qmp-commands.hx

   1 HXCOMM QMP dispatch table and documentation
   2 HXCOMM Text between SQMP and EQMP is copied to the QMP documention file and
   3 HXCOMM does not show up in the other formats.
   4
   5 SQMP
   6                         QMP Supported Commands
   7                         ----------------------
   8
   9 This document describes all commands currently supported by QMP.
  10
  11 Most of the time their usage is exactly the same as in the user Monitor, this
  12 means that any other document which also describe commands (the manpage,
  13 QEMU's manual, etc) can and should be consulted.
  14
  15 QMP has two types of commands: regular and query commands. Regular commands
  16 usually change the Virtual Machine's state someway, while query commands just
  17 return information. The sections below are divided accordingly.
  18
  19 It's important to observe that all communication examples are formatted in
  20 a reader-friendly way, so that they're easier to understand. However, in real
  21 protocol usage, they're emitted as a single line.
  22
  23 Also, the following notation is used to denote data flow:
  24
  25 -> data issued by the Client
  26 <- Server data response
  27
  28 Please, refer to the QMP specification (QMP/qmp-spec.txt) for detailed
  29 information on the Server command and response formats.
  30
  31 NOTE: This document is temporary and will be replaced soon.
  32
  33 1. Stability Considerations
  34 ===========================
  35
  36 The current QMP command set (described in this file) may be useful for a
  37 number of use cases, however it's limited and several commands have bad
  38 defined semantics, specially with regard to command completion.
  39
  40 These problems are going to be solved incrementally in the next QEMU releases
  41 and we're going to establish a deprecation policy for badly defined commands.
  42
  43 If you're planning to adopt QMP, please observe the following:
  44
  45     1. The deprecation policy will take effect and be documented soon, please
  46        check the documentation of each used command as soon as a new release of
  47        QEMU is available
  48
  49     2. DO NOT rely on anything which is not explicit documented
  50
  51     3. Errors, in special, are not documented. Applications should NOT check
  52        for specific errors classes or data (it's strongly recommended to only
  53        check for the "error" key)
  54
  55 2. Regular Commands
  56 ===================
  57
  58 Server's responses in the examples below are always a success response, please
  59 refer to the QMP specification for more details on error responses.
  60
  61 EQMP
  62
  63     {
  64         .name       = "quit",
  65         .args_type  = "",
  66         .mhandler.cmd_new = qmp_marshal_input_quit,
  67     },
  68
  69 SQMP
  70 quit
  71 ----
  72
  73 Quit the emulator.
  74
  75 Arguments: None.
  76
  77 Example:
  78
  79 -> { "execute": "quit" }
  80 <- { "return": {} }
  81
  82 EQMP
  83
  84     {
  85         .name       = "eject",
  86         .args_type  = "force:-f,device:B",
  87         .mhandler.cmd_new = qmp_marshal_input_eject,
  88     },
  89
  90 SQMP
  91 eject
  92 -----
  93
  94 Eject a removable medium.
  95
  96 Arguments:
  97
  98 - force: force ejection (json-bool, optional)
  99 - device: device name (json-string)
 100
 101 Example:
 102
 103 -> { "execute": "eject", "arguments": { "device": "ide1-cd0" } }
 104 <- { "return": {} }
 105
 106 Note: The "force" argument defaults to false.
 107
 108 EQMP
 109
 110     {
 111         .name       = "change",
 112         .args_type  = "device:B,target:F,arg:s?",
 113         .mhandler.cmd_new = qmp_marshal_input_change,
 114     },
 115
 116 SQMP
 117 change
 118 ------
 119
 120 Change a removable medium or VNC configuration.
 121
 122 Arguments:
 123
 124 - "device": device name (json-string)
 125 - "target": filename or item (json-string)
 126 - "arg": additional argument (json-string, optional)
 127
 128 Examples:
 129
 130 1. Change a removable medium
 131
 132 -> { "execute": "change",
 133              "arguments": { "device": "ide1-cd0",
 134                             "target": "/srv/images/Fedora-12-x86_64-DVD.iso" } }
 135 <- { "return": {} }
 136
 137 2. Change VNC password
 138
 139 -> { "execute": "change",
 140              "arguments": { "device": "vnc", "target": "password",
 141                             "arg": "foobar1" } }
 142 <- { "return": {} }
 143
 144 EQMP
 145
 146     {
 147         .name       = "screendump",
 148         .args_type  = "filename:F",
 149         .mhandler.cmd_new = qmp_marshal_input_screendump,
 150     },
 151
 152 SQMP
 153 screendump
 154 ----------
 155
 156 Save screen into PPM image.
 157
 158 Arguments:
 159
 160 - "filename": file path (json-string)
 161
 162 Example:
 163
 164 -> { "execute": "screendump", "arguments": { "filename": "/tmp/image" } }
 165 <- { "return": {} }
 166
 167 EQMP
 168
 169     {
 170         .name       = "stop",
 171         .args_type  = "",
 172         .mhandler.cmd_new = qmp_marshal_input_stop,
 173     },
 174
 175 SQMP
 176 stop
 177 ----
 178
 179 Stop the emulator.
 180
 181 Arguments: None.
 182
 183 Example:
 184
 185 -> { "execute": "stop" }
 186 <- { "return": {} }
 187
 188 EQMP
 189
 190     {
 191         .name       = "cont",
 192         .args_type  = "",
 193         .mhandler.cmd_new = qmp_marshal_input_cont,
 194     },
 195
 196 SQMP
 197 cont
 198 ----
 199
 200 Resume emulation.
 201
 202 Arguments: None.
 203
 204 Example:
 205
 206 -> { "execute": "cont" }
 207 <- { "return": {} }
 208
 209 EQMP
 210
 211     {
 212         .name       = "system_wakeup",
 213         .args_type  = "",
 214         .mhandler.cmd_new = qmp_marshal_input_system_wakeup,
 215     },
 216
 217 SQMP
 218 system_wakeup
 219 -------------
 220
 221 Wakeup guest from suspend.
 222
 223 Arguments: None.
 224
 225 Example:
 226
 227 -> { "execute": "system_wakeup" }
 228 <- { "return": {} }
 229
 230 EQMP
 231
 232     {
 233         .name       = "system_reset",
 234         .args_type  = "",
 235         .mhandler.cmd_new = qmp_marshal_input_system_reset,
 236     },
 237
 238 SQMP
 239 system_reset
 240 ------------
 241
 242 Reset the system.
 243
 244 Arguments: None.
 245
 246 Example:
 247
 248 -> { "execute": "system_reset" }
 249 <- { "return": {} }
 250
 251 EQMP
 252
 253     {
 254         .name       = "system_powerdown",
 255         .args_type  = "",
 256         .mhandler.cmd_new = qmp_marshal_input_system_powerdown,
 257     },
 258
 259 SQMP
 260 system_powerdown
 261 ----------------
 262
 263 Send system power down event.
 264
 265 Arguments: None.
 266
 267 Example:
 268
 269 -> { "execute": "system_powerdown" }
 270 <- { "return": {} }
 271
 272 EQMP
 273
 274     {
 275         .name       = "device_add",
 276         .args_type  = "device:O",
 277         .params     = "driver[,prop=value][,...]",
 278         .help       = "add device, like -device on the command line",
 279         .user_print = monitor_user_noop,
 280         .mhandler.cmd_new = do_device_add,
 281     },
 282
 283 SQMP
 284 device_add
 285 ----------
 286
 287 Add a device.
 288
 289 Arguments:
 290
 291 - "driver": the name of the new device's driver (json-string)
 292 - "bus": the device's parent bus (device tree path, json-string, optional)
 293 - "id": the device's ID, must be unique (json-string)
 294 - device properties
 295
 296 Example:
 297
 298 -> { "execute": "device_add", "arguments": { "driver": "e1000", "id": "net1" } }
 299 <- { "return": {} }
 300
 301 Notes:
 302
 303 (1) For detailed information about this command, please refer to the
 304     'docs/qdev-device-use.txt' file.
 305
 306 (2) It's possible to list device properties by running QEMU with the
 307     "-device DEVICE,\?" command-line argument, where DEVICE is the device's name
 308
 309 EQMP
 310
 311     {
 312         .name       = "device_del",
 313         .args_type  = "id:s",
 314         .mhandler.cmd_new = qmp_marshal_input_device_del,
 315     },
 316
 317 SQMP
 318 device_del
 319 ----------
 320
 321 Remove a device.
 322
 323 Arguments:
 324
 325 - "id": the device's ID (json-string)
 326
 327 Example:
 328
 329 -> { "execute": "device_del", "arguments": { "id": "net1" } }
 330 <- { "return": {} }
 331
 332 EQMP
 333
 334     {
 335         .name       = "send-key",
 336         .args_type  = "keys:O,hold-time:i?",
 337         .mhandler.cmd_new = qmp_marshal_input_send_key,
 338     },
 339
 340 SQMP
 341 send-key
 342 ----------
 343
 344 Send keys to VM.
 345
 346 Arguments:
 347
 348 keys array:
 349     - "key": key sequence (a json-array of key union values,
 350              union can be number or qcode enum)
 351
 352 - hold-time: time to delay key up events, milliseconds. Defaults to 100
 353              (json-int, optional)
 354
 355 Example:
 356
 357 -> { "execute": "send-key",
 358      "arguments": { "keys": [ { "type": "qcode", "data": "ctrl" },
 359                               { "type": "qcode", "data": "alt" },
 360                               { "type": "qcode", "data": "delete" } ] } }
 361 <- { "return": {} }
 362
 363 EQMP
 364
 365     {
 366         .name       = "cpu",
 367         .args_type  = "index:i",
 368         .mhandler.cmd_new = qmp_marshal_input_cpu,
 369     },
 370
 371 SQMP
 372 cpu
 373 ---
 374
 375 Set the default CPU.
 376
 377 Arguments:
 378
 379 - "index": the CPU's index (json-int)
 380
 381 Example:
 382
 383 -> { "execute": "cpu", "arguments": { "index": 0 } }
 384 <- { "return": {} }
 385
 386 Note: CPUs' indexes are obtained with the 'query-cpus' command.
 387
 388 EQMP
 389
 390     {
 391         .name       = "cpu-add",
 392         .args_type  = "id:i",
 393         .mhandler.cmd_new = qmp_marshal_input_cpu_add,
 394     },
 395
 396 SQMP
 397 cpu-add
 398 -------
 399
 400 Adds virtual cpu
 401
 402 Arguments:
 403
 404 - "id": cpu id (json-int)
 405
 406 Example:
 407
 408 -> { "execute": "cpu-add", "arguments": { "id": 2 } }
 409 <- { "return": {} }
 410
 411 EQMP
 412
 413     {
 414         .name       = "memsave",
 415         .args_type  = "val:l,size:i,filename:s,cpu:i?",
 416         .mhandler.cmd_new = qmp_marshal_input_memsave,
 417     },
 418
 419 SQMP
 420 memsave
 421 -------
 422
 423 Save to disk virtual memory dump starting at 'val' of size 'size'.
 424
 425 Arguments:
 426
 427 - "val": the starting address (json-int)
 428 - "size": the memory size, in bytes (json-int)
 429 - "filename": file path (json-string)
 430 - "cpu": virtual CPU index (json-int, optional)
 431
 432 Example:
 433
 434 -> { "execute": "memsave",
 435              "arguments": { "val": 10,
 436                             "size": 100,
 437                             "filename": "/tmp/virtual-mem-dump" } }
 438 <- { "return": {} }
 439
 440 EQMP
 441
 442     {
 443         .name       = "pmemsave",
 444         .args_type  = "val:l,size:i,filename:s",
 445         .mhandler.cmd_new = qmp_marshal_input_pmemsave,
 446     },
 447
 448 SQMP
 449 pmemsave
 450 --------
 451
 452 Save to disk physical memory dump starting at 'val' of size 'size'.
 453
 454 Arguments:
 455
 456 - "val": the starting address (json-int)
 457 - "size": the memory size, in bytes (json-int)
 458 - "filename": file path (json-string)
 459
 460 Example:
 461
 462 -> { "execute": "pmemsave",
 463              "arguments": { "val": 10,
 464                             "size": 100,
 465                             "filename": "/tmp/physical-mem-dump" } }
 466 <- { "return": {} }
 467
 468 EQMP
 469
 470     {
 471         .name       = "inject-nmi",
 472         .args_type  = "",
 473         .mhandler.cmd_new = qmp_marshal_input_inject_nmi,
 474     },
 475
 476 SQMP
 477 inject-nmi
 478 ----------
 479
 480 Inject an NMI on the default CPU (x86/s390) or all CPUs (ppc64).
 481
 482 Arguments: None.
 483
 484 Example:
 485
 486 -> { "execute": "inject-nmi" }
 487 <- { "return": {} }
 488
 489 Note: inject-nmi fails when the guest doesn't support injecting.
 490
 491 EQMP
 492
 493     {
 494         .name       = "ringbuf-write",
 495         .args_type  = "device:s,data:s,format:s?",
 496         .mhandler.cmd_new = qmp_marshal_input_ringbuf_write,
 497     },
 498
 499 SQMP
 500 ringbuf-write
 501 -------------
 502
 503 Write to a ring buffer character device.
 504
 505 Arguments:
 506
 507 - "device": ring buffer character device name (json-string)
 508 - "data": data to write (json-string)
 509 - "format": data format (json-string, optional)
 510           - Possible values: "utf8" (default), "base64"
 511             Bug: invalid base64 is currently not rejected.
 512             Whitespace *is* invalid.
 513
 514 Example:
 515
 516 -> { "execute": "ringbuf-write",
 517                 "arguments": { "device": "foo",
 518                                "data": "abcdefgh",
 519                                "format": "utf8" } }
 520 <- { "return": {} }
 521
 522 EQMP
 523
 524     {
 525         .name       = "ringbuf-read",
 526         .args_type  = "device:s,size:i,format:s?",
 527         .mhandler.cmd_new = qmp_marshal_input_ringbuf_read,
 528     },
 529
 530 SQMP
 531 ringbuf-read
 532 -------------
 533
 534 Read from a ring buffer character device.
 535
 536 Arguments:
 537
 538 - "device": ring buffer character device name (json-string)
 539 - "size": how many bytes to read at most (json-int)
 540           - Number of data bytes, not number of characters in encoded data
 541 - "format": data format (json-string, optional)
 542           - Possible values: "utf8" (default), "base64"
 543           - Naturally, format "utf8" works only when the ring buffer
 544             contains valid UTF-8 text.  Invalid UTF-8 sequences get
 545             replaced.  Bug: replacement doesn't work.  Bug: can screw
 546             up on encountering NUL characters, after the ring buffer
 547             lost data, and when reading stops because the size limit
 548             is reached.
 549
 550 Example:
 551
 552 -> { "execute": "ringbuf-read",
 553                 "arguments": { "device": "foo",
 554                                "size": 1000,
 555                                "format": "utf8" } }
 556 <- {"return": "abcdefgh"}
 557
 558 EQMP
 559
 560     {
 561         .name       = "xen-save-devices-state",
 562         .args_type  = "filename:F",
 563     .mhandler.cmd_new = qmp_marshal_input_xen_save_devices_state,
 564     },
 565
 566 SQMP
 567 xen-save-devices-state
 568 -------
 569
 570 Save the state of all devices to file. The RAM and the block devices
 571 of the VM are not saved by this command.
 572
 573 Arguments:
 574
 575 - "filename": the file to save the state of the devices to as binary
 576 data. See xen-save-devices-state.txt for a description of the binary
 577 format.
 578
 579 Example:
 580
 581 -> { "execute": "xen-save-devices-state",
 582      "arguments": { "filename": "/tmp/save" } }
 583 <- { "return": {} }
 584
 585 EQMP
 586
 587     {
 588         .name       = "xen-set-global-dirty-log",
 589         .args_type  = "enable:b",
 590         .mhandler.cmd_new = qmp_marshal_input_xen_set_global_dirty_log,
 591     },
 592
 593 SQMP
 594 xen-set-global-dirty-log
 595 -------
 596
 597 Enable or disable the global dirty log mode.
 598
 599 Arguments:
 600
 601 - "enable": Enable it or disable it.
 602
 603 Example:
 604
 605 -> { "execute": "xen-set-global-dirty-log",
 606      "arguments": { "enable": true } }
 607 <- { "return": {} }
 608
 609 EQMP
 610
 611     {
 612         .name       = "migrate",
 613         .args_type  = "detach:-d,blk:-b,inc:-i,uri:s",
 614         .mhandler.cmd_new = qmp_marshal_input_migrate,
 615     },
 616
 617 SQMP
 618 migrate
 619 -------
 620
 621 Migrate to URI.
 622
 623 Arguments:
 624
 625 - "blk": block migration, full disk copy (json-bool, optional)
 626 - "inc": incremental disk copy (json-bool, optional)
 627 - "uri": Destination URI (json-string)
 628
 629 Example:
 630
 631 -> { "execute": "migrate", "arguments": { "uri": "tcp:0:4446" } }
 632 <- { "return": {} }
 633
 634 Notes:
 635
 636 (1) The 'query-migrate' command should be used to check migration's progress
 637     and final result (this information is provided by the 'status' member)
 638 (2) All boolean arguments default to false
 639 (3) The user Monitor's "detach" argument is invalid in QMP and should not
 640     be used
 641
 642 EQMP
 643
 644     {
 645         .name       = "migrate_cancel",
 646         .args_type  = "",
 647         .mhandler.cmd_new = qmp_marshal_input_migrate_cancel,
 648     },
 649
 650 SQMP
 651 migrate_cancel
 652 --------------
 653
 654 Cancel the current migration.
 655
 656 Arguments: None.
 657
 658 Example:
 659
 660 -> { "execute": "migrate_cancel" }
 661 <- { "return": {} }
 662
 663 EQMP
 664 {
 665         .name       = "migrate-set-cache-size",
 666         .args_type  = "value:o",
 667         .mhandler.cmd_new = qmp_marshal_input_migrate_set_cache_size,
 668     },
 669
 670 SQMP
 671 migrate-set-cache-size
 672 ----------------------
 673
 674 Set cache size to be used by XBZRLE migration, the cache size will be rounded
 675 down to the nearest power of 2
 676
 677 Arguments:
 678
 679 - "value": cache size in bytes (json-int)
 680
 681 Example:
 682
 683 -> { "execute": "migrate-set-cache-size", "arguments": { "value": 536870912 } }
 684 <- { "return": {} }
 685
 686 EQMP
 687     {
 688         .name       = "query-migrate-cache-size",
 689         .args_type  = "",
 690         .mhandler.cmd_new = qmp_marshal_input_query_migrate_cache_size,
 691     },
 692
 693 SQMP
 694 query-migrate-cache-size
 695 ------------------------
 696
 697 Show cache size to be used by XBZRLE migration
 698
 699 returns a json-object with the following information:
 700 - "size" : json-int
 701
 702 Example:
 703
 704 -> { "execute": "query-migrate-cache-size" }
 705 <- { "return": 67108864 }
 706
 707 EQMP
 708
 709     {
 710         .name       = "migrate_set_speed",
 711         .args_type  = "value:o",
 712         .mhandler.cmd_new = qmp_marshal_input_migrate_set_speed,
 713     },
 714
 715 SQMP
 716 migrate_set_speed
 717 -----------------
 718
 719 Set maximum speed for migrations.
 720
 721 Arguments:
 722
 723 - "value": maximum speed, in bytes per second (json-int)
 724
 725 Example:
 726
 727 -> { "execute": "migrate_set_speed", "arguments": { "value": 1024 } }
 728 <- { "return": {} }
 729
 730 EQMP
 731
 732     {
 733         .name       = "migrate_set_downtime",
 734         .args_type  = "value:T",
 735         .mhandler.cmd_new = qmp_marshal_input_migrate_set_downtime,
 736     },
 737
 738 SQMP
 739 migrate_set_downtime
 740 --------------------
 741
 742 Set maximum tolerated downtime (in seconds) for migrations.
 743
 744 Arguments:
 745
 746 - "value": maximum downtime (json-number)
 747
 748 Example:
 749
 750 -> { "execute": "migrate_set_downtime", "arguments": { "value": 0.1 } }
 751 <- { "return": {} }
 752
 753 EQMP
 754
 755     {
 756         .name       = "client_migrate_info",
 757         .args_type  = "protocol:s,hostname:s,port:i?,tls-port:i?,cert-subject:s?",
 758         .params     = "protocol hostname port tls-port cert-subject",
 759         .help       = "send migration info to spice/vnc client",
 760         .user_print = monitor_user_noop,
 761         .mhandler.cmd_async = client_migrate_info,
 762         .flags      = MONITOR_CMD_ASYNC,
 763     },
 764
 765 SQMP
 766 client_migrate_info
 767 ------------------
 768
 769 Set the spice/vnc connection info for the migration target.  The spice/vnc
 770 server will ask the spice/vnc client to automatically reconnect using the
 771 new parameters (if specified) once the vm migration finished successfully.
 772
 773 Arguments:
 774
 775 - "protocol":     protocol: "spice" or "vnc" (json-string)
 776 - "hostname":     migration target hostname (json-string)
 777 - "port":         spice/vnc tcp port for plaintext channels (json-int, optional)
 778 - "tls-port":     spice tcp port for tls-secured channels (json-int, optional)
 779 - "cert-subject": server certificate subject (json-string, optional)
 780
 781 Example:
 782
 783 -> { "execute": "client_migrate_info",
 784      "arguments": { "protocol": "spice",
 785                     "hostname": "virt42.lab.kraxel.org",
 786                     "port": 1234 } }
 787 <- { "return": {} }
 788
 789 EQMP
 790
 791     {
 792         .name       = "dump-guest-memory",
 793         .args_type  = "paging:b,protocol:s,begin:i?,end:i?,format:s?",
 794         .params     = "-p protocol [begin] [length] [format]",
 795         .help       = "dump guest memory to file",
 796         .user_print = monitor_user_noop,
 797         .mhandler.cmd_new = qmp_marshal_input_dump_guest_memory,
 798     },
 799
 800 SQMP
 801 dump
 802
 803
 804 Dump guest memory to file. The file can be processed with crash or gdb.
 805
 806 Arguments:
 807
 808 - "paging": do paging to get guest's memory mapping (json-bool)
 809 - "protocol": destination file(started with "file:") or destination file
 810               descriptor (started with "fd:") (json-string)
 811 - "begin": the starting physical address. It's optional, and should be specified
 812            with length together (json-int)
 813 - "length": the memory size, in bytes. It's optional, and should be specified
 814             with begin together (json-int)
 815 - "format": the format of guest memory dump. It's optional, and can be
 816             elf|kdump-zlib|kdump-lzo|kdump-snappy, but non-elf formats will
 817             conflict with paging and filter, ie. begin and length (json-string)
 818
 819 Example:
 820
 821 -> { "execute": "dump-guest-memory", "arguments": { "protocol": "fd:dump" } }
 822 <- { "return": {} }
 823
 824 Notes:
 825
 826 (1) All boolean arguments default to false
 827
 828 EQMP
 829
 830     {
 831         .name       = "query-dump-guest-memory-capability",
 832         .args_type  = "",
 833     .mhandler.cmd_new = qmp_marshal_input_query_dump_guest_memory_capability,
 834     },
 835
 836 SQMP
 837 query-dump-guest-memory-capability
 838 ----------
 839
 840 Show available formats for 'dump-guest-memory'
 841
 842 Example:
 843
 844 -> { "execute": "query-dump-guest-memory-capability" }
 845 <- { "return": { "formats":
 846                     ["elf", "kdump-zlib", "kdump-lzo", "kdump-snappy"] }
 847
 848 EQMP
 849
 850     {
 851         .name       = "netdev_add",
 852         .args_type  = "netdev:O",
 853         .mhandler.cmd_new = qmp_netdev_add,
 854     },
 855
 856 SQMP
 857 netdev_add
 858 ----------
 859
 860 Add host network device.
 861
 862 Arguments:
 863
 864 - "type": the device type, "tap", "user", ... (json-string)
 865 - "id": the device's ID, must be unique (json-string)
 866 - device options
 867
 868 Example:
 869
 870 -> { "execute": "netdev_add", "arguments": { "type": "user", "id": "netdev1" } }
 871 <- { "return": {} }
 872
 873 Note: The supported device options are the same ones supported by the '-netdev'
 874       command-line argument, which are listed in the '-help' output or QEMU's
 875       manual
 876
 877 EQMP
 878
 879     {
 880         .name       = "netdev_del",
 881         .args_type  = "id:s",
 882         .mhandler.cmd_new = qmp_marshal_input_netdev_del,
 883     },
 884
 885 SQMP
 886 netdev_del
 887 ----------
 888
 889 Remove host network device.
 890
 891 Arguments:
 892
 893 - "id": the device's ID, must be unique (json-string)
 894
 895 Example:
 896
 897 -> { "execute": "netdev_del", "arguments": { "id": "netdev1" } }
 898 <- { "return": {} }
 899
 900
 901 EQMP
 902
 903     {
 904         .name       = "object-add",
 905         .args_type  = "qom-type:s,id:s,props:q?",
 906         .mhandler.cmd_new = qmp_object_add,
 907     },
 908
 909 SQMP
 910 object-add
 911 ----------
 912
 913 Create QOM object.
 914
 915 Arguments:
 916
 917 - "qom-type": the object's QOM type, i.e. the class name (json-string)
 918 - "id": the object's ID, must be unique (json-string)
 919 - "props": a dictionary of object property values (optional, json-dict)
 920
 921 Example:
 922
 923 -> { "execute": "object-add", "arguments": { "qom-type": "rng-random", "id": "rng1",
 924      "props": { "filename": "/dev/hwrng" } } }
 925 <- { "return": {} }
 926
 927 EQMP
 928
 929     {
 930         .name       = "object-del",
 931         .args_type  = "id:s",
 932         .mhandler.cmd_new = qmp_marshal_input_object_del,
 933     },
 934
 935 SQMP
 936 object-del
 937 ----------
 938
 939 Remove QOM object.
 940
 941 Arguments:
 942
 943 - "id": the object's ID (json-string)
 944
 945 Example:
 946
 947 -> { "execute": "object-del", "arguments": { "id": "rng1" } }
 948 <- { "return": {} }
 949
 950
 951 EQMP
 952
 953
 954     {
 955         .name       = "block_resize",
 956         .args_type  = "device:s?,node-name:s?,size:o",
 957         .mhandler.cmd_new = qmp_marshal_input_block_resize,
 958     },
 959
 960 SQMP
 961 block_resize
 962 ------------
 963
 964 Resize a block image while a guest is running.
 965
 966 Arguments:
 967
 968 - "device": the device's ID, must be unique (json-string)
 969 - "node-name": the node name in the block driver state graph (json-string)
 970 - "size": new size
 971
 972 Example:
 973
 974 -> { "execute": "block_resize", "arguments": { "device": "scratch", "size": 1073741824 } }
 975 <- { "return": {} }
 976
 977 EQMP
 978
 979     {
 980         .name       = "block-stream",
 981         .args_type  = "device:B,base:s?,speed:o?,backing-file:s?,on-error:s?",
 982         .mhandler.cmd_new = qmp_marshal_input_block_stream,
 983     },
 984
 985     {
 986         .name       = "block-commit",
 987         .args_type  = "device:B,base:s?,top:s?,backing-file:s?,speed:o?",
 988         .mhandler.cmd_new = qmp_marshal_input_block_commit,
 989     },
 990
 991 SQMP
 992 block-commit
 993 ------------
 994
 995 Live commit of data from overlay image nodes into backing nodes - i.e., writes
 996 data between 'top' and 'base' into 'base'.
 997
 998 Arguments:
 999
1000 - "device": The device's ID, must be unique (json-string)
1001 - "base": The file name of the backing image to write data into.
1002           If not specified, this is the deepest backing image
1003           (json-string, optional)
1004 - "top":  The file name of the backing image within the image chain,
1005           which contains the topmost data to be committed down. If
1006           not specified, this is the active layer. (json-string, optional)
1007
1008 - backing-file:     The backing file string to write into the overlay
1009                     image of 'top'.  If 'top' is the active layer,
1010                     specifying a backing file string is an error. This
1011                     filename is not validated.
1012
1013                     If a pathname string is such that it cannot be
1014                     resolved by QEMU, that means that subsequent QMP or
1015                     HMP commands must use node-names for the image in
1016                     question, as filename lookup methods will fail.
1017
1018                     If not specified, QEMU will automatically determine
1019                     the backing file string to use, or error out if
1020                     there is no obvious choice. Care should be taken
1021                     when specifying the string, to specify a valid
1022                     filename or protocol.
1023                     (json-string, optional) (Since 2.1)
1024
1025           If top == base, that is an error.
1026           If top == active, the job will not be completed by itself,
1027           user needs to complete the job with the block-job-complete
1028           command after getting the ready event. (Since 2.0)
1029
1030           If the base image is smaller than top, then the base image
1031           will be resized to be the same size as top.  If top is
1032           smaller than the base image, the base will not be
1033           truncated.  If you want the base image size to match the
1034           size of the smaller top, you can safely truncate it
1035           yourself once the commit operation successfully completes.
1036           (json-string)
1037 - "speed":  the maximum speed, in bytes per second (json-int, optional)
1038
1039
1040 Example:
1041
1042 -> { "execute": "block-commit", "arguments": { "device": "virtio0",
1043                                               "top": "/tmp/snap1.qcow2" } }
1044 <- { "return": {} }
1045
1046 EQMP
1047
1048     {
1049         .name       = "drive-backup",
1050         .args_type  = "sync:s,device:B,target:s,speed:i?,mode:s?,format:s?,"
1051                       "on-source-error:s?,on-target-error:s?",
1052         .mhandler.cmd_new = qmp_marshal_input_drive_backup,
1053     },
1054
1055 SQMP
1056 drive-backup
1057 ------------
1058
1059 Start a point-in-time copy of a block device to a new destination.  The
1060 status of ongoing drive-backup operations can be checked with
1061 query-block-jobs where the BlockJobInfo.type field has the value 'backup'.
1062 The operation can be stopped before it has completed using the
1063 block-job-cancel command.
1064
1065 Arguments:
1066
1067 - "device": the name of the device which should be copied.
1068             (json-string)
1069 - "target": the target of the new image. If the file exists, or if it is a
1070             device, the existing file/device will be used as the new
1071             destination.  If it does not exist, a new file will be created.
1072             (json-string)
1073 - "format": the format of the new destination, default is to probe if 'mode' is
1074             'existing', else the format of the source
1075             (json-string, optional)
1076 - "sync": what parts of the disk image should be copied to the destination;
1077   possibilities include "full" for all the disk, "top" for only the sectors
1078   allocated in the topmost image, or "none" to only replicate new I/O
1079   (MirrorSyncMode).
1080 - "mode": whether and how QEMU should create a new image
1081           (NewImageMode, optional, default 'absolute-paths')
1082 - "speed": the maximum speed, in bytes per second (json-int, optional)
1083 - "on-source-error": the action to take on an error on the source, default
1084                      'report'.  'stop' and 'enospc' can only be used
1085                      if the block device supports io-status.
1086                      (BlockdevOnError, optional)
1087 - "on-target-error": the action to take on an error on the target, default
1088                      'report' (no limitations, since this applies to
1089                      a different block device than device).
1090                      (BlockdevOnError, optional)
1091
1092 Example:
1093 -> { "execute": "drive-backup", "arguments": { "device": "drive0",
1094                                                "sync": "full",
1095                                                "target": "backup.img" } }
1096 <- { "return": {} }
1097 EQMP
1098
1099     {
1100         .name       = "block-job-set-speed",
1101         .args_type  = "device:B,speed:o",
1102         .mhandler.cmd_new = qmp_marshal_input_block_job_set_speed,
1103     },
1104
1105     {
1106         .name       = "block-job-cancel",
1107         .args_type  = "device:B,force:b?",
1108         .mhandler.cmd_new = qmp_marshal_input_block_job_cancel,
1109     },
1110     {
1111         .name       = "block-job-pause",
1112         .args_type  = "device:B",
1113         .mhandler.cmd_new = qmp_marshal_input_block_job_pause,
1114     },
1115     {
1116         .name       = "block-job-resume",
1117         .args_type  = "device:B",
1118         .mhandler.cmd_new = qmp_marshal_input_block_job_resume,
1119     },
1120     {
1121         .name       = "block-job-complete",
1122         .args_type  = "device:B",
1123         .mhandler.cmd_new = qmp_marshal_input_block_job_complete,
1124     },
1125     {
1126         .name       = "transaction",
1127         .args_type  = "actions:q",
1128         .mhandler.cmd_new = qmp_marshal_input_transaction,
1129     },
1130
1131 SQMP
1132 transaction
1133 -----------
1134
1135 Atomically operate on one or more block devices.  The only supported operations
1136 for now are drive-backup, internal and external snapshotting.  A list of
1137 dictionaries is accepted, that contains the actions to be performed.
1138 If there is any failure performing any of the operations, all operations
1139 for the group are abandoned.
1140
1141 For external snapshots, the dictionary contains the device, the file to use for
1142 the new snapshot, and the format.  The default format, if not specified, is
1143 qcow2.
1144
1145 Each new snapshot defaults to being created by QEMU (wiping any
1146 contents if the file already exists), but it is also possible to reuse
1147 an externally-created file.  In the latter case, you should ensure that
1148 the new image file has the same contents as the current one; QEMU cannot
1149 perform any meaningful check.  Typically this is achieved by using the
1150 current image file as the backing file for the new image.
1151
1152 On failure, the original disks pre-snapshot attempt will be used.
1153
1154 For internal snapshots, the dictionary contains the device and the snapshot's
1155 name.  If an internal snapshot matching name already exists, the request will
1156 be rejected.  Only some image formats support it, for example, qcow2, rbd,
1157 and sheepdog.
1158
1159 On failure, qemu will try delete the newly created internal snapshot in the
1160 transaction.  When an I/O error occurs during deletion, the user needs to fix
1161 it later with qemu-img or other command.
1162
1163 Arguments:
1164
1165 actions array:
1166     - "type": the operation to perform.  The only supported
1167       value is "blockdev-snapshot-sync". (json-string)
1168     - "data": a dictionary.  The contents depend on the value
1169       of "type".  When "type" is "blockdev-snapshot-sync":
1170       - "device": device name to snapshot (json-string)
1171       - "node-name": graph node name to snapshot (json-string)
1172       - "snapshot-file": name of new image file (json-string)
1173       - "snapshot-node-name": graph node name of the new snapshot (json-string)
1174       - "format": format of new image (json-string, optional)
1175       - "mode": whether and how QEMU should create the snapshot file
1176         (NewImageMode, optional, default "absolute-paths")
1177       When "type" is "blockdev-snapshot-internal-sync":
1178       - "device": device name to snapshot (json-string)
1179       - "name": name of the new snapshot (json-string)
1180
1181 Example:
1182
1183 -> { "execute": "transaction",
1184      "arguments": { "actions": [
1185          { "type": "blockdev-snapshot-sync", "data" : { "device": "ide-hd0",
1186                                          "snapshot-file": "/some/place/my-image",
1187                                          "format": "qcow2" } },
1188          { "type": "blockdev-snapshot-sync", "data" : { "node-name": "myfile",
1189                                          "snapshot-file": "/some/place/my-image2",
1190                                          "snapshot-node-name": "node3432",
1191                                          "mode": "existing",
1192                                          "format": "qcow2" } },
1193          { "type": "blockdev-snapshot-sync", "data" : { "device": "ide-hd1",
1194                                          "snapshot-file": "/some/place/my-image2",
1195                                          "mode": "existing",
1196                                          "format": "qcow2" } },
1197          { "type": "blockdev-snapshot-internal-sync", "data" : {
1198                                          "device": "ide-hd2",
1199                                          "name": "snapshot0" } } ] } }
1200 <- { "return": {} }
1201
1202 EQMP
1203
1204     {
1205         .name       = "blockdev-snapshot-sync",
1206         .args_type  = "device:s?,node-name:s?,snapshot-file:s,snapshot-node-name:s?,format:s?,mode:s?",
1207         .mhandler.cmd_new = qmp_marshal_input_blockdev_snapshot_sync,
1208     },
1209
1210 SQMP
1211 blockdev-snapshot-sync
1212 ----------------------
1213
1214 Synchronous snapshot of a block device. snapshot-file specifies the
1215 target of the new image. If the file exists, or if it is a device, the
1216 snapshot will be created in the existing file/device. If does not
1217 exist, a new file will be created. format specifies the format of the
1218 snapshot image, default is qcow2.
1219
1220 Arguments:
1221
1222 - "device": device name to snapshot (json-string)
1223 - "node-name": graph node name to snapshot (json-string)
1224 - "snapshot-file": name of new image file (json-string)
1225 - "snapshot-node-name": graph node name of the new snapshot (json-string)
1226 - "mode": whether and how QEMU should create the snapshot file
1227   (NewImageMode, optional, default "absolute-paths")
1228 - "format": format of new image (json-string, optional)
1229
1230 Example:
1231
1232 -> { "execute": "blockdev-snapshot-sync", "arguments": { "device": "ide-hd0",
1233                                                          "snapshot-file":
1234                                                         "/some/place/my-image",
1235                                                         "format": "qcow2" } }
1236 <- { "return": {} }
1237
1238 EQMP
1239
1240     {
1241         .name       = "blockdev-snapshot-internal-sync",
1242         .args_type  = "device:B,name:s",
1243         .mhandler.cmd_new = qmp_marshal_input_blockdev_snapshot_internal_sync,
1244     },
1245
1246 SQMP
1247 blockdev-snapshot-internal-sync
1248 -------------------------------
1249
1250 Synchronously take an internal snapshot of a block device when the format of
1251 image used supports it.  If the name is an empty string, or a snapshot with
1252 name already exists, the operation will fail.
1253
1254 Arguments:
1255
1256 - "device": device name to snapshot (json-string)
1257 - "name": name of the new snapshot (json-string)
1258
1259 Example:
1260
1261 -> { "execute": "blockdev-snapshot-internal-sync",
1262                 "arguments": { "device": "ide-hd0",
1263                                "name": "snapshot0" }
1264    }
1265 <- { "return": {} }
1266
1267 EQMP
1268
1269     {
1270         .name       = "blockdev-snapshot-delete-internal-sync",
1271         .args_type  = "device:B,id:s?,name:s?",
1272         .mhandler.cmd_new =
1273                       qmp_marshal_input_blockdev_snapshot_delete_internal_sync,
1274     },
1275
1276 SQMP
1277 blockdev-snapshot-delete-internal-sync
1278 --------------------------------------
1279
1280 Synchronously delete an internal snapshot of a block device when the format of
1281 image used supports it.  The snapshot is identified by name or id or both.  One
1282 of name or id is required.  If the snapshot is not found, the operation will
1283 fail.
1284
1285 Arguments:
1286
1287 - "device": device name (json-string)
1288 - "id": ID of the snapshot (json-string, optional)
1289 - "name": name of the snapshot (json-string, optional)
1290
1291 Example:
1292
1293 -> { "execute": "blockdev-snapshot-delete-internal-sync",
1294                 "arguments": { "device": "ide-hd0",
1295                                "name": "snapshot0" }
1296    }
1297 <- { "return": {
1298                    "id": "1",
1299                    "name": "snapshot0",
1300                    "vm-state-size": 0,
1301                    "date-sec": 1000012,
1302                    "date-nsec": 10,
1303                    "vm-clock-sec": 100,
1304                    "vm-clock-nsec": 20
1305      }
1306    }
1307
1308 EQMP
1309
1310     {
1311         .name       = "drive-mirror",
1312         .args_type  = "sync:s,device:B,target:s,speed:i?,mode:s?,format:s?,"
1313                       "node-name:s?,replaces:s?,"
1314                       "on-source-error:s?,on-target-error:s?,"
1315                       "granularity:i?,buf-size:i?",
1316         .mhandler.cmd_new = qmp_marshal_input_drive_mirror,
1317     },
1318
1319 SQMP
1320 drive-mirror
1321 ------------
1322
1323 Start mirroring a block device's writes to a new destination. target
1324 specifies the target of the new image. If the file exists, or if it is
1325 a device, it will be used as the new destination for writes. If it does not
1326 exist, a new file will be created. format specifies the format of the
1327 mirror image, default is to probe if mode='existing', else the format
1328 of the source.
1329
1330 Arguments:
1331
1332 - "device": device name to operate on (json-string)
1333 - "target": name of new image file (json-string)
1334 - "format": format of new image (json-string, optional)
1335 - "node-name": the name of the new block driver state in the node graph
1336                (json-string, optional)
1337 - "replaces": the block driver node name to replace when finished
1338               (json-string, optional)
1339 - "mode": how an image file should be created into the target
1340   file/device (NewImageMode, optional, default 'absolute-paths')
1341 - "speed": maximum speed of the streaming job, in bytes per second
1342   (json-int)
1343 - "granularity": granularity of the dirty bitmap, in bytes (json-int, optional)
1344 - "buf_size": maximum amount of data in flight from source to target, in bytes
1345   (json-int, default 10M)
1346 - "sync": what parts of the disk image should be copied to the destination;
1347   possibilities include "full" for all the disk, "top" for only the sectors
1348   allocated in the topmost image, or "none" to only replicate new I/O
1349   (MirrorSyncMode).
1350 - "on-source-error": the action to take on an error on the source
1351   (BlockdevOnError, default 'report')
1352 - "on-target-error": the action to take on an error on the target
1353   (BlockdevOnError, default 'report')
1354
1355 The default value of the granularity is the image cluster size clamped
1356 between 4096 and 65536, if the image format defines one.  If the format
1357 does not define a cluster size, the default value of the granularity
1358 is 65536.
1359
1360
1361 Example:
1362
1363 -> { "execute": "drive-mirror", "arguments": { "device": "ide-hd0",
1364                                                "target": "/some/place/my-image",
1365                                                "sync": "full",
1366                                                "format": "qcow2" } }
1367 <- { "return": {} }
1368
1369 EQMP
1370
1371     {
1372         .name       = "change-backing-file",
1373         .args_type  = "device:s,image-node-name:s,backing-file:s",
1374         .mhandler.cmd_new = qmp_marshal_input_change_backing_file,
1375     },
1376
1377 SQMP
1378 change-backing-file
1379 -------------------
1380 Since: 2.1
1381
1382 Change the backing file in the image file metadata.  This does not cause
1383 QEMU to reopen the image file to reparse the backing filename (it may,
1384 however, perform a reopen to change permissions from r/o -> r/w -> r/o,
1385 if needed). The new backing file string is written into the image file
1386 metadata, and the QEMU internal strings are updated.
1387
1388 Arguments:
1389
1390 - "image-node-name":    The name of the block driver state node of the
1391                         image to modify.  The "device" is argument is used to
1392                         verify "image-node-name" is in the chain described by
1393                         "device".
1394                         (json-string, optional)
1395
1396 - "device":             The name of the device.
1397                         (json-string)
1398
1399 - "backing-file":       The string to write as the backing file.  This string is
1400                         not validated, so care should be taken when specifying
1401                         the string or the image chain may not be able to be
1402                         reopened again.
1403                         (json-string)
1404
1405 Returns: Nothing on success
1406          If "device" does not exist or cannot be determined, DeviceNotFound
1407
1408 EQMP
1409
1410     {
1411         .name       = "balloon",
1412         .args_type  = "value:M",
1413         .mhandler.cmd_new = qmp_marshal_input_balloon,
1414     },
1415
1416 SQMP
1417 balloon
1418 -------
1419
1420 Request VM to change its memory allocation (in bytes).
1421
1422 Arguments:
1423
1424 - "value": New memory allocation (json-int)
1425
1426 Example:
1427
1428 -> { "execute": "balloon", "arguments": { "value": 536870912 } }
1429 <- { "return": {} }
1430
1431 EQMP
1432
1433     {
1434         .name       = "set_link",
1435         .args_type  = "name:s,up:b",
1436         .mhandler.cmd_new = qmp_marshal_input_set_link,
1437     },
1438
1439 SQMP
1440 set_link
1441 --------
1442
1443 Change the link status of a network adapter.
1444
1445 Arguments:
1446
1447 - "name": network device name (json-string)
1448 - "up": status is up (json-bool)
1449
1450 Example:
1451
1452 -> { "execute": "set_link", "arguments": { "name": "e1000.0", "up": false } }
1453 <- { "return": {} }
1454
1455 EQMP
1456
1457     {
1458         .name       = "getfd",
1459         .args_type  = "fdname:s",
1460         .params     = "getfd name",
1461         .help       = "receive a file descriptor via SCM rights and assign it a name",
1462         .mhandler.cmd_new = qmp_marshal_input_getfd,
1463     },
1464
1465 SQMP
1466 getfd
1467 -----
1468
1469 Receive a file descriptor via SCM rights and assign it a name.
1470
1471 Arguments:
1472
1473 - "fdname": file descriptor name (json-string)
1474
1475 Example:
1476
1477 -> { "execute": "getfd", "arguments": { "fdname": "fd1" } }
1478 <- { "return": {} }
1479
1480 Notes:
1481
1482 (1) If the name specified by the "fdname" argument already exists,
1483     the file descriptor assigned to it will be closed and replaced
1484     by the received file descriptor.
1485 (2) The 'closefd' command can be used to explicitly close the file
1486     descriptor when it is no longer needed.
1487
1488 EQMP
1489
1490     {
1491         .name       = "closefd",
1492         .args_type  = "fdname:s",
1493         .params     = "closefd name",
1494         .help       = "close a file descriptor previously passed via SCM rights",
1495         .mhandler.cmd_new = qmp_marshal_input_closefd,
1496     },
1497
1498 SQMP
1499 closefd
1500 -------
1501
1502 Close a file descriptor previously passed via SCM rights.
1503
1504 Arguments:
1505
1506 - "fdname": file descriptor name (json-string)
1507
1508 Example:
1509
1510 -> { "execute": "closefd", "arguments": { "fdname": "fd1" } }
1511 <- { "return": {} }
1512
1513 EQMP
1514
1515      {
1516         .name       = "add-fd",
1517         .args_type  = "fdset-id:i?,opaque:s?",
1518         .params     = "add-fd fdset-id opaque",
1519         .help       = "Add a file descriptor, that was passed via SCM rights, to an fd set",
1520         .mhandler.cmd_new = qmp_marshal_input_add_fd,
1521     },
1522
1523 SQMP
1524 add-fd
1525 -------
1526
1527 Add a file descriptor, that was passed via SCM rights, to an fd set.
1528
1529 Arguments:
1530
1531 - "fdset-id": The ID of the fd set to add the file descriptor to.
1532               (json-int, optional)
1533 - "opaque": A free-form string that can be used to describe the fd.
1534             (json-string, optional)
1535
1536 Return a json-object with the following information:
1537
1538 - "fdset-id": The ID of the fd set that the fd was added to. (json-int)
1539 - "fd": The file descriptor that was received via SCM rights and added to the
1540         fd set. (json-int)
1541
1542 Example:
1543
1544 -> { "execute": "add-fd", "arguments": { "fdset-id": 1 } }
1545 <- { "return": { "fdset-id": 1, "fd": 3 } }
1546
1547 Notes:
1548
1549 (1) The list of fd sets is shared by all monitor connections.
1550 (2) If "fdset-id" is not specified, a new fd set will be created.
1551
1552 EQMP
1553
1554      {
1555         .name       = "remove-fd",
1556         .args_type  = "fdset-id:i,fd:i?",
1557         .params     = "remove-fd fdset-id fd",
1558         .help       = "Remove a file descriptor from an fd set",
1559         .mhandler.cmd_new = qmp_marshal_input_remove_fd,
1560     },
1561
1562 SQMP
1563 remove-fd
1564 ---------
1565
1566 Remove a file descriptor from an fd set.
1567
1568 Arguments:
1569
1570 - "fdset-id": The ID of the fd set that the file descriptor belongs to.
1571               (json-int)
1572 - "fd": The file descriptor that is to be removed. (json-int, optional)
1573
1574 Example:
1575
1576 -> { "execute": "remove-fd", "arguments": { "fdset-id": 1, "fd": 3 } }
1577 <- { "return": {} }
1578
1579 Notes:
1580
1581 (1) The list of fd sets is shared by all monitor connections.
1582 (2) If "fd" is not specified, all file descriptors in "fdset-id" will be
1583     removed.
1584
1585 EQMP
1586
1587     {
1588         .name       = "query-fdsets",
1589         .args_type  = "",
1590         .help       = "Return information describing all fd sets",
1591         .mhandler.cmd_new = qmp_marshal_input_query_fdsets,
1592     },
1593
1594 SQMP
1595 query-fdsets
1596 -------------
1597
1598 Return information describing all fd sets.
1599
1600 Arguments: None
1601
1602 Example:
1603
1604 -> { "execute": "query-fdsets" }
1605 <- { "return": [
1606        {
1607          "fds": [
1608            {
1609              "fd": 30,
1610              "opaque": "rdonly:/path/to/file"
1611            },
1612            {
1613              "fd": 24,
1614              "opaque": "rdwr:/path/to/file"
1615            }
1616          ],
1617          "fdset-id": 1
1618        },
1619        {
1620          "fds": [
1621            {
1622              "fd": 28
1623            },
1624            {
1625              "fd": 29
1626            }
1627          ],
1628          "fdset-id": 0
1629        }
1630      ]
1631    }
1632
1633 Note: The list of fd sets is shared by all monitor connections.
1634
1635 EQMP
1636
1637     {
1638         .name       = "block_passwd",
1639         .args_type  = "device:s?,node-name:s?,password:s",
1640         .mhandler.cmd_new = qmp_marshal_input_block_passwd,
1641     },
1642
1643 SQMP
1644 block_passwd
1645 ------------
1646
1647 Set the password of encrypted block devices.
1648
1649 Arguments:
1650
1651 - "device": device name (json-string)
1652 - "node-name": name in the block driver state graph (json-string)
1653 - "password": password (json-string)
1654
1655 Example:
1656
1657 -> { "execute": "block_passwd", "arguments": { "device": "ide0-hd0",
1658                                                "password": "12345" } }
1659 <- { "return": {} }
1660
1661 EQMP
1662
1663     {
1664         .name       = "block_set_io_throttle",
1665         .args_type  = "device:B,bps:l,bps_rd:l,bps_wr:l,iops:l,iops_rd:l,iops_wr:l,bps_max:l?,bps_rd_max:l?,bps_wr_max:l?,iops_max:l?,iops_rd_max:l?,iops_wr_max:l?,iops_size:l?",
1666         .mhandler.cmd_new = qmp_marshal_input_block_set_io_throttle,
1667     },
1668
1669 SQMP
1670 block_set_io_throttle
1671 ------------
1672
1673 Change I/O throttle limits for a block drive.
1674
1675 Arguments:
1676
1677 - "device": device name (json-string)
1678 - "bps": total throughput limit in bytes per second (json-int)
1679 - "bps_rd": read throughput limit in bytes per second (json-int)
1680 - "bps_wr": write throughput limit in bytes per second (json-int)
1681 - "iops": total I/O operations per second (json-int)
1682 - "iops_rd": read I/O operations per second (json-int)
1683 - "iops_wr": write I/O operations per second (json-int)
1684 - "bps_max":  total max in bytes (json-int)
1685 - "bps_rd_max":  read max in bytes (json-int)
1686 - "bps_wr_max":  write max in bytes (json-int)
1687 - "iops_max":  total I/O operations max (json-int)
1688 - "iops_rd_max":  read I/O operations max (json-int)
1689 - "iops_wr_max":  write I/O operations max (json-int)
1690 - "iops_size":  I/O size in bytes when limiting (json-int)
1691
1692 Example:
1693
1694 -> { "execute": "block_set_io_throttle", "arguments": { "device": "virtio0",
1695                                                "bps": 1000000,
1696                                                "bps_rd": 0,
1697                                                "bps_wr": 0,
1698                                                "iops": 0,
1699                                                "iops_rd": 0,
1700                                                "iops_wr": 0,
1701                                                "bps_max": 8000000,
1702                                                "bps_rd_max": 0,
1703                                                "bps_wr_max": 0,
1704                                                "iops_max": 0,
1705                                                "iops_rd_max": 0,
1706                                                "iops_wr_max": 0,
1707                                                "iops_size": 0 } }
1708 <- { "return": {} }
1709
1710 EQMP
1711
1712     {
1713         .name       = "set_password",
1714         .args_type  = "protocol:s,password:s,connected:s?",
1715         .mhandler.cmd_new = qmp_marshal_input_set_password,
1716     },
1717
1718 SQMP
1719 set_password
1720 ------------
1721
1722 Set the password for vnc/spice protocols.
1723
1724 Arguments:
1725
1726 - "protocol": protocol name (json-string)
1727 - "password": password (json-string)
1728 - "connected": [ keep | disconnect | fail ] (josn-string, optional)
1729
1730 Example:
1731
1732 -> { "execute": "set_password", "arguments": { "protocol": "vnc",
1733                                                "password": "secret" } }
1734 <- { "return": {} }
1735
1736 EQMP
1737
1738     {
1739         .name       = "expire_password",
1740         .args_type  = "protocol:s,time:s",
1741         .mhandler.cmd_new = qmp_marshal_input_expire_password,
1742     },
1743
1744 SQMP
1745 expire_password
1746 ---------------
1747
1748 Set the password expire time for vnc/spice protocols.
1749
1750 Arguments:
1751
1752 - "protocol": protocol name (json-string)
1753 - "time": [ now | never | +secs | secs ] (json-string)
1754
1755 Example:
1756
1757 -> { "execute": "expire_password", "arguments": { "protocol": "vnc",
1758                                                   "time": "+60" } }
1759 <- { "return": {} }
1760
1761 EQMP
1762
1763     {
1764         .name       = "add_client",
1765         .args_type  = "protocol:s,fdname:s,skipauth:b?,tls:b?",
1766         .mhandler.cmd_new = qmp_marshal_input_add_client,
1767     },
1768
1769 SQMP
1770 add_client
1771 ----------
1772
1773 Add a graphics client
1774
1775 Arguments:
1776
1777 - "protocol": protocol name (json-string)
1778 - "fdname": file descriptor name (json-string)
1779 - "skipauth": whether to skip authentication (json-bool, optional)
1780 - "tls": whether to perform TLS (json-bool, optional)
1781
1782 Example:
1783
1784 -> { "execute": "add_client", "arguments": { "protocol": "vnc",
1785                                              "fdname": "myclient" } }
1786 <- { "return": {} }
1787
1788 EQMP
1789     {
1790         .name       = "qmp_capabilities",
1791         .args_type  = "",
1792         .params     = "",
1793         .help       = "enable QMP capabilities",
1794         .user_print = monitor_user_noop,
1795         .mhandler.cmd_new = do_qmp_capabilities,
1796     },
1797
1798 SQMP
1799 qmp_capabilities
1800 ----------------
1801
1802 Enable QMP capabilities.
1803
1804 Arguments: None.
1805
1806 Example:
1807
1808 -> { "execute": "qmp_capabilities" }
1809 <- { "return": {} }
1810
1811 Note: This command must be issued before issuing any other command.
1812
1813 EQMP
1814
1815     {
1816         .name       = "human-monitor-command",
1817         .args_type  = "command-line:s,cpu-index:i?",
1818         .mhandler.cmd_new = qmp_marshal_input_human_monitor_command,
1819     },
1820
1821 SQMP
1822 human-monitor-command
1823 ---------------------
1824
1825 Execute a Human Monitor command.
1826
1827 Arguments:
1828
1829 - command-line: the command name and its arguments, just like the
1830                 Human Monitor's shell (json-string)
1831 - cpu-index: select the CPU number to be used by commands which access CPU
1832              data, like 'info registers'. The Monitor selects CPU 0 if this
1833              argument is not provided (json-int, optional)
1834
1835 Example:
1836
1837 -> { "execute": "human-monitor-command", "arguments": { "command-line": "info kvm" } }
1838 <- { "return": "kvm support: enabled\r\n" }
1839
1840 Notes:
1841
1842 (1) The Human Monitor is NOT an stable interface, this means that command
1843     names, arguments and responses can change or be removed at ANY time.
1844     Applications that rely on long term stability guarantees should NOT
1845     use this command
1846
1847 (2) Limitations:
1848
1849     o This command is stateless, this means that commands that depend
1850       on state information (such as getfd) might not work
1851
1852     o Commands that prompt the user for data (eg. 'cont' when the block
1853       device is encrypted) don't currently work
1854
1855 3. Query Commands
1856 =================
1857
1858 HXCOMM Each query command below is inside a SQMP/EQMP section, do NOT change
1859 HXCOMM this! We will possibly move query commands definitions inside those
1860 HXCOMM sections, just like regular commands.
1861
1862 EQMP
1863
1864 SQMP
1865 query-version
1866 -------------
1867
1868 Show QEMU version.
1869
1870 Return a json-object with the following information:
1871
1872 - "qemu": A json-object containing three integer values:
1873     - "major": QEMU's major version (json-int)
1874     - "minor": QEMU's minor version (json-int)
1875     - "micro": QEMU's micro version (json-int)
1876 - "package": package's version (json-string)
1877
1878 Example:
1879
1880 -> { "execute": "query-version" }
1881 <- {
1882       "return":{
1883          "qemu":{
1884             "major":0,
1885             "minor":11,
1886             "micro":5
1887          },
1888          "package":""
1889       }
1890    }
1891
1892 EQMP
1893
1894     {
1895         .name       = "query-version",
1896         .args_type  = "",
1897         .mhandler.cmd_new = qmp_marshal_input_query_version,
1898     },
1899
1900 SQMP
1901 query-commands
1902 --------------
1903
1904 List QMP available commands.
1905
1906 Each command is represented by a json-object, the returned value is a json-array
1907 of all commands.
1908
1909 Each json-object contain:
1910
1911 - "name": command's name (json-string)
1912
1913 Example:
1914
1915 -> { "execute": "query-commands" }
1916 <- {
1917       "return":[
1918          {
1919             "name":"query-balloon"
1920          },
1921          {
1922             "name":"system_powerdown"
1923          }
1924       ]
1925    }
1926
1927 Note: This example has been shortened as the real response is too long.
1928
1929 EQMP
1930
1931     {
1932         .name       = "query-commands",
1933         .args_type  = "",
1934         .mhandler.cmd_new = qmp_marshal_input_query_commands,
1935     },
1936
1937 SQMP
1938 query-events
1939 --------------
1940
1941 List QMP available events.
1942
1943 Each event is represented by a json-object, the returned value is a json-array
1944 of all events.
1945
1946 Each json-object contains:
1947
1948 - "name": event's name (json-string)
1949
1950 Example:
1951
1952 -> { "execute": "query-events" }
1953 <- {
1954       "return":[
1955          {
1956             "name":"SHUTDOWN"
1957          },
1958          {
1959             "name":"RESET"
1960          }
1961       ]
1962    }
1963
1964 Note: This example has been shortened as the real response is too long.
1965
1966 EQMP
1967
1968     {
1969         .name       = "query-events",
1970         .args_type  = "",
1971         .mhandler.cmd_new = qmp_marshal_input_query_events,
1972     },
1973
1974 SQMP
1975 query-chardev
1976 -------------
1977
1978 Each device is represented by a json-object. The returned value is a json-array
1979 of all devices.
1980
1981 Each json-object contain the following:
1982
1983 - "label": device's label (json-string)
1984 - "filename": device's file (json-string)
1985 - "frontend-open": open/closed state of the frontend device attached to this
1986                    backend (json-bool)
1987
1988 Example:
1989
1990 -> { "execute": "query-chardev" }
1991 <- {
1992       "return": [
1993          {
1994             "label": "charchannel0",
1995             "filename": "unix:/var/lib/libvirt/qemu/seabios.rhel6.agent,server",
1996             "frontend-open": false
1997          },
1998          {
1999             "label": "charmonitor",
2000             "filename": "unix:/var/lib/libvirt/qemu/seabios.rhel6.monitor,server",
2001             "frontend-open": true
2002          },
2003          {
2004             "label": "charserial0",
2005             "filename": "pty:/dev/pts/2",
2006             "frontend-open": true
2007          }
2008       ]
2009    }
2010
2011 EQMP
2012
2013     {
2014         .name       = "query-chardev",
2015         .args_type  = "",
2016         .mhandler.cmd_new = qmp_marshal_input_query_chardev,
2017     },
2018
2019 SQMP
2020 query-chardev-backends
2021 -------------
2022
2023 List available character device backends.
2024
2025 Each backend is represented by a json-object, the returned value is a json-array
2026 of all backends.
2027
2028 Each json-object contains:
2029
2030 - "name": backend name (json-string)
2031
2032 Example:
2033
2034 -> { "execute": "query-chardev-backends" }
2035 <- {
2036       "return":[
2037          {
2038             "name":"udp"
2039          },
2040          {
2041             "name":"tcp"
2042          },
2043          {
2044             "name":"unix"
2045          },
2046          {
2047             "name":"spiceport"
2048          }
2049       ]
2050    }
2051
2052 EQMP
2053
2054     {
2055         .name       = "query-chardev-backends",
2056         .args_type  = "",
2057         .mhandler.cmd_new = qmp_marshal_input_query_chardev_backends,
2058     },
2059
2060 SQMP
2061 query-block
2062 -----------
2063
2064 Show the block devices.
2065
2066 Each block device information is stored in a json-object and the returned value
2067 is a json-array of all devices.
2068
2069 Each json-object contain the following:
2070
2071 - "device": device name (json-string)
2072 - "type": device type (json-string)
2073          - deprecated, retained for backward compatibility
2074          - Possible values: "unknown"
2075 - "removable": true if the device is removable, false otherwise (json-bool)
2076 - "locked": true if the device is locked, false otherwise (json-bool)
2077 - "tray_open": only present if removable, true if the device has a tray,
2078                and it is open (json-bool)
2079 - "inserted": only present if the device is inserted, it is a json-object
2080    containing the following:
2081          - "file": device file name (json-string)
2082          - "ro": true if read-only, false otherwise (json-bool)
2083          - "drv": driver format name (json-string)
2084              - Possible values: "blkdebug", "bochs", "cloop", "dmg",
2085                                 "file", "file", "ftp", "ftps", "host_cdrom",
2086                                 "host_device", "host_floppy", "http", "https",
2087                                 "nbd", "parallels", "qcow", "qcow2", "raw",
2088                                 "tftp", "vdi", "vmdk", "vpc", "vvfat"
2089          - "backing_file": backing file name (json-string, optional)
2090          - "backing_file_depth": number of files in the backing file chain (json-int)
2091          - "encrypted": true if encrypted, false otherwise (json-bool)
2092          - "bps": limit total bytes per second (json-int)
2093          - "bps_rd": limit read bytes per second (json-int)
2094          - "bps_wr": limit write bytes per second (json-int)
2095          - "iops": limit total I/O operations per second (json-int)
2096          - "iops_rd": limit read operations per second (json-int)
2097          - "iops_wr": limit write operations per second (json-int)
2098          - "bps_max":  total max in bytes (json-int)
2099          - "bps_rd_max":  read max in bytes (json-int)
2100          - "bps_wr_max":  write max in bytes (json-int)
2101          - "iops_max":  total I/O operations max (json-int)
2102          - "iops_rd_max":  read I/O operations max (json-int)
2103          - "iops_wr_max":  write I/O operations max (json-int)
2104          - "iops_size": I/O size when limiting by iops (json-int)
2105          - "detect_zeroes": detect and optimize zero writing (json-string)
2106              - Possible values: "off", "on", "unmap"
2107          - "image": the detail of the image, it is a json-object containing
2108             the following:
2109              - "filename": image file name (json-string)
2110              - "format": image format (json-string)
2111              - "virtual-size": image capacity in bytes (json-int)
2112              - "dirty-flag": true if image is not cleanly closed, not present
2113                              means clean (json-bool, optional)
2114              - "actual-size": actual size on disk in bytes of the image, not
2115                               present when image does not support thin
2116                               provision (json-int, optional)
2117              - "cluster-size": size of a cluster in bytes, not present if image
2118                                format does not support it (json-int, optional)
2119              - "encrypted": true if the image is encrypted, not present means
2120                             false or the image format does not support
2121                             encryption (json-bool, optional)
2122              - "backing_file": backing file name, not present means no backing
2123                                file is used or the image format does not
2124                                support backing file chain
2125                                (json-string, optional)
2126              - "full-backing-filename": full path of the backing file, not
2127                                         present if it equals backing_file or no
2128                                         backing file is used
2129                                         (json-string, optional)
2130              - "backing-filename-format": the format of the backing file, not
2131                                           present means unknown or no backing
2132                                           file (json-string, optional)
2133              - "snapshots": the internal snapshot info, it is an optional list
2134                 of json-object containing the following:
2135                  - "id": unique snapshot id (json-string)
2136                  - "name": snapshot name (json-string)
2137                  - "vm-state-size": size of the VM state in bytes (json-int)
2138                  - "date-sec": UTC date of the snapshot in seconds (json-int)
2139                  - "date-nsec": fractional part in nanoseconds to be used with
2140                                 date-sec (json-int)
2141                  - "vm-clock-sec": VM clock relative to boot in seconds
2142                                    (json-int)
2143                  - "vm-clock-nsec": fractional part in nanoseconds to be used
2144                                     with vm-clock-sec (json-int)
2145              - "backing-image": the detail of the backing image, it is an
2146                                 optional json-object only present when a
2147                                 backing image present for this image
2148
2149 - "io-status": I/O operation status, only present if the device supports it
2150                and the VM is configured to stop on errors. It's always reset
2151                to "ok" when the "cont" command is issued (json_string, optional)
2152              - Possible values: "ok", "failed", "nospace"
2153
2154 Example:
2155
2156 -> { "execute": "query-block" }
2157 <- {
2158       "return":[
2159          {
2160             "io-status": "ok",
2161             "device":"ide0-hd0",
2162             "locked":false,
2163             "removable":false,
2164             "inserted":{
2165                "ro":false,
2166                "drv":"qcow2",
2167                "encrypted":false,
2168                "file":"disks/test.qcow2",
2169                "backing_file_depth":1,
2170                "bps":1000000,
2171                "bps_rd":0,
2172                "bps_wr":0,
2173                "iops":1000000,
2174                "iops_rd":0,
2175                "iops_wr":0,
2176                "bps_max": 8000000,
2177                "bps_rd_max": 0,
2178                "bps_wr_max": 0,
2179                "iops_max": 0,
2180                "iops_rd_max": 0,
2181                "iops_wr_max": 0,
2182                "iops_size": 0,
2183                "detect_zeroes": "on",
2184                "image":{
2185                   "filename":"disks/test.qcow2",
2186                   "format":"qcow2",
2187                   "virtual-size":2048000,
2188                   "backing_file":"base.qcow2",
2189                   "full-backing-filename":"disks/base.qcow2",
2190                   "backing-filename-format:"qcow2",
2191                   "snapshots":[
2192                      {
2193                         "id": "1",
2194                         "name": "snapshot1",
2195                         "vm-state-size": 0,
2196                         "date-sec": 10000200,
2197                         "date-nsec": 12,
2198                         "vm-clock-sec": 206,
2199                         "vm-clock-nsec": 30
2200                      }
2201                   ],
2202                   "backing-image":{
2203                       "filename":"disks/base.qcow2",
2204                       "format":"qcow2",
2205                       "virtual-size":2048000
2206                   }
2207                }
2208             },
2209             "type":"unknown"
2210          },
2211          {
2212             "io-status": "ok",
2213             "device":"ide1-cd0",
2214             "locked":false,
2215             "removable":true,
2216             "type":"unknown"
2217          },
2218          {
2219             "device":"floppy0",
2220             "locked":false,
2221             "removable":true,
2222             "type":"unknown"
2223          },
2224          {
2225             "device":"sd0",
2226             "locked":false,
2227             "removable":true,
2228             "type":"unknown"
2229          }
2230       ]
2231    }
2232
2233 EQMP
2234
2235     {
2236         .name       = "query-block",
2237         .args_type  = "",
2238         .mhandler.cmd_new = qmp_marshal_input_query_block,
2239     },
2240
2241 SQMP
2242 query-blockstats
2243 ----------------
2244
2245 Show block device statistics.
2246
2247 Each device statistic information is stored in a json-object and the returned
2248 value is a json-array of all devices.
2249
2250 Each json-object contain the following:
2251
2252 - "device": device name (json-string)
2253 - "stats": A json-object with the statistics information, it contains:
2254     - "rd_bytes": bytes read (json-int)
2255     - "wr_bytes": bytes written (json-int)
2256     - "rd_operations": read operations (json-int)
2257     - "wr_operations": write operations (json-int)
2258     - "flush_operations": cache flush operations (json-int)
2259     - "wr_total_time_ns": total time spend on writes in nano-seconds (json-int)
2260     - "rd_total_time_ns": total time spend on reads in nano-seconds (json-int)
2261     - "flush_total_time_ns": total time spend on cache flushes in nano-seconds (json-int)
2262     - "wr_highest_offset": Highest offset of a sector written since the
2263                            BlockDriverState has been opened (json-int)
2264 - "parent": Contains recursively the statistics of the underlying
2265             protocol (e.g. the host file for a qcow2 image). If there is
2266             no underlying protocol, this field is omitted
2267             (json-object, optional)
2268
2269 Example:
2270
2271 -> { "execute": "query-blockstats" }
2272 <- {
2273       "return":[
2274          {
2275             "device":"ide0-hd0",
2276             "parent":{
2277                "stats":{
2278                   "wr_highest_offset":3686448128,
2279                   "wr_bytes":9786368,
2280                   "wr_operations":751,
2281                   "rd_bytes":122567168,
2282                   "rd_operations":36772
2283                   "wr_total_times_ns":313253456
2284                   "rd_total_times_ns":3465673657
2285                   "flush_total_times_ns":49653
2286                   "flush_operations":61,
2287                }
2288             },
2289             "stats":{
2290                "wr_highest_offset":2821110784,
2291                "wr_bytes":9786368,
2292                "wr_operations":692,
2293                "rd_bytes":122739200,
2294                "rd_operations":36604
2295                "flush_operations":51,
2296                "wr_total_times_ns":313253456
2297                "rd_total_times_ns":3465673657
2298                "flush_total_times_ns":49653
2299             }
2300          },
2301          {
2302             "device":"ide1-cd0",
2303             "stats":{
2304                "wr_highest_offset":0,
2305                "wr_bytes":0,
2306                "wr_operations":0,
2307                "rd_bytes":0,
2308                "rd_operations":0
2309                "flush_operations":0,
2310                "wr_total_times_ns":0
2311                "rd_total_times_ns":0
2312                "flush_total_times_ns":0
2313             }
2314          },
2315          {
2316             "device":"floppy0",
2317             "stats":{
2318                "wr_highest_offset":0,
2319                "wr_bytes":0,
2320                "wr_operations":0,
2321                "rd_bytes":0,
2322                "rd_operations":0
2323                "flush_operations":0,
2324                "wr_total_times_ns":0
2325                "rd_total_times_ns":0
2326                "flush_total_times_ns":0
2327             }
2328          },
2329          {
2330             "device":"sd0",
2331             "stats":{
2332                "wr_highest_offset":0,
2333                "wr_bytes":0,
2334                "wr_operations":0,
2335                "rd_bytes":0,
2336                "rd_operations":0
2337                "flush_operations":0,
2338                "wr_total_times_ns":0
2339                "rd_total_times_ns":0
2340                "flush_total_times_ns":0
2341             }
2342          }
2343       ]
2344    }
2345
2346 EQMP
2347
2348     {
2349         .name       = "query-blockstats",
2350         .args_type  = "",
2351         .mhandler.cmd_new = qmp_marshal_input_query_blockstats,
2352     },
2353
2354 SQMP
2355 query-cpus
2356 ----------
2357
2358 Show CPU information.
2359
2360 Return a json-array. Each CPU is represented by a json-object, which contains:
2361
2362 - "CPU": CPU index (json-int)
2363 - "current": true if this is the current CPU, false otherwise (json-bool)
2364 - "halted": true if the cpu is halted, false otherwise (json-bool)
2365 - Current program counter. The key's name depends on the architecture:
2366      "pc": i386/x86_64 (json-int)
2367      "nip": PPC (json-int)
2368      "pc" and "npc": sparc (json-int)
2369      "PC": mips (json-int)
2370 - "thread_id": ID of the underlying host thread (json-int)
2371
2372 Example:
2373
2374 -> { "execute": "query-cpus" }
2375 <- {
2376       "return":[
2377          {
2378             "CPU":0,
2379             "current":true,
2380             "halted":false,
2381             "pc":3227107138
2382             "thread_id":3134
2383          },
2384          {
2385             "CPU":1,
2386             "current":false,
2387             "halted":true,
2388             "pc":7108165
2389             "thread_id":3135
2390          }
2391       ]
2392    }
2393
2394 EQMP
2395
2396     {
2397         .name       = "query-cpus",
2398         .args_type  = "",
2399         .mhandler.cmd_new = qmp_marshal_input_query_cpus,
2400     },
2401
2402 SQMP
2403 query-iothreads
2404 ---------------
2405
2406 Returns a list of information about each iothread.
2407
2408 Note this list excludes the QEMU main loop thread, which is not declared
2409 using the -object iothread command-line option.  It is always the main thread
2410 of the process.
2411
2412 Return a json-array. Each iothread is represented by a json-object, which contains:
2413
2414 - "id": name of iothread (json-str)
2415 - "thread-id": ID of the underlying host thread (json-int)
2416
2417 Example:
2418
2419 -> { "execute": "query-iothreads" }
2420 <- {
2421       "return":[
2422          {
2423             "id":"iothread0",
2424             "thread-id":3134
2425          },
2426          {
2427             "id":"iothread1",
2428             "thread-id":3135
2429          }
2430       ]
2431    }
2432
2433 EQMP
2434
2435     {
2436         .name       = "query-iothreads",
2437         .args_type  = "",
2438         .mhandler.cmd_new = qmp_marshal_input_query_iothreads,
2439     },
2440
2441 SQMP
2442 query-pci
2443 ---------
2444
2445 PCI buses and devices information.
2446
2447 The returned value is a json-array of all buses. Each bus is represented by
2448 a json-object, which has a key with a json-array of all PCI devices attached
2449 to it. Each device is represented by a json-object.
2450
2451 The bus json-object contains the following:
2452
2453 - "bus": bus number (json-int)
2454 - "devices": a json-array of json-objects, each json-object represents a
2455              PCI device
2456
2457 The PCI device json-object contains the following:
2458
2459 - "bus": identical to the parent's bus number (json-int)
2460 - "slot": slot number (json-int)
2461 - "function": function number (json-int)
2462 - "class_info": a json-object containing:
2463      - "desc": device class description (json-string, optional)
2464      - "class": device class number (json-int)
2465 - "id": a json-object containing:
2466      - "device": device ID (json-int)
2467      - "vendor": vendor ID (json-int)
2468 - "irq": device's IRQ if assigned (json-int, optional)
2469 - "qdev_id": qdev id string (json-string)
2470 - "pci_bridge": It's a json-object, only present if this device is a
2471                 PCI bridge, contains:
2472      - "bus": bus number (json-int)
2473      - "secondary": secondary bus number (json-int)
2474      - "subordinate": subordinate bus number (json-int)
2475      - "io_range": I/O memory range information, a json-object with the
2476                    following members:
2477                  - "base": base address, in bytes (json-int)
2478                  - "limit": limit address, in bytes (json-int)
2479      - "memory_range": memory range information, a json-object with the
2480                        following members:
2481                  - "base": base address, in bytes (json-int)
2482                  - "limit": limit address, in bytes (json-int)
2483      - "prefetchable_range": Prefetchable memory range information, a
2484                              json-object with the following members:
2485                  - "base": base address, in bytes (json-int)
2486                  - "limit": limit address, in bytes (json-int)
2487      - "devices": a json-array of PCI devices if there's any attached, each
2488                   each element is represented by a json-object, which contains
2489                   the same members of the 'PCI device json-object' described
2490                   above (optional)
2491 - "regions": a json-array of json-objects, each json-object represents a
2492              memory region of this device
2493
2494 The memory range json-object contains the following:
2495
2496 - "base": base memory address (json-int)
2497 - "limit": limit value (json-int)
2498
2499 The region json-object can be an I/O region or a memory region, an I/O region
2500 json-object contains the following:
2501
2502 - "type": "io" (json-string, fixed)
2503 - "bar": BAR number (json-int)
2504 - "address": memory address (json-int)
2505 - "size": memory size (json-int)
2506
2507 A memory region json-object contains the following:
2508
2509 - "type": "memory" (json-string, fixed)
2510 - "bar": BAR number (json-int)
2511 - "address": memory address (json-int)
2512 - "size": memory size (json-int)
2513 - "mem_type_64": true or false (json-bool)
2514 - "prefetch": true or false (json-bool)
2515
2516 Example:
2517
2518 -> { "execute": "query-pci" }
2519 <- {
2520       "return":[
2521          {
2522             "bus":0,
2523             "devices":[
2524                {
2525                   "bus":0,
2526                   "qdev_id":"",
2527                   "slot":0,
2528                   "class_info":{
2529                      "class":1536,
2530                      "desc":"Host bridge"
2531                   },
2532                   "id":{
2533                      "device":32902,
2534                      "vendor":4663
2535                   },
2536                   "function":0,
2537                   "regions":[
2538
2539                   ]
2540                },
2541                {
2542                   "bus":0,
2543                   "qdev_id":"",
2544                   "slot":1,
2545                   "class_info":{
2546                      "class":1537,
2547                      "desc":"ISA bridge"
2548                   },
2549                   "id":{
2550                      "device":32902,
2551                      "vendor":28672
2552                   },
2553                   "function":0,
2554                   "regions":[
2555
2556                   ]
2557                },
2558                {
2559                   "bus":0,
2560                   "qdev_id":"",
2561                   "slot":1,
2562                   "class_info":{
2563                      "class":257,
2564                      "desc":"IDE controller"
2565                   },
2566                   "id":{
2567                      "device":32902,
2568                      "vendor":28688
2569                   },
2570                   "function":1,
2571                   "regions":[
2572                      {
2573                         "bar":4,
2574                         "size":16,
2575                         "address":49152,
2576                         "type":"io"
2577                      }
2578                   ]
2579                },
2580                {
2581                   "bus":0,
2582                   "qdev_id":"",
2583                   "slot":2,
2584                   "class_info":{
2585                      "class":768,
2586                      "desc":"VGA controller"
2587                   },
2588                   "id":{
2589                      "device":4115,
2590                      "vendor":184
2591                   },
2592                   "function":0,
2593                   "regions":[
2594                      {
2595                         "prefetch":true,
2596                         "mem_type_64":false,
2597                         "bar":0,
2598                         "size":33554432,
2599                         "address":4026531840,
2600                         "type":"memory"
2601                      },
2602                      {
2603                         "prefetch":false,
2604                         "mem_type_64":false,
2605                         "bar":1,
2606                         "size":4096,
2607                         "address":4060086272,
2608                         "type":"memory"
2609                      },
2610                      {
2611                         "prefetch":false,
2612                         "mem_type_64":false,
2613                         "bar":6,
2614                         "size":65536,
2615                         "address":-1,
2616                         "type":"memory"
2617                      }
2618                   ]
2619                },
2620                {
2621                   "bus":0,
2622                   "qdev_id":"",
2623                   "irq":11,
2624                   "slot":4,
2625                   "class_info":{
2626                      "class":1280,
2627                      "desc":"RAM controller"
2628                   },
2629                   "id":{
2630                      "device":6900,
2631                      "vendor":4098
2632                   },
2633                   "function":0,
2634                   "regions":[
2635                      {
2636                         "bar":0,
2637                         "size":32,
2638                         "address":49280,
2639                         "type":"io"
2640                      }
2641                   ]
2642                }
2643             ]
2644          }
2645       ]
2646    }
2647
2648 Note: This example has been shortened as the real response is too long.
2649
2650 EQMP
2651
2652     {
2653         .name       = "query-pci",
2654         .args_type  = "",
2655         .mhandler.cmd_new = qmp_marshal_input_query_pci,
2656     },
2657
2658 SQMP
2659 query-kvm
2660 ---------
2661
2662 Show KVM information.
2663
2664 Return a json-object with the following information:
2665
2666 - "enabled": true if KVM support is enabled, false otherwise (json-bool)
2667 - "present": true if QEMU has KVM support, false otherwise (json-bool)
2668
2669 Example:
2670
2671 -> { "execute": "query-kvm" }
2672 <- { "return": { "enabled": true, "present": true } }
2673
2674 EQMP
2675
2676     {
2677         .name       = "query-kvm",
2678         .args_type  = "",
2679         .mhandler.cmd_new = qmp_marshal_input_query_kvm,
2680     },
2681
2682 SQMP
2683 query-status
2684 ------------
2685
2686 Return a json-object with the following information:
2687
2688 - "running": true if the VM is running, or false if it is paused (json-bool)
2689 - "singlestep": true if the VM is in single step mode,
2690                 false otherwise (json-bool)
2691 - "status": one of the following values (json-string)
2692     "debug" - QEMU is running on a debugger
2693     "inmigrate" - guest is paused waiting for an incoming migration
2694     "internal-error" - An internal error that prevents further guest
2695     execution has occurred
2696     "io-error" - the last IOP has failed and the device is configured
2697     to pause on I/O errors
2698     "paused" - guest has been paused via the 'stop' command
2699     "postmigrate" - guest is paused following a successful 'migrate'
2700     "prelaunch" - QEMU was started with -S and guest has not started
2701     "finish-migrate" - guest is paused to finish the migration process
2702     "restore-vm" - guest is paused to restore VM state
2703     "running" - guest is actively running
2704     "save-vm" - guest is paused to save the VM state
2705     "shutdown" - guest is shut down (and -no-shutdown is in use)
2706     "watchdog" - the watchdog action is configured to pause and
2707      has been triggered
2708
2709 Example:
2710
2711 -> { "execute": "query-status" }
2712 <- { "return": { "running": true, "singlestep": false, "status": "running" } }
2713
2714 EQMP
2715
2716     {
2717         .name       = "query-status",
2718         .args_type  = "",
2719         .mhandler.cmd_new = qmp_marshal_input_query_status,
2720     },
2721
2722 SQMP
2723 query-mice
2724 ----------
2725
2726 Show VM mice information.
2727
2728 Each mouse is represented by a json-object, the returned value is a json-array
2729 of all mice.
2730
2731 The mouse json-object contains the following:
2732
2733 - "name": mouse's name (json-string)
2734 - "index": mouse's index (json-int)
2735 - "current": true if this mouse is receiving events, false otherwise (json-bool)
2736 - "absolute": true if the mouse generates absolute input events (json-bool)
2737
2738 Example:
2739
2740 -> { "execute": "query-mice" }
2741 <- {
2742       "return":[
2743          {
2744             "name":"QEMU Microsoft Mouse",
2745             "index":0,
2746             "current":false,
2747             "absolute":false
2748          },
2749          {
2750             "name":"QEMU PS/2 Mouse",
2751             "index":1,
2752             "current":true,
2753             "absolute":true
2754          }
2755       ]
2756    }
2757
2758 EQMP
2759
2760     {
2761         .name       = "query-mice",
2762         .args_type  = "",
2763         .mhandler.cmd_new = qmp_marshal_input_query_mice,
2764     },
2765
2766 SQMP
2767 query-vnc
2768 ---------
2769
2770 Show VNC server information.
2771
2772 Return a json-object with server information. Connected clients are returned
2773 as a json-array of json-objects.
2774
2775 The main json-object contains the following:
2776
2777 - "enabled": true or false (json-bool)
2778 - "host": server's IP address (json-string)
2779 - "family": address family (json-string)
2780          - Possible values: "ipv4", "ipv6", "unix", "unknown"
2781 - "service": server's port number (json-string)
2782 - "auth": authentication method (json-string)
2783          - Possible values: "invalid", "none", "ra2", "ra2ne", "sasl", "tight",
2784                             "tls", "ultra", "unknown", "vencrypt", "vencrypt",
2785                             "vencrypt+plain", "vencrypt+tls+none",
2786                             "vencrypt+tls+plain", "vencrypt+tls+sasl",
2787                             "vencrypt+tls+vnc", "vencrypt+x509+none",
2788                             "vencrypt+x509+plain", "vencrypt+x509+sasl",
2789                             "vencrypt+x509+vnc", "vnc"
2790 - "clients": a json-array of all connected clients
2791
2792 Clients are described by a json-object, each one contain the following:
2793
2794 - "host": client's IP address (json-string)
2795 - "family": address family (json-string)
2796          - Possible values: "ipv4", "ipv6", "unix", "unknown"
2797 - "service": client's port number (json-string)
2798 - "x509_dname": TLS dname (json-string, optional)
2799 - "sasl_username": SASL username (json-string, optional)
2800
2801 Example:
2802
2803 -> { "execute": "query-vnc" }
2804 <- {
2805       "return":{
2806          "enabled":true,
2807          "host":"0.0.0.0",
2808          "service":"50402",
2809          "auth":"vnc",
2810          "family":"ipv4",
2811          "clients":[
2812             {
2813                "host":"127.0.0.1",
2814                "service":"50401",
2815                "family":"ipv4"
2816             }
2817          ]
2818       }
2819    }
2820
2821 EQMP
2822
2823     {
2824         .name       = "query-vnc",
2825         .args_type  = "",
2826         .mhandler.cmd_new = qmp_marshal_input_query_vnc,
2827     },
2828
2829 SQMP
2830 query-spice
2831 -----------
2832
2833 Show SPICE server information.
2834
2835 Return a json-object with server information. Connected clients are returned
2836 as a json-array of json-objects.
2837
2838 The main json-object contains the following:
2839
2840 - "enabled": true or false (json-bool)
2841 - "host": server's IP address (json-string)
2842 - "port": server's port number (json-int, optional)
2843 - "tls-port": server's port number (json-int, optional)
2844 - "auth": authentication method (json-string)
2845          - Possible values: "none", "spice"
2846 - "channels": a json-array of all active channels clients
2847
2848 Channels are described by a json-object, each one contain the following:
2849
2850 - "host": client's IP address (json-string)
2851 - "family": address family (json-string)
2852          - Possible values: "ipv4", "ipv6", "unix", "unknown"
2853 - "port": client's port number (json-string)
2854 - "connection-id": spice connection id.  All channels with the same id
2855                    belong to the same spice session (json-int)
2856 - "channel-type": channel type.  "1" is the main control channel, filter for
2857                   this one if you want track spice sessions only (json-int)
2858 - "channel-id": channel id.  Usually "0", might be different needed when
2859                 multiple channels of the same type exist, such as multiple
2860                 display channels in a multihead setup (json-int)
2861 - "tls": whevener the channel is encrypted (json-bool)
2862
2863 Example:
2864
2865 -> { "execute": "query-spice" }
2866 <- {
2867       "return": {
2868          "enabled": true,
2869          "auth": "spice",
2870          "port": 5920,
2871          "tls-port": 5921,
2872          "host": "0.0.0.0",
2873          "channels": [
2874             {
2875                "port": "54924",
2876                "family": "ipv4",
2877                "channel-type": 1,
2878                "connection-id": 1804289383,
2879                "host": "127.0.0.1",
2880                "channel-id": 0,
2881                "tls": true
2882             },
2883             {
2884                "port": "36710",
2885                "family": "ipv4",
2886                "channel-type": 4,
2887                "connection-id": 1804289383,
2888                "host": "127.0.0.1",
2889                "channel-id": 0,
2890                "tls": false
2891             },
2892             [ ... more channels follow ... ]
2893          ]
2894       }
2895    }
2896
2897 EQMP
2898
2899 #if defined(CONFIG_SPICE)
2900     {
2901         .name       = "query-spice",
2902         .args_type  = "",
2903         .mhandler.cmd_new = qmp_marshal_input_query_spice,
2904     },
2905 #endif
2906
2907 SQMP
2908 query-name
2909 ----------
2910
2911 Show VM name.
2912
2913 Return a json-object with the following information:
2914
2915 - "name": VM's name (json-string, optional)
2916
2917 Example:
2918
2919 -> { "execute": "query-name" }
2920 <- { "return": { "name": "qemu-name" } }
2921
2922 EQMP
2923
2924     {
2925         .name       = "query-name",
2926         .args_type  = "",
2927         .mhandler.cmd_new = qmp_marshal_input_query_name,
2928     },
2929
2930 SQMP
2931 query-uuid
2932 ----------
2933
2934 Show VM UUID.
2935
2936 Return a json-object with the following information:
2937
2938 - "UUID": Universally Unique Identifier (json-string)
2939
2940 Example:
2941
2942 -> { "execute": "query-uuid" }
2943 <- { "return": { "UUID": "550e8400-e29b-41d4-a716-446655440000" } }
2944
2945 EQMP
2946
2947     {
2948         .name       = "query-uuid",
2949         .args_type  = "",
2950         .mhandler.cmd_new = qmp_marshal_input_query_uuid,
2951     },
2952
2953 SQMP
2954 query-command-line-options
2955 --------------------------
2956
2957 Show command line option schema.
2958
2959 Return a json-array of command line option schema for all options (or for
2960 the given option), returning an error if the given option doesn't exist.
2961
2962 Each array entry contains the following:
2963
2964 - "option": option name (json-string)
2965 - "parameters": a json-array describes all parameters of the option:
2966     - "name": parameter name (json-string)
2967     - "type": parameter type (one of 'string', 'boolean', 'number',
2968               or 'size')
2969     - "help": human readable description of the parameter
2970               (json-string, optional)
2971     - "default": default value string for the parameter
2972                  (json-string, optional)
2973
2974 Example:
2975
2976 -> { "execute": "query-command-line-options", "arguments": { "option": "option-rom" } }
2977 <- { "return": [
2978         {
2979             "parameters": [
2980                 {
2981                     "name": "romfile",
2982                     "type": "string"
2983                 },
2984                 {
2985                     "name": "bootindex",
2986                     "type": "number"
2987                 }
2988             ],
2989             "option": "option-rom"
2990         }
2991      ]
2992    }
2993
2994 EQMP
2995
2996     {
2997         .name       = "query-command-line-options",
2998         .args_type  = "option:s?",
2999         .mhandler.cmd_new = qmp_marshal_input_query_command_line_options,
3000     },
3001
3002 SQMP
3003 query-migrate
3004 -------------
3005
3006 Migration status.
3007
3008 Return a json-object. If migration is active there will be another json-object
3009 with RAM migration status and if block migration is active another one with
3010 block migration status.
3011
3012 The main json-object contains the following:
3013
3014 - "status": migration status (json-string)
3015      - Possible values: "setup", "active", "completed", "failed", "cancelled"
3016 - "total-time": total amount of ms since migration started.  If
3017                 migration has ended, it returns the total migration
3018                 time (json-int)
3019 - "setup-time" amount of setup time in milliseconds _before_ the
3020                iterations begin but _after_ the QMP command is issued.
3021                This is designed to provide an accounting of any activities
3022                (such as RDMA pinning) which may be expensive, but do not
3023                actually occur during the iterative migration rounds
3024                themselves. (json-int)
3025 - "downtime": only present when migration has finished correctly
3026               total amount in ms for downtime that happened (json-int)
3027 - "expected-downtime": only present while migration is active
3028                 total amount in ms for downtime that was calculated on
3029                 the last bitmap round (json-int)
3030 - "ram": only present if "status" is "active", it is a json-object with the
3031   following RAM information:
3032          - "transferred": amount transferred in bytes (json-int)
3033          - "remaining": amount remaining to transfer in bytes (json-int)
3034          - "total": total amount of memory in bytes (json-int)
3035          - "duplicate": number of pages filled entirely with the same
3036             byte (json-int)
3037             These are sent over the wire much more efficiently.
3038          - "skipped": number of skipped zero pages (json-int)
3039          - "normal" : number of whole pages transferred.  I.e. they
3040             were not sent as duplicate or xbzrle pages (json-int)
3041          - "normal-bytes" : number of bytes transferred in whole
3042             pages. This is just normal pages times size of one page,
3043             but this way upper levels don't need to care about page
3044             size (json-int)
3045          - "dirty-sync-count": times that dirty ram was synchronized (json-int)
3046 - "disk": only present if "status" is "active" and it is a block migration,
3047   it is a json-object with the following disk information:
3048          - "transferred": amount transferred in bytes (json-int)
3049          - "remaining": amount remaining to transfer in bytes json-int)
3050          - "total": total disk size in bytes (json-int)
3051 - "xbzrle-cache": only present if XBZRLE is active.
3052   It is a json-object with the following XBZRLE information:
3053          - "cache-size": XBZRLE cache size in bytes
3054          - "bytes": number of bytes transferred for XBZRLE compressed pages
3055          - "pages": number of XBZRLE compressed pages
3056          - "cache-miss": number of XBRZRLE page cache misses
3057          - "cache-miss-rate": rate of XBRZRLE page cache misses
3058          - "overflow": number of times XBZRLE overflows.  This means
3059            that the XBZRLE encoding was bigger than just sent the
3060            whole page, and then we sent the whole page instead (as as
3061            normal page).
3062
3063 Examples:
3064
3065 1. Before the first migration
3066
3067 -> { "execute": "query-migrate" }
3068 <- { "return": {} }
3069
3070 2. Migration is done and has succeeded
3071
3072 -> { "execute": "query-migrate" }
3073 <- { "return": {
3074         "status": "completed",
3075         "ram":{
3076           "transferred":123,
3077           "remaining":123,
3078           "total":246,
3079           "total-time":12345,
3080           "setup-time":12345,
3081           "downtime":12345,
3082           "duplicate":123,
3083           "normal":123,
3084           "normal-bytes":123456,
3085           "dirty-sync-count":15
3086         }
3087      }
3088    }
3089
3090 3. Migration is done and has failed
3091
3092 -> { "execute": "query-migrate" }
3093 <- { "return": { "status": "failed" } }
3094
3095 4. Migration is being performed and is not a block migration:
3096
3097 -> { "execute": "query-migrate" }
3098 <- {
3099       "return":{
3100          "status":"active",
3101          "ram":{
3102             "transferred":123,
3103             "remaining":123,
3104             "total":246,
3105             "total-time":12345,
3106             "setup-time":12345,
3107             "expected-downtime":12345,
3108             "duplicate":123,
3109             "normal":123,
3110             "normal-bytes":123456,
3111             "dirty-sync-count":15
3112          }
3113       }
3114    }
3115
3116 5. Migration is being performed and is a block migration:
3117
3118 -> { "execute": "query-migrate" }
3119 <- {
3120       "return":{
3121          "status":"active",
3122          "ram":{
3123             "total":1057024,
3124             "remaining":1053304,
3125             "transferred":3720,
3126             "total-time":12345,
3127             "setup-time":12345,
3128             "expected-downtime":12345,
3129             "duplicate":123,
3130             "normal":123,
3131             "normal-bytes":123456,
3132             "dirty-sync-count":15
3133          },
3134          "disk":{
3135             "total":20971520,
3136             "remaining":20880384,
3137             "transferred":91136
3138          }
3139       }
3140    }
3141
3142 6. Migration is being performed and XBZRLE is active:
3143
3144 -> { "execute": "query-migrate" }
3145 <- {
3146       "return":{
3147          "status":"active",
3148          "capabilities" : [ { "capability": "xbzrle", "state" : true } ],
3149          "ram":{
3150             "total":1057024,
3151             "remaining":1053304,
3152             "transferred":3720,
3153             "total-time":12345,
3154             "setup-time":12345,
3155             "expected-downtime":12345,
3156             "duplicate":10,
3157             "normal":3333,
3158             "normal-bytes":3412992,
3159             "dirty-sync-count":15
3160          },
3161          "xbzrle-cache":{
3162             "cache-size":67108864,
3163             "bytes":20971520,
3164             "pages":2444343,
3165             "cache-miss":2244,
3166             "cache-miss-rate":0.123,
3167             "overflow":34434
3168          }
3169       }
3170    }
3171
3172 EQMP
3173
3174     {
3175         .name       = "query-migrate",
3176         .args_type  = "",
3177         .mhandler.cmd_new = qmp_marshal_input_query_migrate,
3178     },
3179
3180 SQMP
3181 migrate-set-capabilities
3182 ------------------------
3183
3184 Enable/Disable migration capabilities
3185
3186 - "xbzrle": XBZRLE support
3187
3188 Arguments:
3189
3190 Example:
3191
3192 -> { "execute": "migrate-set-capabilities" , "arguments":
3193      { "capabilities": [ { "capability": "xbzrle", "state": true } ] } }
3194
3195 EQMP
3196
3197     {
3198         .name       = "migrate-set-capabilities",
3199         .args_type  = "capabilities:O",
3200         .params     = "capability:s,state:b",
3201         .mhandler.cmd_new = qmp_marshal_input_migrate_set_capabilities,
3202     },
3203 SQMP
3204 query-migrate-capabilities
3205 --------------------------
3206
3207 Query current migration capabilities
3208
3209 - "capabilities": migration capabilities state
3210          - "xbzrle" : XBZRLE state (json-bool)
3211
3212 Arguments:
3213
3214 Example:
3215
3216 -> { "execute": "query-migrate-capabilities" }
3217 <- { "return": [ { "state": false, "capability": "xbzrle" } ] }
3218
3219 EQMP
3220
3221     {
3222         .name       = "query-migrate-capabilities",
3223         .args_type  = "",
3224         .mhandler.cmd_new = qmp_marshal_input_query_migrate_capabilities,
3225     },
3226
3227 SQMP
3228 query-balloon
3229 -------------
3230
3231 Show balloon information.
3232
3233 Make an asynchronous request for balloon info. When the request completes a
3234 json-object will be returned containing the following data:
3235
3236 - "actual": current balloon value in bytes (json-int)
3237
3238 Example:
3239
3240 -> { "execute": "query-balloon" }
3241 <- {
3242       "return":{
3243          "actual":1073741824,
3244       }
3245    }
3246
3247 EQMP
3248
3249     {
3250         .name       = "query-balloon",
3251         .args_type  = "",
3252         .mhandler.cmd_new = qmp_marshal_input_query_balloon,
3253     },
3254
3255     {
3256         .name       = "query-block-jobs",
3257         .args_type  = "",
3258         .mhandler.cmd_new = qmp_marshal_input_query_block_jobs,
3259     },
3260
3261     {
3262         .name       = "qom-list",
3263         .args_type  = "path:s",
3264         .mhandler.cmd_new = qmp_marshal_input_qom_list,
3265     },
3266
3267     {
3268         .name       = "qom-set",
3269         .args_type  = "path:s,property:s,value:q",
3270         .mhandler.cmd_new = qmp_qom_set,
3271     },
3272
3273     {
3274         .name       = "qom-get",
3275         .args_type  = "path:s,property:s",
3276         .mhandler.cmd_new = qmp_qom_get,
3277     },
3278
3279     {
3280         .name       = "nbd-server-start",
3281         .args_type  = "addr:q",
3282         .mhandler.cmd_new = qmp_marshal_input_nbd_server_start,
3283     },
3284     {
3285         .name       = "nbd-server-add",
3286         .args_type  = "device:B,writable:b?",
3287         .mhandler.cmd_new = qmp_marshal_input_nbd_server_add,
3288     },
3289     {
3290         .name       = "nbd-server-stop",
3291         .args_type  = "",
3292         .mhandler.cmd_new = qmp_marshal_input_nbd_server_stop,
3293     },
3294
3295     {
3296         .name       = "change-vnc-password",
3297         .args_type  = "password:s",
3298         .mhandler.cmd_new = qmp_marshal_input_change_vnc_password,
3299     },
3300     {
3301         .name       = "qom-list-types",
3302         .args_type  = "implements:s?,abstract:b?",
3303         .mhandler.cmd_new = qmp_marshal_input_qom_list_types,
3304     },
3305
3306     {
3307         .name       = "device-list-properties",
3308         .args_type  = "typename:s",
3309         .mhandler.cmd_new = qmp_marshal_input_device_list_properties,
3310     },
3311
3312     {
3313         .name       = "query-machines",
3314         .args_type  = "",
3315         .mhandler.cmd_new = qmp_marshal_input_query_machines,
3316     },
3317
3318     {
3319         .name       = "query-cpu-definitions",
3320         .args_type  = "",
3321         .mhandler.cmd_new = qmp_marshal_input_query_cpu_definitions,
3322     },
3323
3324     {
3325         .name       = "query-target",
3326         .args_type  = "",
3327         .mhandler.cmd_new = qmp_marshal_input_query_target,
3328     },
3329
3330     {
3331         .name       = "query-tpm",
3332         .args_type  = "",
3333         .mhandler.cmd_new = qmp_marshal_input_query_tpm,
3334     },
3335
3336 SQMP
3337 query-tpm
3338 ---------
3339
3340 Return information about the TPM device.
3341
3342 Arguments: None
3343
3344 Example:
3345
3346 -> { "execute": "query-tpm" }
3347 <- { "return":
3348      [
3349        { "model": "tpm-tis",
3350          "options":
3351            { "type": "passthrough",
3352              "data":
3353                { "cancel-path": "/sys/class/misc/tpm0/device/cancel",
3354                  "path": "/dev/tpm0"
3355                }
3356            },
3357          "id": "tpm0"
3358        }
3359      ]
3360    }
3361
3362 EQMP
3363
3364     {
3365         .name       = "query-tpm-models",
3366         .args_type  = "",
3367         .mhandler.cmd_new = qmp_marshal_input_query_tpm_models,
3368     },
3369
3370 SQMP
3371 query-tpm-models
3372 ----------------
3373
3374 Return a list of supported TPM models.
3375
3376 Arguments: None
3377
3378 Example:
3379
3380 -> { "execute": "query-tpm-models" }
3381 <- { "return": [ "tpm-tis" ] }
3382
3383 EQMP
3384
3385     {
3386         .name       = "query-tpm-types",
3387         .args_type  = "",
3388         .mhandler.cmd_new = qmp_marshal_input_query_tpm_types,
3389     },
3390
3391 SQMP
3392 query-tpm-types
3393 ---------------
3394
3395 Return a list of supported TPM types.
3396
3397 Arguments: None
3398
3399 Example:
3400
3401 -> { "execute": "query-tpm-types" }
3402 <- { "return": [ "passthrough" ] }
3403
3404 EQMP
3405
3406     {
3407         .name       = "chardev-add",
3408         .args_type  = "id:s,backend:q",
3409         .mhandler.cmd_new = qmp_marshal_input_chardev_add,
3410     },
3411
3412 SQMP
3413 chardev-add
3414 ----------------
3415
3416 Add a chardev.
3417
3418 Arguments:
3419
3420 - "id": the chardev's ID, must be unique (json-string)
3421 - "backend": chardev backend type + parameters
3422
3423 Examples:
3424
3425 -> { "execute" : "chardev-add",
3426      "arguments" : { "id" : "foo",
3427                      "backend" : { "type" : "null", "data" : {} } } }
3428 <- { "return": {} }
3429
3430 -> { "execute" : "chardev-add",
3431      "arguments" : { "id" : "bar",
3432                      "backend" : { "type" : "file",
3433                                    "data" : { "out" : "/tmp/bar.log" } } } }
3434 <- { "return": {} }
3435
3436 -> { "execute" : "chardev-add",
3437      "arguments" : { "id" : "baz",
3438                      "backend" : { "type" : "pty", "data" : {} } } }
3439 <- { "return": { "pty" : "/dev/pty/42" } }
3440
3441 EQMP
3442
3443     {
3444         .name       = "chardev-remove",
3445         .args_type  = "id:s",
3446         .mhandler.cmd_new = qmp_marshal_input_chardev_remove,
3447     },
3448
3449
3450 SQMP
3451 chardev-remove
3452 --------------
3453
3454 Remove a chardev.
3455
3456 Arguments:
3457
3458 - "id": the chardev's ID, must exist and not be in use (json-string)
3459
3460 Example:
3461
3462 -> { "execute": "chardev-remove", "arguments": { "id" : "foo" } }
3463 <- { "return": {} }
3464
3465 EQMP
3466     {
3467         .name       = "query-rx-filter",
3468         .args_type  = "name:s?",
3469         .mhandler.cmd_new = qmp_marshal_input_query_rx_filter,
3470     },
3471
3472 SQMP
3473 query-rx-filter
3474 ---------------
3475
3476 Show rx-filter information.
3477
3478 Returns a json-array of rx-filter information for all NICs (or for the
3479 given NIC), returning an error if the given NIC doesn't exist, or
3480 given NIC doesn't support rx-filter querying, or given net client
3481 isn't a NIC.
3482
3483 The query will clear the event notification flag of each NIC, then qemu
3484 will start to emit event to QMP monitor.
3485
3486 Each array entry contains the following:
3487
3488 - "name": net client name (json-string)
3489 - "promiscuous": promiscuous mode is enabled (json-bool)
3490 - "multicast": multicast receive state (one of 'normal', 'none', 'all')
3491 - "unicast": unicast receive state  (one of 'normal', 'none', 'all')
3492 - "vlan": vlan receive state (one of 'normal', 'none', 'all') (Since 2.0)
3493 - "broadcast-allowed": allow to receive broadcast (json-bool)
3494 - "multicast-overflow": multicast table is overflowed (json-bool)
3495 - "unicast-overflow": unicast table is overflowed (json-bool)
3496 - "main-mac": main macaddr string (json-string)
3497 - "vlan-table": a json-array of active vlan id
3498 - "unicast-table": a json-array of unicast macaddr string
3499 - "multicast-table": a json-array of multicast macaddr string
3500
3501 Example:
3502
3503 -> { "execute": "query-rx-filter", "arguments": { "name": "vnet0" } }
3504 <- { "return": [
3505         {
3506             "promiscuous": true,
3507             "name": "vnet0",
3508             "main-mac": "52:54:00:12:34:56",
3509             "unicast": "normal",
3510             "vlan": "normal",
3511             "vlan-table": [
3512                 4,
3513                 0
3514             ],
3515             "unicast-table": [
3516             ],
3517             "multicast": "normal",
3518             "multicast-overflow": false,
3519             "unicast-overflow": false,
3520             "multicast-table": [
3521                 "01:00:5e:00:00:01",
3522                 "33:33:00:00:00:01",
3523                 "33:33:ff:12:34:56"
3524             ],
3525             "broadcast-allowed": false
3526         }
3527       ]
3528    }
3529
3530 EQMP
3531
3532     {
3533         .name       = "blockdev-add",
3534         .args_type  = "options:q",
3535         .mhandler.cmd_new = qmp_marshal_input_blockdev_add,
3536     },
3537
3538 SQMP
3539 blockdev-add
3540 ------------
3541
3542 Add a block device.
3543
3544 Arguments:
3545
3546 - "options": block driver options
3547
3548 Example (1):
3549
3550 -> { "execute": "blockdev-add",
3551     "arguments": { "options" : { "driver": "qcow2",
3552                                  "file": { "driver": "file",
3553                                            "filename": "test.qcow2" } } } }
3554 <- { "return": {} }
3555
3556 Example (2):
3557
3558 -> { "execute": "blockdev-add",
3559      "arguments": {
3560          "options": {
3561            "driver": "qcow2",
3562            "id": "my_disk",
3563            "discard": "unmap",
3564            "cache": {
3565                "direct": true,
3566                "writeback": true
3567            },
3568            "file": {
3569                "driver": "file",
3570                "filename": "/tmp/test.qcow2"
3571            },
3572            "backing": {
3573                "driver": "raw",
3574                "file": {
3575                    "driver": "file",
3576                    "filename": "/dev/fdset/4"
3577                }
3578            }
3579          }
3580        }
3581      }
3582
3583 <- { "return": {} }
3584
3585 EQMP
3586
3587     {
3588         .name       = "query-named-block-nodes",
3589         .args_type  = "",
3590         .mhandler.cmd_new = qmp_marshal_input_query_named_block_nodes,
3591     },
3592
3593 SQMP
3594 @query-named-block-nodes
3595 ------------------------
3596
3597 Return a list of BlockDeviceInfo for all the named block driver nodes
3598
3599 Example:
3600
3601 -> { "execute": "query-named-block-nodes" }
3602 <- { "return": [ { "ro":false,
3603                    "drv":"qcow2",
3604                    "encrypted":false,
3605                    "file":"disks/test.qcow2",
3606                    "node-name": "my-node",
3607                    "backing_file_depth":1,
3608                    "bps":1000000,
3609                    "bps_rd":0,
3610                    "bps_wr":0,
3611                    "iops":1000000,
3612                    "iops_rd":0,
3613                    "iops_wr":0,
3614                    "bps_max": 8000000,
3615                    "bps_rd_max": 0,
3616                    "bps_wr_max": 0,
3617                    "iops_max": 0,
3618                    "iops_rd_max": 0,
3619                    "iops_wr_max": 0,
3620                    "iops_size": 0,
3621                    "image":{
3622                       "filename":"disks/test.qcow2",
3623                       "format":"qcow2",
3624                       "virtual-size":2048000,
3625                       "backing_file":"base.qcow2",
3626                       "full-backing-filename":"disks/base.qcow2",
3627                       "backing-filename-format:"qcow2",
3628                       "snapshots":[
3629                          {
3630                             "id": "1",
3631                             "name": "snapshot1",
3632                             "vm-state-size": 0,
3633                             "date-sec": 10000200,
3634                             "date-nsec": 12,
3635                             "vm-clock-sec": 206,
3636                             "vm-clock-nsec": 30
3637                          }
3638                       ],
3639                       "backing-image":{
3640                           "filename":"disks/base.qcow2",
3641                           "format":"qcow2",
3642                           "virtual-size":2048000
3643                       }
3644                    } } ] }
3645
3646 EQMP
3647
3648     {
3649         .name       = "query-memdev",
3650         .args_type  = "",
3651         .mhandler.cmd_new = qmp_marshal_input_query_memdev,
3652     },
3653
3654 SQMP
3655 query-memdev
3656 ------------
3657
3658 Show memory devices information.
3659
3660
3661 Example (1):
3662
3663 -> { "execute": "query-memdev" }
3664 <- { "return": [
3665        {
3666          "size": 536870912,
3667          "merge": false,
3668          "dump": true,
3669          "prealloc": false,
3670          "host-nodes": [0, 1],
3671          "policy": "bind"
3672        },
3673        {
3674          "size": 536870912,
3675          "merge": false,
3676          "dump": true,
3677          "prealloc": true,
3678          "host-nodes": [2, 3],
3679          "policy": "preferred"
3680        }
3681      ]
3682    }
3683
3684 EQMP
3685
3686     {
3687         .name       = "query-memory-devices",
3688         .args_type  = "",
3689         .mhandler.cmd_new = qmp_marshal_input_query_memory_devices,
3690     },
3691
3692 SQMP
3693 @query-memory-devices
3694 --------------------
3695
3696 Return a list of memory devices.
3697
3698 Example:
3699 -> { "execute": "query-memory-devices" }
3700 <- { "return": [ { "data":
3701                       { "addr": 5368709120,
3702                         "hotpluggable": true,
3703                         "hotplugged": true,
3704                         "id": "d1",
3705                         "memdev": "/objects/memX",
3706                         "node": 0,
3707                         "size": 1073741824,
3708                         "slot": 0},
3709                    "type": "dimm"
3710                  } ] }
3711 EQMP
3712
3713     {
3714         .name       = "query-acpi-ospm-status",
3715         .args_type  = "",
3716         .mhandler.cmd_new = qmp_marshal_input_query_acpi_ospm_status,
3717     },
3718
3719 SQMP
3720 @query-acpi-ospm-status
3721 --------------------
3722
3723 Return list of ACPIOSTInfo for devices that support status reporting
3724 via ACPI _OST method.
3725
3726 Example:
3727 -> { "execute": "query-acpi-ospm-status" }
3728 <- { "return": [ { "device": "d1", "slot": "0", "slot-type": "DIMM", "source": 1, "status": 0},
3729                  { "slot": "1", "slot-type": "DIMM", "source": 0, "status": 0},
3730                  { "slot": "2", "slot-type": "DIMM", "source": 0, "status": 0},
3731                  { "slot": "3", "slot-type": "DIMM", "source": 0, "status": 0}
3732    ]}
3733 EQMP
3734
3735 #if defined TARGET_I386
3736     {
3737         .name       = "rtc-reset-reinjection",
3738         .args_type  = "",
3739         .mhandler.cmd_new = qmp_marshal_input_rtc_reset_reinjection,
3740     },
3741 #endif
3742
3743 SQMP
3744 rtc-reset-reinjection
3745 ---------------------
3746
3747 Reset the RTC interrupt reinjection backlog.
3748
3749 Arguments: None.
3750
3751 Example:
3752
3753 -> { "execute": "rtc-reset-reinjection" }
3754 <- { "return": {} }
3755 EQMP
3756
3757     {
3758         .name       = "trace-event-get-state",
3759         .args_type  = "name:s",
3760         .mhandler.cmd_new = qmp_marshal_input_trace_event_get_state,
3761     },
3762
3763 SQMP
3764 trace-event-get-state
3765 ---------------------
3766
3767 Query the state of events.
3768
3769 Example:
3770
3771 -> { "execute": "trace-event-get-state", "arguments": { "name": "qemu_memalign" } }
3772 <- { "return": [ { "name": "qemu_memalign", "state": "disabled" } ] }
3773 EQMP
3774
3775     {
3776         .name       = "trace-event-set-state",
3777         .args_type  = "name:s,enable:b,ignore-unavailable:b?",
3778         .mhandler.cmd_new = qmp_marshal_input_trace_event_set_state,
3779     },
3780
3781 SQMP
3782 trace-event-set-state
3783 ---------------------
3784
3785 Set the state of events.
3786
3787 Example:
3788
3789 -> { "execute": "trace-event-set-state", "arguments": { "name": "qemu_memalign", "enable": "true" } }
3790 <- { "return": {} }
3791 EQMP
3792
3793     {
3794         .name       = "input-send-event",
3795         .args_type  = "console:i?,events:q",
3796         .mhandler.cmd_new = qmp_marshal_input_input_send_event,
3797     },
3798
3799 SQMP
3800 @input-send-event
3801 -----------------
3802
3803 Send input event to guest.
3804
3805 Arguments:
3806
3807 - "console": console index. (json-int, optional)
3808 - "events": list of input events.
3809
3810 The consoles are visible in the qom tree, under
3811 /backend/console[$index]. They have a device link and head property, so
3812 it is possible to map which console belongs to which device and display.
3813
3814 Example (1):
3815
3816 Press left mouse button.
3817
3818 -> { "execute": "input-send-event",
3819     "arguments": { "console": 0,
3820                    "events": [ { "type": "btn",
3821                     "data" : { "down": true, "button": "Left" } } } }
3822 <- { "return": {} }
3823
3824 -> { "execute": "input-send-event",
3825     "arguments": { "console": 0,
3826                    "events": [ { "type": "btn",
3827                     "data" : { "down": false, "button": "Left" } } } }
3828 <- { "return": {} }
3829
3830 Example (2):
3831
3832 Press ctrl-alt-del.
3833
3834 -> { "execute": "input-send-event",
3835      "arguments": { "console": 0, "events": [
3836         { "type": "key", "data" : { "down": true,
3837           "key": {"type": "qcode", "data": "ctrl" } } },
3838         { "type": "key", "data" : { "down": true,
3839           "key": {"type": "qcode", "data": "alt" } } },
3840         { "type": "key", "data" : { "down": true,
3841           "key": {"type": "qcode", "data": "delete" } } } ] } }
3842 <- { "return": {} }
3843
3844 Example (3):
3845
3846 Move mouse pointer to absolute coordinates (20000, 400).
3847
3848 -> { "execute": "input-send-event" ,
3849   "arguments": { "console": 0, "events": [
3850                { "type": "abs", "data" : { "axis": "X", "value" : 20000 } },
3851                { "type": "abs", "data" : { "axis": "Y", "value" : 400 } } ] } }
3852 <- { "return": {} }
3853
3854 EQMP