qmp: qmp_send_key(): accept key codes in hex
[qemu.git] / hw / pc.c
blob7e7e0e2235f5309a33a5a7c2db3a3ccfea51995a
1 /*
2 * QEMU PC System Emulator
4 * Copyright (c) 2003-2004 Fabrice Bellard
6 * Permission is hereby granted, free of charge, to any person obtaining a copy
7 * of this software and associated documentation files (the "Software"), to deal
8 * in the Software without restriction, including without limitation the rights
9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10 * copies of the Software, and to permit persons to whom the Software is
11 * furnished to do so, subject to the following conditions:
13 * The above copyright notice and this permission notice shall be included in
14 * all copies or substantial portions of the Software.
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
22 * THE SOFTWARE.
24 #include "hw.h"
25 #include "pc.h"
26 #include "apic.h"
27 #include "fdc.h"
28 #include "ide.h"
29 #include "pci.h"
30 #include "vmware_vga.h"
31 #include "monitor.h"
32 #include "fw_cfg.h"
33 #include "hpet_emul.h"
34 #include "smbios.h"
35 #include "loader.h"
36 #include "elf.h"
37 #include "multiboot.h"
38 #include "mc146818rtc.h"
39 #include "i8254.h"
40 #include "pcspk.h"
41 #include "msi.h"
42 #include "sysbus.h"
43 #include "sysemu.h"
44 #include "kvm.h"
45 #include "kvm_i386.h"
46 #include "xen.h"
47 #include "blockdev.h"
48 #include "hw/block-common.h"
49 #include "ui/qemu-spice.h"
50 #include "memory.h"
51 #include "exec-memory.h"
52 #include "arch_init.h"
53 #include "bitmap.h"
54 #include "vga-pci.h"
56 /* debug PC/ISA interrupts */
57 //#define DEBUG_IRQ
59 #ifdef DEBUG_IRQ
60 #define DPRINTF(fmt, ...) \
61 do { printf("CPUIRQ: " fmt , ## __VA_ARGS__); } while (0)
62 #else
63 #define DPRINTF(fmt, ...)
64 #endif
66 /* Leave a chunk of memory at the top of RAM for the BIOS ACPI tables. */
67 #define ACPI_DATA_SIZE 0x10000
68 #define BIOS_CFG_IOPORT 0x510
69 #define FW_CFG_ACPI_TABLES (FW_CFG_ARCH_LOCAL + 0)
70 #define FW_CFG_SMBIOS_ENTRIES (FW_CFG_ARCH_LOCAL + 1)
71 #define FW_CFG_IRQ0_OVERRIDE (FW_CFG_ARCH_LOCAL + 2)
72 #define FW_CFG_E820_TABLE (FW_CFG_ARCH_LOCAL + 3)
73 #define FW_CFG_HPET (FW_CFG_ARCH_LOCAL + 4)
75 #define MSI_ADDR_BASE 0xfee00000
77 #define E820_NR_ENTRIES 16
79 struct e820_entry {
80 uint64_t address;
81 uint64_t length;
82 uint32_t type;
83 } QEMU_PACKED __attribute((__aligned__(4)));
85 struct e820_table {
86 uint32_t count;
87 struct e820_entry entry[E820_NR_ENTRIES];
88 } QEMU_PACKED __attribute((__aligned__(4)));
90 static struct e820_table e820_table;
91 struct hpet_fw_config hpet_cfg = {.count = UINT8_MAX};
93 void gsi_handler(void *opaque, int n, int level)
95 GSIState *s = opaque;
97 DPRINTF("pc: %s GSI %d\n", level ? "raising" : "lowering", n);
98 if (n < ISA_NUM_IRQS) {
99 qemu_set_irq(s->i8259_irq[n], level);
101 qemu_set_irq(s->ioapic_irq[n], level);
104 static void ioport80_write(void *opaque, uint32_t addr, uint32_t data)
108 /* MSDOS compatibility mode FPU exception support */
109 static qemu_irq ferr_irq;
111 void pc_register_ferr_irq(qemu_irq irq)
113 ferr_irq = irq;
116 /* XXX: add IGNNE support */
117 void cpu_set_ferr(CPUX86State *s)
119 qemu_irq_raise(ferr_irq);
122 static void ioportF0_write(void *opaque, uint32_t addr, uint32_t data)
124 qemu_irq_lower(ferr_irq);
127 /* TSC handling */
128 uint64_t cpu_get_tsc(CPUX86State *env)
130 return cpu_get_ticks();
133 /* SMM support */
135 static cpu_set_smm_t smm_set;
136 static void *smm_arg;
138 void cpu_smm_register(cpu_set_smm_t callback, void *arg)
140 assert(smm_set == NULL);
141 assert(smm_arg == NULL);
142 smm_set = callback;
143 smm_arg = arg;
146 void cpu_smm_update(CPUX86State *env)
148 if (smm_set && smm_arg && env == first_cpu)
149 smm_set(!!(env->hflags & HF_SMM_MASK), smm_arg);
153 /* IRQ handling */
154 int cpu_get_pic_interrupt(CPUX86State *env)
156 int intno;
158 intno = apic_get_interrupt(env->apic_state);
159 if (intno >= 0) {
160 return intno;
162 /* read the irq from the PIC */
163 if (!apic_accept_pic_intr(env->apic_state)) {
164 return -1;
167 intno = pic_read_irq(isa_pic);
168 return intno;
171 static void pic_irq_request(void *opaque, int irq, int level)
173 CPUX86State *env = first_cpu;
175 DPRINTF("pic_irqs: %s irq %d\n", level? "raise" : "lower", irq);
176 if (env->apic_state) {
177 while (env) {
178 if (apic_accept_pic_intr(env->apic_state)) {
179 apic_deliver_pic_intr(env->apic_state, level);
181 env = env->next_cpu;
183 } else {
184 if (level)
185 cpu_interrupt(env, CPU_INTERRUPT_HARD);
186 else
187 cpu_reset_interrupt(env, CPU_INTERRUPT_HARD);
191 /* PC cmos mappings */
193 #define REG_EQUIPMENT_BYTE 0x14
195 static int cmos_get_fd_drive_type(FDriveType fd0)
197 int val;
199 switch (fd0) {
200 case FDRIVE_DRV_144:
201 /* 1.44 Mb 3"5 drive */
202 val = 4;
203 break;
204 case FDRIVE_DRV_288:
205 /* 2.88 Mb 3"5 drive */
206 val = 5;
207 break;
208 case FDRIVE_DRV_120:
209 /* 1.2 Mb 5"5 drive */
210 val = 2;
211 break;
212 case FDRIVE_DRV_NONE:
213 default:
214 val = 0;
215 break;
217 return val;
220 static void cmos_init_hd(ISADevice *s, int type_ofs, int info_ofs,
221 int16_t cylinders, int8_t heads, int8_t sectors)
223 rtc_set_memory(s, type_ofs, 47);
224 rtc_set_memory(s, info_ofs, cylinders);
225 rtc_set_memory(s, info_ofs + 1, cylinders >> 8);
226 rtc_set_memory(s, info_ofs + 2, heads);
227 rtc_set_memory(s, info_ofs + 3, 0xff);
228 rtc_set_memory(s, info_ofs + 4, 0xff);
229 rtc_set_memory(s, info_ofs + 5, 0xc0 | ((heads > 8) << 3));
230 rtc_set_memory(s, info_ofs + 6, cylinders);
231 rtc_set_memory(s, info_ofs + 7, cylinders >> 8);
232 rtc_set_memory(s, info_ofs + 8, sectors);
235 /* convert boot_device letter to something recognizable by the bios */
236 static int boot_device2nibble(char boot_device)
238 switch(boot_device) {
239 case 'a':
240 case 'b':
241 return 0x01; /* floppy boot */
242 case 'c':
243 return 0x02; /* hard drive boot */
244 case 'd':
245 return 0x03; /* CD-ROM boot */
246 case 'n':
247 return 0x04; /* Network boot */
249 return 0;
252 static int set_boot_dev(ISADevice *s, const char *boot_device, int fd_bootchk)
254 #define PC_MAX_BOOT_DEVICES 3
255 int nbds, bds[3] = { 0, };
256 int i;
258 nbds = strlen(boot_device);
259 if (nbds > PC_MAX_BOOT_DEVICES) {
260 error_report("Too many boot devices for PC");
261 return(1);
263 for (i = 0; i < nbds; i++) {
264 bds[i] = boot_device2nibble(boot_device[i]);
265 if (bds[i] == 0) {
266 error_report("Invalid boot device for PC: '%c'",
267 boot_device[i]);
268 return(1);
271 rtc_set_memory(s, 0x3d, (bds[1] << 4) | bds[0]);
272 rtc_set_memory(s, 0x38, (bds[2] << 4) | (fd_bootchk ? 0x0 : 0x1));
273 return(0);
276 static int pc_boot_set(void *opaque, const char *boot_device)
278 return set_boot_dev(opaque, boot_device, 0);
281 typedef struct pc_cmos_init_late_arg {
282 ISADevice *rtc_state;
283 BusState *idebus[2];
284 } pc_cmos_init_late_arg;
286 static void pc_cmos_init_late(void *opaque)
288 pc_cmos_init_late_arg *arg = opaque;
289 ISADevice *s = arg->rtc_state;
290 int16_t cylinders;
291 int8_t heads, sectors;
292 int val;
293 int i, trans;
295 val = 0;
296 if (ide_get_geometry(arg->idebus[0], 0,
297 &cylinders, &heads, &sectors) >= 0) {
298 cmos_init_hd(s, 0x19, 0x1b, cylinders, heads, sectors);
299 val |= 0xf0;
301 if (ide_get_geometry(arg->idebus[0], 1,
302 &cylinders, &heads, &sectors) >= 0) {
303 cmos_init_hd(s, 0x1a, 0x24, cylinders, heads, sectors);
304 val |= 0x0f;
306 rtc_set_memory(s, 0x12, val);
308 val = 0;
309 for (i = 0; i < 4; i++) {
310 /* NOTE: ide_get_geometry() returns the physical
311 geometry. It is always such that: 1 <= sects <= 63, 1
312 <= heads <= 16, 1 <= cylinders <= 16383. The BIOS
313 geometry can be different if a translation is done. */
314 if (ide_get_geometry(arg->idebus[i / 2], i % 2,
315 &cylinders, &heads, &sectors) >= 0) {
316 trans = ide_get_bios_chs_trans(arg->idebus[i / 2], i % 2) - 1;
317 assert((trans & ~3) == 0);
318 val |= trans << (i * 2);
321 rtc_set_memory(s, 0x39, val);
323 qemu_unregister_reset(pc_cmos_init_late, opaque);
326 void pc_cmos_init(ram_addr_t ram_size, ram_addr_t above_4g_mem_size,
327 const char *boot_device,
328 ISADevice *floppy, BusState *idebus0, BusState *idebus1,
329 ISADevice *s)
331 int val, nb, i;
332 FDriveType fd_type[2] = { FDRIVE_DRV_NONE, FDRIVE_DRV_NONE };
333 static pc_cmos_init_late_arg arg;
335 /* various important CMOS locations needed by PC/Bochs bios */
337 /* memory size */
338 /* base memory (first MiB) */
339 val = MIN(ram_size / 1024, 640);
340 rtc_set_memory(s, 0x15, val);
341 rtc_set_memory(s, 0x16, val >> 8);
342 /* extended memory (next 64MiB) */
343 if (ram_size > 1024 * 1024) {
344 val = (ram_size - 1024 * 1024) / 1024;
345 } else {
346 val = 0;
348 if (val > 65535)
349 val = 65535;
350 rtc_set_memory(s, 0x17, val);
351 rtc_set_memory(s, 0x18, val >> 8);
352 rtc_set_memory(s, 0x30, val);
353 rtc_set_memory(s, 0x31, val >> 8);
354 /* memory between 16MiB and 4GiB */
355 if (ram_size > 16 * 1024 * 1024) {
356 val = (ram_size - 16 * 1024 * 1024) / 65536;
357 } else {
358 val = 0;
360 if (val > 65535)
361 val = 65535;
362 rtc_set_memory(s, 0x34, val);
363 rtc_set_memory(s, 0x35, val >> 8);
364 /* memory above 4GiB */
365 val = above_4g_mem_size / 65536;
366 rtc_set_memory(s, 0x5b, val);
367 rtc_set_memory(s, 0x5c, val >> 8);
368 rtc_set_memory(s, 0x5d, val >> 16);
370 /* set the number of CPU */
371 rtc_set_memory(s, 0x5f, smp_cpus - 1);
373 /* set boot devices, and disable floppy signature check if requested */
374 if (set_boot_dev(s, boot_device, fd_bootchk)) {
375 exit(1);
378 /* floppy type */
379 if (floppy) {
380 for (i = 0; i < 2; i++) {
381 fd_type[i] = isa_fdc_get_drive_type(floppy, i);
384 val = (cmos_get_fd_drive_type(fd_type[0]) << 4) |
385 cmos_get_fd_drive_type(fd_type[1]);
386 rtc_set_memory(s, 0x10, val);
388 val = 0;
389 nb = 0;
390 if (fd_type[0] < FDRIVE_DRV_NONE) {
391 nb++;
393 if (fd_type[1] < FDRIVE_DRV_NONE) {
394 nb++;
396 switch (nb) {
397 case 0:
398 break;
399 case 1:
400 val |= 0x01; /* 1 drive, ready for boot */
401 break;
402 case 2:
403 val |= 0x41; /* 2 drives, ready for boot */
404 break;
406 val |= 0x02; /* FPU is there */
407 val |= 0x04; /* PS/2 mouse installed */
408 rtc_set_memory(s, REG_EQUIPMENT_BYTE, val);
410 /* hard drives */
411 arg.rtc_state = s;
412 arg.idebus[0] = idebus0;
413 arg.idebus[1] = idebus1;
414 qemu_register_reset(pc_cmos_init_late, &arg);
417 /* port 92 stuff: could be split off */
418 typedef struct Port92State {
419 ISADevice dev;
420 MemoryRegion io;
421 uint8_t outport;
422 qemu_irq *a20_out;
423 } Port92State;
425 static void port92_write(void *opaque, uint32_t addr, uint32_t val)
427 Port92State *s = opaque;
429 DPRINTF("port92: write 0x%02x\n", val);
430 s->outport = val;
431 qemu_set_irq(*s->a20_out, (val >> 1) & 1);
432 if (val & 1) {
433 qemu_system_reset_request();
437 static uint32_t port92_read(void *opaque, uint32_t addr)
439 Port92State *s = opaque;
440 uint32_t ret;
442 ret = s->outport;
443 DPRINTF("port92: read 0x%02x\n", ret);
444 return ret;
447 static void port92_init(ISADevice *dev, qemu_irq *a20_out)
449 Port92State *s = DO_UPCAST(Port92State, dev, dev);
451 s->a20_out = a20_out;
454 static const VMStateDescription vmstate_port92_isa = {
455 .name = "port92",
456 .version_id = 1,
457 .minimum_version_id = 1,
458 .minimum_version_id_old = 1,
459 .fields = (VMStateField []) {
460 VMSTATE_UINT8(outport, Port92State),
461 VMSTATE_END_OF_LIST()
465 static void port92_reset(DeviceState *d)
467 Port92State *s = container_of(d, Port92State, dev.qdev);
469 s->outport &= ~1;
472 static const MemoryRegionPortio port92_portio[] = {
473 { 0, 1, 1, .read = port92_read, .write = port92_write },
474 PORTIO_END_OF_LIST(),
477 static const MemoryRegionOps port92_ops = {
478 .old_portio = port92_portio
481 static int port92_initfn(ISADevice *dev)
483 Port92State *s = DO_UPCAST(Port92State, dev, dev);
485 memory_region_init_io(&s->io, &port92_ops, s, "port92", 1);
486 isa_register_ioport(dev, &s->io, 0x92);
488 s->outport = 0;
489 return 0;
492 static void port92_class_initfn(ObjectClass *klass, void *data)
494 DeviceClass *dc = DEVICE_CLASS(klass);
495 ISADeviceClass *ic = ISA_DEVICE_CLASS(klass);
496 ic->init = port92_initfn;
497 dc->no_user = 1;
498 dc->reset = port92_reset;
499 dc->vmsd = &vmstate_port92_isa;
502 static TypeInfo port92_info = {
503 .name = "port92",
504 .parent = TYPE_ISA_DEVICE,
505 .instance_size = sizeof(Port92State),
506 .class_init = port92_class_initfn,
509 static void port92_register_types(void)
511 type_register_static(&port92_info);
514 type_init(port92_register_types)
516 static void handle_a20_line_change(void *opaque, int irq, int level)
518 CPUX86State *cpu = opaque;
520 /* XXX: send to all CPUs ? */
521 /* XXX: add logic to handle multiple A20 line sources */
522 cpu_x86_set_a20(cpu, level);
525 /***********************************************************/
526 /* Bochs BIOS debug ports */
528 static void bochs_bios_write(void *opaque, uint32_t addr, uint32_t val)
530 static const char shutdown_str[8] = "Shutdown";
531 static int shutdown_index = 0;
533 switch(addr) {
534 case 0x8900:
535 /* same as Bochs power off */
536 if (val == shutdown_str[shutdown_index]) {
537 shutdown_index++;
538 if (shutdown_index == 8) {
539 shutdown_index = 0;
540 qemu_system_shutdown_request();
542 } else {
543 shutdown_index = 0;
545 break;
547 case 0x501:
548 case 0x502:
549 exit((val << 1) | 1);
553 int e820_add_entry(uint64_t address, uint64_t length, uint32_t type)
555 int index = le32_to_cpu(e820_table.count);
556 struct e820_entry *entry;
558 if (index >= E820_NR_ENTRIES)
559 return -EBUSY;
560 entry = &e820_table.entry[index++];
562 entry->address = cpu_to_le64(address);
563 entry->length = cpu_to_le64(length);
564 entry->type = cpu_to_le32(type);
566 e820_table.count = cpu_to_le32(index);
567 return index;
570 static void *bochs_bios_init(void)
572 void *fw_cfg;
573 uint8_t *smbios_table;
574 size_t smbios_len;
575 uint64_t *numa_fw_cfg;
576 int i, j;
578 register_ioport_write(0x8900, 1, 1, bochs_bios_write, NULL);
580 register_ioport_write(0x501, 1, 1, bochs_bios_write, NULL);
581 register_ioport_write(0x501, 1, 2, bochs_bios_write, NULL);
582 register_ioport_write(0x502, 1, 2, bochs_bios_write, NULL);
584 fw_cfg = fw_cfg_init(BIOS_CFG_IOPORT, BIOS_CFG_IOPORT + 1, 0, 0);
586 fw_cfg_add_i32(fw_cfg, FW_CFG_ID, 1);
587 fw_cfg_add_i64(fw_cfg, FW_CFG_RAM_SIZE, (uint64_t)ram_size);
588 fw_cfg_add_bytes(fw_cfg, FW_CFG_ACPI_TABLES, (uint8_t *)acpi_tables,
589 acpi_tables_len);
590 fw_cfg_add_i32(fw_cfg, FW_CFG_IRQ0_OVERRIDE, kvm_allows_irq0_override());
592 smbios_table = smbios_get_table(&smbios_len);
593 if (smbios_table)
594 fw_cfg_add_bytes(fw_cfg, FW_CFG_SMBIOS_ENTRIES,
595 smbios_table, smbios_len);
596 fw_cfg_add_bytes(fw_cfg, FW_CFG_E820_TABLE, (uint8_t *)&e820_table,
597 sizeof(struct e820_table));
599 fw_cfg_add_bytes(fw_cfg, FW_CFG_HPET, (uint8_t *)&hpet_cfg,
600 sizeof(struct hpet_fw_config));
601 /* allocate memory for the NUMA channel: one (64bit) word for the number
602 * of nodes, one word for each VCPU->node and one word for each node to
603 * hold the amount of memory.
605 numa_fw_cfg = g_malloc0((1 + max_cpus + nb_numa_nodes) * 8);
606 numa_fw_cfg[0] = cpu_to_le64(nb_numa_nodes);
607 for (i = 0; i < max_cpus; i++) {
608 for (j = 0; j < nb_numa_nodes; j++) {
609 if (test_bit(i, node_cpumask[j])) {
610 numa_fw_cfg[i + 1] = cpu_to_le64(j);
611 break;
615 for (i = 0; i < nb_numa_nodes; i++) {
616 numa_fw_cfg[max_cpus + 1 + i] = cpu_to_le64(node_mem[i]);
618 fw_cfg_add_bytes(fw_cfg, FW_CFG_NUMA, (uint8_t *)numa_fw_cfg,
619 (1 + max_cpus + nb_numa_nodes) * 8);
621 return fw_cfg;
624 static long get_file_size(FILE *f)
626 long where, size;
628 /* XXX: on Unix systems, using fstat() probably makes more sense */
630 where = ftell(f);
631 fseek(f, 0, SEEK_END);
632 size = ftell(f);
633 fseek(f, where, SEEK_SET);
635 return size;
638 static void load_linux(void *fw_cfg,
639 const char *kernel_filename,
640 const char *initrd_filename,
641 const char *kernel_cmdline,
642 target_phys_addr_t max_ram_size)
644 uint16_t protocol;
645 int setup_size, kernel_size, initrd_size = 0, cmdline_size;
646 uint32_t initrd_max;
647 uint8_t header[8192], *setup, *kernel, *initrd_data;
648 target_phys_addr_t real_addr, prot_addr, cmdline_addr, initrd_addr = 0;
649 FILE *f;
650 char *vmode;
652 /* Align to 16 bytes as a paranoia measure */
653 cmdline_size = (strlen(kernel_cmdline)+16) & ~15;
655 /* load the kernel header */
656 f = fopen(kernel_filename, "rb");
657 if (!f || !(kernel_size = get_file_size(f)) ||
658 fread(header, 1, MIN(ARRAY_SIZE(header), kernel_size), f) !=
659 MIN(ARRAY_SIZE(header), kernel_size)) {
660 fprintf(stderr, "qemu: could not load kernel '%s': %s\n",
661 kernel_filename, strerror(errno));
662 exit(1);
665 /* kernel protocol version */
666 #if 0
667 fprintf(stderr, "header magic: %#x\n", ldl_p(header+0x202));
668 #endif
669 if (ldl_p(header+0x202) == 0x53726448)
670 protocol = lduw_p(header+0x206);
671 else {
672 /* This looks like a multiboot kernel. If it is, let's stop
673 treating it like a Linux kernel. */
674 if (load_multiboot(fw_cfg, f, kernel_filename, initrd_filename,
675 kernel_cmdline, kernel_size, header))
676 return;
677 protocol = 0;
680 if (protocol < 0x200 || !(header[0x211] & 0x01)) {
681 /* Low kernel */
682 real_addr = 0x90000;
683 cmdline_addr = 0x9a000 - cmdline_size;
684 prot_addr = 0x10000;
685 } else if (protocol < 0x202) {
686 /* High but ancient kernel */
687 real_addr = 0x90000;
688 cmdline_addr = 0x9a000 - cmdline_size;
689 prot_addr = 0x100000;
690 } else {
691 /* High and recent kernel */
692 real_addr = 0x10000;
693 cmdline_addr = 0x20000;
694 prot_addr = 0x100000;
697 #if 0
698 fprintf(stderr,
699 "qemu: real_addr = 0x" TARGET_FMT_plx "\n"
700 "qemu: cmdline_addr = 0x" TARGET_FMT_plx "\n"
701 "qemu: prot_addr = 0x" TARGET_FMT_plx "\n",
702 real_addr,
703 cmdline_addr,
704 prot_addr);
705 #endif
707 /* highest address for loading the initrd */
708 if (protocol >= 0x203)
709 initrd_max = ldl_p(header+0x22c);
710 else
711 initrd_max = 0x37ffffff;
713 if (initrd_max >= max_ram_size-ACPI_DATA_SIZE)
714 initrd_max = max_ram_size-ACPI_DATA_SIZE-1;
716 fw_cfg_add_i32(fw_cfg, FW_CFG_CMDLINE_ADDR, cmdline_addr);
717 fw_cfg_add_i32(fw_cfg, FW_CFG_CMDLINE_SIZE, strlen(kernel_cmdline)+1);
718 fw_cfg_add_bytes(fw_cfg, FW_CFG_CMDLINE_DATA,
719 (uint8_t*)strdup(kernel_cmdline),
720 strlen(kernel_cmdline)+1);
722 if (protocol >= 0x202) {
723 stl_p(header+0x228, cmdline_addr);
724 } else {
725 stw_p(header+0x20, 0xA33F);
726 stw_p(header+0x22, cmdline_addr-real_addr);
729 /* handle vga= parameter */
730 vmode = strstr(kernel_cmdline, "vga=");
731 if (vmode) {
732 unsigned int video_mode;
733 /* skip "vga=" */
734 vmode += 4;
735 if (!strncmp(vmode, "normal", 6)) {
736 video_mode = 0xffff;
737 } else if (!strncmp(vmode, "ext", 3)) {
738 video_mode = 0xfffe;
739 } else if (!strncmp(vmode, "ask", 3)) {
740 video_mode = 0xfffd;
741 } else {
742 video_mode = strtol(vmode, NULL, 0);
744 stw_p(header+0x1fa, video_mode);
747 /* loader type */
748 /* High nybble = B reserved for QEMU; low nybble is revision number.
749 If this code is substantially changed, you may want to consider
750 incrementing the revision. */
751 if (protocol >= 0x200)
752 header[0x210] = 0xB0;
754 /* heap */
755 if (protocol >= 0x201) {
756 header[0x211] |= 0x80; /* CAN_USE_HEAP */
757 stw_p(header+0x224, cmdline_addr-real_addr-0x200);
760 /* load initrd */
761 if (initrd_filename) {
762 if (protocol < 0x200) {
763 fprintf(stderr, "qemu: linux kernel too old to load a ram disk\n");
764 exit(1);
767 initrd_size = get_image_size(initrd_filename);
768 if (initrd_size < 0) {
769 fprintf(stderr, "qemu: error reading initrd %s\n",
770 initrd_filename);
771 exit(1);
774 initrd_addr = (initrd_max-initrd_size) & ~4095;
776 initrd_data = g_malloc(initrd_size);
777 load_image(initrd_filename, initrd_data);
779 fw_cfg_add_i32(fw_cfg, FW_CFG_INITRD_ADDR, initrd_addr);
780 fw_cfg_add_i32(fw_cfg, FW_CFG_INITRD_SIZE, initrd_size);
781 fw_cfg_add_bytes(fw_cfg, FW_CFG_INITRD_DATA, initrd_data, initrd_size);
783 stl_p(header+0x218, initrd_addr);
784 stl_p(header+0x21c, initrd_size);
787 /* load kernel and setup */
788 setup_size = header[0x1f1];
789 if (setup_size == 0)
790 setup_size = 4;
791 setup_size = (setup_size+1)*512;
792 kernel_size -= setup_size;
794 setup = g_malloc(setup_size);
795 kernel = g_malloc(kernel_size);
796 fseek(f, 0, SEEK_SET);
797 if (fread(setup, 1, setup_size, f) != setup_size) {
798 fprintf(stderr, "fread() failed\n");
799 exit(1);
801 if (fread(kernel, 1, kernel_size, f) != kernel_size) {
802 fprintf(stderr, "fread() failed\n");
803 exit(1);
805 fclose(f);
806 memcpy(setup, header, MIN(sizeof(header), setup_size));
808 fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_ADDR, prot_addr);
809 fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_SIZE, kernel_size);
810 fw_cfg_add_bytes(fw_cfg, FW_CFG_KERNEL_DATA, kernel, kernel_size);
812 fw_cfg_add_i32(fw_cfg, FW_CFG_SETUP_ADDR, real_addr);
813 fw_cfg_add_i32(fw_cfg, FW_CFG_SETUP_SIZE, setup_size);
814 fw_cfg_add_bytes(fw_cfg, FW_CFG_SETUP_DATA, setup, setup_size);
816 option_rom[nb_option_roms].name = "linuxboot.bin";
817 option_rom[nb_option_roms].bootindex = 0;
818 nb_option_roms++;
821 #define NE2000_NB_MAX 6
823 static const int ne2000_io[NE2000_NB_MAX] = { 0x300, 0x320, 0x340, 0x360,
824 0x280, 0x380 };
825 static const int ne2000_irq[NE2000_NB_MAX] = { 9, 10, 11, 3, 4, 5 };
827 static const int parallel_io[MAX_PARALLEL_PORTS] = { 0x378, 0x278, 0x3bc };
828 static const int parallel_irq[MAX_PARALLEL_PORTS] = { 7, 7, 7 };
830 void pc_init_ne2k_isa(ISABus *bus, NICInfo *nd)
832 static int nb_ne2k = 0;
834 if (nb_ne2k == NE2000_NB_MAX)
835 return;
836 isa_ne2000_init(bus, ne2000_io[nb_ne2k],
837 ne2000_irq[nb_ne2k], nd);
838 nb_ne2k++;
841 DeviceState *cpu_get_current_apic(void)
843 if (cpu_single_env) {
844 return cpu_single_env->apic_state;
845 } else {
846 return NULL;
850 static DeviceState *apic_init(void *env, uint8_t apic_id)
852 DeviceState *dev;
853 static int apic_mapped;
855 if (kvm_irqchip_in_kernel()) {
856 dev = qdev_create(NULL, "kvm-apic");
857 } else if (xen_enabled()) {
858 dev = qdev_create(NULL, "xen-apic");
859 } else {
860 dev = qdev_create(NULL, "apic");
863 qdev_prop_set_uint8(dev, "id", apic_id);
864 qdev_prop_set_ptr(dev, "cpu_env", env);
865 qdev_init_nofail(dev);
867 /* XXX: mapping more APICs at the same memory location */
868 if (apic_mapped == 0) {
869 /* NOTE: the APIC is directly connected to the CPU - it is not
870 on the global memory bus. */
871 /* XXX: what if the base changes? */
872 sysbus_mmio_map(sysbus_from_qdev(dev), 0, MSI_ADDR_BASE);
873 apic_mapped = 1;
876 return dev;
879 void pc_acpi_smi_interrupt(void *opaque, int irq, int level)
881 CPUX86State *s = opaque;
883 if (level) {
884 cpu_interrupt(s, CPU_INTERRUPT_SMI);
888 static X86CPU *pc_new_cpu(const char *cpu_model)
890 X86CPU *cpu;
891 CPUX86State *env;
893 cpu = cpu_x86_init(cpu_model);
894 if (cpu == NULL) {
895 fprintf(stderr, "Unable to find x86 CPU definition\n");
896 exit(1);
898 env = &cpu->env;
899 if ((env->cpuid_features & CPUID_APIC) || smp_cpus > 1) {
900 env->apic_state = apic_init(env, env->cpuid_apic_id);
902 cpu_reset(CPU(cpu));
903 return cpu;
906 void pc_cpus_init(const char *cpu_model)
908 int i;
910 /* init CPUs */
911 if (cpu_model == NULL) {
912 #ifdef TARGET_X86_64
913 cpu_model = "qemu64";
914 #else
915 cpu_model = "qemu32";
916 #endif
919 for(i = 0; i < smp_cpus; i++) {
920 pc_new_cpu(cpu_model);
924 void *pc_memory_init(MemoryRegion *system_memory,
925 const char *kernel_filename,
926 const char *kernel_cmdline,
927 const char *initrd_filename,
928 ram_addr_t below_4g_mem_size,
929 ram_addr_t above_4g_mem_size,
930 MemoryRegion *rom_memory,
931 MemoryRegion **ram_memory)
933 int linux_boot, i;
934 MemoryRegion *ram, *option_rom_mr;
935 MemoryRegion *ram_below_4g, *ram_above_4g;
936 void *fw_cfg;
938 linux_boot = (kernel_filename != NULL);
940 /* Allocate RAM. We allocate it as a single memory region and use
941 * aliases to address portions of it, mostly for backwards compatibility
942 * with older qemus that used qemu_ram_alloc().
944 ram = g_malloc(sizeof(*ram));
945 memory_region_init_ram(ram, "pc.ram",
946 below_4g_mem_size + above_4g_mem_size);
947 vmstate_register_ram_global(ram);
948 *ram_memory = ram;
949 ram_below_4g = g_malloc(sizeof(*ram_below_4g));
950 memory_region_init_alias(ram_below_4g, "ram-below-4g", ram,
951 0, below_4g_mem_size);
952 memory_region_add_subregion(system_memory, 0, ram_below_4g);
953 if (above_4g_mem_size > 0) {
954 ram_above_4g = g_malloc(sizeof(*ram_above_4g));
955 memory_region_init_alias(ram_above_4g, "ram-above-4g", ram,
956 below_4g_mem_size, above_4g_mem_size);
957 memory_region_add_subregion(system_memory, 0x100000000ULL,
958 ram_above_4g);
962 /* Initialize PC system firmware */
963 pc_system_firmware_init(rom_memory);
965 option_rom_mr = g_malloc(sizeof(*option_rom_mr));
966 memory_region_init_ram(option_rom_mr, "pc.rom", PC_ROM_SIZE);
967 vmstate_register_ram_global(option_rom_mr);
968 memory_region_add_subregion_overlap(rom_memory,
969 PC_ROM_MIN_VGA,
970 option_rom_mr,
973 fw_cfg = bochs_bios_init();
974 rom_set_fw(fw_cfg);
976 if (linux_boot) {
977 load_linux(fw_cfg, kernel_filename, initrd_filename, kernel_cmdline, below_4g_mem_size);
980 for (i = 0; i < nb_option_roms; i++) {
981 rom_add_option(option_rom[i].name, option_rom[i].bootindex);
983 return fw_cfg;
986 qemu_irq *pc_allocate_cpu_irq(void)
988 return qemu_allocate_irqs(pic_irq_request, NULL, 1);
991 DeviceState *pc_vga_init(ISABus *isa_bus, PCIBus *pci_bus)
993 DeviceState *dev = NULL;
995 if (cirrus_vga_enabled) {
996 if (pci_bus) {
997 dev = pci_cirrus_vga_init(pci_bus);
998 } else {
999 dev = &isa_create_simple(isa_bus, "isa-cirrus-vga")->qdev;
1001 } else if (vmsvga_enabled) {
1002 if (pci_bus) {
1003 dev = pci_vmsvga_init(pci_bus);
1004 } else {
1005 fprintf(stderr, "%s: vmware_vga: no PCI bus\n", __FUNCTION__);
1007 #ifdef CONFIG_SPICE
1008 } else if (qxl_enabled) {
1009 if (pci_bus) {
1010 dev = &pci_create_simple(pci_bus, -1, "qxl-vga")->qdev;
1011 } else {
1012 fprintf(stderr, "%s: qxl: no PCI bus\n", __FUNCTION__);
1014 #endif
1015 } else if (std_vga_enabled) {
1016 if (pci_bus) {
1017 dev = pci_vga_init(pci_bus);
1018 } else {
1019 dev = isa_vga_init(isa_bus);
1023 return dev;
1026 static void cpu_request_exit(void *opaque, int irq, int level)
1028 CPUX86State *env = cpu_single_env;
1030 if (env && level) {
1031 cpu_exit(env);
1035 void pc_basic_device_init(ISABus *isa_bus, qemu_irq *gsi,
1036 ISADevice **rtc_state,
1037 ISADevice **floppy,
1038 bool no_vmport)
1040 int i;
1041 DriveInfo *fd[MAX_FD];
1042 DeviceState *hpet = NULL;
1043 int pit_isa_irq = 0;
1044 qemu_irq pit_alt_irq = NULL;
1045 qemu_irq rtc_irq = NULL;
1046 qemu_irq *a20_line;
1047 ISADevice *i8042, *port92, *vmmouse, *pit = NULL;
1048 qemu_irq *cpu_exit_irq;
1050 register_ioport_write(0x80, 1, 1, ioport80_write, NULL);
1052 register_ioport_write(0xf0, 1, 1, ioportF0_write, NULL);
1055 * Check if an HPET shall be created.
1057 * Without KVM_CAP_PIT_STATE2, we cannot switch off the in-kernel PIT
1058 * when the HPET wants to take over. Thus we have to disable the latter.
1060 if (!no_hpet && (!kvm_irqchip_in_kernel() || kvm_has_pit_state2())) {
1061 hpet = sysbus_try_create_simple("hpet", HPET_BASE, NULL);
1063 if (hpet) {
1064 for (i = 0; i < GSI_NUM_PINS; i++) {
1065 sysbus_connect_irq(sysbus_from_qdev(hpet), i, gsi[i]);
1067 pit_isa_irq = -1;
1068 pit_alt_irq = qdev_get_gpio_in(hpet, HPET_LEGACY_PIT_INT);
1069 rtc_irq = qdev_get_gpio_in(hpet, HPET_LEGACY_RTC_INT);
1072 *rtc_state = rtc_init(isa_bus, 2000, rtc_irq);
1074 qemu_register_boot_set(pc_boot_set, *rtc_state);
1076 if (!xen_enabled()) {
1077 if (kvm_irqchip_in_kernel()) {
1078 pit = kvm_pit_init(isa_bus, 0x40);
1079 } else {
1080 pit = pit_init(isa_bus, 0x40, pit_isa_irq, pit_alt_irq);
1082 if (hpet) {
1083 /* connect PIT to output control line of the HPET */
1084 qdev_connect_gpio_out(hpet, 0, qdev_get_gpio_in(&pit->qdev, 0));
1086 pcspk_init(isa_bus, pit);
1089 for(i = 0; i < MAX_SERIAL_PORTS; i++) {
1090 if (serial_hds[i]) {
1091 serial_isa_init(isa_bus, i, serial_hds[i]);
1095 for(i = 0; i < MAX_PARALLEL_PORTS; i++) {
1096 if (parallel_hds[i]) {
1097 parallel_init(isa_bus, i, parallel_hds[i]);
1101 a20_line = qemu_allocate_irqs(handle_a20_line_change, first_cpu, 2);
1102 i8042 = isa_create_simple(isa_bus, "i8042");
1103 i8042_setup_a20_line(i8042, &a20_line[0]);
1104 if (!no_vmport) {
1105 vmport_init(isa_bus);
1106 vmmouse = isa_try_create(isa_bus, "vmmouse");
1107 } else {
1108 vmmouse = NULL;
1110 if (vmmouse) {
1111 qdev_prop_set_ptr(&vmmouse->qdev, "ps2_mouse", i8042);
1112 qdev_init_nofail(&vmmouse->qdev);
1114 port92 = isa_create_simple(isa_bus, "port92");
1115 port92_init(port92, &a20_line[1]);
1117 cpu_exit_irq = qemu_allocate_irqs(cpu_request_exit, NULL, 1);
1118 DMA_init(0, cpu_exit_irq);
1120 for(i = 0; i < MAX_FD; i++) {
1121 fd[i] = drive_get(IF_FLOPPY, 0, i);
1123 *floppy = fdctrl_init_isa(isa_bus, fd);
1126 void pc_pci_device_init(PCIBus *pci_bus)
1128 int max_bus;
1129 int bus;
1131 max_bus = drive_get_max_bus(IF_SCSI);
1132 for (bus = 0; bus <= max_bus; bus++) {
1133 pci_create_simple(pci_bus, -1, "lsi53c895a");