| blob | 7d9c4bddaf1212be35248fe1fe2651c6b97a4483 |
1 # -*- Mode: Python -*-
2 #
4 ##
5 # = Remote desktop
6 ##
8 { 'include': 'sockets.json' }
10 ##
11 # @set_password:
12 #
13 # Sets the password of a remote display session.
14 #
15 # @protocol: `vnc' to modify the VNC server password
16 # `spice' to modify the Spice server password
17 #
18 # @password: the new password
19 #
20 # @connected: how to handle existing clients when changing the
21 # password. If nothing is specified, defaults to `keep'
22 # `fail' to fail the command if clients are connected
23 # `disconnect' to disconnect existing clients
24 # `keep' to maintain existing clients
25 #
26 # Returns: Nothing on success
27 # If Spice is not enabled, DeviceNotFound
28 #
29 # Since: 0.14.0
30 #
31 # Example:
32 #
33 # -> { "execute": "set_password", "arguments": { "protocol": "vnc",
34 # "password": "secret" } }
35 # <- { "return": {} }
36 #
37 ##
38 { 'command': 'set_password',
39 'data': {'protocol': 'str', 'password': 'str', '*connected': 'str'} }
41 ##
42 # @expire_password:
43 #
44 # Expire the password of a remote display server.
45 #
46 # @protocol: the name of the remote display protocol `vnc' or `spice'
47 #
48 # @time: when to expire the password.
49 # `now' to expire the password immediately
50 # `never' to cancel password expiration
51 # `+INT' where INT is the number of seconds from now (integer)
52 # `INT' where INT is the absolute time in seconds
53 #
54 # Returns: Nothing on success
55 # If @protocol is `spice' and Spice is not active, DeviceNotFound
56 #
57 # Since: 0.14.0
58 #
59 # Notes: Time is relative to the server and currently there is no way to
60 # coordinate server time with client time. It is not recommended to
61 # use the absolute time version of the @time parameter unless you're
62 # sure you are on the same machine as the QEMU instance.
63 #
64 # Example:
65 #
66 # -> { "execute": "expire_password", "arguments": { "protocol": "vnc",
67 # "time": "+60" } }
68 # <- { "return": {} }
69 #
70 ##
71 { 'command': 'expire_password', 'data': {'protocol': 'str', 'time': 'str'} }
73 ##
74 # @screendump:
75 #
76 # Write a PPM of the VGA screen to a file.
77 #
78 # @filename: the path of a new PPM file to store the image
79 #
80 # @device: ID of the display device that should be dumped. If this parameter
81 # is missing, the primary display will be used. (Since 2.12)
82 #
83 # @head: head to use in case the device supports multiple heads. If this
84 # parameter is missing, head #0 will be used. Also note that the head
85 # can only be specified in conjunction with the device ID. (Since 2.12)
86 #
87 # Returns: Nothing on success
88 #
89 # Since: 0.14.0
90 #
91 # Example:
92 #
93 # -> { "execute": "screendump",
94 # "arguments": { "filename": "/tmp/image" } }
95 # <- { "return": {} }
96 #
97 ##
98 { 'command': 'screendump',
99 'data': {'filename': 'str', '*device': 'str', '*head': 'int'} }
101 ##
102 # == Spice
103 ##
105 ##
106 # @SpiceBasicInfo:
107 #
108 # The basic information for SPICE network connection
109 #
110 # @host: IP address
111 #
112 # @port: port number
113 #
114 # @family: address family
115 #
116 # Since: 2.1
117 ##
118 { 'struct': 'SpiceBasicInfo',
119 'data': { 'host': 'str',
120 'port': 'str',
121 'family': 'NetworkAddressFamily' },
122 'if': 'defined(CONFIG_SPICE)' }
124 ##
125 # @SpiceServerInfo:
126 #
127 # Information about a SPICE server
128 #
129 # @auth: authentication method
130 #
131 # Since: 2.1
132 ##
133 { 'struct': 'SpiceServerInfo',
134 'base': 'SpiceBasicInfo',
135 'data': { '*auth': 'str' },
136 'if': 'defined(CONFIG_SPICE)' }
138 ##
139 # @SpiceChannel:
140 #
141 # Information about a SPICE client channel.
142 #
143 # @connection-id: SPICE connection id number. All channels with the same id
144 # belong to the same SPICE session.
145 #
146 # @channel-type: SPICE channel type number. "1" is the main control
147 # channel, filter for this one if you want to track spice
148 # sessions only
149 #
150 # @channel-id: SPICE channel ID number. Usually "0", might be different when
151 # multiple channels of the same type exist, such as multiple
152 # display channels in a multihead setup
153 #
154 # @tls: true if the channel is encrypted, false otherwise.
155 #
156 # Since: 0.14.0
157 ##
158 { 'struct': 'SpiceChannel',
159 'base': 'SpiceBasicInfo',
160 'data': {'connection-id': 'int', 'channel-type': 'int', 'channel-id': 'int',
161 'tls': 'bool'},
162 'if': 'defined(CONFIG_SPICE)' }
164 ##
165 # @SpiceQueryMouseMode:
166 #
167 # An enumeration of Spice mouse states.
168 #
169 # @client: Mouse cursor position is determined by the client.
170 #
171 # @server: Mouse cursor position is determined by the server.
172 #
173 # @unknown: No information is available about mouse mode used by
174 # the spice server.
175 #
176 # Note: spice/enums.h has a SpiceMouseMode already, hence the name.
177 #
178 # Since: 1.1
179 ##
180 { 'enum': 'SpiceQueryMouseMode',
181 'data': [ 'client', 'server', 'unknown' ],
182 'if': 'defined(CONFIG_SPICE)' }
184 ##
185 # @SpiceInfo:
186 #
187 # Information about the SPICE session.
188 #
189 # @enabled: true if the SPICE server is enabled, false otherwise
190 #
191 # @migrated: true if the last guest migration completed and spice
192 # migration had completed as well. false otherwise. (since 1.4)
193 #
194 # @host: The hostname the SPICE server is bound to. This depends on
195 # the name resolution on the host and may be an IP address.
196 #
197 # @port: The SPICE server's port number.
198 #
199 # @compiled-version: SPICE server version.
200 #
201 # @tls-port: The SPICE server's TLS port number.
202 #
203 # @auth: the current authentication type used by the server
204 # 'none' if no authentication is being used
205 # 'spice' uses SASL or direct TLS authentication, depending on command
206 # line options
207 #
208 # @mouse-mode: The mode in which the mouse cursor is displayed currently. Can
209 # be determined by the client or the server, or unknown if spice
210 # server doesn't provide this information. (since: 1.1)
211 #
212 # @channels: a list of @SpiceChannel for each active spice channel
213 #
214 # Since: 0.14.0
215 ##
216 { 'struct': 'SpiceInfo',
217 'data': {'enabled': 'bool', 'migrated': 'bool', '*host': 'str', '*port': 'int',
218 '*tls-port': 'int', '*auth': 'str', '*compiled-version': 'str',
219 'mouse-mode': 'SpiceQueryMouseMode', '*channels': ['SpiceChannel']},
220 'if': 'defined(CONFIG_SPICE)' }
222 ##
223 # @query-spice:
224 #
225 # Returns information about the current SPICE server
226 #
227 # Returns: @SpiceInfo
228 #
229 # Since: 0.14.0
230 #
231 # Example:
232 #
233 # -> { "execute": "query-spice" }
234 # <- { "return": {
235 # "enabled": true,
236 # "auth": "spice",
237 # "port": 5920,
238 # "tls-port": 5921,
239 # "host": "0.0.0.0",
240 # "channels": [
241 # {
242 # "port": "54924",
243 # "family": "ipv4",
244 # "channel-type": 1,
245 # "connection-id": 1804289383,
246 # "host": "127.0.0.1",
247 # "channel-id": 0,
248 # "tls": true
249 # },
250 # {
251 # "port": "36710",
252 # "family": "ipv4",
253 # "channel-type": 4,
254 # "connection-id": 1804289383,
255 # "host": "127.0.0.1",
256 # "channel-id": 0,
257 # "tls": false
258 # },
259 # [ ... more channels follow ... ]
260 # ]
261 # }
262 # }
263 #
264 ##
265 { 'command': 'query-spice', 'returns': 'SpiceInfo',
266 'if': 'defined(CONFIG_SPICE)' }
268 ##
269 # @SPICE_CONNECTED:
270 #
271 # Emitted when a SPICE client establishes a connection
272 #
273 # @server: server information
274 #
275 # @client: client information
276 #
277 # Since: 0.14.0
278 #
279 # Example:
280 #
281 # <- { "timestamp": {"seconds": 1290688046, "microseconds": 388707},
282 # "event": "SPICE_CONNECTED",
283 # "data": {
284 # "server": { "port": "5920", "family": "ipv4", "host": "127.0.0.1"},
285 # "client": {"port": "52873", "family": "ipv4", "host": "127.0.0.1"}
286 # }}
287 #
288 ##
289 { 'event': 'SPICE_CONNECTED',
290 'data': { 'server': 'SpiceBasicInfo',
291 'client': 'SpiceBasicInfo' },
292 'if': 'defined(CONFIG_SPICE)' }
294 ##
295 # @SPICE_INITIALIZED:
296 #
297 # Emitted after initial handshake and authentication takes place (if any)
298 # and the SPICE channel is up and running
299 #
300 # @server: server information
301 #
302 # @client: client information
303 #
304 # Since: 0.14.0
305 #
306 # Example:
307 #
308 # <- { "timestamp": {"seconds": 1290688046, "microseconds": 417172},
309 # "event": "SPICE_INITIALIZED",
310 # "data": {"server": {"auth": "spice", "port": "5921",
311 # "family": "ipv4", "host": "127.0.0.1"},
312 # "client": {"port": "49004", "family": "ipv4", "channel-type": 3,
313 # "connection-id": 1804289383, "host": "127.0.0.1",
314 # "channel-id": 0, "tls": true}
315 # }}
316 #
317 ##
318 { 'event': 'SPICE_INITIALIZED',
319 'data': { 'server': 'SpiceServerInfo',
320 'client': 'SpiceChannel' },
321 'if': 'defined(CONFIG_SPICE)' }
323 ##
324 # @SPICE_DISCONNECTED:
325 #
326 # Emitted when the SPICE connection is closed
327 #
328 # @server: server information
329 #
330 # @client: client information
331 #
332 # Since: 0.14.0
333 #
334 # Example:
335 #
336 # <- { "timestamp": {"seconds": 1290688046, "microseconds": 388707},
337 # "event": "SPICE_DISCONNECTED",
338 # "data": {
339 # "server": { "port": "5920", "family": "ipv4", "host": "127.0.0.1"},
340 # "client": {"port": "52873", "family": "ipv4", "host": "127.0.0.1"}
341 # }}
342 #
343 ##
344 { 'event': 'SPICE_DISCONNECTED',
345 'data': { 'server': 'SpiceBasicInfo',
346 'client': 'SpiceBasicInfo' },
347 'if': 'defined(CONFIG_SPICE)' }
349 ##
350 # @SPICE_MIGRATE_COMPLETED:
351 #
352 # Emitted when SPICE migration has completed
353 #
354 # Since: 1.3
355 #
356 # Example:
357 #
358 # <- { "timestamp": {"seconds": 1290688046, "microseconds": 417172},
359 # "event": "SPICE_MIGRATE_COMPLETED" }
360 #
361 ##
362 { 'event': 'SPICE_MIGRATE_COMPLETED',
363 'if': 'defined(CONFIG_SPICE)' }
365 ##
366 # == VNC
367 ##
369 ##
370 # @VncBasicInfo:
371 #
372 # The basic information for vnc network connection
373 #
374 # @host: IP address
375 #
376 # @service: The service name of the vnc port. This may depend on the host
377 # system's service database so symbolic names should not be relied
378 # on.
379 #
380 # @family: address family
381 #
382 # @websocket: true in case the socket is a websocket (since 2.3).
383 #
384 # Since: 2.1
385 ##
386 { 'struct': 'VncBasicInfo',
387 'data': { 'host': 'str',
388 'service': 'str',
389 'family': 'NetworkAddressFamily',
390 'websocket': 'bool' },
391 'if': 'defined(CONFIG_VNC)' }
393 ##
394 # @VncServerInfo:
395 #
396 # The network connection information for server
397 #
398 # @auth: authentication method used for
399 # the plain (non-websocket) VNC server
400 #
401 # Since: 2.1
402 ##
403 { 'struct': 'VncServerInfo',
404 'base': 'VncBasicInfo',
405 'data': { '*auth': 'str' },
406 'if': 'defined(CONFIG_VNC)' }
408 ##
409 # @VncClientInfo:
410 #
411 # Information about a connected VNC client.
412 #
413 # @x509_dname: If x509 authentication is in use, the Distinguished
414 # Name of the client.
415 #
416 # @sasl_username: If SASL authentication is in use, the SASL username
417 # used for authentication.
418 #
419 # Since: 0.14.0
420 ##
421 { 'struct': 'VncClientInfo',
422 'base': 'VncBasicInfo',
423 'data': { '*x509_dname': 'str', '*sasl_username': 'str' },
424 'if': 'defined(CONFIG_VNC)' }
426 ##
427 # @VncInfo:
428 #
429 # Information about the VNC session.
430 #
431 # @enabled: true if the VNC server is enabled, false otherwise
432 #
433 # @host: The hostname the VNC server is bound to. This depends on
434 # the name resolution on the host and may be an IP address.
435 #
436 # @family: 'ipv6' if the host is listening for IPv6 connections
437 # 'ipv4' if the host is listening for IPv4 connections
438 # 'unix' if the host is listening on a unix domain socket
439 # 'unknown' otherwise
440 #
441 # @service: The service name of the server's port. This may depends
442 # on the host system's service database so symbolic names should not
443 # be relied on.
444 #
445 # @auth: the current authentication type used by the server
446 # 'none' if no authentication is being used
447 # 'vnc' if VNC authentication is being used
448 # 'vencrypt+plain' if VEncrypt is used with plain text authentication
449 # 'vencrypt+tls+none' if VEncrypt is used with TLS and no authentication
450 # 'vencrypt+tls+vnc' if VEncrypt is used with TLS and VNC authentication
451 # 'vencrypt+tls+plain' if VEncrypt is used with TLS and plain text auth
452 # 'vencrypt+x509+none' if VEncrypt is used with x509 and no auth
453 # 'vencrypt+x509+vnc' if VEncrypt is used with x509 and VNC auth
454 # 'vencrypt+x509+plain' if VEncrypt is used with x509 and plain text auth
455 # 'vencrypt+tls+sasl' if VEncrypt is used with TLS and SASL auth
456 # 'vencrypt+x509+sasl' if VEncrypt is used with x509 and SASL auth
457 #
458 # @clients: a list of @VncClientInfo of all currently connected clients
459 #
460 # Since: 0.14.0
461 ##
462 { 'struct': 'VncInfo',
463 'data': {'enabled': 'bool', '*host': 'str',
464 '*family': 'NetworkAddressFamily',
465 '*service': 'str', '*auth': 'str', '*clients': ['VncClientInfo']},
466 'if': 'defined(CONFIG_VNC)' }
468 ##
469 # @VncPrimaryAuth:
470 #
471 # vnc primary authentication method.
472 #
473 # Since: 2.3
474 ##
475 { 'enum': 'VncPrimaryAuth',
476 'data': [ 'none', 'vnc', 'ra2', 'ra2ne', 'tight', 'ultra',
477 'tls', 'vencrypt', 'sasl' ],
478 'if': 'defined(CONFIG_VNC)' }
480 ##
481 # @VncVencryptSubAuth:
482 #
483 # vnc sub authentication method with vencrypt.
484 #
485 # Since: 2.3
486 ##
487 { 'enum': 'VncVencryptSubAuth',
488 'data': [ 'plain',
489 'tls-none', 'x509-none',
490 'tls-vnc', 'x509-vnc',
491 'tls-plain', 'x509-plain',
492 'tls-sasl', 'x509-sasl' ],
493 'if': 'defined(CONFIG_VNC)' }
495 ##
496 # @VncServerInfo2:
497 #
498 # The network connection information for server
499 #
500 # @auth: The current authentication type used by the servers
501 #
502 # @vencrypt: The vencrypt sub authentication type used by the
503 # servers, only specified in case auth == vencrypt.
504 #
505 # Since: 2.9
506 ##
507 { 'struct': 'VncServerInfo2',
508 'base': 'VncBasicInfo',
509 'data': { 'auth' : 'VncPrimaryAuth',
510 '*vencrypt' : 'VncVencryptSubAuth' },
511 'if': 'defined(CONFIG_VNC)' }
513 ##
514 # @VncInfo2:
515 #
516 # Information about a vnc server
517 #
518 # @id: vnc server name.
519 #
520 # @server: A list of @VncBasincInfo describing all listening sockets.
521 # The list can be empty (in case the vnc server is disabled).
522 # It also may have multiple entries: normal + websocket,
523 # possibly also ipv4 + ipv6 in the future.
524 #
525 # @clients: A list of @VncClientInfo of all currently connected clients.
526 # The list can be empty, for obvious reasons.
527 #
528 # @auth: The current authentication type used by the non-websockets servers
529 #
530 # @vencrypt: The vencrypt authentication type used by the servers,
531 # only specified in case auth == vencrypt.
532 #
533 # @display: The display device the vnc server is linked to.
534 #
535 # Since: 2.3
536 ##
537 { 'struct': 'VncInfo2',
538 'data': { 'id' : 'str',
539 'server' : ['VncServerInfo2'],
540 'clients' : ['VncClientInfo'],
541 'auth' : 'VncPrimaryAuth',
542 '*vencrypt' : 'VncVencryptSubAuth',
543 '*display' : 'str' },
544 'if': 'defined(CONFIG_VNC)' }
546 ##
547 # @query-vnc:
548 #
549 # Returns information about the current VNC server
550 #
551 # Returns: @VncInfo
552 #
553 # Since: 0.14.0
554 #
555 # Example:
556 #
557 # -> { "execute": "query-vnc" }
558 # <- { "return": {
559 # "enabled":true,
560 # "host":"0.0.0.0",
561 # "service":"50402",
562 # "auth":"vnc",
563 # "family":"ipv4",
564 # "clients":[
565 # {
566 # "host":"127.0.0.1",
567 # "service":"50401",
568 # "family":"ipv4"
569 # }
570 # ]
571 # }
572 # }
573 #
574 ##
575 { 'command': 'query-vnc', 'returns': 'VncInfo',
576 'if': 'defined(CONFIG_VNC)' }
577 ##
578 # @query-vnc-servers:
579 #
580 # Returns a list of vnc servers. The list can be empty.
581 #
582 # Returns: a list of @VncInfo2
583 #
584 # Since: 2.3
585 ##
586 { 'command': 'query-vnc-servers', 'returns': ['VncInfo2'],
587 'if': 'defined(CONFIG_VNC)' }
589 ##
590 # @change-vnc-password:
591 #
592 # Change the VNC server password.
593 #
594 # @password: the new password to use with VNC authentication
595 #
596 # Since: 1.1
597 #
598 # Notes: An empty password in this command will set the password to the empty
599 # string. Existing clients are unaffected by executing this command.
600 ##
601 { 'command': 'change-vnc-password',
602 'data': { 'password': 'str' },
603 'if': 'defined(CONFIG_VNC)' }
605 ##
606 # @VNC_CONNECTED:
607 #
608 # Emitted when a VNC client establishes a connection
609 #
610 # @server: server information
611 #
612 # @client: client information
613 #
614 # Note: This event is emitted before any authentication takes place, thus
615 # the authentication ID is not provided
616 #
617 # Since: 0.13.0
618 #
619 # Example:
620 #
621 # <- { "event": "VNC_CONNECTED",
622 # "data": {
623 # "server": { "auth": "sasl", "family": "ipv4",
624 # "service": "5901", "host": "0.0.0.0" },
625 # "client": { "family": "ipv4", "service": "58425",
626 # "host": "127.0.0.1" } },
627 # "timestamp": { "seconds": 1262976601, "microseconds": 975795 } }
628 #
629 ##
630 { 'event': 'VNC_CONNECTED',
631 'data': { 'server': 'VncServerInfo',
632 'client': 'VncBasicInfo' },
633 'if': 'defined(CONFIG_VNC)' }
635 ##
636 # @VNC_INITIALIZED:
637 #
638 # Emitted after authentication takes place (if any) and the VNC session is
639 # made active
640 #
641 # @server: server information
642 #
643 # @client: client information
644 #
645 # Since: 0.13.0
646 #
647 # Example:
648 #
649 # <- { "event": "VNC_INITIALIZED",
650 # "data": {
651 # "server": { "auth": "sasl", "family": "ipv4",
652 # "service": "5901", "host": "0.0.0.0"},
653 # "client": { "family": "ipv4", "service": "46089",
654 # "host": "127.0.0.1", "sasl_username": "luiz" } },
655 # "timestamp": { "seconds": 1263475302, "microseconds": 150772 } }
656 #
657 ##
658 { 'event': 'VNC_INITIALIZED',
659 'data': { 'server': 'VncServerInfo',
660 'client': 'VncClientInfo' },
661 'if': 'defined(CONFIG_VNC)' }
663 ##
664 # @VNC_DISCONNECTED:
665 #
666 # Emitted when the connection is closed
667 #
668 # @server: server information
669 #
670 # @client: client information
671 #
672 # Since: 0.13.0
673 #
674 # Example:
675 #
676 # <- { "event": "VNC_DISCONNECTED",
677 # "data": {
678 # "server": { "auth": "sasl", "family": "ipv4",
679 # "service": "5901", "host": "0.0.0.0" },
680 # "client": { "family": "ipv4", "service": "58425",
681 # "host": "127.0.0.1", "sasl_username": "luiz" } },
682 # "timestamp": { "seconds": 1262976601, "microseconds": 975795 } }
683 #
684 ##
685 { 'event': 'VNC_DISCONNECTED',
686 'data': { 'server': 'VncServerInfo',
687 'client': 'VncClientInfo' },
688 'if': 'defined(CONFIG_VNC)' }
690 ##
691 # = Input
692 ##
694 ##
695 # @MouseInfo:
696 #
697 # Information about a mouse device.
698 #
699 # @name: the name of the mouse device
700 #
701 # @index: the index of the mouse device
702 #
703 # @current: true if this device is currently receiving mouse events
704 #
705 # @absolute: true if this device supports absolute coordinates as input
706 #
707 # Since: 0.14.0
708 ##
709 { 'struct': 'MouseInfo',
710 'data': {'name': 'str', 'index': 'int', 'current': 'bool',
711 'absolute': 'bool'} }
713 ##
714 # @query-mice:
715 #
716 # Returns information about each active mouse device
717 #
718 # Returns: a list of @MouseInfo for each device
719 #
720 # Since: 0.14.0
721 #
722 # Example:
723 #
724 # -> { "execute": "query-mice" }
725 # <- { "return": [
726 # {
727 # "name":"QEMU Microsoft Mouse",
728 # "index":0,
729 # "current":false,
730 # "absolute":false
731 # },
732 # {
733 # "name":"QEMU PS/2 Mouse",
734 # "index":1,
735 # "current":true,
736 # "absolute":true
737 # }
738 # ]
739 # }
740 #
741 ##
742 { 'command': 'query-mice', 'returns': ['MouseInfo'] }
744 ##
745 # @QKeyCode:
746 #
747 # An enumeration of key name.
748 #
749 # This is used by the @send-key command.
750 #
751 # @unmapped: since 2.0
752 # @pause: since 2.0
753 # @ro: since 2.4
754 # @kp_comma: since 2.4
755 # @kp_equals: since 2.6
756 # @power: since 2.6
757 # @hiragana: since 2.9
758 # @henkan: since 2.9
759 # @yen: since 2.9
760 #
761 # @sleep: since 2.10
762 # @wake: since 2.10
763 # @audionext: since 2.10
764 # @audioprev: since 2.10
765 # @audiostop: since 2.10
766 # @audioplay: since 2.10
767 # @audiomute: since 2.10
768 # @volumeup: since 2.10
769 # @volumedown: since 2.10
770 # @mediaselect: since 2.10
771 # @mail: since 2.10
772 # @calculator: since 2.10
773 # @computer: since 2.10
774 # @ac_home: since 2.10
775 # @ac_back: since 2.10
776 # @ac_forward: since 2.10
777 # @ac_refresh: since 2.10
778 # @ac_bookmarks: since 2.10
779 # altgr, altgr_r: dropped in 2.10
780 #
781 # @muhenkan: since 2.12
782 # @katakanahiragana: since 2.12
783 #
784 # 'sysrq' was mistakenly added to hack around the fact that
785 # the ps2 driver was not generating correct scancodes sequences
786 # when 'alt+print' was pressed. This flaw is now fixed and the
787 # 'sysrq' key serves no further purpose. Any further use of
788 # 'sysrq' will be transparently changed to 'print', so they
789 # are effectively synonyms.
790 #
791 # Since: 1.3.0
792 #
793 ##
794 { 'enum': 'QKeyCode',
795 'data': [ 'unmapped',
796 'shift', 'shift_r', 'alt', 'alt_r', 'ctrl',
797 'ctrl_r', 'menu', 'esc', '1', '2', '3', '4', '5', '6', '7', '8',
798 '9', '0', 'minus', 'equal', 'backspace', 'tab', 'q', 'w', 'e',
799 'r', 't', 'y', 'u', 'i', 'o', 'p', 'bracket_left', 'bracket_right',
800 'ret', 'a', 's', 'd', 'f', 'g', 'h', 'j', 'k', 'l', 'semicolon',
801 'apostrophe', 'grave_accent', 'backslash', 'z', 'x', 'c', 'v', 'b',
802 'n', 'm', 'comma', 'dot', 'slash', 'asterisk', 'spc', 'caps_lock',
803 'f1', 'f2', 'f3', 'f4', 'f5', 'f6', 'f7', 'f8', 'f9', 'f10',
804 'num_lock', 'scroll_lock', 'kp_divide', 'kp_multiply',
805 'kp_subtract', 'kp_add', 'kp_enter', 'kp_decimal', 'sysrq', 'kp_0',
806 'kp_1', 'kp_2', 'kp_3', 'kp_4', 'kp_5', 'kp_6', 'kp_7', 'kp_8',
807 'kp_9', 'less', 'f11', 'f12', 'print', 'home', 'pgup', 'pgdn', 'end',
808 'left', 'up', 'down', 'right', 'insert', 'delete', 'stop', 'again',
809 'props', 'undo', 'front', 'copy', 'open', 'paste', 'find', 'cut',
810 'lf', 'help', 'meta_l', 'meta_r', 'compose', 'pause',
811 'ro', 'hiragana', 'henkan', 'yen', 'muhenkan', 'katakanahiragana',
812 'kp_comma', 'kp_equals', 'power', 'sleep', 'wake',
813 'audionext', 'audioprev', 'audiostop', 'audioplay', 'audiomute',
814 'volumeup', 'volumedown', 'mediaselect',
815 'mail', 'calculator', 'computer',
816 'ac_home', 'ac_back', 'ac_forward', 'ac_refresh', 'ac_bookmarks' ] }
818 ##
819 # @KeyValue:
820 #
821 # Represents a keyboard key.
822 #
823 # Since: 1.3.0
824 ##
825 { 'union': 'KeyValue',
826 'data': {
827 'number': 'int',
828 'qcode': 'QKeyCode' } }
830 ##
831 # @send-key:
832 #
833 # Send keys to guest.
834 #
835 # @keys: An array of @KeyValue elements. All @KeyValues in this array are
836 # simultaneously sent to the guest. A @KeyValue.number value is sent
837 # directly to the guest, while @KeyValue.qcode must be a valid
838 # @QKeyCode value
839 #
840 # @hold-time: time to delay key up events, milliseconds. Defaults
841 # to 100
842 #
843 # Returns: Nothing on success
844 # If key is unknown or redundant, InvalidParameter
845 #
846 # Since: 1.3.0
847 #
848 # Example:
849 #
850 # -> { "execute": "send-key",
851 # "arguments": { "keys": [ { "type": "qcode", "data": "ctrl" },
852 # { "type": "qcode", "data": "alt" },
853 # { "type": "qcode", "data": "delete" } ] } }
854 # <- { "return": {} }
855 #
856 ##
857 { 'command': 'send-key',
858 'data': { 'keys': ['KeyValue'], '*hold-time': 'int' } }
860 ##
861 # @InputButton:
862 #
863 # Button of a pointer input device (mouse, tablet).
864 #
865 # @side: front side button of a 5-button mouse (since 2.9)
866 #
867 # @extra: rear side button of a 5-button mouse (since 2.9)
868 #
869 # Since: 2.0
870 ##
871 { 'enum' : 'InputButton',
872 'data' : [ 'left', 'middle', 'right', 'wheel-up', 'wheel-down', 'side',
873 'extra' ] }
875 ##
876 # @InputAxis:
877 #
878 # Position axis of a pointer input device (mouse, tablet).
879 #
880 # Since: 2.0
881 ##
882 { 'enum' : 'InputAxis',
883 'data' : [ 'x', 'y' ] }
885 ##
886 # @InputKeyEvent:
887 #
888 # Keyboard input event.
889 #
890 # @key: Which key this event is for.
891 # @down: True for key-down and false for key-up events.
892 #
893 # Since: 2.0
894 ##
895 { 'struct' : 'InputKeyEvent',
896 'data' : { 'key' : 'KeyValue',
897 'down' : 'bool' } }
899 ##
900 # @InputBtnEvent:
901 #
902 # Pointer button input event.
903 #
904 # @button: Which button this event is for.
905 # @down: True for key-down and false for key-up events.
906 #
907 # Since: 2.0
908 ##
909 { 'struct' : 'InputBtnEvent',
910 'data' : { 'button' : 'InputButton',
911 'down' : 'bool' } }
913 ##
914 # @InputMoveEvent:
915 #
916 # Pointer motion input event.
917 #
918 # @axis: Which axis is referenced by @value.
919 # @value: Pointer position. For absolute coordinates the
920 # valid range is 0 -> 0x7ffff
921 #
922 # Since: 2.0
923 ##
924 { 'struct' : 'InputMoveEvent',
925 'data' : { 'axis' : 'InputAxis',
926 'value' : 'int' } }
928 ##
929 # @InputEvent:
930 #
931 # Input event union.
932 #
933 # @type: the input type, one of:
934 # - 'key': Input event of Keyboard
935 # - 'btn': Input event of pointer buttons
936 # - 'rel': Input event of relative pointer motion
937 # - 'abs': Input event of absolute pointer motion
938 #
939 # Since: 2.0
940 ##
941 { 'union' : 'InputEvent',
942 'data' : { 'key' : 'InputKeyEvent',
943 'btn' : 'InputBtnEvent',
944 'rel' : 'InputMoveEvent',
945 'abs' : 'InputMoveEvent' } }
947 ##
948 # @input-send-event:
949 #
950 # Send input event(s) to guest.
951 #
952 # @device: display device to send event(s) to.
953 # @head: head to send event(s) to, in case the
954 # display device supports multiple scanouts.
955 # @events: List of InputEvent union.
956 #
957 # Returns: Nothing on success.
958 #
959 # The @device and @head parameters can be used to send the input event
960 # to specific input devices in case (a) multiple input devices of the
961 # same kind are added to the virtual machine and (b) you have
962 # configured input routing (see docs/multiseat.txt) for those input
963 # devices. The parameters work exactly like the device and head
964 # properties of input devices. If @device is missing, only devices
965 # that have no input routing config are admissible. If @device is
966 # specified, both input devices with and without input routing config
967 # are admissible, but devices with input routing config take
968 # precedence.
969 #
970 # Since: 2.6
971 #
972 # Note: The consoles are visible in the qom tree, under
973 # /backend/console[$index]. They have a device link and head property,
974 # so it is possible to map which console belongs to which device and
975 # display.
976 #
977 # Example:
978 #
979 # 1. Press left mouse button.
980 #
981 # -> { "execute": "input-send-event",
982 # "arguments": { "device": "video0",
983 # "events": [ { "type": "btn",
984 # "data" : { "down": true, "button": "left" } } ] } }
985 # <- { "return": {} }
986 #
987 # -> { "execute": "input-send-event",
988 # "arguments": { "device": "video0",
989 # "events": [ { "type": "btn",
990 # "data" : { "down": false, "button": "left" } } ] } }
991 # <- { "return": {} }
992 #
993 # 2. Press ctrl-alt-del.
994 #
995 # -> { "execute": "input-send-event",
996 # "arguments": { "events": [
997 # { "type": "key", "data" : { "down": true,
998 # "key": {"type": "qcode", "data": "ctrl" } } },
999 # { "type": "key", "data" : { "down": true,
1000 # "key": {"type": "qcode", "data": "alt" } } },
1001 # { "type": "key", "data" : { "down": true,
1002 # "key": {"type": "qcode", "data": "delete" } } } ] } }
1003 # <- { "return": {} }
1004 #
1005 # 3. Move mouse pointer to absolute coordinates (20000, 400).
1006 #
1007 # -> { "execute": "input-send-event" ,
1008 # "arguments": { "events": [
1009 # { "type": "abs", "data" : { "axis": "x", "value" : 20000 } },
1010 # { "type": "abs", "data" : { "axis": "y", "value" : 400 } } ] } }
1011 # <- { "return": {} }
1012 #
1013 ##
1014 { 'command': 'input-send-event',
1015 'data': { '*device': 'str',
1016 '*head' : 'int',
1017 'events' : [ 'InputEvent' ] } }
1019 ##
1020 # @GrabToggleKeys:
1021 #
1022 # Keys to toggle input-linux between host and guest.
1023 #
1024 # Since: 4.0
1025 #
1026 ##
1027 { 'enum': 'GrabToggleKeys',
1028 'data': [ 'ctrl-ctrl', 'alt-alt', 'meta-meta', 'scrolllock', 'ctrl-scrolllock' ] }
1030 ##
1031 # @DisplayGTK:
1032 #
1033 # GTK display options.
1034 #
1035 # @grab-on-hover: Grab keyboard input on mouse hover.
1036 # @zoom-to-fit: Zoom guest display to fit into the host window. When
1037 # turned off the host window will be resized instead.
1038 # In case the display device can notify the guest on
1039 # window resizes (virtio-gpu) this will default to "on",
1040 # assuming the guest will resize the display to match
1041 # the window size then. Otherwise it defaults to "off".
1042 # Since 3.1
1043 #
1044 # Since: 2.12
1045 #
1046 ##
1047 { 'struct' : 'DisplayGTK',
1048 'data' : { '*grab-on-hover' : 'bool',
1049 '*zoom-to-fit' : 'bool' } }
1051 ##
1052 # @DisplayEGLHeadless:
1053 #
1054 # EGL headless display options.
1055 #
1056 # @rendernode: Which DRM render node should be used. Default is the first
1057 # available node on the host.
1058 #
1059 # Since: 3.1
1060 #
1061 ##
1062 { 'struct' : 'DisplayEGLHeadless',
1063 'data' : { '*rendernode' : 'str' } }
1065 ##
1066 # @DisplayGLMode:
1067 #
1068 # Display OpenGL mode.
1069 #
1070 # @off: Disable OpenGL (default).
1071 # @on: Use OpenGL, pick context type automatically.
1072 # Would better be named 'auto' but is called 'on' for backward
1073 # compatibility with bool type.
1074 # @core: Use OpenGL with Core (desktop) Context.
1075 # @es: Use OpenGL with ES (embedded systems) Context.
1076 #
1077 # Since: 3.0
1078 #
1079 ##
1080 { 'enum' : 'DisplayGLMode',
1081 'data' : [ 'off', 'on', 'core', 'es' ] }
1083 ##
1084 # @DisplayType:
1085 #
1086 # Display (user interface) type.
1087 #
1088 # Since: 2.12
1089 #
1090 ##
1091 { 'enum' : 'DisplayType',
1092 'data' : [ 'default', 'none', 'gtk', 'sdl',
1093 'egl-headless', 'curses', 'cocoa' ] }
1095 ##
1096 # @DisplayOptions:
1097 #
1098 # Display (user interface) options.
1099 #
1100 # @type: Which DisplayType qemu should use.
1101 # @full-screen: Start user interface in fullscreen mode (default: off).
1102 # @window-close: Allow to quit qemu with window close button (default: on).
1103 # @gl: Enable OpenGL support (default: off).
1104 #
1105 # Since: 2.12
1106 #
1107 ##
1108 { 'union' : 'DisplayOptions',
1109 'base' : { 'type' : 'DisplayType',
1110 '*full-screen' : 'bool',
1111 '*window-close' : 'bool',
1112 '*gl' : 'DisplayGLMode' },
1113 'discriminator' : 'type',
1114 'data' : { 'gtk' : 'DisplayGTK',
1115 'egl-headless' : 'DisplayEGLHeadless'} }
1117 ##
1118 # @query-display-options:
1119 #
1120 # Returns information about display configuration
1121 #
1122 # Returns: @DisplayOptions
1123 #
1124 # Since: 3.1
1125 #
1126 ##
1127 { 'command': 'query-display-options',
1128 'returns': 'DisplayOptions' }