hw/usb-msd.c

   1 /*
   2  * USB Mass Storage Device emulation
   3  *
   4  * Copyright (c) 2006 CodeSourcery.
   5  * Written by Paul Brook
   6  *
   7  * This code is licenced under the LGPL.
   8  */
   9
  10 #include "qemu-common.h"
  11 #include "usb.h"
  12 #include "block.h"
  13 #include "scsi-disk.h"
  14 #include "console.h"
  15
  16 //#define DEBUG_MSD
  17
  18 #ifdef DEBUG_MSD
  19 #define DPRINTF(fmt, ...) \
  20 do { printf("usb-msd: " fmt , ## __VA_ARGS__); } while (0)
  21 #else
  22 #define DPRINTF(fmt, ...) do {} while(0)
  23 #endif
  24
  25 /* USB requests.  */
  26 #define MassStorageReset  0xff
  27 #define GetMaxLun         0xfe
  28
  29 enum USBMSDMode {
  30     USB_MSDM_CBW, /* Command Block.  */
  31     USB_MSDM_DATAOUT, /* Tranfer data to device.  */
  32     USB_MSDM_DATAIN, /* Transfer data from device.  */
  33     USB_MSDM_CSW /* Command Status.  */
  34 };
  35
  36 typedef struct {
  37     USBDevice dev;
  38     enum USBMSDMode mode;
  39     uint32_t scsi_len;
  40     uint8_t *scsi_buf;
  41     uint32_t usb_len;
  42     uint8_t *usb_buf;
  43     uint32_t data_len;
  44     uint32_t residue;
  45     uint32_t tag;
  46     BlockDriverState *bs;
  47     SCSIDevice *scsi_dev;
  48     int result;
  49     /* For async completion.  */
  50     USBPacket *packet;
  51 } MSDState;
  52
  53 struct usb_msd_cbw {
  54     uint32_t sig;
  55     uint32_t tag;
  56     uint32_t data_len;
  57     uint8_t flags;
  58     uint8_t lun;
  59     uint8_t cmd_len;
  60     uint8_t cmd[16];
  61 };
  62
  63 struct usb_msd_csw {
  64     uint32_t sig;
  65     uint32_t tag;
  66     uint32_t residue;
  67     uint8_t status;
  68 };
  69
  70 static const uint8_t qemu_msd_dev_descriptor[] = {
  71         0x12,       /*  u8 bLength; */
  72         0x01,       /*  u8 bDescriptorType; Device */
  73         0x00, 0x01, /*  u16 bcdUSB; v1.0 */
  74
  75         0x00,       /*  u8  bDeviceClass; */
  76         0x00,       /*  u8  bDeviceSubClass; */
  77         0x00,       /*  u8  bDeviceProtocol; [ low/full speeds only ] */
  78         0x08,       /*  u8  bMaxPacketSize0; 8 Bytes */
  79
  80         /* Vendor and product id are arbitrary.  */
  81         0x00, 0x00, /*  u16 idVendor; */
  82         0x00, 0x00, /*  u16 idProduct; */
  83         0x00, 0x00, /*  u16 bcdDevice */
  84
  85         0x01,       /*  u8  iManufacturer; */
  86         0x02,       /*  u8  iProduct; */
  87         0x03,       /*  u8  iSerialNumber; */
  88         0x01        /*  u8  bNumConfigurations; */
  89 };
  90
  91 static const uint8_t qemu_msd_config_descriptor[] = {
  92
  93         /* one configuration */
  94         0x09,       /*  u8  bLength; */
  95         0x02,       /*  u8  bDescriptorType; Configuration */
  96         0x20, 0x00, /*  u16 wTotalLength; */
  97         0x01,       /*  u8  bNumInterfaces; (1) */
  98         0x01,       /*  u8  bConfigurationValue; */
  99         0x00,       /*  u8  iConfiguration; */
 100         0xc0,       /*  u8  bmAttributes;
 101                                  Bit 7: must be set,
 102                                      6: Self-powered,
 103                                      5: Remote wakeup,
 104                                      4..0: resvd */
 105         0x00,       /*  u8  MaxPower; */
 106
 107         /* one interface */
 108         0x09,       /*  u8  if_bLength; */
 109         0x04,       /*  u8  if_bDescriptorType; Interface */
 110         0x00,       /*  u8  if_bInterfaceNumber; */
 111         0x00,       /*  u8  if_bAlternateSetting; */
 112         0x02,       /*  u8  if_bNumEndpoints; */
 113         0x08,       /*  u8  if_bInterfaceClass; MASS STORAGE */
 114         0x06,       /*  u8  if_bInterfaceSubClass; SCSI */
 115         0x50,       /*  u8  if_bInterfaceProtocol; Bulk Only */
 116         0x00,       /*  u8  if_iInterface; */
 117
 118         /* Bulk-In endpoint */
 119         0x07,       /*  u8  ep_bLength; */
 120         0x05,       /*  u8  ep_bDescriptorType; Endpoint */
 121         0x81,       /*  u8  ep_bEndpointAddress; IN Endpoint 1 */
 122         0x02,       /*  u8  ep_bmAttributes; Bulk */
 123         0x40, 0x00, /*  u16 ep_wMaxPacketSize; */
 124         0x00,       /*  u8  ep_bInterval; */
 125
 126         /* Bulk-Out endpoint */
 127         0x07,       /*  u8  ep_bLength; */
 128         0x05,       /*  u8  ep_bDescriptorType; Endpoint */
 129         0x02,       /*  u8  ep_bEndpointAddress; OUT Endpoint 2 */
 130         0x02,       /*  u8  ep_bmAttributes; Bulk */
 131         0x40, 0x00, /*  u16 ep_wMaxPacketSize; */
 132         0x00        /*  u8  ep_bInterval; */
 133 };
 134
 135 static void usb_msd_copy_data(MSDState *s)
 136 {
 137     uint32_t len;
 138     len = s->usb_len;
 139     if (len > s->scsi_len)
 140         len = s->scsi_len;
 141     if (s->mode == USB_MSDM_DATAIN) {
 142         memcpy(s->usb_buf, s->scsi_buf, len);
 143     } else {
 144         memcpy(s->scsi_buf, s->usb_buf, len);
 145     }
 146     s->usb_len -= len;
 147     s->scsi_len -= len;
 148     s->usb_buf += len;
 149     s->scsi_buf += len;
 150     s->data_len -= len;
 151     if (s->scsi_len == 0) {
 152         if (s->mode == USB_MSDM_DATAIN) {
 153             s->scsi_dev->read_data(s->scsi_dev, s->tag);
 154         } else if (s->mode == USB_MSDM_DATAOUT) {
 155             s->scsi_dev->write_data(s->scsi_dev, s->tag);
 156         }
 157     }
 158 }
 159
 160 static void usb_msd_send_status(MSDState *s)
 161 {
 162     struct usb_msd_csw csw;
 163
 164     csw.sig = cpu_to_le32(0x53425355);
 165     csw.tag = cpu_to_le32(s->tag);
 166     csw.residue = s->residue;
 167     csw.status = s->result;
 168     memcpy(s->usb_buf, &csw, 13);
 169 }
 170
 171 static void usb_msd_command_complete(void *opaque, int reason, uint32_t tag,
 172                                      uint32_t arg)
 173 {
 174     MSDState *s = (MSDState *)opaque;
 175     USBPacket *p = s->packet;
 176
 177     if (tag != s->tag) {
 178         fprintf(stderr, "usb-msd: Unexpected SCSI Tag 0x%x\n", tag);
 179     }
 180     if (reason == SCSI_REASON_DONE) {
 181         DPRINTF("Command complete %d\n", arg);
 182         s->residue = s->data_len;
 183         s->result = arg != 0;
 184         if (s->packet) {
 185             if (s->data_len == 0 && s->mode == USB_MSDM_DATAOUT) {
 186                 /* A deferred packet with no write data remaining must be
 187                    the status read packet.  */
 188                 usb_msd_send_status(s);
 189                 s->mode = USB_MSDM_CBW;
 190             } else {
 191                 if (s->data_len) {
 192                     s->data_len -= s->usb_len;
 193                     if (s->mode == USB_MSDM_DATAIN)
 194                         memset(s->usb_buf, 0, s->usb_len);
 195                     s->usb_len = 0;
 196                 }
 197                 if (s->data_len == 0)
 198                     s->mode = USB_MSDM_CSW;
 199             }
 200             s->packet = NULL;
 201             usb_packet_complete(p);
 202         } else if (s->data_len == 0) {
 203             s->mode = USB_MSDM_CSW;
 204         }
 205         return;
 206     }
 207     s->scsi_len = arg;
 208     s->scsi_buf = s->scsi_dev->get_buf(s->scsi_dev, tag);
 209     if (p) {
 210         usb_msd_copy_data(s);
 211         if (s->usb_len == 0) {
 212             /* Set s->packet to NULL before calling usb_packet_complete
 213                because annother request may be issued before
 214                usb_packet_complete returns.  */
 215             DPRINTF("Packet complete %p\n", p);
 216             s->packet = NULL;
 217             usb_packet_complete(p);
 218         }
 219     }
 220 }
 221
 222 static void usb_msd_handle_reset(USBDevice *dev)
 223 {
 224     MSDState *s = (MSDState *)dev;
 225
 226     DPRINTF("Reset\n");
 227     s->mode = USB_MSDM_CBW;
 228 }
 229
 230 static int usb_msd_handle_control(USBDevice *dev, int request, int value,
 231                                   int index, int length, uint8_t *data)
 232 {
 233     MSDState *s = (MSDState *)dev;
 234     int ret = 0;
 235
 236     switch (request) {
 237     case DeviceRequest | USB_REQ_GET_STATUS:
 238         data[0] = (1 << USB_DEVICE_SELF_POWERED) |
 239             (dev->remote_wakeup << USB_DEVICE_REMOTE_WAKEUP);
 240         data[1] = 0x00;
 241         ret = 2;
 242         break;
 243     case DeviceOutRequest | USB_REQ_CLEAR_FEATURE:
 244         if (value == USB_DEVICE_REMOTE_WAKEUP) {
 245             dev->remote_wakeup = 0;
 246         } else {
 247             goto fail;
 248         }
 249         ret = 0;
 250         break;
 251     case DeviceOutRequest | USB_REQ_SET_FEATURE:
 252         if (value == USB_DEVICE_REMOTE_WAKEUP) {
 253             dev->remote_wakeup = 1;
 254         } else {
 255             goto fail;
 256         }
 257         ret = 0;
 258         break;
 259     case DeviceOutRequest | USB_REQ_SET_ADDRESS:
 260         dev->addr = value;
 261         ret = 0;
 262         break;
 263     case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
 264         switch(value >> 8) {
 265         case USB_DT_DEVICE:
 266             memcpy(data, qemu_msd_dev_descriptor,
 267                    sizeof(qemu_msd_dev_descriptor));
 268             ret = sizeof(qemu_msd_dev_descriptor);
 269             break;
 270         case USB_DT_CONFIG:
 271             memcpy(data, qemu_msd_config_descriptor,
 272                    sizeof(qemu_msd_config_descriptor));
 273             ret = sizeof(qemu_msd_config_descriptor);
 274             break;
 275         case USB_DT_STRING:
 276             switch(value & 0xff) {
 277             case 0:
 278                 /* language ids */
 279                 data[0] = 4;
 280                 data[1] = 3;
 281                 data[2] = 0x09;
 282                 data[3] = 0x04;
 283                 ret = 4;
 284                 break;
 285             case 1:
 286                 /* vendor description */
 287                 ret = set_usb_string(data, "QEMU " QEMU_VERSION);
 288                 break;
 289             case 2:
 290                 /* product description */
 291                 ret = set_usb_string(data, "QEMU USB HARDDRIVE");
 292                 break;
 293             case 3:
 294                 /* serial number */
 295                 ret = set_usb_string(data, "1");
 296                 break;
 297             default:
 298                 goto fail;
 299             }
 300             break;
 301         default:
 302             goto fail;
 303         }
 304         break;
 305     case DeviceRequest | USB_REQ_GET_CONFIGURATION:
 306         data[0] = 1;
 307         ret = 1;
 308         break;
 309     case DeviceOutRequest | USB_REQ_SET_CONFIGURATION:
 310         ret = 0;
 311         break;
 312     case DeviceRequest | USB_REQ_GET_INTERFACE:
 313         data[0] = 0;
 314         ret = 1;
 315         break;
 316     case DeviceOutRequest | USB_REQ_SET_INTERFACE:
 317         ret = 0;
 318         break;
 319     case EndpointOutRequest | USB_REQ_CLEAR_FEATURE:
 320         if (value == 0 && index != 0x81) { /* clear ep halt */
 321             goto fail;
 322         }
 323         ret = 0;
 324         break;
 325         /* Class specific requests.  */
 326     case MassStorageReset:
 327         /* Reset state ready for the next CBW.  */
 328         s->mode = USB_MSDM_CBW;
 329         ret = 0;
 330         break;
 331     case GetMaxLun:
 332         data[0] = 0;
 333         ret = 1;
 334         break;
 335     default:
 336     fail:
 337         ret = USB_RET_STALL;
 338         break;
 339     }
 340     return ret;
 341 }
 342
 343 static void usb_msd_cancel_io(USBPacket *p, void *opaque)
 344 {
 345     MSDState *s = opaque;
 346     s->scsi_dev->cancel_io(s->scsi_dev, s->tag);
 347     s->packet = NULL;
 348     s->scsi_len = 0;
 349 }
 350
 351 static int usb_msd_handle_data(USBDevice *dev, USBPacket *p)
 352 {
 353     MSDState *s = (MSDState *)dev;
 354     int ret = 0;
 355     struct usb_msd_cbw cbw;
 356     uint8_t devep = p->devep;
 357     uint8_t *data = p->data;
 358     int len = p->len;
 359
 360     switch (p->pid) {
 361     case USB_TOKEN_OUT:
 362         if (devep != 2)
 363             goto fail;
 364
 365         switch (s->mode) {
 366         case USB_MSDM_CBW:
 367             if (len != 31) {
 368                 fprintf(stderr, "usb-msd: Bad CBW size");
 369                 goto fail;
 370             }
 371             memcpy(&cbw, data, 31);
 372             if (le32_to_cpu(cbw.sig) != 0x43425355) {
 373                 fprintf(stderr, "usb-msd: Bad signature %08x\n",
 374                         le32_to_cpu(cbw.sig));
 375                 goto fail;
 376             }
 377             DPRINTF("Command on LUN %d\n", cbw.lun);
 378             if (cbw.lun != 0) {
 379                 fprintf(stderr, "usb-msd: Bad LUN %d\n", cbw.lun);
 380                 goto fail;
 381             }
 382             s->tag = le32_to_cpu(cbw.tag);
 383             s->data_len = le32_to_cpu(cbw.data_len);
 384             if (s->data_len == 0) {
 385                 s->mode = USB_MSDM_CSW;
 386             } else if (cbw.flags & 0x80) {
 387                 s->mode = USB_MSDM_DATAIN;
 388             } else {
 389                 s->mode = USB_MSDM_DATAOUT;
 390             }
 391             DPRINTF("Command tag 0x%x flags %08x len %d data %d\n",
 392                     s->tag, cbw.flags, cbw.cmd_len, s->data_len);
 393             s->residue = 0;
 394             s->scsi_dev->send_command(s->scsi_dev, s->tag, cbw.cmd, 0);
 395             /* ??? Should check that USB and SCSI data transfer
 396                directions match.  */
 397             if (s->residue == 0) {
 398                 if (s->mode == USB_MSDM_DATAIN) {
 399                     s->scsi_dev->read_data(s->scsi_dev, s->tag);
 400                 } else if (s->mode == USB_MSDM_DATAOUT) {
 401                     s->scsi_dev->write_data(s->scsi_dev, s->tag);
 402                 }
 403             }
 404             ret = len;
 405             break;
 406
 407         case USB_MSDM_DATAOUT:
 408             DPRINTF("Data out %d/%d\n", len, s->data_len);
 409             if (len > s->data_len)
 410                 goto fail;
 411
 412             s->usb_buf = data;
 413             s->usb_len = len;
 414             if (s->scsi_len) {
 415                 usb_msd_copy_data(s);
 416             }
 417             if (s->residue && s->usb_len) {
 418                 s->data_len -= s->usb_len;
 419                 if (s->data_len == 0)
 420                     s->mode = USB_MSDM_CSW;
 421                 s->usb_len = 0;
 422             }
 423             if (s->usb_len) {
 424                 DPRINTF("Deferring packet %p\n", p);
 425                 usb_defer_packet(p, usb_msd_cancel_io, s);
 426                 s->packet = p;
 427                 ret = USB_RET_ASYNC;
 428             } else {
 429                 ret = len;
 430             }
 431             break;
 432
 433         default:
 434             DPRINTF("Unexpected write (len %d)\n", len);
 435             goto fail;
 436         }
 437         break;
 438
 439     case USB_TOKEN_IN:
 440         if (devep != 1)
 441             goto fail;
 442
 443         switch (s->mode) {
 444         case USB_MSDM_DATAOUT:
 445             if (s->data_len != 0 || len < 13)
 446                 goto fail;
 447             /* Waiting for SCSI write to complete.  */
 448             usb_defer_packet(p, usb_msd_cancel_io, s);
 449             s->packet = p;
 450             ret = USB_RET_ASYNC;
 451             break;
 452
 453         case USB_MSDM_CSW:
 454             DPRINTF("Command status %d tag 0x%x, len %d\n",
 455                     s->result, s->tag, len);
 456             if (len < 13)
 457                 goto fail;
 458
 459             s->usb_len = len;
 460             s->usb_buf = data;
 461             usb_msd_send_status(s);
 462             s->mode = USB_MSDM_CBW;
 463             ret = 13;
 464             break;
 465
 466         case USB_MSDM_DATAIN:
 467             DPRINTF("Data in %d/%d\n", len, s->data_len);
 468             if (len > s->data_len)
 469                 len = s->data_len;
 470             s->usb_buf = data;
 471             s->usb_len = len;
 472             if (s->scsi_len) {
 473                 usb_msd_copy_data(s);
 474             }
 475             if (s->residue && s->usb_len) {
 476                 s->data_len -= s->usb_len;
 477                 memset(s->usb_buf, 0, s->usb_len);
 478                 if (s->data_len == 0)
 479                     s->mode = USB_MSDM_CSW;
 480                 s->usb_len = 0;
 481             }
 482             if (s->usb_len) {
 483                 DPRINTF("Deferring packet %p\n", p);
 484                 usb_defer_packet(p, usb_msd_cancel_io, s);
 485                 s->packet = p;
 486                 ret = USB_RET_ASYNC;
 487             } else {
 488                 ret = len;
 489             }
 490             break;
 491
 492         default:
 493             DPRINTF("Unexpected read (len %d)\n", len);
 494             goto fail;
 495         }
 496         break;
 497
 498     default:
 499         DPRINTF("Bad token\n");
 500     fail:
 501         ret = USB_RET_STALL;
 502         break;
 503     }
 504
 505     return ret;
 506 }
 507
 508 static void usb_msd_handle_destroy(USBDevice *dev)
 509 {
 510     MSDState *s = (MSDState *)dev;
 511
 512     s->scsi_dev->destroy(s->scsi_dev);
 513     bdrv_delete(s->bs);
 514     qemu_free(s);
 515 }
 516
 517 USBDevice *usb_msd_init(const char *filename)
 518 {
 519     MSDState *s;
 520     BlockDriverState *bdrv;
 521     BlockDriver *drv = NULL;
 522     const char *p1;
 523     char fmt[32];
 524
 525     p1 = strchr(filename, ':');
 526     if (p1++) {
 527         const char *p2;
 528
 529         if (strstart(filename, "format=", &p2)) {
 530             int len = MIN(p1 - p2, sizeof(fmt));
 531             pstrcpy(fmt, len, p2);
 532
 533             drv = bdrv_find_format(fmt);
 534             if (!drv) {
 535                 printf("invalid format %s\n", fmt);
 536                 return NULL;
 537             }
 538         } else if (*filename != ':') {
 539             printf("unrecognized USB mass-storage option %s\n", filename);
 540             return NULL;
 541         }
 542
 543         filename = p1;
 544     }
 545
 546     if (!*filename) {
 547         printf("block device specification needed\n");
 548         return NULL;
 549     }
 550
 551     s = qemu_mallocz(sizeof(MSDState));
 552
 553     bdrv = bdrv_new("usb");
 554     if (bdrv_open2(bdrv, filename, 0, drv) < 0)
 555         goto fail;
 556     s->bs = bdrv;
 557
 558     s->dev.speed = USB_SPEED_FULL;
 559     s->dev.handle_packet = usb_generic_handle_packet;
 560
 561     s->dev.handle_reset = usb_msd_handle_reset;
 562     s->dev.handle_control = usb_msd_handle_control;
 563     s->dev.handle_data = usb_msd_handle_data;
 564     s->dev.handle_destroy = usb_msd_handle_destroy;
 565
 566     snprintf(s->dev.devname, sizeof(s->dev.devname), "QEMU USB MSD(%.16s)",
 567              filename);
 568
 569     s->scsi_dev = scsi_disk_init(bdrv, 0, usb_msd_command_complete, s);
 570     usb_msd_handle_reset((USBDevice *)s);
 571     return (USBDevice *)s;
 572  fail:
 573     qemu_free(s);
 574     return NULL;
 575 }
 576
 577 BlockDriverState *usb_msd_get_bdrv(USBDevice *dev)
 578 {
 579     MSDState *s = (MSDState *)dev;
 580
 581     return s->bs;
 582 }