qmp-commands.hx

   1 HXCOMM QMP dispatch table and documentation
   2 HXCOMM Text between SQMP and EQMP is copied to the QMP documentation file and
   3 HXCOMM does not show up in the other formats.
   4
   5 SQMP
   6                         QMP Supported Commands
   7                         ----------------------
   8
   9 This document describes all commands currently supported by QMP.
  10
  11 Most of the time their usage is exactly the same as in the user Monitor, this
  12 means that any other document which also describe commands (the manpage,
  13 QEMU's manual, etc) can and should be consulted.
  14
  15 QMP has two types of commands: regular and query commands. Regular commands
  16 usually change the Virtual Machine's state someway, while query commands just
  17 return information. The sections below are divided accordingly.
  18
  19 It's important to observe that all communication examples are formatted in
  20 a reader-friendly way, so that they're easier to understand. However, in real
  21 protocol usage, they're emitted as a single line.
  22
  23 Also, the following notation is used to denote data flow:
  24
  25 -> data issued by the Client
  26 <- Server data response
  27
  28 Please, refer to the QMP specification (QMP/qmp-spec.txt) for detailed
  29 information on the Server command and response formats.
  30
  31 NOTE: This document is temporary and will be replaced soon.
  32
  33 1. Stability Considerations
  34 ===========================
  35
  36 The current QMP command set (described in this file) may be useful for a
  37 number of use cases, however it's limited and several commands have bad
  38 defined semantics, specially with regard to command completion.
  39
  40 These problems are going to be solved incrementally in the next QEMU releases
  41 and we're going to establish a deprecation policy for badly defined commands.
  42
  43 If you're planning to adopt QMP, please observe the following:
  44
  45     1. The deprecation policy will take effect and be documented soon, please
  46        check the documentation of each used command as soon as a new release of
  47        QEMU is available
  48
  49     2. DO NOT rely on anything which is not explicit documented
  50
  51     3. Errors, in special, are not documented. Applications should NOT check
  52        for specific errors classes or data (it's strongly recommended to only
  53        check for the "error" key)
  54
  55 2. Regular Commands
  56 ===================
  57
  58 Server's responses in the examples below are always a success response, please
  59 refer to the QMP specification for more details on error responses.
  60
  61 EQMP
  62
  63     {
  64         .name       = "quit",
  65         .args_type  = "",
  66         .mhandler.cmd_new = qmp_marshal_quit,
  67     },
  68
  69 SQMP
  70 quit
  71 ----
  72
  73 Quit the emulator.
  74
  75 Arguments: None.
  76
  77 Example:
  78
  79 -> { "execute": "quit" }
  80 <- { "return": {} }
  81
  82 EQMP
  83
  84     {
  85         .name       = "eject",
  86         .args_type  = "force:-f,device:B",
  87         .mhandler.cmd_new = qmp_marshal_eject,
  88     },
  89
  90 SQMP
  91 eject
  92 -----
  93
  94 Eject a removable medium.
  95
  96 Arguments:
  97
  98 - force: force ejection (json-bool, optional)
  99 - device: device name (json-string)
 100
 101 Example:
 102
 103 -> { "execute": "eject", "arguments": { "device": "ide1-cd0" } }
 104 <- { "return": {} }
 105
 106 Note: The "force" argument defaults to false.
 107
 108 EQMP
 109
 110     {
 111         .name       = "change",
 112         .args_type  = "device:B,target:F,arg:s?",
 113         .mhandler.cmd_new = qmp_marshal_change,
 114     },
 115
 116 SQMP
 117 change
 118 ------
 119
 120 Change a removable medium or VNC configuration.
 121
 122 Arguments:
 123
 124 - "device": device name (json-string)
 125 - "target": filename or item (json-string)
 126 - "arg": additional argument (json-string, optional)
 127
 128 Examples:
 129
 130 1. Change a removable medium
 131
 132 -> { "execute": "change",
 133              "arguments": { "device": "ide1-cd0",
 134                             "target": "/srv/images/Fedora-12-x86_64-DVD.iso" } }
 135 <- { "return": {} }
 136
 137 2. Change VNC password
 138
 139 -> { "execute": "change",
 140              "arguments": { "device": "vnc", "target": "password",
 141                             "arg": "foobar1" } }
 142 <- { "return": {} }
 143
 144 EQMP
 145
 146     {
 147         .name       = "screendump",
 148         .args_type  = "filename:F",
 149         .mhandler.cmd_new = qmp_marshal_screendump,
 150     },
 151
 152 SQMP
 153 screendump
 154 ----------
 155
 156 Save screen into PPM image.
 157
 158 Arguments:
 159
 160 - "filename": file path (json-string)
 161
 162 Example:
 163
 164 -> { "execute": "screendump", "arguments": { "filename": "/tmp/image" } }
 165 <- { "return": {} }
 166
 167 EQMP
 168
 169     {
 170         .name       = "stop",
 171         .args_type  = "",
 172         .mhandler.cmd_new = qmp_marshal_stop,
 173     },
 174
 175 SQMP
 176 stop
 177 ----
 178
 179 Stop the emulator.
 180
 181 Arguments: None.
 182
 183 Example:
 184
 185 -> { "execute": "stop" }
 186 <- { "return": {} }
 187
 188 EQMP
 189
 190     {
 191         .name       = "cont",
 192         .args_type  = "",
 193         .mhandler.cmd_new = qmp_marshal_cont,
 194     },
 195
 196 SQMP
 197 cont
 198 ----
 199
 200 Resume emulation.
 201
 202 Arguments: None.
 203
 204 Example:
 205
 206 -> { "execute": "cont" }
 207 <- { "return": {} }
 208
 209 EQMP
 210
 211     {
 212         .name       = "system_wakeup",
 213         .args_type  = "",
 214         .mhandler.cmd_new = qmp_marshal_system_wakeup,
 215     },
 216
 217 SQMP
 218 system_wakeup
 219 -------------
 220
 221 Wakeup guest from suspend.
 222
 223 Arguments: None.
 224
 225 Example:
 226
 227 -> { "execute": "system_wakeup" }
 228 <- { "return": {} }
 229
 230 EQMP
 231
 232     {
 233         .name       = "system_reset",
 234         .args_type  = "",
 235         .mhandler.cmd_new = qmp_marshal_system_reset,
 236     },
 237
 238 SQMP
 239 system_reset
 240 ------------
 241
 242 Reset the system.
 243
 244 Arguments: None.
 245
 246 Example:
 247
 248 -> { "execute": "system_reset" }
 249 <- { "return": {} }
 250
 251 EQMP
 252
 253     {
 254         .name       = "system_powerdown",
 255         .args_type  = "",
 256         .mhandler.cmd_new = qmp_marshal_system_powerdown,
 257     },
 258
 259 SQMP
 260 system_powerdown
 261 ----------------
 262
 263 Send system power down event.
 264
 265 Arguments: None.
 266
 267 Example:
 268
 269 -> { "execute": "system_powerdown" }
 270 <- { "return": {} }
 271
 272 EQMP
 273
 274     {
 275         .name       = "device_add",
 276         .args_type  = "device:O",
 277         .params     = "driver[,prop=value][,...]",
 278         .help       = "add device, like -device on the command line",
 279         .mhandler.cmd_new = qmp_device_add,
 280     },
 281
 282 SQMP
 283 device_add
 284 ----------
 285
 286 Add a device.
 287
 288 Arguments:
 289
 290 - "driver": the name of the new device's driver (json-string)
 291 - "bus": the device's parent bus (device tree path, json-string, optional)
 292 - "id": the device's ID, must be unique (json-string)
 293 - device properties
 294
 295 Example:
 296
 297 -> { "execute": "device_add", "arguments": { "driver": "e1000", "id": "net1" } }
 298 <- { "return": {} }
 299
 300 Notes:
 301
 302 (1) For detailed information about this command, please refer to the
 303     'docs/qdev-device-use.txt' file.
 304
 305 (2) It's possible to list device properties by running QEMU with the
 306     "-device DEVICE,\?" command-line argument, where DEVICE is the device's name
 307
 308 EQMP
 309
 310     {
 311         .name       = "device_del",
 312         .args_type  = "id:s",
 313         .mhandler.cmd_new = qmp_marshal_device_del,
 314     },
 315
 316 SQMP
 317 device_del
 318 ----------
 319
 320 Remove a device.
 321
 322 Arguments:
 323
 324 - "id": the device's ID or QOM path (json-string)
 325
 326 Example:
 327
 328 -> { "execute": "device_del", "arguments": { "id": "net1" } }
 329 <- { "return": {} }
 330
 331 Example:
 332
 333 -> { "execute": "device_del", "arguments": { "id": "/machine/peripheral-anon/device[0]" } }
 334 <- { "return": {} }
 335
 336 EQMP
 337
 338     {
 339         .name       = "send-key",
 340         .args_type  = "keys:q,hold-time:i?",
 341         .mhandler.cmd_new = qmp_marshal_send_key,
 342     },
 343
 344 SQMP
 345 send-key
 346 ----------
 347
 348 Send keys to VM.
 349
 350 Arguments:
 351
 352 keys array:
 353     - "key": key sequence (a json-array of key union values,
 354              union can be number or qcode enum)
 355
 356 - hold-time: time to delay key up events, milliseconds. Defaults to 100
 357              (json-int, optional)
 358
 359 Example:
 360
 361 -> { "execute": "send-key",
 362      "arguments": { "keys": [ { "type": "qcode", "data": "ctrl" },
 363                               { "type": "qcode", "data": "alt" },
 364                               { "type": "qcode", "data": "delete" } ] } }
 365 <- { "return": {} }
 366
 367 EQMP
 368
 369     {
 370         .name       = "cpu",
 371         .args_type  = "index:i",
 372         .mhandler.cmd_new = qmp_marshal_cpu,
 373     },
 374
 375 SQMP
 376 cpu
 377 ---
 378
 379 Set the default CPU.
 380
 381 Arguments:
 382
 383 - "index": the CPU's index (json-int)
 384
 385 Example:
 386
 387 -> { "execute": "cpu", "arguments": { "index": 0 } }
 388 <- { "return": {} }
 389
 390 Note: CPUs' indexes are obtained with the 'query-cpus' command.
 391
 392 EQMP
 393
 394     {
 395         .name       = "cpu-add",
 396         .args_type  = "id:i",
 397         .mhandler.cmd_new = qmp_marshal_cpu_add,
 398     },
 399
 400 SQMP
 401 cpu-add
 402 -------
 403
 404 Adds virtual cpu
 405
 406 Arguments:
 407
 408 - "id": cpu id (json-int)
 409
 410 Example:
 411
 412 -> { "execute": "cpu-add", "arguments": { "id": 2 } }
 413 <- { "return": {} }
 414
 415 EQMP
 416
 417     {
 418         .name       = "memsave",
 419         .args_type  = "val:l,size:i,filename:s,cpu:i?",
 420         .mhandler.cmd_new = qmp_marshal_memsave,
 421     },
 422
 423 SQMP
 424 memsave
 425 -------
 426
 427 Save to disk virtual memory dump starting at 'val' of size 'size'.
 428
 429 Arguments:
 430
 431 - "val": the starting address (json-int)
 432 - "size": the memory size, in bytes (json-int)
 433 - "filename": file path (json-string)
 434 - "cpu": virtual CPU index (json-int, optional)
 435
 436 Example:
 437
 438 -> { "execute": "memsave",
 439              "arguments": { "val": 10,
 440                             "size": 100,
 441                             "filename": "/tmp/virtual-mem-dump" } }
 442 <- { "return": {} }
 443
 444 EQMP
 445
 446     {
 447         .name       = "pmemsave",
 448         .args_type  = "val:l,size:i,filename:s",
 449         .mhandler.cmd_new = qmp_marshal_pmemsave,
 450     },
 451
 452 SQMP
 453 pmemsave
 454 --------
 455
 456 Save to disk physical memory dump starting at 'val' of size 'size'.
 457
 458 Arguments:
 459
 460 - "val": the starting address (json-int)
 461 - "size": the memory size, in bytes (json-int)
 462 - "filename": file path (json-string)
 463
 464 Example:
 465
 466 -> { "execute": "pmemsave",
 467              "arguments": { "val": 10,
 468                             "size": 100,
 469                             "filename": "/tmp/physical-mem-dump" } }
 470 <- { "return": {} }
 471
 472 EQMP
 473
 474     {
 475         .name       = "inject-nmi",
 476         .args_type  = "",
 477         .mhandler.cmd_new = qmp_marshal_inject_nmi,
 478     },
 479
 480 SQMP
 481 inject-nmi
 482 ----------
 483
 484 Inject an NMI on the default CPU (x86/s390) or all CPUs (ppc64).
 485
 486 Arguments: None.
 487
 488 Example:
 489
 490 -> { "execute": "inject-nmi" }
 491 <- { "return": {} }
 492
 493 Note: inject-nmi fails when the guest doesn't support injecting.
 494
 495 EQMP
 496
 497     {
 498         .name       = "ringbuf-write",
 499         .args_type  = "device:s,data:s,format:s?",
 500         .mhandler.cmd_new = qmp_marshal_ringbuf_write,
 501     },
 502
 503 SQMP
 504 ringbuf-write
 505 -------------
 506
 507 Write to a ring buffer character device.
 508
 509 Arguments:
 510
 511 - "device": ring buffer character device name (json-string)
 512 - "data": data to write (json-string)
 513 - "format": data format (json-string, optional)
 514           - Possible values: "utf8" (default), "base64"
 515
 516 Example:
 517
 518 -> { "execute": "ringbuf-write",
 519                 "arguments": { "device": "foo",
 520                                "data": "abcdefgh",
 521                                "format": "utf8" } }
 522 <- { "return": {} }
 523
 524 EQMP
 525
 526     {
 527         .name       = "ringbuf-read",
 528         .args_type  = "device:s,size:i,format:s?",
 529         .mhandler.cmd_new = qmp_marshal_ringbuf_read,
 530     },
 531
 532 SQMP
 533 ringbuf-read
 534 -------------
 535
 536 Read from a ring buffer character device.
 537
 538 Arguments:
 539
 540 - "device": ring buffer character device name (json-string)
 541 - "size": how many bytes to read at most (json-int)
 542           - Number of data bytes, not number of characters in encoded data
 543 - "format": data format (json-string, optional)
 544           - Possible values: "utf8" (default), "base64"
 545           - Naturally, format "utf8" works only when the ring buffer
 546             contains valid UTF-8 text.  Invalid UTF-8 sequences get
 547             replaced.  Bug: replacement doesn't work.  Bug: can screw
 548             up on encountering NUL characters, after the ring buffer
 549             lost data, and when reading stops because the size limit
 550             is reached.
 551
 552 Example:
 553
 554 -> { "execute": "ringbuf-read",
 555                 "arguments": { "device": "foo",
 556                                "size": 1000,
 557                                "format": "utf8" } }
 558 <- {"return": "abcdefgh"}
 559
 560 EQMP
 561
 562     {
 563         .name       = "xen-save-devices-state",
 564         .args_type  = "filename:F",
 565     .mhandler.cmd_new = qmp_marshal_xen_save_devices_state,
 566     },
 567
 568 SQMP
 569 xen-save-devices-state
 570 -------
 571
 572 Save the state of all devices to file. The RAM and the block devices
 573 of the VM are not saved by this command.
 574
 575 Arguments:
 576
 577 - "filename": the file to save the state of the devices to as binary
 578 data. See xen-save-devices-state.txt for a description of the binary
 579 format.
 580
 581 Example:
 582
 583 -> { "execute": "xen-save-devices-state",
 584      "arguments": { "filename": "/tmp/save" } }
 585 <- { "return": {} }
 586
 587 EQMP
 588
 589     {
 590         .name       = "xen-load-devices-state",
 591         .args_type  = "filename:F",
 592         .mhandler.cmd_new = qmp_marshal_xen_load_devices_state,
 593     },
 594
 595 SQMP
 596 xen-load-devices-state
 597 ----------------------
 598
 599 Load the state of all devices from file. The RAM and the block devices
 600 of the VM are not loaded by this command.
 601
 602 Arguments:
 603
 604 - "filename": the file to load the state of the devices from as binary
 605 data. See xen-save-devices-state.txt for a description of the binary
 606 format.
 607
 608 Example:
 609
 610 -> { "execute": "xen-load-devices-state",
 611      "arguments": { "filename": "/tmp/resume" } }
 612 <- { "return": {} }
 613
 614 EQMP
 615
 616     {
 617         .name       = "xen-set-global-dirty-log",
 618         .args_type  = "enable:b",
 619         .mhandler.cmd_new = qmp_marshal_xen_set_global_dirty_log,
 620     },
 621
 622 SQMP
 623 xen-set-global-dirty-log
 624 -------
 625
 626 Enable or disable the global dirty log mode.
 627
 628 Arguments:
 629
 630 - "enable": Enable it or disable it.
 631
 632 Example:
 633
 634 -> { "execute": "xen-set-global-dirty-log",
 635      "arguments": { "enable": true } }
 636 <- { "return": {} }
 637
 638 EQMP
 639
 640     {
 641         .name       = "migrate",
 642         .args_type  = "detach:-d,blk:-b,inc:-i,uri:s",
 643         .mhandler.cmd_new = qmp_marshal_migrate,
 644     },
 645
 646 SQMP
 647 migrate
 648 -------
 649
 650 Migrate to URI.
 651
 652 Arguments:
 653
 654 - "blk": block migration, full disk copy (json-bool, optional)
 655 - "inc": incremental disk copy (json-bool, optional)
 656 - "uri": Destination URI (json-string)
 657
 658 Example:
 659
 660 -> { "execute": "migrate", "arguments": { "uri": "tcp:0:4446" } }
 661 <- { "return": {} }
 662
 663 Notes:
 664
 665 (1) The 'query-migrate' command should be used to check migration's progress
 666     and final result (this information is provided by the 'status' member)
 667 (2) All boolean arguments default to false
 668 (3) The user Monitor's "detach" argument is invalid in QMP and should not
 669     be used
 670
 671 EQMP
 672
 673     {
 674         .name       = "migrate_cancel",
 675         .args_type  = "",
 676         .mhandler.cmd_new = qmp_marshal_migrate_cancel,
 677     },
 678
 679 SQMP
 680 migrate_cancel
 681 --------------
 682
 683 Cancel the current migration.
 684
 685 Arguments: None.
 686
 687 Example:
 688
 689 -> { "execute": "migrate_cancel" }
 690 <- { "return": {} }
 691
 692 EQMP
 693
 694     {
 695         .name       = "migrate-incoming",
 696         .args_type  = "uri:s",
 697         .mhandler.cmd_new = qmp_marshal_migrate_incoming,
 698     },
 699
 700 SQMP
 701 migrate-incoming
 702 ----------------
 703
 704 Continue an incoming migration
 705
 706 Arguments:
 707
 708 - "uri": Source/listening URI (json-string)
 709
 710 Example:
 711
 712 -> { "execute": "migrate-incoming", "arguments": { "uri": "tcp::4446" } }
 713 <- { "return": {} }
 714
 715 Notes:
 716
 717 (1) QEMU must be started with -incoming defer to allow migrate-incoming to
 718     be used
 719 (2) The uri format is the same as for -incoming
 720
 721 EQMP
 722     {
 723         .name       = "migrate-set-cache-size",
 724         .args_type  = "value:o",
 725         .mhandler.cmd_new = qmp_marshal_migrate_set_cache_size,
 726     },
 727
 728 SQMP
 729 migrate-set-cache-size
 730 ----------------------
 731
 732 Set cache size to be used by XBZRLE migration, the cache size will be rounded
 733 down to the nearest power of 2
 734
 735 Arguments:
 736
 737 - "value": cache size in bytes (json-int)
 738
 739 Example:
 740
 741 -> { "execute": "migrate-set-cache-size", "arguments": { "value": 536870912 } }
 742 <- { "return": {} }
 743
 744 EQMP
 745     {
 746         .name       = "migrate-start-postcopy",
 747         .args_type  = "",
 748         .mhandler.cmd_new = qmp_marshal_migrate_start_postcopy,
 749     },
 750
 751 SQMP
 752 migrate-start-postcopy
 753 ----------------------
 754
 755 Switch an in-progress migration to postcopy mode. Ignored after the end of
 756 migration (or once already in postcopy).
 757
 758 Example:
 759 -> { "execute": "migrate-start-postcopy" }
 760 <- { "return": {} }
 761
 762 EQMP
 763
 764     {
 765         .name       = "query-migrate-cache-size",
 766         .args_type  = "",
 767         .mhandler.cmd_new = qmp_marshal_query_migrate_cache_size,
 768     },
 769
 770 SQMP
 771 query-migrate-cache-size
 772 ------------------------
 773
 774 Show cache size to be used by XBZRLE migration
 775
 776 returns a json-object with the following information:
 777 - "size" : json-int
 778
 779 Example:
 780
 781 -> { "execute": "query-migrate-cache-size" }
 782 <- { "return": 67108864 }
 783
 784 EQMP
 785
 786     {
 787         .name       = "migrate_set_speed",
 788         .args_type  = "value:o",
 789         .mhandler.cmd_new = qmp_marshal_migrate_set_speed,
 790     },
 791
 792 SQMP
 793 migrate_set_speed
 794 -----------------
 795
 796 Set maximum speed for migrations.
 797
 798 Arguments:
 799
 800 - "value": maximum speed, in bytes per second (json-int)
 801
 802 Example:
 803
 804 -> { "execute": "migrate_set_speed", "arguments": { "value": 1024 } }
 805 <- { "return": {} }
 806
 807 EQMP
 808
 809     {
 810         .name       = "migrate_set_downtime",
 811         .args_type  = "value:T",
 812         .mhandler.cmd_new = qmp_marshal_migrate_set_downtime,
 813     },
 814
 815 SQMP
 816 migrate_set_downtime
 817 --------------------
 818
 819 Set maximum tolerated downtime (in seconds) for migrations.
 820
 821 Arguments:
 822
 823 - "value": maximum downtime (json-number)
 824
 825 Example:
 826
 827 -> { "execute": "migrate_set_downtime", "arguments": { "value": 0.1 } }
 828 <- { "return": {} }
 829
 830 EQMP
 831
 832     {
 833         .name       = "client_migrate_info",
 834         .args_type  = "protocol:s,hostname:s,port:i?,tls-port:i?,cert-subject:s?",
 835         .params     = "protocol hostname port tls-port cert-subject",
 836         .help       = "set migration information for remote display",
 837         .mhandler.cmd_new = qmp_marshal_client_migrate_info,
 838     },
 839
 840 SQMP
 841 client_migrate_info
 842 -------------------
 843
 844 Set migration information for remote display.  This makes the server
 845 ask the client to automatically reconnect using the new parameters
 846 once migration finished successfully.  Only implemented for SPICE.
 847
 848 Arguments:
 849
 850 - "protocol":     must be "spice" (json-string)
 851 - "hostname":     migration target hostname (json-string)
 852 - "port":         spice tcp port for plaintext channels (json-int, optional)
 853 - "tls-port":     spice tcp port for tls-secured channels (json-int, optional)
 854 - "cert-subject": server certificate subject (json-string, optional)
 855
 856 Example:
 857
 858 -> { "execute": "client_migrate_info",
 859      "arguments": { "protocol": "spice",
 860                     "hostname": "virt42.lab.kraxel.org",
 861                     "port": 1234 } }
 862 <- { "return": {} }
 863
 864 EQMP
 865
 866     {
 867         .name       = "dump-guest-memory",
 868         .args_type  = "paging:b,protocol:s,detach:b?,begin:i?,end:i?,format:s?",
 869         .params     = "-p protocol [-d] [begin] [length] [format]",
 870         .help       = "dump guest memory to file",
 871         .mhandler.cmd_new = qmp_marshal_dump_guest_memory,
 872     },
 873
 874 SQMP
 875 dump
 876
 877
 878 Dump guest memory to file. The file can be processed with crash or gdb.
 879
 880 Arguments:
 881
 882 - "paging": do paging to get guest's memory mapping (json-bool)
 883 - "protocol": destination file(started with "file:") or destination file
 884               descriptor (started with "fd:") (json-string)
 885 - "detach": if specified, command will return immediately, without waiting
 886             for the dump to finish. The user can track progress using
 887             "query-dump". (json-bool)
 888 - "begin": the starting physical address. It's optional, and should be specified
 889            with length together (json-int)
 890 - "length": the memory size, in bytes. It's optional, and should be specified
 891             with begin together (json-int)
 892 - "format": the format of guest memory dump. It's optional, and can be
 893             elf|kdump-zlib|kdump-lzo|kdump-snappy, but non-elf formats will
 894             conflict with paging and filter, ie. begin and length (json-string)
 895
 896 Example:
 897
 898 -> { "execute": "dump-guest-memory", "arguments": { "protocol": "fd:dump" } }
 899 <- { "return": {} }
 900
 901 Notes:
 902
 903 (1) All boolean arguments default to false
 904
 905 EQMP
 906
 907     {
 908         .name       = "query-dump-guest-memory-capability",
 909         .args_type  = "",
 910     .mhandler.cmd_new = qmp_marshal_query_dump_guest_memory_capability,
 911     },
 912
 913 SQMP
 914 query-dump-guest-memory-capability
 915 ----------
 916
 917 Show available formats for 'dump-guest-memory'
 918
 919 Example:
 920
 921 -> { "execute": "query-dump-guest-memory-capability" }
 922 <- { "return": { "formats":
 923                     ["elf", "kdump-zlib", "kdump-lzo", "kdump-snappy"] }
 924
 925 EQMP
 926
 927     {
 928         .name       = "query-dump",
 929         .args_type  = "",
 930         .params     = "",
 931         .help       = "query background dump status",
 932         .mhandler.cmd_new = qmp_marshal_query_dump,
 933     },
 934
 935 SQMP
 936 query-dump
 937 ----------
 938
 939 Query background dump status.
 940
 941 Arguments: None.
 942
 943 Example:
 944
 945 -> { "execute": "query-dump" }
 946 <- { "return": { "status": "active", "completed": 1024000,
 947                  "total": 2048000 } }
 948
 949 EQMP
 950
 951 #if defined TARGET_S390X
 952     {
 953         .name       = "dump-skeys",
 954         .args_type  = "filename:F",
 955         .mhandler.cmd_new = qmp_marshal_dump_skeys,
 956     },
 957 #endif
 958
 959 SQMP
 960 dump-skeys
 961 ----------
 962
 963 Save guest storage keys to file.
 964
 965 Arguments:
 966
 967 - "filename": file path (json-string)
 968
 969 Example:
 970
 971 -> { "execute": "dump-skeys", "arguments": { "filename": "/tmp/skeys" } }
 972 <- { "return": {} }
 973
 974 EQMP
 975
 976     {
 977         .name       = "netdev_add",
 978         .args_type  = "netdev:O",
 979         .mhandler.cmd_new = qmp_netdev_add,
 980     },
 981
 982 SQMP
 983 netdev_add
 984 ----------
 985
 986 Add host network device.
 987
 988 Arguments:
 989
 990 - "type": the device type, "tap", "user", ... (json-string)
 991 - "id": the device's ID, must be unique (json-string)
 992 - device options
 993
 994 Example:
 995
 996 -> { "execute": "netdev_add",
 997      "arguments": { "type": "user", "id": "netdev1",
 998                     "dnssearch": "example.org" } }
 999 <- { "return": {} }
1000
1001 Note: The supported device options are the same ones supported by the '-netdev'
1002       command-line argument, which are listed in the '-help' output or QEMU's
1003       manual
1004
1005 EQMP
1006
1007     {
1008         .name       = "netdev_del",
1009         .args_type  = "id:s",
1010         .mhandler.cmd_new = qmp_marshal_netdev_del,
1011     },
1012
1013 SQMP
1014 netdev_del
1015 ----------
1016
1017 Remove host network device.
1018
1019 Arguments:
1020
1021 - "id": the device's ID, must be unique (json-string)
1022
1023 Example:
1024
1025 -> { "execute": "netdev_del", "arguments": { "id": "netdev1" } }
1026 <- { "return": {} }
1027
1028
1029 EQMP
1030
1031     {
1032         .name       = "object-add",
1033         .args_type  = "qom-type:s,id:s,props:q?",
1034         .mhandler.cmd_new = qmp_marshal_object_add,
1035     },
1036
1037 SQMP
1038 object-add
1039 ----------
1040
1041 Create QOM object.
1042
1043 Arguments:
1044
1045 - "qom-type": the object's QOM type, i.e. the class name (json-string)
1046 - "id": the object's ID, must be unique (json-string)
1047 - "props": a dictionary of object property values (optional, json-dict)
1048
1049 Example:
1050
1051 -> { "execute": "object-add", "arguments": { "qom-type": "rng-random", "id": "rng1",
1052      "props": { "filename": "/dev/hwrng" } } }
1053 <- { "return": {} }
1054
1055 EQMP
1056
1057     {
1058         .name       = "object-del",
1059         .args_type  = "id:s",
1060         .mhandler.cmd_new = qmp_marshal_object_del,
1061     },
1062
1063 SQMP
1064 object-del
1065 ----------
1066
1067 Remove QOM object.
1068
1069 Arguments:
1070
1071 - "id": the object's ID (json-string)
1072
1073 Example:
1074
1075 -> { "execute": "object-del", "arguments": { "id": "rng1" } }
1076 <- { "return": {} }
1077
1078
1079 EQMP
1080
1081
1082     {
1083         .name       = "block_resize",
1084         .args_type  = "device:s?,node-name:s?,size:o",
1085         .mhandler.cmd_new = qmp_marshal_block_resize,
1086     },
1087
1088 SQMP
1089 block_resize
1090 ------------
1091
1092 Resize a block image while a guest is running.
1093
1094 Arguments:
1095
1096 - "device": the device's ID, must be unique (json-string)
1097 - "node-name": the node name in the block driver state graph (json-string)
1098 - "size": new size
1099
1100 Example:
1101
1102 -> { "execute": "block_resize", "arguments": { "device": "scratch", "size": 1073741824 } }
1103 <- { "return": {} }
1104
1105 EQMP
1106
1107     {
1108         .name       = "block-stream",
1109         .args_type  = "device:B,base:s?,speed:o?,backing-file:s?,on-error:s?",
1110         .mhandler.cmd_new = qmp_marshal_block_stream,
1111     },
1112
1113 SQMP
1114 block-stream
1115 ------------
1116
1117 Copy data from a backing file into a block device.
1118
1119 Arguments:
1120
1121 - "device": The device's ID, must be unique (json-string)
1122 - "base": The file name of the backing image above which copying starts
1123           (json-string, optional)
1124 - "backing-file": The backing file string to write into the active layer. This
1125                   filename is not validated.
1126
1127                   If a pathname string is such that it cannot be resolved by
1128                   QEMU, that means that subsequent QMP or HMP commands must use
1129                   node-names for the image in question, as filename lookup
1130                   methods will fail.
1131
1132                   If not specified, QEMU will automatically determine the
1133                   backing file string to use, or error out if there is no
1134                   obvious choice.  Care should be taken when specifying the
1135                   string, to specify a valid filename or protocol.
1136                   (json-string, optional) (Since 2.1)
1137 - "speed":  the maximum speed, in bytes per second (json-int, optional)
1138 - "on-error": the action to take on an error (default 'report').  'stop' and
1139               'enospc' can only be used if the block device supports io-status.
1140               (json-string, optional) (Since 2.1)
1141
1142 Example:
1143
1144 -> { "execute": "block-stream", "arguments": { "device": "virtio0",
1145                                                "base": "/tmp/master.qcow2" } }
1146 <- { "return": {} }
1147
1148 EQMP
1149
1150     {
1151         .name       = "block-commit",
1152         .args_type  = "device:B,base:s?,top:s?,backing-file:s?,speed:o?",
1153         .mhandler.cmd_new = qmp_marshal_block_commit,
1154     },
1155
1156 SQMP
1157 block-commit
1158 ------------
1159
1160 Live commit of data from overlay image nodes into backing nodes - i.e., writes
1161 data between 'top' and 'base' into 'base'.
1162
1163 Arguments:
1164
1165 - "device": The device's ID, must be unique (json-string)
1166 - "base": The file name of the backing image to write data into.
1167           If not specified, this is the deepest backing image
1168           (json-string, optional)
1169 - "top":  The file name of the backing image within the image chain,
1170           which contains the topmost data to be committed down. If
1171           not specified, this is the active layer. (json-string, optional)
1172
1173 - backing-file:     The backing file string to write into the overlay
1174                     image of 'top'.  If 'top' is the active layer,
1175                     specifying a backing file string is an error. This
1176                     filename is not validated.
1177
1178                     If a pathname string is such that it cannot be
1179                     resolved by QEMU, that means that subsequent QMP or
1180                     HMP commands must use node-names for the image in
1181                     question, as filename lookup methods will fail.
1182
1183                     If not specified, QEMU will automatically determine
1184                     the backing file string to use, or error out if
1185                     there is no obvious choice. Care should be taken
1186                     when specifying the string, to specify a valid
1187                     filename or protocol.
1188                     (json-string, optional) (Since 2.1)
1189
1190           If top == base, that is an error.
1191           If top == active, the job will not be completed by itself,
1192           user needs to complete the job with the block-job-complete
1193           command after getting the ready event. (Since 2.0)
1194
1195           If the base image is smaller than top, then the base image
1196           will be resized to be the same size as top.  If top is
1197           smaller than the base image, the base will not be
1198           truncated.  If you want the base image size to match the
1199           size of the smaller top, you can safely truncate it
1200           yourself once the commit operation successfully completes.
1201           (json-string)
1202 - "speed":  the maximum speed, in bytes per second (json-int, optional)
1203
1204
1205 Example:
1206
1207 -> { "execute": "block-commit", "arguments": { "device": "virtio0",
1208                                               "top": "/tmp/snap1.qcow2" } }
1209 <- { "return": {} }
1210
1211 EQMP
1212
1213     {
1214         .name       = "drive-backup",
1215         .args_type  = "sync:s,device:B,target:s,speed:i?,mode:s?,format:s?,"
1216                       "bitmap:s?,on-source-error:s?,on-target-error:s?",
1217         .mhandler.cmd_new = qmp_marshal_drive_backup,
1218     },
1219
1220 SQMP
1221 drive-backup
1222 ------------
1223
1224 Start a point-in-time copy of a block device to a new destination.  The
1225 status of ongoing drive-backup operations can be checked with
1226 query-block-jobs where the BlockJobInfo.type field has the value 'backup'.
1227 The operation can be stopped before it has completed using the
1228 block-job-cancel command.
1229
1230 Arguments:
1231
1232 - "device": the name of the device which should be copied.
1233             (json-string)
1234 - "target": the target of the new image. If the file exists, or if it is a
1235             device, the existing file/device will be used as the new
1236             destination.  If it does not exist, a new file will be created.
1237             (json-string)
1238 - "format": the format of the new destination, default is to probe if 'mode' is
1239             'existing', else the format of the source
1240             (json-string, optional)
1241 - "sync": what parts of the disk image should be copied to the destination;
1242   possibilities include "full" for all the disk, "top" for only the sectors
1243   allocated in the topmost image, "incremental" for only the dirty sectors in
1244   the bitmap, or "none" to only replicate new I/O (MirrorSyncMode).
1245 - "bitmap": dirty bitmap name for sync==incremental. Must be present if sync
1246             is "incremental", must NOT be present otherwise.
1247 - "mode": whether and how QEMU should create a new image
1248           (NewImageMode, optional, default 'absolute-paths')
1249 - "speed": the maximum speed, in bytes per second (json-int, optional)
1250 - "on-source-error": the action to take on an error on the source, default
1251                      'report'.  'stop' and 'enospc' can only be used
1252                      if the block device supports io-status.
1253                      (BlockdevOnError, optional)
1254 - "on-target-error": the action to take on an error on the target, default
1255                      'report' (no limitations, since this applies to
1256                      a different block device than device).
1257                      (BlockdevOnError, optional)
1258
1259 Example:
1260 -> { "execute": "drive-backup", "arguments": { "device": "drive0",
1261                                                "sync": "full",
1262                                                "target": "backup.img" } }
1263 <- { "return": {} }
1264
1265 EQMP
1266
1267     {
1268         .name       = "blockdev-backup",
1269         .args_type  = "sync:s,device:B,target:B,speed:i?,"
1270                       "on-source-error:s?,on-target-error:s?",
1271         .mhandler.cmd_new = qmp_marshal_blockdev_backup,
1272     },
1273
1274 SQMP
1275 blockdev-backup
1276 ---------------
1277
1278 The device version of drive-backup: this command takes an existing named device
1279 as backup target.
1280
1281 Arguments:
1282
1283 - "device": the name of the device which should be copied.
1284             (json-string)
1285 - "target": the name of the backup target device. (json-string)
1286 - "sync": what parts of the disk image should be copied to the destination;
1287           possibilities include "full" for all the disk, "top" for only the
1288           sectors allocated in the topmost image, or "none" to only replicate
1289           new I/O (MirrorSyncMode).
1290 - "speed": the maximum speed, in bytes per second (json-int, optional)
1291 - "on-source-error": the action to take on an error on the source, default
1292                      'report'.  'stop' and 'enospc' can only be used
1293                      if the block device supports io-status.
1294                      (BlockdevOnError, optional)
1295 - "on-target-error": the action to take on an error on the target, default
1296                      'report' (no limitations, since this applies to
1297                      a different block device than device).
1298                      (BlockdevOnError, optional)
1299
1300 Example:
1301 -> { "execute": "blockdev-backup", "arguments": { "device": "src-id",
1302                                                   "sync": "full",
1303                                                   "target": "tgt-id" } }
1304 <- { "return": {} }
1305
1306 EQMP
1307
1308     {
1309         .name       = "block-job-set-speed",
1310         .args_type  = "device:B,speed:o",
1311         .mhandler.cmd_new = qmp_marshal_block_job_set_speed,
1312     },
1313
1314     {
1315         .name       = "block-job-cancel",
1316         .args_type  = "device:B,force:b?",
1317         .mhandler.cmd_new = qmp_marshal_block_job_cancel,
1318     },
1319     {
1320         .name       = "block-job-pause",
1321         .args_type  = "device:B",
1322         .mhandler.cmd_new = qmp_marshal_block_job_pause,
1323     },
1324     {
1325         .name       = "block-job-resume",
1326         .args_type  = "device:B",
1327         .mhandler.cmd_new = qmp_marshal_block_job_resume,
1328     },
1329     {
1330         .name       = "block-job-complete",
1331         .args_type  = "device:B",
1332         .mhandler.cmd_new = qmp_marshal_block_job_complete,
1333     },
1334     {
1335         .name       = "transaction",
1336         .args_type  = "actions:q,properties:q?",
1337         .mhandler.cmd_new = qmp_marshal_transaction,
1338     },
1339
1340 SQMP
1341 transaction
1342 -----------
1343
1344 Atomically operate on one or more block devices.  Operations that are
1345 currently supported:
1346
1347     - drive-backup
1348     - blockdev-backup
1349     - blockdev-snapshot-sync
1350     - blockdev-snapshot-internal-sync
1351     - abort
1352     - block-dirty-bitmap-add
1353     - block-dirty-bitmap-clear
1354
1355 Refer to the qemu/qapi-schema.json file for minimum required QEMU
1356 versions for these operations.  A list of dictionaries is accepted,
1357 that contains the actions to be performed.  If there is any failure
1358 performing any of the operations, all operations for the group are
1359 abandoned.
1360
1361 For external snapshots, the dictionary contains the device, the file to use for
1362 the new snapshot, and the format.  The default format, if not specified, is
1363 qcow2.
1364
1365 Each new snapshot defaults to being created by QEMU (wiping any
1366 contents if the file already exists), but it is also possible to reuse
1367 an externally-created file.  In the latter case, you should ensure that
1368 the new image file has the same contents as the current one; QEMU cannot
1369 perform any meaningful check.  Typically this is achieved by using the
1370 current image file as the backing file for the new image.
1371
1372 On failure, the original disks pre-snapshot attempt will be used.
1373
1374 For internal snapshots, the dictionary contains the device and the snapshot's
1375 name.  If an internal snapshot matching name already exists, the request will
1376 be rejected.  Only some image formats support it, for example, qcow2, rbd,
1377 and sheepdog.
1378
1379 On failure, qemu will try delete the newly created internal snapshot in the
1380 transaction.  When an I/O error occurs during deletion, the user needs to fix
1381 it later with qemu-img or other command.
1382
1383 Arguments:
1384
1385 actions array:
1386     - "type": the operation to perform (json-string).  Possible
1387               values: "drive-backup", "blockdev-backup",
1388                       "blockdev-snapshot-sync",
1389                       "blockdev-snapshot-internal-sync",
1390                       "abort", "block-dirty-bitmap-add",
1391                       "block-dirty-bitmap-clear"
1392     - "data": a dictionary.  The contents depend on the value
1393       of "type".  When "type" is "blockdev-snapshot-sync":
1394       - "device": device name to snapshot (json-string)
1395       - "node-name": graph node name to snapshot (json-string)
1396       - "snapshot-file": name of new image file (json-string)
1397       - "snapshot-node-name": graph node name of the new snapshot (json-string)
1398       - "format": format of new image (json-string, optional)
1399       - "mode": whether and how QEMU should create the snapshot file
1400         (NewImageMode, optional, default "absolute-paths")
1401       When "type" is "blockdev-snapshot-internal-sync":
1402       - "device": device name to snapshot (json-string)
1403       - "name": name of the new snapshot (json-string)
1404
1405 Example:
1406
1407 -> { "execute": "transaction",
1408      "arguments": { "actions": [
1409          { "type": "blockdev-snapshot-sync", "data" : { "device": "ide-hd0",
1410                                          "snapshot-file": "/some/place/my-image",
1411                                          "format": "qcow2" } },
1412          { "type": "blockdev-snapshot-sync", "data" : { "node-name": "myfile",
1413                                          "snapshot-file": "/some/place/my-image2",
1414                                          "snapshot-node-name": "node3432",
1415                                          "mode": "existing",
1416                                          "format": "qcow2" } },
1417          { "type": "blockdev-snapshot-sync", "data" : { "device": "ide-hd1",
1418                                          "snapshot-file": "/some/place/my-image2",
1419                                          "mode": "existing",
1420                                          "format": "qcow2" } },
1421          { "type": "blockdev-snapshot-internal-sync", "data" : {
1422                                          "device": "ide-hd2",
1423                                          "name": "snapshot0" } } ] } }
1424 <- { "return": {} }
1425
1426 EQMP
1427
1428     {
1429         .name       = "block-dirty-bitmap-add",
1430         .args_type  = "node:B,name:s,granularity:i?",
1431         .mhandler.cmd_new = qmp_marshal_block_dirty_bitmap_add,
1432     },
1433
1434 SQMP
1435
1436 block-dirty-bitmap-add
1437 ----------------------
1438 Since 2.4
1439
1440 Create a dirty bitmap with a name on the device, and start tracking the writes.
1441
1442 Arguments:
1443
1444 - "node": device/node on which to create dirty bitmap (json-string)
1445 - "name": name of the new dirty bitmap (json-string)
1446 - "granularity": granularity to track writes with (int, optional)
1447
1448 Example:
1449
1450 -> { "execute": "block-dirty-bitmap-add", "arguments": { "node": "drive0",
1451                                                    "name": "bitmap0" } }
1452 <- { "return": {} }
1453
1454 EQMP
1455
1456     {
1457         .name       = "block-dirty-bitmap-remove",
1458         .args_type  = "node:B,name:s",
1459         .mhandler.cmd_new = qmp_marshal_block_dirty_bitmap_remove,
1460     },
1461
1462 SQMP
1463
1464 block-dirty-bitmap-remove
1465 -------------------------
1466 Since 2.4
1467
1468 Stop write tracking and remove the dirty bitmap that was created with
1469 block-dirty-bitmap-add.
1470
1471 Arguments:
1472
1473 - "node": device/node on which to remove dirty bitmap (json-string)
1474 - "name": name of the dirty bitmap to remove (json-string)
1475
1476 Example:
1477
1478 -> { "execute": "block-dirty-bitmap-remove", "arguments": { "node": "drive0",
1479                                                       "name": "bitmap0" } }
1480 <- { "return": {} }
1481
1482 EQMP
1483
1484     {
1485         .name       = "block-dirty-bitmap-clear",
1486         .args_type  = "node:B,name:s",
1487         .mhandler.cmd_new = qmp_marshal_block_dirty_bitmap_clear,
1488     },
1489
1490 SQMP
1491
1492 block-dirty-bitmap-clear
1493 ------------------------
1494 Since 2.4
1495
1496 Reset the dirty bitmap associated with a node so that an incremental backup
1497 from this point in time forward will only backup clusters modified after this
1498 clear operation.
1499
1500 Arguments:
1501
1502 - "node": device/node on which to remove dirty bitmap (json-string)
1503 - "name": name of the dirty bitmap to remove (json-string)
1504
1505 Example:
1506
1507 -> { "execute": "block-dirty-bitmap-clear", "arguments": { "node": "drive0",
1508                                                            "name": "bitmap0" } }
1509 <- { "return": {} }
1510
1511 EQMP
1512
1513     {
1514         .name       = "blockdev-snapshot-sync",
1515         .args_type  = "device:s?,node-name:s?,snapshot-file:s,snapshot-node-name:s?,format:s?,mode:s?",
1516         .mhandler.cmd_new = qmp_marshal_blockdev_snapshot_sync,
1517     },
1518
1519 SQMP
1520 blockdev-snapshot-sync
1521 ----------------------
1522
1523 Synchronous snapshot of a block device. snapshot-file specifies the
1524 target of the new image. If the file exists, or if it is a device, the
1525 snapshot will be created in the existing file/device. If does not
1526 exist, a new file will be created. format specifies the format of the
1527 snapshot image, default is qcow2.
1528
1529 Arguments:
1530
1531 - "device": device name to snapshot (json-string)
1532 - "node-name": graph node name to snapshot (json-string)
1533 - "snapshot-file": name of new image file (json-string)
1534 - "snapshot-node-name": graph node name of the new snapshot (json-string)
1535 - "mode": whether and how QEMU should create the snapshot file
1536   (NewImageMode, optional, default "absolute-paths")
1537 - "format": format of new image (json-string, optional)
1538
1539 Example:
1540
1541 -> { "execute": "blockdev-snapshot-sync", "arguments": { "device": "ide-hd0",
1542                                                          "snapshot-file":
1543                                                         "/some/place/my-image",
1544                                                         "format": "qcow2" } }
1545 <- { "return": {} }
1546
1547 EQMP
1548
1549     {
1550         .name       = "blockdev-snapshot",
1551         .args_type  = "node:s,overlay:s",
1552         .mhandler.cmd_new = qmp_marshal_blockdev_snapshot,
1553     },
1554
1555 SQMP
1556 blockdev-snapshot
1557 -----------------
1558 Since 2.5
1559
1560 Create a snapshot, by installing 'node' as the backing image of
1561 'overlay'. Additionally, if 'node' is associated with a block
1562 device, the block device changes to using 'overlay' as its new active
1563 image.
1564
1565 Arguments:
1566
1567 - "node": device that will have a snapshot created (json-string)
1568 - "overlay": device that will have 'node' as its backing image (json-string)
1569
1570 Example:
1571
1572 -> { "execute": "blockdev-add",
1573                 "arguments": { "options": { "driver": "qcow2",
1574                                             "node-name": "node1534",
1575                                             "file": { "driver": "file",
1576                                                       "filename": "hd1.qcow2" },
1577                                             "backing": "" } } }
1578
1579 <- { "return": {} }
1580
1581 -> { "execute": "blockdev-snapshot", "arguments": { "node": "ide-hd0",
1582                                                     "overlay": "node1534" } }
1583 <- { "return": {} }
1584
1585 EQMP
1586
1587     {
1588         .name       = "blockdev-snapshot-internal-sync",
1589         .args_type  = "device:B,name:s",
1590         .mhandler.cmd_new = qmp_marshal_blockdev_snapshot_internal_sync,
1591     },
1592
1593 SQMP
1594 blockdev-snapshot-internal-sync
1595 -------------------------------
1596
1597 Synchronously take an internal snapshot of a block device when the format of
1598 image used supports it.  If the name is an empty string, or a snapshot with
1599 name already exists, the operation will fail.
1600
1601 Arguments:
1602
1603 - "device": device name to snapshot (json-string)
1604 - "name": name of the new snapshot (json-string)
1605
1606 Example:
1607
1608 -> { "execute": "blockdev-snapshot-internal-sync",
1609                 "arguments": { "device": "ide-hd0",
1610                                "name": "snapshot0" }
1611    }
1612 <- { "return": {} }
1613
1614 EQMP
1615
1616     {
1617         .name       = "blockdev-snapshot-delete-internal-sync",
1618         .args_type  = "device:B,id:s?,name:s?",
1619         .mhandler.cmd_new =
1620                       qmp_marshal_blockdev_snapshot_delete_internal_sync,
1621     },
1622
1623 SQMP
1624 blockdev-snapshot-delete-internal-sync
1625 --------------------------------------
1626
1627 Synchronously delete an internal snapshot of a block device when the format of
1628 image used supports it.  The snapshot is identified by name or id or both.  One
1629 of name or id is required.  If the snapshot is not found, the operation will
1630 fail.
1631
1632 Arguments:
1633
1634 - "device": device name (json-string)
1635 - "id": ID of the snapshot (json-string, optional)
1636 - "name": name of the snapshot (json-string, optional)
1637
1638 Example:
1639
1640 -> { "execute": "blockdev-snapshot-delete-internal-sync",
1641                 "arguments": { "device": "ide-hd0",
1642                                "name": "snapshot0" }
1643    }
1644 <- { "return": {
1645                    "id": "1",
1646                    "name": "snapshot0",
1647                    "vm-state-size": 0,
1648                    "date-sec": 1000012,
1649                    "date-nsec": 10,
1650                    "vm-clock-sec": 100,
1651                    "vm-clock-nsec": 20
1652      }
1653    }
1654
1655 EQMP
1656
1657     {
1658         .name       = "drive-mirror",
1659         .args_type  = "sync:s,device:B,target:s,speed:i?,mode:s?,format:s?,"
1660                       "node-name:s?,replaces:s?,"
1661                       "on-source-error:s?,on-target-error:s?,"
1662                       "unmap:b?,"
1663                       "granularity:i?,buf-size:i?",
1664         .mhandler.cmd_new = qmp_marshal_drive_mirror,
1665     },
1666
1667 SQMP
1668 drive-mirror
1669 ------------
1670
1671 Start mirroring a block device's writes to a new destination. target
1672 specifies the target of the new image. If the file exists, or if it is
1673 a device, it will be used as the new destination for writes. If it does not
1674 exist, a new file will be created. format specifies the format of the
1675 mirror image, default is to probe if mode='existing', else the format
1676 of the source.
1677
1678 Arguments:
1679
1680 - "device": device name to operate on (json-string)
1681 - "target": name of new image file (json-string)
1682 - "format": format of new image (json-string, optional)
1683 - "node-name": the name of the new block driver state in the node graph
1684                (json-string, optional)
1685 - "replaces": the block driver node name to replace when finished
1686               (json-string, optional)
1687 - "mode": how an image file should be created into the target
1688   file/device (NewImageMode, optional, default 'absolute-paths')
1689 - "speed": maximum speed of the streaming job, in bytes per second
1690   (json-int)
1691 - "granularity": granularity of the dirty bitmap, in bytes (json-int, optional)
1692 - "buf-size": maximum amount of data in flight from source to target, in bytes
1693   (json-int, default 10M)
1694 - "sync": what parts of the disk image should be copied to the destination;
1695   possibilities include "full" for all the disk, "top" for only the sectors
1696   allocated in the topmost image, or "none" to only replicate new I/O
1697   (MirrorSyncMode).
1698 - "on-source-error": the action to take on an error on the source
1699   (BlockdevOnError, default 'report')
1700 - "on-target-error": the action to take on an error on the target
1701   (BlockdevOnError, default 'report')
1702 - "unmap": whether the target sectors should be discarded where source has only
1703   zeroes. (json-bool, optional, default true)
1704
1705 The default value of the granularity is the image cluster size clamped
1706 between 4096 and 65536, if the image format defines one.  If the format
1707 does not define a cluster size, the default value of the granularity
1708 is 65536.
1709
1710
1711 Example:
1712
1713 -> { "execute": "drive-mirror", "arguments": { "device": "ide-hd0",
1714                                                "target": "/some/place/my-image",
1715                                                "sync": "full",
1716                                                "format": "qcow2" } }
1717 <- { "return": {} }
1718
1719 EQMP
1720
1721     {
1722         .name       = "blockdev-mirror",
1723         .args_type  = "sync:s,device:B,target:B,replaces:s?,speed:i?,"
1724                       "on-source-error:s?,on-target-error:s?,"
1725                       "granularity:i?,buf-size:i?",
1726         .mhandler.cmd_new = qmp_marshal_blockdev_mirror,
1727     },
1728
1729 SQMP
1730 blockdev-mirror
1731 ------------
1732
1733 Start mirroring a block device's writes to another block device. target
1734 specifies the target of mirror operation.
1735
1736 Arguments:
1737
1738 - "device": device name to operate on (json-string)
1739 - "target": device name to mirror to (json-string)
1740 - "replaces": the block driver node name to replace when finished
1741               (json-string, optional)
1742 - "speed": maximum speed of the streaming job, in bytes per second
1743   (json-int)
1744 - "granularity": granularity of the dirty bitmap, in bytes (json-int, optional)
1745 - "buf_size": maximum amount of data in flight from source to target, in bytes
1746   (json-int, default 10M)
1747 - "sync": what parts of the disk image should be copied to the destination;
1748   possibilities include "full" for all the disk, "top" for only the sectors
1749   allocated in the topmost image, or "none" to only replicate new I/O
1750   (MirrorSyncMode).
1751 - "on-source-error": the action to take on an error on the source
1752   (BlockdevOnError, default 'report')
1753 - "on-target-error": the action to take on an error on the target
1754   (BlockdevOnError, default 'report')
1755
1756 The default value of the granularity is the image cluster size clamped
1757 between 4096 and 65536, if the image format defines one.  If the format
1758 does not define a cluster size, the default value of the granularity
1759 is 65536.
1760
1761 Example:
1762
1763 -> { "execute": "blockdev-mirror", "arguments": { "device": "ide-hd0",
1764                                                   "target": "target0",
1765                                                   "sync": "full" } }
1766 <- { "return": {} }
1767
1768 EQMP
1769     {
1770         .name       = "change-backing-file",
1771         .args_type  = "device:s,image-node-name:s,backing-file:s",
1772         .mhandler.cmd_new = qmp_marshal_change_backing_file,
1773     },
1774
1775 SQMP
1776 change-backing-file
1777 -------------------
1778 Since: 2.1
1779
1780 Change the backing file in the image file metadata.  This does not cause
1781 QEMU to reopen the image file to reparse the backing filename (it may,
1782 however, perform a reopen to change permissions from r/o -> r/w -> r/o,
1783 if needed). The new backing file string is written into the image file
1784 metadata, and the QEMU internal strings are updated.
1785
1786 Arguments:
1787
1788 - "image-node-name":    The name of the block driver state node of the
1789                         image to modify.  The "device" is argument is used to
1790                         verify "image-node-name" is in the chain described by
1791                         "device".
1792                         (json-string, optional)
1793
1794 - "device":             The name of the device.
1795                         (json-string)
1796
1797 - "backing-file":       The string to write as the backing file.  This string is
1798                         not validated, so care should be taken when specifying
1799                         the string or the image chain may not be able to be
1800                         reopened again.
1801                         (json-string)
1802
1803 Returns: Nothing on success
1804          If "device" does not exist or cannot be determined, DeviceNotFound
1805
1806 EQMP
1807
1808     {
1809         .name       = "balloon",
1810         .args_type  = "value:M",
1811         .mhandler.cmd_new = qmp_marshal_balloon,
1812     },
1813
1814 SQMP
1815 balloon
1816 -------
1817
1818 Request VM to change its memory allocation (in bytes).
1819
1820 Arguments:
1821
1822 - "value": New memory allocation (json-int)
1823
1824 Example:
1825
1826 -> { "execute": "balloon", "arguments": { "value": 536870912 } }
1827 <- { "return": {} }
1828
1829 EQMP
1830
1831     {
1832         .name       = "set_link",
1833         .args_type  = "name:s,up:b",
1834         .mhandler.cmd_new = qmp_marshal_set_link,
1835     },
1836
1837 SQMP
1838 set_link
1839 --------
1840
1841 Change the link status of a network adapter.
1842
1843 Arguments:
1844
1845 - "name": network device name (json-string)
1846 - "up": status is up (json-bool)
1847
1848 Example:
1849
1850 -> { "execute": "set_link", "arguments": { "name": "e1000.0", "up": false } }
1851 <- { "return": {} }
1852
1853 EQMP
1854
1855     {
1856         .name       = "getfd",
1857         .args_type  = "fdname:s",
1858         .params     = "getfd name",
1859         .help       = "receive a file descriptor via SCM rights and assign it a name",
1860         .mhandler.cmd_new = qmp_marshal_getfd,
1861     },
1862
1863 SQMP
1864 getfd
1865 -----
1866
1867 Receive a file descriptor via SCM rights and assign it a name.
1868
1869 Arguments:
1870
1871 - "fdname": file descriptor name (json-string)
1872
1873 Example:
1874
1875 -> { "execute": "getfd", "arguments": { "fdname": "fd1" } }
1876 <- { "return": {} }
1877
1878 Notes:
1879
1880 (1) If the name specified by the "fdname" argument already exists,
1881     the file descriptor assigned to it will be closed and replaced
1882     by the received file descriptor.
1883 (2) The 'closefd' command can be used to explicitly close the file
1884     descriptor when it is no longer needed.
1885
1886 EQMP
1887
1888     {
1889         .name       = "closefd",
1890         .args_type  = "fdname:s",
1891         .params     = "closefd name",
1892         .help       = "close a file descriptor previously passed via SCM rights",
1893         .mhandler.cmd_new = qmp_marshal_closefd,
1894     },
1895
1896 SQMP
1897 closefd
1898 -------
1899
1900 Close a file descriptor previously passed via SCM rights.
1901
1902 Arguments:
1903
1904 - "fdname": file descriptor name (json-string)
1905
1906 Example:
1907
1908 -> { "execute": "closefd", "arguments": { "fdname": "fd1" } }
1909 <- { "return": {} }
1910
1911 EQMP
1912
1913      {
1914         .name       = "add-fd",
1915         .args_type  = "fdset-id:i?,opaque:s?",
1916         .params     = "add-fd fdset-id opaque",
1917         .help       = "Add a file descriptor, that was passed via SCM rights, to an fd set",
1918         .mhandler.cmd_new = qmp_marshal_add_fd,
1919     },
1920
1921 SQMP
1922 add-fd
1923 -------
1924
1925 Add a file descriptor, that was passed via SCM rights, to an fd set.
1926
1927 Arguments:
1928
1929 - "fdset-id": The ID of the fd set to add the file descriptor to.
1930               (json-int, optional)
1931 - "opaque": A free-form string that can be used to describe the fd.
1932             (json-string, optional)
1933
1934 Return a json-object with the following information:
1935
1936 - "fdset-id": The ID of the fd set that the fd was added to. (json-int)
1937 - "fd": The file descriptor that was received via SCM rights and added to the
1938         fd set. (json-int)
1939
1940 Example:
1941
1942 -> { "execute": "add-fd", "arguments": { "fdset-id": 1 } }
1943 <- { "return": { "fdset-id": 1, "fd": 3 } }
1944
1945 Notes:
1946
1947 (1) The list of fd sets is shared by all monitor connections.
1948 (2) If "fdset-id" is not specified, a new fd set will be created.
1949
1950 EQMP
1951
1952      {
1953         .name       = "remove-fd",
1954         .args_type  = "fdset-id:i,fd:i?",
1955         .params     = "remove-fd fdset-id fd",
1956         .help       = "Remove a file descriptor from an fd set",
1957         .mhandler.cmd_new = qmp_marshal_remove_fd,
1958     },
1959
1960 SQMP
1961 remove-fd
1962 ---------
1963
1964 Remove a file descriptor from an fd set.
1965
1966 Arguments:
1967
1968 - "fdset-id": The ID of the fd set that the file descriptor belongs to.
1969               (json-int)
1970 - "fd": The file descriptor that is to be removed. (json-int, optional)
1971
1972 Example:
1973
1974 -> { "execute": "remove-fd", "arguments": { "fdset-id": 1, "fd": 3 } }
1975 <- { "return": {} }
1976
1977 Notes:
1978
1979 (1) The list of fd sets is shared by all monitor connections.
1980 (2) If "fd" is not specified, all file descriptors in "fdset-id" will be
1981     removed.
1982
1983 EQMP
1984
1985     {
1986         .name       = "query-fdsets",
1987         .args_type  = "",
1988         .help       = "Return information describing all fd sets",
1989         .mhandler.cmd_new = qmp_marshal_query_fdsets,
1990     },
1991
1992 SQMP
1993 query-fdsets
1994 -------------
1995
1996 Return information describing all fd sets.
1997
1998 Arguments: None
1999
2000 Example:
2001
2002 -> { "execute": "query-fdsets" }
2003 <- { "return": [
2004        {
2005          "fds": [
2006            {
2007              "fd": 30,
2008              "opaque": "rdonly:/path/to/file"
2009            },
2010            {
2011              "fd": 24,
2012              "opaque": "rdwr:/path/to/file"
2013            }
2014          ],
2015          "fdset-id": 1
2016        },
2017        {
2018          "fds": [
2019            {
2020              "fd": 28
2021            },
2022            {
2023              "fd": 29
2024            }
2025          ],
2026          "fdset-id": 0
2027        }
2028      ]
2029    }
2030
2031 Note: The list of fd sets is shared by all monitor connections.
2032
2033 EQMP
2034
2035     {
2036         .name       = "block_passwd",
2037         .args_type  = "device:s?,node-name:s?,password:s",
2038         .mhandler.cmd_new = qmp_marshal_block_passwd,
2039     },
2040
2041 SQMP
2042 block_passwd
2043 ------------
2044
2045 Set the password of encrypted block devices.
2046
2047 Arguments:
2048
2049 - "device": device name (json-string)
2050 - "node-name": name in the block driver state graph (json-string)
2051 - "password": password (json-string)
2052
2053 Example:
2054
2055 -> { "execute": "block_passwd", "arguments": { "device": "ide0-hd0",
2056                                                "password": "12345" } }
2057 <- { "return": {} }
2058
2059 EQMP
2060
2061     {
2062         .name       = "block_set_io_throttle",
2063         .args_type  = "device:B,bps:l,bps_rd:l,bps_wr:l,iops:l,iops_rd:l,iops_wr:l,bps_max:l?,bps_rd_max:l?,bps_wr_max:l?,iops_max:l?,iops_rd_max:l?,iops_wr_max:l?,bps_max_length:l?,bps_rd_max_length:l?,bps_wr_max_length:l?,iops_max_length:l?,iops_rd_max_length:l?,iops_wr_max_length:l?,iops_size:l?,group:s?",
2064         .mhandler.cmd_new = qmp_marshal_block_set_io_throttle,
2065     },
2066
2067 SQMP
2068 block_set_io_throttle
2069 ------------
2070
2071 Change I/O throttle limits for a block drive.
2072
2073 Arguments:
2074
2075 - "device": device name (json-string)
2076 - "bps": total throughput limit in bytes per second (json-int)
2077 - "bps_rd": read throughput limit in bytes per second (json-int)
2078 - "bps_wr": write throughput limit in bytes per second (json-int)
2079 - "iops": total I/O operations per second (json-int)
2080 - "iops_rd": read I/O operations per second (json-int)
2081 - "iops_wr": write I/O operations per second (json-int)
2082 - "bps_max": total throughput limit during bursts, in bytes (json-int, optional)
2083 - "bps_rd_max": read throughput limit during bursts, in bytes (json-int, optional)
2084 - "bps_wr_max": write throughput limit during bursts, in bytes (json-int, optional)
2085 - "iops_max": total I/O operations per second during bursts (json-int, optional)
2086 - "iops_rd_max": read I/O operations per second during bursts (json-int, optional)
2087 - "iops_wr_max": write I/O operations per second during bursts (json-int, optional)
2088 - "bps_max_length": maximum length of the @bps_max burst period, in seconds (json-int, optional)
2089 - "bps_rd_max_length": maximum length of the @bps_rd_max burst period, in seconds (json-int, optional)
2090 - "bps_wr_max_length": maximum length of the @bps_wr_max burst period, in seconds (json-int, optional)
2091 - "iops_max_length": maximum length of the @iops_max burst period, in seconds (json-int, optional)
2092 - "iops_rd_max_length": maximum length of the @iops_rd_max burst period, in seconds (json-int, optional)
2093 - "iops_wr_max_length": maximum length of the @iops_wr_max burst period, in seconds (json-int, optional)
2094 - "iops_size":  I/O size in bytes when limiting (json-int, optional)
2095 - "group": throttle group name (json-string, optional)
2096
2097 Example:
2098
2099 -> { "execute": "block_set_io_throttle", "arguments": { "device": "virtio0",
2100                                                "bps": 1000000,
2101                                                "bps_rd": 0,
2102                                                "bps_wr": 0,
2103                                                "iops": 0,
2104                                                "iops_rd": 0,
2105                                                "iops_wr": 0,
2106                                                "bps_max": 8000000,
2107                                                "bps_rd_max": 0,
2108                                                "bps_wr_max": 0,
2109                                                "iops_max": 0,
2110                                                "iops_rd_max": 0,
2111                                                "iops_wr_max": 0,
2112                                                "bps_max_length": 60,
2113                                                "iops_size": 0 } }
2114 <- { "return": {} }
2115
2116 EQMP
2117
2118     {
2119         .name       = "set_password",
2120         .args_type  = "protocol:s,password:s,connected:s?",
2121         .mhandler.cmd_new = qmp_marshal_set_password,
2122     },
2123
2124 SQMP
2125 set_password
2126 ------------
2127
2128 Set the password for vnc/spice protocols.
2129
2130 Arguments:
2131
2132 - "protocol": protocol name (json-string)
2133 - "password": password (json-string)
2134 - "connected": [ keep | disconnect | fail ] (json-string, optional)
2135
2136 Example:
2137
2138 -> { "execute": "set_password", "arguments": { "protocol": "vnc",
2139                                                "password": "secret" } }
2140 <- { "return": {} }
2141
2142 EQMP
2143
2144     {
2145         .name       = "expire_password",
2146         .args_type  = "protocol:s,time:s",
2147         .mhandler.cmd_new = qmp_marshal_expire_password,
2148     },
2149
2150 SQMP
2151 expire_password
2152 ---------------
2153
2154 Set the password expire time for vnc/spice protocols.
2155
2156 Arguments:
2157
2158 - "protocol": protocol name (json-string)
2159 - "time": [ now | never | +secs | secs ] (json-string)
2160
2161 Example:
2162
2163 -> { "execute": "expire_password", "arguments": { "protocol": "vnc",
2164                                                   "time": "+60" } }
2165 <- { "return": {} }
2166
2167 EQMP
2168
2169     {
2170         .name       = "add_client",
2171         .args_type  = "protocol:s,fdname:s,skipauth:b?,tls:b?",
2172         .mhandler.cmd_new = qmp_marshal_add_client,
2173     },
2174
2175 SQMP
2176 add_client
2177 ----------
2178
2179 Add a graphics client
2180
2181 Arguments:
2182
2183 - "protocol": protocol name (json-string)
2184 - "fdname": file descriptor name (json-string)
2185 - "skipauth": whether to skip authentication (json-bool, optional)
2186 - "tls": whether to perform TLS (json-bool, optional)
2187
2188 Example:
2189
2190 -> { "execute": "add_client", "arguments": { "protocol": "vnc",
2191                                              "fdname": "myclient" } }
2192 <- { "return": {} }
2193
2194 EQMP
2195     {
2196         .name       = "qmp_capabilities",
2197         .args_type  = "",
2198         .params     = "",
2199         .help       = "enable QMP capabilities",
2200         .mhandler.cmd_new = qmp_capabilities,
2201     },
2202
2203 SQMP
2204 qmp_capabilities
2205 ----------------
2206
2207 Enable QMP capabilities.
2208
2209 Arguments: None.
2210
2211 Example:
2212
2213 -> { "execute": "qmp_capabilities" }
2214 <- { "return": {} }
2215
2216 Note: This command must be issued before issuing any other command.
2217
2218 EQMP
2219
2220     {
2221         .name       = "human-monitor-command",
2222         .args_type  = "command-line:s,cpu-index:i?",
2223         .mhandler.cmd_new = qmp_marshal_human_monitor_command,
2224     },
2225
2226 SQMP
2227 human-monitor-command
2228 ---------------------
2229
2230 Execute a Human Monitor command.
2231
2232 Arguments:
2233
2234 - command-line: the command name and its arguments, just like the
2235                 Human Monitor's shell (json-string)
2236 - cpu-index: select the CPU number to be used by commands which access CPU
2237              data, like 'info registers'. The Monitor selects CPU 0 if this
2238              argument is not provided (json-int, optional)
2239
2240 Example:
2241
2242 -> { "execute": "human-monitor-command", "arguments": { "command-line": "info kvm" } }
2243 <- { "return": "kvm support: enabled\r\n" }
2244
2245 Notes:
2246
2247 (1) The Human Monitor is NOT an stable interface, this means that command
2248     names, arguments and responses can change or be removed at ANY time.
2249     Applications that rely on long term stability guarantees should NOT
2250     use this command
2251
2252 (2) Limitations:
2253
2254     o This command is stateless, this means that commands that depend
2255       on state information (such as getfd) might not work
2256
2257     o Commands that prompt the user for data (eg. 'cont' when the block
2258       device is encrypted) don't currently work
2259
2260 3. Query Commands
2261 =================
2262
2263 HXCOMM Each query command below is inside a SQMP/EQMP section, do NOT change
2264 HXCOMM this! We will possibly move query commands definitions inside those
2265 HXCOMM sections, just like regular commands.
2266
2267 EQMP
2268
2269 SQMP
2270 query-version
2271 -------------
2272
2273 Show QEMU version.
2274
2275 Return a json-object with the following information:
2276
2277 - "qemu": A json-object containing three integer values:
2278     - "major": QEMU's major version (json-int)
2279     - "minor": QEMU's minor version (json-int)
2280     - "micro": QEMU's micro version (json-int)
2281 - "package": package's version (json-string)
2282
2283 Example:
2284
2285 -> { "execute": "query-version" }
2286 <- {
2287       "return":{
2288          "qemu":{
2289             "major":0,
2290             "minor":11,
2291             "micro":5
2292          },
2293          "package":""
2294       }
2295    }
2296
2297 EQMP
2298
2299     {
2300         .name       = "query-version",
2301         .args_type  = "",
2302         .mhandler.cmd_new = qmp_marshal_query_version,
2303     },
2304
2305 SQMP
2306 query-commands
2307 --------------
2308
2309 List QMP available commands.
2310
2311 Each command is represented by a json-object, the returned value is a json-array
2312 of all commands.
2313
2314 Each json-object contain:
2315
2316 - "name": command's name (json-string)
2317
2318 Example:
2319
2320 -> { "execute": "query-commands" }
2321 <- {
2322       "return":[
2323          {
2324             "name":"query-balloon"
2325          },
2326          {
2327             "name":"system_powerdown"
2328          }
2329       ]
2330    }
2331
2332 Note: This example has been shortened as the real response is too long.
2333
2334 EQMP
2335
2336     {
2337         .name       = "query-commands",
2338         .args_type  = "",
2339         .mhandler.cmd_new = qmp_marshal_query_commands,
2340     },
2341
2342 SQMP
2343 query-events
2344 --------------
2345
2346 List QMP available events.
2347
2348 Each event is represented by a json-object, the returned value is a json-array
2349 of all events.
2350
2351 Each json-object contains:
2352
2353 - "name": event's name (json-string)
2354
2355 Example:
2356
2357 -> { "execute": "query-events" }
2358 <- {
2359       "return":[
2360          {
2361             "name":"SHUTDOWN"
2362          },
2363          {
2364             "name":"RESET"
2365          }
2366       ]
2367    }
2368
2369 Note: This example has been shortened as the real response is too long.
2370
2371 EQMP
2372
2373     {
2374         .name       = "query-events",
2375         .args_type  = "",
2376         .mhandler.cmd_new = qmp_marshal_query_events,
2377     },
2378
2379 SQMP
2380 query-qmp-schema
2381 ----------------
2382
2383 Return the QMP wire schema.  The returned value is a json-array of
2384 named schema entities.  Entities are commands, events and various
2385 types.  See docs/qapi-code-gen.txt for information on their structure
2386 and intended use.
2387
2388 EQMP
2389
2390     {
2391         .name       = "query-qmp-schema",
2392         .args_type  = "",
2393         .mhandler.cmd_new = qmp_query_qmp_schema,
2394     },
2395
2396 SQMP
2397 query-chardev
2398 -------------
2399
2400 Each device is represented by a json-object. The returned value is a json-array
2401 of all devices.
2402
2403 Each json-object contain the following:
2404
2405 - "label": device's label (json-string)
2406 - "filename": device's file (json-string)
2407 - "frontend-open": open/closed state of the frontend device attached to this
2408                    backend (json-bool)
2409
2410 Example:
2411
2412 -> { "execute": "query-chardev" }
2413 <- {
2414       "return": [
2415          {
2416             "label": "charchannel0",
2417             "filename": "unix:/var/lib/libvirt/qemu/seabios.rhel6.agent,server",
2418             "frontend-open": false
2419          },
2420          {
2421             "label": "charmonitor",
2422             "filename": "unix:/var/lib/libvirt/qemu/seabios.rhel6.monitor,server",
2423             "frontend-open": true
2424          },
2425          {
2426             "label": "charserial0",
2427             "filename": "pty:/dev/pts/2",
2428             "frontend-open": true
2429          }
2430       ]
2431    }
2432
2433 EQMP
2434
2435     {
2436         .name       = "query-chardev",
2437         .args_type  = "",
2438         .mhandler.cmd_new = qmp_marshal_query_chardev,
2439     },
2440
2441 SQMP
2442 query-chardev-backends
2443 -------------
2444
2445 List available character device backends.
2446
2447 Each backend is represented by a json-object, the returned value is a json-array
2448 of all backends.
2449
2450 Each json-object contains:
2451
2452 - "name": backend name (json-string)
2453
2454 Example:
2455
2456 -> { "execute": "query-chardev-backends" }
2457 <- {
2458       "return":[
2459          {
2460             "name":"udp"
2461          },
2462          {
2463             "name":"tcp"
2464          },
2465          {
2466             "name":"unix"
2467          },
2468          {
2469             "name":"spiceport"
2470          }
2471       ]
2472    }
2473
2474 EQMP
2475
2476     {
2477         .name       = "query-chardev-backends",
2478         .args_type  = "",
2479         .mhandler.cmd_new = qmp_marshal_query_chardev_backends,
2480     },
2481
2482 SQMP
2483 query-block
2484 -----------
2485
2486 Show the block devices.
2487
2488 Each block device information is stored in a json-object and the returned value
2489 is a json-array of all devices.
2490
2491 Each json-object contain the following:
2492
2493 - "device": device name (json-string)
2494 - "type": device type (json-string)
2495          - deprecated, retained for backward compatibility
2496          - Possible values: "unknown"
2497 - "removable": true if the device is removable, false otherwise (json-bool)
2498 - "locked": true if the device is locked, false otherwise (json-bool)
2499 - "tray_open": only present if removable, true if the device has a tray,
2500                and it is open (json-bool)
2501 - "inserted": only present if the device is inserted, it is a json-object
2502    containing the following:
2503          - "file": device file name (json-string)
2504          - "ro": true if read-only, false otherwise (json-bool)
2505          - "drv": driver format name (json-string)
2506              - Possible values: "blkdebug", "bochs", "cloop", "dmg",
2507                                 "file", "file", "ftp", "ftps", "host_cdrom",
2508                                 "host_device", "http", "https",
2509                                 "nbd", "parallels", "qcow", "qcow2", "raw",
2510                                 "tftp", "vdi", "vmdk", "vpc", "vvfat"
2511          - "backing_file": backing file name (json-string, optional)
2512          - "backing_file_depth": number of files in the backing file chain (json-int)
2513          - "encrypted": true if encrypted, false otherwise (json-bool)
2514          - "bps": limit total bytes per second (json-int)
2515          - "bps_rd": limit read bytes per second (json-int)
2516          - "bps_wr": limit write bytes per second (json-int)
2517          - "iops": limit total I/O operations per second (json-int)
2518          - "iops_rd": limit read operations per second (json-int)
2519          - "iops_wr": limit write operations per second (json-int)
2520          - "bps_max":  total max in bytes (json-int)
2521          - "bps_rd_max":  read max in bytes (json-int)
2522          - "bps_wr_max":  write max in bytes (json-int)
2523          - "iops_max":  total I/O operations max (json-int)
2524          - "iops_rd_max":  read I/O operations max (json-int)
2525          - "iops_wr_max":  write I/O operations max (json-int)
2526          - "iops_size": I/O size when limiting by iops (json-int)
2527          - "detect_zeroes": detect and optimize zero writing (json-string)
2528              - Possible values: "off", "on", "unmap"
2529          - "write_threshold": write offset threshold in bytes, a event will be
2530                               emitted if crossed. Zero if disabled (json-int)
2531          - "image": the detail of the image, it is a json-object containing
2532             the following:
2533              - "filename": image file name (json-string)
2534              - "format": image format (json-string)
2535              - "virtual-size": image capacity in bytes (json-int)
2536              - "dirty-flag": true if image is not cleanly closed, not present
2537                              means clean (json-bool, optional)
2538              - "actual-size": actual size on disk in bytes of the image, not
2539                               present when image does not support thin
2540                               provision (json-int, optional)
2541              - "cluster-size": size of a cluster in bytes, not present if image
2542                                format does not support it (json-int, optional)
2543              - "encrypted": true if the image is encrypted, not present means
2544                             false or the image format does not support
2545                             encryption (json-bool, optional)
2546              - "backing_file": backing file name, not present means no backing
2547                                file is used or the image format does not
2548                                support backing file chain
2549                                (json-string, optional)
2550              - "full-backing-filename": full path of the backing file, not
2551                                         present if it equals backing_file or no
2552                                         backing file is used
2553                                         (json-string, optional)
2554              - "backing-filename-format": the format of the backing file, not
2555                                           present means unknown or no backing
2556                                           file (json-string, optional)
2557              - "snapshots": the internal snapshot info, it is an optional list
2558                 of json-object containing the following:
2559                  - "id": unique snapshot id (json-string)
2560                  - "name": snapshot name (json-string)
2561                  - "vm-state-size": size of the VM state in bytes (json-int)
2562                  - "date-sec": UTC date of the snapshot in seconds (json-int)
2563                  - "date-nsec": fractional part in nanoseconds to be used with
2564                                 date-sec (json-int)
2565                  - "vm-clock-sec": VM clock relative to boot in seconds
2566                                    (json-int)
2567                  - "vm-clock-nsec": fractional part in nanoseconds to be used
2568                                     with vm-clock-sec (json-int)
2569              - "backing-image": the detail of the backing image, it is an
2570                                 optional json-object only present when a
2571                                 backing image present for this image
2572
2573 - "io-status": I/O operation status, only present if the device supports it
2574                and the VM is configured to stop on errors. It's always reset
2575                to "ok" when the "cont" command is issued (json_string, optional)
2576              - Possible values: "ok", "failed", "nospace"
2577
2578 Example:
2579
2580 -> { "execute": "query-block" }
2581 <- {
2582       "return":[
2583          {
2584             "io-status": "ok",
2585             "device":"ide0-hd0",
2586             "locked":false,
2587             "removable":false,
2588             "inserted":{
2589                "ro":false,
2590                "drv":"qcow2",
2591                "encrypted":false,
2592                "file":"disks/test.qcow2",
2593                "backing_file_depth":1,
2594                "bps":1000000,
2595                "bps_rd":0,
2596                "bps_wr":0,
2597                "iops":1000000,
2598                "iops_rd":0,
2599                "iops_wr":0,
2600                "bps_max": 8000000,
2601                "bps_rd_max": 0,
2602                "bps_wr_max": 0,
2603                "iops_max": 0,
2604                "iops_rd_max": 0,
2605                "iops_wr_max": 0,
2606                "iops_size": 0,
2607                "detect_zeroes": "on",
2608                "write_threshold": 0,
2609                "image":{
2610                   "filename":"disks/test.qcow2",
2611                   "format":"qcow2",
2612                   "virtual-size":2048000,
2613                   "backing_file":"base.qcow2",
2614                   "full-backing-filename":"disks/base.qcow2",
2615                   "backing-filename-format":"qcow2",
2616                   "snapshots":[
2617                      {
2618                         "id": "1",
2619                         "name": "snapshot1",
2620                         "vm-state-size": 0,
2621                         "date-sec": 10000200,
2622                         "date-nsec": 12,
2623                         "vm-clock-sec": 206,
2624                         "vm-clock-nsec": 30
2625                      }
2626                   ],
2627                   "backing-image":{
2628                       "filename":"disks/base.qcow2",
2629                       "format":"qcow2",
2630                       "virtual-size":2048000
2631                   }
2632                }
2633             },
2634             "type":"unknown"
2635          },
2636          {
2637             "io-status": "ok",
2638             "device":"ide1-cd0",
2639             "locked":false,
2640             "removable":true,
2641             "type":"unknown"
2642          },
2643          {
2644             "device":"floppy0",
2645             "locked":false,
2646             "removable":true,
2647             "type":"unknown"
2648          },
2649          {
2650             "device":"sd0",
2651             "locked":false,
2652             "removable":true,
2653             "type":"unknown"
2654          }
2655       ]
2656    }
2657
2658 EQMP
2659
2660     {
2661         .name       = "query-block",
2662         .args_type  = "",
2663         .mhandler.cmd_new = qmp_marshal_query_block,
2664     },
2665
2666 SQMP
2667 query-blockstats
2668 ----------------
2669
2670 Show block device statistics.
2671
2672 Each device statistic information is stored in a json-object and the returned
2673 value is a json-array of all devices.
2674
2675 Each json-object contain the following:
2676
2677 - "device": device name (json-string)
2678 - "stats": A json-object with the statistics information, it contains:
2679     - "rd_bytes": bytes read (json-int)
2680     - "wr_bytes": bytes written (json-int)
2681     - "rd_operations": read operations (json-int)
2682     - "wr_operations": write operations (json-int)
2683     - "flush_operations": cache flush operations (json-int)
2684     - "wr_total_time_ns": total time spend on writes in nano-seconds (json-int)
2685     - "rd_total_time_ns": total time spend on reads in nano-seconds (json-int)
2686     - "flush_total_time_ns": total time spend on cache flushes in nano-seconds (json-int)
2687     - "wr_highest_offset": The offset after the greatest byte written to the
2688                            BlockDriverState since it has been opened (json-int)
2689     - "rd_merged": number of read requests that have been merged into
2690                    another request (json-int)
2691     - "wr_merged": number of write requests that have been merged into
2692                    another request (json-int)
2693     - "idle_time_ns": time since the last I/O operation, in
2694                       nanoseconds. If the field is absent it means
2695                       that there haven't been any operations yet
2696                       (json-int, optional)
2697     - "failed_rd_operations": number of failed read operations
2698                               (json-int)
2699     - "failed_wr_operations": number of failed write operations
2700                               (json-int)
2701     - "failed_flush_operations": number of failed flush operations
2702                                (json-int)
2703     - "invalid_rd_operations": number of invalid read operations
2704                                (json-int)
2705     - "invalid_wr_operations": number of invalid write operations
2706                                (json-int)
2707     - "invalid_flush_operations": number of invalid flush operations
2708                                   (json-int)
2709     - "account_invalid": whether invalid operations are included in
2710                          the last access statistics (json-bool)
2711     - "account_failed": whether failed operations are included in the
2712                          latency and last access statistics
2713                          (json-bool)
2714     - "timed_stats": A json-array containing statistics collected in
2715                      specific intervals, with the following members:
2716         - "interval_length": interval used for calculating the
2717                              statistics, in seconds (json-int)
2718         - "min_rd_latency_ns": minimum latency of read operations in
2719                                the defined interval, in nanoseconds
2720                                (json-int)
2721         - "min_wr_latency_ns": minimum latency of write operations in
2722                                the defined interval, in nanoseconds
2723                                (json-int)
2724         - "min_flush_latency_ns": minimum latency of flush operations
2725                                   in the defined interval, in
2726                                   nanoseconds (json-int)
2727         - "max_rd_latency_ns": maximum latency of read operations in
2728                                the defined interval, in nanoseconds
2729                                (json-int)
2730         - "max_wr_latency_ns": maximum latency of write operations in
2731                                the defined interval, in nanoseconds
2732                                (json-int)
2733         - "max_flush_latency_ns": maximum latency of flush operations
2734                                   in the defined interval, in
2735                                   nanoseconds (json-int)
2736         - "avg_rd_latency_ns": average latency of read operations in
2737                                the defined interval, in nanoseconds
2738                                (json-int)
2739         - "avg_wr_latency_ns": average latency of write operations in
2740                                the defined interval, in nanoseconds
2741                                (json-int)
2742         - "avg_flush_latency_ns": average latency of flush operations
2743                                   in the defined interval, in
2744                                   nanoseconds (json-int)
2745         - "avg_rd_queue_depth": average number of pending read
2746                                 operations in the defined interval
2747                                 (json-number)
2748         - "avg_wr_queue_depth": average number of pending write
2749                                 operations in the defined interval
2750                                 (json-number).
2751 - "parent": Contains recursively the statistics of the underlying
2752             protocol (e.g. the host file for a qcow2 image). If there is
2753             no underlying protocol, this field is omitted
2754             (json-object, optional)
2755
2756 Example:
2757
2758 -> { "execute": "query-blockstats" }
2759 <- {
2760       "return":[
2761          {
2762             "device":"ide0-hd0",
2763             "parent":{
2764                "stats":{
2765                   "wr_highest_offset":3686448128,
2766                   "wr_bytes":9786368,
2767                   "wr_operations":751,
2768                   "rd_bytes":122567168,
2769                   "rd_operations":36772
2770                   "wr_total_times_ns":313253456
2771                   "rd_total_times_ns":3465673657
2772                   "flush_total_times_ns":49653
2773                   "flush_operations":61,
2774                   "rd_merged":0,
2775                   "wr_merged":0,
2776                   "idle_time_ns":2953431879,
2777                   "account_invalid":true,
2778                   "account_failed":false
2779                }
2780             },
2781             "stats":{
2782                "wr_highest_offset":2821110784,
2783                "wr_bytes":9786368,
2784                "wr_operations":692,
2785                "rd_bytes":122739200,
2786                "rd_operations":36604
2787                "flush_operations":51,
2788                "wr_total_times_ns":313253456
2789                "rd_total_times_ns":3465673657
2790                "flush_total_times_ns":49653,
2791                "rd_merged":0,
2792                "wr_merged":0,
2793                "idle_time_ns":2953431879,
2794                "account_invalid":true,
2795                "account_failed":false
2796             }
2797          },
2798          {
2799             "device":"ide1-cd0",
2800             "stats":{
2801                "wr_highest_offset":0,
2802                "wr_bytes":0,
2803                "wr_operations":0,
2804                "rd_bytes":0,
2805                "rd_operations":0
2806                "flush_operations":0,
2807                "wr_total_times_ns":0
2808                "rd_total_times_ns":0
2809                "flush_total_times_ns":0,
2810                "rd_merged":0,
2811                "wr_merged":0,
2812                "account_invalid":false,
2813                "account_failed":false
2814             }
2815          },
2816          {
2817             "device":"floppy0",
2818             "stats":{
2819                "wr_highest_offset":0,
2820                "wr_bytes":0,
2821                "wr_operations":0,
2822                "rd_bytes":0,
2823                "rd_operations":0
2824                "flush_operations":0,
2825                "wr_total_times_ns":0
2826                "rd_total_times_ns":0
2827                "flush_total_times_ns":0,
2828                "rd_merged":0,
2829                "wr_merged":0,
2830                "account_invalid":false,
2831                "account_failed":false
2832             }
2833          },
2834          {
2835             "device":"sd0",
2836             "stats":{
2837                "wr_highest_offset":0,
2838                "wr_bytes":0,
2839                "wr_operations":0,
2840                "rd_bytes":0,
2841                "rd_operations":0
2842                "flush_operations":0,
2843                "wr_total_times_ns":0
2844                "rd_total_times_ns":0
2845                "flush_total_times_ns":0,
2846                "rd_merged":0,
2847                "wr_merged":0,
2848                "account_invalid":false,
2849                "account_failed":false
2850             }
2851          }
2852       ]
2853    }
2854
2855 EQMP
2856
2857     {
2858         .name       = "query-blockstats",
2859         .args_type  = "query-nodes:b?",
2860         .mhandler.cmd_new = qmp_marshal_query_blockstats,
2861     },
2862
2863 SQMP
2864 query-cpus
2865 ----------
2866
2867 Show CPU information.
2868
2869 Return a json-array. Each CPU is represented by a json-object, which contains:
2870
2871 - "CPU": CPU index (json-int)
2872 - "current": true if this is the current CPU, false otherwise (json-bool)
2873 - "halted": true if the cpu is halted, false otherwise (json-bool)
2874 - "qom_path": path to the CPU object in the QOM tree (json-str)
2875 - "arch": architecture of the cpu, which determines what additional
2876           keys will be present (json-str)
2877 - Current program counter. The key's name depends on the architecture:
2878      "pc": i386/x86_64 (json-int)
2879      "nip": PPC (json-int)
2880      "pc" and "npc": sparc (json-int)
2881      "PC": mips (json-int)
2882 - "thread_id": ID of the underlying host thread (json-int)
2883
2884 Example:
2885
2886 -> { "execute": "query-cpus" }
2887 <- {
2888       "return":[
2889          {
2890             "CPU":0,
2891             "current":true,
2892             "halted":false,
2893             "qom_path":"/machine/unattached/device[0]",
2894             "arch":"x86",
2895             "pc":3227107138,
2896             "thread_id":3134
2897          },
2898          {
2899             "CPU":1,
2900             "current":false,
2901             "halted":true,
2902             "qom_path":"/machine/unattached/device[2]",
2903             "arch":"x86",
2904             "pc":7108165,
2905             "thread_id":3135
2906          }
2907       ]
2908    }
2909
2910 EQMP
2911
2912     {
2913         .name       = "query-cpus",
2914         .args_type  = "",
2915         .mhandler.cmd_new = qmp_marshal_query_cpus,
2916     },
2917
2918 SQMP
2919 query-iothreads
2920 ---------------
2921
2922 Returns a list of information about each iothread.
2923
2924 Note this list excludes the QEMU main loop thread, which is not declared
2925 using the -object iothread command-line option.  It is always the main thread
2926 of the process.
2927
2928 Return a json-array. Each iothread is represented by a json-object, which contains:
2929
2930 - "id": name of iothread (json-str)
2931 - "thread-id": ID of the underlying host thread (json-int)
2932
2933 Example:
2934
2935 -> { "execute": "query-iothreads" }
2936 <- {
2937       "return":[
2938          {
2939             "id":"iothread0",
2940             "thread-id":3134
2941          },
2942          {
2943             "id":"iothread1",
2944             "thread-id":3135
2945          }
2946       ]
2947    }
2948
2949 EQMP
2950
2951     {
2952         .name       = "query-iothreads",
2953         .args_type  = "",
2954         .mhandler.cmd_new = qmp_marshal_query_iothreads,
2955     },
2956
2957 SQMP
2958 query-pci
2959 ---------
2960
2961 PCI buses and devices information.
2962
2963 The returned value is a json-array of all buses. Each bus is represented by
2964 a json-object, which has a key with a json-array of all PCI devices attached
2965 to it. Each device is represented by a json-object.
2966
2967 The bus json-object contains the following:
2968
2969 - "bus": bus number (json-int)
2970 - "devices": a json-array of json-objects, each json-object represents a
2971              PCI device
2972
2973 The PCI device json-object contains the following:
2974
2975 - "bus": identical to the parent's bus number (json-int)
2976 - "slot": slot number (json-int)
2977 - "function": function number (json-int)
2978 - "class_info": a json-object containing:
2979      - "desc": device class description (json-string, optional)
2980      - "class": device class number (json-int)
2981 - "id": a json-object containing:
2982      - "device": device ID (json-int)
2983      - "vendor": vendor ID (json-int)
2984 - "irq": device's IRQ if assigned (json-int, optional)
2985 - "qdev_id": qdev id string (json-string)
2986 - "pci_bridge": It's a json-object, only present if this device is a
2987                 PCI bridge, contains:
2988      - "bus": bus number (json-int)
2989      - "secondary": secondary bus number (json-int)
2990      - "subordinate": subordinate bus number (json-int)
2991      - "io_range": I/O memory range information, a json-object with the
2992                    following members:
2993                  - "base": base address, in bytes (json-int)
2994                  - "limit": limit address, in bytes (json-int)
2995      - "memory_range": memory range information, a json-object with the
2996                        following members:
2997                  - "base": base address, in bytes (json-int)
2998                  - "limit": limit address, in bytes (json-int)
2999      - "prefetchable_range": Prefetchable memory range information, a
3000                              json-object with the following members:
3001                  - "base": base address, in bytes (json-int)
3002                  - "limit": limit address, in bytes (json-int)
3003      - "devices": a json-array of PCI devices if there's any attached, each
3004                   each element is represented by a json-object, which contains
3005                   the same members of the 'PCI device json-object' described
3006                   above (optional)
3007 - "regions": a json-array of json-objects, each json-object represents a
3008              memory region of this device
3009
3010 The memory range json-object contains the following:
3011
3012 - "base": base memory address (json-int)
3013 - "limit": limit value (json-int)
3014
3015 The region json-object can be an I/O region or a memory region, an I/O region
3016 json-object contains the following:
3017
3018 - "type": "io" (json-string, fixed)
3019 - "bar": BAR number (json-int)
3020 - "address": memory address (json-int)
3021 - "size": memory size (json-int)
3022
3023 A memory region json-object contains the following:
3024
3025 - "type": "memory" (json-string, fixed)
3026 - "bar": BAR number (json-int)
3027 - "address": memory address (json-int)
3028 - "size": memory size (json-int)
3029 - "mem_type_64": true or false (json-bool)
3030 - "prefetch": true or false (json-bool)
3031
3032 Example:
3033
3034 -> { "execute": "query-pci" }
3035 <- {
3036       "return":[
3037          {
3038             "bus":0,
3039             "devices":[
3040                {
3041                   "bus":0,
3042                   "qdev_id":"",
3043                   "slot":0,
3044                   "class_info":{
3045                      "class":1536,
3046                      "desc":"Host bridge"
3047                   },
3048                   "id":{
3049                      "device":32902,
3050                      "vendor":4663
3051                   },
3052                   "function":0,
3053                   "regions":[
3054
3055                   ]
3056                },
3057                {
3058                   "bus":0,
3059                   "qdev_id":"",
3060                   "slot":1,
3061                   "class_info":{
3062                      "class":1537,
3063                      "desc":"ISA bridge"
3064                   },
3065                   "id":{
3066                      "device":32902,
3067                      "vendor":28672
3068                   },
3069                   "function":0,
3070                   "regions":[
3071
3072                   ]
3073                },
3074                {
3075                   "bus":0,
3076                   "qdev_id":"",
3077                   "slot":1,
3078                   "class_info":{
3079                      "class":257,
3080                      "desc":"IDE controller"
3081                   },
3082                   "id":{
3083                      "device":32902,
3084                      "vendor":28688
3085                   },
3086                   "function":1,
3087                   "regions":[
3088                      {
3089                         "bar":4,
3090                         "size":16,
3091                         "address":49152,
3092                         "type":"io"
3093                      }
3094                   ]
3095                },
3096                {
3097                   "bus":0,
3098                   "qdev_id":"",
3099                   "slot":2,
3100                   "class_info":{
3101                      "class":768,
3102                      "desc":"VGA controller"
3103                   },
3104                   "id":{
3105                      "device":4115,
3106                      "vendor":184
3107                   },
3108                   "function":0,
3109                   "regions":[
3110                      {
3111                         "prefetch":true,
3112                         "mem_type_64":false,
3113                         "bar":0,
3114                         "size":33554432,
3115                         "address":4026531840,
3116                         "type":"memory"
3117                      },
3118                      {
3119                         "prefetch":false,
3120                         "mem_type_64":false,
3121                         "bar":1,
3122                         "size":4096,
3123                         "address":4060086272,
3124                         "type":"memory"
3125                      },
3126                      {
3127                         "prefetch":false,
3128                         "mem_type_64":false,
3129                         "bar":6,
3130                         "size":65536,
3131                         "address":-1,
3132                         "type":"memory"
3133                      }
3134                   ]
3135                },
3136                {
3137                   "bus":0,
3138                   "qdev_id":"",
3139                   "irq":11,
3140                   "slot":4,
3141                   "class_info":{
3142                      "class":1280,
3143                      "desc":"RAM controller"
3144                   },
3145                   "id":{
3146                      "device":6900,
3147                      "vendor":4098
3148                   },
3149                   "function":0,
3150                   "regions":[
3151                      {
3152                         "bar":0,
3153                         "size":32,
3154                         "address":49280,
3155                         "type":"io"
3156                      }
3157                   ]
3158                }
3159             ]
3160          }
3161       ]
3162    }
3163
3164 Note: This example has been shortened as the real response is too long.
3165
3166 EQMP
3167
3168     {
3169         .name       = "query-pci",
3170         .args_type  = "",
3171         .mhandler.cmd_new = qmp_marshal_query_pci,
3172     },
3173
3174 SQMP
3175 query-kvm
3176 ---------
3177
3178 Show KVM information.
3179
3180 Return a json-object with the following information:
3181
3182 - "enabled": true if KVM support is enabled, false otherwise (json-bool)
3183 - "present": true if QEMU has KVM support, false otherwise (json-bool)
3184
3185 Example:
3186
3187 -> { "execute": "query-kvm" }
3188 <- { "return": { "enabled": true, "present": true } }
3189
3190 EQMP
3191
3192     {
3193         .name       = "query-kvm",
3194         .args_type  = "",
3195         .mhandler.cmd_new = qmp_marshal_query_kvm,
3196     },
3197
3198 SQMP
3199 query-status
3200 ------------
3201
3202 Return a json-object with the following information:
3203
3204 - "running": true if the VM is running, or false if it is paused (json-bool)
3205 - "singlestep": true if the VM is in single step mode,
3206                 false otherwise (json-bool)
3207 - "status": one of the following values (json-string)
3208     "debug" - QEMU is running on a debugger
3209     "inmigrate" - guest is paused waiting for an incoming migration
3210     "internal-error" - An internal error that prevents further guest
3211     execution has occurred
3212     "io-error" - the last IOP has failed and the device is configured
3213     to pause on I/O errors
3214     "paused" - guest has been paused via the 'stop' command
3215     "postmigrate" - guest is paused following a successful 'migrate'
3216     "prelaunch" - QEMU was started with -S and guest has not started
3217     "finish-migrate" - guest is paused to finish the migration process
3218     "restore-vm" - guest is paused to restore VM state
3219     "running" - guest is actively running
3220     "save-vm" - guest is paused to save the VM state
3221     "shutdown" - guest is shut down (and -no-shutdown is in use)
3222     "watchdog" - the watchdog action is configured to pause and
3223      has been triggered
3224
3225 Example:
3226
3227 -> { "execute": "query-status" }
3228 <- { "return": { "running": true, "singlestep": false, "status": "running" } }
3229
3230 EQMP
3231
3232     {
3233         .name       = "query-status",
3234         .args_type  = "",
3235         .mhandler.cmd_new = qmp_marshal_query_status,
3236     },
3237
3238 SQMP
3239 query-mice
3240 ----------
3241
3242 Show VM mice information.
3243
3244 Each mouse is represented by a json-object, the returned value is a json-array
3245 of all mice.
3246
3247 The mouse json-object contains the following:
3248
3249 - "name": mouse's name (json-string)
3250 - "index": mouse's index (json-int)
3251 - "current": true if this mouse is receiving events, false otherwise (json-bool)
3252 - "absolute": true if the mouse generates absolute input events (json-bool)
3253
3254 Example:
3255
3256 -> { "execute": "query-mice" }
3257 <- {
3258       "return":[
3259          {
3260             "name":"QEMU Microsoft Mouse",
3261             "index":0,
3262             "current":false,
3263             "absolute":false
3264          },
3265          {
3266             "name":"QEMU PS/2 Mouse",
3267             "index":1,
3268             "current":true,
3269             "absolute":true
3270          }
3271       ]
3272    }
3273
3274 EQMP
3275
3276     {
3277         .name       = "query-mice",
3278         .args_type  = "",
3279         .mhandler.cmd_new = qmp_marshal_query_mice,
3280     },
3281
3282 SQMP
3283 query-vnc
3284 ---------
3285
3286 Show VNC server information.
3287
3288 Return a json-object with server information. Connected clients are returned
3289 as a json-array of json-objects.
3290
3291 The main json-object contains the following:
3292
3293 - "enabled": true or false (json-bool)
3294 - "host": server's IP address (json-string)
3295 - "family": address family (json-string)
3296          - Possible values: "ipv4", "ipv6", "unix", "unknown"
3297 - "service": server's port number (json-string)
3298 - "auth": authentication method (json-string)
3299          - Possible values: "invalid", "none", "ra2", "ra2ne", "sasl", "tight",
3300                             "tls", "ultra", "unknown", "vencrypt", "vencrypt",
3301                             "vencrypt+plain", "vencrypt+tls+none",
3302                             "vencrypt+tls+plain", "vencrypt+tls+sasl",
3303                             "vencrypt+tls+vnc", "vencrypt+x509+none",
3304                             "vencrypt+x509+plain", "vencrypt+x509+sasl",
3305                             "vencrypt+x509+vnc", "vnc"
3306 - "clients": a json-array of all connected clients
3307
3308 Clients are described by a json-object, each one contain the following:
3309
3310 - "host": client's IP address (json-string)
3311 - "family": address family (json-string)
3312          - Possible values: "ipv4", "ipv6", "unix", "unknown"
3313 - "service": client's port number (json-string)
3314 - "x509_dname": TLS dname (json-string, optional)
3315 - "sasl_username": SASL username (json-string, optional)
3316
3317 Example:
3318
3319 -> { "execute": "query-vnc" }
3320 <- {
3321       "return":{
3322          "enabled":true,
3323          "host":"0.0.0.0",
3324          "service":"50402",
3325          "auth":"vnc",
3326          "family":"ipv4",
3327          "clients":[
3328             {
3329                "host":"127.0.0.1",
3330                "service":"50401",
3331                "family":"ipv4"
3332             }
3333          ]
3334       }
3335    }
3336
3337 EQMP
3338
3339     {
3340         .name       = "query-vnc",
3341         .args_type  = "",
3342         .mhandler.cmd_new = qmp_marshal_query_vnc,
3343     },
3344     {
3345         .name       = "query-vnc-servers",
3346         .args_type  = "",
3347         .mhandler.cmd_new = qmp_marshal_query_vnc_servers,
3348     },
3349
3350 SQMP
3351 query-spice
3352 -----------
3353
3354 Show SPICE server information.
3355
3356 Return a json-object with server information. Connected clients are returned
3357 as a json-array of json-objects.
3358
3359 The main json-object contains the following:
3360
3361 - "enabled": true or false (json-bool)
3362 - "host": server's IP address (json-string)
3363 - "port": server's port number (json-int, optional)
3364 - "tls-port": server's port number (json-int, optional)
3365 - "auth": authentication method (json-string)
3366          - Possible values: "none", "spice"
3367 - "channels": a json-array of all active channels clients
3368
3369 Channels are described by a json-object, each one contain the following:
3370
3371 - "host": client's IP address (json-string)
3372 - "family": address family (json-string)
3373          - Possible values: "ipv4", "ipv6", "unix", "unknown"
3374 - "port": client's port number (json-string)
3375 - "connection-id": spice connection id.  All channels with the same id
3376                    belong to the same spice session (json-int)
3377 - "channel-type": channel type.  "1" is the main control channel, filter for
3378                   this one if you want track spice sessions only (json-int)
3379 - "channel-id": channel id.  Usually "0", might be different needed when
3380                 multiple channels of the same type exist, such as multiple
3381                 display channels in a multihead setup (json-int)
3382 - "tls": whether the channel is encrypted (json-bool)
3383
3384 Example:
3385
3386 -> { "execute": "query-spice" }
3387 <- {
3388       "return": {
3389          "enabled": true,
3390          "auth": "spice",
3391          "port": 5920,
3392          "tls-port": 5921,
3393          "host": "0.0.0.0",
3394          "channels": [
3395             {
3396                "port": "54924",
3397                "family": "ipv4",
3398                "channel-type": 1,
3399                "connection-id": 1804289383,
3400                "host": "127.0.0.1",
3401                "channel-id": 0,
3402                "tls": true
3403             },
3404             {
3405                "port": "36710",
3406                "family": "ipv4",
3407                "channel-type": 4,
3408                "connection-id": 1804289383,
3409                "host": "127.0.0.1",
3410                "channel-id": 0,
3411                "tls": false
3412             },
3413             [ ... more channels follow ... ]
3414          ]
3415       }
3416    }
3417
3418 EQMP
3419
3420 #if defined(CONFIG_SPICE)
3421     {
3422         .name       = "query-spice",
3423         .args_type  = "",
3424         .mhandler.cmd_new = qmp_marshal_query_spice,
3425     },
3426 #endif
3427
3428 SQMP
3429 query-name
3430 ----------
3431
3432 Show VM name.
3433
3434 Return a json-object with the following information:
3435
3436 - "name": VM's name (json-string, optional)
3437
3438 Example:
3439
3440 -> { "execute": "query-name" }
3441 <- { "return": { "name": "qemu-name" } }
3442
3443 EQMP
3444
3445     {
3446         .name       = "query-name",
3447         .args_type  = "",
3448         .mhandler.cmd_new = qmp_marshal_query_name,
3449     },
3450
3451 SQMP
3452 query-uuid
3453 ----------
3454
3455 Show VM UUID.
3456
3457 Return a json-object with the following information:
3458
3459 - "UUID": Universally Unique Identifier (json-string)
3460
3461 Example:
3462
3463 -> { "execute": "query-uuid" }
3464 <- { "return": { "UUID": "550e8400-e29b-41d4-a716-446655440000" } }
3465
3466 EQMP
3467
3468     {
3469         .name       = "query-uuid",
3470         .args_type  = "",
3471         .mhandler.cmd_new = qmp_marshal_query_uuid,
3472     },
3473
3474 SQMP
3475 query-command-line-options
3476 --------------------------
3477
3478 Show command line option schema.
3479
3480 Return a json-array of command line option schema for all options (or for
3481 the given option), returning an error if the given option doesn't exist.
3482
3483 Each array entry contains the following:
3484
3485 - "option": option name (json-string)
3486 - "parameters": a json-array describes all parameters of the option:
3487     - "name": parameter name (json-string)
3488     - "type": parameter type (one of 'string', 'boolean', 'number',
3489               or 'size')
3490     - "help": human readable description of the parameter
3491               (json-string, optional)
3492     - "default": default value string for the parameter
3493                  (json-string, optional)
3494
3495 Example:
3496
3497 -> { "execute": "query-command-line-options", "arguments": { "option": "option-rom" } }
3498 <- { "return": [
3499         {
3500             "parameters": [
3501                 {
3502                     "name": "romfile",
3503                     "type": "string"
3504                 },
3505                 {
3506                     "name": "bootindex",
3507                     "type": "number"
3508                 }
3509             ],
3510             "option": "option-rom"
3511         }
3512      ]
3513    }
3514
3515 EQMP
3516
3517     {
3518         .name       = "query-command-line-options",
3519         .args_type  = "option:s?",
3520         .mhandler.cmd_new = qmp_marshal_query_command_line_options,
3521     },
3522
3523 SQMP
3524 query-migrate
3525 -------------
3526
3527 Migration status.
3528
3529 Return a json-object. If migration is active there will be another json-object
3530 with RAM migration status and if block migration is active another one with
3531 block migration status.
3532
3533 The main json-object contains the following:
3534
3535 - "status": migration status (json-string)
3536      - Possible values: "setup", "active", "completed", "failed", "cancelled"
3537 - "total-time": total amount of ms since migration started.  If
3538                 migration has ended, it returns the total migration
3539                 time (json-int)
3540 - "setup-time" amount of setup time in milliseconds _before_ the
3541                iterations begin but _after_ the QMP command is issued.
3542                This is designed to provide an accounting of any activities
3543                (such as RDMA pinning) which may be expensive, but do not
3544                actually occur during the iterative migration rounds
3545                themselves. (json-int)
3546 - "downtime": only present when migration has finished correctly
3547               total amount in ms for downtime that happened (json-int)
3548 - "expected-downtime": only present while migration is active
3549                 total amount in ms for downtime that was calculated on
3550                 the last bitmap round (json-int)
3551 - "ram": only present if "status" is "active", it is a json-object with the
3552   following RAM information:
3553          - "transferred": amount transferred in bytes (json-int)
3554          - "remaining": amount remaining to transfer in bytes (json-int)
3555          - "total": total amount of memory in bytes (json-int)
3556          - "duplicate": number of pages filled entirely with the same
3557             byte (json-int)
3558             These are sent over the wire much more efficiently.
3559          - "skipped": number of skipped zero pages (json-int)
3560          - "normal" : number of whole pages transferred.  I.e. they
3561             were not sent as duplicate or xbzrle pages (json-int)
3562          - "normal-bytes" : number of bytes transferred in whole
3563             pages. This is just normal pages times size of one page,
3564             but this way upper levels don't need to care about page
3565             size (json-int)
3566          - "dirty-sync-count": times that dirty ram was synchronized (json-int)
3567 - "disk": only present if "status" is "active" and it is a block migration,
3568   it is a json-object with the following disk information:
3569          - "transferred": amount transferred in bytes (json-int)
3570          - "remaining": amount remaining to transfer in bytes json-int)
3571          - "total": total disk size in bytes (json-int)
3572 - "xbzrle-cache": only present if XBZRLE is active.
3573   It is a json-object with the following XBZRLE information:
3574          - "cache-size": XBZRLE cache size in bytes
3575          - "bytes": number of bytes transferred for XBZRLE compressed pages
3576          - "pages": number of XBZRLE compressed pages
3577          - "cache-miss": number of XBRZRLE page cache misses
3578          - "cache-miss-rate": rate of XBRZRLE page cache misses
3579          - "overflow": number of times XBZRLE overflows.  This means
3580            that the XBZRLE encoding was bigger than just sent the
3581            whole page, and then we sent the whole page instead (as as
3582            normal page).
3583
3584 Examples:
3585
3586 1. Before the first migration
3587
3588 -> { "execute": "query-migrate" }
3589 <- { "return": {} }
3590
3591 2. Migration is done and has succeeded
3592
3593 -> { "execute": "query-migrate" }
3594 <- { "return": {
3595         "status": "completed",
3596         "ram":{
3597           "transferred":123,
3598           "remaining":123,
3599           "total":246,
3600           "total-time":12345,
3601           "setup-time":12345,
3602           "downtime":12345,
3603           "duplicate":123,
3604           "normal":123,
3605           "normal-bytes":123456,
3606           "dirty-sync-count":15
3607         }
3608      }
3609    }
3610
3611 3. Migration is done and has failed
3612
3613 -> { "execute": "query-migrate" }
3614 <- { "return": { "status": "failed" } }
3615
3616 4. Migration is being performed and is not a block migration:
3617
3618 -> { "execute": "query-migrate" }
3619 <- {
3620       "return":{
3621          "status":"active",
3622          "ram":{
3623             "transferred":123,
3624             "remaining":123,
3625             "total":246,
3626             "total-time":12345,
3627             "setup-time":12345,
3628             "expected-downtime":12345,
3629             "duplicate":123,
3630             "normal":123,
3631             "normal-bytes":123456,
3632             "dirty-sync-count":15
3633          }
3634       }
3635    }
3636
3637 5. Migration is being performed and is a block migration:
3638
3639 -> { "execute": "query-migrate" }
3640 <- {
3641       "return":{
3642          "status":"active",
3643          "ram":{
3644             "total":1057024,
3645             "remaining":1053304,
3646             "transferred":3720,
3647             "total-time":12345,
3648             "setup-time":12345,
3649             "expected-downtime":12345,
3650             "duplicate":123,
3651             "normal":123,
3652             "normal-bytes":123456,
3653             "dirty-sync-count":15
3654          },
3655          "disk":{
3656             "total":20971520,
3657             "remaining":20880384,
3658             "transferred":91136
3659          }
3660       }
3661    }
3662
3663 6. Migration is being performed and XBZRLE is active:
3664
3665 -> { "execute": "query-migrate" }
3666 <- {
3667       "return":{
3668          "status":"active",
3669          "capabilities" : [ { "capability": "xbzrle", "state" : true } ],
3670          "ram":{
3671             "total":1057024,
3672             "remaining":1053304,
3673             "transferred":3720,
3674             "total-time":12345,
3675             "setup-time":12345,
3676             "expected-downtime":12345,
3677             "duplicate":10,
3678             "normal":3333,
3679             "normal-bytes":3412992,
3680             "dirty-sync-count":15
3681          },
3682          "xbzrle-cache":{
3683             "cache-size":67108864,
3684             "bytes":20971520,
3685             "pages":2444343,
3686             "cache-miss":2244,
3687             "cache-miss-rate":0.123,
3688             "overflow":34434
3689          }
3690       }
3691    }
3692
3693 EQMP
3694
3695     {
3696         .name       = "query-migrate",
3697         .args_type  = "",
3698         .mhandler.cmd_new = qmp_marshal_query_migrate,
3699     },
3700
3701 SQMP
3702 migrate-set-capabilities
3703 ------------------------
3704
3705 Enable/Disable migration capabilities
3706
3707 - "xbzrle": XBZRLE support
3708 - "rdma-pin-all": pin all pages when using RDMA during migration
3709 - "auto-converge": throttle down guest to help convergence of migration
3710 - "zero-blocks": compress zero blocks during block migration
3711 - "compress": use multiple compression threads to accelerate live migration
3712 - "events": generate events for each migration state change
3713 - "postcopy-ram": postcopy mode for live migration
3714
3715 Arguments:
3716
3717 Example:
3718
3719 -> { "execute": "migrate-set-capabilities" , "arguments":
3720      { "capabilities": [ { "capability": "xbzrle", "state": true } ] } }
3721
3722 EQMP
3723
3724     {
3725         .name       = "migrate-set-capabilities",
3726         .args_type  = "capabilities:q",
3727         .params     = "capability:s,state:b",
3728         .mhandler.cmd_new = qmp_marshal_migrate_set_capabilities,
3729     },
3730 SQMP
3731 query-migrate-capabilities
3732 --------------------------
3733
3734 Query current migration capabilities
3735
3736 - "capabilities": migration capabilities state
3737          - "xbzrle" : XBZRLE state (json-bool)
3738          - "rdma-pin-all" : RDMA Pin Page state (json-bool)
3739          - "auto-converge" : Auto Converge state (json-bool)
3740          - "zero-blocks" : Zero Blocks state (json-bool)
3741          - "compress": Multiple compression threads state (json-bool)
3742          - "events": Migration state change event state (json-bool)
3743          - "postcopy-ram": postcopy ram state (json-bool)
3744
3745 Arguments:
3746
3747 Example:
3748
3749 -> { "execute": "query-migrate-capabilities" }
3750 <- {"return": [
3751      {"state": false, "capability": "xbzrle"},
3752      {"state": false, "capability": "rdma-pin-all"},
3753      {"state": false, "capability": "auto-converge"},
3754      {"state": false, "capability": "zero-blocks"},
3755      {"state": false, "capability": "compress"},
3756      {"state": true, "capability": "events"},
3757      {"state": false, "capability": "postcopy-ram"}
3758    ]}
3759
3760 EQMP
3761
3762     {
3763         .name       = "query-migrate-capabilities",
3764         .args_type  = "",
3765         .mhandler.cmd_new = qmp_marshal_query_migrate_capabilities,
3766     },
3767
3768 SQMP
3769 migrate-set-parameters
3770 ----------------------
3771
3772 Set migration parameters
3773
3774 - "compress-level": set compression level during migration (json-int)
3775 - "compress-threads": set compression thread count for migration (json-int)
3776 - "decompress-threads": set decompression thread count for migration (json-int)
3777 - "cpu-throttle-initial": set initial percentage of time guest cpus are
3778                           throttled for auto-converge (json-int)
3779 - "cpu-throttle-increment": set throttle increasing percentage for
3780                             auto-converge (json-int)
3781
3782 Arguments:
3783
3784 Example:
3785
3786 -> { "execute": "migrate-set-parameters" , "arguments":
3787       { "compress-level": 1 } }
3788
3789 EQMP
3790
3791     {
3792         .name       = "migrate-set-parameters",
3793         .args_type  =
3794             "compress-level:i?,compress-threads:i?,decompress-threads:i?,cpu-throttle-initial:i?,cpu-throttle-increment:i?",
3795         .mhandler.cmd_new = qmp_marshal_migrate_set_parameters,
3796     },
3797 SQMP
3798 query-migrate-parameters
3799 ------------------------
3800
3801 Query current migration parameters
3802
3803 - "parameters": migration parameters value
3804          - "compress-level" : compression level value (json-int)
3805          - "compress-threads" : compression thread count value (json-int)
3806          - "decompress-threads" : decompression thread count value (json-int)
3807          - "cpu-throttle-initial" : initial percentage of time guest cpus are
3808                                     throttled (json-int)
3809          - "cpu-throttle-increment" : throttle increasing percentage for
3810                                       auto-converge (json-int)
3811
3812 Arguments:
3813
3814 Example:
3815
3816 -> { "execute": "query-migrate-parameters" }
3817 <- {
3818       "return": {
3819          "decompress-threads": 2,
3820          "cpu-throttle-increment": 10,
3821          "compress-threads": 8,
3822          "compress-level": 1,
3823          "cpu-throttle-initial": 20
3824       }
3825    }
3826
3827 EQMP
3828
3829     {
3830         .name       = "query-migrate-parameters",
3831         .args_type  = "",
3832         .mhandler.cmd_new = qmp_marshal_query_migrate_parameters,
3833     },
3834
3835 SQMP
3836 query-balloon
3837 -------------
3838
3839 Show balloon information.
3840
3841 Make an asynchronous request for balloon info. When the request completes a
3842 json-object will be returned containing the following data:
3843
3844 - "actual": current balloon value in bytes (json-int)
3845
3846 Example:
3847
3848 -> { "execute": "query-balloon" }
3849 <- {
3850       "return":{
3851          "actual":1073741824,
3852       }
3853    }
3854
3855 EQMP
3856
3857     {
3858         .name       = "query-balloon",
3859         .args_type  = "",
3860         .mhandler.cmd_new = qmp_marshal_query_balloon,
3861     },
3862
3863     {
3864         .name       = "query-block-jobs",
3865         .args_type  = "",
3866         .mhandler.cmd_new = qmp_marshal_query_block_jobs,
3867     },
3868
3869     {
3870         .name       = "qom-list",
3871         .args_type  = "path:s",
3872         .mhandler.cmd_new = qmp_marshal_qom_list,
3873     },
3874
3875     {
3876         .name       = "qom-set",
3877         .args_type  = "path:s,property:s,value:q",
3878         .mhandler.cmd_new = qmp_marshal_qom_set,
3879     },
3880
3881     {
3882         .name       = "qom-get",
3883         .args_type  = "path:s,property:s",
3884         .mhandler.cmd_new = qmp_marshal_qom_get,
3885     },
3886
3887     {
3888         .name       = "nbd-server-start",
3889         .args_type  = "addr:q,tls-creds:s?",
3890         .mhandler.cmd_new = qmp_marshal_nbd_server_start,
3891     },
3892     {
3893         .name       = "nbd-server-add",
3894         .args_type  = "device:B,writable:b?",
3895         .mhandler.cmd_new = qmp_marshal_nbd_server_add,
3896     },
3897     {
3898         .name       = "nbd-server-stop",
3899         .args_type  = "",
3900         .mhandler.cmd_new = qmp_marshal_nbd_server_stop,
3901     },
3902
3903     {
3904         .name       = "change-vnc-password",
3905         .args_type  = "password:s",
3906         .mhandler.cmd_new = qmp_marshal_change_vnc_password,
3907     },
3908     {
3909         .name       = "qom-list-types",
3910         .args_type  = "implements:s?,abstract:b?",
3911         .mhandler.cmd_new = qmp_marshal_qom_list_types,
3912     },
3913
3914     {
3915         .name       = "device-list-properties",
3916         .args_type  = "typename:s",
3917         .mhandler.cmd_new = qmp_marshal_device_list_properties,
3918     },
3919
3920     {
3921         .name       = "query-machines",
3922         .args_type  = "",
3923         .mhandler.cmd_new = qmp_marshal_query_machines,
3924     },
3925
3926     {
3927         .name       = "query-cpu-definitions",
3928         .args_type  = "",
3929         .mhandler.cmd_new = qmp_marshal_query_cpu_definitions,
3930     },
3931
3932     {
3933         .name       = "query-target",
3934         .args_type  = "",
3935         .mhandler.cmd_new = qmp_marshal_query_target,
3936     },
3937
3938     {
3939         .name       = "query-tpm",
3940         .args_type  = "",
3941         .mhandler.cmd_new = qmp_marshal_query_tpm,
3942     },
3943
3944 SQMP
3945 query-tpm
3946 ---------
3947
3948 Return information about the TPM device.
3949
3950 Arguments: None
3951
3952 Example:
3953
3954 -> { "execute": "query-tpm" }
3955 <- { "return":
3956      [
3957        { "model": "tpm-tis",
3958          "options":
3959            { "type": "passthrough",
3960              "data":
3961                { "cancel-path": "/sys/class/misc/tpm0/device/cancel",
3962                  "path": "/dev/tpm0"
3963                }
3964            },
3965          "id": "tpm0"
3966        }
3967      ]
3968    }
3969
3970 EQMP
3971
3972     {
3973         .name       = "query-tpm-models",
3974         .args_type  = "",
3975         .mhandler.cmd_new = qmp_marshal_query_tpm_models,
3976     },
3977
3978 SQMP
3979 query-tpm-models
3980 ----------------
3981
3982 Return a list of supported TPM models.
3983
3984 Arguments: None
3985
3986 Example:
3987
3988 -> { "execute": "query-tpm-models" }
3989 <- { "return": [ "tpm-tis" ] }
3990
3991 EQMP
3992
3993     {
3994         .name       = "query-tpm-types",
3995         .args_type  = "",
3996         .mhandler.cmd_new = qmp_marshal_query_tpm_types,
3997     },
3998
3999 SQMP
4000 query-tpm-types
4001 ---------------
4002
4003 Return a list of supported TPM types.
4004
4005 Arguments: None
4006
4007 Example:
4008
4009 -> { "execute": "query-tpm-types" }
4010 <- { "return": [ "passthrough" ] }
4011
4012 EQMP
4013
4014     {
4015         .name       = "chardev-add",
4016         .args_type  = "id:s,backend:q",
4017         .mhandler.cmd_new = qmp_marshal_chardev_add,
4018     },
4019
4020 SQMP
4021 chardev-add
4022 ----------------
4023
4024 Add a chardev.
4025
4026 Arguments:
4027
4028 - "id": the chardev's ID, must be unique (json-string)
4029 - "backend": chardev backend type + parameters
4030
4031 Examples:
4032
4033 -> { "execute" : "chardev-add",
4034      "arguments" : { "id" : "foo",
4035                      "backend" : { "type" : "null", "data" : {} } } }
4036 <- { "return": {} }
4037
4038 -> { "execute" : "chardev-add",
4039      "arguments" : { "id" : "bar",
4040                      "backend" : { "type" : "file",
4041                                    "data" : { "out" : "/tmp/bar.log" } } } }
4042 <- { "return": {} }
4043
4044 -> { "execute" : "chardev-add",
4045      "arguments" : { "id" : "baz",
4046                      "backend" : { "type" : "pty", "data" : {} } } }
4047 <- { "return": { "pty" : "/dev/pty/42" } }
4048
4049 EQMP
4050
4051     {
4052         .name       = "chardev-remove",
4053         .args_type  = "id:s",
4054         .mhandler.cmd_new = qmp_marshal_chardev_remove,
4055     },
4056
4057
4058 SQMP
4059 chardev-remove
4060 --------------
4061
4062 Remove a chardev.
4063
4064 Arguments:
4065
4066 - "id": the chardev's ID, must exist and not be in use (json-string)
4067
4068 Example:
4069
4070 -> { "execute": "chardev-remove", "arguments": { "id" : "foo" } }
4071 <- { "return": {} }
4072
4073 EQMP
4074     {
4075         .name       = "query-rx-filter",
4076         .args_type  = "name:s?",
4077         .mhandler.cmd_new = qmp_marshal_query_rx_filter,
4078     },
4079
4080 SQMP
4081 query-rx-filter
4082 ---------------
4083
4084 Show rx-filter information.
4085
4086 Returns a json-array of rx-filter information for all NICs (or for the
4087 given NIC), returning an error if the given NIC doesn't exist, or
4088 given NIC doesn't support rx-filter querying, or given net client
4089 isn't a NIC.
4090
4091 The query will clear the event notification flag of each NIC, then qemu
4092 will start to emit event to QMP monitor.
4093
4094 Each array entry contains the following:
4095
4096 - "name": net client name (json-string)
4097 - "promiscuous": promiscuous mode is enabled (json-bool)
4098 - "multicast": multicast receive state (one of 'normal', 'none', 'all')
4099 - "unicast": unicast receive state  (one of 'normal', 'none', 'all')
4100 - "vlan": vlan receive state (one of 'normal', 'none', 'all') (Since 2.0)
4101 - "broadcast-allowed": allow to receive broadcast (json-bool)
4102 - "multicast-overflow": multicast table is overflowed (json-bool)
4103 - "unicast-overflow": unicast table is overflowed (json-bool)
4104 - "main-mac": main macaddr string (json-string)
4105 - "vlan-table": a json-array of active vlan id
4106 - "unicast-table": a json-array of unicast macaddr string
4107 - "multicast-table": a json-array of multicast macaddr string
4108
4109 Example:
4110
4111 -> { "execute": "query-rx-filter", "arguments": { "name": "vnet0" } }
4112 <- { "return": [
4113         {
4114             "promiscuous": true,
4115             "name": "vnet0",
4116             "main-mac": "52:54:00:12:34:56",
4117             "unicast": "normal",
4118             "vlan": "normal",
4119             "vlan-table": [
4120                 4,
4121                 0
4122             ],
4123             "unicast-table": [
4124             ],
4125             "multicast": "normal",
4126             "multicast-overflow": false,
4127             "unicast-overflow": false,
4128             "multicast-table": [
4129                 "01:00:5e:00:00:01",
4130                 "33:33:00:00:00:01",
4131                 "33:33:ff:12:34:56"
4132             ],
4133             "broadcast-allowed": false
4134         }
4135       ]
4136    }
4137
4138 EQMP
4139
4140     {
4141         .name       = "blockdev-add",
4142         .args_type  = "options:q",
4143         .mhandler.cmd_new = qmp_marshal_blockdev_add,
4144     },
4145
4146 SQMP
4147 blockdev-add
4148 ------------
4149
4150 Add a block device.
4151
4152 This command is still a work in progress.  It doesn't support all
4153 block drivers among other things.  Stay away from it unless you want
4154 to help with its development.
4155
4156 Arguments:
4157
4158 - "options": block driver options
4159
4160 Example (1):
4161
4162 -> { "execute": "blockdev-add",
4163     "arguments": { "options" : { "driver": "qcow2",
4164                                  "file": { "driver": "file",
4165                                            "filename": "test.qcow2" } } } }
4166 <- { "return": {} }
4167
4168 Example (2):
4169
4170 -> { "execute": "blockdev-add",
4171      "arguments": {
4172          "options": {
4173            "driver": "qcow2",
4174            "id": "my_disk",
4175            "discard": "unmap",
4176            "cache": {
4177                "direct": true,
4178                "writeback": true
4179            },
4180            "file": {
4181                "driver": "file",
4182                "filename": "/tmp/test.qcow2"
4183            },
4184            "backing": {
4185                "driver": "raw",
4186                "file": {
4187                    "driver": "file",
4188                    "filename": "/dev/fdset/4"
4189                }
4190            }
4191          }
4192        }
4193      }
4194
4195 <- { "return": {} }
4196
4197 EQMP
4198
4199     {
4200         .name       = "x-blockdev-del",
4201         .args_type  = "id:s?,node-name:s?",
4202         .mhandler.cmd_new = qmp_marshal_x_blockdev_del,
4203     },
4204
4205 SQMP
4206 x-blockdev-del
4207 ------------
4208 Since 2.5
4209
4210 Deletes a block device thas has been added using blockdev-add.
4211 The selected device can be either a block backend or a graph node.
4212
4213 In the former case the backend will be destroyed, along with its
4214 inserted medium if there's any. The command will fail if the backend
4215 or its medium are in use.
4216
4217 In the latter case the node will be destroyed. The command will fail
4218 if the node is attached to a block backend or is otherwise being
4219 used.
4220
4221 One of "id" or "node-name" must be specified, but not both.
4222
4223 This command is still a work in progress and is considered
4224 experimental. Stay away from it unless you want to help with its
4225 development.
4226
4227 Arguments:
4228
4229 - "id": Name of the block backend device to delete (json-string, optional)
4230 - "node-name": Name of the graph node to delete (json-string, optional)
4231
4232 Example:
4233
4234 -> { "execute": "blockdev-add",
4235      "arguments": {
4236          "options": {
4237              "driver": "qcow2",
4238              "id": "drive0",
4239              "file": {
4240                  "driver": "file",
4241                  "filename": "test.qcow2"
4242              }
4243          }
4244      }
4245    }
4246
4247 <- { "return": {} }
4248
4249 -> { "execute": "x-blockdev-del",
4250      "arguments": { "id": "drive0" }
4251    }
4252 <- { "return": {} }
4253
4254 EQMP
4255
4256     {
4257         .name       = "blockdev-open-tray",
4258         .args_type  = "device:s,force:b?",
4259         .mhandler.cmd_new = qmp_marshal_blockdev_open_tray,
4260     },
4261
4262 SQMP
4263 blockdev-open-tray
4264 ------------------
4265
4266 Opens a block device's tray. If there is a block driver state tree inserted as a
4267 medium, it will become inaccessible to the guest (but it will remain associated
4268 to the block device, so closing the tray will make it accessible again).
4269
4270 If the tray was already open before, this will be a no-op.
4271
4272 Once the tray opens, a DEVICE_TRAY_MOVED event is emitted. There are cases in
4273 which no such event will be generated, these include:
4274 - if the guest has locked the tray, @force is false and the guest does not
4275   respond to the eject request
4276 - if the BlockBackend denoted by @device does not have a guest device attached
4277   to it
4278 - if the guest device does not have an actual tray and is empty, for instance
4279   for floppy disk drives
4280
4281 Arguments:
4282
4283 - "device": block device name (json-string)
4284 - "force": if false (the default), an eject request will be sent to the guest if
4285            it has locked the tray (and the tray will not be opened immediately);
4286            if true, the tray will be opened regardless of whether it is locked
4287            (json-bool, optional)
4288
4289 Example:
4290
4291 -> { "execute": "blockdev-open-tray",
4292      "arguments": { "device": "ide1-cd0" } }
4293
4294 <- { "timestamp": { "seconds": 1418751016,
4295                     "microseconds": 716996 },
4296      "event": "DEVICE_TRAY_MOVED",
4297      "data": { "device": "ide1-cd0",
4298                "tray-open": true } }
4299
4300 <- { "return": {} }
4301
4302 EQMP
4303
4304     {
4305         .name       = "blockdev-close-tray",
4306         .args_type  = "device:s",
4307         .mhandler.cmd_new = qmp_marshal_blockdev_close_tray,
4308     },
4309
4310 SQMP
4311 blockdev-close-tray
4312 -------------------
4313
4314 Closes a block device's tray. If there is a block driver state tree associated
4315 with the block device (which is currently ejected), that tree will be loaded as
4316 the medium.
4317
4318 If the tray was already closed before, this will be a no-op.
4319
4320 Arguments:
4321
4322 - "device": block device name (json-string)
4323
4324 Example:
4325
4326 -> { "execute": "blockdev-close-tray",
4327      "arguments": { "device": "ide1-cd0" } }
4328
4329 <- { "timestamp": { "seconds": 1418751345,
4330                     "microseconds": 272147 },
4331      "event": "DEVICE_TRAY_MOVED",
4332      "data": { "device": "ide1-cd0",
4333                "tray-open": false } }
4334
4335 <- { "return": {} }
4336
4337 EQMP
4338
4339     {
4340         .name       = "x-blockdev-remove-medium",
4341         .args_type  = "device:s",
4342         .mhandler.cmd_new = qmp_marshal_x_blockdev_remove_medium,
4343     },
4344
4345 SQMP
4346 x-blockdev-remove-medium
4347 ------------------------
4348
4349 Removes a medium (a block driver state tree) from a block device. That block
4350 device's tray must currently be open (unless there is no attached guest device).
4351
4352 If the tray is open and there is no medium inserted, this will be a no-op.
4353
4354 This command is still a work in progress and is considered experimental.
4355 Stay away from it unless you want to help with its development.
4356
4357 Arguments:
4358
4359 - "device": block device name (json-string)
4360
4361 Example:
4362
4363 -> { "execute": "x-blockdev-remove-medium",
4364      "arguments": { "device": "ide1-cd0" } }
4365
4366 <- { "error": { "class": "GenericError",
4367                 "desc": "Tray of device 'ide1-cd0' is not open" } }
4368
4369 -> { "execute": "blockdev-open-tray",
4370      "arguments": { "device": "ide1-cd0" } }
4371
4372 <- { "timestamp": { "seconds": 1418751627,
4373                     "microseconds": 549958 },
4374      "event": "DEVICE_TRAY_MOVED",
4375      "data": { "device": "ide1-cd0",
4376                "tray-open": true } }
4377
4378 <- { "return": {} }
4379
4380 -> { "execute": "x-blockdev-remove-medium",
4381      "arguments": { "device": "ide1-cd0" } }
4382
4383 <- { "return": {} }
4384
4385 EQMP
4386
4387     {
4388         .name       = "x-blockdev-insert-medium",
4389         .args_type  = "device:s,node-name:s",
4390         .mhandler.cmd_new = qmp_marshal_x_blockdev_insert_medium,
4391     },
4392
4393 SQMP
4394 x-blockdev-insert-medium
4395 ------------------------
4396
4397 Inserts a medium (a block driver state tree) into a block device. That block
4398 device's tray must currently be open (unless there is no attached guest device)
4399 and there must be no medium inserted already.
4400
4401 This command is still a work in progress and is considered experimental.
4402 Stay away from it unless you want to help with its development.
4403
4404 Arguments:
4405
4406 - "device": block device name (json-string)
4407 - "node-name": root node of the BDS tree to insert into the block device
4408
4409 Example:
4410
4411 -> { "execute": "blockdev-add",
4412      "arguments": { "options": { "node-name": "node0",
4413                                  "driver": "raw",
4414                                  "file": { "driver": "file",
4415                                            "filename": "fedora.iso" } } } }
4416
4417 <- { "return": {} }
4418
4419 -> { "execute": "x-blockdev-insert-medium",
4420      "arguments": { "device": "ide1-cd0",
4421                     "node-name": "node0" } }
4422
4423 <- { "return": {} }
4424
4425 EQMP
4426
4427     {
4428         .name       = "x-blockdev-change",
4429         .args_type  = "parent:B,child:B?,node:B?",
4430         .mhandler.cmd_new = qmp_marshal_x_blockdev_change,
4431     },
4432
4433 SQMP
4434 x-blockdev-change
4435 -----------------
4436
4437 Dynamically reconfigure the block driver state graph. It can be used
4438 to add, remove, insert or replace a graph node. Currently only the
4439 Quorum driver implements this feature to add or remove its child. This
4440 is useful to fix a broken quorum child.
4441
4442 If @node is specified, it will be inserted under @parent. @child
4443 may not be specified in this case. If both @parent and @child are
4444 specified but @node is not, @child will be detached from @parent.
4445
4446 Arguments:
4447 - "parent": the id or name of the parent node (json-string)
4448 - "child": the name of a child under the given parent node (json-string, optional)
4449 - "node": the name of the node that will be added (json-string, optional)
4450
4451 Note: this command is experimental, and not a stable API. It doesn't
4452 support all kinds of operations, all kinds of children, nor all block
4453 drivers.
4454
4455 Warning: The data in a new quorum child MUST be consistent with that of
4456 the rest of the array.
4457
4458 Example:
4459
4460 Add a new node to a quorum
4461 -> { "execute": "blockdev-add",
4462      "arguments": { "options": { "driver": "raw",
4463                                  "node-name": "new_node",
4464                                  "file": { "driver": "file",
4465                                            "filename": "test.raw" } } } }
4466 <- { "return": {} }
4467 -> { "execute": "x-blockdev-change",
4468      "arguments": { "parent": "disk1",
4469                     "node": "new_node" } }
4470 <- { "return": {} }
4471
4472 Delete a quorum's node
4473 -> { "execute": "x-blockdev-change",
4474      "arguments": { "parent": "disk1",
4475                     "child": "children.1" } }
4476 <- { "return": {} }
4477
4478 EQMP
4479
4480     {
4481         .name       = "query-named-block-nodes",
4482         .args_type  = "",
4483         .mhandler.cmd_new = qmp_marshal_query_named_block_nodes,
4484     },
4485
4486 SQMP
4487 @query-named-block-nodes
4488 ------------------------
4489
4490 Return a list of BlockDeviceInfo for all the named block driver nodes
4491
4492 Example:
4493
4494 -> { "execute": "query-named-block-nodes" }
4495 <- { "return": [ { "ro":false,
4496                    "drv":"qcow2",
4497                    "encrypted":false,
4498                    "file":"disks/test.qcow2",
4499                    "node-name": "my-node",
4500                    "backing_file_depth":1,
4501                    "bps":1000000,
4502                    "bps_rd":0,
4503                    "bps_wr":0,
4504                    "iops":1000000,
4505                    "iops_rd":0,
4506                    "iops_wr":0,
4507                    "bps_max": 8000000,
4508                    "bps_rd_max": 0,
4509                    "bps_wr_max": 0,
4510                    "iops_max": 0,
4511                    "iops_rd_max": 0,
4512                    "iops_wr_max": 0,
4513                    "iops_size": 0,
4514                    "write_threshold": 0,
4515                    "image":{
4516                       "filename":"disks/test.qcow2",
4517                       "format":"qcow2",
4518                       "virtual-size":2048000,
4519                       "backing_file":"base.qcow2",
4520                       "full-backing-filename":"disks/base.qcow2",
4521                       "backing-filename-format":"qcow2",
4522                       "snapshots":[
4523                          {
4524                             "id": "1",
4525                             "name": "snapshot1",
4526                             "vm-state-size": 0,
4527                             "date-sec": 10000200,
4528                             "date-nsec": 12,
4529                             "vm-clock-sec": 206,
4530                             "vm-clock-nsec": 30
4531                          }
4532                       ],
4533                       "backing-image":{
4534                           "filename":"disks/base.qcow2",
4535                           "format":"qcow2",
4536                           "virtual-size":2048000
4537                       }
4538                    } } ] }
4539
4540 EQMP
4541
4542     {
4543         .name       = "blockdev-change-medium",
4544         .args_type  = "device:B,filename:F,format:s?,read-only-mode:s?",
4545         .mhandler.cmd_new = qmp_marshal_blockdev_change_medium,
4546     },
4547
4548 SQMP
4549 blockdev-change-medium
4550 ----------------------
4551
4552 Changes the medium inserted into a block device by ejecting the current medium
4553 and loading a new image file which is inserted as the new medium.
4554
4555 Arguments:
4556
4557 - "device": device name (json-string)
4558 - "filename": filename of the new image (json-string)
4559 - "format": format of the new image (json-string, optional)
4560 - "read-only-mode": new read-only mode (json-string, optional)
4561           - Possible values: "retain" (default), "read-only", "read-write"
4562
4563 Examples:
4564
4565 1. Change a removable medium
4566
4567 -> { "execute": "blockdev-change-medium",
4568              "arguments": { "device": "ide1-cd0",
4569                             "filename": "/srv/images/Fedora-12-x86_64-DVD.iso",
4570                             "format": "raw" } }
4571 <- { "return": {} }
4572
4573 2. Load a read-only medium into a writable drive
4574
4575 -> { "execute": "blockdev-change-medium",
4576              "arguments": { "device": "isa-fd0",
4577                             "filename": "/srv/images/ro.img",
4578                             "format": "raw",
4579                             "read-only-mode": "retain" } }
4580
4581 <- { "error":
4582      { "class": "GenericError",
4583        "desc": "Could not open '/srv/images/ro.img': Permission denied" } }
4584
4585 -> { "execute": "blockdev-change-medium",
4586              "arguments": { "device": "isa-fd0",
4587                             "filename": "/srv/images/ro.img",
4588                             "format": "raw",
4589                             "read-only-mode": "read-only" } }
4590
4591 <- { "return": {} }
4592
4593 EQMP
4594
4595     {
4596         .name       = "query-memdev",
4597         .args_type  = "",
4598         .mhandler.cmd_new = qmp_marshal_query_memdev,
4599     },
4600
4601 SQMP
4602 query-memdev
4603 ------------
4604
4605 Show memory devices information.
4606
4607
4608 Example (1):
4609
4610 -> { "execute": "query-memdev" }
4611 <- { "return": [
4612        {
4613          "size": 536870912,
4614          "merge": false,
4615          "dump": true,
4616          "prealloc": false,
4617          "host-nodes": [0, 1],
4618          "policy": "bind"
4619        },
4620        {
4621          "size": 536870912,
4622          "merge": false,
4623          "dump": true,
4624          "prealloc": true,
4625          "host-nodes": [2, 3],
4626          "policy": "preferred"
4627        }
4628      ]
4629    }
4630
4631 EQMP
4632
4633     {
4634         .name       = "query-memory-devices",
4635         .args_type  = "",
4636         .mhandler.cmd_new = qmp_marshal_query_memory_devices,
4637     },
4638
4639 SQMP
4640 @query-memory-devices
4641 --------------------
4642
4643 Return a list of memory devices.
4644
4645 Example:
4646 -> { "execute": "query-memory-devices" }
4647 <- { "return": [ { "data":
4648                       { "addr": 5368709120,
4649                         "hotpluggable": true,
4650                         "hotplugged": true,
4651                         "id": "d1",
4652                         "memdev": "/objects/memX",
4653                         "node": 0,
4654                         "size": 1073741824,
4655                         "slot": 0},
4656                    "type": "dimm"
4657                  } ] }
4658 EQMP
4659
4660     {
4661         .name       = "query-acpi-ospm-status",
4662         .args_type  = "",
4663         .mhandler.cmd_new = qmp_marshal_query_acpi_ospm_status,
4664     },
4665
4666 SQMP
4667 @query-acpi-ospm-status
4668 --------------------
4669
4670 Return list of ACPIOSTInfo for devices that support status reporting
4671 via ACPI _OST method.
4672
4673 Example:
4674 -> { "execute": "query-acpi-ospm-status" }
4675 <- { "return": [ { "device": "d1", "slot": "0", "slot-type": "DIMM", "source": 1, "status": 0},
4676                  { "slot": "1", "slot-type": "DIMM", "source": 0, "status": 0},
4677                  { "slot": "2", "slot-type": "DIMM", "source": 0, "status": 0},
4678                  { "slot": "3", "slot-type": "DIMM", "source": 0, "status": 0}
4679    ]}
4680 EQMP
4681
4682 #if defined TARGET_I386
4683     {
4684         .name       = "rtc-reset-reinjection",
4685         .args_type  = "",
4686         .mhandler.cmd_new = qmp_marshal_rtc_reset_reinjection,
4687     },
4688 #endif
4689
4690 SQMP
4691 rtc-reset-reinjection
4692 ---------------------
4693
4694 Reset the RTC interrupt reinjection backlog.
4695
4696 Arguments: None.
4697
4698 Example:
4699
4700 -> { "execute": "rtc-reset-reinjection" }
4701 <- { "return": {} }
4702 EQMP
4703
4704     {
4705         .name       = "trace-event-get-state",
4706         .args_type  = "name:s",
4707         .mhandler.cmd_new = qmp_marshal_trace_event_get_state,
4708     },
4709
4710 SQMP
4711 trace-event-get-state
4712 ---------------------
4713
4714 Query the state of events.
4715
4716 Example:
4717
4718 -> { "execute": "trace-event-get-state", "arguments": { "name": "qemu_memalign" } }
4719 <- { "return": [ { "name": "qemu_memalign", "state": "disabled" } ] }
4720 EQMP
4721
4722     {
4723         .name       = "trace-event-set-state",
4724         .args_type  = "name:s,enable:b,ignore-unavailable:b?",
4725         .mhandler.cmd_new = qmp_marshal_trace_event_set_state,
4726     },
4727
4728 SQMP
4729 trace-event-set-state
4730 ---------------------
4731
4732 Set the state of events.
4733
4734 Example:
4735
4736 -> { "execute": "trace-event-set-state", "arguments": { "name": "qemu_memalign", "enable": "true" } }
4737 <- { "return": {} }
4738 EQMP
4739
4740     {
4741         .name       = "input-send-event",
4742         .args_type  = "console:i?,events:q",
4743         .mhandler.cmd_new = qmp_marshal_input_send_event,
4744     },
4745
4746 SQMP
4747 @input-send-event
4748 -----------------
4749
4750 Send input event to guest.
4751
4752 Arguments:
4753
4754 - "device": display device (json-string, optional)
4755 - "head": display head (json-int, optional)
4756 - "events": list of input events
4757
4758 The consoles are visible in the qom tree, under
4759 /backend/console[$index]. They have a device link and head property, so
4760 it is possible to map which console belongs to which device and display.
4761
4762 Note: this command is experimental, and not a stable API.
4763
4764 Example (1):
4765
4766 Press left mouse button.
4767
4768 -> { "execute": "input-send-event",
4769     "arguments": { "device": "video0",
4770                    "events": [ { "type": "btn",
4771                    "data" : { "down": true, "button": "left" } } ] } }
4772 <- { "return": {} }
4773
4774 -> { "execute": "input-send-event",
4775     "arguments": { "device": "video0",
4776                    "events": [ { "type": "btn",
4777                    "data" : { "down": false, "button": "left" } } ] } }
4778 <- { "return": {} }
4779
4780 Example (2):
4781
4782 Press ctrl-alt-del.
4783
4784 -> { "execute": "input-send-event",
4785      "arguments": { "events": [
4786         { "type": "key", "data" : { "down": true,
4787           "key": {"type": "qcode", "data": "ctrl" } } },
4788         { "type": "key", "data" : { "down": true,
4789           "key": {"type": "qcode", "data": "alt" } } },
4790         { "type": "key", "data" : { "down": true,
4791           "key": {"type": "qcode", "data": "delete" } } } ] } }
4792 <- { "return": {} }
4793
4794 Example (3):
4795
4796 Move mouse pointer to absolute coordinates (20000, 400).
4797
4798 -> { "execute": "input-send-event" ,
4799   "arguments": { "events": [
4800                { "type": "abs", "data" : { "axis": "x", "value" : 20000 } },
4801                { "type": "abs", "data" : { "axis": "y", "value" : 400 } } ] } }
4802 <- { "return": {} }
4803
4804 EQMP
4805
4806     {
4807         .name       = "block-set-write-threshold",
4808         .args_type  = "node-name:s,write-threshold:l",
4809         .mhandler.cmd_new = qmp_marshal_block_set_write_threshold,
4810     },
4811
4812 SQMP
4813 block-set-write-threshold
4814 ------------
4815
4816 Change the write threshold for a block drive. The threshold is an offset,
4817 thus must be non-negative. Default is no write threshold.
4818 Setting the threshold to zero disables it.
4819
4820 Arguments:
4821
4822 - "node-name": the node name in the block driver state graph (json-string)
4823 - "write-threshold": the write threshold in bytes (json-int)
4824
4825 Example:
4826
4827 -> { "execute": "block-set-write-threshold",
4828   "arguments": { "node-name": "mydev",
4829                  "write-threshold": 17179869184 } }
4830 <- { "return": {} }
4831
4832 EQMP
4833
4834     {
4835         .name       = "query-rocker",
4836         .args_type  = "name:s",
4837         .mhandler.cmd_new = qmp_marshal_query_rocker,
4838     },
4839
4840 SQMP
4841 Show rocker switch
4842 ------------------
4843
4844 Arguments:
4845
4846 - "name": switch name
4847
4848 Example:
4849
4850 -> { "execute": "query-rocker", "arguments": { "name": "sw1" } }
4851 <- { "return": {"name": "sw1", "ports": 2, "id": 1327446905938}}
4852
4853 EQMP
4854
4855     {
4856         .name       = "query-rocker-ports",
4857         .args_type  = "name:s",
4858         .mhandler.cmd_new = qmp_marshal_query_rocker_ports,
4859     },
4860
4861 SQMP
4862 Show rocker switch ports
4863 ------------------------
4864
4865 Arguments:
4866
4867 - "name": switch name
4868
4869 Example:
4870
4871 -> { "execute": "query-rocker-ports", "arguments": { "name": "sw1" } }
4872 <- { "return": [ {"duplex": "full", "enabled": true, "name": "sw1.1",
4873                   "autoneg": "off", "link-up": true, "speed": 10000},
4874                  {"duplex": "full", "enabled": true, "name": "sw1.2",
4875                   "autoneg": "off", "link-up": true, "speed": 10000}
4876    ]}
4877
4878 EQMP
4879
4880     {
4881         .name       = "query-rocker-of-dpa-flows",
4882         .args_type  = "name:s,tbl-id:i?",
4883         .mhandler.cmd_new = qmp_marshal_query_rocker_of_dpa_flows,
4884     },
4885
4886 SQMP
4887 Show rocker switch OF-DPA flow tables
4888 -------------------------------------
4889
4890 Arguments:
4891
4892 - "name": switch name
4893 - "tbl-id": (optional) flow table ID
4894
4895 Example:
4896
4897 -> { "execute": "query-rocker-of-dpa-flows", "arguments": { "name": "sw1" } }
4898 <- { "return": [ {"key": {"in-pport": 0, "priority": 1, "tbl-id": 0},
4899                   "hits": 138,
4900                   "cookie": 0,
4901                   "action": {"goto-tbl": 10},
4902                   "mask": {"in-pport": 4294901760}
4903                  },
4904                  {...more...},
4905    ]}
4906
4907 EQMP
4908
4909     {
4910         .name       = "query-rocker-of-dpa-groups",
4911         .args_type  = "name:s,type:i?",
4912         .mhandler.cmd_new = qmp_marshal_query_rocker_of_dpa_groups,
4913     },
4914
4915 SQMP
4916 Show rocker OF-DPA group tables
4917 -------------------------------
4918
4919 Arguments:
4920
4921 - "name": switch name
4922 - "type": (optional) group type
4923
4924 Example:
4925
4926 -> { "execute": "query-rocker-of-dpa-groups", "arguments": { "name": "sw1" } }
4927 <- { "return": [ {"type": 0, "out-pport": 2, "pport": 2, "vlan-id": 3841,
4928                   "pop-vlan": 1, "id": 251723778},
4929                  {"type": 0, "out-pport": 0, "pport": 0, "vlan-id": 3841,
4930                   "pop-vlan": 1, "id": 251723776},
4931                  {"type": 0, "out-pport": 1, "pport": 1, "vlan-id": 3840,
4932                   "pop-vlan": 1, "id": 251658241},
4933                  {"type": 0, "out-pport": 0, "pport": 0, "vlan-id": 3840,
4934                   "pop-vlan": 1, "id": 251658240}
4935    ]}
4936
4937 EQMP
4938
4939 #if defined TARGET_ARM
4940     {
4941         .name       = "query-gic-capabilities",
4942         .args_type  = "",
4943         .mhandler.cmd_new = qmp_marshal_query_gic_capabilities,
4944     },
4945 #endif
4946
4947 SQMP
4948 query-gic-capabilities
4949 ---------------
4950
4951 Return a list of GICCapability objects, describing supported GIC
4952 (Generic Interrupt Controller) versions.
4953
4954 Arguments: None
4955
4956 Example:
4957
4958 -> { "execute": "query-gic-capabilities" }
4959 <- { "return": [{ "version": 2, "emulated": true, "kernel": false },
4960                 { "version": 3, "emulated": false, "kernel": true } ] }
4961
4962 EQMP
4963
4964     {
4965         .name       = "query-hotpluggable-cpus",
4966         .args_type  = "",
4967         .mhandler.cmd_new = qmp_marshal_query_hotpluggable_cpus,
4968     },
4969
4970 SQMP
4971 Show existing/possible CPUs
4972 ---------------------------
4973
4974 Arguments: None.
4975
4976 Example for pseries machine type started with
4977 -smp 2,cores=2,maxcpus=4 -cpu POWER8:
4978
4979 -> { "execute": "query-hotpluggable-cpus" }
4980 <- {"return": [
4981      { "props": { "core-id": 8 }, "type": "POWER8-spapr-cpu-core",
4982        "vcpus-count": 1 },
4983      { "props": { "core-id": 0 }, "type": "POWER8-spapr-cpu-core",
4984        "vcpus-count": 1, "qom-path": "/machine/unattached/device[0]"}
4985    ]}'