hw/versatilepb.c

   1 /*
   2  * ARM Versatile Platform/Application Baseboard System emulation.
   3  *
   4  * Copyright (c) 2005-2007 CodeSourcery.
   5  * Written by Paul Brook
   6  *
   7  * This code is licenced under the GPL.
   8  */
   9
  10 #include "sysbus.h"
  11 #include "arm-misc.h"
  12 #include "primecell.h"
  13 #include "devices.h"
  14 #include "net.h"
  15 #include "sysemu.h"
  16 #include "pci.h"
  17 #include "boards.h"
  18
  19 /* Primary interrupt controller.  */
  20
  21 typedef struct vpb_sic_state
  22 {
  23   SysBusDevice busdev;
  24   uint32_t level;
  25   uint32_t mask;
  26   uint32_t pic_enable;
  27   qemu_irq parent[32];
  28   int irq;
  29 } vpb_sic_state;
  30
  31 static void vpb_sic_update(vpb_sic_state *s)
  32 {
  33     uint32_t flags;
  34
  35     flags = s->level & s->mask;
  36     qemu_set_irq(s->parent[s->irq], flags != 0);
  37 }
  38
  39 static void vpb_sic_update_pic(vpb_sic_state *s)
  40 {
  41     int i;
  42     uint32_t mask;
  43
  44     for (i = 21; i <= 30; i++) {
  45         mask = 1u << i;
  46         if (!(s->pic_enable & mask))
  47             continue;
  48         qemu_set_irq(s->parent[i], (s->level & mask) != 0);
  49     }
  50 }
  51
  52 static void vpb_sic_set_irq(void *opaque, int irq, int level)
  53 {
  54     vpb_sic_state *s = (vpb_sic_state *)opaque;
  55     if (level)
  56         s->level |= 1u << irq;
  57     else
  58         s->level &= ~(1u << irq);
  59     if (s->pic_enable & (1u << irq))
  60         qemu_set_irq(s->parent[irq], level);
  61     vpb_sic_update(s);
  62 }
  63
  64 static uint32_t vpb_sic_read(void *opaque, target_phys_addr_t offset)
  65 {
  66     vpb_sic_state *s = (vpb_sic_state *)opaque;
  67
  68     switch (offset >> 2) {
  69     case 0: /* STATUS */
  70         return s->level & s->mask;
  71     case 1: /* RAWSTAT */
  72         return s->level;
  73     case 2: /* ENABLE */
  74         return s->mask;
  75     case 4: /* SOFTINT */
  76         return s->level & 1;
  77     case 8: /* PICENABLE */
  78         return s->pic_enable;
  79     default:
  80         printf ("vpb_sic_read: Bad register offset 0x%x\n", (int)offset);
  81         return 0;
  82     }
  83 }
  84
  85 static void vpb_sic_write(void *opaque, target_phys_addr_t offset,
  86                           uint32_t value)
  87 {
  88     vpb_sic_state *s = (vpb_sic_state *)opaque;
  89
  90     switch (offset >> 2) {
  91     case 2: /* ENSET */
  92         s->mask |= value;
  93         break;
  94     case 3: /* ENCLR */
  95         s->mask &= ~value;
  96         break;
  97     case 4: /* SOFTINTSET */
  98         if (value)
  99             s->mask |= 1;
 100         break;
 101     case 5: /* SOFTINTCLR */
 102         if (value)
 103             s->mask &= ~1u;
 104         break;
 105     case 8: /* PICENSET */
 106         s->pic_enable |= (value & 0x7fe00000);
 107         vpb_sic_update_pic(s);
 108         break;
 109     case 9: /* PICENCLR */
 110         s->pic_enable &= ~value;
 111         vpb_sic_update_pic(s);
 112         break;
 113     default:
 114         printf ("vpb_sic_write: Bad register offset 0x%x\n", (int)offset);
 115         return;
 116     }
 117     vpb_sic_update(s);
 118 }
 119
 120 static CPUReadMemoryFunc * const vpb_sic_readfn[] = {
 121    vpb_sic_read,
 122    vpb_sic_read,
 123    vpb_sic_read
 124 };
 125
 126 static CPUWriteMemoryFunc * const vpb_sic_writefn[] = {
 127    vpb_sic_write,
 128    vpb_sic_write,
 129    vpb_sic_write
 130 };
 131
 132 static int vpb_sic_init(SysBusDevice *dev)
 133 {
 134     vpb_sic_state *s = FROM_SYSBUS(vpb_sic_state, dev);
 135     int iomemtype;
 136     int i;
 137
 138     qdev_init_gpio_in(&dev->qdev, vpb_sic_set_irq, 32);
 139     for (i = 0; i < 32; i++) {
 140         sysbus_init_irq(dev, &s->parent[i]);
 141     }
 142     s->irq = 31;
 143     iomemtype = cpu_register_io_memory(vpb_sic_readfn,
 144                                        vpb_sic_writefn, s);
 145     sysbus_init_mmio(dev, 0x1000, iomemtype);
 146     /* ??? Save/restore.  */
 147     return 0;
 148 }
 149
 150 /* Board init.  */
 151
 152 /* The AB and PB boards both use the same core, just with different
 153    peripherans and expansion busses.  For now we emulate a subset of the
 154    PB peripherals and just change the board ID.  */
 155
 156 static struct arm_boot_info versatile_binfo;
 157
 158 static void versatile_init(ram_addr_t ram_size,
 159                      const char *boot_device,
 160                      const char *kernel_filename, const char *kernel_cmdline,
 161                      const char *initrd_filename, const char *cpu_model,
 162                      int board_id)
 163 {
 164     CPUState *env;
 165     ram_addr_t ram_offset;
 166     qemu_irq *cpu_pic;
 167     qemu_irq pic[32];
 168     qemu_irq sic[32];
 169     DeviceState *dev;
 170     PCIBus *pci_bus;
 171     NICInfo *nd;
 172     int n;
 173     int done_smc = 0;
 174
 175     if (!cpu_model)
 176         cpu_model = "arm926";
 177     env = cpu_init(cpu_model);
 178     if (!env) {
 179         fprintf(stderr, "Unable to find CPU definition\n");
 180         exit(1);
 181     }
 182     ram_offset = qemu_ram_alloc(ram_size);
 183     /* ??? RAM should repeat to fill physical memory space.  */
 184     /* SDRAM at address zero.  */
 185     cpu_register_physical_memory(0, ram_size, ram_offset | IO_MEM_RAM);
 186
 187     arm_sysctl_init(0x10000000, 0x41007004);
 188     cpu_pic = arm_pic_init_cpu(env);
 189     dev = sysbus_create_varargs("pl190", 0x10140000,
 190                                 cpu_pic[0], cpu_pic[1], NULL);
 191     for (n = 0; n < 32; n++) {
 192         pic[n] = qdev_get_gpio_in(dev, n);
 193     }
 194     dev = sysbus_create_simple("versatilepb_sic", 0x10003000, NULL);
 195     for (n = 0; n < 32; n++) {
 196         sysbus_connect_irq(sysbus_from_qdev(dev), n, pic[n]);
 197         sic[n] = qdev_get_gpio_in(dev, n);
 198     }
 199
 200     sysbus_create_simple("pl050_keyboard", 0x10006000, sic[3]);
 201     sysbus_create_simple("pl050_mouse", 0x10007000, sic[4]);
 202
 203     dev = sysbus_create_varargs("versatile_pci", 0x40000000,
 204                                 sic[27], sic[28], sic[29], sic[30], NULL);
 205     pci_bus = (PCIBus *)qdev_get_child_bus(dev, "pci");
 206
 207     /* The Versatile PCI bridge does not provide access to PCI IO space,
 208        so many of the qemu PCI devices are not useable.  */
 209     for(n = 0; n < nb_nics; n++) {
 210         nd = &nd_table[n];
 211
 212         if ((!nd->model && !done_smc) || strcmp(nd->model, "smc91c111") == 0) {
 213             smc91c111_init(nd, 0x10010000, sic[25]);
 214             done_smc = 1;
 215         } else {
 216             pci_nic_init_nofail(nd, "rtl8139", NULL);
 217         }
 218     }
 219     if (usb_enabled) {
 220         usb_ohci_init_pci(pci_bus, -1);
 221     }
 222     n = drive_get_max_bus(IF_SCSI);
 223     while (n >= 0) {
 224         pci_create_simple(pci_bus, -1, "lsi53c895a");
 225         n--;
 226     }
 227
 228     sysbus_create_simple("pl011", 0x101f1000, pic[12]);
 229     sysbus_create_simple("pl011", 0x101f2000, pic[13]);
 230     sysbus_create_simple("pl011", 0x101f3000, pic[14]);
 231     sysbus_create_simple("pl011", 0x10009000, sic[6]);
 232
 233     sysbus_create_simple("pl080", 0x10130000, pic[17]);
 234     sysbus_create_simple("sp804", 0x101e2000, pic[4]);
 235     sysbus_create_simple("sp804", 0x101e3000, pic[5]);
 236
 237     /* The versatile/PB actually has a modified Color LCD controller
 238        that includes hardware cursor support from the PL111.  */
 239     sysbus_create_simple("pl110_versatile", 0x10120000, pic[16]);
 240
 241     sysbus_create_varargs("pl181", 0x10005000, sic[22], sic[1], NULL);
 242     sysbus_create_varargs("pl181", 0x1000b000, sic[23], sic[2], NULL);
 243
 244     /* Add PL031 Real Time Clock. */
 245     sysbus_create_simple("pl031", 0x101e8000, pic[10]);
 246
 247     /* Memory map for Versatile/PB:  */
 248     /* 0x10000000 System registers.  */
 249     /* 0x10001000 PCI controller config registers.  */
 250     /* 0x10002000 Serial bus interface.  */
 251     /*  0x10003000 Secondary interrupt controller.  */
 252     /* 0x10004000 AACI (audio).  */
 253     /*  0x10005000 MMCI0.  */
 254     /*  0x10006000 KMI0 (keyboard).  */
 255     /*  0x10007000 KMI1 (mouse).  */
 256     /* 0x10008000 Character LCD Interface.  */
 257     /*  0x10009000 UART3.  */
 258     /* 0x1000a000 Smart card 1.  */
 259     /*  0x1000b000 MMCI1.  */
 260     /*  0x10010000 Ethernet.  */
 261     /* 0x10020000 USB.  */
 262     /* 0x10100000 SSMC.  */
 263     /* 0x10110000 MPMC.  */
 264     /*  0x10120000 CLCD Controller.  */
 265     /*  0x10130000 DMA Controller.  */
 266     /*  0x10140000 Vectored interrupt controller.  */
 267     /* 0x101d0000 AHB Monitor Interface.  */
 268     /* 0x101e0000 System Controller.  */
 269     /* 0x101e1000 Watchdog Interface.  */
 270     /* 0x101e2000 Timer 0/1.  */
 271     /* 0x101e3000 Timer 2/3.  */
 272     /* 0x101e4000 GPIO port 0.  */
 273     /* 0x101e5000 GPIO port 1.  */
 274     /* 0x101e6000 GPIO port 2.  */
 275     /* 0x101e7000 GPIO port 3.  */
 276     /* 0x101e8000 RTC.  */
 277     /* 0x101f0000 Smart card 0.  */
 278     /*  0x101f1000 UART0.  */
 279     /*  0x101f2000 UART1.  */
 280     /*  0x101f3000 UART2.  */
 281     /* 0x101f4000 SSPI.  */
 282
 283     versatile_binfo.ram_size = ram_size;
 284     versatile_binfo.kernel_filename = kernel_filename;
 285     versatile_binfo.kernel_cmdline = kernel_cmdline;
 286     versatile_binfo.initrd_filename = initrd_filename;
 287     versatile_binfo.board_id = board_id;
 288     arm_load_kernel(env, &versatile_binfo);
 289 }
 290
 291 static void vpb_init(ram_addr_t ram_size,
 292                      const char *boot_device,
 293                      const char *kernel_filename, const char *kernel_cmdline,
 294                      const char *initrd_filename, const char *cpu_model)
 295 {
 296     versatile_init(ram_size,
 297                    boot_device,
 298                    kernel_filename, kernel_cmdline,
 299                    initrd_filename, cpu_model, 0x183);
 300 }
 301
 302 static void vab_init(ram_addr_t ram_size,
 303                      const char *boot_device,
 304                      const char *kernel_filename, const char *kernel_cmdline,
 305                      const char *initrd_filename, const char *cpu_model)
 306 {
 307     versatile_init(ram_size,
 308                    boot_device,
 309                    kernel_filename, kernel_cmdline,
 310                    initrd_filename, cpu_model, 0x25e);
 311 }
 312
 313 static QEMUMachine versatilepb_machine = {
 314     .name = "versatilepb",
 315     .desc = "ARM Versatile/PB (ARM926EJ-S)",
 316     .init = vpb_init,
 317     .use_scsi = 1,
 318 };
 319
 320 static QEMUMachine versatileab_machine = {
 321     .name = "versatileab",
 322     .desc = "ARM Versatile/AB (ARM926EJ-S)",
 323     .init = vab_init,
 324     .use_scsi = 1,
 325 };
 326
 327 static void versatile_machine_init(void)
 328 {
 329     qemu_register_machine(&versatilepb_machine);
 330     qemu_register_machine(&versatileab_machine);
 331 }
 332
 333 machine_init(versatile_machine_init);
 334
 335 static void versatilepb_register_devices(void)
 336 {
 337     sysbus_register_dev("versatilepb_sic", sizeof(vpb_sic_state),
 338                         vpb_sic_init);
 339 }
 340
 341 device_init(versatilepb_register_devices)