spapr: add rtas_st_buffer_direct() helper
[qemu.git] / hw / ide / via.c
blobe2da9ef71adceb593797d6e7c0c8f78d04e5c362
1 /*
2 * QEMU IDE Emulation: PCI VIA82C686B support.
4 * Copyright (c) 2003 Fabrice Bellard
5 * Copyright (c) 2006 Openedhand Ltd.
6 * Copyright (c) 2010 Huacai Chen <zltjiangshi@gmail.com>
8 * Permission is hereby granted, free of charge, to any person obtaining a copy
9 * of this software and associated documentation files (the "Software"), to deal
10 * in the Software without restriction, including without limitation the rights
11 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
12 * copies of the Software, and to permit persons to whom the Software is
13 * furnished to do so, subject to the following conditions:
15 * The above copyright notice and this permission notice shall be included in
16 * all copies or substantial portions of the Software.
18 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
19 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
20 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
21 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
22 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
23 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
24 * THE SOFTWARE.
26 #include <hw/hw.h>
27 #include <hw/i386/pc.h>
28 #include <hw/pci/pci.h>
29 #include <hw/isa/isa.h>
30 #include "sysemu/block-backend.h"
31 #include "sysemu/sysemu.h"
32 #include "sysemu/dma.h"
34 #include <hw/ide/pci.h>
36 static uint64_t bmdma_read(void *opaque, hwaddr addr,
37 unsigned size)
39 BMDMAState *bm = opaque;
40 uint32_t val;
42 if (size != 1) {
43 return ((uint64_t)1 << (size * 8)) - 1;
46 switch (addr & 3) {
47 case 0:
48 val = bm->cmd;
49 break;
50 case 2:
51 val = bm->status;
52 break;
53 default:
54 val = 0xff;
55 break;
57 #ifdef DEBUG_IDE
58 printf("bmdma: readb 0x%02x : 0x%02x\n", addr, val);
59 #endif
60 return val;
63 static void bmdma_write(void *opaque, hwaddr addr,
64 uint64_t val, unsigned size)
66 BMDMAState *bm = opaque;
68 if (size != 1) {
69 return;
72 #ifdef DEBUG_IDE
73 printf("bmdma: writeb 0x%02x : 0x%02x\n", addr, val);
74 #endif
75 switch (addr & 3) {
76 case 0:
77 bmdma_cmd_writeb(bm, val);
78 break;
79 case 2:
80 bm->status = (val & 0x60) | (bm->status & 1) | (bm->status & ~val & 0x06);
81 break;
82 default:;
86 static const MemoryRegionOps via_bmdma_ops = {
87 .read = bmdma_read,
88 .write = bmdma_write,
91 static void bmdma_setup_bar(PCIIDEState *d)
93 int i;
95 memory_region_init(&d->bmdma_bar, OBJECT(d), "via-bmdma-container", 16);
96 for(i = 0;i < 2; i++) {
97 BMDMAState *bm = &d->bmdma[i];
99 memory_region_init_io(&bm->extra_io, OBJECT(d), &via_bmdma_ops, bm,
100 "via-bmdma", 4);
101 memory_region_add_subregion(&d->bmdma_bar, i * 8, &bm->extra_io);
102 memory_region_init_io(&bm->addr_ioport, OBJECT(d),
103 &bmdma_addr_ioport_ops, bm, "bmdma", 4);
104 memory_region_add_subregion(&d->bmdma_bar, i * 8 + 4, &bm->addr_ioport);
108 static void via_reset(void *opaque)
110 PCIIDEState *d = opaque;
111 PCIDevice *pd = PCI_DEVICE(d);
112 uint8_t *pci_conf = pd->config;
113 int i;
115 for (i = 0; i < 2; i++) {
116 ide_bus_reset(&d->bus[i]);
119 pci_set_word(pci_conf + PCI_COMMAND, PCI_COMMAND_WAIT);
120 pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_FAST_BACK |
121 PCI_STATUS_DEVSEL_MEDIUM);
123 pci_set_long(pci_conf + PCI_BASE_ADDRESS_0, 0x000001f0);
124 pci_set_long(pci_conf + PCI_BASE_ADDRESS_1, 0x000003f4);
125 pci_set_long(pci_conf + PCI_BASE_ADDRESS_2, 0x00000170);
126 pci_set_long(pci_conf + PCI_BASE_ADDRESS_3, 0x00000374);
127 pci_set_long(pci_conf + PCI_BASE_ADDRESS_4, 0x0000cc01); /* BMIBA: 20-23h */
128 pci_set_long(pci_conf + PCI_INTERRUPT_LINE, 0x0000010e);
130 /* IDE chip enable, IDE configuration 1/2, IDE FIFO Configuration*/
131 pci_set_long(pci_conf + 0x40, 0x0a090600);
132 /* IDE misc configuration 1/2/3 */
133 pci_set_long(pci_conf + 0x44, 0x00c00068);
134 /* IDE Timing control */
135 pci_set_long(pci_conf + 0x48, 0xa8a8a8a8);
136 /* IDE Address Setup Time */
137 pci_set_long(pci_conf + 0x4c, 0x000000ff);
138 /* UltraDMA Extended Timing Control*/
139 pci_set_long(pci_conf + 0x50, 0x07070707);
140 /* UltraDMA FIFO Control */
141 pci_set_long(pci_conf + 0x54, 0x00000004);
142 /* IDE primary sector size */
143 pci_set_long(pci_conf + 0x60, 0x00000200);
144 /* IDE secondary sector size */
145 pci_set_long(pci_conf + 0x68, 0x00000200);
146 /* PCI PM Block */
147 pci_set_long(pci_conf + 0xc0, 0x00020001);
150 static void vt82c686b_init_ports(PCIIDEState *d) {
151 static const struct {
152 int iobase;
153 int iobase2;
154 int isairq;
155 } port_info[] = {
156 {0x1f0, 0x3f6, 14},
157 {0x170, 0x376, 15},
159 int i;
161 for (i = 0; i < 2; i++) {
162 ide_bus_new(&d->bus[i], sizeof(d->bus[i]), DEVICE(d), i, 2);
163 ide_init_ioport(&d->bus[i], NULL, port_info[i].iobase,
164 port_info[i].iobase2);
165 ide_init2(&d->bus[i], isa_get_irq(NULL, port_info[i].isairq));
167 bmdma_init(&d->bus[i], &d->bmdma[i], d);
168 d->bmdma[i].bus = &d->bus[i];
169 ide_register_restart_cb(&d->bus[i]);
173 /* via ide func */
174 static void vt82c686b_ide_realize(PCIDevice *dev, Error **errp)
176 PCIIDEState *d = PCI_IDE(dev);
177 uint8_t *pci_conf = dev->config;
179 pci_config_set_prog_interface(pci_conf, 0x8a); /* legacy ATA mode */
180 pci_set_long(pci_conf + PCI_CAPABILITY_LIST, 0x000000c0);
182 qemu_register_reset(via_reset, d);
183 bmdma_setup_bar(d);
184 pci_register_bar(dev, 4, PCI_BASE_ADDRESS_SPACE_IO, &d->bmdma_bar);
186 vmstate_register(DEVICE(dev), 0, &vmstate_ide_pci, d);
188 vt82c686b_init_ports(d);
191 static void vt82c686b_ide_exitfn(PCIDevice *dev)
193 PCIIDEState *d = PCI_IDE(dev);
194 unsigned i;
196 for (i = 0; i < 2; ++i) {
197 memory_region_del_subregion(&d->bmdma_bar, &d->bmdma[i].extra_io);
198 memory_region_del_subregion(&d->bmdma_bar, &d->bmdma[i].addr_ioport);
202 void vt82c686b_ide_init(PCIBus *bus, DriveInfo **hd_table, int devfn)
204 PCIDevice *dev;
206 dev = pci_create_simple(bus, devfn, "via-ide");
207 pci_ide_create_devs(dev, hd_table);
210 static void via_ide_class_init(ObjectClass *klass, void *data)
212 DeviceClass *dc = DEVICE_CLASS(klass);
213 PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
215 k->realize = vt82c686b_ide_realize;
216 k->exit = vt82c686b_ide_exitfn;
217 k->vendor_id = PCI_VENDOR_ID_VIA;
218 k->device_id = PCI_DEVICE_ID_VIA_IDE;
219 k->revision = 0x06;
220 k->class_id = PCI_CLASS_STORAGE_IDE;
221 set_bit(DEVICE_CATEGORY_STORAGE, dc->categories);
224 static const TypeInfo via_ide_info = {
225 .name = "via-ide",
226 .parent = TYPE_PCI_IDE,
227 .class_init = via_ide_class_init,
230 static void via_ide_register_types(void)
232 type_register_static(&via_ide_info);
235 type_init(via_ide_register_types)