2 * QEMU System Emulator block driver
4 * Copyright (c) 2003 Fabrice Bellard
6 * Permission is hereby granted, free of charge, to any person obtaining a copy
7 * of this software and associated documentation files (the "Software"), to deal
8 * in the Software without restriction, including without limitation the rights
9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10 * copies of the Software, and to permit persons to whom the Software is
11 * furnished to do so, subject to the following conditions:
13 * The above copyright notice and this permission notice shall be included in
14 * all copies or substantial portions of the Software.
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
24 #include "config-host.h"
25 #include "qemu-common.h"
27 #include "monitor/monitor.h"
28 #include "block/block_int.h"
29 #include "block/blockjob.h"
30 #include "qemu/module.h"
31 #include "qapi/qmp/qjson.h"
32 #include "sysemu/sysemu.h"
33 #include "qemu/notify.h"
34 #include "block/coroutine.h"
35 #include "qmp-commands.h"
36 #include "qemu/timer.h"
39 #include <sys/types.h>
41 #include <sys/ioctl.h>
42 #include <sys/queue.h>
52 struct BdrvDirtyBitmap
{
54 QLIST_ENTRY(BdrvDirtyBitmap
) list
;
57 #define NOT_DONE 0x7fffffff /* used while emulated sync operation in progress */
59 static void bdrv_dev_change_media_cb(BlockDriverState
*bs
, bool load
);
60 static BlockDriverAIOCB
*bdrv_aio_readv_em(BlockDriverState
*bs
,
61 int64_t sector_num
, QEMUIOVector
*qiov
, int nb_sectors
,
62 BlockDriverCompletionFunc
*cb
, void *opaque
);
63 static BlockDriverAIOCB
*bdrv_aio_writev_em(BlockDriverState
*bs
,
64 int64_t sector_num
, QEMUIOVector
*qiov
, int nb_sectors
,
65 BlockDriverCompletionFunc
*cb
, void *opaque
);
66 static int coroutine_fn
bdrv_co_readv_em(BlockDriverState
*bs
,
67 int64_t sector_num
, int nb_sectors
,
69 static int coroutine_fn
bdrv_co_writev_em(BlockDriverState
*bs
,
70 int64_t sector_num
, int nb_sectors
,
72 static int coroutine_fn
bdrv_co_do_readv(BlockDriverState
*bs
,
73 int64_t sector_num
, int nb_sectors
, QEMUIOVector
*qiov
,
74 BdrvRequestFlags flags
);
75 static int coroutine_fn
bdrv_co_do_writev(BlockDriverState
*bs
,
76 int64_t sector_num
, int nb_sectors
, QEMUIOVector
*qiov
,
77 BdrvRequestFlags flags
);
78 static BlockDriverAIOCB
*bdrv_co_aio_rw_vector(BlockDriverState
*bs
,
82 BdrvRequestFlags flags
,
83 BlockDriverCompletionFunc
*cb
,
86 static void coroutine_fn
bdrv_co_do_rw(void *opaque
);
87 static int coroutine_fn
bdrv_co_do_write_zeroes(BlockDriverState
*bs
,
88 int64_t sector_num
, int nb_sectors
, BdrvRequestFlags flags
);
90 static QTAILQ_HEAD(, BlockDriverState
) bdrv_states
=
91 QTAILQ_HEAD_INITIALIZER(bdrv_states
);
93 static QLIST_HEAD(, BlockDriver
) bdrv_drivers
=
94 QLIST_HEAD_INITIALIZER(bdrv_drivers
);
96 /* If non-zero, use only whitelisted block drivers */
97 static int use_bdrv_whitelist
;
100 static int is_windows_drive_prefix(const char *filename
)
102 return (((filename
[0] >= 'a' && filename
[0] <= 'z') ||
103 (filename
[0] >= 'A' && filename
[0] <= 'Z')) &&
107 int is_windows_drive(const char *filename
)
109 if (is_windows_drive_prefix(filename
) &&
112 if (strstart(filename
, "\\\\.\\", NULL
) ||
113 strstart(filename
, "//./", NULL
))
119 /* throttling disk I/O limits */
120 void bdrv_set_io_limits(BlockDriverState
*bs
,
125 throttle_config(&bs
->throttle_state
, cfg
);
127 for (i
= 0; i
< 2; i
++) {
128 qemu_co_enter_next(&bs
->throttled_reqs
[i
]);
132 /* this function drain all the throttled IOs */
133 static bool bdrv_start_throttled_reqs(BlockDriverState
*bs
)
135 bool drained
= false;
136 bool enabled
= bs
->io_limits_enabled
;
139 bs
->io_limits_enabled
= false;
141 for (i
= 0; i
< 2; i
++) {
142 while (qemu_co_enter_next(&bs
->throttled_reqs
[i
])) {
147 bs
->io_limits_enabled
= enabled
;
152 void bdrv_io_limits_disable(BlockDriverState
*bs
)
154 bs
->io_limits_enabled
= false;
156 bdrv_start_throttled_reqs(bs
);
158 throttle_destroy(&bs
->throttle_state
);
161 static void bdrv_throttle_read_timer_cb(void *opaque
)
163 BlockDriverState
*bs
= opaque
;
164 qemu_co_enter_next(&bs
->throttled_reqs
[0]);
167 static void bdrv_throttle_write_timer_cb(void *opaque
)
169 BlockDriverState
*bs
= opaque
;
170 qemu_co_enter_next(&bs
->throttled_reqs
[1]);
173 /* should be called before bdrv_set_io_limits if a limit is set */
174 void bdrv_io_limits_enable(BlockDriverState
*bs
)
176 assert(!bs
->io_limits_enabled
);
177 throttle_init(&bs
->throttle_state
,
179 bdrv_throttle_read_timer_cb
,
180 bdrv_throttle_write_timer_cb
,
182 bs
->io_limits_enabled
= true;
185 /* This function makes an IO wait if needed
187 * @nb_sectors: the number of sectors of the IO
188 * @is_write: is the IO a write
190 static void bdrv_io_limits_intercept(BlockDriverState
*bs
,
194 /* does this io must wait */
195 bool must_wait
= throttle_schedule_timer(&bs
->throttle_state
, is_write
);
197 /* if must wait or any request of this type throttled queue the IO */
199 !qemu_co_queue_empty(&bs
->throttled_reqs
[is_write
])) {
200 qemu_co_queue_wait(&bs
->throttled_reqs
[is_write
]);
203 /* the IO will be executed, do the accounting */
204 throttle_account(&bs
->throttle_state
,
206 nb_sectors
* BDRV_SECTOR_SIZE
);
208 /* if the next request must wait -> do nothing */
209 if (throttle_schedule_timer(&bs
->throttle_state
, is_write
)) {
213 /* else queue next request for execution */
214 qemu_co_queue_next(&bs
->throttled_reqs
[is_write
]);
217 /* check if the path starts with "<protocol>:" */
218 static int path_has_protocol(const char *path
)
223 if (is_windows_drive(path
) ||
224 is_windows_drive_prefix(path
)) {
227 p
= path
+ strcspn(path
, ":/\\");
229 p
= path
+ strcspn(path
, ":/");
235 int path_is_absolute(const char *path
)
238 /* specific case for names like: "\\.\d:" */
239 if (is_windows_drive(path
) || is_windows_drive_prefix(path
)) {
242 return (*path
== '/' || *path
== '\\');
244 return (*path
== '/');
248 /* if filename is absolute, just copy it to dest. Otherwise, build a
249 path to it by considering it is relative to base_path. URL are
251 void path_combine(char *dest
, int dest_size
,
252 const char *base_path
,
253 const char *filename
)
260 if (path_is_absolute(filename
)) {
261 pstrcpy(dest
, dest_size
, filename
);
263 p
= strchr(base_path
, ':');
268 p1
= strrchr(base_path
, '/');
272 p2
= strrchr(base_path
, '\\');
284 if (len
> dest_size
- 1)
286 memcpy(dest
, base_path
, len
);
288 pstrcat(dest
, dest_size
, filename
);
292 void bdrv_get_full_backing_filename(BlockDriverState
*bs
, char *dest
, size_t sz
)
294 if (bs
->backing_file
[0] == '\0' || path_has_protocol(bs
->backing_file
)) {
295 pstrcpy(dest
, sz
, bs
->backing_file
);
297 path_combine(dest
, sz
, bs
->filename
, bs
->backing_file
);
301 void bdrv_register(BlockDriver
*bdrv
)
303 /* Block drivers without coroutine functions need emulation */
304 if (!bdrv
->bdrv_co_readv
) {
305 bdrv
->bdrv_co_readv
= bdrv_co_readv_em
;
306 bdrv
->bdrv_co_writev
= bdrv_co_writev_em
;
308 /* bdrv_co_readv_em()/brdv_co_writev_em() work in terms of aio, so if
309 * the block driver lacks aio we need to emulate that too.
311 if (!bdrv
->bdrv_aio_readv
) {
312 /* add AIO emulation layer */
313 bdrv
->bdrv_aio_readv
= bdrv_aio_readv_em
;
314 bdrv
->bdrv_aio_writev
= bdrv_aio_writev_em
;
318 QLIST_INSERT_HEAD(&bdrv_drivers
, bdrv
, list
);
321 /* create a new block device (by default it is empty) */
322 BlockDriverState
*bdrv_new(const char *device_name
)
324 BlockDriverState
*bs
;
326 bs
= g_malloc0(sizeof(BlockDriverState
));
327 QLIST_INIT(&bs
->dirty_bitmaps
);
328 pstrcpy(bs
->device_name
, sizeof(bs
->device_name
), device_name
);
329 if (device_name
[0] != '\0') {
330 QTAILQ_INSERT_TAIL(&bdrv_states
, bs
, list
);
332 bdrv_iostatus_disable(bs
);
333 notifier_list_init(&bs
->close_notifiers
);
334 notifier_with_return_list_init(&bs
->before_write_notifiers
);
335 qemu_co_queue_init(&bs
->throttled_reqs
[0]);
336 qemu_co_queue_init(&bs
->throttled_reqs
[1]);
342 void bdrv_add_close_notifier(BlockDriverState
*bs
, Notifier
*notify
)
344 notifier_list_add(&bs
->close_notifiers
, notify
);
347 BlockDriver
*bdrv_find_format(const char *format_name
)
350 QLIST_FOREACH(drv1
, &bdrv_drivers
, list
) {
351 if (!strcmp(drv1
->format_name
, format_name
)) {
358 static int bdrv_is_whitelisted(BlockDriver
*drv
, bool read_only
)
360 static const char *whitelist_rw
[] = {
361 CONFIG_BDRV_RW_WHITELIST
363 static const char *whitelist_ro
[] = {
364 CONFIG_BDRV_RO_WHITELIST
368 if (!whitelist_rw
[0] && !whitelist_ro
[0]) {
369 return 1; /* no whitelist, anything goes */
372 for (p
= whitelist_rw
; *p
; p
++) {
373 if (!strcmp(drv
->format_name
, *p
)) {
378 for (p
= whitelist_ro
; *p
; p
++) {
379 if (!strcmp(drv
->format_name
, *p
)) {
387 BlockDriver
*bdrv_find_whitelisted_format(const char *format_name
,
390 BlockDriver
*drv
= bdrv_find_format(format_name
);
391 return drv
&& bdrv_is_whitelisted(drv
, read_only
) ? drv
: NULL
;
394 typedef struct CreateCo
{
397 QEMUOptionParameter
*options
;
402 static void coroutine_fn
bdrv_create_co_entry(void *opaque
)
404 Error
*local_err
= NULL
;
407 CreateCo
*cco
= opaque
;
410 ret
= cco
->drv
->bdrv_create(cco
->filename
, cco
->options
, &local_err
);
411 if (error_is_set(&local_err
)) {
412 error_propagate(&cco
->err
, local_err
);
417 int bdrv_create(BlockDriver
*drv
, const char* filename
,
418 QEMUOptionParameter
*options
, Error
**errp
)
425 .filename
= g_strdup(filename
),
431 if (!drv
->bdrv_create
) {
432 error_setg(errp
, "Driver '%s' does not support image creation", drv
->format_name
);
437 if (qemu_in_coroutine()) {
438 /* Fast-path if already in coroutine context */
439 bdrv_create_co_entry(&cco
);
441 co
= qemu_coroutine_create(bdrv_create_co_entry
);
442 qemu_coroutine_enter(co
, &cco
);
443 while (cco
.ret
== NOT_DONE
) {
450 if (error_is_set(&cco
.err
)) {
451 error_propagate(errp
, cco
.err
);
453 error_setg_errno(errp
, -ret
, "Could not create image");
458 g_free(cco
.filename
);
462 int bdrv_create_file(const char* filename
, QEMUOptionParameter
*options
,
466 Error
*local_err
= NULL
;
469 drv
= bdrv_find_protocol(filename
, true);
471 error_setg(errp
, "Could not find protocol for file '%s'", filename
);
475 ret
= bdrv_create(drv
, filename
, options
, &local_err
);
476 if (error_is_set(&local_err
)) {
477 error_propagate(errp
, local_err
);
483 * Create a uniquely-named empty temporary file.
484 * Return 0 upon success, otherwise a negative errno value.
486 int get_tmp_filename(char *filename
, int size
)
489 char temp_dir
[MAX_PATH
];
490 /* GetTempFileName requires that its output buffer (4th param)
491 have length MAX_PATH or greater. */
492 assert(size
>= MAX_PATH
);
493 return (GetTempPath(MAX_PATH
, temp_dir
)
494 && GetTempFileName(temp_dir
, "qem", 0, filename
)
495 ? 0 : -GetLastError());
499 tmpdir
= getenv("TMPDIR");
502 if (snprintf(filename
, size
, "%s/vl.XXXXXX", tmpdir
) >= size
) {
505 fd
= mkstemp(filename
);
509 if (close(fd
) != 0) {
518 * Detect host devices. By convention, /dev/cdrom[N] is always
519 * recognized as a host CDROM.
521 static BlockDriver
*find_hdev_driver(const char *filename
)
523 int score_max
= 0, score
;
524 BlockDriver
*drv
= NULL
, *d
;
526 QLIST_FOREACH(d
, &bdrv_drivers
, list
) {
527 if (d
->bdrv_probe_device
) {
528 score
= d
->bdrv_probe_device(filename
);
529 if (score
> score_max
) {
539 BlockDriver
*bdrv_find_protocol(const char *filename
,
540 bool allow_protocol_prefix
)
547 /* TODO Drivers without bdrv_file_open must be specified explicitly */
550 * XXX(hch): we really should not let host device detection
551 * override an explicit protocol specification, but moving this
552 * later breaks access to device names with colons in them.
553 * Thanks to the brain-dead persistent naming schemes on udev-
554 * based Linux systems those actually are quite common.
556 drv1
= find_hdev_driver(filename
);
561 if (!path_has_protocol(filename
) || !allow_protocol_prefix
) {
562 return bdrv_find_format("file");
565 p
= strchr(filename
, ':');
568 if (len
> sizeof(protocol
) - 1)
569 len
= sizeof(protocol
) - 1;
570 memcpy(protocol
, filename
, len
);
571 protocol
[len
] = '\0';
572 QLIST_FOREACH(drv1
, &bdrv_drivers
, list
) {
573 if (drv1
->protocol_name
&&
574 !strcmp(drv1
->protocol_name
, protocol
)) {
581 static int find_image_format(BlockDriverState
*bs
, const char *filename
,
582 BlockDriver
**pdrv
, Error
**errp
)
584 int score
, score_max
;
585 BlockDriver
*drv1
, *drv
;
589 /* Return the raw BlockDriver * to scsi-generic devices or empty drives */
590 if (bs
->sg
|| !bdrv_is_inserted(bs
) || bdrv_getlength(bs
) == 0) {
591 drv
= bdrv_find_format("raw");
593 error_setg(errp
, "Could not find raw image format");
600 ret
= bdrv_pread(bs
, 0, buf
, sizeof(buf
));
602 error_setg_errno(errp
, -ret
, "Could not read image for determining its "
610 QLIST_FOREACH(drv1
, &bdrv_drivers
, list
) {
611 if (drv1
->bdrv_probe
) {
612 score
= drv1
->bdrv_probe(buf
, ret
, filename
);
613 if (score
> score_max
) {
620 error_setg(errp
, "Could not determine image format: No compatible "
629 * Set the current 'total_sectors' value
631 static int refresh_total_sectors(BlockDriverState
*bs
, int64_t hint
)
633 BlockDriver
*drv
= bs
->drv
;
635 /* Do not attempt drv->bdrv_getlength() on scsi-generic devices */
639 /* query actual device if possible, otherwise just trust the hint */
640 if (drv
->bdrv_getlength
) {
641 int64_t length
= drv
->bdrv_getlength(bs
);
645 hint
= DIV_ROUND_UP(length
, BDRV_SECTOR_SIZE
);
648 bs
->total_sectors
= hint
;
653 * Set open flags for a given discard mode
655 * Return 0 on success, -1 if the discard mode was invalid.
657 int bdrv_parse_discard_flags(const char *mode
, int *flags
)
659 *flags
&= ~BDRV_O_UNMAP
;
661 if (!strcmp(mode
, "off") || !strcmp(mode
, "ignore")) {
663 } else if (!strcmp(mode
, "on") || !strcmp(mode
, "unmap")) {
664 *flags
|= BDRV_O_UNMAP
;
673 * Set open flags for a given cache mode
675 * Return 0 on success, -1 if the cache mode was invalid.
677 int bdrv_parse_cache_flags(const char *mode
, int *flags
)
679 *flags
&= ~BDRV_O_CACHE_MASK
;
681 if (!strcmp(mode
, "off") || !strcmp(mode
, "none")) {
682 *flags
|= BDRV_O_NOCACHE
| BDRV_O_CACHE_WB
;
683 } else if (!strcmp(mode
, "directsync")) {
684 *flags
|= BDRV_O_NOCACHE
;
685 } else if (!strcmp(mode
, "writeback")) {
686 *flags
|= BDRV_O_CACHE_WB
;
687 } else if (!strcmp(mode
, "unsafe")) {
688 *flags
|= BDRV_O_CACHE_WB
;
689 *flags
|= BDRV_O_NO_FLUSH
;
690 } else if (!strcmp(mode
, "writethrough")) {
691 /* this is the default */
700 * The copy-on-read flag is actually a reference count so multiple users may
701 * use the feature without worrying about clobbering its previous state.
702 * Copy-on-read stays enabled until all users have called to disable it.
704 void bdrv_enable_copy_on_read(BlockDriverState
*bs
)
709 void bdrv_disable_copy_on_read(BlockDriverState
*bs
)
711 assert(bs
->copy_on_read
> 0);
715 static int bdrv_open_flags(BlockDriverState
*bs
, int flags
)
717 int open_flags
= flags
| BDRV_O_CACHE_WB
;
720 * Clear flags that are internal to the block layer before opening the
723 open_flags
&= ~(BDRV_O_SNAPSHOT
| BDRV_O_NO_BACKING
);
726 * Snapshots should be writable.
728 if (bs
->is_temporary
) {
729 open_flags
|= BDRV_O_RDWR
;
736 * Common part for opening disk images and files
738 * Removes all processed options from *options.
740 static int bdrv_open_common(BlockDriverState
*bs
, BlockDriverState
*file
,
741 QDict
*options
, int flags
, BlockDriver
*drv
, Error
**errp
)
744 const char *filename
;
745 Error
*local_err
= NULL
;
748 assert(bs
->file
== NULL
);
749 assert(options
!= NULL
&& bs
->options
!= options
);
752 filename
= file
->filename
;
754 filename
= qdict_get_try_str(options
, "filename");
757 trace_bdrv_open_common(bs
, filename
?: "", flags
, drv
->format_name
);
759 /* bdrv_open() with directly using a protocol as drv. This layer is already
760 * opened, so assign it to bs (while file becomes a closed BlockDriverState)
761 * and return immediately. */
762 if (file
!= NULL
&& drv
->bdrv_file_open
) {
767 bs
->open_flags
= flags
;
768 bs
->buffer_alignment
= 512;
769 bs
->zero_beyond_eof
= true;
770 open_flags
= bdrv_open_flags(bs
, flags
);
771 bs
->read_only
= !(open_flags
& BDRV_O_RDWR
);
773 if (use_bdrv_whitelist
&& !bdrv_is_whitelisted(drv
, bs
->read_only
)) {
775 !bs
->read_only
&& bdrv_is_whitelisted(drv
, true)
776 ? "Driver '%s' can only be used for read-only devices"
777 : "Driver '%s' is not whitelisted",
782 assert(bs
->copy_on_read
== 0); /* bdrv_new() and bdrv_close() make it so */
783 if (flags
& BDRV_O_COPY_ON_READ
) {
784 if (!bs
->read_only
) {
785 bdrv_enable_copy_on_read(bs
);
787 error_setg(errp
, "Can't use copy-on-read on read-only device");
792 if (filename
!= NULL
) {
793 pstrcpy(bs
->filename
, sizeof(bs
->filename
), filename
);
795 bs
->filename
[0] = '\0';
799 bs
->opaque
= g_malloc0(drv
->instance_size
);
801 bs
->enable_write_cache
= !!(flags
& BDRV_O_CACHE_WB
);
803 /* Open the image, either directly or using a protocol */
804 if (drv
->bdrv_file_open
) {
805 assert(file
== NULL
);
806 assert(!drv
->bdrv_needs_filename
|| filename
!= NULL
);
807 ret
= drv
->bdrv_file_open(bs
, options
, open_flags
, &local_err
);
810 error_setg(errp
, "Can't use '%s' as a block driver for the "
811 "protocol level", drv
->format_name
);
816 ret
= drv
->bdrv_open(bs
, options
, open_flags
, &local_err
);
820 if (error_is_set(&local_err
)) {
821 error_propagate(errp
, local_err
);
822 } else if (bs
->filename
[0]) {
823 error_setg_errno(errp
, -ret
, "Could not open '%s'", bs
->filename
);
825 error_setg_errno(errp
, -ret
, "Could not open image");
830 ret
= refresh_total_sectors(bs
, bs
->total_sectors
);
832 error_setg_errno(errp
, -ret
, "Could not refresh total sector count");
837 if (bs
->is_temporary
) {
838 assert(bs
->filename
[0] != '\0');
839 unlink(bs
->filename
);
853 * Opens a file using a protocol (file, host_device, nbd, ...)
855 * options is a QDict of options to pass to the block drivers, or NULL for an
856 * empty set of options. The reference to the QDict belongs to the block layer
857 * after the call (even on failure), so if the caller intends to reuse the
858 * dictionary, it needs to use QINCREF() before calling bdrv_file_open.
860 int bdrv_file_open(BlockDriverState
**pbs
, const char *filename
,
861 QDict
*options
, int flags
, Error
**errp
)
863 BlockDriverState
*bs
;
866 bool allow_protocol_prefix
= false;
867 Error
*local_err
= NULL
;
870 /* NULL means an empty set of options */
871 if (options
== NULL
) {
872 options
= qdict_new();
876 bs
->options
= options
;
877 options
= qdict_clone_shallow(options
);
879 /* Fetch the file name from the options QDict if necessary */
881 filename
= qdict_get_try_str(options
, "filename");
882 } else if (filename
&& !qdict_haskey(options
, "filename")) {
883 qdict_put(options
, "filename", qstring_from_str(filename
));
884 allow_protocol_prefix
= true;
886 error_setg(errp
, "Can't specify 'file' and 'filename' options at the "
892 /* Find the right block driver */
893 drvname
= qdict_get_try_str(options
, "driver");
895 drv
= bdrv_find_format(drvname
);
897 error_setg(errp
, "Unknown driver '%s'", drvname
);
899 qdict_del(options
, "driver");
900 } else if (filename
) {
901 drv
= bdrv_find_protocol(filename
, allow_protocol_prefix
);
903 error_setg(errp
, "Unknown protocol");
906 error_setg(errp
, "Must specify either driver or file");
911 /* errp has been set already */
916 /* Parse the filename and open it */
917 if (drv
->bdrv_parse_filename
&& filename
) {
918 drv
->bdrv_parse_filename(filename
, options
, &local_err
);
919 if (error_is_set(&local_err
)) {
920 error_propagate(errp
, local_err
);
924 qdict_del(options
, "filename");
925 } else if (drv
->bdrv_needs_filename
&& !filename
) {
926 error_setg(errp
, "The '%s' block driver requires a file name",
932 ret
= bdrv_open_common(bs
, NULL
, options
, flags
, drv
, &local_err
);
934 error_propagate(errp
, local_err
);
938 /* Check if any unknown options were used */
939 if (qdict_size(options
) != 0) {
940 const QDictEntry
*entry
= qdict_first(options
);
941 error_setg(errp
, "Block protocol '%s' doesn't support the option '%s'",
942 drv
->format_name
, entry
->key
);
955 QDECREF(bs
->options
);
962 * Opens the backing file for a BlockDriverState if not yet open
964 * options is a QDict of options to pass to the block drivers, or NULL for an
965 * empty set of options. The reference to the QDict is transferred to this
966 * function (even on failure), so if the caller intends to reuse the dictionary,
967 * it needs to use QINCREF() before calling bdrv_file_open.
969 int bdrv_open_backing_file(BlockDriverState
*bs
, QDict
*options
, Error
**errp
)
971 char backing_filename
[PATH_MAX
];
973 BlockDriver
*back_drv
= NULL
;
974 Error
*local_err
= NULL
;
976 if (bs
->backing_hd
!= NULL
) {
981 /* NULL means an empty set of options */
982 if (options
== NULL
) {
983 options
= qdict_new();
986 bs
->open_flags
&= ~BDRV_O_NO_BACKING
;
987 if (qdict_haskey(options
, "file.filename")) {
988 backing_filename
[0] = '\0';
989 } else if (bs
->backing_file
[0] == '\0' && qdict_size(options
) == 0) {
993 bdrv_get_full_backing_filename(bs
, backing_filename
,
994 sizeof(backing_filename
));
997 bs
->backing_hd
= bdrv_new("");
999 if (bs
->backing_format
[0] != '\0') {
1000 back_drv
= bdrv_find_format(bs
->backing_format
);
1003 /* backing files always opened read-only */
1004 back_flags
= bs
->open_flags
& ~(BDRV_O_RDWR
| BDRV_O_SNAPSHOT
|
1005 BDRV_O_COPY_ON_READ
);
1007 ret
= bdrv_open(bs
->backing_hd
,
1008 *backing_filename
? backing_filename
: NULL
, options
,
1009 back_flags
, back_drv
, &local_err
);
1011 bdrv_unref(bs
->backing_hd
);
1012 bs
->backing_hd
= NULL
;
1013 bs
->open_flags
|= BDRV_O_NO_BACKING
;
1014 error_setg(errp
, "Could not open backing file: %s",
1015 error_get_pretty(local_err
));
1016 error_free(local_err
);
1019 pstrcpy(bs
->backing_file
, sizeof(bs
->backing_file
),
1020 bs
->backing_hd
->file
->filename
);
1025 * Opens a disk image (raw, qcow2, vmdk, ...)
1027 * options is a QDict of options to pass to the block drivers, or NULL for an
1028 * empty set of options. The reference to the QDict belongs to the block layer
1029 * after the call (even on failure), so if the caller intends to reuse the
1030 * dictionary, it needs to use QINCREF() before calling bdrv_open.
1032 int bdrv_open(BlockDriverState
*bs
, const char *filename
, QDict
*options
,
1033 int flags
, BlockDriver
*drv
, Error
**errp
)
1036 /* TODO: extra byte is a hack to ensure MAX_PATH space on Windows. */
1037 char tmp_filename
[PATH_MAX
+ 1];
1038 BlockDriverState
*file
= NULL
;
1039 QDict
*file_options
= NULL
;
1040 const char *drvname
;
1041 Error
*local_err
= NULL
;
1043 /* NULL means an empty set of options */
1044 if (options
== NULL
) {
1045 options
= qdict_new();
1048 bs
->options
= options
;
1049 options
= qdict_clone_shallow(options
);
1051 /* For snapshot=on, create a temporary qcow2 overlay */
1052 if (flags
& BDRV_O_SNAPSHOT
) {
1053 BlockDriverState
*bs1
;
1055 BlockDriver
*bdrv_qcow2
;
1056 QEMUOptionParameter
*create_options
;
1057 QDict
*snapshot_options
;
1059 /* if snapshot, we create a temporary backing file and open it
1060 instead of opening 'filename' directly */
1062 /* Get the required size from the image */
1065 ret
= bdrv_open(bs1
, filename
, options
, BDRV_O_NO_BACKING
,
1071 total_size
= bdrv_getlength(bs1
) & BDRV_SECTOR_MASK
;
1075 /* Create the temporary image */
1076 ret
= get_tmp_filename(tmp_filename
, sizeof(tmp_filename
));
1078 error_setg_errno(errp
, -ret
, "Could not get temporary filename");
1082 bdrv_qcow2
= bdrv_find_format("qcow2");
1083 create_options
= parse_option_parameters("", bdrv_qcow2
->create_options
,
1086 set_option_parameter_int(create_options
, BLOCK_OPT_SIZE
, total_size
);
1088 ret
= bdrv_create(bdrv_qcow2
, tmp_filename
, create_options
, &local_err
);
1089 free_option_parameters(create_options
);
1091 error_setg_errno(errp
, -ret
, "Could not create temporary overlay "
1092 "'%s': %s", tmp_filename
,
1093 error_get_pretty(local_err
));
1094 error_free(local_err
);
1099 /* Prepare a new options QDict for the temporary file, where user
1100 * options refer to the backing file */
1102 qdict_put(options
, "file.filename", qstring_from_str(filename
));
1105 qdict_put(options
, "driver", qstring_from_str(drv
->format_name
));
1108 snapshot_options
= qdict_new();
1109 qdict_put(snapshot_options
, "backing", options
);
1110 qdict_flatten(snapshot_options
);
1112 bs
->options
= snapshot_options
;
1113 options
= qdict_clone_shallow(bs
->options
);
1115 filename
= tmp_filename
;
1117 bs
->is_temporary
= 1;
1120 /* Open image file without format layer */
1121 if (flags
& BDRV_O_RDWR
) {
1122 flags
|= BDRV_O_ALLOW_RDWR
;
1125 qdict_extract_subqdict(options
, &file_options
, "file.");
1127 ret
= bdrv_file_open(&file
, filename
, file_options
,
1128 bdrv_open_flags(bs
, flags
| BDRV_O_UNMAP
), &local_err
);
1133 /* Find the right image format driver */
1134 drvname
= qdict_get_try_str(options
, "driver");
1136 drv
= bdrv_find_format(drvname
);
1137 qdict_del(options
, "driver");
1139 error_setg(errp
, "Invalid driver: '%s'", drvname
);
1141 goto unlink_and_fail
;
1146 ret
= find_image_format(file
, filename
, &drv
, &local_err
);
1150 goto unlink_and_fail
;
1153 /* Open the image */
1154 ret
= bdrv_open_common(bs
, file
, options
, flags
, drv
, &local_err
);
1156 goto unlink_and_fail
;
1159 if (bs
->file
!= file
) {
1164 /* If there is a backing file, use it */
1165 if ((flags
& BDRV_O_NO_BACKING
) == 0) {
1166 QDict
*backing_options
;
1168 qdict_extract_subqdict(options
, &backing_options
, "backing.");
1169 ret
= bdrv_open_backing_file(bs
, backing_options
, &local_err
);
1171 goto close_and_fail
;
1175 /* Check if any unknown options were used */
1176 if (qdict_size(options
) != 0) {
1177 const QDictEntry
*entry
= qdict_first(options
);
1178 error_setg(errp
, "Block format '%s' used by device '%s' doesn't "
1179 "support the option '%s'", drv
->format_name
, bs
->device_name
,
1183 goto close_and_fail
;
1187 if (!bdrv_key_required(bs
)) {
1188 bdrv_dev_change_media_cb(bs
, true);
1197 if (bs
->is_temporary
) {
1201 QDECREF(bs
->options
);
1204 if (error_is_set(&local_err
)) {
1205 error_propagate(errp
, local_err
);
1212 if (error_is_set(&local_err
)) {
1213 error_propagate(errp
, local_err
);
1218 typedef struct BlockReopenQueueEntry
{
1220 BDRVReopenState state
;
1221 QSIMPLEQ_ENTRY(BlockReopenQueueEntry
) entry
;
1222 } BlockReopenQueueEntry
;
1225 * Adds a BlockDriverState to a simple queue for an atomic, transactional
1226 * reopen of multiple devices.
1228 * bs_queue can either be an existing BlockReopenQueue that has had QSIMPLE_INIT
1229 * already performed, or alternatively may be NULL a new BlockReopenQueue will
1230 * be created and initialized. This newly created BlockReopenQueue should be
1231 * passed back in for subsequent calls that are intended to be of the same
1234 * bs is the BlockDriverState to add to the reopen queue.
1236 * flags contains the open flags for the associated bs
1238 * returns a pointer to bs_queue, which is either the newly allocated
1239 * bs_queue, or the existing bs_queue being used.
1242 BlockReopenQueue
*bdrv_reopen_queue(BlockReopenQueue
*bs_queue
,
1243 BlockDriverState
*bs
, int flags
)
1247 BlockReopenQueueEntry
*bs_entry
;
1248 if (bs_queue
== NULL
) {
1249 bs_queue
= g_new0(BlockReopenQueue
, 1);
1250 QSIMPLEQ_INIT(bs_queue
);
1254 bdrv_reopen_queue(bs_queue
, bs
->file
, flags
);
1257 bs_entry
= g_new0(BlockReopenQueueEntry
, 1);
1258 QSIMPLEQ_INSERT_TAIL(bs_queue
, bs_entry
, entry
);
1260 bs_entry
->state
.bs
= bs
;
1261 bs_entry
->state
.flags
= flags
;
1267 * Reopen multiple BlockDriverStates atomically & transactionally.
1269 * The queue passed in (bs_queue) must have been built up previous
1270 * via bdrv_reopen_queue().
1272 * Reopens all BDS specified in the queue, with the appropriate
1273 * flags. All devices are prepared for reopen, and failure of any
1274 * device will cause all device changes to be abandonded, and intermediate
1277 * If all devices prepare successfully, then the changes are committed
1281 int bdrv_reopen_multiple(BlockReopenQueue
*bs_queue
, Error
**errp
)
1284 BlockReopenQueueEntry
*bs_entry
, *next
;
1285 Error
*local_err
= NULL
;
1287 assert(bs_queue
!= NULL
);
1291 QSIMPLEQ_FOREACH(bs_entry
, bs_queue
, entry
) {
1292 if (bdrv_reopen_prepare(&bs_entry
->state
, bs_queue
, &local_err
)) {
1293 error_propagate(errp
, local_err
);
1296 bs_entry
->prepared
= true;
1299 /* If we reach this point, we have success and just need to apply the
1302 QSIMPLEQ_FOREACH(bs_entry
, bs_queue
, entry
) {
1303 bdrv_reopen_commit(&bs_entry
->state
);
1309 QSIMPLEQ_FOREACH_SAFE(bs_entry
, bs_queue
, entry
, next
) {
1310 if (ret
&& bs_entry
->prepared
) {
1311 bdrv_reopen_abort(&bs_entry
->state
);
1320 /* Reopen a single BlockDriverState with the specified flags. */
1321 int bdrv_reopen(BlockDriverState
*bs
, int bdrv_flags
, Error
**errp
)
1324 Error
*local_err
= NULL
;
1325 BlockReopenQueue
*queue
= bdrv_reopen_queue(NULL
, bs
, bdrv_flags
);
1327 ret
= bdrv_reopen_multiple(queue
, &local_err
);
1328 if (local_err
!= NULL
) {
1329 error_propagate(errp
, local_err
);
1336 * Prepares a BlockDriverState for reopen. All changes are staged in the
1337 * 'opaque' field of the BDRVReopenState, which is used and allocated by
1338 * the block driver layer .bdrv_reopen_prepare()
1340 * bs is the BlockDriverState to reopen
1341 * flags are the new open flags
1342 * queue is the reopen queue
1344 * Returns 0 on success, non-zero on error. On error errp will be set
1347 * On failure, bdrv_reopen_abort() will be called to clean up any data.
1348 * It is the responsibility of the caller to then call the abort() or
1349 * commit() for any other BDS that have been left in a prepare() state
1352 int bdrv_reopen_prepare(BDRVReopenState
*reopen_state
, BlockReopenQueue
*queue
,
1356 Error
*local_err
= NULL
;
1359 assert(reopen_state
!= NULL
);
1360 assert(reopen_state
->bs
->drv
!= NULL
);
1361 drv
= reopen_state
->bs
->drv
;
1363 /* if we are to stay read-only, do not allow permission change
1365 if (!(reopen_state
->bs
->open_flags
& BDRV_O_ALLOW_RDWR
) &&
1366 reopen_state
->flags
& BDRV_O_RDWR
) {
1367 error_set(errp
, QERR_DEVICE_IS_READ_ONLY
,
1368 reopen_state
->bs
->device_name
);
1373 ret
= bdrv_flush(reopen_state
->bs
);
1375 error_set(errp
, ERROR_CLASS_GENERIC_ERROR
, "Error (%s) flushing drive",
1380 if (drv
->bdrv_reopen_prepare
) {
1381 ret
= drv
->bdrv_reopen_prepare(reopen_state
, queue
, &local_err
);
1383 if (local_err
!= NULL
) {
1384 error_propagate(errp
, local_err
);
1386 error_setg(errp
, "failed while preparing to reopen image '%s'",
1387 reopen_state
->bs
->filename
);
1392 /* It is currently mandatory to have a bdrv_reopen_prepare()
1393 * handler for each supported drv. */
1394 error_set(errp
, QERR_BLOCK_FORMAT_FEATURE_NOT_SUPPORTED
,
1395 drv
->format_name
, reopen_state
->bs
->device_name
,
1396 "reopening of file");
1408 * Takes the staged changes for the reopen from bdrv_reopen_prepare(), and
1409 * makes them final by swapping the staging BlockDriverState contents into
1410 * the active BlockDriverState contents.
1412 void bdrv_reopen_commit(BDRVReopenState
*reopen_state
)
1416 assert(reopen_state
!= NULL
);
1417 drv
= reopen_state
->bs
->drv
;
1418 assert(drv
!= NULL
);
1420 /* If there are any driver level actions to take */
1421 if (drv
->bdrv_reopen_commit
) {
1422 drv
->bdrv_reopen_commit(reopen_state
);
1425 /* set BDS specific flags now */
1426 reopen_state
->bs
->open_flags
= reopen_state
->flags
;
1427 reopen_state
->bs
->enable_write_cache
= !!(reopen_state
->flags
&
1429 reopen_state
->bs
->read_only
= !(reopen_state
->flags
& BDRV_O_RDWR
);
1433 * Abort the reopen, and delete and free the staged changes in
1436 void bdrv_reopen_abort(BDRVReopenState
*reopen_state
)
1440 assert(reopen_state
!= NULL
);
1441 drv
= reopen_state
->bs
->drv
;
1442 assert(drv
!= NULL
);
1444 if (drv
->bdrv_reopen_abort
) {
1445 drv
->bdrv_reopen_abort(reopen_state
);
1450 void bdrv_close(BlockDriverState
*bs
)
1453 block_job_cancel_sync(bs
->job
);
1455 bdrv_drain_all(); /* complete I/O */
1457 bdrv_drain_all(); /* in case flush left pending I/O */
1458 notifier_list_notify(&bs
->close_notifiers
, bs
);
1461 if (bs
->backing_hd
) {
1462 bdrv_unref(bs
->backing_hd
);
1463 bs
->backing_hd
= NULL
;
1465 bs
->drv
->bdrv_close(bs
);
1468 if (bs
->is_temporary
) {
1469 unlink(bs
->filename
);
1474 bs
->copy_on_read
= 0;
1475 bs
->backing_file
[0] = '\0';
1476 bs
->backing_format
[0] = '\0';
1477 bs
->total_sectors
= 0;
1482 bs
->zero_beyond_eof
= false;
1483 QDECREF(bs
->options
);
1486 if (bs
->file
!= NULL
) {
1487 bdrv_unref(bs
->file
);
1492 bdrv_dev_change_media_cb(bs
, false);
1494 /*throttling disk I/O limits*/
1495 if (bs
->io_limits_enabled
) {
1496 bdrv_io_limits_disable(bs
);
1500 void bdrv_close_all(void)
1502 BlockDriverState
*bs
;
1504 QTAILQ_FOREACH(bs
, &bdrv_states
, list
) {
1509 /* Check if any requests are in-flight (including throttled requests) */
1510 static bool bdrv_requests_pending(BlockDriverState
*bs
)
1512 if (!QLIST_EMPTY(&bs
->tracked_requests
)) {
1515 if (!qemu_co_queue_empty(&bs
->throttled_reqs
[0])) {
1518 if (!qemu_co_queue_empty(&bs
->throttled_reqs
[1])) {
1521 if (bs
->file
&& bdrv_requests_pending(bs
->file
)) {
1524 if (bs
->backing_hd
&& bdrv_requests_pending(bs
->backing_hd
)) {
1530 static bool bdrv_requests_pending_all(void)
1532 BlockDriverState
*bs
;
1533 QTAILQ_FOREACH(bs
, &bdrv_states
, list
) {
1534 if (bdrv_requests_pending(bs
)) {
1542 * Wait for pending requests to complete across all BlockDriverStates
1544 * This function does not flush data to disk, use bdrv_flush_all() for that
1545 * after calling this function.
1547 * Note that completion of an asynchronous I/O operation can trigger any
1548 * number of other I/O operations on other devices---for example a coroutine
1549 * can be arbitrarily complex and a constant flow of I/O can come until the
1550 * coroutine is complete. Because of this, it is not possible to have a
1551 * function to drain a single device's I/O queue.
1553 void bdrv_drain_all(void)
1555 /* Always run first iteration so any pending completion BHs run */
1557 BlockDriverState
*bs
;
1560 QTAILQ_FOREACH(bs
, &bdrv_states
, list
) {
1561 bdrv_start_throttled_reqs(bs
);
1564 busy
= bdrv_requests_pending_all();
1565 busy
|= aio_poll(qemu_get_aio_context(), busy
);
1569 /* make a BlockDriverState anonymous by removing from bdrv_state list.
1570 Also, NULL terminate the device_name to prevent double remove */
1571 void bdrv_make_anon(BlockDriverState
*bs
)
1573 if (bs
->device_name
[0] != '\0') {
1574 QTAILQ_REMOVE(&bdrv_states
, bs
, list
);
1576 bs
->device_name
[0] = '\0';
1579 static void bdrv_rebind(BlockDriverState
*bs
)
1581 if (bs
->drv
&& bs
->drv
->bdrv_rebind
) {
1582 bs
->drv
->bdrv_rebind(bs
);
1586 static void bdrv_move_feature_fields(BlockDriverState
*bs_dest
,
1587 BlockDriverState
*bs_src
)
1589 /* move some fields that need to stay attached to the device */
1590 bs_dest
->open_flags
= bs_src
->open_flags
;
1593 bs_dest
->dev_ops
= bs_src
->dev_ops
;
1594 bs_dest
->dev_opaque
= bs_src
->dev_opaque
;
1595 bs_dest
->dev
= bs_src
->dev
;
1596 bs_dest
->buffer_alignment
= bs_src
->buffer_alignment
;
1597 bs_dest
->copy_on_read
= bs_src
->copy_on_read
;
1599 bs_dest
->enable_write_cache
= bs_src
->enable_write_cache
;
1601 /* i/o throttled req */
1602 memcpy(&bs_dest
->throttle_state
,
1603 &bs_src
->throttle_state
,
1604 sizeof(ThrottleState
));
1605 bs_dest
->throttled_reqs
[0] = bs_src
->throttled_reqs
[0];
1606 bs_dest
->throttled_reqs
[1] = bs_src
->throttled_reqs
[1];
1607 bs_dest
->io_limits_enabled
= bs_src
->io_limits_enabled
;
1610 bs_dest
->on_read_error
= bs_src
->on_read_error
;
1611 bs_dest
->on_write_error
= bs_src
->on_write_error
;
1614 bs_dest
->iostatus_enabled
= bs_src
->iostatus_enabled
;
1615 bs_dest
->iostatus
= bs_src
->iostatus
;
1618 bs_dest
->dirty_bitmaps
= bs_src
->dirty_bitmaps
;
1620 /* reference count */
1621 bs_dest
->refcnt
= bs_src
->refcnt
;
1624 bs_dest
->in_use
= bs_src
->in_use
;
1625 bs_dest
->job
= bs_src
->job
;
1627 /* keep the same entry in bdrv_states */
1628 pstrcpy(bs_dest
->device_name
, sizeof(bs_dest
->device_name
),
1629 bs_src
->device_name
);
1630 bs_dest
->list
= bs_src
->list
;
1634 * Swap bs contents for two image chains while they are live,
1635 * while keeping required fields on the BlockDriverState that is
1636 * actually attached to a device.
1638 * This will modify the BlockDriverState fields, and swap contents
1639 * between bs_new and bs_old. Both bs_new and bs_old are modified.
1641 * bs_new is required to be anonymous.
1643 * This function does not create any image files.
1645 void bdrv_swap(BlockDriverState
*bs_new
, BlockDriverState
*bs_old
)
1647 BlockDriverState tmp
;
1649 /* bs_new must be anonymous and shouldn't have anything fancy enabled */
1650 assert(bs_new
->device_name
[0] == '\0');
1651 assert(QLIST_EMPTY(&bs_new
->dirty_bitmaps
));
1652 assert(bs_new
->job
== NULL
);
1653 assert(bs_new
->dev
== NULL
);
1654 assert(bs_new
->in_use
== 0);
1655 assert(bs_new
->io_limits_enabled
== false);
1656 assert(!throttle_have_timer(&bs_new
->throttle_state
));
1662 /* there are some fields that should not be swapped, move them back */
1663 bdrv_move_feature_fields(&tmp
, bs_old
);
1664 bdrv_move_feature_fields(bs_old
, bs_new
);
1665 bdrv_move_feature_fields(bs_new
, &tmp
);
1667 /* bs_new shouldn't be in bdrv_states even after the swap! */
1668 assert(bs_new
->device_name
[0] == '\0');
1670 /* Check a few fields that should remain attached to the device */
1671 assert(bs_new
->dev
== NULL
);
1672 assert(bs_new
->job
== NULL
);
1673 assert(bs_new
->in_use
== 0);
1674 assert(bs_new
->io_limits_enabled
== false);
1675 assert(!throttle_have_timer(&bs_new
->throttle_state
));
1677 bdrv_rebind(bs_new
);
1678 bdrv_rebind(bs_old
);
1682 * Add new bs contents at the top of an image chain while the chain is
1683 * live, while keeping required fields on the top layer.
1685 * This will modify the BlockDriverState fields, and swap contents
1686 * between bs_new and bs_top. Both bs_new and bs_top are modified.
1688 * bs_new is required to be anonymous.
1690 * This function does not create any image files.
1692 void bdrv_append(BlockDriverState
*bs_new
, BlockDriverState
*bs_top
)
1694 bdrv_swap(bs_new
, bs_top
);
1696 /* The contents of 'tmp' will become bs_top, as we are
1697 * swapping bs_new and bs_top contents. */
1698 bs_top
->backing_hd
= bs_new
;
1699 bs_top
->open_flags
&= ~BDRV_O_NO_BACKING
;
1700 pstrcpy(bs_top
->backing_file
, sizeof(bs_top
->backing_file
),
1702 pstrcpy(bs_top
->backing_format
, sizeof(bs_top
->backing_format
),
1703 bs_new
->drv
? bs_new
->drv
->format_name
: "");
1706 static void bdrv_delete(BlockDriverState
*bs
)
1710 assert(!bs
->in_use
);
1711 assert(!bs
->refcnt
);
1712 assert(QLIST_EMPTY(&bs
->dirty_bitmaps
));
1716 /* remove from list, if necessary */
1722 int bdrv_attach_dev(BlockDriverState
*bs
, void *dev
)
1723 /* TODO change to DeviceState *dev when all users are qdevified */
1729 bdrv_iostatus_reset(bs
);
1733 /* TODO qdevified devices don't use this, remove when devices are qdevified */
1734 void bdrv_attach_dev_nofail(BlockDriverState
*bs
, void *dev
)
1736 if (bdrv_attach_dev(bs
, dev
) < 0) {
1741 void bdrv_detach_dev(BlockDriverState
*bs
, void *dev
)
1742 /* TODO change to DeviceState *dev when all users are qdevified */
1744 assert(bs
->dev
== dev
);
1747 bs
->dev_opaque
= NULL
;
1748 bs
->buffer_alignment
= 512;
1751 /* TODO change to return DeviceState * when all users are qdevified */
1752 void *bdrv_get_attached_dev(BlockDriverState
*bs
)
1757 void bdrv_set_dev_ops(BlockDriverState
*bs
, const BlockDevOps
*ops
,
1761 bs
->dev_opaque
= opaque
;
1764 void bdrv_emit_qmp_error_event(const BlockDriverState
*bdrv
,
1765 enum MonitorEvent ev
,
1766 BlockErrorAction action
, bool is_read
)
1769 const char *action_str
;
1772 case BDRV_ACTION_REPORT
:
1773 action_str
= "report";
1775 case BDRV_ACTION_IGNORE
:
1776 action_str
= "ignore";
1778 case BDRV_ACTION_STOP
:
1779 action_str
= "stop";
1785 data
= qobject_from_jsonf("{ 'device': %s, 'action': %s, 'operation': %s }",
1788 is_read
? "read" : "write");
1789 monitor_protocol_event(ev
, data
);
1791 qobject_decref(data
);
1794 static void bdrv_emit_qmp_eject_event(BlockDriverState
*bs
, bool ejected
)
1798 data
= qobject_from_jsonf("{ 'device': %s, 'tray-open': %i }",
1799 bdrv_get_device_name(bs
), ejected
);
1800 monitor_protocol_event(QEVENT_DEVICE_TRAY_MOVED
, data
);
1802 qobject_decref(data
);
1805 static void bdrv_dev_change_media_cb(BlockDriverState
*bs
, bool load
)
1807 if (bs
->dev_ops
&& bs
->dev_ops
->change_media_cb
) {
1808 bool tray_was_closed
= !bdrv_dev_is_tray_open(bs
);
1809 bs
->dev_ops
->change_media_cb(bs
->dev_opaque
, load
);
1810 if (tray_was_closed
) {
1812 bdrv_emit_qmp_eject_event(bs
, true);
1816 bdrv_emit_qmp_eject_event(bs
, false);
1821 bool bdrv_dev_has_removable_media(BlockDriverState
*bs
)
1823 return !bs
->dev
|| (bs
->dev_ops
&& bs
->dev_ops
->change_media_cb
);
1826 void bdrv_dev_eject_request(BlockDriverState
*bs
, bool force
)
1828 if (bs
->dev_ops
&& bs
->dev_ops
->eject_request_cb
) {
1829 bs
->dev_ops
->eject_request_cb(bs
->dev_opaque
, force
);
1833 bool bdrv_dev_is_tray_open(BlockDriverState
*bs
)
1835 if (bs
->dev_ops
&& bs
->dev_ops
->is_tray_open
) {
1836 return bs
->dev_ops
->is_tray_open(bs
->dev_opaque
);
1841 static void bdrv_dev_resize_cb(BlockDriverState
*bs
)
1843 if (bs
->dev_ops
&& bs
->dev_ops
->resize_cb
) {
1844 bs
->dev_ops
->resize_cb(bs
->dev_opaque
);
1848 bool bdrv_dev_is_medium_locked(BlockDriverState
*bs
)
1850 if (bs
->dev_ops
&& bs
->dev_ops
->is_medium_locked
) {
1851 return bs
->dev_ops
->is_medium_locked(bs
->dev_opaque
);
1857 * Run consistency checks on an image
1859 * Returns 0 if the check could be completed (it doesn't mean that the image is
1860 * free of errors) or -errno when an internal error occurred. The results of the
1861 * check are stored in res.
1863 int bdrv_check(BlockDriverState
*bs
, BdrvCheckResult
*res
, BdrvCheckMode fix
)
1865 if (bs
->drv
->bdrv_check
== NULL
) {
1869 memset(res
, 0, sizeof(*res
));
1870 return bs
->drv
->bdrv_check(bs
, res
, fix
);
1873 #define COMMIT_BUF_SECTORS 2048
1875 /* commit COW file into the raw image */
1876 int bdrv_commit(BlockDriverState
*bs
)
1878 BlockDriver
*drv
= bs
->drv
;
1879 int64_t sector
, total_sectors
;
1880 int n
, ro
, open_flags
;
1883 char filename
[PATH_MAX
];
1888 if (!bs
->backing_hd
) {
1892 if (bdrv_in_use(bs
) || bdrv_in_use(bs
->backing_hd
)) {
1896 ro
= bs
->backing_hd
->read_only
;
1897 /* Use pstrcpy (not strncpy): filename must be NUL-terminated. */
1898 pstrcpy(filename
, sizeof(filename
), bs
->backing_hd
->filename
);
1899 open_flags
= bs
->backing_hd
->open_flags
;
1902 if (bdrv_reopen(bs
->backing_hd
, open_flags
| BDRV_O_RDWR
, NULL
)) {
1907 total_sectors
= bdrv_getlength(bs
) >> BDRV_SECTOR_BITS
;
1908 buf
= g_malloc(COMMIT_BUF_SECTORS
* BDRV_SECTOR_SIZE
);
1910 for (sector
= 0; sector
< total_sectors
; sector
+= n
) {
1911 ret
= bdrv_is_allocated(bs
, sector
, COMMIT_BUF_SECTORS
, &n
);
1916 if (bdrv_read(bs
, sector
, buf
, n
) != 0) {
1921 if (bdrv_write(bs
->backing_hd
, sector
, buf
, n
) != 0) {
1928 if (drv
->bdrv_make_empty
) {
1929 ret
= drv
->bdrv_make_empty(bs
);
1934 * Make sure all data we wrote to the backing device is actually
1938 bdrv_flush(bs
->backing_hd
);
1944 /* ignoring error return here */
1945 bdrv_reopen(bs
->backing_hd
, open_flags
& ~BDRV_O_RDWR
, NULL
);
1951 int bdrv_commit_all(void)
1953 BlockDriverState
*bs
;
1955 QTAILQ_FOREACH(bs
, &bdrv_states
, list
) {
1956 if (bs
->drv
&& bs
->backing_hd
) {
1957 int ret
= bdrv_commit(bs
);
1967 * Remove an active request from the tracked requests list
1969 * This function should be called when a tracked request is completing.
1971 static void tracked_request_end(BdrvTrackedRequest
*req
)
1973 QLIST_REMOVE(req
, list
);
1974 qemu_co_queue_restart_all(&req
->wait_queue
);
1978 * Add an active request to the tracked requests list
1980 static void tracked_request_begin(BdrvTrackedRequest
*req
,
1981 BlockDriverState
*bs
,
1983 int nb_sectors
, bool is_write
)
1985 *req
= (BdrvTrackedRequest
){
1987 .sector_num
= sector_num
,
1988 .nb_sectors
= nb_sectors
,
1989 .is_write
= is_write
,
1990 .co
= qemu_coroutine_self(),
1993 qemu_co_queue_init(&req
->wait_queue
);
1995 QLIST_INSERT_HEAD(&bs
->tracked_requests
, req
, list
);
1999 * Round a region to cluster boundaries
2001 void bdrv_round_to_clusters(BlockDriverState
*bs
,
2002 int64_t sector_num
, int nb_sectors
,
2003 int64_t *cluster_sector_num
,
2004 int *cluster_nb_sectors
)
2006 BlockDriverInfo bdi
;
2008 if (bdrv_get_info(bs
, &bdi
) < 0 || bdi
.cluster_size
== 0) {
2009 *cluster_sector_num
= sector_num
;
2010 *cluster_nb_sectors
= nb_sectors
;
2012 int64_t c
= bdi
.cluster_size
/ BDRV_SECTOR_SIZE
;
2013 *cluster_sector_num
= QEMU_ALIGN_DOWN(sector_num
, c
);
2014 *cluster_nb_sectors
= QEMU_ALIGN_UP(sector_num
- *cluster_sector_num
+
2019 static bool tracked_request_overlaps(BdrvTrackedRequest
*req
,
2020 int64_t sector_num
, int nb_sectors
) {
2022 if (sector_num
>= req
->sector_num
+ req
->nb_sectors
) {
2026 if (req
->sector_num
>= sector_num
+ nb_sectors
) {
2032 static void coroutine_fn
wait_for_overlapping_requests(BlockDriverState
*bs
,
2033 int64_t sector_num
, int nb_sectors
)
2035 BdrvTrackedRequest
*req
;
2036 int64_t cluster_sector_num
;
2037 int cluster_nb_sectors
;
2040 /* If we touch the same cluster it counts as an overlap. This guarantees
2041 * that allocating writes will be serialized and not race with each other
2042 * for the same cluster. For example, in copy-on-read it ensures that the
2043 * CoR read and write operations are atomic and guest writes cannot
2044 * interleave between them.
2046 bdrv_round_to_clusters(bs
, sector_num
, nb_sectors
,
2047 &cluster_sector_num
, &cluster_nb_sectors
);
2051 QLIST_FOREACH(req
, &bs
->tracked_requests
, list
) {
2052 if (tracked_request_overlaps(req
, cluster_sector_num
,
2053 cluster_nb_sectors
)) {
2054 /* Hitting this means there was a reentrant request, for
2055 * example, a block driver issuing nested requests. This must
2056 * never happen since it means deadlock.
2058 assert(qemu_coroutine_self() != req
->co
);
2060 qemu_co_queue_wait(&req
->wait_queue
);
2071 * -EINVAL - backing format specified, but no file
2072 * -ENOSPC - can't update the backing file because no space is left in the
2074 * -ENOTSUP - format driver doesn't support changing the backing file
2076 int bdrv_change_backing_file(BlockDriverState
*bs
,
2077 const char *backing_file
, const char *backing_fmt
)
2079 BlockDriver
*drv
= bs
->drv
;
2082 /* Backing file format doesn't make sense without a backing file */
2083 if (backing_fmt
&& !backing_file
) {
2087 if (drv
->bdrv_change_backing_file
!= NULL
) {
2088 ret
= drv
->bdrv_change_backing_file(bs
, backing_file
, backing_fmt
);
2094 pstrcpy(bs
->backing_file
, sizeof(bs
->backing_file
), backing_file
?: "");
2095 pstrcpy(bs
->backing_format
, sizeof(bs
->backing_format
), backing_fmt
?: "");
2101 * Finds the image layer in the chain that has 'bs' as its backing file.
2103 * active is the current topmost image.
2105 * Returns NULL if bs is not found in active's image chain,
2106 * or if active == bs.
2108 BlockDriverState
*bdrv_find_overlay(BlockDriverState
*active
,
2109 BlockDriverState
*bs
)
2111 BlockDriverState
*overlay
= NULL
;
2112 BlockDriverState
*intermediate
;
2114 assert(active
!= NULL
);
2117 /* if bs is the same as active, then by definition it has no overlay
2123 intermediate
= active
;
2124 while (intermediate
->backing_hd
) {
2125 if (intermediate
->backing_hd
== bs
) {
2126 overlay
= intermediate
;
2129 intermediate
= intermediate
->backing_hd
;
2135 typedef struct BlkIntermediateStates
{
2136 BlockDriverState
*bs
;
2137 QSIMPLEQ_ENTRY(BlkIntermediateStates
) entry
;
2138 } BlkIntermediateStates
;
2142 * Drops images above 'base' up to and including 'top', and sets the image
2143 * above 'top' to have base as its backing file.
2145 * Requires that the overlay to 'top' is opened r/w, so that the backing file
2146 * information in 'bs' can be properly updated.
2148 * E.g., this will convert the following chain:
2149 * bottom <- base <- intermediate <- top <- active
2153 * bottom <- base <- active
2155 * It is allowed for bottom==base, in which case it converts:
2157 * base <- intermediate <- top <- active
2164 * if active == top, that is considered an error
2167 int bdrv_drop_intermediate(BlockDriverState
*active
, BlockDriverState
*top
,
2168 BlockDriverState
*base
)
2170 BlockDriverState
*intermediate
;
2171 BlockDriverState
*base_bs
= NULL
;
2172 BlockDriverState
*new_top_bs
= NULL
;
2173 BlkIntermediateStates
*intermediate_state
, *next
;
2176 QSIMPLEQ_HEAD(states_to_delete
, BlkIntermediateStates
) states_to_delete
;
2177 QSIMPLEQ_INIT(&states_to_delete
);
2179 if (!top
->drv
|| !base
->drv
) {
2183 new_top_bs
= bdrv_find_overlay(active
, top
);
2185 if (new_top_bs
== NULL
) {
2186 /* we could not find the image above 'top', this is an error */
2190 /* special case of new_top_bs->backing_hd already pointing to base - nothing
2191 * to do, no intermediate images */
2192 if (new_top_bs
->backing_hd
== base
) {
2199 /* now we will go down through the list, and add each BDS we find
2200 * into our deletion queue, until we hit the 'base'
2202 while (intermediate
) {
2203 intermediate_state
= g_malloc0(sizeof(BlkIntermediateStates
));
2204 intermediate_state
->bs
= intermediate
;
2205 QSIMPLEQ_INSERT_TAIL(&states_to_delete
, intermediate_state
, entry
);
2207 if (intermediate
->backing_hd
== base
) {
2208 base_bs
= intermediate
->backing_hd
;
2211 intermediate
= intermediate
->backing_hd
;
2213 if (base_bs
== NULL
) {
2214 /* something went wrong, we did not end at the base. safely
2215 * unravel everything, and exit with error */
2219 /* success - we can delete the intermediate states, and link top->base */
2220 ret
= bdrv_change_backing_file(new_top_bs
, base_bs
->filename
,
2221 base_bs
->drv
? base_bs
->drv
->format_name
: "");
2225 new_top_bs
->backing_hd
= base_bs
;
2228 QSIMPLEQ_FOREACH_SAFE(intermediate_state
, &states_to_delete
, entry
, next
) {
2229 /* so that bdrv_close() does not recursively close the chain */
2230 intermediate_state
->bs
->backing_hd
= NULL
;
2231 bdrv_unref(intermediate_state
->bs
);
2236 QSIMPLEQ_FOREACH_SAFE(intermediate_state
, &states_to_delete
, entry
, next
) {
2237 g_free(intermediate_state
);
2243 static int bdrv_check_byte_request(BlockDriverState
*bs
, int64_t offset
,
2248 if (!bdrv_is_inserted(bs
))
2254 len
= bdrv_getlength(bs
);
2259 if ((offset
> len
) || (len
- offset
< size
))
2265 static int bdrv_check_request(BlockDriverState
*bs
, int64_t sector_num
,
2268 return bdrv_check_byte_request(bs
, sector_num
* BDRV_SECTOR_SIZE
,
2269 nb_sectors
* BDRV_SECTOR_SIZE
);
2272 typedef struct RwCo
{
2273 BlockDriverState
*bs
;
2279 BdrvRequestFlags flags
;
2282 static void coroutine_fn
bdrv_rw_co_entry(void *opaque
)
2284 RwCo
*rwco
= opaque
;
2286 if (!rwco
->is_write
) {
2287 rwco
->ret
= bdrv_co_do_readv(rwco
->bs
, rwco
->sector_num
,
2288 rwco
->nb_sectors
, rwco
->qiov
,
2291 rwco
->ret
= bdrv_co_do_writev(rwco
->bs
, rwco
->sector_num
,
2292 rwco
->nb_sectors
, rwco
->qiov
,
2298 * Process a vectored synchronous request using coroutines
2300 static int bdrv_rwv_co(BlockDriverState
*bs
, int64_t sector_num
,
2301 QEMUIOVector
*qiov
, bool is_write
,
2302 BdrvRequestFlags flags
)
2307 .sector_num
= sector_num
,
2308 .nb_sectors
= qiov
->size
>> BDRV_SECTOR_BITS
,
2310 .is_write
= is_write
,
2314 assert((qiov
->size
& (BDRV_SECTOR_SIZE
- 1)) == 0);
2317 * In sync call context, when the vcpu is blocked, this throttling timer
2318 * will not fire; so the I/O throttling function has to be disabled here
2319 * if it has been enabled.
2321 if (bs
->io_limits_enabled
) {
2322 fprintf(stderr
, "Disabling I/O throttling on '%s' due "
2323 "to synchronous I/O.\n", bdrv_get_device_name(bs
));
2324 bdrv_io_limits_disable(bs
);
2327 if (qemu_in_coroutine()) {
2328 /* Fast-path if already in coroutine context */
2329 bdrv_rw_co_entry(&rwco
);
2331 co
= qemu_coroutine_create(bdrv_rw_co_entry
);
2332 qemu_coroutine_enter(co
, &rwco
);
2333 while (rwco
.ret
== NOT_DONE
) {
2341 * Process a synchronous request using coroutines
2343 static int bdrv_rw_co(BlockDriverState
*bs
, int64_t sector_num
, uint8_t *buf
,
2344 int nb_sectors
, bool is_write
, BdrvRequestFlags flags
)
2347 struct iovec iov
= {
2348 .iov_base
= (void *)buf
,
2349 .iov_len
= nb_sectors
* BDRV_SECTOR_SIZE
,
2352 qemu_iovec_init_external(&qiov
, &iov
, 1);
2353 return bdrv_rwv_co(bs
, sector_num
, &qiov
, is_write
, flags
);
2356 /* return < 0 if error. See bdrv_write() for the return codes */
2357 int bdrv_read(BlockDriverState
*bs
, int64_t sector_num
,
2358 uint8_t *buf
, int nb_sectors
)
2360 return bdrv_rw_co(bs
, sector_num
, buf
, nb_sectors
, false, 0);
2363 /* Just like bdrv_read(), but with I/O throttling temporarily disabled */
2364 int bdrv_read_unthrottled(BlockDriverState
*bs
, int64_t sector_num
,
2365 uint8_t *buf
, int nb_sectors
)
2370 enabled
= bs
->io_limits_enabled
;
2371 bs
->io_limits_enabled
= false;
2372 ret
= bdrv_read(bs
, sector_num
, buf
, nb_sectors
);
2373 bs
->io_limits_enabled
= enabled
;
2377 /* Return < 0 if error. Important errors are:
2378 -EIO generic I/O error (may happen for all errors)
2379 -ENOMEDIUM No media inserted.
2380 -EINVAL Invalid sector number or nb_sectors
2381 -EACCES Trying to write a read-only device
2383 int bdrv_write(BlockDriverState
*bs
, int64_t sector_num
,
2384 const uint8_t *buf
, int nb_sectors
)
2386 return bdrv_rw_co(bs
, sector_num
, (uint8_t *)buf
, nb_sectors
, true, 0);
2389 int bdrv_writev(BlockDriverState
*bs
, int64_t sector_num
, QEMUIOVector
*qiov
)
2391 return bdrv_rwv_co(bs
, sector_num
, qiov
, true, 0);
2394 int bdrv_write_zeroes(BlockDriverState
*bs
, int64_t sector_num
,
2395 int nb_sectors
, BdrvRequestFlags flags
)
2397 return bdrv_rw_co(bs
, sector_num
, NULL
, nb_sectors
, true,
2398 BDRV_REQ_ZERO_WRITE
| flags
);
2402 * Completely zero out a block device with the help of bdrv_write_zeroes.
2403 * The operation is sped up by checking the block status and only writing
2404 * zeroes to the device if they currently do not return zeroes. Optional
2405 * flags are passed through to bdrv_write_zeroes (e.g. BDRV_REQ_MAY_UNMAP).
2407 * Returns < 0 on error, 0 on success. For error codes see bdrv_write().
2409 int bdrv_make_zero(BlockDriverState
*bs
, BdrvRequestFlags flags
)
2411 int64_t target_size
= bdrv_getlength(bs
) / BDRV_SECTOR_SIZE
;
2412 int64_t ret
, nb_sectors
, sector_num
= 0;
2416 nb_sectors
= target_size
- sector_num
;
2417 if (nb_sectors
<= 0) {
2420 if (nb_sectors
> INT_MAX
) {
2421 nb_sectors
= INT_MAX
;
2423 ret
= bdrv_get_block_status(bs
, sector_num
, nb_sectors
, &n
);
2424 if (ret
& BDRV_BLOCK_ZERO
) {
2428 ret
= bdrv_write_zeroes(bs
, sector_num
, n
, flags
);
2430 error_report("error writing zeroes at sector %" PRId64
": %s",
2431 sector_num
, strerror(-ret
));
2438 int bdrv_pread(BlockDriverState
*bs
, int64_t offset
,
2439 void *buf
, int count1
)
2441 uint8_t tmp_buf
[BDRV_SECTOR_SIZE
];
2442 int len
, nb_sectors
, count
;
2447 /* first read to align to sector start */
2448 len
= (BDRV_SECTOR_SIZE
- offset
) & (BDRV_SECTOR_SIZE
- 1);
2451 sector_num
= offset
>> BDRV_SECTOR_BITS
;
2453 if ((ret
= bdrv_read(bs
, sector_num
, tmp_buf
, 1)) < 0)
2455 memcpy(buf
, tmp_buf
+ (offset
& (BDRV_SECTOR_SIZE
- 1)), len
);
2463 /* read the sectors "in place" */
2464 nb_sectors
= count
>> BDRV_SECTOR_BITS
;
2465 if (nb_sectors
> 0) {
2466 if ((ret
= bdrv_read(bs
, sector_num
, buf
, nb_sectors
)) < 0)
2468 sector_num
+= nb_sectors
;
2469 len
= nb_sectors
<< BDRV_SECTOR_BITS
;
2474 /* add data from the last sector */
2476 if ((ret
= bdrv_read(bs
, sector_num
, tmp_buf
, 1)) < 0)
2478 memcpy(buf
, tmp_buf
, count
);
2483 int bdrv_pwritev(BlockDriverState
*bs
, int64_t offset
, QEMUIOVector
*qiov
)
2485 uint8_t tmp_buf
[BDRV_SECTOR_SIZE
];
2486 int len
, nb_sectors
, count
;
2492 /* first write to align to sector start */
2493 len
= (BDRV_SECTOR_SIZE
- offset
) & (BDRV_SECTOR_SIZE
- 1);
2496 sector_num
= offset
>> BDRV_SECTOR_BITS
;
2498 if ((ret
= bdrv_read(bs
, sector_num
, tmp_buf
, 1)) < 0)
2500 qemu_iovec_to_buf(qiov
, 0, tmp_buf
+ (offset
& (BDRV_SECTOR_SIZE
- 1)),
2502 if ((ret
= bdrv_write(bs
, sector_num
, tmp_buf
, 1)) < 0)
2510 /* write the sectors "in place" */
2511 nb_sectors
= count
>> BDRV_SECTOR_BITS
;
2512 if (nb_sectors
> 0) {
2513 QEMUIOVector qiov_inplace
;
2515 qemu_iovec_init(&qiov_inplace
, qiov
->niov
);
2516 qemu_iovec_concat(&qiov_inplace
, qiov
, len
,
2517 nb_sectors
<< BDRV_SECTOR_BITS
);
2518 ret
= bdrv_writev(bs
, sector_num
, &qiov_inplace
);
2519 qemu_iovec_destroy(&qiov_inplace
);
2524 sector_num
+= nb_sectors
;
2525 len
= nb_sectors
<< BDRV_SECTOR_BITS
;
2529 /* add data from the last sector */
2531 if ((ret
= bdrv_read(bs
, sector_num
, tmp_buf
, 1)) < 0)
2533 qemu_iovec_to_buf(qiov
, qiov
->size
- count
, tmp_buf
, count
);
2534 if ((ret
= bdrv_write(bs
, sector_num
, tmp_buf
, 1)) < 0)
2540 int bdrv_pwrite(BlockDriverState
*bs
, int64_t offset
,
2541 const void *buf
, int count1
)
2544 struct iovec iov
= {
2545 .iov_base
= (void *) buf
,
2549 qemu_iovec_init_external(&qiov
, &iov
, 1);
2550 return bdrv_pwritev(bs
, offset
, &qiov
);
2554 * Writes to the file and ensures that no writes are reordered across this
2555 * request (acts as a barrier)
2557 * Returns 0 on success, -errno in error cases.
2559 int bdrv_pwrite_sync(BlockDriverState
*bs
, int64_t offset
,
2560 const void *buf
, int count
)
2564 ret
= bdrv_pwrite(bs
, offset
, buf
, count
);
2569 /* No flush needed for cache modes that already do it */
2570 if (bs
->enable_write_cache
) {
2577 static int coroutine_fn
bdrv_co_do_copy_on_readv(BlockDriverState
*bs
,
2578 int64_t sector_num
, int nb_sectors
, QEMUIOVector
*qiov
)
2580 /* Perform I/O through a temporary buffer so that users who scribble over
2581 * their read buffer while the operation is in progress do not end up
2582 * modifying the image file. This is critical for zero-copy guest I/O
2583 * where anything might happen inside guest memory.
2585 void *bounce_buffer
;
2587 BlockDriver
*drv
= bs
->drv
;
2589 QEMUIOVector bounce_qiov
;
2590 int64_t cluster_sector_num
;
2591 int cluster_nb_sectors
;
2595 /* Cover entire cluster so no additional backing file I/O is required when
2596 * allocating cluster in the image file.
2598 bdrv_round_to_clusters(bs
, sector_num
, nb_sectors
,
2599 &cluster_sector_num
, &cluster_nb_sectors
);
2601 trace_bdrv_co_do_copy_on_readv(bs
, sector_num
, nb_sectors
,
2602 cluster_sector_num
, cluster_nb_sectors
);
2604 iov
.iov_len
= cluster_nb_sectors
* BDRV_SECTOR_SIZE
;
2605 iov
.iov_base
= bounce_buffer
= qemu_blockalign(bs
, iov
.iov_len
);
2606 qemu_iovec_init_external(&bounce_qiov
, &iov
, 1);
2608 ret
= drv
->bdrv_co_readv(bs
, cluster_sector_num
, cluster_nb_sectors
,
2614 if (drv
->bdrv_co_write_zeroes
&&
2615 buffer_is_zero(bounce_buffer
, iov
.iov_len
)) {
2616 ret
= bdrv_co_do_write_zeroes(bs
, cluster_sector_num
,
2617 cluster_nb_sectors
, 0);
2619 /* This does not change the data on the disk, it is not necessary
2620 * to flush even in cache=writethrough mode.
2622 ret
= drv
->bdrv_co_writev(bs
, cluster_sector_num
, cluster_nb_sectors
,
2627 /* It might be okay to ignore write errors for guest requests. If this
2628 * is a deliberate copy-on-read then we don't want to ignore the error.
2629 * Simply report it in all cases.
2634 skip_bytes
= (sector_num
- cluster_sector_num
) * BDRV_SECTOR_SIZE
;
2635 qemu_iovec_from_buf(qiov
, 0, bounce_buffer
+ skip_bytes
,
2636 nb_sectors
* BDRV_SECTOR_SIZE
);
2639 qemu_vfree(bounce_buffer
);
2644 * Handle a read request in coroutine context
2646 static int coroutine_fn
bdrv_co_do_readv(BlockDriverState
*bs
,
2647 int64_t sector_num
, int nb_sectors
, QEMUIOVector
*qiov
,
2648 BdrvRequestFlags flags
)
2650 BlockDriver
*drv
= bs
->drv
;
2651 BdrvTrackedRequest req
;
2657 if (bdrv_check_request(bs
, sector_num
, nb_sectors
)) {
2661 if (bs
->copy_on_read
) {
2662 flags
|= BDRV_REQ_COPY_ON_READ
;
2664 if (flags
& BDRV_REQ_COPY_ON_READ
) {
2665 bs
->copy_on_read_in_flight
++;
2668 if (bs
->copy_on_read_in_flight
) {
2669 wait_for_overlapping_requests(bs
, sector_num
, nb_sectors
);
2672 /* throttling disk I/O */
2673 if (bs
->io_limits_enabled
) {
2674 bdrv_io_limits_intercept(bs
, nb_sectors
, false);
2677 tracked_request_begin(&req
, bs
, sector_num
, nb_sectors
, false);
2679 if (flags
& BDRV_REQ_COPY_ON_READ
) {
2682 ret
= bdrv_is_allocated(bs
, sector_num
, nb_sectors
, &pnum
);
2687 if (!ret
|| pnum
!= nb_sectors
) {
2688 ret
= bdrv_co_do_copy_on_readv(bs
, sector_num
, nb_sectors
, qiov
);
2693 if (!(bs
->zero_beyond_eof
&& bs
->growable
)) {
2694 ret
= drv
->bdrv_co_readv(bs
, sector_num
, nb_sectors
, qiov
);
2696 /* Read zeros after EOF of growable BDSes */
2697 int64_t len
, total_sectors
, max_nb_sectors
;
2699 len
= bdrv_getlength(bs
);
2705 total_sectors
= DIV_ROUND_UP(len
, BDRV_SECTOR_SIZE
);
2706 max_nb_sectors
= MAX(0, total_sectors
- sector_num
);
2707 if (max_nb_sectors
> 0) {
2708 ret
= drv
->bdrv_co_readv(bs
, sector_num
,
2709 MIN(nb_sectors
, max_nb_sectors
), qiov
);
2714 /* Reading beyond end of file is supposed to produce zeroes */
2715 if (ret
== 0 && total_sectors
< sector_num
+ nb_sectors
) {
2716 uint64_t offset
= MAX(0, total_sectors
- sector_num
);
2717 uint64_t bytes
= (sector_num
+ nb_sectors
- offset
) *
2719 qemu_iovec_memset(qiov
, offset
* BDRV_SECTOR_SIZE
, 0, bytes
);
2724 tracked_request_end(&req
);
2726 if (flags
& BDRV_REQ_COPY_ON_READ
) {
2727 bs
->copy_on_read_in_flight
--;
2733 int coroutine_fn
bdrv_co_readv(BlockDriverState
*bs
, int64_t sector_num
,
2734 int nb_sectors
, QEMUIOVector
*qiov
)
2736 trace_bdrv_co_readv(bs
, sector_num
, nb_sectors
);
2738 return bdrv_co_do_readv(bs
, sector_num
, nb_sectors
, qiov
, 0);
2741 int coroutine_fn
bdrv_co_copy_on_readv(BlockDriverState
*bs
,
2742 int64_t sector_num
, int nb_sectors
, QEMUIOVector
*qiov
)
2744 trace_bdrv_co_copy_on_readv(bs
, sector_num
, nb_sectors
);
2746 return bdrv_co_do_readv(bs
, sector_num
, nb_sectors
, qiov
,
2747 BDRV_REQ_COPY_ON_READ
);
2750 /* if no limit is specified in the BlockLimits use a default
2751 * of 32768 512-byte sectors (16 MiB) per request.
2753 #define MAX_WRITE_ZEROES_DEFAULT 32768
2755 static int coroutine_fn
bdrv_co_do_write_zeroes(BlockDriverState
*bs
,
2756 int64_t sector_num
, int nb_sectors
, BdrvRequestFlags flags
)
2758 BlockDriver
*drv
= bs
->drv
;
2760 struct iovec iov
= {0};
2763 int max_write_zeroes
= bs
->bl
.max_write_zeroes
?
2764 bs
->bl
.max_write_zeroes
: MAX_WRITE_ZEROES_DEFAULT
;
2766 while (nb_sectors
> 0 && !ret
) {
2767 int num
= nb_sectors
;
2769 /* Align request. Block drivers can expect the "bulk" of the request
2772 if (bs
->bl
.write_zeroes_alignment
2773 && num
> bs
->bl
.write_zeroes_alignment
) {
2774 if (sector_num
% bs
->bl
.write_zeroes_alignment
!= 0) {
2775 /* Make a small request up to the first aligned sector. */
2776 num
= bs
->bl
.write_zeroes_alignment
;
2777 num
-= sector_num
% bs
->bl
.write_zeroes_alignment
;
2778 } else if ((sector_num
+ num
) % bs
->bl
.write_zeroes_alignment
!= 0) {
2779 /* Shorten the request to the last aligned sector. num cannot
2780 * underflow because num > bs->bl.write_zeroes_alignment.
2782 num
-= (sector_num
+ num
) % bs
->bl
.write_zeroes_alignment
;
2786 /* limit request size */
2787 if (num
> max_write_zeroes
) {
2788 num
= max_write_zeroes
;
2792 /* First try the efficient write zeroes operation */
2793 if (drv
->bdrv_co_write_zeroes
) {
2794 ret
= drv
->bdrv_co_write_zeroes(bs
, sector_num
, num
, flags
);
2797 if (ret
== -ENOTSUP
) {
2798 /* Fall back to bounce buffer if write zeroes is unsupported */
2799 iov
.iov_len
= num
* BDRV_SECTOR_SIZE
;
2800 if (iov
.iov_base
== NULL
) {
2801 iov
.iov_base
= qemu_blockalign(bs
, num
* BDRV_SECTOR_SIZE
);
2802 memset(iov
.iov_base
, 0, num
* BDRV_SECTOR_SIZE
);
2804 qemu_iovec_init_external(&qiov
, &iov
, 1);
2806 ret
= drv
->bdrv_co_writev(bs
, sector_num
, num
, &qiov
);
2808 /* Keep bounce buffer around if it is big enough for all
2809 * all future requests.
2811 if (num
< max_write_zeroes
) {
2812 qemu_vfree(iov
.iov_base
);
2813 iov
.iov_base
= NULL
;
2821 qemu_vfree(iov
.iov_base
);
2826 * Handle a write request in coroutine context
2828 static int coroutine_fn
bdrv_co_do_writev(BlockDriverState
*bs
,
2829 int64_t sector_num
, int nb_sectors
, QEMUIOVector
*qiov
,
2830 BdrvRequestFlags flags
)
2832 BlockDriver
*drv
= bs
->drv
;
2833 BdrvTrackedRequest req
;
2839 if (bs
->read_only
) {
2842 if (bdrv_check_request(bs
, sector_num
, nb_sectors
)) {
2846 if (bs
->copy_on_read_in_flight
) {
2847 wait_for_overlapping_requests(bs
, sector_num
, nb_sectors
);
2850 /* throttling disk I/O */
2851 if (bs
->io_limits_enabled
) {
2852 bdrv_io_limits_intercept(bs
, nb_sectors
, true);
2855 tracked_request_begin(&req
, bs
, sector_num
, nb_sectors
, true);
2857 ret
= notifier_with_return_list_notify(&bs
->before_write_notifiers
, &req
);
2860 /* Do nothing, write notifier decided to fail this request */
2861 } else if (flags
& BDRV_REQ_ZERO_WRITE
) {
2862 ret
= bdrv_co_do_write_zeroes(bs
, sector_num
, nb_sectors
, flags
);
2864 ret
= drv
->bdrv_co_writev(bs
, sector_num
, nb_sectors
, qiov
);
2867 if (ret
== 0 && !bs
->enable_write_cache
) {
2868 ret
= bdrv_co_flush(bs
);
2871 bdrv_set_dirty(bs
, sector_num
, nb_sectors
);
2873 if (bs
->wr_highest_sector
< sector_num
+ nb_sectors
- 1) {
2874 bs
->wr_highest_sector
= sector_num
+ nb_sectors
- 1;
2876 if (bs
->growable
&& ret
>= 0) {
2877 bs
->total_sectors
= MAX(bs
->total_sectors
, sector_num
+ nb_sectors
);
2880 tracked_request_end(&req
);
2885 int coroutine_fn
bdrv_co_writev(BlockDriverState
*bs
, int64_t sector_num
,
2886 int nb_sectors
, QEMUIOVector
*qiov
)
2888 trace_bdrv_co_writev(bs
, sector_num
, nb_sectors
);
2890 return bdrv_co_do_writev(bs
, sector_num
, nb_sectors
, qiov
, 0);
2893 int coroutine_fn
bdrv_co_write_zeroes(BlockDriverState
*bs
,
2894 int64_t sector_num
, int nb_sectors
,
2895 BdrvRequestFlags flags
)
2897 trace_bdrv_co_write_zeroes(bs
, sector_num
, nb_sectors
, flags
);
2899 if (!(bs
->open_flags
& BDRV_O_UNMAP
)) {
2900 flags
&= ~BDRV_REQ_MAY_UNMAP
;
2903 return bdrv_co_do_writev(bs
, sector_num
, nb_sectors
, NULL
,
2904 BDRV_REQ_ZERO_WRITE
| flags
);
2908 * Truncate file to 'offset' bytes (needed only for file protocols)
2910 int bdrv_truncate(BlockDriverState
*bs
, int64_t offset
)
2912 BlockDriver
*drv
= bs
->drv
;
2916 if (!drv
->bdrv_truncate
)
2920 if (bdrv_in_use(bs
))
2922 ret
= drv
->bdrv_truncate(bs
, offset
);
2924 ret
= refresh_total_sectors(bs
, offset
>> BDRV_SECTOR_BITS
);
2925 bdrv_dev_resize_cb(bs
);
2931 * Length of a allocated file in bytes. Sparse files are counted by actual
2932 * allocated space. Return < 0 if error or unknown.
2934 int64_t bdrv_get_allocated_file_size(BlockDriverState
*bs
)
2936 BlockDriver
*drv
= bs
->drv
;
2940 if (drv
->bdrv_get_allocated_file_size
) {
2941 return drv
->bdrv_get_allocated_file_size(bs
);
2944 return bdrv_get_allocated_file_size(bs
->file
);
2950 * Length of a file in bytes. Return < 0 if error or unknown.
2952 int64_t bdrv_getlength(BlockDriverState
*bs
)
2954 BlockDriver
*drv
= bs
->drv
;
2958 if (drv
->has_variable_length
) {
2959 int ret
= refresh_total_sectors(bs
, bs
->total_sectors
);
2964 return bs
->total_sectors
* BDRV_SECTOR_SIZE
;
2967 /* return 0 as number of sectors if no device present or error */
2968 void bdrv_get_geometry(BlockDriverState
*bs
, uint64_t *nb_sectors_ptr
)
2971 length
= bdrv_getlength(bs
);
2975 length
= length
>> BDRV_SECTOR_BITS
;
2976 *nb_sectors_ptr
= length
;
2979 void bdrv_set_on_error(BlockDriverState
*bs
, BlockdevOnError on_read_error
,
2980 BlockdevOnError on_write_error
)
2982 bs
->on_read_error
= on_read_error
;
2983 bs
->on_write_error
= on_write_error
;
2986 BlockdevOnError
bdrv_get_on_error(BlockDriverState
*bs
, bool is_read
)
2988 return is_read
? bs
->on_read_error
: bs
->on_write_error
;
2991 BlockErrorAction
bdrv_get_error_action(BlockDriverState
*bs
, bool is_read
, int error
)
2993 BlockdevOnError on_err
= is_read
? bs
->on_read_error
: bs
->on_write_error
;
2996 case BLOCKDEV_ON_ERROR_ENOSPC
:
2997 return (error
== ENOSPC
) ? BDRV_ACTION_STOP
: BDRV_ACTION_REPORT
;
2998 case BLOCKDEV_ON_ERROR_STOP
:
2999 return BDRV_ACTION_STOP
;
3000 case BLOCKDEV_ON_ERROR_REPORT
:
3001 return BDRV_ACTION_REPORT
;
3002 case BLOCKDEV_ON_ERROR_IGNORE
:
3003 return BDRV_ACTION_IGNORE
;
3009 /* This is done by device models because, while the block layer knows
3010 * about the error, it does not know whether an operation comes from
3011 * the device or the block layer (from a job, for example).
3013 void bdrv_error_action(BlockDriverState
*bs
, BlockErrorAction action
,
3014 bool is_read
, int error
)
3017 bdrv_emit_qmp_error_event(bs
, QEVENT_BLOCK_IO_ERROR
, action
, is_read
);
3018 if (action
== BDRV_ACTION_STOP
) {
3019 vm_stop(RUN_STATE_IO_ERROR
);
3020 bdrv_iostatus_set_err(bs
, error
);
3024 int bdrv_is_read_only(BlockDriverState
*bs
)
3026 return bs
->read_only
;
3029 int bdrv_is_sg(BlockDriverState
*bs
)
3034 int bdrv_enable_write_cache(BlockDriverState
*bs
)
3036 return bs
->enable_write_cache
;
3039 void bdrv_set_enable_write_cache(BlockDriverState
*bs
, bool wce
)
3041 bs
->enable_write_cache
= wce
;
3043 /* so a reopen() will preserve wce */
3045 bs
->open_flags
|= BDRV_O_CACHE_WB
;
3047 bs
->open_flags
&= ~BDRV_O_CACHE_WB
;
3051 int bdrv_is_encrypted(BlockDriverState
*bs
)
3053 if (bs
->backing_hd
&& bs
->backing_hd
->encrypted
)
3055 return bs
->encrypted
;
3058 int bdrv_key_required(BlockDriverState
*bs
)
3060 BlockDriverState
*backing_hd
= bs
->backing_hd
;
3062 if (backing_hd
&& backing_hd
->encrypted
&& !backing_hd
->valid_key
)
3064 return (bs
->encrypted
&& !bs
->valid_key
);
3067 int bdrv_set_key(BlockDriverState
*bs
, const char *key
)
3070 if (bs
->backing_hd
&& bs
->backing_hd
->encrypted
) {
3071 ret
= bdrv_set_key(bs
->backing_hd
, key
);
3077 if (!bs
->encrypted
) {
3079 } else if (!bs
->drv
|| !bs
->drv
->bdrv_set_key
) {
3082 ret
= bs
->drv
->bdrv_set_key(bs
, key
);
3085 } else if (!bs
->valid_key
) {
3087 /* call the change callback now, we skipped it on open */
3088 bdrv_dev_change_media_cb(bs
, true);
3093 const char *bdrv_get_format_name(BlockDriverState
*bs
)
3095 return bs
->drv
? bs
->drv
->format_name
: NULL
;
3098 void bdrv_iterate_format(void (*it
)(void *opaque
, const char *name
),
3103 QLIST_FOREACH(drv
, &bdrv_drivers
, list
) {
3104 it(opaque
, drv
->format_name
);
3108 BlockDriverState
*bdrv_find(const char *name
)
3110 BlockDriverState
*bs
;
3112 QTAILQ_FOREACH(bs
, &bdrv_states
, list
) {
3113 if (!strcmp(name
, bs
->device_name
)) {
3120 BlockDriverState
*bdrv_next(BlockDriverState
*bs
)
3123 return QTAILQ_FIRST(&bdrv_states
);
3125 return QTAILQ_NEXT(bs
, list
);
3128 void bdrv_iterate(void (*it
)(void *opaque
, BlockDriverState
*bs
), void *opaque
)
3130 BlockDriverState
*bs
;
3132 QTAILQ_FOREACH(bs
, &bdrv_states
, list
) {
3137 const char *bdrv_get_device_name(BlockDriverState
*bs
)
3139 return bs
->device_name
;
3142 int bdrv_get_flags(BlockDriverState
*bs
)
3144 return bs
->open_flags
;
3147 int bdrv_flush_all(void)
3149 BlockDriverState
*bs
;
3152 QTAILQ_FOREACH(bs
, &bdrv_states
, list
) {
3153 int ret
= bdrv_flush(bs
);
3154 if (ret
< 0 && !result
) {
3162 int bdrv_has_zero_init_1(BlockDriverState
*bs
)
3167 int bdrv_has_zero_init(BlockDriverState
*bs
)
3171 /* If BS is a copy on write image, it is initialized to
3172 the contents of the base image, which may not be zeroes. */
3173 if (bs
->backing_hd
) {
3176 if (bs
->drv
->bdrv_has_zero_init
) {
3177 return bs
->drv
->bdrv_has_zero_init(bs
);
3184 bool bdrv_unallocated_blocks_are_zero(BlockDriverState
*bs
)
3186 BlockDriverInfo bdi
;
3188 if (bs
->backing_hd
) {
3192 if (bdrv_get_info(bs
, &bdi
) == 0) {
3193 return bdi
.unallocated_blocks_are_zero
;
3199 bool bdrv_can_write_zeroes_with_unmap(BlockDriverState
*bs
)
3201 BlockDriverInfo bdi
;
3203 if (bs
->backing_hd
|| !(bs
->open_flags
& BDRV_O_UNMAP
)) {
3207 if (bdrv_get_info(bs
, &bdi
) == 0) {
3208 return bdi
.can_write_zeroes_with_unmap
;
3214 typedef struct BdrvCoGetBlockStatusData
{
3215 BlockDriverState
*bs
;
3216 BlockDriverState
*base
;
3222 } BdrvCoGetBlockStatusData
;
3225 * Returns true iff the specified sector is present in the disk image. Drivers
3226 * not implementing the functionality are assumed to not support backing files,
3227 * hence all their sectors are reported as allocated.
3229 * If 'sector_num' is beyond the end of the disk image the return value is 0
3230 * and 'pnum' is set to 0.
3232 * 'pnum' is set to the number of sectors (including and immediately following
3233 * the specified sector) that are known to be in the same
3234 * allocated/unallocated state.
3236 * 'nb_sectors' is the max value 'pnum' should be set to. If nb_sectors goes
3237 * beyond the end of the disk image it will be clamped.
3239 static int64_t coroutine_fn
bdrv_co_get_block_status(BlockDriverState
*bs
,
3241 int nb_sectors
, int *pnum
)
3247 length
= bdrv_getlength(bs
);
3252 if (sector_num
>= (length
>> BDRV_SECTOR_BITS
)) {
3257 n
= bs
->total_sectors
- sector_num
;
3258 if (n
< nb_sectors
) {
3262 if (!bs
->drv
->bdrv_co_get_block_status
) {
3264 ret
= BDRV_BLOCK_DATA
;
3265 if (bs
->drv
->protocol_name
) {
3266 ret
|= BDRV_BLOCK_OFFSET_VALID
| (sector_num
* BDRV_SECTOR_SIZE
);
3271 ret
= bs
->drv
->bdrv_co_get_block_status(bs
, sector_num
, nb_sectors
, pnum
);
3277 if (ret
& BDRV_BLOCK_RAW
) {
3278 assert(ret
& BDRV_BLOCK_OFFSET_VALID
);
3279 return bdrv_get_block_status(bs
->file
, ret
>> BDRV_SECTOR_BITS
,
3283 if (!(ret
& BDRV_BLOCK_DATA
) && !(ret
& BDRV_BLOCK_ZERO
)) {
3284 if (bdrv_unallocated_blocks_are_zero(bs
)) {
3285 ret
|= BDRV_BLOCK_ZERO
;
3286 } else if (bs
->backing_hd
) {
3287 BlockDriverState
*bs2
= bs
->backing_hd
;
3288 int64_t length2
= bdrv_getlength(bs2
);
3289 if (length2
>= 0 && sector_num
>= (length2
>> BDRV_SECTOR_BITS
)) {
3290 ret
|= BDRV_BLOCK_ZERO
;
3296 (ret
& BDRV_BLOCK_DATA
) && !(ret
& BDRV_BLOCK_ZERO
) &&
3297 (ret
& BDRV_BLOCK_OFFSET_VALID
)) {
3298 ret2
= bdrv_co_get_block_status(bs
->file
, ret
>> BDRV_SECTOR_BITS
,
3301 /* Ignore errors. This is just providing extra information, it
3302 * is useful but not necessary.
3304 ret
|= (ret2
& BDRV_BLOCK_ZERO
);
3311 /* Coroutine wrapper for bdrv_get_block_status() */
3312 static void coroutine_fn
bdrv_get_block_status_co_entry(void *opaque
)
3314 BdrvCoGetBlockStatusData
*data
= opaque
;
3315 BlockDriverState
*bs
= data
->bs
;
3317 data
->ret
= bdrv_co_get_block_status(bs
, data
->sector_num
, data
->nb_sectors
,
3323 * Synchronous wrapper around bdrv_co_get_block_status().
3325 * See bdrv_co_get_block_status() for details.
3327 int64_t bdrv_get_block_status(BlockDriverState
*bs
, int64_t sector_num
,
3328 int nb_sectors
, int *pnum
)
3331 BdrvCoGetBlockStatusData data
= {
3333 .sector_num
= sector_num
,
3334 .nb_sectors
= nb_sectors
,
3339 if (qemu_in_coroutine()) {
3340 /* Fast-path if already in coroutine context */
3341 bdrv_get_block_status_co_entry(&data
);
3343 co
= qemu_coroutine_create(bdrv_get_block_status_co_entry
);
3344 qemu_coroutine_enter(co
, &data
);
3345 while (!data
.done
) {
3352 int coroutine_fn
bdrv_is_allocated(BlockDriverState
*bs
, int64_t sector_num
,
3353 int nb_sectors
, int *pnum
)
3355 int64_t ret
= bdrv_get_block_status(bs
, sector_num
, nb_sectors
, pnum
);
3360 (ret
& BDRV_BLOCK_DATA
) ||
3361 ((ret
& BDRV_BLOCK_ZERO
) && !bdrv_has_zero_init(bs
));
3365 * Given an image chain: ... -> [BASE] -> [INTER1] -> [INTER2] -> [TOP]
3367 * Return true if the given sector is allocated in any image between
3368 * BASE and TOP (inclusive). BASE can be NULL to check if the given
3369 * sector is allocated in any image of the chain. Return false otherwise.
3371 * 'pnum' is set to the number of sectors (including and immediately following
3372 * the specified sector) that are known to be in the same
3373 * allocated/unallocated state.
3376 int bdrv_is_allocated_above(BlockDriverState
*top
,
3377 BlockDriverState
*base
,
3379 int nb_sectors
, int *pnum
)
3381 BlockDriverState
*intermediate
;
3382 int ret
, n
= nb_sectors
;
3385 while (intermediate
&& intermediate
!= base
) {
3387 ret
= bdrv_is_allocated(intermediate
, sector_num
, nb_sectors
,
3397 * [sector_num, nb_sectors] is unallocated on top but intermediate
3400 * [sector_num+x, nr_sectors] allocated.
3402 if (n
> pnum_inter
&&
3403 (intermediate
== top
||
3404 sector_num
+ pnum_inter
< intermediate
->total_sectors
)) {
3408 intermediate
= intermediate
->backing_hd
;
3415 const char *bdrv_get_encrypted_filename(BlockDriverState
*bs
)
3417 if (bs
->backing_hd
&& bs
->backing_hd
->encrypted
)
3418 return bs
->backing_file
;
3419 else if (bs
->encrypted
)
3420 return bs
->filename
;
3425 void bdrv_get_backing_filename(BlockDriverState
*bs
,
3426 char *filename
, int filename_size
)
3428 pstrcpy(filename
, filename_size
, bs
->backing_file
);
3431 int bdrv_write_compressed(BlockDriverState
*bs
, int64_t sector_num
,
3432 const uint8_t *buf
, int nb_sectors
)
3434 BlockDriver
*drv
= bs
->drv
;
3437 if (!drv
->bdrv_write_compressed
)
3439 if (bdrv_check_request(bs
, sector_num
, nb_sectors
))
3442 assert(QLIST_EMPTY(&bs
->dirty_bitmaps
));
3444 return drv
->bdrv_write_compressed(bs
, sector_num
, buf
, nb_sectors
);
3447 int bdrv_get_info(BlockDriverState
*bs
, BlockDriverInfo
*bdi
)
3449 BlockDriver
*drv
= bs
->drv
;
3452 if (!drv
->bdrv_get_info
)
3454 memset(bdi
, 0, sizeof(*bdi
));
3455 return drv
->bdrv_get_info(bs
, bdi
);
3458 ImageInfoSpecific
*bdrv_get_specific_info(BlockDriverState
*bs
)
3460 BlockDriver
*drv
= bs
->drv
;
3461 if (drv
&& drv
->bdrv_get_specific_info
) {
3462 return drv
->bdrv_get_specific_info(bs
);
3467 int bdrv_save_vmstate(BlockDriverState
*bs
, const uint8_t *buf
,
3468 int64_t pos
, int size
)
3471 struct iovec iov
= {
3472 .iov_base
= (void *) buf
,
3476 qemu_iovec_init_external(&qiov
, &iov
, 1);
3477 return bdrv_writev_vmstate(bs
, &qiov
, pos
);
3480 int bdrv_writev_vmstate(BlockDriverState
*bs
, QEMUIOVector
*qiov
, int64_t pos
)
3482 BlockDriver
*drv
= bs
->drv
;
3486 } else if (drv
->bdrv_save_vmstate
) {
3487 return drv
->bdrv_save_vmstate(bs
, qiov
, pos
);
3488 } else if (bs
->file
) {
3489 return bdrv_writev_vmstate(bs
->file
, qiov
, pos
);
3495 int bdrv_load_vmstate(BlockDriverState
*bs
, uint8_t *buf
,
3496 int64_t pos
, int size
)
3498 BlockDriver
*drv
= bs
->drv
;
3501 if (drv
->bdrv_load_vmstate
)
3502 return drv
->bdrv_load_vmstate(bs
, buf
, pos
, size
);
3504 return bdrv_load_vmstate(bs
->file
, buf
, pos
, size
);
3508 void bdrv_debug_event(BlockDriverState
*bs
, BlkDebugEvent event
)
3510 if (!bs
|| !bs
->drv
|| !bs
->drv
->bdrv_debug_event
) {
3514 bs
->drv
->bdrv_debug_event(bs
, event
);
3517 int bdrv_debug_breakpoint(BlockDriverState
*bs
, const char *event
,
3520 while (bs
&& bs
->drv
&& !bs
->drv
->bdrv_debug_breakpoint
) {
3524 if (bs
&& bs
->drv
&& bs
->drv
->bdrv_debug_breakpoint
) {
3525 return bs
->drv
->bdrv_debug_breakpoint(bs
, event
, tag
);
3531 int bdrv_debug_remove_breakpoint(BlockDriverState
*bs
, const char *tag
)
3533 while (bs
&& bs
->drv
&& !bs
->drv
->bdrv_debug_remove_breakpoint
) {
3537 if (bs
&& bs
->drv
&& bs
->drv
->bdrv_debug_remove_breakpoint
) {
3538 return bs
->drv
->bdrv_debug_remove_breakpoint(bs
, tag
);
3544 int bdrv_debug_resume(BlockDriverState
*bs
, const char *tag
)
3546 while (bs
&& bs
->drv
&& !bs
->drv
->bdrv_debug_resume
) {
3550 if (bs
&& bs
->drv
&& bs
->drv
->bdrv_debug_resume
) {
3551 return bs
->drv
->bdrv_debug_resume(bs
, tag
);
3557 bool bdrv_debug_is_suspended(BlockDriverState
*bs
, const char *tag
)
3559 while (bs
&& bs
->drv
&& !bs
->drv
->bdrv_debug_is_suspended
) {
3563 if (bs
&& bs
->drv
&& bs
->drv
->bdrv_debug_is_suspended
) {
3564 return bs
->drv
->bdrv_debug_is_suspended(bs
, tag
);
3570 int bdrv_is_snapshot(BlockDriverState
*bs
)
3572 return !!(bs
->open_flags
& BDRV_O_SNAPSHOT
);
3575 /* backing_file can either be relative, or absolute, or a protocol. If it is
3576 * relative, it must be relative to the chain. So, passing in bs->filename
3577 * from a BDS as backing_file should not be done, as that may be relative to
3578 * the CWD rather than the chain. */
3579 BlockDriverState
*bdrv_find_backing_image(BlockDriverState
*bs
,
3580 const char *backing_file
)
3582 char *filename_full
= NULL
;
3583 char *backing_file_full
= NULL
;
3584 char *filename_tmp
= NULL
;
3585 int is_protocol
= 0;
3586 BlockDriverState
*curr_bs
= NULL
;
3587 BlockDriverState
*retval
= NULL
;
3589 if (!bs
|| !bs
->drv
|| !backing_file
) {
3593 filename_full
= g_malloc(PATH_MAX
);
3594 backing_file_full
= g_malloc(PATH_MAX
);
3595 filename_tmp
= g_malloc(PATH_MAX
);
3597 is_protocol
= path_has_protocol(backing_file
);
3599 for (curr_bs
= bs
; curr_bs
->backing_hd
; curr_bs
= curr_bs
->backing_hd
) {
3601 /* If either of the filename paths is actually a protocol, then
3602 * compare unmodified paths; otherwise make paths relative */
3603 if (is_protocol
|| path_has_protocol(curr_bs
->backing_file
)) {
3604 if (strcmp(backing_file
, curr_bs
->backing_file
) == 0) {
3605 retval
= curr_bs
->backing_hd
;
3609 /* If not an absolute filename path, make it relative to the current
3610 * image's filename path */
3611 path_combine(filename_tmp
, PATH_MAX
, curr_bs
->filename
,
3614 /* We are going to compare absolute pathnames */
3615 if (!realpath(filename_tmp
, filename_full
)) {
3619 /* We need to make sure the backing filename we are comparing against
3620 * is relative to the current image filename (or absolute) */
3621 path_combine(filename_tmp
, PATH_MAX
, curr_bs
->filename
,
3622 curr_bs
->backing_file
);
3624 if (!realpath(filename_tmp
, backing_file_full
)) {
3628 if (strcmp(backing_file_full
, filename_full
) == 0) {
3629 retval
= curr_bs
->backing_hd
;
3635 g_free(filename_full
);
3636 g_free(backing_file_full
);
3637 g_free(filename_tmp
);
3641 int bdrv_get_backing_file_depth(BlockDriverState
*bs
)
3647 if (!bs
->backing_hd
) {
3651 return 1 + bdrv_get_backing_file_depth(bs
->backing_hd
);
3654 BlockDriverState
*bdrv_find_base(BlockDriverState
*bs
)
3656 BlockDriverState
*curr_bs
= NULL
;
3664 while (curr_bs
->backing_hd
) {
3665 curr_bs
= curr_bs
->backing_hd
;
3670 /**************************************************************/
3673 BlockDriverAIOCB
*bdrv_aio_readv(BlockDriverState
*bs
, int64_t sector_num
,
3674 QEMUIOVector
*qiov
, int nb_sectors
,
3675 BlockDriverCompletionFunc
*cb
, void *opaque
)
3677 trace_bdrv_aio_readv(bs
, sector_num
, nb_sectors
, opaque
);
3679 return bdrv_co_aio_rw_vector(bs
, sector_num
, qiov
, nb_sectors
, 0,
3683 BlockDriverAIOCB
*bdrv_aio_writev(BlockDriverState
*bs
, int64_t sector_num
,
3684 QEMUIOVector
*qiov
, int nb_sectors
,
3685 BlockDriverCompletionFunc
*cb
, void *opaque
)
3687 trace_bdrv_aio_writev(bs
, sector_num
, nb_sectors
, opaque
);
3689 return bdrv_co_aio_rw_vector(bs
, sector_num
, qiov
, nb_sectors
, 0,
3693 BlockDriverAIOCB
*bdrv_aio_write_zeroes(BlockDriverState
*bs
,
3694 int64_t sector_num
, int nb_sectors
, BdrvRequestFlags flags
,
3695 BlockDriverCompletionFunc
*cb
, void *opaque
)
3697 trace_bdrv_aio_write_zeroes(bs
, sector_num
, nb_sectors
, flags
, opaque
);
3699 return bdrv_co_aio_rw_vector(bs
, sector_num
, NULL
, nb_sectors
,
3700 BDRV_REQ_ZERO_WRITE
| flags
,
3705 typedef struct MultiwriteCB
{
3710 BlockDriverCompletionFunc
*cb
;
3712 QEMUIOVector
*free_qiov
;
3716 static void multiwrite_user_cb(MultiwriteCB
*mcb
)
3720 for (i
= 0; i
< mcb
->num_callbacks
; i
++) {
3721 mcb
->callbacks
[i
].cb(mcb
->callbacks
[i
].opaque
, mcb
->error
);
3722 if (mcb
->callbacks
[i
].free_qiov
) {
3723 qemu_iovec_destroy(mcb
->callbacks
[i
].free_qiov
);
3725 g_free(mcb
->callbacks
[i
].free_qiov
);
3729 static void multiwrite_cb(void *opaque
, int ret
)
3731 MultiwriteCB
*mcb
= opaque
;
3733 trace_multiwrite_cb(mcb
, ret
);
3735 if (ret
< 0 && !mcb
->error
) {
3739 mcb
->num_requests
--;
3740 if (mcb
->num_requests
== 0) {
3741 multiwrite_user_cb(mcb
);
3746 static int multiwrite_req_compare(const void *a
, const void *b
)
3748 const BlockRequest
*req1
= a
, *req2
= b
;
3751 * Note that we can't simply subtract req2->sector from req1->sector
3752 * here as that could overflow the return value.
3754 if (req1
->sector
> req2
->sector
) {
3756 } else if (req1
->sector
< req2
->sector
) {
3764 * Takes a bunch of requests and tries to merge them. Returns the number of
3765 * requests that remain after merging.
3767 static int multiwrite_merge(BlockDriverState
*bs
, BlockRequest
*reqs
,
3768 int num_reqs
, MultiwriteCB
*mcb
)
3772 // Sort requests by start sector
3773 qsort(reqs
, num_reqs
, sizeof(*reqs
), &multiwrite_req_compare
);
3775 // Check if adjacent requests touch the same clusters. If so, combine them,
3776 // filling up gaps with zero sectors.
3778 for (i
= 1; i
< num_reqs
; i
++) {
3780 int64_t oldreq_last
= reqs
[outidx
].sector
+ reqs
[outidx
].nb_sectors
;
3782 // Handle exactly sequential writes and overlapping writes.
3783 if (reqs
[i
].sector
<= oldreq_last
) {
3787 if (reqs
[outidx
].qiov
->niov
+ reqs
[i
].qiov
->niov
+ 1 > IOV_MAX
) {
3793 QEMUIOVector
*qiov
= g_malloc0(sizeof(*qiov
));
3794 qemu_iovec_init(qiov
,
3795 reqs
[outidx
].qiov
->niov
+ reqs
[i
].qiov
->niov
+ 1);
3797 // Add the first request to the merged one. If the requests are
3798 // overlapping, drop the last sectors of the first request.
3799 size
= (reqs
[i
].sector
- reqs
[outidx
].sector
) << 9;
3800 qemu_iovec_concat(qiov
, reqs
[outidx
].qiov
, 0, size
);
3802 // We should need to add any zeros between the two requests
3803 assert (reqs
[i
].sector
<= oldreq_last
);
3805 // Add the second request
3806 qemu_iovec_concat(qiov
, reqs
[i
].qiov
, 0, reqs
[i
].qiov
->size
);
3808 reqs
[outidx
].nb_sectors
= qiov
->size
>> 9;
3809 reqs
[outidx
].qiov
= qiov
;
3811 mcb
->callbacks
[i
].free_qiov
= reqs
[outidx
].qiov
;
3814 reqs
[outidx
].sector
= reqs
[i
].sector
;
3815 reqs
[outidx
].nb_sectors
= reqs
[i
].nb_sectors
;
3816 reqs
[outidx
].qiov
= reqs
[i
].qiov
;
3824 * Submit multiple AIO write requests at once.
3826 * On success, the function returns 0 and all requests in the reqs array have
3827 * been submitted. In error case this function returns -1, and any of the
3828 * requests may or may not be submitted yet. In particular, this means that the
3829 * callback will be called for some of the requests, for others it won't. The
3830 * caller must check the error field of the BlockRequest to wait for the right
3831 * callbacks (if error != 0, no callback will be called).
3833 * The implementation may modify the contents of the reqs array, e.g. to merge
3834 * requests. However, the fields opaque and error are left unmodified as they
3835 * are used to signal failure for a single request to the caller.
3837 int bdrv_aio_multiwrite(BlockDriverState
*bs
, BlockRequest
*reqs
, int num_reqs
)
3842 /* don't submit writes if we don't have a medium */
3843 if (bs
->drv
== NULL
) {
3844 for (i
= 0; i
< num_reqs
; i
++) {
3845 reqs
[i
].error
= -ENOMEDIUM
;
3850 if (num_reqs
== 0) {
3854 // Create MultiwriteCB structure
3855 mcb
= g_malloc0(sizeof(*mcb
) + num_reqs
* sizeof(*mcb
->callbacks
));
3856 mcb
->num_requests
= 0;
3857 mcb
->num_callbacks
= num_reqs
;
3859 for (i
= 0; i
< num_reqs
; i
++) {
3860 mcb
->callbacks
[i
].cb
= reqs
[i
].cb
;
3861 mcb
->callbacks
[i
].opaque
= reqs
[i
].opaque
;
3864 // Check for mergable requests
3865 num_reqs
= multiwrite_merge(bs
, reqs
, num_reqs
, mcb
);
3867 trace_bdrv_aio_multiwrite(mcb
, mcb
->num_callbacks
, num_reqs
);
3869 /* Run the aio requests. */
3870 mcb
->num_requests
= num_reqs
;
3871 for (i
= 0; i
< num_reqs
; i
++) {
3872 bdrv_co_aio_rw_vector(bs
, reqs
[i
].sector
, reqs
[i
].qiov
,
3873 reqs
[i
].nb_sectors
, reqs
[i
].flags
,
3881 void bdrv_aio_cancel(BlockDriverAIOCB
*acb
)
3883 acb
->aiocb_info
->cancel(acb
);
3886 /**************************************************************/
3887 /* async block device emulation */
3889 typedef struct BlockDriverAIOCBSync
{
3890 BlockDriverAIOCB common
;
3893 /* vector translation state */
3897 } BlockDriverAIOCBSync
;
3899 static void bdrv_aio_cancel_em(BlockDriverAIOCB
*blockacb
)
3901 BlockDriverAIOCBSync
*acb
=
3902 container_of(blockacb
, BlockDriverAIOCBSync
, common
);
3903 qemu_bh_delete(acb
->bh
);
3905 qemu_aio_release(acb
);
3908 static const AIOCBInfo bdrv_em_aiocb_info
= {
3909 .aiocb_size
= sizeof(BlockDriverAIOCBSync
),
3910 .cancel
= bdrv_aio_cancel_em
,
3913 static void bdrv_aio_bh_cb(void *opaque
)
3915 BlockDriverAIOCBSync
*acb
= opaque
;
3918 qemu_iovec_from_buf(acb
->qiov
, 0, acb
->bounce
, acb
->qiov
->size
);
3919 qemu_vfree(acb
->bounce
);
3920 acb
->common
.cb(acb
->common
.opaque
, acb
->ret
);
3921 qemu_bh_delete(acb
->bh
);
3923 qemu_aio_release(acb
);
3926 static BlockDriverAIOCB
*bdrv_aio_rw_vector(BlockDriverState
*bs
,
3930 BlockDriverCompletionFunc
*cb
,
3935 BlockDriverAIOCBSync
*acb
;
3937 acb
= qemu_aio_get(&bdrv_em_aiocb_info
, bs
, cb
, opaque
);
3938 acb
->is_write
= is_write
;
3940 acb
->bounce
= qemu_blockalign(bs
, qiov
->size
);
3941 acb
->bh
= qemu_bh_new(bdrv_aio_bh_cb
, acb
);
3944 qemu_iovec_to_buf(acb
->qiov
, 0, acb
->bounce
, qiov
->size
);
3945 acb
->ret
= bs
->drv
->bdrv_write(bs
, sector_num
, acb
->bounce
, nb_sectors
);
3947 acb
->ret
= bs
->drv
->bdrv_read(bs
, sector_num
, acb
->bounce
, nb_sectors
);
3950 qemu_bh_schedule(acb
->bh
);
3952 return &acb
->common
;
3955 static BlockDriverAIOCB
*bdrv_aio_readv_em(BlockDriverState
*bs
,
3956 int64_t sector_num
, QEMUIOVector
*qiov
, int nb_sectors
,
3957 BlockDriverCompletionFunc
*cb
, void *opaque
)
3959 return bdrv_aio_rw_vector(bs
, sector_num
, qiov
, nb_sectors
, cb
, opaque
, 0);
3962 static BlockDriverAIOCB
*bdrv_aio_writev_em(BlockDriverState
*bs
,
3963 int64_t sector_num
, QEMUIOVector
*qiov
, int nb_sectors
,
3964 BlockDriverCompletionFunc
*cb
, void *opaque
)
3966 return bdrv_aio_rw_vector(bs
, sector_num
, qiov
, nb_sectors
, cb
, opaque
, 1);
3970 typedef struct BlockDriverAIOCBCoroutine
{
3971 BlockDriverAIOCB common
;
3976 } BlockDriverAIOCBCoroutine
;
3978 static void bdrv_aio_co_cancel_em(BlockDriverAIOCB
*blockacb
)
3980 BlockDriverAIOCBCoroutine
*acb
=
3981 container_of(blockacb
, BlockDriverAIOCBCoroutine
, common
);
3990 static const AIOCBInfo bdrv_em_co_aiocb_info
= {
3991 .aiocb_size
= sizeof(BlockDriverAIOCBCoroutine
),
3992 .cancel
= bdrv_aio_co_cancel_em
,
3995 static void bdrv_co_em_bh(void *opaque
)
3997 BlockDriverAIOCBCoroutine
*acb
= opaque
;
3999 acb
->common
.cb(acb
->common
.opaque
, acb
->req
.error
);
4005 qemu_bh_delete(acb
->bh
);
4006 qemu_aio_release(acb
);
4009 /* Invoke bdrv_co_do_readv/bdrv_co_do_writev */
4010 static void coroutine_fn
bdrv_co_do_rw(void *opaque
)
4012 BlockDriverAIOCBCoroutine
*acb
= opaque
;
4013 BlockDriverState
*bs
= acb
->common
.bs
;
4015 if (!acb
->is_write
) {
4016 acb
->req
.error
= bdrv_co_do_readv(bs
, acb
->req
.sector
,
4017 acb
->req
.nb_sectors
, acb
->req
.qiov
, acb
->req
.flags
);
4019 acb
->req
.error
= bdrv_co_do_writev(bs
, acb
->req
.sector
,
4020 acb
->req
.nb_sectors
, acb
->req
.qiov
, acb
->req
.flags
);
4023 acb
->bh
= qemu_bh_new(bdrv_co_em_bh
, acb
);
4024 qemu_bh_schedule(acb
->bh
);
4027 static BlockDriverAIOCB
*bdrv_co_aio_rw_vector(BlockDriverState
*bs
,
4031 BdrvRequestFlags flags
,
4032 BlockDriverCompletionFunc
*cb
,
4037 BlockDriverAIOCBCoroutine
*acb
;
4039 acb
= qemu_aio_get(&bdrv_em_co_aiocb_info
, bs
, cb
, opaque
);
4040 acb
->req
.sector
= sector_num
;
4041 acb
->req
.nb_sectors
= nb_sectors
;
4042 acb
->req
.qiov
= qiov
;
4043 acb
->req
.flags
= flags
;
4044 acb
->is_write
= is_write
;
4047 co
= qemu_coroutine_create(bdrv_co_do_rw
);
4048 qemu_coroutine_enter(co
, acb
);
4050 return &acb
->common
;
4053 static void coroutine_fn
bdrv_aio_flush_co_entry(void *opaque
)
4055 BlockDriverAIOCBCoroutine
*acb
= opaque
;
4056 BlockDriverState
*bs
= acb
->common
.bs
;
4058 acb
->req
.error
= bdrv_co_flush(bs
);
4059 acb
->bh
= qemu_bh_new(bdrv_co_em_bh
, acb
);
4060 qemu_bh_schedule(acb
->bh
);
4063 BlockDriverAIOCB
*bdrv_aio_flush(BlockDriverState
*bs
,
4064 BlockDriverCompletionFunc
*cb
, void *opaque
)
4066 trace_bdrv_aio_flush(bs
, opaque
);
4069 BlockDriverAIOCBCoroutine
*acb
;
4071 acb
= qemu_aio_get(&bdrv_em_co_aiocb_info
, bs
, cb
, opaque
);
4074 co
= qemu_coroutine_create(bdrv_aio_flush_co_entry
);
4075 qemu_coroutine_enter(co
, acb
);
4077 return &acb
->common
;
4080 static void coroutine_fn
bdrv_aio_discard_co_entry(void *opaque
)
4082 BlockDriverAIOCBCoroutine
*acb
= opaque
;
4083 BlockDriverState
*bs
= acb
->common
.bs
;
4085 acb
->req
.error
= bdrv_co_discard(bs
, acb
->req
.sector
, acb
->req
.nb_sectors
);
4086 acb
->bh
= qemu_bh_new(bdrv_co_em_bh
, acb
);
4087 qemu_bh_schedule(acb
->bh
);
4090 BlockDriverAIOCB
*bdrv_aio_discard(BlockDriverState
*bs
,
4091 int64_t sector_num
, int nb_sectors
,
4092 BlockDriverCompletionFunc
*cb
, void *opaque
)
4095 BlockDriverAIOCBCoroutine
*acb
;
4097 trace_bdrv_aio_discard(bs
, sector_num
, nb_sectors
, opaque
);
4099 acb
= qemu_aio_get(&bdrv_em_co_aiocb_info
, bs
, cb
, opaque
);
4100 acb
->req
.sector
= sector_num
;
4101 acb
->req
.nb_sectors
= nb_sectors
;
4103 co
= qemu_coroutine_create(bdrv_aio_discard_co_entry
);
4104 qemu_coroutine_enter(co
, acb
);
4106 return &acb
->common
;
4109 void bdrv_init(void)
4111 module_call_init(MODULE_INIT_BLOCK
);
4114 void bdrv_init_with_whitelist(void)
4116 use_bdrv_whitelist
= 1;
4120 void *qemu_aio_get(const AIOCBInfo
*aiocb_info
, BlockDriverState
*bs
,
4121 BlockDriverCompletionFunc
*cb
, void *opaque
)
4123 BlockDriverAIOCB
*acb
;
4125 acb
= g_slice_alloc(aiocb_info
->aiocb_size
);
4126 acb
->aiocb_info
= aiocb_info
;
4129 acb
->opaque
= opaque
;
4133 void qemu_aio_release(void *p
)
4135 BlockDriverAIOCB
*acb
= p
;
4136 g_slice_free1(acb
->aiocb_info
->aiocb_size
, acb
);
4139 /**************************************************************/
4140 /* Coroutine block device emulation */
4142 typedef struct CoroutineIOCompletion
{
4143 Coroutine
*coroutine
;
4145 } CoroutineIOCompletion
;
4147 static void bdrv_co_io_em_complete(void *opaque
, int ret
)
4149 CoroutineIOCompletion
*co
= opaque
;
4152 qemu_coroutine_enter(co
->coroutine
, NULL
);
4155 static int coroutine_fn
bdrv_co_io_em(BlockDriverState
*bs
, int64_t sector_num
,
4156 int nb_sectors
, QEMUIOVector
*iov
,
4159 CoroutineIOCompletion co
= {
4160 .coroutine
= qemu_coroutine_self(),
4162 BlockDriverAIOCB
*acb
;
4165 acb
= bs
->drv
->bdrv_aio_writev(bs
, sector_num
, iov
, nb_sectors
,
4166 bdrv_co_io_em_complete
, &co
);
4168 acb
= bs
->drv
->bdrv_aio_readv(bs
, sector_num
, iov
, nb_sectors
,
4169 bdrv_co_io_em_complete
, &co
);
4172 trace_bdrv_co_io_em(bs
, sector_num
, nb_sectors
, is_write
, acb
);
4176 qemu_coroutine_yield();
4181 static int coroutine_fn
bdrv_co_readv_em(BlockDriverState
*bs
,
4182 int64_t sector_num
, int nb_sectors
,
4185 return bdrv_co_io_em(bs
, sector_num
, nb_sectors
, iov
, false);
4188 static int coroutine_fn
bdrv_co_writev_em(BlockDriverState
*bs
,
4189 int64_t sector_num
, int nb_sectors
,
4192 return bdrv_co_io_em(bs
, sector_num
, nb_sectors
, iov
, true);
4195 static void coroutine_fn
bdrv_flush_co_entry(void *opaque
)
4197 RwCo
*rwco
= opaque
;
4199 rwco
->ret
= bdrv_co_flush(rwco
->bs
);
4202 int coroutine_fn
bdrv_co_flush(BlockDriverState
*bs
)
4206 if (!bs
|| !bdrv_is_inserted(bs
) || bdrv_is_read_only(bs
)) {
4210 /* Write back cached data to the OS even with cache=unsafe */
4211 BLKDBG_EVENT(bs
->file
, BLKDBG_FLUSH_TO_OS
);
4212 if (bs
->drv
->bdrv_co_flush_to_os
) {
4213 ret
= bs
->drv
->bdrv_co_flush_to_os(bs
);
4219 /* But don't actually force it to the disk with cache=unsafe */
4220 if (bs
->open_flags
& BDRV_O_NO_FLUSH
) {
4224 BLKDBG_EVENT(bs
->file
, BLKDBG_FLUSH_TO_DISK
);
4225 if (bs
->drv
->bdrv_co_flush_to_disk
) {
4226 ret
= bs
->drv
->bdrv_co_flush_to_disk(bs
);
4227 } else if (bs
->drv
->bdrv_aio_flush
) {
4228 BlockDriverAIOCB
*acb
;
4229 CoroutineIOCompletion co
= {
4230 .coroutine
= qemu_coroutine_self(),
4233 acb
= bs
->drv
->bdrv_aio_flush(bs
, bdrv_co_io_em_complete
, &co
);
4237 qemu_coroutine_yield();
4242 * Some block drivers always operate in either writethrough or unsafe
4243 * mode and don't support bdrv_flush therefore. Usually qemu doesn't
4244 * know how the server works (because the behaviour is hardcoded or
4245 * depends on server-side configuration), so we can't ensure that
4246 * everything is safe on disk. Returning an error doesn't work because
4247 * that would break guests even if the server operates in writethrough
4250 * Let's hope the user knows what he's doing.
4258 /* Now flush the underlying protocol. It will also have BDRV_O_NO_FLUSH
4259 * in the case of cache=unsafe, so there are no useless flushes.
4262 return bdrv_co_flush(bs
->file
);
4265 void bdrv_invalidate_cache(BlockDriverState
*bs
)
4267 if (bs
->drv
&& bs
->drv
->bdrv_invalidate_cache
) {
4268 bs
->drv
->bdrv_invalidate_cache(bs
);
4272 void bdrv_invalidate_cache_all(void)
4274 BlockDriverState
*bs
;
4276 QTAILQ_FOREACH(bs
, &bdrv_states
, list
) {
4277 bdrv_invalidate_cache(bs
);
4281 void bdrv_clear_incoming_migration_all(void)
4283 BlockDriverState
*bs
;
4285 QTAILQ_FOREACH(bs
, &bdrv_states
, list
) {
4286 bs
->open_flags
= bs
->open_flags
& ~(BDRV_O_INCOMING
);
4290 int bdrv_flush(BlockDriverState
*bs
)
4298 if (qemu_in_coroutine()) {
4299 /* Fast-path if already in coroutine context */
4300 bdrv_flush_co_entry(&rwco
);
4302 co
= qemu_coroutine_create(bdrv_flush_co_entry
);
4303 qemu_coroutine_enter(co
, &rwco
);
4304 while (rwco
.ret
== NOT_DONE
) {
4312 static void coroutine_fn
bdrv_discard_co_entry(void *opaque
)
4314 RwCo
*rwco
= opaque
;
4316 rwco
->ret
= bdrv_co_discard(rwco
->bs
, rwco
->sector_num
, rwco
->nb_sectors
);
4319 /* if no limit is specified in the BlockLimits use a default
4320 * of 32768 512-byte sectors (16 MiB) per request.
4322 #define MAX_DISCARD_DEFAULT 32768
4324 int coroutine_fn
bdrv_co_discard(BlockDriverState
*bs
, int64_t sector_num
,
4331 } else if (bdrv_check_request(bs
, sector_num
, nb_sectors
)) {
4333 } else if (bs
->read_only
) {
4337 bdrv_reset_dirty(bs
, sector_num
, nb_sectors
);
4339 /* Do nothing if disabled. */
4340 if (!(bs
->open_flags
& BDRV_O_UNMAP
)) {
4344 if (!bs
->drv
->bdrv_co_discard
&& !bs
->drv
->bdrv_aio_discard
) {
4348 max_discard
= bs
->bl
.max_discard
? bs
->bl
.max_discard
: MAX_DISCARD_DEFAULT
;
4349 while (nb_sectors
> 0) {
4351 int num
= nb_sectors
;
4354 if (bs
->bl
.discard_alignment
&&
4355 num
>= bs
->bl
.discard_alignment
&&
4356 sector_num
% bs
->bl
.discard_alignment
) {
4357 if (num
> bs
->bl
.discard_alignment
) {
4358 num
= bs
->bl
.discard_alignment
;
4360 num
-= sector_num
% bs
->bl
.discard_alignment
;
4363 /* limit request size */
4364 if (num
> max_discard
) {
4368 if (bs
->drv
->bdrv_co_discard
) {
4369 ret
= bs
->drv
->bdrv_co_discard(bs
, sector_num
, num
);
4371 BlockDriverAIOCB
*acb
;
4372 CoroutineIOCompletion co
= {
4373 .coroutine
= qemu_coroutine_self(),
4376 acb
= bs
->drv
->bdrv_aio_discard(bs
, sector_num
, nb_sectors
,
4377 bdrv_co_io_em_complete
, &co
);
4381 qemu_coroutine_yield();
4385 if (ret
&& ret
!= -ENOTSUP
) {
4395 int bdrv_discard(BlockDriverState
*bs
, int64_t sector_num
, int nb_sectors
)
4400 .sector_num
= sector_num
,
4401 .nb_sectors
= nb_sectors
,
4405 if (qemu_in_coroutine()) {
4406 /* Fast-path if already in coroutine context */
4407 bdrv_discard_co_entry(&rwco
);
4409 co
= qemu_coroutine_create(bdrv_discard_co_entry
);
4410 qemu_coroutine_enter(co
, &rwco
);
4411 while (rwco
.ret
== NOT_DONE
) {
4419 /**************************************************************/
4420 /* removable device support */
4423 * Return TRUE if the media is present
4425 int bdrv_is_inserted(BlockDriverState
*bs
)
4427 BlockDriver
*drv
= bs
->drv
;
4431 if (!drv
->bdrv_is_inserted
)
4433 return drv
->bdrv_is_inserted(bs
);
4437 * Return whether the media changed since the last call to this
4438 * function, or -ENOTSUP if we don't know. Most drivers don't know.
4440 int bdrv_media_changed(BlockDriverState
*bs
)
4442 BlockDriver
*drv
= bs
->drv
;
4444 if (drv
&& drv
->bdrv_media_changed
) {
4445 return drv
->bdrv_media_changed(bs
);
4451 * If eject_flag is TRUE, eject the media. Otherwise, close the tray
4453 void bdrv_eject(BlockDriverState
*bs
, bool eject_flag
)
4455 BlockDriver
*drv
= bs
->drv
;
4457 if (drv
&& drv
->bdrv_eject
) {
4458 drv
->bdrv_eject(bs
, eject_flag
);
4461 if (bs
->device_name
[0] != '\0') {
4462 bdrv_emit_qmp_eject_event(bs
, eject_flag
);
4467 * Lock or unlock the media (if it is locked, the user won't be able
4468 * to eject it manually).
4470 void bdrv_lock_medium(BlockDriverState
*bs
, bool locked
)
4472 BlockDriver
*drv
= bs
->drv
;
4474 trace_bdrv_lock_medium(bs
, locked
);
4476 if (drv
&& drv
->bdrv_lock_medium
) {
4477 drv
->bdrv_lock_medium(bs
, locked
);
4481 /* needed for generic scsi interface */
4483 int bdrv_ioctl(BlockDriverState
*bs
, unsigned long int req
, void *buf
)
4485 BlockDriver
*drv
= bs
->drv
;
4487 if (drv
&& drv
->bdrv_ioctl
)
4488 return drv
->bdrv_ioctl(bs
, req
, buf
);
4492 BlockDriverAIOCB
*bdrv_aio_ioctl(BlockDriverState
*bs
,
4493 unsigned long int req
, void *buf
,
4494 BlockDriverCompletionFunc
*cb
, void *opaque
)
4496 BlockDriver
*drv
= bs
->drv
;
4498 if (drv
&& drv
->bdrv_aio_ioctl
)
4499 return drv
->bdrv_aio_ioctl(bs
, req
, buf
, cb
, opaque
);
4503 void bdrv_set_buffer_alignment(BlockDriverState
*bs
, int align
)
4505 bs
->buffer_alignment
= align
;
4508 void *qemu_blockalign(BlockDriverState
*bs
, size_t size
)
4510 return qemu_memalign((bs
&& bs
->buffer_alignment
) ? bs
->buffer_alignment
: 512, size
);
4514 * Check if all memory in this vector is sector aligned.
4516 bool bdrv_qiov_is_aligned(BlockDriverState
*bs
, QEMUIOVector
*qiov
)
4520 for (i
= 0; i
< qiov
->niov
; i
++) {
4521 if ((uintptr_t) qiov
->iov
[i
].iov_base
% bs
->buffer_alignment
) {
4529 BdrvDirtyBitmap
*bdrv_create_dirty_bitmap(BlockDriverState
*bs
, int granularity
)
4531 int64_t bitmap_size
;
4532 BdrvDirtyBitmap
*bitmap
;
4534 assert((granularity
& (granularity
- 1)) == 0);
4536 granularity
>>= BDRV_SECTOR_BITS
;
4537 assert(granularity
);
4538 bitmap_size
= (bdrv_getlength(bs
) >> BDRV_SECTOR_BITS
);
4539 bitmap
= g_malloc0(sizeof(BdrvDirtyBitmap
));
4540 bitmap
->bitmap
= hbitmap_alloc(bitmap_size
, ffs(granularity
) - 1);
4541 QLIST_INSERT_HEAD(&bs
->dirty_bitmaps
, bitmap
, list
);
4545 void bdrv_release_dirty_bitmap(BlockDriverState
*bs
, BdrvDirtyBitmap
*bitmap
)
4547 BdrvDirtyBitmap
*bm
, *next
;
4548 QLIST_FOREACH_SAFE(bm
, &bs
->dirty_bitmaps
, list
, next
) {
4550 QLIST_REMOVE(bitmap
, list
);
4551 hbitmap_free(bitmap
->bitmap
);
4558 BlockDirtyInfoList
*bdrv_query_dirty_bitmaps(BlockDriverState
*bs
)
4560 BdrvDirtyBitmap
*bm
;
4561 BlockDirtyInfoList
*list
= NULL
;
4562 BlockDirtyInfoList
**plist
= &list
;
4564 QLIST_FOREACH(bm
, &bs
->dirty_bitmaps
, list
) {
4565 BlockDirtyInfo
*info
= g_malloc0(sizeof(BlockDirtyInfo
));
4566 BlockDirtyInfoList
*entry
= g_malloc0(sizeof(BlockDirtyInfoList
));
4567 info
->count
= bdrv_get_dirty_count(bs
, bm
);
4569 ((int64_t) BDRV_SECTOR_SIZE
<< hbitmap_granularity(bm
->bitmap
));
4570 entry
->value
= info
;
4572 plist
= &entry
->next
;
4578 int bdrv_get_dirty(BlockDriverState
*bs
, BdrvDirtyBitmap
*bitmap
, int64_t sector
)
4581 return hbitmap_get(bitmap
->bitmap
, sector
);
4587 void bdrv_dirty_iter_init(BlockDriverState
*bs
,
4588 BdrvDirtyBitmap
*bitmap
, HBitmapIter
*hbi
)
4590 hbitmap_iter_init(hbi
, bitmap
->bitmap
, 0);
4593 void bdrv_set_dirty(BlockDriverState
*bs
, int64_t cur_sector
,
4596 BdrvDirtyBitmap
*bitmap
;
4597 QLIST_FOREACH(bitmap
, &bs
->dirty_bitmaps
, list
) {
4598 hbitmap_set(bitmap
->bitmap
, cur_sector
, nr_sectors
);
4602 void bdrv_reset_dirty(BlockDriverState
*bs
, int64_t cur_sector
, int nr_sectors
)
4604 BdrvDirtyBitmap
*bitmap
;
4605 QLIST_FOREACH(bitmap
, &bs
->dirty_bitmaps
, list
) {
4606 hbitmap_reset(bitmap
->bitmap
, cur_sector
, nr_sectors
);
4610 int64_t bdrv_get_dirty_count(BlockDriverState
*bs
, BdrvDirtyBitmap
*bitmap
)
4612 return hbitmap_count(bitmap
->bitmap
);
4615 /* Get a reference to bs */
4616 void bdrv_ref(BlockDriverState
*bs
)
4621 /* Release a previously grabbed reference to bs.
4622 * If after releasing, reference count is zero, the BlockDriverState is
4624 void bdrv_unref(BlockDriverState
*bs
)
4626 assert(bs
->refcnt
> 0);
4627 if (--bs
->refcnt
== 0) {
4632 void bdrv_set_in_use(BlockDriverState
*bs
, int in_use
)
4634 assert(bs
->in_use
!= in_use
);
4635 bs
->in_use
= in_use
;
4638 int bdrv_in_use(BlockDriverState
*bs
)
4643 void bdrv_iostatus_enable(BlockDriverState
*bs
)
4645 bs
->iostatus_enabled
= true;
4646 bs
->iostatus
= BLOCK_DEVICE_IO_STATUS_OK
;
4649 /* The I/O status is only enabled if the drive explicitly
4650 * enables it _and_ the VM is configured to stop on errors */
4651 bool bdrv_iostatus_is_enabled(const BlockDriverState
*bs
)
4653 return (bs
->iostatus_enabled
&&
4654 (bs
->on_write_error
== BLOCKDEV_ON_ERROR_ENOSPC
||
4655 bs
->on_write_error
== BLOCKDEV_ON_ERROR_STOP
||
4656 bs
->on_read_error
== BLOCKDEV_ON_ERROR_STOP
));
4659 void bdrv_iostatus_disable(BlockDriverState
*bs
)
4661 bs
->iostatus_enabled
= false;
4664 void bdrv_iostatus_reset(BlockDriverState
*bs
)
4666 if (bdrv_iostatus_is_enabled(bs
)) {
4667 bs
->iostatus
= BLOCK_DEVICE_IO_STATUS_OK
;
4669 block_job_iostatus_reset(bs
->job
);
4674 void bdrv_iostatus_set_err(BlockDriverState
*bs
, int error
)
4676 assert(bdrv_iostatus_is_enabled(bs
));
4677 if (bs
->iostatus
== BLOCK_DEVICE_IO_STATUS_OK
) {
4678 bs
->iostatus
= error
== ENOSPC
? BLOCK_DEVICE_IO_STATUS_NOSPACE
:
4679 BLOCK_DEVICE_IO_STATUS_FAILED
;
4684 bdrv_acct_start(BlockDriverState
*bs
, BlockAcctCookie
*cookie
, int64_t bytes
,
4685 enum BlockAcctType type
)
4687 assert(type
< BDRV_MAX_IOTYPE
);
4689 cookie
->bytes
= bytes
;
4690 cookie
->start_time_ns
= get_clock();
4691 cookie
->type
= type
;
4695 bdrv_acct_done(BlockDriverState
*bs
, BlockAcctCookie
*cookie
)
4697 assert(cookie
->type
< BDRV_MAX_IOTYPE
);
4699 bs
->nr_bytes
[cookie
->type
] += cookie
->bytes
;
4700 bs
->nr_ops
[cookie
->type
]++;
4701 bs
->total_time_ns
[cookie
->type
] += get_clock() - cookie
->start_time_ns
;
4704 void bdrv_img_create(const char *filename
, const char *fmt
,
4705 const char *base_filename
, const char *base_fmt
,
4706 char *options
, uint64_t img_size
, int flags
,
4707 Error
**errp
, bool quiet
)
4709 QEMUOptionParameter
*param
= NULL
, *create_options
= NULL
;
4710 QEMUOptionParameter
*backing_fmt
, *backing_file
, *size
;
4711 BlockDriver
*drv
, *proto_drv
;
4712 BlockDriver
*backing_drv
= NULL
;
4713 Error
*local_err
= NULL
;
4716 /* Find driver and parse its options */
4717 drv
= bdrv_find_format(fmt
);
4719 error_setg(errp
, "Unknown file format '%s'", fmt
);
4723 proto_drv
= bdrv_find_protocol(filename
, true);
4725 error_setg(errp
, "Unknown protocol '%s'", filename
);
4729 create_options
= append_option_parameters(create_options
,
4730 drv
->create_options
);
4731 create_options
= append_option_parameters(create_options
,
4732 proto_drv
->create_options
);
4734 /* Create parameter list with default values */
4735 param
= parse_option_parameters("", create_options
, param
);
4737 set_option_parameter_int(param
, BLOCK_OPT_SIZE
, img_size
);
4739 /* Parse -o options */
4741 param
= parse_option_parameters(options
, create_options
, param
);
4742 if (param
== NULL
) {
4743 error_setg(errp
, "Invalid options for file format '%s'.", fmt
);
4748 if (base_filename
) {
4749 if (set_option_parameter(param
, BLOCK_OPT_BACKING_FILE
,
4751 error_setg(errp
, "Backing file not supported for file format '%s'",
4758 if (set_option_parameter(param
, BLOCK_OPT_BACKING_FMT
, base_fmt
)) {
4759 error_setg(errp
, "Backing file format not supported for file "
4760 "format '%s'", fmt
);
4765 backing_file
= get_option_parameter(param
, BLOCK_OPT_BACKING_FILE
);
4766 if (backing_file
&& backing_file
->value
.s
) {
4767 if (!strcmp(filename
, backing_file
->value
.s
)) {
4768 error_setg(errp
, "Error: Trying to create an image with the "
4769 "same filename as the backing file");
4774 backing_fmt
= get_option_parameter(param
, BLOCK_OPT_BACKING_FMT
);
4775 if (backing_fmt
&& backing_fmt
->value
.s
) {
4776 backing_drv
= bdrv_find_format(backing_fmt
->value
.s
);
4778 error_setg(errp
, "Unknown backing file format '%s'",
4779 backing_fmt
->value
.s
);
4784 // The size for the image must always be specified, with one exception:
4785 // If we are using a backing file, we can obtain the size from there
4786 size
= get_option_parameter(param
, BLOCK_OPT_SIZE
);
4787 if (size
&& size
->value
.n
== -1) {
4788 if (backing_file
&& backing_file
->value
.s
) {
4789 BlockDriverState
*bs
;
4794 /* backing files always opened read-only */
4796 flags
& ~(BDRV_O_RDWR
| BDRV_O_SNAPSHOT
| BDRV_O_NO_BACKING
);
4800 ret
= bdrv_open(bs
, backing_file
->value
.s
, NULL
, back_flags
,
4801 backing_drv
, &local_err
);
4803 error_setg_errno(errp
, -ret
, "Could not open '%s': %s",
4804 backing_file
->value
.s
,
4805 error_get_pretty(local_err
));
4806 error_free(local_err
);
4811 bdrv_get_geometry(bs
, &size
);
4814 snprintf(buf
, sizeof(buf
), "%" PRId64
, size
);
4815 set_option_parameter(param
, BLOCK_OPT_SIZE
, buf
);
4819 error_setg(errp
, "Image creation needs a size parameter");
4825 printf("Formatting '%s', fmt=%s ", filename
, fmt
);
4826 print_option_parameters(param
);
4829 ret
= bdrv_create(drv
, filename
, param
, &local_err
);
4830 if (ret
== -EFBIG
) {
4831 /* This is generally a better message than whatever the driver would
4832 * deliver (especially because of the cluster_size_hint), since that
4833 * is most probably not much different from "image too large". */
4834 const char *cluster_size_hint
= "";
4835 if (get_option_parameter(create_options
, BLOCK_OPT_CLUSTER_SIZE
)) {
4836 cluster_size_hint
= " (try using a larger cluster size)";
4838 error_setg(errp
, "The image size is too large for file format '%s'"
4839 "%s", fmt
, cluster_size_hint
);
4840 error_free(local_err
);
4845 free_option_parameters(create_options
);
4846 free_option_parameters(param
);
4848 if (error_is_set(&local_err
)) {
4849 error_propagate(errp
, local_err
);
4853 AioContext
*bdrv_get_aio_context(BlockDriverState
*bs
)
4855 /* Currently BlockDriverState always uses the main loop AioContext */
4856 return qemu_get_aio_context();
4859 void bdrv_add_before_write_notifier(BlockDriverState
*bs
,
4860 NotifierWithReturn
*notifier
)
4862 notifier_with_return_list_add(&bs
->before_write_notifiers
, notifier
);
4865 int bdrv_amend_options(BlockDriverState
*bs
, QEMUOptionParameter
*options
)
4867 if (bs
->drv
->bdrv_amend_options
== NULL
) {
4870 return bs
->drv
->bdrv_amend_options(bs
, options
);
4873 ExtSnapshotPerm
bdrv_check_ext_snapshot(BlockDriverState
*bs
)
4875 if (bs
->drv
->bdrv_check_ext_snapshot
) {
4876 return bs
->drv
->bdrv_check_ext_snapshot(bs
);
4879 if (bs
->file
&& bs
->file
->drv
&& bs
->file
->drv
->bdrv_check_ext_snapshot
) {
4880 return bs
->file
->drv
->bdrv_check_ext_snapshot(bs
);
4883 /* external snapshots are allowed by default */
4884 return EXT_SNAPSHOT_ALLOWED
;
4887 ExtSnapshotPerm
bdrv_check_ext_snapshot_forbidden(BlockDriverState
*bs
)
4889 return EXT_SNAPSHOT_FORBIDDEN
;