hw/usb/hcd-uhci.c

   1 /*
   2  * USB UHCI controller emulation
   3  *
   4  * Copyright (c) 2005 Fabrice Bellard
   5  *
   6  * Copyright (c) 2008 Max Krasnyansky
   7  *     Magor rewrite of the UHCI data structures parser and frame processor
   8  *     Support for fully async operation and multiple outstanding transactions
   9  *
  10  * Permission is hereby granted, free of charge, to any person obtaining a copy
  11  * of this software and associated documentation files (the "Software"), to deal
  12  * in the Software without restriction, including without limitation the rights
  13  * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
  14  * copies of the Software, and to permit persons to whom the Software is
  15  * furnished to do so, subject to the following conditions:
  16  *
  17  * The above copyright notice and this permission notice shall be included in
  18  * all copies or substantial portions of the Software.
  19  *
  20  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  21  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  22  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
  23  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  24  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
  25  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
  26  * THE SOFTWARE.
  27  */
  28 #include "hw/hw.h"
  29 #include "hw/usb.h"
  30 #include "hw/pci.h"
  31 #include "qemu-timer.h"
  32 #include "iov.h"
  33 #include "dma.h"
  34 #include "trace.h"
  35
  36 //#define DEBUG
  37 //#define DEBUG_DUMP_DATA
  38
  39 #define UHCI_CMD_FGR      (1 << 4)
  40 #define UHCI_CMD_EGSM     (1 << 3)
  41 #define UHCI_CMD_GRESET   (1 << 2)
  42 #define UHCI_CMD_HCRESET  (1 << 1)
  43 #define UHCI_CMD_RS       (1 << 0)
  44
  45 #define UHCI_STS_HCHALTED (1 << 5)
  46 #define UHCI_STS_HCPERR   (1 << 4)
  47 #define UHCI_STS_HSERR    (1 << 3)
  48 #define UHCI_STS_RD       (1 << 2)
  49 #define UHCI_STS_USBERR   (1 << 1)
  50 #define UHCI_STS_USBINT   (1 << 0)
  51
  52 #define TD_CTRL_SPD     (1 << 29)
  53 #define TD_CTRL_ERROR_SHIFT  27
  54 #define TD_CTRL_IOS     (1 << 25)
  55 #define TD_CTRL_IOC     (1 << 24)
  56 #define TD_CTRL_ACTIVE  (1 << 23)
  57 #define TD_CTRL_STALL   (1 << 22)
  58 #define TD_CTRL_BABBLE  (1 << 20)
  59 #define TD_CTRL_NAK     (1 << 19)
  60 #define TD_CTRL_TIMEOUT (1 << 18)
  61
  62 #define UHCI_PORT_SUSPEND (1 << 12)
  63 #define UHCI_PORT_RESET (1 << 9)
  64 #define UHCI_PORT_LSDA  (1 << 8)
  65 #define UHCI_PORT_RD    (1 << 6)
  66 #define UHCI_PORT_ENC   (1 << 3)
  67 #define UHCI_PORT_EN    (1 << 2)
  68 #define UHCI_PORT_CSC   (1 << 1)
  69 #define UHCI_PORT_CCS   (1 << 0)
  70
  71 #define UHCI_PORT_READ_ONLY    (0x1bb)
  72 #define UHCI_PORT_WRITE_CLEAR  (UHCI_PORT_CSC | UHCI_PORT_ENC)
  73
  74 #define FRAME_TIMER_FREQ 1000
  75
  76 #define FRAME_MAX_LOOPS  256
  77
  78 #define NB_PORTS 2
  79
  80 enum {
  81     TD_RESULT_STOP_FRAME = 10,
  82     TD_RESULT_COMPLETE,
  83     TD_RESULT_NEXT_QH,
  84     TD_RESULT_ASYNC_START,
  85     TD_RESULT_ASYNC_CONT,
  86 };
  87
  88 typedef struct UHCIState UHCIState;
  89 typedef struct UHCIAsync UHCIAsync;
  90 typedef struct UHCIQueue UHCIQueue;
  91
  92 /*
  93  * Pending async transaction.
  94  * 'packet' must be the first field because completion
  95  * handler does "(UHCIAsync *) pkt" cast.
  96  */
  97
  98 struct UHCIAsync {
  99     USBPacket packet;
 100     QEMUSGList sgl;
 101     UHCIQueue *queue;
 102     QTAILQ_ENTRY(UHCIAsync) next;
 103     uint32_t  td;
 104     uint8_t   isoc;
 105     uint8_t   done;
 106 };
 107
 108 struct UHCIQueue {
 109     uint32_t  token;
 110     UHCIState *uhci;
 111     QTAILQ_ENTRY(UHCIQueue) next;
 112     QTAILQ_HEAD(, UHCIAsync) asyncs;
 113     int8_t    valid;
 114 };
 115
 116 typedef struct UHCIPort {
 117     USBPort port;
 118     uint16_t ctrl;
 119 } UHCIPort;
 120
 121 struct UHCIState {
 122     PCIDevice dev;
 123     MemoryRegion io_bar;
 124     USBBus bus; /* Note unused when we're a companion controller */
 125     uint16_t cmd; /* cmd register */
 126     uint16_t status;
 127     uint16_t intr; /* interrupt enable register */
 128     uint16_t frnum; /* frame number */
 129     uint32_t fl_base_addr; /* frame list base address */
 130     uint8_t sof_timing;
 131     uint8_t status2; /* bit 0 and 1 are used to generate UHCI_STS_USBINT */
 132     int64_t expire_time;
 133     QEMUTimer *frame_timer;
 134     QEMUBH *bh;
 135     uint32_t frame_bytes;
 136     uint32_t frame_bandwidth;
 137     UHCIPort ports[NB_PORTS];
 138
 139     /* Interrupts that should be raised at the end of the current frame.  */
 140     uint32_t pending_int_mask;
 141     int irq_pin;
 142
 143     /* Active packets */
 144     QTAILQ_HEAD(, UHCIQueue) queues;
 145     uint8_t num_ports_vmstate;
 146
 147     /* Properties */
 148     char *masterbus;
 149     uint32_t firstport;
 150 };
 151
 152 typedef struct UHCI_TD {
 153     uint32_t link;
 154     uint32_t ctrl; /* see TD_CTRL_xxx */
 155     uint32_t token;
 156     uint32_t buffer;
 157 } UHCI_TD;
 158
 159 typedef struct UHCI_QH {
 160     uint32_t link;
 161     uint32_t el_link;
 162 } UHCI_QH;
 163
 164 static inline int32_t uhci_queue_token(UHCI_TD *td)
 165 {
 166     /* covers ep, dev, pid -> identifies the endpoint */
 167     return td->token & 0x7ffff;
 168 }
 169
 170 static UHCIQueue *uhci_queue_get(UHCIState *s, UHCI_TD *td)
 171 {
 172     uint32_t token = uhci_queue_token(td);
 173     UHCIQueue *queue;
 174
 175     QTAILQ_FOREACH(queue, &s->queues, next) {
 176         if (queue->token == token) {
 177             return queue;
 178         }
 179     }
 180
 181     queue = g_new0(UHCIQueue, 1);
 182     queue->uhci = s;
 183     queue->token = token;
 184     QTAILQ_INIT(&queue->asyncs);
 185     QTAILQ_INSERT_HEAD(&s->queues, queue, next);
 186     trace_usb_uhci_queue_add(queue->token);
 187     return queue;
 188 }
 189
 190 static void uhci_queue_free(UHCIQueue *queue)
 191 {
 192     UHCIState *s = queue->uhci;
 193
 194     trace_usb_uhci_queue_del(queue->token);
 195     QTAILQ_REMOVE(&s->queues, queue, next);
 196     g_free(queue);
 197 }
 198
 199 static UHCIAsync *uhci_async_alloc(UHCIQueue *queue, uint32_t addr)
 200 {
 201     UHCIAsync *async = g_new0(UHCIAsync, 1);
 202
 203     async->queue = queue;
 204     async->td = addr;
 205     usb_packet_init(&async->packet);
 206     pci_dma_sglist_init(&async->sgl, &queue->uhci->dev, 1);
 207     trace_usb_uhci_packet_add(async->queue->token, async->td);
 208
 209     return async;
 210 }
 211
 212 static void uhci_async_free(UHCIAsync *async)
 213 {
 214     trace_usb_uhci_packet_del(async->queue->token, async->td);
 215     usb_packet_cleanup(&async->packet);
 216     qemu_sglist_destroy(&async->sgl);
 217     g_free(async);
 218 }
 219
 220 static void uhci_async_link(UHCIAsync *async)
 221 {
 222     UHCIQueue *queue = async->queue;
 223     QTAILQ_INSERT_TAIL(&queue->asyncs, async, next);
 224     trace_usb_uhci_packet_link_async(async->queue->token, async->td);
 225 }
 226
 227 static void uhci_async_unlink(UHCIAsync *async)
 228 {
 229     UHCIQueue *queue = async->queue;
 230     QTAILQ_REMOVE(&queue->asyncs, async, next);
 231     trace_usb_uhci_packet_unlink_async(async->queue->token, async->td);
 232 }
 233
 234 static void uhci_async_cancel(UHCIAsync *async)
 235 {
 236     trace_usb_uhci_packet_cancel(async->queue->token, async->td, async->done);
 237     if (!async->done)
 238         usb_cancel_packet(&async->packet);
 239     uhci_async_free(async);
 240 }
 241
 242 /*
 243  * Mark all outstanding async packets as invalid.
 244  * This is used for canceling them when TDs are removed by the HCD.
 245  */
 246 static void uhci_async_validate_begin(UHCIState *s)
 247 {
 248     UHCIQueue *queue;
 249
 250     QTAILQ_FOREACH(queue, &s->queues, next) {
 251         queue->valid--;
 252     }
 253 }
 254
 255 /*
 256  * Cancel async packets that are no longer valid
 257  */
 258 static void uhci_async_validate_end(UHCIState *s)
 259 {
 260     UHCIQueue *queue, *n;
 261     UHCIAsync *async;
 262
 263     QTAILQ_FOREACH_SAFE(queue, &s->queues, next, n) {
 264         if (queue->valid > 0) {
 265             continue;
 266         }
 267         while (!QTAILQ_EMPTY(&queue->asyncs)) {
 268             async = QTAILQ_FIRST(&queue->asyncs);
 269             uhci_async_unlink(async);
 270             uhci_async_cancel(async);
 271         }
 272         uhci_queue_free(queue);
 273     }
 274 }
 275
 276 static void uhci_async_cancel_device(UHCIState *s, USBDevice *dev)
 277 {
 278     UHCIQueue *queue;
 279     UHCIAsync *curr, *n;
 280
 281     QTAILQ_FOREACH(queue, &s->queues, next) {
 282         QTAILQ_FOREACH_SAFE(curr, &queue->asyncs, next, n) {
 283             if (!usb_packet_is_inflight(&curr->packet) ||
 284                 curr->packet.ep->dev != dev) {
 285                 continue;
 286             }
 287             uhci_async_unlink(curr);
 288             uhci_async_cancel(curr);
 289         }
 290     }
 291 }
 292
 293 static void uhci_async_cancel_all(UHCIState *s)
 294 {
 295     UHCIQueue *queue, *nq;
 296     UHCIAsync *curr, *n;
 297
 298     QTAILQ_FOREACH_SAFE(queue, &s->queues, next, nq) {
 299         QTAILQ_FOREACH_SAFE(curr, &queue->asyncs, next, n) {
 300             uhci_async_unlink(curr);
 301             uhci_async_cancel(curr);
 302         }
 303         uhci_queue_free(queue);
 304     }
 305 }
 306
 307 static UHCIAsync *uhci_async_find_td(UHCIState *s, uint32_t addr, UHCI_TD *td)
 308 {
 309     uint32_t token = uhci_queue_token(td);
 310     UHCIQueue *queue;
 311     UHCIAsync *async;
 312
 313     QTAILQ_FOREACH(queue, &s->queues, next) {
 314         if (queue->token == token) {
 315             break;
 316         }
 317     }
 318     if (queue == NULL) {
 319         return NULL;
 320     }
 321
 322     QTAILQ_FOREACH(async, &queue->asyncs, next) {
 323         if (async->td == addr) {
 324             return async;
 325         }
 326     }
 327
 328     return NULL;
 329 }
 330
 331 static void uhci_update_irq(UHCIState *s)
 332 {
 333     int level;
 334     if (((s->status2 & 1) && (s->intr & (1 << 2))) ||
 335         ((s->status2 & 2) && (s->intr & (1 << 3))) ||
 336         ((s->status & UHCI_STS_USBERR) && (s->intr & (1 << 0))) ||
 337         ((s->status & UHCI_STS_RD) && (s->intr & (1 << 1))) ||
 338         (s->status & UHCI_STS_HSERR) ||
 339         (s->status & UHCI_STS_HCPERR)) {
 340         level = 1;
 341     } else {
 342         level = 0;
 343     }
 344     qemu_set_irq(s->dev.irq[s->irq_pin], level);
 345 }
 346
 347 static void uhci_reset(void *opaque)
 348 {
 349     UHCIState *s = opaque;
 350     uint8_t *pci_conf;
 351     int i;
 352     UHCIPort *port;
 353
 354     trace_usb_uhci_reset();
 355
 356     pci_conf = s->dev.config;
 357
 358     pci_conf[0x6a] = 0x01; /* usb clock */
 359     pci_conf[0x6b] = 0x00;
 360     s->cmd = 0;
 361     s->status = 0;
 362     s->status2 = 0;
 363     s->intr = 0;
 364     s->fl_base_addr = 0;
 365     s->sof_timing = 64;
 366
 367     for(i = 0; i < NB_PORTS; i++) {
 368         port = &s->ports[i];
 369         port->ctrl = 0x0080;
 370         if (port->port.dev && port->port.dev->attached) {
 371             usb_port_reset(&port->port);
 372         }
 373     }
 374
 375     uhci_async_cancel_all(s);
 376     qemu_bh_cancel(s->bh);
 377     uhci_update_irq(s);
 378 }
 379
 380 static const VMStateDescription vmstate_uhci_port = {
 381     .name = "uhci port",
 382     .version_id = 1,
 383     .minimum_version_id = 1,
 384     .minimum_version_id_old = 1,
 385     .fields      = (VMStateField []) {
 386         VMSTATE_UINT16(ctrl, UHCIPort),
 387         VMSTATE_END_OF_LIST()
 388     }
 389 };
 390
 391 static int uhci_post_load(void *opaque, int version_id)
 392 {
 393     UHCIState *s = opaque;
 394
 395     if (version_id < 2) {
 396         s->expire_time = qemu_get_clock_ns(vm_clock) +
 397             (get_ticks_per_sec() / FRAME_TIMER_FREQ);
 398     }
 399     return 0;
 400 }
 401
 402 static const VMStateDescription vmstate_uhci = {
 403     .name = "uhci",
 404     .version_id = 2,
 405     .minimum_version_id = 1,
 406     .minimum_version_id_old = 1,
 407     .post_load = uhci_post_load,
 408     .fields      = (VMStateField []) {
 409         VMSTATE_PCI_DEVICE(dev, UHCIState),
 410         VMSTATE_UINT8_EQUAL(num_ports_vmstate, UHCIState),
 411         VMSTATE_STRUCT_ARRAY(ports, UHCIState, NB_PORTS, 1,
 412                              vmstate_uhci_port, UHCIPort),
 413         VMSTATE_UINT16(cmd, UHCIState),
 414         VMSTATE_UINT16(status, UHCIState),
 415         VMSTATE_UINT16(intr, UHCIState),
 416         VMSTATE_UINT16(frnum, UHCIState),
 417         VMSTATE_UINT32(fl_base_addr, UHCIState),
 418         VMSTATE_UINT8(sof_timing, UHCIState),
 419         VMSTATE_UINT8(status2, UHCIState),
 420         VMSTATE_TIMER(frame_timer, UHCIState),
 421         VMSTATE_INT64_V(expire_time, UHCIState, 2),
 422         VMSTATE_END_OF_LIST()
 423     }
 424 };
 425
 426 static void uhci_ioport_writeb(void *opaque, uint32_t addr, uint32_t val)
 427 {
 428     UHCIState *s = opaque;
 429
 430     addr &= 0x1f;
 431     switch(addr) {
 432     case 0x0c:
 433         s->sof_timing = val;
 434         break;
 435     }
 436 }
 437
 438 static uint32_t uhci_ioport_readb(void *opaque, uint32_t addr)
 439 {
 440     UHCIState *s = opaque;
 441     uint32_t val;
 442
 443     addr &= 0x1f;
 444     switch(addr) {
 445     case 0x0c:
 446         val = s->sof_timing;
 447         break;
 448     default:
 449         val = 0xff;
 450         break;
 451     }
 452     return val;
 453 }
 454
 455 static void uhci_ioport_writew(void *opaque, uint32_t addr, uint32_t val)
 456 {
 457     UHCIState *s = opaque;
 458
 459     addr &= 0x1f;
 460     trace_usb_uhci_mmio_writew(addr, val);
 461
 462     switch(addr) {
 463     case 0x00:
 464         if ((val & UHCI_CMD_RS) && !(s->cmd & UHCI_CMD_RS)) {
 465             /* start frame processing */
 466             trace_usb_uhci_schedule_start();
 467             s->expire_time = qemu_get_clock_ns(vm_clock) +
 468                 (get_ticks_per_sec() / FRAME_TIMER_FREQ);
 469             qemu_mod_timer(s->frame_timer, qemu_get_clock_ns(vm_clock));
 470             s->status &= ~UHCI_STS_HCHALTED;
 471         } else if (!(val & UHCI_CMD_RS)) {
 472             s->status |= UHCI_STS_HCHALTED;
 473         }
 474         if (val & UHCI_CMD_GRESET) {
 475             UHCIPort *port;
 476             int i;
 477
 478             /* send reset on the USB bus */
 479             for(i = 0; i < NB_PORTS; i++) {
 480                 port = &s->ports[i];
 481                 usb_device_reset(port->port.dev);
 482             }
 483             uhci_reset(s);
 484             return;
 485         }
 486         if (val & UHCI_CMD_HCRESET) {
 487             uhci_reset(s);
 488             return;
 489         }
 490         s->cmd = val;
 491         break;
 492     case 0x02:
 493         s->status &= ~val;
 494         /* XXX: the chip spec is not coherent, so we add a hidden
 495            register to distinguish between IOC and SPD */
 496         if (val & UHCI_STS_USBINT)
 497             s->status2 = 0;
 498         uhci_update_irq(s);
 499         break;
 500     case 0x04:
 501         s->intr = val;
 502         uhci_update_irq(s);
 503         break;
 504     case 0x06:
 505         if (s->status & UHCI_STS_HCHALTED)
 506             s->frnum = val & 0x7ff;
 507         break;
 508     case 0x10 ... 0x1f:
 509         {
 510             UHCIPort *port;
 511             USBDevice *dev;
 512             int n;
 513
 514             n = (addr >> 1) & 7;
 515             if (n >= NB_PORTS)
 516                 return;
 517             port = &s->ports[n];
 518             dev = port->port.dev;
 519             if (dev && dev->attached) {
 520                 /* port reset */
 521                 if ( (val & UHCI_PORT_RESET) &&
 522                      !(port->ctrl & UHCI_PORT_RESET) ) {
 523                     usb_device_reset(dev);
 524                 }
 525             }
 526             port->ctrl &= UHCI_PORT_READ_ONLY;
 527             port->ctrl |= (val & ~UHCI_PORT_READ_ONLY);
 528             /* some bits are reset when a '1' is written to them */
 529             port->ctrl &= ~(val & UHCI_PORT_WRITE_CLEAR);
 530         }
 531         break;
 532     }
 533 }
 534
 535 static uint32_t uhci_ioport_readw(void *opaque, uint32_t addr)
 536 {
 537     UHCIState *s = opaque;
 538     uint32_t val;
 539
 540     addr &= 0x1f;
 541     switch(addr) {
 542     case 0x00:
 543         val = s->cmd;
 544         break;
 545     case 0x02:
 546         val = s->status;
 547         break;
 548     case 0x04:
 549         val = s->intr;
 550         break;
 551     case 0x06:
 552         val = s->frnum;
 553         break;
 554     case 0x10 ... 0x1f:
 555         {
 556             UHCIPort *port;
 557             int n;
 558             n = (addr >> 1) & 7;
 559             if (n >= NB_PORTS)
 560                 goto read_default;
 561             port = &s->ports[n];
 562             val = port->ctrl;
 563         }
 564         break;
 565     default:
 566     read_default:
 567         val = 0xff7f; /* disabled port */
 568         break;
 569     }
 570
 571     trace_usb_uhci_mmio_readw(addr, val);
 572
 573     return val;
 574 }
 575
 576 static void uhci_ioport_writel(void *opaque, uint32_t addr, uint32_t val)
 577 {
 578     UHCIState *s = opaque;
 579
 580     addr &= 0x1f;
 581     trace_usb_uhci_mmio_writel(addr, val);
 582
 583     switch(addr) {
 584     case 0x08:
 585         s->fl_base_addr = val & ~0xfff;
 586         break;
 587     }
 588 }
 589
 590 static uint32_t uhci_ioport_readl(void *opaque, uint32_t addr)
 591 {
 592     UHCIState *s = opaque;
 593     uint32_t val;
 594
 595     addr &= 0x1f;
 596     switch(addr) {
 597     case 0x08:
 598         val = s->fl_base_addr;
 599         break;
 600     default:
 601         val = 0xffffffff;
 602         break;
 603     }
 604     trace_usb_uhci_mmio_readl(addr, val);
 605     return val;
 606 }
 607
 608 /* signal resume if controller suspended */
 609 static void uhci_resume (void *opaque)
 610 {
 611     UHCIState *s = (UHCIState *)opaque;
 612
 613     if (!s)
 614         return;
 615
 616     if (s->cmd & UHCI_CMD_EGSM) {
 617         s->cmd |= UHCI_CMD_FGR;
 618         s->status |= UHCI_STS_RD;
 619         uhci_update_irq(s);
 620     }
 621 }
 622
 623 static void uhci_attach(USBPort *port1)
 624 {
 625     UHCIState *s = port1->opaque;
 626     UHCIPort *port = &s->ports[port1->index];
 627
 628     /* set connect status */
 629     port->ctrl |= UHCI_PORT_CCS | UHCI_PORT_CSC;
 630
 631     /* update speed */
 632     if (port->port.dev->speed == USB_SPEED_LOW) {
 633         port->ctrl |= UHCI_PORT_LSDA;
 634     } else {
 635         port->ctrl &= ~UHCI_PORT_LSDA;
 636     }
 637
 638     uhci_resume(s);
 639 }
 640
 641 static void uhci_detach(USBPort *port1)
 642 {
 643     UHCIState *s = port1->opaque;
 644     UHCIPort *port = &s->ports[port1->index];
 645
 646     uhci_async_cancel_device(s, port1->dev);
 647
 648     /* set connect status */
 649     if (port->ctrl & UHCI_PORT_CCS) {
 650         port->ctrl &= ~UHCI_PORT_CCS;
 651         port->ctrl |= UHCI_PORT_CSC;
 652     }
 653     /* disable port */
 654     if (port->ctrl & UHCI_PORT_EN) {
 655         port->ctrl &= ~UHCI_PORT_EN;
 656         port->ctrl |= UHCI_PORT_ENC;
 657     }
 658
 659     uhci_resume(s);
 660 }
 661
 662 static void uhci_child_detach(USBPort *port1, USBDevice *child)
 663 {
 664     UHCIState *s = port1->opaque;
 665
 666     uhci_async_cancel_device(s, child);
 667 }
 668
 669 static void uhci_wakeup(USBPort *port1)
 670 {
 671     UHCIState *s = port1->opaque;
 672     UHCIPort *port = &s->ports[port1->index];
 673
 674     if (port->ctrl & UHCI_PORT_SUSPEND && !(port->ctrl & UHCI_PORT_RD)) {
 675         port->ctrl |= UHCI_PORT_RD;
 676         uhci_resume(s);
 677     }
 678 }
 679
 680 static USBDevice *uhci_find_device(UHCIState *s, uint8_t addr)
 681 {
 682     USBDevice *dev;
 683     int i;
 684
 685     for (i = 0; i < NB_PORTS; i++) {
 686         UHCIPort *port = &s->ports[i];
 687         if (!(port->ctrl & UHCI_PORT_EN)) {
 688             continue;
 689         }
 690         dev = usb_find_device(&port->port, addr);
 691         if (dev != NULL) {
 692             return dev;
 693         }
 694     }
 695     return NULL;
 696 }
 697
 698 static void uhci_async_complete(USBPort *port, USBPacket *packet);
 699 static void uhci_process_frame(UHCIState *s);
 700
 701 /* return -1 if fatal error (frame must be stopped)
 702           0 if TD successful
 703           1 if TD unsuccessful or inactive
 704 */
 705 static int uhci_complete_td(UHCIState *s, UHCI_TD *td, UHCIAsync *async, uint32_t *int_mask)
 706 {
 707     int len = 0, max_len, err, ret;
 708     uint8_t pid;
 709
 710     max_len = ((td->token >> 21) + 1) & 0x7ff;
 711     pid = td->token & 0xff;
 712
 713     ret = async->packet.result;
 714
 715     if (td->ctrl & TD_CTRL_IOS)
 716         td->ctrl &= ~TD_CTRL_ACTIVE;
 717
 718     if (ret < 0)
 719         goto out;
 720
 721     len = async->packet.result;
 722     td->ctrl = (td->ctrl & ~0x7ff) | ((len - 1) & 0x7ff);
 723
 724     /* The NAK bit may have been set by a previous frame, so clear it
 725        here.  The docs are somewhat unclear, but win2k relies on this
 726        behavior.  */
 727     td->ctrl &= ~(TD_CTRL_ACTIVE | TD_CTRL_NAK);
 728     if (td->ctrl & TD_CTRL_IOC)
 729         *int_mask |= 0x01;
 730
 731     if (pid == USB_TOKEN_IN) {
 732         if ((td->ctrl & TD_CTRL_SPD) && len < max_len) {
 733             *int_mask |= 0x02;
 734             /* short packet: do not update QH */
 735             trace_usb_uhci_packet_complete_shortxfer(async->queue->token,
 736                                                     async->td);
 737             return TD_RESULT_NEXT_QH;
 738         }
 739     }
 740
 741     /* success */
 742     trace_usb_uhci_packet_complete_success(async->queue->token, async->td);
 743     return TD_RESULT_COMPLETE;
 744
 745 out:
 746     /*
 747      * We should not do any further processing on a queue with errors!
 748      * This is esp. important for bulk endpoints with pipelining enabled
 749      * (redirection to a real USB device), where we must cancel all the
 750      * transfers after this one so that:
 751      * 1) If they've completed already, they are not processed further
 752      *    causing more stalls, originating from the same failed transfer
 753      * 2) If still in flight, they are cancelled before the guest does
 754      *    a clear stall, otherwise the guest and device can loose sync!
 755      */
 756     while (!QTAILQ_EMPTY(&async->queue->asyncs)) {
 757         UHCIAsync *as = QTAILQ_FIRST(&async->queue->asyncs);
 758         uhci_async_unlink(as);
 759         uhci_async_cancel(as);
 760     }
 761
 762     switch(ret) {
 763     case USB_RET_STALL:
 764         td->ctrl |= TD_CTRL_STALL;
 765         td->ctrl &= ~TD_CTRL_ACTIVE;
 766         s->status |= UHCI_STS_USBERR;
 767         if (td->ctrl & TD_CTRL_IOC) {
 768             *int_mask |= 0x01;
 769         }
 770         uhci_update_irq(s);
 771         trace_usb_uhci_packet_complete_stall(async->queue->token, async->td);
 772         return TD_RESULT_NEXT_QH;
 773
 774     case USB_RET_BABBLE:
 775         td->ctrl |= TD_CTRL_BABBLE | TD_CTRL_STALL;
 776         td->ctrl &= ~TD_CTRL_ACTIVE;
 777         s->status |= UHCI_STS_USBERR;
 778         if (td->ctrl & TD_CTRL_IOC) {
 779             *int_mask |= 0x01;
 780         }
 781         uhci_update_irq(s);
 782         /* frame interrupted */
 783         trace_usb_uhci_packet_complete_babble(async->queue->token, async->td);
 784         return TD_RESULT_STOP_FRAME;
 785
 786     case USB_RET_NAK:
 787         td->ctrl |= TD_CTRL_NAK;
 788         if (pid == USB_TOKEN_SETUP)
 789             break;
 790         return TD_RESULT_NEXT_QH;
 791
 792     case USB_RET_IOERROR:
 793     case USB_RET_NODEV:
 794     default:
 795         break;
 796     }
 797
 798     /* Retry the TD if error count is not zero */
 799
 800     td->ctrl |= TD_CTRL_TIMEOUT;
 801     err = (td->ctrl >> TD_CTRL_ERROR_SHIFT) & 3;
 802     if (err != 0) {
 803         err--;
 804         if (err == 0) {
 805             td->ctrl &= ~TD_CTRL_ACTIVE;
 806             s->status |= UHCI_STS_USBERR;
 807             if (td->ctrl & TD_CTRL_IOC)
 808                 *int_mask |= 0x01;
 809             uhci_update_irq(s);
 810             trace_usb_uhci_packet_complete_error(async->queue->token,
 811                                                  async->td);
 812         }
 813     }
 814     td->ctrl = (td->ctrl & ~(3 << TD_CTRL_ERROR_SHIFT)) |
 815         (err << TD_CTRL_ERROR_SHIFT);
 816     return TD_RESULT_NEXT_QH;
 817 }
 818
 819 static int uhci_handle_td(UHCIState *s, uint32_t addr, UHCI_TD *td,
 820                           uint32_t *int_mask, bool queuing)
 821 {
 822     UHCIAsync *async;
 823     int len = 0, max_len;
 824     uint8_t pid;
 825     USBDevice *dev;
 826     USBEndpoint *ep;
 827
 828     /* Is active ? */
 829     if (!(td->ctrl & TD_CTRL_ACTIVE))
 830         return TD_RESULT_NEXT_QH;
 831
 832     async = uhci_async_find_td(s, addr, td);
 833     if (async) {
 834         /* Already submitted */
 835         async->queue->valid = 32;
 836
 837         if (!async->done)
 838             return TD_RESULT_ASYNC_CONT;
 839         if (queuing) {
 840             /* we are busy filling the queue, we are not prepared
 841                to consume completed packages then, just leave them
 842                in async state */
 843             return TD_RESULT_ASYNC_CONT;
 844         }
 845
 846         uhci_async_unlink(async);
 847         goto done;
 848     }
 849
 850     /* Allocate new packet */
 851     async = uhci_async_alloc(uhci_queue_get(s, td), addr);
 852
 853     /* valid needs to be large enough to handle 10 frame delay
 854      * for initial isochronous requests
 855      */
 856     async->queue->valid = 32;
 857     async->isoc = td->ctrl & TD_CTRL_IOS;
 858
 859     max_len = ((td->token >> 21) + 1) & 0x7ff;
 860     pid = td->token & 0xff;
 861
 862     dev = uhci_find_device(s, (td->token >> 8) & 0x7f);
 863     ep = usb_ep_get(dev, pid, (td->token >> 15) & 0xf);
 864     usb_packet_setup(&async->packet, pid, ep, addr);
 865     qemu_sglist_add(&async->sgl, td->buffer, max_len);
 866     usb_packet_map(&async->packet, &async->sgl);
 867
 868     switch(pid) {
 869     case USB_TOKEN_OUT:
 870     case USB_TOKEN_SETUP:
 871         len = usb_handle_packet(dev, &async->packet);
 872         if (len >= 0)
 873             len = max_len;
 874         break;
 875
 876     case USB_TOKEN_IN:
 877         len = usb_handle_packet(dev, &async->packet);
 878         break;
 879
 880     default:
 881         /* invalid pid : frame interrupted */
 882         uhci_async_free(async);
 883         s->status |= UHCI_STS_HCPERR;
 884         uhci_update_irq(s);
 885         return TD_RESULT_STOP_FRAME;
 886     }
 887
 888     if (len == USB_RET_ASYNC) {
 889         uhci_async_link(async);
 890         return TD_RESULT_ASYNC_START;
 891     }
 892
 893     async->packet.result = len;
 894
 895 done:
 896     len = uhci_complete_td(s, td, async, int_mask);
 897     usb_packet_unmap(&async->packet, &async->sgl);
 898     uhci_async_free(async);
 899     return len;
 900 }
 901
 902 static void uhci_async_complete(USBPort *port, USBPacket *packet)
 903 {
 904     UHCIAsync *async = container_of(packet, UHCIAsync, packet);
 905     UHCIState *s = async->queue->uhci;
 906
 907     if (async->isoc) {
 908         UHCI_TD td;
 909         uint32_t link = async->td;
 910         uint32_t int_mask = 0, val;
 911
 912         pci_dma_read(&s->dev, link & ~0xf, &td, sizeof(td));
 913         le32_to_cpus(&td.link);
 914         le32_to_cpus(&td.ctrl);
 915         le32_to_cpus(&td.token);
 916         le32_to_cpus(&td.buffer);
 917
 918         uhci_async_unlink(async);
 919         uhci_complete_td(s, &td, async, &int_mask);
 920         s->pending_int_mask |= int_mask;
 921
 922         /* update the status bits of the TD */
 923         val = cpu_to_le32(td.ctrl);
 924         pci_dma_write(&s->dev, (link & ~0xf) + 4, &val, sizeof(val));
 925         uhci_async_free(async);
 926     } else {
 927         async->done = 1;
 928         if (s->frame_bytes < s->frame_bandwidth) {
 929             qemu_bh_schedule(s->bh);
 930         }
 931     }
 932 }
 933
 934 static int is_valid(uint32_t link)
 935 {
 936     return (link & 1) == 0;
 937 }
 938
 939 static int is_qh(uint32_t link)
 940 {
 941     return (link & 2) != 0;
 942 }
 943
 944 static int depth_first(uint32_t link)
 945 {
 946     return (link & 4) != 0;
 947 }
 948
 949 /* QH DB used for detecting QH loops */
 950 #define UHCI_MAX_QUEUES 128
 951 typedef struct {
 952     uint32_t addr[UHCI_MAX_QUEUES];
 953     int      count;
 954 } QhDb;
 955
 956 static void qhdb_reset(QhDb *db)
 957 {
 958     db->count = 0;
 959 }
 960
 961 /* Add QH to DB. Returns 1 if already present or DB is full. */
 962 static int qhdb_insert(QhDb *db, uint32_t addr)
 963 {
 964     int i;
 965     for (i = 0; i < db->count; i++)
 966         if (db->addr[i] == addr)
 967             return 1;
 968
 969     if (db->count >= UHCI_MAX_QUEUES)
 970         return 1;
 971
 972     db->addr[db->count++] = addr;
 973     return 0;
 974 }
 975
 976 static void uhci_fill_queue(UHCIState *s, UHCI_TD *td)
 977 {
 978     uint32_t int_mask = 0;
 979     uint32_t plink = td->link;
 980     uint32_t token = uhci_queue_token(td);
 981     UHCI_TD ptd;
 982     int ret;
 983
 984     while (is_valid(plink)) {
 985         pci_dma_read(&s->dev, plink & ~0xf, &ptd, sizeof(ptd));
 986         le32_to_cpus(&ptd.link);
 987         le32_to_cpus(&ptd.ctrl);
 988         le32_to_cpus(&ptd.token);
 989         le32_to_cpus(&ptd.buffer);
 990         if (!(ptd.ctrl & TD_CTRL_ACTIVE)) {
 991             break;
 992         }
 993         if (uhci_queue_token(&ptd) != token) {
 994             break;
 995         }
 996         trace_usb_uhci_td_queue(plink & ~0xf, ptd.ctrl, ptd.token);
 997         ret = uhci_handle_td(s, plink, &ptd, &int_mask, true);
 998         if (ret == TD_RESULT_ASYNC_CONT) {
 999             break;
1000         }
1001         assert(ret == TD_RESULT_ASYNC_START);
1002         assert(int_mask == 0);
1003         if (ptd.ctrl & TD_CTRL_SPD) {
1004             break;
1005         }
1006         plink = ptd.link;
1007     }
1008 }
1009
1010 static void uhci_process_frame(UHCIState *s)
1011 {
1012     uint32_t frame_addr, link, old_td_ctrl, val, int_mask;
1013     uint32_t curr_qh, td_count = 0;
1014     int cnt, ret;
1015     UHCI_TD td;
1016     UHCI_QH qh;
1017     QhDb qhdb;
1018
1019     frame_addr = s->fl_base_addr + ((s->frnum & 0x3ff) << 2);
1020
1021     pci_dma_read(&s->dev, frame_addr, &link, 4);
1022     le32_to_cpus(&link);
1023
1024     int_mask = 0;
1025     curr_qh  = 0;
1026
1027     qhdb_reset(&qhdb);
1028
1029     for (cnt = FRAME_MAX_LOOPS; is_valid(link) && cnt; cnt--) {
1030         if (s->frame_bytes >= s->frame_bandwidth) {
1031             /* We've reached the usb 1.1 bandwidth, which is
1032                1280 bytes/frame, stop processing */
1033             trace_usb_uhci_frame_stop_bandwidth();
1034             break;
1035         }
1036         if (is_qh(link)) {
1037             /* QH */
1038             trace_usb_uhci_qh_load(link & ~0xf);
1039
1040             if (qhdb_insert(&qhdb, link)) {
1041                 /*
1042                  * We're going in circles. Which is not a bug because
1043                  * HCD is allowed to do that as part of the BW management.
1044                  *
1045                  * Stop processing here if no transaction has been done
1046                  * since we've been here last time.
1047                  */
1048                 if (td_count == 0) {
1049                     trace_usb_uhci_frame_loop_stop_idle();
1050                     break;
1051                 } else {
1052                     trace_usb_uhci_frame_loop_continue();
1053                     td_count = 0;
1054                     qhdb_reset(&qhdb);
1055                     qhdb_insert(&qhdb, link);
1056                 }
1057             }
1058
1059             pci_dma_read(&s->dev, link & ~0xf, &qh, sizeof(qh));
1060             le32_to_cpus(&qh.link);
1061             le32_to_cpus(&qh.el_link);
1062
1063             if (!is_valid(qh.el_link)) {
1064                 /* QH w/o elements */
1065                 curr_qh = 0;
1066                 link = qh.link;
1067             } else {
1068                 /* QH with elements */
1069                 curr_qh = link;
1070                 link = qh.el_link;
1071             }
1072             continue;
1073         }
1074
1075         /* TD */
1076         pci_dma_read(&s->dev, link & ~0xf, &td, sizeof(td));
1077         le32_to_cpus(&td.link);
1078         le32_to_cpus(&td.ctrl);
1079         le32_to_cpus(&td.token);
1080         le32_to_cpus(&td.buffer);
1081         trace_usb_uhci_td_load(curr_qh & ~0xf, link & ~0xf, td.ctrl, td.token);
1082
1083         old_td_ctrl = td.ctrl;
1084         ret = uhci_handle_td(s, link, &td, &int_mask, false);
1085         if (old_td_ctrl != td.ctrl) {
1086             /* update the status bits of the TD */
1087             val = cpu_to_le32(td.ctrl);
1088             pci_dma_write(&s->dev, (link & ~0xf) + 4, &val, sizeof(val));
1089         }
1090
1091         switch (ret) {
1092         case TD_RESULT_STOP_FRAME: /* interrupted frame */
1093             goto out;
1094
1095         case TD_RESULT_NEXT_QH:
1096         case TD_RESULT_ASYNC_CONT:
1097             trace_usb_uhci_td_nextqh(curr_qh & ~0xf, link & ~0xf);
1098             link = curr_qh ? qh.link : td.link;
1099             continue;
1100
1101         case TD_RESULT_ASYNC_START:
1102             trace_usb_uhci_td_async(curr_qh & ~0xf, link & ~0xf);
1103             if (is_valid(td.link) && !(td.ctrl & TD_CTRL_SPD)) {
1104                 uhci_fill_queue(s, &td);
1105             }
1106             link = curr_qh ? qh.link : td.link;
1107             continue;
1108
1109         case TD_RESULT_COMPLETE:
1110             trace_usb_uhci_td_complete(curr_qh & ~0xf, link & ~0xf);
1111             link = td.link;
1112             td_count++;
1113             s->frame_bytes += (td.ctrl & 0x7ff) + 1;
1114
1115             if (curr_qh) {
1116                 /* update QH element link */
1117                 qh.el_link = link;
1118                 val = cpu_to_le32(qh.el_link);
1119                 pci_dma_write(&s->dev, (curr_qh & ~0xf) + 4, &val, sizeof(val));
1120
1121                 if (!depth_first(link)) {
1122                     /* done with this QH */
1123                     curr_qh = 0;
1124                     link    = qh.link;
1125                 }
1126             }
1127             break;
1128
1129         default:
1130             assert(!"unknown return code");
1131         }
1132
1133         /* go to the next entry */
1134     }
1135
1136 out:
1137     s->pending_int_mask |= int_mask;
1138 }
1139
1140 static void uhci_bh(void *opaque)
1141 {
1142     UHCIState *s = opaque;
1143     uhci_process_frame(s);
1144 }
1145
1146 static void uhci_frame_timer(void *opaque)
1147 {
1148     UHCIState *s = opaque;
1149
1150     /* prepare the timer for the next frame */
1151     s->expire_time += (get_ticks_per_sec() / FRAME_TIMER_FREQ);
1152     s->frame_bytes = 0;
1153     qemu_bh_cancel(s->bh);
1154
1155     if (!(s->cmd & UHCI_CMD_RS)) {
1156         /* Full stop */
1157         trace_usb_uhci_schedule_stop();
1158         qemu_del_timer(s->frame_timer);
1159         uhci_async_cancel_all(s);
1160         /* set hchalted bit in status - UHCI11D 2.1.2 */
1161         s->status |= UHCI_STS_HCHALTED;
1162         return;
1163     }
1164
1165     /* Complete the previous frame */
1166     if (s->pending_int_mask) {
1167         s->status2 |= s->pending_int_mask;
1168         s->status  |= UHCI_STS_USBINT;
1169         uhci_update_irq(s);
1170     }
1171     s->pending_int_mask = 0;
1172
1173     /* Start new frame */
1174     s->frnum = (s->frnum + 1) & 0x7ff;
1175
1176     trace_usb_uhci_frame_start(s->frnum);
1177
1178     uhci_async_validate_begin(s);
1179
1180     uhci_process_frame(s);
1181
1182     uhci_async_validate_end(s);
1183
1184     qemu_mod_timer(s->frame_timer, s->expire_time);
1185 }
1186
1187 static const MemoryRegionPortio uhci_portio[] = {
1188     { 0, 32, 2, .write = uhci_ioport_writew, },
1189     { 0, 32, 2, .read = uhci_ioport_readw, },
1190     { 0, 32, 4, .write = uhci_ioport_writel, },
1191     { 0, 32, 4, .read = uhci_ioport_readl, },
1192     { 0, 32, 1, .write = uhci_ioport_writeb, },
1193     { 0, 32, 1, .read = uhci_ioport_readb, },
1194     PORTIO_END_OF_LIST()
1195 };
1196
1197 static const MemoryRegionOps uhci_ioport_ops = {
1198     .old_portio = uhci_portio,
1199 };
1200
1201 static USBPortOps uhci_port_ops = {
1202     .attach = uhci_attach,
1203     .detach = uhci_detach,
1204     .child_detach = uhci_child_detach,
1205     .wakeup = uhci_wakeup,
1206     .complete = uhci_async_complete,
1207 };
1208
1209 static USBBusOps uhci_bus_ops = {
1210 };
1211
1212 static int usb_uhci_common_initfn(PCIDevice *dev)
1213 {
1214     PCIDeviceClass *pc = PCI_DEVICE_GET_CLASS(dev);
1215     UHCIState *s = DO_UPCAST(UHCIState, dev, dev);
1216     uint8_t *pci_conf = s->dev.config;
1217     int i;
1218
1219     pci_conf[PCI_CLASS_PROG] = 0x00;
1220     /* TODO: reset value should be 0. */
1221     pci_conf[USB_SBRN] = USB_RELEASE_1; // release number
1222
1223     switch (pc->device_id) {
1224     case PCI_DEVICE_ID_INTEL_82801I_UHCI1:
1225         s->irq_pin = 0;  /* A */
1226         break;
1227     case PCI_DEVICE_ID_INTEL_82801I_UHCI2:
1228         s->irq_pin = 1;  /* B */
1229         break;
1230     case PCI_DEVICE_ID_INTEL_82801I_UHCI3:
1231         s->irq_pin = 2;  /* C */
1232         break;
1233     default:
1234         s->irq_pin = 3;  /* D */
1235         break;
1236     }
1237     pci_config_set_interrupt_pin(pci_conf, s->irq_pin + 1);
1238
1239     if (s->masterbus) {
1240         USBPort *ports[NB_PORTS];
1241         for(i = 0; i < NB_PORTS; i++) {
1242             ports[i] = &s->ports[i].port;
1243         }
1244         if (usb_register_companion(s->masterbus, ports, NB_PORTS,
1245                 s->firstport, s, &uhci_port_ops,
1246                 USB_SPEED_MASK_LOW | USB_SPEED_MASK_FULL) != 0) {
1247             return -1;
1248         }
1249     } else {
1250         usb_bus_new(&s->bus, &uhci_bus_ops, &s->dev.qdev);
1251         for (i = 0; i < NB_PORTS; i++) {
1252             usb_register_port(&s->bus, &s->ports[i].port, s, i, &uhci_port_ops,
1253                               USB_SPEED_MASK_LOW | USB_SPEED_MASK_FULL);
1254         }
1255     }
1256     s->bh = qemu_bh_new(uhci_bh, s);
1257     s->frame_timer = qemu_new_timer_ns(vm_clock, uhci_frame_timer, s);
1258     s->num_ports_vmstate = NB_PORTS;
1259     QTAILQ_INIT(&s->queues);
1260
1261     qemu_register_reset(uhci_reset, s);
1262
1263     memory_region_init_io(&s->io_bar, &uhci_ioport_ops, s, "uhci", 0x20);
1264     /* Use region 4 for consistency with real hardware.  BSD guests seem
1265        to rely on this.  */
1266     pci_register_bar(&s->dev, 4, PCI_BASE_ADDRESS_SPACE_IO, &s->io_bar);
1267
1268     return 0;
1269 }
1270
1271 static int usb_uhci_vt82c686b_initfn(PCIDevice *dev)
1272 {
1273     UHCIState *s = DO_UPCAST(UHCIState, dev, dev);
1274     uint8_t *pci_conf = s->dev.config;
1275
1276     /* USB misc control 1/2 */
1277     pci_set_long(pci_conf + 0x40,0x00001000);
1278     /* PM capability */
1279     pci_set_long(pci_conf + 0x80,0x00020001);
1280     /* USB legacy support  */
1281     pci_set_long(pci_conf + 0xc0,0x00002000);
1282
1283     return usb_uhci_common_initfn(dev);
1284 }
1285
1286 static void usb_uhci_exit(PCIDevice *dev)
1287 {
1288     UHCIState *s = DO_UPCAST(UHCIState, dev, dev);
1289
1290     memory_region_destroy(&s->io_bar);
1291 }
1292
1293 static Property uhci_properties[] = {
1294     DEFINE_PROP_STRING("masterbus", UHCIState, masterbus),
1295     DEFINE_PROP_UINT32("firstport", UHCIState, firstport, 0),
1296     DEFINE_PROP_UINT32("bandwidth", UHCIState, frame_bandwidth, 1280),
1297     DEFINE_PROP_END_OF_LIST(),
1298 };
1299
1300 static void piix3_uhci_class_init(ObjectClass *klass, void *data)
1301 {
1302     DeviceClass *dc = DEVICE_CLASS(klass);
1303     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
1304
1305     k->init = usb_uhci_common_initfn;
1306     k->exit = usb_uhci_exit;
1307     k->vendor_id = PCI_VENDOR_ID_INTEL;
1308     k->device_id = PCI_DEVICE_ID_INTEL_82371SB_2;
1309     k->revision = 0x01;
1310     k->class_id = PCI_CLASS_SERIAL_USB;
1311     dc->vmsd = &vmstate_uhci;
1312     dc->props = uhci_properties;
1313 }
1314
1315 static TypeInfo piix3_uhci_info = {
1316     .name          = "piix3-usb-uhci",
1317     .parent        = TYPE_PCI_DEVICE,
1318     .instance_size = sizeof(UHCIState),
1319     .class_init    = piix3_uhci_class_init,
1320 };
1321
1322 static void piix4_uhci_class_init(ObjectClass *klass, void *data)
1323 {
1324     DeviceClass *dc = DEVICE_CLASS(klass);
1325     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
1326
1327     k->init = usb_uhci_common_initfn;
1328     k->exit = usb_uhci_exit;
1329     k->vendor_id = PCI_VENDOR_ID_INTEL;
1330     k->device_id = PCI_DEVICE_ID_INTEL_82371AB_2;
1331     k->revision = 0x01;
1332     k->class_id = PCI_CLASS_SERIAL_USB;
1333     dc->vmsd = &vmstate_uhci;
1334     dc->props = uhci_properties;
1335 }
1336
1337 static TypeInfo piix4_uhci_info = {
1338     .name          = "piix4-usb-uhci",
1339     .parent        = TYPE_PCI_DEVICE,
1340     .instance_size = sizeof(UHCIState),
1341     .class_init    = piix4_uhci_class_init,
1342 };
1343
1344 static void vt82c686b_uhci_class_init(ObjectClass *klass, void *data)
1345 {
1346     DeviceClass *dc = DEVICE_CLASS(klass);
1347     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
1348
1349     k->init = usb_uhci_vt82c686b_initfn;
1350     k->exit = usb_uhci_exit;
1351     k->vendor_id = PCI_VENDOR_ID_VIA;
1352     k->device_id = PCI_DEVICE_ID_VIA_UHCI;
1353     k->revision = 0x01;
1354     k->class_id = PCI_CLASS_SERIAL_USB;
1355     dc->vmsd = &vmstate_uhci;
1356     dc->props = uhci_properties;
1357 }
1358
1359 static TypeInfo vt82c686b_uhci_info = {
1360     .name          = "vt82c686b-usb-uhci",
1361     .parent        = TYPE_PCI_DEVICE,
1362     .instance_size = sizeof(UHCIState),
1363     .class_init    = vt82c686b_uhci_class_init,
1364 };
1365
1366 static void ich9_uhci1_class_init(ObjectClass *klass, void *data)
1367 {
1368     DeviceClass *dc = DEVICE_CLASS(klass);
1369     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
1370
1371     k->init = usb_uhci_common_initfn;
1372     k->vendor_id = PCI_VENDOR_ID_INTEL;
1373     k->device_id = PCI_DEVICE_ID_INTEL_82801I_UHCI1;
1374     k->revision = 0x03;
1375     k->class_id = PCI_CLASS_SERIAL_USB;
1376     dc->vmsd = &vmstate_uhci;
1377     dc->props = uhci_properties;
1378 }
1379
1380 static TypeInfo ich9_uhci1_info = {
1381     .name          = "ich9-usb-uhci1",
1382     .parent        = TYPE_PCI_DEVICE,
1383     .instance_size = sizeof(UHCIState),
1384     .class_init    = ich9_uhci1_class_init,
1385 };
1386
1387 static void ich9_uhci2_class_init(ObjectClass *klass, void *data)
1388 {
1389     DeviceClass *dc = DEVICE_CLASS(klass);
1390     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
1391
1392     k->init = usb_uhci_common_initfn;
1393     k->vendor_id = PCI_VENDOR_ID_INTEL;
1394     k->device_id = PCI_DEVICE_ID_INTEL_82801I_UHCI2;
1395     k->revision = 0x03;
1396     k->class_id = PCI_CLASS_SERIAL_USB;
1397     dc->vmsd = &vmstate_uhci;
1398     dc->props = uhci_properties;
1399 }
1400
1401 static TypeInfo ich9_uhci2_info = {
1402     .name          = "ich9-usb-uhci2",
1403     .parent        = TYPE_PCI_DEVICE,
1404     .instance_size = sizeof(UHCIState),
1405     .class_init    = ich9_uhci2_class_init,
1406 };
1407
1408 static void ich9_uhci3_class_init(ObjectClass *klass, void *data)
1409 {
1410     DeviceClass *dc = DEVICE_CLASS(klass);
1411     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
1412
1413     k->init = usb_uhci_common_initfn;
1414     k->vendor_id = PCI_VENDOR_ID_INTEL;
1415     k->device_id = PCI_DEVICE_ID_INTEL_82801I_UHCI3;
1416     k->revision = 0x03;
1417     k->class_id = PCI_CLASS_SERIAL_USB;
1418     dc->vmsd = &vmstate_uhci;
1419     dc->props = uhci_properties;
1420 }
1421
1422 static TypeInfo ich9_uhci3_info = {
1423     .name          = "ich9-usb-uhci3",
1424     .parent        = TYPE_PCI_DEVICE,
1425     .instance_size = sizeof(UHCIState),
1426     .class_init    = ich9_uhci3_class_init,
1427 };
1428
1429 static void uhci_register_types(void)
1430 {
1431     type_register_static(&piix3_uhci_info);
1432     type_register_static(&piix4_uhci_info);
1433     type_register_static(&vt82c686b_uhci_info);
1434     type_register_static(&ich9_uhci1_info);
1435     type_register_static(&ich9_uhci2_info);
1436     type_register_static(&ich9_uhci3_info);
1437 }
1438
1439 type_init(uhci_register_types)