2 * Device model for i.MX UART
4 * Copyright (c) 2008 OKL
5 * Originally Written by Hans Jiang
6 * Copyright (c) 2011 NICTA Pty Ltd.
7 * Updated by Jean-Christophe Dubois <jcd@tribudubois.net>
9 * This program is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License
11 * as published by the Free Software Foundation; either version
12 * 2 of the License, or (at your option) any later version.
14 * You should have received a copy of the GNU General Public License along
15 * with this program; if not, see <http://www.gnu.org/licenses/>.
21 #include "hw/sysbus.h"
22 #include "chardev/char-fe.h"
23 #include "qom/object.h"
25 #define TYPE_IMX_SERIAL "imx.serial"
26 OBJECT_DECLARE_SIMPLE_TYPE(IMXSerialState
, IMX_SERIAL
)
28 #define URXD_CHARRDY (1<<15) /* character read is valid */
29 #define URXD_ERR (1<<14) /* Character has error */
30 #define URXD_FRMERR (1<<12) /* Character has frame error */
31 #define URXD_BRK (1<<11) /* Break received */
33 #define USR1_PARTYER (1<<15) /* Parity Error */
34 #define USR1_RTSS (1<<14) /* RTS pin status */
35 #define USR1_TRDY (1<<13) /* Tx ready */
36 #define USR1_RTSD (1<<12) /* RTS delta: pin changed state */
37 #define USR1_ESCF (1<<11) /* Escape sequence interrupt */
38 #define USR1_FRAMERR (1<<10) /* Framing error */
39 #define USR1_RRDY (1<<9) /* receiver ready */
40 #define USR1_AGTIM (1<<8) /* Aging timer interrupt */
41 #define USR1_DTRD (1<<7) /* DTR changed */
42 #define USR1_RXDS (1<<6) /* Receiver is idle */
43 #define USR1_AIRINT (1<<5) /* Aysnch IR interrupt */
44 #define USR1_AWAKE (1<<4) /* Falling edge detected on RXd pin */
46 #define USR2_ADET (1<<15) /* Autobaud complete */
47 #define USR2_TXFE (1<<14) /* Transmit FIFO empty */
48 #define USR2_DTRF (1<<13) /* DTR/DSR transition */
49 #define USR2_IDLE (1<<12) /* UART has been idle for too long */
50 #define USR2_ACST (1<<11) /* Autobaud counter stopped */
51 #define USR2_RIDELT (1<<10) /* Ring Indicator delta */
52 #define USR2_RIIN (1<<9) /* Ring Indicator Input */
53 #define USR2_IRINT (1<<8) /* Serial Infrared Interrupt */
54 #define USR2_WAKE (1<<7) /* Start bit detected */
55 #define USR2_DCDDELT (1<<6) /* Data Carrier Detect delta */
56 #define USR2_DCDIN (1<<5) /* Data Carrier Detect Input */
57 #define USR2_RTSF (1<<4) /* RTS transition */
58 #define USR2_TXDC (1<<3) /* Transmission complete */
59 #define USR2_BRCD (1<<2) /* Break condition detected */
60 #define USR2_ORE (1<<1) /* Overrun error */
61 #define USR2_RDR (1<<0) /* Receive data ready */
63 #define UCR1_TRDYEN (1<<13) /* Tx Ready Interrupt Enable */
64 #define UCR1_RRDYEN (1<<9) /* Rx Ready Interrupt Enable */
65 #define UCR1_TXMPTYEN (1<<6) /* Tx Empty Interrupt Enable */
66 #define UCR1_UARTEN (1<<0) /* UART Enable */
68 #define UCR2_TXEN (1<<2) /* Transmitter enable */
69 #define UCR2_RXEN (1<<1) /* Receiver enable */
70 #define UCR2_SRST (1<<0) /* Reset complete */
72 #define UCR4_DREN BIT(0) /* Receive Data Ready interrupt enable */
73 #define UCR4_TCEN BIT(3) /* TX complete interrupt enable */
75 #define UTS1_TXEMPTY (1<<6)
76 #define UTS1_RXEMPTY (1<<5)
77 #define UTS1_TXFULL (1<<4)
78 #define UTS1_RXFULL (1<<3)
80 struct IMXSerialState
{
82 SysBusDevice parent_obj
;
95 * The registers below are implemented just so that the
96 * guest OS sees what it has written