hw/slavio_misc.c

   1 /*
   2  * QEMU Sparc SLAVIO aux io port emulation
   3  *
   4  * Copyright (c) 2005 Fabrice Bellard
   5  *
   6  * Permission is hereby granted, free of charge, to any person obtaining a copy
   7  * of this software and associated documentation files (the "Software"), to deal
   8  * in the Software without restriction, including without limitation the rights
   9  * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
  10  * copies of the Software, and to permit persons to whom the Software is
  11  * furnished to do so, subject to the following conditions:
  12  *
  13  * The above copyright notice and this permission notice shall be included in
  14  * all copies or substantial portions of the Software.
  15  *
  16  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  17  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  18  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
  19  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  20  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
  21  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
  22  * THE SOFTWARE.
  23  */
  24
  25 #include "sysemu.h"
  26 #include "sysbus.h"
  27
  28 /* debug misc */
  29 //#define DEBUG_MISC
  30
  31 /*
  32  * This is the auxio port, chip control and system control part of
  33  * chip STP2001 (Slave I/O), also produced as NCR89C105. See
  34  * http://www.ibiblio.org/pub/historic-linux/early-ports/Sparc/NCR/NCR89C105.txt
  35  *
  36  * This also includes the PMC CPU idle controller.
  37  */
  38
  39 #ifdef DEBUG_MISC
  40 #define MISC_DPRINTF(fmt, ...)                                  \
  41     do { printf("MISC: " fmt , ## __VA_ARGS__); } while (0)
  42 #else
  43 #define MISC_DPRINTF(fmt, ...)
  44 #endif
  45
  46 typedef struct MiscState {
  47     SysBusDevice busdev;
  48     qemu_irq irq;
  49     uint32_t dummy;
  50     uint8_t config;
  51     uint8_t aux1, aux2;
  52     uint8_t diag, mctrl;
  53     uint8_t sysctrl;
  54     uint16_t leds;
  55     qemu_irq fdc_tc;
  56 } MiscState;
  57
  58 typedef struct APCState {
  59     SysBusDevice busdev;
  60     qemu_irq cpu_halt;
  61 } APCState;
  62
  63 #define MISC_SIZE 1
  64 #define SYSCTRL_SIZE 4
  65
  66 #define AUX1_TC        0x02
  67
  68 #define AUX2_PWROFF    0x01
  69 #define AUX2_PWRINTCLR 0x02
  70 #define AUX2_PWRFAIL   0x20
  71
  72 #define CFG_PWRINTEN   0x08
  73
  74 #define SYS_RESET      0x01
  75 #define SYS_RESETSTAT  0x02
  76
  77 static void slavio_misc_update_irq(void *opaque)
  78 {
  79     MiscState *s = opaque;
  80
  81     if ((s->aux2 & AUX2_PWRFAIL) && (s->config & CFG_PWRINTEN)) {
  82         MISC_DPRINTF("Raise IRQ\n");
  83         qemu_irq_raise(s->irq);
  84     } else {
  85         MISC_DPRINTF("Lower IRQ\n");
  86         qemu_irq_lower(s->irq);
  87     }
  88 }
  89
  90 static void slavio_misc_reset(DeviceState *d)
  91 {
  92     MiscState *s = container_of(d, MiscState, busdev.qdev);
  93
  94     // Diagnostic and system control registers not cleared in reset
  95     s->config = s->aux1 = s->aux2 = s->mctrl = 0;
  96 }
  97
  98 static void slavio_set_power_fail(void *opaque, int irq, int power_failing)
  99 {
 100     MiscState *s = opaque;
 101
 102     MISC_DPRINTF("Power fail: %d, config: %d\n", power_failing, s->config);
 103     if (power_failing && (s->config & CFG_PWRINTEN)) {
 104         s->aux2 |= AUX2_PWRFAIL;
 105     } else {
 106         s->aux2 &= ~AUX2_PWRFAIL;
 107     }
 108     slavio_misc_update_irq(s);
 109 }
 110
 111 static void slavio_cfg_mem_writeb(void *opaque, target_phys_addr_t addr,
 112                                   uint32_t val)
 113 {
 114     MiscState *s = opaque;
 115
 116     MISC_DPRINTF("Write config %2.2x\n", val & 0xff);
 117     s->config = val & 0xff;
 118     slavio_misc_update_irq(s);
 119 }
 120
 121 static uint32_t slavio_cfg_mem_readb(void *opaque, target_phys_addr_t addr)
 122 {
 123     MiscState *s = opaque;
 124     uint32_t ret = 0;
 125
 126     ret = s->config;
 127     MISC_DPRINTF("Read config %2.2x\n", ret);
 128     return ret;
 129 }
 130
 131 static CPUReadMemoryFunc * const slavio_cfg_mem_read[3] = {
 132     slavio_cfg_mem_readb,
 133     NULL,
 134     NULL,
 135 };
 136
 137 static CPUWriteMemoryFunc * const slavio_cfg_mem_write[3] = {
 138     slavio_cfg_mem_writeb,
 139     NULL,
 140     NULL,
 141 };
 142
 143 static void slavio_diag_mem_writeb(void *opaque, target_phys_addr_t addr,
 144                                    uint32_t val)
 145 {
 146     MiscState *s = opaque;
 147
 148     MISC_DPRINTF("Write diag %2.2x\n", val & 0xff);
 149     s->diag = val & 0xff;
 150 }
 151
 152 static uint32_t slavio_diag_mem_readb(void *opaque, target_phys_addr_t addr)
 153 {
 154     MiscState *s = opaque;
 155     uint32_t ret = 0;
 156
 157     ret = s->diag;
 158     MISC_DPRINTF("Read diag %2.2x\n", ret);
 159     return ret;
 160 }
 161
 162 static CPUReadMemoryFunc * const slavio_diag_mem_read[3] = {
 163     slavio_diag_mem_readb,
 164     NULL,
 165     NULL,
 166 };
 167
 168 static CPUWriteMemoryFunc * const slavio_diag_mem_write[3] = {
 169     slavio_diag_mem_writeb,
 170     NULL,
 171     NULL,
 172 };
 173
 174 static void slavio_mdm_mem_writeb(void *opaque, target_phys_addr_t addr,
 175                                   uint32_t val)
 176 {
 177     MiscState *s = opaque;
 178
 179     MISC_DPRINTF("Write modem control %2.2x\n", val & 0xff);
 180     s->mctrl = val & 0xff;
 181 }
 182
 183 static uint32_t slavio_mdm_mem_readb(void *opaque, target_phys_addr_t addr)
 184 {
 185     MiscState *s = opaque;
 186     uint32_t ret = 0;
 187
 188     ret = s->mctrl;
 189     MISC_DPRINTF("Read modem control %2.2x\n", ret);
 190     return ret;
 191 }
 192
 193 static CPUReadMemoryFunc * const slavio_mdm_mem_read[3] = {
 194     slavio_mdm_mem_readb,
 195     NULL,
 196     NULL,
 197 };
 198
 199 static CPUWriteMemoryFunc * const slavio_mdm_mem_write[3] = {
 200     slavio_mdm_mem_writeb,
 201     NULL,
 202     NULL,
 203 };
 204
 205 static void slavio_aux1_mem_writeb(void *opaque, target_phys_addr_t addr,
 206                                    uint32_t val)
 207 {
 208     MiscState *s = opaque;
 209
 210     MISC_DPRINTF("Write aux1 %2.2x\n", val & 0xff);
 211     if (val & AUX1_TC) {
 212         // Send a pulse to floppy terminal count line
 213         if (s->fdc_tc) {
 214             qemu_irq_raise(s->fdc_tc);
 215             qemu_irq_lower(s->fdc_tc);
 216         }
 217         val &= ~AUX1_TC;
 218     }
 219     s->aux1 = val & 0xff;
 220 }
 221
 222 static uint32_t slavio_aux1_mem_readb(void *opaque, target_phys_addr_t addr)
 223 {
 224     MiscState *s = opaque;
 225     uint32_t ret = 0;
 226
 227     ret = s->aux1;
 228     MISC_DPRINTF("Read aux1 %2.2x\n", ret);
 229
 230     return ret;
 231 }
 232
 233 static CPUReadMemoryFunc * const slavio_aux1_mem_read[3] = {
 234     slavio_aux1_mem_readb,
 235     NULL,
 236     NULL,
 237 };
 238
 239 static CPUWriteMemoryFunc * const slavio_aux1_mem_write[3] = {
 240     slavio_aux1_mem_writeb,
 241     NULL,
 242     NULL,
 243 };
 244
 245 static void slavio_aux2_mem_writeb(void *opaque, target_phys_addr_t addr,
 246                                    uint32_t val)
 247 {
 248     MiscState *s = opaque;
 249
 250     val &= AUX2_PWRINTCLR | AUX2_PWROFF;
 251     MISC_DPRINTF("Write aux2 %2.2x\n", val);
 252     val |= s->aux2 & AUX2_PWRFAIL;
 253     if (val & AUX2_PWRINTCLR) // Clear Power Fail int
 254         val &= AUX2_PWROFF;
 255     s->aux2 = val;
 256     if (val & AUX2_PWROFF)
 257         qemu_system_shutdown_request();
 258     slavio_misc_update_irq(s);
 259 }
 260
 261 static uint32_t slavio_aux2_mem_readb(void *opaque, target_phys_addr_t addr)
 262 {
 263     MiscState *s = opaque;
 264     uint32_t ret = 0;
 265
 266     ret = s->aux2;
 267     MISC_DPRINTF("Read aux2 %2.2x\n", ret);
 268
 269     return ret;
 270 }
 271
 272 static CPUReadMemoryFunc * const slavio_aux2_mem_read[3] = {
 273     slavio_aux2_mem_readb,
 274     NULL,
 275     NULL,
 276 };
 277
 278 static CPUWriteMemoryFunc * const slavio_aux2_mem_write[3] = {
 279     slavio_aux2_mem_writeb,
 280     NULL,
 281     NULL,
 282 };
 283
 284 static void apc_mem_writeb(void *opaque, target_phys_addr_t addr, uint32_t val)
 285 {
 286     APCState *s = opaque;
 287
 288     MISC_DPRINTF("Write power management %2.2x\n", val & 0xff);
 289     qemu_irq_raise(s->cpu_halt);
 290 }
 291
 292 static uint32_t apc_mem_readb(void *opaque, target_phys_addr_t addr)
 293 {
 294     uint32_t ret = 0;
 295
 296     MISC_DPRINTF("Read power management %2.2x\n", ret);
 297     return ret;
 298 }
 299
 300 static CPUReadMemoryFunc * const apc_mem_read[3] = {
 301     apc_mem_readb,
 302     NULL,
 303     NULL,
 304 };
 305
 306 static CPUWriteMemoryFunc * const apc_mem_write[3] = {
 307     apc_mem_writeb,
 308     NULL,
 309     NULL,
 310 };
 311
 312 static uint32_t slavio_sysctrl_mem_readl(void *opaque, target_phys_addr_t addr)
 313 {
 314     MiscState *s = opaque;
 315     uint32_t ret = 0;
 316
 317     switch (addr) {
 318     case 0:
 319         ret = s->sysctrl;
 320         break;
 321     default:
 322         break;
 323     }
 324     MISC_DPRINTF("Read system control %08x\n", ret);
 325     return ret;
 326 }
 327
 328 static void slavio_sysctrl_mem_writel(void *opaque, target_phys_addr_t addr,
 329                                       uint32_t val)
 330 {
 331     MiscState *s = opaque;
 332
 333     MISC_DPRINTF("Write system control %08x\n", val);
 334     switch (addr) {
 335     case 0:
 336         if (val & SYS_RESET) {
 337             s->sysctrl = SYS_RESETSTAT;
 338             qemu_system_reset_request();
 339         }
 340         break;
 341     default:
 342         break;
 343     }
 344 }
 345
 346 static CPUReadMemoryFunc * const slavio_sysctrl_mem_read[3] = {
 347     NULL,
 348     NULL,
 349     slavio_sysctrl_mem_readl,
 350 };
 351
 352 static CPUWriteMemoryFunc * const slavio_sysctrl_mem_write[3] = {
 353     NULL,
 354     NULL,
 355     slavio_sysctrl_mem_writel,
 356 };
 357
 358 static uint32_t slavio_led_mem_readw(void *opaque, target_phys_addr_t addr)
 359 {
 360     MiscState *s = opaque;
 361     uint32_t ret = 0;
 362
 363     switch (addr) {
 364     case 0:
 365         ret = s->leds;
 366         break;
 367     default:
 368         break;
 369     }
 370     MISC_DPRINTF("Read diagnostic LED %04x\n", ret);
 371     return ret;
 372 }
 373
 374 static void slavio_led_mem_writew(void *opaque, target_phys_addr_t addr,
 375                                   uint32_t val)
 376 {
 377     MiscState *s = opaque;
 378
 379     MISC_DPRINTF("Write diagnostic LED %04x\n", val & 0xffff);
 380     switch (addr) {
 381     case 0:
 382         s->leds = val;
 383         break;
 384     default:
 385         break;
 386     }
 387 }
 388
 389 static CPUReadMemoryFunc * const slavio_led_mem_read[3] = {
 390     NULL,
 391     slavio_led_mem_readw,
 392     NULL,
 393 };
 394
 395 static CPUWriteMemoryFunc * const slavio_led_mem_write[3] = {
 396     NULL,
 397     slavio_led_mem_writew,
 398     NULL,
 399 };
 400
 401 static const VMStateDescription vmstate_misc = {
 402     .name ="slavio_misc",
 403     .version_id = 1,
 404     .minimum_version_id = 1,
 405     .minimum_version_id_old = 1,
 406     .fields      = (VMStateField []) {
 407         VMSTATE_UINT32(dummy, MiscState),
 408         VMSTATE_UINT8(config, MiscState),
 409         VMSTATE_UINT8(aux1, MiscState),
 410         VMSTATE_UINT8(aux2, MiscState),
 411         VMSTATE_UINT8(diag, MiscState),
 412         VMSTATE_UINT8(mctrl, MiscState),
 413         VMSTATE_UINT8(sysctrl, MiscState),
 414         VMSTATE_END_OF_LIST()
 415     }
 416 };
 417
 418 static int apc_init1(SysBusDevice *dev)
 419 {
 420     APCState *s = FROM_SYSBUS(APCState, dev);
 421     int io;
 422
 423     sysbus_init_irq(dev, &s->cpu_halt);
 424
 425     /* Power management (APC) XXX: not a Slavio device */
 426     io = cpu_register_io_memory(apc_mem_read, apc_mem_write, s);
 427     sysbus_init_mmio(dev, MISC_SIZE, io);
 428     return 0;
 429 }
 430
 431 static int slavio_misc_init1(SysBusDevice *dev)
 432 {
 433     MiscState *s = FROM_SYSBUS(MiscState, dev);
 434     int io;
 435
 436     sysbus_init_irq(dev, &s->irq);
 437     sysbus_init_irq(dev, &s->fdc_tc);
 438
 439     /* 8 bit registers */
 440     /* Slavio control */
 441     io = cpu_register_io_memory(slavio_cfg_mem_read,
 442                                 slavio_cfg_mem_write, s);
 443     sysbus_init_mmio(dev, MISC_SIZE, io);
 444
 445     /* Diagnostics */
 446     io = cpu_register_io_memory(slavio_diag_mem_read,
 447                                 slavio_diag_mem_write, s);
 448     sysbus_init_mmio(dev, MISC_SIZE, io);
 449
 450     /* Modem control */
 451     io = cpu_register_io_memory(slavio_mdm_mem_read,
 452                                 slavio_mdm_mem_write, s);
 453     sysbus_init_mmio(dev, MISC_SIZE, io);
 454
 455     /* 16 bit registers */
 456     /* ss600mp diag LEDs */
 457     io = cpu_register_io_memory(slavio_led_mem_read,
 458                                 slavio_led_mem_write, s);
 459     sysbus_init_mmio(dev, MISC_SIZE, io);
 460
 461     /* 32 bit registers */
 462     /* System control */
 463     io = cpu_register_io_memory(slavio_sysctrl_mem_read,
 464                                 slavio_sysctrl_mem_write, s);
 465     sysbus_init_mmio(dev, SYSCTRL_SIZE, io);
 466
 467     /* AUX 1 (Misc System Functions) */
 468     io = cpu_register_io_memory(slavio_aux1_mem_read,
 469                                 slavio_aux1_mem_write, s);
 470     sysbus_init_mmio(dev, MISC_SIZE, io);
 471
 472     /* AUX 2 (Software Powerdown Control) */
 473     io = cpu_register_io_memory(slavio_aux2_mem_read,
 474                                 slavio_aux2_mem_write, s);
 475     sysbus_init_mmio(dev, MISC_SIZE, io);
 476
 477     qdev_init_gpio_in(&dev->qdev, slavio_set_power_fail, 1);
 478
 479     return 0;
 480 }
 481
 482 static SysBusDeviceInfo slavio_misc_info = {
 483     .init = slavio_misc_init1,
 484     .qdev.name  = "slavio_misc",
 485     .qdev.size  = sizeof(MiscState),
 486     .qdev.vmsd  = &vmstate_misc,
 487     .qdev.reset  = slavio_misc_reset,
 488 };
 489
 490 static SysBusDeviceInfo apc_info = {
 491     .init = apc_init1,
 492     .qdev.name  = "apc",
 493     .qdev.size  = sizeof(MiscState),
 494 };
 495
 496 static void slavio_misc_register_devices(void)
 497 {
 498     sysbus_register_withprop(&slavio_misc_info);
 499     sysbus_register_withprop(&apc_info);
 500 }
 501
 502 device_init(slavio_misc_register_devices)