hw/ssi-sd.c

   1 /*
   2  * SSI to SD card adapter.
   3  *
   4  * Copyright (c) 2007-2009 CodeSourcery.
   5  * Written by Paul Brook
   6  *
   7  * This code is licenced under the GNU GPL v2.
   8  */
   9
  10 #include "ssi.h"
  11 #include "sd.h"
  12
  13 //#define DEBUG_SSI_SD 1
  14
  15 #ifdef DEBUG_SSI_SD
  16 #define DPRINTF(fmt, ...) \
  17 do { printf("ssi_sd: " fmt , ## __VA_ARGS__); } while (0)
  18 #define BADF(fmt, ...) \
  19 do { fprintf(stderr, "ssi_sd: error: " fmt , ## __VA_ARGS__); exit(1);} while (0)
  20 #else
  21 #define DPRINTF(fmt, ...) do {} while(0)
  22 #define BADF(fmt, ...) \
  23 do { fprintf(stderr, "ssi_sd: error: " fmt , ## __VA_ARGS__);} while (0)
  24 #endif
  25
  26 typedef enum {
  27     SSI_SD_CMD,
  28     SSI_SD_CMDARG,
  29     SSI_SD_RESPONSE,
  30     SSI_SD_DATA_START,
  31     SSI_SD_DATA_READ,
  32 } ssi_sd_mode;
  33
  34 typedef struct {
  35     SSISlave ssidev;
  36     ssi_sd_mode mode;
  37     int cmd;
  38     uint8_t cmdarg[4];
  39     uint8_t response[5];
  40     int arglen;
  41     int response_pos;
  42     int stopping;
  43     SDState *sd;
  44 } ssi_sd_state;
  45
  46 /* State word bits.  */
  47 #define SSI_SDR_LOCKED          0x0001
  48 #define SSI_SDR_WP_ERASE        0x0002
  49 #define SSI_SDR_ERROR           0x0004
  50 #define SSI_SDR_CC_ERROR        0x0008
  51 #define SSI_SDR_ECC_FAILED      0x0010
  52 #define SSI_SDR_WP_VIOLATION    0x0020
  53 #define SSI_SDR_ERASE_PARAM     0x0040
  54 #define SSI_SDR_OUT_OF_RANGE    0x0080
  55 #define SSI_SDR_IDLE            0x0100
  56 #define SSI_SDR_ERASE_RESET     0x0200
  57 #define SSI_SDR_ILLEGAL_COMMAND 0x0400
  58 #define SSI_SDR_COM_CRC_ERROR   0x0800
  59 #define SSI_SDR_ERASE_SEQ_ERROR 0x1000
  60 #define SSI_SDR_ADDRESS_ERROR   0x2000
  61 #define SSI_SDR_PARAMETER_ERROR 0x4000
  62
  63 static uint32_t ssi_sd_transfer(SSISlave *dev, uint32_t val)
  64 {
  65     ssi_sd_state *s = FROM_SSI_SLAVE(ssi_sd_state, dev);
  66
  67     /* Special case: allow CMD12 (STOP TRANSMISSION) while reading data.  */
  68     if (s->mode == SSI_SD_DATA_READ && val == 0x4d) {
  69         s->mode = SSI_SD_CMD;
  70         /* There must be at least one byte delay before the card responds.  */
  71         s->stopping = 1;
  72     }
  73
  74     switch (s->mode) {
  75     case SSI_SD_CMD:
  76         if (val == 0xff) {
  77             DPRINTF("NULL command\n");
  78             return 0xff;
  79         }
  80         s->cmd = val & 0x3f;
  81         s->mode = SSI_SD_CMDARG;
  82         s->arglen = 0;
  83         return 0xff;
  84     case SSI_SD_CMDARG:
  85         if (s->arglen == 4) {
  86             SDRequest request;
  87             uint8_t longresp[16];
  88             /* FIXME: Check CRC.  */
  89             request.cmd = s->cmd;
  90             request.arg = (s->cmdarg[0] << 24) | (s->cmdarg[1] << 16)
  91                            | (s->cmdarg[2] << 8) | s->cmdarg[3];
  92             DPRINTF("CMD%d arg 0x%08x\n", s->cmd, request.arg);
  93             s->arglen = sd_do_command(s->sd, &request, longresp);
  94             if (s->arglen <= 0) {
  95                 s->arglen = 1;
  96                 s->response[0] = 4;
  97                 DPRINTF("SD command failed\n");
  98             } else if (s->cmd == 58) {
  99                 /* CMD58 returns R3 response (OCR)  */
 100                 DPRINTF("Returned OCR\n");
 101                 s->arglen = 5;
 102                 s->response[0] = 1;
 103                 memcpy(&s->response[1], longresp, 4);
 104             } else if (s->arglen != 4) {
 105                 BADF("Unexpected response to cmd %d\n", s->cmd);
 106                 /* Illegal command is about as near as we can get.  */
 107                 s->arglen = 1;
 108                 s->response[0] = 4;
 109             } else {
 110                 /* All other commands return status.  */
 111                 uint32_t cardstatus;
 112                 uint16_t status;
 113                 /* CMD13 returns a 2-byte statuse work. Other commands
 114                    only return the first byte.  */
 115                 s->arglen = (s->cmd == 13) ? 2 : 1;
 116                 cardstatus = (longresp[0] << 24) | (longresp[1] << 16)
 117                              | (longresp[2] << 8) | longresp[3];
 118                 status = 0;
 119                 if (((cardstatus >> 9) & 0xf) < 4)
 120                     status |= SSI_SDR_IDLE;
 121                 if (cardstatus & ERASE_RESET)
 122                     status |= SSI_SDR_ERASE_RESET;
 123                 if (cardstatus & ILLEGAL_COMMAND)
 124                     status |= SSI_SDR_ILLEGAL_COMMAND;
 125                 if (cardstatus & COM_CRC_ERROR)
 126                     status |= SSI_SDR_COM_CRC_ERROR;
 127                 if (cardstatus & ERASE_SEQ_ERROR)
 128                     status |= SSI_SDR_ERASE_SEQ_ERROR;
 129                 if (cardstatus & ADDRESS_ERROR)
 130                     status |= SSI_SDR_ADDRESS_ERROR;
 131                 if (cardstatus & CARD_IS_LOCKED)
 132                     status |= SSI_SDR_LOCKED;
 133                 if (cardstatus & (LOCK_UNLOCK_FAILED | WP_ERASE_SKIP))
 134                     status |= SSI_SDR_WP_ERASE;
 135                 if (cardstatus & SD_ERROR)
 136                     status |= SSI_SDR_ERROR;
 137                 if (cardstatus & CC_ERROR)
 138                     status |= SSI_SDR_CC_ERROR;
 139                 if (cardstatus & CARD_ECC_FAILED)
 140                     status |= SSI_SDR_ECC_FAILED;
 141                 if (cardstatus & WP_VIOLATION)
 142                     status |= SSI_SDR_WP_VIOLATION;
 143                 if (cardstatus & ERASE_PARAM)
 144                     status |= SSI_SDR_ERASE_PARAM;
 145                 if (cardstatus & (OUT_OF_RANGE | CID_CSD_OVERWRITE))
 146                     status |= SSI_SDR_OUT_OF_RANGE;
 147                 /* ??? Don't know what Parameter Error really means, so
 148                    assume it's set if the second byte is nonzero.  */
 149                 if (status & 0xff)
 150                     status |= SSI_SDR_PARAMETER_ERROR;
 151                 s->response[0] = status >> 8;
 152                 s->response[1] = status;
 153                 DPRINTF("Card status 0x%02x\n", status);
 154             }
 155             s->mode = SSI_SD_RESPONSE;
 156             s->response_pos = 0;
 157         } else {
 158             s->cmdarg[s->arglen++] = val;
 159         }
 160         return 0xff;
 161     case SSI_SD_RESPONSE:
 162         if (s->stopping) {
 163             s->stopping = 0;
 164             return 0xff;
 165         }
 166         if (s->response_pos < s->arglen) {
 167             DPRINTF("Response 0x%02x\n", s->response[s->response_pos]);
 168             return s->response[s->response_pos++];
 169         }
 170         if (sd_data_ready(s->sd)) {
 171             DPRINTF("Data read\n");
 172             s->mode = SSI_SD_DATA_START;
 173         } else {
 174             DPRINTF("End of command\n");
 175             s->mode = SSI_SD_CMD;
 176         }
 177         return 0xff;
 178     case SSI_SD_DATA_START:
 179         DPRINTF("Start read block\n");
 180         s->mode = SSI_SD_DATA_READ;
 181         return 0xfe;
 182     case SSI_SD_DATA_READ:
 183         val = sd_read_data(s->sd);
 184         if (!sd_data_ready(s->sd)) {
 185             DPRINTF("Data read end\n");
 186             s->mode = SSI_SD_CMD;
 187         }
 188         return val;
 189     }
 190     /* Should never happen.  */
 191     return 0xff;
 192 }
 193
 194 static void ssi_sd_save(QEMUFile *f, void *opaque)
 195 {
 196     ssi_sd_state *s = (ssi_sd_state *)opaque;
 197     int i;
 198
 199     qemu_put_be32(f, s->mode);
 200     qemu_put_be32(f, s->cmd);
 201     for (i = 0; i < 4; i++)
 202         qemu_put_be32(f, s->cmdarg[i]);
 203     for (i = 0; i < 5; i++)
 204         qemu_put_be32(f, s->response[i]);
 205     qemu_put_be32(f, s->arglen);
 206     qemu_put_be32(f, s->response_pos);
 207     qemu_put_be32(f, s->stopping);
 208 }
 209
 210 static int ssi_sd_load(QEMUFile *f, void *opaque, int version_id)
 211 {
 212     ssi_sd_state *s = (ssi_sd_state *)opaque;
 213     int i;
 214
 215     if (version_id != 1)
 216         return -EINVAL;
 217
 218     s->mode = qemu_get_be32(f);
 219     s->cmd = qemu_get_be32(f);
 220     for (i = 0; i < 4; i++)
 221         s->cmdarg[i] = qemu_get_be32(f);
 222     for (i = 0; i < 5; i++)
 223         s->response[i] = qemu_get_be32(f);
 224     s->arglen = qemu_get_be32(f);
 225     s->response_pos = qemu_get_be32(f);
 226     s->stopping = qemu_get_be32(f);
 227
 228     return 0;
 229 }
 230
 231 static int ssi_sd_init(SSISlave *dev)
 232 {
 233     ssi_sd_state *s = FROM_SSI_SLAVE(ssi_sd_state, dev);
 234     BlockDriverState *bs;
 235
 236     s->mode = SSI_SD_CMD;
 237     bs = qdev_init_bdrv(&dev->qdev, IF_SD);
 238     s->sd = sd_init(bs, 1);
 239     register_savevm(&dev->qdev, "ssi_sd", -1, 1, ssi_sd_save, ssi_sd_load, s);
 240     return 0;
 241 }
 242
 243 static SSISlaveInfo ssi_sd_info = {
 244     .qdev.name = "ssi-sd",
 245     .qdev.size = sizeof(ssi_sd_state),
 246     .init = ssi_sd_init,
 247     .transfer = ssi_sd_transfer
 248 };
 249
 250 static void ssi_sd_register_devices(void)
 251 {
 252     ssi_register_slave(&ssi_sd_info);
 253 }
 254
 255 device_init(ssi_sd_register_devices)