3 # qemu configure script (c) 2003 Fabrice Bellard
6 # Unset some variables known to interfere with behavior of common tools,
7 # just as autoconf does.
8 CLICOLOR_FORCE
= GREP_OPTIONS
=
9 unset CLICOLOR_FORCE GREP_OPTIONS
11 # Temporary directory used for files created while
12 # configure runs. Since it is in the build directory
13 # we can safely blow away any previous version of it
14 # (and we need not jump through hoops to try to delete
15 # it when configure exits.)
20 echo "ERROR: failed to create temporary directory"
25 TMPC
="${TMPDIR1}/${TMPB}.c"
26 TMPO
="${TMPDIR1}/${TMPB}.o"
27 TMPCXX
="${TMPDIR1}/${TMPB}.cxx"
28 TMPL
="${TMPDIR1}/${TMPB}.lo"
29 TMPA
="${TMPDIR1}/lib${TMPB}.la"
30 TMPE
="${TMPDIR1}/${TMPB}.exe"
34 # Print a helpful header at the top of config.log
35 echo "# QEMU configure log $(date)" >> config.log
36 printf "# Configured with:" >> config.log
37 printf " '%s'" "$0" "$@" >> config.log
39 echo "#" >> config.log
44 while test -n "$2"; do
53 # Run the compiler, capturing its output to the log. First argument
54 # is compiler binary to execute.
57 echo $compiler "$@" >> config.log
58 $compiler "$@" >> config.log
2>&1 ||
return $?
59 # Test passed. If this is an --enable-werror build, rerun
60 # the test with -Werror and bail out if it fails. This
61 # makes warning-generating-errors in configure test code
62 # obvious to developers.
63 if test "$werror" != "yes"; then
66 # Don't bother rerunning the compile if we were already using -Werror
72 echo $compiler -Werror "$@" >> config.log
73 $compiler -Werror "$@" >> config.log
2>&1 && return $?
74 error_exit
"configure test passed without -Werror but failed with -Werror." \
75 "This is probably a bug in the configure script. The failing command" \
76 "will be at the bottom of config.log." \
77 "You can run configure with --disable-werror to bypass this check."
81 do_compiler
"$cc" "$@"
85 do_compiler
"$cxx" "$@"
89 # Set QEMU_CXXFLAGS from QEMU_CFLAGS by filtering out those
90 # options which some versions of GCC's C++ compiler complain about
91 # because they only make sense for C programs.
93 for arg
in $QEMU_CFLAGS; do
95 -Wstrict-prototypes|
-Wmissing-prototypes|
-Wnested-externs|\
96 -Wold-style-declaration|
-Wold-style-definition|
-Wredundant-decls)
99 QEMU_CXXFLAGS
=${QEMU_CXXFLAGS:+$QEMU_CXXFLAGS }$arg
106 do_cc
$QEMU_CFLAGS -c -o $TMPO $TMPC
112 do_cc
$QEMU_CFLAGS $local_cflags -o $TMPE $TMPC $LDFLAGS $local_ldflags
118 # Run the compiler, capturing its output to the log.
119 echo $libtool $mode --tag=CC
$cc "$@" >> config.log
120 $libtool $mode --tag=CC
$cc "$@" >> config.log
2>&1 ||
return $?
121 # Test passed. If this is an --enable-werror build, rerun
122 # the test with -Werror and bail out if it fails. This
123 # makes warning-generating-errors in configure test code
124 # obvious to developers.
125 if test "$werror" != "yes"; then
128 # Don't bother rerunning the compile if we were already using -Werror
134 echo $libtool $mode --tag=CC
$cc -Werror "$@" >> config.log
135 $libtool $mode --tag=CC
$cc -Werror "$@" >> config.log
2>&1 && return $?
136 error_exit
"configure test passed without -Werror but failed with -Werror." \
137 "This is probably a bug in the configure script. The failing command" \
138 "will be at the bottom of config.log." \
139 "You can run configure with --disable-werror to bypass this check."
143 do_libtool
--mode=compile
$QEMU_CFLAGS -c -fPIE -DPIE -o $TMPO $TMPC ||
return $?
144 do_libtool
--mode=link
$LDFLAGS -o $TMPA $TMPL -rpath /usr
/local
/lib
147 # symbolically link $1 to $2. Portable version of "ln -sf".
150 mkdir
-p "$(dirname "$2")"
154 # check whether a command is available to this shell (may be either an
155 # executable or a builtin)
157 type "$1" >/dev
/null
2>&1
160 # search for an executable in PATH
166 # pathname has a dir component?
167 if [ "${local_command#*/}" != "$local_command" ]; then
168 if [ -x "$local_command" ] && [ ! -d "$local_command" ]; then
169 echo "$local_command"
173 if [ -z "$local_command" ]; then
178 for local_dir
in $PATH; do
179 if [ -x "$local_dir/$local_command" ] && [ ! -d "$local_dir/$local_command" ]; then
180 echo "$local_dir/$local_command"
181 IFS
="${local_ifs:-$(printf ' \t\n')}"
186 IFS
="${local_ifs:-$(printf ' \t\n')}"
191 echo "$trace_backends" |
grep "$1" >/dev
/null
195 source_path
=`dirname "$0"`
198 interp_prefix
="/usr/gnemul/qemu-%M"
202 block_drv_rw_whitelist
=""
203 block_drv_ro_whitelist
=""
209 cc_i386
=i386-pc-linux-gnu-gcc
214 # Don't accept a target_list environment variable.
217 # Default value for a variable defining feature "foo".
218 # * foo="no" feature will only be used if --enable-foo arg is given
219 # * foo="" feature will be searched for, and if found, will be used
220 # unless --disable-foo is given
221 # * foo="yes" this value will only be set by --enable-foo flag.
222 # feature will searched for,
223 # if not found, configure exits with error
225 # Always add --enable-foo and --disable-foo command line args.
226 # Distributions want to ensure that several features are compiled in, and it
227 # is impossible without a --enable-foo that exits if a feature is not found.
251 xen_pci_passthrough
=""
273 LDFLAGS_SHARED
="-shared"
276 mandir
="\${prefix}/share/man"
277 datadir
="\${prefix}/share"
278 qemu_docdir
="\${prefix}/share/doc/qemu"
279 bindir
="\${prefix}/bin"
280 libdir
="\${prefix}/lib"
281 libexecdir
="\${prefix}/libexec"
282 includedir
="\${prefix}/include"
283 sysconfdir
="\${prefix}/etc"
284 local_statedir
="\${prefix}/var"
317 guest_agent_with_vss
="no"
327 glusterfs_discard
="no"
328 glusterfs_zerofill
="no"
329 virtio_blk_data_plane
=""
338 # parse CC options first
340 optarg
=`expr "x$opt" : 'x[^=]*=\(.*\)'`
342 --cross-prefix=*) cross_prefix
="$optarg"
346 --cxx=*) CXX
="$optarg"
348 --source-path=*) source_path
="$optarg"
350 --cpu=*) cpu
="$optarg"
352 --extra-cflags=*) QEMU_CFLAGS
="$optarg $QEMU_CFLAGS"
353 EXTRA_CFLAGS
="$optarg"
355 --extra-ldflags=*) LDFLAGS
="$optarg $LDFLAGS"
356 EXTRA_LDFLAGS
="$optarg"
358 --enable-debug-info) debug_info
="yes"
360 --disable-debug-info) debug_info
="no"
365 # Using uname is really, really broken. Once we have the right set of checks
366 # we can eliminate its usage altogether.
368 # Preferred compiler:
370 # ${cross_prefix}gcc (if cross-prefix specified)
372 if test -z "${CC}${cross_prefix}"; then
375 cc
="${CC-${cross_prefix}gcc}"
378 if test -z "${CXX}${cross_prefix}"; then
381 cxx
="${CXX-${cross_prefix}g++}"
384 ar="${AR-${cross_prefix}ar}"
385 as
="${AS-${cross_prefix}as}"
387 objcopy
="${OBJCOPY-${cross_prefix}objcopy}"
388 ld
="${LD-${cross_prefix}ld}"
389 libtool
="${LIBTOOL-${cross_prefix}libtool}"
390 strip
="${STRIP-${cross_prefix}strip}"
391 windres
="${WINDRES-${cross_prefix}windres}"
392 pkg_config_exe
="${PKG_CONFIG-${cross_prefix}pkg-config}"
394 "${pkg_config_exe}" ${QEMU_PKG_CONFIG_FLAGS} "$@"
396 pkg_config
=query_pkg_config
397 sdl_config
="${SDL_CONFIG-${cross_prefix}sdl-config}"
398 sdl2_config
="${SDL2_CONFIG-${cross_prefix}sdl2-config}"
400 # If the user hasn't specified ARFLAGS, default to 'rv', just as make does.
401 ARFLAGS
="${ARFLAGS-rv}"
403 # default flags for all hosts
404 QEMU_CFLAGS
="-fno-strict-aliasing -fno-common $QEMU_CFLAGS"
405 QEMU_CFLAGS
="-Wall -Wundef -Wwrite-strings -Wmissing-prototypes $QEMU_CFLAGS"
406 QEMU_CFLAGS
="-Wstrict-prototypes -Wredundant-decls $QEMU_CFLAGS"
407 QEMU_CFLAGS
="-D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE $QEMU_CFLAGS"
408 QEMU_INCLUDES
="-I. -I\$(SRC_PATH) -I\$(SRC_PATH)/include"
409 if test "$debug_info" = "yes"; then
411 LDFLAGS
="-g $LDFLAGS"
414 # make source path absolute
415 source_path
=`cd "$source_path"; pwd`
417 # running configure in the source tree?
418 # we know that's the case if configure is there.
419 if test -f "./configure"; then
420 pwd_is_source_path
="y"
422 pwd_is_source_path
="n"
428 #error $1 not defined
430 int main(void) { return 0; }
435 if check_define __linux__
; then
437 elif check_define _WIN32
; then
439 elif check_define __OpenBSD__
; then
441 elif check_define __sun__
; then
443 elif check_define __HAIKU__
; then
449 # Some host OSes need non-standard checks for which CPU to use.
450 # Note that these checks are broken for cross-compilation: if you're
451 # cross-compiling to one of these OSes then you'll need to specify
452 # the correct CPU with the --cpu option.
455 # on Leopard most of the system is 32-bit, so we have to ask the kernel if we can
456 # run 64-bit userspace code.
457 # If the user didn't specify a CPU explicitly and the kernel says this is
458 # 64 bit hw, then assume x86_64. Otherwise fall through to the usual detection code.
459 if test -z "$cpu" && test "$(sysctl -n hw.optional.x86_64)" = "1"; then
464 # `uname -m` returns i86pc even on an x86_64 box, so default based on isainfo
465 if test -z "$cpu" && test "$(isainfo -k)" = "amd64"; then
470 if test ! -z "$cpu" ; then
471 # command line argument
473 elif check_define __i386__
; then
475 elif check_define __x86_64__
; then
476 if check_define __ILP32__
; then
481 elif check_define __sparc__
; then
482 if check_define __arch64__
; then
487 elif check_define _ARCH_PPC
; then
488 if check_define _ARCH_PPC64
; then
493 elif check_define __mips__
; then
495 elif check_define __ia64__
; then
497 elif check_define __s390__
; then
498 if check_define __s390x__
; then
503 elif check_define __arm__
; then
505 elif check_define __aarch64__
; then
507 elif check_define __hppa__
; then
514 # Normalise host CPU name and set ARCH.
515 # Note that this case should only have supported host CPUs, not guests.
517 ia64|ppc|ppc64|s390|s390x|sparc64|x32
)
520 i386|i486|i586|i686|i86pc|BePC
)
539 # This will result in either an error or falling back to TCI later
543 if test -z "$ARCH"; then
552 QEMU_CFLAGS
="-mno-cygwin $QEMU_CFLAGS"
553 audio_possible_drivers
="winwave sdl"
554 audio_drv_list
="winwave"
558 audio_possible_drivers
="winwave dsound sdl fmod"
559 audio_drv_list
="winwave"
564 audio_possible_drivers
="oss sdl esd pa"
570 audio_possible_drivers
="oss sdl esd pa"
571 # needed for kinfo_getvmmap(3) in libutil.h
573 netmap
="" # enable netmap autodetect
579 audio_possible_drivers
="oss sdl esd pa"
585 audio_possible_drivers
="oss sdl esd"
592 audio_possible_drivers
="sdl esd"
597 LDFLAGS_SHARED
="-bundle -undefined dynamic_lookup"
598 if [ "$cpu" = "x86_64" ] ; then
599 QEMU_CFLAGS
="-arch x86_64 $QEMU_CFLAGS"
600 LDFLAGS
="-arch x86_64 $LDFLAGS"
603 audio_drv_list
="coreaudio"
604 audio_possible_drivers
="coreaudio sdl fmod"
605 LDFLAGS
="-framework CoreFoundation -framework IOKit $LDFLAGS"
606 libs_softmmu
="-F/System/Library/Frameworks -framework Cocoa -framework IOKit $libs_softmmu"
607 # Disable attempts to use ObjectiveC features in os/object.h since they
608 # won't work when we're compiling with gcc as a C compiler.
609 QEMU_CFLAGS
="-DOS_OBJECT_USE_OBJC=0 $QEMU_CFLAGS"
614 install="${INSTALL-ginstall}"
616 smbd
="${SMBD-/usr/sfw/sbin/smbd}"
617 needs_libsunmath
="no"
618 solarisrev
=`uname -r | cut -f2 -d.`
619 if [ "$cpu" = "i386" -o "$cpu" = "x86_64" ] ; then
620 if test "$solarisrev" -le 9 ; then
621 if test -f /opt
/SUNWspro
/prod
/lib
/libsunmath.so
.1; then
622 needs_libsunmath
="yes"
623 QEMU_CFLAGS
="-I/opt/SUNWspro/prod/include/cc $QEMU_CFLAGS"
624 LDFLAGS
="-L/opt/SUNWspro/prod/lib -R/opt/SUNWspro/prod/lib $LDFLAGS"
625 LIBS
="-lsunmath $LIBS"
627 error_exit
"QEMU will not link correctly on Solaris 8/X86 or 9/x86 without" \
628 "libsunmath from the Sun Studio compilers tools, due to a lack of" \
629 "C99 math features in libm.so in Solaris 8/x86 and Solaris 9/x86" \
630 "Studio 11 can be downloaded from www.sun.com."
634 if test -f /usr
/include
/sys
/soundcard.h
; then
637 audio_possible_drivers
="oss sdl"
638 # needed for CMSG_ macros in sys/socket.h
639 QEMU_CFLAGS
="-D_XOPEN_SOURCE=600 $QEMU_CFLAGS"
640 # needed for TIOCWIN* defines in termios.h
641 QEMU_CFLAGS
="-D__EXTENSIONS__ $QEMU_CFLAGS"
642 QEMU_CFLAGS
="-std=gnu99 $QEMU_CFLAGS"
643 solarisnetlibs
="-lsocket -lnsl -lresolv"
644 LIBS
="$solarisnetlibs $LIBS"
645 libs_qga
="$solarisnetlibs $libs_qga"
653 QEMU_CFLAGS
="-DB_USE_POSITIVE_POSIX_ERRORS $QEMU_CFLAGS"
654 LIBS
="-lposix_error_mapper -lnetwork $LIBS"
658 audio_possible_drivers
="oss alsa sdl esd pa"
664 if [ "$cpu" = "i386" -o "$cpu" = "x86_64" -o "$cpu" = "x32" ] ; then
665 audio_possible_drivers
="$audio_possible_drivers fmod"
667 QEMU_INCLUDES
="-I\$(SRC_PATH)/linux-headers -I$(pwd)/linux-headers $QEMU_INCLUDES"
671 if [ "$bsd" = "yes" ] ; then
672 if [ "$darwin" != "yes" ] ; then
677 : ${make=${MAKE-make}}
678 : ${install=${INSTALL-install}}
679 : ${python=${PYTHON-python}}
680 : ${smbd=${SMBD-/usr/sbin/smbd}}
682 # Default objcc to clang if available, otherwise use CC
689 if test "$mingw32" = "yes" ; then
692 QEMU_CFLAGS
="-DWIN32_LEAN_AND_MEAN -DWINVER=0x501 $QEMU_CFLAGS"
693 # enable C99/POSIX format strings (needs mingw32-runtime 3.15 or later)
694 QEMU_CFLAGS
="-D__USE_MINGW_ANSI_STDIO=1 $QEMU_CFLAGS"
695 LIBS
="-lwinmm -lws2_32 -liphlpapi $LIBS"
697 int main(void) { return 0; }
699 if compile_prog
"" "-liberty" ; then
700 LIBS
="-liberty $LIBS"
702 prefix
="c:/Program Files/QEMU"
705 qemu_docdir
="\${prefix}"
707 sysconfdir
="\${prefix}"
710 libs_qga
="-lws2_32 -lwinmm -lpowrprof $libs_qga"
716 optarg
=`expr "x$opt" : 'x[^=]*=\(.*\)'`
718 --help|
-h) show_help
=yes
720 --version|
-V) exec cat $source_path/VERSION
722 --prefix=*) prefix
="$optarg"
724 --interp-prefix=*) interp_prefix
="$optarg"
732 --host-cc=*) host_cc
="$optarg"
736 --iasl=*) iasl
="$optarg"
738 --objcc=*) objcc
="$optarg"
740 --make=*) make="$optarg"
742 --install=*) install="$optarg"
744 --python=*) python
="$optarg"
746 --gcov=*) gcov_tool
="$optarg"
748 --smbd=*) smbd
="$optarg"
756 --disable-debug-info)
763 --target-list=*) target_list
="$optarg"
765 --enable-trace-backends=*) trace_backends
="$optarg"
767 # XXX: backwards compatibility
768 --enable-trace-backend=*) trace_backends
="$optarg"
770 --with-trace-file=*) trace_file
="$optarg"
772 --enable-gprof) gprof
="yes"
774 --enable-gcov) gcov
="yes"
778 LDFLAGS
="-static $LDFLAGS"
779 QEMU_PKG_CONFIG_FLAGS
="--static $QEMU_PKG_CONFIG_FLAGS"
781 --mandir=*) mandir
="$optarg"
783 --bindir=*) bindir
="$optarg"
785 --libdir=*) libdir
="$optarg"
787 --libexecdir=*) libexecdir
="$optarg"
789 --includedir=*) includedir
="$optarg"
791 --datadir=*) datadir
="$optarg"
793 --with-confsuffix=*) confsuffix
="$optarg"
795 --docdir=*) qemu_docdir
="$optarg"
797 --sysconfdir=*) sysconfdir
="$optarg"
799 --localstatedir=*) local_statedir
="$optarg"
801 --sbindir=*|
--sharedstatedir=*|\
802 --oldincludedir=*|
--datarootdir=*|
--infodir=*|
--localedir=*|\
803 --htmldir=*|
--dvidir=*|
--pdfdir=*|
--psdir=*)
804 # These switches are silently ignored, for compatibility with
805 # autoconf-generated configure scripts. This allows QEMU's
806 # configure to be used by RPM and similar macros that set
807 # lots of directory switches by default.
809 --with-system-pixman) pixman
="system"
811 --without-system-pixman) pixman
="internal"
813 --without-pixman) pixman
="none"
815 --disable-sdl) sdl
="no"
817 --enable-sdl) sdl
="yes"
819 --with-sdlabi=*) sdlabi
="$optarg"
821 --disable-qom-cast-debug) qom_cast_debug
="no"
823 --enable-qom-cast-debug) qom_cast_debug
="yes"
825 --disable-virtfs) virtfs
="no"
827 --enable-virtfs) virtfs
="yes"
829 --disable-vnc) vnc
="no"
831 --enable-vnc) vnc
="yes"
833 --fmod-lib=*) fmod_lib
="$optarg"
835 --fmod-inc=*) fmod_inc
="$optarg"
837 --oss-lib=*) oss_lib
="$optarg"
839 --audio-drv-list=*) audio_drv_list
="$optarg"
841 --block-drv-rw-whitelist=*|
--block-drv-whitelist=*) block_drv_rw_whitelist
=`echo "$optarg" | sed -e 's/,/ /g'`
843 --block-drv-ro-whitelist=*) block_drv_ro_whitelist
=`echo "$optarg" | sed -e 's/,/ /g'`
845 --enable-debug-tcg) debug_tcg
="yes"
847 --disable-debug-tcg) debug_tcg
="no"
850 # Enable debugging options that aren't excessively noisy
855 --enable-sparse) sparse
="yes"
857 --disable-sparse) sparse
="no"
859 --disable-strip) strip_opt
="no"
861 --disable-vnc-tls) vnc_tls
="no"
863 --enable-vnc-tls) vnc_tls
="yes"
865 --disable-vnc-sasl) vnc_sasl
="no"
867 --enable-vnc-sasl) vnc_sasl
="yes"
869 --disable-vnc-jpeg) vnc_jpeg
="no"
871 --enable-vnc-jpeg) vnc_jpeg
="yes"
873 --disable-vnc-png) vnc_png
="no"
875 --enable-vnc-png) vnc_png
="yes"
877 --disable-vnc-ws) vnc_ws
="no"
879 --enable-vnc-ws) vnc_ws
="yes"
881 --disable-slirp) slirp
="no"
883 --disable-uuid) uuid
="no"
885 --enable-uuid) uuid
="yes"
887 --disable-vde) vde
="no"
889 --enable-vde) vde
="yes"
891 --disable-netmap) netmap
="no"
893 --enable-netmap) netmap
="yes"
895 --disable-xen) xen
="no"
897 --enable-xen) xen
="yes"
899 --disable-xen-pci-passthrough) xen_pci_passthrough
="no"
901 --enable-xen-pci-passthrough) xen_pci_passthrough
="yes"
903 --disable-brlapi) brlapi
="no"
905 --enable-brlapi) brlapi
="yes"
907 --disable-bluez) bluez
="no"
909 --enable-bluez) bluez
="yes"
911 --disable-kvm) kvm
="no"
913 --enable-kvm) kvm
="yes"
915 --disable-tcg-interpreter) tcg_interpreter
="no"
917 --enable-tcg-interpreter) tcg_interpreter
="yes"
919 --disable-cap-ng) cap_ng
="no"
921 --enable-cap-ng) cap_ng
="yes"
923 --disable-spice) spice
="no"
925 --enable-spice) spice
="yes"
927 --disable-libiscsi) libiscsi
="no"
929 --enable-libiscsi) libiscsi
="yes"
931 --disable-libnfs) libnfs
="no"
933 --enable-libnfs) libnfs
="yes"
935 --enable-profiler) profiler
="yes"
937 --disable-cocoa) cocoa
="no"
942 audio_drv_list
="coreaudio `echo $audio_drv_list | sed s,coreaudio,,g`"
944 --disable-system) softmmu
="no"
946 --enable-system) softmmu
="yes"
953 --disable-linux-user) linux_user
="no"
955 --enable-linux-user) linux_user
="yes"
957 --disable-bsd-user) bsd_user
="no"
959 --enable-bsd-user) bsd_user
="yes"
961 --enable-guest-base) guest_base
="yes"
963 --disable-guest-base) guest_base
="no"
965 --enable-pie) pie
="yes"
967 --disable-pie) pie
="no"
969 --enable-werror) werror
="yes"
971 --disable-werror) werror
="no"
973 --enable-stack-protector) stack_protector
="yes"
975 --disable-stack-protector) stack_protector
="no"
977 --disable-curses) curses
="no"
979 --enable-curses) curses
="yes"
981 --disable-curl) curl
="no"
983 --enable-curl) curl
="yes"
985 --disable-fdt) fdt
="no"
987 --enable-fdt) fdt
="yes"
989 --disable-linux-aio) linux_aio
="no"
991 --enable-linux-aio) linux_aio
="yes"
993 --disable-attr) attr
="no"
995 --enable-attr) attr
="yes"
997 --disable-blobs) blobs
="no"
999 --with-pkgversion=*) pkgversion
=" ($optarg)"
1001 --with-coroutine=*) coroutine
="$optarg"
1003 --disable-coroutine-pool) coroutine_pool
="no"
1005 --enable-coroutine-pool) coroutine_pool
="yes"
1007 --disable-docs) docs
="no"
1009 --enable-docs) docs
="yes"
1011 --disable-vhost-net) vhost_net
="no"
1013 --enable-vhost-net) vhost_net
="yes"
1015 --disable-vhost-scsi) vhost_scsi
="no"
1017 --enable-vhost-scsi) vhost_scsi
="yes"
1019 --disable-glx) glx
="no"
1021 --enable-glx) glx
="yes"
1023 --disable-rbd) rbd
="no"
1025 --enable-rbd) rbd
="yes"
1027 --disable-xfsctl) xfs
="no"
1029 --enable-xfsctl) xfs
="yes"
1031 --disable-smartcard-nss) smartcard_nss
="no"
1033 --enable-smartcard-nss) smartcard_nss
="yes"
1035 --disable-libusb) libusb
="no"
1037 --enable-libusb) libusb
="yes"
1039 --disable-usb-redir) usb_redir
="no"
1041 --enable-usb-redir) usb_redir
="yes"
1043 --disable-zlib-test) zlib
="no"
1045 --enable-lzo) lzo
="yes"
1047 --enable-snappy) snappy
="yes"
1049 --enable-guest-agent) guest_agent
="yes"
1051 --disable-guest-agent) guest_agent
="no"
1053 --with-vss-sdk) vss_win32_sdk
=""
1055 --with-vss-sdk=*) vss_win32_sdk
="$optarg"
1057 --without-vss-sdk) vss_win32_sdk
="no"
1059 --with-win-sdk) win_sdk
=""
1061 --with-win-sdk=*) win_sdk
="$optarg"
1063 --without-win-sdk) win_sdk
="no"
1065 --enable-tools) want_tools
="yes"
1067 --disable-tools) want_tools
="no"
1069 --enable-seccomp) seccomp
="yes"
1071 --disable-seccomp) seccomp
="no"
1073 --disable-glusterfs) glusterfs
="no"
1075 --enable-glusterfs) glusterfs
="yes"
1077 --disable-virtio-blk-data-plane) virtio_blk_data_plane
="no"
1079 --enable-virtio-blk-data-plane) virtio_blk_data_plane
="yes"
1081 --disable-gtk) gtk
="no"
1083 --enable-gtk) gtk
="yes"
1085 --enable-rdma) rdma
="yes"
1087 --disable-rdma) rdma
="no"
1089 --with-gtkabi=*) gtkabi
="$optarg"
1091 --disable-vte) vte
="no"
1093 --enable-vte) vte
="yes"
1095 --enable-tpm) tpm
="yes"
1097 --disable-libssh2) libssh2
="no"
1099 --enable-libssh2) libssh2
="yes"
1101 --enable-vhdx) vhdx
="yes"
1103 --disable-vhdx) vhdx
="no"
1105 --disable-quorum) quorum
="no"
1107 --enable-quorum) quorum
="yes"
1110 echo "ERROR: unknown option $opt"
1111 echo "Try '$0 --help' for more information"
1117 if ! has
$python; then
1118 error_exit
"Python not found. Use --python=/path/to/python"
1121 # Note that if the Python conditional here evaluates True we will exit
1122 # with status 1 which is a shell 'false' value.
1123 if ! $python -c 'import sys; sys.exit(sys.version_info < (2,4) or sys.version_info >= (3,))'; then
1124 error_exit
"Cannot use '$python', Python 2.4 or later is required." \
1125 "Note that Python 3 or later is not yet supported." \
1126 "Use --python=/path/to/python to specify a supported Python."
1129 # The -B switch was added in Python 2.6.
1130 # If it is supplied, compiled files are not written.
1131 # Use it for Python versions which support it.
1132 if $python -B -c 'import sys; sys.exit(0)' 2>/dev
/null
; then
1139 LDFLAGS
="-m32 $LDFLAGS"
1143 LDFLAGS
="-m64 $LDFLAGS"
1146 LDFLAGS
="-m32 $LDFLAGS"
1147 CPU_CFLAGS
="-m32 -mcpu=ultrasparc"
1150 LDFLAGS
="-m64 $LDFLAGS"
1151 CPU_CFLAGS
="-m64 -mcpu=ultrasparc"
1155 LDFLAGS
="-m31 $LDFLAGS"
1159 LDFLAGS
="-m64 $LDFLAGS"
1163 LDFLAGS
="-m32 $LDFLAGS"
1164 cc_i386
='$(CC) -m32'
1168 LDFLAGS
="-m64 $LDFLAGS"
1169 cc_i386
='$(CC) -m32'
1173 LDFLAGS
="-mx32 $LDFLAGS"
1174 cc_i386
='$(CC) -m32'
1176 # No special flags required for other host CPUs
1179 QEMU_CFLAGS
="$CPU_CFLAGS $QEMU_CFLAGS"
1180 EXTRA_CFLAGS
="$CPU_CFLAGS $EXTRA_CFLAGS"
1182 default_target_list
=""
1186 if [ "$softmmu" = "yes" ]; then
1187 mak_wilds
="${mak_wilds} $source_path/default-configs/*-softmmu.mak"
1189 if [ "$linux_user" = "yes" ]; then
1190 mak_wilds
="${mak_wilds} $source_path/default-configs/*-linux-user.mak"
1192 if [ "$bsd_user" = "yes" ]; then
1193 mak_wilds
="${mak_wilds} $source_path/default-configs/*-bsd-user.mak"
1196 for config
in $mak_wilds; do
1197 default_target_list
="${default_target_list} $(basename "$config" .mak)"
1200 if test x
"$show_help" = x
"yes" ; then
1203 Usage: configure [options]
1204 Options: [defaults in brackets after descriptions]
1207 --help print this message
1208 --prefix=PREFIX install in PREFIX [$prefix]
1209 --interp-prefix=PREFIX where to find shared libraries, etc.
1210 use %M for cpu name [$interp_prefix]
1211 --target-list=LIST set target list (default: build everything)
1212 $(echo Available targets: $default_target_list | \
1213 fold -s -w 53 | sed -e 's/^/ /')
1215 Advanced options (experts only):
1216 --source-path=PATH path of source code [$source_path]
1217 --cross-prefix=PREFIX use PREFIX for compile tools [$cross_prefix]
1218 --cc=CC use C compiler CC [$cc]
1219 --iasl=IASL use ACPI compiler IASL [$iasl]
1220 --host-cc=CC use C compiler CC [$host_cc] for code run at
1222 --cxx=CXX use C++ compiler CXX [$cxx]
1223 --objcc=OBJCC use Objective-C compiler OBJCC [$objcc]
1224 --extra-cflags=CFLAGS append extra C compiler flags QEMU_CFLAGS
1225 --extra-ldflags=LDFLAGS append extra linker flags LDFLAGS
1226 --make=MAKE use specified make [$make]
1227 --install=INSTALL use specified install [$install]
1228 --python=PYTHON use specified python [$python]
1229 --smbd=SMBD use specified smbd [$smbd]
1230 --static enable static build [$static]
1231 --mandir=PATH install man pages in PATH
1232 --datadir=PATH install firmware in PATH$confsuffix
1233 --docdir=PATH install documentation in PATH$confsuffix
1234 --bindir=PATH install binaries in PATH
1235 --libdir=PATH install libraries in PATH
1236 --sysconfdir=PATH install config in PATH$confsuffix
1237 --localstatedir=PATH install local state in PATH (set at runtime on win32)
1238 --with-confsuffix=SUFFIX suffix for QEMU data inside datadir/libdir/sysconfdir [$confsuffix]
1239 --enable-modules enable modules support
1240 --enable-debug-tcg enable TCG debugging
1241 --disable-debug-tcg disable TCG debugging (default)
1242 --enable-debug-info enable debugging information (default)
1243 --disable-debug-info disable debugging information
1244 --enable-debug enable common debug build options
1245 --enable-sparse enable sparse checker
1246 --disable-sparse disable sparse checker (default)
1247 --disable-strip disable stripping binaries
1248 --disable-werror disable compilation abort on warning
1249 --disable-stack-protector disable compiler-provided stack protection
1250 --disable-sdl disable SDL
1251 --enable-sdl enable SDL
1252 --with-sdlabi select preferred SDL ABI 1.2 or 2.0
1253 --disable-gtk disable gtk UI
1254 --enable-gtk enable gtk UI
1255 --with-gtkabi select preferred GTK ABI 2.0 or 3.0
1256 --disable-virtfs disable VirtFS
1257 --enable-virtfs enable VirtFS
1258 --disable-vnc disable VNC
1259 --enable-vnc enable VNC
1260 --disable-cocoa disable Cocoa (Mac OS X only)
1261 --enable-cocoa enable Cocoa (default on Mac OS X)
1262 --audio-drv-list=LIST set audio drivers list:
1263 Available drivers: $audio_possible_drivers
1264 --block-drv-whitelist=L Same as --block-drv-rw-whitelist=L
1265 --block-drv-rw-whitelist=L
1266 set block driver read-write whitelist
1267 (affects only QEMU, not qemu-img)
1268 --block-drv-ro-whitelist=L
1269 set block driver read-only whitelist
1270 (affects only QEMU, not qemu-img)
1271 --disable-xen disable xen backend driver support
1272 --enable-xen enable xen backend driver support
1273 --disable-xen-pci-passthrough
1274 --enable-xen-pci-passthrough
1275 --disable-brlapi disable BrlAPI
1276 --enable-brlapi enable BrlAPI
1277 --disable-vnc-tls disable TLS encryption for VNC server
1278 --enable-vnc-tls enable TLS encryption for VNC server
1279 --disable-vnc-sasl disable SASL encryption for VNC server
1280 --enable-vnc-sasl enable SASL encryption for VNC server
1281 --disable-vnc-jpeg disable JPEG lossy compression for VNC server
1282 --enable-vnc-jpeg enable JPEG lossy compression for VNC server
1283 --disable-vnc-png disable PNG compression for VNC server (default)
1284 --enable-vnc-png enable PNG compression for VNC server
1285 --disable-vnc-ws disable Websockets support for VNC server
1286 --enable-vnc-ws enable Websockets support for VNC server
1287 --disable-curses disable curses output
1288 --enable-curses enable curses output
1289 --disable-curl disable curl connectivity
1290 --enable-curl enable curl connectivity
1291 --disable-fdt disable fdt device tree
1292 --enable-fdt enable fdt device tree
1293 --disable-bluez disable bluez stack connectivity
1294 --enable-bluez enable bluez stack connectivity
1295 --disable-slirp disable SLIRP userspace network connectivity
1296 --disable-kvm disable KVM acceleration support
1297 --enable-kvm enable KVM acceleration support
1298 --disable-rdma disable RDMA-based migration support
1299 --enable-rdma enable RDMA-based migration support
1300 --enable-tcg-interpreter enable TCG with bytecode interpreter (TCI)
1301 --enable-system enable all system emulation targets
1302 --disable-system disable all system emulation targets
1303 --enable-user enable supported user emulation targets
1304 --disable-user disable all user emulation targets
1305 --enable-linux-user enable all linux usermode emulation targets
1306 --disable-linux-user disable all linux usermode emulation targets
1307 --enable-bsd-user enable all BSD usermode emulation targets
1308 --disable-bsd-user disable all BSD usermode emulation targets
1309 --enable-guest-base enable GUEST_BASE support for usermode
1311 --disable-guest-base disable GUEST_BASE support
1312 --enable-pie build Position Independent Executables
1313 --disable-pie do not build Position Independent Executables
1314 --fmod-lib path to FMOD library
1315 --fmod-inc path to FMOD includes
1316 --oss-lib path to OSS library
1317 --cpu=CPU Build for host CPU [$cpu]
1318 --disable-uuid disable uuid support
1319 --enable-uuid enable uuid support
1320 --disable-vde disable support for vde network
1321 --enable-vde enable support for vde network
1322 --disable-netmap disable support for netmap network
1323 --enable-netmap enable support for netmap network
1324 --disable-linux-aio disable Linux AIO support
1325 --enable-linux-aio enable Linux AIO support
1326 --disable-cap-ng disable libcap-ng support
1327 --enable-cap-ng enable libcap-ng support
1328 --disable-attr disables attr and xattr support
1329 --enable-attr enable attr and xattr support
1330 --disable-blobs disable installing provided firmware blobs
1331 --enable-docs enable documentation build
1332 --disable-docs disable documentation build
1333 --disable-vhost-net disable vhost-net acceleration support
1334 --enable-vhost-net enable vhost-net acceleration support
1335 --enable-trace-backends=B Set trace backend
1336 Available backends: $($python $source_path/scripts/tracetool.py --list-backends)
1337 --with-trace-file=NAME Full PATH,NAME of file to store traces
1339 --disable-spice disable spice
1340 --enable-spice enable spice
1341 --enable-rbd enable building the rados block device (rbd)
1342 --disable-libiscsi disable iscsi support
1343 --enable-libiscsi enable iscsi support
1344 --disable-libnfs disable nfs support
1345 --enable-libnfs enable nfs support
1346 --disable-smartcard-nss disable smartcard nss support
1347 --enable-smartcard-nss enable smartcard nss support
1348 --disable-libusb disable libusb (for usb passthrough)
1349 --enable-libusb enable libusb (for usb passthrough)
1350 --disable-usb-redir disable usb network redirection support
1351 --enable-usb-redir enable usb network redirection support
1352 --enable-lzo enable the support of lzo compression library
1353 --enable-snappy enable the support of snappy compression library
1354 --disable-guest-agent disable building of the QEMU Guest Agent
1355 --enable-guest-agent enable building of the QEMU Guest Agent
1356 --with-vss-sdk=SDK-path enable Windows VSS support in QEMU Guest Agent
1357 --with-win-sdk=SDK-path path to Windows Platform SDK (to build VSS .tlb)
1358 --disable-seccomp disable seccomp support
1359 --enable-seccomp enables seccomp support
1360 --with-coroutine=BACKEND coroutine backend. Supported options:
1361 gthread, ucontext, sigaltstack, windows
1362 --disable-coroutine-pool disable coroutine freelist (worse performance)
1363 --enable-coroutine-pool enable coroutine freelist (better performance)
1364 --enable-glusterfs enable GlusterFS backend
1365 --disable-glusterfs disable GlusterFS backend
1366 --enable-gcov enable test coverage analysis with gcov
1367 --gcov=GCOV use specified gcov [$gcov_tool]
1368 --enable-tpm enable TPM support
1369 --disable-libssh2 disable ssh block device support
1370 --enable-libssh2 enable ssh block device support
1371 --disable-vhdx disables support for the Microsoft VHDX image format
1372 --enable-vhdx enable support for the Microsoft VHDX image format
1373 --disable-quorum disable quorum block filter support
1374 --enable-quorum enable quorum block filter support
1376 NOTE: The object files are built at the place where configure is launched
1381 # Now we have handled --enable-tcg-interpreter and know we're not just
1382 # printing the help message, bail out if the host CPU isn't supported.
1383 if test "$ARCH" = "unknown"; then
1384 if test "$tcg_interpreter" = "yes" ; then
1385 echo "Unsupported CPU = $cpu, will use TCG with TCI (experimental)"
1388 error_exit
"Unsupported CPU = $cpu, try --enable-tcg-interpreter"
1392 # Consult white-list to determine whether to enable werror
1393 # by default. Only enable by default for git builds
1394 z_version
=`cut -f3 -d. $source_path/VERSION`
1396 if test -z "$werror" ; then
1397 if test -d "$source_path/.git" -a \
1398 "$linux" = "yes" ; then
1405 # check that the C compiler works.
1407 int main(void) { return 0; }
1410 if compile_object
; then
1411 : C compiler works ok
1413 error_exit
"\"$cc\" either does not exist or does not work"
1416 # Check that the C++ compiler exists and works with the C compiler
1419 int c_function(void);
1420 int main(void) { return c_function(); }
1427 int c_function(void);
1429 int c_function(void) { return 42; }
1434 if do_cxx
$QEMU_CXXFLAGS -o $TMPE $TMPCXX $TMPO $LDFLAGS; then
1435 # C++ compiler $cxx works ok with C compiler $cc
1438 echo "C++ compiler $cxx does not work with C compiler $cc"
1439 echo "Disabling C++ specific optional code"
1443 echo "No C++ compiler available; disabling C++ specific optional code"
1447 gcc_flags
="-Wold-style-declaration -Wold-style-definition -Wtype-limits"
1448 gcc_flags
="-Wformat-security -Wformat-y2k -Winit-self -Wignored-qualifiers $gcc_flags"
1449 gcc_flags
="-Wmissing-include-dirs -Wempty-body -Wnested-externs $gcc_flags"
1450 gcc_flags
="-Wendif-labels $gcc_flags"
1451 gcc_flags
="-Wno-initializer-overrides $gcc_flags"
1452 gcc_flags
="-Wno-string-plus-int $gcc_flags"
1453 # Note that we do not add -Werror to gcc_flags here, because that would
1454 # enable it for all configure tests. If a configure test failed due
1455 # to -Werror this would just silently disable some features,
1456 # so it's too error prone.
1458 int main(void) { return 0; }
1460 for flag
in $gcc_flags; do
1461 # Use the positive sense of the flag when testing for -Wno-wombat
1462 # support (gcc will happily accept the -Wno- form of unknown
1464 optflag
="$(echo $flag | sed -e 's/^-Wno-/-W/')"
1465 if compile_prog
"-Werror $optflag" "" ; then
1466 QEMU_CFLAGS
="$QEMU_CFLAGS $flag"
1470 if test "$stack_protector" != "no" ; then
1471 gcc_flags
="-fstack-protector-strong -fstack-protector-all"
1472 for flag
in $gcc_flags; do
1473 # We need to check both a compile and a link, since some compiler
1474 # setups fail only on a .c->.o compile and some only at link time
1475 if do_cc
$QEMU_CFLAGS -Werror $flag -c -o $TMPO $TMPC &&
1476 compile_prog
"-Werror $flag" ""; then
1477 QEMU_CFLAGS
="$QEMU_CFLAGS $flag"
1478 LIBTOOLFLAGS
="$LIBTOOLFLAGS -Wc,$flag"
1484 # Workaround for http://gcc.gnu.org/PR55489. Happens with -fPIE/-fPIC and
1485 # large functions that use global variables. The bug is in all releases of
1486 # GCC, but it became particularly acute in 4.6.x and 4.7.x. It is fixed in
1487 # 4.7.3 and 4.8.0. We should be able to delete this at the end of 2013.
1489 #if __GNUC__ == 4 && (__GNUC_MINOR__ == 6 || (__GNUC_MINOR__ == 7 && __GNUC_PATCHLEVEL__ <= 2))
1490 int main(void) { return 0; }
1492 #error No bug in this compiler.
1495 if compile_prog
"-Werror -fno-gcse" "" ; then
1496 TRANSLATE_OPT_CFLAGS
=-fno-gcse
1499 if test "$static" = "yes" ; then
1500 if test "$modules" = "yes" ; then
1501 error_exit
"static and modules are mutually incompatible"
1503 if test "$pie" = "yes" ; then
1504 error_exit
"static and pie are mutually incompatible"
1510 if test "$pie" = ""; then
1511 case "$cpu-$targetos" in
1512 i386-Linux|x86_64-Linux|x32-Linux|i386-OpenBSD|x86_64-OpenBSD
)
1520 if test "$pie" != "no" ; then
1524 # define THREAD __thread
1529 static THREAD int tls_var;
1531 int main(void) { return tls_var; }
1534 if compile_prog
"-fPIE -DPIE" "-pie"; then
1535 QEMU_CFLAGS
="-fPIE -DPIE $QEMU_CFLAGS"
1536 LDFLAGS
="-pie $LDFLAGS"
1538 if compile_prog
"" "-Wl,-z,relro -Wl,-z,now" ; then
1539 LDFLAGS
="-Wl,-z,relro -Wl,-z,now $LDFLAGS"
1542 if test "$pie" = "yes"; then
1543 error_exit
"PIE not available due to missing toolchain support"
1545 echo "Disabling PIE due to missing toolchain support"
1550 if compile_prog
"-fno-pie" "-nopie"; then
1551 CFLAGS_NOPIE
="-fno-pie"
1552 LDFLAGS_NOPIE
="-nopie"
1556 # check for broken gcc and libtool in RHEL5
1557 if test -n "$libtool" -a "$pie" != "no" ; then
1560 void *f(unsigned char *buf, int len);
1561 void *g(unsigned char *buf, int len);
1564 f(unsigned char *buf, int len)
1570 g(unsigned char *buf, int len)
1576 if ! libtool_prog
; then
1577 echo "Disabling libtool due to broken toolchain support"
1582 ##########################################
1583 # __sync_fetch_and_and requires at least -march=i486. Many toolchains
1584 # use i686 as default anyway, but for those that don't, an explicit
1585 # specification is necessary
1587 if test "$cpu" = "i386"; then
1589 static int sfaa(int *ptr)
1591 return __sync_fetch_and_and(ptr, 0);
1597 val = __sync_val_compare_and_swap(&val, 0, 1);
1602 if ! compile_prog
"" "" ; then
1603 QEMU_CFLAGS
="-march=i486 $QEMU_CFLAGS"
1607 #########################################
1608 # Solaris specific configure tool chain decisions
1610 if test "$solaris" = "yes" ; then
1611 if has
$install; then
1614 error_exit
"Solaris install program not found. Use --install=/usr/ucb/install or" \
1615 "install fileutils from www.blastwave.org using pkg-get -i fileutils" \
1616 "to get ginstall which is used by default (which lives in /opt/csw/bin)"
1618 if test "`path_of $install`" = "/usr/sbin/install" ; then
1619 error_exit
"Solaris /usr/sbin/install is not an appropriate install program." \
1620 "try ginstall from the GNU fileutils available from www.blastwave.org" \
1621 "using pkg-get -i fileutils, or use --install=/usr/ucb/install"
1626 if test -f /usr
/ccs
/bin
/ar ; then
1627 error_exit
"No path includes ar" \
1628 "Add /usr/ccs/bin to your path and rerun configure"
1630 error_exit
"No path includes ar"
1634 if test -z "${target_list+xxx}" ; then
1635 target_list
="$default_target_list"
1637 target_list
=`echo "$target_list" | sed -e 's/,/ /g'`
1640 # Check that we recognised the target name; this allows a more
1641 # friendly error message than if we let it fall through.
1642 for target
in $target_list; do
1643 case " $default_target_list " in
1647 error_exit
"Unknown target name '$target'"
1652 # see if system emulation was really requested
1653 case " $target_list " in
1654 *"-softmmu "*) softmmu
=yes
1660 feature_not_found
() {
1664 error_exit
"User requested feature $feature" \
1665 "configure was not able to find it." \
1670 # big/little endian test
1672 short big_endian[] = { 0x4269, 0x4765, 0x4e64, 0x4961, 0x4e00, 0, };
1673 short little_endian[] = { 0x694c, 0x7454, 0x654c, 0x6e45, 0x6944, 0x6e41, 0, };
1674 extern int foo(short *, short *);
1675 int main(int argc, char *argv[]) {
1676 return foo(big_endian, little_endian);
1680 if compile_object
; then
1681 if grep -q BiGeNdIaN
$TMPO ; then
1683 elif grep -q LiTtLeEnDiAn
$TMPO ; then
1686 echo big
/little
test failed
1689 echo big
/little
test failed
1692 ##########################################
1695 if ! has
"$pkg_config_exe"; then
1696 error_exit
"pkg-config binary '$pkg_config_exe' not found"
1699 ##########################################
1702 if test "$linux_user" = "yes"; then
1705 #include <linux/futex.h>
1707 #if !defined(CLONE_SETTLS) || !defined(FUTEX_WAIT)
1713 if ! compile_object
; then
1714 feature_not_found
"nptl" "Install glibc and linux kernel headers."
1718 ##########################################
1721 if test "$zlib" != "no" ; then
1724 int main(void) { zlibVersion(); return 0; }
1726 if compile_prog
"" "-lz" ; then
1729 error_exit
"zlib check failed" \
1730 "Make sure to have the zlib libs and headers installed."
1735 ##########################################
1738 if test "$lzo" != "no" ; then
1740 #include <lzo/lzo1x.h>
1741 int main(void) { lzo_version(); return 0; }
1743 if compile_prog
"" "-llzo2" ; then
1746 error_exit
"lzo check failed" \
1747 "Make sure to have the lzo libs and headers installed."
1750 libs_softmmu
="$libs_softmmu -llzo2"
1753 ##########################################
1756 if test "$snappy" != "no" ; then
1758 #include <snappy-c.h>
1759 int main(void) { snappy_max_compressed_length(4096); return 0; }
1761 if compile_prog
"" "-lsnappy" ; then
1764 error_exit
"snappy check failed" \
1765 "Make sure to have the snappy libs and headers installed."
1768 libs_softmmu
="$libs_softmmu -lsnappy"
1771 ##########################################
1774 if test "$seccomp" != "no" ; then
1775 if $pkg_config --atleast-version=2.1.0 libseccomp
; then
1776 libs_softmmu
="$libs_softmmu `$pkg_config --libs libseccomp`"
1777 QEMU_CFLAGS
="$QEMU_CFLAGS `$pkg_config --cflags libseccomp`"
1780 if test "$seccomp" = "yes"; then
1781 feature_not_found
"libseccomp" "Install libseccomp devel >= 2.1.0"
1786 ##########################################
1789 if test "$xen" != "no" ; then
1790 xen_libs
="-lxenstore -lxenctrl -lxenguest"
1792 # First we test whether Xen headers and libraries are available.
1793 # If no, we are done and there is no Xen support.
1794 # If yes, more tests are run to detect the Xen version.
1798 #include <xenctrl.h>
1803 if ! compile_prog
"" "$xen_libs" ; then
1805 if test "$xen" = "yes" ; then
1806 feature_not_found
"xen" "Install xen devel"
1812 cat > $TMPC <<EOF &&
1813 #include <xenctrl.h>
1814 #include <xenstore.h>
1816 #include <xen/hvm/hvm_info_table.h>
1817 #if !defined(HVM_MAX_VCPUS)
1818 # error HVM_MAX_VCPUS not defined
1823 xc = xc_interface_open(0, 0, 0);
1824 xc_hvm_set_mem_type(0, 0, HVMMEM_ram_ro, 0, 0);
1825 xc_gnttab_open(NULL, 0);
1826 xc_domain_add_to_physmap(0, 0, XENMAPSPACE_gmfn, 0, 0);
1827 xc_hvm_inject_msi(xc, 0, 0xf0000000, 0x00000000);
1831 compile_prog
"" "$xen_libs"
1833 xen_ctrl_version
=420
1837 cat > $TMPC <<EOF &&
1838 #include <xenctrl.h>
1841 #include <xen/hvm/hvm_info_table.h>
1842 #if !defined(HVM_MAX_VCPUS)
1843 # error HVM_MAX_VCPUS not defined
1847 xc_interface_open(0, 0, 0);
1848 xc_hvm_set_mem_type(0, 0, HVMMEM_ram_ro, 0, 0);
1849 xc_gnttab_open(NULL, 0);
1850 xc_domain_add_to_physmap(0, 0, XENMAPSPACE_gmfn, 0, 0);
1854 compile_prog
"" "$xen_libs"
1856 xen_ctrl_version
=410
1861 cat > $TMPC <<EOF &&
1862 #include <xenctrl.h>
1865 #include <xen/hvm/hvm_info_table.h>
1866 #if !defined(HVM_MAX_VCPUS)
1867 # error HVM_MAX_VCPUS not defined
1870 struct xen_add_to_physmap xatp = {
1871 .domid = 0, .space = XENMAPSPACE_gmfn, .idx = 0, .gpfn = 0,
1874 xc_interface_open();
1876 xc_hvm_set_mem_type(0, 0, HVMMEM_ram_ro, 0, 0);
1877 xc_memory_op(0, XENMEM_add_to_physmap, &xatp);
1881 compile_prog
"" "$xen_libs"
1883 xen_ctrl_version
=400
1888 cat > $TMPC <<EOF &&
1889 #include <xenctrl.h>
1892 struct xen_add_to_physmap xatp = {
1893 .domid = 0, .space = XENMAPSPACE_gmfn, .idx = 0, .gpfn = 0,
1896 xc_interface_open();
1898 xc_hvm_set_mem_type(0, 0, HVMMEM_ram_ro, 0, 0);
1899 xc_memory_op(0, XENMEM_add_to_physmap, &xatp);
1903 compile_prog
"" "$xen_libs"
1905 xen_ctrl_version
=340
1910 cat > $TMPC <<EOF &&
1911 #include <xenctrl.h>
1915 xc_interface_open();
1917 xc_hvm_set_mem_type(0, 0, HVMMEM_ram_ro, 0, 0);
1921 compile_prog
"" "$xen_libs"
1923 xen_ctrl_version
=330
1926 # Xen version unsupported
1928 if test "$xen" = "yes" ; then
1929 feature_not_found
"xen (unsupported version)" "Install supported xen (e.g. 4.0, 3.4, 3.3)"
1934 if test "$xen" = yes; then
1935 libs_softmmu
="$xen_libs $libs_softmmu"
1939 if test "$xen_pci_passthrough" != "no"; then
1940 if test "$xen" = "yes" && test "$linux" = "yes" &&
1941 test "$xen_ctrl_version" -ge 340; then
1942 xen_pci_passthrough
=yes
1944 if test "$xen_pci_passthrough" = "yes"; then
1945 if test "$xen_ctrl_version" -lt 340; then
1946 error_exit
"User requested feature Xen PCI Passthrough" \
1947 "This feature does not work with Xen 3.3"
1949 error_exit
"User requested feature Xen PCI Passthrough" \
1950 " but this feature requires /sys from Linux"
1952 xen_pci_passthrough
=no
1956 ##########################################
1959 if ! has
$libtool; then
1963 # MacOSX ships with a libtool which isn't the GNU one; weed this
1964 # out by checking whether libtool supports the --version switch
1965 if test -n "$libtool"; then
1966 if ! "$libtool" --version >/dev
/null
2>&1; then
1971 ##########################################
1973 if test "$sparse" != "no" ; then
1977 if test "$sparse" = "yes" ; then
1978 feature_not_found
"sparse" "Install sparse binary"
1984 ##########################################
1987 if test "$gtkabi" = ""; then
1988 # The GTK ABI was not specified explicitly, so try whether 2.0 is available.
1989 # Use 3.0 as a fallback if that is available.
1990 if $pkg_config --exists "gtk+-2.0 >= 2.18.0"; then
1992 elif $pkg_config --exists "gtk+-3.0 >= 3.0.0"; then
1999 if test "$gtk" != "no"; then
2000 gtkpackage
="gtk+-$gtkabi"
2001 if test "$gtkabi" = "3.0" ; then
2006 if $pkg_config --exists "$gtkpackage >= $gtkversion"; then
2007 gtk_cflags
=`$pkg_config --cflags $gtkpackage`
2008 gtk_libs
=`$pkg_config --libs $gtkpackage`
2009 libs_softmmu
="$gtk_libs $libs_softmmu"
2011 elif test "$gtk" = "yes"; then
2012 feature_not_found
"gtk" "Install gtk2 or gtk3 devel"
2018 ##########################################
2021 if test "$vte" != "no"; then
2022 if test "$gtkabi" = "3.0"; then
2023 vtepackage
="vte-2.90"
2029 if $pkg_config --exists "$vtepackage >= $vteversion"; then
2030 vte_cflags
=`$pkg_config --cflags $vtepackage`
2031 vte_libs
=`$pkg_config --libs $vtepackage`
2032 libs_softmmu
="$vte_libs $libs_softmmu"
2034 elif test "$vte" = "yes"; then
2035 if test "$gtkabi" = "3.0"; then
2036 feature_not_found
"vte" "Install libvte-2.90 devel"
2038 feature_not_found
"vte" "Install libvte devel"
2045 ##########################################
2048 # Look for sdl configuration program (pkg-config or sdl-config). Try
2049 # sdl-config even without cross prefix, and favour pkg-config over sdl-config.
2051 if test $sdlabi = "2.0"; then
2052 sdl_config
=$sdl2_config
2054 sdlconfigname
=sdl2_config
2057 sdlconfigname
=sdl_config
2060 if test "`basename $sdl_config`" != $sdlconfigname && ! has
${sdl_config}; then
2061 sdl_config
=$sdlconfigname
2064 if $pkg_config $sdlname --exists; then
2065 sdlconfig
="$pkg_config $sdlname"
2066 _sdlversion
=`$sdlconfig --modversion 2>/dev/null | sed 's/[^0-9]//g'`
2067 elif has
${sdl_config}; then
2068 sdlconfig
="$sdl_config"
2069 _sdlversion
=`$sdlconfig --version | sed 's/[^0-9]//g'`
2071 if test "$sdl" = "yes" ; then
2072 feature_not_found
"sdl" "Install SDL devel"
2076 if test -n "$cross_prefix" && test "$(basename "$sdlconfig")" = sdl-config
; then
2077 echo warning
: using
"\"$sdlconfig\"" to detect cross-compiled sdl
>&2
2081 if test "$sdl" != "no" ; then
2084 #undef main /* We don't want SDL to override our main() */
2085 int main( void ) { return SDL_Init (SDL_INIT_VIDEO); }
2087 sdl_cflags
=`$sdlconfig --cflags 2> /dev/null`
2088 if test "$static" = "yes" ; then
2089 sdl_libs
=`$sdlconfig --static-libs 2>/dev/null`
2091 sdl_libs
=`$sdlconfig --libs 2> /dev/null`
2093 if compile_prog
"$sdl_cflags" "$sdl_libs" ; then
2094 if test "$_sdlversion" -lt 121 ; then
2097 if test "$cocoa" = "no" ; then
2102 # static link with sdl ? (note: sdl.pc's --static --libs is broken)
2103 if test "$sdl" = "yes" -a "$static" = "yes" ; then
2104 if test $?
= 0 && echo $sdl_libs |
grep -- -laa > /dev
/null
; then
2105 sdl_libs
="$sdl_libs `aalib-config --static-libs 2>/dev/null`"
2106 sdl_cflags
="$sdl_cflags `aalib-config --cflags 2>/dev/null`"
2108 if compile_prog
"$sdl_cflags" "$sdl_libs" ; then
2114 else # sdl not found
2115 if test "$sdl" = "yes" ; then
2116 feature_not_found
"sdl" "Install SDL devel"
2119 fi # sdl compile test
2122 if test "$sdl" = "yes" ; then
2125 #if defined(SDL_VIDEO_DRIVER_X11)
2126 #include <X11/XKBlib.h>
2128 #error No x11 support
2130 int main(void) { return 0; }
2132 if compile_prog
"$sdl_cflags" "$sdl_libs" ; then
2133 sdl_libs
="$sdl_libs -lX11"
2135 libs_softmmu
="$sdl_libs $libs_softmmu"
2138 ##########################################
2139 # RDMA needs OpenFabrics libraries
2140 if test "$rdma" != "no" ; then
2142 #include <rdma/rdma_cma.h>
2143 int main(void) { return 0; }
2145 rdma_libs
="-lrdmacm -libverbs"
2146 if compile_prog
"" "$rdma_libs" ; then
2148 libs_softmmu
="$libs_softmmu $rdma_libs"
2150 if test "$rdma" = "yes" ; then
2152 " OpenFabrics librdmacm/libibverbs not present." \
2154 " (1) Fast: Install infiniband packages from your distro." \
2155 " (2) Cleanest: Install libraries from www.openfabrics.org" \
2156 " (3) Also: Install softiwarp if you don't have RDMA hardware"
2162 ##########################################
2163 # VNC TLS/WS detection
2164 if test "$vnc" = "yes" -a \
( "$vnc_tls" != "no" -o "$vnc_ws" != "no" \
) ; then
2166 #include <gnutls/gnutls.h>
2167 int main(void) { gnutls_session_t s; gnutls_init(&s, GNUTLS_SERVER); return 0; }
2169 vnc_tls_cflags
=`$pkg_config --cflags gnutls 2> /dev/null`
2170 vnc_tls_libs
=`$pkg_config --libs gnutls 2> /dev/null`
2171 if compile_prog
"$vnc_tls_cflags" "$vnc_tls_libs" ; then
2172 if test "$vnc_tls" != "no" ; then
2175 if test "$vnc_ws" != "no" ; then
2178 libs_softmmu
="$vnc_tls_libs $libs_softmmu"
2179 QEMU_CFLAGS
="$QEMU_CFLAGS $vnc_tls_cflags"
2181 if test "$vnc_tls" = "yes" ; then
2182 feature_not_found
"vnc-tls" "Install gnutls devel"
2184 if test "$vnc_ws" = "yes" ; then
2185 feature_not_found
"vnc-ws" "Install gnutls devel"
2192 ##########################################
2193 # Quorum probe (check for gnutls)
2194 if test "$quorum" != "no" ; then
2196 #include <gnutls/gnutls.h>
2197 #include <gnutls/crypto.h>
2198 int main(void) {char data[4096], digest[32];
2199 gnutls_hash_fast(GNUTLS_DIG_SHA256, data, 4096, digest);
2203 quorum_tls_cflags
=`$pkg_config --cflags gnutls 2> /dev/null`
2204 quorum_tls_libs
=`$pkg_config --libs gnutls 2> /dev/null`
2205 if compile_prog
"$quorum_tls_cflags" "$quorum_tls_libs" ; then
2207 libs_softmmu
="$quorum_tls_libs $libs_softmmu"
2208 libs_tools
="$quorum_tls_libs $libs_softmmu"
2209 QEMU_CFLAGS
="$QEMU_CFLAGS $quorum_tls_cflags"
2211 echo "gnutls > 2.10.0 required to compile Quorum"
2216 ##########################################
2217 # VNC SASL detection
2218 if test "$vnc" = "yes" -a "$vnc_sasl" != "no" ; then
2220 #include <sasl/sasl.h>
2222 int main(void) { sasl_server_init(NULL, "qemu"); return 0; }
2224 # Assuming Cyrus-SASL installed in /usr prefix
2226 vnc_sasl_libs
="-lsasl2"
2227 if compile_prog
"$vnc_sasl_cflags" "$vnc_sasl_libs" ; then
2229 libs_softmmu
="$vnc_sasl_libs $libs_softmmu"
2230 QEMU_CFLAGS
="$QEMU_CFLAGS $vnc_sasl_cflags"
2232 if test "$vnc_sasl" = "yes" ; then
2233 feature_not_found
"vnc-sasl" "Install Cyrus SASL devel"
2239 ##########################################
2240 # VNC JPEG detection
2241 if test "$vnc" = "yes" -a "$vnc_jpeg" != "no" ; then
2244 #include <jpeglib.h>
2245 int main(void) { struct jpeg_compress_struct s; jpeg_create_compress(&s); return 0; }
2248 vnc_jpeg_libs
="-ljpeg"
2249 if compile_prog
"$vnc_jpeg_cflags" "$vnc_jpeg_libs" ; then
2251 libs_softmmu
="$vnc_jpeg_libs $libs_softmmu"
2252 QEMU_CFLAGS
="$QEMU_CFLAGS $vnc_jpeg_cflags"
2254 if test "$vnc_jpeg" = "yes" ; then
2255 feature_not_found
"vnc-jpeg" "Install libjpeg-turbo devel"
2261 ##########################################
2263 if test "$vnc" = "yes" -a "$vnc_png" != "no" ; then
2265 //#include <stdio.h>
2269 png_structp png_ptr;
2270 png_ptr = png_create_write_struct(PNG_LIBPNG_VER_STRING, NULL, NULL, NULL);
2271 return png_ptr != 0;
2274 if $pkg_config libpng
--exists; then
2275 vnc_png_cflags
=`$pkg_config libpng --cflags`
2276 vnc_png_libs
=`$pkg_config libpng --libs`
2279 vnc_png_libs
="-lpng"
2281 if compile_prog
"$vnc_png_cflags" "$vnc_png_libs" ; then
2283 libs_softmmu
="$vnc_png_libs $libs_softmmu"
2284 QEMU_CFLAGS
="$QEMU_CFLAGS $vnc_png_cflags"
2286 if test "$vnc_png" = "yes" ; then
2287 feature_not_found
"vnc-png" "Install libpng devel"
2293 ##########################################
2294 # fnmatch() probe, used for ACL routines
2297 #include <fnmatch.h>
2300 fnmatch("foo", "foo", 0);
2304 if compile_prog
"" "" ; then
2308 ##########################################
2309 # uuid_generate() probe, used for vdi block driver
2310 # Note that on some systems (notably MacOSX) no extra library
2311 # need be linked to get the uuid functions.
2312 if test "$uuid" != "no" ; then
2315 #include <uuid/uuid.h>
2319 uuid_generate(my_uuid);
2323 if compile_prog
"" "" ; then
2325 elif compile_prog
"" "$uuid_libs" ; then
2327 libs_softmmu
="$uuid_libs $libs_softmmu"
2328 libs_tools
="$uuid_libs $libs_tools"
2330 if test "$uuid" = "yes" ; then
2331 feature_not_found
"uuid" "Install libuuid devel"
2337 if test "$vhdx" = "yes" ; then
2338 if test "$uuid" = "no" ; then
2339 error_exit
"uuid required for VHDX support"
2341 elif test "$vhdx" != "no" ; then
2342 if test "$uuid" = "yes" ; then
2349 ##########################################
2350 # xfsctl() probe, used for raw-posix
2351 if test "$xfs" != "no" ; then
2353 #include <stddef.h> /* NULL */
2354 #include <xfs/xfs.h>
2357 xfsctl(NULL, 0, 0, NULL);
2361 if compile_prog
"" "" ; then
2364 if test "$xfs" = "yes" ; then
2365 feature_not_found
"xfs" "Instal xfsprogs/xfslibs devel"
2371 ##########################################
2372 # vde libraries probe
2373 if test "$vde" != "no" ; then
2374 vde_libs
="-lvdeplug"
2376 #include <libvdeplug.h>
2379 struct vde_open_args a = {0, 0, 0};
2385 if compile_prog
"" "$vde_libs" ; then
2387 libs_softmmu
="$vde_libs $libs_softmmu"
2388 libs_tools
="$vde_libs $libs_tools"
2390 if test "$vde" = "yes" ; then
2391 feature_not_found
"vde" "Install vde (Virtual Distributed Ethernet) devel"
2397 ##########################################
2398 # netmap support probe
2399 # Apart from looking for netmap headers, we make sure that the host API version
2400 # supports the netmap backend (>=11). The upper bound (15) is meant to simulate
2401 # a minor/major version number. Minor new features will be marked with values up
2402 # to 15, and if something happens that requires a change to the backend we will
2403 # move above 15, submit the backend fixes and modify this two bounds.
2404 if test "$netmap" != "no" ; then
2406 #include <inttypes.h>
2408 #include <net/netmap.h>
2409 #include <net/netmap_user.h>
2410 #if (NETMAP_API < 11) || (NETMAP_API > 15)
2413 int main(void) { return 0; }
2415 if compile_prog
"" "" ; then
2418 if test "$netmap" = "yes" ; then
2419 feature_not_found
"netmap"
2425 ##########################################
2426 # libcap-ng library probe
2427 if test "$cap_ng" != "no" ; then
2433 capng_capability_to_name(CAPNG_EFFECTIVE);
2437 if compile_prog
"" "$cap_libs" ; then
2439 libs_tools
="$cap_libs $libs_tools"
2441 if test "$cap_ng" = "yes" ; then
2442 feature_not_found
"cap_ng" "Install libcap-ng devel"
2448 ##########################################
2449 # Sound support libraries probe
2460 int main(void) { $exp }
2462 if compile_prog
"$cfl" "$lib" ; then
2465 error_exit
"$drv check failed" \
2466 "Make sure to have the $drv libs and headers installed."
2470 audio_drv_list
=`echo "$audio_drv_list" | sed -e 's/,/ /g'`
2471 for drv
in $audio_drv_list; do
2474 audio_drv_probe
$drv alsa
/asoundlib.h
-lasound \
2475 "return snd_pcm_close((snd_pcm_t *)0);"
2476 libs_softmmu
="-lasound $libs_softmmu"
2480 if test -z $fmod_lib ||
test -z $fmod_inc; then
2481 error_exit
"You must specify path to FMOD library and headers" \
2482 "Example: --fmod-inc=/path/include/fmod --fmod-lib=/path/lib/libfmod-3.74.so"
2484 audio_drv_probe
$drv fmod.h
$fmod_lib "return FSOUND_GetVersion();" "-I $fmod_inc"
2485 libs_softmmu
="$fmod_lib $libs_softmmu"
2489 audio_drv_probe
$drv esd.h
-lesd 'return esd_play_stream(0, 0, "", 0);'
2490 libs_softmmu
="-lesd $libs_softmmu"
2495 audio_drv_probe
$drv pulse
/mainloop.h
"-lpulse" \
2496 "pa_mainloop *m = 0; pa_mainloop_free (m); return 0;"
2497 libs_softmmu
="-lpulse $libs_softmmu"
2502 libs_softmmu
="-framework CoreAudio $libs_softmmu"
2506 libs_softmmu
="-lole32 -ldxguid $libs_softmmu"
2511 libs_softmmu
="$oss_lib $libs_softmmu"
2515 # XXX: Probes for CoreAudio, DirectSound, SDL(?)
2519 libs_softmmu
="-lwinmm $libs_softmmu"
2524 echo "$audio_possible_drivers" |
grep -q "\<$drv\>" ||
{
2525 error_exit
"Unknown driver '$drv' selected" \
2526 "Possible drivers are: $audio_possible_drivers"
2532 ##########################################
2535 if test "$brlapi" != "no" ; then
2536 brlapi_libs
="-lbrlapi"
2540 int main( void ) { return brlapi__openConnection (NULL, NULL, NULL); }
2542 if compile_prog
"" "$brlapi_libs" ; then
2544 libs_softmmu
="$brlapi_libs $libs_softmmu"
2546 if test "$brlapi" = "yes" ; then
2547 feature_not_found
"brlapi" "Install brlapi devel"
2553 ##########################################
2555 if test "$curses" != "no" ; then
2556 if test "$mingw32" = "yes" ; then
2557 curses_list
="-lpdcurses"
2559 curses_list
="$($pkg_config --libs ncurses 2>/dev/null):-lncurses:-lcurses"
2565 const char *s = curses_version();
2571 for curses_lib
in $curses_list; do
2573 if compile_prog
"" "$curses_lib" ; then
2575 libs_softmmu
="$curses_lib $libs_softmmu"
2580 if test "$curses_found" = "yes" ; then
2583 if test "$curses" = "yes" ; then
2584 feature_not_found
"curses" "Install ncurses devel"
2590 ##########################################
2592 if test "$curl" != "no" ; then
2593 if $pkg_config libcurl
--exists; then
2594 curlconfig
="$pkg_config libcurl"
2596 curlconfig
=curl-config
2599 #include <curl/curl.h>
2600 int main(void) { curl_easy_init(); curl_multi_setopt(0, 0, 0); return 0; }
2602 curl_cflags
=`$curlconfig --cflags 2>/dev/null`
2603 curl_libs
=`$curlconfig --libs 2>/dev/null`
2604 if compile_prog
"$curl_cflags" "$curl_libs" ; then
2607 if test "$curl" = "yes" ; then
2608 feature_not_found
"curl" "Install libcurl devel"
2614 ##########################################
2615 # bluez support probe
2616 if test "$bluez" != "no" ; then
2618 #include <bluetooth/bluetooth.h>
2619 int main(void) { return bt_error(0); }
2621 bluez_cflags
=`$pkg_config --cflags bluez 2> /dev/null`
2622 bluez_libs
=`$pkg_config --libs bluez 2> /dev/null`
2623 if compile_prog
"$bluez_cflags" "$bluez_libs" ; then
2625 libs_softmmu
="$bluez_libs $libs_softmmu"
2627 if test "$bluez" = "yes" ; then
2628 feature_not_found
"bluez" "Install bluez-libs/libbluetooth devel"
2634 ##########################################
2635 # glib support probe
2637 if test "$mingw32" = yes; then
2638 # g_poll is required in order to integrate with the glib main loop.
2643 glib_modules
=gthread-2.0
2644 if test "$modules" = yes; then
2645 glib_modules
="$glib_modules gmodule-2.0"
2648 for i
in $glib_modules; do
2649 if $pkg_config --atleast-version=$glib_req_ver $i; then
2650 glib_cflags
=`$pkg_config --cflags $i`
2651 glib_libs
=`$pkg_config --libs $i`
2652 CFLAGS
="$glib_cflags $CFLAGS"
2653 LIBS
="$glib_libs $LIBS"
2654 libs_qga
="$glib_libs $libs_qga"
2656 error_exit
"glib-$glib_req_ver $i is required to compile QEMU"
2660 ##########################################
2661 # SHA command probe for modules
2662 if test "$modules" = yes; then
2663 shacmd_probe
="sha1sum sha1 shasum"
2664 for c
in $shacmd_probe; do
2665 if which $c >/dev
/null
2>&1; then
2670 if test "$shacmd" = ""; then
2671 error_exit
"one of the checksum commands is required to enable modules: $shacmd_probe"
2675 ##########################################
2676 # pixman support probe
2678 if test "$pixman" = ""; then
2679 if test "$want_tools" = "no" -a "$softmmu" = "no"; then
2681 elif $pkg_config pixman-1
> /dev
/null
2>&1; then
2687 if test "$pixman" = "none"; then
2688 if test "$want_tools" != "no" -o "$softmmu" != "no"; then
2689 error_exit
"pixman disabled but system emulation or tools build" \
2690 "enabled. You can turn off pixman only if you also" \
2691 "disable all system emulation targets and the tools" \
2692 "build with '--disable-tools --disable-system'."
2696 elif test "$pixman" = "system"; then
2697 pixman_cflags
=`$pkg_config --cflags pixman-1`
2698 pixman_libs
=`$pkg_config --libs pixman-1`
2700 if test ! -d ${source_path}/pixman
/pixman
; then
2701 error_exit
"pixman not present. Your options:" \
2702 " (1) Preferred: Install the pixman devel package (any recent" \
2703 " distro should have packages as Xorg needs pixman too)." \
2704 " (2) Fetch the pixman submodule, using:" \
2705 " git submodule update --init pixman"
2707 mkdir
-p pixman
/pixman
2708 pixman_cflags
="-I\$(SRC_PATH)/pixman/pixman -I\$(BUILD_DIR)/pixman/pixman"
2709 pixman_libs
="-L\$(BUILD_DIR)/pixman/pixman/.libs -lpixman-1"
2712 ##########################################
2715 if test "$cap" != "no" ; then
2718 #include <sys/capability.h>
2719 int main(void) { cap_t caps; caps = cap_init(); return caps != NULL; }
2721 if compile_prog
"" "-lcap" ; then
2728 ##########################################
2730 PTHREADLIBS_LIST
="-pthread -lpthread -lpthreadGC2"
2734 #include <pthread.h>
2735 static void *f(void *p) { return NULL; }
2738 pthread_create(&thread, 0, f, 0);
2742 if compile_prog
"" "" ; then
2745 for pthread_lib
in $PTHREADLIBS_LIST; do
2746 if compile_prog
"" "$pthread_lib" ; then
2749 for lib_entry
in $LIBS; do
2750 if test "$lib_entry" = "$pthread_lib"; then
2755 if test "$found" = "no"; then
2756 LIBS
="$pthread_lib $LIBS"
2763 if test "$mingw32" != yes -a "$pthread" = no
; then
2764 error_exit
"pthread check failed" \
2765 "Make sure to have the pthread libs and headers installed."
2768 # check for pthread_setname_np
2769 pthread_setname_np
=no
2771 #include <pthread.h>
2773 static void *f(void *p) { return NULL; }
2777 pthread_create(&thread, 0, f, 0);
2778 pthread_setname_np(thread, "QEMU");
2782 if compile_prog
"" "$pthread_lib" ; then
2783 pthread_setname_np
=yes
2786 ##########################################
2788 if test "$rbd" != "no" ; then
2791 #include <rbd/librbd.h>
2794 rados_create(&cluster, NULL);
2798 rbd_libs
="-lrbd -lrados"
2799 if compile_prog
"" "$rbd_libs" ; then
2802 if test "$rbd" = "yes" ; then
2803 feature_not_found
"rados block device" "Install librbd/ceph devel"
2809 ##########################################
2811 min_libssh2_version
=1.2.8
2812 if test "$libssh2" != "no" ; then
2813 if $pkg_config --atleast-version=$min_libssh2_version libssh2
; then
2814 libssh2_cflags
=`$pkg_config libssh2 --cflags`
2815 libssh2_libs
=`$pkg_config libssh2 --libs`
2818 if test "$libssh2" = "yes" ; then
2819 error_exit
"libssh2 >= $min_libssh2_version required for --enable-libssh2"
2825 ##########################################
2826 # libssh2_sftp_fsync probe
2828 if test "$libssh2" = "yes"; then
2831 #include <libssh2.h>
2832 #include <libssh2_sftp.h>
2834 LIBSSH2_SESSION *session;
2836 LIBSSH2_SFTP_HANDLE *sftp_handle;
2837 session = libssh2_session_init ();
2838 sftp = libssh2_sftp_init (session);
2839 sftp_handle = libssh2_sftp_open (sftp, "/", 0, 0);
2840 libssh2_sftp_fsync (sftp_handle);
2844 # libssh2_cflags/libssh2_libs defined in previous test.
2845 if compile_prog
"$libssh2_cflags" "$libssh2_libs" ; then
2846 QEMU_CFLAGS
="-DHAS_LIBSSH2_SFTP_FSYNC $QEMU_CFLAGS"
2850 ##########################################
2853 if test "$linux_aio" != "no" ; then
2856 #include <sys/eventfd.h>
2858 int main(void) { io_setup(0, NULL); io_set_eventfd(NULL, 0); eventfd(0, 0); return 0; }
2860 if compile_prog
"" "-laio" ; then
2863 if test "$linux_aio" = "yes" ; then
2864 feature_not_found
"linux AIO" "Install libaio devel"
2870 ##########################################
2871 # TPM passthrough is only on x86 Linux
2873 if test "$targetos" = Linux
&& test "$cpu" = i386
-o "$cpu" = x86_64
; then
2874 tpm_passthrough
=$tpm
2879 ##########################################
2880 # adjust virtio-blk-data-plane based on linux-aio
2882 if test "$virtio_blk_data_plane" = "yes" -a \
2883 "$linux_aio" != "yes" ; then
2884 error_exit
"virtio-blk-data-plane requires Linux AIO, please try --enable-linux-aio"
2885 elif test -z "$virtio_blk_data_plane" ; then
2886 virtio_blk_data_plane
=$linux_aio
2889 ##########################################
2892 if test "$attr" != "no" ; then
2895 #include <sys/types.h>
2896 #ifdef CONFIG_LIBATTR
2897 #include <attr/xattr.h>
2899 #include <sys/xattr.h>
2901 int main(void) { getxattr(NULL, NULL, NULL, 0); setxattr(NULL, NULL, NULL, 0, 0); return 0; }
2903 if compile_prog
"" "" ; then
2905 # Older distros have <attr/xattr.h>, and need -lattr:
2906 elif compile_prog
"-DCONFIG_LIBATTR" "-lattr" ; then
2911 if test "$attr" = "yes" ; then
2912 feature_not_found
"ATTR" "Install libc6 or libattr devel"
2918 ##########################################
2921 #include <sys/types.h>
2922 #include <sys/uio.h>
2924 int main(void) { return sizeof(struct iovec); }
2927 if compile_prog
"" "" ; then
2931 ##########################################
2934 #include <sys/types.h>
2935 #include <sys/uio.h>
2937 int main(void) { return preadv(0, 0, 0, 0); }
2940 if compile_prog
"" "" ; then
2944 ##########################################
2946 # fdt support is mandatory for at least some target architectures,
2947 # so insist on it if we're building those system emulators.
2949 for target
in $target_list; do
2951 aarch64
*-softmmu|arm
*-softmmu|ppc
*-softmmu|microblaze
*-softmmu)
2957 if test "$fdt_required" = "yes"; then
2958 if test "$fdt" = "no"; then
2959 error_exit
"fdt disabled but some requested targets require it." \
2960 "You can turn off fdt only if you also disable all the system emulation" \
2961 "targets which need it (by specifying a cut down --target-list)."
2966 if test "$fdt" != "no" ; then
2968 # explicitly check for libfdt_env.h as it is missing in some stable installs
2970 #include <libfdt_env.h>
2971 int main(void) { return 0; }
2973 if compile_prog
"" "$fdt_libs" ; then
2974 # system DTC is good - use it
2976 elif test -d ${source_path}/dtc
/libfdt
; then
2977 # have submodule DTC - use it
2981 if [ "$pwd_is_source_path" != "y" ] ; then
2982 symlink
"$source_path/dtc/Makefile" "dtc/Makefile"
2983 symlink
"$source_path/dtc/scripts" "dtc/scripts"
2985 fdt_cflags
="-I\$(SRC_PATH)/dtc/libfdt"
2986 fdt_libs
="-L\$(BUILD_DIR)/dtc/libfdt $fdt_libs"
2987 elif test "$fdt" = "yes" ; then
2988 # have neither and want - prompt for system/submodule install
2989 error_exit
"DTC (libfdt) not present. Your options:" \
2990 " (1) Preferred: Install the DTC (libfdt) devel package" \
2991 " (2) Fetch the DTC submodule, using:" \
2992 " git submodule update --init dtc"
2994 # don't have and don't want
3000 libs_softmmu
="$libs_softmmu $fdt_libs"
3002 ##########################################
3003 # GLX probe, used by milkymist-tmu2
3004 if test "$glx" != "no" ; then
3005 glx_libs
="-lGL -lX11"
3007 #include <X11/Xlib.h>
3010 int main(void) { glBegin(0); glXQueryVersion(0,0,0); return 0; }
3012 if compile_prog
"" "-lGL -lX11" ; then
3015 if test "$glx" = "yes" ; then
3016 feature_not_found
"glx" "Install GL devel (e.g. MESA)"
3023 ##########################################
3025 if test "$glusterfs" != "no" ; then
3026 if $pkg_config --atleast-version=3 glusterfs-api
; then
3028 glusterfs_cflags
=`$pkg_config --cflags glusterfs-api`
3029 glusterfs_libs
=`$pkg_config --libs glusterfs-api`
3030 if $pkg_config --atleast-version=5 glusterfs-api
; then
3031 glusterfs_discard
="yes"
3033 if $pkg_config --atleast-version=6 glusterfs-api
; then
3034 glusterfs_zerofill
="yes"
3037 if test "$glusterfs" = "yes" ; then
3038 feature_not_found
"GlusterFS backend support" "Install glusterfs-api devel"
3044 # Check for inotify functions when we are building linux-user
3045 # emulator. This is done because older glibc versions don't
3046 # have syscall stubs for these implemented. In that case we
3047 # don't provide them even if kernel supports them.
3051 #include <sys/inotify.h>
3056 /* try to start inotify */
3057 return inotify_init();
3060 if compile_prog
"" "" ; then
3066 #include <sys/inotify.h>
3071 /* try to start inotify */
3072 return inotify_init1(0);
3075 if compile_prog
"" "" ; then
3079 # check if utimensat and futimens are supported
3082 #define _ATFILE_SOURCE
3085 #include <sys/stat.h>
3089 utimensat(AT_FDCWD, "foo", NULL, 0);
3094 if compile_prog
"" "" ; then
3098 # check if pipe2 is there
3107 return pipe2(pipefd, O_CLOEXEC);
3110 if compile_prog
"" "" ; then
3114 # check if accept4 is there
3117 #include <sys/socket.h>
3122 accept4(0, NULL, NULL, SOCK_CLOEXEC);
3126 if compile_prog
"" "" ; then
3130 # check if tee/splice is there. vmsplice was added same time.
3140 len = tee(STDIN_FILENO, STDOUT_FILENO, INT_MAX, SPLICE_F_NONBLOCK);
3141 splice(STDIN_FILENO, NULL, fd, NULL, len, SPLICE_F_MOVE);
3145 if compile_prog
"" "" ; then
3149 ##########################################
3154 #include <sys/syscall.h>
3156 int main(void) { return syscall(SYS_signalfd, -1, NULL, _NSIG / 8); }
3159 if compile_prog
"" "" ; then
3163 # check if eventfd is supported
3166 #include <sys/eventfd.h>
3170 return eventfd(0, EFD_NONBLOCK | EFD_CLOEXEC);
3173 if compile_prog
"" "" ; then
3177 # check for fallocate
3184 fallocate(0, 0, 0, 0);
3188 if compile_prog
"" "" ; then
3192 # check for fallocate hole punching
3193 fallocate_punch_hole
=no
3196 #include <linux/falloc.h>
3200 fallocate(0, FALLOC_FL_PUNCH_HOLE | FALLOC_FL_KEEP_SIZE, 0, 0);
3204 if compile_prog
"" "" ; then
3205 fallocate_punch_hole
=yes
3208 # check for sync_file_range
3215 sync_file_range(0, 0, 0, 0);
3219 if compile_prog
"" "" ; then
3223 # check for linux/fiemap.h and FS_IOC_FIEMAP
3226 #include <sys/ioctl.h>
3227 #include <linux/fs.h>
3228 #include <linux/fiemap.h>
3232 ioctl(0, FS_IOC_FIEMAP, 0);
3236 if compile_prog
"" "" ; then
3251 if compile_prog
"" "" ; then
3255 # check for ppoll support
3262 struct pollfd pfd = { .fd = 0, .events = 0, .revents = 0 };
3263 ppoll(&pfd, 1, 0, 0);
3267 if compile_prog
"" "" ; then
3271 # check for prctl(PR_SET_TIMERSLACK , ... ) support
3272 prctl_pr_set_timerslack
=no
3274 #include <sys/prctl.h>
3278 prctl(PR_SET_TIMERSLACK, 1, 0, 0, 0);
3282 if compile_prog
"" "" ; then
3283 prctl_pr_set_timerslack
=yes
3286 # check for epoll support
3289 #include <sys/epoll.h>
3297 if compile_prog
"" "" ; then
3301 # epoll_create1 and epoll_pwait are later additions
3302 # so we must check separately for their presence
3305 #include <sys/epoll.h>
3309 /* Note that we use epoll_create1 as a value, not as
3310 * a function being called. This is necessary so that on
3311 * old SPARC glibc versions where the function was present in
3312 * the library but not declared in the header file we will
3313 * fail the configure check. (Otherwise we will get a compiler
3314 * warning but not an error, and will proceed to fail the
3315 * qemu compile where we compile with -Werror.)
3317 return (int)(uintptr_t)&epoll_create1;
3320 if compile_prog
"" "" ; then
3326 #include <sys/epoll.h>
3330 epoll_pwait(0, 0, 0, 0, 0);
3334 if compile_prog
"" "" ; then
3338 # check for sendfile support
3341 #include <sys/sendfile.h>
3345 return sendfile(0, 0, 0, 0);
3348 if compile_prog
"" "" ; then
3352 # Check if tools are available to build documentation.
3353 if test "$docs" != "no" ; then
3354 if has makeinfo
&& has pod2man
; then
3357 if test "$docs" = "yes" ; then
3358 feature_not_found
"docs" "Install texinfo and Perl/perl-podlators"
3364 # Search for bswap_32 function
3367 #include <byteswap.h>
3368 int main(void) { return bswap_32(0); }
3370 if compile_prog
"" "" ; then
3374 # Search for bswap32 function
3377 #include <sys/endian.h>
3378 #include <sys/types.h>
3379 #include <machine/bswap.h>
3380 int main(void) { return bswap32(0); }
3382 if compile_prog
"" "" ; then
3386 ##########################################
3387 # Do we have libiscsi
3388 # We check for iscsi_write16_sync() to make sure we have a
3389 # at least version 1.4.0 of libiscsi.
3390 if test "$libiscsi" != "no" ; then
3393 #include <iscsi/iscsi.h>
3394 int main(void) { iscsi_write16_sync(NULL,0,0,NULL,0,0,0,0,0,0,0); return 0; }
3396 if $pkg_config --atleast-version=1.7.0 libiscsi
; then
3398 libiscsi_cflags
=$
($pkg_config --cflags libiscsi
)
3399 libiscsi_libs
=$
($pkg_config --libs libiscsi
)
3400 elif compile_prog
"" "-liscsi" ; then
3402 libiscsi_libs
="-liscsi"
3404 if test "$libiscsi" = "yes" ; then
3405 feature_not_found
"libiscsi" "Install libiscsi devel"
3411 # We also need to know the API version because there was an
3412 # API change from 1.4.0 to 1.5.0.
3413 if test "$libiscsi" = "yes"; then
3415 #include <iscsi/iscsi.h>
3418 iscsi_read10_task(0, 0, 0, 0, 0, 0, 0);
3422 if compile_prog
"" "-liscsi"; then
3423 libiscsi_version
="1.4.0"
3427 ##########################################
3431 int main(void) { return isnan(sin(0.0)); }
3433 if compile_prog
"" "" ; then
3435 elif compile_prog
"" "-lm" ; then
3437 libs_qga
="-lm $libs_qga"
3439 error_exit
"libm check failed"
3442 ##########################################
3444 # uClibc provides 2 versions of clock_gettime(), one with realtime
3445 # support and one without. This means that the clock_gettime() don't
3446 # need -lrt. We still need it for timer_create() so we check for this
3447 # function in addition.
3452 timer_create(CLOCK_REALTIME, NULL, NULL);
3453 return clock_gettime(CLOCK_REALTIME, NULL);
3457 if compile_prog
"" "" ; then
3459 # we need pthread for static linking. use previous pthread test result
3460 elif compile_prog
"" "$pthread_lib -lrt" ; then
3462 libs_qga
="$libs_qga -lrt"
3465 if test "$darwin" != "yes" -a "$mingw32" != "yes" -a "$solaris" != yes -a \
3466 "$aix" != "yes" -a "$haiku" != "yes" ; then
3467 libs_softmmu
="-lutil $libs_softmmu"
3470 ##########################################
3472 if test "$spice" != "no" ; then
3475 int main(void) { spice_server_new(); return 0; }
3477 spice_cflags
=$
($pkg_config --cflags spice-protocol spice-server
2>/dev
/null
)
3478 spice_libs
=$
($pkg_config --libs spice-protocol spice-server
2>/dev
/null
)
3479 if $pkg_config --atleast-version=0.12.0 spice-server
&& \
3480 $pkg_config --atleast-version=0.12.3 spice-protocol
&& \
3481 compile_prog
"$spice_cflags" "$spice_libs" ; then
3483 libs_softmmu
="$libs_softmmu $spice_libs"
3484 QEMU_CFLAGS
="$QEMU_CFLAGS $spice_cflags"
3485 spice_protocol_version
=$
($pkg_config --modversion spice-protocol
)
3486 spice_server_version
=$
($pkg_config --modversion spice-server
)
3488 if test "$spice" = "yes" ; then
3489 feature_not_found
"spice" "Install spice-server and spice-protocol devel"
3495 # check for libcacard for smartcard support
3497 # TODO - what's the minimal nss version we support?
3498 if test "$smartcard_nss" != "no"; then
3500 #include <pk11pub.h>
3501 int main(void) { PK11_FreeSlot(0); return 0; }
3503 # FIXME: do not include $glib_* in here
3504 nss_libs
="$($pkg_config --libs nss 2>/dev/null) $glib_libs"
3505 nss_cflags
="$($pkg_config --cflags nss 2>/dev/null) $glib_cflags"
3506 test_cflags
="$nss_cflags"
3507 # The header files in nss < 3.13.3 have a bug which causes them to
3508 # emit a warning. If we're going to compile QEMU with -Werror, then
3509 # test that the headers don't have this bug. Otherwise we would pass
3510 # the configure test but fail to compile QEMU later.
3511 if test "$werror" = "yes"; then
3512 test_cflags
="-Werror $test_cflags"
3514 if test -n "$libtool" &&
3515 $pkg_config --atleast-version=3.12.8 nss
&& \
3516 compile_prog
"$test_cflags" "$nss_libs"; then
3519 if test "$smartcard_nss" = "yes"; then
3520 feature_not_found
"nss"
3527 if test "$libusb" != "no" ; then
3528 if $pkg_config --atleast-version=1.0.13 libusb-1.0
; then
3530 libusb_cflags
=$
($pkg_config --cflags libusb-1.0
)
3531 libusb_libs
=$
($pkg_config --libs libusb-1.0
)
3532 QEMU_CFLAGS
="$QEMU_CFLAGS $libusb_cflags"
3533 libs_softmmu
="$libs_softmmu $libusb_libs"
3535 if test "$libusb" = "yes"; then
3536 feature_not_found
"libusb" "Install libusb devel"
3542 # check for usbredirparser for usb network redirection support
3543 if test "$usb_redir" != "no" ; then
3544 if $pkg_config --atleast-version=0.6 libusbredirparser-0.5
; then
3546 usb_redir_cflags
=$
($pkg_config --cflags libusbredirparser-0.5
)
3547 usb_redir_libs
=$
($pkg_config --libs libusbredirparser-0.5
)
3548 QEMU_CFLAGS
="$QEMU_CFLAGS $usb_redir_cflags"
3549 libs_softmmu
="$libs_softmmu $usb_redir_libs"
3551 if test "$usb_redir" = "yes"; then
3552 feature_not_found
"usb-redir" "Install usbredir devel"
3558 ##########################################
3559 # check if we have VSS SDK headers for win
3561 if test "$mingw32" = "yes" -a "$guest_agent" != "no" -a "$vss_win32_sdk" != "no" ; then
3562 case "$vss_win32_sdk" in
3563 "") vss_win32_include
="-I$source_path" ;;
3564 *\
*) # The SDK is installed in "Program Files" by default, but we cannot
3565 # handle path with spaces. So we symlink the headers into ".sdk/vss".
3566 vss_win32_include
="-I$source_path/.sdk/vss"
3567 symlink
"$vss_win32_sdk/inc" "$source_path/.sdk/vss/inc"
3569 *) vss_win32_include
="-I$vss_win32_sdk"
3572 #define __MIDL_user_allocate_free_DEFINED__
3573 #include <inc/win2003/vss.h>
3574 int main(void) { return VSS_CTX_BACKUP; }
3576 if compile_prog
"$vss_win32_include" "" ; then
3577 guest_agent_with_vss
="yes"
3578 QEMU_CFLAGS
="$QEMU_CFLAGS $vss_win32_include"
3579 libs_qga
="-lole32 -loleaut32 -lshlwapi -luuid -lstdc++ -Wl,--enable-stdcall-fixup $libs_qga"
3581 if test "$vss_win32_sdk" != "" ; then
3582 echo "ERROR: Please download and install Microsoft VSS SDK:"
3583 echo "ERROR: http://www.microsoft.com/en-us/download/details.aspx?id=23490"
3584 echo "ERROR: On POSIX-systems, you can extract the SDK headers by:"
3585 echo "ERROR: scripts/extract-vsssdk-headers setup.exe"
3586 echo "ERROR: The headers are extracted in the directory \`inc'."
3587 feature_not_found
"VSS support"
3589 guest_agent_with_vss
="no"
3593 ##########################################
3594 # lookup Windows platform SDK (if not specified)
3595 # The SDK is needed only to build .tlb (type library) file of guest agent
3596 # VSS provider from the source. It is usually unnecessary because the
3597 # pre-compiled .tlb file is included.
3599 if test "$mingw32" = "yes" -a "$guest_agent" != "no" -a "$guest_agent_with_vss" = "yes" ; then
3600 if test -z "$win_sdk"; then
3601 programfiles
="$PROGRAMFILES"
3602 test -n "$PROGRAMW6432" && programfiles
="$PROGRAMW6432"
3603 if test -n "$programfiles"; then
3604 win_sdk
=$
(ls -d "$programfiles/Microsoft SDKs/Windows/v"* |
tail -1) 2>/dev
/null
3606 feature_not_found
"Windows SDK"
3608 elif test "$win_sdk" = "no"; then
3613 ##########################################
3615 ##########################################
3616 # check if we have fdatasync
3622 #if defined(_POSIX_SYNCHRONIZED_IO) && _POSIX_SYNCHRONIZED_IO > 0
3623 return fdatasync(0);
3625 #error Not supported
3629 if compile_prog
"" "" ; then
3633 ##########################################
3634 # check if we have madvise
3638 #include <sys/types.h>
3639 #include <sys/mman.h>
3641 int main(void) { return madvise(NULL, 0, MADV_DONTNEED); }
3643 if compile_prog
"" "" ; then
3647 ##########################################
3648 # check if we have posix_madvise
3652 #include <sys/mman.h>
3654 int main(void) { return posix_madvise(NULL, 0, POSIX_MADV_DONTNEED); }
3656 if compile_prog
"" "" ; then
3660 ##########################################
3661 # check if we have usable SIGEV_THREAD_ID
3668 ev.sigev_notify = SIGEV_THREAD_ID;
3669 ev._sigev_un._tid = 0;
3670 asm volatile("" : : "g"(&ev));
3674 if compile_prog
"" "" ; then
3678 ##########################################
3679 # check if trace backend exists
3681 $python "$source_path/scripts/tracetool.py" "--backends=$trace_backends" --check-backends > /dev
/null
2> /dev
/null
3682 if test "$?" -ne 0 ; then
3683 error_exit
"invalid trace backends" \
3684 "Please choose supported trace backends."
3687 ##########################################
3688 # For 'ust' backend, test if ust headers are present
3689 if have_backend
"ust"; then
3691 #include <lttng/tracepoint.h>
3692 int main(void) { return 0; }
3694 if compile_prog
"" "" ; then
3695 if $pkg_config lttng-ust
--exists; then
3696 lttng_ust_libs
=`$pkg_config --libs lttng-ust`
3698 lttng_ust_libs
="-llttng-ust"
3700 if $pkg_config liburcu-bp
--exists; then
3701 urcu_bp_libs
=`$pkg_config --libs liburcu-bp`
3703 urcu_bp_libs
="-lurcu-bp"
3706 LIBS
="$lttng_ust_libs $urcu_bp_libs $LIBS"
3707 libs_qga
="$lttng_ust_libs $urcu_bp_libs $libs_qga"
3709 error_exit
"Trace backend 'ust' missing lttng-ust header files"
3713 ##########################################
3714 # For 'dtrace' backend, test if 'dtrace' command is present
3715 if have_backend
"dtrace"; then
3716 if ! has
'dtrace' ; then
3717 error_exit
"dtrace command is not found in PATH $PATH"
3719 trace_backend_stap
="no"
3720 if has
'stap' ; then
3721 trace_backend_stap
="yes"
3725 ##########################################
3726 # check and set a backend for coroutine
3728 # We prefer ucontext, but it's not always possible. The fallback
3729 # is sigcontext. gthread is not selectable except explicitly, because
3730 # it is not functional enough to run QEMU proper. (It is occasionally
3731 # useful for debugging purposes.) On Windows the only valid backend
3732 # is the Windows-specific one.
3735 if test "$darwin" != "yes"; then
3737 #include <ucontext.h>
3738 #ifdef __stub_makecontext
3739 #error Ignoring glibc stub makecontext which will always fail
3741 int main(void) { makecontext(0, 0, 0); return 0; }
3743 if compile_prog
"" "" ; then
3748 if test "$coroutine" = ""; then
3749 if test "$mingw32" = "yes"; then
3751 elif test "$ucontext_works" = "yes"; then
3754 coroutine
=sigaltstack
3759 if test "$mingw32" != "yes"; then
3760 error_exit
"'windows' coroutine backend only valid for Windows"
3762 # Unfortunately the user visible backend name doesn't match the
3763 # coroutine-*.c filename for this case, so we have to adjust it here.
3767 if test "$ucontext_works" != "yes"; then
3768 feature_not_found
"ucontext"
3771 gthread|sigaltstack
)
3772 if test "$mingw32" = "yes"; then
3773 error_exit
"only the 'windows' coroutine backend is valid for Windows"
3777 error_exit
"unknown coroutine backend $coroutine"
3782 if test "$coroutine_pool" = ""; then
3783 if test "$coroutine" = "gthread"; then
3789 if test "$coroutine" = "gthread" -a "$coroutine_pool" = "yes"; then
3790 error_exit
"'gthread' coroutine backend does not support pool (use --disable-coroutine-pool)"
3793 ##########################################
3794 # check if we have open_by_handle_at
3796 open_by_handle_at
=no
3799 #if !defined(AT_EMPTY_PATH)
3800 # error missing definition
3802 int main(void) { struct file_handle fh; return open_by_handle_at(0, &fh, 0); }
3805 if compile_prog
"" "" ; then
3806 open_by_handle_at
=yes
3809 ########################################
3810 # check if we have linux/magic.h
3814 #include <linux/magic.h>
3819 if compile_prog
"" "" ; then
3823 ########################################
3824 # check whether we can disable warning option with a pragma (this is needed
3825 # to silence warnings in the headers of some versions of external libraries).
3826 # This test has to be compiled with -Werror as otherwise an unknown pragma is
3829 # If we can't selectively disable warning in the code, disable -Werror so that
3830 # the build doesn't fail anyway.
3832 pragma_disable_unused_but_set
=no
3834 #pragma GCC diagnostic push
3835 #pragma GCC diagnostic ignored "-Wunused-but-set-variable"
3836 #pragma GCC diagnostic ignored "-Wstrict-prototypes"
3837 #pragma GCC diagnostic pop
3843 if compile_prog
"-Werror" "" ; then
3844 pragma_diagnostic_available
=yes
3849 ########################################
3850 # check if we have valgrind/valgrind.h and valgrind/memcheck.h
3854 #include <valgrind/valgrind.h>
3855 #include <valgrind/memcheck.h>
3860 if compile_prog
"" "" ; then
3864 ########################################
3865 # check if environ is declared
3875 if compile_prog
"" "" ; then
3879 ########################################
3880 # check if cpuid.h is usable.
3886 unsigned a, b, c, d;
3887 int max = __get_cpuid_max(0, 0);
3890 __cpuid(1, a, b, c, d);
3894 __cpuid_count(7, 0, a, b, c, d);
3900 if compile_prog
"" "" ; then
3904 ########################################
3905 # check if __[u]int128_t is usable.
3909 #if defined(__clang_major__) && defined(__clang_minor__)
3910 # if ((__clang_major__ < 3) || (__clang_major__ == 3) && (__clang_minor__ < 2))
3911 # error __int128_t does not work in CLANG before 3.2
3923 if compile_prog
"" "" ; then
3927 ########################################
3928 # check if getauxval is available.
3932 #include <sys/auxv.h>
3934 return getauxval(AT_HWCAP) == 0;
3937 if compile_prog
"" "" ; then
3941 ##########################################
3943 # After here, no more $cc or $ld runs
3945 if test "$gcov" = "yes" ; then
3946 CFLAGS
="-fprofile-arcs -ftest-coverage -g $CFLAGS"
3947 LDFLAGS
="-fprofile-arcs -ftest-coverage $LDFLAGS"
3948 elif test "$debug" = "no" ; then
3949 CFLAGS
="-O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 $CFLAGS"
3952 ##########################################
3954 if test "$libnfs" != "no" ; then
3955 if $pkg_config --atleast-version=1.9.3 libnfs
; then
3957 libnfs_libs
=$
($pkg_config --libs libnfs
)
3958 LIBS
="$LIBS $libnfs_libs"
3960 if test "$libnfs" = "yes" ; then
3961 feature_not_found
"libnfs"
3967 # Disable zero malloc errors for official releases unless explicitly told to
3969 if test -z "$zero_malloc" ; then
3970 if test "$z_version" = "50" ; then
3977 # Now we've finished running tests it's OK to add -Werror to the compiler flags
3978 if test "$werror" = "yes"; then
3979 QEMU_CFLAGS
="-Werror $QEMU_CFLAGS"
3982 if test "$solaris" = "no" ; then
3983 if $ld --version 2>/dev
/null |
grep "GNU ld" >/dev
/null
2>/dev
/null
; then
3984 LDFLAGS
="-Wl,--warn-common $LDFLAGS"
3988 # test if pod2man has --utf8 option
3989 if pod2man
--help |
grep -q utf8
; then
3990 POD2MAN
="pod2man --utf8"
3995 # Use ASLR, no-SEH and DEP if available
3996 if test "$mingw32" = "yes" ; then
3997 for flag
in --dynamicbase --no-seh --nxcompat; do
3998 if $ld --help 2>/dev
/null |
grep ".$flag" >/dev
/null
2>/dev
/null
; then
3999 LDFLAGS
="-Wl,$flag $LDFLAGS"
4004 qemu_confdir
=$sysconfdir$confsuffix
4005 qemu_moddir
=$libdir$confsuffix
4006 qemu_datadir
=$datadir$confsuffix
4007 qemu_localedir
="$datadir/locale"
4010 if test "$want_tools" = "yes" ; then
4011 tools
="qemu-img\$(EXESUF) qemu-io\$(EXESUF) $tools"
4012 if [ "$linux" = "yes" -o "$bsd" = "yes" -o "$solaris" = "yes" ] ; then
4013 tools
="qemu-nbd\$(EXESUF) $tools"
4016 if test "$softmmu" = yes ; then
4017 if test "$virtfs" != no
; then
4018 if test "$cap" = yes && test "$linux" = yes && test "$attr" = yes ; then
4020 tools
="$tools fsdev/virtfs-proxy-helper\$(EXESUF)"
4022 if test "$virtfs" = yes; then
4023 error_exit
"VirtFS is supported only on Linux and requires libcap-devel and libattr-devel"
4029 if [ "$guest_agent" != "no" ]; then
4030 if [ "$linux" = "yes" -o "$bsd" = "yes" -o "$solaris" = "yes" -o "$mingw32" = "yes" ] ; then
4031 tools
="qemu-ga\$(EXESUF) $tools"
4032 if [ "$mingw32" = "yes" -a "$guest_agent_with_vss" = "yes" ]; then
4033 tools
="qga/vss-win32/qga-vss.dll qga/vss-win32/qga-vss.tlb $tools"
4036 elif [ "$guest_agent" != yes ]; then
4039 error_exit
"Guest agent is not supported on this platform"
4043 # Mac OS X ships with a broken assembler
4045 if test \
( "$cpu" = "i386" -o "$cpu" = "x86_64" \
) -a \
4046 "$targetos" != "Darwin" -a "$targetos" != "SunOS" -a \
4047 "$softmmu" = yes ; then
4050 if test "$cpu" = "ppc64" -a "$targetos" != "Darwin" ; then
4051 roms
="$roms spapr-rtas"
4054 if test "$cpu" = "s390x" ; then
4055 roms
="$roms s390-ccw"
4058 # Probe for the need for relocating the user-only binary.
4059 if test "$pie" = "no" ; then
4062 arm | i386 | ppc
* | s390
* | sparc
* | x86_64 | x32
)
4063 # ??? Rationale for choosing this address
4064 textseg_addr
=0x60000000
4067 # A 256M aligned address, high in the address space, with enough
4068 # room for the code_gen_buffer above it before the stack.
4069 textseg_addr
=0x60000000
4072 if [ -n "$textseg_addr" ]; then
4074 int main(void) { return 0; }
4076 textseg_ldflags
="-Wl,-Ttext-segment=$textseg_addr"
4077 if ! compile_prog
"" "$textseg_ldflags"; then
4078 # In case ld does not support -Ttext-segment, edit the default linker
4079 # script via sed to set the .text start addr. This is needed on FreeBSD
4081 $ld --verbose |
sed \
4082 -e '1,/==================================================/d' \
4083 -e '/==================================================/,$d' \
4084 -e "s/[.] = [0-9a-fx]* [+] SIZEOF_HEADERS/. = $textseg_addr + SIZEOF_HEADERS/" \
4085 -e "s/__executable_start = [0-9a-fx]*/__executable_start = $textseg_addr/" > config-host.ld
4086 textseg_ldflags
="-Wl,-T../config-host.ld"
4091 # add pixman flags after all config tests are done
4092 QEMU_CFLAGS
="$QEMU_CFLAGS $pixman_cflags $fdt_cflags"
4093 libs_softmmu
="$libs_softmmu $pixman_libs"
4095 echo "Install prefix $prefix"
4096 echo "BIOS directory `eval echo $qemu_datadir`"
4097 echo "binary directory `eval echo $bindir`"
4098 echo "library directory `eval echo $libdir`"
4099 echo "module directory `eval echo $qemu_moddir`"
4100 echo "libexec directory `eval echo $libexecdir`"
4101 echo "include directory `eval echo $includedir`"
4102 echo "config directory `eval echo $sysconfdir`"
4103 if test "$mingw32" = "no" ; then
4104 echo "local state directory `eval echo $local_statedir`"
4105 echo "Manual directory `eval echo $mandir`"
4106 echo "ELF interp prefix $interp_prefix"
4108 echo "local state directory queried at runtime"
4109 echo "Windows SDK $win_sdk"
4111 echo "Source path $source_path"
4112 echo "C compiler $cc"
4113 echo "Host C compiler $host_cc"
4114 echo "C++ compiler $cxx"
4115 echo "Objective-C compiler $objcc"
4116 echo "ARFLAGS $ARFLAGS"
4117 echo "CFLAGS $CFLAGS"
4118 echo "QEMU_CFLAGS $QEMU_CFLAGS"
4119 echo "LDFLAGS $LDFLAGS"
4121 echo "install $install"
4122 echo "python $python"
4123 if test "$slirp" = "yes" ; then
4126 echo "module support $modules"
4127 echo "host CPU $cpu"
4128 echo "host big endian $bigendian"
4129 echo "target list $target_list"
4130 echo "tcg debug enabled $debug_tcg"
4131 echo "gprof enabled $gprof"
4132 echo "sparse enabled $sparse"
4133 echo "strip binaries $strip_opt"
4134 echo "profiler $profiler"
4135 echo "static build $static"
4136 if test "$darwin" = "yes" ; then
4137 echo "Cocoa support $cocoa"
4139 echo "pixman $pixman"
4140 echo "SDL support $sdl"
4141 echo "GTK support $gtk"
4142 echo "VTE support $vte"
4143 echo "curses support $curses"
4144 echo "curl support $curl"
4145 echo "mingw32 support $mingw32"
4146 echo "Audio drivers $audio_drv_list"
4147 echo "Block whitelist (rw) $block_drv_rw_whitelist"
4148 echo "Block whitelist (ro) $block_drv_ro_whitelist"
4149 echo "VirtFS support $virtfs"
4150 echo "VNC support $vnc"
4151 if test "$vnc" = "yes" ; then
4152 echo "VNC TLS support $vnc_tls"
4153 echo "VNC SASL support $vnc_sasl"
4154 echo "VNC JPEG support $vnc_jpeg"
4155 echo "VNC PNG support $vnc_png"
4156 echo "VNC WS support $vnc_ws"
4158 if test -n "$sparc_cpu"; then
4159 echo "Target Sparc Arch $sparc_cpu"
4161 echo "xen support $xen"
4162 echo "brlapi support $brlapi"
4163 echo "bluez support $bluez"
4164 echo "Documentation $docs"
4165 echo "GUEST_BASE $guest_base"
4167 echo "vde support $vde"
4168 echo "netmap support $netmap"
4169 echo "Linux AIO support $linux_aio"
4170 echo "ATTR/XATTR support $attr"
4171 echo "Install blobs $blobs"
4172 echo "KVM support $kvm"
4173 echo "RDMA support $rdma"
4174 echo "TCG interpreter $tcg_interpreter"
4175 echo "fdt support $fdt"
4176 echo "preadv support $preadv"
4177 echo "fdatasync $fdatasync"
4178 echo "madvise $madvise"
4179 echo "posix_madvise $posix_madvise"
4180 echo "sigev_thread_id $sigev_thread_id"
4181 echo "uuid support $uuid"
4182 echo "libcap-ng support $cap_ng"
4183 echo "vhost-net support $vhost_net"
4184 echo "vhost-scsi support $vhost_scsi"
4185 echo "Trace backends $trace_backends"
4186 if test "$trace_backend" = "simple"; then
4187 echo "Trace output file $trace_file-<pid>"
4189 if test "$spice" = "yes"; then
4190 echo "spice support $spice ($spice_protocol_version/$spice_server_version)"
4192 echo "spice support $spice"
4194 echo "rbd support $rbd"
4195 echo "xfsctl support $xfs"
4196 echo "nss used $smartcard_nss"
4197 echo "libusb $libusb"
4198 echo "usb net redir $usb_redir"
4199 echo "GLX support $glx"
4200 if test "$libiscsi_version" = "1.4.0"; then
4201 echo "libiscsi support $libiscsi (1.4.0)"
4203 echo "libiscsi support $libiscsi"
4205 echo "libnfs support $libnfs"
4206 echo "build guest agent $guest_agent"
4207 echo "QGA VSS support $guest_agent_with_vss"
4208 echo "seccomp support $seccomp"
4209 echo "coroutine backend $coroutine"
4210 echo "coroutine pool $coroutine_pool"
4211 echo "GlusterFS support $glusterfs"
4212 echo "virtio-blk-data-plane $virtio_blk_data_plane"
4213 echo "gcov $gcov_tool"
4214 echo "gcov enabled $gcov"
4215 echo "TPM support $tpm"
4216 echo "libssh2 support $libssh2"
4217 echo "TPM passthrough $tpm_passthrough"
4218 echo "QOM debugging $qom_cast_debug"
4220 echo "Quorum $quorum"
4221 echo "lzo support $lzo"
4222 echo "snappy support $snappy"
4224 if test "$sdl_too_old" = "yes"; then
4225 echo "-> Your SDL version is too old - please upgrade to have SDL support"
4228 config_host_mak
="config-host.mak"
4230 echo "# Automatically generated by configure - do not modify" >config-all-disas.mak
4232 echo "# Automatically generated by configure - do not modify" > $config_host_mak
4233 echo >> $config_host_mak
4235 echo all
: >> $config_host_mak
4236 echo "prefix=$prefix" >> $config_host_mak
4237 echo "bindir=$bindir" >> $config_host_mak
4238 echo "libdir=$libdir" >> $config_host_mak
4239 echo "libexecdir=$libexecdir" >> $config_host_mak
4240 echo "includedir=$includedir" >> $config_host_mak
4241 echo "mandir=$mandir" >> $config_host_mak
4242 echo "sysconfdir=$sysconfdir" >> $config_host_mak
4243 echo "qemu_confdir=$qemu_confdir" >> $config_host_mak
4244 echo "qemu_datadir=$qemu_datadir" >> $config_host_mak
4245 echo "qemu_docdir=$qemu_docdir" >> $config_host_mak
4246 echo "qemu_moddir=$qemu_moddir" >> $config_host_mak
4247 if test "$mingw32" = "no" ; then
4248 echo "qemu_localstatedir=$local_statedir" >> $config_host_mak
4250 echo "qemu_helperdir=$libexecdir" >> $config_host_mak
4251 echo "extra_cflags=$EXTRA_CFLAGS" >> $config_host_mak
4252 echo "extra_ldflags=$EXTRA_LDFLAGS" >> $config_host_mak
4253 echo "qemu_localedir=$qemu_localedir" >> $config_host_mak
4254 echo "libs_softmmu=$libs_softmmu" >> $config_host_mak
4256 echo "ARCH=$ARCH" >> $config_host_mak
4258 if test "$debug_tcg" = "yes" ; then
4259 echo "CONFIG_DEBUG_TCG=y" >> $config_host_mak
4261 if test "$strip_opt" = "yes" ; then
4262 echo "STRIP=${strip}" >> $config_host_mak
4264 if test "$bigendian" = "yes" ; then
4265 echo "HOST_WORDS_BIGENDIAN=y" >> $config_host_mak
4267 if test "$mingw32" = "yes" ; then
4268 echo "CONFIG_WIN32=y" >> $config_host_mak
4269 rc_version
=`cat $source_path/VERSION`
4270 version_major
=${rc_version%%.*}
4271 rc_version
=${rc_version#*.}
4272 version_minor
=${rc_version%%.*}
4273 rc_version
=${rc_version#*.}
4274 version_subminor
=${rc_version%%.*}
4276 echo "CONFIG_FILEVERSION=$version_major,$version_minor,$version_subminor,$version_micro" >> $config_host_mak
4277 echo "CONFIG_PRODUCTVERSION=$version_major,$version_minor,$version_subminor,$version_micro" >> $config_host_mak
4278 if test "$guest_agent_with_vss" = "yes" ; then
4279 echo "CONFIG_QGA_VSS=y" >> $config_host_mak
4280 echo "WIN_SDK=\"$win_sdk\"" >> $config_host_mak
4283 echo "CONFIG_POSIX=y" >> $config_host_mak
4286 if test "$linux" = "yes" ; then
4287 echo "CONFIG_LINUX=y" >> $config_host_mak
4290 if test "$darwin" = "yes" ; then
4291 echo "CONFIG_DARWIN=y" >> $config_host_mak
4294 if test "$aix" = "yes" ; then
4295 echo "CONFIG_AIX=y" >> $config_host_mak
4298 if test "$solaris" = "yes" ; then
4299 echo "CONFIG_SOLARIS=y" >> $config_host_mak
4300 echo "CONFIG_SOLARIS_VERSION=$solarisrev" >> $config_host_mak
4301 if test "$needs_libsunmath" = "yes" ; then
4302 echo "CONFIG_NEEDS_LIBSUNMATH=y" >> $config_host_mak
4305 if test "$haiku" = "yes" ; then
4306 echo "CONFIG_HAIKU=y" >> $config_host_mak
4308 if test "$static" = "yes" ; then
4309 echo "CONFIG_STATIC=y" >> $config_host_mak
4311 if test "$profiler" = "yes" ; then
4312 echo "CONFIG_PROFILER=y" >> $config_host_mak
4314 if test "$slirp" = "yes" ; then
4315 echo "CONFIG_SLIRP=y" >> $config_host_mak
4316 echo "CONFIG_SMBD_COMMAND=\"$smbd\"" >> $config_host_mak
4318 if test "$vde" = "yes" ; then
4319 echo "CONFIG_VDE=y" >> $config_host_mak
4321 if test "$netmap" = "yes" ; then
4322 echo "CONFIG_NETMAP=y" >> $config_host_mak
4324 if test "$cap_ng" = "yes" ; then
4325 echo "CONFIG_LIBCAP=y" >> $config_host_mak
4327 echo "CONFIG_AUDIO_DRIVERS=$audio_drv_list" >> $config_host_mak
4328 for drv
in $audio_drv_list; do
4329 def
=CONFIG_
`echo $drv | LC_ALL=C tr '[a-z]' '[A-Z]'`
4330 echo "$def=y" >> $config_host_mak
4331 if test "$drv" = "fmod"; then
4332 echo "FMOD_CFLAGS=-I$fmod_inc" >> $config_host_mak
4335 if test "$audio_pt_int" = "yes" ; then
4336 echo "CONFIG_AUDIO_PT_INT=y" >> $config_host_mak
4338 if test "$audio_win_int" = "yes" ; then
4339 echo "CONFIG_AUDIO_WIN_INT=y" >> $config_host_mak
4341 echo "CONFIG_BDRV_RW_WHITELIST=$block_drv_rw_whitelist" >> $config_host_mak
4342 echo "CONFIG_BDRV_RO_WHITELIST=$block_drv_ro_whitelist" >> $config_host_mak
4343 if test "$vnc" = "yes" ; then
4344 echo "CONFIG_VNC=y" >> $config_host_mak
4346 if test "$vnc_tls" = "yes" ; then
4347 echo "CONFIG_VNC_TLS=y" >> $config_host_mak
4349 if test "$vnc_sasl" = "yes" ; then
4350 echo "CONFIG_VNC_SASL=y" >> $config_host_mak
4352 if test "$vnc_jpeg" = "yes" ; then
4353 echo "CONFIG_VNC_JPEG=y" >> $config_host_mak
4355 if test "$vnc_png" = "yes" ; then
4356 echo "CONFIG_VNC_PNG=y" >> $config_host_mak
4358 if test "$vnc_ws" = "yes" ; then
4359 echo "CONFIG_VNC_WS=y" >> $config_host_mak
4360 echo "VNC_WS_CFLAGS=$vnc_ws_cflags" >> $config_host_mak
4362 if test "$fnmatch" = "yes" ; then
4363 echo "CONFIG_FNMATCH=y" >> $config_host_mak
4365 if test "$uuid" = "yes" ; then
4366 echo "CONFIG_UUID=y" >> $config_host_mak
4368 if test "$xfs" = "yes" ; then
4369 echo "CONFIG_XFS=y" >> $config_host_mak
4371 qemu_version
=`head $source_path/VERSION`
4372 echo "VERSION=$qemu_version" >>$config_host_mak
4373 echo "PKGVERSION=$pkgversion" >>$config_host_mak
4374 echo "SRC_PATH=$source_path" >> $config_host_mak
4375 echo "TARGET_DIRS=$target_list" >> $config_host_mak
4376 if [ "$docs" = "yes" ] ; then
4377 echo "BUILD_DOCS=yes" >> $config_host_mak
4379 if test "$modules" = "yes"; then
4380 # $shacmd can generate a hash started with digit, which the compiler doesn't
4381 # like as an symbol. So prefix it with an underscore
4382 echo "CONFIG_STAMP=_`(echo $qemu_version; echo $pkgversion; cat $0) | $shacmd - | cut -f1 -d\ `" >> $config_host_mak
4383 echo "CONFIG_MODULES=y" >> $config_host_mak
4385 if test "$sdl" = "yes" ; then
4386 echo "CONFIG_SDL=y" >> $config_host_mak
4387 echo "CONFIG_SDLABI=$sdlabi" >> $config_host_mak
4388 echo "SDL_CFLAGS=$sdl_cflags" >> $config_host_mak
4390 if test "$cocoa" = "yes" ; then
4391 echo "CONFIG_COCOA=y" >> $config_host_mak
4393 if test "$curses" = "yes" ; then
4394 echo "CONFIG_CURSES=y" >> $config_host_mak
4396 if test "$utimens" = "yes" ; then
4397 echo "CONFIG_UTIMENSAT=y" >> $config_host_mak
4399 if test "$pipe2" = "yes" ; then
4400 echo "CONFIG_PIPE2=y" >> $config_host_mak
4402 if test "$accept4" = "yes" ; then
4403 echo "CONFIG_ACCEPT4=y" >> $config_host_mak
4405 if test "$splice" = "yes" ; then
4406 echo "CONFIG_SPLICE=y" >> $config_host_mak
4408 if test "$eventfd" = "yes" ; then
4409 echo "CONFIG_EVENTFD=y" >> $config_host_mak
4411 if test "$fallocate" = "yes" ; then
4412 echo "CONFIG_FALLOCATE=y" >> $config_host_mak
4414 if test "$fallocate_punch_hole" = "yes" ; then
4415 echo "CONFIG_FALLOCATE_PUNCH_HOLE=y" >> $config_host_mak
4417 if test "$sync_file_range" = "yes" ; then
4418 echo "CONFIG_SYNC_FILE_RANGE=y" >> $config_host_mak
4420 if test "$fiemap" = "yes" ; then
4421 echo "CONFIG_FIEMAP=y" >> $config_host_mak
4423 if test "$dup3" = "yes" ; then
4424 echo "CONFIG_DUP3=y" >> $config_host_mak
4426 if test "$ppoll" = "yes" ; then
4427 echo "CONFIG_PPOLL=y" >> $config_host_mak
4429 if test "$prctl_pr_set_timerslack" = "yes" ; then
4430 echo "CONFIG_PRCTL_PR_SET_TIMERSLACK=y" >> $config_host_mak
4432 if test "$epoll" = "yes" ; then
4433 echo "CONFIG_EPOLL=y" >> $config_host_mak
4435 if test "$epoll_create1" = "yes" ; then
4436 echo "CONFIG_EPOLL_CREATE1=y" >> $config_host_mak
4438 if test "$epoll_pwait" = "yes" ; then
4439 echo "CONFIG_EPOLL_PWAIT=y" >> $config_host_mak
4441 if test "$sendfile" = "yes" ; then
4442 echo "CONFIG_SENDFILE=y" >> $config_host_mak
4444 if test "$inotify" = "yes" ; then
4445 echo "CONFIG_INOTIFY=y" >> $config_host_mak
4447 if test "$inotify1" = "yes" ; then
4448 echo "CONFIG_INOTIFY1=y" >> $config_host_mak
4450 if test "$byteswap_h" = "yes" ; then
4451 echo "CONFIG_BYTESWAP_H=y" >> $config_host_mak
4453 if test "$bswap_h" = "yes" ; then
4454 echo "CONFIG_MACHINE_BSWAP_H=y" >> $config_host_mak
4456 if test "$curl" = "yes" ; then
4457 echo "CONFIG_CURL=m" >> $config_host_mak
4458 echo "CURL_CFLAGS=$curl_cflags" >> $config_host_mak
4459 echo "CURL_LIBS=$curl_libs" >> $config_host_mak
4461 if test "$brlapi" = "yes" ; then
4462 echo "CONFIG_BRLAPI=y" >> $config_host_mak
4464 if test "$bluez" = "yes" ; then
4465 echo "CONFIG_BLUEZ=y" >> $config_host_mak
4466 echo "BLUEZ_CFLAGS=$bluez_cflags" >> $config_host_mak
4468 echo "GLIB_CFLAGS=$glib_cflags" >> $config_host_mak
4469 if test "$gtk" = "yes" ; then
4470 echo "CONFIG_GTK=y" >> $config_host_mak
4471 echo "CONFIG_GTKABI=$gtkabi" >> $config_host_mak
4472 echo "GTK_CFLAGS=$gtk_cflags" >> $config_host_mak
4474 if test "$vte" = "yes" ; then
4475 echo "CONFIG_VTE=y" >> $config_host_mak
4476 echo "VTE_CFLAGS=$vte_cflags" >> $config_host_mak
4478 if test "$xen" = "yes" ; then
4479 echo "CONFIG_XEN_BACKEND=y" >> $config_host_mak
4480 echo "CONFIG_XEN_CTRL_INTERFACE_VERSION=$xen_ctrl_version" >> $config_host_mak
4482 if test "$linux_aio" = "yes" ; then
4483 echo "CONFIG_LINUX_AIO=y" >> $config_host_mak
4485 if test "$attr" = "yes" ; then
4486 echo "CONFIG_ATTR=y" >> $config_host_mak
4488 if test "$libattr" = "yes" ; then
4489 echo "CONFIG_LIBATTR=y" >> $config_host_mak
4491 if test "$virtfs" = "yes" ; then
4492 echo "CONFIG_VIRTFS=y" >> $config_host_mak
4494 if test "$vhost_scsi" = "yes" ; then
4495 echo "CONFIG_VHOST_SCSI=y" >> $config_host_mak
4497 if test "$blobs" = "yes" ; then
4498 echo "INSTALL_BLOBS=yes" >> $config_host_mak
4500 if test "$iovec" = "yes" ; then
4501 echo "CONFIG_IOVEC=y" >> $config_host_mak
4503 if test "$preadv" = "yes" ; then
4504 echo "CONFIG_PREADV=y" >> $config_host_mak
4506 if test "$fdt" = "yes" ; then
4507 echo "CONFIG_FDT=y" >> $config_host_mak
4509 if test "$signalfd" = "yes" ; then
4510 echo "CONFIG_SIGNALFD=y" >> $config_host_mak
4512 if test "$tcg_interpreter" = "yes" ; then
4513 echo "CONFIG_TCG_INTERPRETER=y" >> $config_host_mak
4515 if test "$fdatasync" = "yes" ; then
4516 echo "CONFIG_FDATASYNC=y" >> $config_host_mak
4518 if test "$madvise" = "yes" ; then
4519 echo "CONFIG_MADVISE=y" >> $config_host_mak
4521 if test "$posix_madvise" = "yes" ; then
4522 echo "CONFIG_POSIX_MADVISE=y" >> $config_host_mak
4524 if test "$sigev_thread_id" = "yes" ; then
4525 echo "CONFIG_SIGEV_THREAD_ID=y" >> $config_host_mak
4528 if test "$spice" = "yes" ; then
4529 echo "CONFIG_SPICE=y" >> $config_host_mak
4532 if test "$smartcard_nss" = "yes" ; then
4533 echo "CONFIG_SMARTCARD_NSS=y" >> $config_host_mak
4534 echo "NSS_LIBS=$nss_libs" >> $config_host_mak
4535 echo "NSS_CFLAGS=$nss_cflags" >> $config_host_mak
4538 if test "$libusb" = "yes" ; then
4539 echo "CONFIG_USB_LIBUSB=y" >> $config_host_mak
4542 if test "$usb_redir" = "yes" ; then
4543 echo "CONFIG_USB_REDIR=y" >> $config_host_mak
4546 if test "$glx" = "yes" ; then
4547 echo "CONFIG_GLX=y" >> $config_host_mak
4548 echo "GLX_LIBS=$glx_libs" >> $config_host_mak
4551 if test "$lzo" = "yes" ; then
4552 echo "CONFIG_LZO=y" >> $config_host_mak
4555 if test "$snappy" = "yes" ; then
4556 echo "CONFIG_SNAPPY=y" >> $config_host_mak
4559 if test "$libiscsi" = "yes" ; then
4560 echo "CONFIG_LIBISCSI=m" >> $config_host_mak
4561 if test "$libiscsi_version" = "1.4.0"; then
4562 echo "CONFIG_LIBISCSI_1_4=y" >> $config_host_mak
4564 echo "LIBISCSI_CFLAGS=$libiscsi_cflags" >> $config_host_mak
4565 echo "LIBISCSI_LIBS=$libiscsi_libs" >> $config_host_mak
4568 if test "$libnfs" = "yes" ; then
4569 echo "CONFIG_LIBNFS=y" >> $config_host_mak
4572 if test "$seccomp" = "yes"; then
4573 echo "CONFIG_SECCOMP=y" >> $config_host_mak
4576 # XXX: suppress that
4577 if [ "$bsd" = "yes" ] ; then
4578 echo "CONFIG_BSD=y" >> $config_host_mak
4581 if test "$zero_malloc" = "yes" ; then
4582 echo "CONFIG_ZERO_MALLOC=y" >> $config_host_mak
4584 if test "$qom_cast_debug" = "yes" ; then
4585 echo "CONFIG_QOM_CAST_DEBUG=y" >> $config_host_mak
4587 if test "$rbd" = "yes" ; then
4588 echo "CONFIG_RBD=m" >> $config_host_mak
4589 echo "RBD_CFLAGS=$rbd_cflags" >> $config_host_mak
4590 echo "RBD_LIBS=$rbd_libs" >> $config_host_mak
4593 echo "CONFIG_COROUTINE_BACKEND=$coroutine" >> $config_host_mak
4594 if test "$coroutine_pool" = "yes" ; then
4595 echo "CONFIG_COROUTINE_POOL=1" >> $config_host_mak
4597 echo "CONFIG_COROUTINE_POOL=0" >> $config_host_mak
4600 if test "$open_by_handle_at" = "yes" ; then
4601 echo "CONFIG_OPEN_BY_HANDLE=y" >> $config_host_mak
4604 if test "$linux_magic_h" = "yes" ; then
4605 echo "CONFIG_LINUX_MAGIC_H=y" >> $config_host_mak
4608 if test "$pragma_diagnostic_available" = "yes" ; then
4609 echo "CONFIG_PRAGMA_DIAGNOSTIC_AVAILABLE=y" >> $config_host_mak
4612 if test "$valgrind_h" = "yes" ; then
4613 echo "CONFIG_VALGRIND_H=y" >> $config_host_mak
4616 if test "$has_environ" = "yes" ; then
4617 echo "CONFIG_HAS_ENVIRON=y" >> $config_host_mak
4620 if test "$cpuid_h" = "yes" ; then
4621 echo "CONFIG_CPUID_H=y" >> $config_host_mak
4624 if test "$int128" = "yes" ; then
4625 echo "CONFIG_INT128=y" >> $config_host_mak
4628 if test "$getauxval" = "yes" ; then
4629 echo "CONFIG_GETAUXVAL=y" >> $config_host_mak
4632 if test "$glusterfs" = "yes" ; then
4633 echo "CONFIG_GLUSTERFS=m" >> $config_host_mak
4634 echo "GLUSTERFS_CFLAGS=$glusterfs_cflags" >> $config_host_mak
4635 echo "GLUSTERFS_LIBS=$glusterfs_libs" >> $config_host_mak
4638 if test "$glusterfs_discard" = "yes" ; then
4639 echo "CONFIG_GLUSTERFS_DISCARD=y" >> $config_host_mak
4642 if test "$glusterfs_zerofill" = "yes" ; then
4643 echo "CONFIG_GLUSTERFS_ZEROFILL=y" >> $config_host_mak
4646 if test "$libssh2" = "yes" ; then
4647 echo "CONFIG_LIBSSH2=m" >> $config_host_mak
4648 echo "LIBSSH2_CFLAGS=$libssh2_cflags" >> $config_host_mak
4649 echo "LIBSSH2_LIBS=$libssh2_libs" >> $config_host_mak
4652 if test "$quorum" = "yes" ; then
4653 echo "CONFIG_QUORUM=y" >> $config_host_mak
4656 if test "$virtio_blk_data_plane" = "yes" ; then
4657 echo 'CONFIG_VIRTIO_BLK_DATA_PLANE=$(CONFIG_VIRTIO)' >> $config_host_mak
4660 if test "$vhdx" = "yes" ; then
4661 echo "CONFIG_VHDX=y" >> $config_host_mak
4665 if test "$libusb" = "yes"; then
4666 echo "HOST_USB=libusb legacy" >> $config_host_mak
4668 echo "HOST_USB=stub" >> $config_host_mak
4671 # TPM passthrough support?
4672 if test "$tpm" = "yes"; then
4673 echo 'CONFIG_TPM=$(CONFIG_SOFTMMU)' >> $config_host_mak
4674 if test "$tpm_passthrough" = "yes"; then
4675 echo "CONFIG_TPM_PASSTHROUGH=y" >> $config_host_mak
4679 echo "TRACE_BACKENDS=$trace_backends" >> $config_host_mak
4680 if have_backend
"nop"; then
4681 echo "CONFIG_TRACE_NOP=y" >> $config_host_mak
4683 if have_backend
"simple"; then
4684 echo "CONFIG_TRACE_SIMPLE=y" >> $config_host_mak
4685 # Set the appropriate trace file.
4686 trace_file
="\"$trace_file-\" FMT_pid"
4688 if have_backend
"stderr"; then
4689 echo "CONFIG_TRACE_STDERR=y" >> $config_host_mak
4691 if have_backend
"ust"; then
4692 echo "CONFIG_TRACE_UST=y" >> $config_host_mak
4694 if have_backend
"dtrace"; then
4695 echo "CONFIG_TRACE_DTRACE=y" >> $config_host_mak
4696 if test "$trace_backend_stap" = "yes" ; then
4697 echo "CONFIG_TRACE_SYSTEMTAP=y" >> $config_host_mak
4700 if have_backend
"ftrace"; then
4701 if test "$linux" = "yes" ; then
4702 echo "CONFIG_TRACE_FTRACE=y" >> $config_host_mak
4704 feature_not_found
"ftrace(trace backend)" "ftrace requires Linux"
4707 echo "CONFIG_TRACE_FILE=$trace_file" >> $config_host_mak
4709 if test "$rdma" = "yes" ; then
4710 echo "CONFIG_RDMA=y" >> $config_host_mak
4713 # Hold two types of flag:
4714 # CONFIG_THREAD_SETNAME_BYTHREAD - we've got a way of setting the name on
4715 # a thread we have a handle to
4716 # CONFIG_PTHREAD_SETNAME_NP - A way of doing it on a particular
4718 if test "$pthread_setname_np" = "yes" ; then
4719 echo "CONFIG_THREAD_SETNAME_BYTHREAD=y" >> $config_host_mak
4720 echo "CONFIG_PTHREAD_SETNAME_NP=y" >> $config_host_mak
4723 if test "$tcg_interpreter" = "yes"; then
4724 QEMU_INCLUDES
="-I\$(SRC_PATH)/tcg/tci $QEMU_INCLUDES"
4725 elif test "$ARCH" = "sparc64" ; then
4726 QEMU_INCLUDES
="-I\$(SRC_PATH)/tcg/sparc $QEMU_INCLUDES"
4727 elif test "$ARCH" = "s390x" ; then
4728 QEMU_INCLUDES
="-I\$(SRC_PATH)/tcg/s390 $QEMU_INCLUDES"
4729 elif test "$ARCH" = "x86_64" -o "$ARCH" = "x32" ; then
4730 QEMU_INCLUDES
="-I\$(SRC_PATH)/tcg/i386 $QEMU_INCLUDES"
4732 QEMU_INCLUDES
="-I\$(SRC_PATH)/tcg/\$(ARCH) $QEMU_INCLUDES"
4734 QEMU_INCLUDES
="-I\$(SRC_PATH)/tcg $QEMU_INCLUDES"
4736 echo "TOOLS=$tools" >> $config_host_mak
4737 echo "ROMS=$roms" >> $config_host_mak
4738 echo "MAKE=$make" >> $config_host_mak
4739 echo "INSTALL=$install" >> $config_host_mak
4740 echo "INSTALL_DIR=$install -d -m 0755" >> $config_host_mak
4741 echo "INSTALL_DATA=$install -c -m 0644" >> $config_host_mak
4742 if test -n "$libtool"; then
4743 echo "INSTALL_PROG=\$(LIBTOOL) --mode=install $install -c -m 0755" >> $config_host_mak
4744 echo "INSTALL_LIB=\$(LIBTOOL) --mode=install $install -c -m 0644" >> $config_host_mak
4746 echo "INSTALL_PROG=$install -c -m 0755" >> $config_host_mak
4747 echo "INSTALL_LIB=$install -c -m 0644" >> $config_host_mak
4749 echo "PYTHON=$python" >> $config_host_mak
4750 echo "CC=$cc" >> $config_host_mak
4751 if $iasl -h > /dev
/null
2>&1; then
4752 echo "IASL=$iasl" >> $config_host_mak
4754 echo "CC_I386=$cc_i386" >> $config_host_mak
4755 echo "HOST_CC=$host_cc" >> $config_host_mak
4756 echo "CXX=$cxx" >> $config_host_mak
4757 echo "OBJCC=$objcc" >> $config_host_mak
4758 echo "AR=$ar" >> $config_host_mak
4759 echo "ARFLAGS=$ARFLAGS" >> $config_host_mak
4760 echo "AS=$as" >> $config_host_mak
4761 echo "CPP=$cpp" >> $config_host_mak
4762 echo "OBJCOPY=$objcopy" >> $config_host_mak
4763 echo "LD=$ld" >> $config_host_mak
4764 echo "WINDRES=$windres" >> $config_host_mak
4765 echo "LIBTOOL=$libtool" >> $config_host_mak
4766 echo "CFLAGS=$CFLAGS" >> $config_host_mak
4767 echo "CFLAGS_NOPIE=$CFLAGS_NOPIE" >> $config_host_mak
4768 echo "QEMU_CFLAGS=$QEMU_CFLAGS" >> $config_host_mak
4769 echo "QEMU_INCLUDES=$QEMU_INCLUDES" >> $config_host_mak
4770 if test "$sparse" = "yes" ; then
4771 echo "CC := REAL_CC=\"\$(CC)\" cgcc" >> $config_host_mak
4772 echo "HOST_CC := REAL_CC=\"\$(HOST_CC)\" cgcc" >> $config_host_mak
4773 echo "QEMU_CFLAGS += -Wbitwise -Wno-transparent-union -Wno-old-initializer -Wno-non-pointer-null" >> $config_host_mak
4775 if test "$cross_prefix" != ""; then
4776 echo "AUTOCONF_HOST := --host=${cross_prefix%-}" >> $config_host_mak
4778 echo "AUTOCONF_HOST := " >> $config_host_mak
4780 echo "LDFLAGS=$LDFLAGS" >> $config_host_mak
4781 echo "LDFLAGS_NOPIE=$LDFLAGS_NOPIE" >> $config_host_mak
4782 echo "LIBTOOLFLAGS=$LIBTOOLFLAGS" >> $config_host_mak
4783 echo "LIBS+=$LIBS" >> $config_host_mak
4784 echo "LIBS_TOOLS+=$libs_tools" >> $config_host_mak
4785 echo "EXESUF=$EXESUF" >> $config_host_mak
4786 echo "DSOSUF=$DSOSUF" >> $config_host_mak
4787 echo "LDFLAGS_SHARED=$LDFLAGS_SHARED" >> $config_host_mak
4788 echo "LIBS_QGA+=$libs_qga" >> $config_host_mak
4789 echo "POD2MAN=$POD2MAN" >> $config_host_mak
4790 echo "TRANSLATE_OPT_CFLAGS=$TRANSLATE_OPT_CFLAGS" >> $config_host_mak
4791 if test "$gcov" = "yes" ; then
4792 echo "CONFIG_GCOV=y" >> $config_host_mak
4793 echo "GCOV=$gcov_tool" >> $config_host_mak
4796 # use included Linux headers
4797 if test "$linux" = "yes" ; then
4798 mkdir
-p linux-headers
4813 # For most CPUs the kernel architecture name and QEMU CPU name match.
4817 # For non-KVM architectures we will not have asm headers
4818 if [ -e "$source_path/linux-headers/asm-$linux_arch" ]; then
4819 symlink
"$source_path/linux-headers/asm-$linux_arch" linux-headers
/asm
4823 for target
in $target_list; do
4824 target_dir
="$target"
4825 config_target_mak
=$target_dir/config-target.mak
4826 target_name
=`echo $target | cut -d '-' -f 1`
4827 target_bigendian
="no"
4829 case "$target_name" in
4830 armeb|lm32|m68k|microblaze|mips|mipsn32|mips64|moxie|or32|ppc|ppcemb|ppc64|ppc64abi32|s390x|sh4eb|sparc|sparc64|sparc32plus|xtensaeb
)
4831 target_bigendian
=yes
4835 target_user_only
="no"
4836 target_linux_user
="no"
4837 target_bsd_user
="no"
4839 ${target_name}-softmmu)
4840 target_softmmu
="yes"
4842 ${target_name}-linux-user)
4843 if test "$linux" != "yes" ; then
4844 error_exit
"Target '$target' is only available on a Linux host"
4846 target_user_only
="yes"
4847 target_linux_user
="yes"
4849 ${target_name}-bsd-user)
4850 if test "$bsd" != "yes" ; then
4851 error_exit
"Target '$target' is only available on a BSD host"
4853 target_user_only
="yes"
4854 target_bsd_user
="yes"
4857 error_exit
"Target '$target' not recognised"
4862 mkdir
-p $target_dir
4863 echo "# Automatically generated by configure - do not modify" > $config_target_mak
4866 interp_prefix1
=`echo "$interp_prefix" | sed "s/%M/$target_name/g"`
4869 TARGET_ARCH
="$target_name"
4873 case "$target_name" in
4877 TARGET_BASE_ARCH
=i386
4884 gdb_xml_files
="arm-core.xml arm-vfp.xml arm-vfp3.xml arm-neon.xml"
4887 TARGET_BASE_ARCH
=arm
4889 gdb_xml_files
="aarch64-core.xml aarch64-fpu.xml"
4897 gdb_xml_files
="cf-core.xml cf-fp.xml"
4899 microblaze|microblazeel
)
4900 TARGET_ARCH
=microblaze
4905 echo "TARGET_ABI_MIPSO32=y" >> $config_target_mak
4909 TARGET_BASE_ARCH
=mips
4910 echo "TARGET_ABI_MIPSN32=y" >> $config_target_mak
4911 echo "TARGET_ABI32=y" >> $config_target_mak
4915 TARGET_BASE_ARCH
=mips
4916 echo "TARGET_ABI_MIPSN64=y" >> $config_target_mak
4921 TARGET_ARCH
=openrisc
4922 TARGET_BASE_ARCH
=openrisc
4925 gdb_xml_files
="power-core.xml power-fpu.xml power-altivec.xml power-spe.xml"
4928 TARGET_BASE_ARCH
=ppc
4930 gdb_xml_files
="power-core.xml power-fpu.xml power-altivec.xml power-spe.xml"
4933 TARGET_BASE_ARCH
=ppc
4935 gdb_xml_files
="power64-core.xml power-fpu.xml power-altivec.xml power-spe.xml"
4939 TARGET_BASE_ARCH
=ppc
4941 echo "TARGET_ABI32=y" >> $config_target_mak
4942 gdb_xml_files
="power64-core.xml power-fpu.xml power-altivec.xml power-spe.xml"
4951 TARGET_BASE_ARCH
=sparc
4955 TARGET_BASE_ARCH
=sparc
4956 TARGET_ABI_DIR
=sparc
4957 echo "TARGET_ABI32=y" >> $config_target_mak
4967 error_exit
"Unsupported target CPU"
4970 # TARGET_BASE_ARCH needs to be defined after TARGET_ARCH
4971 if [ "$TARGET_BASE_ARCH" = "" ]; then
4972 TARGET_BASE_ARCH
=$TARGET_ARCH
4975 symlink
"$source_path/Makefile.target" "$target_dir/Makefile"
4978 echo "$@"| LC_ALL
=C
tr '[a-z]' '[A-Z]'
4981 target_arch_name
="`upper $TARGET_ARCH`"
4982 echo "TARGET_$target_arch_name=y" >> $config_target_mak
4983 echo "TARGET_NAME=$target_name" >> $config_target_mak
4984 echo "TARGET_BASE_ARCH=$TARGET_BASE_ARCH" >> $config_target_mak
4985 if [ "$TARGET_ABI_DIR" = "" ]; then
4986 TARGET_ABI_DIR
=$TARGET_ARCH
4988 echo "TARGET_ABI_DIR=$TARGET_ABI_DIR" >> $config_target_mak
4989 case "$target_name" in
4991 if test "$xen" = "yes" -a "$target_softmmu" = "yes" ; then
4992 echo "CONFIG_XEN=y" >> $config_target_mak
4993 if test "$xen_pci_passthrough" = yes; then
4994 echo "CONFIG_XEN_PCI_PASSTHROUGH=y" >> "$config_target_mak"
5000 case "$target_name" in
5001 aarch64|arm|i386|x86_64|ppcemb|ppc|ppc64|s390x
)
5002 # Make sure the target and host cpus are compatible
5003 if test "$kvm" = "yes" -a "$target_softmmu" = "yes" -a \
5004 \
( "$target_name" = "$cpu" -o \
5005 \
( "$target_name" = "ppcemb" -a "$cpu" = "ppc" \
) -o \
5006 \
( "$target_name" = "ppc64" -a "$cpu" = "ppc" \
) -o \
5007 \
( "$target_name" = "ppc" -a "$cpu" = "ppc64" \
) -o \
5008 \
( "$target_name" = "ppcemb" -a "$cpu" = "ppc64" \
) -o \
5009 \
( "$target_name" = "x86_64" -a "$cpu" = "i386" \
) -o \
5010 \
( "$target_name" = "i386" -a "$cpu" = "x86_64" \
) \
) ; then
5011 echo "CONFIG_KVM=y" >> $config_target_mak
5012 if test "$vhost_net" = "yes" ; then
5013 echo "CONFIG_VHOST_NET=y" >> $config_target_mak
5017 if test "$target_bigendian" = "yes" ; then
5018 echo "TARGET_WORDS_BIGENDIAN=y" >> $config_target_mak
5020 if test "$target_softmmu" = "yes" ; then
5021 echo "CONFIG_SOFTMMU=y" >> $config_target_mak
5023 if test "$target_user_only" = "yes" ; then
5024 echo "CONFIG_USER_ONLY=y" >> $config_target_mak
5025 echo "CONFIG_QEMU_INTERP_PREFIX=\"$interp_prefix1\"" >> $config_target_mak
5027 if test "$target_linux_user" = "yes" ; then
5028 echo "CONFIG_LINUX_USER=y" >> $config_target_mak
5031 if test ! -z "$gdb_xml_files" ; then
5032 for x
in $gdb_xml_files; do
5033 list
="$list $source_path/gdb-xml/$x"
5035 echo "TARGET_XML_FILES=$list" >> $config_target_mak
5038 if test "$target_user_only" = "yes" -a "$bflt" = "yes"; then
5039 echo "TARGET_HAS_BFLT=y" >> $config_target_mak
5041 if test "$target_user_only" = "yes" -a "$guest_base" = "yes"; then
5042 echo "CONFIG_USE_GUEST_BASE=y" >> $config_target_mak
5044 if test "$target_bsd_user" = "yes" ; then
5045 echo "CONFIG_BSD_USER=y" >> $config_target_mak
5048 # generate QEMU_CFLAGS/LDFLAGS for targets
5053 for i
in $ARCH $TARGET_BASE_ARCH ; do
5056 echo "CONFIG_ALPHA_DIS=y" >> $config_target_mak
5057 echo "CONFIG_ALPHA_DIS=y" >> config-all-disas.mak
5060 if test -n "${cxx}"; then
5061 echo "CONFIG_ARM_A64_DIS=y" >> $config_target_mak
5062 echo "CONFIG_ARM_A64_DIS=y" >> config-all-disas.mak
5066 echo "CONFIG_ARM_DIS=y" >> $config_target_mak
5067 echo "CONFIG_ARM_DIS=y" >> config-all-disas.mak
5068 if test -n "${cxx}"; then
5069 echo "CONFIG_ARM_A64_DIS=y" >> $config_target_mak
5070 echo "CONFIG_ARM_A64_DIS=y" >> config-all-disas.mak
5074 echo "CONFIG_CRIS_DIS=y" >> $config_target_mak
5075 echo "CONFIG_CRIS_DIS=y" >> config-all-disas.mak
5078 echo "CONFIG_HPPA_DIS=y" >> $config_target_mak
5079 echo "CONFIG_HPPA_DIS=y" >> config-all-disas.mak
5082 echo "CONFIG_I386_DIS=y" >> $config_target_mak
5083 echo "CONFIG_I386_DIS=y" >> config-all-disas.mak
5086 echo "CONFIG_IA64_DIS=y" >> $config_target_mak
5087 echo "CONFIG_IA64_DIS=y" >> config-all-disas.mak
5090 echo "CONFIG_LM32_DIS=y" >> $config_target_mak
5091 echo "CONFIG_LM32_DIS=y" >> config-all-disas.mak
5094 echo "CONFIG_M68K_DIS=y" >> $config_target_mak
5095 echo "CONFIG_M68K_DIS=y" >> config-all-disas.mak
5098 echo "CONFIG_MICROBLAZE_DIS=y" >> $config_target_mak
5099 echo "CONFIG_MICROBLAZE_DIS=y" >> config-all-disas.mak
5102 echo "CONFIG_MIPS_DIS=y" >> $config_target_mak
5103 echo "CONFIG_MIPS_DIS=y" >> config-all-disas.mak
5106 echo "CONFIG_MOXIE_DIS=y" >> $config_target_mak
5107 echo "CONFIG_MOXIE_DIS=y" >> config-all-disas.mak
5110 echo "CONFIG_OPENRISC_DIS=y" >> $config_target_mak
5111 echo "CONFIG_OPENRISC_DIS=y" >> config-all-disas.mak
5114 echo "CONFIG_PPC_DIS=y" >> $config_target_mak
5115 echo "CONFIG_PPC_DIS=y" >> config-all-disas.mak
5118 echo "CONFIG_S390_DIS=y" >> $config_target_mak
5119 echo "CONFIG_S390_DIS=y" >> config-all-disas.mak
5122 echo "CONFIG_SH4_DIS=y" >> $config_target_mak
5123 echo "CONFIG_SH4_DIS=y" >> config-all-disas.mak
5126 echo "CONFIG_SPARC_DIS=y" >> $config_target_mak
5127 echo "CONFIG_SPARC_DIS=y" >> config-all-disas.mak
5130 echo "CONFIG_XTENSA_DIS=y" >> $config_target_mak
5131 echo "CONFIG_XTENSA_DIS=y" >> config-all-disas.mak
5135 if test "$tcg_interpreter" = "yes" ; then
5136 echo "CONFIG_TCI_DIS=y" >> $config_target_mak
5137 echo "CONFIG_TCI_DIS=y" >> config-all-disas.mak
5142 # Ensure there's only a single GP
5143 cflags
="-msmall-data $cflags"
5147 if test "$gprof" = "yes" ; then
5148 echo "TARGET_GPROF=yes" >> $config_target_mak
5149 if test "$target_linux_user" = "yes" ; then
5151 ldflags
="-p $ldflags"
5153 if test "$target_softmmu" = "yes" ; then
5154 ldflags
="-p $ldflags"
5155 echo "GPROF_CFLAGS=-p" >> $config_target_mak
5159 if test "$target_linux_user" = "yes" -o "$target_bsd_user" = "yes" ; then
5160 ldflags
="$ldflags $textseg_ldflags"
5163 echo "LDFLAGS+=$ldflags" >> $config_target_mak
5164 echo "QEMU_CFLAGS+=$cflags" >> $config_target_mak
5166 done # for target in $targets
5168 if [ "$pixman" = "internal" ]; then
5169 echo "config-host.h: subdir-pixman" >> $config_host_mak
5172 if test "$rdma" = "yes" ; then
5173 echo "CONFIG_RDMA=y" >> $config_host_mak
5176 if [ "$dtc_internal" = "yes" ]; then
5177 echo "config-host.h: subdir-dtc" >> $config_host_mak
5180 # build tree in object directory in case the source is not in the current directory
5181 DIRS
="tests tests/tcg tests/tcg/cris tests/tcg/lm32 tests/libqos tests/qapi-schema tests/tcg/xtensa tests/qemu-iotests"
5183 DIRS
="$DIRS pc-bios/optionrom pc-bios/spapr-rtas pc-bios/s390-ccw"
5184 DIRS
="$DIRS roms/seabios roms/vgabios"
5185 DIRS
="$DIRS qapi-generated"
5186 FILES
="Makefile tests/tcg/Makefile qdict-test-data.txt"
5187 FILES
="$FILES tests/tcg/cris/Makefile tests/tcg/cris/.gdbinit"
5188 FILES
="$FILES tests/tcg/lm32/Makefile tests/tcg/xtensa/Makefile po/Makefile"
5189 FILES
="$FILES pc-bios/optionrom/Makefile pc-bios/keymaps"
5190 FILES
="$FILES pc-bios/spapr-rtas/Makefile"
5191 FILES
="$FILES pc-bios/s390-ccw/Makefile"
5192 FILES
="$FILES roms/seabios/Makefile roms/vgabios/Makefile"
5193 FILES
="$FILES pc-bios/qemu-icon.bmp"
5195 $source_path/pc-bios
/*.bin \
5196 $source_path/pc-bios
/*.aml \
5197 $source_path/pc-bios
/*.rom \
5198 $source_path/pc-bios
/*.dtb \
5199 $source_path/pc-bios
/*.img \
5200 $source_path/pc-bios
/openbios-
* \
5201 $source_path/pc-bios
/palcode-
*
5203 FILES
="$FILES pc-bios/`basename $bios_file`"
5205 for test_file
in `find $source_path/tests/acpi-test-data -type f`
5207 FILES
="$FILES tests/acpi-test-data`echo $test_file | sed -e 's/.*acpi-test-data//'`"
5210 for f
in $FILES ; do
5211 if [ -e "$source_path/$f" ] && [ "$pwd_is_source_path" != "y" ]; then
5212 symlink
"$source_path/$f" "$f"
5216 # temporary config to build submodules
5217 for rom
in seabios vgabios
; do
5218 config_mak
=roms
/$rom/config.mak
5219 echo "# Automatically generated by configure - do not modify" > $config_mak
5220 echo "SRC_PATH=$source_path/roms/$rom" >> $config_mak
5221 echo "AS=$as" >> $config_mak
5222 echo "CC=$cc" >> $config_mak
5223 echo "BCC=bcc" >> $config_mak
5224 echo "CPP=$cpp" >> $config_mak
5225 echo "OBJCOPY=objcopy" >> $config_mak
5226 echo "IASL=$iasl" >> $config_mak
5227 echo "LD=$ld" >> $config_mak
5230 if test "$docs" = "yes" ; then
5234 # Save the configure command line for later reuse.
5235 cat <<EOD >config.status
5237 # Generated by configure.
5238 # Run this file to recreate the current configuration.
5239 # Compiler output produced by configure, useful for debugging
5240 # configure, is in config.log if it exists.
5242 printf "exec" >>config.status
5243 printf " '%s'" "$0" "$@" >>config.status
5244 echo >>config.status
5245 chmod +x config.status