pci: Trivial device model conversions to realize
[qemu.git] / hw / isa / vt82c686.c
blobb8197b115d1b4d1503e02dd9ab8b28d7d0c73082
1 /*
2 * VT82C686B south bridge support
4 * Copyright (c) 2008 yajin (yajin@vm-kernel.org)
5 * Copyright (c) 2009 chenming (chenming@rdc.faw.com.cn)
6 * Copyright (c) 2010 Huacai Chen (zltjiangshi@gmail.com)
7 * This code is licensed under the GNU GPL v2.
9 * Contributions after 2012-01-13 are licensed under the terms of the
10 * GNU GPL, version 2 or (at your option) any later version.
13 #include "hw/hw.h"
14 #include "hw/i386/pc.h"
15 #include "hw/isa/vt82c686.h"
16 #include "hw/i2c/i2c.h"
17 #include "hw/i2c/smbus.h"
18 #include "hw/pci/pci.h"
19 #include "hw/isa/isa.h"
20 #include "hw/sysbus.h"
21 #include "hw/mips/mips.h"
22 #include "hw/isa/apm.h"
23 #include "hw/acpi/acpi.h"
24 #include "hw/i2c/pm_smbus.h"
25 #include "sysemu/sysemu.h"
26 #include "qemu/timer.h"
27 #include "exec/address-spaces.h"
29 //#define DEBUG_VT82C686B
31 #ifdef DEBUG_VT82C686B
32 #define DPRINTF(fmt, ...) fprintf(stderr, "%s: " fmt, __FUNCTION__, ##__VA_ARGS__)
33 #else
34 #define DPRINTF(fmt, ...)
35 #endif
37 typedef struct SuperIOConfig
39 uint8_t config[0x100];
40 uint8_t index;
41 uint8_t data;
42 } SuperIOConfig;
44 typedef struct VT82C686BState {
45 PCIDevice dev;
46 MemoryRegion superio;
47 SuperIOConfig superio_conf;
48 } VT82C686BState;
50 static void superio_ioport_writeb(void *opaque, hwaddr addr, uint64_t data,
51 unsigned size)
53 SuperIOConfig *superio_conf = opaque;
55 DPRINTF("superio_ioport_writeb address 0x%x val 0x%x\n", addr, data);
56 if (addr == 0x3f0) {
57 superio_conf->index = data & 0xff;
58 } else {
59 bool can_write = true;
60 /* 0x3f1 */
61 switch (superio_conf->index) {
62 case 0x00 ... 0xdf:
63 case 0xe4:
64 case 0xe5:
65 case 0xe9 ... 0xed:
66 case 0xf3:
67 case 0xf5:
68 case 0xf7:
69 case 0xf9 ... 0xfb:
70 case 0xfd ... 0xff:
71 can_write = false;
72 break;
73 case 0xe7:
74 if ((data & 0xff) != 0xfe) {
75 DPRINTF("change uart 1 base. unsupported yet\n");
76 can_write = false;
78 break;
79 case 0xe8:
80 if ((data & 0xff) != 0xbe) {
81 DPRINTF("change uart 2 base. unsupported yet\n");
82 can_write = false;
84 break;
85 default:
86 break;
89 if (can_write) {
90 superio_conf->config[superio_conf->index] = data & 0xff;
95 static uint64_t superio_ioport_readb(void *opaque, hwaddr addr, unsigned size)
97 SuperIOConfig *superio_conf = opaque;
99 DPRINTF("superio_ioport_readb address 0x%x\n", addr);
100 return (superio_conf->config[superio_conf->index]);
103 static const MemoryRegionOps superio_ops = {
104 .read = superio_ioport_readb,
105 .write = superio_ioport_writeb,
106 .endianness = DEVICE_NATIVE_ENDIAN,
107 .impl = {
108 .min_access_size = 1,
109 .max_access_size = 1,
113 static void vt82c686b_reset(void * opaque)
115 PCIDevice *d = opaque;
116 uint8_t *pci_conf = d->config;
117 VT82C686BState *vt82c = DO_UPCAST(VT82C686BState, dev, d);
119 pci_set_long(pci_conf + PCI_CAPABILITY_LIST, 0x000000c0);
120 pci_set_word(pci_conf + PCI_COMMAND, PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
121 PCI_COMMAND_MASTER | PCI_COMMAND_SPECIAL);
122 pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_DEVSEL_MEDIUM);
124 pci_conf[0x48] = 0x01; /* Miscellaneous Control 3 */
125 pci_conf[0x4a] = 0x04; /* IDE interrupt Routing */
126 pci_conf[0x4f] = 0x03; /* DMA/Master Mem Access Control 3 */
127 pci_conf[0x50] = 0x2d; /* PnP DMA Request Control */
128 pci_conf[0x59] = 0x04;
129 pci_conf[0x5a] = 0x04; /* KBC/RTC Control*/
130 pci_conf[0x5f] = 0x04;
131 pci_conf[0x77] = 0x10; /* GPIO Control 1/2/3/4 */
133 vt82c->superio_conf.config[0xe0] = 0x3c;
134 vt82c->superio_conf.config[0xe2] = 0x03;
135 vt82c->superio_conf.config[0xe3] = 0xfc;
136 vt82c->superio_conf.config[0xe6] = 0xde;
137 vt82c->superio_conf.config[0xe7] = 0xfe;
138 vt82c->superio_conf.config[0xe8] = 0xbe;
141 /* write config pci function0 registers. PCI-ISA bridge */
142 static void vt82c686b_write_config(PCIDevice * d, uint32_t address,
143 uint32_t val, int len)
145 VT82C686BState *vt686 = DO_UPCAST(VT82C686BState, dev, d);
147 DPRINTF("vt82c686b_write_config address 0x%x val 0x%x len 0x%x\n",
148 address, val, len);
150 pci_default_write_config(d, address, val, len);
151 if (address == 0x85) { /* enable or disable super IO configure */
152 memory_region_set_enabled(&vt686->superio, val & 0x2);
156 #define ACPI_DBG_IO_ADDR 0xb044
158 typedef struct VT686PMState {
159 PCIDevice dev;
160 MemoryRegion io;
161 ACPIREGS ar;
162 APMState apm;
163 PMSMBus smb;
164 uint32_t smb_io_base;
165 } VT686PMState;
167 typedef struct VT686AC97State {
168 PCIDevice dev;
169 } VT686AC97State;
171 typedef struct VT686MC97State {
172 PCIDevice dev;
173 } VT686MC97State;
175 static void pm_update_sci(VT686PMState *s)
177 int sci_level, pmsts;
179 pmsts = acpi_pm1_evt_get_sts(&s->ar);
180 sci_level = (((pmsts & s->ar.pm1.evt.en) &
181 (ACPI_BITMASK_RT_CLOCK_ENABLE |
182 ACPI_BITMASK_POWER_BUTTON_ENABLE |
183 ACPI_BITMASK_GLOBAL_LOCK_ENABLE |
184 ACPI_BITMASK_TIMER_ENABLE)) != 0);
185 pci_set_irq(&s->dev, sci_level);
186 /* schedule a timer interruption if needed */
187 acpi_pm_tmr_update(&s->ar, (s->ar.pm1.evt.en & ACPI_BITMASK_TIMER_ENABLE) &&
188 !(pmsts & ACPI_BITMASK_TIMER_STATUS));
191 static void pm_tmr_timer(ACPIREGS *ar)
193 VT686PMState *s = container_of(ar, VT686PMState, ar);
194 pm_update_sci(s);
197 static void pm_io_space_update(VT686PMState *s)
199 uint32_t pm_io_base;
201 pm_io_base = pci_get_long(s->dev.config + 0x40);
202 pm_io_base &= 0xffc0;
204 memory_region_transaction_begin();
205 memory_region_set_enabled(&s->io, s->dev.config[0x80] & 1);
206 memory_region_set_address(&s->io, pm_io_base);
207 memory_region_transaction_commit();
210 static void pm_write_config(PCIDevice *d,
211 uint32_t address, uint32_t val, int len)
213 DPRINTF("pm_write_config address 0x%x val 0x%x len 0x%x\n",
214 address, val, len);
215 pci_default_write_config(d, address, val, len);
218 static int vmstate_acpi_post_load(void *opaque, int version_id)
220 VT686PMState *s = opaque;
222 pm_io_space_update(s);
223 return 0;
226 static const VMStateDescription vmstate_acpi = {
227 .name = "vt82c686b_pm",
228 .version_id = 1,
229 .minimum_version_id = 1,
230 .post_load = vmstate_acpi_post_load,
231 .fields = (VMStateField[]) {
232 VMSTATE_PCI_DEVICE(dev, VT686PMState),
233 VMSTATE_UINT16(ar.pm1.evt.sts, VT686PMState),
234 VMSTATE_UINT16(ar.pm1.evt.en, VT686PMState),
235 VMSTATE_UINT16(ar.pm1.cnt.cnt, VT686PMState),
236 VMSTATE_STRUCT(apm, VT686PMState, 0, vmstate_apm, APMState),
237 VMSTATE_TIMER_PTR(ar.tmr.timer, VT686PMState),
238 VMSTATE_INT64(ar.tmr.overflow_time, VT686PMState),
239 VMSTATE_END_OF_LIST()
244 * TODO: vt82c686b_ac97_init() and vt82c686b_mc97_init()
245 * just register a PCI device now, functionalities will be implemented later.
248 static void vt82c686b_ac97_realize(PCIDevice *dev, Error **errp)
250 VT686AC97State *s = DO_UPCAST(VT686AC97State, dev, dev);
251 uint8_t *pci_conf = s->dev.config;
253 pci_set_word(pci_conf + PCI_COMMAND, PCI_COMMAND_INVALIDATE |
254 PCI_COMMAND_PARITY);
255 pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_CAP_LIST |
256 PCI_STATUS_DEVSEL_MEDIUM);
257 pci_set_long(pci_conf + PCI_INTERRUPT_PIN, 0x03);
260 void vt82c686b_ac97_init(PCIBus *bus, int devfn)
262 PCIDevice *dev;
264 dev = pci_create(bus, devfn, "VT82C686B_AC97");
265 qdev_init_nofail(&dev->qdev);
268 static void via_ac97_class_init(ObjectClass *klass, void *data)
270 DeviceClass *dc = DEVICE_CLASS(klass);
271 PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
273 k->realize = vt82c686b_ac97_realize;
274 k->vendor_id = PCI_VENDOR_ID_VIA;
275 k->device_id = PCI_DEVICE_ID_VIA_AC97;
276 k->revision = 0x50;
277 k->class_id = PCI_CLASS_MULTIMEDIA_AUDIO;
278 set_bit(DEVICE_CATEGORY_SOUND, dc->categories);
279 dc->desc = "AC97";
282 static const TypeInfo via_ac97_info = {
283 .name = "VT82C686B_AC97",
284 .parent = TYPE_PCI_DEVICE,
285 .instance_size = sizeof(VT686AC97State),
286 .class_init = via_ac97_class_init,
289 static void vt82c686b_mc97_realize(PCIDevice *dev, Error **errp)
291 VT686MC97State *s = DO_UPCAST(VT686MC97State, dev, dev);
292 uint8_t *pci_conf = s->dev.config;
294 pci_set_word(pci_conf + PCI_COMMAND, PCI_COMMAND_INVALIDATE |
295 PCI_COMMAND_VGA_PALETTE);
296 pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_DEVSEL_MEDIUM);
297 pci_set_long(pci_conf + PCI_INTERRUPT_PIN, 0x03);
300 void vt82c686b_mc97_init(PCIBus *bus, int devfn)
302 PCIDevice *dev;
304 dev = pci_create(bus, devfn, "VT82C686B_MC97");
305 qdev_init_nofail(&dev->qdev);
308 static void via_mc97_class_init(ObjectClass *klass, void *data)
310 DeviceClass *dc = DEVICE_CLASS(klass);
311 PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
313 k->realize = vt82c686b_mc97_realize;
314 k->vendor_id = PCI_VENDOR_ID_VIA;
315 k->device_id = PCI_DEVICE_ID_VIA_MC97;
316 k->class_id = PCI_CLASS_COMMUNICATION_OTHER;
317 k->revision = 0x30;
318 set_bit(DEVICE_CATEGORY_NETWORK, dc->categories);
319 dc->desc = "MC97";
322 static const TypeInfo via_mc97_info = {
323 .name = "VT82C686B_MC97",
324 .parent = TYPE_PCI_DEVICE,
325 .instance_size = sizeof(VT686MC97State),
326 .class_init = via_mc97_class_init,
329 /* vt82c686 pm init */
330 static void vt82c686b_pm_realize(PCIDevice *dev, Error **errp)
332 VT686PMState *s = DO_UPCAST(VT686PMState, dev, dev);
333 uint8_t *pci_conf;
335 pci_conf = s->dev.config;
336 pci_set_word(pci_conf + PCI_COMMAND, 0);
337 pci_set_word(pci_conf + PCI_STATUS, PCI_STATUS_FAST_BACK |
338 PCI_STATUS_DEVSEL_MEDIUM);
340 /* 0x48-0x4B is Power Management I/O Base */
341 pci_set_long(pci_conf + 0x48, 0x00000001);
343 /* SMB ports:0xeee0~0xeeef */
344 s->smb_io_base =((s->smb_io_base & 0xfff0) + 0x0);
345 pci_conf[0x90] = s->smb_io_base | 1;
346 pci_conf[0x91] = s->smb_io_base >> 8;
347 pci_conf[0xd2] = 0x90;
348 pm_smbus_init(&s->dev.qdev, &s->smb);
349 memory_region_add_subregion(get_system_io(), s->smb_io_base, &s->smb.io);
351 apm_init(dev, &s->apm, NULL, s);
353 memory_region_init(&s->io, OBJECT(dev), "vt82c686-pm", 64);
354 memory_region_set_enabled(&s->io, false);
355 memory_region_add_subregion(get_system_io(), 0, &s->io);
357 acpi_pm_tmr_init(&s->ar, pm_tmr_timer, &s->io);
358 acpi_pm1_evt_init(&s->ar, pm_tmr_timer, &s->io);
359 acpi_pm1_cnt_init(&s->ar, &s->io, 2);
362 I2CBus *vt82c686b_pm_init(PCIBus *bus, int devfn, uint32_t smb_io_base,
363 qemu_irq sci_irq)
365 PCIDevice *dev;
366 VT686PMState *s;
368 dev = pci_create(bus, devfn, "VT82C686B_PM");
369 qdev_prop_set_uint32(&dev->qdev, "smb_io_base", smb_io_base);
371 s = DO_UPCAST(VT686PMState, dev, dev);
373 qdev_init_nofail(&dev->qdev);
375 return s->smb.smbus;
378 static Property via_pm_properties[] = {
379 DEFINE_PROP_UINT32("smb_io_base", VT686PMState, smb_io_base, 0),
380 DEFINE_PROP_END_OF_LIST(),
383 static void via_pm_class_init(ObjectClass *klass, void *data)
385 DeviceClass *dc = DEVICE_CLASS(klass);
386 PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
388 k->realize = vt82c686b_pm_realize;
389 k->config_write = pm_write_config;
390 k->vendor_id = PCI_VENDOR_ID_VIA;
391 k->device_id = PCI_DEVICE_ID_VIA_ACPI;
392 k->class_id = PCI_CLASS_BRIDGE_OTHER;
393 k->revision = 0x40;
394 dc->desc = "PM";
395 dc->vmsd = &vmstate_acpi;
396 set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories);
397 dc->props = via_pm_properties;
400 static const TypeInfo via_pm_info = {
401 .name = "VT82C686B_PM",
402 .parent = TYPE_PCI_DEVICE,
403 .instance_size = sizeof(VT686PMState),
404 .class_init = via_pm_class_init,
407 static const VMStateDescription vmstate_via = {
408 .name = "vt82c686b",
409 .version_id = 1,
410 .minimum_version_id = 1,
411 .fields = (VMStateField[]) {
412 VMSTATE_PCI_DEVICE(dev, VT82C686BState),
413 VMSTATE_END_OF_LIST()
417 /* init the PCI-to-ISA bridge */
418 static void vt82c686b_realize(PCIDevice *d, Error **errp)
420 VT82C686BState *vt82c = DO_UPCAST(VT82C686BState, dev, d);
421 uint8_t *pci_conf;
422 ISABus *isa_bus;
423 uint8_t *wmask;
424 int i;
426 isa_bus = isa_bus_new(DEVICE(d), get_system_memory(),
427 pci_address_space_io(d));
429 pci_conf = d->config;
430 pci_config_set_prog_interface(pci_conf, 0x0);
432 wmask = d->wmask;
433 for (i = 0x00; i < 0xff; i++) {
434 if (i<=0x03 || (i>=0x08 && i<=0x3f)) {
435 wmask[i] = 0x00;
439 memory_region_init_io(&vt82c->superio, OBJECT(d), &superio_ops,
440 &vt82c->superio_conf, "superio", 2);
441 memory_region_set_enabled(&vt82c->superio, false);
442 /* The floppy also uses 0x3f0 and 0x3f1.
443 * But we do not emulate a floppy, so just set it here. */
444 memory_region_add_subregion(isa_bus->address_space_io, 0x3f0,
445 &vt82c->superio);
447 qemu_register_reset(vt82c686b_reset, d);
450 ISABus *vt82c686b_init(PCIBus *bus, int devfn)
452 PCIDevice *d;
454 d = pci_create_simple_multifunction(bus, devfn, true, "VT82C686B");
456 return ISA_BUS(qdev_get_child_bus(DEVICE(d), "isa.0"));
459 static void via_class_init(ObjectClass *klass, void *data)
461 DeviceClass *dc = DEVICE_CLASS(klass);
462 PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
464 k->realize = vt82c686b_realize;
465 k->config_write = vt82c686b_write_config;
466 k->vendor_id = PCI_VENDOR_ID_VIA;
467 k->device_id = PCI_DEVICE_ID_VIA_ISA_BRIDGE;
468 k->class_id = PCI_CLASS_BRIDGE_ISA;
469 k->revision = 0x40;
470 dc->desc = "ISA bridge";
471 dc->vmsd = &vmstate_via;
473 * Reason: part of VIA VT82C686 southbridge, needs to be wired up,
474 * e.g. by mips_fulong2e_init()
476 dc->cannot_instantiate_with_device_add_yet = true;
479 static const TypeInfo via_info = {
480 .name = "VT82C686B",
481 .parent = TYPE_PCI_DEVICE,
482 .instance_size = sizeof(VT82C686BState),
483 .class_init = via_class_init,
486 static void vt82c686b_register_types(void)
488 type_register_static(&via_ac97_info);
489 type_register_static(&via_mc97_info);
490 type_register_static(&via_pm_info);
491 type_register_static(&via_info);
494 type_init(vt82c686b_register_types)