Add VMState support for ptimers
[qemu.git] / hw / syborg_virtio.c
blobc1faf3d1a0f98128cbaa5332a9405cf73e339eec
1 /*
2 * Virtio Syborg bindings
4 * Copyright (c) 2009 CodeSourcery
6 * Permission is hereby granted, free of charge, to any person obtaining a copy
7 * of this software and associated documentation files (the "Software"), to deal
8 * in the Software without restriction, including without limitation the rights
9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10 * copies of the Software, and to permit persons to whom the Software is
11 * furnished to do so, subject to the following conditions:
13 * The above copyright notice and this permission notice shall be included in
14 * all copies or substantial portions of the Software.
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
22 * THE SOFTWARE.
25 #include "syborg.h"
26 #include "sysbus.h"
27 #include "virtio.h"
28 #include "sysemu.h"
30 //#define DEBUG_SYBORG_VIRTIO
32 #ifdef DEBUG_SYBORG_VIRTIO
33 #define DPRINTF(fmt, ...) \
34 do { printf("syborg_virtio: " fmt , ## __VA_ARGS__); } while (0)
35 #define BADF(fmt, ...) \
36 do { fprintf(stderr, "syborg_virtio: error: " fmt , ## __VA_ARGS__); \
37 exit(1);} while (0)
38 #else
39 #define DPRINTF(fmt, ...) do {} while(0)
40 #define BADF(fmt, ...) \
41 do { fprintf(stderr, "syborg_virtio: error: " fmt , ## __VA_ARGS__);} while (0)
42 #endif
44 enum {
45 SYBORG_VIRTIO_ID = 0,
46 SYBORG_VIRTIO_DEVTYPE = 1,
47 SYBORG_VIRTIO_HOST_FEATURES = 2,
48 SYBORG_VIRTIO_GUEST_FEATURES = 3,
49 SYBORG_VIRTIO_QUEUE_BASE = 4,
50 SYBORG_VIRTIO_QUEUE_NUM = 5,
51 SYBORG_VIRTIO_QUEUE_SEL = 6,
52 SYBORG_VIRTIO_QUEUE_NOTIFY = 7,
53 SYBORG_VIRTIO_STATUS = 8,
54 SYBORG_VIRTIO_INT_ENABLE = 9,
55 SYBORG_VIRTIO_INT_STATUS = 10
58 #define SYBORG_VIRTIO_CONFIG 0x100
60 /* Device independent interface. */
62 typedef struct {
63 SysBusDevice busdev;
64 VirtIODevice *vdev;
65 qemu_irq irq;
66 uint32_t int_enable;
67 uint32_t id;
68 } SyborgVirtIOProxy;
70 static uint32_t syborg_virtio_readl(void *opaque, target_phys_addr_t offset)
72 SyborgVirtIOProxy *s = opaque;
73 VirtIODevice *vdev = s->vdev;
74 uint32_t ret;
76 DPRINTF("readl 0x%x\n", (int)offset);
77 if (offset >= SYBORG_VIRTIO_CONFIG) {
78 return virtio_config_readl(vdev, offset - SYBORG_VIRTIO_CONFIG);
80 switch(offset >> 2) {
81 case SYBORG_VIRTIO_ID:
82 ret = SYBORG_ID_VIRTIO;
83 break;
84 case SYBORG_VIRTIO_DEVTYPE:
85 ret = s->id;
86 break;
87 case SYBORG_VIRTIO_HOST_FEATURES:
88 ret = vdev->get_features(vdev);
89 ret |= (1 << VIRTIO_F_NOTIFY_ON_EMPTY);
90 break;
91 case SYBORG_VIRTIO_GUEST_FEATURES:
92 ret = vdev->features;
93 break;
94 case SYBORG_VIRTIO_QUEUE_BASE:
95 ret = virtio_queue_get_addr(vdev, vdev->queue_sel);
96 break;
97 case SYBORG_VIRTIO_QUEUE_NUM:
98 ret = virtio_queue_get_num(vdev, vdev->queue_sel);
99 break;
100 case SYBORG_VIRTIO_QUEUE_SEL:
101 ret = vdev->queue_sel;
102 break;
103 case SYBORG_VIRTIO_STATUS:
104 ret = vdev->status;
105 break;
106 case SYBORG_VIRTIO_INT_ENABLE:
107 ret = s->int_enable;
108 break;
109 case SYBORG_VIRTIO_INT_STATUS:
110 ret = vdev->isr;
111 break;
112 default:
113 BADF("Bad read offset 0x%x\n", (int)offset);
114 return 0;
116 return ret;
119 static void syborg_virtio_writel(void *opaque, target_phys_addr_t offset,
120 uint32_t value)
122 SyborgVirtIOProxy *s = opaque;
123 VirtIODevice *vdev = s->vdev;
125 DPRINTF("writel 0x%x = 0x%x\n", (int)offset, value);
126 if (offset >= SYBORG_VIRTIO_CONFIG) {
127 return virtio_config_writel(vdev, offset - SYBORG_VIRTIO_CONFIG,
128 value);
130 switch (offset >> 2) {
131 case SYBORG_VIRTIO_GUEST_FEATURES:
132 if (vdev->set_features)
133 vdev->set_features(vdev, value);
134 vdev->features = value;
135 break;
136 case SYBORG_VIRTIO_QUEUE_BASE:
137 if (value == 0)
138 virtio_reset(vdev);
139 else
140 virtio_queue_set_addr(vdev, vdev->queue_sel, value);
141 break;
142 case SYBORG_VIRTIO_QUEUE_SEL:
143 if (value < VIRTIO_PCI_QUEUE_MAX)
144 vdev->queue_sel = value;
145 break;
146 case SYBORG_VIRTIO_QUEUE_NOTIFY:
147 virtio_queue_notify(vdev, value);
148 break;
149 case SYBORG_VIRTIO_STATUS:
150 vdev->status = value & 0xFF;
151 if (vdev->status == 0)
152 virtio_reset(vdev);
153 break;
154 case SYBORG_VIRTIO_INT_ENABLE:
155 s->int_enable = value;
156 virtio_update_irq(vdev);
157 break;
158 case SYBORG_VIRTIO_INT_STATUS:
159 vdev->isr &= ~value;
160 virtio_update_irq(vdev);
161 break;
162 default:
163 BADF("Bad write offset 0x%x\n", (int)offset);
164 break;
168 static uint32_t syborg_virtio_readw(void *opaque, target_phys_addr_t offset)
170 SyborgVirtIOProxy *s = opaque;
171 VirtIODevice *vdev = s->vdev;
173 DPRINTF("readw 0x%x\n", (int)offset);
174 if (offset >= SYBORG_VIRTIO_CONFIG) {
175 return virtio_config_readw(vdev, offset - SYBORG_VIRTIO_CONFIG);
177 BADF("Bad halfword read offset 0x%x\n", (int)offset);
178 return -1;
181 static void syborg_virtio_writew(void *opaque, target_phys_addr_t offset,
182 uint32_t value)
184 SyborgVirtIOProxy *s = opaque;
185 VirtIODevice *vdev = s->vdev;
187 DPRINTF("writew 0x%x = 0x%x\n", (int)offset, value);
188 if (offset >= SYBORG_VIRTIO_CONFIG) {
189 return virtio_config_writew(vdev, offset - SYBORG_VIRTIO_CONFIG,
190 value);
192 BADF("Bad halfword write offset 0x%x\n", (int)offset);
195 static uint32_t syborg_virtio_readb(void *opaque, target_phys_addr_t offset)
197 SyborgVirtIOProxy *s = opaque;
198 VirtIODevice *vdev = s->vdev;
200 DPRINTF("readb 0x%x\n", (int)offset);
201 if (offset >= SYBORG_VIRTIO_CONFIG) {
202 return virtio_config_readb(vdev, offset - SYBORG_VIRTIO_CONFIG);
204 BADF("Bad byte read offset 0x%x\n", (int)offset);
205 return -1;
208 static void syborg_virtio_writeb(void *opaque, target_phys_addr_t offset,
209 uint32_t value)
211 SyborgVirtIOProxy *s = opaque;
212 VirtIODevice *vdev = s->vdev;
214 DPRINTF("writeb 0x%x = 0x%x\n", (int)offset, value);
215 if (offset >= SYBORG_VIRTIO_CONFIG) {
216 return virtio_config_writeb(vdev, offset - SYBORG_VIRTIO_CONFIG,
217 value);
219 BADF("Bad byte write offset 0x%x\n", (int)offset);
222 static CPUReadMemoryFunc * const syborg_virtio_readfn[] = {
223 syborg_virtio_readb,
224 syborg_virtio_readw,
225 syborg_virtio_readl
228 static CPUWriteMemoryFunc * const syborg_virtio_writefn[] = {
229 syborg_virtio_writeb,
230 syborg_virtio_writew,
231 syborg_virtio_writel
234 static void syborg_virtio_update_irq(void *opaque, uint16_t vector)
236 SyborgVirtIOProxy *proxy = opaque;
237 int level;
239 level = proxy->int_enable & proxy->vdev->isr;
240 DPRINTF("IRQ %d\n", level);
241 qemu_set_irq(proxy->irq, level != 0);
244 static VirtIOBindings syborg_virtio_bindings = {
245 .notify = syborg_virtio_update_irq
248 static int syborg_virtio_init(SyborgVirtIOProxy *proxy, VirtIODevice *vdev)
250 int iomemtype;
252 proxy->vdev = vdev;
254 /* Don't support multiple vectors */
255 proxy->vdev->nvectors = 0;
256 sysbus_init_irq(&proxy->busdev, &proxy->irq);
257 iomemtype = cpu_register_io_memory(syborg_virtio_readfn,
258 syborg_virtio_writefn, proxy);
259 sysbus_init_mmio(&proxy->busdev, 0x1000, iomemtype);
261 proxy->id = ((uint32_t)0x1af4 << 16) | vdev->device_id;
263 qemu_register_reset(virtio_reset, vdev);
265 virtio_bind_device(vdev, &syborg_virtio_bindings, proxy);
266 return 0;
269 /* Device specific bindings. */
271 static int syborg_virtio_net_init(SysBusDevice *dev)
273 VirtIODevice *vdev;
274 SyborgVirtIOProxy *proxy = FROM_SYSBUS(SyborgVirtIOProxy, dev);
276 vdev = virtio_net_init(&dev->qdev);
277 return syborg_virtio_init(proxy, vdev);
280 static void syborg_virtio_register_devices(void)
282 sysbus_register_dev("syborg,virtio-net", sizeof(SyborgVirtIOProxy),
283 syborg_virtio_net_init);
286 device_init(syborg_virtio_register_devices)