2 * QEMU PC System Emulator
4 * Copyright (c) 2003-2004 Fabrice Bellard
6 * Permission is hereby granted, free of charge, to any person obtaining a copy
7 * of this software and associated documentation files (the "Software"), to deal
8 * in the Software without restriction, including without limitation the rights
9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10 * copies of the Software, and to permit persons to whom the Software is
11 * furnished to do so, subject to the following conditions:
13 * The above copyright notice and this permission notice shall be included in
14 * all copies or substantial portions of the Software.
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
25 #include "qemu/osdep.h"
26 #include "qemu/units.h"
27 #include "hw/i386/x86.h"
28 #include "hw/i386/pc.h"
29 #include "hw/char/serial.h"
30 #include "hw/char/parallel.h"
31 #include "hw/i386/apic.h"
32 #include "hw/i386/topology.h"
33 #include "hw/i386/fw_cfg.h"
34 #include "hw/i386/vmport.h"
35 #include "sysemu/cpus.h"
36 #include "hw/block/fdc.h"
38 #include "hw/pci/pci.h"
39 #include "hw/pci/pci_bus.h"
40 #include "hw/pci-bridge/pci_expander_bridge.h"
41 #include "hw/nvram/fw_cfg.h"
42 #include "hw/timer/hpet.h"
43 #include "hw/firmware/smbios.h"
44 #include "hw/loader.h"
46 #include "migration/vmstate.h"
47 #include "multiboot.h"
48 #include "hw/rtc/mc146818rtc.h"
49 #include "hw/intc/i8259.h"
50 #include "hw/dma/i8257.h"
51 #include "hw/timer/i8254.h"
52 #include "hw/input/i8042.h"
54 #include "hw/audio/pcspk.h"
55 #include "hw/pci/msi.h"
56 #include "hw/sysbus.h"
57 #include "sysemu/sysemu.h"
58 #include "sysemu/tcg.h"
59 #include "sysemu/numa.h"
60 #include "sysemu/kvm.h"
61 #include "sysemu/xen.h"
62 #include "sysemu/reset.h"
63 #include "sysemu/runstate.h"
64 #include "kvm/kvm_i386.h"
65 #include "hw/xen/xen.h"
66 #include "hw/xen/start_info.h"
67 #include "ui/qemu-spice.h"
68 #include "exec/memory.h"
69 #include "qemu/bitmap.h"
70 #include "qemu/config-file.h"
71 #include "qemu/error-report.h"
72 #include "qemu/option.h"
73 #include "qemu/cutils.h"
74 #include "hw/acpi/acpi.h"
75 #include "hw/acpi/cpu_hotplug.h"
76 #include "acpi-build.h"
77 #include "hw/mem/pc-dimm.h"
78 #include "hw/mem/nvdimm.h"
79 #include "hw/cxl/cxl.h"
80 #include "hw/cxl/cxl_host.h"
81 #include "qapi/error.h"
82 #include "qapi/qapi-visit-common.h"
83 #include "qapi/qapi-visit-machine.h"
84 #include "qapi/visitor.h"
85 #include "hw/core/cpu.h"
87 #include "hw/i386/intel_iommu.h"
88 #include "hw/net/ne2000-isa.h"
89 #include "standard-headers/asm-x86/bootparam.h"
90 #include "hw/virtio/virtio-iommu.h"
91 #include "hw/virtio/virtio-pmem-pci.h"
92 #include "hw/virtio/virtio-mem-pci.h"
93 #include "hw/mem/memory-device.h"
94 #include "sysemu/replay.h"
95 #include "target/i386/cpu.h"
96 #include "qapi/qmp/qerror.h"
97 #include "e820_memory_layout.h"
100 #include CONFIG_DEVICES
103 * Helper for setting model-id for CPU models that changed model-id
104 * depending on QEMU versions up to QEMU 2.4.
106 #define PC_CPU_MODEL_IDS(v) \
107 { "qemu32-" TYPE_X86_CPU, "model-id", "QEMU Virtual CPU version " v, },\
108 { "qemu64-" TYPE_X86_CPU, "model-id", "QEMU Virtual CPU version " v, },\
109 { "athlon-" TYPE_X86_CPU, "model-id", "QEMU Virtual CPU version " v, },
111 GlobalProperty pc_compat_7_1
[] = {};
112 const size_t pc_compat_7_1_len
= G_N_ELEMENTS(pc_compat_7_1
);
114 GlobalProperty pc_compat_7_0
[] = {};
115 const size_t pc_compat_7_0_len
= G_N_ELEMENTS(pc_compat_7_0
);
117 GlobalProperty pc_compat_6_2
[] = {
118 { "virtio-mem", "unplugged-inaccessible", "off" },
120 const size_t pc_compat_6_2_len
= G_N_ELEMENTS(pc_compat_6_2
);
122 GlobalProperty pc_compat_6_1
[] = {
123 { TYPE_X86_CPU
, "hv-version-id-build", "0x1bbc" },
124 { TYPE_X86_CPU
, "hv-version-id-major", "0x0006" },
125 { TYPE_X86_CPU
, "hv-version-id-minor", "0x0001" },
126 { "ICH9-LPC", "x-keep-pci-slot-hpc", "false" },
128 const size_t pc_compat_6_1_len
= G_N_ELEMENTS(pc_compat_6_1
);
130 GlobalProperty pc_compat_6_0
[] = {
131 { "qemu64" "-" TYPE_X86_CPU
, "family", "6" },
132 { "qemu64" "-" TYPE_X86_CPU
, "model", "6" },
133 { "qemu64" "-" TYPE_X86_CPU
, "stepping", "3" },
134 { TYPE_X86_CPU
, "x-vendor-cpuid-only", "off" },
135 { "ICH9-LPC", ACPI_PM_PROP_ACPI_PCIHP_BRIDGE
, "off" },
136 { "ICH9-LPC", "x-keep-pci-slot-hpc", "true" },
138 const size_t pc_compat_6_0_len
= G_N_ELEMENTS(pc_compat_6_0
);
140 GlobalProperty pc_compat_5_2
[] = {
141 { "ICH9-LPC", "x-smi-cpu-hotunplug", "off" },
143 const size_t pc_compat_5_2_len
= G_N_ELEMENTS(pc_compat_5_2
);
145 GlobalProperty pc_compat_5_1
[] = {
146 { "ICH9-LPC", "x-smi-cpu-hotplug", "off" },
147 { TYPE_X86_CPU
, "kvm-msi-ext-dest-id", "off" },
149 const size_t pc_compat_5_1_len
= G_N_ELEMENTS(pc_compat_5_1
);
151 GlobalProperty pc_compat_5_0
[] = {
153 const size_t pc_compat_5_0_len
= G_N_ELEMENTS(pc_compat_5_0
);
155 GlobalProperty pc_compat_4_2
[] = {
156 { "mch", "smbase-smram", "off" },
158 const size_t pc_compat_4_2_len
= G_N_ELEMENTS(pc_compat_4_2
);
160 GlobalProperty pc_compat_4_1
[] = {};
161 const size_t pc_compat_4_1_len
= G_N_ELEMENTS(pc_compat_4_1
);
163 GlobalProperty pc_compat_4_0
[] = {};
164 const size_t pc_compat_4_0_len
= G_N_ELEMENTS(pc_compat_4_0
);
166 GlobalProperty pc_compat_3_1
[] = {
167 { "intel-iommu", "dma-drain", "off" },
168 { "Opteron_G3" "-" TYPE_X86_CPU
, "rdtscp", "off" },
169 { "Opteron_G4" "-" TYPE_X86_CPU
, "rdtscp", "off" },
170 { "Opteron_G4" "-" TYPE_X86_CPU
, "npt", "off" },
171 { "Opteron_G4" "-" TYPE_X86_CPU
, "nrip-save", "off" },
172 { "Opteron_G5" "-" TYPE_X86_CPU
, "rdtscp", "off" },
173 { "Opteron_G5" "-" TYPE_X86_CPU
, "npt", "off" },
174 { "Opteron_G5" "-" TYPE_X86_CPU
, "nrip-save", "off" },
175 { "EPYC" "-" TYPE_X86_CPU
, "npt", "off" },
176 { "EPYC" "-" TYPE_X86_CPU
, "nrip-save", "off" },
177 { "EPYC-IBPB" "-" TYPE_X86_CPU
, "npt", "off" },
178 { "EPYC-IBPB" "-" TYPE_X86_CPU
, "nrip-save", "off" },
179 { "Skylake-Client" "-" TYPE_X86_CPU
, "mpx", "on" },
180 { "Skylake-Client-IBRS" "-" TYPE_X86_CPU
, "mpx", "on" },
181 { "Skylake-Server" "-" TYPE_X86_CPU
, "mpx", "on" },
182 { "Skylake-Server-IBRS" "-" TYPE_X86_CPU
, "mpx", "on" },
183 { "Cascadelake-Server" "-" TYPE_X86_CPU
, "mpx", "on" },
184 { "Icelake-Client" "-" TYPE_X86_CPU
, "mpx", "on" },
185 { "Icelake-Server" "-" TYPE_X86_CPU
, "mpx", "on" },
186 { "Cascadelake-Server" "-" TYPE_X86_CPU
, "stepping", "5" },
187 { TYPE_X86_CPU
, "x-intel-pt-auto-level", "off" },
189 const size_t pc_compat_3_1_len
= G_N_ELEMENTS(pc_compat_3_1
);
191 GlobalProperty pc_compat_3_0
[] = {
192 { TYPE_X86_CPU
, "x-hv-synic-kvm-only", "on" },
193 { "Skylake-Server" "-" TYPE_X86_CPU
, "pku", "off" },
194 { "Skylake-Server-IBRS" "-" TYPE_X86_CPU
, "pku", "off" },
196 const size_t pc_compat_3_0_len
= G_N_ELEMENTS(pc_compat_3_0
);
198 GlobalProperty pc_compat_2_12
[] = {
199 { TYPE_X86_CPU
, "legacy-cache", "on" },
200 { TYPE_X86_CPU
, "topoext", "off" },
201 { "EPYC-" TYPE_X86_CPU
, "xlevel", "0x8000000a" },
202 { "EPYC-IBPB-" TYPE_X86_CPU
, "xlevel", "0x8000000a" },
204 const size_t pc_compat_2_12_len
= G_N_ELEMENTS(pc_compat_2_12
);
206 GlobalProperty pc_compat_2_11
[] = {
207 { TYPE_X86_CPU
, "x-migrate-smi-count", "off" },
208 { "Skylake-Server" "-" TYPE_X86_CPU
, "clflushopt", "off" },
210 const size_t pc_compat_2_11_len
= G_N_ELEMENTS(pc_compat_2_11
);
212 GlobalProperty pc_compat_2_10
[] = {
213 { TYPE_X86_CPU
, "x-hv-max-vps", "0x40" },
214 { "i440FX-pcihost", "x-pci-hole64-fix", "off" },
215 { "q35-pcihost", "x-pci-hole64-fix", "off" },
217 const size_t pc_compat_2_10_len
= G_N_ELEMENTS(pc_compat_2_10
);
219 GlobalProperty pc_compat_2_9
[] = {
220 { "mch", "extended-tseg-mbytes", "0" },
222 const size_t pc_compat_2_9_len
= G_N_ELEMENTS(pc_compat_2_9
);
224 GlobalProperty pc_compat_2_8
[] = {
225 { TYPE_X86_CPU
, "tcg-cpuid", "off" },
226 { "kvmclock", "x-mach-use-reliable-get-clock", "off" },
227 { "ICH9-LPC", "x-smi-broadcast", "off" },
228 { TYPE_X86_CPU
, "vmware-cpuid-freq", "off" },
229 { "Haswell-" TYPE_X86_CPU
, "stepping", "1" },
231 const size_t pc_compat_2_8_len
= G_N_ELEMENTS(pc_compat_2_8
);
233 GlobalProperty pc_compat_2_7
[] = {
234 { TYPE_X86_CPU
, "l3-cache", "off" },
235 { TYPE_X86_CPU
, "full-cpuid-auto-level", "off" },
236 { "Opteron_G3" "-" TYPE_X86_CPU
, "family", "15" },
237 { "Opteron_G3" "-" TYPE_X86_CPU
, "model", "6" },
238 { "Opteron_G3" "-" TYPE_X86_CPU
, "stepping", "1" },
239 { "isa-pcspk", "migrate", "off" },
241 const size_t pc_compat_2_7_len
= G_N_ELEMENTS(pc_compat_2_7
);
243 GlobalProperty pc_compat_2_6
[] = {
244 { TYPE_X86_CPU
, "cpuid-0xb", "off" },
245 { "vmxnet3", "romfile", "" },
246 { TYPE_X86_CPU
, "fill-mtrr-mask", "off" },
247 { "apic-common", "legacy-instance-id", "on", }
249 const size_t pc_compat_2_6_len
= G_N_ELEMENTS(pc_compat_2_6
);
251 GlobalProperty pc_compat_2_5
[] = {};
252 const size_t pc_compat_2_5_len
= G_N_ELEMENTS(pc_compat_2_5
);
254 GlobalProperty pc_compat_2_4
[] = {
255 PC_CPU_MODEL_IDS("2.4.0")
256 { "Haswell-" TYPE_X86_CPU
, "abm", "off" },
257 { "Haswell-noTSX-" TYPE_X86_CPU
, "abm", "off" },
258 { "Broadwell-" TYPE_X86_CPU
, "abm", "off" },
259 { "Broadwell-noTSX-" TYPE_X86_CPU
, "abm", "off" },
260 { "host" "-" TYPE_X86_CPU
, "host-cache-info", "on" },
261 { TYPE_X86_CPU
, "check", "off" },
262 { "qemu64" "-" TYPE_X86_CPU
, "sse4a", "on" },
263 { "qemu64" "-" TYPE_X86_CPU
, "abm", "on" },
264 { "qemu64" "-" TYPE_X86_CPU
, "popcnt", "on" },
265 { "qemu32" "-" TYPE_X86_CPU
, "popcnt", "on" },
266 { "Opteron_G2" "-" TYPE_X86_CPU
, "rdtscp", "on" },
267 { "Opteron_G3" "-" TYPE_X86_CPU
, "rdtscp", "on" },
268 { "Opteron_G4" "-" TYPE_X86_CPU
, "rdtscp", "on" },
269 { "Opteron_G5" "-" TYPE_X86_CPU
, "rdtscp", "on", }
271 const size_t pc_compat_2_4_len
= G_N_ELEMENTS(pc_compat_2_4
);
273 GlobalProperty pc_compat_2_3
[] = {
274 PC_CPU_MODEL_IDS("2.3.0")
275 { TYPE_X86_CPU
, "arat", "off" },
276 { "qemu64" "-" TYPE_X86_CPU
, "min-level", "4" },
277 { "kvm64" "-" TYPE_X86_CPU
, "min-level", "5" },
278 { "pentium3" "-" TYPE_X86_CPU
, "min-level", "2" },
279 { "n270" "-" TYPE_X86_CPU
, "min-level", "5" },
280 { "Conroe" "-" TYPE_X86_CPU
, "min-level", "4" },
281 { "Penryn" "-" TYPE_X86_CPU
, "min-level", "4" },
282 { "Nehalem" "-" TYPE_X86_CPU
, "min-level", "4" },
283 { "n270" "-" TYPE_X86_CPU
, "min-xlevel", "0x8000000a" },
284 { "Penryn" "-" TYPE_X86_CPU
, "min-xlevel", "0x8000000a" },
285 { "Conroe" "-" TYPE_X86_CPU
, "min-xlevel", "0x8000000a" },
286 { "Nehalem" "-" TYPE_X86_CPU
, "min-xlevel", "0x8000000a" },
287 { "Westmere" "-" TYPE_X86_CPU
, "min-xlevel", "0x8000000a" },
288 { "SandyBridge" "-" TYPE_X86_CPU
, "min-xlevel", "0x8000000a" },
289 { "IvyBridge" "-" TYPE_X86_CPU
, "min-xlevel", "0x8000000a" },
290 { "Haswell" "-" TYPE_X86_CPU
, "min-xlevel", "0x8000000a" },
291 { "Haswell-noTSX" "-" TYPE_X86_CPU
, "min-xlevel", "0x8000000a" },
292 { "Broadwell" "-" TYPE_X86_CPU
, "min-xlevel", "0x8000000a" },
293 { "Broadwell-noTSX" "-" TYPE_X86_CPU
, "min-xlevel", "0x8000000a" },
294 { TYPE_X86_CPU
, "kvm-no-smi-migration", "on" },
296 const size_t pc_compat_2_3_len
= G_N_ELEMENTS(pc_compat_2_3
);
298 GlobalProperty pc_compat_2_2
[] = {
299 PC_CPU_MODEL_IDS("2.2.0")
300 { "kvm64" "-" TYPE_X86_CPU
, "vme", "off" },
301 { "kvm32" "-" TYPE_X86_CPU
, "vme", "off" },
302 { "Conroe" "-" TYPE_X86_CPU
, "vme", "off" },
303 { "Penryn" "-" TYPE_X86_CPU
, "vme", "off" },
304 { "Nehalem" "-" TYPE_X86_CPU
, "vme", "off" },
305 { "Westmere" "-" TYPE_X86_CPU
, "vme", "off" },
306 { "SandyBridge" "-" TYPE_X86_CPU
, "vme", "off" },
307 { "Haswell" "-" TYPE_X86_CPU
, "vme", "off" },
308 { "Broadwell" "-" TYPE_X86_CPU
, "vme", "off" },
309 { "Opteron_G1" "-" TYPE_X86_CPU
, "vme", "off" },
310 { "Opteron_G2" "-" TYPE_X86_CPU
, "vme", "off" },
311 { "Opteron_G3" "-" TYPE_X86_CPU
, "vme", "off" },
312 { "Opteron_G4" "-" TYPE_X86_CPU
, "vme", "off" },
313 { "Opteron_G5" "-" TYPE_X86_CPU
, "vme", "off" },
314 { "Haswell" "-" TYPE_X86_CPU
, "f16c", "off" },
315 { "Haswell" "-" TYPE_X86_CPU
, "rdrand", "off" },
316 { "Broadwell" "-" TYPE_X86_CPU
, "f16c", "off" },
317 { "Broadwell" "-" TYPE_X86_CPU
, "rdrand", "off" },
319 const size_t pc_compat_2_2_len
= G_N_ELEMENTS(pc_compat_2_2
);
321 GlobalProperty pc_compat_2_1
[] = {
322 PC_CPU_MODEL_IDS("2.1.0")
323 { "coreduo" "-" TYPE_X86_CPU
, "vmx", "on" },
324 { "core2duo" "-" TYPE_X86_CPU
, "vmx", "on" },
326 const size_t pc_compat_2_1_len
= G_N_ELEMENTS(pc_compat_2_1
);
328 GlobalProperty pc_compat_2_0
[] = {
329 PC_CPU_MODEL_IDS("2.0.0")
330 { "virtio-scsi-pci", "any_layout", "off" },
331 { "PIIX4_PM", "memory-hotplug-support", "off" },
332 { "apic", "version", "0x11" },
333 { "nec-usb-xhci", "superspeed-ports-first", "off" },
334 { "nec-usb-xhci", "force-pcie-endcap", "on" },
335 { "pci-serial", "prog_if", "0" },
336 { "pci-serial-2x", "prog_if", "0" },
337 { "pci-serial-4x", "prog_if", "0" },
338 { "virtio-net-pci", "guest_announce", "off" },
339 { "ICH9-LPC", "memory-hotplug-support", "off" },
341 const size_t pc_compat_2_0_len
= G_N_ELEMENTS(pc_compat_2_0
);
343 GlobalProperty pc_compat_1_7
[] = {
344 PC_CPU_MODEL_IDS("1.7.0")
345 { TYPE_USB_DEVICE
, "msos-desc", "no" },
346 { "PIIX4_PM", ACPI_PM_PROP_ACPI_PCIHP_BRIDGE
, "off" },
347 { "hpet", HPET_INTCAP
, "4" },
349 const size_t pc_compat_1_7_len
= G_N_ELEMENTS(pc_compat_1_7
);
351 GlobalProperty pc_compat_1_6
[] = {
352 PC_CPU_MODEL_IDS("1.6.0")
353 { "e1000", "mitigation", "off" },
354 { "qemu64-" TYPE_X86_CPU
, "model", "2" },
355 { "qemu32-" TYPE_X86_CPU
, "model", "3" },
356 { "i440FX-pcihost", "short_root_bus", "1" },
357 { "q35-pcihost", "short_root_bus", "1" },
359 const size_t pc_compat_1_6_len
= G_N_ELEMENTS(pc_compat_1_6
);
361 GlobalProperty pc_compat_1_5
[] = {
362 PC_CPU_MODEL_IDS("1.5.0")
363 { "Conroe-" TYPE_X86_CPU
, "model", "2" },
364 { "Conroe-" TYPE_X86_CPU
, "min-level", "2" },
365 { "Penryn-" TYPE_X86_CPU
, "model", "2" },
366 { "Penryn-" TYPE_X86_CPU
, "min-level", "2" },
367 { "Nehalem-" TYPE_X86_CPU
, "model", "2" },
368 { "Nehalem-" TYPE_X86_CPU
, "min-level", "2" },
369 { "virtio-net-pci", "any_layout", "off" },
370 { TYPE_X86_CPU
, "pmu", "on" },
371 { "i440FX-pcihost", "short_root_bus", "0" },
372 { "q35-pcihost", "short_root_bus", "0" },
374 const size_t pc_compat_1_5_len
= G_N_ELEMENTS(pc_compat_1_5
);
376 GlobalProperty pc_compat_1_4
[] = {
377 PC_CPU_MODEL_IDS("1.4.0")
378 { "scsi-hd", "discard_granularity", "0" },
379 { "scsi-cd", "discard_granularity", "0" },
380 { "ide-hd", "discard_granularity", "0" },
381 { "ide-cd", "discard_granularity", "0" },
382 { "virtio-blk-pci", "discard_granularity", "0" },
383 /* DEV_NVECTORS_UNSPECIFIED as a uint32_t string: */
384 { "virtio-serial-pci", "vectors", "0xFFFFFFFF" },
385 { "virtio-net-pci", "ctrl_guest_offloads", "off" },
386 { "e1000", "romfile", "pxe-e1000.rom" },
387 { "ne2k_pci", "romfile", "pxe-ne2k_pci.rom" },
388 { "pcnet", "romfile", "pxe-pcnet.rom" },
389 { "rtl8139", "romfile", "pxe-rtl8139.rom" },
390 { "virtio-net-pci", "romfile", "pxe-virtio.rom" },
391 { "486-" TYPE_X86_CPU
, "model", "0" },
392 { "n270" "-" TYPE_X86_CPU
, "movbe", "off" },
393 { "Westmere" "-" TYPE_X86_CPU
, "pclmulqdq", "off" },
395 const size_t pc_compat_1_4_len
= G_N_ELEMENTS(pc_compat_1_4
);
397 GSIState
*pc_gsi_create(qemu_irq
**irqs
, bool pci_enabled
)
401 s
= g_new0(GSIState
, 1);
402 if (kvm_ioapic_in_kernel()) {
403 kvm_pc_setup_irq_routing(pci_enabled
);
405 *irqs
= qemu_allocate_irqs(gsi_handler
, s
, GSI_NUM_PINS
);
410 static void ioport80_write(void *opaque
, hwaddr addr
, uint64_t data
,
415 static uint64_t ioport80_read(void *opaque
, hwaddr addr
, unsigned size
)
417 return 0xffffffffffffffffULL
;
420 /* MSDOS compatibility mode FPU exception support */
421 static void ioportF0_write(void *opaque
, hwaddr addr
, uint64_t data
,
429 static uint64_t ioportF0_read(void *opaque
, hwaddr addr
, unsigned size
)
431 return 0xffffffffffffffffULL
;
434 /* PC cmos mappings */
436 #define REG_EQUIPMENT_BYTE 0x14
438 static void cmos_init_hd(ISADevice
*s
, int type_ofs
, int info_ofs
,
439 int16_t cylinders
, int8_t heads
, int8_t sectors
)
441 rtc_set_memory(s
, type_ofs
, 47);
442 rtc_set_memory(s
, info_ofs
, cylinders
);
443 rtc_set_memory(s
, info_ofs
+ 1, cylinders
>> 8);
444 rtc_set_memory(s
, info_ofs
+ 2, heads
);
445 rtc_set_memory(s
, info_ofs
+ 3, 0xff);
446 rtc_set_memory(s
, info_ofs
+ 4, 0xff);
447 rtc_set_memory(s
, info_ofs
+ 5, 0xc0 | ((heads
> 8) << 3));
448 rtc_set_memory(s
, info_ofs
+ 6, cylinders
);
449 rtc_set_memory(s
, info_ofs
+ 7, cylinders
>> 8);
450 rtc_set_memory(s
, info_ofs
+ 8, sectors
);
453 /* convert boot_device letter to something recognizable by the bios */
454 static int boot_device2nibble(char boot_device
)
456 switch(boot_device
) {
459 return 0x01; /* floppy boot */
461 return 0x02; /* hard drive boot */
463 return 0x03; /* CD-ROM boot */
465 return 0x04; /* Network boot */
470 static void set_boot_dev(ISADevice
*s
, const char *boot_device
, Error
**errp
)
472 #define PC_MAX_BOOT_DEVICES 3
473 int nbds
, bds
[3] = { 0, };
476 nbds
= strlen(boot_device
);
477 if (nbds
> PC_MAX_BOOT_DEVICES
) {
478 error_setg(errp
, "Too many boot devices for PC");
481 for (i
= 0; i
< nbds
; i
++) {
482 bds
[i
] = boot_device2nibble(boot_device
[i
]);
484 error_setg(errp
, "Invalid boot device for PC: '%c'",
489 rtc_set_memory(s
, 0x3d, (bds
[1] << 4) | bds
[0]);
490 rtc_set_memory(s
, 0x38, (bds
[2] << 4) | (fd_bootchk
? 0x0 : 0x1));
493 static void pc_boot_set(void *opaque
, const char *boot_device
, Error
**errp
)
495 set_boot_dev(opaque
, boot_device
, errp
);
498 static void pc_cmos_init_floppy(ISADevice
*rtc_state
, ISADevice
*floppy
)
501 FloppyDriveType fd_type
[2] = { FLOPPY_DRIVE_TYPE_NONE
,
502 FLOPPY_DRIVE_TYPE_NONE
};
506 for (i
= 0; i
< 2; i
++) {
507 fd_type
[i
] = isa_fdc_get_drive_type(floppy
, i
);
510 val
= (cmos_get_fd_drive_type(fd_type
[0]) << 4) |
511 cmos_get_fd_drive_type(fd_type
[1]);
512 rtc_set_memory(rtc_state
, 0x10, val
);
514 val
= rtc_get_memory(rtc_state
, REG_EQUIPMENT_BYTE
);
516 if (fd_type
[0] != FLOPPY_DRIVE_TYPE_NONE
) {
519 if (fd_type
[1] != FLOPPY_DRIVE_TYPE_NONE
) {
526 val
|= 0x01; /* 1 drive, ready for boot */
529 val
|= 0x41; /* 2 drives, ready for boot */
532 rtc_set_memory(rtc_state
, REG_EQUIPMENT_BYTE
, val
);
535 typedef struct pc_cmos_init_late_arg
{
536 ISADevice
*rtc_state
;
538 } pc_cmos_init_late_arg
;
540 typedef struct check_fdc_state
{
545 static int check_fdc(Object
*obj
, void *opaque
)
547 CheckFdcState
*state
= opaque
;
550 Error
*local_err
= NULL
;
552 fdc
= object_dynamic_cast(obj
, TYPE_ISA_FDC
);
557 iobase
= object_property_get_uint(obj
, "iobase", &local_err
);
558 if (local_err
|| iobase
!= 0x3f0) {
559 error_free(local_err
);
564 state
->multiple
= true;
566 state
->floppy
= ISA_DEVICE(obj
);
571 static const char * const fdc_container_path
[] = {
572 "/unattached", "/peripheral", "/peripheral-anon"
576 * Locate the FDC at IO address 0x3f0, in order to configure the CMOS registers
579 static ISADevice
*pc_find_fdc0(void)
583 CheckFdcState state
= { 0 };
585 for (i
= 0; i
< ARRAY_SIZE(fdc_container_path
); i
++) {
586 container
= container_get(qdev_get_machine(), fdc_container_path
[i
]);
587 object_child_foreach(container
, check_fdc
, &state
);
590 if (state
.multiple
) {
591 warn_report("multiple floppy disk controllers with "
592 "iobase=0x3f0 have been found");
593 error_printf("the one being picked for CMOS setup might not reflect "
600 static void pc_cmos_init_late(void *opaque
)
602 pc_cmos_init_late_arg
*arg
= opaque
;
603 ISADevice
*s
= arg
->rtc_state
;
605 int8_t heads
, sectors
;
610 if (arg
->idebus
[0] && ide_get_geometry(arg
->idebus
[0], 0,
611 &cylinders
, &heads
, §ors
) >= 0) {
612 cmos_init_hd(s
, 0x19, 0x1b, cylinders
, heads
, sectors
);
615 if (arg
->idebus
[0] && ide_get_geometry(arg
->idebus
[0], 1,
616 &cylinders
, &heads
, §ors
) >= 0) {
617 cmos_init_hd(s
, 0x1a, 0x24, cylinders
, heads
, sectors
);
620 rtc_set_memory(s
, 0x12, val
);
623 for (i
= 0; i
< 4; i
++) {
624 /* NOTE: ide_get_geometry() returns the physical
625 geometry. It is always such that: 1 <= sects <= 63, 1
626 <= heads <= 16, 1 <= cylinders <= 16383. The BIOS
627 geometry can be different if a translation is done. */
628 if (arg
->idebus
[i
/ 2] &&
629 ide_get_geometry(arg
->idebus
[i
/ 2], i
% 2,
630 &cylinders
, &heads
, §ors
) >= 0) {
631 trans
= ide_get_bios_chs_trans(arg
->idebus
[i
/ 2], i
% 2) - 1;
632 assert((trans
& ~3) == 0);
633 val
|= trans
<< (i
* 2);
636 rtc_set_memory(s
, 0x39, val
);
638 pc_cmos_init_floppy(s
, pc_find_fdc0());
640 qemu_unregister_reset(pc_cmos_init_late
, opaque
);
643 void pc_cmos_init(PCMachineState
*pcms
,
644 BusState
*idebus0
, BusState
*idebus1
,
648 static pc_cmos_init_late_arg arg
;
649 X86MachineState
*x86ms
= X86_MACHINE(pcms
);
651 /* various important CMOS locations needed by PC/Bochs bios */
654 /* base memory (first MiB) */
655 val
= MIN(x86ms
->below_4g_mem_size
/ KiB
, 640);
656 rtc_set_memory(s
, 0x15, val
);
657 rtc_set_memory(s
, 0x16, val
>> 8);
658 /* extended memory (next 64MiB) */
659 if (x86ms
->below_4g_mem_size
> 1 * MiB
) {
660 val
= (x86ms
->below_4g_mem_size
- 1 * MiB
) / KiB
;
666 rtc_set_memory(s
, 0x17, val
);
667 rtc_set_memory(s
, 0x18, val
>> 8);
668 rtc_set_memory(s
, 0x30, val
);
669 rtc_set_memory(s
, 0x31, val
>> 8);
670 /* memory between 16MiB and 4GiB */
671 if (x86ms
->below_4g_mem_size
> 16 * MiB
) {
672 val
= (x86ms
->below_4g_mem_size
- 16 * MiB
) / (64 * KiB
);
678 rtc_set_memory(s
, 0x34, val
);
679 rtc_set_memory(s
, 0x35, val
>> 8);
680 /* memory above 4GiB */
681 val
= x86ms
->above_4g_mem_size
/ 65536;
682 rtc_set_memory(s
, 0x5b, val
);
683 rtc_set_memory(s
, 0x5c, val
>> 8);
684 rtc_set_memory(s
, 0x5d, val
>> 16);
686 object_property_add_link(OBJECT(pcms
), "rtc_state",
688 (Object
**)&x86ms
->rtc
,
689 object_property_allow_set_link
,
690 OBJ_PROP_LINK_STRONG
);
691 object_property_set_link(OBJECT(pcms
), "rtc_state", OBJECT(s
),
694 set_boot_dev(s
, MACHINE(pcms
)->boot_config
.order
, &error_fatal
);
697 val
|= 0x02; /* FPU is there */
698 val
|= 0x04; /* PS/2 mouse installed */
699 rtc_set_memory(s
, REG_EQUIPMENT_BYTE
, val
);
701 /* hard drives and FDC */
703 arg
.idebus
[0] = idebus0
;
704 arg
.idebus
[1] = idebus1
;
705 qemu_register_reset(pc_cmos_init_late
, &arg
);
708 static void handle_a20_line_change(void *opaque
, int irq
, int level
)
710 X86CPU
*cpu
= opaque
;
712 /* XXX: send to all CPUs ? */
713 /* XXX: add logic to handle multiple A20 line sources */
714 x86_cpu_set_a20(cpu
, level
);
717 #define NE2000_NB_MAX 6
719 static const int ne2000_io
[NE2000_NB_MAX
] = { 0x300, 0x320, 0x340, 0x360,
721 static const int ne2000_irq
[NE2000_NB_MAX
] = { 9, 10, 11, 3, 4, 5 };
723 static void pc_init_ne2k_isa(ISABus
*bus
, NICInfo
*nd
)
725 static int nb_ne2k
= 0;
727 if (nb_ne2k
== NE2000_NB_MAX
)
729 isa_ne2000_init(bus
, ne2000_io
[nb_ne2k
],
730 ne2000_irq
[nb_ne2k
], nd
);
734 void pc_acpi_smi_interrupt(void *opaque
, int irq
, int level
)
736 X86CPU
*cpu
= opaque
;
739 cpu_interrupt(CPU(cpu
), CPU_INTERRUPT_SMI
);
744 void pc_machine_done(Notifier
*notifier
, void *data
)
746 PCMachineState
*pcms
= container_of(notifier
,
747 PCMachineState
, machine_done
);
748 X86MachineState
*x86ms
= X86_MACHINE(pcms
);
750 cxl_hook_up_pxb_registers(pcms
->bus
, &pcms
->cxl_devices_state
,
753 if (pcms
->cxl_devices_state
.is_enabled
) {
754 cxl_fmws_link_targets(&pcms
->cxl_devices_state
, &error_fatal
);
757 /* set the number of CPUs */
758 x86_rtc_set_cpus_count(x86ms
->rtc
, x86ms
->boot_cpus
);
760 fw_cfg_add_extra_pci_roots(pcms
->bus
, x86ms
->fw_cfg
);
764 fw_cfg_build_smbios(MACHINE(pcms
), x86ms
->fw_cfg
);
765 fw_cfg_build_feature_control(MACHINE(pcms
), x86ms
->fw_cfg
);
766 /* update FW_CFG_NB_CPUS to account for -device added CPUs */
767 fw_cfg_modify_i16(x86ms
->fw_cfg
, FW_CFG_NB_CPUS
, x86ms
->boot_cpus
);
771 void pc_guest_info_init(PCMachineState
*pcms
)
773 X86MachineState
*x86ms
= X86_MACHINE(pcms
);
775 x86ms
->apic_xrupt_override
= true;
776 pcms
->machine_done
.notify
= pc_machine_done
;
777 qemu_add_machine_init_done_notifier(&pcms
->machine_done
);
780 /* setup pci memory address space mapping into system address space */
781 void pc_pci_as_mapping_init(Object
*owner
, MemoryRegion
*system_memory
,
782 MemoryRegion
*pci_address_space
)
784 /* Set to lower priority than RAM */
785 memory_region_add_subregion_overlap(system_memory
, 0x0,
786 pci_address_space
, -1);
789 void xen_load_linux(PCMachineState
*pcms
)
793 PCMachineClass
*pcmc
= PC_MACHINE_GET_CLASS(pcms
);
794 X86MachineState
*x86ms
= X86_MACHINE(pcms
);
796 assert(MACHINE(pcms
)->kernel_filename
!= NULL
);
798 fw_cfg
= fw_cfg_init_io(FW_CFG_IO_BASE
);
799 fw_cfg_add_i16(fw_cfg
, FW_CFG_NB_CPUS
, x86ms
->boot_cpus
);
802 x86_load_linux(x86ms
, fw_cfg
, pcmc
->acpi_data_size
,
803 pcmc
->pvh_enabled
, pcmc
->legacy_no_rng_seed
);
804 for (i
= 0; i
< nb_option_roms
; i
++) {
805 assert(!strcmp(option_rom
[i
].name
, "linuxboot.bin") ||
806 !strcmp(option_rom
[i
].name
, "linuxboot_dma.bin") ||
807 !strcmp(option_rom
[i
].name
, "pvh.bin") ||
808 !strcmp(option_rom
[i
].name
, "multiboot.bin") ||
809 !strcmp(option_rom
[i
].name
, "multiboot_dma.bin"));
810 rom_add_option(option_rom
[i
].name
, option_rom
[i
].bootindex
);
812 x86ms
->fw_cfg
= fw_cfg
;
815 #define PC_ROM_MIN_VGA 0xc0000
816 #define PC_ROM_MIN_OPTION 0xc8000
817 #define PC_ROM_MAX 0xe0000
818 #define PC_ROM_ALIGN 0x800
819 #define PC_ROM_SIZE (PC_ROM_MAX - PC_ROM_MIN_VGA)
821 static hwaddr
pc_above_4g_end(PCMachineState
*pcms
)
823 X86MachineState
*x86ms
= X86_MACHINE(pcms
);
825 if (pcms
->sgx_epc
.size
!= 0) {
826 return sgx_epc_above_4g_end(&pcms
->sgx_epc
);
829 return x86ms
->above_4g_mem_start
+ x86ms
->above_4g_mem_size
;
832 static void pc_get_device_memory_range(PCMachineState
*pcms
,
834 ram_addr_t
*device_mem_size
)
836 PCMachineClass
*pcmc
= PC_MACHINE_GET_CLASS(pcms
);
837 MachineState
*machine
= MACHINE(pcms
);
841 size
= machine
->maxram_size
- machine
->ram_size
;
842 addr
= ROUND_UP(pc_above_4g_end(pcms
), 1 * GiB
);
844 if (pcmc
->enforce_aligned_dimm
) {
845 /* size device region assuming 1G page max alignment per slot */
846 size
+= (1 * GiB
) * machine
->ram_slots
;
850 *device_mem_size
= size
;
853 static uint64_t pc_get_cxl_range_start(PCMachineState
*pcms
)
855 PCMachineClass
*pcmc
= PC_MACHINE_GET_CLASS(pcms
);
859 if (pcmc
->has_reserved_memory
) {
860 pc_get_device_memory_range(pcms
, &cxl_base
, &size
);
863 cxl_base
= pc_above_4g_end(pcms
);
869 static uint64_t pc_get_cxl_range_end(PCMachineState
*pcms
)
871 uint64_t start
= pc_get_cxl_range_start(pcms
) + MiB
;
873 if (pcms
->cxl_devices_state
.fixed_windows
) {
876 start
= ROUND_UP(start
, 256 * MiB
);
877 for (it
= pcms
->cxl_devices_state
.fixed_windows
; it
; it
= it
->next
) {
878 CXLFixedWindow
*fw
= it
->data
;
886 static hwaddr
pc_max_used_gpa(PCMachineState
*pcms
, uint64_t pci_hole64_size
)
888 X86CPU
*cpu
= X86_CPU(first_cpu
);
890 /* 32-bit systems don't have hole64 thus return max CPU address */
891 if (cpu
->phys_bits
<= 32) {
892 return ((hwaddr
)1 << cpu
->phys_bits
) - 1;
895 return pc_pci_hole64_start() + pci_hole64_size
- 1;
899 * AMD systems with an IOMMU have an additional hole close to the
900 * 1Tb, which are special GPAs that cannot be DMA mapped. Depending
901 * on kernel version, VFIO may or may not let you DMA map those ranges.
902 * Starting Linux v5.4 we validate it, and can't create guests on AMD machines
903 * with certain memory sizes. It's also wrong to use those IOVA ranges
904 * in detriment of leading to IOMMU INVALID_DEVICE_REQUEST or worse.
905 * The ranges reserved for Hyper-Transport are:
907 * FD_0000_0000h - FF_FFFF_FFFFh
909 * The ranges represent the following:
911 * Base Address Top Address Use
913 * FD_0000_0000h FD_F7FF_FFFFh Reserved interrupt address space
914 * FD_F800_0000h FD_F8FF_FFFFh Interrupt/EOI IntCtl
915 * FD_F900_0000h FD_F90F_FFFFh Legacy PIC IACK
916 * FD_F910_0000h FD_F91F_FFFFh System Management
917 * FD_F920_0000h FD_FAFF_FFFFh Reserved Page Tables
918 * FD_FB00_0000h FD_FBFF_FFFFh Address Translation
919 * FD_FC00_0000h FD_FDFF_FFFFh I/O Space
920 * FD_FE00_0000h FD_FFFF_FFFFh Configuration
921 * FE_0000_0000h FE_1FFF_FFFFh Extended Configuration/Device Messages
922 * FE_2000_0000h FF_FFFF_FFFFh Reserved
924 * See AMD IOMMU spec, section 2.1.2 "IOMMU Logical Topology",
925 * Table 3: Special Address Controls (GPA) for more information.
927 #define AMD_HT_START 0xfd00000000UL
928 #define AMD_HT_END 0xffffffffffUL
929 #define AMD_ABOVE_1TB_START (AMD_HT_END + 1)
930 #define AMD_HT_SIZE (AMD_ABOVE_1TB_START - AMD_HT_START)
932 void pc_memory_init(PCMachineState
*pcms
,
933 MemoryRegion
*system_memory
,
934 MemoryRegion
*rom_memory
,
935 MemoryRegion
**ram_memory
,
936 uint64_t pci_hole64_size
)
939 MemoryRegion
*option_rom_mr
;
940 MemoryRegion
*ram_below_4g
, *ram_above_4g
;
942 MachineState
*machine
= MACHINE(pcms
);
943 MachineClass
*mc
= MACHINE_GET_CLASS(machine
);
944 PCMachineClass
*pcmc
= PC_MACHINE_GET_CLASS(pcms
);
945 X86MachineState
*x86ms
= X86_MACHINE(pcms
);
946 hwaddr maxphysaddr
, maxusedaddr
;
947 hwaddr cxl_base
, cxl_resv_end
= 0;
948 X86CPU
*cpu
= X86_CPU(first_cpu
);
950 assert(machine
->ram_size
== x86ms
->below_4g_mem_size
+
951 x86ms
->above_4g_mem_size
);
953 linux_boot
= (machine
->kernel_filename
!= NULL
);
956 * The HyperTransport range close to the 1T boundary is unique to AMD
957 * hosts with IOMMUs enabled. Restrict the ram-above-4g relocation
958 * to above 1T to AMD vCPUs only. @enforce_amd_1tb_hole is only false in
959 * older machine types (<= 7.0) for compatibility purposes.
961 if (IS_AMD_CPU(&cpu
->env
) && pcmc
->enforce_amd_1tb_hole
) {
962 /* Bail out if max possible address does not cross HT range */
963 if (pc_max_used_gpa(pcms
, pci_hole64_size
) >= AMD_HT_START
) {
964 x86ms
->above_4g_mem_start
= AMD_ABOVE_1TB_START
;
968 * Advertise the HT region if address space covers the reserved
969 * region or if we relocate.
971 if (cpu
->phys_bits
>= 40) {
972 e820_add_entry(AMD_HT_START
, AMD_HT_SIZE
, E820_RESERVED
);
977 * phys-bits is required to be appropriately configured
978 * to make sure max used GPA is reachable.
980 maxusedaddr
= pc_max_used_gpa(pcms
, pci_hole64_size
);
981 maxphysaddr
= ((hwaddr
)1 << cpu
->phys_bits
) - 1;
982 if (maxphysaddr
< maxusedaddr
) {
983 error_report("Address space limit 0x%"PRIx64
" < 0x%"PRIx64
984 " phys-bits too low (%u)",
985 maxphysaddr
, maxusedaddr
, cpu
->phys_bits
);
990 * Split single memory region and use aliases to address portions of it,
991 * done for backwards compatibility with older qemus.
993 *ram_memory
= machine
->ram
;
994 ram_below_4g
= g_malloc(sizeof(*ram_below_4g
));
995 memory_region_init_alias(ram_below_4g
, NULL
, "ram-below-4g", machine
->ram
,
996 0, x86ms
->below_4g_mem_size
);
997 memory_region_add_subregion(system_memory
, 0, ram_below_4g
);
998 e820_add_entry(0, x86ms
->below_4g_mem_size
, E820_RAM
);
999 if (x86ms
->above_4g_mem_size
> 0) {
1000 ram_above_4g
= g_malloc(sizeof(*ram_above_4g
));
1001 memory_region_init_alias(ram_above_4g
, NULL
, "ram-above-4g",
1003 x86ms
->below_4g_mem_size
,
1004 x86ms
->above_4g_mem_size
);
1005 memory_region_add_subregion(system_memory
, x86ms
->above_4g_mem_start
,
1007 e820_add_entry(x86ms
->above_4g_mem_start
, x86ms
->above_4g_mem_size
,
1011 if (pcms
->sgx_epc
.size
!= 0) {
1012 e820_add_entry(pcms
->sgx_epc
.base
, pcms
->sgx_epc
.size
, E820_RESERVED
);
1015 if (!pcmc
->has_reserved_memory
&&
1016 (machine
->ram_slots
||
1017 (machine
->maxram_size
> machine
->ram_size
))) {
1019 error_report("\"-memory 'slots|maxmem'\" is not supported by: %s",
1024 /* always allocate the device memory information */
1025 machine
->device_memory
= g_malloc0(sizeof(*machine
->device_memory
));
1027 /* initialize device memory address space */
1028 if (pcmc
->has_reserved_memory
&&
1029 (machine
->ram_size
< machine
->maxram_size
)) {
1030 ram_addr_t device_mem_size
;
1032 if (machine
->ram_slots
> ACPI_MAX_RAM_SLOTS
) {
1033 error_report("unsupported amount of memory slots: %"PRIu64
,
1034 machine
->ram_slots
);
1038 if (QEMU_ALIGN_UP(machine
->maxram_size
,
1039 TARGET_PAGE_SIZE
) != machine
->maxram_size
) {
1040 error_report("maximum memory size must by aligned to multiple of "
1041 "%d bytes", TARGET_PAGE_SIZE
);
1045 pc_get_device_memory_range(pcms
, &machine
->device_memory
->base
, &device_mem_size
);
1047 if ((machine
->device_memory
->base
+ device_mem_size
) <
1049 error_report("unsupported amount of maximum memory: " RAM_ADDR_FMT
,
1050 machine
->maxram_size
);
1054 memory_region_init(&machine
->device_memory
->mr
, OBJECT(pcms
),
1055 "device-memory", device_mem_size
);
1056 memory_region_add_subregion(system_memory
, machine
->device_memory
->base
,
1057 &machine
->device_memory
->mr
);
1060 if (pcms
->cxl_devices_state
.is_enabled
) {
1061 MemoryRegion
*mr
= &pcms
->cxl_devices_state
.host_mr
;
1062 hwaddr cxl_size
= MiB
;
1064 cxl_base
= pc_get_cxl_range_start(pcms
);
1065 e820_add_entry(cxl_base
, cxl_size
, E820_RESERVED
);
1066 memory_region_init(mr
, OBJECT(machine
), "cxl_host_reg", cxl_size
);
1067 memory_region_add_subregion(system_memory
, cxl_base
, mr
);
1068 cxl_resv_end
= cxl_base
+ cxl_size
;
1069 if (pcms
->cxl_devices_state
.fixed_windows
) {
1070 hwaddr cxl_fmw_base
;
1073 cxl_fmw_base
= ROUND_UP(cxl_base
+ cxl_size
, 256 * MiB
);
1074 for (it
= pcms
->cxl_devices_state
.fixed_windows
; it
; it
= it
->next
) {
1075 CXLFixedWindow
*fw
= it
->data
;
1077 fw
->base
= cxl_fmw_base
;
1078 memory_region_init_io(&fw
->mr
, OBJECT(machine
), &cfmws_ops
, fw
,
1079 "cxl-fixed-memory-region", fw
->size
);
1080 memory_region_add_subregion(system_memory
, fw
->base
, &fw
->mr
);
1081 e820_add_entry(fw
->base
, fw
->size
, E820_RESERVED
);
1082 cxl_fmw_base
+= fw
->size
;
1083 cxl_resv_end
= cxl_fmw_base
;
1088 /* Initialize PC system firmware */
1089 pc_system_firmware_init(pcms
, rom_memory
);
1091 option_rom_mr
= g_malloc(sizeof(*option_rom_mr
));
1092 memory_region_init_ram(option_rom_mr
, NULL
, "pc.rom", PC_ROM_SIZE
,
1094 if (pcmc
->pci_enabled
) {
1095 memory_region_set_readonly(option_rom_mr
, true);
1097 memory_region_add_subregion_overlap(rom_memory
,
1102 fw_cfg
= fw_cfg_arch_create(machine
,
1103 x86ms
->boot_cpus
, x86ms
->apic_id_limit
);
1107 if (pcmc
->has_reserved_memory
&& machine
->device_memory
->base
) {
1108 uint64_t *val
= g_malloc(sizeof(*val
));
1109 PCMachineClass
*pcmc
= PC_MACHINE_GET_CLASS(pcms
);
1110 uint64_t res_mem_end
= machine
->device_memory
->base
;
1112 if (!pcmc
->broken_reserved_end
) {
1113 res_mem_end
+= memory_region_size(&machine
->device_memory
->mr
);
1116 if (pcms
->cxl_devices_state
.is_enabled
) {
1117 res_mem_end
= cxl_resv_end
;
1119 *val
= cpu_to_le64(ROUND_UP(res_mem_end
, 1 * GiB
));
1120 fw_cfg_add_file(fw_cfg
, "etc/reserved-memory-end", val
, sizeof(*val
));
1124 x86_load_linux(x86ms
, fw_cfg
, pcmc
->acpi_data_size
,
1125 pcmc
->pvh_enabled
, pcmc
->legacy_no_rng_seed
);
1128 for (i
= 0; i
< nb_option_roms
; i
++) {
1129 rom_add_option(option_rom
[i
].name
, option_rom
[i
].bootindex
);
1131 x86ms
->fw_cfg
= fw_cfg
;
1133 /* Init default IOAPIC address space */
1134 x86ms
->ioapic_as
= &address_space_memory
;
1136 /* Init ACPI memory hotplug IO base address */
1137 pcms
->memhp_io_base
= ACPI_MEMORY_HOTPLUG_BASE
;
1141 * The 64bit pci hole starts after "above 4G RAM" and
1142 * potentially the space reserved for memory hotplug.
1144 uint64_t pc_pci_hole64_start(void)
1146 PCMachineState
*pcms
= PC_MACHINE(qdev_get_machine());
1147 PCMachineClass
*pcmc
= PC_MACHINE_GET_CLASS(pcms
);
1148 MachineState
*ms
= MACHINE(pcms
);
1149 uint64_t hole64_start
= 0;
1150 ram_addr_t size
= 0;
1152 if (pcms
->cxl_devices_state
.is_enabled
) {
1153 hole64_start
= pc_get_cxl_range_end(pcms
);
1154 } else if (pcmc
->has_reserved_memory
&& (ms
->ram_size
< ms
->maxram_size
)) {
1155 pc_get_device_memory_range(pcms
, &hole64_start
, &size
);
1156 if (!pcmc
->broken_reserved_end
) {
1157 hole64_start
+= size
;
1160 hole64_start
= pc_above_4g_end(pcms
);
1163 return ROUND_UP(hole64_start
, 1 * GiB
);
1166 DeviceState
*pc_vga_init(ISABus
*isa_bus
, PCIBus
*pci_bus
)
1168 DeviceState
*dev
= NULL
;
1170 rom_set_order_override(FW_CFG_ORDER_OVERRIDE_VGA
);
1172 PCIDevice
*pcidev
= pci_vga_init(pci_bus
);
1173 dev
= pcidev
? &pcidev
->qdev
: NULL
;
1174 } else if (isa_bus
) {
1175 ISADevice
*isadev
= isa_vga_init(isa_bus
);
1176 dev
= isadev
? DEVICE(isadev
) : NULL
;
1178 rom_reset_order_override();
1182 static const MemoryRegionOps ioport80_io_ops
= {
1183 .write
= ioport80_write
,
1184 .read
= ioport80_read
,
1185 .endianness
= DEVICE_NATIVE_ENDIAN
,
1187 .min_access_size
= 1,
1188 .max_access_size
= 1,
1192 static const MemoryRegionOps ioportF0_io_ops
= {
1193 .write
= ioportF0_write
,
1194 .read
= ioportF0_read
,
1195 .endianness
= DEVICE_NATIVE_ENDIAN
,
1197 .min_access_size
= 1,
1198 .max_access_size
= 1,
1202 static void pc_superio_init(ISABus
*isa_bus
, bool create_fdctrl
,
1203 bool create_i8042
, bool no_vmport
)
1206 DriveInfo
*fd
[MAX_FD
];
1208 ISADevice
*fdc
, *i8042
, *port92
, *vmmouse
;
1210 serial_hds_isa_init(isa_bus
, 0, MAX_ISA_SERIAL_PORTS
);
1211 parallel_hds_isa_init(isa_bus
, MAX_PARALLEL_PORTS
);
1213 for (i
= 0; i
< MAX_FD
; i
++) {
1214 fd
[i
] = drive_get(IF_FLOPPY
, 0, i
);
1215 create_fdctrl
|= !!fd
[i
];
1217 if (create_fdctrl
) {
1218 fdc
= isa_new(TYPE_ISA_FDC
);
1220 isa_realize_and_unref(fdc
, isa_bus
, &error_fatal
);
1221 isa_fdc_init_drives(fdc
, fd
);
1225 if (!create_i8042
) {
1229 i8042
= isa_create_simple(isa_bus
, TYPE_I8042
);
1231 isa_create_simple(isa_bus
, TYPE_VMPORT
);
1232 vmmouse
= isa_try_new("vmmouse");
1237 object_property_set_link(OBJECT(vmmouse
), TYPE_I8042
, OBJECT(i8042
),
1239 isa_realize_and_unref(vmmouse
, isa_bus
, &error_fatal
);
1241 port92
= isa_create_simple(isa_bus
, TYPE_PORT92
);
1243 a20_line
= qemu_allocate_irqs(handle_a20_line_change
, first_cpu
, 2);
1244 i8042_setup_a20_line(i8042
, a20_line
[0]);
1245 qdev_connect_gpio_out_named(DEVICE(port92
),
1246 PORT92_A20_LINE
, 0, a20_line
[1]);
1250 void pc_basic_device_init(struct PCMachineState
*pcms
,
1251 ISABus
*isa_bus
, qemu_irq
*gsi
,
1252 ISADevice
**rtc_state
,
1257 DeviceState
*hpet
= NULL
;
1258 int pit_isa_irq
= 0;
1259 qemu_irq pit_alt_irq
= NULL
;
1260 qemu_irq rtc_irq
= NULL
;
1261 ISADevice
*pit
= NULL
;
1262 MemoryRegion
*ioport80_io
= g_new(MemoryRegion
, 1);
1263 MemoryRegion
*ioportF0_io
= g_new(MemoryRegion
, 1);
1264 X86MachineState
*x86ms
= X86_MACHINE(pcms
);
1266 memory_region_init_io(ioport80_io
, NULL
, &ioport80_io_ops
, NULL
, "ioport80", 1);
1267 memory_region_add_subregion(isa_bus
->address_space_io
, 0x80, ioport80_io
);
1269 memory_region_init_io(ioportF0_io
, NULL
, &ioportF0_io_ops
, NULL
, "ioportF0", 1);
1270 memory_region_add_subregion(isa_bus
->address_space_io
, 0xf0, ioportF0_io
);
1273 * Check if an HPET shall be created.
1275 * Without KVM_CAP_PIT_STATE2, we cannot switch off the in-kernel PIT
1276 * when the HPET wants to take over. Thus we have to disable the latter.
1278 if (pcms
->hpet_enabled
&& (!kvm_irqchip_in_kernel() ||
1279 kvm_has_pit_state2())) {
1280 hpet
= qdev_try_new(TYPE_HPET
);
1282 error_report("couldn't create HPET device");
1286 * For pc-piix-*, hpet's intcap is always IRQ2. For pc-q35-1.7 and
1287 * earlier, use IRQ2 for compat. Otherwise, use IRQ16~23, IRQ8 and
1290 uint8_t compat
= object_property_get_uint(OBJECT(hpet
),
1293 qdev_prop_set_uint32(hpet
, HPET_INTCAP
, hpet_irqs
);
1295 sysbus_realize_and_unref(SYS_BUS_DEVICE(hpet
), &error_fatal
);
1296 sysbus_mmio_map(SYS_BUS_DEVICE(hpet
), 0, HPET_BASE
);
1298 for (i
= 0; i
< GSI_NUM_PINS
; i
++) {
1299 sysbus_connect_irq(SYS_BUS_DEVICE(hpet
), i
, gsi
[i
]);
1302 pit_alt_irq
= qdev_get_gpio_in(hpet
, HPET_LEGACY_PIT_INT
);
1303 rtc_irq
= qdev_get_gpio_in(hpet
, HPET_LEGACY_RTC_INT
);
1305 *rtc_state
= mc146818_rtc_init(isa_bus
, 2000, rtc_irq
);
1307 qemu_register_boot_set(pc_boot_set
, *rtc_state
);
1309 if (!xen_enabled() &&
1310 (x86ms
->pit
== ON_OFF_AUTO_AUTO
|| x86ms
->pit
== ON_OFF_AUTO_ON
)) {
1311 if (kvm_pit_in_kernel()) {
1312 pit
= kvm_pit_init(isa_bus
, 0x40);
1314 pit
= i8254_pit_init(isa_bus
, 0x40, pit_isa_irq
, pit_alt_irq
);
1317 /* connect PIT to output control line of the HPET */
1318 qdev_connect_gpio_out(hpet
, 0, qdev_get_gpio_in(DEVICE(pit
), 0));
1320 pcspk_init(pcms
->pcspk
, isa_bus
, pit
);
1323 i8257_dma_init(isa_bus
, 0);
1326 pc_superio_init(isa_bus
, create_fdctrl
, pcms
->i8042_enabled
,
1327 pcms
->vmport
!= ON_OFF_AUTO_ON
);
1330 void pc_nic_init(PCMachineClass
*pcmc
, ISABus
*isa_bus
, PCIBus
*pci_bus
)
1334 rom_set_order_override(FW_CFG_ORDER_OVERRIDE_NIC
);
1335 for (i
= 0; i
< nb_nics
; i
++) {
1336 NICInfo
*nd
= &nd_table
[i
];
1337 const char *model
= nd
->model
? nd
->model
: pcmc
->default_nic_model
;
1339 if (g_str_equal(model
, "ne2k_isa")) {
1340 pc_init_ne2k_isa(isa_bus
, nd
);
1342 pci_nic_init_nofail(nd
, pci_bus
, model
, NULL
);
1345 rom_reset_order_override();
1348 void pc_i8259_create(ISABus
*isa_bus
, qemu_irq
*i8259_irqs
)
1352 if (kvm_pic_in_kernel()) {
1353 i8259
= kvm_i8259_init(isa_bus
);
1354 } else if (xen_enabled()) {
1355 i8259
= xen_interrupt_controller_init();
1357 i8259
= i8259_init(isa_bus
, x86_allocate_cpu_irq());
1360 for (size_t i
= 0; i
< ISA_NUM_IRQS
; i
++) {
1361 i8259_irqs
[i
] = i8259
[i
];
1367 static void pc_memory_pre_plug(HotplugHandler
*hotplug_dev
, DeviceState
*dev
,
1370 const PCMachineState
*pcms
= PC_MACHINE(hotplug_dev
);
1371 const X86MachineState
*x86ms
= X86_MACHINE(hotplug_dev
);
1372 const PCMachineClass
*pcmc
= PC_MACHINE_GET_CLASS(pcms
);
1373 const MachineState
*ms
= MACHINE(hotplug_dev
);
1374 const bool is_nvdimm
= object_dynamic_cast(OBJECT(dev
), TYPE_NVDIMM
);
1375 const uint64_t legacy_align
= TARGET_PAGE_SIZE
;
1376 Error
*local_err
= NULL
;
1379 * When -no-acpi is used with Q35 machine type, no ACPI is built,
1380 * but pcms->acpi_dev is still created. Check !acpi_enabled in
1381 * addition to cover this case.
1383 if (!x86ms
->acpi_dev
|| !x86_machine_is_acpi_enabled(x86ms
)) {
1385 "memory hotplug is not enabled: missing acpi device or acpi disabled");
1389 if (is_nvdimm
&& !ms
->nvdimms_state
->is_enabled
) {
1390 error_setg(errp
, "nvdimm is not enabled: missing 'nvdimm' in '-M'");
1394 hotplug_handler_pre_plug(x86ms
->acpi_dev
, dev
, &local_err
);
1396 error_propagate(errp
, local_err
);
1400 pc_dimm_pre_plug(PC_DIMM(dev
), MACHINE(hotplug_dev
),
1401 pcmc
->enforce_aligned_dimm
? NULL
: &legacy_align
, errp
);
1404 static void pc_memory_plug(HotplugHandler
*hotplug_dev
,
1405 DeviceState
*dev
, Error
**errp
)
1407 PCMachineState
*pcms
= PC_MACHINE(hotplug_dev
);
1408 X86MachineState
*x86ms
= X86_MACHINE(hotplug_dev
);
1409 MachineState
*ms
= MACHINE(hotplug_dev
);
1410 bool is_nvdimm
= object_dynamic_cast(OBJECT(dev
), TYPE_NVDIMM
);
1412 pc_dimm_plug(PC_DIMM(dev
), MACHINE(pcms
));
1415 nvdimm_plug(ms
->nvdimms_state
);
1418 hotplug_handler_plug(x86ms
->acpi_dev
, dev
, &error_abort
);
1421 static void pc_memory_unplug_request(HotplugHandler
*hotplug_dev
,
1422 DeviceState
*dev
, Error
**errp
)
1424 X86MachineState
*x86ms
= X86_MACHINE(hotplug_dev
);
1427 * When -no-acpi is used with Q35 machine type, no ACPI is built,
1428 * but pcms->acpi_dev is still created. Check !acpi_enabled in
1429 * addition to cover this case.
1431 if (!x86ms
->acpi_dev
|| !x86_machine_is_acpi_enabled(x86ms
)) {
1433 "memory hotplug is not enabled: missing acpi device or acpi disabled");
1437 if (object_dynamic_cast(OBJECT(dev
), TYPE_NVDIMM
)) {
1438 error_setg(errp
, "nvdimm device hot unplug is not supported yet.");
1442 hotplug_handler_unplug_request(x86ms
->acpi_dev
, dev
,
1446 static void pc_memory_unplug(HotplugHandler
*hotplug_dev
,
1447 DeviceState
*dev
, Error
**errp
)
1449 PCMachineState
*pcms
= PC_MACHINE(hotplug_dev
);
1450 X86MachineState
*x86ms
= X86_MACHINE(hotplug_dev
);
1451 Error
*local_err
= NULL
;
1453 hotplug_handler_unplug(x86ms
->acpi_dev
, dev
, &local_err
);
1458 pc_dimm_unplug(PC_DIMM(dev
), MACHINE(pcms
));
1459 qdev_unrealize(dev
);
1461 error_propagate(errp
, local_err
);
1464 static void pc_virtio_md_pci_pre_plug(HotplugHandler
*hotplug_dev
,
1465 DeviceState
*dev
, Error
**errp
)
1467 HotplugHandler
*hotplug_dev2
= qdev_get_bus_hotplug_handler(dev
);
1468 Error
*local_err
= NULL
;
1470 if (!hotplug_dev2
&& dev
->hotplugged
) {
1472 * Without a bus hotplug handler, we cannot control the plug/unplug
1473 * order. We should never reach this point when hotplugging on x86,
1474 * however, better add a safety net.
1476 error_setg(errp
, "hotplug of virtio based memory devices not supported"
1481 * First, see if we can plug this memory device at all. If that
1482 * succeeds, branch of to the actual hotplug handler.
1484 memory_device_pre_plug(MEMORY_DEVICE(dev
), MACHINE(hotplug_dev
), NULL
,
1486 if (!local_err
&& hotplug_dev2
) {
1487 hotplug_handler_pre_plug(hotplug_dev2
, dev
, &local_err
);
1489 error_propagate(errp
, local_err
);
1492 static void pc_virtio_md_pci_plug(HotplugHandler
*hotplug_dev
,
1493 DeviceState
*dev
, Error
**errp
)
1495 HotplugHandler
*hotplug_dev2
= qdev_get_bus_hotplug_handler(dev
);
1496 Error
*local_err
= NULL
;
1499 * Plug the memory device first and then branch off to the actual
1500 * hotplug handler. If that one fails, we can easily undo the memory
1503 memory_device_plug(MEMORY_DEVICE(dev
), MACHINE(hotplug_dev
));
1505 hotplug_handler_plug(hotplug_dev2
, dev
, &local_err
);
1507 memory_device_unplug(MEMORY_DEVICE(dev
), MACHINE(hotplug_dev
));
1510 error_propagate(errp
, local_err
);
1513 static void pc_virtio_md_pci_unplug_request(HotplugHandler
*hotplug_dev
,
1514 DeviceState
*dev
, Error
**errp
)
1516 /* We don't support hot unplug of virtio based memory devices */
1517 error_setg(errp
, "virtio based memory devices cannot be unplugged.");
1520 static void pc_virtio_md_pci_unplug(HotplugHandler
*hotplug_dev
,
1521 DeviceState
*dev
, Error
**errp
)
1523 /* We don't support hot unplug of virtio based memory devices */
1526 static void pc_machine_device_pre_plug_cb(HotplugHandler
*hotplug_dev
,
1527 DeviceState
*dev
, Error
**errp
)
1529 if (object_dynamic_cast(OBJECT(dev
), TYPE_PC_DIMM
)) {
1530 pc_memory_pre_plug(hotplug_dev
, dev
, errp
);
1531 } else if (object_dynamic_cast(OBJECT(dev
), TYPE_CPU
)) {
1532 x86_cpu_pre_plug(hotplug_dev
, dev
, errp
);
1533 } else if (object_dynamic_cast(OBJECT(dev
), TYPE_VIRTIO_PMEM_PCI
) ||
1534 object_dynamic_cast(OBJECT(dev
), TYPE_VIRTIO_MEM_PCI
)) {
1535 pc_virtio_md_pci_pre_plug(hotplug_dev
, dev
, errp
);
1536 } else if (object_dynamic_cast(OBJECT(dev
), TYPE_VIRTIO_IOMMU_PCI
)) {
1537 /* Declare the APIC range as the reserved MSI region */
1538 char *resv_prop_str
= g_strdup_printf("0xfee00000:0xfeefffff:%d",
1539 VIRTIO_IOMMU_RESV_MEM_T_MSI
);
1541 object_property_set_uint(OBJECT(dev
), "len-reserved-regions", 1, errp
);
1542 object_property_set_str(OBJECT(dev
), "reserved-regions[0]",
1543 resv_prop_str
, errp
);
1544 g_free(resv_prop_str
);
1547 if (object_dynamic_cast(OBJECT(dev
), TYPE_X86_IOMMU_DEVICE
) ||
1548 object_dynamic_cast(OBJECT(dev
), TYPE_VIRTIO_IOMMU_PCI
)) {
1549 PCMachineState
*pcms
= PC_MACHINE(hotplug_dev
);
1552 error_setg(errp
, "QEMU does not support multiple vIOMMUs "
1560 static void pc_machine_device_plug_cb(HotplugHandler
*hotplug_dev
,
1561 DeviceState
*dev
, Error
**errp
)
1563 if (object_dynamic_cast(OBJECT(dev
), TYPE_PC_DIMM
)) {
1564 pc_memory_plug(hotplug_dev
, dev
, errp
);
1565 } else if (object_dynamic_cast(OBJECT(dev
), TYPE_CPU
)) {
1566 x86_cpu_plug(hotplug_dev
, dev
, errp
);
1567 } else if (object_dynamic_cast(OBJECT(dev
), TYPE_VIRTIO_PMEM_PCI
) ||
1568 object_dynamic_cast(OBJECT(dev
), TYPE_VIRTIO_MEM_PCI
)) {
1569 pc_virtio_md_pci_plug(hotplug_dev
, dev
, errp
);
1573 static void pc_machine_device_unplug_request_cb(HotplugHandler
*hotplug_dev
,
1574 DeviceState
*dev
, Error
**errp
)
1576 if (object_dynamic_cast(OBJECT(dev
), TYPE_PC_DIMM
)) {
1577 pc_memory_unplug_request(hotplug_dev
, dev
, errp
);
1578 } else if (object_dynamic_cast(OBJECT(dev
), TYPE_CPU
)) {
1579 x86_cpu_unplug_request_cb(hotplug_dev
, dev
, errp
);
1580 } else if (object_dynamic_cast(OBJECT(dev
), TYPE_VIRTIO_PMEM_PCI
) ||
1581 object_dynamic_cast(OBJECT(dev
), TYPE_VIRTIO_MEM_PCI
)) {
1582 pc_virtio_md_pci_unplug_request(hotplug_dev
, dev
, errp
);
1584 error_setg(errp
, "acpi: device unplug request for not supported device"
1585 " type: %s", object_get_typename(OBJECT(dev
)));
1589 static void pc_machine_device_unplug_cb(HotplugHandler
*hotplug_dev
,
1590 DeviceState
*dev
, Error
**errp
)
1592 if (object_dynamic_cast(OBJECT(dev
), TYPE_PC_DIMM
)) {
1593 pc_memory_unplug(hotplug_dev
, dev
, errp
);
1594 } else if (object_dynamic_cast(OBJECT(dev
), TYPE_CPU
)) {
1595 x86_cpu_unplug_cb(hotplug_dev
, dev
, errp
);
1596 } else if (object_dynamic_cast(OBJECT(dev
), TYPE_VIRTIO_PMEM_PCI
) ||
1597 object_dynamic_cast(OBJECT(dev
), TYPE_VIRTIO_MEM_PCI
)) {
1598 pc_virtio_md_pci_unplug(hotplug_dev
, dev
, errp
);
1600 error_setg(errp
, "acpi: device unplug for not supported device"
1601 " type: %s", object_get_typename(OBJECT(dev
)));
1605 static HotplugHandler
*pc_get_hotplug_handler(MachineState
*machine
,
1608 if (object_dynamic_cast(OBJECT(dev
), TYPE_PC_DIMM
) ||
1609 object_dynamic_cast(OBJECT(dev
), TYPE_CPU
) ||
1610 object_dynamic_cast(OBJECT(dev
), TYPE_VIRTIO_PMEM_PCI
) ||
1611 object_dynamic_cast(OBJECT(dev
), TYPE_VIRTIO_MEM_PCI
) ||
1612 object_dynamic_cast(OBJECT(dev
), TYPE_VIRTIO_IOMMU_PCI
) ||
1613 object_dynamic_cast(OBJECT(dev
), TYPE_X86_IOMMU_DEVICE
)) {
1614 return HOTPLUG_HANDLER(machine
);
1621 pc_machine_get_device_memory_region_size(Object
*obj
, Visitor
*v
,
1622 const char *name
, void *opaque
,
1625 MachineState
*ms
= MACHINE(obj
);
1628 if (ms
->device_memory
) {
1629 value
= memory_region_size(&ms
->device_memory
->mr
);
1632 visit_type_int(v
, name
, &value
, errp
);
1635 static void pc_machine_get_vmport(Object
*obj
, Visitor
*v
, const char *name
,
1636 void *opaque
, Error
**errp
)
1638 PCMachineState
*pcms
= PC_MACHINE(obj
);
1639 OnOffAuto vmport
= pcms
->vmport
;
1641 visit_type_OnOffAuto(v
, name
, &vmport
, errp
);
1644 static void pc_machine_set_vmport(Object
*obj
, Visitor
*v
, const char *name
,
1645 void *opaque
, Error
**errp
)
1647 PCMachineState
*pcms
= PC_MACHINE(obj
);
1649 visit_type_OnOffAuto(v
, name
, &pcms
->vmport
, errp
);
1652 static bool pc_machine_get_smbus(Object
*obj
, Error
**errp
)
1654 PCMachineState
*pcms
= PC_MACHINE(obj
);
1656 return pcms
->smbus_enabled
;
1659 static void pc_machine_set_smbus(Object
*obj
, bool value
, Error
**errp
)
1661 PCMachineState
*pcms
= PC_MACHINE(obj
);
1663 pcms
->smbus_enabled
= value
;
1666 static bool pc_machine_get_sata(Object
*obj
, Error
**errp
)
1668 PCMachineState
*pcms
= PC_MACHINE(obj
);
1670 return pcms
->sata_enabled
;
1673 static void pc_machine_set_sata(Object
*obj
, bool value
, Error
**errp
)
1675 PCMachineState
*pcms
= PC_MACHINE(obj
);
1677 pcms
->sata_enabled
= value
;
1680 static bool pc_machine_get_hpet(Object
*obj
, Error
**errp
)
1682 PCMachineState
*pcms
= PC_MACHINE(obj
);
1684 return pcms
->hpet_enabled
;
1687 static void pc_machine_set_hpet(Object
*obj
, bool value
, Error
**errp
)
1689 PCMachineState
*pcms
= PC_MACHINE(obj
);
1691 pcms
->hpet_enabled
= value
;
1694 static bool pc_machine_get_i8042(Object
*obj
, Error
**errp
)
1696 PCMachineState
*pcms
= PC_MACHINE(obj
);
1698 return pcms
->i8042_enabled
;
1701 static void pc_machine_set_i8042(Object
*obj
, bool value
, Error
**errp
)
1703 PCMachineState
*pcms
= PC_MACHINE(obj
);
1705 pcms
->i8042_enabled
= value
;
1708 static bool pc_machine_get_default_bus_bypass_iommu(Object
*obj
, Error
**errp
)
1710 PCMachineState
*pcms
= PC_MACHINE(obj
);
1712 return pcms
->default_bus_bypass_iommu
;
1715 static void pc_machine_set_default_bus_bypass_iommu(Object
*obj
, bool value
,
1718 PCMachineState
*pcms
= PC_MACHINE(obj
);
1720 pcms
->default_bus_bypass_iommu
= value
;
1723 static void pc_machine_get_smbios_ep(Object
*obj
, Visitor
*v
, const char *name
,
1724 void *opaque
, Error
**errp
)
1726 PCMachineState
*pcms
= PC_MACHINE(obj
);
1727 SmbiosEntryPointType smbios_entry_point_type
= pcms
->smbios_entry_point_type
;
1729 visit_type_SmbiosEntryPointType(v
, name
, &smbios_entry_point_type
, errp
);
1732 static void pc_machine_set_smbios_ep(Object
*obj
, Visitor
*v
, const char *name
,
1733 void *opaque
, Error
**errp
)
1735 PCMachineState
*pcms
= PC_MACHINE(obj
);
1737 visit_type_SmbiosEntryPointType(v
, name
, &pcms
->smbios_entry_point_type
, errp
);
1740 static void pc_machine_get_max_ram_below_4g(Object
*obj
, Visitor
*v
,
1741 const char *name
, void *opaque
,
1744 PCMachineState
*pcms
= PC_MACHINE(obj
);
1745 uint64_t value
= pcms
->max_ram_below_4g
;
1747 visit_type_size(v
, name
, &value
, errp
);
1750 static void pc_machine_set_max_ram_below_4g(Object
*obj
, Visitor
*v
,
1751 const char *name
, void *opaque
,
1754 PCMachineState
*pcms
= PC_MACHINE(obj
);
1757 if (!visit_type_size(v
, name
, &value
, errp
)) {
1760 if (value
> 4 * GiB
) {
1762 "Machine option 'max-ram-below-4g=%"PRIu64
1763 "' expects size less than or equal to 4G", value
);
1767 if (value
< 1 * MiB
) {
1768 warn_report("Only %" PRIu64
" bytes of RAM below the 4GiB boundary,"
1769 "BIOS may not work with less than 1MiB", value
);
1772 pcms
->max_ram_below_4g
= value
;
1775 static void pc_machine_get_max_fw_size(Object
*obj
, Visitor
*v
,
1776 const char *name
, void *opaque
,
1779 PCMachineState
*pcms
= PC_MACHINE(obj
);
1780 uint64_t value
= pcms
->max_fw_size
;
1782 visit_type_size(v
, name
, &value
, errp
);
1785 static void pc_machine_set_max_fw_size(Object
*obj
, Visitor
*v
,
1786 const char *name
, void *opaque
,
1789 PCMachineState
*pcms
= PC_MACHINE(obj
);
1790 Error
*error
= NULL
;
1793 visit_type_size(v
, name
, &value
, &error
);
1795 error_propagate(errp
, error
);
1800 * We don't have a theoretically justifiable exact lower bound on the base
1801 * address of any flash mapping. In practice, the IO-APIC MMIO range is
1802 * [0xFEE00000..0xFEE01000] -- see IO_APIC_DEFAULT_ADDRESS --, leaving free
1803 * only 18MB-4KB below 4G. For now, restrict the cumulative mapping to 8MB in
1806 if (value
> 16 * MiB
) {
1808 "User specified max allowed firmware size %" PRIu64
" is "
1809 "greater than 16MiB. If combined firwmare size exceeds "
1810 "16MiB the system may not boot, or experience intermittent"
1811 "stability issues.",
1816 pcms
->max_fw_size
= value
;
1820 static void pc_machine_initfn(Object
*obj
)
1822 PCMachineState
*pcms
= PC_MACHINE(obj
);
1824 #ifdef CONFIG_VMPORT
1825 pcms
->vmport
= ON_OFF_AUTO_AUTO
;
1827 pcms
->vmport
= ON_OFF_AUTO_OFF
;
1828 #endif /* CONFIG_VMPORT */
1829 pcms
->max_ram_below_4g
= 0; /* use default */
1830 pcms
->smbios_entry_point_type
= SMBIOS_ENTRY_POINT_TYPE_32
;
1832 /* acpi build is enabled by default if machine supports it */
1833 pcms
->acpi_build_enabled
= PC_MACHINE_GET_CLASS(pcms
)->has_acpi_build
;
1834 pcms
->smbus_enabled
= true;
1835 pcms
->sata_enabled
= true;
1836 pcms
->i8042_enabled
= true;
1837 pcms
->max_fw_size
= 8 * MiB
;
1839 pcms
->hpet_enabled
= true;
1841 pcms
->default_bus_bypass_iommu
= false;
1843 pc_system_flash_create(pcms
);
1844 pcms
->pcspk
= isa_new(TYPE_PC_SPEAKER
);
1845 object_property_add_alias(OBJECT(pcms
), "pcspk-audiodev",
1846 OBJECT(pcms
->pcspk
), "audiodev");
1847 cxl_machine_init(obj
, &pcms
->cxl_devices_state
);
1850 static void pc_machine_reset(MachineState
*machine
)
1855 qemu_devices_reset();
1857 /* Reset APIC after devices have been reset to cancel
1858 * any changes that qemu_devices_reset() might have done.
1863 x86_cpu_after_reset(cpu
);
1867 static void pc_machine_wakeup(MachineState
*machine
)
1869 cpu_synchronize_all_states();
1870 pc_machine_reset(machine
);
1871 cpu_synchronize_all_post_reset();
1874 static bool pc_hotplug_allowed(MachineState
*ms
, DeviceState
*dev
, Error
**errp
)
1876 X86IOMMUState
*iommu
= x86_iommu_get_default();
1877 IntelIOMMUState
*intel_iommu
;
1880 object_dynamic_cast((Object
*)iommu
, TYPE_INTEL_IOMMU_DEVICE
) &&
1881 object_dynamic_cast((Object
*)dev
, "vfio-pci")) {
1882 intel_iommu
= INTEL_IOMMU_DEVICE(iommu
);
1883 if (!intel_iommu
->caching_mode
) {
1884 error_setg(errp
, "Device assignment is not allowed without "
1885 "enabling caching-mode=on for Intel IOMMU.");
1893 static void pc_machine_class_init(ObjectClass
*oc
, void *data
)
1895 MachineClass
*mc
= MACHINE_CLASS(oc
);
1896 PCMachineClass
*pcmc
= PC_MACHINE_CLASS(oc
);
1897 HotplugHandlerClass
*hc
= HOTPLUG_HANDLER_CLASS(oc
);
1899 pcmc
->pci_enabled
= true;
1900 pcmc
->has_acpi_build
= true;
1901 pcmc
->rsdp_in_ram
= true;
1902 pcmc
->smbios_defaults
= true;
1903 pcmc
->smbios_uuid_encoded
= true;
1904 pcmc
->gigabyte_align
= true;
1905 pcmc
->has_reserved_memory
= true;
1906 pcmc
->kvmclock_enabled
= true;
1907 pcmc
->enforce_aligned_dimm
= true;
1908 pcmc
->enforce_amd_1tb_hole
= true;
1909 /* BIOS ACPI tables: 128K. Other BIOS datastructures: less than 4K reported
1910 * to be used at the moment, 32K should be enough for a while. */
1911 pcmc
->acpi_data_size
= 0x20000 + 0x8000;
1912 pcmc
->pvh_enabled
= true;
1913 pcmc
->kvmclock_create_always
= true;
1914 assert(!mc
->get_hotplug_handler
);
1915 mc
->get_hotplug_handler
= pc_get_hotplug_handler
;
1916 mc
->hotplug_allowed
= pc_hotplug_allowed
;
1917 mc
->cpu_index_to_instance_props
= x86_cpu_index_to_props
;
1918 mc
->get_default_cpu_node_id
= x86_get_default_cpu_node_id
;
1919 mc
->possible_cpu_arch_ids
= x86_possible_cpu_arch_ids
;
1920 mc
->auto_enable_numa_with_memhp
= true;
1921 mc
->auto_enable_numa_with_memdev
= true;
1922 mc
->has_hotpluggable_cpus
= true;
1923 mc
->default_boot_order
= "cad";
1924 mc
->block_default_type
= IF_IDE
;
1926 mc
->reset
= pc_machine_reset
;
1927 mc
->wakeup
= pc_machine_wakeup
;
1928 hc
->pre_plug
= pc_machine_device_pre_plug_cb
;
1929 hc
->plug
= pc_machine_device_plug_cb
;
1930 hc
->unplug_request
= pc_machine_device_unplug_request_cb
;
1931 hc
->unplug
= pc_machine_device_unplug_cb
;
1932 mc
->default_cpu_type
= TARGET_DEFAULT_CPU_TYPE
;
1933 mc
->nvdimm_supported
= true;
1934 mc
->smp_props
.dies_supported
= true;
1935 mc
->default_ram_id
= "pc.ram";
1937 object_class_property_add(oc
, PC_MACHINE_MAX_RAM_BELOW_4G
, "size",
1938 pc_machine_get_max_ram_below_4g
, pc_machine_set_max_ram_below_4g
,
1940 object_class_property_set_description(oc
, PC_MACHINE_MAX_RAM_BELOW_4G
,
1941 "Maximum ram below the 4G boundary (32bit boundary)");
1943 object_class_property_add(oc
, PC_MACHINE_DEVMEM_REGION_SIZE
, "int",
1944 pc_machine_get_device_memory_region_size
, NULL
,
1947 object_class_property_add(oc
, PC_MACHINE_VMPORT
, "OnOffAuto",
1948 pc_machine_get_vmport
, pc_machine_set_vmport
,
1950 object_class_property_set_description(oc
, PC_MACHINE_VMPORT
,
1951 "Enable vmport (pc & q35)");
1953 object_class_property_add_bool(oc
, PC_MACHINE_SMBUS
,
1954 pc_machine_get_smbus
, pc_machine_set_smbus
);
1955 object_class_property_set_description(oc
, PC_MACHINE_SMBUS
,
1956 "Enable/disable system management bus");
1958 object_class_property_add_bool(oc
, PC_MACHINE_SATA
,
1959 pc_machine_get_sata
, pc_machine_set_sata
);
1960 object_class_property_set_description(oc
, PC_MACHINE_SATA
,
1961 "Enable/disable Serial ATA bus");
1963 object_class_property_add_bool(oc
, "hpet",
1964 pc_machine_get_hpet
, pc_machine_set_hpet
);
1965 object_class_property_set_description(oc
, "hpet",
1966 "Enable/disable high precision event timer emulation");
1968 object_class_property_add_bool(oc
, PC_MACHINE_I8042
,
1969 pc_machine_get_i8042
, pc_machine_set_i8042
);
1971 object_class_property_add_bool(oc
, "default-bus-bypass-iommu",
1972 pc_machine_get_default_bus_bypass_iommu
,
1973 pc_machine_set_default_bus_bypass_iommu
);
1975 object_class_property_add(oc
, PC_MACHINE_MAX_FW_SIZE
, "size",
1976 pc_machine_get_max_fw_size
, pc_machine_set_max_fw_size
,
1978 object_class_property_set_description(oc
, PC_MACHINE_MAX_FW_SIZE
,
1979 "Maximum combined firmware size");
1981 object_class_property_add(oc
, PC_MACHINE_SMBIOS_EP
, "str",
1982 pc_machine_get_smbios_ep
, pc_machine_set_smbios_ep
,
1984 object_class_property_set_description(oc
, PC_MACHINE_SMBIOS_EP
,
1985 "SMBIOS Entry Point type [32, 64]");
1988 static const TypeInfo pc_machine_info
= {
1989 .name
= TYPE_PC_MACHINE
,
1990 .parent
= TYPE_X86_MACHINE
,
1992 .instance_size
= sizeof(PCMachineState
),
1993 .instance_init
= pc_machine_initfn
,
1994 .class_size
= sizeof(PCMachineClass
),
1995 .class_init
= pc_machine_class_init
,
1996 .interfaces
= (InterfaceInfo
[]) {
1997 { TYPE_HOTPLUG_HANDLER
},
2002 static void pc_machine_register_types(void)
2004 type_register_static(&pc_machine_info
);
2007 type_init(pc_machine_register_types
)