2 * QEMU PC System Emulator
4 * Copyright (c) 2003-2004 Fabrice Bellard
6 * Permission is hereby granted, free of charge, to any person obtaining a copy
7 * of this software and associated documentation files (the "Software"), to deal
8 * in the Software without restriction, including without limitation the rights
9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10 * copies of the Software, and to permit persons to whom the Software is
11 * furnished to do so, subject to the following conditions:
13 * The above copyright notice and this permission notice shall be included in
14 * all copies or substantial portions of the Software.
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
30 #include "audio/audio.h"
36 #include "hpet_emul.h"
41 /* output Bochs bios info messages */
44 /* Show multiboot debug output */
45 //#define DEBUG_MULTIBOOT
47 #define BIOS_FILENAME "bios.bin"
48 #define VGABIOS_FILENAME "vgabios.bin"
49 #define VGABIOS_CIRRUS_FILENAME "vgabios-cirrus.bin"
51 #define PC_MAX_BIOS_SIZE (4 * 1024 * 1024)
53 /* Leave a chunk of memory at the top of RAM for the BIOS ACPI tables. */
54 #define ACPI_DATA_SIZE 0x10000
55 #define BIOS_CFG_IOPORT 0x510
56 #define FW_CFG_ACPI_TABLES (FW_CFG_ARCH_LOCAL + 0)
57 #define FW_CFG_SMBIOS_ENTRIES (FW_CFG_ARCH_LOCAL + 1)
58 #define FW_CFG_IRQ0_OVERRIDE (FW_CFG_ARCH_LOCAL + 2)
62 static fdctrl_t
*floppy_controller
;
63 static RTCState
*rtc_state
;
65 static PCIDevice
*i440fx_state
;
67 typedef struct rom_reset_data
{
69 target_phys_addr_t addr
;
73 static void option_rom_reset(void *_rrd
)
75 RomResetData
*rrd
= _rrd
;
77 cpu_physical_memory_write_rom(rrd
->addr
, rrd
->data
, rrd
->size
);
80 static void option_rom_setup_reset(target_phys_addr_t addr
, unsigned size
)
82 RomResetData
*rrd
= qemu_malloc(sizeof *rrd
);
84 rrd
->data
= qemu_malloc(size
);
85 cpu_physical_memory_read(addr
, rrd
->data
, size
);
88 qemu_register_reset(option_rom_reset
, rrd
);
91 typedef struct isa_irq_state
{
96 static void isa_irq_handler(void *opaque
, int n
, int level
)
98 IsaIrqState
*isa
= (IsaIrqState
*)opaque
;
101 qemu_set_irq(isa
->i8259
[n
], level
);
103 qemu_set_irq(isa
->ioapic
[n
], level
);
106 static void ioport80_write(void *opaque
, uint32_t addr
, uint32_t data
)
110 /* MSDOS compatibility mode FPU exception support */
111 static qemu_irq ferr_irq
;
112 /* XXX: add IGNNE support */
113 void cpu_set_ferr(CPUX86State
*s
)
115 qemu_irq_raise(ferr_irq
);
118 static void ioportF0_write(void *opaque
, uint32_t addr
, uint32_t data
)
120 qemu_irq_lower(ferr_irq
);
124 uint64_t cpu_get_tsc(CPUX86State
*env
)
126 return cpu_get_ticks();
130 void cpu_smm_update(CPUState
*env
)
132 if (i440fx_state
&& env
== first_cpu
)
133 i440fx_set_smm(i440fx_state
, (env
->hflags
>> HF_SMM_SHIFT
) & 1);
138 int cpu_get_pic_interrupt(CPUState
*env
)
142 intno
= apic_get_interrupt(env
);
144 /* set irq request if a PIC irq is still pending */
145 /* XXX: improve that */
146 pic_update_irq(isa_pic
);
149 /* read the irq from the PIC */
150 if (!apic_accept_pic_intr(env
))
153 intno
= pic_read_irq(isa_pic
);
157 static void pic_irq_request(void *opaque
, int irq
, int level
)
159 CPUState
*env
= first_cpu
;
161 if (env
->apic_state
) {
163 if (apic_accept_pic_intr(env
))
164 apic_deliver_pic_intr(env
, level
);
169 cpu_interrupt(env
, CPU_INTERRUPT_HARD
);
171 cpu_reset_interrupt(env
, CPU_INTERRUPT_HARD
);
175 /* PC cmos mappings */
177 #define REG_EQUIPMENT_BYTE 0x14
179 static int cmos_get_fd_drive_type(int fd0
)
185 /* 1.44 Mb 3"5 drive */
189 /* 2.88 Mb 3"5 drive */
193 /* 1.2 Mb 5"5 drive */
203 static void cmos_init_hd(int type_ofs
, int info_ofs
, BlockDriverState
*hd
)
205 RTCState
*s
= rtc_state
;
206 int cylinders
, heads
, sectors
;
207 bdrv_get_geometry_hint(hd
, &cylinders
, &heads
, §ors
);
208 rtc_set_memory(s
, type_ofs
, 47);
209 rtc_set_memory(s
, info_ofs
, cylinders
);
210 rtc_set_memory(s
, info_ofs
+ 1, cylinders
>> 8);
211 rtc_set_memory(s
, info_ofs
+ 2, heads
);
212 rtc_set_memory(s
, info_ofs
+ 3, 0xff);
213 rtc_set_memory(s
, info_ofs
+ 4, 0xff);
214 rtc_set_memory(s
, info_ofs
+ 5, 0xc0 | ((heads
> 8) << 3));
215 rtc_set_memory(s
, info_ofs
+ 6, cylinders
);
216 rtc_set_memory(s
, info_ofs
+ 7, cylinders
>> 8);
217 rtc_set_memory(s
, info_ofs
+ 8, sectors
);
220 /* convert boot_device letter to something recognizable by the bios */
221 static int boot_device2nibble(char boot_device
)
223 switch(boot_device
) {
226 return 0x01; /* floppy boot */
228 return 0x02; /* hard drive boot */
230 return 0x03; /* CD-ROM boot */
232 return 0x04; /* Network boot */
237 /* copy/pasted from cmos_init, should be made a general function
238 and used there as well */
239 static int pc_boot_set(void *opaque
, const char *boot_device
)
241 Monitor
*mon
= cur_mon
;
242 #define PC_MAX_BOOT_DEVICES 3
243 RTCState
*s
= (RTCState
*)opaque
;
244 int nbds
, bds
[3] = { 0, };
247 nbds
= strlen(boot_device
);
248 if (nbds
> PC_MAX_BOOT_DEVICES
) {
249 monitor_printf(mon
, "Too many boot devices for PC\n");
252 for (i
= 0; i
< nbds
; i
++) {
253 bds
[i
] = boot_device2nibble(boot_device
[i
]);
255 monitor_printf(mon
, "Invalid boot device for PC: '%c'\n",
260 rtc_set_memory(s
, 0x3d, (bds
[1] << 4) | bds
[0]);
261 rtc_set_memory(s
, 0x38, (bds
[2] << 4));
265 /* hd_table must contain 4 block drivers */
266 static void cmos_init(ram_addr_t ram_size
, ram_addr_t above_4g_mem_size
,
267 const char *boot_device
, BlockDriverState
**hd_table
)
269 RTCState
*s
= rtc_state
;
270 int nbds
, bds
[3] = { 0, };
275 /* various important CMOS locations needed by PC/Bochs bios */
278 val
= 640; /* base memory in K */
279 rtc_set_memory(s
, 0x15, val
);
280 rtc_set_memory(s
, 0x16, val
>> 8);
282 val
= (ram_size
/ 1024) - 1024;
285 rtc_set_memory(s
, 0x17, val
);
286 rtc_set_memory(s
, 0x18, val
>> 8);
287 rtc_set_memory(s
, 0x30, val
);
288 rtc_set_memory(s
, 0x31, val
>> 8);
290 if (above_4g_mem_size
) {
291 rtc_set_memory(s
, 0x5b, (unsigned int)above_4g_mem_size
>> 16);
292 rtc_set_memory(s
, 0x5c, (unsigned int)above_4g_mem_size
>> 24);
293 rtc_set_memory(s
, 0x5d, (uint64_t)above_4g_mem_size
>> 32);
296 if (ram_size
> (16 * 1024 * 1024))
297 val
= (ram_size
/ 65536) - ((16 * 1024 * 1024) / 65536);
302 rtc_set_memory(s
, 0x34, val
);
303 rtc_set_memory(s
, 0x35, val
>> 8);
305 /* set the number of CPU */
306 rtc_set_memory(s
, 0x5f, smp_cpus
- 1);
308 /* set boot devices, and disable floppy signature check if requested */
309 #define PC_MAX_BOOT_DEVICES 3
310 nbds
= strlen(boot_device
);
311 if (nbds
> PC_MAX_BOOT_DEVICES
) {
312 fprintf(stderr
, "Too many boot devices for PC\n");
315 for (i
= 0; i
< nbds
; i
++) {
316 bds
[i
] = boot_device2nibble(boot_device
[i
]);
318 fprintf(stderr
, "Invalid boot device for PC: '%c'\n",
323 rtc_set_memory(s
, 0x3d, (bds
[1] << 4) | bds
[0]);
324 rtc_set_memory(s
, 0x38, (bds
[2] << 4) | (fd_bootchk
? 0x0 : 0x1));
328 fd0
= fdctrl_get_drive_type(floppy_controller
, 0);
329 fd1
= fdctrl_get_drive_type(floppy_controller
, 1);
331 val
= (cmos_get_fd_drive_type(fd0
) << 4) | cmos_get_fd_drive_type(fd1
);
332 rtc_set_memory(s
, 0x10, val
);
344 val
|= 0x01; /* 1 drive, ready for boot */
347 val
|= 0x41; /* 2 drives, ready for boot */
350 val
|= 0x02; /* FPU is there */
351 val
|= 0x04; /* PS/2 mouse installed */
352 rtc_set_memory(s
, REG_EQUIPMENT_BYTE
, val
);
356 rtc_set_memory(s
, 0x12, (hd_table
[0] ? 0xf0 : 0) | (hd_table
[1] ? 0x0f : 0));
358 cmos_init_hd(0x19, 0x1b, hd_table
[0]);
360 cmos_init_hd(0x1a, 0x24, hd_table
[1]);
363 for (i
= 0; i
< 4; i
++) {
365 int cylinders
, heads
, sectors
, translation
;
366 /* NOTE: bdrv_get_geometry_hint() returns the physical
367 geometry. It is always such that: 1 <= sects <= 63, 1
368 <= heads <= 16, 1 <= cylinders <= 16383. The BIOS
369 geometry can be different if a translation is done. */
370 translation
= bdrv_get_translation_hint(hd_table
[i
]);
371 if (translation
== BIOS_ATA_TRANSLATION_AUTO
) {
372 bdrv_get_geometry_hint(hd_table
[i
], &cylinders
, &heads
, §ors
);
373 if (cylinders
<= 1024 && heads
<= 16 && sectors
<= 63) {
374 /* No translation. */
377 /* LBA translation. */
383 val
|= translation
<< (i
* 2);
386 rtc_set_memory(s
, 0x39, val
);
389 void ioport_set_a20(int enable
)
391 /* XXX: send to all CPUs ? */
392 cpu_x86_set_a20(first_cpu
, enable
);
395 int ioport_get_a20(void)
397 return ((first_cpu
->a20_mask
>> 20) & 1);
400 static void ioport92_write(void *opaque
, uint32_t addr
, uint32_t val
)
402 ioport_set_a20((val
>> 1) & 1);
403 /* XXX: bit 0 is fast reset */
406 static uint32_t ioport92_read(void *opaque
, uint32_t addr
)
408 return ioport_get_a20() << 1;
411 /***********************************************************/
412 /* Bochs BIOS debug ports */
414 static void bochs_bios_write(void *opaque
, uint32_t addr
, uint32_t val
)
416 static const char shutdown_str
[8] = "Shutdown";
417 static int shutdown_index
= 0;
420 /* Bochs BIOS messages */
423 fprintf(stderr
, "BIOS panic at rombios.c, line %d\n", val
);
428 fprintf(stderr
, "%c", val
);
432 /* same as Bochs power off */
433 if (val
== shutdown_str
[shutdown_index
]) {
435 if (shutdown_index
== 8) {
437 qemu_system_shutdown_request();
444 /* LGPL'ed VGA BIOS messages */
447 fprintf(stderr
, "VGA BIOS panic, line %d\n", val
);
452 fprintf(stderr
, "%c", val
);
458 extern uint64_t node_cpumask
[MAX_NODES
];
460 static void *bochs_bios_init(void)
463 uint8_t *smbios_table
;
465 uint64_t *numa_fw_cfg
;
468 register_ioport_write(0x400, 1, 2, bochs_bios_write
, NULL
);
469 register_ioport_write(0x401, 1, 2, bochs_bios_write
, NULL
);
470 register_ioport_write(0x402, 1, 1, bochs_bios_write
, NULL
);
471 register_ioport_write(0x403, 1, 1, bochs_bios_write
, NULL
);
472 register_ioport_write(0x8900, 1, 1, bochs_bios_write
, NULL
);
474 register_ioport_write(0x501, 1, 2, bochs_bios_write
, NULL
);
475 register_ioport_write(0x502, 1, 2, bochs_bios_write
, NULL
);
476 register_ioport_write(0x500, 1, 1, bochs_bios_write
, NULL
);
477 register_ioport_write(0x503, 1, 1, bochs_bios_write
, NULL
);
479 fw_cfg
= fw_cfg_init(BIOS_CFG_IOPORT
, BIOS_CFG_IOPORT
+ 1, 0, 0);
481 fw_cfg_add_i32(fw_cfg
, FW_CFG_ID
, 1);
482 fw_cfg_add_i64(fw_cfg
, FW_CFG_RAM_SIZE
, (uint64_t)ram_size
);
483 fw_cfg_add_bytes(fw_cfg
, FW_CFG_ACPI_TABLES
, (uint8_t *)acpi_tables
,
485 fw_cfg_add_bytes(fw_cfg
, FW_CFG_IRQ0_OVERRIDE
, &irq0override
, 1);
487 smbios_table
= smbios_get_table(&smbios_len
);
489 fw_cfg_add_bytes(fw_cfg
, FW_CFG_SMBIOS_ENTRIES
,
490 smbios_table
, smbios_len
);
492 /* allocate memory for the NUMA channel: one (64bit) word for the number
493 * of nodes, one word for each VCPU->node and one word for each node to
494 * hold the amount of memory.
496 numa_fw_cfg
= qemu_mallocz((1 + smp_cpus
+ nb_numa_nodes
) * 8);
497 numa_fw_cfg
[0] = cpu_to_le64(nb_numa_nodes
);
498 for (i
= 0; i
< smp_cpus
; i
++) {
499 for (j
= 0; j
< nb_numa_nodes
; j
++) {
500 if (node_cpumask
[j
] & (1 << i
)) {
501 numa_fw_cfg
[i
+ 1] = cpu_to_le64(j
);
506 for (i
= 0; i
< nb_numa_nodes
; i
++) {
507 numa_fw_cfg
[smp_cpus
+ 1 + i
] = cpu_to_le64(node_mem
[i
]);
509 fw_cfg_add_bytes(fw_cfg
, FW_CFG_NUMA
, (uint8_t *)numa_fw_cfg
,
510 (1 + smp_cpus
+ nb_numa_nodes
) * 8);
515 /* Generate an initial boot sector which sets state and jump to
516 a specified vector */
517 static void generate_bootsect(target_phys_addr_t option_rom
,
518 uint32_t gpr
[8], uint16_t segs
[6], uint16_t ip
)
520 uint8_t rom
[512], *p
, *reloc
;
524 memset(rom
, 0, sizeof(rom
));
527 /* Make sure we have an option rom signature */
531 /* ROM size in sectors*/
536 *p
++ = 0x50; /* push ax */
537 *p
++ = 0x1e; /* push ds */
538 *p
++ = 0x31; *p
++ = 0xc0; /* xor ax, ax */
539 *p
++ = 0x8e; *p
++ = 0xd8; /* mov ax, ds */
541 *p
++ = 0xc7; *p
++ = 0x06; /* movvw _start,0x64 */
542 *p
++ = 0x64; *p
++ = 0x00;
544 *p
++ = 0x00; *p
++ = 0x00;
546 *p
++ = 0x8c; *p
++ = 0x0e; /* mov cs,0x66 */
547 *p
++ = 0x66; *p
++ = 0x00;
549 *p
++ = 0x1f; /* pop ds */
550 *p
++ = 0x58; /* pop ax */
551 *p
++ = 0xcb; /* lret */
556 *p
++ = 0xfa; /* CLI */
557 *p
++ = 0xfc; /* CLD */
559 for (i
= 0; i
< 6; i
++) {
560 if (i
== 1) /* Skip CS */
563 *p
++ = 0xb8; /* MOV AX,imm16 */
566 *p
++ = 0x8e; /* MOV <seg>,AX */
567 *p
++ = 0xc0 + (i
<< 3);
570 for (i
= 0; i
< 8; i
++) {
571 *p
++ = 0x66; /* 32-bit operand size */
572 *p
++ = 0xb8 + i
; /* MOV <reg>,imm32 */
579 *p
++ = 0xea; /* JMP FAR */
582 *p
++ = segs
[1]; /* CS */
587 for (i
= 0; i
< (sizeof(rom
) - 1); i
++)
589 rom
[sizeof(rom
) - 1] = -sum
;
591 cpu_physical_memory_write_rom(option_rom
, rom
, sizeof(rom
));
592 option_rom_setup_reset(option_rom
, sizeof (rom
));
595 static long get_file_size(FILE *f
)
599 /* XXX: on Unix systems, using fstat() probably makes more sense */
602 fseek(f
, 0, SEEK_END
);
604 fseek(f
, where
, SEEK_SET
);
609 #define MULTIBOOT_STRUCT_ADDR 0x9000
611 #if MULTIBOOT_STRUCT_ADDR > 0xf0000
612 #error multiboot struct needs to fit in 16 bit real mode
615 static int load_multiboot(void *fw_cfg
,
617 const char *kernel_filename
,
618 const char *initrd_filename
,
619 const char *kernel_cmdline
,
622 int i
, t
, is_multiboot
= 0;
624 uint32_t mh_entry_addr
;
625 uint32_t mh_load_addr
;
626 uint32_t mb_kernel_size
;
627 uint32_t mmap_addr
= MULTIBOOT_STRUCT_ADDR
;
628 uint32_t mb_bootinfo
= MULTIBOOT_STRUCT_ADDR
+ 0x500;
629 uint32_t mb_cmdline
= mb_bootinfo
+ 0x200;
632 /* Ok, let's see if it is a multiboot image.
633 The header is 12x32bit long, so the latest entry may be 8192 - 48. */
634 for (i
= 0; i
< (8192 - 48); i
+= 4) {
635 if (ldl_p(header
+i
) == 0x1BADB002) {
636 uint32_t checksum
= ldl_p(header
+i
+8);
637 flags
= ldl_p(header
+i
+4);
639 checksum
+= (uint32_t)0x1BADB002;
648 return 0; /* no multiboot */
650 #ifdef DEBUG_MULTIBOOT
651 fprintf(stderr
, "qemu: I believe we found a multiboot image!\n");
654 if (flags
& 0x00000004) { /* MULTIBOOT_HEADER_HAS_VBE */
655 fprintf(stderr
, "qemu: multiboot knows VBE. we don't.\n");
657 if (!(flags
& 0x00010000)) { /* MULTIBOOT_HEADER_HAS_ADDR */
661 kernel_size
= load_elf(kernel_filename
, 0, &elf_entry
, NULL
, NULL
);
662 if (kernel_size
< 0) {
663 fprintf(stderr
, "Error while loading elf kernel\n");
666 mh_load_addr
= mh_entry_addr
= elf_entry
;
667 mb_kernel_size
= kernel_size
;
669 #ifdef DEBUG_MULTIBOOT
670 fprintf(stderr
, "qemu: loading multiboot-elf kernel (%#x bytes) with entry %#zx\n",
671 mb_kernel_size
, (size_t)mh_entry_addr
);
674 /* Valid if mh_flags sets MULTIBOOT_HEADER_HAS_ADDR. */
675 uint32_t mh_header_addr
= ldl_p(header
+i
+12);
676 mh_load_addr
= ldl_p(header
+i
+16);
677 #ifdef DEBUG_MULTIBOOT
678 uint32_t mh_load_end_addr
= ldl_p(header
+i
+20);
679 uint32_t mh_bss_end_addr
= ldl_p(header
+i
+24);
681 uint32_t mb_kernel_text_offset
= i
- (mh_header_addr
- mh_load_addr
);
683 mh_entry_addr
= ldl_p(header
+i
+28);
684 mb_kernel_size
= get_file_size(f
) - mb_kernel_text_offset
;
686 /* Valid if mh_flags sets MULTIBOOT_HEADER_HAS_VBE.
687 uint32_t mh_mode_type = ldl_p(header+i+32);
688 uint32_t mh_width = ldl_p(header+i+36);
689 uint32_t mh_height = ldl_p(header+i+40);
690 uint32_t mh_depth = ldl_p(header+i+44); */
692 #ifdef DEBUG_MULTIBOOT
693 fprintf(stderr
, "multiboot: mh_header_addr = %#x\n", mh_header_addr
);
694 fprintf(stderr
, "multiboot: mh_load_addr = %#x\n", mh_load_addr
);
695 fprintf(stderr
, "multiboot: mh_load_end_addr = %#x\n", mh_load_end_addr
);
696 fprintf(stderr
, "multiboot: mh_bss_end_addr = %#x\n", mh_bss_end_addr
);
699 fseek(f
, mb_kernel_text_offset
, SEEK_SET
);
701 #ifdef DEBUG_MULTIBOOT
702 fprintf(stderr
, "qemu: loading multiboot kernel (%#x bytes) at %#x\n",
703 mb_kernel_size
, mh_load_addr
);
706 if (!fread_targphys_ok(mh_load_addr
, mb_kernel_size
, f
)) {
707 fprintf(stderr
, "qemu: read error on multiboot kernel '%s' (%#x)\n",
708 kernel_filename
, mb_kernel_size
);
714 /* blob size is only the kernel for now */
715 mb_mod_end
= mh_load_addr
+ mb_kernel_size
;
718 stl_phys(mb_bootinfo
+ 20, 0x0); /* mods_count */
719 if (initrd_filename
) {
720 uint32_t mb_mod_info
= mb_bootinfo
+ 0x100;
721 uint32_t mb_mod_cmdline
= mb_bootinfo
+ 0x300;
722 uint32_t mb_mod_start
= mh_load_addr
;
723 uint32_t mb_mod_length
= mb_kernel_size
;
726 int mb_mod_count
= 0;
729 next_initrd
= strchr(initrd_filename
, ',');
732 /* if a space comes after the module filename, treat everything
733 after that as parameters */
734 cpu_physical_memory_write(mb_mod_cmdline
, (uint8_t*)initrd_filename
,
735 strlen(initrd_filename
) + 1);
736 stl_phys(mb_mod_info
+ 8, mb_mod_cmdline
); /* string */
737 mb_mod_cmdline
+= strlen(initrd_filename
) + 1;
738 if ((next_space
= strchr(initrd_filename
, ' ')))
740 #ifdef DEBUG_MULTIBOOT
741 printf("multiboot loading module: %s\n", initrd_filename
);
743 f
= fopen(initrd_filename
, "rb");
745 mb_mod_start
= (mb_mod_start
+ mb_mod_length
+ (TARGET_PAGE_SIZE
- 1))
746 & (TARGET_PAGE_MASK
);
747 mb_mod_length
= get_file_size(f
);
748 mb_mod_end
= mb_mod_start
+ mb_mod_length
;
750 if (!fread_targphys_ok(mb_mod_start
, mb_mod_length
, f
)) {
751 fprintf(stderr
, "qemu: read error on multiboot module '%s' (%#x)\n",
752 initrd_filename
, mb_mod_length
);
757 stl_phys(mb_mod_info
+ 0, mb_mod_start
);
758 stl_phys(mb_mod_info
+ 4, mb_mod_start
+ mb_mod_length
);
759 #ifdef DEBUG_MULTIBOOT
760 printf("mod_start: %#x\nmod_end: %#x\n", mb_mod_start
,
761 mb_mod_start
+ mb_mod_length
);
763 stl_phys(mb_mod_info
+ 12, 0x0); /* reserved */
765 initrd_filename
= next_initrd
+1;
767 } while (next_initrd
);
768 stl_phys(mb_bootinfo
+ 20, mb_mod_count
); /* mods_count */
769 stl_phys(mb_bootinfo
+ 24, mb_bootinfo
+ 0x100); /* mods_addr */
772 /* Make sure we're getting kernel + modules back after reset */
773 option_rom_setup_reset(mh_load_addr
, mb_mod_end
- mh_load_addr
);
775 /* Commandline support */
776 stl_phys(mb_bootinfo
+ 16, mb_cmdline
);
777 t
= strlen(kernel_filename
);
778 cpu_physical_memory_write(mb_cmdline
, (uint8_t*)kernel_filename
, t
);
780 stb_phys(mb_cmdline
++, ' ');
781 t
= strlen(kernel_cmdline
) + 1;
782 cpu_physical_memory_write(mb_cmdline
, (uint8_t*)kernel_cmdline
, t
);
784 /* the kernel is where we want it to be now */
786 #define MULTIBOOT_FLAGS_MEMORY (1 << 0)
787 #define MULTIBOOT_FLAGS_BOOT_DEVICE (1 << 1)
788 #define MULTIBOOT_FLAGS_CMDLINE (1 << 2)
789 #define MULTIBOOT_FLAGS_MODULES (1 << 3)
790 #define MULTIBOOT_FLAGS_MMAP (1 << 6)
791 stl_phys(mb_bootinfo
, MULTIBOOT_FLAGS_MEMORY
792 | MULTIBOOT_FLAGS_BOOT_DEVICE
793 | MULTIBOOT_FLAGS_CMDLINE
794 | MULTIBOOT_FLAGS_MODULES
795 | MULTIBOOT_FLAGS_MMAP
);
796 stl_phys(mb_bootinfo
+ 4, 640); /* mem_lower */
797 stl_phys(mb_bootinfo
+ 8, ram_size
/ 1024); /* mem_upper */
798 stl_phys(mb_bootinfo
+ 12, 0x8001ffff); /* XXX: use the -boot switch? */
799 stl_phys(mb_bootinfo
+ 48, mmap_addr
); /* mmap_addr */
801 #ifdef DEBUG_MULTIBOOT
802 fprintf(stderr
, "multiboot: mh_entry_addr = %#x\n", mh_entry_addr
);
805 /* Pass variables to option rom */
806 fw_cfg_add_i32(fw_cfg
, FW_CFG_KERNEL_ADDR
, mh_entry_addr
);
807 fw_cfg_add_i32(fw_cfg
, FW_CFG_INITRD_ADDR
, mb_bootinfo
);
808 fw_cfg_add_i32(fw_cfg
, FW_CFG_INITRD_SIZE
, mmap_addr
);
810 /* Make sure we're getting the config space back after reset */
811 option_rom_setup_reset(mb_bootinfo
, 0x500);
813 option_rom
[nb_option_roms
] = "multiboot.bin";
816 return 1; /* yes, we are multiboot */
819 static void load_linux(void *fw_cfg
,
820 target_phys_addr_t option_rom
,
821 const char *kernel_filename
,
822 const char *initrd_filename
,
823 const char *kernel_cmdline
,
824 target_phys_addr_t max_ram_size
)
830 int setup_size
, kernel_size
, initrd_size
= 0, cmdline_size
;
832 uint8_t header
[8192];
833 target_phys_addr_t real_addr
, prot_addr
, cmdline_addr
, initrd_addr
= 0;
837 /* Align to 16 bytes as a paranoia measure */
838 cmdline_size
= (strlen(kernel_cmdline
)+16) & ~15;
840 /* load the kernel header */
841 f
= fopen(kernel_filename
, "rb");
842 if (!f
|| !(kernel_size
= get_file_size(f
)) ||
843 fread(header
, 1, MIN(ARRAY_SIZE(header
), kernel_size
), f
) !=
844 MIN(ARRAY_SIZE(header
), kernel_size
)) {
845 fprintf(stderr
, "qemu: could not load kernel '%s'\n",
850 /* kernel protocol version */
852 fprintf(stderr
, "header magic: %#x\n", ldl_p(header
+0x202));
854 if (ldl_p(header
+0x202) == 0x53726448)
855 protocol
= lduw_p(header
+0x206);
857 /* This looks like a multiboot kernel. If it is, let's stop
858 treating it like a Linux kernel. */
859 if (load_multiboot(fw_cfg
, f
, kernel_filename
,
860 initrd_filename
, kernel_cmdline
, header
))
865 if (protocol
< 0x200 || !(header
[0x211] & 0x01)) {
868 cmdline_addr
= 0x9a000 - cmdline_size
;
870 } else if (protocol
< 0x202) {
871 /* High but ancient kernel */
873 cmdline_addr
= 0x9a000 - cmdline_size
;
874 prot_addr
= 0x100000;
876 /* High and recent kernel */
878 cmdline_addr
= 0x20000;
879 prot_addr
= 0x100000;
884 "qemu: real_addr = 0x" TARGET_FMT_plx
"\n"
885 "qemu: cmdline_addr = 0x" TARGET_FMT_plx
"\n"
886 "qemu: prot_addr = 0x" TARGET_FMT_plx
"\n",
892 /* highest address for loading the initrd */
893 if (protocol
>= 0x203)
894 initrd_max
= ldl_p(header
+0x22c);
896 initrd_max
= 0x37ffffff;
898 if (initrd_max
>= max_ram_size
-ACPI_DATA_SIZE
)
899 initrd_max
= max_ram_size
-ACPI_DATA_SIZE
-1;
901 /* kernel command line */
902 pstrcpy_targphys(cmdline_addr
, 4096, kernel_cmdline
);
904 if (protocol
>= 0x202) {
905 stl_p(header
+0x228, cmdline_addr
);
907 stw_p(header
+0x20, 0xA33F);
908 stw_p(header
+0x22, cmdline_addr
-real_addr
);
911 /* handle vga= parameter */
912 vmode
= strstr(kernel_cmdline
, "vga=");
914 unsigned int video_mode
;
917 if (!strncmp(vmode
, "normal", 6)) {
919 } else if (!strncmp(vmode
, "ext", 3)) {
921 } else if (!strncmp(vmode
, "ask", 3)) {
924 video_mode
= strtol(vmode
, NULL
, 0);
926 stw_p(header
+0x1fa, video_mode
);
930 /* High nybble = B reserved for Qemu; low nybble is revision number.
931 If this code is substantially changed, you may want to consider
932 incrementing the revision. */
933 if (protocol
>= 0x200)
934 header
[0x210] = 0xB0;
937 if (protocol
>= 0x201) {
938 header
[0x211] |= 0x80; /* CAN_USE_HEAP */
939 stw_p(header
+0x224, cmdline_addr
-real_addr
-0x200);
943 if (initrd_filename
) {
944 if (protocol
< 0x200) {
945 fprintf(stderr
, "qemu: linux kernel too old to load a ram disk\n");
949 fi
= fopen(initrd_filename
, "rb");
951 fprintf(stderr
, "qemu: could not load initial ram disk '%s'\n",
956 initrd_size
= get_file_size(fi
);
957 initrd_addr
= (initrd_max
-initrd_size
) & ~4095;
959 if (!fread_targphys_ok(initrd_addr
, initrd_size
, fi
)) {
960 fprintf(stderr
, "qemu: read error on initial ram disk '%s'\n",
966 stl_p(header
+0x218, initrd_addr
);
967 stl_p(header
+0x21c, initrd_size
);
970 /* store the finalized header and load the rest of the kernel */
971 cpu_physical_memory_write(real_addr
, header
, ARRAY_SIZE(header
));
973 setup_size
= header
[0x1f1];
977 setup_size
= (setup_size
+1)*512;
978 /* Size of protected-mode code */
979 kernel_size
-= (setup_size
> ARRAY_SIZE(header
)) ? setup_size
: ARRAY_SIZE(header
);
981 /* In case we have read too much already, copy that over */
982 if (setup_size
< ARRAY_SIZE(header
)) {
983 cpu_physical_memory_write(prot_addr
, header
+ setup_size
, ARRAY_SIZE(header
) - setup_size
);
984 prot_addr
+= (ARRAY_SIZE(header
) - setup_size
);
985 setup_size
= ARRAY_SIZE(header
);
988 if (!fread_targphys_ok(real_addr
+ ARRAY_SIZE(header
),
989 setup_size
- ARRAY_SIZE(header
), f
) ||
990 !fread_targphys_ok(prot_addr
, kernel_size
, f
)) {
991 fprintf(stderr
, "qemu: read error on kernel '%s'\n",
997 /* generate bootsector to set up the initial register state */
998 real_seg
= real_addr
>> 4;
999 seg
[0] = seg
[2] = seg
[3] = seg
[4] = seg
[4] = real_seg
;
1000 seg
[1] = real_seg
+0x20; /* CS */
1001 memset(gpr
, 0, sizeof gpr
);
1002 gpr
[4] = cmdline_addr
-real_addr
-16; /* SP (-16 is paranoia) */
1004 option_rom_setup_reset(real_addr
, setup_size
);
1005 option_rom_setup_reset(prot_addr
, kernel_size
);
1006 option_rom_setup_reset(cmdline_addr
, cmdline_size
);
1007 if (initrd_filename
)
1008 option_rom_setup_reset(initrd_addr
, initrd_size
);
1010 generate_bootsect(option_rom
, gpr
, seg
, 0);
1013 static const int ide_iobase
[2] = { 0x1f0, 0x170 };
1014 static const int ide_iobase2
[2] = { 0x3f6, 0x376 };
1015 static const int ide_irq
[2] = { 14, 15 };
1017 #define NE2000_NB_MAX 6
1019 static int ne2000_io
[NE2000_NB_MAX
] = { 0x300, 0x320, 0x340, 0x360, 0x280, 0x380 };
1020 static int ne2000_irq
[NE2000_NB_MAX
] = { 9, 10, 11, 3, 4, 5 };
1022 static int serial_io
[MAX_SERIAL_PORTS
] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8 };
1023 static int serial_irq
[MAX_SERIAL_PORTS
] = { 4, 3, 4, 3 };
1025 static int parallel_io
[MAX_PARALLEL_PORTS
] = { 0x378, 0x278, 0x3bc };
1026 static int parallel_irq
[MAX_PARALLEL_PORTS
] = { 7, 7, 7 };
1029 static void audio_init (PCIBus
*pci_bus
, qemu_irq
*pic
)
1033 for (c
= soundhw
; c
->name
; ++c
) {
1036 c
->init
.init_isa(pic
);
1039 c
->init
.init_pci(pci_bus
);
1047 static void pc_init_ne2k_isa(NICInfo
*nd
)
1049 static int nb_ne2k
= 0;
1051 if (nb_ne2k
== NE2000_NB_MAX
)
1053 isa_ne2000_init(ne2000_io
[nb_ne2k
],
1054 isa_reserve_irq(ne2000_irq
[nb_ne2k
]), nd
);
1058 static int load_option_rom(const char *oprom
, target_phys_addr_t start
,
1059 target_phys_addr_t end
)
1064 filename
= qemu_find_file(QEMU_FILE_TYPE_BIOS
, oprom
);
1066 size
= get_image_size(filename
);
1067 if (size
> 0 && start
+ size
> end
) {
1068 fprintf(stderr
, "Not enough space to load option rom '%s'\n",
1072 size
= load_image_targphys(filename
, start
, end
- start
);
1073 qemu_free(filename
);
1078 fprintf(stderr
, "Could not load option rom '%s'\n", oprom
);
1081 /* Round up optiom rom size to the next 2k boundary */
1082 size
= (size
+ 2047) & ~2047;
1083 option_rom_setup_reset(start
, size
);
1087 int cpu_is_bsp(CPUState
*env
)
1089 return env
->cpuid_apic_id
== 0;
1092 static CPUState
*pc_new_cpu(const char *cpu_model
)
1096 env
= cpu_init(cpu_model
);
1098 fprintf(stderr
, "Unable to find x86 CPU definition\n");
1101 if ((env
->cpuid_features
& CPUID_APIC
) || smp_cpus
> 1) {
1102 env
->cpuid_apic_id
= env
->cpu_index
;
1103 /* APIC reset callback resets cpu */
1106 qemu_register_reset((QEMUResetHandler
*)cpu_reset
, env
);
1111 /* PC hardware initialisation */
1112 static void pc_init1(ram_addr_t ram_size
,
1113 const char *boot_device
,
1114 const char *kernel_filename
,
1115 const char *kernel_cmdline
,
1116 const char *initrd_filename
,
1117 const char *cpu_model
,
1121 int ret
, linux_boot
, i
;
1122 ram_addr_t ram_addr
, bios_offset
, option_rom_offset
;
1123 ram_addr_t below_4g_mem_size
, above_4g_mem_size
= 0;
1124 int bios_size
, isa_bios_size
, oprom_area_size
;
1127 int piix3_devfn
= -1;
1132 IsaIrqState
*isa_irq_state
;
1134 BlockDriverState
*hd
[MAX_IDE_BUS
* MAX_IDE_DEVS
];
1135 BlockDriverState
*fd
[MAX_FD
];
1136 int using_vga
= cirrus_vga_enabled
|| std_vga_enabled
|| vmsvga_enabled
;
1139 if (ram_size
>= 0xe0000000 ) {
1140 above_4g_mem_size
= ram_size
- 0xe0000000;
1141 below_4g_mem_size
= 0xe0000000;
1143 below_4g_mem_size
= ram_size
;
1146 linux_boot
= (kernel_filename
!= NULL
);
1149 if (cpu_model
== NULL
) {
1150 #ifdef TARGET_X86_64
1151 cpu_model
= "qemu64";
1153 cpu_model
= "qemu32";
1157 for (i
= 0; i
< smp_cpus
; i
++) {
1158 env
= pc_new_cpu(cpu_model
);
1164 ram_addr
= qemu_ram_alloc(0xa0000);
1165 cpu_register_physical_memory(0, 0xa0000, ram_addr
);
1167 /* Allocate, even though we won't register, so we don't break the
1168 * phys_ram_base + PA assumption. This range includes vga (0xa0000 - 0xc0000),
1169 * and some bios areas, which will be registered later
1171 ram_addr
= qemu_ram_alloc(0x100000 - 0xa0000);
1172 ram_addr
= qemu_ram_alloc(below_4g_mem_size
- 0x100000);
1173 cpu_register_physical_memory(0x100000,
1174 below_4g_mem_size
- 0x100000,
1177 /* above 4giga memory allocation */
1178 if (above_4g_mem_size
> 0) {
1179 #if TARGET_PHYS_ADDR_BITS == 32
1180 hw_error("To much RAM for 32-bit physical address");
1182 ram_addr
= qemu_ram_alloc(above_4g_mem_size
);
1183 cpu_register_physical_memory(0x100000000ULL
,
1191 if (bios_name
== NULL
)
1192 bios_name
= BIOS_FILENAME
;
1193 filename
= qemu_find_file(QEMU_FILE_TYPE_BIOS
, bios_name
);
1195 bios_size
= get_image_size(filename
);
1199 if (bios_size
<= 0 ||
1200 (bios_size
% 65536) != 0) {
1203 bios_offset
= qemu_ram_alloc(bios_size
);
1204 ret
= load_image(filename
, qemu_get_ram_ptr(bios_offset
));
1205 if (ret
!= bios_size
) {
1207 fprintf(stderr
, "qemu: could not load PC BIOS '%s'\n", bios_name
);
1211 qemu_free(filename
);
1213 /* map the last 128KB of the BIOS in ISA space */
1214 isa_bios_size
= bios_size
;
1215 if (isa_bios_size
> (128 * 1024))
1216 isa_bios_size
= 128 * 1024;
1217 cpu_register_physical_memory(0x100000 - isa_bios_size
,
1219 (bios_offset
+ bios_size
- isa_bios_size
) | IO_MEM_ROM
);
1223 option_rom_offset
= qemu_ram_alloc(0x20000);
1224 oprom_area_size
= 0;
1225 cpu_register_physical_memory(0xc0000, 0x20000, option_rom_offset
);
1228 const char *vgabios_filename
;
1230 if (cirrus_vga_enabled
) {
1231 vgabios_filename
= VGABIOS_CIRRUS_FILENAME
;
1233 vgabios_filename
= VGABIOS_FILENAME
;
1235 oprom_area_size
= load_option_rom(vgabios_filename
, 0xc0000, 0xe0000);
1237 /* Although video roms can grow larger than 0x8000, the area between
1238 * 0xc0000 - 0xc8000 is reserved for them. It means we won't be looking
1239 * for any other kind of option rom inside this area */
1240 if (oprom_area_size
< 0x8000)
1241 oprom_area_size
= 0x8000;
1243 /* map all the bios at the top of memory */
1244 cpu_register_physical_memory((uint32_t)(-bios_size
),
1245 bios_size
, bios_offset
| IO_MEM_ROM
);
1247 fw_cfg
= bochs_bios_init();
1250 load_linux(fw_cfg
, 0xc0000 + oprom_area_size
,
1251 kernel_filename
, initrd_filename
, kernel_cmdline
, below_4g_mem_size
);
1252 oprom_area_size
+= 2048;
1255 for (i
= 0; i
< nb_option_roms
; i
++) {
1256 oprom_area_size
+= load_option_rom(option_rom
[i
], 0xc0000 + oprom_area_size
,
1260 for (i
= 0; i
< nb_nics
; i
++) {
1261 char nic_oprom
[1024];
1262 const char *model
= nd_table
[i
].model
;
1264 if (!nd_table
[i
].bootable
)
1269 snprintf(nic_oprom
, sizeof(nic_oprom
), "pxe-%s.bin", model
);
1271 oprom_area_size
+= load_option_rom(nic_oprom
, 0xc0000 + oprom_area_size
,
1275 cpu_irq
= qemu_allocate_irqs(pic_irq_request
, NULL
, 1);
1276 i8259
= i8259_init(cpu_irq
[0]);
1277 isa_irq_state
= qemu_mallocz(sizeof(*isa_irq_state
));
1278 isa_irq_state
->i8259
= i8259
;
1279 isa_irq
= qemu_allocate_irqs(isa_irq_handler
, isa_irq_state
, 24);
1282 pci_bus
= i440fx_init(&i440fx_state
, isa_irq
);
1283 piix3_devfn
= piix3_init(pci_bus
, -1);
1288 isa_bus_irqs(isa_irq
);
1290 ferr_irq
= isa_reserve_irq(13);
1292 /* init basic PC hardware */
1293 register_ioport_write(0x80, 1, 1, ioport80_write
, NULL
);
1295 register_ioport_write(0xf0, 1, 1, ioportF0_write
, NULL
);
1297 if (cirrus_vga_enabled
) {
1299 pci_cirrus_vga_init(pci_bus
);
1301 isa_cirrus_vga_init();
1303 } else if (vmsvga_enabled
) {
1305 pci_vmsvga_init(pci_bus
);
1307 fprintf(stderr
, "%s: vmware_vga: no PCI bus\n", __FUNCTION__
);
1308 } else if (std_vga_enabled
) {
1310 pci_vga_init(pci_bus
, 0, 0);
1316 rtc_state
= rtc_init(0x70, isa_reserve_irq(8), 2000);
1318 qemu_register_boot_set(pc_boot_set
, rtc_state
);
1320 register_ioport_read(0x92, 1, 1, ioport92_read
, NULL
);
1321 register_ioport_write(0x92, 1, 1, ioport92_write
, NULL
);
1324 isa_irq_state
->ioapic
= ioapic_init();
1326 pit
= pit_init(0x40, isa_reserve_irq(0));
1332 for(i
= 0; i
< MAX_SERIAL_PORTS
; i
++) {
1333 if (serial_hds
[i
]) {
1334 serial_init(serial_io
[i
], isa_reserve_irq(serial_irq
[i
]), 115200,
1339 for(i
= 0; i
< MAX_PARALLEL_PORTS
; i
++) {
1340 if (parallel_hds
[i
]) {
1341 parallel_init(parallel_io
[i
], isa_reserve_irq(parallel_irq
[i
]),
1346 for(i
= 0; i
< nb_nics
; i
++) {
1347 NICInfo
*nd
= &nd_table
[i
];
1349 if (!pci_enabled
|| (nd
->model
&& strcmp(nd
->model
, "ne2k_isa") == 0))
1350 pc_init_ne2k_isa(nd
);
1352 pci_nic_init(nd
, "e1000", NULL
);
1355 piix4_acpi_system_hot_add_init();
1357 if (drive_get_max_bus(IF_IDE
) >= MAX_IDE_BUS
) {
1358 fprintf(stderr
, "qemu: too many IDE bus\n");
1362 for(i
= 0; i
< MAX_IDE_BUS
* MAX_IDE_DEVS
; i
++) {
1363 dinfo
= drive_get(IF_IDE
, i
/ MAX_IDE_DEVS
, i
% MAX_IDE_DEVS
);
1364 hd
[i
] = dinfo
? dinfo
->bdrv
: NULL
;
1368 pci_piix3_ide_init(pci_bus
, hd
, piix3_devfn
+ 1, isa_irq
);
1370 for(i
= 0; i
< MAX_IDE_BUS
; i
++) {
1371 isa_ide_init(ide_iobase
[i
], ide_iobase2
[i
],
1372 isa_reserve_irq(ide_irq
[i
]),
1373 hd
[MAX_IDE_DEVS
* i
], hd
[MAX_IDE_DEVS
* i
+ 1]);
1377 isa_dev
= isa_create_simple("i8042", 0x60, 0x64, 1, 12);
1380 audio_init(pci_enabled
? pci_bus
: NULL
, isa_irq
);
1383 for(i
= 0; i
< MAX_FD
; i
++) {
1384 dinfo
= drive_get(IF_FLOPPY
, 0, i
);
1385 fd
[i
] = dinfo
? dinfo
->bdrv
: NULL
;
1387 floppy_controller
= fdctrl_init_isa(6, 2, 0x3f0, fd
);
1389 cmos_init(below_4g_mem_size
, above_4g_mem_size
, boot_device
, hd
);
1391 if (pci_enabled
&& usb_enabled
) {
1392 usb_uhci_piix3_init(pci_bus
, piix3_devfn
+ 2);
1395 if (pci_enabled
&& acpi_enabled
) {
1396 uint8_t *eeprom_buf
= qemu_mallocz(8 * 256); /* XXX: make this persistent */
1399 /* TODO: Populate SPD eeprom data. */
1400 smbus
= piix4_pm_init(pci_bus
, piix3_devfn
+ 3, 0xb100,
1401 isa_reserve_irq(9));
1402 for (i
= 0; i
< 8; i
++) {
1403 DeviceState
*eeprom
;
1404 eeprom
= qdev_create((BusState
*)smbus
, "smbus-eeprom");
1405 qdev_prop_set_uint32(eeprom
, "address", 0x50 + i
);
1406 qdev_prop_set_ptr(eeprom
, "data", eeprom_buf
+ (i
* 256));
1412 i440fx_init_memory_mappings(i440fx_state
);
1419 max_bus
= drive_get_max_bus(IF_SCSI
);
1420 for (bus
= 0; bus
<= max_bus
; bus
++) {
1421 pci_create_simple(pci_bus
, -1, "lsi53c895a");
1425 /* Add virtio console devices */
1427 for(i
= 0; i
< MAX_VIRTIO_CONSOLES
; i
++) {
1428 if (virtcon_hds
[i
]) {
1429 pci_create_simple(pci_bus
, -1, "virtio-console-pci");
1435 static void pc_init_pci(ram_addr_t ram_size
,
1436 const char *boot_device
,
1437 const char *kernel_filename
,
1438 const char *kernel_cmdline
,
1439 const char *initrd_filename
,
1440 const char *cpu_model
)
1442 pc_init1(ram_size
, boot_device
,
1443 kernel_filename
, kernel_cmdline
,
1444 initrd_filename
, cpu_model
, 1);
1447 static void pc_init_isa(ram_addr_t ram_size
,
1448 const char *boot_device
,
1449 const char *kernel_filename
,
1450 const char *kernel_cmdline
,
1451 const char *initrd_filename
,
1452 const char *cpu_model
)
1454 pc_init1(ram_size
, boot_device
,
1455 kernel_filename
, kernel_cmdline
,
1456 initrd_filename
, cpu_model
, 0);
1459 /* set CMOS shutdown status register (index 0xF) as S3_resume(0xFE)
1460 BIOS will read it and start S3 resume at POST Entry */
1461 void cmos_set_s3_resume(void)
1464 rtc_set_memory(rtc_state
, 0xF, 0xFE);
1467 static QEMUMachine pc_machine
= {
1470 .desc
= "Standard PC",
1471 .init
= pc_init_pci
,
1476 static QEMUMachine pc_machine_v0_10
= {
1478 .desc
= "Standard PC, qemu 0.10",
1479 .init
= pc_init_pci
,
1481 .compat_props
= (CompatProperty
[]) {
1483 .driver
= "virtio-blk-pci",
1484 .property
= "class",
1485 .value
= stringify(PCI_CLASS_STORAGE_OTHER
),
1487 .driver
= "virtio-console-pci",
1488 .property
= "class",
1489 .value
= stringify(PCI_CLASS_DISPLAY_OTHER
),
1491 .driver
= "virtio-net-pci",
1492 .property
= "vectors",
1493 .value
= stringify(0),
1495 .driver
= "virtio-blk-pci",
1496 .property
= "vectors",
1497 .value
= stringify(0),
1499 { /* end of list */ }
1503 static QEMUMachine isapc_machine
= {
1505 .desc
= "ISA-only PC",
1506 .init
= pc_init_isa
,
1510 static void pc_machine_init(void)
1512 qemu_register_machine(&pc_machine
);
1513 qemu_register_machine(&pc_machine_v0_10
);
1514 qemu_register_machine(&isapc_machine
);
1517 machine_init(pc_machine_init
);