2 * QEMU System Emulator block driver
4 * Copyright (c) 2003 Fabrice Bellard
6 * Permission is hereby granted, free of charge, to any person obtaining a copy
7 * of this software and associated documentation files (the "Software"), to deal
8 * in the Software without restriction, including without limitation the rights
9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10 * copies of the Software, and to permit persons to whom the Software is
11 * furnished to do so, subject to the following conditions:
13 * The above copyright notice and this permission notice shall be included in
14 * all copies or substantial portions of the Software.
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
24 #include "config-host.h"
25 #include "qemu-common.h"
27 #include "monitor/monitor.h"
28 #include "block/block_int.h"
29 #include "block/blockjob.h"
30 #include "qemu/module.h"
31 #include "qapi/qmp/qjson.h"
32 #include "sysemu/sysemu.h"
33 #include "qemu/notify.h"
34 #include "block/coroutine.h"
35 #include "block/qapi.h"
36 #include "qmp-commands.h"
37 #include "qemu/timer.h"
40 #include <sys/types.h>
42 #include <sys/ioctl.h>
43 #include <sys/queue.h>
53 struct BdrvDirtyBitmap
{
55 QLIST_ENTRY(BdrvDirtyBitmap
) list
;
58 #define NOT_DONE 0x7fffffff /* used while emulated sync operation in progress */
60 static void bdrv_dev_change_media_cb(BlockDriverState
*bs
, bool load
);
61 static BlockDriverAIOCB
*bdrv_aio_readv_em(BlockDriverState
*bs
,
62 int64_t sector_num
, QEMUIOVector
*qiov
, int nb_sectors
,
63 BlockDriverCompletionFunc
*cb
, void *opaque
);
64 static BlockDriverAIOCB
*bdrv_aio_writev_em(BlockDriverState
*bs
,
65 int64_t sector_num
, QEMUIOVector
*qiov
, int nb_sectors
,
66 BlockDriverCompletionFunc
*cb
, void *opaque
);
67 static int coroutine_fn
bdrv_co_readv_em(BlockDriverState
*bs
,
68 int64_t sector_num
, int nb_sectors
,
70 static int coroutine_fn
bdrv_co_writev_em(BlockDriverState
*bs
,
71 int64_t sector_num
, int nb_sectors
,
73 static int coroutine_fn
bdrv_co_do_preadv(BlockDriverState
*bs
,
74 int64_t offset
, unsigned int bytes
, QEMUIOVector
*qiov
,
75 BdrvRequestFlags flags
);
76 static int coroutine_fn
bdrv_co_do_pwritev(BlockDriverState
*bs
,
77 int64_t offset
, unsigned int bytes
, QEMUIOVector
*qiov
,
78 BdrvRequestFlags flags
);
79 static BlockDriverAIOCB
*bdrv_co_aio_rw_vector(BlockDriverState
*bs
,
83 BdrvRequestFlags flags
,
84 BlockDriverCompletionFunc
*cb
,
87 static void coroutine_fn
bdrv_co_do_rw(void *opaque
);
88 static int coroutine_fn
bdrv_co_do_write_zeroes(BlockDriverState
*bs
,
89 int64_t sector_num
, int nb_sectors
, BdrvRequestFlags flags
);
91 static QTAILQ_HEAD(, BlockDriverState
) bdrv_states
=
92 QTAILQ_HEAD_INITIALIZER(bdrv_states
);
94 static QTAILQ_HEAD(, BlockDriverState
) graph_bdrv_states
=
95 QTAILQ_HEAD_INITIALIZER(graph_bdrv_states
);
97 static QLIST_HEAD(, BlockDriver
) bdrv_drivers
=
98 QLIST_HEAD_INITIALIZER(bdrv_drivers
);
100 /* If non-zero, use only whitelisted block drivers */
101 static int use_bdrv_whitelist
;
104 static int is_windows_drive_prefix(const char *filename
)
106 return (((filename
[0] >= 'a' && filename
[0] <= 'z') ||
107 (filename
[0] >= 'A' && filename
[0] <= 'Z')) &&
111 int is_windows_drive(const char *filename
)
113 if (is_windows_drive_prefix(filename
) &&
116 if (strstart(filename
, "\\\\.\\", NULL
) ||
117 strstart(filename
, "//./", NULL
))
123 /* throttling disk I/O limits */
124 void bdrv_set_io_limits(BlockDriverState
*bs
,
129 throttle_config(&bs
->throttle_state
, cfg
);
131 for (i
= 0; i
< 2; i
++) {
132 qemu_co_enter_next(&bs
->throttled_reqs
[i
]);
136 /* this function drain all the throttled IOs */
137 static bool bdrv_start_throttled_reqs(BlockDriverState
*bs
)
139 bool drained
= false;
140 bool enabled
= bs
->io_limits_enabled
;
143 bs
->io_limits_enabled
= false;
145 for (i
= 0; i
< 2; i
++) {
146 while (qemu_co_enter_next(&bs
->throttled_reqs
[i
])) {
151 bs
->io_limits_enabled
= enabled
;
156 void bdrv_io_limits_disable(BlockDriverState
*bs
)
158 bs
->io_limits_enabled
= false;
160 bdrv_start_throttled_reqs(bs
);
162 throttle_destroy(&bs
->throttle_state
);
165 static void bdrv_throttle_read_timer_cb(void *opaque
)
167 BlockDriverState
*bs
= opaque
;
168 qemu_co_enter_next(&bs
->throttled_reqs
[0]);
171 static void bdrv_throttle_write_timer_cb(void *opaque
)
173 BlockDriverState
*bs
= opaque
;
174 qemu_co_enter_next(&bs
->throttled_reqs
[1]);
177 /* should be called before bdrv_set_io_limits if a limit is set */
178 void bdrv_io_limits_enable(BlockDriverState
*bs
)
180 assert(!bs
->io_limits_enabled
);
181 throttle_init(&bs
->throttle_state
,
183 bdrv_throttle_read_timer_cb
,
184 bdrv_throttle_write_timer_cb
,
186 bs
->io_limits_enabled
= true;
189 /* This function makes an IO wait if needed
191 * @nb_sectors: the number of sectors of the IO
192 * @is_write: is the IO a write
194 static void bdrv_io_limits_intercept(BlockDriverState
*bs
,
198 /* does this io must wait */
199 bool must_wait
= throttle_schedule_timer(&bs
->throttle_state
, is_write
);
201 /* if must wait or any request of this type throttled queue the IO */
203 !qemu_co_queue_empty(&bs
->throttled_reqs
[is_write
])) {
204 qemu_co_queue_wait(&bs
->throttled_reqs
[is_write
]);
207 /* the IO will be executed, do the accounting */
208 throttle_account(&bs
->throttle_state
, is_write
, bytes
);
211 /* if the next request must wait -> do nothing */
212 if (throttle_schedule_timer(&bs
->throttle_state
, is_write
)) {
216 /* else queue next request for execution */
217 qemu_co_queue_next(&bs
->throttled_reqs
[is_write
]);
220 size_t bdrv_opt_mem_align(BlockDriverState
*bs
)
222 if (!bs
|| !bs
->drv
) {
223 /* 4k should be on the safe side */
227 return bs
->bl
.opt_mem_alignment
;
230 /* check if the path starts with "<protocol>:" */
231 static int path_has_protocol(const char *path
)
236 if (is_windows_drive(path
) ||
237 is_windows_drive_prefix(path
)) {
240 p
= path
+ strcspn(path
, ":/\\");
242 p
= path
+ strcspn(path
, ":/");
248 int path_is_absolute(const char *path
)
251 /* specific case for names like: "\\.\d:" */
252 if (is_windows_drive(path
) || is_windows_drive_prefix(path
)) {
255 return (*path
== '/' || *path
== '\\');
257 return (*path
== '/');
261 /* if filename is absolute, just copy it to dest. Otherwise, build a
262 path to it by considering it is relative to base_path. URL are
264 void path_combine(char *dest
, int dest_size
,
265 const char *base_path
,
266 const char *filename
)
273 if (path_is_absolute(filename
)) {
274 pstrcpy(dest
, dest_size
, filename
);
276 p
= strchr(base_path
, ':');
281 p1
= strrchr(base_path
, '/');
285 p2
= strrchr(base_path
, '\\');
297 if (len
> dest_size
- 1)
299 memcpy(dest
, base_path
, len
);
301 pstrcat(dest
, dest_size
, filename
);
305 void bdrv_get_full_backing_filename(BlockDriverState
*bs
, char *dest
, size_t sz
)
307 if (bs
->backing_file
[0] == '\0' || path_has_protocol(bs
->backing_file
)) {
308 pstrcpy(dest
, sz
, bs
->backing_file
);
310 path_combine(dest
, sz
, bs
->filename
, bs
->backing_file
);
314 void bdrv_register(BlockDriver
*bdrv
)
316 /* Block drivers without coroutine functions need emulation */
317 if (!bdrv
->bdrv_co_readv
) {
318 bdrv
->bdrv_co_readv
= bdrv_co_readv_em
;
319 bdrv
->bdrv_co_writev
= bdrv_co_writev_em
;
321 /* bdrv_co_readv_em()/brdv_co_writev_em() work in terms of aio, so if
322 * the block driver lacks aio we need to emulate that too.
324 if (!bdrv
->bdrv_aio_readv
) {
325 /* add AIO emulation layer */
326 bdrv
->bdrv_aio_readv
= bdrv_aio_readv_em
;
327 bdrv
->bdrv_aio_writev
= bdrv_aio_writev_em
;
331 QLIST_INSERT_HEAD(&bdrv_drivers
, bdrv
, list
);
334 /* create a new block device (by default it is empty) */
335 BlockDriverState
*bdrv_new(const char *device_name
, Error
**errp
)
337 BlockDriverState
*bs
;
339 if (bdrv_find(device_name
)) {
340 error_setg(errp
, "Device with id '%s' already exists",
344 if (bdrv_find_node(device_name
)) {
345 error_setg(errp
, "Device with node-name '%s' already exists",
350 bs
= g_malloc0(sizeof(BlockDriverState
));
351 QLIST_INIT(&bs
->dirty_bitmaps
);
352 pstrcpy(bs
->device_name
, sizeof(bs
->device_name
), device_name
);
353 if (device_name
[0] != '\0') {
354 QTAILQ_INSERT_TAIL(&bdrv_states
, bs
, device_list
);
356 bdrv_iostatus_disable(bs
);
357 notifier_list_init(&bs
->close_notifiers
);
358 notifier_with_return_list_init(&bs
->before_write_notifiers
);
359 qemu_co_queue_init(&bs
->throttled_reqs
[0]);
360 qemu_co_queue_init(&bs
->throttled_reqs
[1]);
366 void bdrv_add_close_notifier(BlockDriverState
*bs
, Notifier
*notify
)
368 notifier_list_add(&bs
->close_notifiers
, notify
);
371 BlockDriver
*bdrv_find_format(const char *format_name
)
374 QLIST_FOREACH(drv1
, &bdrv_drivers
, list
) {
375 if (!strcmp(drv1
->format_name
, format_name
)) {
382 static int bdrv_is_whitelisted(BlockDriver
*drv
, bool read_only
)
384 static const char *whitelist_rw
[] = {
385 CONFIG_BDRV_RW_WHITELIST
387 static const char *whitelist_ro
[] = {
388 CONFIG_BDRV_RO_WHITELIST
392 if (!whitelist_rw
[0] && !whitelist_ro
[0]) {
393 return 1; /* no whitelist, anything goes */
396 for (p
= whitelist_rw
; *p
; p
++) {
397 if (!strcmp(drv
->format_name
, *p
)) {
402 for (p
= whitelist_ro
; *p
; p
++) {
403 if (!strcmp(drv
->format_name
, *p
)) {
411 BlockDriver
*bdrv_find_whitelisted_format(const char *format_name
,
414 BlockDriver
*drv
= bdrv_find_format(format_name
);
415 return drv
&& bdrv_is_whitelisted(drv
, read_only
) ? drv
: NULL
;
418 typedef struct CreateCo
{
421 QEMUOptionParameter
*options
;
426 static void coroutine_fn
bdrv_create_co_entry(void *opaque
)
428 Error
*local_err
= NULL
;
431 CreateCo
*cco
= opaque
;
434 ret
= cco
->drv
->bdrv_create(cco
->filename
, cco
->options
, &local_err
);
436 error_propagate(&cco
->err
, local_err
);
441 int bdrv_create(BlockDriver
*drv
, const char* filename
,
442 QEMUOptionParameter
*options
, Error
**errp
)
449 .filename
= g_strdup(filename
),
455 if (!drv
->bdrv_create
) {
456 error_setg(errp
, "Driver '%s' does not support image creation", drv
->format_name
);
461 if (qemu_in_coroutine()) {
462 /* Fast-path if already in coroutine context */
463 bdrv_create_co_entry(&cco
);
465 co
= qemu_coroutine_create(bdrv_create_co_entry
);
466 qemu_coroutine_enter(co
, &cco
);
467 while (cco
.ret
== NOT_DONE
) {
475 error_propagate(errp
, cco
.err
);
477 error_setg_errno(errp
, -ret
, "Could not create image");
482 g_free(cco
.filename
);
486 int bdrv_create_file(const char* filename
, QEMUOptionParameter
*options
,
490 Error
*local_err
= NULL
;
493 drv
= bdrv_find_protocol(filename
, true);
495 error_setg(errp
, "Could not find protocol for file '%s'", filename
);
499 ret
= bdrv_create(drv
, filename
, options
, &local_err
);
501 error_propagate(errp
, local_err
);
506 int bdrv_refresh_limits(BlockDriverState
*bs
)
508 BlockDriver
*drv
= bs
->drv
;
510 memset(&bs
->bl
, 0, sizeof(bs
->bl
));
516 /* Take some limits from the children as a default */
518 bdrv_refresh_limits(bs
->file
);
519 bs
->bl
.opt_transfer_length
= bs
->file
->bl
.opt_transfer_length
;
520 bs
->bl
.opt_mem_alignment
= bs
->file
->bl
.opt_mem_alignment
;
522 bs
->bl
.opt_mem_alignment
= 512;
525 if (bs
->backing_hd
) {
526 bdrv_refresh_limits(bs
->backing_hd
);
527 bs
->bl
.opt_transfer_length
=
528 MAX(bs
->bl
.opt_transfer_length
,
529 bs
->backing_hd
->bl
.opt_transfer_length
);
530 bs
->bl
.opt_mem_alignment
=
531 MAX(bs
->bl
.opt_mem_alignment
,
532 bs
->backing_hd
->bl
.opt_mem_alignment
);
535 /* Then let the driver override it */
536 if (drv
->bdrv_refresh_limits
) {
537 return drv
->bdrv_refresh_limits(bs
);
544 * Create a uniquely-named empty temporary file.
545 * Return 0 upon success, otherwise a negative errno value.
547 int get_tmp_filename(char *filename
, int size
)
550 char temp_dir
[MAX_PATH
];
551 /* GetTempFileName requires that its output buffer (4th param)
552 have length MAX_PATH or greater. */
553 assert(size
>= MAX_PATH
);
554 return (GetTempPath(MAX_PATH
, temp_dir
)
555 && GetTempFileName(temp_dir
, "qem", 0, filename
)
556 ? 0 : -GetLastError());
560 tmpdir
= getenv("TMPDIR");
564 if (snprintf(filename
, size
, "%s/vl.XXXXXX", tmpdir
) >= size
) {
567 fd
= mkstemp(filename
);
571 if (close(fd
) != 0) {
580 * Detect host devices. By convention, /dev/cdrom[N] is always
581 * recognized as a host CDROM.
583 static BlockDriver
*find_hdev_driver(const char *filename
)
585 int score_max
= 0, score
;
586 BlockDriver
*drv
= NULL
, *d
;
588 QLIST_FOREACH(d
, &bdrv_drivers
, list
) {
589 if (d
->bdrv_probe_device
) {
590 score
= d
->bdrv_probe_device(filename
);
591 if (score
> score_max
) {
601 BlockDriver
*bdrv_find_protocol(const char *filename
,
602 bool allow_protocol_prefix
)
609 /* TODO Drivers without bdrv_file_open must be specified explicitly */
612 * XXX(hch): we really should not let host device detection
613 * override an explicit protocol specification, but moving this
614 * later breaks access to device names with colons in them.
615 * Thanks to the brain-dead persistent naming schemes on udev-
616 * based Linux systems those actually are quite common.
618 drv1
= find_hdev_driver(filename
);
623 if (!path_has_protocol(filename
) || !allow_protocol_prefix
) {
624 return bdrv_find_format("file");
627 p
= strchr(filename
, ':');
630 if (len
> sizeof(protocol
) - 1)
631 len
= sizeof(protocol
) - 1;
632 memcpy(protocol
, filename
, len
);
633 protocol
[len
] = '\0';
634 QLIST_FOREACH(drv1
, &bdrv_drivers
, list
) {
635 if (drv1
->protocol_name
&&
636 !strcmp(drv1
->protocol_name
, protocol
)) {
643 static int find_image_format(BlockDriverState
*bs
, const char *filename
,
644 BlockDriver
**pdrv
, Error
**errp
)
646 int score
, score_max
;
647 BlockDriver
*drv1
, *drv
;
651 /* Return the raw BlockDriver * to scsi-generic devices or empty drives */
652 if (bs
->sg
|| !bdrv_is_inserted(bs
) || bdrv_getlength(bs
) == 0) {
653 drv
= bdrv_find_format("raw");
655 error_setg(errp
, "Could not find raw image format");
662 ret
= bdrv_pread(bs
, 0, buf
, sizeof(buf
));
664 error_setg_errno(errp
, -ret
, "Could not read image for determining its "
672 QLIST_FOREACH(drv1
, &bdrv_drivers
, list
) {
673 if (drv1
->bdrv_probe
) {
674 score
= drv1
->bdrv_probe(buf
, ret
, filename
);
675 if (score
> score_max
) {
682 error_setg(errp
, "Could not determine image format: No compatible "
691 * Set the current 'total_sectors' value
693 static int refresh_total_sectors(BlockDriverState
*bs
, int64_t hint
)
695 BlockDriver
*drv
= bs
->drv
;
697 /* Do not attempt drv->bdrv_getlength() on scsi-generic devices */
701 /* query actual device if possible, otherwise just trust the hint */
702 if (drv
->bdrv_getlength
) {
703 int64_t length
= drv
->bdrv_getlength(bs
);
707 hint
= DIV_ROUND_UP(length
, BDRV_SECTOR_SIZE
);
710 bs
->total_sectors
= hint
;
715 * Set open flags for a given discard mode
717 * Return 0 on success, -1 if the discard mode was invalid.
719 int bdrv_parse_discard_flags(const char *mode
, int *flags
)
721 *flags
&= ~BDRV_O_UNMAP
;
723 if (!strcmp(mode
, "off") || !strcmp(mode
, "ignore")) {
725 } else if (!strcmp(mode
, "on") || !strcmp(mode
, "unmap")) {
726 *flags
|= BDRV_O_UNMAP
;
735 * Set open flags for a given cache mode
737 * Return 0 on success, -1 if the cache mode was invalid.
739 int bdrv_parse_cache_flags(const char *mode
, int *flags
)
741 *flags
&= ~BDRV_O_CACHE_MASK
;
743 if (!strcmp(mode
, "off") || !strcmp(mode
, "none")) {
744 *flags
|= BDRV_O_NOCACHE
| BDRV_O_CACHE_WB
;
745 } else if (!strcmp(mode
, "directsync")) {
746 *flags
|= BDRV_O_NOCACHE
;
747 } else if (!strcmp(mode
, "writeback")) {
748 *flags
|= BDRV_O_CACHE_WB
;
749 } else if (!strcmp(mode
, "unsafe")) {
750 *flags
|= BDRV_O_CACHE_WB
;
751 *flags
|= BDRV_O_NO_FLUSH
;
752 } else if (!strcmp(mode
, "writethrough")) {
753 /* this is the default */
762 * The copy-on-read flag is actually a reference count so multiple users may
763 * use the feature without worrying about clobbering its previous state.
764 * Copy-on-read stays enabled until all users have called to disable it.
766 void bdrv_enable_copy_on_read(BlockDriverState
*bs
)
771 void bdrv_disable_copy_on_read(BlockDriverState
*bs
)
773 assert(bs
->copy_on_read
> 0);
778 * Returns the flags that bs->file should get, based on the given flags for
781 static int bdrv_inherited_flags(int flags
)
783 /* Enable protocol handling, disable format probing for bs->file */
784 flags
|= BDRV_O_PROTOCOL
;
786 /* Our block drivers take care to send flushes and respect unmap policy,
787 * so we can enable both unconditionally on lower layers. */
788 flags
|= BDRV_O_CACHE_WB
| BDRV_O_UNMAP
;
790 /* The backing file of a temporary snapshot is read-only */
791 if (flags
& BDRV_O_SNAPSHOT
) {
792 flags
&= ~BDRV_O_RDWR
;
795 /* Clear flags that only apply to the top layer */
796 flags
&= ~(BDRV_O_SNAPSHOT
| BDRV_O_NO_BACKING
| BDRV_O_COPY_ON_READ
);
802 * Returns the flags that bs->backing_hd should get, based on the given flags
805 static int bdrv_backing_flags(int flags
)
807 /* backing files always opened read-only */
808 flags
&= ~(BDRV_O_RDWR
| BDRV_O_COPY_ON_READ
);
810 /* snapshot=on is handled on the top layer */
811 flags
&= ~(BDRV_O_SNAPSHOT
| BDRV_O_TEMPORARY
);
816 static int bdrv_open_flags(BlockDriverState
*bs
, int flags
)
818 int open_flags
= flags
| BDRV_O_CACHE_WB
;
820 /* The backing file of a temporary snapshot is read-only */
821 if (flags
& BDRV_O_SNAPSHOT
) {
822 open_flags
&= ~BDRV_O_RDWR
;
826 * Clear flags that are internal to the block layer before opening the
829 open_flags
&= ~(BDRV_O_SNAPSHOT
| BDRV_O_NO_BACKING
);
832 * Snapshots should be writable.
834 if (flags
& BDRV_O_TEMPORARY
) {
835 open_flags
|= BDRV_O_RDWR
;
841 static void bdrv_assign_node_name(BlockDriverState
*bs
,
842 const char *node_name
,
849 /* empty string node name is invalid */
850 if (node_name
[0] == '\0') {
851 error_setg(errp
, "Empty node name");
855 /* takes care of avoiding namespaces collisions */
856 if (bdrv_find(node_name
)) {
857 error_setg(errp
, "node-name=%s is conflicting with a device id",
862 /* takes care of avoiding duplicates node names */
863 if (bdrv_find_node(node_name
)) {
864 error_setg(errp
, "Duplicate node name");
868 /* copy node name into the bs and insert it into the graph list */
869 pstrcpy(bs
->node_name
, sizeof(bs
->node_name
), node_name
);
870 QTAILQ_INSERT_TAIL(&graph_bdrv_states
, bs
, node_list
);
874 * Common part for opening disk images and files
876 * Removes all processed options from *options.
878 static int bdrv_open_common(BlockDriverState
*bs
, BlockDriverState
*file
,
879 QDict
*options
, int flags
, BlockDriver
*drv
, Error
**errp
)
882 const char *filename
;
883 const char *node_name
= NULL
;
884 Error
*local_err
= NULL
;
887 assert(bs
->file
== NULL
);
888 assert(options
!= NULL
&& bs
->options
!= options
);
891 filename
= file
->filename
;
893 filename
= qdict_get_try_str(options
, "filename");
896 if (drv
->bdrv_needs_filename
&& !filename
) {
897 error_setg(errp
, "The '%s' block driver requires a file name",
902 trace_bdrv_open_common(bs
, filename
?: "", flags
, drv
->format_name
);
904 node_name
= qdict_get_try_str(options
, "node-name");
905 bdrv_assign_node_name(bs
, node_name
, &local_err
);
907 error_propagate(errp
, local_err
);
910 qdict_del(options
, "node-name");
912 /* bdrv_open() with directly using a protocol as drv. This layer is already
913 * opened, so assign it to bs (while file becomes a closed BlockDriverState)
914 * and return immediately. */
915 if (file
!= NULL
&& drv
->bdrv_file_open
) {
920 bs
->open_flags
= flags
;
921 bs
->guest_block_size
= 512;
922 bs
->request_alignment
= 512;
923 bs
->zero_beyond_eof
= true;
924 open_flags
= bdrv_open_flags(bs
, flags
);
925 bs
->read_only
= !(open_flags
& BDRV_O_RDWR
);
927 if (use_bdrv_whitelist
&& !bdrv_is_whitelisted(drv
, bs
->read_only
)) {
929 !bs
->read_only
&& bdrv_is_whitelisted(drv
, true)
930 ? "Driver '%s' can only be used for read-only devices"
931 : "Driver '%s' is not whitelisted",
936 assert(bs
->copy_on_read
== 0); /* bdrv_new() and bdrv_close() make it so */
937 if (flags
& BDRV_O_COPY_ON_READ
) {
938 if (!bs
->read_only
) {
939 bdrv_enable_copy_on_read(bs
);
941 error_setg(errp
, "Can't use copy-on-read on read-only device");
946 if (filename
!= NULL
) {
947 pstrcpy(bs
->filename
, sizeof(bs
->filename
), filename
);
949 bs
->filename
[0] = '\0';
953 bs
->opaque
= g_malloc0(drv
->instance_size
);
955 bs
->enable_write_cache
= !!(flags
& BDRV_O_CACHE_WB
);
957 /* Open the image, either directly or using a protocol */
958 if (drv
->bdrv_file_open
) {
959 assert(file
== NULL
);
960 assert(!drv
->bdrv_needs_filename
|| filename
!= NULL
);
961 ret
= drv
->bdrv_file_open(bs
, options
, open_flags
, &local_err
);
964 error_setg(errp
, "Can't use '%s' as a block driver for the "
965 "protocol level", drv
->format_name
);
970 ret
= drv
->bdrv_open(bs
, options
, open_flags
, &local_err
);
975 error_propagate(errp
, local_err
);
976 } else if (bs
->filename
[0]) {
977 error_setg_errno(errp
, -ret
, "Could not open '%s'", bs
->filename
);
979 error_setg_errno(errp
, -ret
, "Could not open image");
984 ret
= refresh_total_sectors(bs
, bs
->total_sectors
);
986 error_setg_errno(errp
, -ret
, "Could not refresh total sector count");
990 bdrv_refresh_limits(bs
);
991 assert(bdrv_opt_mem_align(bs
) != 0);
992 assert((bs
->request_alignment
!= 0) || bs
->sg
);
1004 * Opens a file using a protocol (file, host_device, nbd, ...)
1006 * options is an indirect pointer to a QDict of options to pass to the block
1007 * drivers, or pointer to NULL for an empty set of options. If this function
1008 * takes ownership of the QDict reference, it will set *options to NULL;
1009 * otherwise, it will contain unused/unrecognized options after this function
1010 * returns. Then, the caller is responsible for freeing it. If it intends to
1011 * reuse the QDict, QINCREF() should be called beforehand.
1013 static int bdrv_file_open(BlockDriverState
*bs
, const char *filename
,
1014 QDict
**options
, int flags
, Error
**errp
)
1017 const char *drvname
;
1018 bool parse_filename
= false;
1019 Error
*local_err
= NULL
;
1022 /* Fetch the file name from the options QDict if necessary */
1024 filename
= qdict_get_try_str(*options
, "filename");
1025 } else if (filename
&& !qdict_haskey(*options
, "filename")) {
1026 qdict_put(*options
, "filename", qstring_from_str(filename
));
1027 parse_filename
= true;
1029 error_setg(errp
, "Can't specify 'file' and 'filename' options at the "
1035 /* Find the right block driver */
1036 drvname
= qdict_get_try_str(*options
, "driver");
1038 drv
= bdrv_find_format(drvname
);
1040 error_setg(errp
, "Unknown driver '%s'", drvname
);
1042 qdict_del(*options
, "driver");
1043 } else if (filename
) {
1044 drv
= bdrv_find_protocol(filename
, parse_filename
);
1046 error_setg(errp
, "Unknown protocol");
1049 error_setg(errp
, "Must specify either driver or file");
1054 /* errp has been set already */
1059 /* Parse the filename and open it */
1060 if (drv
->bdrv_parse_filename
&& parse_filename
) {
1061 drv
->bdrv_parse_filename(filename
, *options
, &local_err
);
1063 error_propagate(errp
, local_err
);
1068 if (!drv
->bdrv_needs_filename
) {
1069 qdict_del(*options
, "filename");
1071 filename
= qdict_get_str(*options
, "filename");
1075 if (!drv
->bdrv_file_open
) {
1076 ret
= bdrv_open(&bs
, filename
, NULL
, *options
, flags
, drv
, &local_err
);
1079 ret
= bdrv_open_common(bs
, NULL
, *options
, flags
, drv
, &local_err
);
1082 error_propagate(errp
, local_err
);
1094 * Opens the backing file for a BlockDriverState if not yet open
1096 * options is a QDict of options to pass to the block drivers, or NULL for an
1097 * empty set of options. The reference to the QDict is transferred to this
1098 * function (even on failure), so if the caller intends to reuse the dictionary,
1099 * it needs to use QINCREF() before calling bdrv_file_open.
1101 int bdrv_open_backing_file(BlockDriverState
*bs
, QDict
*options
, Error
**errp
)
1103 char *backing_filename
= g_malloc0(PATH_MAX
);
1105 BlockDriver
*back_drv
= NULL
;
1106 Error
*local_err
= NULL
;
1108 if (bs
->backing_hd
!= NULL
) {
1113 /* NULL means an empty set of options */
1114 if (options
== NULL
) {
1115 options
= qdict_new();
1118 bs
->open_flags
&= ~BDRV_O_NO_BACKING
;
1119 if (qdict_haskey(options
, "file.filename")) {
1120 backing_filename
[0] = '\0';
1121 } else if (bs
->backing_file
[0] == '\0' && qdict_size(options
) == 0) {
1125 bdrv_get_full_backing_filename(bs
, backing_filename
, PATH_MAX
);
1128 if (bs
->backing_format
[0] != '\0') {
1129 back_drv
= bdrv_find_format(bs
->backing_format
);
1132 assert(bs
->backing_hd
== NULL
);
1133 ret
= bdrv_open(&bs
->backing_hd
,
1134 *backing_filename
? backing_filename
: NULL
, NULL
, options
,
1135 bdrv_backing_flags(bs
->open_flags
), back_drv
, &local_err
);
1137 bs
->backing_hd
= NULL
;
1138 bs
->open_flags
|= BDRV_O_NO_BACKING
;
1139 error_setg(errp
, "Could not open backing file: %s",
1140 error_get_pretty(local_err
));
1141 error_free(local_err
);
1145 if (bs
->backing_hd
->file
) {
1146 pstrcpy(bs
->backing_file
, sizeof(bs
->backing_file
),
1147 bs
->backing_hd
->file
->filename
);
1150 /* Recalculate the BlockLimits with the backing file */
1151 bdrv_refresh_limits(bs
);
1154 g_free(backing_filename
);
1159 * Opens a disk image whose options are given as BlockdevRef in another block
1162 * If allow_none is true, no image will be opened if filename is false and no
1163 * BlockdevRef is given. *pbs will remain unchanged and 0 will be returned.
1165 * bdrev_key specifies the key for the image's BlockdevRef in the options QDict.
1166 * That QDict has to be flattened; therefore, if the BlockdevRef is a QDict
1167 * itself, all options starting with "${bdref_key}." are considered part of the
1170 * The BlockdevRef will be removed from the options QDict.
1172 * To conform with the behavior of bdrv_open(), *pbs has to be NULL.
1174 int bdrv_open_image(BlockDriverState
**pbs
, const char *filename
,
1175 QDict
*options
, const char *bdref_key
, int flags
,
1176 bool allow_none
, Error
**errp
)
1178 QDict
*image_options
;
1180 char *bdref_key_dot
;
1181 const char *reference
;
1184 assert(*pbs
== NULL
);
1186 bdref_key_dot
= g_strdup_printf("%s.", bdref_key
);
1187 qdict_extract_subqdict(options
, &image_options
, bdref_key_dot
);
1188 g_free(bdref_key_dot
);
1190 reference
= qdict_get_try_str(options
, bdref_key
);
1191 if (!filename
&& !reference
&& !qdict_size(image_options
)) {
1195 error_setg(errp
, "A block device must be specified for \"%s\"",
1202 ret
= bdrv_open(pbs
, filename
, reference
, image_options
, flags
, NULL
, errp
);
1205 qdict_del(options
, bdref_key
);
1209 void bdrv_append_temp_snapshot(BlockDriverState
*bs
, Error
**errp
)
1211 /* TODO: extra byte is a hack to ensure MAX_PATH space on Windows. */
1212 char *tmp_filename
= g_malloc0(PATH_MAX
+ 1);
1214 BlockDriver
*bdrv_qcow2
;
1215 QEMUOptionParameter
*create_options
;
1216 QDict
*snapshot_options
;
1217 BlockDriverState
*bs_snapshot
;
1221 /* if snapshot, we create a temporary backing file and open it
1222 instead of opening 'filename' directly */
1224 /* Get the required size from the image */
1225 total_size
= bdrv_getlength(bs
);
1226 if (total_size
< 0) {
1227 error_setg_errno(errp
, -total_size
, "Could not get image size");
1230 total_size
&= BDRV_SECTOR_MASK
;
1232 /* Create the temporary image */
1233 ret
= get_tmp_filename(tmp_filename
, PATH_MAX
+ 1);
1235 error_setg_errno(errp
, -ret
, "Could not get temporary filename");
1239 bdrv_qcow2
= bdrv_find_format("qcow2");
1240 create_options
= parse_option_parameters("", bdrv_qcow2
->create_options
,
1243 set_option_parameter_int(create_options
, BLOCK_OPT_SIZE
, total_size
);
1245 ret
= bdrv_create(bdrv_qcow2
, tmp_filename
, create_options
, &local_err
);
1246 free_option_parameters(create_options
);
1248 error_setg_errno(errp
, -ret
, "Could not create temporary overlay "
1249 "'%s': %s", tmp_filename
,
1250 error_get_pretty(local_err
));
1251 error_free(local_err
);
1255 /* Prepare a new options QDict for the temporary file */
1256 snapshot_options
= qdict_new();
1257 qdict_put(snapshot_options
, "file.driver",
1258 qstring_from_str("file"));
1259 qdict_put(snapshot_options
, "file.filename",
1260 qstring_from_str(tmp_filename
));
1262 bs_snapshot
= bdrv_new("", &error_abort
);
1264 ret
= bdrv_open(&bs_snapshot
, NULL
, NULL
, snapshot_options
,
1265 (bs
->open_flags
& ~BDRV_O_SNAPSHOT
) | BDRV_O_TEMPORARY
,
1266 bdrv_qcow2
, &local_err
);
1268 error_propagate(errp
, local_err
);
1272 bdrv_append(bs_snapshot
, bs
);
1275 g_free(tmp_filename
);
1279 * Opens a disk image (raw, qcow2, vmdk, ...)
1281 * options is a QDict of options to pass to the block drivers, or NULL for an
1282 * empty set of options. The reference to the QDict belongs to the block layer
1283 * after the call (even on failure), so if the caller intends to reuse the
1284 * dictionary, it needs to use QINCREF() before calling bdrv_open.
1286 * If *pbs is NULL, a new BDS will be created with a pointer to it stored there.
1287 * If it is not NULL, the referenced BDS will be reused.
1289 * The reference parameter may be used to specify an existing block device which
1290 * should be opened. If specified, neither options nor a filename may be given,
1291 * nor can an existing BDS be reused (that is, *pbs has to be NULL).
1293 int bdrv_open(BlockDriverState
**pbs
, const char *filename
,
1294 const char *reference
, QDict
*options
, int flags
,
1295 BlockDriver
*drv
, Error
**errp
)
1298 BlockDriverState
*file
= NULL
, *bs
;
1299 const char *drvname
;
1300 Error
*local_err
= NULL
;
1305 bool options_non_empty
= options
? qdict_size(options
) : false;
1309 error_setg(errp
, "Cannot reuse an existing BDS when referencing "
1310 "another block device");
1314 if (filename
|| options_non_empty
) {
1315 error_setg(errp
, "Cannot reference an existing block device with "
1316 "additional options or a new filename");
1320 bs
= bdrv_lookup_bs(reference
, reference
, errp
);
1332 bs
= bdrv_new("", &error_abort
);
1335 /* NULL means an empty set of options */
1336 if (options
== NULL
) {
1337 options
= qdict_new();
1340 bs
->options
= options
;
1341 options
= qdict_clone_shallow(options
);
1343 if (flags
& BDRV_O_PROTOCOL
) {
1345 ret
= bdrv_file_open(bs
, filename
, &options
, flags
& ~BDRV_O_PROTOCOL
,
1350 } else if (bs
->drv
) {
1351 goto close_and_fail
;
1357 /* Open image file without format layer */
1358 if (flags
& BDRV_O_RDWR
) {
1359 flags
|= BDRV_O_ALLOW_RDWR
;
1362 assert(file
== NULL
);
1363 ret
= bdrv_open_image(&file
, filename
, options
, "file",
1364 bdrv_inherited_flags(flags
),
1370 /* Find the right image format driver */
1371 drvname
= qdict_get_try_str(options
, "driver");
1373 drv
= bdrv_find_format(drvname
);
1374 qdict_del(options
, "driver");
1376 error_setg(errp
, "Invalid driver: '%s'", drvname
);
1384 ret
= find_image_format(file
, filename
, &drv
, &local_err
);
1386 error_setg(errp
, "Must specify either driver or file");
1396 /* Open the image */
1397 ret
= bdrv_open_common(bs
, file
, options
, flags
, drv
, &local_err
);
1402 if (file
&& (bs
->file
!= file
)) {
1407 /* If there is a backing file, use it */
1408 if ((flags
& BDRV_O_NO_BACKING
) == 0) {
1409 QDict
*backing_options
;
1411 qdict_extract_subqdict(options
, &backing_options
, "backing.");
1412 ret
= bdrv_open_backing_file(bs
, backing_options
, &local_err
);
1414 goto close_and_fail
;
1418 /* For snapshot=on, create a temporary qcow2 overlay. bs points to the
1419 * temporary snapshot afterwards. */
1420 if (flags
& BDRV_O_SNAPSHOT
) {
1421 bdrv_append_temp_snapshot(bs
, &local_err
);
1423 error_propagate(errp
, local_err
);
1424 goto close_and_fail
;
1430 /* Check if any unknown options were used */
1431 if (options
&& (qdict_size(options
) != 0)) {
1432 const QDictEntry
*entry
= qdict_first(options
);
1433 if (flags
& BDRV_O_PROTOCOL
) {
1434 error_setg(errp
, "Block protocol '%s' doesn't support the option "
1435 "'%s'", drv
->format_name
, entry
->key
);
1437 error_setg(errp
, "Block format '%s' used by device '%s' doesn't "
1438 "support the option '%s'", drv
->format_name
,
1439 bs
->device_name
, entry
->key
);
1443 goto close_and_fail
;
1446 if (!bdrv_key_required(bs
)) {
1447 bdrv_dev_change_media_cb(bs
, true);
1448 } else if (!runstate_check(RUN_STATE_PRELAUNCH
)
1449 && !runstate_check(RUN_STATE_INMIGRATE
)
1450 && !runstate_check(RUN_STATE_PAUSED
)) { /* HACK */
1452 "Guest must be stopped for opening of encrypted image");
1454 goto close_and_fail
;
1465 QDECREF(bs
->options
);
1469 /* If *pbs is NULL, a new BDS has been created in this function and
1470 needs to be freed now. Otherwise, it does not need to be closed,
1471 since it has not really been opened yet. */
1475 error_propagate(errp
, local_err
);
1480 /* See fail path, but now the BDS has to be always closed */
1488 error_propagate(errp
, local_err
);
1493 typedef struct BlockReopenQueueEntry
{
1495 BDRVReopenState state
;
1496 QSIMPLEQ_ENTRY(BlockReopenQueueEntry
) entry
;
1497 } BlockReopenQueueEntry
;
1500 * Adds a BlockDriverState to a simple queue for an atomic, transactional
1501 * reopen of multiple devices.
1503 * bs_queue can either be an existing BlockReopenQueue that has had QSIMPLE_INIT
1504 * already performed, or alternatively may be NULL a new BlockReopenQueue will
1505 * be created and initialized. This newly created BlockReopenQueue should be
1506 * passed back in for subsequent calls that are intended to be of the same
1509 * bs is the BlockDriverState to add to the reopen queue.
1511 * flags contains the open flags for the associated bs
1513 * returns a pointer to bs_queue, which is either the newly allocated
1514 * bs_queue, or the existing bs_queue being used.
1517 BlockReopenQueue
*bdrv_reopen_queue(BlockReopenQueue
*bs_queue
,
1518 BlockDriverState
*bs
, int flags
)
1522 BlockReopenQueueEntry
*bs_entry
;
1523 if (bs_queue
== NULL
) {
1524 bs_queue
= g_new0(BlockReopenQueue
, 1);
1525 QSIMPLEQ_INIT(bs_queue
);
1528 /* bdrv_open() masks this flag out */
1529 flags
&= ~BDRV_O_PROTOCOL
;
1532 bdrv_reopen_queue(bs_queue
, bs
->file
, bdrv_inherited_flags(flags
));
1535 bs_entry
= g_new0(BlockReopenQueueEntry
, 1);
1536 QSIMPLEQ_INSERT_TAIL(bs_queue
, bs_entry
, entry
);
1538 bs_entry
->state
.bs
= bs
;
1539 bs_entry
->state
.flags
= flags
;
1545 * Reopen multiple BlockDriverStates atomically & transactionally.
1547 * The queue passed in (bs_queue) must have been built up previous
1548 * via bdrv_reopen_queue().
1550 * Reopens all BDS specified in the queue, with the appropriate
1551 * flags. All devices are prepared for reopen, and failure of any
1552 * device will cause all device changes to be abandonded, and intermediate
1555 * If all devices prepare successfully, then the changes are committed
1559 int bdrv_reopen_multiple(BlockReopenQueue
*bs_queue
, Error
**errp
)
1562 BlockReopenQueueEntry
*bs_entry
, *next
;
1563 Error
*local_err
= NULL
;
1565 assert(bs_queue
!= NULL
);
1569 QSIMPLEQ_FOREACH(bs_entry
, bs_queue
, entry
) {
1570 if (bdrv_reopen_prepare(&bs_entry
->state
, bs_queue
, &local_err
)) {
1571 error_propagate(errp
, local_err
);
1574 bs_entry
->prepared
= true;
1577 /* If we reach this point, we have success and just need to apply the
1580 QSIMPLEQ_FOREACH(bs_entry
, bs_queue
, entry
) {
1581 bdrv_reopen_commit(&bs_entry
->state
);
1587 QSIMPLEQ_FOREACH_SAFE(bs_entry
, bs_queue
, entry
, next
) {
1588 if (ret
&& bs_entry
->prepared
) {
1589 bdrv_reopen_abort(&bs_entry
->state
);
1598 /* Reopen a single BlockDriverState with the specified flags. */
1599 int bdrv_reopen(BlockDriverState
*bs
, int bdrv_flags
, Error
**errp
)
1602 Error
*local_err
= NULL
;
1603 BlockReopenQueue
*queue
= bdrv_reopen_queue(NULL
, bs
, bdrv_flags
);
1605 ret
= bdrv_reopen_multiple(queue
, &local_err
);
1606 if (local_err
!= NULL
) {
1607 error_propagate(errp
, local_err
);
1614 * Prepares a BlockDriverState for reopen. All changes are staged in the
1615 * 'opaque' field of the BDRVReopenState, which is used and allocated by
1616 * the block driver layer .bdrv_reopen_prepare()
1618 * bs is the BlockDriverState to reopen
1619 * flags are the new open flags
1620 * queue is the reopen queue
1622 * Returns 0 on success, non-zero on error. On error errp will be set
1625 * On failure, bdrv_reopen_abort() will be called to clean up any data.
1626 * It is the responsibility of the caller to then call the abort() or
1627 * commit() for any other BDS that have been left in a prepare() state
1630 int bdrv_reopen_prepare(BDRVReopenState
*reopen_state
, BlockReopenQueue
*queue
,
1634 Error
*local_err
= NULL
;
1637 assert(reopen_state
!= NULL
);
1638 assert(reopen_state
->bs
->drv
!= NULL
);
1639 drv
= reopen_state
->bs
->drv
;
1641 /* if we are to stay read-only, do not allow permission change
1643 if (!(reopen_state
->bs
->open_flags
& BDRV_O_ALLOW_RDWR
) &&
1644 reopen_state
->flags
& BDRV_O_RDWR
) {
1645 error_set(errp
, QERR_DEVICE_IS_READ_ONLY
,
1646 reopen_state
->bs
->device_name
);
1651 ret
= bdrv_flush(reopen_state
->bs
);
1653 error_set(errp
, ERROR_CLASS_GENERIC_ERROR
, "Error (%s) flushing drive",
1658 if (drv
->bdrv_reopen_prepare
) {
1659 ret
= drv
->bdrv_reopen_prepare(reopen_state
, queue
, &local_err
);
1661 if (local_err
!= NULL
) {
1662 error_propagate(errp
, local_err
);
1664 error_setg(errp
, "failed while preparing to reopen image '%s'",
1665 reopen_state
->bs
->filename
);
1670 /* It is currently mandatory to have a bdrv_reopen_prepare()
1671 * handler for each supported drv. */
1672 error_set(errp
, QERR_BLOCK_FORMAT_FEATURE_NOT_SUPPORTED
,
1673 drv
->format_name
, reopen_state
->bs
->device_name
,
1674 "reopening of file");
1686 * Takes the staged changes for the reopen from bdrv_reopen_prepare(), and
1687 * makes them final by swapping the staging BlockDriverState contents into
1688 * the active BlockDriverState contents.
1690 void bdrv_reopen_commit(BDRVReopenState
*reopen_state
)
1694 assert(reopen_state
!= NULL
);
1695 drv
= reopen_state
->bs
->drv
;
1696 assert(drv
!= NULL
);
1698 /* If there are any driver level actions to take */
1699 if (drv
->bdrv_reopen_commit
) {
1700 drv
->bdrv_reopen_commit(reopen_state
);
1703 /* set BDS specific flags now */
1704 reopen_state
->bs
->open_flags
= reopen_state
->flags
;
1705 reopen_state
->bs
->enable_write_cache
= !!(reopen_state
->flags
&
1707 reopen_state
->bs
->read_only
= !(reopen_state
->flags
& BDRV_O_RDWR
);
1709 bdrv_refresh_limits(reopen_state
->bs
);
1713 * Abort the reopen, and delete and free the staged changes in
1716 void bdrv_reopen_abort(BDRVReopenState
*reopen_state
)
1720 assert(reopen_state
!= NULL
);
1721 drv
= reopen_state
->bs
->drv
;
1722 assert(drv
!= NULL
);
1724 if (drv
->bdrv_reopen_abort
) {
1725 drv
->bdrv_reopen_abort(reopen_state
);
1730 void bdrv_close(BlockDriverState
*bs
)
1733 block_job_cancel_sync(bs
->job
);
1735 bdrv_drain_all(); /* complete I/O */
1737 bdrv_drain_all(); /* in case flush left pending I/O */
1738 notifier_list_notify(&bs
->close_notifiers
, bs
);
1741 if (bs
->backing_hd
) {
1742 bdrv_unref(bs
->backing_hd
);
1743 bs
->backing_hd
= NULL
;
1745 bs
->drv
->bdrv_close(bs
);
1749 bs
->copy_on_read
= 0;
1750 bs
->backing_file
[0] = '\0';
1751 bs
->backing_format
[0] = '\0';
1752 bs
->total_sectors
= 0;
1757 bs
->zero_beyond_eof
= false;
1758 QDECREF(bs
->options
);
1761 if (bs
->file
!= NULL
) {
1762 bdrv_unref(bs
->file
);
1767 bdrv_dev_change_media_cb(bs
, false);
1769 /*throttling disk I/O limits*/
1770 if (bs
->io_limits_enabled
) {
1771 bdrv_io_limits_disable(bs
);
1775 void bdrv_close_all(void)
1777 BlockDriverState
*bs
;
1779 QTAILQ_FOREACH(bs
, &bdrv_states
, device_list
) {
1784 /* Check if any requests are in-flight (including throttled requests) */
1785 static bool bdrv_requests_pending(BlockDriverState
*bs
)
1787 if (!QLIST_EMPTY(&bs
->tracked_requests
)) {
1790 if (!qemu_co_queue_empty(&bs
->throttled_reqs
[0])) {
1793 if (!qemu_co_queue_empty(&bs
->throttled_reqs
[1])) {
1796 if (bs
->file
&& bdrv_requests_pending(bs
->file
)) {
1799 if (bs
->backing_hd
&& bdrv_requests_pending(bs
->backing_hd
)) {
1805 static bool bdrv_requests_pending_all(void)
1807 BlockDriverState
*bs
;
1808 QTAILQ_FOREACH(bs
, &bdrv_states
, device_list
) {
1809 if (bdrv_requests_pending(bs
)) {
1817 * Wait for pending requests to complete across all BlockDriverStates
1819 * This function does not flush data to disk, use bdrv_flush_all() for that
1820 * after calling this function.
1822 * Note that completion of an asynchronous I/O operation can trigger any
1823 * number of other I/O operations on other devices---for example a coroutine
1824 * can be arbitrarily complex and a constant flow of I/O can come until the
1825 * coroutine is complete. Because of this, it is not possible to have a
1826 * function to drain a single device's I/O queue.
1828 void bdrv_drain_all(void)
1830 /* Always run first iteration so any pending completion BHs run */
1832 BlockDriverState
*bs
;
1835 QTAILQ_FOREACH(bs
, &bdrv_states
, device_list
) {
1836 bdrv_start_throttled_reqs(bs
);
1839 busy
= bdrv_requests_pending_all();
1840 busy
|= aio_poll(qemu_get_aio_context(), busy
);
1844 /* make a BlockDriverState anonymous by removing from bdrv_state and
1845 * graph_bdrv_state list.
1846 Also, NULL terminate the device_name to prevent double remove */
1847 void bdrv_make_anon(BlockDriverState
*bs
)
1849 if (bs
->device_name
[0] != '\0') {
1850 QTAILQ_REMOVE(&bdrv_states
, bs
, device_list
);
1852 bs
->device_name
[0] = '\0';
1853 if (bs
->node_name
[0] != '\0') {
1854 QTAILQ_REMOVE(&graph_bdrv_states
, bs
, node_list
);
1856 bs
->node_name
[0] = '\0';
1859 static void bdrv_rebind(BlockDriverState
*bs
)
1861 if (bs
->drv
&& bs
->drv
->bdrv_rebind
) {
1862 bs
->drv
->bdrv_rebind(bs
);
1866 static void bdrv_move_feature_fields(BlockDriverState
*bs_dest
,
1867 BlockDriverState
*bs_src
)
1869 /* move some fields that need to stay attached to the device */
1872 bs_dest
->dev_ops
= bs_src
->dev_ops
;
1873 bs_dest
->dev_opaque
= bs_src
->dev_opaque
;
1874 bs_dest
->dev
= bs_src
->dev
;
1875 bs_dest
->guest_block_size
= bs_src
->guest_block_size
;
1876 bs_dest
->copy_on_read
= bs_src
->copy_on_read
;
1878 bs_dest
->enable_write_cache
= bs_src
->enable_write_cache
;
1880 /* i/o throttled req */
1881 memcpy(&bs_dest
->throttle_state
,
1882 &bs_src
->throttle_state
,
1883 sizeof(ThrottleState
));
1884 bs_dest
->throttled_reqs
[0] = bs_src
->throttled_reqs
[0];
1885 bs_dest
->throttled_reqs
[1] = bs_src
->throttled_reqs
[1];
1886 bs_dest
->io_limits_enabled
= bs_src
->io_limits_enabled
;
1889 bs_dest
->on_read_error
= bs_src
->on_read_error
;
1890 bs_dest
->on_write_error
= bs_src
->on_write_error
;
1893 bs_dest
->iostatus_enabled
= bs_src
->iostatus_enabled
;
1894 bs_dest
->iostatus
= bs_src
->iostatus
;
1897 bs_dest
->dirty_bitmaps
= bs_src
->dirty_bitmaps
;
1899 /* reference count */
1900 bs_dest
->refcnt
= bs_src
->refcnt
;
1903 bs_dest
->in_use
= bs_src
->in_use
;
1904 bs_dest
->job
= bs_src
->job
;
1906 /* keep the same entry in bdrv_states */
1907 pstrcpy(bs_dest
->device_name
, sizeof(bs_dest
->device_name
),
1908 bs_src
->device_name
);
1909 bs_dest
->device_list
= bs_src
->device_list
;
1913 * Swap bs contents for two image chains while they are live,
1914 * while keeping required fields on the BlockDriverState that is
1915 * actually attached to a device.
1917 * This will modify the BlockDriverState fields, and swap contents
1918 * between bs_new and bs_old. Both bs_new and bs_old are modified.
1920 * bs_new is required to be anonymous.
1922 * This function does not create any image files.
1924 void bdrv_swap(BlockDriverState
*bs_new
, BlockDriverState
*bs_old
)
1926 BlockDriverState tmp
;
1928 /* The code needs to swap the node_name but simply swapping node_list won't
1929 * work so first remove the nodes from the graph list, do the swap then
1930 * insert them back if needed.
1932 if (bs_new
->node_name
[0] != '\0') {
1933 QTAILQ_REMOVE(&graph_bdrv_states
, bs_new
, node_list
);
1935 if (bs_old
->node_name
[0] != '\0') {
1936 QTAILQ_REMOVE(&graph_bdrv_states
, bs_old
, node_list
);
1939 /* bs_new must be anonymous and shouldn't have anything fancy enabled */
1940 assert(bs_new
->device_name
[0] == '\0');
1941 assert(QLIST_EMPTY(&bs_new
->dirty_bitmaps
));
1942 assert(bs_new
->job
== NULL
);
1943 assert(bs_new
->dev
== NULL
);
1944 assert(bs_new
->in_use
== 0);
1945 assert(bs_new
->io_limits_enabled
== false);
1946 assert(!throttle_have_timer(&bs_new
->throttle_state
));
1952 /* there are some fields that should not be swapped, move them back */
1953 bdrv_move_feature_fields(&tmp
, bs_old
);
1954 bdrv_move_feature_fields(bs_old
, bs_new
);
1955 bdrv_move_feature_fields(bs_new
, &tmp
);
1957 /* bs_new shouldn't be in bdrv_states even after the swap! */
1958 assert(bs_new
->device_name
[0] == '\0');
1960 /* Check a few fields that should remain attached to the device */
1961 assert(bs_new
->dev
== NULL
);
1962 assert(bs_new
->job
== NULL
);
1963 assert(bs_new
->in_use
== 0);
1964 assert(bs_new
->io_limits_enabled
== false);
1965 assert(!throttle_have_timer(&bs_new
->throttle_state
));
1967 /* insert the nodes back into the graph node list if needed */
1968 if (bs_new
->node_name
[0] != '\0') {
1969 QTAILQ_INSERT_TAIL(&graph_bdrv_states
, bs_new
, node_list
);
1971 if (bs_old
->node_name
[0] != '\0') {
1972 QTAILQ_INSERT_TAIL(&graph_bdrv_states
, bs_old
, node_list
);
1975 bdrv_rebind(bs_new
);
1976 bdrv_rebind(bs_old
);
1980 * Add new bs contents at the top of an image chain while the chain is
1981 * live, while keeping required fields on the top layer.
1983 * This will modify the BlockDriverState fields, and swap contents
1984 * between bs_new and bs_top. Both bs_new and bs_top are modified.
1986 * bs_new is required to be anonymous.
1988 * This function does not create any image files.
1990 void bdrv_append(BlockDriverState
*bs_new
, BlockDriverState
*bs_top
)
1992 bdrv_swap(bs_new
, bs_top
);
1994 /* The contents of 'tmp' will become bs_top, as we are
1995 * swapping bs_new and bs_top contents. */
1996 bs_top
->backing_hd
= bs_new
;
1997 bs_top
->open_flags
&= ~BDRV_O_NO_BACKING
;
1998 pstrcpy(bs_top
->backing_file
, sizeof(bs_top
->backing_file
),
2000 pstrcpy(bs_top
->backing_format
, sizeof(bs_top
->backing_format
),
2001 bs_new
->drv
? bs_new
->drv
->format_name
: "");
2004 static void bdrv_delete(BlockDriverState
*bs
)
2008 assert(!bs
->in_use
);
2009 assert(!bs
->refcnt
);
2010 assert(QLIST_EMPTY(&bs
->dirty_bitmaps
));
2014 /* remove from list, if necessary */
2020 int bdrv_attach_dev(BlockDriverState
*bs
, void *dev
)
2021 /* TODO change to DeviceState *dev when all users are qdevified */
2027 bdrv_iostatus_reset(bs
);
2031 /* TODO qdevified devices don't use this, remove when devices are qdevified */
2032 void bdrv_attach_dev_nofail(BlockDriverState
*bs
, void *dev
)
2034 if (bdrv_attach_dev(bs
, dev
) < 0) {
2039 void bdrv_detach_dev(BlockDriverState
*bs
, void *dev
)
2040 /* TODO change to DeviceState *dev when all users are qdevified */
2042 assert(bs
->dev
== dev
);
2045 bs
->dev_opaque
= NULL
;
2046 bs
->guest_block_size
= 512;
2049 /* TODO change to return DeviceState * when all users are qdevified */
2050 void *bdrv_get_attached_dev(BlockDriverState
*bs
)
2055 void bdrv_set_dev_ops(BlockDriverState
*bs
, const BlockDevOps
*ops
,
2059 bs
->dev_opaque
= opaque
;
2062 void bdrv_emit_qmp_error_event(const BlockDriverState
*bdrv
,
2063 enum MonitorEvent ev
,
2064 BlockErrorAction action
, bool is_read
)
2067 const char *action_str
;
2070 case BDRV_ACTION_REPORT
:
2071 action_str
= "report";
2073 case BDRV_ACTION_IGNORE
:
2074 action_str
= "ignore";
2076 case BDRV_ACTION_STOP
:
2077 action_str
= "stop";
2083 data
= qobject_from_jsonf("{ 'device': %s, 'action': %s, 'operation': %s }",
2086 is_read
? "read" : "write");
2087 monitor_protocol_event(ev
, data
);
2089 qobject_decref(data
);
2092 static void bdrv_emit_qmp_eject_event(BlockDriverState
*bs
, bool ejected
)
2096 data
= qobject_from_jsonf("{ 'device': %s, 'tray-open': %i }",
2097 bdrv_get_device_name(bs
), ejected
);
2098 monitor_protocol_event(QEVENT_DEVICE_TRAY_MOVED
, data
);
2100 qobject_decref(data
);
2103 static void bdrv_dev_change_media_cb(BlockDriverState
*bs
, bool load
)
2105 if (bs
->dev_ops
&& bs
->dev_ops
->change_media_cb
) {
2106 bool tray_was_closed
= !bdrv_dev_is_tray_open(bs
);
2107 bs
->dev_ops
->change_media_cb(bs
->dev_opaque
, load
);
2108 if (tray_was_closed
) {
2110 bdrv_emit_qmp_eject_event(bs
, true);
2114 bdrv_emit_qmp_eject_event(bs
, false);
2119 bool bdrv_dev_has_removable_media(BlockDriverState
*bs
)
2121 return !bs
->dev
|| (bs
->dev_ops
&& bs
->dev_ops
->change_media_cb
);
2124 void bdrv_dev_eject_request(BlockDriverState
*bs
, bool force
)
2126 if (bs
->dev_ops
&& bs
->dev_ops
->eject_request_cb
) {
2127 bs
->dev_ops
->eject_request_cb(bs
->dev_opaque
, force
);
2131 bool bdrv_dev_is_tray_open(BlockDriverState
*bs
)
2133 if (bs
->dev_ops
&& bs
->dev_ops
->is_tray_open
) {
2134 return bs
->dev_ops
->is_tray_open(bs
->dev_opaque
);
2139 static void bdrv_dev_resize_cb(BlockDriverState
*bs
)
2141 if (bs
->dev_ops
&& bs
->dev_ops
->resize_cb
) {
2142 bs
->dev_ops
->resize_cb(bs
->dev_opaque
);
2146 bool bdrv_dev_is_medium_locked(BlockDriverState
*bs
)
2148 if (bs
->dev_ops
&& bs
->dev_ops
->is_medium_locked
) {
2149 return bs
->dev_ops
->is_medium_locked(bs
->dev_opaque
);
2155 * Run consistency checks on an image
2157 * Returns 0 if the check could be completed (it doesn't mean that the image is
2158 * free of errors) or -errno when an internal error occurred. The results of the
2159 * check are stored in res.
2161 int bdrv_check(BlockDriverState
*bs
, BdrvCheckResult
*res
, BdrvCheckMode fix
)
2163 if (bs
->drv
->bdrv_check
== NULL
) {
2167 memset(res
, 0, sizeof(*res
));
2168 return bs
->drv
->bdrv_check(bs
, res
, fix
);
2171 #define COMMIT_BUF_SECTORS 2048
2173 /* commit COW file into the raw image */
2174 int bdrv_commit(BlockDriverState
*bs
)
2176 BlockDriver
*drv
= bs
->drv
;
2177 int64_t sector
, total_sectors
, length
, backing_length
;
2178 int n
, ro
, open_flags
;
2180 uint8_t *buf
= NULL
;
2181 char filename
[PATH_MAX
];
2186 if (!bs
->backing_hd
) {
2190 if (bdrv_in_use(bs
) || bdrv_in_use(bs
->backing_hd
)) {
2194 ro
= bs
->backing_hd
->read_only
;
2195 /* Use pstrcpy (not strncpy): filename must be NUL-terminated. */
2196 pstrcpy(filename
, sizeof(filename
), bs
->backing_hd
->filename
);
2197 open_flags
= bs
->backing_hd
->open_flags
;
2200 if (bdrv_reopen(bs
->backing_hd
, open_flags
| BDRV_O_RDWR
, NULL
)) {
2205 length
= bdrv_getlength(bs
);
2211 backing_length
= bdrv_getlength(bs
->backing_hd
);
2212 if (backing_length
< 0) {
2213 ret
= backing_length
;
2217 /* If our top snapshot is larger than the backing file image,
2218 * grow the backing file image if possible. If not possible,
2219 * we must return an error */
2220 if (length
> backing_length
) {
2221 ret
= bdrv_truncate(bs
->backing_hd
, length
);
2227 total_sectors
= length
>> BDRV_SECTOR_BITS
;
2228 buf
= g_malloc(COMMIT_BUF_SECTORS
* BDRV_SECTOR_SIZE
);
2230 for (sector
= 0; sector
< total_sectors
; sector
+= n
) {
2231 ret
= bdrv_is_allocated(bs
, sector
, COMMIT_BUF_SECTORS
, &n
);
2236 ret
= bdrv_read(bs
, sector
, buf
, n
);
2241 ret
= bdrv_write(bs
->backing_hd
, sector
, buf
, n
);
2248 if (drv
->bdrv_make_empty
) {
2249 ret
= drv
->bdrv_make_empty(bs
);
2257 * Make sure all data we wrote to the backing device is actually
2260 if (bs
->backing_hd
) {
2261 bdrv_flush(bs
->backing_hd
);
2269 /* ignoring error return here */
2270 bdrv_reopen(bs
->backing_hd
, open_flags
& ~BDRV_O_RDWR
, NULL
);
2276 int bdrv_commit_all(void)
2278 BlockDriverState
*bs
;
2280 QTAILQ_FOREACH(bs
, &bdrv_states
, device_list
) {
2281 if (bs
->drv
&& bs
->backing_hd
) {
2282 int ret
= bdrv_commit(bs
);
2292 * Remove an active request from the tracked requests list
2294 * This function should be called when a tracked request is completing.
2296 static void tracked_request_end(BdrvTrackedRequest
*req
)
2298 if (req
->serialising
) {
2299 req
->bs
->serialising_in_flight
--;
2302 QLIST_REMOVE(req
, list
);
2303 qemu_co_queue_restart_all(&req
->wait_queue
);
2307 * Add an active request to the tracked requests list
2309 static void tracked_request_begin(BdrvTrackedRequest
*req
,
2310 BlockDriverState
*bs
,
2312 unsigned int bytes
, bool is_write
)
2314 *req
= (BdrvTrackedRequest
){
2318 .is_write
= is_write
,
2319 .co
= qemu_coroutine_self(),
2320 .serialising
= false,
2321 .overlap_offset
= offset
,
2322 .overlap_bytes
= bytes
,
2325 qemu_co_queue_init(&req
->wait_queue
);
2327 QLIST_INSERT_HEAD(&bs
->tracked_requests
, req
, list
);
2330 static void mark_request_serialising(BdrvTrackedRequest
*req
, uint64_t align
)
2332 int64_t overlap_offset
= req
->offset
& ~(align
- 1);
2333 unsigned int overlap_bytes
= ROUND_UP(req
->offset
+ req
->bytes
, align
)
2336 if (!req
->serialising
) {
2337 req
->bs
->serialising_in_flight
++;
2338 req
->serialising
= true;
2341 req
->overlap_offset
= MIN(req
->overlap_offset
, overlap_offset
);
2342 req
->overlap_bytes
= MAX(req
->overlap_bytes
, overlap_bytes
);
2346 * Round a region to cluster boundaries
2348 void bdrv_round_to_clusters(BlockDriverState
*bs
,
2349 int64_t sector_num
, int nb_sectors
,
2350 int64_t *cluster_sector_num
,
2351 int *cluster_nb_sectors
)
2353 BlockDriverInfo bdi
;
2355 if (bdrv_get_info(bs
, &bdi
) < 0 || bdi
.cluster_size
== 0) {
2356 *cluster_sector_num
= sector_num
;
2357 *cluster_nb_sectors
= nb_sectors
;
2359 int64_t c
= bdi
.cluster_size
/ BDRV_SECTOR_SIZE
;
2360 *cluster_sector_num
= QEMU_ALIGN_DOWN(sector_num
, c
);
2361 *cluster_nb_sectors
= QEMU_ALIGN_UP(sector_num
- *cluster_sector_num
+
2366 static int bdrv_get_cluster_size(BlockDriverState
*bs
)
2368 BlockDriverInfo bdi
;
2371 ret
= bdrv_get_info(bs
, &bdi
);
2372 if (ret
< 0 || bdi
.cluster_size
== 0) {
2373 return bs
->request_alignment
;
2375 return bdi
.cluster_size
;
2379 static bool tracked_request_overlaps(BdrvTrackedRequest
*req
,
2380 int64_t offset
, unsigned int bytes
)
2383 if (offset
>= req
->overlap_offset
+ req
->overlap_bytes
) {
2387 if (req
->overlap_offset
>= offset
+ bytes
) {
2393 static bool coroutine_fn
wait_serialising_requests(BdrvTrackedRequest
*self
)
2395 BlockDriverState
*bs
= self
->bs
;
2396 BdrvTrackedRequest
*req
;
2398 bool waited
= false;
2400 if (!bs
->serialising_in_flight
) {
2406 QLIST_FOREACH(req
, &bs
->tracked_requests
, list
) {
2407 if (req
== self
|| (!req
->serialising
&& !self
->serialising
)) {
2410 if (tracked_request_overlaps(req
, self
->overlap_offset
,
2411 self
->overlap_bytes
))
2413 /* Hitting this means there was a reentrant request, for
2414 * example, a block driver issuing nested requests. This must
2415 * never happen since it means deadlock.
2417 assert(qemu_coroutine_self() != req
->co
);
2419 /* If the request is already (indirectly) waiting for us, or
2420 * will wait for us as soon as it wakes up, then just go on
2421 * (instead of producing a deadlock in the former case). */
2422 if (!req
->waiting_for
) {
2423 self
->waiting_for
= req
;
2424 qemu_co_queue_wait(&req
->wait_queue
);
2425 self
->waiting_for
= NULL
;
2440 * -EINVAL - backing format specified, but no file
2441 * -ENOSPC - can't update the backing file because no space is left in the
2443 * -ENOTSUP - format driver doesn't support changing the backing file
2445 int bdrv_change_backing_file(BlockDriverState
*bs
,
2446 const char *backing_file
, const char *backing_fmt
)
2448 BlockDriver
*drv
= bs
->drv
;
2451 /* Backing file format doesn't make sense without a backing file */
2452 if (backing_fmt
&& !backing_file
) {
2456 if (drv
->bdrv_change_backing_file
!= NULL
) {
2457 ret
= drv
->bdrv_change_backing_file(bs
, backing_file
, backing_fmt
);
2463 pstrcpy(bs
->backing_file
, sizeof(bs
->backing_file
), backing_file
?: "");
2464 pstrcpy(bs
->backing_format
, sizeof(bs
->backing_format
), backing_fmt
?: "");
2470 * Finds the image layer in the chain that has 'bs' as its backing file.
2472 * active is the current topmost image.
2474 * Returns NULL if bs is not found in active's image chain,
2475 * or if active == bs.
2477 BlockDriverState
*bdrv_find_overlay(BlockDriverState
*active
,
2478 BlockDriverState
*bs
)
2480 BlockDriverState
*overlay
= NULL
;
2481 BlockDriverState
*intermediate
;
2483 assert(active
!= NULL
);
2486 /* if bs is the same as active, then by definition it has no overlay
2492 intermediate
= active
;
2493 while (intermediate
->backing_hd
) {
2494 if (intermediate
->backing_hd
== bs
) {
2495 overlay
= intermediate
;
2498 intermediate
= intermediate
->backing_hd
;
2504 typedef struct BlkIntermediateStates
{
2505 BlockDriverState
*bs
;
2506 QSIMPLEQ_ENTRY(BlkIntermediateStates
) entry
;
2507 } BlkIntermediateStates
;
2511 * Drops images above 'base' up to and including 'top', and sets the image
2512 * above 'top' to have base as its backing file.
2514 * Requires that the overlay to 'top' is opened r/w, so that the backing file
2515 * information in 'bs' can be properly updated.
2517 * E.g., this will convert the following chain:
2518 * bottom <- base <- intermediate <- top <- active
2522 * bottom <- base <- active
2524 * It is allowed for bottom==base, in which case it converts:
2526 * base <- intermediate <- top <- active
2533 * if active == top, that is considered an error
2536 int bdrv_drop_intermediate(BlockDriverState
*active
, BlockDriverState
*top
,
2537 BlockDriverState
*base
)
2539 BlockDriverState
*intermediate
;
2540 BlockDriverState
*base_bs
= NULL
;
2541 BlockDriverState
*new_top_bs
= NULL
;
2542 BlkIntermediateStates
*intermediate_state
, *next
;
2545 QSIMPLEQ_HEAD(states_to_delete
, BlkIntermediateStates
) states_to_delete
;
2546 QSIMPLEQ_INIT(&states_to_delete
);
2548 if (!top
->drv
|| !base
->drv
) {
2552 new_top_bs
= bdrv_find_overlay(active
, top
);
2554 if (new_top_bs
== NULL
) {
2555 /* we could not find the image above 'top', this is an error */
2559 /* special case of new_top_bs->backing_hd already pointing to base - nothing
2560 * to do, no intermediate images */
2561 if (new_top_bs
->backing_hd
== base
) {
2568 /* now we will go down through the list, and add each BDS we find
2569 * into our deletion queue, until we hit the 'base'
2571 while (intermediate
) {
2572 intermediate_state
= g_malloc0(sizeof(BlkIntermediateStates
));
2573 intermediate_state
->bs
= intermediate
;
2574 QSIMPLEQ_INSERT_TAIL(&states_to_delete
, intermediate_state
, entry
);
2576 if (intermediate
->backing_hd
== base
) {
2577 base_bs
= intermediate
->backing_hd
;
2580 intermediate
= intermediate
->backing_hd
;
2582 if (base_bs
== NULL
) {
2583 /* something went wrong, we did not end at the base. safely
2584 * unravel everything, and exit with error */
2588 /* success - we can delete the intermediate states, and link top->base */
2589 ret
= bdrv_change_backing_file(new_top_bs
, base_bs
->filename
,
2590 base_bs
->drv
? base_bs
->drv
->format_name
: "");
2594 new_top_bs
->backing_hd
= base_bs
;
2596 bdrv_refresh_limits(new_top_bs
);
2598 QSIMPLEQ_FOREACH_SAFE(intermediate_state
, &states_to_delete
, entry
, next
) {
2599 /* so that bdrv_close() does not recursively close the chain */
2600 intermediate_state
->bs
->backing_hd
= NULL
;
2601 bdrv_unref(intermediate_state
->bs
);
2606 QSIMPLEQ_FOREACH_SAFE(intermediate_state
, &states_to_delete
, entry
, next
) {
2607 g_free(intermediate_state
);
2613 static int bdrv_check_byte_request(BlockDriverState
*bs
, int64_t offset
,
2618 if (size
> INT_MAX
) {
2622 if (!bdrv_is_inserted(bs
))
2628 len
= bdrv_getlength(bs
);
2633 if ((offset
> len
) || (len
- offset
< size
))
2639 static int bdrv_check_request(BlockDriverState
*bs
, int64_t sector_num
,
2642 if (nb_sectors
< 0 || nb_sectors
> INT_MAX
/ BDRV_SECTOR_SIZE
) {
2646 return bdrv_check_byte_request(bs
, sector_num
* BDRV_SECTOR_SIZE
,
2647 nb_sectors
* BDRV_SECTOR_SIZE
);
2650 typedef struct RwCo
{
2651 BlockDriverState
*bs
;
2656 BdrvRequestFlags flags
;
2659 static void coroutine_fn
bdrv_rw_co_entry(void *opaque
)
2661 RwCo
*rwco
= opaque
;
2663 if (!rwco
->is_write
) {
2664 rwco
->ret
= bdrv_co_do_preadv(rwco
->bs
, rwco
->offset
,
2665 rwco
->qiov
->size
, rwco
->qiov
,
2668 rwco
->ret
= bdrv_co_do_pwritev(rwco
->bs
, rwco
->offset
,
2669 rwco
->qiov
->size
, rwco
->qiov
,
2675 * Process a vectored synchronous request using coroutines
2677 static int bdrv_prwv_co(BlockDriverState
*bs
, int64_t offset
,
2678 QEMUIOVector
*qiov
, bool is_write
,
2679 BdrvRequestFlags flags
)
2686 .is_write
= is_write
,
2692 * In sync call context, when the vcpu is blocked, this throttling timer
2693 * will not fire; so the I/O throttling function has to be disabled here
2694 * if it has been enabled.
2696 if (bs
->io_limits_enabled
) {
2697 fprintf(stderr
, "Disabling I/O throttling on '%s' due "
2698 "to synchronous I/O.\n", bdrv_get_device_name(bs
));
2699 bdrv_io_limits_disable(bs
);
2702 if (qemu_in_coroutine()) {
2703 /* Fast-path if already in coroutine context */
2704 bdrv_rw_co_entry(&rwco
);
2706 co
= qemu_coroutine_create(bdrv_rw_co_entry
);
2707 qemu_coroutine_enter(co
, &rwco
);
2708 while (rwco
.ret
== NOT_DONE
) {
2716 * Process a synchronous request using coroutines
2718 static int bdrv_rw_co(BlockDriverState
*bs
, int64_t sector_num
, uint8_t *buf
,
2719 int nb_sectors
, bool is_write
, BdrvRequestFlags flags
)
2722 struct iovec iov
= {
2723 .iov_base
= (void *)buf
,
2724 .iov_len
= nb_sectors
* BDRV_SECTOR_SIZE
,
2727 if (nb_sectors
< 0 || nb_sectors
> INT_MAX
/ BDRV_SECTOR_SIZE
) {
2731 qemu_iovec_init_external(&qiov
, &iov
, 1);
2732 return bdrv_prwv_co(bs
, sector_num
<< BDRV_SECTOR_BITS
,
2733 &qiov
, is_write
, flags
);
2736 /* return < 0 if error. See bdrv_write() for the return codes */
2737 int bdrv_read(BlockDriverState
*bs
, int64_t sector_num
,
2738 uint8_t *buf
, int nb_sectors
)
2740 return bdrv_rw_co(bs
, sector_num
, buf
, nb_sectors
, false, 0);
2743 /* Just like bdrv_read(), but with I/O throttling temporarily disabled */
2744 int bdrv_read_unthrottled(BlockDriverState
*bs
, int64_t sector_num
,
2745 uint8_t *buf
, int nb_sectors
)
2750 enabled
= bs
->io_limits_enabled
;
2751 bs
->io_limits_enabled
= false;
2752 ret
= bdrv_read(bs
, sector_num
, buf
, nb_sectors
);
2753 bs
->io_limits_enabled
= enabled
;
2757 /* Return < 0 if error. Important errors are:
2758 -EIO generic I/O error (may happen for all errors)
2759 -ENOMEDIUM No media inserted.
2760 -EINVAL Invalid sector number or nb_sectors
2761 -EACCES Trying to write a read-only device
2763 int bdrv_write(BlockDriverState
*bs
, int64_t sector_num
,
2764 const uint8_t *buf
, int nb_sectors
)
2766 return bdrv_rw_co(bs
, sector_num
, (uint8_t *)buf
, nb_sectors
, true, 0);
2769 int bdrv_write_zeroes(BlockDriverState
*bs
, int64_t sector_num
,
2770 int nb_sectors
, BdrvRequestFlags flags
)
2772 return bdrv_rw_co(bs
, sector_num
, NULL
, nb_sectors
, true,
2773 BDRV_REQ_ZERO_WRITE
| flags
);
2777 * Completely zero out a block device with the help of bdrv_write_zeroes.
2778 * The operation is sped up by checking the block status and only writing
2779 * zeroes to the device if they currently do not return zeroes. Optional
2780 * flags are passed through to bdrv_write_zeroes (e.g. BDRV_REQ_MAY_UNMAP).
2782 * Returns < 0 on error, 0 on success. For error codes see bdrv_write().
2784 int bdrv_make_zero(BlockDriverState
*bs
, BdrvRequestFlags flags
)
2786 int64_t target_size
;
2787 int64_t ret
, nb_sectors
, sector_num
= 0;
2790 target_size
= bdrv_getlength(bs
);
2791 if (target_size
< 0) {
2794 target_size
/= BDRV_SECTOR_SIZE
;
2797 nb_sectors
= target_size
- sector_num
;
2798 if (nb_sectors
<= 0) {
2801 if (nb_sectors
> INT_MAX
) {
2802 nb_sectors
= INT_MAX
;
2804 ret
= bdrv_get_block_status(bs
, sector_num
, nb_sectors
, &n
);
2806 error_report("error getting block status at sector %" PRId64
": %s",
2807 sector_num
, strerror(-ret
));
2810 if (ret
& BDRV_BLOCK_ZERO
) {
2814 ret
= bdrv_write_zeroes(bs
, sector_num
, n
, flags
);
2816 error_report("error writing zeroes at sector %" PRId64
": %s",
2817 sector_num
, strerror(-ret
));
2824 int bdrv_pread(BlockDriverState
*bs
, int64_t offset
, void *buf
, int bytes
)
2827 struct iovec iov
= {
2828 .iov_base
= (void *)buf
,
2837 qemu_iovec_init_external(&qiov
, &iov
, 1);
2838 ret
= bdrv_prwv_co(bs
, offset
, &qiov
, false, 0);
2846 int bdrv_pwritev(BlockDriverState
*bs
, int64_t offset
, QEMUIOVector
*qiov
)
2850 ret
= bdrv_prwv_co(bs
, offset
, qiov
, true, 0);
2858 int bdrv_pwrite(BlockDriverState
*bs
, int64_t offset
,
2859 const void *buf
, int bytes
)
2862 struct iovec iov
= {
2863 .iov_base
= (void *) buf
,
2871 qemu_iovec_init_external(&qiov
, &iov
, 1);
2872 return bdrv_pwritev(bs
, offset
, &qiov
);
2876 * Writes to the file and ensures that no writes are reordered across this
2877 * request (acts as a barrier)
2879 * Returns 0 on success, -errno in error cases.
2881 int bdrv_pwrite_sync(BlockDriverState
*bs
, int64_t offset
,
2882 const void *buf
, int count
)
2886 ret
= bdrv_pwrite(bs
, offset
, buf
, count
);
2891 /* No flush needed for cache modes that already do it */
2892 if (bs
->enable_write_cache
) {
2899 static int coroutine_fn
bdrv_co_do_copy_on_readv(BlockDriverState
*bs
,
2900 int64_t sector_num
, int nb_sectors
, QEMUIOVector
*qiov
)
2902 /* Perform I/O through a temporary buffer so that users who scribble over
2903 * their read buffer while the operation is in progress do not end up
2904 * modifying the image file. This is critical for zero-copy guest I/O
2905 * where anything might happen inside guest memory.
2907 void *bounce_buffer
;
2909 BlockDriver
*drv
= bs
->drv
;
2911 QEMUIOVector bounce_qiov
;
2912 int64_t cluster_sector_num
;
2913 int cluster_nb_sectors
;
2917 /* Cover entire cluster so no additional backing file I/O is required when
2918 * allocating cluster in the image file.
2920 bdrv_round_to_clusters(bs
, sector_num
, nb_sectors
,
2921 &cluster_sector_num
, &cluster_nb_sectors
);
2923 trace_bdrv_co_do_copy_on_readv(bs
, sector_num
, nb_sectors
,
2924 cluster_sector_num
, cluster_nb_sectors
);
2926 iov
.iov_len
= cluster_nb_sectors
* BDRV_SECTOR_SIZE
;
2927 iov
.iov_base
= bounce_buffer
= qemu_blockalign(bs
, iov
.iov_len
);
2928 qemu_iovec_init_external(&bounce_qiov
, &iov
, 1);
2930 ret
= drv
->bdrv_co_readv(bs
, cluster_sector_num
, cluster_nb_sectors
,
2936 if (drv
->bdrv_co_write_zeroes
&&
2937 buffer_is_zero(bounce_buffer
, iov
.iov_len
)) {
2938 ret
= bdrv_co_do_write_zeroes(bs
, cluster_sector_num
,
2939 cluster_nb_sectors
, 0);
2941 /* This does not change the data on the disk, it is not necessary
2942 * to flush even in cache=writethrough mode.
2944 ret
= drv
->bdrv_co_writev(bs
, cluster_sector_num
, cluster_nb_sectors
,
2949 /* It might be okay to ignore write errors for guest requests. If this
2950 * is a deliberate copy-on-read then we don't want to ignore the error.
2951 * Simply report it in all cases.
2956 skip_bytes
= (sector_num
- cluster_sector_num
) * BDRV_SECTOR_SIZE
;
2957 qemu_iovec_from_buf(qiov
, 0, bounce_buffer
+ skip_bytes
,
2958 nb_sectors
* BDRV_SECTOR_SIZE
);
2961 qemu_vfree(bounce_buffer
);
2966 * Forwards an already correctly aligned request to the BlockDriver. This
2967 * handles copy on read and zeroing after EOF; any other features must be
2968 * implemented by the caller.
2970 static int coroutine_fn
bdrv_aligned_preadv(BlockDriverState
*bs
,
2971 BdrvTrackedRequest
*req
, int64_t offset
, unsigned int bytes
,
2972 int64_t align
, QEMUIOVector
*qiov
, int flags
)
2974 BlockDriver
*drv
= bs
->drv
;
2977 int64_t sector_num
= offset
>> BDRV_SECTOR_BITS
;
2978 unsigned int nb_sectors
= bytes
>> BDRV_SECTOR_BITS
;
2980 assert((offset
& (BDRV_SECTOR_SIZE
- 1)) == 0);
2981 assert((bytes
& (BDRV_SECTOR_SIZE
- 1)) == 0);
2983 /* Handle Copy on Read and associated serialisation */
2984 if (flags
& BDRV_REQ_COPY_ON_READ
) {
2985 /* If we touch the same cluster it counts as an overlap. This
2986 * guarantees that allocating writes will be serialized and not race
2987 * with each other for the same cluster. For example, in copy-on-read
2988 * it ensures that the CoR read and write operations are atomic and
2989 * guest writes cannot interleave between them. */
2990 mark_request_serialising(req
, bdrv_get_cluster_size(bs
));
2993 wait_serialising_requests(req
);
2995 if (flags
& BDRV_REQ_COPY_ON_READ
) {
2998 ret
= bdrv_is_allocated(bs
, sector_num
, nb_sectors
, &pnum
);
3003 if (!ret
|| pnum
!= nb_sectors
) {
3004 ret
= bdrv_co_do_copy_on_readv(bs
, sector_num
, nb_sectors
, qiov
);
3009 /* Forward the request to the BlockDriver */
3010 if (!(bs
->zero_beyond_eof
&& bs
->growable
)) {
3011 ret
= drv
->bdrv_co_readv(bs
, sector_num
, nb_sectors
, qiov
);
3013 /* Read zeros after EOF of growable BDSes */
3014 int64_t len
, total_sectors
, max_nb_sectors
;
3016 len
= bdrv_getlength(bs
);
3022 total_sectors
= DIV_ROUND_UP(len
, BDRV_SECTOR_SIZE
);
3023 max_nb_sectors
= ROUND_UP(MAX(0, total_sectors
- sector_num
),
3024 align
>> BDRV_SECTOR_BITS
);
3025 if (max_nb_sectors
> 0) {
3026 ret
= drv
->bdrv_co_readv(bs
, sector_num
,
3027 MIN(nb_sectors
, max_nb_sectors
), qiov
);
3032 /* Reading beyond end of file is supposed to produce zeroes */
3033 if (ret
== 0 && total_sectors
< sector_num
+ nb_sectors
) {
3034 uint64_t offset
= MAX(0, total_sectors
- sector_num
);
3035 uint64_t bytes
= (sector_num
+ nb_sectors
- offset
) *
3037 qemu_iovec_memset(qiov
, offset
* BDRV_SECTOR_SIZE
, 0, bytes
);
3046 * Handle a read request in coroutine context
3048 static int coroutine_fn
bdrv_co_do_preadv(BlockDriverState
*bs
,
3049 int64_t offset
, unsigned int bytes
, QEMUIOVector
*qiov
,
3050 BdrvRequestFlags flags
)
3052 BlockDriver
*drv
= bs
->drv
;
3053 BdrvTrackedRequest req
;
3055 /* TODO Lift BDRV_SECTOR_SIZE restriction in BlockDriver interface */
3056 uint64_t align
= MAX(BDRV_SECTOR_SIZE
, bs
->request_alignment
);
3057 uint8_t *head_buf
= NULL
;
3058 uint8_t *tail_buf
= NULL
;
3059 QEMUIOVector local_qiov
;
3060 bool use_local_qiov
= false;
3066 if (bdrv_check_byte_request(bs
, offset
, bytes
)) {
3070 if (bs
->copy_on_read
) {
3071 flags
|= BDRV_REQ_COPY_ON_READ
;
3074 /* throttling disk I/O */
3075 if (bs
->io_limits_enabled
) {
3076 bdrv_io_limits_intercept(bs
, bytes
, false);
3079 /* Align read if necessary by padding qiov */
3080 if (offset
& (align
- 1)) {
3081 head_buf
= qemu_blockalign(bs
, align
);
3082 qemu_iovec_init(&local_qiov
, qiov
->niov
+ 2);
3083 qemu_iovec_add(&local_qiov
, head_buf
, offset
& (align
- 1));
3084 qemu_iovec_concat(&local_qiov
, qiov
, 0, qiov
->size
);
3085 use_local_qiov
= true;
3087 bytes
+= offset
& (align
- 1);
3088 offset
= offset
& ~(align
- 1);
3091 if ((offset
+ bytes
) & (align
- 1)) {
3092 if (!use_local_qiov
) {
3093 qemu_iovec_init(&local_qiov
, qiov
->niov
+ 1);
3094 qemu_iovec_concat(&local_qiov
, qiov
, 0, qiov
->size
);
3095 use_local_qiov
= true;
3097 tail_buf
= qemu_blockalign(bs
, align
);
3098 qemu_iovec_add(&local_qiov
, tail_buf
,
3099 align
- ((offset
+ bytes
) & (align
- 1)));
3101 bytes
= ROUND_UP(bytes
, align
);
3104 tracked_request_begin(&req
, bs
, offset
, bytes
, false);
3105 ret
= bdrv_aligned_preadv(bs
, &req
, offset
, bytes
, align
,
3106 use_local_qiov
? &local_qiov
: qiov
,
3108 tracked_request_end(&req
);
3110 if (use_local_qiov
) {
3111 qemu_iovec_destroy(&local_qiov
);
3112 qemu_vfree(head_buf
);
3113 qemu_vfree(tail_buf
);
3119 static int coroutine_fn
bdrv_co_do_readv(BlockDriverState
*bs
,
3120 int64_t sector_num
, int nb_sectors
, QEMUIOVector
*qiov
,
3121 BdrvRequestFlags flags
)
3123 if (nb_sectors
< 0 || nb_sectors
> (UINT_MAX
>> BDRV_SECTOR_BITS
)) {
3127 return bdrv_co_do_preadv(bs
, sector_num
<< BDRV_SECTOR_BITS
,
3128 nb_sectors
<< BDRV_SECTOR_BITS
, qiov
, flags
);
3131 int coroutine_fn
bdrv_co_readv(BlockDriverState
*bs
, int64_t sector_num
,
3132 int nb_sectors
, QEMUIOVector
*qiov
)
3134 trace_bdrv_co_readv(bs
, sector_num
, nb_sectors
);
3136 return bdrv_co_do_readv(bs
, sector_num
, nb_sectors
, qiov
, 0);
3139 int coroutine_fn
bdrv_co_copy_on_readv(BlockDriverState
*bs
,
3140 int64_t sector_num
, int nb_sectors
, QEMUIOVector
*qiov
)
3142 trace_bdrv_co_copy_on_readv(bs
, sector_num
, nb_sectors
);
3144 return bdrv_co_do_readv(bs
, sector_num
, nb_sectors
, qiov
,
3145 BDRV_REQ_COPY_ON_READ
);
3148 /* if no limit is specified in the BlockLimits use a default
3149 * of 32768 512-byte sectors (16 MiB) per request.
3151 #define MAX_WRITE_ZEROES_DEFAULT 32768
3153 static int coroutine_fn
bdrv_co_do_write_zeroes(BlockDriverState
*bs
,
3154 int64_t sector_num
, int nb_sectors
, BdrvRequestFlags flags
)
3156 BlockDriver
*drv
= bs
->drv
;
3158 struct iovec iov
= {0};
3161 int max_write_zeroes
= bs
->bl
.max_write_zeroes
?
3162 bs
->bl
.max_write_zeroes
: MAX_WRITE_ZEROES_DEFAULT
;
3164 while (nb_sectors
> 0 && !ret
) {
3165 int num
= nb_sectors
;
3167 /* Align request. Block drivers can expect the "bulk" of the request
3170 if (bs
->bl
.write_zeroes_alignment
3171 && num
> bs
->bl
.write_zeroes_alignment
) {
3172 if (sector_num
% bs
->bl
.write_zeroes_alignment
!= 0) {
3173 /* Make a small request up to the first aligned sector. */
3174 num
= bs
->bl
.write_zeroes_alignment
;
3175 num
-= sector_num
% bs
->bl
.write_zeroes_alignment
;
3176 } else if ((sector_num
+ num
) % bs
->bl
.write_zeroes_alignment
!= 0) {
3177 /* Shorten the request to the last aligned sector. num cannot
3178 * underflow because num > bs->bl.write_zeroes_alignment.
3180 num
-= (sector_num
+ num
) % bs
->bl
.write_zeroes_alignment
;
3184 /* limit request size */
3185 if (num
> max_write_zeroes
) {
3186 num
= max_write_zeroes
;
3190 /* First try the efficient write zeroes operation */
3191 if (drv
->bdrv_co_write_zeroes
) {
3192 ret
= drv
->bdrv_co_write_zeroes(bs
, sector_num
, num
, flags
);
3195 if (ret
== -ENOTSUP
) {
3196 /* Fall back to bounce buffer if write zeroes is unsupported */
3197 iov
.iov_len
= num
* BDRV_SECTOR_SIZE
;
3198 if (iov
.iov_base
== NULL
) {
3199 iov
.iov_base
= qemu_blockalign(bs
, num
* BDRV_SECTOR_SIZE
);
3200 memset(iov
.iov_base
, 0, num
* BDRV_SECTOR_SIZE
);
3202 qemu_iovec_init_external(&qiov
, &iov
, 1);
3204 ret
= drv
->bdrv_co_writev(bs
, sector_num
, num
, &qiov
);
3206 /* Keep bounce buffer around if it is big enough for all
3207 * all future requests.
3209 if (num
< max_write_zeroes
) {
3210 qemu_vfree(iov
.iov_base
);
3211 iov
.iov_base
= NULL
;
3219 qemu_vfree(iov
.iov_base
);
3224 * Forwards an already correctly aligned write request to the BlockDriver.
3226 static int coroutine_fn
bdrv_aligned_pwritev(BlockDriverState
*bs
,
3227 BdrvTrackedRequest
*req
, int64_t offset
, unsigned int bytes
,
3228 QEMUIOVector
*qiov
, int flags
)
3230 BlockDriver
*drv
= bs
->drv
;
3234 int64_t sector_num
= offset
>> BDRV_SECTOR_BITS
;
3235 unsigned int nb_sectors
= bytes
>> BDRV_SECTOR_BITS
;
3237 assert((offset
& (BDRV_SECTOR_SIZE
- 1)) == 0);
3238 assert((bytes
& (BDRV_SECTOR_SIZE
- 1)) == 0);
3240 waited
= wait_serialising_requests(req
);
3241 assert(!waited
|| !req
->serialising
);
3242 assert(req
->overlap_offset
<= offset
);
3243 assert(offset
+ bytes
<= req
->overlap_offset
+ req
->overlap_bytes
);
3245 ret
= notifier_with_return_list_notify(&bs
->before_write_notifiers
, req
);
3248 /* Do nothing, write notifier decided to fail this request */
3249 } else if (flags
& BDRV_REQ_ZERO_WRITE
) {
3250 BLKDBG_EVENT(bs
, BLKDBG_PWRITEV_ZERO
);
3251 ret
= bdrv_co_do_write_zeroes(bs
, sector_num
, nb_sectors
, flags
);
3253 BLKDBG_EVENT(bs
, BLKDBG_PWRITEV
);
3254 ret
= drv
->bdrv_co_writev(bs
, sector_num
, nb_sectors
, qiov
);
3256 BLKDBG_EVENT(bs
, BLKDBG_PWRITEV_DONE
);
3258 if (ret
== 0 && !bs
->enable_write_cache
) {
3259 ret
= bdrv_co_flush(bs
);
3262 bdrv_set_dirty(bs
, sector_num
, nb_sectors
);
3264 if (bs
->wr_highest_sector
< sector_num
+ nb_sectors
- 1) {
3265 bs
->wr_highest_sector
= sector_num
+ nb_sectors
- 1;
3267 if (bs
->growable
&& ret
>= 0) {
3268 bs
->total_sectors
= MAX(bs
->total_sectors
, sector_num
+ nb_sectors
);
3275 * Handle a write request in coroutine context
3277 static int coroutine_fn
bdrv_co_do_pwritev(BlockDriverState
*bs
,
3278 int64_t offset
, unsigned int bytes
, QEMUIOVector
*qiov
,
3279 BdrvRequestFlags flags
)
3281 BdrvTrackedRequest req
;
3282 /* TODO Lift BDRV_SECTOR_SIZE restriction in BlockDriver interface */
3283 uint64_t align
= MAX(BDRV_SECTOR_SIZE
, bs
->request_alignment
);
3284 uint8_t *head_buf
= NULL
;
3285 uint8_t *tail_buf
= NULL
;
3286 QEMUIOVector local_qiov
;
3287 bool use_local_qiov
= false;
3293 if (bs
->read_only
) {
3296 if (bdrv_check_byte_request(bs
, offset
, bytes
)) {
3300 /* throttling disk I/O */
3301 if (bs
->io_limits_enabled
) {
3302 bdrv_io_limits_intercept(bs
, bytes
, true);
3306 * Align write if necessary by performing a read-modify-write cycle.
3307 * Pad qiov with the read parts and be sure to have a tracked request not
3308 * only for bdrv_aligned_pwritev, but also for the reads of the RMW cycle.
3310 tracked_request_begin(&req
, bs
, offset
, bytes
, true);
3312 if (offset
& (align
- 1)) {
3313 QEMUIOVector head_qiov
;
3314 struct iovec head_iov
;
3316 mark_request_serialising(&req
, align
);
3317 wait_serialising_requests(&req
);
3319 head_buf
= qemu_blockalign(bs
, align
);
3320 head_iov
= (struct iovec
) {
3321 .iov_base
= head_buf
,
3324 qemu_iovec_init_external(&head_qiov
, &head_iov
, 1);
3326 BLKDBG_EVENT(bs
, BLKDBG_PWRITEV_RMW_HEAD
);
3327 ret
= bdrv_aligned_preadv(bs
, &req
, offset
& ~(align
- 1), align
,
3328 align
, &head_qiov
, 0);
3332 BLKDBG_EVENT(bs
, BLKDBG_PWRITEV_RMW_AFTER_HEAD
);
3334 qemu_iovec_init(&local_qiov
, qiov
->niov
+ 2);
3335 qemu_iovec_add(&local_qiov
, head_buf
, offset
& (align
- 1));
3336 qemu_iovec_concat(&local_qiov
, qiov
, 0, qiov
->size
);
3337 use_local_qiov
= true;
3339 bytes
+= offset
& (align
- 1);
3340 offset
= offset
& ~(align
- 1);
3343 if ((offset
+ bytes
) & (align
- 1)) {
3344 QEMUIOVector tail_qiov
;
3345 struct iovec tail_iov
;
3349 mark_request_serialising(&req
, align
);
3350 waited
= wait_serialising_requests(&req
);
3351 assert(!waited
|| !use_local_qiov
);
3353 tail_buf
= qemu_blockalign(bs
, align
);
3354 tail_iov
= (struct iovec
) {
3355 .iov_base
= tail_buf
,
3358 qemu_iovec_init_external(&tail_qiov
, &tail_iov
, 1);
3360 BLKDBG_EVENT(bs
, BLKDBG_PWRITEV_RMW_TAIL
);
3361 ret
= bdrv_aligned_preadv(bs
, &req
, (offset
+ bytes
) & ~(align
- 1), align
,
3362 align
, &tail_qiov
, 0);
3366 BLKDBG_EVENT(bs
, BLKDBG_PWRITEV_RMW_AFTER_TAIL
);
3368 if (!use_local_qiov
) {
3369 qemu_iovec_init(&local_qiov
, qiov
->niov
+ 1);
3370 qemu_iovec_concat(&local_qiov
, qiov
, 0, qiov
->size
);
3371 use_local_qiov
= true;
3374 tail_bytes
= (offset
+ bytes
) & (align
- 1);
3375 qemu_iovec_add(&local_qiov
, tail_buf
+ tail_bytes
, align
- tail_bytes
);
3377 bytes
= ROUND_UP(bytes
, align
);
3380 ret
= bdrv_aligned_pwritev(bs
, &req
, offset
, bytes
,
3381 use_local_qiov
? &local_qiov
: qiov
,
3385 tracked_request_end(&req
);
3387 if (use_local_qiov
) {
3388 qemu_iovec_destroy(&local_qiov
);
3390 qemu_vfree(head_buf
);
3391 qemu_vfree(tail_buf
);
3396 static int coroutine_fn
bdrv_co_do_writev(BlockDriverState
*bs
,
3397 int64_t sector_num
, int nb_sectors
, QEMUIOVector
*qiov
,
3398 BdrvRequestFlags flags
)
3400 if (nb_sectors
< 0 || nb_sectors
> (INT_MAX
>> BDRV_SECTOR_BITS
)) {
3404 return bdrv_co_do_pwritev(bs
, sector_num
<< BDRV_SECTOR_BITS
,
3405 nb_sectors
<< BDRV_SECTOR_BITS
, qiov
, flags
);
3408 int coroutine_fn
bdrv_co_writev(BlockDriverState
*bs
, int64_t sector_num
,
3409 int nb_sectors
, QEMUIOVector
*qiov
)
3411 trace_bdrv_co_writev(bs
, sector_num
, nb_sectors
);
3413 return bdrv_co_do_writev(bs
, sector_num
, nb_sectors
, qiov
, 0);
3416 int coroutine_fn
bdrv_co_write_zeroes(BlockDriverState
*bs
,
3417 int64_t sector_num
, int nb_sectors
,
3418 BdrvRequestFlags flags
)
3420 trace_bdrv_co_write_zeroes(bs
, sector_num
, nb_sectors
, flags
);
3422 if (!(bs
->open_flags
& BDRV_O_UNMAP
)) {
3423 flags
&= ~BDRV_REQ_MAY_UNMAP
;
3426 return bdrv_co_do_writev(bs
, sector_num
, nb_sectors
, NULL
,
3427 BDRV_REQ_ZERO_WRITE
| flags
);
3431 * Truncate file to 'offset' bytes (needed only for file protocols)
3433 int bdrv_truncate(BlockDriverState
*bs
, int64_t offset
)
3435 BlockDriver
*drv
= bs
->drv
;
3439 if (!drv
->bdrv_truncate
)
3443 if (bdrv_in_use(bs
))
3445 ret
= drv
->bdrv_truncate(bs
, offset
);
3447 ret
= refresh_total_sectors(bs
, offset
>> BDRV_SECTOR_BITS
);
3448 bdrv_dev_resize_cb(bs
);
3454 * Length of a allocated file in bytes. Sparse files are counted by actual
3455 * allocated space. Return < 0 if error or unknown.
3457 int64_t bdrv_get_allocated_file_size(BlockDriverState
*bs
)
3459 BlockDriver
*drv
= bs
->drv
;
3463 if (drv
->bdrv_get_allocated_file_size
) {
3464 return drv
->bdrv_get_allocated_file_size(bs
);
3467 return bdrv_get_allocated_file_size(bs
->file
);
3473 * Length of a file in bytes. Return < 0 if error or unknown.
3475 int64_t bdrv_getlength(BlockDriverState
*bs
)
3477 BlockDriver
*drv
= bs
->drv
;
3481 if (drv
->has_variable_length
) {
3482 int ret
= refresh_total_sectors(bs
, bs
->total_sectors
);
3487 return bs
->total_sectors
* BDRV_SECTOR_SIZE
;
3490 /* return 0 as number of sectors if no device present or error */
3491 void bdrv_get_geometry(BlockDriverState
*bs
, uint64_t *nb_sectors_ptr
)
3494 length
= bdrv_getlength(bs
);
3498 length
= length
>> BDRV_SECTOR_BITS
;
3499 *nb_sectors_ptr
= length
;
3502 void bdrv_set_on_error(BlockDriverState
*bs
, BlockdevOnError on_read_error
,
3503 BlockdevOnError on_write_error
)
3505 bs
->on_read_error
= on_read_error
;
3506 bs
->on_write_error
= on_write_error
;
3509 BlockdevOnError
bdrv_get_on_error(BlockDriverState
*bs
, bool is_read
)
3511 return is_read
? bs
->on_read_error
: bs
->on_write_error
;
3514 BlockErrorAction
bdrv_get_error_action(BlockDriverState
*bs
, bool is_read
, int error
)
3516 BlockdevOnError on_err
= is_read
? bs
->on_read_error
: bs
->on_write_error
;
3519 case BLOCKDEV_ON_ERROR_ENOSPC
:
3520 return (error
== ENOSPC
) ? BDRV_ACTION_STOP
: BDRV_ACTION_REPORT
;
3521 case BLOCKDEV_ON_ERROR_STOP
:
3522 return BDRV_ACTION_STOP
;
3523 case BLOCKDEV_ON_ERROR_REPORT
:
3524 return BDRV_ACTION_REPORT
;
3525 case BLOCKDEV_ON_ERROR_IGNORE
:
3526 return BDRV_ACTION_IGNORE
;
3532 /* This is done by device models because, while the block layer knows
3533 * about the error, it does not know whether an operation comes from
3534 * the device or the block layer (from a job, for example).
3536 void bdrv_error_action(BlockDriverState
*bs
, BlockErrorAction action
,
3537 bool is_read
, int error
)
3540 bdrv_emit_qmp_error_event(bs
, QEVENT_BLOCK_IO_ERROR
, action
, is_read
);
3541 if (action
== BDRV_ACTION_STOP
) {
3542 vm_stop(RUN_STATE_IO_ERROR
);
3543 bdrv_iostatus_set_err(bs
, error
);
3547 int bdrv_is_read_only(BlockDriverState
*bs
)
3549 return bs
->read_only
;
3552 int bdrv_is_sg(BlockDriverState
*bs
)
3557 int bdrv_enable_write_cache(BlockDriverState
*bs
)
3559 return bs
->enable_write_cache
;
3562 void bdrv_set_enable_write_cache(BlockDriverState
*bs
, bool wce
)
3564 bs
->enable_write_cache
= wce
;
3566 /* so a reopen() will preserve wce */
3568 bs
->open_flags
|= BDRV_O_CACHE_WB
;
3570 bs
->open_flags
&= ~BDRV_O_CACHE_WB
;
3574 int bdrv_is_encrypted(BlockDriverState
*bs
)
3576 if (bs
->backing_hd
&& bs
->backing_hd
->encrypted
)
3578 return bs
->encrypted
;
3581 int bdrv_key_required(BlockDriverState
*bs
)
3583 BlockDriverState
*backing_hd
= bs
->backing_hd
;
3585 if (backing_hd
&& backing_hd
->encrypted
&& !backing_hd
->valid_key
)
3587 return (bs
->encrypted
&& !bs
->valid_key
);
3590 int bdrv_set_key(BlockDriverState
*bs
, const char *key
)
3593 if (bs
->backing_hd
&& bs
->backing_hd
->encrypted
) {
3594 ret
= bdrv_set_key(bs
->backing_hd
, key
);
3600 if (!bs
->encrypted
) {
3602 } else if (!bs
->drv
|| !bs
->drv
->bdrv_set_key
) {
3605 ret
= bs
->drv
->bdrv_set_key(bs
, key
);
3608 } else if (!bs
->valid_key
) {
3610 /* call the change callback now, we skipped it on open */
3611 bdrv_dev_change_media_cb(bs
, true);
3616 const char *bdrv_get_format_name(BlockDriverState
*bs
)
3618 return bs
->drv
? bs
->drv
->format_name
: NULL
;
3621 void bdrv_iterate_format(void (*it
)(void *opaque
, const char *name
),
3626 const char **formats
= NULL
;
3628 QLIST_FOREACH(drv
, &bdrv_drivers
, list
) {
3629 if (drv
->format_name
) {
3632 while (formats
&& i
&& !found
) {
3633 found
= !strcmp(formats
[--i
], drv
->format_name
);
3637 formats
= g_realloc(formats
, (count
+ 1) * sizeof(char *));
3638 formats
[count
++] = drv
->format_name
;
3639 it(opaque
, drv
->format_name
);
3646 /* This function is to find block backend bs */
3647 BlockDriverState
*bdrv_find(const char *name
)
3649 BlockDriverState
*bs
;
3651 QTAILQ_FOREACH(bs
, &bdrv_states
, device_list
) {
3652 if (!strcmp(name
, bs
->device_name
)) {
3659 /* This function is to find a node in the bs graph */
3660 BlockDriverState
*bdrv_find_node(const char *node_name
)
3662 BlockDriverState
*bs
;
3666 QTAILQ_FOREACH(bs
, &graph_bdrv_states
, node_list
) {
3667 if (!strcmp(node_name
, bs
->node_name
)) {
3674 /* Put this QMP function here so it can access the static graph_bdrv_states. */
3675 BlockDeviceInfoList
*bdrv_named_nodes_list(void)
3677 BlockDeviceInfoList
*list
, *entry
;
3678 BlockDriverState
*bs
;
3681 QTAILQ_FOREACH(bs
, &graph_bdrv_states
, node_list
) {
3682 entry
= g_malloc0(sizeof(*entry
));
3683 entry
->value
= bdrv_block_device_info(bs
);
3691 BlockDriverState
*bdrv_lookup_bs(const char *device
,
3692 const char *node_name
,
3695 BlockDriverState
*bs
= NULL
;
3698 bs
= bdrv_find(device
);
3706 bs
= bdrv_find_node(node_name
);
3713 error_setg(errp
, "Cannot find device=%s nor node_name=%s",
3714 device
? device
: "",
3715 node_name
? node_name
: "");
3719 BlockDriverState
*bdrv_next(BlockDriverState
*bs
)
3722 return QTAILQ_FIRST(&bdrv_states
);
3724 return QTAILQ_NEXT(bs
, device_list
);
3727 void bdrv_iterate(void (*it
)(void *opaque
, BlockDriverState
*bs
), void *opaque
)
3729 BlockDriverState
*bs
;
3731 QTAILQ_FOREACH(bs
, &bdrv_states
, device_list
) {
3736 const char *bdrv_get_device_name(BlockDriverState
*bs
)
3738 return bs
->device_name
;
3741 int bdrv_get_flags(BlockDriverState
*bs
)
3743 return bs
->open_flags
;
3746 int bdrv_flush_all(void)
3748 BlockDriverState
*bs
;
3751 QTAILQ_FOREACH(bs
, &bdrv_states
, device_list
) {
3752 int ret
= bdrv_flush(bs
);
3753 if (ret
< 0 && !result
) {
3761 int bdrv_has_zero_init_1(BlockDriverState
*bs
)
3766 int bdrv_has_zero_init(BlockDriverState
*bs
)
3770 /* If BS is a copy on write image, it is initialized to
3771 the contents of the base image, which may not be zeroes. */
3772 if (bs
->backing_hd
) {
3775 if (bs
->drv
->bdrv_has_zero_init
) {
3776 return bs
->drv
->bdrv_has_zero_init(bs
);
3783 bool bdrv_unallocated_blocks_are_zero(BlockDriverState
*bs
)
3785 BlockDriverInfo bdi
;
3787 if (bs
->backing_hd
) {
3791 if (bdrv_get_info(bs
, &bdi
) == 0) {
3792 return bdi
.unallocated_blocks_are_zero
;
3798 bool bdrv_can_write_zeroes_with_unmap(BlockDriverState
*bs
)
3800 BlockDriverInfo bdi
;
3802 if (bs
->backing_hd
|| !(bs
->open_flags
& BDRV_O_UNMAP
)) {
3806 if (bdrv_get_info(bs
, &bdi
) == 0) {
3807 return bdi
.can_write_zeroes_with_unmap
;
3813 typedef struct BdrvCoGetBlockStatusData
{
3814 BlockDriverState
*bs
;
3815 BlockDriverState
*base
;
3821 } BdrvCoGetBlockStatusData
;
3824 * Returns true iff the specified sector is present in the disk image. Drivers
3825 * not implementing the functionality are assumed to not support backing files,
3826 * hence all their sectors are reported as allocated.
3828 * If 'sector_num' is beyond the end of the disk image the return value is 0
3829 * and 'pnum' is set to 0.
3831 * 'pnum' is set to the number of sectors (including and immediately following
3832 * the specified sector) that are known to be in the same
3833 * allocated/unallocated state.
3835 * 'nb_sectors' is the max value 'pnum' should be set to. If nb_sectors goes
3836 * beyond the end of the disk image it will be clamped.
3838 static int64_t coroutine_fn
bdrv_co_get_block_status(BlockDriverState
*bs
,
3840 int nb_sectors
, int *pnum
)
3846 length
= bdrv_getlength(bs
);
3851 if (sector_num
>= (length
>> BDRV_SECTOR_BITS
)) {
3856 n
= bs
->total_sectors
- sector_num
;
3857 if (n
< nb_sectors
) {
3861 if (!bs
->drv
->bdrv_co_get_block_status
) {
3863 ret
= BDRV_BLOCK_DATA
;
3864 if (bs
->drv
->protocol_name
) {
3865 ret
|= BDRV_BLOCK_OFFSET_VALID
| (sector_num
* BDRV_SECTOR_SIZE
);
3870 ret
= bs
->drv
->bdrv_co_get_block_status(bs
, sector_num
, nb_sectors
, pnum
);
3876 if (ret
& BDRV_BLOCK_RAW
) {
3877 assert(ret
& BDRV_BLOCK_OFFSET_VALID
);
3878 return bdrv_get_block_status(bs
->file
, ret
>> BDRV_SECTOR_BITS
,
3882 if (!(ret
& BDRV_BLOCK_DATA
) && !(ret
& BDRV_BLOCK_ZERO
)) {
3883 if (bdrv_unallocated_blocks_are_zero(bs
)) {
3884 ret
|= BDRV_BLOCK_ZERO
;
3885 } else if (bs
->backing_hd
) {
3886 BlockDriverState
*bs2
= bs
->backing_hd
;
3887 int64_t length2
= bdrv_getlength(bs2
);
3888 if (length2
>= 0 && sector_num
>= (length2
>> BDRV_SECTOR_BITS
)) {
3889 ret
|= BDRV_BLOCK_ZERO
;
3895 (ret
& BDRV_BLOCK_DATA
) && !(ret
& BDRV_BLOCK_ZERO
) &&
3896 (ret
& BDRV_BLOCK_OFFSET_VALID
)) {
3897 ret2
= bdrv_co_get_block_status(bs
->file
, ret
>> BDRV_SECTOR_BITS
,
3900 /* Ignore errors. This is just providing extra information, it
3901 * is useful but not necessary.
3903 ret
|= (ret2
& BDRV_BLOCK_ZERO
);
3910 /* Coroutine wrapper for bdrv_get_block_status() */
3911 static void coroutine_fn
bdrv_get_block_status_co_entry(void *opaque
)
3913 BdrvCoGetBlockStatusData
*data
= opaque
;
3914 BlockDriverState
*bs
= data
->bs
;
3916 data
->ret
= bdrv_co_get_block_status(bs
, data
->sector_num
, data
->nb_sectors
,
3922 * Synchronous wrapper around bdrv_co_get_block_status().
3924 * See bdrv_co_get_block_status() for details.
3926 int64_t bdrv_get_block_status(BlockDriverState
*bs
, int64_t sector_num
,
3927 int nb_sectors
, int *pnum
)
3930 BdrvCoGetBlockStatusData data
= {
3932 .sector_num
= sector_num
,
3933 .nb_sectors
= nb_sectors
,
3938 if (qemu_in_coroutine()) {
3939 /* Fast-path if already in coroutine context */
3940 bdrv_get_block_status_co_entry(&data
);
3942 co
= qemu_coroutine_create(bdrv_get_block_status_co_entry
);
3943 qemu_coroutine_enter(co
, &data
);
3944 while (!data
.done
) {
3951 int coroutine_fn
bdrv_is_allocated(BlockDriverState
*bs
, int64_t sector_num
,
3952 int nb_sectors
, int *pnum
)
3954 int64_t ret
= bdrv_get_block_status(bs
, sector_num
, nb_sectors
, pnum
);
3959 (ret
& BDRV_BLOCK_DATA
) ||
3960 ((ret
& BDRV_BLOCK_ZERO
) && !bdrv_has_zero_init(bs
));
3964 * Given an image chain: ... -> [BASE] -> [INTER1] -> [INTER2] -> [TOP]
3966 * Return true if the given sector is allocated in any image between
3967 * BASE and TOP (inclusive). BASE can be NULL to check if the given
3968 * sector is allocated in any image of the chain. Return false otherwise.
3970 * 'pnum' is set to the number of sectors (including and immediately following
3971 * the specified sector) that are known to be in the same
3972 * allocated/unallocated state.
3975 int bdrv_is_allocated_above(BlockDriverState
*top
,
3976 BlockDriverState
*base
,
3978 int nb_sectors
, int *pnum
)
3980 BlockDriverState
*intermediate
;
3981 int ret
, n
= nb_sectors
;
3984 while (intermediate
&& intermediate
!= base
) {
3986 ret
= bdrv_is_allocated(intermediate
, sector_num
, nb_sectors
,
3996 * [sector_num, nb_sectors] is unallocated on top but intermediate
3999 * [sector_num+x, nr_sectors] allocated.
4001 if (n
> pnum_inter
&&
4002 (intermediate
== top
||
4003 sector_num
+ pnum_inter
< intermediate
->total_sectors
)) {
4007 intermediate
= intermediate
->backing_hd
;
4014 const char *bdrv_get_encrypted_filename(BlockDriverState
*bs
)
4016 if (bs
->backing_hd
&& bs
->backing_hd
->encrypted
)
4017 return bs
->backing_file
;
4018 else if (bs
->encrypted
)
4019 return bs
->filename
;
4024 void bdrv_get_backing_filename(BlockDriverState
*bs
,
4025 char *filename
, int filename_size
)
4027 pstrcpy(filename
, filename_size
, bs
->backing_file
);
4030 int bdrv_write_compressed(BlockDriverState
*bs
, int64_t sector_num
,
4031 const uint8_t *buf
, int nb_sectors
)
4033 BlockDriver
*drv
= bs
->drv
;
4036 if (!drv
->bdrv_write_compressed
)
4038 if (bdrv_check_request(bs
, sector_num
, nb_sectors
))
4041 assert(QLIST_EMPTY(&bs
->dirty_bitmaps
));
4043 return drv
->bdrv_write_compressed(bs
, sector_num
, buf
, nb_sectors
);
4046 int bdrv_get_info(BlockDriverState
*bs
, BlockDriverInfo
*bdi
)
4048 BlockDriver
*drv
= bs
->drv
;
4051 if (!drv
->bdrv_get_info
)
4053 memset(bdi
, 0, sizeof(*bdi
));
4054 return drv
->bdrv_get_info(bs
, bdi
);
4057 ImageInfoSpecific
*bdrv_get_specific_info(BlockDriverState
*bs
)
4059 BlockDriver
*drv
= bs
->drv
;
4060 if (drv
&& drv
->bdrv_get_specific_info
) {
4061 return drv
->bdrv_get_specific_info(bs
);
4066 int bdrv_save_vmstate(BlockDriverState
*bs
, const uint8_t *buf
,
4067 int64_t pos
, int size
)
4070 struct iovec iov
= {
4071 .iov_base
= (void *) buf
,
4075 qemu_iovec_init_external(&qiov
, &iov
, 1);
4076 return bdrv_writev_vmstate(bs
, &qiov
, pos
);
4079 int bdrv_writev_vmstate(BlockDriverState
*bs
, QEMUIOVector
*qiov
, int64_t pos
)
4081 BlockDriver
*drv
= bs
->drv
;
4085 } else if (drv
->bdrv_save_vmstate
) {
4086 return drv
->bdrv_save_vmstate(bs
, qiov
, pos
);
4087 } else if (bs
->file
) {
4088 return bdrv_writev_vmstate(bs
->file
, qiov
, pos
);
4094 int bdrv_load_vmstate(BlockDriverState
*bs
, uint8_t *buf
,
4095 int64_t pos
, int size
)
4097 BlockDriver
*drv
= bs
->drv
;
4100 if (drv
->bdrv_load_vmstate
)
4101 return drv
->bdrv_load_vmstate(bs
, buf
, pos
, size
);
4103 return bdrv_load_vmstate(bs
->file
, buf
, pos
, size
);
4107 void bdrv_debug_event(BlockDriverState
*bs
, BlkDebugEvent event
)
4109 if (!bs
|| !bs
->drv
|| !bs
->drv
->bdrv_debug_event
) {
4113 bs
->drv
->bdrv_debug_event(bs
, event
);
4116 int bdrv_debug_breakpoint(BlockDriverState
*bs
, const char *event
,
4119 while (bs
&& bs
->drv
&& !bs
->drv
->bdrv_debug_breakpoint
) {
4123 if (bs
&& bs
->drv
&& bs
->drv
->bdrv_debug_breakpoint
) {
4124 return bs
->drv
->bdrv_debug_breakpoint(bs
, event
, tag
);
4130 int bdrv_debug_remove_breakpoint(BlockDriverState
*bs
, const char *tag
)
4132 while (bs
&& bs
->drv
&& !bs
->drv
->bdrv_debug_remove_breakpoint
) {
4136 if (bs
&& bs
->drv
&& bs
->drv
->bdrv_debug_remove_breakpoint
) {
4137 return bs
->drv
->bdrv_debug_remove_breakpoint(bs
, tag
);
4143 int bdrv_debug_resume(BlockDriverState
*bs
, const char *tag
)
4145 while (bs
&& (!bs
->drv
|| !bs
->drv
->bdrv_debug_resume
)) {
4149 if (bs
&& bs
->drv
&& bs
->drv
->bdrv_debug_resume
) {
4150 return bs
->drv
->bdrv_debug_resume(bs
, tag
);
4156 bool bdrv_debug_is_suspended(BlockDriverState
*bs
, const char *tag
)
4158 while (bs
&& bs
->drv
&& !bs
->drv
->bdrv_debug_is_suspended
) {
4162 if (bs
&& bs
->drv
&& bs
->drv
->bdrv_debug_is_suspended
) {
4163 return bs
->drv
->bdrv_debug_is_suspended(bs
, tag
);
4169 int bdrv_is_snapshot(BlockDriverState
*bs
)
4171 return !!(bs
->open_flags
& BDRV_O_SNAPSHOT
);
4174 /* backing_file can either be relative, or absolute, or a protocol. If it is
4175 * relative, it must be relative to the chain. So, passing in bs->filename
4176 * from a BDS as backing_file should not be done, as that may be relative to
4177 * the CWD rather than the chain. */
4178 BlockDriverState
*bdrv_find_backing_image(BlockDriverState
*bs
,
4179 const char *backing_file
)
4181 char *filename_full
= NULL
;
4182 char *backing_file_full
= NULL
;
4183 char *filename_tmp
= NULL
;
4184 int is_protocol
= 0;
4185 BlockDriverState
*curr_bs
= NULL
;
4186 BlockDriverState
*retval
= NULL
;
4188 if (!bs
|| !bs
->drv
|| !backing_file
) {
4192 filename_full
= g_malloc(PATH_MAX
);
4193 backing_file_full
= g_malloc(PATH_MAX
);
4194 filename_tmp
= g_malloc(PATH_MAX
);
4196 is_protocol
= path_has_protocol(backing_file
);
4198 for (curr_bs
= bs
; curr_bs
->backing_hd
; curr_bs
= curr_bs
->backing_hd
) {
4200 /* If either of the filename paths is actually a protocol, then
4201 * compare unmodified paths; otherwise make paths relative */
4202 if (is_protocol
|| path_has_protocol(curr_bs
->backing_file
)) {
4203 if (strcmp(backing_file
, curr_bs
->backing_file
) == 0) {
4204 retval
= curr_bs
->backing_hd
;
4208 /* If not an absolute filename path, make it relative to the current
4209 * image's filename path */
4210 path_combine(filename_tmp
, PATH_MAX
, curr_bs
->filename
,
4213 /* We are going to compare absolute pathnames */
4214 if (!realpath(filename_tmp
, filename_full
)) {
4218 /* We need to make sure the backing filename we are comparing against
4219 * is relative to the current image filename (or absolute) */
4220 path_combine(filename_tmp
, PATH_MAX
, curr_bs
->filename
,
4221 curr_bs
->backing_file
);
4223 if (!realpath(filename_tmp
, backing_file_full
)) {
4227 if (strcmp(backing_file_full
, filename_full
) == 0) {
4228 retval
= curr_bs
->backing_hd
;
4234 g_free(filename_full
);
4235 g_free(backing_file_full
);
4236 g_free(filename_tmp
);
4240 int bdrv_get_backing_file_depth(BlockDriverState
*bs
)
4246 if (!bs
->backing_hd
) {
4250 return 1 + bdrv_get_backing_file_depth(bs
->backing_hd
);
4253 BlockDriverState
*bdrv_find_base(BlockDriverState
*bs
)
4255 BlockDriverState
*curr_bs
= NULL
;
4263 while (curr_bs
->backing_hd
) {
4264 curr_bs
= curr_bs
->backing_hd
;
4269 /**************************************************************/
4272 BlockDriverAIOCB
*bdrv_aio_readv(BlockDriverState
*bs
, int64_t sector_num
,
4273 QEMUIOVector
*qiov
, int nb_sectors
,
4274 BlockDriverCompletionFunc
*cb
, void *opaque
)
4276 trace_bdrv_aio_readv(bs
, sector_num
, nb_sectors
, opaque
);
4278 return bdrv_co_aio_rw_vector(bs
, sector_num
, qiov
, nb_sectors
, 0,
4282 BlockDriverAIOCB
*bdrv_aio_writev(BlockDriverState
*bs
, int64_t sector_num
,
4283 QEMUIOVector
*qiov
, int nb_sectors
,
4284 BlockDriverCompletionFunc
*cb
, void *opaque
)
4286 trace_bdrv_aio_writev(bs
, sector_num
, nb_sectors
, opaque
);
4288 return bdrv_co_aio_rw_vector(bs
, sector_num
, qiov
, nb_sectors
, 0,
4292 BlockDriverAIOCB
*bdrv_aio_write_zeroes(BlockDriverState
*bs
,
4293 int64_t sector_num
, int nb_sectors
, BdrvRequestFlags flags
,
4294 BlockDriverCompletionFunc
*cb
, void *opaque
)
4296 trace_bdrv_aio_write_zeroes(bs
, sector_num
, nb_sectors
, flags
, opaque
);
4298 return bdrv_co_aio_rw_vector(bs
, sector_num
, NULL
, nb_sectors
,
4299 BDRV_REQ_ZERO_WRITE
| flags
,
4304 typedef struct MultiwriteCB
{
4309 BlockDriverCompletionFunc
*cb
;
4311 QEMUIOVector
*free_qiov
;
4315 static void multiwrite_user_cb(MultiwriteCB
*mcb
)
4319 for (i
= 0; i
< mcb
->num_callbacks
; i
++) {
4320 mcb
->callbacks
[i
].cb(mcb
->callbacks
[i
].opaque
, mcb
->error
);
4321 if (mcb
->callbacks
[i
].free_qiov
) {
4322 qemu_iovec_destroy(mcb
->callbacks
[i
].free_qiov
);
4324 g_free(mcb
->callbacks
[i
].free_qiov
);
4328 static void multiwrite_cb(void *opaque
, int ret
)
4330 MultiwriteCB
*mcb
= opaque
;
4332 trace_multiwrite_cb(mcb
, ret
);
4334 if (ret
< 0 && !mcb
->error
) {
4338 mcb
->num_requests
--;
4339 if (mcb
->num_requests
== 0) {
4340 multiwrite_user_cb(mcb
);
4345 static int multiwrite_req_compare(const void *a
, const void *b
)
4347 const BlockRequest
*req1
= a
, *req2
= b
;
4350 * Note that we can't simply subtract req2->sector from req1->sector
4351 * here as that could overflow the return value.
4353 if (req1
->sector
> req2
->sector
) {
4355 } else if (req1
->sector
< req2
->sector
) {
4363 * Takes a bunch of requests and tries to merge them. Returns the number of
4364 * requests that remain after merging.
4366 static int multiwrite_merge(BlockDriverState
*bs
, BlockRequest
*reqs
,
4367 int num_reqs
, MultiwriteCB
*mcb
)
4371 // Sort requests by start sector
4372 qsort(reqs
, num_reqs
, sizeof(*reqs
), &multiwrite_req_compare
);
4374 // Check if adjacent requests touch the same clusters. If so, combine them,
4375 // filling up gaps with zero sectors.
4377 for (i
= 1; i
< num_reqs
; i
++) {
4379 int64_t oldreq_last
= reqs
[outidx
].sector
+ reqs
[outidx
].nb_sectors
;
4381 // Handle exactly sequential writes and overlapping writes.
4382 if (reqs
[i
].sector
<= oldreq_last
) {
4386 if (reqs
[outidx
].qiov
->niov
+ reqs
[i
].qiov
->niov
+ 1 > IOV_MAX
) {
4392 QEMUIOVector
*qiov
= g_malloc0(sizeof(*qiov
));
4393 qemu_iovec_init(qiov
,
4394 reqs
[outidx
].qiov
->niov
+ reqs
[i
].qiov
->niov
+ 1);
4396 // Add the first request to the merged one. If the requests are
4397 // overlapping, drop the last sectors of the first request.
4398 size
= (reqs
[i
].sector
- reqs
[outidx
].sector
) << 9;
4399 qemu_iovec_concat(qiov
, reqs
[outidx
].qiov
, 0, size
);
4401 // We should need to add any zeros between the two requests
4402 assert (reqs
[i
].sector
<= oldreq_last
);
4404 // Add the second request
4405 qemu_iovec_concat(qiov
, reqs
[i
].qiov
, 0, reqs
[i
].qiov
->size
);
4407 reqs
[outidx
].nb_sectors
= qiov
->size
>> 9;
4408 reqs
[outidx
].qiov
= qiov
;
4410 mcb
->callbacks
[i
].free_qiov
= reqs
[outidx
].qiov
;
4413 reqs
[outidx
].sector
= reqs
[i
].sector
;
4414 reqs
[outidx
].nb_sectors
= reqs
[i
].nb_sectors
;
4415 reqs
[outidx
].qiov
= reqs
[i
].qiov
;
4423 * Submit multiple AIO write requests at once.
4425 * On success, the function returns 0 and all requests in the reqs array have
4426 * been submitted. In error case this function returns -1, and any of the
4427 * requests may or may not be submitted yet. In particular, this means that the
4428 * callback will be called for some of the requests, for others it won't. The
4429 * caller must check the error field of the BlockRequest to wait for the right
4430 * callbacks (if error != 0, no callback will be called).
4432 * The implementation may modify the contents of the reqs array, e.g. to merge
4433 * requests. However, the fields opaque and error are left unmodified as they
4434 * are used to signal failure for a single request to the caller.
4436 int bdrv_aio_multiwrite(BlockDriverState
*bs
, BlockRequest
*reqs
, int num_reqs
)
4441 /* don't submit writes if we don't have a medium */
4442 if (bs
->drv
== NULL
) {
4443 for (i
= 0; i
< num_reqs
; i
++) {
4444 reqs
[i
].error
= -ENOMEDIUM
;
4449 if (num_reqs
== 0) {
4453 // Create MultiwriteCB structure
4454 mcb
= g_malloc0(sizeof(*mcb
) + num_reqs
* sizeof(*mcb
->callbacks
));
4455 mcb
->num_requests
= 0;
4456 mcb
->num_callbacks
= num_reqs
;
4458 for (i
= 0; i
< num_reqs
; i
++) {
4459 mcb
->callbacks
[i
].cb
= reqs
[i
].cb
;
4460 mcb
->callbacks
[i
].opaque
= reqs
[i
].opaque
;
4463 // Check for mergable requests
4464 num_reqs
= multiwrite_merge(bs
, reqs
, num_reqs
, mcb
);
4466 trace_bdrv_aio_multiwrite(mcb
, mcb
->num_callbacks
, num_reqs
);
4468 /* Run the aio requests. */
4469 mcb
->num_requests
= num_reqs
;
4470 for (i
= 0; i
< num_reqs
; i
++) {
4471 bdrv_co_aio_rw_vector(bs
, reqs
[i
].sector
, reqs
[i
].qiov
,
4472 reqs
[i
].nb_sectors
, reqs
[i
].flags
,
4480 void bdrv_aio_cancel(BlockDriverAIOCB
*acb
)
4482 acb
->aiocb_info
->cancel(acb
);
4485 /**************************************************************/
4486 /* async block device emulation */
4488 typedef struct BlockDriverAIOCBSync
{
4489 BlockDriverAIOCB common
;
4492 /* vector translation state */
4496 } BlockDriverAIOCBSync
;
4498 static void bdrv_aio_cancel_em(BlockDriverAIOCB
*blockacb
)
4500 BlockDriverAIOCBSync
*acb
=
4501 container_of(blockacb
, BlockDriverAIOCBSync
, common
);
4502 qemu_bh_delete(acb
->bh
);
4504 qemu_aio_release(acb
);
4507 static const AIOCBInfo bdrv_em_aiocb_info
= {
4508 .aiocb_size
= sizeof(BlockDriverAIOCBSync
),
4509 .cancel
= bdrv_aio_cancel_em
,
4512 static void bdrv_aio_bh_cb(void *opaque
)
4514 BlockDriverAIOCBSync
*acb
= opaque
;
4517 qemu_iovec_from_buf(acb
->qiov
, 0, acb
->bounce
, acb
->qiov
->size
);
4518 qemu_vfree(acb
->bounce
);
4519 acb
->common
.cb(acb
->common
.opaque
, acb
->ret
);
4520 qemu_bh_delete(acb
->bh
);
4522 qemu_aio_release(acb
);
4525 static BlockDriverAIOCB
*bdrv_aio_rw_vector(BlockDriverState
*bs
,
4529 BlockDriverCompletionFunc
*cb
,
4534 BlockDriverAIOCBSync
*acb
;
4536 acb
= qemu_aio_get(&bdrv_em_aiocb_info
, bs
, cb
, opaque
);
4537 acb
->is_write
= is_write
;
4539 acb
->bounce
= qemu_blockalign(bs
, qiov
->size
);
4540 acb
->bh
= qemu_bh_new(bdrv_aio_bh_cb
, acb
);
4543 qemu_iovec_to_buf(acb
->qiov
, 0, acb
->bounce
, qiov
->size
);
4544 acb
->ret
= bs
->drv
->bdrv_write(bs
, sector_num
, acb
->bounce
, nb_sectors
);
4546 acb
->ret
= bs
->drv
->bdrv_read(bs
, sector_num
, acb
->bounce
, nb_sectors
);
4549 qemu_bh_schedule(acb
->bh
);
4551 return &acb
->common
;
4554 static BlockDriverAIOCB
*bdrv_aio_readv_em(BlockDriverState
*bs
,
4555 int64_t sector_num
, QEMUIOVector
*qiov
, int nb_sectors
,
4556 BlockDriverCompletionFunc
*cb
, void *opaque
)
4558 return bdrv_aio_rw_vector(bs
, sector_num
, qiov
, nb_sectors
, cb
, opaque
, 0);
4561 static BlockDriverAIOCB
*bdrv_aio_writev_em(BlockDriverState
*bs
,
4562 int64_t sector_num
, QEMUIOVector
*qiov
, int nb_sectors
,
4563 BlockDriverCompletionFunc
*cb
, void *opaque
)
4565 return bdrv_aio_rw_vector(bs
, sector_num
, qiov
, nb_sectors
, cb
, opaque
, 1);
4569 typedef struct BlockDriverAIOCBCoroutine
{
4570 BlockDriverAIOCB common
;
4575 } BlockDriverAIOCBCoroutine
;
4577 static void bdrv_aio_co_cancel_em(BlockDriverAIOCB
*blockacb
)
4579 BlockDriverAIOCBCoroutine
*acb
=
4580 container_of(blockacb
, BlockDriverAIOCBCoroutine
, common
);
4589 static const AIOCBInfo bdrv_em_co_aiocb_info
= {
4590 .aiocb_size
= sizeof(BlockDriverAIOCBCoroutine
),
4591 .cancel
= bdrv_aio_co_cancel_em
,
4594 static void bdrv_co_em_bh(void *opaque
)
4596 BlockDriverAIOCBCoroutine
*acb
= opaque
;
4598 acb
->common
.cb(acb
->common
.opaque
, acb
->req
.error
);
4604 qemu_bh_delete(acb
->bh
);
4605 qemu_aio_release(acb
);
4608 /* Invoke bdrv_co_do_readv/bdrv_co_do_writev */
4609 static void coroutine_fn
bdrv_co_do_rw(void *opaque
)
4611 BlockDriverAIOCBCoroutine
*acb
= opaque
;
4612 BlockDriverState
*bs
= acb
->common
.bs
;
4614 if (!acb
->is_write
) {
4615 acb
->req
.error
= bdrv_co_do_readv(bs
, acb
->req
.sector
,
4616 acb
->req
.nb_sectors
, acb
->req
.qiov
, acb
->req
.flags
);
4618 acb
->req
.error
= bdrv_co_do_writev(bs
, acb
->req
.sector
,
4619 acb
->req
.nb_sectors
, acb
->req
.qiov
, acb
->req
.flags
);
4622 acb
->bh
= qemu_bh_new(bdrv_co_em_bh
, acb
);
4623 qemu_bh_schedule(acb
->bh
);
4626 static BlockDriverAIOCB
*bdrv_co_aio_rw_vector(BlockDriverState
*bs
,
4630 BdrvRequestFlags flags
,
4631 BlockDriverCompletionFunc
*cb
,
4636 BlockDriverAIOCBCoroutine
*acb
;
4638 acb
= qemu_aio_get(&bdrv_em_co_aiocb_info
, bs
, cb
, opaque
);
4639 acb
->req
.sector
= sector_num
;
4640 acb
->req
.nb_sectors
= nb_sectors
;
4641 acb
->req
.qiov
= qiov
;
4642 acb
->req
.flags
= flags
;
4643 acb
->is_write
= is_write
;
4646 co
= qemu_coroutine_create(bdrv_co_do_rw
);
4647 qemu_coroutine_enter(co
, acb
);
4649 return &acb
->common
;
4652 static void coroutine_fn
bdrv_aio_flush_co_entry(void *opaque
)
4654 BlockDriverAIOCBCoroutine
*acb
= opaque
;
4655 BlockDriverState
*bs
= acb
->common
.bs
;
4657 acb
->req
.error
= bdrv_co_flush(bs
);
4658 acb
->bh
= qemu_bh_new(bdrv_co_em_bh
, acb
);
4659 qemu_bh_schedule(acb
->bh
);
4662 BlockDriverAIOCB
*bdrv_aio_flush(BlockDriverState
*bs
,
4663 BlockDriverCompletionFunc
*cb
, void *opaque
)
4665 trace_bdrv_aio_flush(bs
, opaque
);
4668 BlockDriverAIOCBCoroutine
*acb
;
4670 acb
= qemu_aio_get(&bdrv_em_co_aiocb_info
, bs
, cb
, opaque
);
4673 co
= qemu_coroutine_create(bdrv_aio_flush_co_entry
);
4674 qemu_coroutine_enter(co
, acb
);
4676 return &acb
->common
;
4679 static void coroutine_fn
bdrv_aio_discard_co_entry(void *opaque
)
4681 BlockDriverAIOCBCoroutine
*acb
= opaque
;
4682 BlockDriverState
*bs
= acb
->common
.bs
;
4684 acb
->req
.error
= bdrv_co_discard(bs
, acb
->req
.sector
, acb
->req
.nb_sectors
);
4685 acb
->bh
= qemu_bh_new(bdrv_co_em_bh
, acb
);
4686 qemu_bh_schedule(acb
->bh
);
4689 BlockDriverAIOCB
*bdrv_aio_discard(BlockDriverState
*bs
,
4690 int64_t sector_num
, int nb_sectors
,
4691 BlockDriverCompletionFunc
*cb
, void *opaque
)
4694 BlockDriverAIOCBCoroutine
*acb
;
4696 trace_bdrv_aio_discard(bs
, sector_num
, nb_sectors
, opaque
);
4698 acb
= qemu_aio_get(&bdrv_em_co_aiocb_info
, bs
, cb
, opaque
);
4699 acb
->req
.sector
= sector_num
;
4700 acb
->req
.nb_sectors
= nb_sectors
;
4702 co
= qemu_coroutine_create(bdrv_aio_discard_co_entry
);
4703 qemu_coroutine_enter(co
, acb
);
4705 return &acb
->common
;
4708 void bdrv_init(void)
4710 module_call_init(MODULE_INIT_BLOCK
);
4713 void bdrv_init_with_whitelist(void)
4715 use_bdrv_whitelist
= 1;
4719 void *qemu_aio_get(const AIOCBInfo
*aiocb_info
, BlockDriverState
*bs
,
4720 BlockDriverCompletionFunc
*cb
, void *opaque
)
4722 BlockDriverAIOCB
*acb
;
4724 acb
= g_slice_alloc(aiocb_info
->aiocb_size
);
4725 acb
->aiocb_info
= aiocb_info
;
4728 acb
->opaque
= opaque
;
4732 void qemu_aio_release(void *p
)
4734 BlockDriverAIOCB
*acb
= p
;
4735 g_slice_free1(acb
->aiocb_info
->aiocb_size
, acb
);
4738 /**************************************************************/
4739 /* Coroutine block device emulation */
4741 typedef struct CoroutineIOCompletion
{
4742 Coroutine
*coroutine
;
4744 } CoroutineIOCompletion
;
4746 static void bdrv_co_io_em_complete(void *opaque
, int ret
)
4748 CoroutineIOCompletion
*co
= opaque
;
4751 qemu_coroutine_enter(co
->coroutine
, NULL
);
4754 static int coroutine_fn
bdrv_co_io_em(BlockDriverState
*bs
, int64_t sector_num
,
4755 int nb_sectors
, QEMUIOVector
*iov
,
4758 CoroutineIOCompletion co
= {
4759 .coroutine
= qemu_coroutine_self(),
4761 BlockDriverAIOCB
*acb
;
4764 acb
= bs
->drv
->bdrv_aio_writev(bs
, sector_num
, iov
, nb_sectors
,
4765 bdrv_co_io_em_complete
, &co
);
4767 acb
= bs
->drv
->bdrv_aio_readv(bs
, sector_num
, iov
, nb_sectors
,
4768 bdrv_co_io_em_complete
, &co
);
4771 trace_bdrv_co_io_em(bs
, sector_num
, nb_sectors
, is_write
, acb
);
4775 qemu_coroutine_yield();
4780 static int coroutine_fn
bdrv_co_readv_em(BlockDriverState
*bs
,
4781 int64_t sector_num
, int nb_sectors
,
4784 return bdrv_co_io_em(bs
, sector_num
, nb_sectors
, iov
, false);
4787 static int coroutine_fn
bdrv_co_writev_em(BlockDriverState
*bs
,
4788 int64_t sector_num
, int nb_sectors
,
4791 return bdrv_co_io_em(bs
, sector_num
, nb_sectors
, iov
, true);
4794 static void coroutine_fn
bdrv_flush_co_entry(void *opaque
)
4796 RwCo
*rwco
= opaque
;
4798 rwco
->ret
= bdrv_co_flush(rwco
->bs
);
4801 int coroutine_fn
bdrv_co_flush(BlockDriverState
*bs
)
4805 if (!bs
|| !bdrv_is_inserted(bs
) || bdrv_is_read_only(bs
)) {
4809 /* Write back cached data to the OS even with cache=unsafe */
4810 BLKDBG_EVENT(bs
->file
, BLKDBG_FLUSH_TO_OS
);
4811 if (bs
->drv
->bdrv_co_flush_to_os
) {
4812 ret
= bs
->drv
->bdrv_co_flush_to_os(bs
);
4818 /* But don't actually force it to the disk with cache=unsafe */
4819 if (bs
->open_flags
& BDRV_O_NO_FLUSH
) {
4823 BLKDBG_EVENT(bs
->file
, BLKDBG_FLUSH_TO_DISK
);
4824 if (bs
->drv
->bdrv_co_flush_to_disk
) {
4825 ret
= bs
->drv
->bdrv_co_flush_to_disk(bs
);
4826 } else if (bs
->drv
->bdrv_aio_flush
) {
4827 BlockDriverAIOCB
*acb
;
4828 CoroutineIOCompletion co
= {
4829 .coroutine
= qemu_coroutine_self(),
4832 acb
= bs
->drv
->bdrv_aio_flush(bs
, bdrv_co_io_em_complete
, &co
);
4836 qemu_coroutine_yield();
4841 * Some block drivers always operate in either writethrough or unsafe
4842 * mode and don't support bdrv_flush therefore. Usually qemu doesn't
4843 * know how the server works (because the behaviour is hardcoded or
4844 * depends on server-side configuration), so we can't ensure that
4845 * everything is safe on disk. Returning an error doesn't work because
4846 * that would break guests even if the server operates in writethrough
4849 * Let's hope the user knows what he's doing.
4857 /* Now flush the underlying protocol. It will also have BDRV_O_NO_FLUSH
4858 * in the case of cache=unsafe, so there are no useless flushes.
4861 return bdrv_co_flush(bs
->file
);
4864 void bdrv_invalidate_cache(BlockDriverState
*bs
, Error
**errp
)
4866 Error
*local_err
= NULL
;
4873 if (bs
->drv
->bdrv_invalidate_cache
) {
4874 bs
->drv
->bdrv_invalidate_cache(bs
, &local_err
);
4875 } else if (bs
->file
) {
4876 bdrv_invalidate_cache(bs
->file
, &local_err
);
4879 error_propagate(errp
, local_err
);
4883 ret
= refresh_total_sectors(bs
, bs
->total_sectors
);
4885 error_setg_errno(errp
, -ret
, "Could not refresh total sector count");
4890 void bdrv_invalidate_cache_all(Error
**errp
)
4892 BlockDriverState
*bs
;
4893 Error
*local_err
= NULL
;
4895 QTAILQ_FOREACH(bs
, &bdrv_states
, device_list
) {
4896 bdrv_invalidate_cache(bs
, &local_err
);
4898 error_propagate(errp
, local_err
);
4904 void bdrv_clear_incoming_migration_all(void)
4906 BlockDriverState
*bs
;
4908 QTAILQ_FOREACH(bs
, &bdrv_states
, device_list
) {
4909 bs
->open_flags
= bs
->open_flags
& ~(BDRV_O_INCOMING
);
4913 int bdrv_flush(BlockDriverState
*bs
)
4921 if (qemu_in_coroutine()) {
4922 /* Fast-path if already in coroutine context */
4923 bdrv_flush_co_entry(&rwco
);
4925 co
= qemu_coroutine_create(bdrv_flush_co_entry
);
4926 qemu_coroutine_enter(co
, &rwco
);
4927 while (rwco
.ret
== NOT_DONE
) {
4935 typedef struct DiscardCo
{
4936 BlockDriverState
*bs
;
4941 static void coroutine_fn
bdrv_discard_co_entry(void *opaque
)
4943 DiscardCo
*rwco
= opaque
;
4945 rwco
->ret
= bdrv_co_discard(rwco
->bs
, rwco
->sector_num
, rwco
->nb_sectors
);
4948 /* if no limit is specified in the BlockLimits use a default
4949 * of 32768 512-byte sectors (16 MiB) per request.
4951 #define MAX_DISCARD_DEFAULT 32768
4953 int coroutine_fn
bdrv_co_discard(BlockDriverState
*bs
, int64_t sector_num
,
4960 } else if (bdrv_check_request(bs
, sector_num
, nb_sectors
)) {
4962 } else if (bs
->read_only
) {
4966 bdrv_reset_dirty(bs
, sector_num
, nb_sectors
);
4968 /* Do nothing if disabled. */
4969 if (!(bs
->open_flags
& BDRV_O_UNMAP
)) {
4973 if (!bs
->drv
->bdrv_co_discard
&& !bs
->drv
->bdrv_aio_discard
) {
4977 max_discard
= bs
->bl
.max_discard
? bs
->bl
.max_discard
: MAX_DISCARD_DEFAULT
;
4978 while (nb_sectors
> 0) {
4980 int num
= nb_sectors
;
4983 if (bs
->bl
.discard_alignment
&&
4984 num
>= bs
->bl
.discard_alignment
&&
4985 sector_num
% bs
->bl
.discard_alignment
) {
4986 if (num
> bs
->bl
.discard_alignment
) {
4987 num
= bs
->bl
.discard_alignment
;
4989 num
-= sector_num
% bs
->bl
.discard_alignment
;
4992 /* limit request size */
4993 if (num
> max_discard
) {
4997 if (bs
->drv
->bdrv_co_discard
) {
4998 ret
= bs
->drv
->bdrv_co_discard(bs
, sector_num
, num
);
5000 BlockDriverAIOCB
*acb
;
5001 CoroutineIOCompletion co
= {
5002 .coroutine
= qemu_coroutine_self(),
5005 acb
= bs
->drv
->bdrv_aio_discard(bs
, sector_num
, nb_sectors
,
5006 bdrv_co_io_em_complete
, &co
);
5010 qemu_coroutine_yield();
5014 if (ret
&& ret
!= -ENOTSUP
) {
5024 int bdrv_discard(BlockDriverState
*bs
, int64_t sector_num
, int nb_sectors
)
5029 .sector_num
= sector_num
,
5030 .nb_sectors
= nb_sectors
,
5034 if (qemu_in_coroutine()) {
5035 /* Fast-path if already in coroutine context */
5036 bdrv_discard_co_entry(&rwco
);
5038 co
= qemu_coroutine_create(bdrv_discard_co_entry
);
5039 qemu_coroutine_enter(co
, &rwco
);
5040 while (rwco
.ret
== NOT_DONE
) {
5048 /**************************************************************/
5049 /* removable device support */
5052 * Return TRUE if the media is present
5054 int bdrv_is_inserted(BlockDriverState
*bs
)
5056 BlockDriver
*drv
= bs
->drv
;
5060 if (!drv
->bdrv_is_inserted
)
5062 return drv
->bdrv_is_inserted(bs
);
5066 * Return whether the media changed since the last call to this
5067 * function, or -ENOTSUP if we don't know. Most drivers don't know.
5069 int bdrv_media_changed(BlockDriverState
*bs
)
5071 BlockDriver
*drv
= bs
->drv
;
5073 if (drv
&& drv
->bdrv_media_changed
) {
5074 return drv
->bdrv_media_changed(bs
);
5080 * If eject_flag is TRUE, eject the media. Otherwise, close the tray
5082 void bdrv_eject(BlockDriverState
*bs
, bool eject_flag
)
5084 BlockDriver
*drv
= bs
->drv
;
5086 if (drv
&& drv
->bdrv_eject
) {
5087 drv
->bdrv_eject(bs
, eject_flag
);
5090 if (bs
->device_name
[0] != '\0') {
5091 bdrv_emit_qmp_eject_event(bs
, eject_flag
);
5096 * Lock or unlock the media (if it is locked, the user won't be able
5097 * to eject it manually).
5099 void bdrv_lock_medium(BlockDriverState
*bs
, bool locked
)
5101 BlockDriver
*drv
= bs
->drv
;
5103 trace_bdrv_lock_medium(bs
, locked
);
5105 if (drv
&& drv
->bdrv_lock_medium
) {
5106 drv
->bdrv_lock_medium(bs
, locked
);
5110 /* needed for generic scsi interface */
5112 int bdrv_ioctl(BlockDriverState
*bs
, unsigned long int req
, void *buf
)
5114 BlockDriver
*drv
= bs
->drv
;
5116 if (drv
&& drv
->bdrv_ioctl
)
5117 return drv
->bdrv_ioctl(bs
, req
, buf
);
5121 BlockDriverAIOCB
*bdrv_aio_ioctl(BlockDriverState
*bs
,
5122 unsigned long int req
, void *buf
,
5123 BlockDriverCompletionFunc
*cb
, void *opaque
)
5125 BlockDriver
*drv
= bs
->drv
;
5127 if (drv
&& drv
->bdrv_aio_ioctl
)
5128 return drv
->bdrv_aio_ioctl(bs
, req
, buf
, cb
, opaque
);
5132 void bdrv_set_guest_block_size(BlockDriverState
*bs
, int align
)
5134 bs
->guest_block_size
= align
;
5137 void *qemu_blockalign(BlockDriverState
*bs
, size_t size
)
5139 return qemu_memalign(bdrv_opt_mem_align(bs
), size
);
5143 * Check if all memory in this vector is sector aligned.
5145 bool bdrv_qiov_is_aligned(BlockDriverState
*bs
, QEMUIOVector
*qiov
)
5148 size_t alignment
= bdrv_opt_mem_align(bs
);
5150 for (i
= 0; i
< qiov
->niov
; i
++) {
5151 if ((uintptr_t) qiov
->iov
[i
].iov_base
% alignment
) {
5154 if (qiov
->iov
[i
].iov_len
% alignment
) {
5162 BdrvDirtyBitmap
*bdrv_create_dirty_bitmap(BlockDriverState
*bs
, int granularity
,
5165 int64_t bitmap_size
;
5166 BdrvDirtyBitmap
*bitmap
;
5168 assert((granularity
& (granularity
- 1)) == 0);
5170 granularity
>>= BDRV_SECTOR_BITS
;
5171 assert(granularity
);
5172 bitmap_size
= bdrv_getlength(bs
);
5173 if (bitmap_size
< 0) {
5174 error_setg_errno(errp
, -bitmap_size
, "could not get length of device");
5175 errno
= -bitmap_size
;
5178 bitmap_size
>>= BDRV_SECTOR_BITS
;
5179 bitmap
= g_malloc0(sizeof(BdrvDirtyBitmap
));
5180 bitmap
->bitmap
= hbitmap_alloc(bitmap_size
, ffs(granularity
) - 1);
5181 QLIST_INSERT_HEAD(&bs
->dirty_bitmaps
, bitmap
, list
);
5185 void bdrv_release_dirty_bitmap(BlockDriverState
*bs
, BdrvDirtyBitmap
*bitmap
)
5187 BdrvDirtyBitmap
*bm
, *next
;
5188 QLIST_FOREACH_SAFE(bm
, &bs
->dirty_bitmaps
, list
, next
) {
5190 QLIST_REMOVE(bitmap
, list
);
5191 hbitmap_free(bitmap
->bitmap
);
5198 BlockDirtyInfoList
*bdrv_query_dirty_bitmaps(BlockDriverState
*bs
)
5200 BdrvDirtyBitmap
*bm
;
5201 BlockDirtyInfoList
*list
= NULL
;
5202 BlockDirtyInfoList
**plist
= &list
;
5204 QLIST_FOREACH(bm
, &bs
->dirty_bitmaps
, list
) {
5205 BlockDirtyInfo
*info
= g_malloc0(sizeof(BlockDirtyInfo
));
5206 BlockDirtyInfoList
*entry
= g_malloc0(sizeof(BlockDirtyInfoList
));
5207 info
->count
= bdrv_get_dirty_count(bs
, bm
);
5209 ((int64_t) BDRV_SECTOR_SIZE
<< hbitmap_granularity(bm
->bitmap
));
5210 entry
->value
= info
;
5212 plist
= &entry
->next
;
5218 int bdrv_get_dirty(BlockDriverState
*bs
, BdrvDirtyBitmap
*bitmap
, int64_t sector
)
5221 return hbitmap_get(bitmap
->bitmap
, sector
);
5227 void bdrv_dirty_iter_init(BlockDriverState
*bs
,
5228 BdrvDirtyBitmap
*bitmap
, HBitmapIter
*hbi
)
5230 hbitmap_iter_init(hbi
, bitmap
->bitmap
, 0);
5233 void bdrv_set_dirty(BlockDriverState
*bs
, int64_t cur_sector
,
5236 BdrvDirtyBitmap
*bitmap
;
5237 QLIST_FOREACH(bitmap
, &bs
->dirty_bitmaps
, list
) {
5238 hbitmap_set(bitmap
->bitmap
, cur_sector
, nr_sectors
);
5242 void bdrv_reset_dirty(BlockDriverState
*bs
, int64_t cur_sector
, int nr_sectors
)
5244 BdrvDirtyBitmap
*bitmap
;
5245 QLIST_FOREACH(bitmap
, &bs
->dirty_bitmaps
, list
) {
5246 hbitmap_reset(bitmap
->bitmap
, cur_sector
, nr_sectors
);
5250 int64_t bdrv_get_dirty_count(BlockDriverState
*bs
, BdrvDirtyBitmap
*bitmap
)
5252 return hbitmap_count(bitmap
->bitmap
);
5255 /* Get a reference to bs */
5256 void bdrv_ref(BlockDriverState
*bs
)
5261 /* Release a previously grabbed reference to bs.
5262 * If after releasing, reference count is zero, the BlockDriverState is
5264 void bdrv_unref(BlockDriverState
*bs
)
5266 assert(bs
->refcnt
> 0);
5267 if (--bs
->refcnt
== 0) {
5272 void bdrv_set_in_use(BlockDriverState
*bs
, int in_use
)
5274 assert(bs
->in_use
!= in_use
);
5275 bs
->in_use
= in_use
;
5278 int bdrv_in_use(BlockDriverState
*bs
)
5283 void bdrv_iostatus_enable(BlockDriverState
*bs
)
5285 bs
->iostatus_enabled
= true;
5286 bs
->iostatus
= BLOCK_DEVICE_IO_STATUS_OK
;
5289 /* The I/O status is only enabled if the drive explicitly
5290 * enables it _and_ the VM is configured to stop on errors */
5291 bool bdrv_iostatus_is_enabled(const BlockDriverState
*bs
)
5293 return (bs
->iostatus_enabled
&&
5294 (bs
->on_write_error
== BLOCKDEV_ON_ERROR_ENOSPC
||
5295 bs
->on_write_error
== BLOCKDEV_ON_ERROR_STOP
||
5296 bs
->on_read_error
== BLOCKDEV_ON_ERROR_STOP
));
5299 void bdrv_iostatus_disable(BlockDriverState
*bs
)
5301 bs
->iostatus_enabled
= false;
5304 void bdrv_iostatus_reset(BlockDriverState
*bs
)
5306 if (bdrv_iostatus_is_enabled(bs
)) {
5307 bs
->iostatus
= BLOCK_DEVICE_IO_STATUS_OK
;
5309 block_job_iostatus_reset(bs
->job
);
5314 void bdrv_iostatus_set_err(BlockDriverState
*bs
, int error
)
5316 assert(bdrv_iostatus_is_enabled(bs
));
5317 if (bs
->iostatus
== BLOCK_DEVICE_IO_STATUS_OK
) {
5318 bs
->iostatus
= error
== ENOSPC
? BLOCK_DEVICE_IO_STATUS_NOSPACE
:
5319 BLOCK_DEVICE_IO_STATUS_FAILED
;
5324 bdrv_acct_start(BlockDriverState
*bs
, BlockAcctCookie
*cookie
, int64_t bytes
,
5325 enum BlockAcctType type
)
5327 assert(type
< BDRV_MAX_IOTYPE
);
5329 cookie
->bytes
= bytes
;
5330 cookie
->start_time_ns
= get_clock();
5331 cookie
->type
= type
;
5335 bdrv_acct_done(BlockDriverState
*bs
, BlockAcctCookie
*cookie
)
5337 assert(cookie
->type
< BDRV_MAX_IOTYPE
);
5339 bs
->nr_bytes
[cookie
->type
] += cookie
->bytes
;
5340 bs
->nr_ops
[cookie
->type
]++;
5341 bs
->total_time_ns
[cookie
->type
] += get_clock() - cookie
->start_time_ns
;
5344 void bdrv_img_create(const char *filename
, const char *fmt
,
5345 const char *base_filename
, const char *base_fmt
,
5346 char *options
, uint64_t img_size
, int flags
,
5347 Error
**errp
, bool quiet
)
5349 QEMUOptionParameter
*param
= NULL
, *create_options
= NULL
;
5350 QEMUOptionParameter
*backing_fmt
, *backing_file
, *size
;
5351 BlockDriver
*drv
, *proto_drv
;
5352 BlockDriver
*backing_drv
= NULL
;
5353 Error
*local_err
= NULL
;
5356 /* Find driver and parse its options */
5357 drv
= bdrv_find_format(fmt
);
5359 error_setg(errp
, "Unknown file format '%s'", fmt
);
5363 proto_drv
= bdrv_find_protocol(filename
, true);
5365 error_setg(errp
, "Unknown protocol '%s'", filename
);
5369 create_options
= append_option_parameters(create_options
,
5370 drv
->create_options
);
5371 create_options
= append_option_parameters(create_options
,
5372 proto_drv
->create_options
);
5374 /* Create parameter list with default values */
5375 param
= parse_option_parameters("", create_options
, param
);
5377 set_option_parameter_int(param
, BLOCK_OPT_SIZE
, img_size
);
5379 /* Parse -o options */
5381 param
= parse_option_parameters(options
, create_options
, param
);
5382 if (param
== NULL
) {
5383 error_setg(errp
, "Invalid options for file format '%s'.", fmt
);
5388 if (base_filename
) {
5389 if (set_option_parameter(param
, BLOCK_OPT_BACKING_FILE
,
5391 error_setg(errp
, "Backing file not supported for file format '%s'",
5398 if (set_option_parameter(param
, BLOCK_OPT_BACKING_FMT
, base_fmt
)) {
5399 error_setg(errp
, "Backing file format not supported for file "
5400 "format '%s'", fmt
);
5405 backing_file
= get_option_parameter(param
, BLOCK_OPT_BACKING_FILE
);
5406 if (backing_file
&& backing_file
->value
.s
) {
5407 if (!strcmp(filename
, backing_file
->value
.s
)) {
5408 error_setg(errp
, "Error: Trying to create an image with the "
5409 "same filename as the backing file");
5414 backing_fmt
= get_option_parameter(param
, BLOCK_OPT_BACKING_FMT
);
5415 if (backing_fmt
&& backing_fmt
->value
.s
) {
5416 backing_drv
= bdrv_find_format(backing_fmt
->value
.s
);
5418 error_setg(errp
, "Unknown backing file format '%s'",
5419 backing_fmt
->value
.s
);
5424 // The size for the image must always be specified, with one exception:
5425 // If we are using a backing file, we can obtain the size from there
5426 size
= get_option_parameter(param
, BLOCK_OPT_SIZE
);
5427 if (size
&& size
->value
.n
== -1) {
5428 if (backing_file
&& backing_file
->value
.s
) {
5429 BlockDriverState
*bs
;
5434 /* backing files always opened read-only */
5436 flags
& ~(BDRV_O_RDWR
| BDRV_O_SNAPSHOT
| BDRV_O_NO_BACKING
);
5439 ret
= bdrv_open(&bs
, backing_file
->value
.s
, NULL
, NULL
, back_flags
,
5440 backing_drv
, &local_err
);
5442 error_setg_errno(errp
, -ret
, "Could not open '%s': %s",
5443 backing_file
->value
.s
,
5444 error_get_pretty(local_err
));
5445 error_free(local_err
);
5449 bdrv_get_geometry(bs
, &size
);
5452 snprintf(buf
, sizeof(buf
), "%" PRId64
, size
);
5453 set_option_parameter(param
, BLOCK_OPT_SIZE
, buf
);
5457 error_setg(errp
, "Image creation needs a size parameter");
5463 printf("Formatting '%s', fmt=%s ", filename
, fmt
);
5464 print_option_parameters(param
);
5467 ret
= bdrv_create(drv
, filename
, param
, &local_err
);
5468 if (ret
== -EFBIG
) {
5469 /* This is generally a better message than whatever the driver would
5470 * deliver (especially because of the cluster_size_hint), since that
5471 * is most probably not much different from "image too large". */
5472 const char *cluster_size_hint
= "";
5473 if (get_option_parameter(create_options
, BLOCK_OPT_CLUSTER_SIZE
)) {
5474 cluster_size_hint
= " (try using a larger cluster size)";
5476 error_setg(errp
, "The image size is too large for file format '%s'"
5477 "%s", fmt
, cluster_size_hint
);
5478 error_free(local_err
);
5483 free_option_parameters(create_options
);
5484 free_option_parameters(param
);
5487 error_propagate(errp
, local_err
);
5491 AioContext
*bdrv_get_aio_context(BlockDriverState
*bs
)
5493 /* Currently BlockDriverState always uses the main loop AioContext */
5494 return qemu_get_aio_context();
5497 void bdrv_add_before_write_notifier(BlockDriverState
*bs
,
5498 NotifierWithReturn
*notifier
)
5500 notifier_with_return_list_add(&bs
->before_write_notifiers
, notifier
);
5503 int bdrv_amend_options(BlockDriverState
*bs
, QEMUOptionParameter
*options
)
5505 if (bs
->drv
->bdrv_amend_options
== NULL
) {
5508 return bs
->drv
->bdrv_amend_options(bs
, options
);
5511 /* This function will be called by the bdrv_recurse_is_first_non_filter method
5512 * of block filter and by bdrv_is_first_non_filter.
5513 * It is used to test if the given bs is the candidate or recurse more in the
5516 bool bdrv_recurse_is_first_non_filter(BlockDriverState
*bs
,
5517 BlockDriverState
*candidate
)
5519 /* return false if basic checks fails */
5520 if (!bs
|| !bs
->drv
) {
5524 /* the code reached a non block filter driver -> check if the bs is
5525 * the same as the candidate. It's the recursion termination condition.
5527 if (!bs
->drv
->is_filter
) {
5528 return bs
== candidate
;
5530 /* Down this path the driver is a block filter driver */
5532 /* If the block filter recursion method is defined use it to recurse down
5535 if (bs
->drv
->bdrv_recurse_is_first_non_filter
) {
5536 return bs
->drv
->bdrv_recurse_is_first_non_filter(bs
, candidate
);
5539 /* the driver is a block filter but don't allow to recurse -> return false
5544 /* This function checks if the candidate is the first non filter bs down it's
5545 * bs chain. Since we don't have pointers to parents it explore all bs chains
5546 * from the top. Some filters can choose not to pass down the recursion.
5548 bool bdrv_is_first_non_filter(BlockDriverState
*candidate
)
5550 BlockDriverState
*bs
;
5552 /* walk down the bs forest recursively */
5553 QTAILQ_FOREACH(bs
, &bdrv_states
, device_list
) {
5556 /* try to recurse in this top level bs */
5557 perm
= bdrv_recurse_is_first_non_filter(bs
, candidate
);
5559 /* candidate is the first non filter */