2 * QEMU Sparc Sun4m ECC memory controller emulation
4 * Copyright (c) 2007 Robert Reif
6 * Permission is hereby granted, free of charge, to any person obtaining a copy
7 * of this software and associated documentation files (the "Software"), to deal
8 * in the Software without restriction, including without limitation the rights
9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10 * copies of the Software, and to permit persons to whom the Software is
11 * furnished to do so, subject to the following conditions:
13 * The above copyright notice and this permission notice shall be included in
14 * all copies or substantial portions of the Software.
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
31 #define DPRINTF(fmt, ...) \
32 do { printf("ECC: " fmt , ## __VA_ARGS__); } while (0)
34 #define DPRINTF(fmt, ...)
37 /* There are 3 versions of this chip used in SMP sun4m systems:
38 * MCC (version 0, implementation 0) SS-600MP
39 * EMC (version 0, implementation 1) SS-10
40 * SMC (version 0, implementation 2) SS-10SX and SS-20
43 #define ECC_MCC 0x00000000
44 #define ECC_EMC 0x10000000
45 #define ECC_SMC 0x20000000
47 /* Register indexes */
48 #define ECC_MER 0 /* Memory Enable Register */
49 #define ECC_MDR 1 /* Memory Delay Register */
50 #define ECC_MFSR 2 /* Memory Fault Status Register */
51 #define ECC_VCR 3 /* Video Configuration Register */
52 #define ECC_MFAR0 4 /* Memory Fault Address Register 0 */
53 #define ECC_MFAR1 5 /* Memory Fault Address Register 1 */
54 #define ECC_DR 6 /* Diagnostic Register */
55 #define ECC_ECR0 7 /* Event Count Register 0 */
56 #define ECC_ECR1 8 /* Event Count Register 1 */
58 /* ECC fault control register */
59 #define ECC_MER_EE 0x00000001 /* Enable ECC checking */
60 #define ECC_MER_EI 0x00000002 /* Enable Interrupts on
62 #define ECC_MER_MRR0 0x00000004 /* SIMM 0 */
63 #define ECC_MER_MRR1 0x00000008 /* SIMM 1 */
64 #define ECC_MER_MRR2 0x00000010 /* SIMM 2 */
65 #define ECC_MER_MRR3 0x00000020 /* SIMM 3 */
66 #define ECC_MER_MRR4 0x00000040 /* SIMM 4 */
67 #define ECC_MER_MRR5 0x00000080 /* SIMM 5 */
68 #define ECC_MER_MRR6 0x00000100 /* SIMM 6 */
69 #define ECC_MER_MRR7 0x00000200 /* SIMM 7 */
70 #define ECC_MER_REU 0x00000100 /* Memory Refresh Enable (600MP) */
71 #define ECC_MER_MRR 0x000003fc /* MRR mask */
72 #define ECC_MER_A 0x00000400 /* Memory controller addr map select */
73 #define ECC_MER_DCI 0x00000800 /* Disables Coherent Invalidate ACK */
74 #define ECC_MER_VER 0x0f000000 /* Version */
75 #define ECC_MER_IMPL 0xf0000000 /* Implementation */
76 #define ECC_MER_MASK_0 0x00000103 /* Version 0 (MCC) mask */
77 #define ECC_MER_MASK_1 0x00000bff /* Version 1 (EMC) mask */
78 #define ECC_MER_MASK_2 0x00000bff /* Version 2 (SMC) mask */
80 /* ECC memory delay register */
81 #define ECC_MDR_RRI 0x000003ff /* Refresh Request Interval */
82 #define ECC_MDR_MI 0x00001c00 /* MIH Delay */
83 #define ECC_MDR_CI 0x0000e000 /* Coherent Invalidate Delay */
84 #define ECC_MDR_MDL 0x001f0000 /* MBus Master arbitration delay */
85 #define ECC_MDR_MDH 0x03e00000 /* MBus Master arbitration delay */
86 #define ECC_MDR_GAD 0x7c000000 /* Graphics Arbitration Delay */
87 #define ECC_MDR_RSC 0x80000000 /* Refresh load control */
88 #define ECC_MDR_MASK 0x7fffffff
90 /* ECC fault status register */
91 #define ECC_MFSR_CE 0x00000001 /* Correctable error */
92 #define ECC_MFSR_BS 0x00000002 /* C2 graphics bad slot access */
93 #define ECC_MFSR_TO 0x00000004 /* Timeout on write */
94 #define ECC_MFSR_UE 0x00000008 /* Uncorrectable error */
95 #define ECC_MFSR_DW 0x000000f0 /* Index of double word in block */
96 #define ECC_MFSR_SYND 0x0000ff00 /* Syndrome for correctable error */
97 #define ECC_MFSR_ME 0x00010000 /* Multiple errors */
98 #define ECC_MFSR_C2ERR 0x00020000 /* C2 graphics error */
100 /* ECC fault address register 0 */
101 #define ECC_MFAR0_PADDR 0x0000000f /* PA[32-35] */
102 #define ECC_MFAR0_TYPE 0x000000f0 /* Transaction type */
103 #define ECC_MFAR0_SIZE 0x00000700 /* Transaction size */
104 #define ECC_MFAR0_CACHE 0x00000800 /* Mapped cacheable */
105 #define ECC_MFAR0_LOCK 0x00001000 /* Error occurred in atomic cycle */
106 #define ECC_MFAR0_BMODE 0x00002000 /* Boot mode */
107 #define ECC_MFAR0_VADDR 0x003fc000 /* VA[12-19] (superset bits) */
108 #define ECC_MFAR0_S 0x08000000 /* Supervisor mode */
109 #define ECC_MFARO_MID 0xf0000000 /* Module ID */
111 /* ECC diagnostic register */
112 #define ECC_DR_CBX 0x00000001
113 #define ECC_DR_CB0 0x00000002
114 #define ECC_DR_CB1 0x00000004
115 #define ECC_DR_CB2 0x00000008
116 #define ECC_DR_CB4 0x00000010
117 #define ECC_DR_CB8 0x00000020
118 #define ECC_DR_CB16 0x00000040
119 #define ECC_DR_CB32 0x00000080
120 #define ECC_DR_DMODE 0x00000c00
123 #define ECC_SIZE (ECC_NREGS * sizeof(uint32_t))
125 #define ECC_DIAG_SIZE 4
126 #define ECC_DIAG_MASK (ECC_DIAG_SIZE - 1)
128 typedef struct ECCState
{
130 uint32_t regs
[ECC_NREGS
];
131 uint8_t diag
[ECC_DIAG_SIZE
];
135 static void ecc_mem_writel(void *opaque
, target_phys_addr_t addr
, uint32_t val
)
137 ECCState
*s
= opaque
;
141 if (s
->version
== ECC_MCC
)
142 s
->regs
[ECC_MER
] = (val
& ECC_MER_MASK_0
);
143 else if (s
->version
== ECC_EMC
)
144 s
->regs
[ECC_MER
] = s
->version
| (val
& ECC_MER_MASK_1
);
145 else if (s
->version
== ECC_SMC
)
146 s
->regs
[ECC_MER
] = s
->version
| (val
& ECC_MER_MASK_2
);
147 DPRINTF("Write memory enable %08x\n", val
);
150 s
->regs
[ECC_MDR
] = val
& ECC_MDR_MASK
;
151 DPRINTF("Write memory delay %08x\n", val
);
154 s
->regs
[ECC_MFSR
] = val
;
155 qemu_irq_lower(s
->irq
);
156 DPRINTF("Write memory fault status %08x\n", val
);
159 s
->regs
[ECC_VCR
] = val
;
160 DPRINTF("Write slot configuration %08x\n", val
);
163 s
->regs
[ECC_DR
] = val
;
164 DPRINTF("Write diagnostic %08x\n", val
);
167 s
->regs
[ECC_ECR0
] = val
;
168 DPRINTF("Write event count 1 %08x\n", val
);
171 s
->regs
[ECC_ECR0
] = val
;
172 DPRINTF("Write event count 2 %08x\n", val
);
177 static uint32_t ecc_mem_readl(void *opaque
, target_phys_addr_t addr
)
179 ECCState
*s
= opaque
;
184 ret
= s
->regs
[ECC_MER
];
185 DPRINTF("Read memory enable %08x\n", ret
);
188 ret
= s
->regs
[ECC_MDR
];
189 DPRINTF("Read memory delay %08x\n", ret
);
192 ret
= s
->regs
[ECC_MFSR
];
193 DPRINTF("Read memory fault status %08x\n", ret
);
196 ret
= s
->regs
[ECC_VCR
];
197 DPRINTF("Read slot configuration %08x\n", ret
);
200 ret
= s
->regs
[ECC_MFAR0
];
201 DPRINTF("Read memory fault address 0 %08x\n", ret
);
204 ret
= s
->regs
[ECC_MFAR1
];
205 DPRINTF("Read memory fault address 1 %08x\n", ret
);
208 ret
= s
->regs
[ECC_DR
];
209 DPRINTF("Read diagnostic %08x\n", ret
);
212 ret
= s
->regs
[ECC_ECR0
];
213 DPRINTF("Read event count 1 %08x\n", ret
);
216 ret
= s
->regs
[ECC_ECR0
];
217 DPRINTF("Read event count 2 %08x\n", ret
);
223 static CPUReadMemoryFunc
*ecc_mem_read
[3] = {
229 static CPUWriteMemoryFunc
*ecc_mem_write
[3] = {
235 static void ecc_diag_mem_writeb(void *opaque
, target_phys_addr_t addr
,
238 ECCState
*s
= opaque
;
240 DPRINTF("Write diagnostic[%d] = %02x\n", (int)addr
, val
);
241 s
->diag
[addr
& ECC_DIAG_MASK
] = val
;
244 static uint32_t ecc_diag_mem_readb(void *opaque
, target_phys_addr_t addr
)
246 ECCState
*s
= opaque
;
247 uint32_t ret
= s
->diag
[(int)addr
];
249 DPRINTF("Read diagnostic[%d] = %02x\n", (int)addr
, ret
);
253 static CPUReadMemoryFunc
*ecc_diag_mem_read
[3] = {
259 static CPUWriteMemoryFunc
*ecc_diag_mem_write
[3] = {
265 static int ecc_load(QEMUFile
*f
, void *opaque
, int version_id
)
267 ECCState
*s
= opaque
;
273 for (i
= 0; i
< ECC_NREGS
; i
++)
274 qemu_get_be32s(f
, &s
->regs
[i
]);
276 for (i
= 0; i
< ECC_DIAG_SIZE
; i
++)
277 qemu_get_8s(f
, &s
->diag
[i
]);
279 qemu_get_be32s(f
, &s
->version
);
284 static void ecc_save(QEMUFile
*f
, void *opaque
)
286 ECCState
*s
= opaque
;
289 for (i
= 0; i
< ECC_NREGS
; i
++)
290 qemu_put_be32s(f
, &s
->regs
[i
]);
292 for (i
= 0; i
< ECC_DIAG_SIZE
; i
++)
293 qemu_put_8s(f
, &s
->diag
[i
]);
295 qemu_put_be32s(f
, &s
->version
);
298 static void ecc_reset(void *opaque
)
300 ECCState
*s
= opaque
;
302 if (s
->version
== ECC_MCC
)
303 s
->regs
[ECC_MER
] &= ECC_MER_REU
;
305 s
->regs
[ECC_MER
] &= (ECC_MER_VER
| ECC_MER_IMPL
| ECC_MER_MRR
|
307 s
->regs
[ECC_MDR
] = 0x20;
308 s
->regs
[ECC_MFSR
] = 0;
309 s
->regs
[ECC_VCR
] = 0;
310 s
->regs
[ECC_MFAR0
] = 0x07c00000;
311 s
->regs
[ECC_MFAR1
] = 0;
313 s
->regs
[ECC_ECR0
] = 0;
314 s
->regs
[ECC_ECR1
] = 0;
317 void * ecc_init(target_phys_addr_t base
, qemu_irq irq
, uint32_t version
)
322 s
= qemu_mallocz(sizeof(ECCState
));
324 s
->version
= version
;
325 s
->regs
[0] = version
;
328 ecc_io_memory
= cpu_register_io_memory(ecc_mem_read
, ecc_mem_write
, s
);
329 cpu_register_physical_memory(base
, ECC_SIZE
, ecc_io_memory
);
330 if (version
== ECC_MCC
) { // SS-600MP only
331 ecc_io_memory
= cpu_register_io_memory(ecc_diag_mem_read
,
332 ecc_diag_mem_write
, s
);
333 cpu_register_physical_memory(base
+ 0x1000, ECC_DIAG_SIZE
,
336 register_savevm("ECC", base
, 3, ecc_save
, ecc_load
, s
);
337 qemu_register_reset(ecc_reset
, s
);