Refactor signal setup functions in cpus.c
[qemu.git] / hw / slavio_intctl.c
bloba83e5b8272360e6176b7b377c73f3ded51c2e983
1 /*
2 * QEMU Sparc SLAVIO interrupt controller emulation
4 * Copyright (c) 2003-2005 Fabrice Bellard
6 * Permission is hereby granted, free of charge, to any person obtaining a copy
7 * of this software and associated documentation files (the "Software"), to deal
8 * in the Software without restriction, including without limitation the rights
9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10 * copies of the Software, and to permit persons to whom the Software is
11 * furnished to do so, subject to the following conditions:
13 * The above copyright notice and this permission notice shall be included in
14 * all copies or substantial portions of the Software.
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
22 * THE SOFTWARE.
25 #include "sun4m.h"
26 #include "monitor.h"
27 #include "sysbus.h"
28 #include "trace.h"
30 //#define DEBUG_IRQ_COUNT
33 * Registers of interrupt controller in sun4m.
35 * This is the interrupt controller part of chip STP2001 (Slave I/O), also
36 * produced as NCR89C105. See
37 * http://www.ibiblio.org/pub/historic-linux/early-ports/Sparc/NCR/NCR89C105.txt
39 * There is a system master controller and one for each cpu.
43 #define MAX_CPUS 16
44 #define MAX_PILS 16
46 struct SLAVIO_INTCTLState;
48 typedef struct SLAVIO_CPUINTCTLState {
49 uint32_t intreg_pending;
50 struct SLAVIO_INTCTLState *master;
51 uint32_t cpu;
52 uint32_t irl_out;
53 } SLAVIO_CPUINTCTLState;
55 typedef struct SLAVIO_INTCTLState {
56 SysBusDevice busdev;
57 uint32_t intregm_pending;
58 uint32_t intregm_disabled;
59 uint32_t target_cpu;
60 #ifdef DEBUG_IRQ_COUNT
61 uint64_t irq_count[32];
62 #endif
63 qemu_irq cpu_irqs[MAX_CPUS][MAX_PILS];
64 SLAVIO_CPUINTCTLState slaves[MAX_CPUS];
65 } SLAVIO_INTCTLState;
67 #define INTCTL_MAXADDR 0xf
68 #define INTCTL_SIZE (INTCTL_MAXADDR + 1)
69 #define INTCTLM_SIZE 0x14
70 #define MASTER_IRQ_MASK ~0x0fa2007f
71 #define MASTER_DISABLE 0x80000000
72 #define CPU_SOFTIRQ_MASK 0xfffe0000
73 #define CPU_IRQ_INT15_IN (1 << 15)
74 #define CPU_IRQ_TIMER_IN (1 << 14)
76 static void slavio_check_interrupts(SLAVIO_INTCTLState *s, int set_irqs);
78 // per-cpu interrupt controller
79 static uint32_t slavio_intctl_mem_readl(void *opaque, target_phys_addr_t addr)
81 SLAVIO_CPUINTCTLState *s = opaque;
82 uint32_t saddr, ret;
84 saddr = addr >> 2;
85 switch (saddr) {
86 case 0:
87 ret = s->intreg_pending;
88 break;
89 default:
90 ret = 0;
91 break;
93 trace_slavio_intctl_mem_readl(s->cpu, addr, ret);
95 return ret;
98 static void slavio_intctl_mem_writel(void *opaque, target_phys_addr_t addr,
99 uint32_t val)
101 SLAVIO_CPUINTCTLState *s = opaque;
102 uint32_t saddr;
104 saddr = addr >> 2;
105 trace_slavio_intctl_mem_writel(s->cpu, addr, val);
106 switch (saddr) {
107 case 1: // clear pending softints
108 val &= CPU_SOFTIRQ_MASK | CPU_IRQ_INT15_IN;
109 s->intreg_pending &= ~val;
110 slavio_check_interrupts(s->master, 1);
111 trace_slavio_intctl_mem_writel_clear(s->cpu, val, s->intreg_pending);
112 break;
113 case 2: // set softint
114 val &= CPU_SOFTIRQ_MASK;
115 s->intreg_pending |= val;
116 slavio_check_interrupts(s->master, 1);
117 trace_slavio_intctl_mem_writel_set(s->cpu, val, s->intreg_pending);
118 break;
119 default:
120 break;
124 static CPUReadMemoryFunc * const slavio_intctl_mem_read[3] = {
125 NULL,
126 NULL,
127 slavio_intctl_mem_readl,
130 static CPUWriteMemoryFunc * const slavio_intctl_mem_write[3] = {
131 NULL,
132 NULL,
133 slavio_intctl_mem_writel,
136 // master system interrupt controller
137 static uint32_t slavio_intctlm_mem_readl(void *opaque, target_phys_addr_t addr)
139 SLAVIO_INTCTLState *s = opaque;
140 uint32_t saddr, ret;
142 saddr = addr >> 2;
143 switch (saddr) {
144 case 0:
145 ret = s->intregm_pending & ~MASTER_DISABLE;
146 break;
147 case 1:
148 ret = s->intregm_disabled & MASTER_IRQ_MASK;
149 break;
150 case 4:
151 ret = s->target_cpu;
152 break;
153 default:
154 ret = 0;
155 break;
157 trace_slavio_intctlm_mem_readl(addr, ret);
159 return ret;
162 static void slavio_intctlm_mem_writel(void *opaque, target_phys_addr_t addr,
163 uint32_t val)
165 SLAVIO_INTCTLState *s = opaque;
166 uint32_t saddr;
168 saddr = addr >> 2;
169 trace_slavio_intctlm_mem_writel(addr, val);
170 switch (saddr) {
171 case 2: // clear (enable)
172 // Force clear unused bits
173 val &= MASTER_IRQ_MASK;
174 s->intregm_disabled &= ~val;
175 trace_slavio_intctlm_mem_writel_enable(val, s->intregm_disabled);
176 slavio_check_interrupts(s, 1);
177 break;
178 case 3: // set (disable; doesn't affect pending)
179 // Force clear unused bits
180 val &= MASTER_IRQ_MASK;
181 s->intregm_disabled |= val;
182 slavio_check_interrupts(s, 1);
183 trace_slavio_intctlm_mem_writel_disable(val, s->intregm_disabled);
184 break;
185 case 4:
186 s->target_cpu = val & (MAX_CPUS - 1);
187 slavio_check_interrupts(s, 1);
188 trace_slavio_intctlm_mem_writel_target(s->target_cpu);
189 break;
190 default:
191 break;
195 static CPUReadMemoryFunc * const slavio_intctlm_mem_read[3] = {
196 NULL,
197 NULL,
198 slavio_intctlm_mem_readl,
201 static CPUWriteMemoryFunc * const slavio_intctlm_mem_write[3] = {
202 NULL,
203 NULL,
204 slavio_intctlm_mem_writel,
207 void slavio_pic_info(Monitor *mon, DeviceState *dev)
209 SysBusDevice *sd;
210 SLAVIO_INTCTLState *s;
211 int i;
213 sd = sysbus_from_qdev(dev);
214 s = FROM_SYSBUS(SLAVIO_INTCTLState, sd);
215 for (i = 0; i < MAX_CPUS; i++) {
216 monitor_printf(mon, "per-cpu %d: pending 0x%08x\n", i,
217 s->slaves[i].intreg_pending);
219 monitor_printf(mon, "master: pending 0x%08x, disabled 0x%08x\n",
220 s->intregm_pending, s->intregm_disabled);
223 void slavio_irq_info(Monitor *mon, DeviceState *dev)
225 #ifndef DEBUG_IRQ_COUNT
226 monitor_printf(mon, "irq statistic code not compiled.\n");
227 #else
228 SysBusDevice *sd;
229 SLAVIO_INTCTLState *s;
230 int i;
231 int64_t count;
233 sd = sysbus_from_qdev(dev);
234 s = FROM_SYSBUS(SLAVIO_INTCTLState, sd);
235 monitor_printf(mon, "IRQ statistics:\n");
236 for (i = 0; i < 32; i++) {
237 count = s->irq_count[i];
238 if (count > 0)
239 monitor_printf(mon, "%2d: %" PRId64 "\n", i, count);
241 #endif
244 static const uint32_t intbit_to_level[] = {
245 2, 3, 5, 7, 9, 11, 13, 2, 3, 5, 7, 9, 11, 13, 12, 12,
246 6, 13, 4, 10, 8, 9, 11, 0, 0, 0, 0, 15, 15, 15, 15, 0,
249 static void slavio_check_interrupts(SLAVIO_INTCTLState *s, int set_irqs)
251 uint32_t pending = s->intregm_pending, pil_pending;
252 unsigned int i, j;
254 pending &= ~s->intregm_disabled;
256 trace_slavio_check_interrupts(pending, s->intregm_disabled);
257 for (i = 0; i < MAX_CPUS; i++) {
258 pil_pending = 0;
260 /* If we are the current interrupt target, get hard interrupts */
261 if (pending && !(s->intregm_disabled & MASTER_DISABLE) &&
262 (i == s->target_cpu)) {
263 for (j = 0; j < 32; j++) {
264 if ((pending & (1 << j)) && intbit_to_level[j]) {
265 pil_pending |= 1 << intbit_to_level[j];
270 /* Calculate current pending hard interrupts for display */
271 s->slaves[i].intreg_pending &= CPU_SOFTIRQ_MASK | CPU_IRQ_INT15_IN |
272 CPU_IRQ_TIMER_IN;
273 if (i == s->target_cpu) {
274 for (j = 0; j < 32; j++) {
275 if ((s->intregm_pending & (1 << j)) && intbit_to_level[j]) {
276 s->slaves[i].intreg_pending |= 1 << intbit_to_level[j];
281 /* Level 15 and CPU timer interrupts are only masked when
282 the MASTER_DISABLE bit is set */
283 if (!(s->intregm_disabled & MASTER_DISABLE)) {
284 pil_pending |= s->slaves[i].intreg_pending &
285 (CPU_IRQ_INT15_IN | CPU_IRQ_TIMER_IN);
288 /* Add soft interrupts */
289 pil_pending |= (s->slaves[i].intreg_pending & CPU_SOFTIRQ_MASK) >> 16;
291 if (set_irqs) {
292 /* Since there is not really an interrupt 0 (and pil_pending
293 * and irl_out bit zero are thus always zero) there is no need
294 * to do anything with cpu_irqs[i][0] and it is OK not to do
295 * the j=0 iteration of this loop.
297 for (j = MAX_PILS-1; j > 0; j--) {
298 if (pil_pending & (1 << j)) {
299 if (!(s->slaves[i].irl_out & (1 << j))) {
300 qemu_irq_raise(s->cpu_irqs[i][j]);
302 } else {
303 if (s->slaves[i].irl_out & (1 << j)) {
304 qemu_irq_lower(s->cpu_irqs[i][j]);
309 s->slaves[i].irl_out = pil_pending;
314 * "irq" here is the bit number in the system interrupt register to
315 * separate serial and keyboard interrupts sharing a level.
317 static void slavio_set_irq(void *opaque, int irq, int level)
319 SLAVIO_INTCTLState *s = opaque;
320 uint32_t mask = 1 << irq;
321 uint32_t pil = intbit_to_level[irq];
322 unsigned int i;
324 trace_slavio_set_irq(s->target_cpu, irq, pil, level);
325 if (pil > 0) {
326 if (level) {
327 #ifdef DEBUG_IRQ_COUNT
328 s->irq_count[pil]++;
329 #endif
330 s->intregm_pending |= mask;
331 if (pil == 15) {
332 for (i = 0; i < MAX_CPUS; i++) {
333 s->slaves[i].intreg_pending |= 1 << pil;
336 } else {
337 s->intregm_pending &= ~mask;
338 if (pil == 15) {
339 for (i = 0; i < MAX_CPUS; i++) {
340 s->slaves[i].intreg_pending &= ~(1 << pil);
344 slavio_check_interrupts(s, 1);
348 static void slavio_set_timer_irq_cpu(void *opaque, int cpu, int level)
350 SLAVIO_INTCTLState *s = opaque;
352 trace_slavio_set_timer_irq_cpu(cpu, level);
354 if (level) {
355 s->slaves[cpu].intreg_pending |= CPU_IRQ_TIMER_IN;
356 } else {
357 s->slaves[cpu].intreg_pending &= ~CPU_IRQ_TIMER_IN;
360 slavio_check_interrupts(s, 1);
363 static void slavio_set_irq_all(void *opaque, int irq, int level)
365 if (irq < 32) {
366 slavio_set_irq(opaque, irq, level);
367 } else {
368 slavio_set_timer_irq_cpu(opaque, irq - 32, level);
372 static int vmstate_intctl_post_load(void *opaque, int version_id)
374 SLAVIO_INTCTLState *s = opaque;
376 slavio_check_interrupts(s, 0);
377 return 0;
380 static const VMStateDescription vmstate_intctl_cpu = {
381 .name ="slavio_intctl_cpu",
382 .version_id = 1,
383 .minimum_version_id = 1,
384 .minimum_version_id_old = 1,
385 .fields = (VMStateField []) {
386 VMSTATE_UINT32(intreg_pending, SLAVIO_CPUINTCTLState),
387 VMSTATE_END_OF_LIST()
391 static const VMStateDescription vmstate_intctl = {
392 .name ="slavio_intctl",
393 .version_id = 1,
394 .minimum_version_id = 1,
395 .minimum_version_id_old = 1,
396 .post_load = vmstate_intctl_post_load,
397 .fields = (VMStateField []) {
398 VMSTATE_STRUCT_ARRAY(slaves, SLAVIO_INTCTLState, MAX_CPUS, 1,
399 vmstate_intctl_cpu, SLAVIO_CPUINTCTLState),
400 VMSTATE_UINT32(intregm_pending, SLAVIO_INTCTLState),
401 VMSTATE_UINT32(intregm_disabled, SLAVIO_INTCTLState),
402 VMSTATE_UINT32(target_cpu, SLAVIO_INTCTLState),
403 VMSTATE_END_OF_LIST()
407 static void slavio_intctl_reset(DeviceState *d)
409 SLAVIO_INTCTLState *s = container_of(d, SLAVIO_INTCTLState, busdev.qdev);
410 int i;
412 for (i = 0; i < MAX_CPUS; i++) {
413 s->slaves[i].intreg_pending = 0;
414 s->slaves[i].irl_out = 0;
416 s->intregm_disabled = ~MASTER_IRQ_MASK;
417 s->intregm_pending = 0;
418 s->target_cpu = 0;
419 slavio_check_interrupts(s, 0);
422 static int slavio_intctl_init1(SysBusDevice *dev)
424 SLAVIO_INTCTLState *s = FROM_SYSBUS(SLAVIO_INTCTLState, dev);
425 int io_memory;
426 unsigned int i, j;
428 qdev_init_gpio_in(&dev->qdev, slavio_set_irq_all, 32 + MAX_CPUS);
429 io_memory = cpu_register_io_memory(slavio_intctlm_mem_read,
430 slavio_intctlm_mem_write, s,
431 DEVICE_NATIVE_ENDIAN);
432 sysbus_init_mmio(dev, INTCTLM_SIZE, io_memory);
434 for (i = 0; i < MAX_CPUS; i++) {
435 for (j = 0; j < MAX_PILS; j++) {
436 sysbus_init_irq(dev, &s->cpu_irqs[i][j]);
438 io_memory = cpu_register_io_memory(slavio_intctl_mem_read,
439 slavio_intctl_mem_write,
440 &s->slaves[i],
441 DEVICE_NATIVE_ENDIAN);
442 sysbus_init_mmio(dev, INTCTL_SIZE, io_memory);
443 s->slaves[i].cpu = i;
444 s->slaves[i].master = s;
447 return 0;
450 static SysBusDeviceInfo slavio_intctl_info = {
451 .init = slavio_intctl_init1,
452 .qdev.name = "slavio_intctl",
453 .qdev.size = sizeof(SLAVIO_INTCTLState),
454 .qdev.vmsd = &vmstate_intctl,
455 .qdev.reset = slavio_intctl_reset,
458 static void slavio_intctl_register_devices(void)
460 sysbus_register_withprop(&slavio_intctl_info);
463 device_init(slavio_intctl_register_devices)