target-arm: Use lookup table for size check on Neon 3-reg-same insns
[qemu.git] / qemu-timer.h
blob75d567578b3c397f6ab6fa9abd7023848ce5b228
1 #ifndef QEMU_TIMER_H
2 #define QEMU_TIMER_H
4 #include "qemu-common.h"
5 #include <time.h>
6 #include <sys/time.h>
8 #ifdef _WIN32
9 #include <windows.h>
10 #include <mmsystem.h>
11 #endif
13 /* timers */
15 #define SCALE_MS 1000000
16 #define SCALE_US 1000
17 #define SCALE_NS 1
19 typedef struct QEMUClock QEMUClock;
20 typedef void QEMUTimerCB(void *opaque);
22 /* The real time clock should be used only for stuff which does not
23 change the virtual machine state, as it is run even if the virtual
24 machine is stopped. The real time clock has a frequency of 1000
25 Hz. */
26 extern QEMUClock *rt_clock;
28 /* The virtual clock is only run during the emulation. It is stopped
29 when the virtual machine is stopped. Virtual timers use a high
30 precision clock, usually cpu cycles (use ticks_per_sec). */
31 extern QEMUClock *vm_clock;
33 /* The host clock should be use for device models that emulate accurate
34 real time sources. It will continue to run when the virtual machine
35 is suspended, and it will reflect system time changes the host may
36 undergo (e.g. due to NTP). The host clock has the same precision as
37 the virtual clock. */
38 extern QEMUClock *host_clock;
40 int64_t qemu_get_clock_ns(QEMUClock *clock);
41 void qemu_clock_enable(QEMUClock *clock, int enabled);
43 QEMUTimer *qemu_new_timer(QEMUClock *clock, int scale,
44 QEMUTimerCB *cb, void *opaque);
45 void qemu_free_timer(QEMUTimer *ts);
46 void qemu_del_timer(QEMUTimer *ts);
47 void qemu_mod_timer(QEMUTimer *ts, int64_t expire_time);
48 int qemu_timer_pending(QEMUTimer *ts);
49 int qemu_timer_expired(QEMUTimer *timer_head, int64_t current_time);
51 void qemu_run_all_timers(void);
52 int qemu_alarm_pending(void);
53 int64_t qemu_next_deadline(void);
54 void configure_alarms(char const *opt);
55 void configure_icount(const char *option);
56 int qemu_calculate_timeout(void);
57 void init_clocks(void);
58 int init_timer_alarm(void);
59 void quit_timers(void);
61 static inline QEMUTimer *qemu_new_timer_ns(QEMUClock *clock, QEMUTimerCB *cb,
62 void *opaque)
64 return qemu_new_timer(clock, SCALE_NS, cb, opaque);
67 static inline QEMUTimer *qemu_new_timer_ms(QEMUClock *clock, QEMUTimerCB *cb,
68 void *opaque)
70 return qemu_new_timer(clock, SCALE_MS, cb, opaque);
73 static inline int64_t qemu_get_clock_ms(QEMUClock *clock)
75 return qemu_get_clock_ns(clock) / SCALE_MS;
78 static inline int64_t get_ticks_per_sec(void)
80 return 1000000000LL;
83 /* real time host monotonic timer */
84 static inline int64_t get_clock_realtime(void)
86 struct timeval tv;
88 gettimeofday(&tv, NULL);
89 return tv.tv_sec * 1000000000LL + (tv.tv_usec * 1000);
92 /* Warning: don't insert tracepoints into these functions, they are
93 also used by simpletrace backend and tracepoints would cause
94 an infinite recursion! */
95 #ifdef _WIN32
96 extern int64_t clock_freq;
98 static inline int64_t get_clock(void)
100 LARGE_INTEGER ti;
101 QueryPerformanceCounter(&ti);
102 return muldiv64(ti.QuadPart, get_ticks_per_sec(), clock_freq);
105 #else
107 extern int use_rt_clock;
109 static inline int64_t get_clock(void)
111 #if defined(__linux__) || (defined(__FreeBSD__) && __FreeBSD_version >= 500000) \
112 || defined(__DragonFly__) || defined(__FreeBSD_kernel__)
113 if (use_rt_clock) {
114 struct timespec ts;
115 clock_gettime(CLOCK_MONOTONIC, &ts);
116 return ts.tv_sec * 1000000000LL + ts.tv_nsec;
117 } else
118 #endif
120 /* XXX: using gettimeofday leads to problems if the date
121 changes, so it should be avoided. */
122 return get_clock_realtime();
125 #endif
127 void qemu_get_timer(QEMUFile *f, QEMUTimer *ts);
128 void qemu_put_timer(QEMUFile *f, QEMUTimer *ts);
130 /* ptimer.c */
131 typedef struct ptimer_state ptimer_state;
132 typedef void (*ptimer_cb)(void *opaque);
134 ptimer_state *ptimer_init(QEMUBH *bh);
135 void ptimer_set_period(ptimer_state *s, int64_t period);
136 void ptimer_set_freq(ptimer_state *s, uint32_t freq);
137 void ptimer_set_limit(ptimer_state *s, uint64_t limit, int reload);
138 uint64_t ptimer_get_count(ptimer_state *s);
139 void ptimer_set_count(ptimer_state *s, uint64_t count);
140 void ptimer_run(ptimer_state *s, int oneshot);
141 void ptimer_stop(ptimer_state *s);
142 void qemu_put_ptimer(QEMUFile *f, ptimer_state *s);
143 void qemu_get_ptimer(QEMUFile *f, ptimer_state *s);
145 /* icount */
146 int64_t qemu_icount_round(int64_t count);
147 extern int64_t qemu_icount;
148 extern int use_icount;
149 extern int icount_time_shift;
150 extern int64_t qemu_icount_bias;
151 int64_t cpu_get_icount(void);
153 /*******************************************/
154 /* host CPU ticks (if available) */
156 #if defined(_ARCH_PPC)
158 static inline int64_t cpu_get_real_ticks(void)
160 int64_t retval;
161 #ifdef _ARCH_PPC64
162 /* This reads timebase in one 64bit go and includes Cell workaround from:
163 http://ozlabs.org/pipermail/linuxppc-dev/2006-October/027052.html
165 __asm__ __volatile__ ("mftb %0\n\t"
166 "cmpwi %0,0\n\t"
167 "beq- $-8"
168 : "=r" (retval));
169 #else
170 /* http://ozlabs.org/pipermail/linuxppc-dev/1999-October/003889.html */
171 unsigned long junk;
172 __asm__ __volatile__ ("mfspr %1,269\n\t" /* mftbu */
173 "mfspr %L0,268\n\t" /* mftb */
174 "mfspr %0,269\n\t" /* mftbu */
175 "cmpw %0,%1\n\t"
176 "bne $-16"
177 : "=r" (retval), "=r" (junk));
178 #endif
179 return retval;
182 #elif defined(__i386__)
184 static inline int64_t cpu_get_real_ticks(void)
186 int64_t val;
187 asm volatile ("rdtsc" : "=A" (val));
188 return val;
191 #elif defined(__x86_64__)
193 static inline int64_t cpu_get_real_ticks(void)
195 uint32_t low,high;
196 int64_t val;
197 asm volatile("rdtsc" : "=a" (low), "=d" (high));
198 val = high;
199 val <<= 32;
200 val |= low;
201 return val;
204 #elif defined(__hppa__)
206 static inline int64_t cpu_get_real_ticks(void)
208 int val;
209 asm volatile ("mfctl %%cr16, %0" : "=r"(val));
210 return val;
213 #elif defined(__ia64)
215 static inline int64_t cpu_get_real_ticks(void)
217 int64_t val;
218 asm volatile ("mov %0 = ar.itc" : "=r"(val) :: "memory");
219 return val;
222 #elif defined(__s390__)
224 static inline int64_t cpu_get_real_ticks(void)
226 int64_t val;
227 asm volatile("stck 0(%1)" : "=m" (val) : "a" (&val) : "cc");
228 return val;
231 #elif defined(__sparc_v8plus__) || defined(__sparc_v8plusa__) || defined(__sparc_v9__)
233 static inline int64_t cpu_get_real_ticks (void)
235 #if defined(_LP64)
236 uint64_t rval;
237 asm volatile("rd %%tick,%0" : "=r"(rval));
238 return rval;
239 #else
240 union {
241 uint64_t i64;
242 struct {
243 uint32_t high;
244 uint32_t low;
245 } i32;
246 } rval;
247 asm volatile("rd %%tick,%1; srlx %1,32,%0"
248 : "=r"(rval.i32.high), "=r"(rval.i32.low));
249 return rval.i64;
250 #endif
253 #elif defined(__mips__) && \
254 ((defined(__mips_isa_rev) && __mips_isa_rev >= 2) || defined(__linux__))
256 * binutils wants to use rdhwr only on mips32r2
257 * but as linux kernel emulate it, it's fine
258 * to use it.
261 #define MIPS_RDHWR(rd, value) { \
262 __asm__ __volatile__ (".set push\n\t" \
263 ".set mips32r2\n\t" \
264 "rdhwr %0, "rd"\n\t" \
265 ".set pop" \
266 : "=r" (value)); \
269 static inline int64_t cpu_get_real_ticks(void)
271 /* On kernels >= 2.6.25 rdhwr <reg>, $2 and $3 are emulated */
272 uint32_t count;
273 static uint32_t cyc_per_count = 0;
275 if (!cyc_per_count) {
276 MIPS_RDHWR("$3", cyc_per_count);
279 MIPS_RDHWR("$2", count);
280 return (int64_t)(count * cyc_per_count);
283 #elif defined(__alpha__)
285 static inline int64_t cpu_get_real_ticks(void)
287 uint64_t cc;
288 uint32_t cur, ofs;
290 asm volatile("rpcc %0" : "=r"(cc));
291 cur = cc;
292 ofs = cc >> 32;
293 return cur - ofs;
296 #else
297 /* The host CPU doesn't have an easily accessible cycle counter.
298 Just return a monotonically increasing value. This will be
299 totally wrong, but hopefully better than nothing. */
300 static inline int64_t cpu_get_real_ticks (void)
302 static int64_t ticks = 0;
303 return ticks++;
305 #endif
307 #ifdef NEED_CPU_H
308 /* Deterministic execution requires that IO only be performed on the last
309 instruction of a TB so that interrupts take effect immediately. */
310 static inline int can_do_io(CPUState *env)
312 if (!use_icount)
313 return 1;
315 /* If not executing code then assume we are ok. */
316 if (!env->current_tb)
317 return 1;
319 return env->can_do_io != 0;
321 #endif
323 #ifdef CONFIG_PROFILER
324 static inline int64_t profile_getclock(void)
326 return cpu_get_real_ticks();
329 extern int64_t qemu_time, qemu_time_start;
330 extern int64_t tlb_flush_time;
331 extern int64_t dev_time;
332 #endif
334 #endif