2 * QEMU System Emulator block driver
4 * Copyright (c) 2003 Fabrice Bellard
6 * Permission is hereby granted, free of charge, to any person obtaining a copy
7 * of this software and associated documentation files (the "Software"), to deal
8 * in the Software without restriction, including without limitation the rights
9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10 * copies of the Software, and to permit persons to whom the Software is
11 * furnished to do so, subject to the following conditions:
13 * The above copyright notice and this permission notice shall be included in
14 * all copies or substantial portions of the Software.
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
24 #include "config-host.h"
25 #include "qemu-common.h"
27 #include "monitor/monitor.h"
28 #include "block/block_int.h"
29 #include "block/blockjob.h"
30 #include "qemu/module.h"
31 #include "qapi/qmp/qjson.h"
32 #include "sysemu/sysemu.h"
33 #include "qemu/notify.h"
34 #include "block/coroutine.h"
35 #include "block/qapi.h"
36 #include "qmp-commands.h"
37 #include "qemu/timer.h"
40 #include <sys/types.h>
42 #include <sys/ioctl.h>
43 #include <sys/queue.h>
53 struct BdrvDirtyBitmap
{
55 QLIST_ENTRY(BdrvDirtyBitmap
) list
;
58 #define NOT_DONE 0x7fffffff /* used while emulated sync operation in progress */
60 static void bdrv_dev_change_media_cb(BlockDriverState
*bs
, bool load
);
61 static BlockDriverAIOCB
*bdrv_aio_readv_em(BlockDriverState
*bs
,
62 int64_t sector_num
, QEMUIOVector
*qiov
, int nb_sectors
,
63 BlockDriverCompletionFunc
*cb
, void *opaque
);
64 static BlockDriverAIOCB
*bdrv_aio_writev_em(BlockDriverState
*bs
,
65 int64_t sector_num
, QEMUIOVector
*qiov
, int nb_sectors
,
66 BlockDriverCompletionFunc
*cb
, void *opaque
);
67 static int coroutine_fn
bdrv_co_readv_em(BlockDriverState
*bs
,
68 int64_t sector_num
, int nb_sectors
,
70 static int coroutine_fn
bdrv_co_writev_em(BlockDriverState
*bs
,
71 int64_t sector_num
, int nb_sectors
,
73 static int coroutine_fn
bdrv_co_do_preadv(BlockDriverState
*bs
,
74 int64_t offset
, unsigned int bytes
, QEMUIOVector
*qiov
,
75 BdrvRequestFlags flags
);
76 static int coroutine_fn
bdrv_co_do_pwritev(BlockDriverState
*bs
,
77 int64_t offset
, unsigned int bytes
, QEMUIOVector
*qiov
,
78 BdrvRequestFlags flags
);
79 static BlockDriverAIOCB
*bdrv_co_aio_rw_vector(BlockDriverState
*bs
,
83 BdrvRequestFlags flags
,
84 BlockDriverCompletionFunc
*cb
,
87 static void coroutine_fn
bdrv_co_do_rw(void *opaque
);
88 static int coroutine_fn
bdrv_co_do_write_zeroes(BlockDriverState
*bs
,
89 int64_t sector_num
, int nb_sectors
, BdrvRequestFlags flags
);
91 static QTAILQ_HEAD(, BlockDriverState
) bdrv_states
=
92 QTAILQ_HEAD_INITIALIZER(bdrv_states
);
94 static QTAILQ_HEAD(, BlockDriverState
) graph_bdrv_states
=
95 QTAILQ_HEAD_INITIALIZER(graph_bdrv_states
);
97 static QLIST_HEAD(, BlockDriver
) bdrv_drivers
=
98 QLIST_HEAD_INITIALIZER(bdrv_drivers
);
100 /* If non-zero, use only whitelisted block drivers */
101 static int use_bdrv_whitelist
;
104 static int is_windows_drive_prefix(const char *filename
)
106 return (((filename
[0] >= 'a' && filename
[0] <= 'z') ||
107 (filename
[0] >= 'A' && filename
[0] <= 'Z')) &&
111 int is_windows_drive(const char *filename
)
113 if (is_windows_drive_prefix(filename
) &&
116 if (strstart(filename
, "\\\\.\\", NULL
) ||
117 strstart(filename
, "//./", NULL
))
123 /* throttling disk I/O limits */
124 void bdrv_set_io_limits(BlockDriverState
*bs
,
129 throttle_config(&bs
->throttle_state
, cfg
);
131 for (i
= 0; i
< 2; i
++) {
132 qemu_co_enter_next(&bs
->throttled_reqs
[i
]);
136 /* this function drain all the throttled IOs */
137 static bool bdrv_start_throttled_reqs(BlockDriverState
*bs
)
139 bool drained
= false;
140 bool enabled
= bs
->io_limits_enabled
;
143 bs
->io_limits_enabled
= false;
145 for (i
= 0; i
< 2; i
++) {
146 while (qemu_co_enter_next(&bs
->throttled_reqs
[i
])) {
151 bs
->io_limits_enabled
= enabled
;
156 void bdrv_io_limits_disable(BlockDriverState
*bs
)
158 bs
->io_limits_enabled
= false;
160 bdrv_start_throttled_reqs(bs
);
162 throttle_destroy(&bs
->throttle_state
);
165 static void bdrv_throttle_read_timer_cb(void *opaque
)
167 BlockDriverState
*bs
= opaque
;
168 qemu_co_enter_next(&bs
->throttled_reqs
[0]);
171 static void bdrv_throttle_write_timer_cb(void *opaque
)
173 BlockDriverState
*bs
= opaque
;
174 qemu_co_enter_next(&bs
->throttled_reqs
[1]);
177 /* should be called before bdrv_set_io_limits if a limit is set */
178 void bdrv_io_limits_enable(BlockDriverState
*bs
)
180 assert(!bs
->io_limits_enabled
);
181 throttle_init(&bs
->throttle_state
,
183 bdrv_throttle_read_timer_cb
,
184 bdrv_throttle_write_timer_cb
,
186 bs
->io_limits_enabled
= true;
189 /* This function makes an IO wait if needed
191 * @nb_sectors: the number of sectors of the IO
192 * @is_write: is the IO a write
194 static void bdrv_io_limits_intercept(BlockDriverState
*bs
,
198 /* does this io must wait */
199 bool must_wait
= throttle_schedule_timer(&bs
->throttle_state
, is_write
);
201 /* if must wait or any request of this type throttled queue the IO */
203 !qemu_co_queue_empty(&bs
->throttled_reqs
[is_write
])) {
204 qemu_co_queue_wait(&bs
->throttled_reqs
[is_write
]);
207 /* the IO will be executed, do the accounting */
208 throttle_account(&bs
->throttle_state
, is_write
, bytes
);
211 /* if the next request must wait -> do nothing */
212 if (throttle_schedule_timer(&bs
->throttle_state
, is_write
)) {
216 /* else queue next request for execution */
217 qemu_co_queue_next(&bs
->throttled_reqs
[is_write
]);
220 size_t bdrv_opt_mem_align(BlockDriverState
*bs
)
222 if (!bs
|| !bs
->drv
) {
223 /* 4k should be on the safe side */
227 return bs
->bl
.opt_mem_alignment
;
230 /* check if the path starts with "<protocol>:" */
231 static int path_has_protocol(const char *path
)
236 if (is_windows_drive(path
) ||
237 is_windows_drive_prefix(path
)) {
240 p
= path
+ strcspn(path
, ":/\\");
242 p
= path
+ strcspn(path
, ":/");
248 int path_is_absolute(const char *path
)
251 /* specific case for names like: "\\.\d:" */
252 if (is_windows_drive(path
) || is_windows_drive_prefix(path
)) {
255 return (*path
== '/' || *path
== '\\');
257 return (*path
== '/');
261 /* if filename is absolute, just copy it to dest. Otherwise, build a
262 path to it by considering it is relative to base_path. URL are
264 void path_combine(char *dest
, int dest_size
,
265 const char *base_path
,
266 const char *filename
)
273 if (path_is_absolute(filename
)) {
274 pstrcpy(dest
, dest_size
, filename
);
276 p
= strchr(base_path
, ':');
281 p1
= strrchr(base_path
, '/');
285 p2
= strrchr(base_path
, '\\');
297 if (len
> dest_size
- 1)
299 memcpy(dest
, base_path
, len
);
301 pstrcat(dest
, dest_size
, filename
);
305 void bdrv_get_full_backing_filename(BlockDriverState
*bs
, char *dest
, size_t sz
)
307 if (bs
->backing_file
[0] == '\0' || path_has_protocol(bs
->backing_file
)) {
308 pstrcpy(dest
, sz
, bs
->backing_file
);
310 path_combine(dest
, sz
, bs
->filename
, bs
->backing_file
);
314 void bdrv_register(BlockDriver
*bdrv
)
316 /* Block drivers without coroutine functions need emulation */
317 if (!bdrv
->bdrv_co_readv
) {
318 bdrv
->bdrv_co_readv
= bdrv_co_readv_em
;
319 bdrv
->bdrv_co_writev
= bdrv_co_writev_em
;
321 /* bdrv_co_readv_em()/brdv_co_writev_em() work in terms of aio, so if
322 * the block driver lacks aio we need to emulate that too.
324 if (!bdrv
->bdrv_aio_readv
) {
325 /* add AIO emulation layer */
326 bdrv
->bdrv_aio_readv
= bdrv_aio_readv_em
;
327 bdrv
->bdrv_aio_writev
= bdrv_aio_writev_em
;
331 QLIST_INSERT_HEAD(&bdrv_drivers
, bdrv
, list
);
334 /* create a new block device (by default it is empty) */
335 BlockDriverState
*bdrv_new(const char *device_name
, Error
**errp
)
337 BlockDriverState
*bs
;
339 if (bdrv_find(device_name
)) {
340 error_setg(errp
, "Device with id '%s' already exists",
344 if (bdrv_find_node(device_name
)) {
345 error_setg(errp
, "Device with node-name '%s' already exists",
350 bs
= g_malloc0(sizeof(BlockDriverState
));
351 QLIST_INIT(&bs
->dirty_bitmaps
);
352 pstrcpy(bs
->device_name
, sizeof(bs
->device_name
), device_name
);
353 if (device_name
[0] != '\0') {
354 QTAILQ_INSERT_TAIL(&bdrv_states
, bs
, device_list
);
356 bdrv_iostatus_disable(bs
);
357 notifier_list_init(&bs
->close_notifiers
);
358 notifier_with_return_list_init(&bs
->before_write_notifiers
);
359 qemu_co_queue_init(&bs
->throttled_reqs
[0]);
360 qemu_co_queue_init(&bs
->throttled_reqs
[1]);
366 void bdrv_add_close_notifier(BlockDriverState
*bs
, Notifier
*notify
)
368 notifier_list_add(&bs
->close_notifiers
, notify
);
371 BlockDriver
*bdrv_find_format(const char *format_name
)
374 QLIST_FOREACH(drv1
, &bdrv_drivers
, list
) {
375 if (!strcmp(drv1
->format_name
, format_name
)) {
382 static int bdrv_is_whitelisted(BlockDriver
*drv
, bool read_only
)
384 static const char *whitelist_rw
[] = {
385 CONFIG_BDRV_RW_WHITELIST
387 static const char *whitelist_ro
[] = {
388 CONFIG_BDRV_RO_WHITELIST
392 if (!whitelist_rw
[0] && !whitelist_ro
[0]) {
393 return 1; /* no whitelist, anything goes */
396 for (p
= whitelist_rw
; *p
; p
++) {
397 if (!strcmp(drv
->format_name
, *p
)) {
402 for (p
= whitelist_ro
; *p
; p
++) {
403 if (!strcmp(drv
->format_name
, *p
)) {
411 BlockDriver
*bdrv_find_whitelisted_format(const char *format_name
,
414 BlockDriver
*drv
= bdrv_find_format(format_name
);
415 return drv
&& bdrv_is_whitelisted(drv
, read_only
) ? drv
: NULL
;
418 typedef struct CreateCo
{
421 QEMUOptionParameter
*options
;
426 static void coroutine_fn
bdrv_create_co_entry(void *opaque
)
428 Error
*local_err
= NULL
;
431 CreateCo
*cco
= opaque
;
434 ret
= cco
->drv
->bdrv_create(cco
->filename
, cco
->options
, &local_err
);
436 error_propagate(&cco
->err
, local_err
);
441 int bdrv_create(BlockDriver
*drv
, const char* filename
,
442 QEMUOptionParameter
*options
, Error
**errp
)
449 .filename
= g_strdup(filename
),
455 if (!drv
->bdrv_create
) {
456 error_setg(errp
, "Driver '%s' does not support image creation", drv
->format_name
);
461 if (qemu_in_coroutine()) {
462 /* Fast-path if already in coroutine context */
463 bdrv_create_co_entry(&cco
);
465 co
= qemu_coroutine_create(bdrv_create_co_entry
);
466 qemu_coroutine_enter(co
, &cco
);
467 while (cco
.ret
== NOT_DONE
) {
475 error_propagate(errp
, cco
.err
);
477 error_setg_errno(errp
, -ret
, "Could not create image");
482 g_free(cco
.filename
);
486 int bdrv_create_file(const char* filename
, QEMUOptionParameter
*options
,
490 Error
*local_err
= NULL
;
493 drv
= bdrv_find_protocol(filename
, true);
495 error_setg(errp
, "Could not find protocol for file '%s'", filename
);
499 ret
= bdrv_create(drv
, filename
, options
, &local_err
);
501 error_propagate(errp
, local_err
);
506 int bdrv_refresh_limits(BlockDriverState
*bs
)
508 BlockDriver
*drv
= bs
->drv
;
510 memset(&bs
->bl
, 0, sizeof(bs
->bl
));
516 /* Take some limits from the children as a default */
518 bdrv_refresh_limits(bs
->file
);
519 bs
->bl
.opt_transfer_length
= bs
->file
->bl
.opt_transfer_length
;
520 bs
->bl
.opt_mem_alignment
= bs
->file
->bl
.opt_mem_alignment
;
522 bs
->bl
.opt_mem_alignment
= 512;
525 if (bs
->backing_hd
) {
526 bdrv_refresh_limits(bs
->backing_hd
);
527 bs
->bl
.opt_transfer_length
=
528 MAX(bs
->bl
.opt_transfer_length
,
529 bs
->backing_hd
->bl
.opt_transfer_length
);
530 bs
->bl
.opt_mem_alignment
=
531 MAX(bs
->bl
.opt_mem_alignment
,
532 bs
->backing_hd
->bl
.opt_mem_alignment
);
535 /* Then let the driver override it */
536 if (drv
->bdrv_refresh_limits
) {
537 return drv
->bdrv_refresh_limits(bs
);
544 * Create a uniquely-named empty temporary file.
545 * Return 0 upon success, otherwise a negative errno value.
547 int get_tmp_filename(char *filename
, int size
)
550 char temp_dir
[MAX_PATH
];
551 /* GetTempFileName requires that its output buffer (4th param)
552 have length MAX_PATH or greater. */
553 assert(size
>= MAX_PATH
);
554 return (GetTempPath(MAX_PATH
, temp_dir
)
555 && GetTempFileName(temp_dir
, "qem", 0, filename
)
556 ? 0 : -GetLastError());
560 tmpdir
= getenv("TMPDIR");
564 if (snprintf(filename
, size
, "%s/vl.XXXXXX", tmpdir
) >= size
) {
567 fd
= mkstemp(filename
);
571 if (close(fd
) != 0) {
580 * Detect host devices. By convention, /dev/cdrom[N] is always
581 * recognized as a host CDROM.
583 static BlockDriver
*find_hdev_driver(const char *filename
)
585 int score_max
= 0, score
;
586 BlockDriver
*drv
= NULL
, *d
;
588 QLIST_FOREACH(d
, &bdrv_drivers
, list
) {
589 if (d
->bdrv_probe_device
) {
590 score
= d
->bdrv_probe_device(filename
);
591 if (score
> score_max
) {
601 BlockDriver
*bdrv_find_protocol(const char *filename
,
602 bool allow_protocol_prefix
)
609 /* TODO Drivers without bdrv_file_open must be specified explicitly */
612 * XXX(hch): we really should not let host device detection
613 * override an explicit protocol specification, but moving this
614 * later breaks access to device names with colons in them.
615 * Thanks to the brain-dead persistent naming schemes on udev-
616 * based Linux systems those actually are quite common.
618 drv1
= find_hdev_driver(filename
);
623 if (!path_has_protocol(filename
) || !allow_protocol_prefix
) {
624 return bdrv_find_format("file");
627 p
= strchr(filename
, ':');
630 if (len
> sizeof(protocol
) - 1)
631 len
= sizeof(protocol
) - 1;
632 memcpy(protocol
, filename
, len
);
633 protocol
[len
] = '\0';
634 QLIST_FOREACH(drv1
, &bdrv_drivers
, list
) {
635 if (drv1
->protocol_name
&&
636 !strcmp(drv1
->protocol_name
, protocol
)) {
643 static int find_image_format(BlockDriverState
*bs
, const char *filename
,
644 BlockDriver
**pdrv
, Error
**errp
)
646 int score
, score_max
;
647 BlockDriver
*drv1
, *drv
;
651 /* Return the raw BlockDriver * to scsi-generic devices or empty drives */
652 if (bs
->sg
|| !bdrv_is_inserted(bs
) || bdrv_getlength(bs
) == 0) {
653 drv
= bdrv_find_format("raw");
655 error_setg(errp
, "Could not find raw image format");
662 ret
= bdrv_pread(bs
, 0, buf
, sizeof(buf
));
664 error_setg_errno(errp
, -ret
, "Could not read image for determining its "
672 QLIST_FOREACH(drv1
, &bdrv_drivers
, list
) {
673 if (drv1
->bdrv_probe
) {
674 score
= drv1
->bdrv_probe(buf
, ret
, filename
);
675 if (score
> score_max
) {
682 error_setg(errp
, "Could not determine image format: No compatible "
691 * Set the current 'total_sectors' value
693 static int refresh_total_sectors(BlockDriverState
*bs
, int64_t hint
)
695 BlockDriver
*drv
= bs
->drv
;
697 /* Do not attempt drv->bdrv_getlength() on scsi-generic devices */
701 /* query actual device if possible, otherwise just trust the hint */
702 if (drv
->bdrv_getlength
) {
703 int64_t length
= drv
->bdrv_getlength(bs
);
707 hint
= DIV_ROUND_UP(length
, BDRV_SECTOR_SIZE
);
710 bs
->total_sectors
= hint
;
715 * Set open flags for a given discard mode
717 * Return 0 on success, -1 if the discard mode was invalid.
719 int bdrv_parse_discard_flags(const char *mode
, int *flags
)
721 *flags
&= ~BDRV_O_UNMAP
;
723 if (!strcmp(mode
, "off") || !strcmp(mode
, "ignore")) {
725 } else if (!strcmp(mode
, "on") || !strcmp(mode
, "unmap")) {
726 *flags
|= BDRV_O_UNMAP
;
735 * Set open flags for a given cache mode
737 * Return 0 on success, -1 if the cache mode was invalid.
739 int bdrv_parse_cache_flags(const char *mode
, int *flags
)
741 *flags
&= ~BDRV_O_CACHE_MASK
;
743 if (!strcmp(mode
, "off") || !strcmp(mode
, "none")) {
744 *flags
|= BDRV_O_NOCACHE
| BDRV_O_CACHE_WB
;
745 } else if (!strcmp(mode
, "directsync")) {
746 *flags
|= BDRV_O_NOCACHE
;
747 } else if (!strcmp(mode
, "writeback")) {
748 *flags
|= BDRV_O_CACHE_WB
;
749 } else if (!strcmp(mode
, "unsafe")) {
750 *flags
|= BDRV_O_CACHE_WB
;
751 *flags
|= BDRV_O_NO_FLUSH
;
752 } else if (!strcmp(mode
, "writethrough")) {
753 /* this is the default */
762 * The copy-on-read flag is actually a reference count so multiple users may
763 * use the feature without worrying about clobbering its previous state.
764 * Copy-on-read stays enabled until all users have called to disable it.
766 void bdrv_enable_copy_on_read(BlockDriverState
*bs
)
771 void bdrv_disable_copy_on_read(BlockDriverState
*bs
)
773 assert(bs
->copy_on_read
> 0);
778 * Returns the flags that a temporary snapshot should get, based on the
779 * originally requested flags (the originally requested image will have flags
780 * like a backing file)
782 static int bdrv_temp_snapshot_flags(int flags
)
784 return (flags
& ~BDRV_O_SNAPSHOT
) | BDRV_O_TEMPORARY
;
788 * Returns the flags that bs->file should get, based on the given flags for
791 static int bdrv_inherited_flags(int flags
)
793 /* Enable protocol handling, disable format probing for bs->file */
794 flags
|= BDRV_O_PROTOCOL
;
796 /* Our block drivers take care to send flushes and respect unmap policy,
797 * so we can enable both unconditionally on lower layers. */
798 flags
|= BDRV_O_CACHE_WB
| BDRV_O_UNMAP
;
800 /* Clear flags that only apply to the top layer */
801 flags
&= ~(BDRV_O_SNAPSHOT
| BDRV_O_NO_BACKING
| BDRV_O_COPY_ON_READ
);
807 * Returns the flags that bs->backing_hd should get, based on the given flags
810 static int bdrv_backing_flags(int flags
)
812 /* backing files always opened read-only */
813 flags
&= ~(BDRV_O_RDWR
| BDRV_O_COPY_ON_READ
);
815 /* snapshot=on is handled on the top layer */
816 flags
&= ~(BDRV_O_SNAPSHOT
| BDRV_O_TEMPORARY
);
821 static int bdrv_open_flags(BlockDriverState
*bs
, int flags
)
823 int open_flags
= flags
| BDRV_O_CACHE_WB
;
826 * Clear flags that are internal to the block layer before opening the
829 open_flags
&= ~(BDRV_O_SNAPSHOT
| BDRV_O_NO_BACKING
);
832 * Snapshots should be writable.
834 if (flags
& BDRV_O_TEMPORARY
) {
835 open_flags
|= BDRV_O_RDWR
;
841 static void bdrv_assign_node_name(BlockDriverState
*bs
,
842 const char *node_name
,
849 /* empty string node name is invalid */
850 if (node_name
[0] == '\0') {
851 error_setg(errp
, "Empty node name");
855 /* takes care of avoiding namespaces collisions */
856 if (bdrv_find(node_name
)) {
857 error_setg(errp
, "node-name=%s is conflicting with a device id",
862 /* takes care of avoiding duplicates node names */
863 if (bdrv_find_node(node_name
)) {
864 error_setg(errp
, "Duplicate node name");
868 /* copy node name into the bs and insert it into the graph list */
869 pstrcpy(bs
->node_name
, sizeof(bs
->node_name
), node_name
);
870 QTAILQ_INSERT_TAIL(&graph_bdrv_states
, bs
, node_list
);
874 * Common part for opening disk images and files
876 * Removes all processed options from *options.
878 static int bdrv_open_common(BlockDriverState
*bs
, BlockDriverState
*file
,
879 QDict
*options
, int flags
, BlockDriver
*drv
, Error
**errp
)
882 const char *filename
;
883 const char *node_name
= NULL
;
884 Error
*local_err
= NULL
;
887 assert(bs
->file
== NULL
);
888 assert(options
!= NULL
&& bs
->options
!= options
);
891 filename
= file
->filename
;
893 filename
= qdict_get_try_str(options
, "filename");
896 if (drv
->bdrv_needs_filename
&& !filename
) {
897 error_setg(errp
, "The '%s' block driver requires a file name",
902 trace_bdrv_open_common(bs
, filename
?: "", flags
, drv
->format_name
);
904 node_name
= qdict_get_try_str(options
, "node-name");
905 bdrv_assign_node_name(bs
, node_name
, &local_err
);
907 error_propagate(errp
, local_err
);
910 qdict_del(options
, "node-name");
912 /* bdrv_open() with directly using a protocol as drv. This layer is already
913 * opened, so assign it to bs (while file becomes a closed BlockDriverState)
914 * and return immediately. */
915 if (file
!= NULL
&& drv
->bdrv_file_open
) {
920 bs
->open_flags
= flags
;
921 bs
->guest_block_size
= 512;
922 bs
->request_alignment
= 512;
923 bs
->zero_beyond_eof
= true;
924 open_flags
= bdrv_open_flags(bs
, flags
);
925 bs
->read_only
= !(open_flags
& BDRV_O_RDWR
);
927 if (use_bdrv_whitelist
&& !bdrv_is_whitelisted(drv
, bs
->read_only
)) {
929 !bs
->read_only
&& bdrv_is_whitelisted(drv
, true)
930 ? "Driver '%s' can only be used for read-only devices"
931 : "Driver '%s' is not whitelisted",
936 assert(bs
->copy_on_read
== 0); /* bdrv_new() and bdrv_close() make it so */
937 if (flags
& BDRV_O_COPY_ON_READ
) {
938 if (!bs
->read_only
) {
939 bdrv_enable_copy_on_read(bs
);
941 error_setg(errp
, "Can't use copy-on-read on read-only device");
946 if (filename
!= NULL
) {
947 pstrcpy(bs
->filename
, sizeof(bs
->filename
), filename
);
949 bs
->filename
[0] = '\0';
953 bs
->opaque
= g_malloc0(drv
->instance_size
);
955 bs
->enable_write_cache
= !!(flags
& BDRV_O_CACHE_WB
);
957 /* Open the image, either directly or using a protocol */
958 if (drv
->bdrv_file_open
) {
959 assert(file
== NULL
);
960 assert(!drv
->bdrv_needs_filename
|| filename
!= NULL
);
961 ret
= drv
->bdrv_file_open(bs
, options
, open_flags
, &local_err
);
964 error_setg(errp
, "Can't use '%s' as a block driver for the "
965 "protocol level", drv
->format_name
);
970 ret
= drv
->bdrv_open(bs
, options
, open_flags
, &local_err
);
975 error_propagate(errp
, local_err
);
976 } else if (bs
->filename
[0]) {
977 error_setg_errno(errp
, -ret
, "Could not open '%s'", bs
->filename
);
979 error_setg_errno(errp
, -ret
, "Could not open image");
984 ret
= refresh_total_sectors(bs
, bs
->total_sectors
);
986 error_setg_errno(errp
, -ret
, "Could not refresh total sector count");
990 bdrv_refresh_limits(bs
);
991 assert(bdrv_opt_mem_align(bs
) != 0);
992 assert((bs
->request_alignment
!= 0) || bs
->sg
);
1004 * Opens a file using a protocol (file, host_device, nbd, ...)
1006 * options is an indirect pointer to a QDict of options to pass to the block
1007 * drivers, or pointer to NULL for an empty set of options. If this function
1008 * takes ownership of the QDict reference, it will set *options to NULL;
1009 * otherwise, it will contain unused/unrecognized options after this function
1010 * returns. Then, the caller is responsible for freeing it. If it intends to
1011 * reuse the QDict, QINCREF() should be called beforehand.
1013 static int bdrv_file_open(BlockDriverState
*bs
, const char *filename
,
1014 QDict
**options
, int flags
, Error
**errp
)
1017 const char *drvname
;
1018 bool parse_filename
= false;
1019 Error
*local_err
= NULL
;
1022 /* Fetch the file name from the options QDict if necessary */
1024 filename
= qdict_get_try_str(*options
, "filename");
1025 } else if (filename
&& !qdict_haskey(*options
, "filename")) {
1026 qdict_put(*options
, "filename", qstring_from_str(filename
));
1027 parse_filename
= true;
1029 error_setg(errp
, "Can't specify 'file' and 'filename' options at the "
1035 /* Find the right block driver */
1036 drvname
= qdict_get_try_str(*options
, "driver");
1038 drv
= bdrv_find_format(drvname
);
1040 error_setg(errp
, "Unknown driver '%s'", drvname
);
1042 qdict_del(*options
, "driver");
1043 } else if (filename
) {
1044 drv
= bdrv_find_protocol(filename
, parse_filename
);
1046 error_setg(errp
, "Unknown protocol");
1049 error_setg(errp
, "Must specify either driver or file");
1054 /* errp has been set already */
1059 /* Parse the filename and open it */
1060 if (drv
->bdrv_parse_filename
&& parse_filename
) {
1061 drv
->bdrv_parse_filename(filename
, *options
, &local_err
);
1063 error_propagate(errp
, local_err
);
1068 if (!drv
->bdrv_needs_filename
) {
1069 qdict_del(*options
, "filename");
1071 filename
= qdict_get_str(*options
, "filename");
1075 if (!drv
->bdrv_file_open
) {
1076 ret
= bdrv_open(&bs
, filename
, NULL
, *options
, flags
, drv
, &local_err
);
1079 ret
= bdrv_open_common(bs
, NULL
, *options
, flags
, drv
, &local_err
);
1082 error_propagate(errp
, local_err
);
1094 * Opens the backing file for a BlockDriverState if not yet open
1096 * options is a QDict of options to pass to the block drivers, or NULL for an
1097 * empty set of options. The reference to the QDict is transferred to this
1098 * function (even on failure), so if the caller intends to reuse the dictionary,
1099 * it needs to use QINCREF() before calling bdrv_file_open.
1101 int bdrv_open_backing_file(BlockDriverState
*bs
, QDict
*options
, Error
**errp
)
1103 char *backing_filename
= g_malloc0(PATH_MAX
);
1105 BlockDriver
*back_drv
= NULL
;
1106 Error
*local_err
= NULL
;
1108 if (bs
->backing_hd
!= NULL
) {
1113 /* NULL means an empty set of options */
1114 if (options
== NULL
) {
1115 options
= qdict_new();
1118 bs
->open_flags
&= ~BDRV_O_NO_BACKING
;
1119 if (qdict_haskey(options
, "file.filename")) {
1120 backing_filename
[0] = '\0';
1121 } else if (bs
->backing_file
[0] == '\0' && qdict_size(options
) == 0) {
1125 bdrv_get_full_backing_filename(bs
, backing_filename
, PATH_MAX
);
1128 if (bs
->backing_format
[0] != '\0') {
1129 back_drv
= bdrv_find_format(bs
->backing_format
);
1132 assert(bs
->backing_hd
== NULL
);
1133 ret
= bdrv_open(&bs
->backing_hd
,
1134 *backing_filename
? backing_filename
: NULL
, NULL
, options
,
1135 bdrv_backing_flags(bs
->open_flags
), back_drv
, &local_err
);
1137 bs
->backing_hd
= NULL
;
1138 bs
->open_flags
|= BDRV_O_NO_BACKING
;
1139 error_setg(errp
, "Could not open backing file: %s",
1140 error_get_pretty(local_err
));
1141 error_free(local_err
);
1145 if (bs
->backing_hd
->file
) {
1146 pstrcpy(bs
->backing_file
, sizeof(bs
->backing_file
),
1147 bs
->backing_hd
->file
->filename
);
1150 /* Recalculate the BlockLimits with the backing file */
1151 bdrv_refresh_limits(bs
);
1154 g_free(backing_filename
);
1159 * Opens a disk image whose options are given as BlockdevRef in another block
1162 * If allow_none is true, no image will be opened if filename is false and no
1163 * BlockdevRef is given. *pbs will remain unchanged and 0 will be returned.
1165 * bdrev_key specifies the key for the image's BlockdevRef in the options QDict.
1166 * That QDict has to be flattened; therefore, if the BlockdevRef is a QDict
1167 * itself, all options starting with "${bdref_key}." are considered part of the
1170 * The BlockdevRef will be removed from the options QDict.
1172 * To conform with the behavior of bdrv_open(), *pbs has to be NULL.
1174 int bdrv_open_image(BlockDriverState
**pbs
, const char *filename
,
1175 QDict
*options
, const char *bdref_key
, int flags
,
1176 bool allow_none
, Error
**errp
)
1178 QDict
*image_options
;
1180 char *bdref_key_dot
;
1181 const char *reference
;
1184 assert(*pbs
== NULL
);
1186 bdref_key_dot
= g_strdup_printf("%s.", bdref_key
);
1187 qdict_extract_subqdict(options
, &image_options
, bdref_key_dot
);
1188 g_free(bdref_key_dot
);
1190 reference
= qdict_get_try_str(options
, bdref_key
);
1191 if (!filename
&& !reference
&& !qdict_size(image_options
)) {
1195 error_setg(errp
, "A block device must be specified for \"%s\"",
1202 ret
= bdrv_open(pbs
, filename
, reference
, image_options
, flags
, NULL
, errp
);
1205 qdict_del(options
, bdref_key
);
1209 void bdrv_append_temp_snapshot(BlockDriverState
*bs
, int flags
, Error
**errp
)
1211 /* TODO: extra byte is a hack to ensure MAX_PATH space on Windows. */
1212 char *tmp_filename
= g_malloc0(PATH_MAX
+ 1);
1214 BlockDriver
*bdrv_qcow2
;
1215 QEMUOptionParameter
*create_options
;
1216 QDict
*snapshot_options
;
1217 BlockDriverState
*bs_snapshot
;
1221 /* if snapshot, we create a temporary backing file and open it
1222 instead of opening 'filename' directly */
1224 /* Get the required size from the image */
1225 total_size
= bdrv_getlength(bs
);
1226 if (total_size
< 0) {
1227 error_setg_errno(errp
, -total_size
, "Could not get image size");
1230 total_size
&= BDRV_SECTOR_MASK
;
1232 /* Create the temporary image */
1233 ret
= get_tmp_filename(tmp_filename
, PATH_MAX
+ 1);
1235 error_setg_errno(errp
, -ret
, "Could not get temporary filename");
1239 bdrv_qcow2
= bdrv_find_format("qcow2");
1240 create_options
= parse_option_parameters("", bdrv_qcow2
->create_options
,
1243 set_option_parameter_int(create_options
, BLOCK_OPT_SIZE
, total_size
);
1245 ret
= bdrv_create(bdrv_qcow2
, tmp_filename
, create_options
, &local_err
);
1246 free_option_parameters(create_options
);
1248 error_setg_errno(errp
, -ret
, "Could not create temporary overlay "
1249 "'%s': %s", tmp_filename
,
1250 error_get_pretty(local_err
));
1251 error_free(local_err
);
1255 /* Prepare a new options QDict for the temporary file */
1256 snapshot_options
= qdict_new();
1257 qdict_put(snapshot_options
, "file.driver",
1258 qstring_from_str("file"));
1259 qdict_put(snapshot_options
, "file.filename",
1260 qstring_from_str(tmp_filename
));
1262 bs_snapshot
= bdrv_new("", &error_abort
);
1264 ret
= bdrv_open(&bs_snapshot
, NULL
, NULL
, snapshot_options
,
1265 flags
, bdrv_qcow2
, &local_err
);
1267 error_propagate(errp
, local_err
);
1271 bdrv_append(bs_snapshot
, bs
);
1274 g_free(tmp_filename
);
1278 * Opens a disk image (raw, qcow2, vmdk, ...)
1280 * options is a QDict of options to pass to the block drivers, or NULL for an
1281 * empty set of options. The reference to the QDict belongs to the block layer
1282 * after the call (even on failure), so if the caller intends to reuse the
1283 * dictionary, it needs to use QINCREF() before calling bdrv_open.
1285 * If *pbs is NULL, a new BDS will be created with a pointer to it stored there.
1286 * If it is not NULL, the referenced BDS will be reused.
1288 * The reference parameter may be used to specify an existing block device which
1289 * should be opened. If specified, neither options nor a filename may be given,
1290 * nor can an existing BDS be reused (that is, *pbs has to be NULL).
1292 int bdrv_open(BlockDriverState
**pbs
, const char *filename
,
1293 const char *reference
, QDict
*options
, int flags
,
1294 BlockDriver
*drv
, Error
**errp
)
1297 BlockDriverState
*file
= NULL
, *bs
;
1298 const char *drvname
;
1299 Error
*local_err
= NULL
;
1300 int snapshot_flags
= 0;
1305 bool options_non_empty
= options
? qdict_size(options
) : false;
1309 error_setg(errp
, "Cannot reuse an existing BDS when referencing "
1310 "another block device");
1314 if (filename
|| options_non_empty
) {
1315 error_setg(errp
, "Cannot reference an existing block device with "
1316 "additional options or a new filename");
1320 bs
= bdrv_lookup_bs(reference
, reference
, errp
);
1332 bs
= bdrv_new("", &error_abort
);
1335 /* NULL means an empty set of options */
1336 if (options
== NULL
) {
1337 options
= qdict_new();
1340 bs
->options
= options
;
1341 options
= qdict_clone_shallow(options
);
1343 if (flags
& BDRV_O_PROTOCOL
) {
1345 ret
= bdrv_file_open(bs
, filename
, &options
, flags
& ~BDRV_O_PROTOCOL
,
1350 } else if (bs
->drv
) {
1351 goto close_and_fail
;
1357 /* Open image file without format layer */
1358 if (flags
& BDRV_O_RDWR
) {
1359 flags
|= BDRV_O_ALLOW_RDWR
;
1361 if (flags
& BDRV_O_SNAPSHOT
) {
1362 snapshot_flags
= bdrv_temp_snapshot_flags(flags
);
1363 flags
= bdrv_backing_flags(flags
);
1366 assert(file
== NULL
);
1367 ret
= bdrv_open_image(&file
, filename
, options
, "file",
1368 bdrv_inherited_flags(flags
),
1374 /* Find the right image format driver */
1375 drvname
= qdict_get_try_str(options
, "driver");
1377 drv
= bdrv_find_format(drvname
);
1378 qdict_del(options
, "driver");
1380 error_setg(errp
, "Invalid driver: '%s'", drvname
);
1388 ret
= find_image_format(file
, filename
, &drv
, &local_err
);
1390 error_setg(errp
, "Must specify either driver or file");
1400 /* Open the image */
1401 ret
= bdrv_open_common(bs
, file
, options
, flags
, drv
, &local_err
);
1406 if (file
&& (bs
->file
!= file
)) {
1411 /* If there is a backing file, use it */
1412 if ((flags
& BDRV_O_NO_BACKING
) == 0) {
1413 QDict
*backing_options
;
1415 qdict_extract_subqdict(options
, &backing_options
, "backing.");
1416 ret
= bdrv_open_backing_file(bs
, backing_options
, &local_err
);
1418 goto close_and_fail
;
1422 /* For snapshot=on, create a temporary qcow2 overlay. bs points to the
1423 * temporary snapshot afterwards. */
1424 if (snapshot_flags
) {
1425 bdrv_append_temp_snapshot(bs
, snapshot_flags
, &local_err
);
1427 error_propagate(errp
, local_err
);
1428 goto close_and_fail
;
1434 /* Check if any unknown options were used */
1435 if (options
&& (qdict_size(options
) != 0)) {
1436 const QDictEntry
*entry
= qdict_first(options
);
1437 if (flags
& BDRV_O_PROTOCOL
) {
1438 error_setg(errp
, "Block protocol '%s' doesn't support the option "
1439 "'%s'", drv
->format_name
, entry
->key
);
1441 error_setg(errp
, "Block format '%s' used by device '%s' doesn't "
1442 "support the option '%s'", drv
->format_name
,
1443 bs
->device_name
, entry
->key
);
1447 goto close_and_fail
;
1450 if (!bdrv_key_required(bs
)) {
1451 bdrv_dev_change_media_cb(bs
, true);
1452 } else if (!runstate_check(RUN_STATE_PRELAUNCH
)
1453 && !runstate_check(RUN_STATE_INMIGRATE
)
1454 && !runstate_check(RUN_STATE_PAUSED
)) { /* HACK */
1456 "Guest must be stopped for opening of encrypted image");
1458 goto close_and_fail
;
1469 QDECREF(bs
->options
);
1473 /* If *pbs is NULL, a new BDS has been created in this function and
1474 needs to be freed now. Otherwise, it does not need to be closed,
1475 since it has not really been opened yet. */
1479 error_propagate(errp
, local_err
);
1484 /* See fail path, but now the BDS has to be always closed */
1492 error_propagate(errp
, local_err
);
1497 typedef struct BlockReopenQueueEntry
{
1499 BDRVReopenState state
;
1500 QSIMPLEQ_ENTRY(BlockReopenQueueEntry
) entry
;
1501 } BlockReopenQueueEntry
;
1504 * Adds a BlockDriverState to a simple queue for an atomic, transactional
1505 * reopen of multiple devices.
1507 * bs_queue can either be an existing BlockReopenQueue that has had QSIMPLE_INIT
1508 * already performed, or alternatively may be NULL a new BlockReopenQueue will
1509 * be created and initialized. This newly created BlockReopenQueue should be
1510 * passed back in for subsequent calls that are intended to be of the same
1513 * bs is the BlockDriverState to add to the reopen queue.
1515 * flags contains the open flags for the associated bs
1517 * returns a pointer to bs_queue, which is either the newly allocated
1518 * bs_queue, or the existing bs_queue being used.
1521 BlockReopenQueue
*bdrv_reopen_queue(BlockReopenQueue
*bs_queue
,
1522 BlockDriverState
*bs
, int flags
)
1526 BlockReopenQueueEntry
*bs_entry
;
1527 if (bs_queue
== NULL
) {
1528 bs_queue
= g_new0(BlockReopenQueue
, 1);
1529 QSIMPLEQ_INIT(bs_queue
);
1532 /* bdrv_open() masks this flag out */
1533 flags
&= ~BDRV_O_PROTOCOL
;
1536 bdrv_reopen_queue(bs_queue
, bs
->file
, bdrv_inherited_flags(flags
));
1539 bs_entry
= g_new0(BlockReopenQueueEntry
, 1);
1540 QSIMPLEQ_INSERT_TAIL(bs_queue
, bs_entry
, entry
);
1542 bs_entry
->state
.bs
= bs
;
1543 bs_entry
->state
.flags
= flags
;
1549 * Reopen multiple BlockDriverStates atomically & transactionally.
1551 * The queue passed in (bs_queue) must have been built up previous
1552 * via bdrv_reopen_queue().
1554 * Reopens all BDS specified in the queue, with the appropriate
1555 * flags. All devices are prepared for reopen, and failure of any
1556 * device will cause all device changes to be abandonded, and intermediate
1559 * If all devices prepare successfully, then the changes are committed
1563 int bdrv_reopen_multiple(BlockReopenQueue
*bs_queue
, Error
**errp
)
1566 BlockReopenQueueEntry
*bs_entry
, *next
;
1567 Error
*local_err
= NULL
;
1569 assert(bs_queue
!= NULL
);
1573 QSIMPLEQ_FOREACH(bs_entry
, bs_queue
, entry
) {
1574 if (bdrv_reopen_prepare(&bs_entry
->state
, bs_queue
, &local_err
)) {
1575 error_propagate(errp
, local_err
);
1578 bs_entry
->prepared
= true;
1581 /* If we reach this point, we have success and just need to apply the
1584 QSIMPLEQ_FOREACH(bs_entry
, bs_queue
, entry
) {
1585 bdrv_reopen_commit(&bs_entry
->state
);
1591 QSIMPLEQ_FOREACH_SAFE(bs_entry
, bs_queue
, entry
, next
) {
1592 if (ret
&& bs_entry
->prepared
) {
1593 bdrv_reopen_abort(&bs_entry
->state
);
1602 /* Reopen a single BlockDriverState with the specified flags. */
1603 int bdrv_reopen(BlockDriverState
*bs
, int bdrv_flags
, Error
**errp
)
1606 Error
*local_err
= NULL
;
1607 BlockReopenQueue
*queue
= bdrv_reopen_queue(NULL
, bs
, bdrv_flags
);
1609 ret
= bdrv_reopen_multiple(queue
, &local_err
);
1610 if (local_err
!= NULL
) {
1611 error_propagate(errp
, local_err
);
1618 * Prepares a BlockDriverState for reopen. All changes are staged in the
1619 * 'opaque' field of the BDRVReopenState, which is used and allocated by
1620 * the block driver layer .bdrv_reopen_prepare()
1622 * bs is the BlockDriverState to reopen
1623 * flags are the new open flags
1624 * queue is the reopen queue
1626 * Returns 0 on success, non-zero on error. On error errp will be set
1629 * On failure, bdrv_reopen_abort() will be called to clean up any data.
1630 * It is the responsibility of the caller to then call the abort() or
1631 * commit() for any other BDS that have been left in a prepare() state
1634 int bdrv_reopen_prepare(BDRVReopenState
*reopen_state
, BlockReopenQueue
*queue
,
1638 Error
*local_err
= NULL
;
1641 assert(reopen_state
!= NULL
);
1642 assert(reopen_state
->bs
->drv
!= NULL
);
1643 drv
= reopen_state
->bs
->drv
;
1645 /* if we are to stay read-only, do not allow permission change
1647 if (!(reopen_state
->bs
->open_flags
& BDRV_O_ALLOW_RDWR
) &&
1648 reopen_state
->flags
& BDRV_O_RDWR
) {
1649 error_set(errp
, QERR_DEVICE_IS_READ_ONLY
,
1650 reopen_state
->bs
->device_name
);
1655 ret
= bdrv_flush(reopen_state
->bs
);
1657 error_set(errp
, ERROR_CLASS_GENERIC_ERROR
, "Error (%s) flushing drive",
1662 if (drv
->bdrv_reopen_prepare
) {
1663 ret
= drv
->bdrv_reopen_prepare(reopen_state
, queue
, &local_err
);
1665 if (local_err
!= NULL
) {
1666 error_propagate(errp
, local_err
);
1668 error_setg(errp
, "failed while preparing to reopen image '%s'",
1669 reopen_state
->bs
->filename
);
1674 /* It is currently mandatory to have a bdrv_reopen_prepare()
1675 * handler for each supported drv. */
1676 error_set(errp
, QERR_BLOCK_FORMAT_FEATURE_NOT_SUPPORTED
,
1677 drv
->format_name
, reopen_state
->bs
->device_name
,
1678 "reopening of file");
1690 * Takes the staged changes for the reopen from bdrv_reopen_prepare(), and
1691 * makes them final by swapping the staging BlockDriverState contents into
1692 * the active BlockDriverState contents.
1694 void bdrv_reopen_commit(BDRVReopenState
*reopen_state
)
1698 assert(reopen_state
!= NULL
);
1699 drv
= reopen_state
->bs
->drv
;
1700 assert(drv
!= NULL
);
1702 /* If there are any driver level actions to take */
1703 if (drv
->bdrv_reopen_commit
) {
1704 drv
->bdrv_reopen_commit(reopen_state
);
1707 /* set BDS specific flags now */
1708 reopen_state
->bs
->open_flags
= reopen_state
->flags
;
1709 reopen_state
->bs
->enable_write_cache
= !!(reopen_state
->flags
&
1711 reopen_state
->bs
->read_only
= !(reopen_state
->flags
& BDRV_O_RDWR
);
1713 bdrv_refresh_limits(reopen_state
->bs
);
1717 * Abort the reopen, and delete and free the staged changes in
1720 void bdrv_reopen_abort(BDRVReopenState
*reopen_state
)
1724 assert(reopen_state
!= NULL
);
1725 drv
= reopen_state
->bs
->drv
;
1726 assert(drv
!= NULL
);
1728 if (drv
->bdrv_reopen_abort
) {
1729 drv
->bdrv_reopen_abort(reopen_state
);
1734 void bdrv_close(BlockDriverState
*bs
)
1737 block_job_cancel_sync(bs
->job
);
1739 bdrv_drain_all(); /* complete I/O */
1741 bdrv_drain_all(); /* in case flush left pending I/O */
1742 notifier_list_notify(&bs
->close_notifiers
, bs
);
1745 if (bs
->backing_hd
) {
1746 bdrv_unref(bs
->backing_hd
);
1747 bs
->backing_hd
= NULL
;
1749 bs
->drv
->bdrv_close(bs
);
1753 bs
->copy_on_read
= 0;
1754 bs
->backing_file
[0] = '\0';
1755 bs
->backing_format
[0] = '\0';
1756 bs
->total_sectors
= 0;
1761 bs
->zero_beyond_eof
= false;
1762 QDECREF(bs
->options
);
1765 if (bs
->file
!= NULL
) {
1766 bdrv_unref(bs
->file
);
1771 bdrv_dev_change_media_cb(bs
, false);
1773 /*throttling disk I/O limits*/
1774 if (bs
->io_limits_enabled
) {
1775 bdrv_io_limits_disable(bs
);
1779 void bdrv_close_all(void)
1781 BlockDriverState
*bs
;
1783 QTAILQ_FOREACH(bs
, &bdrv_states
, device_list
) {
1788 /* Check if any requests are in-flight (including throttled requests) */
1789 static bool bdrv_requests_pending(BlockDriverState
*bs
)
1791 if (!QLIST_EMPTY(&bs
->tracked_requests
)) {
1794 if (!qemu_co_queue_empty(&bs
->throttled_reqs
[0])) {
1797 if (!qemu_co_queue_empty(&bs
->throttled_reqs
[1])) {
1800 if (bs
->file
&& bdrv_requests_pending(bs
->file
)) {
1803 if (bs
->backing_hd
&& bdrv_requests_pending(bs
->backing_hd
)) {
1809 static bool bdrv_requests_pending_all(void)
1811 BlockDriverState
*bs
;
1812 QTAILQ_FOREACH(bs
, &bdrv_states
, device_list
) {
1813 if (bdrv_requests_pending(bs
)) {
1821 * Wait for pending requests to complete across all BlockDriverStates
1823 * This function does not flush data to disk, use bdrv_flush_all() for that
1824 * after calling this function.
1826 * Note that completion of an asynchronous I/O operation can trigger any
1827 * number of other I/O operations on other devices---for example a coroutine
1828 * can be arbitrarily complex and a constant flow of I/O can come until the
1829 * coroutine is complete. Because of this, it is not possible to have a
1830 * function to drain a single device's I/O queue.
1832 void bdrv_drain_all(void)
1834 /* Always run first iteration so any pending completion BHs run */
1836 BlockDriverState
*bs
;
1839 QTAILQ_FOREACH(bs
, &bdrv_states
, device_list
) {
1840 bdrv_start_throttled_reqs(bs
);
1843 busy
= bdrv_requests_pending_all();
1844 busy
|= aio_poll(qemu_get_aio_context(), busy
);
1848 /* make a BlockDriverState anonymous by removing from bdrv_state and
1849 * graph_bdrv_state list.
1850 Also, NULL terminate the device_name to prevent double remove */
1851 void bdrv_make_anon(BlockDriverState
*bs
)
1853 if (bs
->device_name
[0] != '\0') {
1854 QTAILQ_REMOVE(&bdrv_states
, bs
, device_list
);
1856 bs
->device_name
[0] = '\0';
1857 if (bs
->node_name
[0] != '\0') {
1858 QTAILQ_REMOVE(&graph_bdrv_states
, bs
, node_list
);
1860 bs
->node_name
[0] = '\0';
1863 static void bdrv_rebind(BlockDriverState
*bs
)
1865 if (bs
->drv
&& bs
->drv
->bdrv_rebind
) {
1866 bs
->drv
->bdrv_rebind(bs
);
1870 static void bdrv_move_feature_fields(BlockDriverState
*bs_dest
,
1871 BlockDriverState
*bs_src
)
1873 /* move some fields that need to stay attached to the device */
1876 bs_dest
->dev_ops
= bs_src
->dev_ops
;
1877 bs_dest
->dev_opaque
= bs_src
->dev_opaque
;
1878 bs_dest
->dev
= bs_src
->dev
;
1879 bs_dest
->guest_block_size
= bs_src
->guest_block_size
;
1880 bs_dest
->copy_on_read
= bs_src
->copy_on_read
;
1882 bs_dest
->enable_write_cache
= bs_src
->enable_write_cache
;
1884 /* i/o throttled req */
1885 memcpy(&bs_dest
->throttle_state
,
1886 &bs_src
->throttle_state
,
1887 sizeof(ThrottleState
));
1888 bs_dest
->throttled_reqs
[0] = bs_src
->throttled_reqs
[0];
1889 bs_dest
->throttled_reqs
[1] = bs_src
->throttled_reqs
[1];
1890 bs_dest
->io_limits_enabled
= bs_src
->io_limits_enabled
;
1893 bs_dest
->on_read_error
= bs_src
->on_read_error
;
1894 bs_dest
->on_write_error
= bs_src
->on_write_error
;
1897 bs_dest
->iostatus_enabled
= bs_src
->iostatus_enabled
;
1898 bs_dest
->iostatus
= bs_src
->iostatus
;
1901 bs_dest
->dirty_bitmaps
= bs_src
->dirty_bitmaps
;
1903 /* reference count */
1904 bs_dest
->refcnt
= bs_src
->refcnt
;
1907 bs_dest
->in_use
= bs_src
->in_use
;
1908 bs_dest
->job
= bs_src
->job
;
1910 /* keep the same entry in bdrv_states */
1911 pstrcpy(bs_dest
->device_name
, sizeof(bs_dest
->device_name
),
1912 bs_src
->device_name
);
1913 bs_dest
->device_list
= bs_src
->device_list
;
1917 * Swap bs contents for two image chains while they are live,
1918 * while keeping required fields on the BlockDriverState that is
1919 * actually attached to a device.
1921 * This will modify the BlockDriverState fields, and swap contents
1922 * between bs_new and bs_old. Both bs_new and bs_old are modified.
1924 * bs_new is required to be anonymous.
1926 * This function does not create any image files.
1928 void bdrv_swap(BlockDriverState
*bs_new
, BlockDriverState
*bs_old
)
1930 BlockDriverState tmp
;
1932 /* The code needs to swap the node_name but simply swapping node_list won't
1933 * work so first remove the nodes from the graph list, do the swap then
1934 * insert them back if needed.
1936 if (bs_new
->node_name
[0] != '\0') {
1937 QTAILQ_REMOVE(&graph_bdrv_states
, bs_new
, node_list
);
1939 if (bs_old
->node_name
[0] != '\0') {
1940 QTAILQ_REMOVE(&graph_bdrv_states
, bs_old
, node_list
);
1943 /* bs_new must be anonymous and shouldn't have anything fancy enabled */
1944 assert(bs_new
->device_name
[0] == '\0');
1945 assert(QLIST_EMPTY(&bs_new
->dirty_bitmaps
));
1946 assert(bs_new
->job
== NULL
);
1947 assert(bs_new
->dev
== NULL
);
1948 assert(bs_new
->in_use
== 0);
1949 assert(bs_new
->io_limits_enabled
== false);
1950 assert(!throttle_have_timer(&bs_new
->throttle_state
));
1956 /* there are some fields that should not be swapped, move them back */
1957 bdrv_move_feature_fields(&tmp
, bs_old
);
1958 bdrv_move_feature_fields(bs_old
, bs_new
);
1959 bdrv_move_feature_fields(bs_new
, &tmp
);
1961 /* bs_new shouldn't be in bdrv_states even after the swap! */
1962 assert(bs_new
->device_name
[0] == '\0');
1964 /* Check a few fields that should remain attached to the device */
1965 assert(bs_new
->dev
== NULL
);
1966 assert(bs_new
->job
== NULL
);
1967 assert(bs_new
->in_use
== 0);
1968 assert(bs_new
->io_limits_enabled
== false);
1969 assert(!throttle_have_timer(&bs_new
->throttle_state
));
1971 /* insert the nodes back into the graph node list if needed */
1972 if (bs_new
->node_name
[0] != '\0') {
1973 QTAILQ_INSERT_TAIL(&graph_bdrv_states
, bs_new
, node_list
);
1975 if (bs_old
->node_name
[0] != '\0') {
1976 QTAILQ_INSERT_TAIL(&graph_bdrv_states
, bs_old
, node_list
);
1979 bdrv_rebind(bs_new
);
1980 bdrv_rebind(bs_old
);
1984 * Add new bs contents at the top of an image chain while the chain is
1985 * live, while keeping required fields on the top layer.
1987 * This will modify the BlockDriverState fields, and swap contents
1988 * between bs_new and bs_top. Both bs_new and bs_top are modified.
1990 * bs_new is required to be anonymous.
1992 * This function does not create any image files.
1994 void bdrv_append(BlockDriverState
*bs_new
, BlockDriverState
*bs_top
)
1996 bdrv_swap(bs_new
, bs_top
);
1998 /* The contents of 'tmp' will become bs_top, as we are
1999 * swapping bs_new and bs_top contents. */
2000 bs_top
->backing_hd
= bs_new
;
2001 bs_top
->open_flags
&= ~BDRV_O_NO_BACKING
;
2002 pstrcpy(bs_top
->backing_file
, sizeof(bs_top
->backing_file
),
2004 pstrcpy(bs_top
->backing_format
, sizeof(bs_top
->backing_format
),
2005 bs_new
->drv
? bs_new
->drv
->format_name
: "");
2008 static void bdrv_delete(BlockDriverState
*bs
)
2012 assert(!bs
->in_use
);
2013 assert(!bs
->refcnt
);
2014 assert(QLIST_EMPTY(&bs
->dirty_bitmaps
));
2018 /* remove from list, if necessary */
2024 int bdrv_attach_dev(BlockDriverState
*bs
, void *dev
)
2025 /* TODO change to DeviceState *dev when all users are qdevified */
2031 bdrv_iostatus_reset(bs
);
2035 /* TODO qdevified devices don't use this, remove when devices are qdevified */
2036 void bdrv_attach_dev_nofail(BlockDriverState
*bs
, void *dev
)
2038 if (bdrv_attach_dev(bs
, dev
) < 0) {
2043 void bdrv_detach_dev(BlockDriverState
*bs
, void *dev
)
2044 /* TODO change to DeviceState *dev when all users are qdevified */
2046 assert(bs
->dev
== dev
);
2049 bs
->dev_opaque
= NULL
;
2050 bs
->guest_block_size
= 512;
2053 /* TODO change to return DeviceState * when all users are qdevified */
2054 void *bdrv_get_attached_dev(BlockDriverState
*bs
)
2059 void bdrv_set_dev_ops(BlockDriverState
*bs
, const BlockDevOps
*ops
,
2063 bs
->dev_opaque
= opaque
;
2066 void bdrv_emit_qmp_error_event(const BlockDriverState
*bdrv
,
2067 enum MonitorEvent ev
,
2068 BlockErrorAction action
, bool is_read
)
2071 const char *action_str
;
2074 case BDRV_ACTION_REPORT
:
2075 action_str
= "report";
2077 case BDRV_ACTION_IGNORE
:
2078 action_str
= "ignore";
2080 case BDRV_ACTION_STOP
:
2081 action_str
= "stop";
2087 data
= qobject_from_jsonf("{ 'device': %s, 'action': %s, 'operation': %s }",
2090 is_read
? "read" : "write");
2091 monitor_protocol_event(ev
, data
);
2093 qobject_decref(data
);
2096 static void bdrv_emit_qmp_eject_event(BlockDriverState
*bs
, bool ejected
)
2100 data
= qobject_from_jsonf("{ 'device': %s, 'tray-open': %i }",
2101 bdrv_get_device_name(bs
), ejected
);
2102 monitor_protocol_event(QEVENT_DEVICE_TRAY_MOVED
, data
);
2104 qobject_decref(data
);
2107 static void bdrv_dev_change_media_cb(BlockDriverState
*bs
, bool load
)
2109 if (bs
->dev_ops
&& bs
->dev_ops
->change_media_cb
) {
2110 bool tray_was_closed
= !bdrv_dev_is_tray_open(bs
);
2111 bs
->dev_ops
->change_media_cb(bs
->dev_opaque
, load
);
2112 if (tray_was_closed
) {
2114 bdrv_emit_qmp_eject_event(bs
, true);
2118 bdrv_emit_qmp_eject_event(bs
, false);
2123 bool bdrv_dev_has_removable_media(BlockDriverState
*bs
)
2125 return !bs
->dev
|| (bs
->dev_ops
&& bs
->dev_ops
->change_media_cb
);
2128 void bdrv_dev_eject_request(BlockDriverState
*bs
, bool force
)
2130 if (bs
->dev_ops
&& bs
->dev_ops
->eject_request_cb
) {
2131 bs
->dev_ops
->eject_request_cb(bs
->dev_opaque
, force
);
2135 bool bdrv_dev_is_tray_open(BlockDriverState
*bs
)
2137 if (bs
->dev_ops
&& bs
->dev_ops
->is_tray_open
) {
2138 return bs
->dev_ops
->is_tray_open(bs
->dev_opaque
);
2143 static void bdrv_dev_resize_cb(BlockDriverState
*bs
)
2145 if (bs
->dev_ops
&& bs
->dev_ops
->resize_cb
) {
2146 bs
->dev_ops
->resize_cb(bs
->dev_opaque
);
2150 bool bdrv_dev_is_medium_locked(BlockDriverState
*bs
)
2152 if (bs
->dev_ops
&& bs
->dev_ops
->is_medium_locked
) {
2153 return bs
->dev_ops
->is_medium_locked(bs
->dev_opaque
);
2159 * Run consistency checks on an image
2161 * Returns 0 if the check could be completed (it doesn't mean that the image is
2162 * free of errors) or -errno when an internal error occurred. The results of the
2163 * check are stored in res.
2165 int bdrv_check(BlockDriverState
*bs
, BdrvCheckResult
*res
, BdrvCheckMode fix
)
2167 if (bs
->drv
->bdrv_check
== NULL
) {
2171 memset(res
, 0, sizeof(*res
));
2172 return bs
->drv
->bdrv_check(bs
, res
, fix
);
2175 #define COMMIT_BUF_SECTORS 2048
2177 /* commit COW file into the raw image */
2178 int bdrv_commit(BlockDriverState
*bs
)
2180 BlockDriver
*drv
= bs
->drv
;
2181 int64_t sector
, total_sectors
, length
, backing_length
;
2182 int n
, ro
, open_flags
;
2184 uint8_t *buf
= NULL
;
2185 char filename
[PATH_MAX
];
2190 if (!bs
->backing_hd
) {
2194 if (bdrv_in_use(bs
) || bdrv_in_use(bs
->backing_hd
)) {
2198 ro
= bs
->backing_hd
->read_only
;
2199 /* Use pstrcpy (not strncpy): filename must be NUL-terminated. */
2200 pstrcpy(filename
, sizeof(filename
), bs
->backing_hd
->filename
);
2201 open_flags
= bs
->backing_hd
->open_flags
;
2204 if (bdrv_reopen(bs
->backing_hd
, open_flags
| BDRV_O_RDWR
, NULL
)) {
2209 length
= bdrv_getlength(bs
);
2215 backing_length
= bdrv_getlength(bs
->backing_hd
);
2216 if (backing_length
< 0) {
2217 ret
= backing_length
;
2221 /* If our top snapshot is larger than the backing file image,
2222 * grow the backing file image if possible. If not possible,
2223 * we must return an error */
2224 if (length
> backing_length
) {
2225 ret
= bdrv_truncate(bs
->backing_hd
, length
);
2231 total_sectors
= length
>> BDRV_SECTOR_BITS
;
2232 buf
= g_malloc(COMMIT_BUF_SECTORS
* BDRV_SECTOR_SIZE
);
2234 for (sector
= 0; sector
< total_sectors
; sector
+= n
) {
2235 ret
= bdrv_is_allocated(bs
, sector
, COMMIT_BUF_SECTORS
, &n
);
2240 ret
= bdrv_read(bs
, sector
, buf
, n
);
2245 ret
= bdrv_write(bs
->backing_hd
, sector
, buf
, n
);
2252 if (drv
->bdrv_make_empty
) {
2253 ret
= drv
->bdrv_make_empty(bs
);
2261 * Make sure all data we wrote to the backing device is actually
2264 if (bs
->backing_hd
) {
2265 bdrv_flush(bs
->backing_hd
);
2273 /* ignoring error return here */
2274 bdrv_reopen(bs
->backing_hd
, open_flags
& ~BDRV_O_RDWR
, NULL
);
2280 int bdrv_commit_all(void)
2282 BlockDriverState
*bs
;
2284 QTAILQ_FOREACH(bs
, &bdrv_states
, device_list
) {
2285 if (bs
->drv
&& bs
->backing_hd
) {
2286 int ret
= bdrv_commit(bs
);
2296 * Remove an active request from the tracked requests list
2298 * This function should be called when a tracked request is completing.
2300 static void tracked_request_end(BdrvTrackedRequest
*req
)
2302 if (req
->serialising
) {
2303 req
->bs
->serialising_in_flight
--;
2306 QLIST_REMOVE(req
, list
);
2307 qemu_co_queue_restart_all(&req
->wait_queue
);
2311 * Add an active request to the tracked requests list
2313 static void tracked_request_begin(BdrvTrackedRequest
*req
,
2314 BlockDriverState
*bs
,
2316 unsigned int bytes
, bool is_write
)
2318 *req
= (BdrvTrackedRequest
){
2322 .is_write
= is_write
,
2323 .co
= qemu_coroutine_self(),
2324 .serialising
= false,
2325 .overlap_offset
= offset
,
2326 .overlap_bytes
= bytes
,
2329 qemu_co_queue_init(&req
->wait_queue
);
2331 QLIST_INSERT_HEAD(&bs
->tracked_requests
, req
, list
);
2334 static void mark_request_serialising(BdrvTrackedRequest
*req
, uint64_t align
)
2336 int64_t overlap_offset
= req
->offset
& ~(align
- 1);
2337 unsigned int overlap_bytes
= ROUND_UP(req
->offset
+ req
->bytes
, align
)
2340 if (!req
->serialising
) {
2341 req
->bs
->serialising_in_flight
++;
2342 req
->serialising
= true;
2345 req
->overlap_offset
= MIN(req
->overlap_offset
, overlap_offset
);
2346 req
->overlap_bytes
= MAX(req
->overlap_bytes
, overlap_bytes
);
2350 * Round a region to cluster boundaries
2352 void bdrv_round_to_clusters(BlockDriverState
*bs
,
2353 int64_t sector_num
, int nb_sectors
,
2354 int64_t *cluster_sector_num
,
2355 int *cluster_nb_sectors
)
2357 BlockDriverInfo bdi
;
2359 if (bdrv_get_info(bs
, &bdi
) < 0 || bdi
.cluster_size
== 0) {
2360 *cluster_sector_num
= sector_num
;
2361 *cluster_nb_sectors
= nb_sectors
;
2363 int64_t c
= bdi
.cluster_size
/ BDRV_SECTOR_SIZE
;
2364 *cluster_sector_num
= QEMU_ALIGN_DOWN(sector_num
, c
);
2365 *cluster_nb_sectors
= QEMU_ALIGN_UP(sector_num
- *cluster_sector_num
+
2370 static int bdrv_get_cluster_size(BlockDriverState
*bs
)
2372 BlockDriverInfo bdi
;
2375 ret
= bdrv_get_info(bs
, &bdi
);
2376 if (ret
< 0 || bdi
.cluster_size
== 0) {
2377 return bs
->request_alignment
;
2379 return bdi
.cluster_size
;
2383 static bool tracked_request_overlaps(BdrvTrackedRequest
*req
,
2384 int64_t offset
, unsigned int bytes
)
2387 if (offset
>= req
->overlap_offset
+ req
->overlap_bytes
) {
2391 if (req
->overlap_offset
>= offset
+ bytes
) {
2397 static bool coroutine_fn
wait_serialising_requests(BdrvTrackedRequest
*self
)
2399 BlockDriverState
*bs
= self
->bs
;
2400 BdrvTrackedRequest
*req
;
2402 bool waited
= false;
2404 if (!bs
->serialising_in_flight
) {
2410 QLIST_FOREACH(req
, &bs
->tracked_requests
, list
) {
2411 if (req
== self
|| (!req
->serialising
&& !self
->serialising
)) {
2414 if (tracked_request_overlaps(req
, self
->overlap_offset
,
2415 self
->overlap_bytes
))
2417 /* Hitting this means there was a reentrant request, for
2418 * example, a block driver issuing nested requests. This must
2419 * never happen since it means deadlock.
2421 assert(qemu_coroutine_self() != req
->co
);
2423 /* If the request is already (indirectly) waiting for us, or
2424 * will wait for us as soon as it wakes up, then just go on
2425 * (instead of producing a deadlock in the former case). */
2426 if (!req
->waiting_for
) {
2427 self
->waiting_for
= req
;
2428 qemu_co_queue_wait(&req
->wait_queue
);
2429 self
->waiting_for
= NULL
;
2444 * -EINVAL - backing format specified, but no file
2445 * -ENOSPC - can't update the backing file because no space is left in the
2447 * -ENOTSUP - format driver doesn't support changing the backing file
2449 int bdrv_change_backing_file(BlockDriverState
*bs
,
2450 const char *backing_file
, const char *backing_fmt
)
2452 BlockDriver
*drv
= bs
->drv
;
2455 /* Backing file format doesn't make sense without a backing file */
2456 if (backing_fmt
&& !backing_file
) {
2460 if (drv
->bdrv_change_backing_file
!= NULL
) {
2461 ret
= drv
->bdrv_change_backing_file(bs
, backing_file
, backing_fmt
);
2467 pstrcpy(bs
->backing_file
, sizeof(bs
->backing_file
), backing_file
?: "");
2468 pstrcpy(bs
->backing_format
, sizeof(bs
->backing_format
), backing_fmt
?: "");
2474 * Finds the image layer in the chain that has 'bs' as its backing file.
2476 * active is the current topmost image.
2478 * Returns NULL if bs is not found in active's image chain,
2479 * or if active == bs.
2481 BlockDriverState
*bdrv_find_overlay(BlockDriverState
*active
,
2482 BlockDriverState
*bs
)
2484 BlockDriverState
*overlay
= NULL
;
2485 BlockDriverState
*intermediate
;
2487 assert(active
!= NULL
);
2490 /* if bs is the same as active, then by definition it has no overlay
2496 intermediate
= active
;
2497 while (intermediate
->backing_hd
) {
2498 if (intermediate
->backing_hd
== bs
) {
2499 overlay
= intermediate
;
2502 intermediate
= intermediate
->backing_hd
;
2508 typedef struct BlkIntermediateStates
{
2509 BlockDriverState
*bs
;
2510 QSIMPLEQ_ENTRY(BlkIntermediateStates
) entry
;
2511 } BlkIntermediateStates
;
2515 * Drops images above 'base' up to and including 'top', and sets the image
2516 * above 'top' to have base as its backing file.
2518 * Requires that the overlay to 'top' is opened r/w, so that the backing file
2519 * information in 'bs' can be properly updated.
2521 * E.g., this will convert the following chain:
2522 * bottom <- base <- intermediate <- top <- active
2526 * bottom <- base <- active
2528 * It is allowed for bottom==base, in which case it converts:
2530 * base <- intermediate <- top <- active
2537 * if active == top, that is considered an error
2540 int bdrv_drop_intermediate(BlockDriverState
*active
, BlockDriverState
*top
,
2541 BlockDriverState
*base
)
2543 BlockDriverState
*intermediate
;
2544 BlockDriverState
*base_bs
= NULL
;
2545 BlockDriverState
*new_top_bs
= NULL
;
2546 BlkIntermediateStates
*intermediate_state
, *next
;
2549 QSIMPLEQ_HEAD(states_to_delete
, BlkIntermediateStates
) states_to_delete
;
2550 QSIMPLEQ_INIT(&states_to_delete
);
2552 if (!top
->drv
|| !base
->drv
) {
2556 new_top_bs
= bdrv_find_overlay(active
, top
);
2558 if (new_top_bs
== NULL
) {
2559 /* we could not find the image above 'top', this is an error */
2563 /* special case of new_top_bs->backing_hd already pointing to base - nothing
2564 * to do, no intermediate images */
2565 if (new_top_bs
->backing_hd
== base
) {
2572 /* now we will go down through the list, and add each BDS we find
2573 * into our deletion queue, until we hit the 'base'
2575 while (intermediate
) {
2576 intermediate_state
= g_malloc0(sizeof(BlkIntermediateStates
));
2577 intermediate_state
->bs
= intermediate
;
2578 QSIMPLEQ_INSERT_TAIL(&states_to_delete
, intermediate_state
, entry
);
2580 if (intermediate
->backing_hd
== base
) {
2581 base_bs
= intermediate
->backing_hd
;
2584 intermediate
= intermediate
->backing_hd
;
2586 if (base_bs
== NULL
) {
2587 /* something went wrong, we did not end at the base. safely
2588 * unravel everything, and exit with error */
2592 /* success - we can delete the intermediate states, and link top->base */
2593 ret
= bdrv_change_backing_file(new_top_bs
, base_bs
->filename
,
2594 base_bs
->drv
? base_bs
->drv
->format_name
: "");
2598 new_top_bs
->backing_hd
= base_bs
;
2600 bdrv_refresh_limits(new_top_bs
);
2602 QSIMPLEQ_FOREACH_SAFE(intermediate_state
, &states_to_delete
, entry
, next
) {
2603 /* so that bdrv_close() does not recursively close the chain */
2604 intermediate_state
->bs
->backing_hd
= NULL
;
2605 bdrv_unref(intermediate_state
->bs
);
2610 QSIMPLEQ_FOREACH_SAFE(intermediate_state
, &states_to_delete
, entry
, next
) {
2611 g_free(intermediate_state
);
2617 static int bdrv_check_byte_request(BlockDriverState
*bs
, int64_t offset
,
2622 if (size
> INT_MAX
) {
2626 if (!bdrv_is_inserted(bs
))
2632 len
= bdrv_getlength(bs
);
2637 if ((offset
> len
) || (len
- offset
< size
))
2643 static int bdrv_check_request(BlockDriverState
*bs
, int64_t sector_num
,
2646 if (nb_sectors
< 0 || nb_sectors
> INT_MAX
/ BDRV_SECTOR_SIZE
) {
2650 return bdrv_check_byte_request(bs
, sector_num
* BDRV_SECTOR_SIZE
,
2651 nb_sectors
* BDRV_SECTOR_SIZE
);
2654 typedef struct RwCo
{
2655 BlockDriverState
*bs
;
2660 BdrvRequestFlags flags
;
2663 static void coroutine_fn
bdrv_rw_co_entry(void *opaque
)
2665 RwCo
*rwco
= opaque
;
2667 if (!rwco
->is_write
) {
2668 rwco
->ret
= bdrv_co_do_preadv(rwco
->bs
, rwco
->offset
,
2669 rwco
->qiov
->size
, rwco
->qiov
,
2672 rwco
->ret
= bdrv_co_do_pwritev(rwco
->bs
, rwco
->offset
,
2673 rwco
->qiov
->size
, rwco
->qiov
,
2679 * Process a vectored synchronous request using coroutines
2681 static int bdrv_prwv_co(BlockDriverState
*bs
, int64_t offset
,
2682 QEMUIOVector
*qiov
, bool is_write
,
2683 BdrvRequestFlags flags
)
2690 .is_write
= is_write
,
2696 * In sync call context, when the vcpu is blocked, this throttling timer
2697 * will not fire; so the I/O throttling function has to be disabled here
2698 * if it has been enabled.
2700 if (bs
->io_limits_enabled
) {
2701 fprintf(stderr
, "Disabling I/O throttling on '%s' due "
2702 "to synchronous I/O.\n", bdrv_get_device_name(bs
));
2703 bdrv_io_limits_disable(bs
);
2706 if (qemu_in_coroutine()) {
2707 /* Fast-path if already in coroutine context */
2708 bdrv_rw_co_entry(&rwco
);
2710 co
= qemu_coroutine_create(bdrv_rw_co_entry
);
2711 qemu_coroutine_enter(co
, &rwco
);
2712 while (rwco
.ret
== NOT_DONE
) {
2720 * Process a synchronous request using coroutines
2722 static int bdrv_rw_co(BlockDriverState
*bs
, int64_t sector_num
, uint8_t *buf
,
2723 int nb_sectors
, bool is_write
, BdrvRequestFlags flags
)
2726 struct iovec iov
= {
2727 .iov_base
= (void *)buf
,
2728 .iov_len
= nb_sectors
* BDRV_SECTOR_SIZE
,
2731 if (nb_sectors
< 0 || nb_sectors
> INT_MAX
/ BDRV_SECTOR_SIZE
) {
2735 qemu_iovec_init_external(&qiov
, &iov
, 1);
2736 return bdrv_prwv_co(bs
, sector_num
<< BDRV_SECTOR_BITS
,
2737 &qiov
, is_write
, flags
);
2740 /* return < 0 if error. See bdrv_write() for the return codes */
2741 int bdrv_read(BlockDriverState
*bs
, int64_t sector_num
,
2742 uint8_t *buf
, int nb_sectors
)
2744 return bdrv_rw_co(bs
, sector_num
, buf
, nb_sectors
, false, 0);
2747 /* Just like bdrv_read(), but with I/O throttling temporarily disabled */
2748 int bdrv_read_unthrottled(BlockDriverState
*bs
, int64_t sector_num
,
2749 uint8_t *buf
, int nb_sectors
)
2754 enabled
= bs
->io_limits_enabled
;
2755 bs
->io_limits_enabled
= false;
2756 ret
= bdrv_read(bs
, sector_num
, buf
, nb_sectors
);
2757 bs
->io_limits_enabled
= enabled
;
2761 /* Return < 0 if error. Important errors are:
2762 -EIO generic I/O error (may happen for all errors)
2763 -ENOMEDIUM No media inserted.
2764 -EINVAL Invalid sector number or nb_sectors
2765 -EACCES Trying to write a read-only device
2767 int bdrv_write(BlockDriverState
*bs
, int64_t sector_num
,
2768 const uint8_t *buf
, int nb_sectors
)
2770 return bdrv_rw_co(bs
, sector_num
, (uint8_t *)buf
, nb_sectors
, true, 0);
2773 int bdrv_write_zeroes(BlockDriverState
*bs
, int64_t sector_num
,
2774 int nb_sectors
, BdrvRequestFlags flags
)
2776 return bdrv_rw_co(bs
, sector_num
, NULL
, nb_sectors
, true,
2777 BDRV_REQ_ZERO_WRITE
| flags
);
2781 * Completely zero out a block device with the help of bdrv_write_zeroes.
2782 * The operation is sped up by checking the block status and only writing
2783 * zeroes to the device if they currently do not return zeroes. Optional
2784 * flags are passed through to bdrv_write_zeroes (e.g. BDRV_REQ_MAY_UNMAP).
2786 * Returns < 0 on error, 0 on success. For error codes see bdrv_write().
2788 int bdrv_make_zero(BlockDriverState
*bs
, BdrvRequestFlags flags
)
2790 int64_t target_size
;
2791 int64_t ret
, nb_sectors
, sector_num
= 0;
2794 target_size
= bdrv_getlength(bs
);
2795 if (target_size
< 0) {
2798 target_size
/= BDRV_SECTOR_SIZE
;
2801 nb_sectors
= target_size
- sector_num
;
2802 if (nb_sectors
<= 0) {
2805 if (nb_sectors
> INT_MAX
) {
2806 nb_sectors
= INT_MAX
;
2808 ret
= bdrv_get_block_status(bs
, sector_num
, nb_sectors
, &n
);
2810 error_report("error getting block status at sector %" PRId64
": %s",
2811 sector_num
, strerror(-ret
));
2814 if (ret
& BDRV_BLOCK_ZERO
) {
2818 ret
= bdrv_write_zeroes(bs
, sector_num
, n
, flags
);
2820 error_report("error writing zeroes at sector %" PRId64
": %s",
2821 sector_num
, strerror(-ret
));
2828 int bdrv_pread(BlockDriverState
*bs
, int64_t offset
, void *buf
, int bytes
)
2831 struct iovec iov
= {
2832 .iov_base
= (void *)buf
,
2841 qemu_iovec_init_external(&qiov
, &iov
, 1);
2842 ret
= bdrv_prwv_co(bs
, offset
, &qiov
, false, 0);
2850 int bdrv_pwritev(BlockDriverState
*bs
, int64_t offset
, QEMUIOVector
*qiov
)
2854 ret
= bdrv_prwv_co(bs
, offset
, qiov
, true, 0);
2862 int bdrv_pwrite(BlockDriverState
*bs
, int64_t offset
,
2863 const void *buf
, int bytes
)
2866 struct iovec iov
= {
2867 .iov_base
= (void *) buf
,
2875 qemu_iovec_init_external(&qiov
, &iov
, 1);
2876 return bdrv_pwritev(bs
, offset
, &qiov
);
2880 * Writes to the file and ensures that no writes are reordered across this
2881 * request (acts as a barrier)
2883 * Returns 0 on success, -errno in error cases.
2885 int bdrv_pwrite_sync(BlockDriverState
*bs
, int64_t offset
,
2886 const void *buf
, int count
)
2890 ret
= bdrv_pwrite(bs
, offset
, buf
, count
);
2895 /* No flush needed for cache modes that already do it */
2896 if (bs
->enable_write_cache
) {
2903 static int coroutine_fn
bdrv_co_do_copy_on_readv(BlockDriverState
*bs
,
2904 int64_t sector_num
, int nb_sectors
, QEMUIOVector
*qiov
)
2906 /* Perform I/O through a temporary buffer so that users who scribble over
2907 * their read buffer while the operation is in progress do not end up
2908 * modifying the image file. This is critical for zero-copy guest I/O
2909 * where anything might happen inside guest memory.
2911 void *bounce_buffer
;
2913 BlockDriver
*drv
= bs
->drv
;
2915 QEMUIOVector bounce_qiov
;
2916 int64_t cluster_sector_num
;
2917 int cluster_nb_sectors
;
2921 /* Cover entire cluster so no additional backing file I/O is required when
2922 * allocating cluster in the image file.
2924 bdrv_round_to_clusters(bs
, sector_num
, nb_sectors
,
2925 &cluster_sector_num
, &cluster_nb_sectors
);
2927 trace_bdrv_co_do_copy_on_readv(bs
, sector_num
, nb_sectors
,
2928 cluster_sector_num
, cluster_nb_sectors
);
2930 iov
.iov_len
= cluster_nb_sectors
* BDRV_SECTOR_SIZE
;
2931 iov
.iov_base
= bounce_buffer
= qemu_blockalign(bs
, iov
.iov_len
);
2932 qemu_iovec_init_external(&bounce_qiov
, &iov
, 1);
2934 ret
= drv
->bdrv_co_readv(bs
, cluster_sector_num
, cluster_nb_sectors
,
2940 if (drv
->bdrv_co_write_zeroes
&&
2941 buffer_is_zero(bounce_buffer
, iov
.iov_len
)) {
2942 ret
= bdrv_co_do_write_zeroes(bs
, cluster_sector_num
,
2943 cluster_nb_sectors
, 0);
2945 /* This does not change the data on the disk, it is not necessary
2946 * to flush even in cache=writethrough mode.
2948 ret
= drv
->bdrv_co_writev(bs
, cluster_sector_num
, cluster_nb_sectors
,
2953 /* It might be okay to ignore write errors for guest requests. If this
2954 * is a deliberate copy-on-read then we don't want to ignore the error.
2955 * Simply report it in all cases.
2960 skip_bytes
= (sector_num
- cluster_sector_num
) * BDRV_SECTOR_SIZE
;
2961 qemu_iovec_from_buf(qiov
, 0, bounce_buffer
+ skip_bytes
,
2962 nb_sectors
* BDRV_SECTOR_SIZE
);
2965 qemu_vfree(bounce_buffer
);
2970 * Forwards an already correctly aligned request to the BlockDriver. This
2971 * handles copy on read and zeroing after EOF; any other features must be
2972 * implemented by the caller.
2974 static int coroutine_fn
bdrv_aligned_preadv(BlockDriverState
*bs
,
2975 BdrvTrackedRequest
*req
, int64_t offset
, unsigned int bytes
,
2976 int64_t align
, QEMUIOVector
*qiov
, int flags
)
2978 BlockDriver
*drv
= bs
->drv
;
2981 int64_t sector_num
= offset
>> BDRV_SECTOR_BITS
;
2982 unsigned int nb_sectors
= bytes
>> BDRV_SECTOR_BITS
;
2984 assert((offset
& (BDRV_SECTOR_SIZE
- 1)) == 0);
2985 assert((bytes
& (BDRV_SECTOR_SIZE
- 1)) == 0);
2987 /* Handle Copy on Read and associated serialisation */
2988 if (flags
& BDRV_REQ_COPY_ON_READ
) {
2989 /* If we touch the same cluster it counts as an overlap. This
2990 * guarantees that allocating writes will be serialized and not race
2991 * with each other for the same cluster. For example, in copy-on-read
2992 * it ensures that the CoR read and write operations are atomic and
2993 * guest writes cannot interleave between them. */
2994 mark_request_serialising(req
, bdrv_get_cluster_size(bs
));
2997 wait_serialising_requests(req
);
2999 if (flags
& BDRV_REQ_COPY_ON_READ
) {
3002 ret
= bdrv_is_allocated(bs
, sector_num
, nb_sectors
, &pnum
);
3007 if (!ret
|| pnum
!= nb_sectors
) {
3008 ret
= bdrv_co_do_copy_on_readv(bs
, sector_num
, nb_sectors
, qiov
);
3013 /* Forward the request to the BlockDriver */
3014 if (!(bs
->zero_beyond_eof
&& bs
->growable
)) {
3015 ret
= drv
->bdrv_co_readv(bs
, sector_num
, nb_sectors
, qiov
);
3017 /* Read zeros after EOF of growable BDSes */
3018 int64_t len
, total_sectors
, max_nb_sectors
;
3020 len
= bdrv_getlength(bs
);
3026 total_sectors
= DIV_ROUND_UP(len
, BDRV_SECTOR_SIZE
);
3027 max_nb_sectors
= ROUND_UP(MAX(0, total_sectors
- sector_num
),
3028 align
>> BDRV_SECTOR_BITS
);
3029 if (max_nb_sectors
> 0) {
3030 ret
= drv
->bdrv_co_readv(bs
, sector_num
,
3031 MIN(nb_sectors
, max_nb_sectors
), qiov
);
3036 /* Reading beyond end of file is supposed to produce zeroes */
3037 if (ret
== 0 && total_sectors
< sector_num
+ nb_sectors
) {
3038 uint64_t offset
= MAX(0, total_sectors
- sector_num
);
3039 uint64_t bytes
= (sector_num
+ nb_sectors
- offset
) *
3041 qemu_iovec_memset(qiov
, offset
* BDRV_SECTOR_SIZE
, 0, bytes
);
3050 * Handle a read request in coroutine context
3052 static int coroutine_fn
bdrv_co_do_preadv(BlockDriverState
*bs
,
3053 int64_t offset
, unsigned int bytes
, QEMUIOVector
*qiov
,
3054 BdrvRequestFlags flags
)
3056 BlockDriver
*drv
= bs
->drv
;
3057 BdrvTrackedRequest req
;
3059 /* TODO Lift BDRV_SECTOR_SIZE restriction in BlockDriver interface */
3060 uint64_t align
= MAX(BDRV_SECTOR_SIZE
, bs
->request_alignment
);
3061 uint8_t *head_buf
= NULL
;
3062 uint8_t *tail_buf
= NULL
;
3063 QEMUIOVector local_qiov
;
3064 bool use_local_qiov
= false;
3070 if (bdrv_check_byte_request(bs
, offset
, bytes
)) {
3074 if (bs
->copy_on_read
) {
3075 flags
|= BDRV_REQ_COPY_ON_READ
;
3078 /* throttling disk I/O */
3079 if (bs
->io_limits_enabled
) {
3080 bdrv_io_limits_intercept(bs
, bytes
, false);
3083 /* Align read if necessary by padding qiov */
3084 if (offset
& (align
- 1)) {
3085 head_buf
= qemu_blockalign(bs
, align
);
3086 qemu_iovec_init(&local_qiov
, qiov
->niov
+ 2);
3087 qemu_iovec_add(&local_qiov
, head_buf
, offset
& (align
- 1));
3088 qemu_iovec_concat(&local_qiov
, qiov
, 0, qiov
->size
);
3089 use_local_qiov
= true;
3091 bytes
+= offset
& (align
- 1);
3092 offset
= offset
& ~(align
- 1);
3095 if ((offset
+ bytes
) & (align
- 1)) {
3096 if (!use_local_qiov
) {
3097 qemu_iovec_init(&local_qiov
, qiov
->niov
+ 1);
3098 qemu_iovec_concat(&local_qiov
, qiov
, 0, qiov
->size
);
3099 use_local_qiov
= true;
3101 tail_buf
= qemu_blockalign(bs
, align
);
3102 qemu_iovec_add(&local_qiov
, tail_buf
,
3103 align
- ((offset
+ bytes
) & (align
- 1)));
3105 bytes
= ROUND_UP(bytes
, align
);
3108 tracked_request_begin(&req
, bs
, offset
, bytes
, false);
3109 ret
= bdrv_aligned_preadv(bs
, &req
, offset
, bytes
, align
,
3110 use_local_qiov
? &local_qiov
: qiov
,
3112 tracked_request_end(&req
);
3114 if (use_local_qiov
) {
3115 qemu_iovec_destroy(&local_qiov
);
3116 qemu_vfree(head_buf
);
3117 qemu_vfree(tail_buf
);
3123 static int coroutine_fn
bdrv_co_do_readv(BlockDriverState
*bs
,
3124 int64_t sector_num
, int nb_sectors
, QEMUIOVector
*qiov
,
3125 BdrvRequestFlags flags
)
3127 if (nb_sectors
< 0 || nb_sectors
> (UINT_MAX
>> BDRV_SECTOR_BITS
)) {
3131 return bdrv_co_do_preadv(bs
, sector_num
<< BDRV_SECTOR_BITS
,
3132 nb_sectors
<< BDRV_SECTOR_BITS
, qiov
, flags
);
3135 int coroutine_fn
bdrv_co_readv(BlockDriverState
*bs
, int64_t sector_num
,
3136 int nb_sectors
, QEMUIOVector
*qiov
)
3138 trace_bdrv_co_readv(bs
, sector_num
, nb_sectors
);
3140 return bdrv_co_do_readv(bs
, sector_num
, nb_sectors
, qiov
, 0);
3143 int coroutine_fn
bdrv_co_copy_on_readv(BlockDriverState
*bs
,
3144 int64_t sector_num
, int nb_sectors
, QEMUIOVector
*qiov
)
3146 trace_bdrv_co_copy_on_readv(bs
, sector_num
, nb_sectors
);
3148 return bdrv_co_do_readv(bs
, sector_num
, nb_sectors
, qiov
,
3149 BDRV_REQ_COPY_ON_READ
);
3152 /* if no limit is specified in the BlockLimits use a default
3153 * of 32768 512-byte sectors (16 MiB) per request.
3155 #define MAX_WRITE_ZEROES_DEFAULT 32768
3157 static int coroutine_fn
bdrv_co_do_write_zeroes(BlockDriverState
*bs
,
3158 int64_t sector_num
, int nb_sectors
, BdrvRequestFlags flags
)
3160 BlockDriver
*drv
= bs
->drv
;
3162 struct iovec iov
= {0};
3165 int max_write_zeroes
= bs
->bl
.max_write_zeroes
?
3166 bs
->bl
.max_write_zeroes
: MAX_WRITE_ZEROES_DEFAULT
;
3168 while (nb_sectors
> 0 && !ret
) {
3169 int num
= nb_sectors
;
3171 /* Align request. Block drivers can expect the "bulk" of the request
3174 if (bs
->bl
.write_zeroes_alignment
3175 && num
> bs
->bl
.write_zeroes_alignment
) {
3176 if (sector_num
% bs
->bl
.write_zeroes_alignment
!= 0) {
3177 /* Make a small request up to the first aligned sector. */
3178 num
= bs
->bl
.write_zeroes_alignment
;
3179 num
-= sector_num
% bs
->bl
.write_zeroes_alignment
;
3180 } else if ((sector_num
+ num
) % bs
->bl
.write_zeroes_alignment
!= 0) {
3181 /* Shorten the request to the last aligned sector. num cannot
3182 * underflow because num > bs->bl.write_zeroes_alignment.
3184 num
-= (sector_num
+ num
) % bs
->bl
.write_zeroes_alignment
;
3188 /* limit request size */
3189 if (num
> max_write_zeroes
) {
3190 num
= max_write_zeroes
;
3194 /* First try the efficient write zeroes operation */
3195 if (drv
->bdrv_co_write_zeroes
) {
3196 ret
= drv
->bdrv_co_write_zeroes(bs
, sector_num
, num
, flags
);
3199 if (ret
== -ENOTSUP
) {
3200 /* Fall back to bounce buffer if write zeroes is unsupported */
3201 iov
.iov_len
= num
* BDRV_SECTOR_SIZE
;
3202 if (iov
.iov_base
== NULL
) {
3203 iov
.iov_base
= qemu_blockalign(bs
, num
* BDRV_SECTOR_SIZE
);
3204 memset(iov
.iov_base
, 0, num
* BDRV_SECTOR_SIZE
);
3206 qemu_iovec_init_external(&qiov
, &iov
, 1);
3208 ret
= drv
->bdrv_co_writev(bs
, sector_num
, num
, &qiov
);
3210 /* Keep bounce buffer around if it is big enough for all
3211 * all future requests.
3213 if (num
< max_write_zeroes
) {
3214 qemu_vfree(iov
.iov_base
);
3215 iov
.iov_base
= NULL
;
3223 qemu_vfree(iov
.iov_base
);
3228 * Forwards an already correctly aligned write request to the BlockDriver.
3230 static int coroutine_fn
bdrv_aligned_pwritev(BlockDriverState
*bs
,
3231 BdrvTrackedRequest
*req
, int64_t offset
, unsigned int bytes
,
3232 QEMUIOVector
*qiov
, int flags
)
3234 BlockDriver
*drv
= bs
->drv
;
3238 int64_t sector_num
= offset
>> BDRV_SECTOR_BITS
;
3239 unsigned int nb_sectors
= bytes
>> BDRV_SECTOR_BITS
;
3241 assert((offset
& (BDRV_SECTOR_SIZE
- 1)) == 0);
3242 assert((bytes
& (BDRV_SECTOR_SIZE
- 1)) == 0);
3244 waited
= wait_serialising_requests(req
);
3245 assert(!waited
|| !req
->serialising
);
3246 assert(req
->overlap_offset
<= offset
);
3247 assert(offset
+ bytes
<= req
->overlap_offset
+ req
->overlap_bytes
);
3249 ret
= notifier_with_return_list_notify(&bs
->before_write_notifiers
, req
);
3252 /* Do nothing, write notifier decided to fail this request */
3253 } else if (flags
& BDRV_REQ_ZERO_WRITE
) {
3254 BLKDBG_EVENT(bs
, BLKDBG_PWRITEV_ZERO
);
3255 ret
= bdrv_co_do_write_zeroes(bs
, sector_num
, nb_sectors
, flags
);
3257 BLKDBG_EVENT(bs
, BLKDBG_PWRITEV
);
3258 ret
= drv
->bdrv_co_writev(bs
, sector_num
, nb_sectors
, qiov
);
3260 BLKDBG_EVENT(bs
, BLKDBG_PWRITEV_DONE
);
3262 if (ret
== 0 && !bs
->enable_write_cache
) {
3263 ret
= bdrv_co_flush(bs
);
3266 bdrv_set_dirty(bs
, sector_num
, nb_sectors
);
3268 if (bs
->wr_highest_sector
< sector_num
+ nb_sectors
- 1) {
3269 bs
->wr_highest_sector
= sector_num
+ nb_sectors
- 1;
3271 if (bs
->growable
&& ret
>= 0) {
3272 bs
->total_sectors
= MAX(bs
->total_sectors
, sector_num
+ nb_sectors
);
3279 * Handle a write request in coroutine context
3281 static int coroutine_fn
bdrv_co_do_pwritev(BlockDriverState
*bs
,
3282 int64_t offset
, unsigned int bytes
, QEMUIOVector
*qiov
,
3283 BdrvRequestFlags flags
)
3285 BdrvTrackedRequest req
;
3286 /* TODO Lift BDRV_SECTOR_SIZE restriction in BlockDriver interface */
3287 uint64_t align
= MAX(BDRV_SECTOR_SIZE
, bs
->request_alignment
);
3288 uint8_t *head_buf
= NULL
;
3289 uint8_t *tail_buf
= NULL
;
3290 QEMUIOVector local_qiov
;
3291 bool use_local_qiov
= false;
3297 if (bs
->read_only
) {
3300 if (bdrv_check_byte_request(bs
, offset
, bytes
)) {
3304 /* throttling disk I/O */
3305 if (bs
->io_limits_enabled
) {
3306 bdrv_io_limits_intercept(bs
, bytes
, true);
3310 * Align write if necessary by performing a read-modify-write cycle.
3311 * Pad qiov with the read parts and be sure to have a tracked request not
3312 * only for bdrv_aligned_pwritev, but also for the reads of the RMW cycle.
3314 tracked_request_begin(&req
, bs
, offset
, bytes
, true);
3316 if (offset
& (align
- 1)) {
3317 QEMUIOVector head_qiov
;
3318 struct iovec head_iov
;
3320 mark_request_serialising(&req
, align
);
3321 wait_serialising_requests(&req
);
3323 head_buf
= qemu_blockalign(bs
, align
);
3324 head_iov
= (struct iovec
) {
3325 .iov_base
= head_buf
,
3328 qemu_iovec_init_external(&head_qiov
, &head_iov
, 1);
3330 BLKDBG_EVENT(bs
, BLKDBG_PWRITEV_RMW_HEAD
);
3331 ret
= bdrv_aligned_preadv(bs
, &req
, offset
& ~(align
- 1), align
,
3332 align
, &head_qiov
, 0);
3336 BLKDBG_EVENT(bs
, BLKDBG_PWRITEV_RMW_AFTER_HEAD
);
3338 qemu_iovec_init(&local_qiov
, qiov
->niov
+ 2);
3339 qemu_iovec_add(&local_qiov
, head_buf
, offset
& (align
- 1));
3340 qemu_iovec_concat(&local_qiov
, qiov
, 0, qiov
->size
);
3341 use_local_qiov
= true;
3343 bytes
+= offset
& (align
- 1);
3344 offset
= offset
& ~(align
- 1);
3347 if ((offset
+ bytes
) & (align
- 1)) {
3348 QEMUIOVector tail_qiov
;
3349 struct iovec tail_iov
;
3353 mark_request_serialising(&req
, align
);
3354 waited
= wait_serialising_requests(&req
);
3355 assert(!waited
|| !use_local_qiov
);
3357 tail_buf
= qemu_blockalign(bs
, align
);
3358 tail_iov
= (struct iovec
) {
3359 .iov_base
= tail_buf
,
3362 qemu_iovec_init_external(&tail_qiov
, &tail_iov
, 1);
3364 BLKDBG_EVENT(bs
, BLKDBG_PWRITEV_RMW_TAIL
);
3365 ret
= bdrv_aligned_preadv(bs
, &req
, (offset
+ bytes
) & ~(align
- 1), align
,
3366 align
, &tail_qiov
, 0);
3370 BLKDBG_EVENT(bs
, BLKDBG_PWRITEV_RMW_AFTER_TAIL
);
3372 if (!use_local_qiov
) {
3373 qemu_iovec_init(&local_qiov
, qiov
->niov
+ 1);
3374 qemu_iovec_concat(&local_qiov
, qiov
, 0, qiov
->size
);
3375 use_local_qiov
= true;
3378 tail_bytes
= (offset
+ bytes
) & (align
- 1);
3379 qemu_iovec_add(&local_qiov
, tail_buf
+ tail_bytes
, align
- tail_bytes
);
3381 bytes
= ROUND_UP(bytes
, align
);
3384 ret
= bdrv_aligned_pwritev(bs
, &req
, offset
, bytes
,
3385 use_local_qiov
? &local_qiov
: qiov
,
3389 tracked_request_end(&req
);
3391 if (use_local_qiov
) {
3392 qemu_iovec_destroy(&local_qiov
);
3394 qemu_vfree(head_buf
);
3395 qemu_vfree(tail_buf
);
3400 static int coroutine_fn
bdrv_co_do_writev(BlockDriverState
*bs
,
3401 int64_t sector_num
, int nb_sectors
, QEMUIOVector
*qiov
,
3402 BdrvRequestFlags flags
)
3404 if (nb_sectors
< 0 || nb_sectors
> (INT_MAX
>> BDRV_SECTOR_BITS
)) {
3408 return bdrv_co_do_pwritev(bs
, sector_num
<< BDRV_SECTOR_BITS
,
3409 nb_sectors
<< BDRV_SECTOR_BITS
, qiov
, flags
);
3412 int coroutine_fn
bdrv_co_writev(BlockDriverState
*bs
, int64_t sector_num
,
3413 int nb_sectors
, QEMUIOVector
*qiov
)
3415 trace_bdrv_co_writev(bs
, sector_num
, nb_sectors
);
3417 return bdrv_co_do_writev(bs
, sector_num
, nb_sectors
, qiov
, 0);
3420 int coroutine_fn
bdrv_co_write_zeroes(BlockDriverState
*bs
,
3421 int64_t sector_num
, int nb_sectors
,
3422 BdrvRequestFlags flags
)
3424 trace_bdrv_co_write_zeroes(bs
, sector_num
, nb_sectors
, flags
);
3426 if (!(bs
->open_flags
& BDRV_O_UNMAP
)) {
3427 flags
&= ~BDRV_REQ_MAY_UNMAP
;
3430 return bdrv_co_do_writev(bs
, sector_num
, nb_sectors
, NULL
,
3431 BDRV_REQ_ZERO_WRITE
| flags
);
3435 * Truncate file to 'offset' bytes (needed only for file protocols)
3437 int bdrv_truncate(BlockDriverState
*bs
, int64_t offset
)
3439 BlockDriver
*drv
= bs
->drv
;
3443 if (!drv
->bdrv_truncate
)
3447 if (bdrv_in_use(bs
))
3449 ret
= drv
->bdrv_truncate(bs
, offset
);
3451 ret
= refresh_total_sectors(bs
, offset
>> BDRV_SECTOR_BITS
);
3452 bdrv_dev_resize_cb(bs
);
3458 * Length of a allocated file in bytes. Sparse files are counted by actual
3459 * allocated space. Return < 0 if error or unknown.
3461 int64_t bdrv_get_allocated_file_size(BlockDriverState
*bs
)
3463 BlockDriver
*drv
= bs
->drv
;
3467 if (drv
->bdrv_get_allocated_file_size
) {
3468 return drv
->bdrv_get_allocated_file_size(bs
);
3471 return bdrv_get_allocated_file_size(bs
->file
);
3477 * Length of a file in bytes. Return < 0 if error or unknown.
3479 int64_t bdrv_getlength(BlockDriverState
*bs
)
3481 BlockDriver
*drv
= bs
->drv
;
3485 if (drv
->has_variable_length
) {
3486 int ret
= refresh_total_sectors(bs
, bs
->total_sectors
);
3491 return bs
->total_sectors
* BDRV_SECTOR_SIZE
;
3494 /* return 0 as number of sectors if no device present or error */
3495 void bdrv_get_geometry(BlockDriverState
*bs
, uint64_t *nb_sectors_ptr
)
3498 length
= bdrv_getlength(bs
);
3502 length
= length
>> BDRV_SECTOR_BITS
;
3503 *nb_sectors_ptr
= length
;
3506 void bdrv_set_on_error(BlockDriverState
*bs
, BlockdevOnError on_read_error
,
3507 BlockdevOnError on_write_error
)
3509 bs
->on_read_error
= on_read_error
;
3510 bs
->on_write_error
= on_write_error
;
3513 BlockdevOnError
bdrv_get_on_error(BlockDriverState
*bs
, bool is_read
)
3515 return is_read
? bs
->on_read_error
: bs
->on_write_error
;
3518 BlockErrorAction
bdrv_get_error_action(BlockDriverState
*bs
, bool is_read
, int error
)
3520 BlockdevOnError on_err
= is_read
? bs
->on_read_error
: bs
->on_write_error
;
3523 case BLOCKDEV_ON_ERROR_ENOSPC
:
3524 return (error
== ENOSPC
) ? BDRV_ACTION_STOP
: BDRV_ACTION_REPORT
;
3525 case BLOCKDEV_ON_ERROR_STOP
:
3526 return BDRV_ACTION_STOP
;
3527 case BLOCKDEV_ON_ERROR_REPORT
:
3528 return BDRV_ACTION_REPORT
;
3529 case BLOCKDEV_ON_ERROR_IGNORE
:
3530 return BDRV_ACTION_IGNORE
;
3536 /* This is done by device models because, while the block layer knows
3537 * about the error, it does not know whether an operation comes from
3538 * the device or the block layer (from a job, for example).
3540 void bdrv_error_action(BlockDriverState
*bs
, BlockErrorAction action
,
3541 bool is_read
, int error
)
3544 bdrv_emit_qmp_error_event(bs
, QEVENT_BLOCK_IO_ERROR
, action
, is_read
);
3545 if (action
== BDRV_ACTION_STOP
) {
3546 vm_stop(RUN_STATE_IO_ERROR
);
3547 bdrv_iostatus_set_err(bs
, error
);
3551 int bdrv_is_read_only(BlockDriverState
*bs
)
3553 return bs
->read_only
;
3556 int bdrv_is_sg(BlockDriverState
*bs
)
3561 int bdrv_enable_write_cache(BlockDriverState
*bs
)
3563 return bs
->enable_write_cache
;
3566 void bdrv_set_enable_write_cache(BlockDriverState
*bs
, bool wce
)
3568 bs
->enable_write_cache
= wce
;
3570 /* so a reopen() will preserve wce */
3572 bs
->open_flags
|= BDRV_O_CACHE_WB
;
3574 bs
->open_flags
&= ~BDRV_O_CACHE_WB
;
3578 int bdrv_is_encrypted(BlockDriverState
*bs
)
3580 if (bs
->backing_hd
&& bs
->backing_hd
->encrypted
)
3582 return bs
->encrypted
;
3585 int bdrv_key_required(BlockDriverState
*bs
)
3587 BlockDriverState
*backing_hd
= bs
->backing_hd
;
3589 if (backing_hd
&& backing_hd
->encrypted
&& !backing_hd
->valid_key
)
3591 return (bs
->encrypted
&& !bs
->valid_key
);
3594 int bdrv_set_key(BlockDriverState
*bs
, const char *key
)
3597 if (bs
->backing_hd
&& bs
->backing_hd
->encrypted
) {
3598 ret
= bdrv_set_key(bs
->backing_hd
, key
);
3604 if (!bs
->encrypted
) {
3606 } else if (!bs
->drv
|| !bs
->drv
->bdrv_set_key
) {
3609 ret
= bs
->drv
->bdrv_set_key(bs
, key
);
3612 } else if (!bs
->valid_key
) {
3614 /* call the change callback now, we skipped it on open */
3615 bdrv_dev_change_media_cb(bs
, true);
3620 const char *bdrv_get_format_name(BlockDriverState
*bs
)
3622 return bs
->drv
? bs
->drv
->format_name
: NULL
;
3625 void bdrv_iterate_format(void (*it
)(void *opaque
, const char *name
),
3630 const char **formats
= NULL
;
3632 QLIST_FOREACH(drv
, &bdrv_drivers
, list
) {
3633 if (drv
->format_name
) {
3636 while (formats
&& i
&& !found
) {
3637 found
= !strcmp(formats
[--i
], drv
->format_name
);
3641 formats
= g_realloc(formats
, (count
+ 1) * sizeof(char *));
3642 formats
[count
++] = drv
->format_name
;
3643 it(opaque
, drv
->format_name
);
3650 /* This function is to find block backend bs */
3651 BlockDriverState
*bdrv_find(const char *name
)
3653 BlockDriverState
*bs
;
3655 QTAILQ_FOREACH(bs
, &bdrv_states
, device_list
) {
3656 if (!strcmp(name
, bs
->device_name
)) {
3663 /* This function is to find a node in the bs graph */
3664 BlockDriverState
*bdrv_find_node(const char *node_name
)
3666 BlockDriverState
*bs
;
3670 QTAILQ_FOREACH(bs
, &graph_bdrv_states
, node_list
) {
3671 if (!strcmp(node_name
, bs
->node_name
)) {
3678 /* Put this QMP function here so it can access the static graph_bdrv_states. */
3679 BlockDeviceInfoList
*bdrv_named_nodes_list(void)
3681 BlockDeviceInfoList
*list
, *entry
;
3682 BlockDriverState
*bs
;
3685 QTAILQ_FOREACH(bs
, &graph_bdrv_states
, node_list
) {
3686 entry
= g_malloc0(sizeof(*entry
));
3687 entry
->value
= bdrv_block_device_info(bs
);
3695 BlockDriverState
*bdrv_lookup_bs(const char *device
,
3696 const char *node_name
,
3699 BlockDriverState
*bs
= NULL
;
3702 bs
= bdrv_find(device
);
3710 bs
= bdrv_find_node(node_name
);
3717 error_setg(errp
, "Cannot find device=%s nor node_name=%s",
3718 device
? device
: "",
3719 node_name
? node_name
: "");
3723 BlockDriverState
*bdrv_next(BlockDriverState
*bs
)
3726 return QTAILQ_FIRST(&bdrv_states
);
3728 return QTAILQ_NEXT(bs
, device_list
);
3731 void bdrv_iterate(void (*it
)(void *opaque
, BlockDriverState
*bs
), void *opaque
)
3733 BlockDriverState
*bs
;
3735 QTAILQ_FOREACH(bs
, &bdrv_states
, device_list
) {
3740 const char *bdrv_get_device_name(BlockDriverState
*bs
)
3742 return bs
->device_name
;
3745 int bdrv_get_flags(BlockDriverState
*bs
)
3747 return bs
->open_flags
;
3750 int bdrv_flush_all(void)
3752 BlockDriverState
*bs
;
3755 QTAILQ_FOREACH(bs
, &bdrv_states
, device_list
) {
3756 int ret
= bdrv_flush(bs
);
3757 if (ret
< 0 && !result
) {
3765 int bdrv_has_zero_init_1(BlockDriverState
*bs
)
3770 int bdrv_has_zero_init(BlockDriverState
*bs
)
3774 /* If BS is a copy on write image, it is initialized to
3775 the contents of the base image, which may not be zeroes. */
3776 if (bs
->backing_hd
) {
3779 if (bs
->drv
->bdrv_has_zero_init
) {
3780 return bs
->drv
->bdrv_has_zero_init(bs
);
3787 bool bdrv_unallocated_blocks_are_zero(BlockDriverState
*bs
)
3789 BlockDriverInfo bdi
;
3791 if (bs
->backing_hd
) {
3795 if (bdrv_get_info(bs
, &bdi
) == 0) {
3796 return bdi
.unallocated_blocks_are_zero
;
3802 bool bdrv_can_write_zeroes_with_unmap(BlockDriverState
*bs
)
3804 BlockDriverInfo bdi
;
3806 if (bs
->backing_hd
|| !(bs
->open_flags
& BDRV_O_UNMAP
)) {
3810 if (bdrv_get_info(bs
, &bdi
) == 0) {
3811 return bdi
.can_write_zeroes_with_unmap
;
3817 typedef struct BdrvCoGetBlockStatusData
{
3818 BlockDriverState
*bs
;
3819 BlockDriverState
*base
;
3825 } BdrvCoGetBlockStatusData
;
3828 * Returns true iff the specified sector is present in the disk image. Drivers
3829 * not implementing the functionality are assumed to not support backing files,
3830 * hence all their sectors are reported as allocated.
3832 * If 'sector_num' is beyond the end of the disk image the return value is 0
3833 * and 'pnum' is set to 0.
3835 * 'pnum' is set to the number of sectors (including and immediately following
3836 * the specified sector) that are known to be in the same
3837 * allocated/unallocated state.
3839 * 'nb_sectors' is the max value 'pnum' should be set to. If nb_sectors goes
3840 * beyond the end of the disk image it will be clamped.
3842 static int64_t coroutine_fn
bdrv_co_get_block_status(BlockDriverState
*bs
,
3844 int nb_sectors
, int *pnum
)
3850 length
= bdrv_getlength(bs
);
3855 if (sector_num
>= (length
>> BDRV_SECTOR_BITS
)) {
3860 n
= bs
->total_sectors
- sector_num
;
3861 if (n
< nb_sectors
) {
3865 if (!bs
->drv
->bdrv_co_get_block_status
) {
3867 ret
= BDRV_BLOCK_DATA
;
3868 if (bs
->drv
->protocol_name
) {
3869 ret
|= BDRV_BLOCK_OFFSET_VALID
| (sector_num
* BDRV_SECTOR_SIZE
);
3874 ret
= bs
->drv
->bdrv_co_get_block_status(bs
, sector_num
, nb_sectors
, pnum
);
3880 if (ret
& BDRV_BLOCK_RAW
) {
3881 assert(ret
& BDRV_BLOCK_OFFSET_VALID
);
3882 return bdrv_get_block_status(bs
->file
, ret
>> BDRV_SECTOR_BITS
,
3886 if (!(ret
& BDRV_BLOCK_DATA
) && !(ret
& BDRV_BLOCK_ZERO
)) {
3887 if (bdrv_unallocated_blocks_are_zero(bs
)) {
3888 ret
|= BDRV_BLOCK_ZERO
;
3889 } else if (bs
->backing_hd
) {
3890 BlockDriverState
*bs2
= bs
->backing_hd
;
3891 int64_t length2
= bdrv_getlength(bs2
);
3892 if (length2
>= 0 && sector_num
>= (length2
>> BDRV_SECTOR_BITS
)) {
3893 ret
|= BDRV_BLOCK_ZERO
;
3899 (ret
& BDRV_BLOCK_DATA
) && !(ret
& BDRV_BLOCK_ZERO
) &&
3900 (ret
& BDRV_BLOCK_OFFSET_VALID
)) {
3901 ret2
= bdrv_co_get_block_status(bs
->file
, ret
>> BDRV_SECTOR_BITS
,
3904 /* Ignore errors. This is just providing extra information, it
3905 * is useful but not necessary.
3907 ret
|= (ret2
& BDRV_BLOCK_ZERO
);
3914 /* Coroutine wrapper for bdrv_get_block_status() */
3915 static void coroutine_fn
bdrv_get_block_status_co_entry(void *opaque
)
3917 BdrvCoGetBlockStatusData
*data
= opaque
;
3918 BlockDriverState
*bs
= data
->bs
;
3920 data
->ret
= bdrv_co_get_block_status(bs
, data
->sector_num
, data
->nb_sectors
,
3926 * Synchronous wrapper around bdrv_co_get_block_status().
3928 * See bdrv_co_get_block_status() for details.
3930 int64_t bdrv_get_block_status(BlockDriverState
*bs
, int64_t sector_num
,
3931 int nb_sectors
, int *pnum
)
3934 BdrvCoGetBlockStatusData data
= {
3936 .sector_num
= sector_num
,
3937 .nb_sectors
= nb_sectors
,
3942 if (qemu_in_coroutine()) {
3943 /* Fast-path if already in coroutine context */
3944 bdrv_get_block_status_co_entry(&data
);
3946 co
= qemu_coroutine_create(bdrv_get_block_status_co_entry
);
3947 qemu_coroutine_enter(co
, &data
);
3948 while (!data
.done
) {
3955 int coroutine_fn
bdrv_is_allocated(BlockDriverState
*bs
, int64_t sector_num
,
3956 int nb_sectors
, int *pnum
)
3958 int64_t ret
= bdrv_get_block_status(bs
, sector_num
, nb_sectors
, pnum
);
3963 (ret
& BDRV_BLOCK_DATA
) ||
3964 ((ret
& BDRV_BLOCK_ZERO
) && !bdrv_has_zero_init(bs
));
3968 * Given an image chain: ... -> [BASE] -> [INTER1] -> [INTER2] -> [TOP]
3970 * Return true if the given sector is allocated in any image between
3971 * BASE and TOP (inclusive). BASE can be NULL to check if the given
3972 * sector is allocated in any image of the chain. Return false otherwise.
3974 * 'pnum' is set to the number of sectors (including and immediately following
3975 * the specified sector) that are known to be in the same
3976 * allocated/unallocated state.
3979 int bdrv_is_allocated_above(BlockDriverState
*top
,
3980 BlockDriverState
*base
,
3982 int nb_sectors
, int *pnum
)
3984 BlockDriverState
*intermediate
;
3985 int ret
, n
= nb_sectors
;
3988 while (intermediate
&& intermediate
!= base
) {
3990 ret
= bdrv_is_allocated(intermediate
, sector_num
, nb_sectors
,
4000 * [sector_num, nb_sectors] is unallocated on top but intermediate
4003 * [sector_num+x, nr_sectors] allocated.
4005 if (n
> pnum_inter
&&
4006 (intermediate
== top
||
4007 sector_num
+ pnum_inter
< intermediate
->total_sectors
)) {
4011 intermediate
= intermediate
->backing_hd
;
4018 const char *bdrv_get_encrypted_filename(BlockDriverState
*bs
)
4020 if (bs
->backing_hd
&& bs
->backing_hd
->encrypted
)
4021 return bs
->backing_file
;
4022 else if (bs
->encrypted
)
4023 return bs
->filename
;
4028 void bdrv_get_backing_filename(BlockDriverState
*bs
,
4029 char *filename
, int filename_size
)
4031 pstrcpy(filename
, filename_size
, bs
->backing_file
);
4034 int bdrv_write_compressed(BlockDriverState
*bs
, int64_t sector_num
,
4035 const uint8_t *buf
, int nb_sectors
)
4037 BlockDriver
*drv
= bs
->drv
;
4040 if (!drv
->bdrv_write_compressed
)
4042 if (bdrv_check_request(bs
, sector_num
, nb_sectors
))
4045 assert(QLIST_EMPTY(&bs
->dirty_bitmaps
));
4047 return drv
->bdrv_write_compressed(bs
, sector_num
, buf
, nb_sectors
);
4050 int bdrv_get_info(BlockDriverState
*bs
, BlockDriverInfo
*bdi
)
4052 BlockDriver
*drv
= bs
->drv
;
4055 if (!drv
->bdrv_get_info
)
4057 memset(bdi
, 0, sizeof(*bdi
));
4058 return drv
->bdrv_get_info(bs
, bdi
);
4061 ImageInfoSpecific
*bdrv_get_specific_info(BlockDriverState
*bs
)
4063 BlockDriver
*drv
= bs
->drv
;
4064 if (drv
&& drv
->bdrv_get_specific_info
) {
4065 return drv
->bdrv_get_specific_info(bs
);
4070 int bdrv_save_vmstate(BlockDriverState
*bs
, const uint8_t *buf
,
4071 int64_t pos
, int size
)
4074 struct iovec iov
= {
4075 .iov_base
= (void *) buf
,
4079 qemu_iovec_init_external(&qiov
, &iov
, 1);
4080 return bdrv_writev_vmstate(bs
, &qiov
, pos
);
4083 int bdrv_writev_vmstate(BlockDriverState
*bs
, QEMUIOVector
*qiov
, int64_t pos
)
4085 BlockDriver
*drv
= bs
->drv
;
4089 } else if (drv
->bdrv_save_vmstate
) {
4090 return drv
->bdrv_save_vmstate(bs
, qiov
, pos
);
4091 } else if (bs
->file
) {
4092 return bdrv_writev_vmstate(bs
->file
, qiov
, pos
);
4098 int bdrv_load_vmstate(BlockDriverState
*bs
, uint8_t *buf
,
4099 int64_t pos
, int size
)
4101 BlockDriver
*drv
= bs
->drv
;
4104 if (drv
->bdrv_load_vmstate
)
4105 return drv
->bdrv_load_vmstate(bs
, buf
, pos
, size
);
4107 return bdrv_load_vmstate(bs
->file
, buf
, pos
, size
);
4111 void bdrv_debug_event(BlockDriverState
*bs
, BlkDebugEvent event
)
4113 if (!bs
|| !bs
->drv
|| !bs
->drv
->bdrv_debug_event
) {
4117 bs
->drv
->bdrv_debug_event(bs
, event
);
4120 int bdrv_debug_breakpoint(BlockDriverState
*bs
, const char *event
,
4123 while (bs
&& bs
->drv
&& !bs
->drv
->bdrv_debug_breakpoint
) {
4127 if (bs
&& bs
->drv
&& bs
->drv
->bdrv_debug_breakpoint
) {
4128 return bs
->drv
->bdrv_debug_breakpoint(bs
, event
, tag
);
4134 int bdrv_debug_remove_breakpoint(BlockDriverState
*bs
, const char *tag
)
4136 while (bs
&& bs
->drv
&& !bs
->drv
->bdrv_debug_remove_breakpoint
) {
4140 if (bs
&& bs
->drv
&& bs
->drv
->bdrv_debug_remove_breakpoint
) {
4141 return bs
->drv
->bdrv_debug_remove_breakpoint(bs
, tag
);
4147 int bdrv_debug_resume(BlockDriverState
*bs
, const char *tag
)
4149 while (bs
&& (!bs
->drv
|| !bs
->drv
->bdrv_debug_resume
)) {
4153 if (bs
&& bs
->drv
&& bs
->drv
->bdrv_debug_resume
) {
4154 return bs
->drv
->bdrv_debug_resume(bs
, tag
);
4160 bool bdrv_debug_is_suspended(BlockDriverState
*bs
, const char *tag
)
4162 while (bs
&& bs
->drv
&& !bs
->drv
->bdrv_debug_is_suspended
) {
4166 if (bs
&& bs
->drv
&& bs
->drv
->bdrv_debug_is_suspended
) {
4167 return bs
->drv
->bdrv_debug_is_suspended(bs
, tag
);
4173 int bdrv_is_snapshot(BlockDriverState
*bs
)
4175 return !!(bs
->open_flags
& BDRV_O_SNAPSHOT
);
4178 /* backing_file can either be relative, or absolute, or a protocol. If it is
4179 * relative, it must be relative to the chain. So, passing in bs->filename
4180 * from a BDS as backing_file should not be done, as that may be relative to
4181 * the CWD rather than the chain. */
4182 BlockDriverState
*bdrv_find_backing_image(BlockDriverState
*bs
,
4183 const char *backing_file
)
4185 char *filename_full
= NULL
;
4186 char *backing_file_full
= NULL
;
4187 char *filename_tmp
= NULL
;
4188 int is_protocol
= 0;
4189 BlockDriverState
*curr_bs
= NULL
;
4190 BlockDriverState
*retval
= NULL
;
4192 if (!bs
|| !bs
->drv
|| !backing_file
) {
4196 filename_full
= g_malloc(PATH_MAX
);
4197 backing_file_full
= g_malloc(PATH_MAX
);
4198 filename_tmp
= g_malloc(PATH_MAX
);
4200 is_protocol
= path_has_protocol(backing_file
);
4202 for (curr_bs
= bs
; curr_bs
->backing_hd
; curr_bs
= curr_bs
->backing_hd
) {
4204 /* If either of the filename paths is actually a protocol, then
4205 * compare unmodified paths; otherwise make paths relative */
4206 if (is_protocol
|| path_has_protocol(curr_bs
->backing_file
)) {
4207 if (strcmp(backing_file
, curr_bs
->backing_file
) == 0) {
4208 retval
= curr_bs
->backing_hd
;
4212 /* If not an absolute filename path, make it relative to the current
4213 * image's filename path */
4214 path_combine(filename_tmp
, PATH_MAX
, curr_bs
->filename
,
4217 /* We are going to compare absolute pathnames */
4218 if (!realpath(filename_tmp
, filename_full
)) {
4222 /* We need to make sure the backing filename we are comparing against
4223 * is relative to the current image filename (or absolute) */
4224 path_combine(filename_tmp
, PATH_MAX
, curr_bs
->filename
,
4225 curr_bs
->backing_file
);
4227 if (!realpath(filename_tmp
, backing_file_full
)) {
4231 if (strcmp(backing_file_full
, filename_full
) == 0) {
4232 retval
= curr_bs
->backing_hd
;
4238 g_free(filename_full
);
4239 g_free(backing_file_full
);
4240 g_free(filename_tmp
);
4244 int bdrv_get_backing_file_depth(BlockDriverState
*bs
)
4250 if (!bs
->backing_hd
) {
4254 return 1 + bdrv_get_backing_file_depth(bs
->backing_hd
);
4257 BlockDriverState
*bdrv_find_base(BlockDriverState
*bs
)
4259 BlockDriverState
*curr_bs
= NULL
;
4267 while (curr_bs
->backing_hd
) {
4268 curr_bs
= curr_bs
->backing_hd
;
4273 /**************************************************************/
4276 BlockDriverAIOCB
*bdrv_aio_readv(BlockDriverState
*bs
, int64_t sector_num
,
4277 QEMUIOVector
*qiov
, int nb_sectors
,
4278 BlockDriverCompletionFunc
*cb
, void *opaque
)
4280 trace_bdrv_aio_readv(bs
, sector_num
, nb_sectors
, opaque
);
4282 return bdrv_co_aio_rw_vector(bs
, sector_num
, qiov
, nb_sectors
, 0,
4286 BlockDriverAIOCB
*bdrv_aio_writev(BlockDriverState
*bs
, int64_t sector_num
,
4287 QEMUIOVector
*qiov
, int nb_sectors
,
4288 BlockDriverCompletionFunc
*cb
, void *opaque
)
4290 trace_bdrv_aio_writev(bs
, sector_num
, nb_sectors
, opaque
);
4292 return bdrv_co_aio_rw_vector(bs
, sector_num
, qiov
, nb_sectors
, 0,
4296 BlockDriverAIOCB
*bdrv_aio_write_zeroes(BlockDriverState
*bs
,
4297 int64_t sector_num
, int nb_sectors
, BdrvRequestFlags flags
,
4298 BlockDriverCompletionFunc
*cb
, void *opaque
)
4300 trace_bdrv_aio_write_zeroes(bs
, sector_num
, nb_sectors
, flags
, opaque
);
4302 return bdrv_co_aio_rw_vector(bs
, sector_num
, NULL
, nb_sectors
,
4303 BDRV_REQ_ZERO_WRITE
| flags
,
4308 typedef struct MultiwriteCB
{
4313 BlockDriverCompletionFunc
*cb
;
4315 QEMUIOVector
*free_qiov
;
4319 static void multiwrite_user_cb(MultiwriteCB
*mcb
)
4323 for (i
= 0; i
< mcb
->num_callbacks
; i
++) {
4324 mcb
->callbacks
[i
].cb(mcb
->callbacks
[i
].opaque
, mcb
->error
);
4325 if (mcb
->callbacks
[i
].free_qiov
) {
4326 qemu_iovec_destroy(mcb
->callbacks
[i
].free_qiov
);
4328 g_free(mcb
->callbacks
[i
].free_qiov
);
4332 static void multiwrite_cb(void *opaque
, int ret
)
4334 MultiwriteCB
*mcb
= opaque
;
4336 trace_multiwrite_cb(mcb
, ret
);
4338 if (ret
< 0 && !mcb
->error
) {
4342 mcb
->num_requests
--;
4343 if (mcb
->num_requests
== 0) {
4344 multiwrite_user_cb(mcb
);
4349 static int multiwrite_req_compare(const void *a
, const void *b
)
4351 const BlockRequest
*req1
= a
, *req2
= b
;
4354 * Note that we can't simply subtract req2->sector from req1->sector
4355 * here as that could overflow the return value.
4357 if (req1
->sector
> req2
->sector
) {
4359 } else if (req1
->sector
< req2
->sector
) {
4367 * Takes a bunch of requests and tries to merge them. Returns the number of
4368 * requests that remain after merging.
4370 static int multiwrite_merge(BlockDriverState
*bs
, BlockRequest
*reqs
,
4371 int num_reqs
, MultiwriteCB
*mcb
)
4375 // Sort requests by start sector
4376 qsort(reqs
, num_reqs
, sizeof(*reqs
), &multiwrite_req_compare
);
4378 // Check if adjacent requests touch the same clusters. If so, combine them,
4379 // filling up gaps with zero sectors.
4381 for (i
= 1; i
< num_reqs
; i
++) {
4383 int64_t oldreq_last
= reqs
[outidx
].sector
+ reqs
[outidx
].nb_sectors
;
4385 // Handle exactly sequential writes and overlapping writes.
4386 if (reqs
[i
].sector
<= oldreq_last
) {
4390 if (reqs
[outidx
].qiov
->niov
+ reqs
[i
].qiov
->niov
+ 1 > IOV_MAX
) {
4396 QEMUIOVector
*qiov
= g_malloc0(sizeof(*qiov
));
4397 qemu_iovec_init(qiov
,
4398 reqs
[outidx
].qiov
->niov
+ reqs
[i
].qiov
->niov
+ 1);
4400 // Add the first request to the merged one. If the requests are
4401 // overlapping, drop the last sectors of the first request.
4402 size
= (reqs
[i
].sector
- reqs
[outidx
].sector
) << 9;
4403 qemu_iovec_concat(qiov
, reqs
[outidx
].qiov
, 0, size
);
4405 // We should need to add any zeros between the two requests
4406 assert (reqs
[i
].sector
<= oldreq_last
);
4408 // Add the second request
4409 qemu_iovec_concat(qiov
, reqs
[i
].qiov
, 0, reqs
[i
].qiov
->size
);
4411 reqs
[outidx
].nb_sectors
= qiov
->size
>> 9;
4412 reqs
[outidx
].qiov
= qiov
;
4414 mcb
->callbacks
[i
].free_qiov
= reqs
[outidx
].qiov
;
4417 reqs
[outidx
].sector
= reqs
[i
].sector
;
4418 reqs
[outidx
].nb_sectors
= reqs
[i
].nb_sectors
;
4419 reqs
[outidx
].qiov
= reqs
[i
].qiov
;
4427 * Submit multiple AIO write requests at once.
4429 * On success, the function returns 0 and all requests in the reqs array have
4430 * been submitted. In error case this function returns -1, and any of the
4431 * requests may or may not be submitted yet. In particular, this means that the
4432 * callback will be called for some of the requests, for others it won't. The
4433 * caller must check the error field of the BlockRequest to wait for the right
4434 * callbacks (if error != 0, no callback will be called).
4436 * The implementation may modify the contents of the reqs array, e.g. to merge
4437 * requests. However, the fields opaque and error are left unmodified as they
4438 * are used to signal failure for a single request to the caller.
4440 int bdrv_aio_multiwrite(BlockDriverState
*bs
, BlockRequest
*reqs
, int num_reqs
)
4445 /* don't submit writes if we don't have a medium */
4446 if (bs
->drv
== NULL
) {
4447 for (i
= 0; i
< num_reqs
; i
++) {
4448 reqs
[i
].error
= -ENOMEDIUM
;
4453 if (num_reqs
== 0) {
4457 // Create MultiwriteCB structure
4458 mcb
= g_malloc0(sizeof(*mcb
) + num_reqs
* sizeof(*mcb
->callbacks
));
4459 mcb
->num_requests
= 0;
4460 mcb
->num_callbacks
= num_reqs
;
4462 for (i
= 0; i
< num_reqs
; i
++) {
4463 mcb
->callbacks
[i
].cb
= reqs
[i
].cb
;
4464 mcb
->callbacks
[i
].opaque
= reqs
[i
].opaque
;
4467 // Check for mergable requests
4468 num_reqs
= multiwrite_merge(bs
, reqs
, num_reqs
, mcb
);
4470 trace_bdrv_aio_multiwrite(mcb
, mcb
->num_callbacks
, num_reqs
);
4472 /* Run the aio requests. */
4473 mcb
->num_requests
= num_reqs
;
4474 for (i
= 0; i
< num_reqs
; i
++) {
4475 bdrv_co_aio_rw_vector(bs
, reqs
[i
].sector
, reqs
[i
].qiov
,
4476 reqs
[i
].nb_sectors
, reqs
[i
].flags
,
4484 void bdrv_aio_cancel(BlockDriverAIOCB
*acb
)
4486 acb
->aiocb_info
->cancel(acb
);
4489 /**************************************************************/
4490 /* async block device emulation */
4492 typedef struct BlockDriverAIOCBSync
{
4493 BlockDriverAIOCB common
;
4496 /* vector translation state */
4500 } BlockDriverAIOCBSync
;
4502 static void bdrv_aio_cancel_em(BlockDriverAIOCB
*blockacb
)
4504 BlockDriverAIOCBSync
*acb
=
4505 container_of(blockacb
, BlockDriverAIOCBSync
, common
);
4506 qemu_bh_delete(acb
->bh
);
4508 qemu_aio_release(acb
);
4511 static const AIOCBInfo bdrv_em_aiocb_info
= {
4512 .aiocb_size
= sizeof(BlockDriverAIOCBSync
),
4513 .cancel
= bdrv_aio_cancel_em
,
4516 static void bdrv_aio_bh_cb(void *opaque
)
4518 BlockDriverAIOCBSync
*acb
= opaque
;
4521 qemu_iovec_from_buf(acb
->qiov
, 0, acb
->bounce
, acb
->qiov
->size
);
4522 qemu_vfree(acb
->bounce
);
4523 acb
->common
.cb(acb
->common
.opaque
, acb
->ret
);
4524 qemu_bh_delete(acb
->bh
);
4526 qemu_aio_release(acb
);
4529 static BlockDriverAIOCB
*bdrv_aio_rw_vector(BlockDriverState
*bs
,
4533 BlockDriverCompletionFunc
*cb
,
4538 BlockDriverAIOCBSync
*acb
;
4540 acb
= qemu_aio_get(&bdrv_em_aiocb_info
, bs
, cb
, opaque
);
4541 acb
->is_write
= is_write
;
4543 acb
->bounce
= qemu_blockalign(bs
, qiov
->size
);
4544 acb
->bh
= qemu_bh_new(bdrv_aio_bh_cb
, acb
);
4547 qemu_iovec_to_buf(acb
->qiov
, 0, acb
->bounce
, qiov
->size
);
4548 acb
->ret
= bs
->drv
->bdrv_write(bs
, sector_num
, acb
->bounce
, nb_sectors
);
4550 acb
->ret
= bs
->drv
->bdrv_read(bs
, sector_num
, acb
->bounce
, nb_sectors
);
4553 qemu_bh_schedule(acb
->bh
);
4555 return &acb
->common
;
4558 static BlockDriverAIOCB
*bdrv_aio_readv_em(BlockDriverState
*bs
,
4559 int64_t sector_num
, QEMUIOVector
*qiov
, int nb_sectors
,
4560 BlockDriverCompletionFunc
*cb
, void *opaque
)
4562 return bdrv_aio_rw_vector(bs
, sector_num
, qiov
, nb_sectors
, cb
, opaque
, 0);
4565 static BlockDriverAIOCB
*bdrv_aio_writev_em(BlockDriverState
*bs
,
4566 int64_t sector_num
, QEMUIOVector
*qiov
, int nb_sectors
,
4567 BlockDriverCompletionFunc
*cb
, void *opaque
)
4569 return bdrv_aio_rw_vector(bs
, sector_num
, qiov
, nb_sectors
, cb
, opaque
, 1);
4573 typedef struct BlockDriverAIOCBCoroutine
{
4574 BlockDriverAIOCB common
;
4579 } BlockDriverAIOCBCoroutine
;
4581 static void bdrv_aio_co_cancel_em(BlockDriverAIOCB
*blockacb
)
4583 BlockDriverAIOCBCoroutine
*acb
=
4584 container_of(blockacb
, BlockDriverAIOCBCoroutine
, common
);
4593 static const AIOCBInfo bdrv_em_co_aiocb_info
= {
4594 .aiocb_size
= sizeof(BlockDriverAIOCBCoroutine
),
4595 .cancel
= bdrv_aio_co_cancel_em
,
4598 static void bdrv_co_em_bh(void *opaque
)
4600 BlockDriverAIOCBCoroutine
*acb
= opaque
;
4602 acb
->common
.cb(acb
->common
.opaque
, acb
->req
.error
);
4608 qemu_bh_delete(acb
->bh
);
4609 qemu_aio_release(acb
);
4612 /* Invoke bdrv_co_do_readv/bdrv_co_do_writev */
4613 static void coroutine_fn
bdrv_co_do_rw(void *opaque
)
4615 BlockDriverAIOCBCoroutine
*acb
= opaque
;
4616 BlockDriverState
*bs
= acb
->common
.bs
;
4618 if (!acb
->is_write
) {
4619 acb
->req
.error
= bdrv_co_do_readv(bs
, acb
->req
.sector
,
4620 acb
->req
.nb_sectors
, acb
->req
.qiov
, acb
->req
.flags
);
4622 acb
->req
.error
= bdrv_co_do_writev(bs
, acb
->req
.sector
,
4623 acb
->req
.nb_sectors
, acb
->req
.qiov
, acb
->req
.flags
);
4626 acb
->bh
= qemu_bh_new(bdrv_co_em_bh
, acb
);
4627 qemu_bh_schedule(acb
->bh
);
4630 static BlockDriverAIOCB
*bdrv_co_aio_rw_vector(BlockDriverState
*bs
,
4634 BdrvRequestFlags flags
,
4635 BlockDriverCompletionFunc
*cb
,
4640 BlockDriverAIOCBCoroutine
*acb
;
4642 acb
= qemu_aio_get(&bdrv_em_co_aiocb_info
, bs
, cb
, opaque
);
4643 acb
->req
.sector
= sector_num
;
4644 acb
->req
.nb_sectors
= nb_sectors
;
4645 acb
->req
.qiov
= qiov
;
4646 acb
->req
.flags
= flags
;
4647 acb
->is_write
= is_write
;
4650 co
= qemu_coroutine_create(bdrv_co_do_rw
);
4651 qemu_coroutine_enter(co
, acb
);
4653 return &acb
->common
;
4656 static void coroutine_fn
bdrv_aio_flush_co_entry(void *opaque
)
4658 BlockDriverAIOCBCoroutine
*acb
= opaque
;
4659 BlockDriverState
*bs
= acb
->common
.bs
;
4661 acb
->req
.error
= bdrv_co_flush(bs
);
4662 acb
->bh
= qemu_bh_new(bdrv_co_em_bh
, acb
);
4663 qemu_bh_schedule(acb
->bh
);
4666 BlockDriverAIOCB
*bdrv_aio_flush(BlockDriverState
*bs
,
4667 BlockDriverCompletionFunc
*cb
, void *opaque
)
4669 trace_bdrv_aio_flush(bs
, opaque
);
4672 BlockDriverAIOCBCoroutine
*acb
;
4674 acb
= qemu_aio_get(&bdrv_em_co_aiocb_info
, bs
, cb
, opaque
);
4677 co
= qemu_coroutine_create(bdrv_aio_flush_co_entry
);
4678 qemu_coroutine_enter(co
, acb
);
4680 return &acb
->common
;
4683 static void coroutine_fn
bdrv_aio_discard_co_entry(void *opaque
)
4685 BlockDriverAIOCBCoroutine
*acb
= opaque
;
4686 BlockDriverState
*bs
= acb
->common
.bs
;
4688 acb
->req
.error
= bdrv_co_discard(bs
, acb
->req
.sector
, acb
->req
.nb_sectors
);
4689 acb
->bh
= qemu_bh_new(bdrv_co_em_bh
, acb
);
4690 qemu_bh_schedule(acb
->bh
);
4693 BlockDriverAIOCB
*bdrv_aio_discard(BlockDriverState
*bs
,
4694 int64_t sector_num
, int nb_sectors
,
4695 BlockDriverCompletionFunc
*cb
, void *opaque
)
4698 BlockDriverAIOCBCoroutine
*acb
;
4700 trace_bdrv_aio_discard(bs
, sector_num
, nb_sectors
, opaque
);
4702 acb
= qemu_aio_get(&bdrv_em_co_aiocb_info
, bs
, cb
, opaque
);
4703 acb
->req
.sector
= sector_num
;
4704 acb
->req
.nb_sectors
= nb_sectors
;
4706 co
= qemu_coroutine_create(bdrv_aio_discard_co_entry
);
4707 qemu_coroutine_enter(co
, acb
);
4709 return &acb
->common
;
4712 void bdrv_init(void)
4714 module_call_init(MODULE_INIT_BLOCK
);
4717 void bdrv_init_with_whitelist(void)
4719 use_bdrv_whitelist
= 1;
4723 void *qemu_aio_get(const AIOCBInfo
*aiocb_info
, BlockDriverState
*bs
,
4724 BlockDriverCompletionFunc
*cb
, void *opaque
)
4726 BlockDriverAIOCB
*acb
;
4728 acb
= g_slice_alloc(aiocb_info
->aiocb_size
);
4729 acb
->aiocb_info
= aiocb_info
;
4732 acb
->opaque
= opaque
;
4736 void qemu_aio_release(void *p
)
4738 BlockDriverAIOCB
*acb
= p
;
4739 g_slice_free1(acb
->aiocb_info
->aiocb_size
, acb
);
4742 /**************************************************************/
4743 /* Coroutine block device emulation */
4745 typedef struct CoroutineIOCompletion
{
4746 Coroutine
*coroutine
;
4748 } CoroutineIOCompletion
;
4750 static void bdrv_co_io_em_complete(void *opaque
, int ret
)
4752 CoroutineIOCompletion
*co
= opaque
;
4755 qemu_coroutine_enter(co
->coroutine
, NULL
);
4758 static int coroutine_fn
bdrv_co_io_em(BlockDriverState
*bs
, int64_t sector_num
,
4759 int nb_sectors
, QEMUIOVector
*iov
,
4762 CoroutineIOCompletion co
= {
4763 .coroutine
= qemu_coroutine_self(),
4765 BlockDriverAIOCB
*acb
;
4768 acb
= bs
->drv
->bdrv_aio_writev(bs
, sector_num
, iov
, nb_sectors
,
4769 bdrv_co_io_em_complete
, &co
);
4771 acb
= bs
->drv
->bdrv_aio_readv(bs
, sector_num
, iov
, nb_sectors
,
4772 bdrv_co_io_em_complete
, &co
);
4775 trace_bdrv_co_io_em(bs
, sector_num
, nb_sectors
, is_write
, acb
);
4779 qemu_coroutine_yield();
4784 static int coroutine_fn
bdrv_co_readv_em(BlockDriverState
*bs
,
4785 int64_t sector_num
, int nb_sectors
,
4788 return bdrv_co_io_em(bs
, sector_num
, nb_sectors
, iov
, false);
4791 static int coroutine_fn
bdrv_co_writev_em(BlockDriverState
*bs
,
4792 int64_t sector_num
, int nb_sectors
,
4795 return bdrv_co_io_em(bs
, sector_num
, nb_sectors
, iov
, true);
4798 static void coroutine_fn
bdrv_flush_co_entry(void *opaque
)
4800 RwCo
*rwco
= opaque
;
4802 rwco
->ret
= bdrv_co_flush(rwco
->bs
);
4805 int coroutine_fn
bdrv_co_flush(BlockDriverState
*bs
)
4809 if (!bs
|| !bdrv_is_inserted(bs
) || bdrv_is_read_only(bs
)) {
4813 /* Write back cached data to the OS even with cache=unsafe */
4814 BLKDBG_EVENT(bs
->file
, BLKDBG_FLUSH_TO_OS
);
4815 if (bs
->drv
->bdrv_co_flush_to_os
) {
4816 ret
= bs
->drv
->bdrv_co_flush_to_os(bs
);
4822 /* But don't actually force it to the disk with cache=unsafe */
4823 if (bs
->open_flags
& BDRV_O_NO_FLUSH
) {
4827 BLKDBG_EVENT(bs
->file
, BLKDBG_FLUSH_TO_DISK
);
4828 if (bs
->drv
->bdrv_co_flush_to_disk
) {
4829 ret
= bs
->drv
->bdrv_co_flush_to_disk(bs
);
4830 } else if (bs
->drv
->bdrv_aio_flush
) {
4831 BlockDriverAIOCB
*acb
;
4832 CoroutineIOCompletion co
= {
4833 .coroutine
= qemu_coroutine_self(),
4836 acb
= bs
->drv
->bdrv_aio_flush(bs
, bdrv_co_io_em_complete
, &co
);
4840 qemu_coroutine_yield();
4845 * Some block drivers always operate in either writethrough or unsafe
4846 * mode and don't support bdrv_flush therefore. Usually qemu doesn't
4847 * know how the server works (because the behaviour is hardcoded or
4848 * depends on server-side configuration), so we can't ensure that
4849 * everything is safe on disk. Returning an error doesn't work because
4850 * that would break guests even if the server operates in writethrough
4853 * Let's hope the user knows what he's doing.
4861 /* Now flush the underlying protocol. It will also have BDRV_O_NO_FLUSH
4862 * in the case of cache=unsafe, so there are no useless flushes.
4865 return bdrv_co_flush(bs
->file
);
4868 void bdrv_invalidate_cache(BlockDriverState
*bs
, Error
**errp
)
4870 Error
*local_err
= NULL
;
4877 if (bs
->drv
->bdrv_invalidate_cache
) {
4878 bs
->drv
->bdrv_invalidate_cache(bs
, &local_err
);
4879 } else if (bs
->file
) {
4880 bdrv_invalidate_cache(bs
->file
, &local_err
);
4883 error_propagate(errp
, local_err
);
4887 ret
= refresh_total_sectors(bs
, bs
->total_sectors
);
4889 error_setg_errno(errp
, -ret
, "Could not refresh total sector count");
4894 void bdrv_invalidate_cache_all(Error
**errp
)
4896 BlockDriverState
*bs
;
4897 Error
*local_err
= NULL
;
4899 QTAILQ_FOREACH(bs
, &bdrv_states
, device_list
) {
4900 bdrv_invalidate_cache(bs
, &local_err
);
4902 error_propagate(errp
, local_err
);
4908 void bdrv_clear_incoming_migration_all(void)
4910 BlockDriverState
*bs
;
4912 QTAILQ_FOREACH(bs
, &bdrv_states
, device_list
) {
4913 bs
->open_flags
= bs
->open_flags
& ~(BDRV_O_INCOMING
);
4917 int bdrv_flush(BlockDriverState
*bs
)
4925 if (qemu_in_coroutine()) {
4926 /* Fast-path if already in coroutine context */
4927 bdrv_flush_co_entry(&rwco
);
4929 co
= qemu_coroutine_create(bdrv_flush_co_entry
);
4930 qemu_coroutine_enter(co
, &rwco
);
4931 while (rwco
.ret
== NOT_DONE
) {
4939 typedef struct DiscardCo
{
4940 BlockDriverState
*bs
;
4945 static void coroutine_fn
bdrv_discard_co_entry(void *opaque
)
4947 DiscardCo
*rwco
= opaque
;
4949 rwco
->ret
= bdrv_co_discard(rwco
->bs
, rwco
->sector_num
, rwco
->nb_sectors
);
4952 /* if no limit is specified in the BlockLimits use a default
4953 * of 32768 512-byte sectors (16 MiB) per request.
4955 #define MAX_DISCARD_DEFAULT 32768
4957 int coroutine_fn
bdrv_co_discard(BlockDriverState
*bs
, int64_t sector_num
,
4964 } else if (bdrv_check_request(bs
, sector_num
, nb_sectors
)) {
4966 } else if (bs
->read_only
) {
4970 bdrv_reset_dirty(bs
, sector_num
, nb_sectors
);
4972 /* Do nothing if disabled. */
4973 if (!(bs
->open_flags
& BDRV_O_UNMAP
)) {
4977 if (!bs
->drv
->bdrv_co_discard
&& !bs
->drv
->bdrv_aio_discard
) {
4981 max_discard
= bs
->bl
.max_discard
? bs
->bl
.max_discard
: MAX_DISCARD_DEFAULT
;
4982 while (nb_sectors
> 0) {
4984 int num
= nb_sectors
;
4987 if (bs
->bl
.discard_alignment
&&
4988 num
>= bs
->bl
.discard_alignment
&&
4989 sector_num
% bs
->bl
.discard_alignment
) {
4990 if (num
> bs
->bl
.discard_alignment
) {
4991 num
= bs
->bl
.discard_alignment
;
4993 num
-= sector_num
% bs
->bl
.discard_alignment
;
4996 /* limit request size */
4997 if (num
> max_discard
) {
5001 if (bs
->drv
->bdrv_co_discard
) {
5002 ret
= bs
->drv
->bdrv_co_discard(bs
, sector_num
, num
);
5004 BlockDriverAIOCB
*acb
;
5005 CoroutineIOCompletion co
= {
5006 .coroutine
= qemu_coroutine_self(),
5009 acb
= bs
->drv
->bdrv_aio_discard(bs
, sector_num
, nb_sectors
,
5010 bdrv_co_io_em_complete
, &co
);
5014 qemu_coroutine_yield();
5018 if (ret
&& ret
!= -ENOTSUP
) {
5028 int bdrv_discard(BlockDriverState
*bs
, int64_t sector_num
, int nb_sectors
)
5033 .sector_num
= sector_num
,
5034 .nb_sectors
= nb_sectors
,
5038 if (qemu_in_coroutine()) {
5039 /* Fast-path if already in coroutine context */
5040 bdrv_discard_co_entry(&rwco
);
5042 co
= qemu_coroutine_create(bdrv_discard_co_entry
);
5043 qemu_coroutine_enter(co
, &rwco
);
5044 while (rwco
.ret
== NOT_DONE
) {
5052 /**************************************************************/
5053 /* removable device support */
5056 * Return TRUE if the media is present
5058 int bdrv_is_inserted(BlockDriverState
*bs
)
5060 BlockDriver
*drv
= bs
->drv
;
5064 if (!drv
->bdrv_is_inserted
)
5066 return drv
->bdrv_is_inserted(bs
);
5070 * Return whether the media changed since the last call to this
5071 * function, or -ENOTSUP if we don't know. Most drivers don't know.
5073 int bdrv_media_changed(BlockDriverState
*bs
)
5075 BlockDriver
*drv
= bs
->drv
;
5077 if (drv
&& drv
->bdrv_media_changed
) {
5078 return drv
->bdrv_media_changed(bs
);
5084 * If eject_flag is TRUE, eject the media. Otherwise, close the tray
5086 void bdrv_eject(BlockDriverState
*bs
, bool eject_flag
)
5088 BlockDriver
*drv
= bs
->drv
;
5090 if (drv
&& drv
->bdrv_eject
) {
5091 drv
->bdrv_eject(bs
, eject_flag
);
5094 if (bs
->device_name
[0] != '\0') {
5095 bdrv_emit_qmp_eject_event(bs
, eject_flag
);
5100 * Lock or unlock the media (if it is locked, the user won't be able
5101 * to eject it manually).
5103 void bdrv_lock_medium(BlockDriverState
*bs
, bool locked
)
5105 BlockDriver
*drv
= bs
->drv
;
5107 trace_bdrv_lock_medium(bs
, locked
);
5109 if (drv
&& drv
->bdrv_lock_medium
) {
5110 drv
->bdrv_lock_medium(bs
, locked
);
5114 /* needed for generic scsi interface */
5116 int bdrv_ioctl(BlockDriverState
*bs
, unsigned long int req
, void *buf
)
5118 BlockDriver
*drv
= bs
->drv
;
5120 if (drv
&& drv
->bdrv_ioctl
)
5121 return drv
->bdrv_ioctl(bs
, req
, buf
);
5125 BlockDriverAIOCB
*bdrv_aio_ioctl(BlockDriverState
*bs
,
5126 unsigned long int req
, void *buf
,
5127 BlockDriverCompletionFunc
*cb
, void *opaque
)
5129 BlockDriver
*drv
= bs
->drv
;
5131 if (drv
&& drv
->bdrv_aio_ioctl
)
5132 return drv
->bdrv_aio_ioctl(bs
, req
, buf
, cb
, opaque
);
5136 void bdrv_set_guest_block_size(BlockDriverState
*bs
, int align
)
5138 bs
->guest_block_size
= align
;
5141 void *qemu_blockalign(BlockDriverState
*bs
, size_t size
)
5143 return qemu_memalign(bdrv_opt_mem_align(bs
), size
);
5147 * Check if all memory in this vector is sector aligned.
5149 bool bdrv_qiov_is_aligned(BlockDriverState
*bs
, QEMUIOVector
*qiov
)
5152 size_t alignment
= bdrv_opt_mem_align(bs
);
5154 for (i
= 0; i
< qiov
->niov
; i
++) {
5155 if ((uintptr_t) qiov
->iov
[i
].iov_base
% alignment
) {
5158 if (qiov
->iov
[i
].iov_len
% alignment
) {
5166 BdrvDirtyBitmap
*bdrv_create_dirty_bitmap(BlockDriverState
*bs
, int granularity
,
5169 int64_t bitmap_size
;
5170 BdrvDirtyBitmap
*bitmap
;
5172 assert((granularity
& (granularity
- 1)) == 0);
5174 granularity
>>= BDRV_SECTOR_BITS
;
5175 assert(granularity
);
5176 bitmap_size
= bdrv_getlength(bs
);
5177 if (bitmap_size
< 0) {
5178 error_setg_errno(errp
, -bitmap_size
, "could not get length of device");
5179 errno
= -bitmap_size
;
5182 bitmap_size
>>= BDRV_SECTOR_BITS
;
5183 bitmap
= g_malloc0(sizeof(BdrvDirtyBitmap
));
5184 bitmap
->bitmap
= hbitmap_alloc(bitmap_size
, ffs(granularity
) - 1);
5185 QLIST_INSERT_HEAD(&bs
->dirty_bitmaps
, bitmap
, list
);
5189 void bdrv_release_dirty_bitmap(BlockDriverState
*bs
, BdrvDirtyBitmap
*bitmap
)
5191 BdrvDirtyBitmap
*bm
, *next
;
5192 QLIST_FOREACH_SAFE(bm
, &bs
->dirty_bitmaps
, list
, next
) {
5194 QLIST_REMOVE(bitmap
, list
);
5195 hbitmap_free(bitmap
->bitmap
);
5202 BlockDirtyInfoList
*bdrv_query_dirty_bitmaps(BlockDriverState
*bs
)
5204 BdrvDirtyBitmap
*bm
;
5205 BlockDirtyInfoList
*list
= NULL
;
5206 BlockDirtyInfoList
**plist
= &list
;
5208 QLIST_FOREACH(bm
, &bs
->dirty_bitmaps
, list
) {
5209 BlockDirtyInfo
*info
= g_malloc0(sizeof(BlockDirtyInfo
));
5210 BlockDirtyInfoList
*entry
= g_malloc0(sizeof(BlockDirtyInfoList
));
5211 info
->count
= bdrv_get_dirty_count(bs
, bm
);
5213 ((int64_t) BDRV_SECTOR_SIZE
<< hbitmap_granularity(bm
->bitmap
));
5214 entry
->value
= info
;
5216 plist
= &entry
->next
;
5222 int bdrv_get_dirty(BlockDriverState
*bs
, BdrvDirtyBitmap
*bitmap
, int64_t sector
)
5225 return hbitmap_get(bitmap
->bitmap
, sector
);
5231 void bdrv_dirty_iter_init(BlockDriverState
*bs
,
5232 BdrvDirtyBitmap
*bitmap
, HBitmapIter
*hbi
)
5234 hbitmap_iter_init(hbi
, bitmap
->bitmap
, 0);
5237 void bdrv_set_dirty(BlockDriverState
*bs
, int64_t cur_sector
,
5240 BdrvDirtyBitmap
*bitmap
;
5241 QLIST_FOREACH(bitmap
, &bs
->dirty_bitmaps
, list
) {
5242 hbitmap_set(bitmap
->bitmap
, cur_sector
, nr_sectors
);
5246 void bdrv_reset_dirty(BlockDriverState
*bs
, int64_t cur_sector
, int nr_sectors
)
5248 BdrvDirtyBitmap
*bitmap
;
5249 QLIST_FOREACH(bitmap
, &bs
->dirty_bitmaps
, list
) {
5250 hbitmap_reset(bitmap
->bitmap
, cur_sector
, nr_sectors
);
5254 int64_t bdrv_get_dirty_count(BlockDriverState
*bs
, BdrvDirtyBitmap
*bitmap
)
5256 return hbitmap_count(bitmap
->bitmap
);
5259 /* Get a reference to bs */
5260 void bdrv_ref(BlockDriverState
*bs
)
5265 /* Release a previously grabbed reference to bs.
5266 * If after releasing, reference count is zero, the BlockDriverState is
5268 void bdrv_unref(BlockDriverState
*bs
)
5270 assert(bs
->refcnt
> 0);
5271 if (--bs
->refcnt
== 0) {
5276 void bdrv_set_in_use(BlockDriverState
*bs
, int in_use
)
5278 assert(bs
->in_use
!= in_use
);
5279 bs
->in_use
= in_use
;
5282 int bdrv_in_use(BlockDriverState
*bs
)
5287 void bdrv_iostatus_enable(BlockDriverState
*bs
)
5289 bs
->iostatus_enabled
= true;
5290 bs
->iostatus
= BLOCK_DEVICE_IO_STATUS_OK
;
5293 /* The I/O status is only enabled if the drive explicitly
5294 * enables it _and_ the VM is configured to stop on errors */
5295 bool bdrv_iostatus_is_enabled(const BlockDriverState
*bs
)
5297 return (bs
->iostatus_enabled
&&
5298 (bs
->on_write_error
== BLOCKDEV_ON_ERROR_ENOSPC
||
5299 bs
->on_write_error
== BLOCKDEV_ON_ERROR_STOP
||
5300 bs
->on_read_error
== BLOCKDEV_ON_ERROR_STOP
));
5303 void bdrv_iostatus_disable(BlockDriverState
*bs
)
5305 bs
->iostatus_enabled
= false;
5308 void bdrv_iostatus_reset(BlockDriverState
*bs
)
5310 if (bdrv_iostatus_is_enabled(bs
)) {
5311 bs
->iostatus
= BLOCK_DEVICE_IO_STATUS_OK
;
5313 block_job_iostatus_reset(bs
->job
);
5318 void bdrv_iostatus_set_err(BlockDriverState
*bs
, int error
)
5320 assert(bdrv_iostatus_is_enabled(bs
));
5321 if (bs
->iostatus
== BLOCK_DEVICE_IO_STATUS_OK
) {
5322 bs
->iostatus
= error
== ENOSPC
? BLOCK_DEVICE_IO_STATUS_NOSPACE
:
5323 BLOCK_DEVICE_IO_STATUS_FAILED
;
5328 bdrv_acct_start(BlockDriverState
*bs
, BlockAcctCookie
*cookie
, int64_t bytes
,
5329 enum BlockAcctType type
)
5331 assert(type
< BDRV_MAX_IOTYPE
);
5333 cookie
->bytes
= bytes
;
5334 cookie
->start_time_ns
= get_clock();
5335 cookie
->type
= type
;
5339 bdrv_acct_done(BlockDriverState
*bs
, BlockAcctCookie
*cookie
)
5341 assert(cookie
->type
< BDRV_MAX_IOTYPE
);
5343 bs
->nr_bytes
[cookie
->type
] += cookie
->bytes
;
5344 bs
->nr_ops
[cookie
->type
]++;
5345 bs
->total_time_ns
[cookie
->type
] += get_clock() - cookie
->start_time_ns
;
5348 void bdrv_img_create(const char *filename
, const char *fmt
,
5349 const char *base_filename
, const char *base_fmt
,
5350 char *options
, uint64_t img_size
, int flags
,
5351 Error
**errp
, bool quiet
)
5353 QEMUOptionParameter
*param
= NULL
, *create_options
= NULL
;
5354 QEMUOptionParameter
*backing_fmt
, *backing_file
, *size
;
5355 BlockDriver
*drv
, *proto_drv
;
5356 BlockDriver
*backing_drv
= NULL
;
5357 Error
*local_err
= NULL
;
5360 /* Find driver and parse its options */
5361 drv
= bdrv_find_format(fmt
);
5363 error_setg(errp
, "Unknown file format '%s'", fmt
);
5367 proto_drv
= bdrv_find_protocol(filename
, true);
5369 error_setg(errp
, "Unknown protocol '%s'", filename
);
5373 create_options
= append_option_parameters(create_options
,
5374 drv
->create_options
);
5375 create_options
= append_option_parameters(create_options
,
5376 proto_drv
->create_options
);
5378 /* Create parameter list with default values */
5379 param
= parse_option_parameters("", create_options
, param
);
5381 set_option_parameter_int(param
, BLOCK_OPT_SIZE
, img_size
);
5383 /* Parse -o options */
5385 param
= parse_option_parameters(options
, create_options
, param
);
5386 if (param
== NULL
) {
5387 error_setg(errp
, "Invalid options for file format '%s'.", fmt
);
5392 if (base_filename
) {
5393 if (set_option_parameter(param
, BLOCK_OPT_BACKING_FILE
,
5395 error_setg(errp
, "Backing file not supported for file format '%s'",
5402 if (set_option_parameter(param
, BLOCK_OPT_BACKING_FMT
, base_fmt
)) {
5403 error_setg(errp
, "Backing file format not supported for file "
5404 "format '%s'", fmt
);
5409 backing_file
= get_option_parameter(param
, BLOCK_OPT_BACKING_FILE
);
5410 if (backing_file
&& backing_file
->value
.s
) {
5411 if (!strcmp(filename
, backing_file
->value
.s
)) {
5412 error_setg(errp
, "Error: Trying to create an image with the "
5413 "same filename as the backing file");
5418 backing_fmt
= get_option_parameter(param
, BLOCK_OPT_BACKING_FMT
);
5419 if (backing_fmt
&& backing_fmt
->value
.s
) {
5420 backing_drv
= bdrv_find_format(backing_fmt
->value
.s
);
5422 error_setg(errp
, "Unknown backing file format '%s'",
5423 backing_fmt
->value
.s
);
5428 // The size for the image must always be specified, with one exception:
5429 // If we are using a backing file, we can obtain the size from there
5430 size
= get_option_parameter(param
, BLOCK_OPT_SIZE
);
5431 if (size
&& size
->value
.n
== -1) {
5432 if (backing_file
&& backing_file
->value
.s
) {
5433 BlockDriverState
*bs
;
5438 /* backing files always opened read-only */
5440 flags
& ~(BDRV_O_RDWR
| BDRV_O_SNAPSHOT
| BDRV_O_NO_BACKING
);
5443 ret
= bdrv_open(&bs
, backing_file
->value
.s
, NULL
, NULL
, back_flags
,
5444 backing_drv
, &local_err
);
5446 error_setg_errno(errp
, -ret
, "Could not open '%s': %s",
5447 backing_file
->value
.s
,
5448 error_get_pretty(local_err
));
5449 error_free(local_err
);
5453 bdrv_get_geometry(bs
, &size
);
5456 snprintf(buf
, sizeof(buf
), "%" PRId64
, size
);
5457 set_option_parameter(param
, BLOCK_OPT_SIZE
, buf
);
5461 error_setg(errp
, "Image creation needs a size parameter");
5467 printf("Formatting '%s', fmt=%s ", filename
, fmt
);
5468 print_option_parameters(param
);
5471 ret
= bdrv_create(drv
, filename
, param
, &local_err
);
5472 if (ret
== -EFBIG
) {
5473 /* This is generally a better message than whatever the driver would
5474 * deliver (especially because of the cluster_size_hint), since that
5475 * is most probably not much different from "image too large". */
5476 const char *cluster_size_hint
= "";
5477 if (get_option_parameter(create_options
, BLOCK_OPT_CLUSTER_SIZE
)) {
5478 cluster_size_hint
= " (try using a larger cluster size)";
5480 error_setg(errp
, "The image size is too large for file format '%s'"
5481 "%s", fmt
, cluster_size_hint
);
5482 error_free(local_err
);
5487 free_option_parameters(create_options
);
5488 free_option_parameters(param
);
5491 error_propagate(errp
, local_err
);
5495 AioContext
*bdrv_get_aio_context(BlockDriverState
*bs
)
5497 /* Currently BlockDriverState always uses the main loop AioContext */
5498 return qemu_get_aio_context();
5501 void bdrv_add_before_write_notifier(BlockDriverState
*bs
,
5502 NotifierWithReturn
*notifier
)
5504 notifier_with_return_list_add(&bs
->before_write_notifiers
, notifier
);
5507 int bdrv_amend_options(BlockDriverState
*bs
, QEMUOptionParameter
*options
)
5509 if (bs
->drv
->bdrv_amend_options
== NULL
) {
5512 return bs
->drv
->bdrv_amend_options(bs
, options
);
5515 /* This function will be called by the bdrv_recurse_is_first_non_filter method
5516 * of block filter and by bdrv_is_first_non_filter.
5517 * It is used to test if the given bs is the candidate or recurse more in the
5520 bool bdrv_recurse_is_first_non_filter(BlockDriverState
*bs
,
5521 BlockDriverState
*candidate
)
5523 /* return false if basic checks fails */
5524 if (!bs
|| !bs
->drv
) {
5528 /* the code reached a non block filter driver -> check if the bs is
5529 * the same as the candidate. It's the recursion termination condition.
5531 if (!bs
->drv
->is_filter
) {
5532 return bs
== candidate
;
5534 /* Down this path the driver is a block filter driver */
5536 /* If the block filter recursion method is defined use it to recurse down
5539 if (bs
->drv
->bdrv_recurse_is_first_non_filter
) {
5540 return bs
->drv
->bdrv_recurse_is_first_non_filter(bs
, candidate
);
5543 /* the driver is a block filter but don't allow to recurse -> return false
5548 /* This function checks if the candidate is the first non filter bs down it's
5549 * bs chain. Since we don't have pointers to parents it explore all bs chains
5550 * from the top. Some filters can choose not to pass down the recursion.
5552 bool bdrv_is_first_non_filter(BlockDriverState
*candidate
)
5554 BlockDriverState
*bs
;
5556 /* walk down the bs forest recursively */
5557 QTAILQ_FOREACH(bs
, &bdrv_states
, device_list
) {
5560 /* try to recurse in this top level bs */
5561 perm
= bdrv_recurse_is_first_non_filter(bs
, candidate
);
5563 /* candidate is the first non filter */