hw: replace most use of qemu_chr_fe_write with qemu_chr_fe_write_all
[qemu.git] / hw / char / parallel.c
blobda22e363560279b85ff20c6ab20ca7f46921feb6
1 /*
2 * QEMU Parallel PORT emulation
4 * Copyright (c) 2003-2005 Fabrice Bellard
5 * Copyright (c) 2007 Marko Kohtala
7 * Permission is hereby granted, free of charge, to any person obtaining a copy
8 * of this software and associated documentation files (the "Software"), to deal
9 * in the Software without restriction, including without limitation the rights
10 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
11 * copies of the Software, and to permit persons to whom the Software is
12 * furnished to do so, subject to the following conditions:
14 * The above copyright notice and this permission notice shall be included in
15 * all copies or substantial portions of the Software.
17 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
18 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
19 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
20 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
21 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
22 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
23 * THE SOFTWARE.
25 #include "qemu/osdep.h"
26 #include "qapi/error.h"
27 #include "hw/hw.h"
28 #include "sysemu/char.h"
29 #include "hw/isa/isa.h"
30 #include "hw/i386/pc.h"
31 #include "sysemu/sysemu.h"
33 //#define DEBUG_PARALLEL
35 #ifdef DEBUG_PARALLEL
36 #define pdebug(fmt, ...) printf("pp: " fmt, ## __VA_ARGS__)
37 #else
38 #define pdebug(fmt, ...) ((void)0)
39 #endif
41 #define PARA_REG_DATA 0
42 #define PARA_REG_STS 1
43 #define PARA_REG_CTR 2
44 #define PARA_REG_EPP_ADDR 3
45 #define PARA_REG_EPP_DATA 4
48 * These are the definitions for the Printer Status Register
50 #define PARA_STS_BUSY 0x80 /* Busy complement */
51 #define PARA_STS_ACK 0x40 /* Acknowledge */
52 #define PARA_STS_PAPER 0x20 /* Out of paper */
53 #define PARA_STS_ONLINE 0x10 /* Online */
54 #define PARA_STS_ERROR 0x08 /* Error complement */
55 #define PARA_STS_TMOUT 0x01 /* EPP timeout */
58 * These are the definitions for the Printer Control Register
60 #define PARA_CTR_DIR 0x20 /* Direction (1=read, 0=write) */
61 #define PARA_CTR_INTEN 0x10 /* IRQ Enable */
62 #define PARA_CTR_SELECT 0x08 /* Select In complement */
63 #define PARA_CTR_INIT 0x04 /* Initialize Printer complement */
64 #define PARA_CTR_AUTOLF 0x02 /* Auto linefeed complement */
65 #define PARA_CTR_STROBE 0x01 /* Strobe complement */
67 #define PARA_CTR_SIGNAL (PARA_CTR_SELECT|PARA_CTR_INIT|PARA_CTR_AUTOLF|PARA_CTR_STROBE)
69 typedef struct ParallelState {
70 MemoryRegion iomem;
71 uint8_t dataw;
72 uint8_t datar;
73 uint8_t status;
74 uint8_t control;
75 qemu_irq irq;
76 int irq_pending;
77 CharDriverState *chr;
78 int hw_driver;
79 int epp_timeout;
80 uint32_t last_read_offset; /* For debugging */
81 /* Memory-mapped interface */
82 int it_shift;
83 PortioList portio_list;
84 } ParallelState;
86 #define TYPE_ISA_PARALLEL "isa-parallel"
87 #define ISA_PARALLEL(obj) \
88 OBJECT_CHECK(ISAParallelState, (obj), TYPE_ISA_PARALLEL)
90 typedef struct ISAParallelState {
91 ISADevice parent_obj;
93 uint32_t index;
94 uint32_t iobase;
95 uint32_t isairq;
96 ParallelState state;
97 } ISAParallelState;
99 static void parallel_update_irq(ParallelState *s)
101 if (s->irq_pending)
102 qemu_irq_raise(s->irq);
103 else
104 qemu_irq_lower(s->irq);
107 static void
108 parallel_ioport_write_sw(void *opaque, uint32_t addr, uint32_t val)
110 ParallelState *s = opaque;
112 pdebug("write addr=0x%02x val=0x%02x\n", addr, val);
114 addr &= 7;
115 switch(addr) {
116 case PARA_REG_DATA:
117 s->dataw = val;
118 parallel_update_irq(s);
119 break;
120 case PARA_REG_CTR:
121 val |= 0xc0;
122 if ((val & PARA_CTR_INIT) == 0 ) {
123 s->status = PARA_STS_BUSY;
124 s->status |= PARA_STS_ACK;
125 s->status |= PARA_STS_ONLINE;
126 s->status |= PARA_STS_ERROR;
128 else if (val & PARA_CTR_SELECT) {
129 if (val & PARA_CTR_STROBE) {
130 s->status &= ~PARA_STS_BUSY;
131 if ((s->control & PARA_CTR_STROBE) == 0)
132 /* XXX this blocks entire thread. Rewrite to use
133 * qemu_chr_fe_write and background I/O callbacks */
134 qemu_chr_fe_write_all(s->chr, &s->dataw, 1);
135 } else {
136 if (s->control & PARA_CTR_INTEN) {
137 s->irq_pending = 1;
141 parallel_update_irq(s);
142 s->control = val;
143 break;
147 static void parallel_ioport_write_hw(void *opaque, uint32_t addr, uint32_t val)
149 ParallelState *s = opaque;
150 uint8_t parm = val;
151 int dir;
153 /* Sometimes programs do several writes for timing purposes on old
154 HW. Take care not to waste time on writes that do nothing. */
156 s->last_read_offset = ~0U;
158 addr &= 7;
159 switch(addr) {
160 case PARA_REG_DATA:
161 if (s->dataw == val)
162 return;
163 pdebug("wd%02x\n", val);
164 qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_PP_WRITE_DATA, &parm);
165 s->dataw = val;
166 break;
167 case PARA_REG_STS:
168 pdebug("ws%02x\n", val);
169 if (val & PARA_STS_TMOUT)
170 s->epp_timeout = 0;
171 break;
172 case PARA_REG_CTR:
173 val |= 0xc0;
174 if (s->control == val)
175 return;
176 pdebug("wc%02x\n", val);
178 if ((val & PARA_CTR_DIR) != (s->control & PARA_CTR_DIR)) {
179 if (val & PARA_CTR_DIR) {
180 dir = 1;
181 } else {
182 dir = 0;
184 qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_PP_DATA_DIR, &dir);
185 parm &= ~PARA_CTR_DIR;
188 qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_PP_WRITE_CONTROL, &parm);
189 s->control = val;
190 break;
191 case PARA_REG_EPP_ADDR:
192 if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != PARA_CTR_INIT)
193 /* Controls not correct for EPP address cycle, so do nothing */
194 pdebug("wa%02x s\n", val);
195 else {
196 struct ParallelIOArg ioarg = { .buffer = &parm, .count = 1 };
197 if (qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_PP_EPP_WRITE_ADDR, &ioarg)) {
198 s->epp_timeout = 1;
199 pdebug("wa%02x t\n", val);
201 else
202 pdebug("wa%02x\n", val);
204 break;
205 case PARA_REG_EPP_DATA:
206 if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != PARA_CTR_INIT)
207 /* Controls not correct for EPP data cycle, so do nothing */
208 pdebug("we%02x s\n", val);
209 else {
210 struct ParallelIOArg ioarg = { .buffer = &parm, .count = 1 };
211 if (qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_PP_EPP_WRITE, &ioarg)) {
212 s->epp_timeout = 1;
213 pdebug("we%02x t\n", val);
215 else
216 pdebug("we%02x\n", val);
218 break;
222 static void
223 parallel_ioport_eppdata_write_hw2(void *opaque, uint32_t addr, uint32_t val)
225 ParallelState *s = opaque;
226 uint16_t eppdata = cpu_to_le16(val);
227 int err;
228 struct ParallelIOArg ioarg = {
229 .buffer = &eppdata, .count = sizeof(eppdata)
231 if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != PARA_CTR_INIT) {
232 /* Controls not correct for EPP data cycle, so do nothing */
233 pdebug("we%04x s\n", val);
234 return;
236 err = qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_PP_EPP_WRITE, &ioarg);
237 if (err) {
238 s->epp_timeout = 1;
239 pdebug("we%04x t\n", val);
241 else
242 pdebug("we%04x\n", val);
245 static void
246 parallel_ioport_eppdata_write_hw4(void *opaque, uint32_t addr, uint32_t val)
248 ParallelState *s = opaque;
249 uint32_t eppdata = cpu_to_le32(val);
250 int err;
251 struct ParallelIOArg ioarg = {
252 .buffer = &eppdata, .count = sizeof(eppdata)
254 if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != PARA_CTR_INIT) {
255 /* Controls not correct for EPP data cycle, so do nothing */
256 pdebug("we%08x s\n", val);
257 return;
259 err = qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_PP_EPP_WRITE, &ioarg);
260 if (err) {
261 s->epp_timeout = 1;
262 pdebug("we%08x t\n", val);
264 else
265 pdebug("we%08x\n", val);
268 static uint32_t parallel_ioport_read_sw(void *opaque, uint32_t addr)
270 ParallelState *s = opaque;
271 uint32_t ret = 0xff;
273 addr &= 7;
274 switch(addr) {
275 case PARA_REG_DATA:
276 if (s->control & PARA_CTR_DIR)
277 ret = s->datar;
278 else
279 ret = s->dataw;
280 break;
281 case PARA_REG_STS:
282 ret = s->status;
283 s->irq_pending = 0;
284 if ((s->status & PARA_STS_BUSY) == 0 && (s->control & PARA_CTR_STROBE) == 0) {
285 /* XXX Fixme: wait 5 microseconds */
286 if (s->status & PARA_STS_ACK)
287 s->status &= ~PARA_STS_ACK;
288 else {
289 /* XXX Fixme: wait 5 microseconds */
290 s->status |= PARA_STS_ACK;
291 s->status |= PARA_STS_BUSY;
294 parallel_update_irq(s);
295 break;
296 case PARA_REG_CTR:
297 ret = s->control;
298 break;
300 pdebug("read addr=0x%02x val=0x%02x\n", addr, ret);
301 return ret;
304 static uint32_t parallel_ioport_read_hw(void *opaque, uint32_t addr)
306 ParallelState *s = opaque;
307 uint8_t ret = 0xff;
308 addr &= 7;
309 switch(addr) {
310 case PARA_REG_DATA:
311 qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_PP_READ_DATA, &ret);
312 if (s->last_read_offset != addr || s->datar != ret)
313 pdebug("rd%02x\n", ret);
314 s->datar = ret;
315 break;
316 case PARA_REG_STS:
317 qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_PP_READ_STATUS, &ret);
318 ret &= ~PARA_STS_TMOUT;
319 if (s->epp_timeout)
320 ret |= PARA_STS_TMOUT;
321 if (s->last_read_offset != addr || s->status != ret)
322 pdebug("rs%02x\n", ret);
323 s->status = ret;
324 break;
325 case PARA_REG_CTR:
326 /* s->control has some bits fixed to 1. It is zero only when
327 it has not been yet written to. */
328 if (s->control == 0) {
329 qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_PP_READ_CONTROL, &ret);
330 if (s->last_read_offset != addr)
331 pdebug("rc%02x\n", ret);
332 s->control = ret;
334 else {
335 ret = s->control;
336 if (s->last_read_offset != addr)
337 pdebug("rc%02x\n", ret);
339 break;
340 case PARA_REG_EPP_ADDR:
341 if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != (PARA_CTR_DIR|PARA_CTR_INIT))
342 /* Controls not correct for EPP addr cycle, so do nothing */
343 pdebug("ra%02x s\n", ret);
344 else {
345 struct ParallelIOArg ioarg = { .buffer = &ret, .count = 1 };
346 if (qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_PP_EPP_READ_ADDR, &ioarg)) {
347 s->epp_timeout = 1;
348 pdebug("ra%02x t\n", ret);
350 else
351 pdebug("ra%02x\n", ret);
353 break;
354 case PARA_REG_EPP_DATA:
355 if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != (PARA_CTR_DIR|PARA_CTR_INIT))
356 /* Controls not correct for EPP data cycle, so do nothing */
357 pdebug("re%02x s\n", ret);
358 else {
359 struct ParallelIOArg ioarg = { .buffer = &ret, .count = 1 };
360 if (qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_PP_EPP_READ, &ioarg)) {
361 s->epp_timeout = 1;
362 pdebug("re%02x t\n", ret);
364 else
365 pdebug("re%02x\n", ret);
367 break;
369 s->last_read_offset = addr;
370 return ret;
373 static uint32_t
374 parallel_ioport_eppdata_read_hw2(void *opaque, uint32_t addr)
376 ParallelState *s = opaque;
377 uint32_t ret;
378 uint16_t eppdata = ~0;
379 int err;
380 struct ParallelIOArg ioarg = {
381 .buffer = &eppdata, .count = sizeof(eppdata)
383 if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != (PARA_CTR_DIR|PARA_CTR_INIT)) {
384 /* Controls not correct for EPP data cycle, so do nothing */
385 pdebug("re%04x s\n", eppdata);
386 return eppdata;
388 err = qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_PP_EPP_READ, &ioarg);
389 ret = le16_to_cpu(eppdata);
391 if (err) {
392 s->epp_timeout = 1;
393 pdebug("re%04x t\n", ret);
395 else
396 pdebug("re%04x\n", ret);
397 return ret;
400 static uint32_t
401 parallel_ioport_eppdata_read_hw4(void *opaque, uint32_t addr)
403 ParallelState *s = opaque;
404 uint32_t ret;
405 uint32_t eppdata = ~0U;
406 int err;
407 struct ParallelIOArg ioarg = {
408 .buffer = &eppdata, .count = sizeof(eppdata)
410 if ((s->control & (PARA_CTR_DIR|PARA_CTR_SIGNAL)) != (PARA_CTR_DIR|PARA_CTR_INIT)) {
411 /* Controls not correct for EPP data cycle, so do nothing */
412 pdebug("re%08x s\n", eppdata);
413 return eppdata;
415 err = qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_PP_EPP_READ, &ioarg);
416 ret = le32_to_cpu(eppdata);
418 if (err) {
419 s->epp_timeout = 1;
420 pdebug("re%08x t\n", ret);
422 else
423 pdebug("re%08x\n", ret);
424 return ret;
427 static void parallel_ioport_ecp_write(void *opaque, uint32_t addr, uint32_t val)
429 pdebug("wecp%d=%02x\n", addr & 7, val);
432 static uint32_t parallel_ioport_ecp_read(void *opaque, uint32_t addr)
434 uint8_t ret = 0xff;
436 pdebug("recp%d:%02x\n", addr & 7, ret);
437 return ret;
440 static void parallel_reset(void *opaque)
442 ParallelState *s = opaque;
444 s->datar = ~0;
445 s->dataw = ~0;
446 s->status = PARA_STS_BUSY;
447 s->status |= PARA_STS_ACK;
448 s->status |= PARA_STS_ONLINE;
449 s->status |= PARA_STS_ERROR;
450 s->status |= PARA_STS_TMOUT;
451 s->control = PARA_CTR_SELECT;
452 s->control |= PARA_CTR_INIT;
453 s->control |= 0xc0;
454 s->irq_pending = 0;
455 s->hw_driver = 0;
456 s->epp_timeout = 0;
457 s->last_read_offset = ~0U;
460 static const int isa_parallel_io[MAX_PARALLEL_PORTS] = { 0x378, 0x278, 0x3bc };
462 static const MemoryRegionPortio isa_parallel_portio_hw_list[] = {
463 { 0, 8, 1,
464 .read = parallel_ioport_read_hw,
465 .write = parallel_ioport_write_hw },
466 { 4, 1, 2,
467 .read = parallel_ioport_eppdata_read_hw2,
468 .write = parallel_ioport_eppdata_write_hw2 },
469 { 4, 1, 4,
470 .read = parallel_ioport_eppdata_read_hw4,
471 .write = parallel_ioport_eppdata_write_hw4 },
472 { 0x400, 8, 1,
473 .read = parallel_ioport_ecp_read,
474 .write = parallel_ioport_ecp_write },
475 PORTIO_END_OF_LIST(),
478 static const MemoryRegionPortio isa_parallel_portio_sw_list[] = {
479 { 0, 8, 1,
480 .read = parallel_ioport_read_sw,
481 .write = parallel_ioport_write_sw },
482 PORTIO_END_OF_LIST(),
486 static const VMStateDescription vmstate_parallel_isa = {
487 .name = "parallel_isa",
488 .version_id = 1,
489 .minimum_version_id = 1,
490 .fields = (VMStateField[]) {
491 VMSTATE_UINT8(state.dataw, ISAParallelState),
492 VMSTATE_UINT8(state.datar, ISAParallelState),
493 VMSTATE_UINT8(state.status, ISAParallelState),
494 VMSTATE_UINT8(state.control, ISAParallelState),
495 VMSTATE_INT32(state.irq_pending, ISAParallelState),
496 VMSTATE_INT32(state.epp_timeout, ISAParallelState),
497 VMSTATE_END_OF_LIST()
502 static void parallel_isa_realizefn(DeviceState *dev, Error **errp)
504 static int index;
505 ISADevice *isadev = ISA_DEVICE(dev);
506 ISAParallelState *isa = ISA_PARALLEL(dev);
507 ParallelState *s = &isa->state;
508 int base;
509 uint8_t dummy;
511 if (!s->chr) {
512 error_setg(errp, "Can't create parallel device, empty char device");
513 return;
516 if (isa->index == -1) {
517 isa->index = index;
519 if (isa->index >= MAX_PARALLEL_PORTS) {
520 error_setg(errp, "Max. supported number of parallel ports is %d.",
521 MAX_PARALLEL_PORTS);
522 return;
524 if (isa->iobase == -1) {
525 isa->iobase = isa_parallel_io[isa->index];
527 index++;
529 base = isa->iobase;
530 isa_init_irq(isadev, &s->irq, isa->isairq);
531 qemu_register_reset(parallel_reset, s);
533 if (qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_PP_READ_STATUS, &dummy) == 0) {
534 s->hw_driver = 1;
535 s->status = dummy;
538 isa_register_portio_list(isadev, &s->portio_list, base,
539 (s->hw_driver
540 ? &isa_parallel_portio_hw_list[0]
541 : &isa_parallel_portio_sw_list[0]),
542 s, "parallel");
545 /* Memory mapped interface */
546 static uint32_t parallel_mm_readb (void *opaque, hwaddr addr)
548 ParallelState *s = opaque;
550 return parallel_ioport_read_sw(s, addr >> s->it_shift) & 0xFF;
553 static void parallel_mm_writeb (void *opaque,
554 hwaddr addr, uint32_t value)
556 ParallelState *s = opaque;
558 parallel_ioport_write_sw(s, addr >> s->it_shift, value & 0xFF);
561 static uint32_t parallel_mm_readw (void *opaque, hwaddr addr)
563 ParallelState *s = opaque;
565 return parallel_ioport_read_sw(s, addr >> s->it_shift) & 0xFFFF;
568 static void parallel_mm_writew (void *opaque,
569 hwaddr addr, uint32_t value)
571 ParallelState *s = opaque;
573 parallel_ioport_write_sw(s, addr >> s->it_shift, value & 0xFFFF);
576 static uint32_t parallel_mm_readl (void *opaque, hwaddr addr)
578 ParallelState *s = opaque;
580 return parallel_ioport_read_sw(s, addr >> s->it_shift);
583 static void parallel_mm_writel (void *opaque,
584 hwaddr addr, uint32_t value)
586 ParallelState *s = opaque;
588 parallel_ioport_write_sw(s, addr >> s->it_shift, value);
591 static const MemoryRegionOps parallel_mm_ops = {
592 .old_mmio = {
593 .read = { parallel_mm_readb, parallel_mm_readw, parallel_mm_readl },
594 .write = { parallel_mm_writeb, parallel_mm_writew, parallel_mm_writel },
596 .endianness = DEVICE_NATIVE_ENDIAN,
599 /* If fd is zero, it means that the parallel device uses the console */
600 bool parallel_mm_init(MemoryRegion *address_space,
601 hwaddr base, int it_shift, qemu_irq irq,
602 CharDriverState *chr)
604 ParallelState *s;
606 s = g_malloc0(sizeof(ParallelState));
607 s->irq = irq;
608 s->chr = chr;
609 s->it_shift = it_shift;
610 qemu_register_reset(parallel_reset, s);
612 memory_region_init_io(&s->iomem, NULL, &parallel_mm_ops, s,
613 "parallel", 8 << it_shift);
614 memory_region_add_subregion(address_space, base, &s->iomem);
615 return true;
618 static Property parallel_isa_properties[] = {
619 DEFINE_PROP_UINT32("index", ISAParallelState, index, -1),
620 DEFINE_PROP_UINT32("iobase", ISAParallelState, iobase, -1),
621 DEFINE_PROP_UINT32("irq", ISAParallelState, isairq, 7),
622 DEFINE_PROP_CHR("chardev", ISAParallelState, state.chr),
623 DEFINE_PROP_END_OF_LIST(),
626 static void parallel_isa_class_initfn(ObjectClass *klass, void *data)
628 DeviceClass *dc = DEVICE_CLASS(klass);
630 dc->realize = parallel_isa_realizefn;
631 dc->vmsd = &vmstate_parallel_isa;
632 dc->props = parallel_isa_properties;
633 set_bit(DEVICE_CATEGORY_INPUT, dc->categories);
636 static const TypeInfo parallel_isa_info = {
637 .name = TYPE_ISA_PARALLEL,
638 .parent = TYPE_ISA_DEVICE,
639 .instance_size = sizeof(ISAParallelState),
640 .class_init = parallel_isa_class_initfn,
643 static void parallel_register_types(void)
645 type_register_static(&parallel_isa_info);
648 type_init(parallel_register_types)