hw/alpha_dp264.c

   1 /*
   2  * QEMU Alpha DP264/CLIPPER hardware system emulator.
   3  *
   4  * Choose CLIPPER IRQ mappings over, say, DP264, MONET, or WEBBRICK
   5  * variants because CLIPPER doesn't have an SMC669 SuperIO controller
   6  * that we need to emulate as well.
   7  */
   8
   9 #include "hw.h"
  10 #include "elf.h"
  11 #include "loader.h"
  12 #include "boards.h"
  13 #include "alpha_sys.h"
  14 #include "sysemu/sysemu.h"
  15 #include "mc146818rtc.h"
  16 #include "ide.h"
  17 #include "i8254.h"
  18 #include "serial.h"
  19
  20 #define MAX_IDE_BUS 2
  21
  22 static uint64_t cpu_alpha_superpage_to_phys(void *opaque, uint64_t addr)
  23 {
  24     if (((addr >> 41) & 3) == 2) {
  25         addr &= 0xffffffffffull;
  26     }
  27     return addr;
  28 }
  29
  30 /* Note that there are at least 3 viewpoints of IRQ numbers on Alpha systems.
  31     (0) The dev_irq_n lines into the cpu, which we totally ignore,
  32     (1) The DRIR lines in the typhoon chipset,
  33     (2) The "vector" aka mangled interrupt number reported by SRM PALcode,
  34     (3) The interrupt number assigned by the kernel.
  35    The following function is concerned with (1) only.  */
  36
  37 static int clipper_pci_map_irq(PCIDevice *d, int irq_num)
  38 {
  39     int slot = d->devfn >> 3;
  40
  41     assert(irq_num >= 0 && irq_num <= 3);
  42
  43     return (slot + 1) * 4 + irq_num;
  44 }
  45
  46 static void clipper_init(QEMUMachineInitArgs *args)
  47 {
  48     ram_addr_t ram_size = args->ram_size;
  49     const char *cpu_model = args->cpu_model;
  50     const char *kernel_filename = args->kernel_filename;
  51     const char *kernel_cmdline = args->kernel_cmdline;
  52     const char *initrd_filename = args->initrd_filename;
  53     AlphaCPU *cpus[4];
  54     PCIBus *pci_bus;
  55     ISABus *isa_bus;
  56     qemu_irq rtc_irq;
  57     long size, i;
  58     const char *palcode_filename;
  59     uint64_t palcode_entry, palcode_low, palcode_high;
  60     uint64_t kernel_entry, kernel_low, kernel_high;
  61
  62     /* Create up to 4 cpus.  */
  63     memset(cpus, 0, sizeof(cpus));
  64     for (i = 0; i < smp_cpus; ++i) {
  65         cpus[i] = cpu_alpha_init(cpu_model ? cpu_model : "ev67");
  66     }
  67
  68     cpus[0]->env.trap_arg0 = ram_size;
  69     cpus[0]->env.trap_arg1 = 0;
  70     cpus[0]->env.trap_arg2 = smp_cpus;
  71
  72     /* Init the chipset.  */
  73     pci_bus = typhoon_init(ram_size, &isa_bus, &rtc_irq, cpus,
  74                            clipper_pci_map_irq);
  75
  76     rtc_init(isa_bus, 1980, rtc_irq);
  77     pit_init(isa_bus, 0x40, 0, NULL);
  78     isa_create_simple(isa_bus, "i8042");
  79
  80     /* VGA setup.  Don't bother loading the bios.  */
  81     pci_vga_init(pci_bus);
  82
  83     /* Serial code setup.  */
  84     for (i = 0; i < MAX_SERIAL_PORTS; ++i) {
  85         if (serial_hds[i]) {
  86             serial_isa_init(isa_bus, i, serial_hds[i]);
  87         }
  88     }
  89
  90     /* Network setup.  e1000 is good enough, failing Tulip support.  */
  91     for (i = 0; i < nb_nics; i++) {
  92         pci_nic_init_nofail(&nd_table[i], "e1000", NULL);
  93     }
  94
  95     /* IDE disk setup.  */
  96     {
  97         DriveInfo *hd[MAX_IDE_BUS * MAX_IDE_DEVS];
  98         ide_drive_get(hd, MAX_IDE_BUS);
  99
 100         pci_cmd646_ide_init(pci_bus, hd, 0);
 101     }
 102
 103     /* Load PALcode.  Given that this is not "real" cpu palcode,
 104        but one explicitly written for the emulation, we might as
 105        well load it directly from and ELF image.  */
 106     palcode_filename = (bios_name ? bios_name : "palcode-clipper");
 107     palcode_filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, palcode_filename);
 108     if (palcode_filename == NULL) {
 109         hw_error("no palcode provided\n");
 110         exit(1);
 111     }
 112     size = load_elf(palcode_filename, cpu_alpha_superpage_to_phys,
 113                     NULL, &palcode_entry, &palcode_low, &palcode_high,
 114                     0, EM_ALPHA, 0);
 115     if (size < 0) {
 116         hw_error("could not load palcode '%s'\n", palcode_filename);
 117         exit(1);
 118     }
 119
 120     /* Start all cpus at the PALcode RESET entry point.  */
 121     for (i = 0; i < smp_cpus; ++i) {
 122         cpus[i]->env.pal_mode = 1;
 123         cpus[i]->env.pc = palcode_entry;
 124         cpus[i]->env.palbr = palcode_entry;
 125     }
 126
 127     /* Load a kernel.  */
 128     if (kernel_filename) {
 129         uint64_t param_offset;
 130
 131         size = load_elf(kernel_filename, cpu_alpha_superpage_to_phys,
 132                         NULL, &kernel_entry, &kernel_low, &kernel_high,
 133                         0, EM_ALPHA, 0);
 134         if (size < 0) {
 135             hw_error("could not load kernel '%s'\n", kernel_filename);
 136             exit(1);
 137         }
 138
 139         cpus[0]->env.trap_arg1 = kernel_entry;
 140
 141         param_offset = kernel_low - 0x6000;
 142
 143         if (kernel_cmdline) {
 144             pstrcpy_targphys("cmdline", param_offset, 0x100, kernel_cmdline);
 145         }
 146
 147         if (initrd_filename) {
 148             long initrd_base, initrd_size;
 149
 150             initrd_size = get_image_size(initrd_filename);
 151             if (initrd_size < 0) {
 152                 hw_error("could not load initial ram disk '%s'\n",
 153                          initrd_filename);
 154                 exit(1);
 155             }
 156
 157             /* Put the initrd image as high in memory as possible.  */
 158             initrd_base = (ram_size - initrd_size) & TARGET_PAGE_MASK;
 159             load_image_targphys(initrd_filename, initrd_base,
 160                                 ram_size - initrd_base);
 161
 162             stq_phys(param_offset + 0x100, initrd_base + 0xfffffc0000000000ULL);
 163             stq_phys(param_offset + 0x108, initrd_size);
 164         }
 165     }
 166 }
 167
 168 static QEMUMachine clipper_machine = {
 169     .name = "clipper",
 170     .desc = "Alpha DP264/CLIPPER",
 171     .init = clipper_init,
 172     .max_cpus = 4,
 173     .is_default = 1,
 174     DEFAULT_MACHINE_OPTIONS,
 175 };
 176
 177 static void clipper_machine_init(void)
 178 {
 179     qemu_register_machine(&clipper_machine);
 180 }
 181
 182 machine_init(clipper_machine_init);