hw/misc/cbus.c

   1 /*
   2  * CBUS three-pin bus and the Retu / Betty / Tahvo / Vilma / Avilma /
   3  * Hinku / Vinku / Ahne / Pihi chips used in various Nokia platforms.
   4  * Based on reverse-engineering of a linux driver.
   5  *
   6  * Copyright (C) 2008 Nokia Corporation
   7  * Written by Andrzej Zaborowski <andrew@openedhand.com>
   8  *
   9  * This program is free software; you can redistribute it and/or
  10  * modify it under the terms of the GNU General Public License as
  11  * published by the Free Software Foundation; either version 2 or
  12  * (at your option) version 3 of the License.
  13  *
  14  * This program is distributed in the hope that it will be useful,
  15  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17  * GNU General Public License for more details.
  18  *
  19  * You should have received a copy of the GNU General Public License along
  20  * with this program; if not, see <http://www.gnu.org/licenses/>.
  21  */
  22
  23 #include "qemu/osdep.h"
  24 #include "hw/hw.h"
  25 #include "hw/irq.h"
  26 #include "hw/misc/cbus.h"
  27 #include "sysemu/runstate.h"
  28
  29 //#define DEBUG
  30
  31 typedef struct {
  32     void *opaque;
  33     void (*io)(void *opaque, int rw, int reg, uint16_t *val);
  34     int addr;
  35 } CBusSlave;
  36
  37 typedef struct {
  38     CBus cbus;
  39
  40     int sel;
  41     int dat;
  42     int clk;
  43     int bit;
  44     int dir;
  45     uint16_t val;
  46     qemu_irq dat_out;
  47
  48     int addr;
  49     int reg;
  50     int rw;
  51     enum {
  52         cbus_address,
  53         cbus_value,
  54     } cycle;
  55
  56     CBusSlave *slave[8];
  57 } CBusPriv;
  58
  59 static void cbus_io(CBusPriv *s)
  60 {
  61     if (s->slave[s->addr])
  62         s->slave[s->addr]->io(s->slave[s->addr]->opaque,
  63                         s->rw, s->reg, &s->val);
  64     else
  65         hw_error("%s: bad slave address %i\n", __func__, s->addr);
  66 }
  67
  68 static void cbus_cycle(CBusPriv *s)
  69 {
  70     switch (s->cycle) {
  71     case cbus_address:
  72         s->addr = (s->val >> 6) & 7;
  73         s->rw =   (s->val >> 5) & 1;
  74         s->reg =  (s->val >> 0) & 0x1f;
  75
  76         s->cycle = cbus_value;
  77         s->bit = 15;
  78         s->dir = !s->rw;
  79         s->val = 0;
  80
  81         if (s->rw)
  82             cbus_io(s);
  83         break;
  84
  85     case cbus_value:
  86         if (!s->rw)
  87             cbus_io(s);
  88
  89         s->cycle = cbus_address;
  90         s->bit = 8;
  91         s->dir = 1;
  92         s->val = 0;
  93         break;
  94     }
  95 }
  96
  97 static void cbus_clk(void *opaque, int line, int level)
  98 {
  99     CBusPriv *s = (CBusPriv *) opaque;
 100
 101     if (!s->sel && level && !s->clk) {
 102         if (s->dir)
 103             s->val |= s->dat << (s->bit --);
 104         else
 105             qemu_set_irq(s->dat_out, (s->val >> (s->bit --)) & 1);
 106
 107         if (s->bit < 0)
 108             cbus_cycle(s);
 109     }
 110
 111     s->clk = level;
 112 }
 113
 114 static void cbus_dat(void *opaque, int line, int level)
 115 {
 116     CBusPriv *s = (CBusPriv *) opaque;
 117
 118     s->dat = level;
 119 }
 120
 121 static void cbus_sel(void *opaque, int line, int level)
 122 {
 123     CBusPriv *s = (CBusPriv *) opaque;
 124
 125     if (!level) {
 126         s->dir = 1;
 127         s->bit = 8;
 128         s->val = 0;
 129     }
 130
 131     s->sel = level;
 132 }
 133
 134 CBus *cbus_init(qemu_irq dat)
 135 {
 136     CBusPriv *s = (CBusPriv *) g_malloc0(sizeof(*s));
 137
 138     s->dat_out = dat;
 139     s->cbus.clk = qemu_allocate_irq(cbus_clk, s, 0);
 140     s->cbus.dat = qemu_allocate_irq(cbus_dat, s, 0);
 141     s->cbus.sel = qemu_allocate_irq(cbus_sel, s, 0);
 142
 143     s->sel = 1;
 144     s->clk = 0;
 145     s->dat = 0;
 146
 147     return &s->cbus;
 148 }
 149
 150 void cbus_attach(CBus *bus, void *slave_opaque)
 151 {
 152     CBusSlave *slave = (CBusSlave *) slave_opaque;
 153     CBusPriv *s = (CBusPriv *) bus;
 154
 155     s->slave[slave->addr] = slave;
 156 }
 157
 158 /* Retu/Vilma */
 159 typedef struct {
 160     uint16_t irqst;
 161     uint16_t irqen;
 162     uint16_t cc[2];
 163     int channel;
 164     uint16_t result[16];
 165     uint16_t sample;
 166     uint16_t status;
 167
 168     struct {
 169         uint16_t cal;
 170     } rtc;
 171
 172     int is_vilma;
 173     qemu_irq irq;
 174     CBusSlave cbus;
 175 } CBusRetu;
 176
 177 static void retu_interrupt_update(CBusRetu *s)
 178 {
 179     qemu_set_irq(s->irq, s->irqst & ~s->irqen);
 180 }
 181
 182 #define RETU_REG_ASICR          0x00    /* (RO) ASIC ID & revision */
 183 #define RETU_REG_IDR            0x01    /* (T)  Interrupt ID */
 184 #define RETU_REG_IMR            0x02    /* (RW) Interrupt mask */
 185 #define RETU_REG_RTCDSR         0x03    /* (RW) RTC seconds register */
 186 #define RETU_REG_RTCHMR         0x04    /* (RO) RTC hours and minutes reg */
 187 #define RETU_REG_RTCHMAR        0x05    /* (RW) RTC hours and minutes set reg */
 188 #define RETU_REG_RTCCALR        0x06    /* (RW) RTC calibration register */
 189 #define RETU_REG_ADCR           0x08    /* (RW) ADC result register */
 190 #define RETU_REG_ADCSCR         0x09    /* (RW) ADC sample control register */
 191 #define RETU_REG_AFCR           0x0a    /* (RW) AFC register */
 192 #define RETU_REG_ANTIFR         0x0b    /* (RW) AntiF register */
 193 #define RETU_REG_CALIBR         0x0c    /* (RW) CalibR register*/
 194 #define RETU_REG_CCR1           0x0d    /* (RW) Common control register 1 */
 195 #define RETU_REG_CCR2           0x0e    /* (RW) Common control register 2 */
 196 #define RETU_REG_RCTRL_CLR      0x0f    /* (T)  Regulator clear register */
 197 #define RETU_REG_RCTRL_SET      0x10    /* (T)  Regulator set register */
 198 #define RETU_REG_TXCR           0x11    /* (RW) TxC register */
 199 #define RETU_REG_STATUS         0x16    /* (RO) Status register */
 200 #define RETU_REG_WATCHDOG       0x17    /* (RW) Watchdog register */
 201 #define RETU_REG_AUDTXR         0x18    /* (RW) Audio Codec Tx register */
 202 #define RETU_REG_AUDPAR         0x19    /* (RW) AudioPA register */
 203 #define RETU_REG_AUDRXR1        0x1a    /* (RW) Audio receive register 1 */
 204 #define RETU_REG_AUDRXR2        0x1b    /* (RW) Audio receive register 2 */
 205 #define RETU_REG_SGR1           0x1c    /* (RW) */
 206 #define RETU_REG_SCR1           0x1d    /* (RW) */
 207 #define RETU_REG_SGR2           0x1e    /* (RW) */
 208 #define RETU_REG_SCR2           0x1f    /* (RW) */
 209
 210 /* Retu Interrupt sources */
 211 enum {
 212     retu_int_pwr        = 0,    /* Power button */
 213     retu_int_char       = 1,    /* Charger */
 214     retu_int_rtcs       = 2,    /* Seconds */
 215     retu_int_rtcm       = 3,    /* Minutes */
 216     retu_int_rtcd       = 4,    /* Days */
 217     retu_int_rtca       = 5,    /* Alarm */
 218     retu_int_hook       = 6,    /* Hook */
 219     retu_int_head       = 7,    /* Headset */
 220     retu_int_adcs       = 8,    /* ADC sample */
 221 };
 222
 223 /* Retu ADC channel wiring */
 224 enum {
 225     retu_adc_bsi        = 1,    /* BSI */
 226     retu_adc_batt_temp  = 2,    /* Battery temperature */
 227     retu_adc_chg_volt   = 3,    /* Charger voltage */
 228     retu_adc_head_det   = 4,    /* Headset detection */
 229     retu_adc_hook_det   = 5,    /* Hook detection */
 230     retu_adc_rf_gp      = 6,    /* RF GP */
 231     retu_adc_tx_det     = 7,    /* Wideband Tx detection */
 232     retu_adc_batt_volt  = 8,    /* Battery voltage */
 233     retu_adc_sens       = 10,   /* Light sensor */
 234     retu_adc_sens_temp  = 11,   /* Light sensor temperature */
 235     retu_adc_bbatt_volt = 12,   /* Backup battery voltage */
 236     retu_adc_self_temp  = 13,   /* RETU temperature */
 237 };
 238
 239 static inline uint16_t retu_read(CBusRetu *s, int reg)
 240 {
 241 #ifdef DEBUG
 242     printf("RETU read at %02x\n", reg);
 243 #endif
 244
 245     switch (reg) {
 246     case RETU_REG_ASICR:
 247         return 0x0215 | (s->is_vilma << 7);
 248
 249     case RETU_REG_IDR:  /* TODO: Or is this ffs(s->irqst)?  */
 250         return s->irqst;
 251
 252     case RETU_REG_IMR:
 253         return s->irqen;
 254
 255     case RETU_REG_RTCDSR:
 256     case RETU_REG_RTCHMR:
 257     case RETU_REG_RTCHMAR:
 258         /* TODO */
 259         return 0x0000;
 260
 261     case RETU_REG_RTCCALR:
 262         return s->rtc.cal;
 263
 264     case RETU_REG_ADCR:
 265         return (s->channel << 10) | s->result[s->channel];
 266     case RETU_REG_ADCSCR:
 267         return s->sample;
 268
 269     case RETU_REG_AFCR:
 270     case RETU_REG_ANTIFR:
 271     case RETU_REG_CALIBR:
 272         /* TODO */
 273         return 0x0000;
 274
 275     case RETU_REG_CCR1:
 276         return s->cc[0];
 277     case RETU_REG_CCR2:
 278         return s->cc[1];
 279
 280     case RETU_REG_RCTRL_CLR:
 281     case RETU_REG_RCTRL_SET:
 282     case RETU_REG_TXCR:
 283         /* TODO */
 284         return 0x0000;
 285
 286     case RETU_REG_STATUS:
 287         return s->status;
 288
 289     case RETU_REG_WATCHDOG:
 290     case RETU_REG_AUDTXR:
 291     case RETU_REG_AUDPAR:
 292     case RETU_REG_AUDRXR1:
 293     case RETU_REG_AUDRXR2:
 294     case RETU_REG_SGR1:
 295     case RETU_REG_SCR1:
 296     case RETU_REG_SGR2:
 297     case RETU_REG_SCR2:
 298         /* TODO */
 299         return 0x0000;
 300
 301     default:
 302         hw_error("%s: bad register %02x\n", __func__, reg);
 303     }
 304 }
 305
 306 static inline void retu_write(CBusRetu *s, int reg, uint16_t val)
 307 {
 308 #ifdef DEBUG
 309     printf("RETU write of %04x at %02x\n", val, reg);
 310 #endif
 311
 312     switch (reg) {
 313     case RETU_REG_IDR:
 314         s->irqst ^= val;
 315         retu_interrupt_update(s);
 316         break;
 317
 318     case RETU_REG_IMR:
 319         s->irqen = val;
 320         retu_interrupt_update(s);
 321         break;
 322
 323     case RETU_REG_RTCDSR:
 324     case RETU_REG_RTCHMAR:
 325         /* TODO */
 326         break;
 327
 328     case RETU_REG_RTCCALR:
 329         s->rtc.cal = val;
 330         break;
 331
 332     case RETU_REG_ADCR:
 333         s->channel = (val >> 10) & 0xf;
 334         s->irqst |= 1 << retu_int_adcs;
 335         retu_interrupt_update(s);
 336         break;
 337     case RETU_REG_ADCSCR:
 338         s->sample &= ~val;
 339         break;
 340
 341     case RETU_REG_AFCR:
 342     case RETU_REG_ANTIFR:
 343     case RETU_REG_CALIBR:
 344
 345     case RETU_REG_CCR1:
 346         s->cc[0] = val;
 347         break;
 348     case RETU_REG_CCR2:
 349         s->cc[1] = val;
 350         break;
 351
 352     case RETU_REG_RCTRL_CLR:
 353     case RETU_REG_RCTRL_SET:
 354         /* TODO */
 355         break;
 356
 357     case RETU_REG_WATCHDOG:
 358         if (val == 0 && (s->cc[0] & 2))
 359             qemu_system_shutdown_request(SHUTDOWN_CAUSE_GUEST_SHUTDOWN);
 360         break;
 361
 362     case RETU_REG_TXCR:
 363     case RETU_REG_AUDTXR:
 364     case RETU_REG_AUDPAR:
 365     case RETU_REG_AUDRXR1:
 366     case RETU_REG_AUDRXR2:
 367     case RETU_REG_SGR1:
 368     case RETU_REG_SCR1:
 369     case RETU_REG_SGR2:
 370     case RETU_REG_SCR2:
 371         /* TODO */
 372         break;
 373
 374     default:
 375         hw_error("%s: bad register %02x\n", __func__, reg);
 376     }
 377 }
 378
 379 static void retu_io(void *opaque, int rw, int reg, uint16_t *val)
 380 {
 381     CBusRetu *s = (CBusRetu *) opaque;
 382
 383     if (rw)
 384         *val = retu_read(s, reg);
 385     else
 386         retu_write(s, reg, *val);
 387 }
 388
 389 void *retu_init(qemu_irq irq, int vilma)
 390 {
 391     CBusRetu *s = (CBusRetu *) g_malloc0(sizeof(*s));
 392
 393     s->irq = irq;
 394     s->irqen = 0xffff;
 395     s->irqst = 0x0000;
 396     s->status = 0x0020;
 397     s->is_vilma = !!vilma;
 398     s->rtc.cal = 0x01;
 399     s->result[retu_adc_bsi] = 0x3c2;
 400     s->result[retu_adc_batt_temp] = 0x0fc;
 401     s->result[retu_adc_chg_volt] = 0x165;
 402     s->result[retu_adc_head_det] = 123;
 403     s->result[retu_adc_hook_det] = 1023;
 404     s->result[retu_adc_rf_gp] = 0x11;
 405     s->result[retu_adc_tx_det] = 0x11;
 406     s->result[retu_adc_batt_volt] = 0x250;
 407     s->result[retu_adc_sens] = 2;
 408     s->result[retu_adc_sens_temp] = 0x11;
 409     s->result[retu_adc_bbatt_volt] = 0x3d0;
 410     s->result[retu_adc_self_temp] = 0x330;
 411
 412     s->cbus.opaque = s;
 413     s->cbus.io = retu_io;
 414     s->cbus.addr = 1;
 415
 416     return &s->cbus;
 417 }
 418
 419 void retu_key_event(void *retu, int state)
 420 {
 421     CBusSlave *slave = (CBusSlave *) retu;
 422     CBusRetu *s = (CBusRetu *) slave->opaque;
 423
 424     s->irqst |= 1 << retu_int_pwr;
 425     retu_interrupt_update(s);
 426
 427     if (state)
 428         s->status &= ~(1 << 5);
 429     else
 430         s->status |= 1 << 5;
 431 }
 432
 433 #if 0
 434 static void retu_head_event(void *retu, int state)
 435 {
 436     CBusSlave *slave = (CBusSlave *) retu;
 437     CBusRetu *s = (CBusRetu *) slave->opaque;
 438
 439     if ((s->cc[0] & 0x500) == 0x500) {  /* TODO: Which bits? */
 440         /* TODO: reissue the interrupt every 100ms or so.  */
 441         s->irqst |= 1 << retu_int_head;
 442         retu_interrupt_update(s);
 443     }
 444
 445     if (state)
 446         s->result[retu_adc_head_det] = 50;
 447     else
 448         s->result[retu_adc_head_det] = 123;
 449 }
 450
 451 static void retu_hook_event(void *retu, int state)
 452 {
 453     CBusSlave *slave = (CBusSlave *) retu;
 454     CBusRetu *s = (CBusRetu *) slave->opaque;
 455
 456     if ((s->cc[0] & 0x500) == 0x500) {
 457         /* TODO: reissue the interrupt every 100ms or so.  */
 458         s->irqst |= 1 << retu_int_hook;
 459         retu_interrupt_update(s);
 460     }
 461
 462     if (state)
 463         s->result[retu_adc_hook_det] = 50;
 464     else
 465         s->result[retu_adc_hook_det] = 123;
 466 }
 467 #endif
 468
 469 /* Tahvo/Betty */
 470 typedef struct {
 471     uint16_t irqst;
 472     uint16_t irqen;
 473     uint8_t charger;
 474     uint8_t backlight;
 475     uint16_t usbr;
 476     uint16_t power;
 477
 478     int is_betty;
 479     qemu_irq irq;
 480     CBusSlave cbus;
 481 } CBusTahvo;
 482
 483 static void tahvo_interrupt_update(CBusTahvo *s)
 484 {
 485     qemu_set_irq(s->irq, s->irqst & ~s->irqen);
 486 }
 487
 488 #define TAHVO_REG_ASICR         0x00    /* (RO) ASIC ID & revision */
 489 #define TAHVO_REG_IDR           0x01    /* (T)  Interrupt ID */
 490 #define TAHVO_REG_IDSR          0x02    /* (RO) Interrupt status */
 491 #define TAHVO_REG_IMR           0x03    /* (RW) Interrupt mask */
 492 #define TAHVO_REG_CHAPWMR       0x04    /* (RW) Charger PWM */
 493 #define TAHVO_REG_LEDPWMR       0x05    /* (RW) LED PWM */
 494 #define TAHVO_REG_USBR          0x06    /* (RW) USB control */
 495 #define TAHVO_REG_RCR           0x07    /* (RW) Some kind of power management */
 496 #define TAHVO_REG_CCR1          0x08    /* (RW) Common control register 1 */
 497 #define TAHVO_REG_CCR2          0x09    /* (RW) Common control register 2 */
 498 #define TAHVO_REG_TESTR1        0x0a    /* (RW) Test register 1 */
 499 #define TAHVO_REG_TESTR2        0x0b    /* (RW) Test register 2 */
 500 #define TAHVO_REG_NOPR          0x0c    /* (RW) Number of periods */
 501 #define TAHVO_REG_FRR           0x0d    /* (RO) FR */
 502
 503 static inline uint16_t tahvo_read(CBusTahvo *s, int reg)
 504 {
 505 #ifdef DEBUG
 506     printf("TAHVO read at %02x\n", reg);
 507 #endif
 508
 509     switch (reg) {
 510     case TAHVO_REG_ASICR:
 511         return 0x0021 | (s->is_betty ? 0x0b00 : 0x0300);        /* 22 in N810 */
 512
 513     case TAHVO_REG_IDR:
 514     case TAHVO_REG_IDSR:        /* XXX: what does this do?  */
 515         return s->irqst;
 516
 517     case TAHVO_REG_IMR:
 518         return s->irqen;
 519
 520     case TAHVO_REG_CHAPWMR:
 521         return s->charger;
 522
 523     case TAHVO_REG_LEDPWMR:
 524         return s->backlight;
 525
 526     case TAHVO_REG_USBR:
 527         return s->usbr;
 528
 529     case TAHVO_REG_RCR:
 530         return s->power;
 531
 532     case TAHVO_REG_CCR1:
 533     case TAHVO_REG_CCR2:
 534     case TAHVO_REG_TESTR1:
 535     case TAHVO_REG_TESTR2:
 536     case TAHVO_REG_NOPR:
 537     case TAHVO_REG_FRR:
 538         return 0x0000;
 539
 540     default:
 541         hw_error("%s: bad register %02x\n", __func__, reg);
 542     }
 543 }
 544
 545 static inline void tahvo_write(CBusTahvo *s, int reg, uint16_t val)
 546 {
 547 #ifdef DEBUG
 548     printf("TAHVO write of %04x at %02x\n", val, reg);
 549 #endif
 550
 551     switch (reg) {
 552     case TAHVO_REG_IDR:
 553         s->irqst ^= val;
 554         tahvo_interrupt_update(s);
 555         break;
 556
 557     case TAHVO_REG_IMR:
 558         s->irqen = val;
 559         tahvo_interrupt_update(s);
 560         break;
 561
 562     case TAHVO_REG_CHAPWMR:
 563         s->charger = val;
 564         break;
 565
 566     case TAHVO_REG_LEDPWMR:
 567         if (s->backlight != (val & 0x7f)) {
 568             s->backlight = val & 0x7f;
 569             printf("%s: LCD backlight now at %i / 127\n",
 570                             __func__, s->backlight);
 571         }
 572         break;
 573
 574     case TAHVO_REG_USBR:
 575         s->usbr = val;
 576         break;
 577
 578     case TAHVO_REG_RCR:
 579         s->power = val;
 580         break;
 581
 582     case TAHVO_REG_CCR1:
 583     case TAHVO_REG_CCR2:
 584     case TAHVO_REG_TESTR1:
 585     case TAHVO_REG_TESTR2:
 586     case TAHVO_REG_NOPR:
 587     case TAHVO_REG_FRR:
 588         break;
 589
 590     default:
 591         hw_error("%s: bad register %02x\n", __func__, reg);
 592     }
 593 }
 594
 595 static void tahvo_io(void *opaque, int rw, int reg, uint16_t *val)
 596 {
 597     CBusTahvo *s = (CBusTahvo *) opaque;
 598
 599     if (rw)
 600         *val = tahvo_read(s, reg);
 601     else
 602         tahvo_write(s, reg, *val);
 603 }
 604
 605 void *tahvo_init(qemu_irq irq, int betty)
 606 {
 607     CBusTahvo *s = (CBusTahvo *) g_malloc0(sizeof(*s));
 608
 609     s->irq = irq;
 610     s->irqen = 0xffff;
 611     s->irqst = 0x0000;
 612     s->is_betty = !!betty;
 613
 614     s->cbus.opaque = s;
 615     s->cbus.io = tahvo_io;
 616     s->cbus.addr = 2;
 617
 618     return &s->cbus;
 619 }