hw/armv7m.c

   1 /*
   2  * ARMV7M System emulation.
   3  *
   4  * Copyright (c) 2006-2007 CodeSourcery.
   5  * Written by Paul Brook
   6  *
   7  * This code is licenced under the GPL.
   8  */
   9
  10 #include "sysbus.h"
  11 #include "arm-misc.h"
  12 #include "sysemu.h"
  13
  14 /* Bitbanded IO.  Each word corresponds to a single bit.  */
  15
  16 /* Get the byte address of the real memory for a bitband acess.  */
  17 static inline uint32_t bitband_addr(void * opaque, uint32_t addr)
  18 {
  19     uint32_t res;
  20
  21     res = *(uint32_t *)opaque;
  22     res |= (addr & 0x1ffffff) >> 5;
  23     return res;
  24
  25 }
  26
  27 static uint32_t bitband_readb(void *opaque, target_phys_addr_t offset)
  28 {
  29     uint8_t v;
  30     cpu_physical_memory_read(bitband_addr(opaque, offset), &v, 1);
  31     return (v & (1 << ((offset >> 2) & 7))) != 0;
  32 }
  33
  34 static void bitband_writeb(void *opaque, target_phys_addr_t offset,
  35                            uint32_t value)
  36 {
  37     uint32_t addr;
  38     uint8_t mask;
  39     uint8_t v;
  40     addr = bitband_addr(opaque, offset);
  41     mask = (1 << ((offset >> 2) & 7));
  42     cpu_physical_memory_read(addr, &v, 1);
  43     if (value & 1)
  44         v |= mask;
  45     else
  46         v &= ~mask;
  47     cpu_physical_memory_write(addr, &v, 1);
  48 }
  49
  50 static uint32_t bitband_readw(void *opaque, target_phys_addr_t offset)
  51 {
  52     uint32_t addr;
  53     uint16_t mask;
  54     uint16_t v;
  55     addr = bitband_addr(opaque, offset) & ~1;
  56     mask = (1 << ((offset >> 2) & 15));
  57     mask = tswap16(mask);
  58     cpu_physical_memory_read(addr, (uint8_t *)&v, 2);
  59     return (v & mask) != 0;
  60 }
  61
  62 static void bitband_writew(void *opaque, target_phys_addr_t offset,
  63                            uint32_t value)
  64 {
  65     uint32_t addr;
  66     uint16_t mask;
  67     uint16_t v;
  68     addr = bitband_addr(opaque, offset) & ~1;
  69     mask = (1 << ((offset >> 2) & 15));
  70     mask = tswap16(mask);
  71     cpu_physical_memory_read(addr, (uint8_t *)&v, 2);
  72     if (value & 1)
  73         v |= mask;
  74     else
  75         v &= ~mask;
  76     cpu_physical_memory_write(addr, (uint8_t *)&v, 2);
  77 }
  78
  79 static uint32_t bitband_readl(void *opaque, target_phys_addr_t offset)
  80 {
  81     uint32_t addr;
  82     uint32_t mask;
  83     uint32_t v;
  84     addr = bitband_addr(opaque, offset) & ~3;
  85     mask = (1 << ((offset >> 2) & 31));
  86     mask = tswap32(mask);
  87     cpu_physical_memory_read(addr, (uint8_t *)&v, 4);
  88     return (v & mask) != 0;
  89 }
  90
  91 static void bitband_writel(void *opaque, target_phys_addr_t offset,
  92                            uint32_t value)
  93 {
  94     uint32_t addr;
  95     uint32_t mask;
  96     uint32_t v;
  97     addr = bitband_addr(opaque, offset) & ~3;
  98     mask = (1 << ((offset >> 2) & 31));
  99     mask = tswap32(mask);
 100     cpu_physical_memory_read(addr, (uint8_t *)&v, 4);
 101     if (value & 1)
 102         v |= mask;
 103     else
 104         v &= ~mask;
 105     cpu_physical_memory_write(addr, (uint8_t *)&v, 4);
 106 }
 107
 108 static CPUReadMemoryFunc * const bitband_readfn[] = {
 109    bitband_readb,
 110    bitband_readw,
 111    bitband_readl
 112 };
 113
 114 static CPUWriteMemoryFunc * const bitband_writefn[] = {
 115    bitband_writeb,
 116    bitband_writew,
 117    bitband_writel
 118 };
 119
 120 typedef struct {
 121     SysBusDevice busdev;
 122     uint32_t base;
 123 } BitBandState;
 124
 125 static int bitband_init(SysBusDevice *dev)
 126 {
 127     BitBandState *s = FROM_SYSBUS(BitBandState, dev);
 128     int iomemtype;
 129
 130     iomemtype = cpu_register_io_memory(bitband_readfn, bitband_writefn,
 131                                        &s->base);
 132     sysbus_init_mmio(dev, 0x02000000, iomemtype);
 133     return 0;
 134 }
 135
 136 static void armv7m_bitband_init(void)
 137 {
 138     DeviceState *dev;
 139
 140     dev = qdev_create(NULL, "ARM,bitband-memory");
 141     qdev_prop_set_uint32(dev, "base", 0x20000000);
 142     qdev_init(dev);
 143     sysbus_mmio_map(sysbus_from_qdev(dev), 0, 0x22000000);
 144
 145     dev = qdev_create(NULL, "ARM,bitband-memory");
 146     qdev_prop_set_uint32(dev, "base", 0x40000000);
 147     qdev_init(dev);
 148     sysbus_mmio_map(sysbus_from_qdev(dev), 0, 0x42000000);
 149 }
 150
 151 /* Board init.  */
 152 /* Init CPU and memory for a v7-M based board.
 153    flash_size and sram_size are in kb.
 154    Returns the NVIC array.  */
 155
 156 qemu_irq *armv7m_init(int flash_size, int sram_size,
 157                       const char *kernel_filename, const char *cpu_model)
 158 {
 159     CPUState *env;
 160     DeviceState *nvic;
 161     /* FIXME: make this local state.  */
 162     static qemu_irq pic[64];
 163     qemu_irq *cpu_pic;
 164     uint32_t pc;
 165     int image_size;
 166     uint64_t entry;
 167     uint64_t lowaddr;
 168     int i;
 169
 170     flash_size *= 1024;
 171     sram_size *= 1024;
 172
 173     if (!cpu_model)
 174         cpu_model = "cortex-m3";
 175     env = cpu_init(cpu_model);
 176     if (!env) {
 177         fprintf(stderr, "Unable to find CPU definition\n");
 178         exit(1);
 179     }
 180
 181 #if 0
 182     /* > 32Mb SRAM gets complicated because it overlaps the bitband area.
 183        We don't have proper commandline options, so allocate half of memory
 184        as SRAM, up to a maximum of 32Mb, and the rest as code.  */
 185     if (ram_size > (512 + 32) * 1024 * 1024)
 186         ram_size = (512 + 32) * 1024 * 1024;
 187     sram_size = (ram_size / 2) & TARGET_PAGE_MASK;
 188     if (sram_size > 32 * 1024 * 1024)
 189         sram_size = 32 * 1024 * 1024;
 190     code_size = ram_size - sram_size;
 191 #endif
 192
 193     /* Flash programming is done via the SCU, so pretend it is ROM.  */
 194     cpu_register_physical_memory(0, flash_size,
 195                                  qemu_ram_alloc(flash_size) | IO_MEM_ROM);
 196     cpu_register_physical_memory(0x20000000, sram_size,
 197                                  qemu_ram_alloc(sram_size) | IO_MEM_RAM);
 198     armv7m_bitband_init();
 199
 200     nvic = qdev_create(NULL, "armv7m_nvic");
 201     env->v7m.nvic = nvic;
 202     qdev_init(nvic);
 203     cpu_pic = arm_pic_init_cpu(env);
 204     sysbus_connect_irq(sysbus_from_qdev(nvic), 0, cpu_pic[ARM_PIC_CPU_IRQ]);
 205     for (i = 0; i < 64; i++) {
 206         pic[i] = qdev_get_gpio_in(nvic, i);
 207     }
 208
 209     image_size = load_elf(kernel_filename, 0, &entry, &lowaddr, NULL);
 210     if (image_size < 0) {
 211         image_size = load_image_targphys(kernel_filename, 0, flash_size);
 212         lowaddr = 0;
 213     }
 214     if (image_size < 0) {
 215         fprintf(stderr, "qemu: could not load kernel '%s'\n",
 216                 kernel_filename);
 217         exit(1);
 218     }
 219
 220     /* If the image was loaded at address zero then assume it is a
 221        regular ROM image and perform the normal CPU reset sequence.
 222        Otherwise jump directly to the entry point.  */
 223     if (lowaddr == 0) {
 224         env->regs[13] = ldl_phys(0);
 225         pc = ldl_phys(4);
 226     } else {
 227         pc = entry;
 228     }
 229     env->thumb = pc & 1;
 230     env->regs[15] = pc & ~1;
 231
 232     /* Hack to map an additional page of ram at the top of the address
 233        space.  This stops qemu complaining about executing code outside RAM
 234        when returning from an exception.  */
 235     cpu_register_physical_memory(0xfffff000, 0x1000,
 236                                  qemu_ram_alloc(0x1000) | IO_MEM_RAM);
 237
 238     return pic;
 239 }
 240
 241 static SysBusDeviceInfo bitband_info = {
 242     .init = bitband_init,
 243     .qdev.name  = "ARM,bitband-memory",
 244     .qdev.size  = sizeof(BitBandState),
 245     .qdev.props = (Property[]) {
 246         DEFINE_PROP_UINT32("base", BitBandState, base, 0),
 247         DEFINE_PROP_END_OF_LIST(),
 248     }
 249 };
 250
 251 static void armv7m_register_devices(void)
 252 {
 253     sysbus_register_withprop(&bitband_info);
 254 }
 255
 256 device_init(armv7m_register_devices)