hw/ide/ahci_internal.h

   1 /*
   2  * QEMU AHCI Emulation
   3  *
   4  * Copyright (c) 2010 qiaochong@loongson.cn
   5  * Copyright (c) 2010 Roland Elek <elek.roland@gmail.com>
   6  * Copyright (c) 2010 Sebastian Herbszt <herbszt@gmx.de>
   7  * Copyright (c) 2010 Alexander Graf <agraf@suse.de>
   8  *
   9  * This library is free software; you can redistribute it and/or
  10  * modify it under the terms of the GNU Lesser General Public
  11  * License as published by the Free Software Foundation; either
  12  * version 2.1 of the License, or (at your option) any later version.
  13  *
  14  * This library is distributed in the hope that it will be useful,
  15  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  17  * Lesser General Public License for more details.
  18  *
  19  * You should have received a copy of the GNU Lesser General Public
  20  * License along with this library; if not, see <http://www.gnu.org/licenses/>.
  21  *
  22  */
  23
  24 #ifndef HW_IDE_AHCI_INTERNAL_H
  25 #define HW_IDE_AHCI_INTERNAL_H
  26
  27 #include "hw/ide/ahci.h"
  28 #include "hw/ide/internal.h"
  29 #include "hw/pci/pci_device.h"
  30
  31 #define AHCI_MEM_BAR_SIZE         0x1000
  32 #define AHCI_MAX_PORTS            32
  33 #define AHCI_MAX_SG               168 /* hardware max is 64K */
  34 #define AHCI_DMA_BOUNDARY         0xffffffff
  35 #define AHCI_USE_CLUSTERING       0
  36 #define AHCI_MAX_CMDS             32
  37 #define AHCI_CMD_SZ               32
  38 #define AHCI_CMD_SLOT_SZ          (AHCI_MAX_CMDS * AHCI_CMD_SZ)
  39 #define AHCI_RX_FIS_SZ            256
  40 #define AHCI_CMD_TBL_CDB          0x40
  41 #define AHCI_CMD_TBL_HDR_SZ       0x80
  42 #define AHCI_CMD_TBL_SZ           (AHCI_CMD_TBL_HDR_SZ + (AHCI_MAX_SG * 16))
  43 #define AHCI_CMD_TBL_AR_SZ        (AHCI_CMD_TBL_SZ * AHCI_MAX_CMDS)
  44 #define AHCI_PORT_PRIV_DMA_SZ     (AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_AR_SZ + \
  45                                    AHCI_RX_FIS_SZ)
  46
  47 #define AHCI_IRQ_ON_SG            (1U << 31)
  48 #define AHCI_CMD_ATAPI            (1 << 5)
  49 #define AHCI_CMD_WRITE            (1 << 6)
  50 #define AHCI_CMD_PREFETCH         (1 << 7)
  51 #define AHCI_CMD_RESET            (1 << 8)
  52 #define AHCI_CMD_CLR_BUSY         (1 << 10)
  53
  54 #define RX_FIS_D2H_REG            0x40 /* offset of D2H Register FIS data */
  55 #define RX_FIS_SDB                0x58 /* offset of SDB FIS data */
  56 #define RX_FIS_UNK                0x60 /* offset of Unknown FIS data */
  57
  58 /* global controller registers */
  59 enum AHCIHostReg {
  60     AHCI_HOST_REG_CAP        = 0,  /* CAP: host capabilities */
  61     AHCI_HOST_REG_CTL        = 1,  /* GHC: global host control */
  62     AHCI_HOST_REG_IRQ_STAT   = 2,  /* IS: interrupt status */
  63     AHCI_HOST_REG_PORTS_IMPL = 3,  /* PI: bitmap of implemented ports */
  64     AHCI_HOST_REG_VERSION    = 4,  /* VS: AHCI spec. version compliancy */
  65     AHCI_HOST_REG_CCC_CTL    = 5,  /* CCC_CTL: CCC Control */
  66     AHCI_HOST_REG_CCC_PORTS  = 6,  /* CCC_PORTS: CCC Ports */
  67     AHCI_HOST_REG_EM_LOC     = 7,  /* EM_LOC: Enclosure Mgmt Location */
  68     AHCI_HOST_REG_EM_CTL     = 8,  /* EM_CTL: Enclosure Mgmt Control */
  69     AHCI_HOST_REG_CAP2       = 9,  /* CAP2: host capabilities, extended */
  70     AHCI_HOST_REG_BOHC       = 10, /* BOHC: firmare/os handoff ctrl & status */
  71     AHCI_HOST_REG__COUNT     = 11
  72 };
  73
  74 /* HOST_CTL bits */
  75 #define HOST_CTL_RESET            (1 << 0)  /* reset controller; self-clear */
  76 #define HOST_CTL_IRQ_EN           (1 << 1)  /* global IRQ enable */
  77 #define HOST_CTL_AHCI_EN          (1U << 31) /* AHCI enabled */
  78
  79 /* HOST_CAP bits */
  80 #define HOST_CAP_SSC              (1 << 14) /* Slumber capable */
  81 #define HOST_CAP_AHCI             (1 << 18) /* AHCI only */
  82 #define HOST_CAP_CLO              (1 << 24) /* Command List Override support */
  83 #define HOST_CAP_SSS              (1 << 27) /* Staggered Spin-up */
  84 #define HOST_CAP_NCQ              (1 << 30) /* Native Command Queueing */
  85 #define HOST_CAP_64               (1U << 31) /* PCI DAC (64-bit DMA) support */
  86
  87 /* registers for each SATA port */
  88 enum AHCIPortReg {
  89     AHCI_PORT_REG_LST_ADDR    = 0, /* PxCLB: command list DMA addr */
  90     AHCI_PORT_REG_LST_ADDR_HI = 1, /* PxCLBU: command list DMA addr hi */
  91     AHCI_PORT_REG_FIS_ADDR    = 2, /* PxFB: FIS rx buf addr */
  92     AHCI_PORT_REG_FIS_ADDR_HI = 3, /* PxFBU: FIX rx buf addr hi */
  93     AHCI_PORT_REG_IRQ_STAT    = 4, /* PxIS: interrupt status */
  94     AHCI_PORT_REG_IRQ_MASK    = 5, /* PxIE: interrupt enable/disable mask */
  95     AHCI_PORT_REG_CMD         = 6, /* PxCMD: port command */
  96     /* RESERVED */
  97     AHCI_PORT_REG_TFDATA      = 8, /* PxTFD: taskfile data */
  98     AHCI_PORT_REG_SIG         = 9, /* PxSIG: device TF signature */
  99     AHCI_PORT_REG_SCR_STAT    = 10, /* PxSSTS: SATA phy register: SStatus */
 100     AHCI_PORT_REG_SCR_CTL     = 11, /* PxSCTL: SATA phy register: SControl */
 101     AHCI_PORT_REG_SCR_ERR     = 12, /* PxSERR: SATA phy register: SError */
 102     AHCI_PORT_REG_SCR_ACT     = 13, /* PxSACT: SATA phy register: SActive */
 103     AHCI_PORT_REG_CMD_ISSUE   = 14, /* PxCI: command issue */
 104     AHCI_PORT_REG_SCR_NOTIF   = 15, /* PxSNTF: SATA phy register: SNotification */
 105     AHCI_PORT_REG_FIS_CTL     = 16, /* PxFBS: Port multiplier switching ctl */
 106     AHCI_PORT_REG_DEV_SLEEP   = 17, /* PxDEVSLP: device sleep control */
 107     /* RESERVED */
 108     AHCI_PORT_REG_VENDOR_1    = 28, /* PxVS: Vendor Specific */
 109     AHCI_PORT_REG_VENDOR_2    = 29,
 110     AHCI_PORT_REG_VENDOR_3    = 30,
 111     AHCI_PORT_REG_VENDOR_4    = 31,
 112     AHCI_PORT_REG__COUNT      = 32
 113 };
 114
 115 /* Port interrupt bit descriptors */
 116 enum AHCIPortIRQ {
 117     AHCI_PORT_IRQ_BIT_DHRS = 0,
 118     AHCI_PORT_IRQ_BIT_PSS  = 1,
 119     AHCI_PORT_IRQ_BIT_DSS  = 2,
 120     AHCI_PORT_IRQ_BIT_SDBS = 3,
 121     AHCI_PORT_IRQ_BIT_UFS  = 4,
 122     AHCI_PORT_IRQ_BIT_DPS  = 5,
 123     AHCI_PORT_IRQ_BIT_PCS  = 6,
 124     AHCI_PORT_IRQ_BIT_DMPS = 7,
 125     /* RESERVED */
 126     AHCI_PORT_IRQ_BIT_PRCS = 22,
 127     AHCI_PORT_IRQ_BIT_IPMS = 23,
 128     AHCI_PORT_IRQ_BIT_OFS  = 24,
 129     /* RESERVED */
 130     AHCI_PORT_IRQ_BIT_INFS = 26,
 131     AHCI_PORT_IRQ_BIT_IFS  = 27,
 132     AHCI_PORT_IRQ_BIT_HBDS = 28,
 133     AHCI_PORT_IRQ_BIT_HBFS = 29,
 134     AHCI_PORT_IRQ_BIT_TFES = 30,
 135     AHCI_PORT_IRQ_BIT_CPDS = 31,
 136     AHCI_PORT_IRQ__COUNT   = 32
 137 };
 138
 139
 140 /* PORT_IRQ_{STAT,MASK} bits */
 141 #define PORT_IRQ_COLD_PRES        (1U << 31) /* cold presence detect */
 142 #define PORT_IRQ_TF_ERR           (1 << 30) /* task file error */
 143 #define PORT_IRQ_HBUS_ERR         (1 << 29) /* host bus fatal error */
 144 #define PORT_IRQ_HBUS_DATA_ERR    (1 << 28) /* host bus data error */
 145 #define PORT_IRQ_IF_ERR           (1 << 27) /* interface fatal error */
 146 #define PORT_IRQ_IF_NONFATAL      (1 << 26) /* interface non-fatal error */
 147                                             /* reserved */
 148 #define PORT_IRQ_OVERFLOW         (1 << 24) /* xfer exhausted available S/G */
 149 #define PORT_IRQ_BAD_PMP          (1 << 23) /* incorrect port multiplier */
 150 #define PORT_IRQ_PHYRDY           (1 << 22) /* PhyRdy changed */
 151                                             /* reserved */
 152 #define PORT_IRQ_DEV_ILCK         (1 << 7)  /* device interlock */
 153 #define PORT_IRQ_CONNECT          (1 << 6)  /* port connect change status */
 154 #define PORT_IRQ_SG_DONE          (1 << 5)  /* descriptor processed */
 155 #define PORT_IRQ_UNK_FIS          (1 << 4)  /* unknown FIS rx'd */
 156 #define PORT_IRQ_SDB_FIS          (1 << 3)  /* Set Device Bits FIS rx'd */
 157 #define PORT_IRQ_DMAS_FIS         (1 << 2)  /* DMA Setup FIS rx'd */
 158 #define PORT_IRQ_PIOS_FIS         (1 << 1)  /* PIO Setup FIS rx'd */
 159 #define PORT_IRQ_D2H_REG_FIS      (1 << 0)  /* D2H Register FIS rx'd */
 160
 161 #define PORT_IRQ_FREEZE           (PORT_IRQ_HBUS_ERR | PORT_IRQ_IF_ERR |   \
 162                                    PORT_IRQ_CONNECT | PORT_IRQ_PHYRDY |    \
 163                                    PORT_IRQ_UNK_FIS)
 164 #define PORT_IRQ_ERROR            (PORT_IRQ_FREEZE | PORT_IRQ_TF_ERR |     \
 165                                    PORT_IRQ_HBUS_DATA_ERR)
 166 #define DEF_PORT_IRQ              (PORT_IRQ_ERROR | PORT_IRQ_SG_DONE |     \
 167                                    PORT_IRQ_SDB_FIS | PORT_IRQ_DMAS_FIS |  \
 168                                    PORT_IRQ_PIOS_FIS | PORT_IRQ_D2H_REG_FIS)
 169
 170 /* PORT_CMD bits */
 171 #define PORT_CMD_ATAPI            (1 << 24) /* Device is ATAPI */
 172 #define PORT_CMD_LIST_ON          (1 << 15) /* cmd list DMA engine running */
 173 #define PORT_CMD_FIS_ON           (1 << 14) /* FIS DMA engine running */
 174 #define PORT_CMD_FIS_RX           (1 << 4) /* Enable FIS receive DMA engine */
 175 #define PORT_CMD_CLO              (1 << 3) /* Command list override */
 176 #define PORT_CMD_POWER_ON         (1 << 2) /* Power up device */
 177 #define PORT_CMD_SPIN_UP          (1 << 1) /* Spin up device */
 178 #define PORT_CMD_START            (1 << 0) /* Enable port DMA engine */
 179
 180 #define PORT_CMD_ICC_MASK        (0xfU << 28) /* i/f ICC state mask */
 181 #define PORT_CMD_ICC_ACTIVE       (0x1 << 28) /* Put i/f in active state */
 182 #define PORT_CMD_ICC_PARTIAL      (0x2 << 28) /* Put i/f in partial state */
 183 #define PORT_CMD_ICC_SLUMBER      (0x6 << 28) /* Put i/f in slumber state */
 184
 185 #define PORT_CMD_RO_MASK          0x007dffe0 /* Which CMD bits are read only? */
 186
 187 /* ap->flags bits */
 188 #define AHCI_FLAG_NO_NCQ                  (1 << 24)
 189 #define AHCI_FLAG_IGN_IRQ_IF_ERR          (1 << 25) /* ignore IRQ_IF_ERR */
 190 #define AHCI_FLAG_HONOR_PI                (1 << 26) /* honor PORTS_IMPL */
 191 #define AHCI_FLAG_IGN_SERR_INTERNAL       (1 << 27) /* ignore SERR_INTERNAL */
 192 #define AHCI_FLAG_32BIT_ONLY              (1 << 28) /* force 32bit */
 193
 194 #define ATA_SRST                          (1 << 2)  /* software reset */
 195
 196 #define STATE_RUN                         0
 197 #define STATE_RESET                       1
 198
 199 #define SATA_SCR_SSTATUS_DET_NODEV        0x0
 200 #define SATA_SCR_SSTATUS_DET_DEV_PRESENT_PHY_UP 0x3
 201
 202 #define SATA_SCR_SSTATUS_SPD_NODEV        0x00
 203 #define SATA_SCR_SSTATUS_SPD_GEN1         0x10
 204
 205 #define SATA_SCR_SSTATUS_IPM_NODEV        0x000
 206 #define SATA_SCR_SSTATUS_IPM_ACTIVE       0X100
 207
 208 #define AHCI_SCR_SCTL_DET                 0xf
 209
 210 #define SATA_FIS_TYPE_REGISTER_H2D        0x27
 211 #define   SATA_FIS_REG_H2D_UPDATE_COMMAND_REGISTER 0x80
 212 #define SATA_FIS_TYPE_REGISTER_D2H        0x34
 213 #define SATA_FIS_TYPE_PIO_SETUP           0x5f
 214 #define SATA_FIS_TYPE_SDB                 0xA1
 215
 216 #define AHCI_CMD_HDR_CMD_FIS_LEN           0x1f
 217 #define AHCI_CMD_HDR_PRDT_LEN              16
 218
 219 #define SATA_SIGNATURE_CDROM               0xeb140101
 220 #define SATA_SIGNATURE_DISK                0x00000101
 221
 222 #define AHCI_GENERIC_HOST_CONTROL_REGS_MAX_ADDR 0x2c
 223
 224 #define AHCI_PORT_REGS_START_ADDR          0x100
 225 #define AHCI_PORT_ADDR_OFFSET_MASK         0x7f
 226 #define AHCI_PORT_ADDR_OFFSET_LEN          0x80
 227
 228 #define AHCI_NUM_COMMAND_SLOTS             31
 229 #define AHCI_SUPPORTED_SPEED               20
 230 #define AHCI_SUPPORTED_SPEED_GEN1          1
 231 #define AHCI_VERSION_1_0                   0x10000
 232
 233 #define AHCI_PROGMODE_MAJOR_REV_1          1
 234
 235 #define AHCI_COMMAND_TABLE_ACMD            0x40
 236
 237 #define AHCI_PRDT_SIZE_MASK                0x3fffff
 238
 239 #define IDE_FEATURE_DMA                    1
 240
 241 #define READ_FPDMA_QUEUED                  0x60
 242 #define WRITE_FPDMA_QUEUED                 0x61
 243 #define NCQ_NON_DATA                       0x63
 244 #define RECEIVE_FPDMA_QUEUED               0x65
 245 #define SEND_FPDMA_QUEUED                  0x64
 246
 247 #define NCQ_FIS_FUA_MASK                   0x80
 248 #define NCQ_FIS_RARC_MASK                  0x01
 249
 250 #define RES_FIS_DSFIS                      0x00
 251 #define RES_FIS_PSFIS                      0x20
 252 #define RES_FIS_RFIS                       0x40
 253 #define RES_FIS_SDBFIS                     0x58
 254 #define RES_FIS_UFIS                       0x60
 255
 256 #define SATA_CAP_SIZE           0x8
 257 #define SATA_CAP_REV            0x2
 258 #define SATA_CAP_BAR            0x4
 259
 260 typedef struct AHCIPortRegs {
 261     uint32_t    lst_addr;
 262     uint32_t    lst_addr_hi;
 263     uint32_t    fis_addr;
 264     uint32_t    fis_addr_hi;
 265     uint32_t    irq_stat;
 266     uint32_t    irq_mask;
 267     uint32_t    cmd;
 268     uint32_t    unused0;
 269     uint32_t    tfdata;
 270     uint32_t    sig;
 271     uint32_t    scr_stat;
 272     uint32_t    scr_ctl;
 273     uint32_t    scr_err;
 274     uint32_t    scr_act;
 275     uint32_t    cmd_issue;
 276     uint32_t    reserved;
 277 } AHCIPortRegs;
 278
 279 typedef struct AHCICmdHdr {
 280     uint16_t    opts;
 281     uint16_t    prdtl;
 282     uint32_t    status;
 283     uint64_t    tbl_addr;
 284     uint32_t    reserved[4];
 285 } QEMU_PACKED AHCICmdHdr;
 286
 287 typedef struct AHCI_SG {
 288     uint64_t    addr;
 289     uint32_t    reserved;
 290     uint32_t    flags_size;
 291 } QEMU_PACKED AHCI_SG;
 292
 293 typedef struct NCQTransferState {
 294     AHCIDevice *drive;
 295     BlockAIOCB *aiocb;
 296     AHCICmdHdr *cmdh;
 297     QEMUSGList sglist;
 298     BlockAcctCookie acct;
 299     uint32_t sector_count;
 300     uint64_t lba;
 301     uint8_t tag;
 302     uint8_t cmd;
 303     uint8_t slot;
 304     bool used;
 305     bool halt;
 306 } NCQTransferState;
 307
 308 struct AHCIDevice {
 309     IDEDMA dma;
 310     IDEBus port;
 311     int port_no;
 312     uint32_t port_state;
 313     uint32_t finished;
 314     AHCIPortRegs port_regs;
 315     struct AHCIState *hba;
 316     QEMUBH *check_bh;
 317     uint8_t *lst;
 318     uint8_t *res_fis;
 319     bool done_first_drq;
 320     int32_t busy_slot;
 321     bool init_d2h_sent;
 322     AHCICmdHdr *cur_cmd;
 323     NCQTransferState ncq_tfs[AHCI_MAX_CMDS];
 324 };
 325
 326 struct AHCIPCIState {
 327     /*< private >*/
 328     PCIDevice parent_obj;
 329     /*< public >*/
 330
 331     AHCIState ahci;
 332 };
 333
 334 extern const VMStateDescription vmstate_ahci;
 335
 336 #define VMSTATE_AHCI(_field, _state) {                               \
 337     .name       = (stringify(_field)),                               \
 338     .size       = sizeof(AHCIState),                                 \
 339     .vmsd       = &vmstate_ahci,                                     \
 340     .flags      = VMS_STRUCT,                                        \
 341     .offset     = vmstate_offset_value(_state, _field, AHCIState),   \
 342 }
 343
 344 /**
 345  * NCQFrame is the same as a Register H2D FIS (described in SATA 3.2),
 346  * but some fields have been re-mapped and re-purposed, as seen in
 347  * SATA 3.2 section 13.6.4.1 ("READ FPDMA QUEUED")
 348  *
 349  * cmd_fis[3], feature 7:0, becomes sector count 7:0.
 350  * cmd_fis[7], device 7:0, uses bit 7 as the Force Unit Access bit.
 351  * cmd_fis[11], feature 15:8, becomes sector count 15:8.
 352  * cmd_fis[12], count 7:0, becomes the NCQ TAG (7:3) and RARC bit (0)
 353  * cmd_fis[13], count 15:8, becomes the priority value (7:6)
 354  * bytes 16-19 become an le32 "auxiliary" field.
 355  */
 356 typedef struct NCQFrame {
 357     uint8_t fis_type;
 358     uint8_t c;
 359     uint8_t command;
 360     uint8_t sector_count_low;  /* (feature 7:0) */
 361     uint8_t lba0;
 362     uint8_t lba1;
 363     uint8_t lba2;
 364     uint8_t fua;               /* (device 7:0) */
 365     uint8_t lba3;
 366     uint8_t lba4;
 367     uint8_t lba5;
 368     uint8_t sector_count_high; /* (feature 15:8) */
 369     uint8_t tag;               /* (count 0:7) */
 370     uint8_t prio;              /* (count 15:8) */
 371     uint8_t icc;
 372     uint8_t control;
 373     uint8_t aux0;
 374     uint8_t aux1;
 375     uint8_t aux2;
 376     uint8_t aux3;
 377 } QEMU_PACKED NCQFrame;
 378
 379 typedef struct SDBFIS {
 380     uint8_t type;
 381     uint8_t flags;
 382     uint8_t status;
 383     uint8_t error;
 384     uint32_t payload;
 385 } QEMU_PACKED SDBFIS;
 386
 387 void ahci_realize(AHCIState *s, DeviceState *qdev, AddressSpace *as, int ports);
 388 void ahci_init(AHCIState *s, DeviceState *qdev);
 389 void ahci_uninit(AHCIState *s);
 390
 391 void ahci_reset(AHCIState *s);
 392
 393 #endif /* HW_IDE_AHCI_INTERNAL_H */