2 * QEMU System Emulator block driver
4 * Copyright (c) 2003 Fabrice Bellard
6 * Permission is hereby granted, free of charge, to any person obtaining a copy
7 * of this software and associated documentation files (the "Software"), to deal
8 * in the Software without restriction, including without limitation the rights
9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10 * copies of the Software, and to permit persons to whom the Software is
11 * furnished to do so, subject to the following conditions:
13 * The above copyright notice and this permission notice shall be included in
14 * all copies or substantial portions of the Software.
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
24 #include "config-host.h"
25 #include "qemu-common.h"
27 #include "monitor/monitor.h"
28 #include "block/block_int.h"
29 #include "block/blockjob.h"
30 #include "qemu/module.h"
31 #include "qapi/qmp/qjson.h"
32 #include "sysemu/sysemu.h"
33 #include "qemu/notify.h"
34 #include "block/coroutine.h"
35 #include "qmp-commands.h"
36 #include "qemu/timer.h"
39 #include <sys/types.h>
41 #include <sys/ioctl.h>
42 #include <sys/queue.h>
52 #define NOT_DONE 0x7fffffff /* used while emulated sync operation in progress */
55 BDRV_REQ_COPY_ON_READ
= 0x1,
56 BDRV_REQ_ZERO_WRITE
= 0x2,
59 static void bdrv_dev_change_media_cb(BlockDriverState
*bs
, bool load
);
60 static BlockDriverAIOCB
*bdrv_aio_readv_em(BlockDriverState
*bs
,
61 int64_t sector_num
, QEMUIOVector
*qiov
, int nb_sectors
,
62 BlockDriverCompletionFunc
*cb
, void *opaque
);
63 static BlockDriverAIOCB
*bdrv_aio_writev_em(BlockDriverState
*bs
,
64 int64_t sector_num
, QEMUIOVector
*qiov
, int nb_sectors
,
65 BlockDriverCompletionFunc
*cb
, void *opaque
);
66 static int coroutine_fn
bdrv_co_readv_em(BlockDriverState
*bs
,
67 int64_t sector_num
, int nb_sectors
,
69 static int coroutine_fn
bdrv_co_writev_em(BlockDriverState
*bs
,
70 int64_t sector_num
, int nb_sectors
,
72 static int coroutine_fn
bdrv_co_do_readv(BlockDriverState
*bs
,
73 int64_t sector_num
, int nb_sectors
, QEMUIOVector
*qiov
,
74 BdrvRequestFlags flags
);
75 static int coroutine_fn
bdrv_co_do_writev(BlockDriverState
*bs
,
76 int64_t sector_num
, int nb_sectors
, QEMUIOVector
*qiov
,
77 BdrvRequestFlags flags
);
78 static BlockDriverAIOCB
*bdrv_co_aio_rw_vector(BlockDriverState
*bs
,
82 BlockDriverCompletionFunc
*cb
,
85 static void coroutine_fn
bdrv_co_do_rw(void *opaque
);
86 static int coroutine_fn
bdrv_co_do_write_zeroes(BlockDriverState
*bs
,
87 int64_t sector_num
, int nb_sectors
);
89 static bool bdrv_exceed_bps_limits(BlockDriverState
*bs
, int nb_sectors
,
90 bool is_write
, double elapsed_time
, uint64_t *wait
);
91 static bool bdrv_exceed_iops_limits(BlockDriverState
*bs
, bool is_write
,
92 double elapsed_time
, uint64_t *wait
);
93 static bool bdrv_exceed_io_limits(BlockDriverState
*bs
, int nb_sectors
,
94 bool is_write
, int64_t *wait
);
96 static QTAILQ_HEAD(, BlockDriverState
) bdrv_states
=
97 QTAILQ_HEAD_INITIALIZER(bdrv_states
);
99 static QLIST_HEAD(, BlockDriver
) bdrv_drivers
=
100 QLIST_HEAD_INITIALIZER(bdrv_drivers
);
102 /* If non-zero, use only whitelisted block drivers */
103 static int use_bdrv_whitelist
;
106 static int is_windows_drive_prefix(const char *filename
)
108 return (((filename
[0] >= 'a' && filename
[0] <= 'z') ||
109 (filename
[0] >= 'A' && filename
[0] <= 'Z')) &&
113 int is_windows_drive(const char *filename
)
115 if (is_windows_drive_prefix(filename
) &&
118 if (strstart(filename
, "\\\\.\\", NULL
) ||
119 strstart(filename
, "//./", NULL
))
125 /* throttling disk I/O limits */
126 void bdrv_io_limits_disable(BlockDriverState
*bs
)
128 bs
->io_limits_enabled
= false;
130 while (qemu_co_queue_next(&bs
->throttled_reqs
));
132 if (bs
->block_timer
) {
133 qemu_del_timer(bs
->block_timer
);
134 qemu_free_timer(bs
->block_timer
);
135 bs
->block_timer
= NULL
;
142 static void bdrv_block_timer(void *opaque
)
144 BlockDriverState
*bs
= opaque
;
146 qemu_co_queue_next(&bs
->throttled_reqs
);
149 void bdrv_io_limits_enable(BlockDriverState
*bs
)
151 qemu_co_queue_init(&bs
->throttled_reqs
);
152 bs
->block_timer
= qemu_new_timer_ns(vm_clock
, bdrv_block_timer
, bs
);
153 bs
->io_limits_enabled
= true;
156 bool bdrv_io_limits_enabled(BlockDriverState
*bs
)
158 BlockIOLimit
*io_limits
= &bs
->io_limits
;
159 return io_limits
->bps
[BLOCK_IO_LIMIT_READ
]
160 || io_limits
->bps
[BLOCK_IO_LIMIT_WRITE
]
161 || io_limits
->bps
[BLOCK_IO_LIMIT_TOTAL
]
162 || io_limits
->iops
[BLOCK_IO_LIMIT_READ
]
163 || io_limits
->iops
[BLOCK_IO_LIMIT_WRITE
]
164 || io_limits
->iops
[BLOCK_IO_LIMIT_TOTAL
];
167 static void bdrv_io_limits_intercept(BlockDriverState
*bs
,
168 bool is_write
, int nb_sectors
)
170 int64_t wait_time
= -1;
172 if (!qemu_co_queue_empty(&bs
->throttled_reqs
)) {
173 qemu_co_queue_wait(&bs
->throttled_reqs
);
176 /* In fact, we hope to keep each request's timing, in FIFO mode. The next
177 * throttled requests will not be dequeued until the current request is
178 * allowed to be serviced. So if the current request still exceeds the
179 * limits, it will be inserted to the head. All requests followed it will
180 * be still in throttled_reqs queue.
183 while (bdrv_exceed_io_limits(bs
, nb_sectors
, is_write
, &wait_time
)) {
184 qemu_mod_timer(bs
->block_timer
,
185 wait_time
+ qemu_get_clock_ns(vm_clock
));
186 qemu_co_queue_wait_insert_head(&bs
->throttled_reqs
);
189 qemu_co_queue_next(&bs
->throttled_reqs
);
192 /* check if the path starts with "<protocol>:" */
193 static int path_has_protocol(const char *path
)
198 if (is_windows_drive(path
) ||
199 is_windows_drive_prefix(path
)) {
202 p
= path
+ strcspn(path
, ":/\\");
204 p
= path
+ strcspn(path
, ":/");
210 int path_is_absolute(const char *path
)
213 /* specific case for names like: "\\.\d:" */
214 if (is_windows_drive(path
) || is_windows_drive_prefix(path
)) {
217 return (*path
== '/' || *path
== '\\');
219 return (*path
== '/');
223 /* if filename is absolute, just copy it to dest. Otherwise, build a
224 path to it by considering it is relative to base_path. URL are
226 void path_combine(char *dest
, int dest_size
,
227 const char *base_path
,
228 const char *filename
)
235 if (path_is_absolute(filename
)) {
236 pstrcpy(dest
, dest_size
, filename
);
238 p
= strchr(base_path
, ':');
243 p1
= strrchr(base_path
, '/');
247 p2
= strrchr(base_path
, '\\');
259 if (len
> dest_size
- 1)
261 memcpy(dest
, base_path
, len
);
263 pstrcat(dest
, dest_size
, filename
);
267 void bdrv_get_full_backing_filename(BlockDriverState
*bs
, char *dest
, size_t sz
)
269 if (bs
->backing_file
[0] == '\0' || path_has_protocol(bs
->backing_file
)) {
270 pstrcpy(dest
, sz
, bs
->backing_file
);
272 path_combine(dest
, sz
, bs
->filename
, bs
->backing_file
);
276 void bdrv_register(BlockDriver
*bdrv
)
278 /* Block drivers without coroutine functions need emulation */
279 if (!bdrv
->bdrv_co_readv
) {
280 bdrv
->bdrv_co_readv
= bdrv_co_readv_em
;
281 bdrv
->bdrv_co_writev
= bdrv_co_writev_em
;
283 /* bdrv_co_readv_em()/brdv_co_writev_em() work in terms of aio, so if
284 * the block driver lacks aio we need to emulate that too.
286 if (!bdrv
->bdrv_aio_readv
) {
287 /* add AIO emulation layer */
288 bdrv
->bdrv_aio_readv
= bdrv_aio_readv_em
;
289 bdrv
->bdrv_aio_writev
= bdrv_aio_writev_em
;
293 QLIST_INSERT_HEAD(&bdrv_drivers
, bdrv
, list
);
296 /* create a new block device (by default it is empty) */
297 BlockDriverState
*bdrv_new(const char *device_name
)
299 BlockDriverState
*bs
;
301 bs
= g_malloc0(sizeof(BlockDriverState
));
302 pstrcpy(bs
->device_name
, sizeof(bs
->device_name
), device_name
);
303 if (device_name
[0] != '\0') {
304 QTAILQ_INSERT_TAIL(&bdrv_states
, bs
, list
);
306 bdrv_iostatus_disable(bs
);
307 notifier_list_init(&bs
->close_notifiers
);
312 void bdrv_add_close_notifier(BlockDriverState
*bs
, Notifier
*notify
)
314 notifier_list_add(&bs
->close_notifiers
, notify
);
317 BlockDriver
*bdrv_find_format(const char *format_name
)
320 QLIST_FOREACH(drv1
, &bdrv_drivers
, list
) {
321 if (!strcmp(drv1
->format_name
, format_name
)) {
328 static int bdrv_is_whitelisted(BlockDriver
*drv
, bool read_only
)
330 static const char *whitelist_rw
[] = {
331 CONFIG_BDRV_RW_WHITELIST
333 static const char *whitelist_ro
[] = {
334 CONFIG_BDRV_RO_WHITELIST
338 if (!whitelist_rw
[0] && !whitelist_ro
[0]) {
339 return 1; /* no whitelist, anything goes */
342 for (p
= whitelist_rw
; *p
; p
++) {
343 if (!strcmp(drv
->format_name
, *p
)) {
348 for (p
= whitelist_ro
; *p
; p
++) {
349 if (!strcmp(drv
->format_name
, *p
)) {
357 BlockDriver
*bdrv_find_whitelisted_format(const char *format_name
,
360 BlockDriver
*drv
= bdrv_find_format(format_name
);
361 return drv
&& bdrv_is_whitelisted(drv
, read_only
) ? drv
: NULL
;
364 typedef struct CreateCo
{
367 QEMUOptionParameter
*options
;
371 static void coroutine_fn
bdrv_create_co_entry(void *opaque
)
373 CreateCo
*cco
= opaque
;
376 cco
->ret
= cco
->drv
->bdrv_create(cco
->filename
, cco
->options
);
379 int bdrv_create(BlockDriver
*drv
, const char* filename
,
380 QEMUOptionParameter
*options
)
387 .filename
= g_strdup(filename
),
392 if (!drv
->bdrv_create
) {
397 if (qemu_in_coroutine()) {
398 /* Fast-path if already in coroutine context */
399 bdrv_create_co_entry(&cco
);
401 co
= qemu_coroutine_create(bdrv_create_co_entry
);
402 qemu_coroutine_enter(co
, &cco
);
403 while (cco
.ret
== NOT_DONE
) {
411 g_free(cco
.filename
);
415 int bdrv_create_file(const char* filename
, QEMUOptionParameter
*options
)
419 drv
= bdrv_find_protocol(filename
);
424 return bdrv_create(drv
, filename
, options
);
428 * Create a uniquely-named empty temporary file.
429 * Return 0 upon success, otherwise a negative errno value.
431 int get_tmp_filename(char *filename
, int size
)
434 char temp_dir
[MAX_PATH
];
435 /* GetTempFileName requires that its output buffer (4th param)
436 have length MAX_PATH or greater. */
437 assert(size
>= MAX_PATH
);
438 return (GetTempPath(MAX_PATH
, temp_dir
)
439 && GetTempFileName(temp_dir
, "qem", 0, filename
)
440 ? 0 : -GetLastError());
444 tmpdir
= getenv("TMPDIR");
447 if (snprintf(filename
, size
, "%s/vl.XXXXXX", tmpdir
) >= size
) {
450 fd
= mkstemp(filename
);
454 if (close(fd
) != 0) {
463 * Detect host devices. By convention, /dev/cdrom[N] is always
464 * recognized as a host CDROM.
466 static BlockDriver
*find_hdev_driver(const char *filename
)
468 int score_max
= 0, score
;
469 BlockDriver
*drv
= NULL
, *d
;
471 QLIST_FOREACH(d
, &bdrv_drivers
, list
) {
472 if (d
->bdrv_probe_device
) {
473 score
= d
->bdrv_probe_device(filename
);
474 if (score
> score_max
) {
484 BlockDriver
*bdrv_find_protocol(const char *filename
)
491 /* TODO Drivers without bdrv_file_open must be specified explicitly */
494 * XXX(hch): we really should not let host device detection
495 * override an explicit protocol specification, but moving this
496 * later breaks access to device names with colons in them.
497 * Thanks to the brain-dead persistent naming schemes on udev-
498 * based Linux systems those actually are quite common.
500 drv1
= find_hdev_driver(filename
);
505 if (!path_has_protocol(filename
)) {
506 return bdrv_find_format("file");
508 p
= strchr(filename
, ':');
511 if (len
> sizeof(protocol
) - 1)
512 len
= sizeof(protocol
) - 1;
513 memcpy(protocol
, filename
, len
);
514 protocol
[len
] = '\0';
515 QLIST_FOREACH(drv1
, &bdrv_drivers
, list
) {
516 if (drv1
->protocol_name
&&
517 !strcmp(drv1
->protocol_name
, protocol
)) {
524 static int find_image_format(BlockDriverState
*bs
, const char *filename
,
527 int score
, score_max
;
528 BlockDriver
*drv1
, *drv
;
532 /* Return the raw BlockDriver * to scsi-generic devices or empty drives */
533 if (bs
->sg
|| !bdrv_is_inserted(bs
) || bdrv_getlength(bs
) == 0) {
534 drv
= bdrv_find_format("raw");
542 ret
= bdrv_pread(bs
, 0, buf
, sizeof(buf
));
550 QLIST_FOREACH(drv1
, &bdrv_drivers
, list
) {
551 if (drv1
->bdrv_probe
) {
552 score
= drv1
->bdrv_probe(buf
, ret
, filename
);
553 if (score
> score_max
) {
567 * Set the current 'total_sectors' value
569 static int refresh_total_sectors(BlockDriverState
*bs
, int64_t hint
)
571 BlockDriver
*drv
= bs
->drv
;
573 /* Do not attempt drv->bdrv_getlength() on scsi-generic devices */
577 /* query actual device if possible, otherwise just trust the hint */
578 if (drv
->bdrv_getlength
) {
579 int64_t length
= drv
->bdrv_getlength(bs
);
583 hint
= length
>> BDRV_SECTOR_BITS
;
586 bs
->total_sectors
= hint
;
591 * Set open flags for a given discard mode
593 * Return 0 on success, -1 if the discard mode was invalid.
595 int bdrv_parse_discard_flags(const char *mode
, int *flags
)
597 *flags
&= ~BDRV_O_UNMAP
;
599 if (!strcmp(mode
, "off") || !strcmp(mode
, "ignore")) {
601 } else if (!strcmp(mode
, "on") || !strcmp(mode
, "unmap")) {
602 *flags
|= BDRV_O_UNMAP
;
611 * Set open flags for a given cache mode
613 * Return 0 on success, -1 if the cache mode was invalid.
615 int bdrv_parse_cache_flags(const char *mode
, int *flags
)
617 *flags
&= ~BDRV_O_CACHE_MASK
;
619 if (!strcmp(mode
, "off") || !strcmp(mode
, "none")) {
620 *flags
|= BDRV_O_NOCACHE
| BDRV_O_CACHE_WB
;
621 } else if (!strcmp(mode
, "directsync")) {
622 *flags
|= BDRV_O_NOCACHE
;
623 } else if (!strcmp(mode
, "writeback")) {
624 *flags
|= BDRV_O_CACHE_WB
;
625 } else if (!strcmp(mode
, "unsafe")) {
626 *flags
|= BDRV_O_CACHE_WB
;
627 *flags
|= BDRV_O_NO_FLUSH
;
628 } else if (!strcmp(mode
, "writethrough")) {
629 /* this is the default */
638 * The copy-on-read flag is actually a reference count so multiple users may
639 * use the feature without worrying about clobbering its previous state.
640 * Copy-on-read stays enabled until all users have called to disable it.
642 void bdrv_enable_copy_on_read(BlockDriverState
*bs
)
647 void bdrv_disable_copy_on_read(BlockDriverState
*bs
)
649 assert(bs
->copy_on_read
> 0);
653 static int bdrv_open_flags(BlockDriverState
*bs
, int flags
)
655 int open_flags
= flags
| BDRV_O_CACHE_WB
;
658 * Clear flags that are internal to the block layer before opening the
661 open_flags
&= ~(BDRV_O_SNAPSHOT
| BDRV_O_NO_BACKING
);
664 * Snapshots should be writable.
666 if (bs
->is_temporary
) {
667 open_flags
|= BDRV_O_RDWR
;
674 * Common part for opening disk images and files
676 * Removes all processed options from *options.
678 static int bdrv_open_common(BlockDriverState
*bs
, BlockDriverState
*file
,
679 QDict
*options
, int flags
, BlockDriver
*drv
)
682 const char *filename
;
685 assert(bs
->file
== NULL
);
686 assert(options
!= NULL
&& bs
->options
!= options
);
689 filename
= file
->filename
;
691 filename
= qdict_get_try_str(options
, "filename");
694 trace_bdrv_open_common(bs
, filename
?: "", flags
, drv
->format_name
);
696 /* bdrv_open() with directly using a protocol as drv. This layer is already
697 * opened, so assign it to bs (while file becomes a closed BlockDriverState)
698 * and return immediately. */
699 if (file
!= NULL
&& drv
->bdrv_file_open
) {
704 bs
->open_flags
= flags
;
705 bs
->buffer_alignment
= 512;
706 open_flags
= bdrv_open_flags(bs
, flags
);
707 bs
->read_only
= !(open_flags
& BDRV_O_RDWR
);
709 if (use_bdrv_whitelist
&& !bdrv_is_whitelisted(drv
, bs
->read_only
)) {
713 assert(bs
->copy_on_read
== 0); /* bdrv_new() and bdrv_close() make it so */
714 if (!bs
->read_only
&& (flags
& BDRV_O_COPY_ON_READ
)) {
715 bdrv_enable_copy_on_read(bs
);
718 if (filename
!= NULL
) {
719 pstrcpy(bs
->filename
, sizeof(bs
->filename
), filename
);
721 bs
->filename
[0] = '\0';
725 bs
->opaque
= g_malloc0(drv
->instance_size
);
727 bs
->enable_write_cache
= !!(flags
& BDRV_O_CACHE_WB
);
729 /* Open the image, either directly or using a protocol */
730 if (drv
->bdrv_file_open
) {
731 assert(file
== NULL
);
732 assert(drv
->bdrv_parse_filename
|| filename
!= NULL
);
733 ret
= drv
->bdrv_file_open(bs
, options
, open_flags
);
736 qerror_report(ERROR_CLASS_GENERIC_ERROR
, "Can't use '%s' as a "
737 "block driver for the protocol level",
742 assert(file
!= NULL
);
744 ret
= drv
->bdrv_open(bs
, options
, open_flags
);
751 ret
= refresh_total_sectors(bs
, bs
->total_sectors
);
757 if (bs
->is_temporary
) {
758 assert(filename
!= NULL
);
773 * Opens a file using a protocol (file, host_device, nbd, ...)
775 * options is a QDict of options to pass to the block drivers, or NULL for an
776 * empty set of options. The reference to the QDict belongs to the block layer
777 * after the call (even on failure), so if the caller intends to reuse the
778 * dictionary, it needs to use QINCREF() before calling bdrv_file_open.
780 int bdrv_file_open(BlockDriverState
**pbs
, const char *filename
,
781 QDict
*options
, int flags
)
783 BlockDriverState
*bs
;
788 /* NULL means an empty set of options */
789 if (options
== NULL
) {
790 options
= qdict_new();
794 bs
->options
= options
;
795 options
= qdict_clone_shallow(options
);
797 /* Fetch the file name from the options QDict if necessary */
799 filename
= qdict_get_try_str(options
, "filename");
800 } else if (filename
&& !qdict_haskey(options
, "filename")) {
801 qdict_put(options
, "filename", qstring_from_str(filename
));
803 qerror_report(ERROR_CLASS_GENERIC_ERROR
, "Can't specify 'file' and "
804 "'filename' options at the same time");
809 /* Find the right block driver */
810 drvname
= qdict_get_try_str(options
, "driver");
812 drv
= bdrv_find_whitelisted_format(drvname
, !(flags
& BDRV_O_RDWR
));
813 qdict_del(options
, "driver");
814 } else if (filename
) {
815 drv
= bdrv_find_protocol(filename
);
817 qerror_report(ERROR_CLASS_GENERIC_ERROR
,
818 "Must specify either driver or file");
827 /* Parse the filename and open it */
828 if (drv
->bdrv_parse_filename
&& filename
) {
829 Error
*local_err
= NULL
;
830 drv
->bdrv_parse_filename(filename
, options
, &local_err
);
831 if (error_is_set(&local_err
)) {
832 qerror_report_err(local_err
);
833 error_free(local_err
);
837 qdict_del(options
, "filename");
838 } else if (!drv
->bdrv_parse_filename
&& !filename
) {
839 qerror_report(ERROR_CLASS_GENERIC_ERROR
,
840 "The '%s' block driver requires a file name",
846 ret
= bdrv_open_common(bs
, NULL
, options
, flags
, drv
);
851 /* Check if any unknown options were used */
852 if (qdict_size(options
) != 0) {
853 const QDictEntry
*entry
= qdict_first(options
);
854 qerror_report(ERROR_CLASS_GENERIC_ERROR
, "Block protocol '%s' doesn't "
855 "support the option '%s'",
856 drv
->format_name
, entry
->key
);
869 QDECREF(bs
->options
);
876 * Opens the backing file for a BlockDriverState if not yet open
878 * options is a QDict of options to pass to the block drivers, or NULL for an
879 * empty set of options. The reference to the QDict is transferred to this
880 * function (even on failure), so if the caller intends to reuse the dictionary,
881 * it needs to use QINCREF() before calling bdrv_file_open.
883 int bdrv_open_backing_file(BlockDriverState
*bs
, QDict
*options
)
885 char backing_filename
[PATH_MAX
];
887 BlockDriver
*back_drv
= NULL
;
889 if (bs
->backing_hd
!= NULL
) {
894 /* NULL means an empty set of options */
895 if (options
== NULL
) {
896 options
= qdict_new();
899 bs
->open_flags
&= ~BDRV_O_NO_BACKING
;
900 if (qdict_haskey(options
, "file.filename")) {
901 backing_filename
[0] = '\0';
902 } else if (bs
->backing_file
[0] == '\0' && qdict_size(options
) == 0) {
907 bs
->backing_hd
= bdrv_new("");
908 bdrv_get_full_backing_filename(bs
, backing_filename
,
909 sizeof(backing_filename
));
911 if (bs
->backing_format
[0] != '\0') {
912 back_drv
= bdrv_find_format(bs
->backing_format
);
915 /* backing files always opened read-only */
916 back_flags
= bs
->open_flags
& ~(BDRV_O_RDWR
| BDRV_O_SNAPSHOT
);
918 ret
= bdrv_open(bs
->backing_hd
,
919 *backing_filename
? backing_filename
: NULL
, options
,
920 back_flags
, back_drv
);
922 bdrv_delete(bs
->backing_hd
);
923 bs
->backing_hd
= NULL
;
924 bs
->open_flags
|= BDRV_O_NO_BACKING
;
930 static void extract_subqdict(QDict
*src
, QDict
**dst
, const char *start
)
932 const QDictEntry
*entry
, *next
;
936 entry
= qdict_first(src
);
938 while (entry
!= NULL
) {
939 next
= qdict_next(src
, entry
);
940 if (strstart(entry
->key
, start
, &p
)) {
941 qobject_incref(entry
->value
);
942 qdict_put_obj(*dst
, p
, entry
->value
);
943 qdict_del(src
, entry
->key
);
950 * Opens a disk image (raw, qcow2, vmdk, ...)
952 * options is a QDict of options to pass to the block drivers, or NULL for an
953 * empty set of options. The reference to the QDict belongs to the block layer
954 * after the call (even on failure), so if the caller intends to reuse the
955 * dictionary, it needs to use QINCREF() before calling bdrv_open.
957 int bdrv_open(BlockDriverState
*bs
, const char *filename
, QDict
*options
,
958 int flags
, BlockDriver
*drv
)
961 /* TODO: extra byte is a hack to ensure MAX_PATH space on Windows. */
962 char tmp_filename
[PATH_MAX
+ 1];
963 BlockDriverState
*file
= NULL
;
964 QDict
*file_options
= NULL
;
966 /* NULL means an empty set of options */
967 if (options
== NULL
) {
968 options
= qdict_new();
971 bs
->options
= options
;
972 options
= qdict_clone_shallow(options
);
974 /* For snapshot=on, create a temporary qcow2 overlay */
975 if (flags
& BDRV_O_SNAPSHOT
) {
976 BlockDriverState
*bs1
;
978 BlockDriver
*bdrv_qcow2
;
979 QEMUOptionParameter
*create_options
;
980 char backing_filename
[PATH_MAX
];
982 if (qdict_size(options
) != 0) {
983 error_report("Can't use snapshot=on with driver-specific options");
987 assert(filename
!= NULL
);
989 /* if snapshot, we create a temporary backing file and open it
990 instead of opening 'filename' directly */
992 /* if there is a backing file, use it */
994 ret
= bdrv_open(bs1
, filename
, NULL
, 0, drv
);
999 total_size
= bdrv_getlength(bs1
) & BDRV_SECTOR_MASK
;
1003 ret
= get_tmp_filename(tmp_filename
, sizeof(tmp_filename
));
1008 /* Real path is meaningless for protocols */
1009 if (path_has_protocol(filename
)) {
1010 snprintf(backing_filename
, sizeof(backing_filename
),
1012 } else if (!realpath(filename
, backing_filename
)) {
1017 bdrv_qcow2
= bdrv_find_format("qcow2");
1018 create_options
= parse_option_parameters("", bdrv_qcow2
->create_options
,
1021 set_option_parameter_int(create_options
, BLOCK_OPT_SIZE
, total_size
);
1022 set_option_parameter(create_options
, BLOCK_OPT_BACKING_FILE
,
1025 set_option_parameter(create_options
, BLOCK_OPT_BACKING_FMT
,
1029 ret
= bdrv_create(bdrv_qcow2
, tmp_filename
, create_options
);
1030 free_option_parameters(create_options
);
1035 filename
= tmp_filename
;
1037 bs
->is_temporary
= 1;
1040 /* Open image file without format layer */
1041 if (flags
& BDRV_O_RDWR
) {
1042 flags
|= BDRV_O_ALLOW_RDWR
;
1045 extract_subqdict(options
, &file_options
, "file.");
1047 ret
= bdrv_file_open(&file
, filename
, file_options
,
1048 bdrv_open_flags(bs
, flags
));
1053 /* Find the right image format driver */
1055 ret
= find_image_format(file
, filename
, &drv
);
1059 goto unlink_and_fail
;
1062 /* Open the image */
1063 ret
= bdrv_open_common(bs
, file
, options
, flags
, drv
);
1065 goto unlink_and_fail
;
1068 if (bs
->file
!= file
) {
1073 /* If there is a backing file, use it */
1074 if ((flags
& BDRV_O_NO_BACKING
) == 0) {
1075 QDict
*backing_options
;
1077 extract_subqdict(options
, &backing_options
, "backing.");
1078 ret
= bdrv_open_backing_file(bs
, backing_options
);
1080 goto close_and_fail
;
1084 /* Check if any unknown options were used */
1085 if (qdict_size(options
) != 0) {
1086 const QDictEntry
*entry
= qdict_first(options
);
1087 qerror_report(ERROR_CLASS_GENERIC_ERROR
, "Block format '%s' used by "
1088 "device '%s' doesn't support the option '%s'",
1089 drv
->format_name
, bs
->device_name
, entry
->key
);
1092 goto close_and_fail
;
1096 if (!bdrv_key_required(bs
)) {
1097 bdrv_dev_change_media_cb(bs
, true);
1100 /* throttling disk I/O limits */
1101 if (bs
->io_limits_enabled
) {
1102 bdrv_io_limits_enable(bs
);
1111 if (bs
->is_temporary
) {
1115 QDECREF(bs
->options
);
1126 typedef struct BlockReopenQueueEntry
{
1128 BDRVReopenState state
;
1129 QSIMPLEQ_ENTRY(BlockReopenQueueEntry
) entry
;
1130 } BlockReopenQueueEntry
;
1133 * Adds a BlockDriverState to a simple queue for an atomic, transactional
1134 * reopen of multiple devices.
1136 * bs_queue can either be an existing BlockReopenQueue that has had QSIMPLE_INIT
1137 * already performed, or alternatively may be NULL a new BlockReopenQueue will
1138 * be created and initialized. This newly created BlockReopenQueue should be
1139 * passed back in for subsequent calls that are intended to be of the same
1142 * bs is the BlockDriverState to add to the reopen queue.
1144 * flags contains the open flags for the associated bs
1146 * returns a pointer to bs_queue, which is either the newly allocated
1147 * bs_queue, or the existing bs_queue being used.
1150 BlockReopenQueue
*bdrv_reopen_queue(BlockReopenQueue
*bs_queue
,
1151 BlockDriverState
*bs
, int flags
)
1155 BlockReopenQueueEntry
*bs_entry
;
1156 if (bs_queue
== NULL
) {
1157 bs_queue
= g_new0(BlockReopenQueue
, 1);
1158 QSIMPLEQ_INIT(bs_queue
);
1162 bdrv_reopen_queue(bs_queue
, bs
->file
, flags
);
1165 bs_entry
= g_new0(BlockReopenQueueEntry
, 1);
1166 QSIMPLEQ_INSERT_TAIL(bs_queue
, bs_entry
, entry
);
1168 bs_entry
->state
.bs
= bs
;
1169 bs_entry
->state
.flags
= flags
;
1175 * Reopen multiple BlockDriverStates atomically & transactionally.
1177 * The queue passed in (bs_queue) must have been built up previous
1178 * via bdrv_reopen_queue().
1180 * Reopens all BDS specified in the queue, with the appropriate
1181 * flags. All devices are prepared for reopen, and failure of any
1182 * device will cause all device changes to be abandonded, and intermediate
1185 * If all devices prepare successfully, then the changes are committed
1189 int bdrv_reopen_multiple(BlockReopenQueue
*bs_queue
, Error
**errp
)
1192 BlockReopenQueueEntry
*bs_entry
, *next
;
1193 Error
*local_err
= NULL
;
1195 assert(bs_queue
!= NULL
);
1199 QSIMPLEQ_FOREACH(bs_entry
, bs_queue
, entry
) {
1200 if (bdrv_reopen_prepare(&bs_entry
->state
, bs_queue
, &local_err
)) {
1201 error_propagate(errp
, local_err
);
1204 bs_entry
->prepared
= true;
1207 /* If we reach this point, we have success and just need to apply the
1210 QSIMPLEQ_FOREACH(bs_entry
, bs_queue
, entry
) {
1211 bdrv_reopen_commit(&bs_entry
->state
);
1217 QSIMPLEQ_FOREACH_SAFE(bs_entry
, bs_queue
, entry
, next
) {
1218 if (ret
&& bs_entry
->prepared
) {
1219 bdrv_reopen_abort(&bs_entry
->state
);
1228 /* Reopen a single BlockDriverState with the specified flags. */
1229 int bdrv_reopen(BlockDriverState
*bs
, int bdrv_flags
, Error
**errp
)
1232 Error
*local_err
= NULL
;
1233 BlockReopenQueue
*queue
= bdrv_reopen_queue(NULL
, bs
, bdrv_flags
);
1235 ret
= bdrv_reopen_multiple(queue
, &local_err
);
1236 if (local_err
!= NULL
) {
1237 error_propagate(errp
, local_err
);
1244 * Prepares a BlockDriverState for reopen. All changes are staged in the
1245 * 'opaque' field of the BDRVReopenState, which is used and allocated by
1246 * the block driver layer .bdrv_reopen_prepare()
1248 * bs is the BlockDriverState to reopen
1249 * flags are the new open flags
1250 * queue is the reopen queue
1252 * Returns 0 on success, non-zero on error. On error errp will be set
1255 * On failure, bdrv_reopen_abort() will be called to clean up any data.
1256 * It is the responsibility of the caller to then call the abort() or
1257 * commit() for any other BDS that have been left in a prepare() state
1260 int bdrv_reopen_prepare(BDRVReopenState
*reopen_state
, BlockReopenQueue
*queue
,
1264 Error
*local_err
= NULL
;
1267 assert(reopen_state
!= NULL
);
1268 assert(reopen_state
->bs
->drv
!= NULL
);
1269 drv
= reopen_state
->bs
->drv
;
1271 /* if we are to stay read-only, do not allow permission change
1273 if (!(reopen_state
->bs
->open_flags
& BDRV_O_ALLOW_RDWR
) &&
1274 reopen_state
->flags
& BDRV_O_RDWR
) {
1275 error_set(errp
, QERR_DEVICE_IS_READ_ONLY
,
1276 reopen_state
->bs
->device_name
);
1281 ret
= bdrv_flush(reopen_state
->bs
);
1283 error_set(errp
, ERROR_CLASS_GENERIC_ERROR
, "Error (%s) flushing drive",
1288 if (drv
->bdrv_reopen_prepare
) {
1289 ret
= drv
->bdrv_reopen_prepare(reopen_state
, queue
, &local_err
);
1291 if (local_err
!= NULL
) {
1292 error_propagate(errp
, local_err
);
1294 error_set(errp
, QERR_OPEN_FILE_FAILED
,
1295 reopen_state
->bs
->filename
);
1300 /* It is currently mandatory to have a bdrv_reopen_prepare()
1301 * handler for each supported drv. */
1302 error_set(errp
, QERR_BLOCK_FORMAT_FEATURE_NOT_SUPPORTED
,
1303 drv
->format_name
, reopen_state
->bs
->device_name
,
1304 "reopening of file");
1316 * Takes the staged changes for the reopen from bdrv_reopen_prepare(), and
1317 * makes them final by swapping the staging BlockDriverState contents into
1318 * the active BlockDriverState contents.
1320 void bdrv_reopen_commit(BDRVReopenState
*reopen_state
)
1324 assert(reopen_state
!= NULL
);
1325 drv
= reopen_state
->bs
->drv
;
1326 assert(drv
!= NULL
);
1328 /* If there are any driver level actions to take */
1329 if (drv
->bdrv_reopen_commit
) {
1330 drv
->bdrv_reopen_commit(reopen_state
);
1333 /* set BDS specific flags now */
1334 reopen_state
->bs
->open_flags
= reopen_state
->flags
;
1335 reopen_state
->bs
->enable_write_cache
= !!(reopen_state
->flags
&
1337 reopen_state
->bs
->read_only
= !(reopen_state
->flags
& BDRV_O_RDWR
);
1341 * Abort the reopen, and delete and free the staged changes in
1344 void bdrv_reopen_abort(BDRVReopenState
*reopen_state
)
1348 assert(reopen_state
!= NULL
);
1349 drv
= reopen_state
->bs
->drv
;
1350 assert(drv
!= NULL
);
1352 if (drv
->bdrv_reopen_abort
) {
1353 drv
->bdrv_reopen_abort(reopen_state
);
1358 void bdrv_close(BlockDriverState
*bs
)
1362 block_job_cancel_sync(bs
->job
);
1365 notifier_list_notify(&bs
->close_notifiers
, bs
);
1368 if (bs
->backing_hd
) {
1369 bdrv_delete(bs
->backing_hd
);
1370 bs
->backing_hd
= NULL
;
1372 bs
->drv
->bdrv_close(bs
);
1375 if (bs
->is_temporary
) {
1376 unlink(bs
->filename
);
1381 bs
->copy_on_read
= 0;
1382 bs
->backing_file
[0] = '\0';
1383 bs
->backing_format
[0] = '\0';
1384 bs
->total_sectors
= 0;
1389 QDECREF(bs
->options
);
1392 if (bs
->file
!= NULL
) {
1393 bdrv_delete(bs
->file
);
1398 bdrv_dev_change_media_cb(bs
, false);
1400 /*throttling disk I/O limits*/
1401 if (bs
->io_limits_enabled
) {
1402 bdrv_io_limits_disable(bs
);
1406 void bdrv_close_all(void)
1408 BlockDriverState
*bs
;
1410 QTAILQ_FOREACH(bs
, &bdrv_states
, list
) {
1416 * Wait for pending requests to complete across all BlockDriverStates
1418 * This function does not flush data to disk, use bdrv_flush_all() for that
1419 * after calling this function.
1421 * Note that completion of an asynchronous I/O operation can trigger any
1422 * number of other I/O operations on other devices---for example a coroutine
1423 * can be arbitrarily complex and a constant flow of I/O can come until the
1424 * coroutine is complete. Because of this, it is not possible to have a
1425 * function to drain a single device's I/O queue.
1427 void bdrv_drain_all(void)
1429 BlockDriverState
*bs
;
1433 busy
= qemu_aio_wait();
1435 /* FIXME: We do not have timer support here, so this is effectively
1438 QTAILQ_FOREACH(bs
, &bdrv_states
, list
) {
1439 if (!qemu_co_queue_empty(&bs
->throttled_reqs
)) {
1440 qemu_co_queue_restart_all(&bs
->throttled_reqs
);
1446 /* If requests are still pending there is a bug somewhere */
1447 QTAILQ_FOREACH(bs
, &bdrv_states
, list
) {
1448 assert(QLIST_EMPTY(&bs
->tracked_requests
));
1449 assert(qemu_co_queue_empty(&bs
->throttled_reqs
));
1453 /* make a BlockDriverState anonymous by removing from bdrv_state list.
1454 Also, NULL terminate the device_name to prevent double remove */
1455 void bdrv_make_anon(BlockDriverState
*bs
)
1457 if (bs
->device_name
[0] != '\0') {
1458 QTAILQ_REMOVE(&bdrv_states
, bs
, list
);
1460 bs
->device_name
[0] = '\0';
1463 static void bdrv_rebind(BlockDriverState
*bs
)
1465 if (bs
->drv
&& bs
->drv
->bdrv_rebind
) {
1466 bs
->drv
->bdrv_rebind(bs
);
1470 static void bdrv_move_feature_fields(BlockDriverState
*bs_dest
,
1471 BlockDriverState
*bs_src
)
1473 /* move some fields that need to stay attached to the device */
1474 bs_dest
->open_flags
= bs_src
->open_flags
;
1477 bs_dest
->dev_ops
= bs_src
->dev_ops
;
1478 bs_dest
->dev_opaque
= bs_src
->dev_opaque
;
1479 bs_dest
->dev
= bs_src
->dev
;
1480 bs_dest
->buffer_alignment
= bs_src
->buffer_alignment
;
1481 bs_dest
->copy_on_read
= bs_src
->copy_on_read
;
1483 bs_dest
->enable_write_cache
= bs_src
->enable_write_cache
;
1485 /* i/o timing parameters */
1486 bs_dest
->slice_start
= bs_src
->slice_start
;
1487 bs_dest
->slice_end
= bs_src
->slice_end
;
1488 bs_dest
->slice_submitted
= bs_src
->slice_submitted
;
1489 bs_dest
->io_limits
= bs_src
->io_limits
;
1490 bs_dest
->throttled_reqs
= bs_src
->throttled_reqs
;
1491 bs_dest
->block_timer
= bs_src
->block_timer
;
1492 bs_dest
->io_limits_enabled
= bs_src
->io_limits_enabled
;
1495 bs_dest
->on_read_error
= bs_src
->on_read_error
;
1496 bs_dest
->on_write_error
= bs_src
->on_write_error
;
1499 bs_dest
->iostatus_enabled
= bs_src
->iostatus_enabled
;
1500 bs_dest
->iostatus
= bs_src
->iostatus
;
1503 bs_dest
->dirty_bitmap
= bs_src
->dirty_bitmap
;
1506 bs_dest
->in_use
= bs_src
->in_use
;
1507 bs_dest
->job
= bs_src
->job
;
1509 /* keep the same entry in bdrv_states */
1510 pstrcpy(bs_dest
->device_name
, sizeof(bs_dest
->device_name
),
1511 bs_src
->device_name
);
1512 bs_dest
->list
= bs_src
->list
;
1516 * Swap bs contents for two image chains while they are live,
1517 * while keeping required fields on the BlockDriverState that is
1518 * actually attached to a device.
1520 * This will modify the BlockDriverState fields, and swap contents
1521 * between bs_new and bs_old. Both bs_new and bs_old are modified.
1523 * bs_new is required to be anonymous.
1525 * This function does not create any image files.
1527 void bdrv_swap(BlockDriverState
*bs_new
, BlockDriverState
*bs_old
)
1529 BlockDriverState tmp
;
1531 /* bs_new must be anonymous and shouldn't have anything fancy enabled */
1532 assert(bs_new
->device_name
[0] == '\0');
1533 assert(bs_new
->dirty_bitmap
== NULL
);
1534 assert(bs_new
->job
== NULL
);
1535 assert(bs_new
->dev
== NULL
);
1536 assert(bs_new
->in_use
== 0);
1537 assert(bs_new
->io_limits_enabled
== false);
1538 assert(bs_new
->block_timer
== NULL
);
1544 /* there are some fields that should not be swapped, move them back */
1545 bdrv_move_feature_fields(&tmp
, bs_old
);
1546 bdrv_move_feature_fields(bs_old
, bs_new
);
1547 bdrv_move_feature_fields(bs_new
, &tmp
);
1549 /* bs_new shouldn't be in bdrv_states even after the swap! */
1550 assert(bs_new
->device_name
[0] == '\0');
1552 /* Check a few fields that should remain attached to the device */
1553 assert(bs_new
->dev
== NULL
);
1554 assert(bs_new
->job
== NULL
);
1555 assert(bs_new
->in_use
== 0);
1556 assert(bs_new
->io_limits_enabled
== false);
1557 assert(bs_new
->block_timer
== NULL
);
1559 bdrv_rebind(bs_new
);
1560 bdrv_rebind(bs_old
);
1564 * Add new bs contents at the top of an image chain while the chain is
1565 * live, while keeping required fields on the top layer.
1567 * This will modify the BlockDriverState fields, and swap contents
1568 * between bs_new and bs_top. Both bs_new and bs_top are modified.
1570 * bs_new is required to be anonymous.
1572 * This function does not create any image files.
1574 void bdrv_append(BlockDriverState
*bs_new
, BlockDriverState
*bs_top
)
1576 bdrv_swap(bs_new
, bs_top
);
1578 /* The contents of 'tmp' will become bs_top, as we are
1579 * swapping bs_new and bs_top contents. */
1580 bs_top
->backing_hd
= bs_new
;
1581 bs_top
->open_flags
&= ~BDRV_O_NO_BACKING
;
1582 pstrcpy(bs_top
->backing_file
, sizeof(bs_top
->backing_file
),
1584 pstrcpy(bs_top
->backing_format
, sizeof(bs_top
->backing_format
),
1585 bs_new
->drv
? bs_new
->drv
->format_name
: "");
1588 void bdrv_delete(BlockDriverState
*bs
)
1592 assert(!bs
->in_use
);
1594 /* remove from list, if necessary */
1602 int bdrv_attach_dev(BlockDriverState
*bs
, void *dev
)
1603 /* TODO change to DeviceState *dev when all users are qdevified */
1609 bdrv_iostatus_reset(bs
);
1613 /* TODO qdevified devices don't use this, remove when devices are qdevified */
1614 void bdrv_attach_dev_nofail(BlockDriverState
*bs
, void *dev
)
1616 if (bdrv_attach_dev(bs
, dev
) < 0) {
1621 void bdrv_detach_dev(BlockDriverState
*bs
, void *dev
)
1622 /* TODO change to DeviceState *dev when all users are qdevified */
1624 assert(bs
->dev
== dev
);
1627 bs
->dev_opaque
= NULL
;
1628 bs
->buffer_alignment
= 512;
1631 /* TODO change to return DeviceState * when all users are qdevified */
1632 void *bdrv_get_attached_dev(BlockDriverState
*bs
)
1637 void bdrv_set_dev_ops(BlockDriverState
*bs
, const BlockDevOps
*ops
,
1641 bs
->dev_opaque
= opaque
;
1644 void bdrv_emit_qmp_error_event(const BlockDriverState
*bdrv
,
1645 enum MonitorEvent ev
,
1646 BlockErrorAction action
, bool is_read
)
1649 const char *action_str
;
1652 case BDRV_ACTION_REPORT
:
1653 action_str
= "report";
1655 case BDRV_ACTION_IGNORE
:
1656 action_str
= "ignore";
1658 case BDRV_ACTION_STOP
:
1659 action_str
= "stop";
1665 data
= qobject_from_jsonf("{ 'device': %s, 'action': %s, 'operation': %s }",
1668 is_read
? "read" : "write");
1669 monitor_protocol_event(ev
, data
);
1671 qobject_decref(data
);
1674 static void bdrv_emit_qmp_eject_event(BlockDriverState
*bs
, bool ejected
)
1678 data
= qobject_from_jsonf("{ 'device': %s, 'tray-open': %i }",
1679 bdrv_get_device_name(bs
), ejected
);
1680 monitor_protocol_event(QEVENT_DEVICE_TRAY_MOVED
, data
);
1682 qobject_decref(data
);
1685 static void bdrv_dev_change_media_cb(BlockDriverState
*bs
, bool load
)
1687 if (bs
->dev_ops
&& bs
->dev_ops
->change_media_cb
) {
1688 bool tray_was_closed
= !bdrv_dev_is_tray_open(bs
);
1689 bs
->dev_ops
->change_media_cb(bs
->dev_opaque
, load
);
1690 if (tray_was_closed
) {
1692 bdrv_emit_qmp_eject_event(bs
, true);
1696 bdrv_emit_qmp_eject_event(bs
, false);
1701 bool bdrv_dev_has_removable_media(BlockDriverState
*bs
)
1703 return !bs
->dev
|| (bs
->dev_ops
&& bs
->dev_ops
->change_media_cb
);
1706 void bdrv_dev_eject_request(BlockDriverState
*bs
, bool force
)
1708 if (bs
->dev_ops
&& bs
->dev_ops
->eject_request_cb
) {
1709 bs
->dev_ops
->eject_request_cb(bs
->dev_opaque
, force
);
1713 bool bdrv_dev_is_tray_open(BlockDriverState
*bs
)
1715 if (bs
->dev_ops
&& bs
->dev_ops
->is_tray_open
) {
1716 return bs
->dev_ops
->is_tray_open(bs
->dev_opaque
);
1721 static void bdrv_dev_resize_cb(BlockDriverState
*bs
)
1723 if (bs
->dev_ops
&& bs
->dev_ops
->resize_cb
) {
1724 bs
->dev_ops
->resize_cb(bs
->dev_opaque
);
1728 bool bdrv_dev_is_medium_locked(BlockDriverState
*bs
)
1730 if (bs
->dev_ops
&& bs
->dev_ops
->is_medium_locked
) {
1731 return bs
->dev_ops
->is_medium_locked(bs
->dev_opaque
);
1737 * Run consistency checks on an image
1739 * Returns 0 if the check could be completed (it doesn't mean that the image is
1740 * free of errors) or -errno when an internal error occurred. The results of the
1741 * check are stored in res.
1743 int bdrv_check(BlockDriverState
*bs
, BdrvCheckResult
*res
, BdrvCheckMode fix
)
1745 if (bs
->drv
->bdrv_check
== NULL
) {
1749 memset(res
, 0, sizeof(*res
));
1750 return bs
->drv
->bdrv_check(bs
, res
, fix
);
1753 #define COMMIT_BUF_SECTORS 2048
1755 /* commit COW file into the raw image */
1756 int bdrv_commit(BlockDriverState
*bs
)
1758 BlockDriver
*drv
= bs
->drv
;
1759 int64_t sector
, total_sectors
;
1760 int n
, ro
, open_flags
;
1763 char filename
[PATH_MAX
];
1768 if (!bs
->backing_hd
) {
1772 if (bdrv_in_use(bs
) || bdrv_in_use(bs
->backing_hd
)) {
1776 ro
= bs
->backing_hd
->read_only
;
1777 /* Use pstrcpy (not strncpy): filename must be NUL-terminated. */
1778 pstrcpy(filename
, sizeof(filename
), bs
->backing_hd
->filename
);
1779 open_flags
= bs
->backing_hd
->open_flags
;
1782 if (bdrv_reopen(bs
->backing_hd
, open_flags
| BDRV_O_RDWR
, NULL
)) {
1787 total_sectors
= bdrv_getlength(bs
) >> BDRV_SECTOR_BITS
;
1788 buf
= g_malloc(COMMIT_BUF_SECTORS
* BDRV_SECTOR_SIZE
);
1790 for (sector
= 0; sector
< total_sectors
; sector
+= n
) {
1791 if (bdrv_is_allocated(bs
, sector
, COMMIT_BUF_SECTORS
, &n
)) {
1793 if (bdrv_read(bs
, sector
, buf
, n
) != 0) {
1798 if (bdrv_write(bs
->backing_hd
, sector
, buf
, n
) != 0) {
1805 if (drv
->bdrv_make_empty
) {
1806 ret
= drv
->bdrv_make_empty(bs
);
1811 * Make sure all data we wrote to the backing device is actually
1815 bdrv_flush(bs
->backing_hd
);
1821 /* ignoring error return here */
1822 bdrv_reopen(bs
->backing_hd
, open_flags
& ~BDRV_O_RDWR
, NULL
);
1828 int bdrv_commit_all(void)
1830 BlockDriverState
*bs
;
1832 QTAILQ_FOREACH(bs
, &bdrv_states
, list
) {
1833 if (bs
->drv
&& bs
->backing_hd
) {
1834 int ret
= bdrv_commit(bs
);
1843 struct BdrvTrackedRequest
{
1844 BlockDriverState
*bs
;
1848 QLIST_ENTRY(BdrvTrackedRequest
) list
;
1849 Coroutine
*co
; /* owner, used for deadlock detection */
1850 CoQueue wait_queue
; /* coroutines blocked on this request */
1854 * Remove an active request from the tracked requests list
1856 * This function should be called when a tracked request is completing.
1858 static void tracked_request_end(BdrvTrackedRequest
*req
)
1860 QLIST_REMOVE(req
, list
);
1861 qemu_co_queue_restart_all(&req
->wait_queue
);
1865 * Add an active request to the tracked requests list
1867 static void tracked_request_begin(BdrvTrackedRequest
*req
,
1868 BlockDriverState
*bs
,
1870 int nb_sectors
, bool is_write
)
1872 *req
= (BdrvTrackedRequest
){
1874 .sector_num
= sector_num
,
1875 .nb_sectors
= nb_sectors
,
1876 .is_write
= is_write
,
1877 .co
= qemu_coroutine_self(),
1880 qemu_co_queue_init(&req
->wait_queue
);
1882 QLIST_INSERT_HEAD(&bs
->tracked_requests
, req
, list
);
1886 * Round a region to cluster boundaries
1888 void bdrv_round_to_clusters(BlockDriverState
*bs
,
1889 int64_t sector_num
, int nb_sectors
,
1890 int64_t *cluster_sector_num
,
1891 int *cluster_nb_sectors
)
1893 BlockDriverInfo bdi
;
1895 if (bdrv_get_info(bs
, &bdi
) < 0 || bdi
.cluster_size
== 0) {
1896 *cluster_sector_num
= sector_num
;
1897 *cluster_nb_sectors
= nb_sectors
;
1899 int64_t c
= bdi
.cluster_size
/ BDRV_SECTOR_SIZE
;
1900 *cluster_sector_num
= QEMU_ALIGN_DOWN(sector_num
, c
);
1901 *cluster_nb_sectors
= QEMU_ALIGN_UP(sector_num
- *cluster_sector_num
+
1906 static bool tracked_request_overlaps(BdrvTrackedRequest
*req
,
1907 int64_t sector_num
, int nb_sectors
) {
1909 if (sector_num
>= req
->sector_num
+ req
->nb_sectors
) {
1913 if (req
->sector_num
>= sector_num
+ nb_sectors
) {
1919 static void coroutine_fn
wait_for_overlapping_requests(BlockDriverState
*bs
,
1920 int64_t sector_num
, int nb_sectors
)
1922 BdrvTrackedRequest
*req
;
1923 int64_t cluster_sector_num
;
1924 int cluster_nb_sectors
;
1927 /* If we touch the same cluster it counts as an overlap. This guarantees
1928 * that allocating writes will be serialized and not race with each other
1929 * for the same cluster. For example, in copy-on-read it ensures that the
1930 * CoR read and write operations are atomic and guest writes cannot
1931 * interleave between them.
1933 bdrv_round_to_clusters(bs
, sector_num
, nb_sectors
,
1934 &cluster_sector_num
, &cluster_nb_sectors
);
1938 QLIST_FOREACH(req
, &bs
->tracked_requests
, list
) {
1939 if (tracked_request_overlaps(req
, cluster_sector_num
,
1940 cluster_nb_sectors
)) {
1941 /* Hitting this means there was a reentrant request, for
1942 * example, a block driver issuing nested requests. This must
1943 * never happen since it means deadlock.
1945 assert(qemu_coroutine_self() != req
->co
);
1947 qemu_co_queue_wait(&req
->wait_queue
);
1958 * -EINVAL - backing format specified, but no file
1959 * -ENOSPC - can't update the backing file because no space is left in the
1961 * -ENOTSUP - format driver doesn't support changing the backing file
1963 int bdrv_change_backing_file(BlockDriverState
*bs
,
1964 const char *backing_file
, const char *backing_fmt
)
1966 BlockDriver
*drv
= bs
->drv
;
1969 /* Backing file format doesn't make sense without a backing file */
1970 if (backing_fmt
&& !backing_file
) {
1974 if (drv
->bdrv_change_backing_file
!= NULL
) {
1975 ret
= drv
->bdrv_change_backing_file(bs
, backing_file
, backing_fmt
);
1981 pstrcpy(bs
->backing_file
, sizeof(bs
->backing_file
), backing_file
?: "");
1982 pstrcpy(bs
->backing_format
, sizeof(bs
->backing_format
), backing_fmt
?: "");
1988 * Finds the image layer in the chain that has 'bs' as its backing file.
1990 * active is the current topmost image.
1992 * Returns NULL if bs is not found in active's image chain,
1993 * or if active == bs.
1995 BlockDriverState
*bdrv_find_overlay(BlockDriverState
*active
,
1996 BlockDriverState
*bs
)
1998 BlockDriverState
*overlay
= NULL
;
1999 BlockDriverState
*intermediate
;
2001 assert(active
!= NULL
);
2004 /* if bs is the same as active, then by definition it has no overlay
2010 intermediate
= active
;
2011 while (intermediate
->backing_hd
) {
2012 if (intermediate
->backing_hd
== bs
) {
2013 overlay
= intermediate
;
2016 intermediate
= intermediate
->backing_hd
;
2022 typedef struct BlkIntermediateStates
{
2023 BlockDriverState
*bs
;
2024 QSIMPLEQ_ENTRY(BlkIntermediateStates
) entry
;
2025 } BlkIntermediateStates
;
2029 * Drops images above 'base' up to and including 'top', and sets the image
2030 * above 'top' to have base as its backing file.
2032 * Requires that the overlay to 'top' is opened r/w, so that the backing file
2033 * information in 'bs' can be properly updated.
2035 * E.g., this will convert the following chain:
2036 * bottom <- base <- intermediate <- top <- active
2040 * bottom <- base <- active
2042 * It is allowed for bottom==base, in which case it converts:
2044 * base <- intermediate <- top <- active
2051 * if active == top, that is considered an error
2054 int bdrv_drop_intermediate(BlockDriverState
*active
, BlockDriverState
*top
,
2055 BlockDriverState
*base
)
2057 BlockDriverState
*intermediate
;
2058 BlockDriverState
*base_bs
= NULL
;
2059 BlockDriverState
*new_top_bs
= NULL
;
2060 BlkIntermediateStates
*intermediate_state
, *next
;
2063 QSIMPLEQ_HEAD(states_to_delete
, BlkIntermediateStates
) states_to_delete
;
2064 QSIMPLEQ_INIT(&states_to_delete
);
2066 if (!top
->drv
|| !base
->drv
) {
2070 new_top_bs
= bdrv_find_overlay(active
, top
);
2072 if (new_top_bs
== NULL
) {
2073 /* we could not find the image above 'top', this is an error */
2077 /* special case of new_top_bs->backing_hd already pointing to base - nothing
2078 * to do, no intermediate images */
2079 if (new_top_bs
->backing_hd
== base
) {
2086 /* now we will go down through the list, and add each BDS we find
2087 * into our deletion queue, until we hit the 'base'
2089 while (intermediate
) {
2090 intermediate_state
= g_malloc0(sizeof(BlkIntermediateStates
));
2091 intermediate_state
->bs
= intermediate
;
2092 QSIMPLEQ_INSERT_TAIL(&states_to_delete
, intermediate_state
, entry
);
2094 if (intermediate
->backing_hd
== base
) {
2095 base_bs
= intermediate
->backing_hd
;
2098 intermediate
= intermediate
->backing_hd
;
2100 if (base_bs
== NULL
) {
2101 /* something went wrong, we did not end at the base. safely
2102 * unravel everything, and exit with error */
2106 /* success - we can delete the intermediate states, and link top->base */
2107 ret
= bdrv_change_backing_file(new_top_bs
, base_bs
->filename
,
2108 base_bs
->drv
? base_bs
->drv
->format_name
: "");
2112 new_top_bs
->backing_hd
= base_bs
;
2115 QSIMPLEQ_FOREACH_SAFE(intermediate_state
, &states_to_delete
, entry
, next
) {
2116 /* so that bdrv_close() does not recursively close the chain */
2117 intermediate_state
->bs
->backing_hd
= NULL
;
2118 bdrv_delete(intermediate_state
->bs
);
2123 QSIMPLEQ_FOREACH_SAFE(intermediate_state
, &states_to_delete
, entry
, next
) {
2124 g_free(intermediate_state
);
2130 static int bdrv_check_byte_request(BlockDriverState
*bs
, int64_t offset
,
2135 if (!bdrv_is_inserted(bs
))
2141 len
= bdrv_getlength(bs
);
2146 if ((offset
> len
) || (len
- offset
< size
))
2152 static int bdrv_check_request(BlockDriverState
*bs
, int64_t sector_num
,
2155 return bdrv_check_byte_request(bs
, sector_num
* BDRV_SECTOR_SIZE
,
2156 nb_sectors
* BDRV_SECTOR_SIZE
);
2159 typedef struct RwCo
{
2160 BlockDriverState
*bs
;
2168 static void coroutine_fn
bdrv_rw_co_entry(void *opaque
)
2170 RwCo
*rwco
= opaque
;
2172 if (!rwco
->is_write
) {
2173 rwco
->ret
= bdrv_co_do_readv(rwco
->bs
, rwco
->sector_num
,
2174 rwco
->nb_sectors
, rwco
->qiov
, 0);
2176 rwco
->ret
= bdrv_co_do_writev(rwco
->bs
, rwco
->sector_num
,
2177 rwco
->nb_sectors
, rwco
->qiov
, 0);
2182 * Process a vectored synchronous request using coroutines
2184 static int bdrv_rwv_co(BlockDriverState
*bs
, int64_t sector_num
,
2185 QEMUIOVector
*qiov
, bool is_write
)
2190 .sector_num
= sector_num
,
2191 .nb_sectors
= qiov
->size
>> BDRV_SECTOR_BITS
,
2193 .is_write
= is_write
,
2196 assert((qiov
->size
& (BDRV_SECTOR_SIZE
- 1)) == 0);
2199 * In sync call context, when the vcpu is blocked, this throttling timer
2200 * will not fire; so the I/O throttling function has to be disabled here
2201 * if it has been enabled.
2203 if (bs
->io_limits_enabled
) {
2204 fprintf(stderr
, "Disabling I/O throttling on '%s' due "
2205 "to synchronous I/O.\n", bdrv_get_device_name(bs
));
2206 bdrv_io_limits_disable(bs
);
2209 if (qemu_in_coroutine()) {
2210 /* Fast-path if already in coroutine context */
2211 bdrv_rw_co_entry(&rwco
);
2213 co
= qemu_coroutine_create(bdrv_rw_co_entry
);
2214 qemu_coroutine_enter(co
, &rwco
);
2215 while (rwco
.ret
== NOT_DONE
) {
2223 * Process a synchronous request using coroutines
2225 static int bdrv_rw_co(BlockDriverState
*bs
, int64_t sector_num
, uint8_t *buf
,
2226 int nb_sectors
, bool is_write
)
2229 struct iovec iov
= {
2230 .iov_base
= (void *)buf
,
2231 .iov_len
= nb_sectors
* BDRV_SECTOR_SIZE
,
2234 qemu_iovec_init_external(&qiov
, &iov
, 1);
2235 return bdrv_rwv_co(bs
, sector_num
, &qiov
, is_write
);
2238 /* return < 0 if error. See bdrv_write() for the return codes */
2239 int bdrv_read(BlockDriverState
*bs
, int64_t sector_num
,
2240 uint8_t *buf
, int nb_sectors
)
2242 return bdrv_rw_co(bs
, sector_num
, buf
, nb_sectors
, false);
2245 /* Just like bdrv_read(), but with I/O throttling temporarily disabled */
2246 int bdrv_read_unthrottled(BlockDriverState
*bs
, int64_t sector_num
,
2247 uint8_t *buf
, int nb_sectors
)
2252 enabled
= bs
->io_limits_enabled
;
2253 bs
->io_limits_enabled
= false;
2254 ret
= bdrv_read(bs
, 0, buf
, 1);
2255 bs
->io_limits_enabled
= enabled
;
2259 /* Return < 0 if error. Important errors are:
2260 -EIO generic I/O error (may happen for all errors)
2261 -ENOMEDIUM No media inserted.
2262 -EINVAL Invalid sector number or nb_sectors
2263 -EACCES Trying to write a read-only device
2265 int bdrv_write(BlockDriverState
*bs
, int64_t sector_num
,
2266 const uint8_t *buf
, int nb_sectors
)
2268 return bdrv_rw_co(bs
, sector_num
, (uint8_t *)buf
, nb_sectors
, true);
2271 int bdrv_writev(BlockDriverState
*bs
, int64_t sector_num
, QEMUIOVector
*qiov
)
2273 return bdrv_rwv_co(bs
, sector_num
, qiov
, true);
2276 int bdrv_pread(BlockDriverState
*bs
, int64_t offset
,
2277 void *buf
, int count1
)
2279 uint8_t tmp_buf
[BDRV_SECTOR_SIZE
];
2280 int len
, nb_sectors
, count
;
2285 /* first read to align to sector start */
2286 len
= (BDRV_SECTOR_SIZE
- offset
) & (BDRV_SECTOR_SIZE
- 1);
2289 sector_num
= offset
>> BDRV_SECTOR_BITS
;
2291 if ((ret
= bdrv_read(bs
, sector_num
, tmp_buf
, 1)) < 0)
2293 memcpy(buf
, tmp_buf
+ (offset
& (BDRV_SECTOR_SIZE
- 1)), len
);
2301 /* read the sectors "in place" */
2302 nb_sectors
= count
>> BDRV_SECTOR_BITS
;
2303 if (nb_sectors
> 0) {
2304 if ((ret
= bdrv_read(bs
, sector_num
, buf
, nb_sectors
)) < 0)
2306 sector_num
+= nb_sectors
;
2307 len
= nb_sectors
<< BDRV_SECTOR_BITS
;
2312 /* add data from the last sector */
2314 if ((ret
= bdrv_read(bs
, sector_num
, tmp_buf
, 1)) < 0)
2316 memcpy(buf
, tmp_buf
, count
);
2321 int bdrv_pwritev(BlockDriverState
*bs
, int64_t offset
, QEMUIOVector
*qiov
)
2323 uint8_t tmp_buf
[BDRV_SECTOR_SIZE
];
2324 int len
, nb_sectors
, count
;
2330 /* first write to align to sector start */
2331 len
= (BDRV_SECTOR_SIZE
- offset
) & (BDRV_SECTOR_SIZE
- 1);
2334 sector_num
= offset
>> BDRV_SECTOR_BITS
;
2336 if ((ret
= bdrv_read(bs
, sector_num
, tmp_buf
, 1)) < 0)
2338 qemu_iovec_to_buf(qiov
, 0, tmp_buf
+ (offset
& (BDRV_SECTOR_SIZE
- 1)),
2340 if ((ret
= bdrv_write(bs
, sector_num
, tmp_buf
, 1)) < 0)
2348 /* write the sectors "in place" */
2349 nb_sectors
= count
>> BDRV_SECTOR_BITS
;
2350 if (nb_sectors
> 0) {
2351 QEMUIOVector qiov_inplace
;
2353 qemu_iovec_init(&qiov_inplace
, qiov
->niov
);
2354 qemu_iovec_concat(&qiov_inplace
, qiov
, len
,
2355 nb_sectors
<< BDRV_SECTOR_BITS
);
2356 ret
= bdrv_writev(bs
, sector_num
, &qiov_inplace
);
2357 qemu_iovec_destroy(&qiov_inplace
);
2362 sector_num
+= nb_sectors
;
2363 len
= nb_sectors
<< BDRV_SECTOR_BITS
;
2367 /* add data from the last sector */
2369 if ((ret
= bdrv_read(bs
, sector_num
, tmp_buf
, 1)) < 0)
2371 qemu_iovec_to_buf(qiov
, qiov
->size
- count
, tmp_buf
, count
);
2372 if ((ret
= bdrv_write(bs
, sector_num
, tmp_buf
, 1)) < 0)
2378 int bdrv_pwrite(BlockDriverState
*bs
, int64_t offset
,
2379 const void *buf
, int count1
)
2382 struct iovec iov
= {
2383 .iov_base
= (void *) buf
,
2387 qemu_iovec_init_external(&qiov
, &iov
, 1);
2388 return bdrv_pwritev(bs
, offset
, &qiov
);
2392 * Writes to the file and ensures that no writes are reordered across this
2393 * request (acts as a barrier)
2395 * Returns 0 on success, -errno in error cases.
2397 int bdrv_pwrite_sync(BlockDriverState
*bs
, int64_t offset
,
2398 const void *buf
, int count
)
2402 ret
= bdrv_pwrite(bs
, offset
, buf
, count
);
2407 /* No flush needed for cache modes that already do it */
2408 if (bs
->enable_write_cache
) {
2415 static int coroutine_fn
bdrv_co_do_copy_on_readv(BlockDriverState
*bs
,
2416 int64_t sector_num
, int nb_sectors
, QEMUIOVector
*qiov
)
2418 /* Perform I/O through a temporary buffer so that users who scribble over
2419 * their read buffer while the operation is in progress do not end up
2420 * modifying the image file. This is critical for zero-copy guest I/O
2421 * where anything might happen inside guest memory.
2423 void *bounce_buffer
;
2425 BlockDriver
*drv
= bs
->drv
;
2427 QEMUIOVector bounce_qiov
;
2428 int64_t cluster_sector_num
;
2429 int cluster_nb_sectors
;
2433 /* Cover entire cluster so no additional backing file I/O is required when
2434 * allocating cluster in the image file.
2436 bdrv_round_to_clusters(bs
, sector_num
, nb_sectors
,
2437 &cluster_sector_num
, &cluster_nb_sectors
);
2439 trace_bdrv_co_do_copy_on_readv(bs
, sector_num
, nb_sectors
,
2440 cluster_sector_num
, cluster_nb_sectors
);
2442 iov
.iov_len
= cluster_nb_sectors
* BDRV_SECTOR_SIZE
;
2443 iov
.iov_base
= bounce_buffer
= qemu_blockalign(bs
, iov
.iov_len
);
2444 qemu_iovec_init_external(&bounce_qiov
, &iov
, 1);
2446 ret
= drv
->bdrv_co_readv(bs
, cluster_sector_num
, cluster_nb_sectors
,
2452 if (drv
->bdrv_co_write_zeroes
&&
2453 buffer_is_zero(bounce_buffer
, iov
.iov_len
)) {
2454 ret
= bdrv_co_do_write_zeroes(bs
, cluster_sector_num
,
2455 cluster_nb_sectors
);
2457 /* This does not change the data on the disk, it is not necessary
2458 * to flush even in cache=writethrough mode.
2460 ret
= drv
->bdrv_co_writev(bs
, cluster_sector_num
, cluster_nb_sectors
,
2465 /* It might be okay to ignore write errors for guest requests. If this
2466 * is a deliberate copy-on-read then we don't want to ignore the error.
2467 * Simply report it in all cases.
2472 skip_bytes
= (sector_num
- cluster_sector_num
) * BDRV_SECTOR_SIZE
;
2473 qemu_iovec_from_buf(qiov
, 0, bounce_buffer
+ skip_bytes
,
2474 nb_sectors
* BDRV_SECTOR_SIZE
);
2477 qemu_vfree(bounce_buffer
);
2482 * Handle a read request in coroutine context
2484 static int coroutine_fn
bdrv_co_do_readv(BlockDriverState
*bs
,
2485 int64_t sector_num
, int nb_sectors
, QEMUIOVector
*qiov
,
2486 BdrvRequestFlags flags
)
2488 BlockDriver
*drv
= bs
->drv
;
2489 BdrvTrackedRequest req
;
2495 if (bdrv_check_request(bs
, sector_num
, nb_sectors
)) {
2499 /* throttling disk read I/O */
2500 if (bs
->io_limits_enabled
) {
2501 bdrv_io_limits_intercept(bs
, false, nb_sectors
);
2504 if (bs
->copy_on_read
) {
2505 flags
|= BDRV_REQ_COPY_ON_READ
;
2507 if (flags
& BDRV_REQ_COPY_ON_READ
) {
2508 bs
->copy_on_read_in_flight
++;
2511 if (bs
->copy_on_read_in_flight
) {
2512 wait_for_overlapping_requests(bs
, sector_num
, nb_sectors
);
2515 tracked_request_begin(&req
, bs
, sector_num
, nb_sectors
, false);
2517 if (flags
& BDRV_REQ_COPY_ON_READ
) {
2520 ret
= bdrv_co_is_allocated(bs
, sector_num
, nb_sectors
, &pnum
);
2525 if (!ret
|| pnum
!= nb_sectors
) {
2526 ret
= bdrv_co_do_copy_on_readv(bs
, sector_num
, nb_sectors
, qiov
);
2531 ret
= drv
->bdrv_co_readv(bs
, sector_num
, nb_sectors
, qiov
);
2534 tracked_request_end(&req
);
2536 if (flags
& BDRV_REQ_COPY_ON_READ
) {
2537 bs
->copy_on_read_in_flight
--;
2543 int coroutine_fn
bdrv_co_readv(BlockDriverState
*bs
, int64_t sector_num
,
2544 int nb_sectors
, QEMUIOVector
*qiov
)
2546 trace_bdrv_co_readv(bs
, sector_num
, nb_sectors
);
2548 return bdrv_co_do_readv(bs
, sector_num
, nb_sectors
, qiov
, 0);
2551 int coroutine_fn
bdrv_co_copy_on_readv(BlockDriverState
*bs
,
2552 int64_t sector_num
, int nb_sectors
, QEMUIOVector
*qiov
)
2554 trace_bdrv_co_copy_on_readv(bs
, sector_num
, nb_sectors
);
2556 return bdrv_co_do_readv(bs
, sector_num
, nb_sectors
, qiov
,
2557 BDRV_REQ_COPY_ON_READ
);
2560 static int coroutine_fn
bdrv_co_do_write_zeroes(BlockDriverState
*bs
,
2561 int64_t sector_num
, int nb_sectors
)
2563 BlockDriver
*drv
= bs
->drv
;
2568 /* TODO Emulate only part of misaligned requests instead of letting block
2569 * drivers return -ENOTSUP and emulate everything */
2571 /* First try the efficient write zeroes operation */
2572 if (drv
->bdrv_co_write_zeroes
) {
2573 ret
= drv
->bdrv_co_write_zeroes(bs
, sector_num
, nb_sectors
);
2574 if (ret
!= -ENOTSUP
) {
2579 /* Fall back to bounce buffer if write zeroes is unsupported */
2580 iov
.iov_len
= nb_sectors
* BDRV_SECTOR_SIZE
;
2581 iov
.iov_base
= qemu_blockalign(bs
, iov
.iov_len
);
2582 memset(iov
.iov_base
, 0, iov
.iov_len
);
2583 qemu_iovec_init_external(&qiov
, &iov
, 1);
2585 ret
= drv
->bdrv_co_writev(bs
, sector_num
, nb_sectors
, &qiov
);
2587 qemu_vfree(iov
.iov_base
);
2592 * Handle a write request in coroutine context
2594 static int coroutine_fn
bdrv_co_do_writev(BlockDriverState
*bs
,
2595 int64_t sector_num
, int nb_sectors
, QEMUIOVector
*qiov
,
2596 BdrvRequestFlags flags
)
2598 BlockDriver
*drv
= bs
->drv
;
2599 BdrvTrackedRequest req
;
2605 if (bs
->read_only
) {
2608 if (bdrv_check_request(bs
, sector_num
, nb_sectors
)) {
2612 /* throttling disk write I/O */
2613 if (bs
->io_limits_enabled
) {
2614 bdrv_io_limits_intercept(bs
, true, nb_sectors
);
2617 if (bs
->copy_on_read_in_flight
) {
2618 wait_for_overlapping_requests(bs
, sector_num
, nb_sectors
);
2621 tracked_request_begin(&req
, bs
, sector_num
, nb_sectors
, true);
2623 if (flags
& BDRV_REQ_ZERO_WRITE
) {
2624 ret
= bdrv_co_do_write_zeroes(bs
, sector_num
, nb_sectors
);
2626 ret
= drv
->bdrv_co_writev(bs
, sector_num
, nb_sectors
, qiov
);
2629 if (ret
== 0 && !bs
->enable_write_cache
) {
2630 ret
= bdrv_co_flush(bs
);
2633 if (bs
->dirty_bitmap
) {
2634 bdrv_set_dirty(bs
, sector_num
, nb_sectors
);
2637 if (bs
->wr_highest_sector
< sector_num
+ nb_sectors
- 1) {
2638 bs
->wr_highest_sector
= sector_num
+ nb_sectors
- 1;
2641 tracked_request_end(&req
);
2646 int coroutine_fn
bdrv_co_writev(BlockDriverState
*bs
, int64_t sector_num
,
2647 int nb_sectors
, QEMUIOVector
*qiov
)
2649 trace_bdrv_co_writev(bs
, sector_num
, nb_sectors
);
2651 return bdrv_co_do_writev(bs
, sector_num
, nb_sectors
, qiov
, 0);
2654 int coroutine_fn
bdrv_co_write_zeroes(BlockDriverState
*bs
,
2655 int64_t sector_num
, int nb_sectors
)
2657 trace_bdrv_co_write_zeroes(bs
, sector_num
, nb_sectors
);
2659 return bdrv_co_do_writev(bs
, sector_num
, nb_sectors
, NULL
,
2660 BDRV_REQ_ZERO_WRITE
);
2664 * Truncate file to 'offset' bytes (needed only for file protocols)
2666 int bdrv_truncate(BlockDriverState
*bs
, int64_t offset
)
2668 BlockDriver
*drv
= bs
->drv
;
2672 if (!drv
->bdrv_truncate
)
2676 if (bdrv_in_use(bs
))
2678 ret
= drv
->bdrv_truncate(bs
, offset
);
2680 ret
= refresh_total_sectors(bs
, offset
>> BDRV_SECTOR_BITS
);
2681 bdrv_dev_resize_cb(bs
);
2687 * Length of a allocated file in bytes. Sparse files are counted by actual
2688 * allocated space. Return < 0 if error or unknown.
2690 int64_t bdrv_get_allocated_file_size(BlockDriverState
*bs
)
2692 BlockDriver
*drv
= bs
->drv
;
2696 if (drv
->bdrv_get_allocated_file_size
) {
2697 return drv
->bdrv_get_allocated_file_size(bs
);
2700 return bdrv_get_allocated_file_size(bs
->file
);
2706 * Length of a file in bytes. Return < 0 if error or unknown.
2708 int64_t bdrv_getlength(BlockDriverState
*bs
)
2710 BlockDriver
*drv
= bs
->drv
;
2714 if (bs
->growable
|| bdrv_dev_has_removable_media(bs
)) {
2715 if (drv
->bdrv_getlength
) {
2716 return drv
->bdrv_getlength(bs
);
2719 return bs
->total_sectors
* BDRV_SECTOR_SIZE
;
2722 /* return 0 as number of sectors if no device present or error */
2723 void bdrv_get_geometry(BlockDriverState
*bs
, uint64_t *nb_sectors_ptr
)
2726 length
= bdrv_getlength(bs
);
2730 length
= length
>> BDRV_SECTOR_BITS
;
2731 *nb_sectors_ptr
= length
;
2734 /* throttling disk io limits */
2735 void bdrv_set_io_limits(BlockDriverState
*bs
,
2736 BlockIOLimit
*io_limits
)
2738 bs
->io_limits
= *io_limits
;
2739 bs
->io_limits_enabled
= bdrv_io_limits_enabled(bs
);
2742 void bdrv_set_on_error(BlockDriverState
*bs
, BlockdevOnError on_read_error
,
2743 BlockdevOnError on_write_error
)
2745 bs
->on_read_error
= on_read_error
;
2746 bs
->on_write_error
= on_write_error
;
2749 BlockdevOnError
bdrv_get_on_error(BlockDriverState
*bs
, bool is_read
)
2751 return is_read
? bs
->on_read_error
: bs
->on_write_error
;
2754 BlockErrorAction
bdrv_get_error_action(BlockDriverState
*bs
, bool is_read
, int error
)
2756 BlockdevOnError on_err
= is_read
? bs
->on_read_error
: bs
->on_write_error
;
2759 case BLOCKDEV_ON_ERROR_ENOSPC
:
2760 return (error
== ENOSPC
) ? BDRV_ACTION_STOP
: BDRV_ACTION_REPORT
;
2761 case BLOCKDEV_ON_ERROR_STOP
:
2762 return BDRV_ACTION_STOP
;
2763 case BLOCKDEV_ON_ERROR_REPORT
:
2764 return BDRV_ACTION_REPORT
;
2765 case BLOCKDEV_ON_ERROR_IGNORE
:
2766 return BDRV_ACTION_IGNORE
;
2772 /* This is done by device models because, while the block layer knows
2773 * about the error, it does not know whether an operation comes from
2774 * the device or the block layer (from a job, for example).
2776 void bdrv_error_action(BlockDriverState
*bs
, BlockErrorAction action
,
2777 bool is_read
, int error
)
2780 bdrv_emit_qmp_error_event(bs
, QEVENT_BLOCK_IO_ERROR
, action
, is_read
);
2781 if (action
== BDRV_ACTION_STOP
) {
2782 vm_stop(RUN_STATE_IO_ERROR
);
2783 bdrv_iostatus_set_err(bs
, error
);
2787 int bdrv_is_read_only(BlockDriverState
*bs
)
2789 return bs
->read_only
;
2792 int bdrv_is_sg(BlockDriverState
*bs
)
2797 int bdrv_enable_write_cache(BlockDriverState
*bs
)
2799 return bs
->enable_write_cache
;
2802 void bdrv_set_enable_write_cache(BlockDriverState
*bs
, bool wce
)
2804 bs
->enable_write_cache
= wce
;
2806 /* so a reopen() will preserve wce */
2808 bs
->open_flags
|= BDRV_O_CACHE_WB
;
2810 bs
->open_flags
&= ~BDRV_O_CACHE_WB
;
2814 int bdrv_is_encrypted(BlockDriverState
*bs
)
2816 if (bs
->backing_hd
&& bs
->backing_hd
->encrypted
)
2818 return bs
->encrypted
;
2821 int bdrv_key_required(BlockDriverState
*bs
)
2823 BlockDriverState
*backing_hd
= bs
->backing_hd
;
2825 if (backing_hd
&& backing_hd
->encrypted
&& !backing_hd
->valid_key
)
2827 return (bs
->encrypted
&& !bs
->valid_key
);
2830 int bdrv_set_key(BlockDriverState
*bs
, const char *key
)
2833 if (bs
->backing_hd
&& bs
->backing_hd
->encrypted
) {
2834 ret
= bdrv_set_key(bs
->backing_hd
, key
);
2840 if (!bs
->encrypted
) {
2842 } else if (!bs
->drv
|| !bs
->drv
->bdrv_set_key
) {
2845 ret
= bs
->drv
->bdrv_set_key(bs
, key
);
2848 } else if (!bs
->valid_key
) {
2850 /* call the change callback now, we skipped it on open */
2851 bdrv_dev_change_media_cb(bs
, true);
2856 const char *bdrv_get_format_name(BlockDriverState
*bs
)
2858 return bs
->drv
? bs
->drv
->format_name
: NULL
;
2861 void bdrv_iterate_format(void (*it
)(void *opaque
, const char *name
),
2866 QLIST_FOREACH(drv
, &bdrv_drivers
, list
) {
2867 it(opaque
, drv
->format_name
);
2871 BlockDriverState
*bdrv_find(const char *name
)
2873 BlockDriverState
*bs
;
2875 QTAILQ_FOREACH(bs
, &bdrv_states
, list
) {
2876 if (!strcmp(name
, bs
->device_name
)) {
2883 BlockDriverState
*bdrv_next(BlockDriverState
*bs
)
2886 return QTAILQ_FIRST(&bdrv_states
);
2888 return QTAILQ_NEXT(bs
, list
);
2891 void bdrv_iterate(void (*it
)(void *opaque
, BlockDriverState
*bs
), void *opaque
)
2893 BlockDriverState
*bs
;
2895 QTAILQ_FOREACH(bs
, &bdrv_states
, list
) {
2900 const char *bdrv_get_device_name(BlockDriverState
*bs
)
2902 return bs
->device_name
;
2905 int bdrv_get_flags(BlockDriverState
*bs
)
2907 return bs
->open_flags
;
2910 void bdrv_flush_all(void)
2912 BlockDriverState
*bs
;
2914 QTAILQ_FOREACH(bs
, &bdrv_states
, list
) {
2919 int bdrv_has_zero_init(BlockDriverState
*bs
)
2923 if (bs
->drv
->bdrv_has_zero_init
) {
2924 return bs
->drv
->bdrv_has_zero_init(bs
);
2930 typedef struct BdrvCoIsAllocatedData
{
2931 BlockDriverState
*bs
;
2932 BlockDriverState
*base
;
2938 } BdrvCoIsAllocatedData
;
2941 * Returns true iff the specified sector is present in the disk image. Drivers
2942 * not implementing the functionality are assumed to not support backing files,
2943 * hence all their sectors are reported as allocated.
2945 * If 'sector_num' is beyond the end of the disk image the return value is 0
2946 * and 'pnum' is set to 0.
2948 * 'pnum' is set to the number of sectors (including and immediately following
2949 * the specified sector) that are known to be in the same
2950 * allocated/unallocated state.
2952 * 'nb_sectors' is the max value 'pnum' should be set to. If nb_sectors goes
2953 * beyond the end of the disk image it will be clamped.
2955 int coroutine_fn
bdrv_co_is_allocated(BlockDriverState
*bs
, int64_t sector_num
,
2956 int nb_sectors
, int *pnum
)
2960 if (sector_num
>= bs
->total_sectors
) {
2965 n
= bs
->total_sectors
- sector_num
;
2966 if (n
< nb_sectors
) {
2970 if (!bs
->drv
->bdrv_co_is_allocated
) {
2975 return bs
->drv
->bdrv_co_is_allocated(bs
, sector_num
, nb_sectors
, pnum
);
2978 /* Coroutine wrapper for bdrv_is_allocated() */
2979 static void coroutine_fn
bdrv_is_allocated_co_entry(void *opaque
)
2981 BdrvCoIsAllocatedData
*data
= opaque
;
2982 BlockDriverState
*bs
= data
->bs
;
2984 data
->ret
= bdrv_co_is_allocated(bs
, data
->sector_num
, data
->nb_sectors
,
2990 * Synchronous wrapper around bdrv_co_is_allocated().
2992 * See bdrv_co_is_allocated() for details.
2994 int bdrv_is_allocated(BlockDriverState
*bs
, int64_t sector_num
, int nb_sectors
,
2998 BdrvCoIsAllocatedData data
= {
3000 .sector_num
= sector_num
,
3001 .nb_sectors
= nb_sectors
,
3006 co
= qemu_coroutine_create(bdrv_is_allocated_co_entry
);
3007 qemu_coroutine_enter(co
, &data
);
3008 while (!data
.done
) {
3015 * Given an image chain: ... -> [BASE] -> [INTER1] -> [INTER2] -> [TOP]
3017 * Return true if the given sector is allocated in any image between
3018 * BASE and TOP (inclusive). BASE can be NULL to check if the given
3019 * sector is allocated in any image of the chain. Return false otherwise.
3021 * 'pnum' is set to the number of sectors (including and immediately following
3022 * the specified sector) that are known to be in the same
3023 * allocated/unallocated state.
3026 int coroutine_fn
bdrv_co_is_allocated_above(BlockDriverState
*top
,
3027 BlockDriverState
*base
,
3029 int nb_sectors
, int *pnum
)
3031 BlockDriverState
*intermediate
;
3032 int ret
, n
= nb_sectors
;
3035 while (intermediate
&& intermediate
!= base
) {
3037 ret
= bdrv_co_is_allocated(intermediate
, sector_num
, nb_sectors
,
3047 * [sector_num, nb_sectors] is unallocated on top but intermediate
3050 * [sector_num+x, nr_sectors] allocated.
3052 if (n
> pnum_inter
&&
3053 (intermediate
== top
||
3054 sector_num
+ pnum_inter
< intermediate
->total_sectors
)) {
3058 intermediate
= intermediate
->backing_hd
;
3065 /* Coroutine wrapper for bdrv_is_allocated_above() */
3066 static void coroutine_fn
bdrv_is_allocated_above_co_entry(void *opaque
)
3068 BdrvCoIsAllocatedData
*data
= opaque
;
3069 BlockDriverState
*top
= data
->bs
;
3070 BlockDriverState
*base
= data
->base
;
3072 data
->ret
= bdrv_co_is_allocated_above(top
, base
, data
->sector_num
,
3073 data
->nb_sectors
, data
->pnum
);
3078 * Synchronous wrapper around bdrv_co_is_allocated_above().
3080 * See bdrv_co_is_allocated_above() for details.
3082 int bdrv_is_allocated_above(BlockDriverState
*top
, BlockDriverState
*base
,
3083 int64_t sector_num
, int nb_sectors
, int *pnum
)
3086 BdrvCoIsAllocatedData data
= {
3089 .sector_num
= sector_num
,
3090 .nb_sectors
= nb_sectors
,
3095 co
= qemu_coroutine_create(bdrv_is_allocated_above_co_entry
);
3096 qemu_coroutine_enter(co
, &data
);
3097 while (!data
.done
) {
3103 const char *bdrv_get_encrypted_filename(BlockDriverState
*bs
)
3105 if (bs
->backing_hd
&& bs
->backing_hd
->encrypted
)
3106 return bs
->backing_file
;
3107 else if (bs
->encrypted
)
3108 return bs
->filename
;
3113 void bdrv_get_backing_filename(BlockDriverState
*bs
,
3114 char *filename
, int filename_size
)
3116 pstrcpy(filename
, filename_size
, bs
->backing_file
);
3119 int bdrv_write_compressed(BlockDriverState
*bs
, int64_t sector_num
,
3120 const uint8_t *buf
, int nb_sectors
)
3122 BlockDriver
*drv
= bs
->drv
;
3125 if (!drv
->bdrv_write_compressed
)
3127 if (bdrv_check_request(bs
, sector_num
, nb_sectors
))
3130 assert(!bs
->dirty_bitmap
);
3132 return drv
->bdrv_write_compressed(bs
, sector_num
, buf
, nb_sectors
);
3135 int bdrv_get_info(BlockDriverState
*bs
, BlockDriverInfo
*bdi
)
3137 BlockDriver
*drv
= bs
->drv
;
3140 if (!drv
->bdrv_get_info
)
3142 memset(bdi
, 0, sizeof(*bdi
));
3143 return drv
->bdrv_get_info(bs
, bdi
);
3146 int bdrv_save_vmstate(BlockDriverState
*bs
, const uint8_t *buf
,
3147 int64_t pos
, int size
)
3150 struct iovec iov
= {
3151 .iov_base
= (void *) buf
,
3155 qemu_iovec_init_external(&qiov
, &iov
, 1);
3156 return bdrv_writev_vmstate(bs
, &qiov
, pos
);
3159 int bdrv_writev_vmstate(BlockDriverState
*bs
, QEMUIOVector
*qiov
, int64_t pos
)
3161 BlockDriver
*drv
= bs
->drv
;
3165 } else if (drv
->bdrv_save_vmstate
) {
3166 return drv
->bdrv_save_vmstate(bs
, qiov
, pos
);
3167 } else if (bs
->file
) {
3168 return bdrv_writev_vmstate(bs
->file
, qiov
, pos
);
3174 int bdrv_load_vmstate(BlockDriverState
*bs
, uint8_t *buf
,
3175 int64_t pos
, int size
)
3177 BlockDriver
*drv
= bs
->drv
;
3180 if (drv
->bdrv_load_vmstate
)
3181 return drv
->bdrv_load_vmstate(bs
, buf
, pos
, size
);
3183 return bdrv_load_vmstate(bs
->file
, buf
, pos
, size
);
3187 void bdrv_debug_event(BlockDriverState
*bs
, BlkDebugEvent event
)
3189 if (!bs
|| !bs
->drv
|| !bs
->drv
->bdrv_debug_event
) {
3193 bs
->drv
->bdrv_debug_event(bs
, event
);
3196 int bdrv_debug_breakpoint(BlockDriverState
*bs
, const char *event
,
3199 while (bs
&& bs
->drv
&& !bs
->drv
->bdrv_debug_breakpoint
) {
3203 if (bs
&& bs
->drv
&& bs
->drv
->bdrv_debug_breakpoint
) {
3204 return bs
->drv
->bdrv_debug_breakpoint(bs
, event
, tag
);
3210 int bdrv_debug_resume(BlockDriverState
*bs
, const char *tag
)
3212 while (bs
&& bs
->drv
&& !bs
->drv
->bdrv_debug_resume
) {
3216 if (bs
&& bs
->drv
&& bs
->drv
->bdrv_debug_resume
) {
3217 return bs
->drv
->bdrv_debug_resume(bs
, tag
);
3223 bool bdrv_debug_is_suspended(BlockDriverState
*bs
, const char *tag
)
3225 while (bs
&& bs
->drv
&& !bs
->drv
->bdrv_debug_is_suspended
) {
3229 if (bs
&& bs
->drv
&& bs
->drv
->bdrv_debug_is_suspended
) {
3230 return bs
->drv
->bdrv_debug_is_suspended(bs
, tag
);
3236 int bdrv_is_snapshot(BlockDriverState
*bs
)
3238 return !!(bs
->open_flags
& BDRV_O_SNAPSHOT
);
3241 /* backing_file can either be relative, or absolute, or a protocol. If it is
3242 * relative, it must be relative to the chain. So, passing in bs->filename
3243 * from a BDS as backing_file should not be done, as that may be relative to
3244 * the CWD rather than the chain. */
3245 BlockDriverState
*bdrv_find_backing_image(BlockDriverState
*bs
,
3246 const char *backing_file
)
3248 char *filename_full
= NULL
;
3249 char *backing_file_full
= NULL
;
3250 char *filename_tmp
= NULL
;
3251 int is_protocol
= 0;
3252 BlockDriverState
*curr_bs
= NULL
;
3253 BlockDriverState
*retval
= NULL
;
3255 if (!bs
|| !bs
->drv
|| !backing_file
) {
3259 filename_full
= g_malloc(PATH_MAX
);
3260 backing_file_full
= g_malloc(PATH_MAX
);
3261 filename_tmp
= g_malloc(PATH_MAX
);
3263 is_protocol
= path_has_protocol(backing_file
);
3265 for (curr_bs
= bs
; curr_bs
->backing_hd
; curr_bs
= curr_bs
->backing_hd
) {
3267 /* If either of the filename paths is actually a protocol, then
3268 * compare unmodified paths; otherwise make paths relative */
3269 if (is_protocol
|| path_has_protocol(curr_bs
->backing_file
)) {
3270 if (strcmp(backing_file
, curr_bs
->backing_file
) == 0) {
3271 retval
= curr_bs
->backing_hd
;
3275 /* If not an absolute filename path, make it relative to the current
3276 * image's filename path */
3277 path_combine(filename_tmp
, PATH_MAX
, curr_bs
->filename
,
3280 /* We are going to compare absolute pathnames */
3281 if (!realpath(filename_tmp
, filename_full
)) {
3285 /* We need to make sure the backing filename we are comparing against
3286 * is relative to the current image filename (or absolute) */
3287 path_combine(filename_tmp
, PATH_MAX
, curr_bs
->filename
,
3288 curr_bs
->backing_file
);
3290 if (!realpath(filename_tmp
, backing_file_full
)) {
3294 if (strcmp(backing_file_full
, filename_full
) == 0) {
3295 retval
= curr_bs
->backing_hd
;
3301 g_free(filename_full
);
3302 g_free(backing_file_full
);
3303 g_free(filename_tmp
);
3307 int bdrv_get_backing_file_depth(BlockDriverState
*bs
)
3313 if (!bs
->backing_hd
) {
3317 return 1 + bdrv_get_backing_file_depth(bs
->backing_hd
);
3320 BlockDriverState
*bdrv_find_base(BlockDriverState
*bs
)
3322 BlockDriverState
*curr_bs
= NULL
;
3330 while (curr_bs
->backing_hd
) {
3331 curr_bs
= curr_bs
->backing_hd
;
3336 /**************************************************************/
3339 BlockDriverAIOCB
*bdrv_aio_readv(BlockDriverState
*bs
, int64_t sector_num
,
3340 QEMUIOVector
*qiov
, int nb_sectors
,
3341 BlockDriverCompletionFunc
*cb
, void *opaque
)
3343 trace_bdrv_aio_readv(bs
, sector_num
, nb_sectors
, opaque
);
3345 return bdrv_co_aio_rw_vector(bs
, sector_num
, qiov
, nb_sectors
,
3349 BlockDriverAIOCB
*bdrv_aio_writev(BlockDriverState
*bs
, int64_t sector_num
,
3350 QEMUIOVector
*qiov
, int nb_sectors
,
3351 BlockDriverCompletionFunc
*cb
, void *opaque
)
3353 trace_bdrv_aio_writev(bs
, sector_num
, nb_sectors
, opaque
);
3355 return bdrv_co_aio_rw_vector(bs
, sector_num
, qiov
, nb_sectors
,
3360 typedef struct MultiwriteCB
{
3365 BlockDriverCompletionFunc
*cb
;
3367 QEMUIOVector
*free_qiov
;
3371 static void multiwrite_user_cb(MultiwriteCB
*mcb
)
3375 for (i
= 0; i
< mcb
->num_callbacks
; i
++) {
3376 mcb
->callbacks
[i
].cb(mcb
->callbacks
[i
].opaque
, mcb
->error
);
3377 if (mcb
->callbacks
[i
].free_qiov
) {
3378 qemu_iovec_destroy(mcb
->callbacks
[i
].free_qiov
);
3380 g_free(mcb
->callbacks
[i
].free_qiov
);
3384 static void multiwrite_cb(void *opaque
, int ret
)
3386 MultiwriteCB
*mcb
= opaque
;
3388 trace_multiwrite_cb(mcb
, ret
);
3390 if (ret
< 0 && !mcb
->error
) {
3394 mcb
->num_requests
--;
3395 if (mcb
->num_requests
== 0) {
3396 multiwrite_user_cb(mcb
);
3401 static int multiwrite_req_compare(const void *a
, const void *b
)
3403 const BlockRequest
*req1
= a
, *req2
= b
;
3406 * Note that we can't simply subtract req2->sector from req1->sector
3407 * here as that could overflow the return value.
3409 if (req1
->sector
> req2
->sector
) {
3411 } else if (req1
->sector
< req2
->sector
) {
3419 * Takes a bunch of requests and tries to merge them. Returns the number of
3420 * requests that remain after merging.
3422 static int multiwrite_merge(BlockDriverState
*bs
, BlockRequest
*reqs
,
3423 int num_reqs
, MultiwriteCB
*mcb
)
3427 // Sort requests by start sector
3428 qsort(reqs
, num_reqs
, sizeof(*reqs
), &multiwrite_req_compare
);
3430 // Check if adjacent requests touch the same clusters. If so, combine them,
3431 // filling up gaps with zero sectors.
3433 for (i
= 1; i
< num_reqs
; i
++) {
3435 int64_t oldreq_last
= reqs
[outidx
].sector
+ reqs
[outidx
].nb_sectors
;
3437 // Handle exactly sequential writes and overlapping writes.
3438 if (reqs
[i
].sector
<= oldreq_last
) {
3442 if (reqs
[outidx
].qiov
->niov
+ reqs
[i
].qiov
->niov
+ 1 > IOV_MAX
) {
3448 QEMUIOVector
*qiov
= g_malloc0(sizeof(*qiov
));
3449 qemu_iovec_init(qiov
,
3450 reqs
[outidx
].qiov
->niov
+ reqs
[i
].qiov
->niov
+ 1);
3452 // Add the first request to the merged one. If the requests are
3453 // overlapping, drop the last sectors of the first request.
3454 size
= (reqs
[i
].sector
- reqs
[outidx
].sector
) << 9;
3455 qemu_iovec_concat(qiov
, reqs
[outidx
].qiov
, 0, size
);
3457 // We should need to add any zeros between the two requests
3458 assert (reqs
[i
].sector
<= oldreq_last
);
3460 // Add the second request
3461 qemu_iovec_concat(qiov
, reqs
[i
].qiov
, 0, reqs
[i
].qiov
->size
);
3463 reqs
[outidx
].nb_sectors
= qiov
->size
>> 9;
3464 reqs
[outidx
].qiov
= qiov
;
3466 mcb
->callbacks
[i
].free_qiov
= reqs
[outidx
].qiov
;
3469 reqs
[outidx
].sector
= reqs
[i
].sector
;
3470 reqs
[outidx
].nb_sectors
= reqs
[i
].nb_sectors
;
3471 reqs
[outidx
].qiov
= reqs
[i
].qiov
;
3479 * Submit multiple AIO write requests at once.
3481 * On success, the function returns 0 and all requests in the reqs array have
3482 * been submitted. In error case this function returns -1, and any of the
3483 * requests may or may not be submitted yet. In particular, this means that the
3484 * callback will be called for some of the requests, for others it won't. The
3485 * caller must check the error field of the BlockRequest to wait for the right
3486 * callbacks (if error != 0, no callback will be called).
3488 * The implementation may modify the contents of the reqs array, e.g. to merge
3489 * requests. However, the fields opaque and error are left unmodified as they
3490 * are used to signal failure for a single request to the caller.
3492 int bdrv_aio_multiwrite(BlockDriverState
*bs
, BlockRequest
*reqs
, int num_reqs
)
3497 /* don't submit writes if we don't have a medium */
3498 if (bs
->drv
== NULL
) {
3499 for (i
= 0; i
< num_reqs
; i
++) {
3500 reqs
[i
].error
= -ENOMEDIUM
;
3505 if (num_reqs
== 0) {
3509 // Create MultiwriteCB structure
3510 mcb
= g_malloc0(sizeof(*mcb
) + num_reqs
* sizeof(*mcb
->callbacks
));
3511 mcb
->num_requests
= 0;
3512 mcb
->num_callbacks
= num_reqs
;
3514 for (i
= 0; i
< num_reqs
; i
++) {
3515 mcb
->callbacks
[i
].cb
= reqs
[i
].cb
;
3516 mcb
->callbacks
[i
].opaque
= reqs
[i
].opaque
;
3519 // Check for mergable requests
3520 num_reqs
= multiwrite_merge(bs
, reqs
, num_reqs
, mcb
);
3522 trace_bdrv_aio_multiwrite(mcb
, mcb
->num_callbacks
, num_reqs
);
3524 /* Run the aio requests. */
3525 mcb
->num_requests
= num_reqs
;
3526 for (i
= 0; i
< num_reqs
; i
++) {
3527 bdrv_aio_writev(bs
, reqs
[i
].sector
, reqs
[i
].qiov
,
3528 reqs
[i
].nb_sectors
, multiwrite_cb
, mcb
);
3534 void bdrv_aio_cancel(BlockDriverAIOCB
*acb
)
3536 acb
->aiocb_info
->cancel(acb
);
3539 /* block I/O throttling */
3540 static bool bdrv_exceed_bps_limits(BlockDriverState
*bs
, int nb_sectors
,
3541 bool is_write
, double elapsed_time
, uint64_t *wait
)
3543 uint64_t bps_limit
= 0;
3545 double bytes_limit
, bytes_base
, bytes_res
;
3546 double slice_time
, wait_time
;
3548 if (bs
->io_limits
.bps
[BLOCK_IO_LIMIT_TOTAL
]) {
3549 bps_limit
= bs
->io_limits
.bps
[BLOCK_IO_LIMIT_TOTAL
];
3550 } else if (bs
->io_limits
.bps
[is_write
]) {
3551 bps_limit
= bs
->io_limits
.bps
[is_write
];
3560 slice_time
= bs
->slice_end
- bs
->slice_start
;
3561 slice_time
/= (NANOSECONDS_PER_SECOND
);
3562 bytes_limit
= bps_limit
* slice_time
;
3563 bytes_base
= bs
->slice_submitted
.bytes
[is_write
];
3564 if (bs
->io_limits
.bps
[BLOCK_IO_LIMIT_TOTAL
]) {
3565 bytes_base
+= bs
->slice_submitted
.bytes
[!is_write
];
3568 /* bytes_base: the bytes of data which have been read/written; and
3569 * it is obtained from the history statistic info.
3570 * bytes_res: the remaining bytes of data which need to be read/written.
3571 * (bytes_base + bytes_res) / bps_limit: used to calcuate
3572 * the total time for completing reading/writting all data.
3574 bytes_res
= (unsigned) nb_sectors
* BDRV_SECTOR_SIZE
;
3576 if (bytes_base
+ bytes_res
<= bytes_limit
) {
3584 /* Calc approx time to dispatch */
3585 wait_time
= (bytes_base
+ bytes_res
) / bps_limit
- elapsed_time
;
3587 /* When the I/O rate at runtime exceeds the limits,
3588 * bs->slice_end need to be extended in order that the current statistic
3589 * info can be kept until the timer fire, so it is increased and tuned
3590 * based on the result of experiment.
3592 extension
= wait_time
* NANOSECONDS_PER_SECOND
;
3593 extension
= DIV_ROUND_UP(extension
, BLOCK_IO_SLICE_TIME
) *
3594 BLOCK_IO_SLICE_TIME
;
3595 bs
->slice_end
+= extension
;
3597 *wait
= wait_time
* NANOSECONDS_PER_SECOND
;
3603 static bool bdrv_exceed_iops_limits(BlockDriverState
*bs
, bool is_write
,
3604 double elapsed_time
, uint64_t *wait
)
3606 uint64_t iops_limit
= 0;
3607 double ios_limit
, ios_base
;
3608 double slice_time
, wait_time
;
3610 if (bs
->io_limits
.iops
[BLOCK_IO_LIMIT_TOTAL
]) {
3611 iops_limit
= bs
->io_limits
.iops
[BLOCK_IO_LIMIT_TOTAL
];
3612 } else if (bs
->io_limits
.iops
[is_write
]) {
3613 iops_limit
= bs
->io_limits
.iops
[is_write
];
3622 slice_time
= bs
->slice_end
- bs
->slice_start
;
3623 slice_time
/= (NANOSECONDS_PER_SECOND
);
3624 ios_limit
= iops_limit
* slice_time
;
3625 ios_base
= bs
->slice_submitted
.ios
[is_write
];
3626 if (bs
->io_limits
.iops
[BLOCK_IO_LIMIT_TOTAL
]) {
3627 ios_base
+= bs
->slice_submitted
.ios
[!is_write
];
3630 if (ios_base
+ 1 <= ios_limit
) {
3638 /* Calc approx time to dispatch, in seconds */
3639 wait_time
= (ios_base
+ 1) / iops_limit
;
3640 if (wait_time
> elapsed_time
) {
3641 wait_time
= wait_time
- elapsed_time
;
3646 /* Exceeded current slice, extend it by another slice time */
3647 bs
->slice_end
+= BLOCK_IO_SLICE_TIME
;
3649 *wait
= wait_time
* NANOSECONDS_PER_SECOND
;
3655 static bool bdrv_exceed_io_limits(BlockDriverState
*bs
, int nb_sectors
,
3656 bool is_write
, int64_t *wait
)
3658 int64_t now
, max_wait
;
3659 uint64_t bps_wait
= 0, iops_wait
= 0;
3660 double elapsed_time
;
3661 int bps_ret
, iops_ret
;
3663 now
= qemu_get_clock_ns(vm_clock
);
3664 if (now
> bs
->slice_end
) {
3665 bs
->slice_start
= now
;
3666 bs
->slice_end
= now
+ BLOCK_IO_SLICE_TIME
;
3667 memset(&bs
->slice_submitted
, 0, sizeof(bs
->slice_submitted
));
3670 elapsed_time
= now
- bs
->slice_start
;
3671 elapsed_time
/= (NANOSECONDS_PER_SECOND
);
3673 bps_ret
= bdrv_exceed_bps_limits(bs
, nb_sectors
,
3674 is_write
, elapsed_time
, &bps_wait
);
3675 iops_ret
= bdrv_exceed_iops_limits(bs
, is_write
,
3676 elapsed_time
, &iops_wait
);
3677 if (bps_ret
|| iops_ret
) {
3678 max_wait
= bps_wait
> iops_wait
? bps_wait
: iops_wait
;
3683 now
= qemu_get_clock_ns(vm_clock
);
3684 if (bs
->slice_end
< now
+ max_wait
) {
3685 bs
->slice_end
= now
+ max_wait
;
3695 bs
->slice_submitted
.bytes
[is_write
] += (int64_t)nb_sectors
*
3697 bs
->slice_submitted
.ios
[is_write
]++;
3702 /**************************************************************/
3703 /* async block device emulation */
3705 typedef struct BlockDriverAIOCBSync
{
3706 BlockDriverAIOCB common
;
3709 /* vector translation state */
3713 } BlockDriverAIOCBSync
;
3715 static void bdrv_aio_cancel_em(BlockDriverAIOCB
*blockacb
)
3717 BlockDriverAIOCBSync
*acb
=
3718 container_of(blockacb
, BlockDriverAIOCBSync
, common
);
3719 qemu_bh_delete(acb
->bh
);
3721 qemu_aio_release(acb
);
3724 static const AIOCBInfo bdrv_em_aiocb_info
= {
3725 .aiocb_size
= sizeof(BlockDriverAIOCBSync
),
3726 .cancel
= bdrv_aio_cancel_em
,
3729 static void bdrv_aio_bh_cb(void *opaque
)
3731 BlockDriverAIOCBSync
*acb
= opaque
;
3734 qemu_iovec_from_buf(acb
->qiov
, 0, acb
->bounce
, acb
->qiov
->size
);
3735 qemu_vfree(acb
->bounce
);
3736 acb
->common
.cb(acb
->common
.opaque
, acb
->ret
);
3737 qemu_bh_delete(acb
->bh
);
3739 qemu_aio_release(acb
);
3742 static BlockDriverAIOCB
*bdrv_aio_rw_vector(BlockDriverState
*bs
,
3746 BlockDriverCompletionFunc
*cb
,
3751 BlockDriverAIOCBSync
*acb
;
3753 acb
= qemu_aio_get(&bdrv_em_aiocb_info
, bs
, cb
, opaque
);
3754 acb
->is_write
= is_write
;
3756 acb
->bounce
= qemu_blockalign(bs
, qiov
->size
);
3757 acb
->bh
= qemu_bh_new(bdrv_aio_bh_cb
, acb
);
3760 qemu_iovec_to_buf(acb
->qiov
, 0, acb
->bounce
, qiov
->size
);
3761 acb
->ret
= bs
->drv
->bdrv_write(bs
, sector_num
, acb
->bounce
, nb_sectors
);
3763 acb
->ret
= bs
->drv
->bdrv_read(bs
, sector_num
, acb
->bounce
, nb_sectors
);
3766 qemu_bh_schedule(acb
->bh
);
3768 return &acb
->common
;
3771 static BlockDriverAIOCB
*bdrv_aio_readv_em(BlockDriverState
*bs
,
3772 int64_t sector_num
, QEMUIOVector
*qiov
, int nb_sectors
,
3773 BlockDriverCompletionFunc
*cb
, void *opaque
)
3775 return bdrv_aio_rw_vector(bs
, sector_num
, qiov
, nb_sectors
, cb
, opaque
, 0);
3778 static BlockDriverAIOCB
*bdrv_aio_writev_em(BlockDriverState
*bs
,
3779 int64_t sector_num
, QEMUIOVector
*qiov
, int nb_sectors
,
3780 BlockDriverCompletionFunc
*cb
, void *opaque
)
3782 return bdrv_aio_rw_vector(bs
, sector_num
, qiov
, nb_sectors
, cb
, opaque
, 1);
3786 typedef struct BlockDriverAIOCBCoroutine
{
3787 BlockDriverAIOCB common
;
3792 } BlockDriverAIOCBCoroutine
;
3794 static void bdrv_aio_co_cancel_em(BlockDriverAIOCB
*blockacb
)
3796 BlockDriverAIOCBCoroutine
*acb
=
3797 container_of(blockacb
, BlockDriverAIOCBCoroutine
, common
);
3806 static const AIOCBInfo bdrv_em_co_aiocb_info
= {
3807 .aiocb_size
= sizeof(BlockDriverAIOCBCoroutine
),
3808 .cancel
= bdrv_aio_co_cancel_em
,
3811 static void bdrv_co_em_bh(void *opaque
)
3813 BlockDriverAIOCBCoroutine
*acb
= opaque
;
3815 acb
->common
.cb(acb
->common
.opaque
, acb
->req
.error
);
3821 qemu_bh_delete(acb
->bh
);
3822 qemu_aio_release(acb
);
3825 /* Invoke bdrv_co_do_readv/bdrv_co_do_writev */
3826 static void coroutine_fn
bdrv_co_do_rw(void *opaque
)
3828 BlockDriverAIOCBCoroutine
*acb
= opaque
;
3829 BlockDriverState
*bs
= acb
->common
.bs
;
3831 if (!acb
->is_write
) {
3832 acb
->req
.error
= bdrv_co_do_readv(bs
, acb
->req
.sector
,
3833 acb
->req
.nb_sectors
, acb
->req
.qiov
, 0);
3835 acb
->req
.error
= bdrv_co_do_writev(bs
, acb
->req
.sector
,
3836 acb
->req
.nb_sectors
, acb
->req
.qiov
, 0);
3839 acb
->bh
= qemu_bh_new(bdrv_co_em_bh
, acb
);
3840 qemu_bh_schedule(acb
->bh
);
3843 static BlockDriverAIOCB
*bdrv_co_aio_rw_vector(BlockDriverState
*bs
,
3847 BlockDriverCompletionFunc
*cb
,
3852 BlockDriverAIOCBCoroutine
*acb
;
3854 acb
= qemu_aio_get(&bdrv_em_co_aiocb_info
, bs
, cb
, opaque
);
3855 acb
->req
.sector
= sector_num
;
3856 acb
->req
.nb_sectors
= nb_sectors
;
3857 acb
->req
.qiov
= qiov
;
3858 acb
->is_write
= is_write
;
3861 co
= qemu_coroutine_create(bdrv_co_do_rw
);
3862 qemu_coroutine_enter(co
, acb
);
3864 return &acb
->common
;
3867 static void coroutine_fn
bdrv_aio_flush_co_entry(void *opaque
)
3869 BlockDriverAIOCBCoroutine
*acb
= opaque
;
3870 BlockDriverState
*bs
= acb
->common
.bs
;
3872 acb
->req
.error
= bdrv_co_flush(bs
);
3873 acb
->bh
= qemu_bh_new(bdrv_co_em_bh
, acb
);
3874 qemu_bh_schedule(acb
->bh
);
3877 BlockDriverAIOCB
*bdrv_aio_flush(BlockDriverState
*bs
,
3878 BlockDriverCompletionFunc
*cb
, void *opaque
)
3880 trace_bdrv_aio_flush(bs
, opaque
);
3883 BlockDriverAIOCBCoroutine
*acb
;
3885 acb
= qemu_aio_get(&bdrv_em_co_aiocb_info
, bs
, cb
, opaque
);
3888 co
= qemu_coroutine_create(bdrv_aio_flush_co_entry
);
3889 qemu_coroutine_enter(co
, acb
);
3891 return &acb
->common
;
3894 static void coroutine_fn
bdrv_aio_discard_co_entry(void *opaque
)
3896 BlockDriverAIOCBCoroutine
*acb
= opaque
;
3897 BlockDriverState
*bs
= acb
->common
.bs
;
3899 acb
->req
.error
= bdrv_co_discard(bs
, acb
->req
.sector
, acb
->req
.nb_sectors
);
3900 acb
->bh
= qemu_bh_new(bdrv_co_em_bh
, acb
);
3901 qemu_bh_schedule(acb
->bh
);
3904 BlockDriverAIOCB
*bdrv_aio_discard(BlockDriverState
*bs
,
3905 int64_t sector_num
, int nb_sectors
,
3906 BlockDriverCompletionFunc
*cb
, void *opaque
)
3909 BlockDriverAIOCBCoroutine
*acb
;
3911 trace_bdrv_aio_discard(bs
, sector_num
, nb_sectors
, opaque
);
3913 acb
= qemu_aio_get(&bdrv_em_co_aiocb_info
, bs
, cb
, opaque
);
3914 acb
->req
.sector
= sector_num
;
3915 acb
->req
.nb_sectors
= nb_sectors
;
3917 co
= qemu_coroutine_create(bdrv_aio_discard_co_entry
);
3918 qemu_coroutine_enter(co
, acb
);
3920 return &acb
->common
;
3923 void bdrv_init(void)
3925 module_call_init(MODULE_INIT_BLOCK
);
3928 void bdrv_init_with_whitelist(void)
3930 use_bdrv_whitelist
= 1;
3934 void *qemu_aio_get(const AIOCBInfo
*aiocb_info
, BlockDriverState
*bs
,
3935 BlockDriverCompletionFunc
*cb
, void *opaque
)
3937 BlockDriverAIOCB
*acb
;
3939 acb
= g_slice_alloc(aiocb_info
->aiocb_size
);
3940 acb
->aiocb_info
= aiocb_info
;
3943 acb
->opaque
= opaque
;
3947 void qemu_aio_release(void *p
)
3949 BlockDriverAIOCB
*acb
= p
;
3950 g_slice_free1(acb
->aiocb_info
->aiocb_size
, acb
);
3953 /**************************************************************/
3954 /* Coroutine block device emulation */
3956 typedef struct CoroutineIOCompletion
{
3957 Coroutine
*coroutine
;
3959 } CoroutineIOCompletion
;
3961 static void bdrv_co_io_em_complete(void *opaque
, int ret
)
3963 CoroutineIOCompletion
*co
= opaque
;
3966 qemu_coroutine_enter(co
->coroutine
, NULL
);
3969 static int coroutine_fn
bdrv_co_io_em(BlockDriverState
*bs
, int64_t sector_num
,
3970 int nb_sectors
, QEMUIOVector
*iov
,
3973 CoroutineIOCompletion co
= {
3974 .coroutine
= qemu_coroutine_self(),
3976 BlockDriverAIOCB
*acb
;
3979 acb
= bs
->drv
->bdrv_aio_writev(bs
, sector_num
, iov
, nb_sectors
,
3980 bdrv_co_io_em_complete
, &co
);
3982 acb
= bs
->drv
->bdrv_aio_readv(bs
, sector_num
, iov
, nb_sectors
,
3983 bdrv_co_io_em_complete
, &co
);
3986 trace_bdrv_co_io_em(bs
, sector_num
, nb_sectors
, is_write
, acb
);
3990 qemu_coroutine_yield();
3995 static int coroutine_fn
bdrv_co_readv_em(BlockDriverState
*bs
,
3996 int64_t sector_num
, int nb_sectors
,
3999 return bdrv_co_io_em(bs
, sector_num
, nb_sectors
, iov
, false);
4002 static int coroutine_fn
bdrv_co_writev_em(BlockDriverState
*bs
,
4003 int64_t sector_num
, int nb_sectors
,
4006 return bdrv_co_io_em(bs
, sector_num
, nb_sectors
, iov
, true);
4009 static void coroutine_fn
bdrv_flush_co_entry(void *opaque
)
4011 RwCo
*rwco
= opaque
;
4013 rwco
->ret
= bdrv_co_flush(rwco
->bs
);
4016 int coroutine_fn
bdrv_co_flush(BlockDriverState
*bs
)
4020 if (!bs
|| !bdrv_is_inserted(bs
) || bdrv_is_read_only(bs
)) {
4024 /* Write back cached data to the OS even with cache=unsafe */
4025 BLKDBG_EVENT(bs
->file
, BLKDBG_FLUSH_TO_OS
);
4026 if (bs
->drv
->bdrv_co_flush_to_os
) {
4027 ret
= bs
->drv
->bdrv_co_flush_to_os(bs
);
4033 /* But don't actually force it to the disk with cache=unsafe */
4034 if (bs
->open_flags
& BDRV_O_NO_FLUSH
) {
4038 BLKDBG_EVENT(bs
->file
, BLKDBG_FLUSH_TO_DISK
);
4039 if (bs
->drv
->bdrv_co_flush_to_disk
) {
4040 ret
= bs
->drv
->bdrv_co_flush_to_disk(bs
);
4041 } else if (bs
->drv
->bdrv_aio_flush
) {
4042 BlockDriverAIOCB
*acb
;
4043 CoroutineIOCompletion co
= {
4044 .coroutine
= qemu_coroutine_self(),
4047 acb
= bs
->drv
->bdrv_aio_flush(bs
, bdrv_co_io_em_complete
, &co
);
4051 qemu_coroutine_yield();
4056 * Some block drivers always operate in either writethrough or unsafe
4057 * mode and don't support bdrv_flush therefore. Usually qemu doesn't
4058 * know how the server works (because the behaviour is hardcoded or
4059 * depends on server-side configuration), so we can't ensure that
4060 * everything is safe on disk. Returning an error doesn't work because
4061 * that would break guests even if the server operates in writethrough
4064 * Let's hope the user knows what he's doing.
4072 /* Now flush the underlying protocol. It will also have BDRV_O_NO_FLUSH
4073 * in the case of cache=unsafe, so there are no useless flushes.
4076 return bdrv_co_flush(bs
->file
);
4079 void bdrv_invalidate_cache(BlockDriverState
*bs
)
4081 if (bs
->drv
&& bs
->drv
->bdrv_invalidate_cache
) {
4082 bs
->drv
->bdrv_invalidate_cache(bs
);
4086 void bdrv_invalidate_cache_all(void)
4088 BlockDriverState
*bs
;
4090 QTAILQ_FOREACH(bs
, &bdrv_states
, list
) {
4091 bdrv_invalidate_cache(bs
);
4095 void bdrv_clear_incoming_migration_all(void)
4097 BlockDriverState
*bs
;
4099 QTAILQ_FOREACH(bs
, &bdrv_states
, list
) {
4100 bs
->open_flags
= bs
->open_flags
& ~(BDRV_O_INCOMING
);
4104 int bdrv_flush(BlockDriverState
*bs
)
4112 if (qemu_in_coroutine()) {
4113 /* Fast-path if already in coroutine context */
4114 bdrv_flush_co_entry(&rwco
);
4116 co
= qemu_coroutine_create(bdrv_flush_co_entry
);
4117 qemu_coroutine_enter(co
, &rwco
);
4118 while (rwco
.ret
== NOT_DONE
) {
4126 static void coroutine_fn
bdrv_discard_co_entry(void *opaque
)
4128 RwCo
*rwco
= opaque
;
4130 rwco
->ret
= bdrv_co_discard(rwco
->bs
, rwco
->sector_num
, rwco
->nb_sectors
);
4133 int coroutine_fn
bdrv_co_discard(BlockDriverState
*bs
, int64_t sector_num
,
4138 } else if (bdrv_check_request(bs
, sector_num
, nb_sectors
)) {
4140 } else if (bs
->read_only
) {
4144 if (bs
->dirty_bitmap
) {
4145 bdrv_reset_dirty(bs
, sector_num
, nb_sectors
);
4148 /* Do nothing if disabled. */
4149 if (!(bs
->open_flags
& BDRV_O_UNMAP
)) {
4153 if (bs
->drv
->bdrv_co_discard
) {
4154 return bs
->drv
->bdrv_co_discard(bs
, sector_num
, nb_sectors
);
4155 } else if (bs
->drv
->bdrv_aio_discard
) {
4156 BlockDriverAIOCB
*acb
;
4157 CoroutineIOCompletion co
= {
4158 .coroutine
= qemu_coroutine_self(),
4161 acb
= bs
->drv
->bdrv_aio_discard(bs
, sector_num
, nb_sectors
,
4162 bdrv_co_io_em_complete
, &co
);
4166 qemu_coroutine_yield();
4174 int bdrv_discard(BlockDriverState
*bs
, int64_t sector_num
, int nb_sectors
)
4179 .sector_num
= sector_num
,
4180 .nb_sectors
= nb_sectors
,
4184 if (qemu_in_coroutine()) {
4185 /* Fast-path if already in coroutine context */
4186 bdrv_discard_co_entry(&rwco
);
4188 co
= qemu_coroutine_create(bdrv_discard_co_entry
);
4189 qemu_coroutine_enter(co
, &rwco
);
4190 while (rwco
.ret
== NOT_DONE
) {
4198 /**************************************************************/
4199 /* removable device support */
4202 * Return TRUE if the media is present
4204 int bdrv_is_inserted(BlockDriverState
*bs
)
4206 BlockDriver
*drv
= bs
->drv
;
4210 if (!drv
->bdrv_is_inserted
)
4212 return drv
->bdrv_is_inserted(bs
);
4216 * Return whether the media changed since the last call to this
4217 * function, or -ENOTSUP if we don't know. Most drivers don't know.
4219 int bdrv_media_changed(BlockDriverState
*bs
)
4221 BlockDriver
*drv
= bs
->drv
;
4223 if (drv
&& drv
->bdrv_media_changed
) {
4224 return drv
->bdrv_media_changed(bs
);
4230 * If eject_flag is TRUE, eject the media. Otherwise, close the tray
4232 void bdrv_eject(BlockDriverState
*bs
, bool eject_flag
)
4234 BlockDriver
*drv
= bs
->drv
;
4236 if (drv
&& drv
->bdrv_eject
) {
4237 drv
->bdrv_eject(bs
, eject_flag
);
4240 if (bs
->device_name
[0] != '\0') {
4241 bdrv_emit_qmp_eject_event(bs
, eject_flag
);
4246 * Lock or unlock the media (if it is locked, the user won't be able
4247 * to eject it manually).
4249 void bdrv_lock_medium(BlockDriverState
*bs
, bool locked
)
4251 BlockDriver
*drv
= bs
->drv
;
4253 trace_bdrv_lock_medium(bs
, locked
);
4255 if (drv
&& drv
->bdrv_lock_medium
) {
4256 drv
->bdrv_lock_medium(bs
, locked
);
4260 /* needed for generic scsi interface */
4262 int bdrv_ioctl(BlockDriverState
*bs
, unsigned long int req
, void *buf
)
4264 BlockDriver
*drv
= bs
->drv
;
4266 if (drv
&& drv
->bdrv_ioctl
)
4267 return drv
->bdrv_ioctl(bs
, req
, buf
);
4271 BlockDriverAIOCB
*bdrv_aio_ioctl(BlockDriverState
*bs
,
4272 unsigned long int req
, void *buf
,
4273 BlockDriverCompletionFunc
*cb
, void *opaque
)
4275 BlockDriver
*drv
= bs
->drv
;
4277 if (drv
&& drv
->bdrv_aio_ioctl
)
4278 return drv
->bdrv_aio_ioctl(bs
, req
, buf
, cb
, opaque
);
4282 void bdrv_set_buffer_alignment(BlockDriverState
*bs
, int align
)
4284 bs
->buffer_alignment
= align
;
4287 void *qemu_blockalign(BlockDriverState
*bs
, size_t size
)
4289 return qemu_memalign((bs
&& bs
->buffer_alignment
) ? bs
->buffer_alignment
: 512, size
);
4293 * Check if all memory in this vector is sector aligned.
4295 bool bdrv_qiov_is_aligned(BlockDriverState
*bs
, QEMUIOVector
*qiov
)
4299 for (i
= 0; i
< qiov
->niov
; i
++) {
4300 if ((uintptr_t) qiov
->iov
[i
].iov_base
% bs
->buffer_alignment
) {
4308 void bdrv_set_dirty_tracking(BlockDriverState
*bs
, int granularity
)
4310 int64_t bitmap_size
;
4312 assert((granularity
& (granularity
- 1)) == 0);
4315 granularity
>>= BDRV_SECTOR_BITS
;
4316 assert(!bs
->dirty_bitmap
);
4317 bitmap_size
= (bdrv_getlength(bs
) >> BDRV_SECTOR_BITS
);
4318 bs
->dirty_bitmap
= hbitmap_alloc(bitmap_size
, ffs(granularity
) - 1);
4320 if (bs
->dirty_bitmap
) {
4321 hbitmap_free(bs
->dirty_bitmap
);
4322 bs
->dirty_bitmap
= NULL
;
4327 int bdrv_get_dirty(BlockDriverState
*bs
, int64_t sector
)
4329 if (bs
->dirty_bitmap
) {
4330 return hbitmap_get(bs
->dirty_bitmap
, sector
);
4336 void bdrv_dirty_iter_init(BlockDriverState
*bs
, HBitmapIter
*hbi
)
4338 hbitmap_iter_init(hbi
, bs
->dirty_bitmap
, 0);
4341 void bdrv_set_dirty(BlockDriverState
*bs
, int64_t cur_sector
,
4344 hbitmap_set(bs
->dirty_bitmap
, cur_sector
, nr_sectors
);
4347 void bdrv_reset_dirty(BlockDriverState
*bs
, int64_t cur_sector
,
4350 hbitmap_reset(bs
->dirty_bitmap
, cur_sector
, nr_sectors
);
4353 int64_t bdrv_get_dirty_count(BlockDriverState
*bs
)
4355 if (bs
->dirty_bitmap
) {
4356 return hbitmap_count(bs
->dirty_bitmap
);
4362 void bdrv_set_in_use(BlockDriverState
*bs
, int in_use
)
4364 assert(bs
->in_use
!= in_use
);
4365 bs
->in_use
= in_use
;
4368 int bdrv_in_use(BlockDriverState
*bs
)
4373 void bdrv_iostatus_enable(BlockDriverState
*bs
)
4375 bs
->iostatus_enabled
= true;
4376 bs
->iostatus
= BLOCK_DEVICE_IO_STATUS_OK
;
4379 /* The I/O status is only enabled if the drive explicitly
4380 * enables it _and_ the VM is configured to stop on errors */
4381 bool bdrv_iostatus_is_enabled(const BlockDriverState
*bs
)
4383 return (bs
->iostatus_enabled
&&
4384 (bs
->on_write_error
== BLOCKDEV_ON_ERROR_ENOSPC
||
4385 bs
->on_write_error
== BLOCKDEV_ON_ERROR_STOP
||
4386 bs
->on_read_error
== BLOCKDEV_ON_ERROR_STOP
));
4389 void bdrv_iostatus_disable(BlockDriverState
*bs
)
4391 bs
->iostatus_enabled
= false;
4394 void bdrv_iostatus_reset(BlockDriverState
*bs
)
4396 if (bdrv_iostatus_is_enabled(bs
)) {
4397 bs
->iostatus
= BLOCK_DEVICE_IO_STATUS_OK
;
4399 block_job_iostatus_reset(bs
->job
);
4404 void bdrv_iostatus_set_err(BlockDriverState
*bs
, int error
)
4406 assert(bdrv_iostatus_is_enabled(bs
));
4407 if (bs
->iostatus
== BLOCK_DEVICE_IO_STATUS_OK
) {
4408 bs
->iostatus
= error
== ENOSPC
? BLOCK_DEVICE_IO_STATUS_NOSPACE
:
4409 BLOCK_DEVICE_IO_STATUS_FAILED
;
4414 bdrv_acct_start(BlockDriverState
*bs
, BlockAcctCookie
*cookie
, int64_t bytes
,
4415 enum BlockAcctType type
)
4417 assert(type
< BDRV_MAX_IOTYPE
);
4419 cookie
->bytes
= bytes
;
4420 cookie
->start_time_ns
= get_clock();
4421 cookie
->type
= type
;
4425 bdrv_acct_done(BlockDriverState
*bs
, BlockAcctCookie
*cookie
)
4427 assert(cookie
->type
< BDRV_MAX_IOTYPE
);
4429 bs
->nr_bytes
[cookie
->type
] += cookie
->bytes
;
4430 bs
->nr_ops
[cookie
->type
]++;
4431 bs
->total_time_ns
[cookie
->type
] += get_clock() - cookie
->start_time_ns
;
4434 void bdrv_img_create(const char *filename
, const char *fmt
,
4435 const char *base_filename
, const char *base_fmt
,
4436 char *options
, uint64_t img_size
, int flags
,
4437 Error
**errp
, bool quiet
)
4439 QEMUOptionParameter
*param
= NULL
, *create_options
= NULL
;
4440 QEMUOptionParameter
*backing_fmt
, *backing_file
, *size
;
4441 BlockDriverState
*bs
= NULL
;
4442 BlockDriver
*drv
, *proto_drv
;
4443 BlockDriver
*backing_drv
= NULL
;
4446 /* Find driver and parse its options */
4447 drv
= bdrv_find_format(fmt
);
4449 error_setg(errp
, "Unknown file format '%s'", fmt
);
4453 proto_drv
= bdrv_find_protocol(filename
);
4455 error_setg(errp
, "Unknown protocol '%s'", filename
);
4459 create_options
= append_option_parameters(create_options
,
4460 drv
->create_options
);
4461 create_options
= append_option_parameters(create_options
,
4462 proto_drv
->create_options
);
4464 /* Create parameter list with default values */
4465 param
= parse_option_parameters("", create_options
, param
);
4467 set_option_parameter_int(param
, BLOCK_OPT_SIZE
, img_size
);
4469 /* Parse -o options */
4471 param
= parse_option_parameters(options
, create_options
, param
);
4472 if (param
== NULL
) {
4473 error_setg(errp
, "Invalid options for file format '%s'.", fmt
);
4478 if (base_filename
) {
4479 if (set_option_parameter(param
, BLOCK_OPT_BACKING_FILE
,
4481 error_setg(errp
, "Backing file not supported for file format '%s'",
4488 if (set_option_parameter(param
, BLOCK_OPT_BACKING_FMT
, base_fmt
)) {
4489 error_setg(errp
, "Backing file format not supported for file "
4490 "format '%s'", fmt
);
4495 backing_file
= get_option_parameter(param
, BLOCK_OPT_BACKING_FILE
);
4496 if (backing_file
&& backing_file
->value
.s
) {
4497 if (!strcmp(filename
, backing_file
->value
.s
)) {
4498 error_setg(errp
, "Error: Trying to create an image with the "
4499 "same filename as the backing file");
4504 backing_fmt
= get_option_parameter(param
, BLOCK_OPT_BACKING_FMT
);
4505 if (backing_fmt
&& backing_fmt
->value
.s
) {
4506 backing_drv
= bdrv_find_format(backing_fmt
->value
.s
);
4508 error_setg(errp
, "Unknown backing file format '%s'",
4509 backing_fmt
->value
.s
);
4514 // The size for the image must always be specified, with one exception:
4515 // If we are using a backing file, we can obtain the size from there
4516 size
= get_option_parameter(param
, BLOCK_OPT_SIZE
);
4517 if (size
&& size
->value
.n
== -1) {
4518 if (backing_file
&& backing_file
->value
.s
) {
4523 /* backing files always opened read-only */
4525 flags
& ~(BDRV_O_RDWR
| BDRV_O_SNAPSHOT
| BDRV_O_NO_BACKING
);
4529 ret
= bdrv_open(bs
, backing_file
->value
.s
, NULL
, back_flags
,
4532 error_setg_errno(errp
, -ret
, "Could not open '%s'",
4533 backing_file
->value
.s
);
4536 bdrv_get_geometry(bs
, &size
);
4539 snprintf(buf
, sizeof(buf
), "%" PRId64
, size
);
4540 set_option_parameter(param
, BLOCK_OPT_SIZE
, buf
);
4542 error_setg(errp
, "Image creation needs a size parameter");
4548 printf("Formatting '%s', fmt=%s ", filename
, fmt
);
4549 print_option_parameters(param
);
4552 ret
= bdrv_create(drv
, filename
, param
);
4554 if (ret
== -ENOTSUP
) {
4555 error_setg(errp
,"Formatting or formatting option not supported for "
4556 "file format '%s'", fmt
);
4557 } else if (ret
== -EFBIG
) {
4558 const char *cluster_size_hint
= "";
4559 if (get_option_parameter(create_options
, BLOCK_OPT_CLUSTER_SIZE
)) {
4560 cluster_size_hint
= " (try using a larger cluster size)";
4562 error_setg(errp
, "The image size is too large for file format '%s'%s",
4563 fmt
, cluster_size_hint
);
4565 error_setg(errp
, "%s: error while creating %s: %s", filename
, fmt
,
4571 free_option_parameters(create_options
);
4572 free_option_parameters(param
);
4579 AioContext
*bdrv_get_aio_context(BlockDriverState
*bs
)
4581 /* Currently BlockDriverState always uses the main loop AioContext */
4582 return qemu_get_aio_context();