hw/esp.c

   1 /*
   2  * QEMU ESP/NCR53C9x emulation
   3  *
   4  * Copyright (c) 2005-2006 Fabrice Bellard
   5  *
   6  * Permission is hereby granted, free of charge, to any person obtaining a copy
   7  * of this software and associated documentation files (the "Software"), to deal
   8  * in the Software without restriction, including without limitation the rights
   9  * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
  10  * copies of the Software, and to permit persons to whom the Software is
  11  * furnished to do so, subject to the following conditions:
  12  *
  13  * The above copyright notice and this permission notice shall be included in
  14  * all copies or substantial portions of the Software.
  15  *
  16  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  17  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  18  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
  19  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  20  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
  21  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
  22  * THE SOFTWARE.
  23  */
  24
  25 #include "sysbus.h"
  26 #include "scsi.h"
  27 #include "esp.h"
  28
  29 /* debug ESP card */
  30 //#define DEBUG_ESP
  31
  32 /*
  33  * On Sparc32, this is the ESP (NCR53C90) part of chip STP2000 (Master I/O),
  34  * also produced as NCR89C100. See
  35  * http://www.ibiblio.org/pub/historic-linux/early-ports/Sparc/NCR/NCR89C100.txt
  36  * and
  37  * http://www.ibiblio.org/pub/historic-linux/early-ports/Sparc/NCR/NCR53C9X.txt
  38  */
  39
  40 #ifdef DEBUG_ESP
  41 #define DPRINTF(fmt, ...)                                       \
  42     do { printf("ESP: " fmt , ## __VA_ARGS__); } while (0)
  43 #else
  44 #define DPRINTF(fmt, ...) do {} while (0)
  45 #endif
  46
  47 #define ESP_ERROR(fmt, ...)                                             \
  48     do { printf("ESP ERROR: %s: " fmt, __func__ , ## __VA_ARGS__); } while (0)
  49
  50 #define ESP_REGS 16
  51 #define TI_BUFSZ 16
  52
  53 typedef struct ESPState ESPState;
  54
  55 struct ESPState {
  56     SysBusDevice busdev;
  57     uint32_t it_shift;
  58     qemu_irq irq;
  59     uint8_t rregs[ESP_REGS];
  60     uint8_t wregs[ESP_REGS];
  61     int32_t ti_size;
  62     uint32_t ti_rptr, ti_wptr;
  63     uint8_t ti_buf[TI_BUFSZ];
  64     uint32_t sense;
  65     uint32_t dma;
  66     SCSIBus bus;
  67     SCSIDevice *current_dev;
  68     uint8_t cmdbuf[TI_BUFSZ];
  69     uint32_t cmdlen;
  70     uint32_t do_cmd;
  71
  72     /* The amount of data left in the current DMA transfer.  */
  73     uint32_t dma_left;
  74     /* The size of the current DMA transfer.  Zero if no transfer is in
  75        progress.  */
  76     uint32_t dma_counter;
  77     uint8_t *async_buf;
  78     uint32_t async_len;
  79
  80     espdma_memory_read_write dma_memory_read;
  81     espdma_memory_read_write dma_memory_write;
  82     void *dma_opaque;
  83 };
  84
  85 #define ESP_TCLO   0x0
  86 #define ESP_TCMID  0x1
  87 #define ESP_FIFO   0x2
  88 #define ESP_CMD    0x3
  89 #define ESP_RSTAT  0x4
  90 #define ESP_WBUSID 0x4
  91 #define ESP_RINTR  0x5
  92 #define ESP_WSEL   0x5
  93 #define ESP_RSEQ   0x6
  94 #define ESP_WSYNTP 0x6
  95 #define ESP_RFLAGS 0x7
  96 #define ESP_WSYNO  0x7
  97 #define ESP_CFG1   0x8
  98 #define ESP_RRES1  0x9
  99 #define ESP_WCCF   0x9
 100 #define ESP_RRES2  0xa
 101 #define ESP_WTEST  0xa
 102 #define ESP_CFG2   0xb
 103 #define ESP_CFG3   0xc
 104 #define ESP_RES3   0xd
 105 #define ESP_TCHI   0xe
 106 #define ESP_RES4   0xf
 107
 108 #define CMD_DMA 0x80
 109 #define CMD_CMD 0x7f
 110
 111 #define CMD_NOP      0x00
 112 #define CMD_FLUSH    0x01
 113 #define CMD_RESET    0x02
 114 #define CMD_BUSRESET 0x03
 115 #define CMD_TI       0x10
 116 #define CMD_ICCS     0x11
 117 #define CMD_MSGACC   0x12
 118 #define CMD_PAD      0x18
 119 #define CMD_SATN     0x1a
 120 #define CMD_SEL      0x41
 121 #define CMD_SELATN   0x42
 122 #define CMD_SELATNS  0x43
 123 #define CMD_ENSEL    0x44
 124
 125 #define STAT_DO 0x00
 126 #define STAT_DI 0x01
 127 #define STAT_CD 0x02
 128 #define STAT_ST 0x03
 129 #define STAT_MO 0x06
 130 #define STAT_MI 0x07
 131 #define STAT_PIO_MASK 0x06
 132
 133 #define STAT_TC 0x10
 134 #define STAT_PE 0x20
 135 #define STAT_GE 0x40
 136 #define STAT_INT 0x80
 137
 138 #define BUSID_DID 0x07
 139
 140 #define INTR_FC 0x08
 141 #define INTR_BS 0x10
 142 #define INTR_DC 0x20
 143 #define INTR_RST 0x80
 144
 145 #define SEQ_0 0x0
 146 #define SEQ_CD 0x4
 147
 148 #define CFG1_RESREPT 0x40
 149
 150 #define TCHI_FAS100A 0x4
 151
 152 static void esp_raise_irq(ESPState *s)
 153 {
 154     if (!(s->rregs[ESP_RSTAT] & STAT_INT)) {
 155         s->rregs[ESP_RSTAT] |= STAT_INT;
 156         qemu_irq_raise(s->irq);
 157     }
 158 }
 159
 160 static void esp_lower_irq(ESPState *s)
 161 {
 162     if (s->rregs[ESP_RSTAT] & STAT_INT) {
 163         s->rregs[ESP_RSTAT] &= ~STAT_INT;
 164         qemu_irq_lower(s->irq);
 165     }
 166 }
 167
 168 static uint32_t get_cmd(ESPState *s, uint8_t *buf)
 169 {
 170     uint32_t dmalen;
 171     int target;
 172
 173     target = s->wregs[ESP_WBUSID] & BUSID_DID;
 174     if (s->dma) {
 175         dmalen = s->rregs[ESP_TCLO] | (s->rregs[ESP_TCMID] << 8);
 176         s->dma_memory_read(s->dma_opaque, buf, dmalen);
 177     } else {
 178         dmalen = s->ti_size;
 179         memcpy(buf, s->ti_buf, dmalen);
 180         buf[0] = 0;
 181     }
 182     DPRINTF("get_cmd: len %d target %d\n", dmalen, target);
 183
 184     s->ti_size = 0;
 185     s->ti_rptr = 0;
 186     s->ti_wptr = 0;
 187
 188     if (s->current_dev) {
 189         /* Started a new command before the old one finished.  Cancel it.  */
 190         s->current_dev->info->cancel_io(s->current_dev, 0);
 191         s->async_len = 0;
 192     }
 193
 194     if (target >= ESP_MAX_DEVS || !s->bus.devs[target]) {
 195         // No such drive
 196         s->rregs[ESP_RSTAT] = 0;
 197         s->rregs[ESP_RINTR] = INTR_DC;
 198         s->rregs[ESP_RSEQ] = SEQ_0;
 199         esp_raise_irq(s);
 200         return 0;
 201     }
 202     s->current_dev = s->bus.devs[target];
 203     return dmalen;
 204 }
 205
 206 static void do_busid_cmd(ESPState *s, uint8_t *buf, uint8_t busid)
 207 {
 208     int32_t datalen;
 209     int lun;
 210
 211     DPRINTF("do_busid_cmd: busid 0x%x\n", busid);
 212     lun = busid & 7;
 213     datalen = s->current_dev->info->send_command(s->current_dev, 0, buf, lun);
 214     s->ti_size = datalen;
 215     if (datalen != 0) {
 216         s->rregs[ESP_RSTAT] = STAT_TC;
 217         s->dma_left = 0;
 218         s->dma_counter = 0;
 219         if (datalen > 0) {
 220             s->rregs[ESP_RSTAT] |= STAT_DI;
 221             s->current_dev->info->read_data(s->current_dev, 0);
 222         } else {
 223             s->rregs[ESP_RSTAT] |= STAT_DO;
 224             s->current_dev->info->write_data(s->current_dev, 0);
 225         }
 226     }
 227     s->rregs[ESP_RINTR] = INTR_BS | INTR_FC;
 228     s->rregs[ESP_RSEQ] = SEQ_CD;
 229     esp_raise_irq(s);
 230 }
 231
 232 static void do_cmd(ESPState *s, uint8_t *buf)
 233 {
 234     uint8_t busid = buf[0];
 235
 236     do_busid_cmd(s, &buf[1], busid);
 237 }
 238
 239 static void handle_satn(ESPState *s)
 240 {
 241     uint8_t buf[32];
 242     int len;
 243
 244     len = get_cmd(s, buf);
 245     if (len)
 246         do_cmd(s, buf);
 247 }
 248
 249 static void handle_s_without_atn(ESPState *s)
 250 {
 251     uint8_t buf[32];
 252     int len;
 253
 254     len = get_cmd(s, buf);
 255     if (len) {
 256         do_busid_cmd(s, buf, 0);
 257     }
 258 }
 259
 260 static void handle_satn_stop(ESPState *s)
 261 {
 262     s->cmdlen = get_cmd(s, s->cmdbuf);
 263     if (s->cmdlen) {
 264         DPRINTF("Set ATN & Stop: cmdlen %d\n", s->cmdlen);
 265         s->do_cmd = 1;
 266         s->rregs[ESP_RSTAT] = STAT_TC | STAT_CD;
 267         s->rregs[ESP_RINTR] = INTR_BS | INTR_FC;
 268         s->rregs[ESP_RSEQ] = SEQ_CD;
 269         esp_raise_irq(s);
 270     }
 271 }
 272
 273 static void write_response(ESPState *s)
 274 {
 275     DPRINTF("Transfer status (sense=%d)\n", s->sense);
 276     s->ti_buf[0] = s->sense;
 277     s->ti_buf[1] = 0;
 278     if (s->dma) {
 279         s->dma_memory_write(s->dma_opaque, s->ti_buf, 2);
 280         s->rregs[ESP_RSTAT] = STAT_TC | STAT_ST;
 281         s->rregs[ESP_RINTR] = INTR_BS | INTR_FC;
 282         s->rregs[ESP_RSEQ] = SEQ_CD;
 283     } else {
 284         s->ti_size = 2;
 285         s->ti_rptr = 0;
 286         s->ti_wptr = 0;
 287         s->rregs[ESP_RFLAGS] = 2;
 288     }
 289     esp_raise_irq(s);
 290 }
 291
 292 static void esp_dma_done(ESPState *s)
 293 {
 294     s->rregs[ESP_RSTAT] |= STAT_TC;
 295     s->rregs[ESP_RINTR] = INTR_BS;
 296     s->rregs[ESP_RSEQ] = 0;
 297     s->rregs[ESP_RFLAGS] = 0;
 298     s->rregs[ESP_TCLO] = 0;
 299     s->rregs[ESP_TCMID] = 0;
 300     esp_raise_irq(s);
 301 }
 302
 303 static void esp_do_dma(ESPState *s)
 304 {
 305     uint32_t len;
 306     int to_device;
 307
 308     to_device = (s->ti_size < 0);
 309     len = s->dma_left;
 310     if (s->do_cmd) {
 311         DPRINTF("command len %d + %d\n", s->cmdlen, len);
 312         s->dma_memory_read(s->dma_opaque, &s->cmdbuf[s->cmdlen], len);
 313         s->ti_size = 0;
 314         s->cmdlen = 0;
 315         s->do_cmd = 0;
 316         do_cmd(s, s->cmdbuf);
 317         return;
 318     }
 319     if (s->async_len == 0) {
 320         /* Defer until data is available.  */
 321         return;
 322     }
 323     if (len > s->async_len) {
 324         len = s->async_len;
 325     }
 326     if (to_device) {
 327         s->dma_memory_read(s->dma_opaque, s->async_buf, len);
 328     } else {
 329         s->dma_memory_write(s->dma_opaque, s->async_buf, len);
 330     }
 331     s->dma_left -= len;
 332     s->async_buf += len;
 333     s->async_len -= len;
 334     if (to_device)
 335         s->ti_size += len;
 336     else
 337         s->ti_size -= len;
 338     if (s->async_len == 0) {
 339         if (to_device) {
 340             // ti_size is negative
 341             s->current_dev->info->write_data(s->current_dev, 0);
 342         } else {
 343             s->current_dev->info->read_data(s->current_dev, 0);
 344             /* If there is still data to be read from the device then
 345                complete the DMA operation immediately.  Otherwise defer
 346                until the scsi layer has completed.  */
 347             if (s->dma_left == 0 && s->ti_size > 0) {
 348                 esp_dma_done(s);
 349             }
 350         }
 351     } else {
 352         /* Partially filled a scsi buffer. Complete immediately.  */
 353         esp_dma_done(s);
 354     }
 355 }
 356
 357 static void esp_command_complete(SCSIBus *bus, int reason, uint32_t tag,
 358                                  uint32_t arg)
 359 {
 360     ESPState *s = DO_UPCAST(ESPState, busdev.qdev, bus->qbus.parent);
 361
 362     if (reason == SCSI_REASON_DONE) {
 363         DPRINTF("SCSI Command complete\n");
 364         if (s->ti_size != 0)
 365             DPRINTF("SCSI command completed unexpectedly\n");
 366         s->ti_size = 0;
 367         s->dma_left = 0;
 368         s->async_len = 0;
 369         if (arg)
 370             DPRINTF("Command failed\n");
 371         s->sense = arg;
 372         s->rregs[ESP_RSTAT] = STAT_ST;
 373         esp_dma_done(s);
 374         s->current_dev = NULL;
 375     } else {
 376         DPRINTF("transfer %d/%d\n", s->dma_left, s->ti_size);
 377         s->async_len = arg;
 378         s->async_buf = s->current_dev->info->get_buf(s->current_dev, 0);
 379         if (s->dma_left) {
 380             esp_do_dma(s);
 381         } else if (s->dma_counter != 0 && s->ti_size <= 0) {
 382             /* If this was the last part of a DMA transfer then the
 383                completion interrupt is deferred to here.  */
 384             esp_dma_done(s);
 385         }
 386     }
 387 }
 388
 389 static void handle_ti(ESPState *s)
 390 {
 391     uint32_t dmalen, minlen;
 392
 393     dmalen = s->rregs[ESP_TCLO] | (s->rregs[ESP_TCMID] << 8);
 394     if (dmalen==0) {
 395       dmalen=0x10000;
 396     }
 397     s->dma_counter = dmalen;
 398
 399     if (s->do_cmd)
 400         minlen = (dmalen < 32) ? dmalen : 32;
 401     else if (s->ti_size < 0)
 402         minlen = (dmalen < -s->ti_size) ? dmalen : -s->ti_size;
 403     else
 404         minlen = (dmalen < s->ti_size) ? dmalen : s->ti_size;
 405     DPRINTF("Transfer Information len %d\n", minlen);
 406     if (s->dma) {
 407         s->dma_left = minlen;
 408         s->rregs[ESP_RSTAT] &= ~STAT_TC;
 409         esp_do_dma(s);
 410     } else if (s->do_cmd) {
 411         DPRINTF("command len %d\n", s->cmdlen);
 412         s->ti_size = 0;
 413         s->cmdlen = 0;
 414         s->do_cmd = 0;
 415         do_cmd(s, s->cmdbuf);
 416         return;
 417     }
 418 }
 419
 420 static void esp_reset(DeviceState *d)
 421 {
 422     ESPState *s = container_of(d, ESPState, busdev.qdev);
 423
 424     memset(s->rregs, 0, ESP_REGS);
 425     memset(s->wregs, 0, ESP_REGS);
 426     s->rregs[ESP_TCHI] = TCHI_FAS100A; // Indicate fas100a
 427     s->ti_size = 0;
 428     s->ti_rptr = 0;
 429     s->ti_wptr = 0;
 430     s->dma = 0;
 431     s->do_cmd = 0;
 432
 433     s->rregs[ESP_CFG1] = 7;
 434 }
 435
 436 static void parent_esp_reset(void *opaque, int irq, int level)
 437 {
 438     if (level)
 439         esp_reset(opaque);
 440 }
 441
 442 static uint32_t esp_mem_readb(void *opaque, target_phys_addr_t addr)
 443 {
 444     ESPState *s = opaque;
 445     uint32_t saddr, old_val;
 446
 447     saddr = addr >> s->it_shift;
 448     DPRINTF("read reg[%d]: 0x%2.2x\n", saddr, s->rregs[saddr]);
 449     switch (saddr) {
 450     case ESP_FIFO:
 451         if (s->ti_size > 0) {
 452             s->ti_size--;
 453             if ((s->rregs[ESP_RSTAT] & STAT_PIO_MASK) == 0) {
 454                 /* Data out.  */
 455                 ESP_ERROR("PIO data read not implemented\n");
 456                 s->rregs[ESP_FIFO] = 0;
 457             } else {
 458                 s->rregs[ESP_FIFO] = s->ti_buf[s->ti_rptr++];
 459             }
 460             esp_raise_irq(s);
 461         }
 462         if (s->ti_size == 0) {
 463             s->ti_rptr = 0;
 464             s->ti_wptr = 0;
 465         }
 466         break;
 467     case ESP_RINTR:
 468         /* Clear sequence step, interrupt register and all status bits
 469            except TC */
 470         old_val = s->rregs[ESP_RINTR];
 471         s->rregs[ESP_RINTR] = 0;
 472         s->rregs[ESP_RSTAT] &= ~STAT_TC;
 473         s->rregs[ESP_RSEQ] = SEQ_CD;
 474         esp_lower_irq(s);
 475
 476         return old_val;
 477     default:
 478         break;
 479     }
 480     return s->rregs[saddr];
 481 }
 482
 483 static void esp_mem_writeb(void *opaque, target_phys_addr_t addr, uint32_t val)
 484 {
 485     ESPState *s = opaque;
 486     uint32_t saddr;
 487
 488     saddr = addr >> s->it_shift;
 489     DPRINTF("write reg[%d]: 0x%2.2x -> 0x%2.2x\n", saddr, s->wregs[saddr],
 490             val);
 491     switch (saddr) {
 492     case ESP_TCLO:
 493     case ESP_TCMID:
 494         s->rregs[ESP_RSTAT] &= ~STAT_TC;
 495         break;
 496     case ESP_FIFO:
 497         if (s->do_cmd) {
 498             s->cmdbuf[s->cmdlen++] = val & 0xff;
 499         } else if (s->ti_size == TI_BUFSZ - 1) {
 500             ESP_ERROR("fifo overrun\n");
 501         } else {
 502             s->ti_size++;
 503             s->ti_buf[s->ti_wptr++] = val & 0xff;
 504         }
 505         break;
 506     case ESP_CMD:
 507         s->rregs[saddr] = val;
 508         if (val & CMD_DMA) {
 509             s->dma = 1;
 510             /* Reload DMA counter.  */
 511             s->rregs[ESP_TCLO] = s->wregs[ESP_TCLO];
 512             s->rregs[ESP_TCMID] = s->wregs[ESP_TCMID];
 513         } else {
 514             s->dma = 0;
 515         }
 516         switch(val & CMD_CMD) {
 517         case CMD_NOP:
 518             DPRINTF("NOP (%2.2x)\n", val);
 519             break;
 520         case CMD_FLUSH:
 521             DPRINTF("Flush FIFO (%2.2x)\n", val);
 522             //s->ti_size = 0;
 523             s->rregs[ESP_RINTR] = INTR_FC;
 524             s->rregs[ESP_RSEQ] = 0;
 525             s->rregs[ESP_RFLAGS] = 0;
 526             break;
 527         case CMD_RESET:
 528             DPRINTF("Chip reset (%2.2x)\n", val);
 529             esp_reset(&s->busdev.qdev);
 530             break;
 531         case CMD_BUSRESET:
 532             DPRINTF("Bus reset (%2.2x)\n", val);
 533             s->rregs[ESP_RINTR] = INTR_RST;
 534             if (!(s->wregs[ESP_CFG1] & CFG1_RESREPT)) {
 535                 esp_raise_irq(s);
 536             }
 537             break;
 538         case CMD_TI:
 539             handle_ti(s);
 540             break;
 541         case CMD_ICCS:
 542             DPRINTF("Initiator Command Complete Sequence (%2.2x)\n", val);
 543             write_response(s);
 544             s->rregs[ESP_RINTR] = INTR_FC;
 545             s->rregs[ESP_RSTAT] |= STAT_MI;
 546             break;
 547         case CMD_MSGACC:
 548             DPRINTF("Message Accepted (%2.2x)\n", val);
 549             s->rregs[ESP_RINTR] = INTR_DC;
 550             s->rregs[ESP_RSEQ] = 0;
 551             s->rregs[ESP_RFLAGS] = 0;
 552             esp_raise_irq(s);
 553             break;
 554         case CMD_PAD:
 555             DPRINTF("Transfer padding (%2.2x)\n", val);
 556             s->rregs[ESP_RSTAT] = STAT_TC;
 557             s->rregs[ESP_RINTR] = INTR_FC;
 558             s->rregs[ESP_RSEQ] = 0;
 559             break;
 560         case CMD_SATN:
 561             DPRINTF("Set ATN (%2.2x)\n", val);
 562             break;
 563         case CMD_SEL:
 564             DPRINTF("Select without ATN (%2.2x)\n", val);
 565             handle_s_without_atn(s);
 566             break;
 567         case CMD_SELATN:
 568             DPRINTF("Select with ATN (%2.2x)\n", val);
 569             handle_satn(s);
 570             break;
 571         case CMD_SELATNS:
 572             DPRINTF("Select with ATN & stop (%2.2x)\n", val);
 573             handle_satn_stop(s);
 574             break;
 575         case CMD_ENSEL:
 576             DPRINTF("Enable selection (%2.2x)\n", val);
 577             s->rregs[ESP_RINTR] = 0;
 578             break;
 579         default:
 580             ESP_ERROR("Unhandled ESP command (%2.2x)\n", val);
 581             break;
 582         }
 583         break;
 584     case ESP_WBUSID ... ESP_WSYNO:
 585         break;
 586     case ESP_CFG1:
 587         s->rregs[saddr] = val;
 588         break;
 589     case ESP_WCCF ... ESP_WTEST:
 590         break;
 591     case ESP_CFG2 ... ESP_RES4:
 592         s->rregs[saddr] = val;
 593         break;
 594     default:
 595         ESP_ERROR("invalid write of 0x%02x at [0x%x]\n", val, saddr);
 596         return;
 597     }
 598     s->wregs[saddr] = val;
 599 }
 600
 601 static CPUReadMemoryFunc * const esp_mem_read[3] = {
 602     esp_mem_readb,
 603     NULL,
 604     NULL,
 605 };
 606
 607 static CPUWriteMemoryFunc * const esp_mem_write[3] = {
 608     esp_mem_writeb,
 609     NULL,
 610     esp_mem_writeb,
 611 };
 612
 613 static const VMStateDescription vmstate_esp = {
 614     .name ="esp",
 615     .version_id = 3,
 616     .minimum_version_id = 3,
 617     .minimum_version_id_old = 3,
 618     .fields      = (VMStateField []) {
 619         VMSTATE_BUFFER(rregs, ESPState),
 620         VMSTATE_BUFFER(wregs, ESPState),
 621         VMSTATE_INT32(ti_size, ESPState),
 622         VMSTATE_UINT32(ti_rptr, ESPState),
 623         VMSTATE_UINT32(ti_wptr, ESPState),
 624         VMSTATE_BUFFER(ti_buf, ESPState),
 625         VMSTATE_UINT32(sense, ESPState),
 626         VMSTATE_UINT32(dma, ESPState),
 627         VMSTATE_BUFFER(cmdbuf, ESPState),
 628         VMSTATE_UINT32(cmdlen, ESPState),
 629         VMSTATE_UINT32(do_cmd, ESPState),
 630         VMSTATE_UINT32(dma_left, ESPState),
 631         VMSTATE_END_OF_LIST()
 632     }
 633 };
 634
 635 void esp_init(target_phys_addr_t espaddr, int it_shift,
 636               espdma_memory_read_write dma_memory_read,
 637               espdma_memory_read_write dma_memory_write,
 638               void *dma_opaque, qemu_irq irq, qemu_irq *reset)
 639 {
 640     DeviceState *dev;
 641     SysBusDevice *s;
 642     ESPState *esp;
 643
 644     dev = qdev_create(NULL, "esp");
 645     esp = DO_UPCAST(ESPState, busdev.qdev, dev);
 646     esp->dma_memory_read = dma_memory_read;
 647     esp->dma_memory_write = dma_memory_write;
 648     esp->dma_opaque = dma_opaque;
 649     esp->it_shift = it_shift;
 650     qdev_init_nofail(dev);
 651     s = sysbus_from_qdev(dev);
 652     sysbus_connect_irq(s, 0, irq);
 653     sysbus_mmio_map(s, 0, espaddr);
 654     *reset = qdev_get_gpio_in(dev, 0);
 655 }
 656
 657 static int esp_init1(SysBusDevice *dev)
 658 {
 659     ESPState *s = FROM_SYSBUS(ESPState, dev);
 660     int esp_io_memory;
 661
 662     sysbus_init_irq(dev, &s->irq);
 663     assert(s->it_shift != -1);
 664
 665     esp_io_memory = cpu_register_io_memory(esp_mem_read, esp_mem_write, s);
 666     sysbus_init_mmio(dev, ESP_REGS << s->it_shift, esp_io_memory);
 667
 668     qdev_init_gpio_in(&dev->qdev, parent_esp_reset, 1);
 669
 670     scsi_bus_new(&s->bus, &dev->qdev, 0, ESP_MAX_DEVS, esp_command_complete);
 671     scsi_bus_legacy_handle_cmdline(&s->bus);
 672     return 0;
 673 }
 674
 675 static SysBusDeviceInfo esp_info = {
 676     .init = esp_init1,
 677     .qdev.name  = "esp",
 678     .qdev.size  = sizeof(ESPState),
 679     .qdev.vmsd  = &vmstate_esp,
 680     .qdev.reset = esp_reset,
 681     .qdev.props = (Property[]) {
 682         {.name = NULL}
 683     }
 684 };
 685
 686 static void esp_register_devices(void)
 687 {
 688     sysbus_register_withprop(&esp_info);
 689 }
 690
 691 device_init(esp_register_devices)