target-ppc: Fix rlwimi, rlwinm, rlwnm again
[qemu.git] / hw / intc / puv3_intc.c
blobef8488aacc40424982fa4c0d726e79fe8604f604
1 /*
2 * INTC device simulation in PKUnity SoC
4 * Copyright (C) 2010-2012 Guan Xuetao
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation, or any later version.
9 * See the COPYING file in the top-level directory.
11 #include "qemu/osdep.h"
12 #include "hw/sysbus.h"
14 #undef DEBUG_PUV3
15 #include "hw/unicore32/puv3.h"
17 #define TYPE_PUV3_INTC "puv3_intc"
18 #define PUV3_INTC(obj) OBJECT_CHECK(PUV3INTCState, (obj), TYPE_PUV3_INTC)
20 typedef struct PUV3INTCState {
21 SysBusDevice parent_obj;
23 MemoryRegion iomem;
24 qemu_irq parent_irq;
26 uint32_t reg_ICMR;
27 uint32_t reg_ICPR;
28 } PUV3INTCState;
30 /* Update interrupt status after enabled or pending bits have been changed. */
31 static void puv3_intc_update(PUV3INTCState *s)
33 if (s->reg_ICMR & s->reg_ICPR) {
34 qemu_irq_raise(s->parent_irq);
35 } else {
36 qemu_irq_lower(s->parent_irq);
40 /* Process a change in an external INTC input. */
41 static void puv3_intc_handler(void *opaque, int irq, int level)
43 PUV3INTCState *s = opaque;
45 DPRINTF("irq 0x%x, level 0x%x\n", irq, level);
46 if (level) {
47 s->reg_ICPR |= (1 << irq);
48 } else {
49 s->reg_ICPR &= ~(1 << irq);
51 puv3_intc_update(s);
54 static uint64_t puv3_intc_read(void *opaque, hwaddr offset,
55 unsigned size)
57 PUV3INTCState *s = opaque;
58 uint32_t ret = 0;
60 switch (offset) {
61 case 0x04: /* INTC_ICMR */
62 ret = s->reg_ICMR;
63 break;
64 case 0x0c: /* INTC_ICIP */
65 ret = s->reg_ICPR; /* the same value with ICPR */
66 break;
67 default:
68 DPRINTF("Bad offset %x\n", (int)offset);
70 DPRINTF("offset 0x%x, value 0x%x\n", offset, ret);
71 return ret;
74 static void puv3_intc_write(void *opaque, hwaddr offset,
75 uint64_t value, unsigned size)
77 PUV3INTCState *s = opaque;
79 DPRINTF("offset 0x%x, value 0x%x\n", offset, value);
80 switch (offset) {
81 case 0x00: /* INTC_ICLR */
82 case 0x14: /* INTC_ICCR */
83 break;
84 case 0x04: /* INTC_ICMR */
85 s->reg_ICMR = value;
86 break;
87 default:
88 DPRINTF("Bad offset 0x%x\n", (int)offset);
89 return;
91 puv3_intc_update(s);
94 static const MemoryRegionOps puv3_intc_ops = {
95 .read = puv3_intc_read,
96 .write = puv3_intc_write,
97 .impl = {
98 .min_access_size = 4,
99 .max_access_size = 4,
101 .endianness = DEVICE_NATIVE_ENDIAN,
104 static int puv3_intc_init(SysBusDevice *sbd)
106 DeviceState *dev = DEVICE(sbd);
107 PUV3INTCState *s = PUV3_INTC(dev);
109 qdev_init_gpio_in(dev, puv3_intc_handler, PUV3_IRQS_NR);
110 sysbus_init_irq(sbd, &s->parent_irq);
112 s->reg_ICMR = 0;
113 s->reg_ICPR = 0;
115 memory_region_init_io(&s->iomem, OBJECT(s), &puv3_intc_ops, s, "puv3_intc",
116 PUV3_REGS_OFFSET);
117 sysbus_init_mmio(sbd, &s->iomem);
119 return 0;
122 static void puv3_intc_class_init(ObjectClass *klass, void *data)
124 SysBusDeviceClass *sdc = SYS_BUS_DEVICE_CLASS(klass);
126 sdc->init = puv3_intc_init;
129 static const TypeInfo puv3_intc_info = {
130 .name = TYPE_PUV3_INTC,
131 .parent = TYPE_SYS_BUS_DEVICE,
132 .instance_size = sizeof(PUV3INTCState),
133 .class_init = puv3_intc_class_init,
136 static void puv3_intc_register_type(void)
138 type_register_static(&puv3_intc_info);
141 type_init(puv3_intc_register_type)