char: check for initial_reset_issued unnecessary
[qemu.git] / hw / pc.c
blob408d6d622faa86c3a010304917983feef3dbafc0
1 /*
2 * QEMU PC System Emulator
4 * Copyright (c) 2003-2004 Fabrice Bellard
6 * Permission is hereby granted, free of charge, to any person obtaining a copy
7 * of this software and associated documentation files (the "Software"), to deal
8 * in the Software without restriction, including without limitation the rights
9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10 * copies of the Software, and to permit persons to whom the Software is
11 * furnished to do so, subject to the following conditions:
13 * The above copyright notice and this permission notice shall be included in
14 * all copies or substantial portions of the Software.
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
22 * THE SOFTWARE.
24 #include "hw.h"
25 #include "pc.h"
26 #include "fdc.h"
27 #include "pci.h"
28 #include "block.h"
29 #include "sysemu.h"
30 #include "audio/audio.h"
31 #include "net.h"
32 #include "smbus.h"
33 #include "boards.h"
34 #include "monitor.h"
35 #include "fw_cfg.h"
36 #include "hpet_emul.h"
37 #include "watchdog.h"
38 #include "smbios.h"
39 #include "ide.h"
40 #include "loader.h"
41 #include "elf.h"
43 /* output Bochs bios info messages */
44 //#define DEBUG_BIOS
46 /* Show multiboot debug output */
47 //#define DEBUG_MULTIBOOT
49 #define BIOS_FILENAME "bios.bin"
50 #define VGABIOS_FILENAME "vgabios.bin"
51 #define VGABIOS_CIRRUS_FILENAME "vgabios-cirrus.bin"
53 #define PC_MAX_BIOS_SIZE (4 * 1024 * 1024)
55 /* Leave a chunk of memory at the top of RAM for the BIOS ACPI tables. */
56 #define ACPI_DATA_SIZE 0x10000
57 #define BIOS_CFG_IOPORT 0x510
58 #define FW_CFG_ACPI_TABLES (FW_CFG_ARCH_LOCAL + 0)
59 #define FW_CFG_SMBIOS_ENTRIES (FW_CFG_ARCH_LOCAL + 1)
60 #define FW_CFG_IRQ0_OVERRIDE (FW_CFG_ARCH_LOCAL + 2)
62 #define MAX_IDE_BUS 2
64 static fdctrl_t *floppy_controller;
65 static RTCState *rtc_state;
66 static PITState *pit;
67 static PCII440FXState *i440fx_state;
69 typedef struct isa_irq_state {
70 qemu_irq *i8259;
71 qemu_irq *ioapic;
72 } IsaIrqState;
74 static void isa_irq_handler(void *opaque, int n, int level)
76 IsaIrqState *isa = (IsaIrqState *)opaque;
78 if (n < 16) {
79 qemu_set_irq(isa->i8259[n], level);
81 if (isa->ioapic)
82 qemu_set_irq(isa->ioapic[n], level);
85 static void ioport80_write(void *opaque, uint32_t addr, uint32_t data)
89 /* MSDOS compatibility mode FPU exception support */
90 static qemu_irq ferr_irq;
91 /* XXX: add IGNNE support */
92 void cpu_set_ferr(CPUX86State *s)
94 qemu_irq_raise(ferr_irq);
97 static void ioportF0_write(void *opaque, uint32_t addr, uint32_t data)
99 qemu_irq_lower(ferr_irq);
102 /* TSC handling */
103 uint64_t cpu_get_tsc(CPUX86State *env)
105 return cpu_get_ticks();
108 /* SMM support */
109 void cpu_smm_update(CPUState *env)
111 if (i440fx_state && env == first_cpu)
112 i440fx_set_smm(i440fx_state, (env->hflags >> HF_SMM_SHIFT) & 1);
116 /* IRQ handling */
117 int cpu_get_pic_interrupt(CPUState *env)
119 int intno;
121 intno = apic_get_interrupt(env);
122 if (intno >= 0) {
123 /* set irq request if a PIC irq is still pending */
124 /* XXX: improve that */
125 pic_update_irq(isa_pic);
126 return intno;
128 /* read the irq from the PIC */
129 if (!apic_accept_pic_intr(env))
130 return -1;
132 intno = pic_read_irq(isa_pic);
133 return intno;
136 static void pic_irq_request(void *opaque, int irq, int level)
138 CPUState *env = first_cpu;
140 if (env->apic_state) {
141 while (env) {
142 if (apic_accept_pic_intr(env))
143 apic_deliver_pic_intr(env, level);
144 env = env->next_cpu;
146 } else {
147 if (level)
148 cpu_interrupt(env, CPU_INTERRUPT_HARD);
149 else
150 cpu_reset_interrupt(env, CPU_INTERRUPT_HARD);
154 /* PC cmos mappings */
156 #define REG_EQUIPMENT_BYTE 0x14
158 static int cmos_get_fd_drive_type(int fd0)
160 int val;
162 switch (fd0) {
163 case 0:
164 /* 1.44 Mb 3"5 drive */
165 val = 4;
166 break;
167 case 1:
168 /* 2.88 Mb 3"5 drive */
169 val = 5;
170 break;
171 case 2:
172 /* 1.2 Mb 5"5 drive */
173 val = 2;
174 break;
175 default:
176 val = 0;
177 break;
179 return val;
182 static void cmos_init_hd(int type_ofs, int info_ofs, BlockDriverState *hd)
184 RTCState *s = rtc_state;
185 int cylinders, heads, sectors;
186 bdrv_get_geometry_hint(hd, &cylinders, &heads, &sectors);
187 rtc_set_memory(s, type_ofs, 47);
188 rtc_set_memory(s, info_ofs, cylinders);
189 rtc_set_memory(s, info_ofs + 1, cylinders >> 8);
190 rtc_set_memory(s, info_ofs + 2, heads);
191 rtc_set_memory(s, info_ofs + 3, 0xff);
192 rtc_set_memory(s, info_ofs + 4, 0xff);
193 rtc_set_memory(s, info_ofs + 5, 0xc0 | ((heads > 8) << 3));
194 rtc_set_memory(s, info_ofs + 6, cylinders);
195 rtc_set_memory(s, info_ofs + 7, cylinders >> 8);
196 rtc_set_memory(s, info_ofs + 8, sectors);
199 /* convert boot_device letter to something recognizable by the bios */
200 static int boot_device2nibble(char boot_device)
202 switch(boot_device) {
203 case 'a':
204 case 'b':
205 return 0x01; /* floppy boot */
206 case 'c':
207 return 0x02; /* hard drive boot */
208 case 'd':
209 return 0x03; /* CD-ROM boot */
210 case 'n':
211 return 0x04; /* Network boot */
213 return 0;
216 /* copy/pasted from cmos_init, should be made a general function
217 and used there as well */
218 static int pc_boot_set(void *opaque, const char *boot_device)
220 Monitor *mon = cur_mon;
221 #define PC_MAX_BOOT_DEVICES 3
222 RTCState *s = (RTCState *)opaque;
223 int nbds, bds[3] = { 0, };
224 int i;
226 nbds = strlen(boot_device);
227 if (nbds > PC_MAX_BOOT_DEVICES) {
228 monitor_printf(mon, "Too many boot devices for PC\n");
229 return(1);
231 for (i = 0; i < nbds; i++) {
232 bds[i] = boot_device2nibble(boot_device[i]);
233 if (bds[i] == 0) {
234 monitor_printf(mon, "Invalid boot device for PC: '%c'\n",
235 boot_device[i]);
236 return(1);
239 rtc_set_memory(s, 0x3d, (bds[1] << 4) | bds[0]);
240 rtc_set_memory(s, 0x38, (bds[2] << 4));
241 return(0);
244 /* hd_table must contain 4 block drivers */
245 static void cmos_init(ram_addr_t ram_size, ram_addr_t above_4g_mem_size,
246 const char *boot_device, DriveInfo **hd_table)
248 RTCState *s = rtc_state;
249 int nbds, bds[3] = { 0, };
250 int val;
251 int fd0, fd1, nb;
252 int i;
254 /* various important CMOS locations needed by PC/Bochs bios */
256 /* memory size */
257 val = 640; /* base memory in K */
258 rtc_set_memory(s, 0x15, val);
259 rtc_set_memory(s, 0x16, val >> 8);
261 val = (ram_size / 1024) - 1024;
262 if (val > 65535)
263 val = 65535;
264 rtc_set_memory(s, 0x17, val);
265 rtc_set_memory(s, 0x18, val >> 8);
266 rtc_set_memory(s, 0x30, val);
267 rtc_set_memory(s, 0x31, val >> 8);
269 if (above_4g_mem_size) {
270 rtc_set_memory(s, 0x5b, (unsigned int)above_4g_mem_size >> 16);
271 rtc_set_memory(s, 0x5c, (unsigned int)above_4g_mem_size >> 24);
272 rtc_set_memory(s, 0x5d, (uint64_t)above_4g_mem_size >> 32);
275 if (ram_size > (16 * 1024 * 1024))
276 val = (ram_size / 65536) - ((16 * 1024 * 1024) / 65536);
277 else
278 val = 0;
279 if (val > 65535)
280 val = 65535;
281 rtc_set_memory(s, 0x34, val);
282 rtc_set_memory(s, 0x35, val >> 8);
284 /* set the number of CPU */
285 rtc_set_memory(s, 0x5f, smp_cpus - 1);
287 /* set boot devices, and disable floppy signature check if requested */
288 #define PC_MAX_BOOT_DEVICES 3
289 nbds = strlen(boot_device);
290 if (nbds > PC_MAX_BOOT_DEVICES) {
291 fprintf(stderr, "Too many boot devices for PC\n");
292 exit(1);
294 for (i = 0; i < nbds; i++) {
295 bds[i] = boot_device2nibble(boot_device[i]);
296 if (bds[i] == 0) {
297 fprintf(stderr, "Invalid boot device for PC: '%c'\n",
298 boot_device[i]);
299 exit(1);
302 rtc_set_memory(s, 0x3d, (bds[1] << 4) | bds[0]);
303 rtc_set_memory(s, 0x38, (bds[2] << 4) | (fd_bootchk ? 0x0 : 0x1));
305 /* floppy type */
307 fd0 = fdctrl_get_drive_type(floppy_controller, 0);
308 fd1 = fdctrl_get_drive_type(floppy_controller, 1);
310 val = (cmos_get_fd_drive_type(fd0) << 4) | cmos_get_fd_drive_type(fd1);
311 rtc_set_memory(s, 0x10, val);
313 val = 0;
314 nb = 0;
315 if (fd0 < 3)
316 nb++;
317 if (fd1 < 3)
318 nb++;
319 switch (nb) {
320 case 0:
321 break;
322 case 1:
323 val |= 0x01; /* 1 drive, ready for boot */
324 break;
325 case 2:
326 val |= 0x41; /* 2 drives, ready for boot */
327 break;
329 val |= 0x02; /* FPU is there */
330 val |= 0x04; /* PS/2 mouse installed */
331 rtc_set_memory(s, REG_EQUIPMENT_BYTE, val);
333 /* hard drives */
335 rtc_set_memory(s, 0x12, (hd_table[0] ? 0xf0 : 0) | (hd_table[1] ? 0x0f : 0));
336 if (hd_table[0])
337 cmos_init_hd(0x19, 0x1b, hd_table[0]->bdrv);
338 if (hd_table[1])
339 cmos_init_hd(0x1a, 0x24, hd_table[1]->bdrv);
341 val = 0;
342 for (i = 0; i < 4; i++) {
343 if (hd_table[i]) {
344 int cylinders, heads, sectors, translation;
345 /* NOTE: bdrv_get_geometry_hint() returns the physical
346 geometry. It is always such that: 1 <= sects <= 63, 1
347 <= heads <= 16, 1 <= cylinders <= 16383. The BIOS
348 geometry can be different if a translation is done. */
349 translation = bdrv_get_translation_hint(hd_table[i]->bdrv);
350 if (translation == BIOS_ATA_TRANSLATION_AUTO) {
351 bdrv_get_geometry_hint(hd_table[i]->bdrv, &cylinders, &heads, &sectors);
352 if (cylinders <= 1024 && heads <= 16 && sectors <= 63) {
353 /* No translation. */
354 translation = 0;
355 } else {
356 /* LBA translation. */
357 translation = 1;
359 } else {
360 translation--;
362 val |= translation << (i * 2);
365 rtc_set_memory(s, 0x39, val);
368 void ioport_set_a20(int enable)
370 /* XXX: send to all CPUs ? */
371 cpu_x86_set_a20(first_cpu, enable);
374 int ioport_get_a20(void)
376 return ((first_cpu->a20_mask >> 20) & 1);
379 static void ioport92_write(void *opaque, uint32_t addr, uint32_t val)
381 ioport_set_a20((val >> 1) & 1);
382 /* XXX: bit 0 is fast reset */
385 static uint32_t ioport92_read(void *opaque, uint32_t addr)
387 return ioport_get_a20() << 1;
390 /***********************************************************/
391 /* Bochs BIOS debug ports */
393 static void bochs_bios_write(void *opaque, uint32_t addr, uint32_t val)
395 static const char shutdown_str[8] = "Shutdown";
396 static int shutdown_index = 0;
398 switch(addr) {
399 /* Bochs BIOS messages */
400 case 0x400:
401 case 0x401:
402 fprintf(stderr, "BIOS panic at rombios.c, line %d\n", val);
403 exit(1);
404 case 0x402:
405 case 0x403:
406 #ifdef DEBUG_BIOS
407 fprintf(stderr, "%c", val);
408 #endif
409 break;
410 case 0x8900:
411 /* same as Bochs power off */
412 if (val == shutdown_str[shutdown_index]) {
413 shutdown_index++;
414 if (shutdown_index == 8) {
415 shutdown_index = 0;
416 qemu_system_shutdown_request();
418 } else {
419 shutdown_index = 0;
421 break;
423 /* LGPL'ed VGA BIOS messages */
424 case 0x501:
425 case 0x502:
426 fprintf(stderr, "VGA BIOS panic, line %d\n", val);
427 exit(1);
428 case 0x500:
429 case 0x503:
430 #ifdef DEBUG_BIOS
431 fprintf(stderr, "%c", val);
432 #endif
433 break;
437 static void *bochs_bios_init(void)
439 void *fw_cfg;
440 uint8_t *smbios_table;
441 size_t smbios_len;
442 uint64_t *numa_fw_cfg;
443 int i, j;
445 register_ioport_write(0x400, 1, 2, bochs_bios_write, NULL);
446 register_ioport_write(0x401, 1, 2, bochs_bios_write, NULL);
447 register_ioport_write(0x402, 1, 1, bochs_bios_write, NULL);
448 register_ioport_write(0x403, 1, 1, bochs_bios_write, NULL);
449 register_ioport_write(0x8900, 1, 1, bochs_bios_write, NULL);
451 register_ioport_write(0x501, 1, 2, bochs_bios_write, NULL);
452 register_ioport_write(0x502, 1, 2, bochs_bios_write, NULL);
453 register_ioport_write(0x500, 1, 1, bochs_bios_write, NULL);
454 register_ioport_write(0x503, 1, 1, bochs_bios_write, NULL);
456 fw_cfg = fw_cfg_init(BIOS_CFG_IOPORT, BIOS_CFG_IOPORT + 1, 0, 0);
458 fw_cfg_add_i32(fw_cfg, FW_CFG_ID, 1);
459 fw_cfg_add_i64(fw_cfg, FW_CFG_RAM_SIZE, (uint64_t)ram_size);
460 fw_cfg_add_bytes(fw_cfg, FW_CFG_ACPI_TABLES, (uint8_t *)acpi_tables,
461 acpi_tables_len);
462 fw_cfg_add_bytes(fw_cfg, FW_CFG_IRQ0_OVERRIDE, &irq0override, 1);
464 smbios_table = smbios_get_table(&smbios_len);
465 if (smbios_table)
466 fw_cfg_add_bytes(fw_cfg, FW_CFG_SMBIOS_ENTRIES,
467 smbios_table, smbios_len);
469 /* allocate memory for the NUMA channel: one (64bit) word for the number
470 * of nodes, one word for each VCPU->node and one word for each node to
471 * hold the amount of memory.
473 numa_fw_cfg = qemu_mallocz((1 + smp_cpus + nb_numa_nodes) * 8);
474 numa_fw_cfg[0] = cpu_to_le64(nb_numa_nodes);
475 for (i = 0; i < smp_cpus; i++) {
476 for (j = 0; j < nb_numa_nodes; j++) {
477 if (node_cpumask[j] & (1 << i)) {
478 numa_fw_cfg[i + 1] = cpu_to_le64(j);
479 break;
483 for (i = 0; i < nb_numa_nodes; i++) {
484 numa_fw_cfg[smp_cpus + 1 + i] = cpu_to_le64(node_mem[i]);
486 fw_cfg_add_bytes(fw_cfg, FW_CFG_NUMA, (uint8_t *)numa_fw_cfg,
487 (1 + smp_cpus + nb_numa_nodes) * 8);
489 return fw_cfg;
492 /* Generate an initial boot sector which sets state and jump to
493 a specified vector */
494 static void generate_bootsect(uint32_t gpr[8], uint16_t segs[6], uint16_t ip)
496 uint8_t rom[512], *p, *reloc;
497 uint8_t sum;
498 int i;
500 memset(rom, 0, sizeof(rom));
502 p = rom;
503 /* Make sure we have an option rom signature */
504 *p++ = 0x55;
505 *p++ = 0xaa;
507 /* ROM size in sectors*/
508 *p++ = 1;
510 /* Hook int19 */
512 *p++ = 0x50; /* push ax */
513 *p++ = 0x1e; /* push ds */
514 *p++ = 0x31; *p++ = 0xc0; /* xor ax, ax */
515 *p++ = 0x8e; *p++ = 0xd8; /* mov ax, ds */
517 *p++ = 0xc7; *p++ = 0x06; /* movvw _start,0x64 */
518 *p++ = 0x64; *p++ = 0x00;
519 reloc = p;
520 *p++ = 0x00; *p++ = 0x00;
522 *p++ = 0x8c; *p++ = 0x0e; /* mov cs,0x66 */
523 *p++ = 0x66; *p++ = 0x00;
525 *p++ = 0x1f; /* pop ds */
526 *p++ = 0x58; /* pop ax */
527 *p++ = 0xcb; /* lret */
529 /* Actual code */
530 *reloc = (p - rom);
532 *p++ = 0xfa; /* CLI */
533 *p++ = 0xfc; /* CLD */
535 for (i = 0; i < 6; i++) {
536 if (i == 1) /* Skip CS */
537 continue;
539 *p++ = 0xb8; /* MOV AX,imm16 */
540 *p++ = segs[i];
541 *p++ = segs[i] >> 8;
542 *p++ = 0x8e; /* MOV <seg>,AX */
543 *p++ = 0xc0 + (i << 3);
546 for (i = 0; i < 8; i++) {
547 *p++ = 0x66; /* 32-bit operand size */
548 *p++ = 0xb8 + i; /* MOV <reg>,imm32 */
549 *p++ = gpr[i];
550 *p++ = gpr[i] >> 8;
551 *p++ = gpr[i] >> 16;
552 *p++ = gpr[i] >> 24;
555 *p++ = 0xea; /* JMP FAR */
556 *p++ = ip; /* IP */
557 *p++ = ip >> 8;
558 *p++ = segs[1]; /* CS */
559 *p++ = segs[1] >> 8;
561 /* sign rom */
562 sum = 0;
563 for (i = 0; i < (sizeof(rom) - 1); i++)
564 sum += rom[i];
565 rom[sizeof(rom) - 1] = -sum;
567 rom_add_blob("linux-bootsect", rom, sizeof(rom),
568 PC_ROM_MIN_OPTION, PC_ROM_MAX, PC_ROM_ALIGN);
571 static long get_file_size(FILE *f)
573 long where, size;
575 /* XXX: on Unix systems, using fstat() probably makes more sense */
577 where = ftell(f);
578 fseek(f, 0, SEEK_END);
579 size = ftell(f);
580 fseek(f, where, SEEK_SET);
582 return size;
585 #define MULTIBOOT_STRUCT_ADDR 0x9000
587 #if MULTIBOOT_STRUCT_ADDR > 0xf0000
588 #error multiboot struct needs to fit in 16 bit real mode
589 #endif
591 static int load_multiboot(void *fw_cfg,
592 FILE *f,
593 const char *kernel_filename,
594 const char *initrd_filename,
595 const char *kernel_cmdline,
596 uint8_t *header)
598 int i, is_multiboot = 0;
599 uint32_t flags = 0;
600 uint32_t mh_entry_addr;
601 uint32_t mh_load_addr;
602 uint32_t mb_kernel_size;
603 uint32_t mmap_addr = MULTIBOOT_STRUCT_ADDR;
604 uint32_t mb_bootinfo = MULTIBOOT_STRUCT_ADDR + 0x500;
605 uint32_t mb_mod_end;
606 uint8_t bootinfo[0x500];
607 uint32_t cmdline = 0x200;
609 /* Ok, let's see if it is a multiboot image.
610 The header is 12x32bit long, so the latest entry may be 8192 - 48. */
611 for (i = 0; i < (8192 - 48); i += 4) {
612 if (ldl_p(header+i) == 0x1BADB002) {
613 uint32_t checksum = ldl_p(header+i+8);
614 flags = ldl_p(header+i+4);
615 checksum += flags;
616 checksum += (uint32_t)0x1BADB002;
617 if (!checksum) {
618 is_multiboot = 1;
619 break;
624 if (!is_multiboot)
625 return 0; /* no multiboot */
627 #ifdef DEBUG_MULTIBOOT
628 fprintf(stderr, "qemu: I believe we found a multiboot image!\n");
629 #endif
630 memset(bootinfo, 0, sizeof(bootinfo));
632 if (flags & 0x00000004) { /* MULTIBOOT_HEADER_HAS_VBE */
633 fprintf(stderr, "qemu: multiboot knows VBE. we don't.\n");
635 if (!(flags & 0x00010000)) { /* MULTIBOOT_HEADER_HAS_ADDR */
636 uint64_t elf_entry;
637 int kernel_size;
638 fclose(f);
639 kernel_size = load_elf(kernel_filename, 0, &elf_entry, NULL, NULL,
640 0, ELF_MACHINE, 0);
641 if (kernel_size < 0) {
642 fprintf(stderr, "Error while loading elf kernel\n");
643 exit(1);
645 mh_load_addr = mh_entry_addr = elf_entry;
646 mb_kernel_size = kernel_size;
648 #ifdef DEBUG_MULTIBOOT
649 fprintf(stderr, "qemu: loading multiboot-elf kernel (%#x bytes) with entry %#zx\n",
650 mb_kernel_size, (size_t)mh_entry_addr);
651 #endif
652 } else {
653 /* Valid if mh_flags sets MULTIBOOT_HEADER_HAS_ADDR. */
654 uint32_t mh_header_addr = ldl_p(header+i+12);
655 mh_load_addr = ldl_p(header+i+16);
656 #ifdef DEBUG_MULTIBOOT
657 uint32_t mh_load_end_addr = ldl_p(header+i+20);
658 uint32_t mh_bss_end_addr = ldl_p(header+i+24);
659 #endif
660 uint32_t mb_kernel_text_offset = i - (mh_header_addr - mh_load_addr);
661 uint8_t *kernel;
663 mh_entry_addr = ldl_p(header+i+28);
664 mb_kernel_size = get_file_size(f) - mb_kernel_text_offset;
666 /* Valid if mh_flags sets MULTIBOOT_HEADER_HAS_VBE.
667 uint32_t mh_mode_type = ldl_p(header+i+32);
668 uint32_t mh_width = ldl_p(header+i+36);
669 uint32_t mh_height = ldl_p(header+i+40);
670 uint32_t mh_depth = ldl_p(header+i+44); */
672 #ifdef DEBUG_MULTIBOOT
673 fprintf(stderr, "multiboot: mh_header_addr = %#x\n", mh_header_addr);
674 fprintf(stderr, "multiboot: mh_load_addr = %#x\n", mh_load_addr);
675 fprintf(stderr, "multiboot: mh_load_end_addr = %#x\n", mh_load_end_addr);
676 fprintf(stderr, "multiboot: mh_bss_end_addr = %#x\n", mh_bss_end_addr);
677 fprintf(stderr, "qemu: loading multiboot kernel (%#x bytes) at %#x\n",
678 mb_kernel_size, mh_load_addr);
679 #endif
681 kernel = qemu_malloc(mb_kernel_size);
682 fseek(f, mb_kernel_text_offset, SEEK_SET);
683 fread(kernel, 1, mb_kernel_size, f);
684 rom_add_blob_fixed(kernel_filename, kernel, mb_kernel_size,
685 mh_load_addr);
686 qemu_free(kernel);
687 fclose(f);
690 /* blob size is only the kernel for now */
691 mb_mod_end = mh_load_addr + mb_kernel_size;
693 /* load modules */
694 stl_p(bootinfo + 20, 0x0); /* mods_count */
695 if (initrd_filename) {
696 uint32_t mb_mod_info = 0x100;
697 uint32_t mb_mod_cmdline = 0x300;
698 uint32_t mb_mod_start = mh_load_addr;
699 uint32_t mb_mod_length = mb_kernel_size;
700 char *next_initrd;
701 char *next_space;
702 int mb_mod_count = 0;
704 do {
705 if (mb_mod_info + 16 > mb_mod_cmdline) {
706 printf("WARNING: Too many modules loaded, aborting.\n");
707 break;
709 next_initrd = strchr(initrd_filename, ',');
710 if (next_initrd)
711 *next_initrd = '\0';
712 /* if a space comes after the module filename, treat everything
713 after that as parameters */
714 pstrcpy((char*)bootinfo + mb_mod_cmdline,
715 sizeof(bootinfo) - mb_mod_cmdline,
716 initrd_filename);
717 stl_p(bootinfo + mb_mod_info + 8, mb_bootinfo + mb_mod_cmdline); /* string */
718 mb_mod_cmdline += strlen(initrd_filename) + 1;
719 if (mb_mod_cmdline > sizeof(bootinfo)) {
720 mb_mod_cmdline = sizeof(bootinfo);
721 printf("WARNING: Too many module cmdlines loaded, aborting.\n");
722 break;
724 if ((next_space = strchr(initrd_filename, ' ')))
725 *next_space = '\0';
726 #ifdef DEBUG_MULTIBOOT
727 printf("multiboot loading module: %s\n", initrd_filename);
728 #endif
729 mb_mod_start = (mb_mod_start + mb_mod_length + (TARGET_PAGE_SIZE - 1))
730 & (TARGET_PAGE_MASK);
731 mb_mod_length = get_image_size(initrd_filename);
732 if (mb_mod_length < 0) {
733 fprintf(stderr, "failed to get %s image size\n", initrd_filename);
734 exit(1);
736 mb_mod_end = mb_mod_start + mb_mod_length;
737 rom_add_file_fixed(initrd_filename, mb_mod_start);
739 mb_mod_count++;
740 stl_p(bootinfo + mb_mod_info + 0, mb_mod_start);
741 stl_p(bootinfo + mb_mod_info + 4, mb_mod_start + mb_mod_length);
742 stl_p(bootinfo + mb_mod_info + 12, 0x0); /* reserved */
743 #ifdef DEBUG_MULTIBOOT
744 printf("mod_start: %#x\nmod_end: %#x\n", mb_mod_start,
745 mb_mod_start + mb_mod_length);
746 #endif
747 initrd_filename = next_initrd+1;
748 mb_mod_info += 16;
749 } while (next_initrd);
750 stl_p(bootinfo + 20, mb_mod_count); /* mods_count */
751 stl_p(bootinfo + 24, mb_bootinfo + 0x100); /* mods_addr */
754 /* Commandline support */
755 stl_p(bootinfo + 16, mb_bootinfo + cmdline);
756 snprintf((char*)bootinfo + cmdline, 0x100, "%s %s",
757 kernel_filename, kernel_cmdline);
759 /* the kernel is where we want it to be now */
760 #define MULTIBOOT_FLAGS_MEMORY (1 << 0)
761 #define MULTIBOOT_FLAGS_BOOT_DEVICE (1 << 1)
762 #define MULTIBOOT_FLAGS_CMDLINE (1 << 2)
763 #define MULTIBOOT_FLAGS_MODULES (1 << 3)
764 #define MULTIBOOT_FLAGS_MMAP (1 << 6)
765 stl_p(bootinfo, MULTIBOOT_FLAGS_MEMORY
766 | MULTIBOOT_FLAGS_BOOT_DEVICE
767 | MULTIBOOT_FLAGS_CMDLINE
768 | MULTIBOOT_FLAGS_MODULES
769 | MULTIBOOT_FLAGS_MMAP);
770 stl_p(bootinfo + 4, 640); /* mem_lower */
771 stl_p(bootinfo + 8, ram_size / 1024); /* mem_upper */
772 stl_p(bootinfo + 12, 0x8001ffff); /* XXX: use the -boot switch? */
773 stl_p(bootinfo + 48, mmap_addr); /* mmap_addr */
775 #ifdef DEBUG_MULTIBOOT
776 fprintf(stderr, "multiboot: mh_entry_addr = %#x\n", mh_entry_addr);
777 #endif
779 /* Pass variables to option rom */
780 fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_ADDR, mh_entry_addr);
781 fw_cfg_add_i32(fw_cfg, FW_CFG_INITRD_ADDR, mb_bootinfo);
782 fw_cfg_add_i32(fw_cfg, FW_CFG_INITRD_SIZE, mmap_addr);
784 rom_add_blob_fixed("multiboot-info", bootinfo, sizeof(bootinfo),
785 mb_bootinfo);
787 option_rom[nb_option_roms] = "multiboot.bin";
788 nb_option_roms++;
790 return 1; /* yes, we are multiboot */
793 static void load_linux(void *fw_cfg,
794 const char *kernel_filename,
795 const char *initrd_filename,
796 const char *kernel_cmdline,
797 target_phys_addr_t max_ram_size)
799 uint16_t protocol;
800 uint32_t gpr[8];
801 uint16_t seg[6];
802 uint16_t real_seg;
803 int setup_size, kernel_size, initrd_size = 0, cmdline_size;
804 uint32_t initrd_max;
805 uint8_t header[8192], *setup, *kernel;
806 target_phys_addr_t real_addr, prot_addr, cmdline_addr, initrd_addr = 0;
807 FILE *f;
808 char *vmode;
810 /* Align to 16 bytes as a paranoia measure */
811 cmdline_size = (strlen(kernel_cmdline)+16) & ~15;
813 /* load the kernel header */
814 f = fopen(kernel_filename, "rb");
815 if (!f || !(kernel_size = get_file_size(f)) ||
816 fread(header, 1, MIN(ARRAY_SIZE(header), kernel_size), f) !=
817 MIN(ARRAY_SIZE(header), kernel_size)) {
818 fprintf(stderr, "qemu: could not load kernel '%s': %s\n",
819 kernel_filename, strerror(errno));
820 exit(1);
823 /* kernel protocol version */
824 #if 0
825 fprintf(stderr, "header magic: %#x\n", ldl_p(header+0x202));
826 #endif
827 if (ldl_p(header+0x202) == 0x53726448)
828 protocol = lduw_p(header+0x206);
829 else {
830 /* This looks like a multiboot kernel. If it is, let's stop
831 treating it like a Linux kernel. */
832 if (load_multiboot(fw_cfg, f, kernel_filename,
833 initrd_filename, kernel_cmdline, header))
834 return;
835 protocol = 0;
838 if (protocol < 0x200 || !(header[0x211] & 0x01)) {
839 /* Low kernel */
840 real_addr = 0x90000;
841 cmdline_addr = 0x9a000 - cmdline_size;
842 prot_addr = 0x10000;
843 } else if (protocol < 0x202) {
844 /* High but ancient kernel */
845 real_addr = 0x90000;
846 cmdline_addr = 0x9a000 - cmdline_size;
847 prot_addr = 0x100000;
848 } else {
849 /* High and recent kernel */
850 real_addr = 0x10000;
851 cmdline_addr = 0x20000;
852 prot_addr = 0x100000;
855 #if 0
856 fprintf(stderr,
857 "qemu: real_addr = 0x" TARGET_FMT_plx "\n"
858 "qemu: cmdline_addr = 0x" TARGET_FMT_plx "\n"
859 "qemu: prot_addr = 0x" TARGET_FMT_plx "\n",
860 real_addr,
861 cmdline_addr,
862 prot_addr);
863 #endif
865 /* highest address for loading the initrd */
866 if (protocol >= 0x203)
867 initrd_max = ldl_p(header+0x22c);
868 else
869 initrd_max = 0x37ffffff;
871 if (initrd_max >= max_ram_size-ACPI_DATA_SIZE)
872 initrd_max = max_ram_size-ACPI_DATA_SIZE-1;
874 /* kernel command line */
875 rom_add_blob_fixed("cmdline", kernel_cmdline,
876 strlen(kernel_cmdline)+1, cmdline_addr);
878 if (protocol >= 0x202) {
879 stl_p(header+0x228, cmdline_addr);
880 } else {
881 stw_p(header+0x20, 0xA33F);
882 stw_p(header+0x22, cmdline_addr-real_addr);
885 /* handle vga= parameter */
886 vmode = strstr(kernel_cmdline, "vga=");
887 if (vmode) {
888 unsigned int video_mode;
889 /* skip "vga=" */
890 vmode += 4;
891 if (!strncmp(vmode, "normal", 6)) {
892 video_mode = 0xffff;
893 } else if (!strncmp(vmode, "ext", 3)) {
894 video_mode = 0xfffe;
895 } else if (!strncmp(vmode, "ask", 3)) {
896 video_mode = 0xfffd;
897 } else {
898 video_mode = strtol(vmode, NULL, 0);
900 stw_p(header+0x1fa, video_mode);
903 /* loader type */
904 /* High nybble = B reserved for Qemu; low nybble is revision number.
905 If this code is substantially changed, you may want to consider
906 incrementing the revision. */
907 if (protocol >= 0x200)
908 header[0x210] = 0xB0;
910 /* heap */
911 if (protocol >= 0x201) {
912 header[0x211] |= 0x80; /* CAN_USE_HEAP */
913 stw_p(header+0x224, cmdline_addr-real_addr-0x200);
916 /* load initrd */
917 if (initrd_filename) {
918 if (protocol < 0x200) {
919 fprintf(stderr, "qemu: linux kernel too old to load a ram disk\n");
920 exit(1);
923 initrd_size = get_image_size(initrd_filename);
924 initrd_addr = (initrd_max-initrd_size) & ~4095;
925 rom_add_file_fixed(initrd_filename, initrd_addr);
927 stl_p(header+0x218, initrd_addr);
928 stl_p(header+0x21c, initrd_size);
931 /* load kernel and setup */
932 setup_size = header[0x1f1];
933 if (setup_size == 0)
934 setup_size = 4;
935 setup_size = (setup_size+1)*512;
936 kernel_size -= setup_size;
938 setup = qemu_malloc(setup_size);
939 kernel = qemu_malloc(kernel_size);
940 fseek(f, 0, SEEK_SET);
941 fread(setup, 1, setup_size, f);
942 fread(kernel, 1, kernel_size, f);
943 fclose(f);
944 memcpy(setup, header, MIN(sizeof(header), setup_size));
945 rom_add_blob_fixed("linux-setup", setup,
946 setup_size, real_addr);
947 rom_add_blob_fixed(kernel_filename, kernel,
948 kernel_size, prot_addr);
949 qemu_free(setup);
950 qemu_free(kernel);
952 /* generate bootsector to set up the initial register state */
953 real_seg = real_addr >> 4;
954 seg[0] = seg[2] = seg[3] = seg[4] = seg[4] = real_seg;
955 seg[1] = real_seg+0x20; /* CS */
956 memset(gpr, 0, sizeof gpr);
957 gpr[4] = cmdline_addr-real_addr-16; /* SP (-16 is paranoia) */
959 generate_bootsect(gpr, seg, 0);
962 static const int ide_iobase[2] = { 0x1f0, 0x170 };
963 static const int ide_iobase2[2] = { 0x3f6, 0x376 };
964 static const int ide_irq[2] = { 14, 15 };
966 #define NE2000_NB_MAX 6
968 static const int ne2000_io[NE2000_NB_MAX] = { 0x300, 0x320, 0x340, 0x360,
969 0x280, 0x380 };
970 static const int ne2000_irq[NE2000_NB_MAX] = { 9, 10, 11, 3, 4, 5 };
972 static const int parallel_io[MAX_PARALLEL_PORTS] = { 0x378, 0x278, 0x3bc };
973 static const int parallel_irq[MAX_PARALLEL_PORTS] = { 7, 7, 7 };
975 #ifdef HAS_AUDIO
976 static void audio_init (PCIBus *pci_bus, qemu_irq *pic)
978 struct soundhw *c;
980 for (c = soundhw; c->name; ++c) {
981 if (c->enabled) {
982 if (c->isa) {
983 c->init.init_isa(pic);
984 } else {
985 if (pci_bus) {
986 c->init.init_pci(pci_bus);
992 #endif
994 static void pc_init_ne2k_isa(NICInfo *nd)
996 static int nb_ne2k = 0;
998 if (nb_ne2k == NE2000_NB_MAX)
999 return;
1000 isa_ne2000_init(ne2000_io[nb_ne2k],
1001 ne2000_irq[nb_ne2k], nd);
1002 nb_ne2k++;
1005 int cpu_is_bsp(CPUState *env)
1007 return env->cpuid_apic_id == 0;
1010 static CPUState *pc_new_cpu(const char *cpu_model)
1012 CPUState *env;
1014 env = cpu_init(cpu_model);
1015 if (!env) {
1016 fprintf(stderr, "Unable to find x86 CPU definition\n");
1017 exit(1);
1019 if ((env->cpuid_features & CPUID_APIC) || smp_cpus > 1) {
1020 env->cpuid_apic_id = env->cpu_index;
1021 /* APIC reset callback resets cpu */
1022 apic_init(env);
1023 } else {
1024 qemu_register_reset((QEMUResetHandler*)cpu_reset, env);
1026 return env;
1029 /* PC hardware initialisation */
1030 static void pc_init1(ram_addr_t ram_size,
1031 const char *boot_device,
1032 const char *kernel_filename,
1033 const char *kernel_cmdline,
1034 const char *initrd_filename,
1035 const char *cpu_model,
1036 int pci_enabled)
1038 char *filename;
1039 int ret, linux_boot, i;
1040 ram_addr_t ram_addr, bios_offset, option_rom_offset;
1041 ram_addr_t below_4g_mem_size, above_4g_mem_size = 0;
1042 int bios_size, isa_bios_size;
1043 PCIBus *pci_bus;
1044 ISADevice *isa_dev;
1045 int piix3_devfn = -1;
1046 CPUState *env;
1047 qemu_irq *cpu_irq;
1048 qemu_irq *isa_irq;
1049 qemu_irq *i8259;
1050 IsaIrqState *isa_irq_state;
1051 DriveInfo *hd[MAX_IDE_BUS * MAX_IDE_DEVS];
1052 DriveInfo *fd[MAX_FD];
1053 int using_vga = cirrus_vga_enabled || std_vga_enabled || vmsvga_enabled;
1054 void *fw_cfg;
1056 if (ram_size >= 0xe0000000 ) {
1057 above_4g_mem_size = ram_size - 0xe0000000;
1058 below_4g_mem_size = 0xe0000000;
1059 } else {
1060 below_4g_mem_size = ram_size;
1063 linux_boot = (kernel_filename != NULL);
1065 /* init CPUs */
1066 if (cpu_model == NULL) {
1067 #ifdef TARGET_X86_64
1068 cpu_model = "qemu64";
1069 #else
1070 cpu_model = "qemu32";
1071 #endif
1074 for (i = 0; i < smp_cpus; i++) {
1075 env = pc_new_cpu(cpu_model);
1078 vmport_init();
1080 /* allocate RAM */
1081 ram_addr = qemu_ram_alloc(0xa0000);
1082 cpu_register_physical_memory(0, 0xa0000, ram_addr);
1084 /* Allocate, even though we won't register, so we don't break the
1085 * phys_ram_base + PA assumption. This range includes vga (0xa0000 - 0xc0000),
1086 * and some bios areas, which will be registered later
1088 ram_addr = qemu_ram_alloc(0x100000 - 0xa0000);
1089 ram_addr = qemu_ram_alloc(below_4g_mem_size - 0x100000);
1090 cpu_register_physical_memory(0x100000,
1091 below_4g_mem_size - 0x100000,
1092 ram_addr);
1094 /* above 4giga memory allocation */
1095 if (above_4g_mem_size > 0) {
1096 #if TARGET_PHYS_ADDR_BITS == 32
1097 hw_error("To much RAM for 32-bit physical address");
1098 #else
1099 ram_addr = qemu_ram_alloc(above_4g_mem_size);
1100 cpu_register_physical_memory(0x100000000ULL,
1101 above_4g_mem_size,
1102 ram_addr);
1103 #endif
1107 /* BIOS load */
1108 if (bios_name == NULL)
1109 bios_name = BIOS_FILENAME;
1110 filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
1111 if (filename) {
1112 bios_size = get_image_size(filename);
1113 } else {
1114 bios_size = -1;
1116 if (bios_size <= 0 ||
1117 (bios_size % 65536) != 0) {
1118 goto bios_error;
1120 bios_offset = qemu_ram_alloc(bios_size);
1121 ret = load_image(filename, qemu_get_ram_ptr(bios_offset));
1122 if (ret != bios_size) {
1123 bios_error:
1124 fprintf(stderr, "qemu: could not load PC BIOS '%s'\n", bios_name);
1125 exit(1);
1127 if (filename) {
1128 qemu_free(filename);
1130 /* map the last 128KB of the BIOS in ISA space */
1131 isa_bios_size = bios_size;
1132 if (isa_bios_size > (128 * 1024))
1133 isa_bios_size = 128 * 1024;
1134 cpu_register_physical_memory(0x100000 - isa_bios_size,
1135 isa_bios_size,
1136 (bios_offset + bios_size - isa_bios_size) | IO_MEM_ROM);
1140 option_rom_offset = qemu_ram_alloc(PC_ROM_SIZE);
1141 cpu_register_physical_memory(PC_ROM_MIN_VGA, PC_ROM_SIZE, option_rom_offset);
1143 if (using_vga) {
1144 /* VGA BIOS load */
1145 if (cirrus_vga_enabled) {
1146 rom_add_vga(VGABIOS_CIRRUS_FILENAME);
1147 } else {
1148 rom_add_vga(VGABIOS_FILENAME);
1152 /* map all the bios at the top of memory */
1153 cpu_register_physical_memory((uint32_t)(-bios_size),
1154 bios_size, bios_offset | IO_MEM_ROM);
1156 fw_cfg = bochs_bios_init();
1158 if (linux_boot) {
1159 load_linux(fw_cfg, kernel_filename, initrd_filename, kernel_cmdline, below_4g_mem_size);
1162 for (i = 0; i < nb_option_roms; i++) {
1163 rom_add_option(option_rom[i]);
1166 for (i = 0; i < nb_nics; i++) {
1167 char nic_oprom[1024];
1168 const char *model = nd_table[i].model;
1170 if (!nd_table[i].bootable)
1171 continue;
1173 if (model == NULL)
1174 model = "e1000";
1175 snprintf(nic_oprom, sizeof(nic_oprom), "pxe-%s.bin", model);
1177 rom_add_option(nic_oprom);
1180 cpu_irq = qemu_allocate_irqs(pic_irq_request, NULL, 1);
1181 i8259 = i8259_init(cpu_irq[0]);
1182 isa_irq_state = qemu_mallocz(sizeof(*isa_irq_state));
1183 isa_irq_state->i8259 = i8259;
1184 isa_irq = qemu_allocate_irqs(isa_irq_handler, isa_irq_state, 24);
1186 if (pci_enabled) {
1187 pci_bus = i440fx_init(&i440fx_state, &piix3_devfn, isa_irq);
1188 } else {
1189 pci_bus = NULL;
1190 isa_bus_new(NULL);
1192 isa_bus_irqs(isa_irq);
1194 ferr_irq = isa_reserve_irq(13);
1196 /* init basic PC hardware */
1197 register_ioport_write(0x80, 1, 1, ioport80_write, NULL);
1199 register_ioport_write(0xf0, 1, 1, ioportF0_write, NULL);
1201 if (cirrus_vga_enabled) {
1202 if (pci_enabled) {
1203 pci_cirrus_vga_init(pci_bus);
1204 } else {
1205 isa_cirrus_vga_init();
1207 } else if (vmsvga_enabled) {
1208 if (pci_enabled)
1209 pci_vmsvga_init(pci_bus);
1210 else
1211 fprintf(stderr, "%s: vmware_vga: no PCI bus\n", __FUNCTION__);
1212 } else if (std_vga_enabled) {
1213 if (pci_enabled) {
1214 pci_vga_init(pci_bus, 0, 0);
1215 } else {
1216 isa_vga_init();
1220 rtc_state = rtc_init(2000);
1222 qemu_register_boot_set(pc_boot_set, rtc_state);
1224 register_ioport_read(0x92, 1, 1, ioport92_read, NULL);
1225 register_ioport_write(0x92, 1, 1, ioport92_write, NULL);
1227 if (pci_enabled) {
1228 isa_irq_state->ioapic = ioapic_init();
1230 pit = pit_init(0x40, isa_reserve_irq(0));
1231 pcspk_init(pit);
1232 if (!no_hpet) {
1233 hpet_init(isa_irq);
1236 for(i = 0; i < MAX_SERIAL_PORTS; i++) {
1237 if (serial_hds[i]) {
1238 serial_isa_init(i, serial_hds[i]);
1242 for(i = 0; i < MAX_PARALLEL_PORTS; i++) {
1243 if (parallel_hds[i]) {
1244 parallel_init(i, parallel_hds[i]);
1248 for(i = 0; i < nb_nics; i++) {
1249 NICInfo *nd = &nd_table[i];
1251 if (!pci_enabled || (nd->model && strcmp(nd->model, "ne2k_isa") == 0))
1252 pc_init_ne2k_isa(nd);
1253 else
1254 pci_nic_init_nofail(nd, "e1000", NULL);
1257 if (drive_get_max_bus(IF_IDE) >= MAX_IDE_BUS) {
1258 fprintf(stderr, "qemu: too many IDE bus\n");
1259 exit(1);
1262 for(i = 0; i < MAX_IDE_BUS * MAX_IDE_DEVS; i++) {
1263 hd[i] = drive_get(IF_IDE, i / MAX_IDE_DEVS, i % MAX_IDE_DEVS);
1266 if (pci_enabled) {
1267 pci_piix3_ide_init(pci_bus, hd, piix3_devfn + 1);
1268 } else {
1269 for(i = 0; i < MAX_IDE_BUS; i++) {
1270 isa_ide_init(ide_iobase[i], ide_iobase2[i], ide_irq[i],
1271 hd[MAX_IDE_DEVS * i], hd[MAX_IDE_DEVS * i + 1]);
1275 isa_dev = isa_create_simple("i8042");
1276 DMA_init(0);
1277 #ifdef HAS_AUDIO
1278 audio_init(pci_enabled ? pci_bus : NULL, isa_irq);
1279 #endif
1281 for(i = 0; i < MAX_FD; i++) {
1282 fd[i] = drive_get(IF_FLOPPY, 0, i);
1284 floppy_controller = fdctrl_init_isa(fd);
1286 cmos_init(below_4g_mem_size, above_4g_mem_size, boot_device, hd);
1288 if (pci_enabled && usb_enabled) {
1289 usb_uhci_piix3_init(pci_bus, piix3_devfn + 2);
1292 if (pci_enabled && acpi_enabled) {
1293 uint8_t *eeprom_buf = qemu_mallocz(8 * 256); /* XXX: make this persistent */
1294 i2c_bus *smbus;
1296 /* TODO: Populate SPD eeprom data. */
1297 smbus = piix4_pm_init(pci_bus, piix3_devfn + 3, 0xb100,
1298 isa_reserve_irq(9));
1299 for (i = 0; i < 8; i++) {
1300 DeviceState *eeprom;
1301 eeprom = qdev_create((BusState *)smbus, "smbus-eeprom");
1302 qdev_prop_set_uint8(eeprom, "address", 0x50 + i);
1303 qdev_prop_set_ptr(eeprom, "data", eeprom_buf + (i * 256));
1304 qdev_init_nofail(eeprom);
1306 piix4_acpi_system_hot_add_init(pci_bus);
1309 if (i440fx_state) {
1310 i440fx_init_memory_mappings(i440fx_state);
1313 if (pci_enabled) {
1314 int max_bus;
1315 int bus;
1317 max_bus = drive_get_max_bus(IF_SCSI);
1318 for (bus = 0; bus <= max_bus; bus++) {
1319 pci_create_simple(pci_bus, -1, "lsi53c895a");
1323 /* Add virtio console devices */
1324 if (pci_enabled) {
1325 for(i = 0; i < MAX_VIRTIO_CONSOLES; i++) {
1326 if (virtcon_hds[i]) {
1327 pci_create_simple(pci_bus, -1, "virtio-console-pci");
1333 static void pc_init_pci(ram_addr_t ram_size,
1334 const char *boot_device,
1335 const char *kernel_filename,
1336 const char *kernel_cmdline,
1337 const char *initrd_filename,
1338 const char *cpu_model)
1340 pc_init1(ram_size, boot_device,
1341 kernel_filename, kernel_cmdline,
1342 initrd_filename, cpu_model, 1);
1345 static void pc_init_isa(ram_addr_t ram_size,
1346 const char *boot_device,
1347 const char *kernel_filename,
1348 const char *kernel_cmdline,
1349 const char *initrd_filename,
1350 const char *cpu_model)
1352 if (cpu_model == NULL)
1353 cpu_model = "486";
1354 pc_init1(ram_size, boot_device,
1355 kernel_filename, kernel_cmdline,
1356 initrd_filename, cpu_model, 0);
1359 /* set CMOS shutdown status register (index 0xF) as S3_resume(0xFE)
1360 BIOS will read it and start S3 resume at POST Entry */
1361 void cmos_set_s3_resume(void)
1363 if (rtc_state)
1364 rtc_set_memory(rtc_state, 0xF, 0xFE);
1367 static QEMUMachine pc_machine = {
1368 .name = "pc-0.11",
1369 .alias = "pc",
1370 .desc = "Standard PC",
1371 .init = pc_init_pci,
1372 .max_cpus = 255,
1373 .is_default = 1,
1376 static QEMUMachine pc_machine_v0_10 = {
1377 .name = "pc-0.10",
1378 .desc = "Standard PC, qemu 0.10",
1379 .init = pc_init_pci,
1380 .max_cpus = 255,
1381 .compat_props = (CompatProperty[]) {
1383 .driver = "virtio-blk-pci",
1384 .property = "class",
1385 .value = stringify(PCI_CLASS_STORAGE_OTHER),
1387 .driver = "virtio-console-pci",
1388 .property = "class",
1389 .value = stringify(PCI_CLASS_DISPLAY_OTHER),
1391 .driver = "virtio-net-pci",
1392 .property = "vectors",
1393 .value = stringify(0),
1395 .driver = "virtio-blk-pci",
1396 .property = "vectors",
1397 .value = stringify(0),
1399 { /* end of list */ }
1403 static QEMUMachine isapc_machine = {
1404 .name = "isapc",
1405 .desc = "ISA-only PC",
1406 .init = pc_init_isa,
1407 .max_cpus = 1,
1410 static void pc_machine_init(void)
1412 qemu_register_machine(&pc_machine);
1413 qemu_register_machine(&pc_machine_v0_10);
1414 qemu_register_machine(&isapc_machine);
1417 machine_init(pc_machine_init);