, long len, int copy)
 334 {
 335     if (!access_ok(type, guest_addr, len))
 336         return NULL;
 337 #ifdef DEBUG_REMAP
 338     {
 339         void *addr;
 340         addr = malloc(len);
 341         if (copy)
 342             memcpy(addr, g2h(guest_addr), len);
 343         else
 344             memset(addr, 0, len);
 345         return addr;
 346     }
 347 #else
 348     return g2h(guest_addr);
 349 #endif
 350 }
 351
 352 /* Unlock an area of guest memory.  The first LEN bytes must be
 353    flushed back to guest memory. host_ptr = NULL is explicitly
 354    allowed and does nothing. */
 355 static inline void unlock_user(void *host_ptr, abi_ulong guest_addr,
 356                                long len)
 357 {
 358
 359 #ifdef DEBUG_REMAP
 360     if (!host_ptr)
 361         return;
 362     if (host_ptr == g2h(guest_addr))
 363         return;
 364     if (len > 0)
 365         memcpy(g2h(guest_addr), host_ptr, len);
 366     free(host_ptr);
 367 #endif
 368 }
 369
 370 /* Return the length of a string in target memory or -TARGET_EFAULT if
 371    access error. */
 372 abi_long target_strlen(abi_ulong gaddr);
 373
 374 /* Like lock_user but for null terminated strings.  */
 375 static inline void *lock_user_string(abi_ulong guest_addr)
 376 {
 377     abi_long len;
 378     len = target_strlen(guest_addr);
 379     if (len < 0)
 380         return NULL;
 381     return lock_user(VERIFY_READ, guest_addr, (long)(len + 1), 1);
 382 }
 383
 384 /* Helper macros for locking/ulocking a target struct.  */
 385 #define lock_user_struct(type, host_ptr, guest_addr, copy)      \
 386     (host_ptr = lock_user(type, guest_addr, sizeof(*host_ptr), copy))
 387 #define unlock_user_struct(host_ptr, guest_addr, copy)          \
 388     unlock_user(host_ptr, guest_addr, (copy) ? sizeof(*host_ptr) : 0)
 389
 390 #if defined(CONFIG_USE_NPTL)
 391 #include <pthread.h>
 392 #endif
 393
 394 #endif /* QEMU_H */