exec: eliminate qemu_put_ram_ptr
[qemu.git] / block.c
blob3f874899377c785c45171bde8feac19b1e27c6db
1 /*
2 * QEMU System Emulator block driver
4 * Copyright (c) 2003 Fabrice Bellard
6 * Permission is hereby granted, free of charge, to any person obtaining a copy
7 * of this software and associated documentation files (the "Software"), to deal
8 * in the Software without restriction, including without limitation the rights
9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10 * copies of the Software, and to permit persons to whom the Software is
11 * furnished to do so, subject to the following conditions:
13 * The above copyright notice and this permission notice shall be included in
14 * all copies or substantial portions of the Software.
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
22 * THE SOFTWARE.
24 #include "config-host.h"
25 #include "qemu-common.h"
26 #include "trace.h"
27 #include "monitor/monitor.h"
28 #include "block/block_int.h"
29 #include "block/blockjob.h"
30 #include "qemu/module.h"
31 #include "qapi/qmp/qjson.h"
32 #include "sysemu/sysemu.h"
33 #include "qemu/notify.h"
34 #include "block/coroutine.h"
35 #include "qmp-commands.h"
36 #include "qemu/timer.h"
38 #ifdef CONFIG_BSD
39 #include <sys/types.h>
40 #include <sys/stat.h>
41 #include <sys/ioctl.h>
42 #include <sys/queue.h>
43 #ifndef __DragonFly__
44 #include <sys/disk.h>
45 #endif
46 #endif
48 #ifdef _WIN32
49 #include <windows.h>
50 #endif
52 #define NOT_DONE 0x7fffffff /* used while emulated sync operation in progress */
54 typedef enum {
55 BDRV_REQ_COPY_ON_READ = 0x1,
56 BDRV_REQ_ZERO_WRITE = 0x2,
57 } BdrvRequestFlags;
59 static void bdrv_dev_change_media_cb(BlockDriverState *bs, bool load);
60 static BlockDriverAIOCB *bdrv_aio_readv_em(BlockDriverState *bs,
61 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
62 BlockDriverCompletionFunc *cb, void *opaque);
63 static BlockDriverAIOCB *bdrv_aio_writev_em(BlockDriverState *bs,
64 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
65 BlockDriverCompletionFunc *cb, void *opaque);
66 static int coroutine_fn bdrv_co_readv_em(BlockDriverState *bs,
67 int64_t sector_num, int nb_sectors,
68 QEMUIOVector *iov);
69 static int coroutine_fn bdrv_co_writev_em(BlockDriverState *bs,
70 int64_t sector_num, int nb_sectors,
71 QEMUIOVector *iov);
72 static int coroutine_fn bdrv_co_do_readv(BlockDriverState *bs,
73 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov,
74 BdrvRequestFlags flags);
75 static int coroutine_fn bdrv_co_do_writev(BlockDriverState *bs,
76 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov,
77 BdrvRequestFlags flags);
78 static BlockDriverAIOCB *bdrv_co_aio_rw_vector(BlockDriverState *bs,
79 int64_t sector_num,
80 QEMUIOVector *qiov,
81 int nb_sectors,
82 BlockDriverCompletionFunc *cb,
83 void *opaque,
84 bool is_write);
85 static void coroutine_fn bdrv_co_do_rw(void *opaque);
86 static int coroutine_fn bdrv_co_do_write_zeroes(BlockDriverState *bs,
87 int64_t sector_num, int nb_sectors);
89 static bool bdrv_exceed_bps_limits(BlockDriverState *bs, int nb_sectors,
90 bool is_write, double elapsed_time, uint64_t *wait);
91 static bool bdrv_exceed_iops_limits(BlockDriverState *bs, bool is_write,
92 double elapsed_time, uint64_t *wait);
93 static bool bdrv_exceed_io_limits(BlockDriverState *bs, int nb_sectors,
94 bool is_write, int64_t *wait);
96 static QTAILQ_HEAD(, BlockDriverState) bdrv_states =
97 QTAILQ_HEAD_INITIALIZER(bdrv_states);
99 static QLIST_HEAD(, BlockDriver) bdrv_drivers =
100 QLIST_HEAD_INITIALIZER(bdrv_drivers);
102 /* The device to use for VM snapshots */
103 static BlockDriverState *bs_snapshots;
105 /* If non-zero, use only whitelisted block drivers */
106 static int use_bdrv_whitelist;
108 #ifdef _WIN32
109 static int is_windows_drive_prefix(const char *filename)
111 return (((filename[0] >= 'a' && filename[0] <= 'z') ||
112 (filename[0] >= 'A' && filename[0] <= 'Z')) &&
113 filename[1] == ':');
116 int is_windows_drive(const char *filename)
118 if (is_windows_drive_prefix(filename) &&
119 filename[2] == '\0')
120 return 1;
121 if (strstart(filename, "\\\\.\\", NULL) ||
122 strstart(filename, "//./", NULL))
123 return 1;
124 return 0;
126 #endif
128 /* throttling disk I/O limits */
129 void bdrv_io_limits_disable(BlockDriverState *bs)
131 bs->io_limits_enabled = false;
133 while (qemu_co_queue_next(&bs->throttled_reqs));
135 if (bs->block_timer) {
136 qemu_del_timer(bs->block_timer);
137 qemu_free_timer(bs->block_timer);
138 bs->block_timer = NULL;
141 bs->slice_start = 0;
142 bs->slice_end = 0;
145 static void bdrv_block_timer(void *opaque)
147 BlockDriverState *bs = opaque;
149 qemu_co_queue_next(&bs->throttled_reqs);
152 void bdrv_io_limits_enable(BlockDriverState *bs)
154 qemu_co_queue_init(&bs->throttled_reqs);
155 bs->block_timer = qemu_new_timer_ns(vm_clock, bdrv_block_timer, bs);
156 bs->io_limits_enabled = true;
159 bool bdrv_io_limits_enabled(BlockDriverState *bs)
161 BlockIOLimit *io_limits = &bs->io_limits;
162 return io_limits->bps[BLOCK_IO_LIMIT_READ]
163 || io_limits->bps[BLOCK_IO_LIMIT_WRITE]
164 || io_limits->bps[BLOCK_IO_LIMIT_TOTAL]
165 || io_limits->iops[BLOCK_IO_LIMIT_READ]
166 || io_limits->iops[BLOCK_IO_LIMIT_WRITE]
167 || io_limits->iops[BLOCK_IO_LIMIT_TOTAL];
170 static void bdrv_io_limits_intercept(BlockDriverState *bs,
171 bool is_write, int nb_sectors)
173 int64_t wait_time = -1;
175 if (!qemu_co_queue_empty(&bs->throttled_reqs)) {
176 qemu_co_queue_wait(&bs->throttled_reqs);
179 /* In fact, we hope to keep each request's timing, in FIFO mode. The next
180 * throttled requests will not be dequeued until the current request is
181 * allowed to be serviced. So if the current request still exceeds the
182 * limits, it will be inserted to the head. All requests followed it will
183 * be still in throttled_reqs queue.
186 while (bdrv_exceed_io_limits(bs, nb_sectors, is_write, &wait_time)) {
187 qemu_mod_timer(bs->block_timer,
188 wait_time + qemu_get_clock_ns(vm_clock));
189 qemu_co_queue_wait_insert_head(&bs->throttled_reqs);
192 qemu_co_queue_next(&bs->throttled_reqs);
195 /* check if the path starts with "<protocol>:" */
196 static int path_has_protocol(const char *path)
198 const char *p;
200 #ifdef _WIN32
201 if (is_windows_drive(path) ||
202 is_windows_drive_prefix(path)) {
203 return 0;
205 p = path + strcspn(path, ":/\\");
206 #else
207 p = path + strcspn(path, ":/");
208 #endif
210 return *p == ':';
213 int path_is_absolute(const char *path)
215 #ifdef _WIN32
216 /* specific case for names like: "\\.\d:" */
217 if (is_windows_drive(path) || is_windows_drive_prefix(path)) {
218 return 1;
220 return (*path == '/' || *path == '\\');
221 #else
222 return (*path == '/');
223 #endif
226 /* if filename is absolute, just copy it to dest. Otherwise, build a
227 path to it by considering it is relative to base_path. URL are
228 supported. */
229 void path_combine(char *dest, int dest_size,
230 const char *base_path,
231 const char *filename)
233 const char *p, *p1;
234 int len;
236 if (dest_size <= 0)
237 return;
238 if (path_is_absolute(filename)) {
239 pstrcpy(dest, dest_size, filename);
240 } else {
241 p = strchr(base_path, ':');
242 if (p)
243 p++;
244 else
245 p = base_path;
246 p1 = strrchr(base_path, '/');
247 #ifdef _WIN32
249 const char *p2;
250 p2 = strrchr(base_path, '\\');
251 if (!p1 || p2 > p1)
252 p1 = p2;
254 #endif
255 if (p1)
256 p1++;
257 else
258 p1 = base_path;
259 if (p1 > p)
260 p = p1;
261 len = p - base_path;
262 if (len > dest_size - 1)
263 len = dest_size - 1;
264 memcpy(dest, base_path, len);
265 dest[len] = '\0';
266 pstrcat(dest, dest_size, filename);
270 void bdrv_get_full_backing_filename(BlockDriverState *bs, char *dest, size_t sz)
272 if (bs->backing_file[0] == '\0' || path_has_protocol(bs->backing_file)) {
273 pstrcpy(dest, sz, bs->backing_file);
274 } else {
275 path_combine(dest, sz, bs->filename, bs->backing_file);
279 void bdrv_register(BlockDriver *bdrv)
281 /* Block drivers without coroutine functions need emulation */
282 if (!bdrv->bdrv_co_readv) {
283 bdrv->bdrv_co_readv = bdrv_co_readv_em;
284 bdrv->bdrv_co_writev = bdrv_co_writev_em;
286 /* bdrv_co_readv_em()/brdv_co_writev_em() work in terms of aio, so if
287 * the block driver lacks aio we need to emulate that too.
289 if (!bdrv->bdrv_aio_readv) {
290 /* add AIO emulation layer */
291 bdrv->bdrv_aio_readv = bdrv_aio_readv_em;
292 bdrv->bdrv_aio_writev = bdrv_aio_writev_em;
296 QLIST_INSERT_HEAD(&bdrv_drivers, bdrv, list);
299 /* create a new block device (by default it is empty) */
300 BlockDriverState *bdrv_new(const char *device_name)
302 BlockDriverState *bs;
304 bs = g_malloc0(sizeof(BlockDriverState));
305 pstrcpy(bs->device_name, sizeof(bs->device_name), device_name);
306 if (device_name[0] != '\0') {
307 QTAILQ_INSERT_TAIL(&bdrv_states, bs, list);
309 bdrv_iostatus_disable(bs);
310 notifier_list_init(&bs->close_notifiers);
312 return bs;
315 void bdrv_add_close_notifier(BlockDriverState *bs, Notifier *notify)
317 notifier_list_add(&bs->close_notifiers, notify);
320 BlockDriver *bdrv_find_format(const char *format_name)
322 BlockDriver *drv1;
323 QLIST_FOREACH(drv1, &bdrv_drivers, list) {
324 if (!strcmp(drv1->format_name, format_name)) {
325 return drv1;
328 return NULL;
331 static int bdrv_is_whitelisted(BlockDriver *drv)
333 static const char *whitelist[] = {
334 CONFIG_BDRV_WHITELIST
336 const char **p;
338 if (!whitelist[0])
339 return 1; /* no whitelist, anything goes */
341 for (p = whitelist; *p; p++) {
342 if (!strcmp(drv->format_name, *p)) {
343 return 1;
346 return 0;
349 BlockDriver *bdrv_find_whitelisted_format(const char *format_name)
351 BlockDriver *drv = bdrv_find_format(format_name);
352 return drv && bdrv_is_whitelisted(drv) ? drv : NULL;
355 typedef struct CreateCo {
356 BlockDriver *drv;
357 char *filename;
358 QEMUOptionParameter *options;
359 int ret;
360 } CreateCo;
362 static void coroutine_fn bdrv_create_co_entry(void *opaque)
364 CreateCo *cco = opaque;
365 assert(cco->drv);
367 cco->ret = cco->drv->bdrv_create(cco->filename, cco->options);
370 int bdrv_create(BlockDriver *drv, const char* filename,
371 QEMUOptionParameter *options)
373 int ret;
375 Coroutine *co;
376 CreateCo cco = {
377 .drv = drv,
378 .filename = g_strdup(filename),
379 .options = options,
380 .ret = NOT_DONE,
383 if (!drv->bdrv_create) {
384 ret = -ENOTSUP;
385 goto out;
388 if (qemu_in_coroutine()) {
389 /* Fast-path if already in coroutine context */
390 bdrv_create_co_entry(&cco);
391 } else {
392 co = qemu_coroutine_create(bdrv_create_co_entry);
393 qemu_coroutine_enter(co, &cco);
394 while (cco.ret == NOT_DONE) {
395 qemu_aio_wait();
399 ret = cco.ret;
401 out:
402 g_free(cco.filename);
403 return ret;
406 int bdrv_create_file(const char* filename, QEMUOptionParameter *options)
408 BlockDriver *drv;
410 drv = bdrv_find_protocol(filename);
411 if (drv == NULL) {
412 return -ENOENT;
415 return bdrv_create(drv, filename, options);
419 * Create a uniquely-named empty temporary file.
420 * Return 0 upon success, otherwise a negative errno value.
422 int get_tmp_filename(char *filename, int size)
424 #ifdef _WIN32
425 char temp_dir[MAX_PATH];
426 /* GetTempFileName requires that its output buffer (4th param)
427 have length MAX_PATH or greater. */
428 assert(size >= MAX_PATH);
429 return (GetTempPath(MAX_PATH, temp_dir)
430 && GetTempFileName(temp_dir, "qem", 0, filename)
431 ? 0 : -GetLastError());
432 #else
433 int fd;
434 const char *tmpdir;
435 tmpdir = getenv("TMPDIR");
436 if (!tmpdir)
437 tmpdir = "/tmp";
438 if (snprintf(filename, size, "%s/vl.XXXXXX", tmpdir) >= size) {
439 return -EOVERFLOW;
441 fd = mkstemp(filename);
442 if (fd < 0) {
443 return -errno;
445 if (close(fd) != 0) {
446 unlink(filename);
447 return -errno;
449 return 0;
450 #endif
454 * Detect host devices. By convention, /dev/cdrom[N] is always
455 * recognized as a host CDROM.
457 static BlockDriver *find_hdev_driver(const char *filename)
459 int score_max = 0, score;
460 BlockDriver *drv = NULL, *d;
462 QLIST_FOREACH(d, &bdrv_drivers, list) {
463 if (d->bdrv_probe_device) {
464 score = d->bdrv_probe_device(filename);
465 if (score > score_max) {
466 score_max = score;
467 drv = d;
472 return drv;
475 BlockDriver *bdrv_find_protocol(const char *filename)
477 BlockDriver *drv1;
478 char protocol[128];
479 int len;
480 const char *p;
482 /* TODO Drivers without bdrv_file_open must be specified explicitly */
485 * XXX(hch): we really should not let host device detection
486 * override an explicit protocol specification, but moving this
487 * later breaks access to device names with colons in them.
488 * Thanks to the brain-dead persistent naming schemes on udev-
489 * based Linux systems those actually are quite common.
491 drv1 = find_hdev_driver(filename);
492 if (drv1) {
493 return drv1;
496 if (!path_has_protocol(filename)) {
497 return bdrv_find_format("file");
499 p = strchr(filename, ':');
500 assert(p != NULL);
501 len = p - filename;
502 if (len > sizeof(protocol) - 1)
503 len = sizeof(protocol) - 1;
504 memcpy(protocol, filename, len);
505 protocol[len] = '\0';
506 QLIST_FOREACH(drv1, &bdrv_drivers, list) {
507 if (drv1->protocol_name &&
508 !strcmp(drv1->protocol_name, protocol)) {
509 return drv1;
512 return NULL;
515 static int find_image_format(BlockDriverState *bs, const char *filename,
516 BlockDriver **pdrv)
518 int score, score_max;
519 BlockDriver *drv1, *drv;
520 uint8_t buf[2048];
521 int ret = 0;
523 /* Return the raw BlockDriver * to scsi-generic devices or empty drives */
524 if (bs->sg || !bdrv_is_inserted(bs) || bdrv_getlength(bs) == 0) {
525 drv = bdrv_find_format("raw");
526 if (!drv) {
527 ret = -ENOENT;
529 *pdrv = drv;
530 return ret;
533 ret = bdrv_pread(bs, 0, buf, sizeof(buf));
534 if (ret < 0) {
535 *pdrv = NULL;
536 return ret;
539 score_max = 0;
540 drv = NULL;
541 QLIST_FOREACH(drv1, &bdrv_drivers, list) {
542 if (drv1->bdrv_probe) {
543 score = drv1->bdrv_probe(buf, ret, filename);
544 if (score > score_max) {
545 score_max = score;
546 drv = drv1;
550 if (!drv) {
551 ret = -ENOENT;
553 *pdrv = drv;
554 return ret;
558 * Set the current 'total_sectors' value
560 static int refresh_total_sectors(BlockDriverState *bs, int64_t hint)
562 BlockDriver *drv = bs->drv;
564 /* Do not attempt drv->bdrv_getlength() on scsi-generic devices */
565 if (bs->sg)
566 return 0;
568 /* query actual device if possible, otherwise just trust the hint */
569 if (drv->bdrv_getlength) {
570 int64_t length = drv->bdrv_getlength(bs);
571 if (length < 0) {
572 return length;
574 hint = length >> BDRV_SECTOR_BITS;
577 bs->total_sectors = hint;
578 return 0;
582 * Set open flags for a given discard mode
584 * Return 0 on success, -1 if the discard mode was invalid.
586 int bdrv_parse_discard_flags(const char *mode, int *flags)
588 *flags &= ~BDRV_O_UNMAP;
590 if (!strcmp(mode, "off") || !strcmp(mode, "ignore")) {
591 /* do nothing */
592 } else if (!strcmp(mode, "on") || !strcmp(mode, "unmap")) {
593 *flags |= BDRV_O_UNMAP;
594 } else {
595 return -1;
598 return 0;
602 * Set open flags for a given cache mode
604 * Return 0 on success, -1 if the cache mode was invalid.
606 int bdrv_parse_cache_flags(const char *mode, int *flags)
608 *flags &= ~BDRV_O_CACHE_MASK;
610 if (!strcmp(mode, "off") || !strcmp(mode, "none")) {
611 *flags |= BDRV_O_NOCACHE | BDRV_O_CACHE_WB;
612 } else if (!strcmp(mode, "directsync")) {
613 *flags |= BDRV_O_NOCACHE;
614 } else if (!strcmp(mode, "writeback")) {
615 *flags |= BDRV_O_CACHE_WB;
616 } else if (!strcmp(mode, "unsafe")) {
617 *flags |= BDRV_O_CACHE_WB;
618 *flags |= BDRV_O_NO_FLUSH;
619 } else if (!strcmp(mode, "writethrough")) {
620 /* this is the default */
621 } else {
622 return -1;
625 return 0;
629 * The copy-on-read flag is actually a reference count so multiple users may
630 * use the feature without worrying about clobbering its previous state.
631 * Copy-on-read stays enabled until all users have called to disable it.
633 void bdrv_enable_copy_on_read(BlockDriverState *bs)
635 bs->copy_on_read++;
638 void bdrv_disable_copy_on_read(BlockDriverState *bs)
640 assert(bs->copy_on_read > 0);
641 bs->copy_on_read--;
644 static int bdrv_open_flags(BlockDriverState *bs, int flags)
646 int open_flags = flags | BDRV_O_CACHE_WB;
649 * Clear flags that are internal to the block layer before opening the
650 * image.
652 open_flags &= ~(BDRV_O_SNAPSHOT | BDRV_O_NO_BACKING);
655 * Snapshots should be writable.
657 if (bs->is_temporary) {
658 open_flags |= BDRV_O_RDWR;
661 return open_flags;
665 * Common part for opening disk images and files
667 * Removes all processed options from *options.
669 static int bdrv_open_common(BlockDriverState *bs, BlockDriverState *file,
670 QDict *options, int flags, BlockDriver *drv)
672 int ret, open_flags;
673 const char *filename;
675 assert(drv != NULL);
676 assert(bs->file == NULL);
677 assert(options != NULL && bs->options != options);
679 if (file != NULL) {
680 filename = file->filename;
681 } else {
682 filename = qdict_get_try_str(options, "filename");
685 trace_bdrv_open_common(bs, filename ?: "", flags, drv->format_name);
687 if (use_bdrv_whitelist && !bdrv_is_whitelisted(drv)) {
688 return -ENOTSUP;
691 /* bdrv_open() with directly using a protocol as drv. This layer is already
692 * opened, so assign it to bs (while file becomes a closed BlockDriverState)
693 * and return immediately. */
694 if (file != NULL && drv->bdrv_file_open) {
695 bdrv_swap(file, bs);
696 return 0;
699 bs->open_flags = flags;
700 bs->buffer_alignment = 512;
702 assert(bs->copy_on_read == 0); /* bdrv_new() and bdrv_close() make it so */
703 if ((flags & BDRV_O_RDWR) && (flags & BDRV_O_COPY_ON_READ)) {
704 bdrv_enable_copy_on_read(bs);
707 if (filename != NULL) {
708 pstrcpy(bs->filename, sizeof(bs->filename), filename);
709 } else {
710 bs->filename[0] = '\0';
713 bs->drv = drv;
714 bs->opaque = g_malloc0(drv->instance_size);
716 bs->enable_write_cache = !!(flags & BDRV_O_CACHE_WB);
717 open_flags = bdrv_open_flags(bs, flags);
719 bs->read_only = !(open_flags & BDRV_O_RDWR);
721 /* Open the image, either directly or using a protocol */
722 if (drv->bdrv_file_open) {
723 assert(file == NULL);
724 assert(drv->bdrv_parse_filename || filename != NULL);
725 ret = drv->bdrv_file_open(bs, options, open_flags);
726 } else {
727 if (file == NULL) {
728 qerror_report(ERROR_CLASS_GENERIC_ERROR, "Can't use '%s' as a "
729 "block driver for the protocol level",
730 drv->format_name);
731 ret = -EINVAL;
732 goto free_and_fail;
734 assert(file != NULL);
735 bs->file = file;
736 ret = drv->bdrv_open(bs, options, open_flags);
739 if (ret < 0) {
740 goto free_and_fail;
743 ret = refresh_total_sectors(bs, bs->total_sectors);
744 if (ret < 0) {
745 goto free_and_fail;
748 #ifndef _WIN32
749 if (bs->is_temporary) {
750 assert(filename != NULL);
751 unlink(filename);
753 #endif
754 return 0;
756 free_and_fail:
757 bs->file = NULL;
758 g_free(bs->opaque);
759 bs->opaque = NULL;
760 bs->drv = NULL;
761 return ret;
765 * Opens a file using a protocol (file, host_device, nbd, ...)
767 * options is a QDict of options to pass to the block drivers, or NULL for an
768 * empty set of options. The reference to the QDict belongs to the block layer
769 * after the call (even on failure), so if the caller intends to reuse the
770 * dictionary, it needs to use QINCREF() before calling bdrv_file_open.
772 int bdrv_file_open(BlockDriverState **pbs, const char *filename,
773 QDict *options, int flags)
775 BlockDriverState *bs;
776 BlockDriver *drv;
777 const char *drvname;
778 int ret;
780 /* NULL means an empty set of options */
781 if (options == NULL) {
782 options = qdict_new();
785 bs = bdrv_new("");
786 bs->options = options;
787 options = qdict_clone_shallow(options);
789 /* Fetch the file name from the options QDict if necessary */
790 if (!filename) {
791 filename = qdict_get_try_str(options, "filename");
792 } else if (filename && !qdict_haskey(options, "filename")) {
793 qdict_put(options, "filename", qstring_from_str(filename));
794 } else {
795 qerror_report(ERROR_CLASS_GENERIC_ERROR, "Can't specify 'file' and "
796 "'filename' options at the same time");
797 ret = -EINVAL;
798 goto fail;
801 /* Find the right block driver */
802 drvname = qdict_get_try_str(options, "driver");
803 if (drvname) {
804 drv = bdrv_find_whitelisted_format(drvname);
805 qdict_del(options, "driver");
806 } else if (filename) {
807 drv = bdrv_find_protocol(filename);
808 } else {
809 qerror_report(ERROR_CLASS_GENERIC_ERROR,
810 "Must specify either driver or file");
811 drv = NULL;
814 if (!drv) {
815 ret = -ENOENT;
816 goto fail;
819 /* Parse the filename and open it */
820 if (drv->bdrv_parse_filename && filename) {
821 Error *local_err = NULL;
822 drv->bdrv_parse_filename(filename, options, &local_err);
823 if (error_is_set(&local_err)) {
824 qerror_report_err(local_err);
825 error_free(local_err);
826 ret = -EINVAL;
827 goto fail;
829 qdict_del(options, "filename");
830 } else if (!drv->bdrv_parse_filename && !filename) {
831 qerror_report(ERROR_CLASS_GENERIC_ERROR,
832 "The '%s' block driver requires a file name",
833 drv->format_name);
834 ret = -EINVAL;
835 goto fail;
838 ret = bdrv_open_common(bs, NULL, options, flags, drv);
839 if (ret < 0) {
840 goto fail;
843 /* Check if any unknown options were used */
844 if (qdict_size(options) != 0) {
845 const QDictEntry *entry = qdict_first(options);
846 qerror_report(ERROR_CLASS_GENERIC_ERROR, "Block protocol '%s' doesn't "
847 "support the option '%s'",
848 drv->format_name, entry->key);
849 ret = -EINVAL;
850 goto fail;
852 QDECREF(options);
854 bs->growable = 1;
855 *pbs = bs;
856 return 0;
858 fail:
859 QDECREF(options);
860 if (!bs->drv) {
861 QDECREF(bs->options);
863 bdrv_delete(bs);
864 return ret;
868 * Opens the backing file for a BlockDriverState if not yet open
870 * options is a QDict of options to pass to the block drivers, or NULL for an
871 * empty set of options. The reference to the QDict is transferred to this
872 * function (even on failure), so if the caller intends to reuse the dictionary,
873 * it needs to use QINCREF() before calling bdrv_file_open.
875 int bdrv_open_backing_file(BlockDriverState *bs, QDict *options)
877 char backing_filename[PATH_MAX];
878 int back_flags, ret;
879 BlockDriver *back_drv = NULL;
881 if (bs->backing_hd != NULL) {
882 QDECREF(options);
883 return 0;
886 /* NULL means an empty set of options */
887 if (options == NULL) {
888 options = qdict_new();
891 bs->open_flags &= ~BDRV_O_NO_BACKING;
892 if (qdict_haskey(options, "file.filename")) {
893 backing_filename[0] = '\0';
894 } else if (bs->backing_file[0] == '\0' && qdict_size(options) == 0) {
895 QDECREF(options);
896 return 0;
899 bs->backing_hd = bdrv_new("");
900 bdrv_get_full_backing_filename(bs, backing_filename,
901 sizeof(backing_filename));
903 if (bs->backing_format[0] != '\0') {
904 back_drv = bdrv_find_format(bs->backing_format);
907 /* backing files always opened read-only */
908 back_flags = bs->open_flags & ~(BDRV_O_RDWR | BDRV_O_SNAPSHOT);
910 ret = bdrv_open(bs->backing_hd,
911 *backing_filename ? backing_filename : NULL, options,
912 back_flags, back_drv);
913 if (ret < 0) {
914 bdrv_delete(bs->backing_hd);
915 bs->backing_hd = NULL;
916 bs->open_flags |= BDRV_O_NO_BACKING;
917 return ret;
919 return 0;
922 static void extract_subqdict(QDict *src, QDict **dst, const char *start)
924 const QDictEntry *entry, *next;
925 const char *p;
927 *dst = qdict_new();
928 entry = qdict_first(src);
930 while (entry != NULL) {
931 next = qdict_next(src, entry);
932 if (strstart(entry->key, start, &p)) {
933 qobject_incref(entry->value);
934 qdict_put_obj(*dst, p, entry->value);
935 qdict_del(src, entry->key);
937 entry = next;
942 * Opens a disk image (raw, qcow2, vmdk, ...)
944 * options is a QDict of options to pass to the block drivers, or NULL for an
945 * empty set of options. The reference to the QDict belongs to the block layer
946 * after the call (even on failure), so if the caller intends to reuse the
947 * dictionary, it needs to use QINCREF() before calling bdrv_open.
949 int bdrv_open(BlockDriverState *bs, const char *filename, QDict *options,
950 int flags, BlockDriver *drv)
952 int ret;
953 /* TODO: extra byte is a hack to ensure MAX_PATH space on Windows. */
954 char tmp_filename[PATH_MAX + 1];
955 BlockDriverState *file = NULL;
956 QDict *file_options = NULL;
958 /* NULL means an empty set of options */
959 if (options == NULL) {
960 options = qdict_new();
963 bs->options = options;
964 options = qdict_clone_shallow(options);
966 /* For snapshot=on, create a temporary qcow2 overlay */
967 if (flags & BDRV_O_SNAPSHOT) {
968 BlockDriverState *bs1;
969 int64_t total_size;
970 BlockDriver *bdrv_qcow2;
971 QEMUOptionParameter *create_options;
972 char backing_filename[PATH_MAX];
974 if (qdict_size(options) != 0) {
975 error_report("Can't use snapshot=on with driver-specific options");
976 ret = -EINVAL;
977 goto fail;
979 assert(filename != NULL);
981 /* if snapshot, we create a temporary backing file and open it
982 instead of opening 'filename' directly */
984 /* if there is a backing file, use it */
985 bs1 = bdrv_new("");
986 ret = bdrv_open(bs1, filename, NULL, 0, drv);
987 if (ret < 0) {
988 bdrv_delete(bs1);
989 goto fail;
991 total_size = bdrv_getlength(bs1) & BDRV_SECTOR_MASK;
993 bdrv_delete(bs1);
995 ret = get_tmp_filename(tmp_filename, sizeof(tmp_filename));
996 if (ret < 0) {
997 goto fail;
1000 /* Real path is meaningless for protocols */
1001 if (path_has_protocol(filename)) {
1002 snprintf(backing_filename, sizeof(backing_filename),
1003 "%s", filename);
1004 } else if (!realpath(filename, backing_filename)) {
1005 ret = -errno;
1006 goto fail;
1009 bdrv_qcow2 = bdrv_find_format("qcow2");
1010 create_options = parse_option_parameters("", bdrv_qcow2->create_options,
1011 NULL);
1013 set_option_parameter_int(create_options, BLOCK_OPT_SIZE, total_size);
1014 set_option_parameter(create_options, BLOCK_OPT_BACKING_FILE,
1015 backing_filename);
1016 if (drv) {
1017 set_option_parameter(create_options, BLOCK_OPT_BACKING_FMT,
1018 drv->format_name);
1021 ret = bdrv_create(bdrv_qcow2, tmp_filename, create_options);
1022 free_option_parameters(create_options);
1023 if (ret < 0) {
1024 goto fail;
1027 filename = tmp_filename;
1028 drv = bdrv_qcow2;
1029 bs->is_temporary = 1;
1032 /* Open image file without format layer */
1033 if (flags & BDRV_O_RDWR) {
1034 flags |= BDRV_O_ALLOW_RDWR;
1037 extract_subqdict(options, &file_options, "file.");
1039 ret = bdrv_file_open(&file, filename, file_options,
1040 bdrv_open_flags(bs, flags));
1041 if (ret < 0) {
1042 goto fail;
1045 /* Find the right image format driver */
1046 if (!drv) {
1047 ret = find_image_format(file, filename, &drv);
1050 if (!drv) {
1051 goto unlink_and_fail;
1054 /* Open the image */
1055 ret = bdrv_open_common(bs, file, options, flags, drv);
1056 if (ret < 0) {
1057 goto unlink_and_fail;
1060 if (bs->file != file) {
1061 bdrv_delete(file);
1062 file = NULL;
1065 /* If there is a backing file, use it */
1066 if ((flags & BDRV_O_NO_BACKING) == 0) {
1067 QDict *backing_options;
1069 extract_subqdict(options, &backing_options, "backing.");
1070 ret = bdrv_open_backing_file(bs, backing_options);
1071 if (ret < 0) {
1072 goto close_and_fail;
1076 /* Check if any unknown options were used */
1077 if (qdict_size(options) != 0) {
1078 const QDictEntry *entry = qdict_first(options);
1079 qerror_report(ERROR_CLASS_GENERIC_ERROR, "Block format '%s' used by "
1080 "device '%s' doesn't support the option '%s'",
1081 drv->format_name, bs->device_name, entry->key);
1083 ret = -EINVAL;
1084 goto close_and_fail;
1086 QDECREF(options);
1088 if (!bdrv_key_required(bs)) {
1089 bdrv_dev_change_media_cb(bs, true);
1092 /* throttling disk I/O limits */
1093 if (bs->io_limits_enabled) {
1094 bdrv_io_limits_enable(bs);
1097 return 0;
1099 unlink_and_fail:
1100 if (file != NULL) {
1101 bdrv_delete(file);
1103 if (bs->is_temporary) {
1104 unlink(filename);
1106 fail:
1107 QDECREF(bs->options);
1108 QDECREF(options);
1109 bs->options = NULL;
1110 return ret;
1112 close_and_fail:
1113 bdrv_close(bs);
1114 QDECREF(options);
1115 return ret;
1118 typedef struct BlockReopenQueueEntry {
1119 bool prepared;
1120 BDRVReopenState state;
1121 QSIMPLEQ_ENTRY(BlockReopenQueueEntry) entry;
1122 } BlockReopenQueueEntry;
1125 * Adds a BlockDriverState to a simple queue for an atomic, transactional
1126 * reopen of multiple devices.
1128 * bs_queue can either be an existing BlockReopenQueue that has had QSIMPLE_INIT
1129 * already performed, or alternatively may be NULL a new BlockReopenQueue will
1130 * be created and initialized. This newly created BlockReopenQueue should be
1131 * passed back in for subsequent calls that are intended to be of the same
1132 * atomic 'set'.
1134 * bs is the BlockDriverState to add to the reopen queue.
1136 * flags contains the open flags for the associated bs
1138 * returns a pointer to bs_queue, which is either the newly allocated
1139 * bs_queue, or the existing bs_queue being used.
1142 BlockReopenQueue *bdrv_reopen_queue(BlockReopenQueue *bs_queue,
1143 BlockDriverState *bs, int flags)
1145 assert(bs != NULL);
1147 BlockReopenQueueEntry *bs_entry;
1148 if (bs_queue == NULL) {
1149 bs_queue = g_new0(BlockReopenQueue, 1);
1150 QSIMPLEQ_INIT(bs_queue);
1153 if (bs->file) {
1154 bdrv_reopen_queue(bs_queue, bs->file, flags);
1157 bs_entry = g_new0(BlockReopenQueueEntry, 1);
1158 QSIMPLEQ_INSERT_TAIL(bs_queue, bs_entry, entry);
1160 bs_entry->state.bs = bs;
1161 bs_entry->state.flags = flags;
1163 return bs_queue;
1167 * Reopen multiple BlockDriverStates atomically & transactionally.
1169 * The queue passed in (bs_queue) must have been built up previous
1170 * via bdrv_reopen_queue().
1172 * Reopens all BDS specified in the queue, with the appropriate
1173 * flags. All devices are prepared for reopen, and failure of any
1174 * device will cause all device changes to be abandonded, and intermediate
1175 * data cleaned up.
1177 * If all devices prepare successfully, then the changes are committed
1178 * to all devices.
1181 int bdrv_reopen_multiple(BlockReopenQueue *bs_queue, Error **errp)
1183 int ret = -1;
1184 BlockReopenQueueEntry *bs_entry, *next;
1185 Error *local_err = NULL;
1187 assert(bs_queue != NULL);
1189 bdrv_drain_all();
1191 QSIMPLEQ_FOREACH(bs_entry, bs_queue, entry) {
1192 if (bdrv_reopen_prepare(&bs_entry->state, bs_queue, &local_err)) {
1193 error_propagate(errp, local_err);
1194 goto cleanup;
1196 bs_entry->prepared = true;
1199 /* If we reach this point, we have success and just need to apply the
1200 * changes
1202 QSIMPLEQ_FOREACH(bs_entry, bs_queue, entry) {
1203 bdrv_reopen_commit(&bs_entry->state);
1206 ret = 0;
1208 cleanup:
1209 QSIMPLEQ_FOREACH_SAFE(bs_entry, bs_queue, entry, next) {
1210 if (ret && bs_entry->prepared) {
1211 bdrv_reopen_abort(&bs_entry->state);
1213 g_free(bs_entry);
1215 g_free(bs_queue);
1216 return ret;
1220 /* Reopen a single BlockDriverState with the specified flags. */
1221 int bdrv_reopen(BlockDriverState *bs, int bdrv_flags, Error **errp)
1223 int ret = -1;
1224 Error *local_err = NULL;
1225 BlockReopenQueue *queue = bdrv_reopen_queue(NULL, bs, bdrv_flags);
1227 ret = bdrv_reopen_multiple(queue, &local_err);
1228 if (local_err != NULL) {
1229 error_propagate(errp, local_err);
1231 return ret;
1236 * Prepares a BlockDriverState for reopen. All changes are staged in the
1237 * 'opaque' field of the BDRVReopenState, which is used and allocated by
1238 * the block driver layer .bdrv_reopen_prepare()
1240 * bs is the BlockDriverState to reopen
1241 * flags are the new open flags
1242 * queue is the reopen queue
1244 * Returns 0 on success, non-zero on error. On error errp will be set
1245 * as well.
1247 * On failure, bdrv_reopen_abort() will be called to clean up any data.
1248 * It is the responsibility of the caller to then call the abort() or
1249 * commit() for any other BDS that have been left in a prepare() state
1252 int bdrv_reopen_prepare(BDRVReopenState *reopen_state, BlockReopenQueue *queue,
1253 Error **errp)
1255 int ret = -1;
1256 Error *local_err = NULL;
1257 BlockDriver *drv;
1259 assert(reopen_state != NULL);
1260 assert(reopen_state->bs->drv != NULL);
1261 drv = reopen_state->bs->drv;
1263 /* if we are to stay read-only, do not allow permission change
1264 * to r/w */
1265 if (!(reopen_state->bs->open_flags & BDRV_O_ALLOW_RDWR) &&
1266 reopen_state->flags & BDRV_O_RDWR) {
1267 error_set(errp, QERR_DEVICE_IS_READ_ONLY,
1268 reopen_state->bs->device_name);
1269 goto error;
1273 ret = bdrv_flush(reopen_state->bs);
1274 if (ret) {
1275 error_set(errp, ERROR_CLASS_GENERIC_ERROR, "Error (%s) flushing drive",
1276 strerror(-ret));
1277 goto error;
1280 if (drv->bdrv_reopen_prepare) {
1281 ret = drv->bdrv_reopen_prepare(reopen_state, queue, &local_err);
1282 if (ret) {
1283 if (local_err != NULL) {
1284 error_propagate(errp, local_err);
1285 } else {
1286 error_set(errp, QERR_OPEN_FILE_FAILED,
1287 reopen_state->bs->filename);
1289 goto error;
1291 } else {
1292 /* It is currently mandatory to have a bdrv_reopen_prepare()
1293 * handler for each supported drv. */
1294 error_set(errp, QERR_BLOCK_FORMAT_FEATURE_NOT_SUPPORTED,
1295 drv->format_name, reopen_state->bs->device_name,
1296 "reopening of file");
1297 ret = -1;
1298 goto error;
1301 ret = 0;
1303 error:
1304 return ret;
1308 * Takes the staged changes for the reopen from bdrv_reopen_prepare(), and
1309 * makes them final by swapping the staging BlockDriverState contents into
1310 * the active BlockDriverState contents.
1312 void bdrv_reopen_commit(BDRVReopenState *reopen_state)
1314 BlockDriver *drv;
1316 assert(reopen_state != NULL);
1317 drv = reopen_state->bs->drv;
1318 assert(drv != NULL);
1320 /* If there are any driver level actions to take */
1321 if (drv->bdrv_reopen_commit) {
1322 drv->bdrv_reopen_commit(reopen_state);
1325 /* set BDS specific flags now */
1326 reopen_state->bs->open_flags = reopen_state->flags;
1327 reopen_state->bs->enable_write_cache = !!(reopen_state->flags &
1328 BDRV_O_CACHE_WB);
1329 reopen_state->bs->read_only = !(reopen_state->flags & BDRV_O_RDWR);
1333 * Abort the reopen, and delete and free the staged changes in
1334 * reopen_state
1336 void bdrv_reopen_abort(BDRVReopenState *reopen_state)
1338 BlockDriver *drv;
1340 assert(reopen_state != NULL);
1341 drv = reopen_state->bs->drv;
1342 assert(drv != NULL);
1344 if (drv->bdrv_reopen_abort) {
1345 drv->bdrv_reopen_abort(reopen_state);
1350 void bdrv_close(BlockDriverState *bs)
1352 bdrv_flush(bs);
1353 if (bs->job) {
1354 block_job_cancel_sync(bs->job);
1356 bdrv_drain_all();
1357 notifier_list_notify(&bs->close_notifiers, bs);
1359 if (bs->drv) {
1360 if (bs == bs_snapshots) {
1361 bs_snapshots = NULL;
1363 if (bs->backing_hd) {
1364 bdrv_delete(bs->backing_hd);
1365 bs->backing_hd = NULL;
1367 bs->drv->bdrv_close(bs);
1368 g_free(bs->opaque);
1369 #ifdef _WIN32
1370 if (bs->is_temporary) {
1371 unlink(bs->filename);
1373 #endif
1374 bs->opaque = NULL;
1375 bs->drv = NULL;
1376 bs->copy_on_read = 0;
1377 bs->backing_file[0] = '\0';
1378 bs->backing_format[0] = '\0';
1379 bs->total_sectors = 0;
1380 bs->encrypted = 0;
1381 bs->valid_key = 0;
1382 bs->sg = 0;
1383 bs->growable = 0;
1384 QDECREF(bs->options);
1385 bs->options = NULL;
1387 if (bs->file != NULL) {
1388 bdrv_delete(bs->file);
1389 bs->file = NULL;
1393 bdrv_dev_change_media_cb(bs, false);
1395 /*throttling disk I/O limits*/
1396 if (bs->io_limits_enabled) {
1397 bdrv_io_limits_disable(bs);
1401 void bdrv_close_all(void)
1403 BlockDriverState *bs;
1405 QTAILQ_FOREACH(bs, &bdrv_states, list) {
1406 bdrv_close(bs);
1411 * Wait for pending requests to complete across all BlockDriverStates
1413 * This function does not flush data to disk, use bdrv_flush_all() for that
1414 * after calling this function.
1416 * Note that completion of an asynchronous I/O operation can trigger any
1417 * number of other I/O operations on other devices---for example a coroutine
1418 * can be arbitrarily complex and a constant flow of I/O can come until the
1419 * coroutine is complete. Because of this, it is not possible to have a
1420 * function to drain a single device's I/O queue.
1422 void bdrv_drain_all(void)
1424 BlockDriverState *bs;
1425 bool busy;
1427 do {
1428 busy = qemu_aio_wait();
1430 /* FIXME: We do not have timer support here, so this is effectively
1431 * a busy wait.
1433 QTAILQ_FOREACH(bs, &bdrv_states, list) {
1434 if (!qemu_co_queue_empty(&bs->throttled_reqs)) {
1435 qemu_co_queue_restart_all(&bs->throttled_reqs);
1436 busy = true;
1439 } while (busy);
1441 /* If requests are still pending there is a bug somewhere */
1442 QTAILQ_FOREACH(bs, &bdrv_states, list) {
1443 assert(QLIST_EMPTY(&bs->tracked_requests));
1444 assert(qemu_co_queue_empty(&bs->throttled_reqs));
1448 /* make a BlockDriverState anonymous by removing from bdrv_state list.
1449 Also, NULL terminate the device_name to prevent double remove */
1450 void bdrv_make_anon(BlockDriverState *bs)
1452 if (bs->device_name[0] != '\0') {
1453 QTAILQ_REMOVE(&bdrv_states, bs, list);
1455 bs->device_name[0] = '\0';
1458 static void bdrv_rebind(BlockDriverState *bs)
1460 if (bs->drv && bs->drv->bdrv_rebind) {
1461 bs->drv->bdrv_rebind(bs);
1465 static void bdrv_move_feature_fields(BlockDriverState *bs_dest,
1466 BlockDriverState *bs_src)
1468 /* move some fields that need to stay attached to the device */
1469 bs_dest->open_flags = bs_src->open_flags;
1471 /* dev info */
1472 bs_dest->dev_ops = bs_src->dev_ops;
1473 bs_dest->dev_opaque = bs_src->dev_opaque;
1474 bs_dest->dev = bs_src->dev;
1475 bs_dest->buffer_alignment = bs_src->buffer_alignment;
1476 bs_dest->copy_on_read = bs_src->copy_on_read;
1478 bs_dest->enable_write_cache = bs_src->enable_write_cache;
1480 /* i/o timing parameters */
1481 bs_dest->slice_start = bs_src->slice_start;
1482 bs_dest->slice_end = bs_src->slice_end;
1483 bs_dest->slice_submitted = bs_src->slice_submitted;
1484 bs_dest->io_limits = bs_src->io_limits;
1485 bs_dest->throttled_reqs = bs_src->throttled_reqs;
1486 bs_dest->block_timer = bs_src->block_timer;
1487 bs_dest->io_limits_enabled = bs_src->io_limits_enabled;
1489 /* r/w error */
1490 bs_dest->on_read_error = bs_src->on_read_error;
1491 bs_dest->on_write_error = bs_src->on_write_error;
1493 /* i/o status */
1494 bs_dest->iostatus_enabled = bs_src->iostatus_enabled;
1495 bs_dest->iostatus = bs_src->iostatus;
1497 /* dirty bitmap */
1498 bs_dest->dirty_bitmap = bs_src->dirty_bitmap;
1500 /* job */
1501 bs_dest->in_use = bs_src->in_use;
1502 bs_dest->job = bs_src->job;
1504 /* keep the same entry in bdrv_states */
1505 pstrcpy(bs_dest->device_name, sizeof(bs_dest->device_name),
1506 bs_src->device_name);
1507 bs_dest->list = bs_src->list;
1511 * Swap bs contents for two image chains while they are live,
1512 * while keeping required fields on the BlockDriverState that is
1513 * actually attached to a device.
1515 * This will modify the BlockDriverState fields, and swap contents
1516 * between bs_new and bs_old. Both bs_new and bs_old are modified.
1518 * bs_new is required to be anonymous.
1520 * This function does not create any image files.
1522 void bdrv_swap(BlockDriverState *bs_new, BlockDriverState *bs_old)
1524 BlockDriverState tmp;
1526 /* bs_new must be anonymous and shouldn't have anything fancy enabled */
1527 assert(bs_new->device_name[0] == '\0');
1528 assert(bs_new->dirty_bitmap == NULL);
1529 assert(bs_new->job == NULL);
1530 assert(bs_new->dev == NULL);
1531 assert(bs_new->in_use == 0);
1532 assert(bs_new->io_limits_enabled == false);
1533 assert(bs_new->block_timer == NULL);
1535 tmp = *bs_new;
1536 *bs_new = *bs_old;
1537 *bs_old = tmp;
1539 /* there are some fields that should not be swapped, move them back */
1540 bdrv_move_feature_fields(&tmp, bs_old);
1541 bdrv_move_feature_fields(bs_old, bs_new);
1542 bdrv_move_feature_fields(bs_new, &tmp);
1544 /* bs_new shouldn't be in bdrv_states even after the swap! */
1545 assert(bs_new->device_name[0] == '\0');
1547 /* Check a few fields that should remain attached to the device */
1548 assert(bs_new->dev == NULL);
1549 assert(bs_new->job == NULL);
1550 assert(bs_new->in_use == 0);
1551 assert(bs_new->io_limits_enabled == false);
1552 assert(bs_new->block_timer == NULL);
1554 bdrv_rebind(bs_new);
1555 bdrv_rebind(bs_old);
1559 * Add new bs contents at the top of an image chain while the chain is
1560 * live, while keeping required fields on the top layer.
1562 * This will modify the BlockDriverState fields, and swap contents
1563 * between bs_new and bs_top. Both bs_new and bs_top are modified.
1565 * bs_new is required to be anonymous.
1567 * This function does not create any image files.
1569 void bdrv_append(BlockDriverState *bs_new, BlockDriverState *bs_top)
1571 bdrv_swap(bs_new, bs_top);
1573 /* The contents of 'tmp' will become bs_top, as we are
1574 * swapping bs_new and bs_top contents. */
1575 bs_top->backing_hd = bs_new;
1576 bs_top->open_flags &= ~BDRV_O_NO_BACKING;
1577 pstrcpy(bs_top->backing_file, sizeof(bs_top->backing_file),
1578 bs_new->filename);
1579 pstrcpy(bs_top->backing_format, sizeof(bs_top->backing_format),
1580 bs_new->drv ? bs_new->drv->format_name : "");
1583 void bdrv_delete(BlockDriverState *bs)
1585 assert(!bs->dev);
1586 assert(!bs->job);
1587 assert(!bs->in_use);
1589 /* remove from list, if necessary */
1590 bdrv_make_anon(bs);
1592 bdrv_close(bs);
1594 assert(bs != bs_snapshots);
1595 g_free(bs);
1598 int bdrv_attach_dev(BlockDriverState *bs, void *dev)
1599 /* TODO change to DeviceState *dev when all users are qdevified */
1601 if (bs->dev) {
1602 return -EBUSY;
1604 bs->dev = dev;
1605 bdrv_iostatus_reset(bs);
1606 return 0;
1609 /* TODO qdevified devices don't use this, remove when devices are qdevified */
1610 void bdrv_attach_dev_nofail(BlockDriverState *bs, void *dev)
1612 if (bdrv_attach_dev(bs, dev) < 0) {
1613 abort();
1617 void bdrv_detach_dev(BlockDriverState *bs, void *dev)
1618 /* TODO change to DeviceState *dev when all users are qdevified */
1620 assert(bs->dev == dev);
1621 bs->dev = NULL;
1622 bs->dev_ops = NULL;
1623 bs->dev_opaque = NULL;
1624 bs->buffer_alignment = 512;
1627 /* TODO change to return DeviceState * when all users are qdevified */
1628 void *bdrv_get_attached_dev(BlockDriverState *bs)
1630 return bs->dev;
1633 void bdrv_set_dev_ops(BlockDriverState *bs, const BlockDevOps *ops,
1634 void *opaque)
1636 bs->dev_ops = ops;
1637 bs->dev_opaque = opaque;
1638 if (bdrv_dev_has_removable_media(bs) && bs == bs_snapshots) {
1639 bs_snapshots = NULL;
1643 void bdrv_emit_qmp_error_event(const BlockDriverState *bdrv,
1644 enum MonitorEvent ev,
1645 BlockErrorAction action, bool is_read)
1647 QObject *data;
1648 const char *action_str;
1650 switch (action) {
1651 case BDRV_ACTION_REPORT:
1652 action_str = "report";
1653 break;
1654 case BDRV_ACTION_IGNORE:
1655 action_str = "ignore";
1656 break;
1657 case BDRV_ACTION_STOP:
1658 action_str = "stop";
1659 break;
1660 default:
1661 abort();
1664 data = qobject_from_jsonf("{ 'device': %s, 'action': %s, 'operation': %s }",
1665 bdrv->device_name,
1666 action_str,
1667 is_read ? "read" : "write");
1668 monitor_protocol_event(ev, data);
1670 qobject_decref(data);
1673 static void bdrv_emit_qmp_eject_event(BlockDriverState *bs, bool ejected)
1675 QObject *data;
1677 data = qobject_from_jsonf("{ 'device': %s, 'tray-open': %i }",
1678 bdrv_get_device_name(bs), ejected);
1679 monitor_protocol_event(QEVENT_DEVICE_TRAY_MOVED, data);
1681 qobject_decref(data);
1684 static void bdrv_dev_change_media_cb(BlockDriverState *bs, bool load)
1686 if (bs->dev_ops && bs->dev_ops->change_media_cb) {
1687 bool tray_was_closed = !bdrv_dev_is_tray_open(bs);
1688 bs->dev_ops->change_media_cb(bs->dev_opaque, load);
1689 if (tray_was_closed) {
1690 /* tray open */
1691 bdrv_emit_qmp_eject_event(bs, true);
1693 if (load) {
1694 /* tray close */
1695 bdrv_emit_qmp_eject_event(bs, false);
1700 bool bdrv_dev_has_removable_media(BlockDriverState *bs)
1702 return !bs->dev || (bs->dev_ops && bs->dev_ops->change_media_cb);
1705 void bdrv_dev_eject_request(BlockDriverState *bs, bool force)
1707 if (bs->dev_ops && bs->dev_ops->eject_request_cb) {
1708 bs->dev_ops->eject_request_cb(bs->dev_opaque, force);
1712 bool bdrv_dev_is_tray_open(BlockDriverState *bs)
1714 if (bs->dev_ops && bs->dev_ops->is_tray_open) {
1715 return bs->dev_ops->is_tray_open(bs->dev_opaque);
1717 return false;
1720 static void bdrv_dev_resize_cb(BlockDriverState *bs)
1722 if (bs->dev_ops && bs->dev_ops->resize_cb) {
1723 bs->dev_ops->resize_cb(bs->dev_opaque);
1727 bool bdrv_dev_is_medium_locked(BlockDriverState *bs)
1729 if (bs->dev_ops && bs->dev_ops->is_medium_locked) {
1730 return bs->dev_ops->is_medium_locked(bs->dev_opaque);
1732 return false;
1736 * Run consistency checks on an image
1738 * Returns 0 if the check could be completed (it doesn't mean that the image is
1739 * free of errors) or -errno when an internal error occurred. The results of the
1740 * check are stored in res.
1742 int bdrv_check(BlockDriverState *bs, BdrvCheckResult *res, BdrvCheckMode fix)
1744 if (bs->drv->bdrv_check == NULL) {
1745 return -ENOTSUP;
1748 memset(res, 0, sizeof(*res));
1749 return bs->drv->bdrv_check(bs, res, fix);
1752 #define COMMIT_BUF_SECTORS 2048
1754 /* commit COW file into the raw image */
1755 int bdrv_commit(BlockDriverState *bs)
1757 BlockDriver *drv = bs->drv;
1758 int64_t sector, total_sectors;
1759 int n, ro, open_flags;
1760 int ret = 0;
1761 uint8_t *buf;
1762 char filename[PATH_MAX];
1764 if (!drv)
1765 return -ENOMEDIUM;
1767 if (!bs->backing_hd) {
1768 return -ENOTSUP;
1771 if (bdrv_in_use(bs) || bdrv_in_use(bs->backing_hd)) {
1772 return -EBUSY;
1775 ro = bs->backing_hd->read_only;
1776 /* Use pstrcpy (not strncpy): filename must be NUL-terminated. */
1777 pstrcpy(filename, sizeof(filename), bs->backing_hd->filename);
1778 open_flags = bs->backing_hd->open_flags;
1780 if (ro) {
1781 if (bdrv_reopen(bs->backing_hd, open_flags | BDRV_O_RDWR, NULL)) {
1782 return -EACCES;
1786 total_sectors = bdrv_getlength(bs) >> BDRV_SECTOR_BITS;
1787 buf = g_malloc(COMMIT_BUF_SECTORS * BDRV_SECTOR_SIZE);
1789 for (sector = 0; sector < total_sectors; sector += n) {
1790 if (bdrv_is_allocated(bs, sector, COMMIT_BUF_SECTORS, &n)) {
1792 if (bdrv_read(bs, sector, buf, n) != 0) {
1793 ret = -EIO;
1794 goto ro_cleanup;
1797 if (bdrv_write(bs->backing_hd, sector, buf, n) != 0) {
1798 ret = -EIO;
1799 goto ro_cleanup;
1804 if (drv->bdrv_make_empty) {
1805 ret = drv->bdrv_make_empty(bs);
1806 bdrv_flush(bs);
1810 * Make sure all data we wrote to the backing device is actually
1811 * stable on disk.
1813 if (bs->backing_hd)
1814 bdrv_flush(bs->backing_hd);
1816 ro_cleanup:
1817 g_free(buf);
1819 if (ro) {
1820 /* ignoring error return here */
1821 bdrv_reopen(bs->backing_hd, open_flags & ~BDRV_O_RDWR, NULL);
1824 return ret;
1827 int bdrv_commit_all(void)
1829 BlockDriverState *bs;
1831 QTAILQ_FOREACH(bs, &bdrv_states, list) {
1832 if (bs->drv && bs->backing_hd) {
1833 int ret = bdrv_commit(bs);
1834 if (ret < 0) {
1835 return ret;
1839 return 0;
1842 struct BdrvTrackedRequest {
1843 BlockDriverState *bs;
1844 int64_t sector_num;
1845 int nb_sectors;
1846 bool is_write;
1847 QLIST_ENTRY(BdrvTrackedRequest) list;
1848 Coroutine *co; /* owner, used for deadlock detection */
1849 CoQueue wait_queue; /* coroutines blocked on this request */
1853 * Remove an active request from the tracked requests list
1855 * This function should be called when a tracked request is completing.
1857 static void tracked_request_end(BdrvTrackedRequest *req)
1859 QLIST_REMOVE(req, list);
1860 qemu_co_queue_restart_all(&req->wait_queue);
1864 * Add an active request to the tracked requests list
1866 static void tracked_request_begin(BdrvTrackedRequest *req,
1867 BlockDriverState *bs,
1868 int64_t sector_num,
1869 int nb_sectors, bool is_write)
1871 *req = (BdrvTrackedRequest){
1872 .bs = bs,
1873 .sector_num = sector_num,
1874 .nb_sectors = nb_sectors,
1875 .is_write = is_write,
1876 .co = qemu_coroutine_self(),
1879 qemu_co_queue_init(&req->wait_queue);
1881 QLIST_INSERT_HEAD(&bs->tracked_requests, req, list);
1885 * Round a region to cluster boundaries
1887 void bdrv_round_to_clusters(BlockDriverState *bs,
1888 int64_t sector_num, int nb_sectors,
1889 int64_t *cluster_sector_num,
1890 int *cluster_nb_sectors)
1892 BlockDriverInfo bdi;
1894 if (bdrv_get_info(bs, &bdi) < 0 || bdi.cluster_size == 0) {
1895 *cluster_sector_num = sector_num;
1896 *cluster_nb_sectors = nb_sectors;
1897 } else {
1898 int64_t c = bdi.cluster_size / BDRV_SECTOR_SIZE;
1899 *cluster_sector_num = QEMU_ALIGN_DOWN(sector_num, c);
1900 *cluster_nb_sectors = QEMU_ALIGN_UP(sector_num - *cluster_sector_num +
1901 nb_sectors, c);
1905 static bool tracked_request_overlaps(BdrvTrackedRequest *req,
1906 int64_t sector_num, int nb_sectors) {
1907 /* aaaa bbbb */
1908 if (sector_num >= req->sector_num + req->nb_sectors) {
1909 return false;
1911 /* bbbb aaaa */
1912 if (req->sector_num >= sector_num + nb_sectors) {
1913 return false;
1915 return true;
1918 static void coroutine_fn wait_for_overlapping_requests(BlockDriverState *bs,
1919 int64_t sector_num, int nb_sectors)
1921 BdrvTrackedRequest *req;
1922 int64_t cluster_sector_num;
1923 int cluster_nb_sectors;
1924 bool retry;
1926 /* If we touch the same cluster it counts as an overlap. This guarantees
1927 * that allocating writes will be serialized and not race with each other
1928 * for the same cluster. For example, in copy-on-read it ensures that the
1929 * CoR read and write operations are atomic and guest writes cannot
1930 * interleave between them.
1932 bdrv_round_to_clusters(bs, sector_num, nb_sectors,
1933 &cluster_sector_num, &cluster_nb_sectors);
1935 do {
1936 retry = false;
1937 QLIST_FOREACH(req, &bs->tracked_requests, list) {
1938 if (tracked_request_overlaps(req, cluster_sector_num,
1939 cluster_nb_sectors)) {
1940 /* Hitting this means there was a reentrant request, for
1941 * example, a block driver issuing nested requests. This must
1942 * never happen since it means deadlock.
1944 assert(qemu_coroutine_self() != req->co);
1946 qemu_co_queue_wait(&req->wait_queue);
1947 retry = true;
1948 break;
1951 } while (retry);
1955 * Return values:
1956 * 0 - success
1957 * -EINVAL - backing format specified, but no file
1958 * -ENOSPC - can't update the backing file because no space is left in the
1959 * image file header
1960 * -ENOTSUP - format driver doesn't support changing the backing file
1962 int bdrv_change_backing_file(BlockDriverState *bs,
1963 const char *backing_file, const char *backing_fmt)
1965 BlockDriver *drv = bs->drv;
1966 int ret;
1968 /* Backing file format doesn't make sense without a backing file */
1969 if (backing_fmt && !backing_file) {
1970 return -EINVAL;
1973 if (drv->bdrv_change_backing_file != NULL) {
1974 ret = drv->bdrv_change_backing_file(bs, backing_file, backing_fmt);
1975 } else {
1976 ret = -ENOTSUP;
1979 if (ret == 0) {
1980 pstrcpy(bs->backing_file, sizeof(bs->backing_file), backing_file ?: "");
1981 pstrcpy(bs->backing_format, sizeof(bs->backing_format), backing_fmt ?: "");
1983 return ret;
1987 * Finds the image layer in the chain that has 'bs' as its backing file.
1989 * active is the current topmost image.
1991 * Returns NULL if bs is not found in active's image chain,
1992 * or if active == bs.
1994 BlockDriverState *bdrv_find_overlay(BlockDriverState *active,
1995 BlockDriverState *bs)
1997 BlockDriverState *overlay = NULL;
1998 BlockDriverState *intermediate;
2000 assert(active != NULL);
2001 assert(bs != NULL);
2003 /* if bs is the same as active, then by definition it has no overlay
2005 if (active == bs) {
2006 return NULL;
2009 intermediate = active;
2010 while (intermediate->backing_hd) {
2011 if (intermediate->backing_hd == bs) {
2012 overlay = intermediate;
2013 break;
2015 intermediate = intermediate->backing_hd;
2018 return overlay;
2021 typedef struct BlkIntermediateStates {
2022 BlockDriverState *bs;
2023 QSIMPLEQ_ENTRY(BlkIntermediateStates) entry;
2024 } BlkIntermediateStates;
2028 * Drops images above 'base' up to and including 'top', and sets the image
2029 * above 'top' to have base as its backing file.
2031 * Requires that the overlay to 'top' is opened r/w, so that the backing file
2032 * information in 'bs' can be properly updated.
2034 * E.g., this will convert the following chain:
2035 * bottom <- base <- intermediate <- top <- active
2037 * to
2039 * bottom <- base <- active
2041 * It is allowed for bottom==base, in which case it converts:
2043 * base <- intermediate <- top <- active
2045 * to
2047 * base <- active
2049 * Error conditions:
2050 * if active == top, that is considered an error
2053 int bdrv_drop_intermediate(BlockDriverState *active, BlockDriverState *top,
2054 BlockDriverState *base)
2056 BlockDriverState *intermediate;
2057 BlockDriverState *base_bs = NULL;
2058 BlockDriverState *new_top_bs = NULL;
2059 BlkIntermediateStates *intermediate_state, *next;
2060 int ret = -EIO;
2062 QSIMPLEQ_HEAD(states_to_delete, BlkIntermediateStates) states_to_delete;
2063 QSIMPLEQ_INIT(&states_to_delete);
2065 if (!top->drv || !base->drv) {
2066 goto exit;
2069 new_top_bs = bdrv_find_overlay(active, top);
2071 if (new_top_bs == NULL) {
2072 /* we could not find the image above 'top', this is an error */
2073 goto exit;
2076 /* special case of new_top_bs->backing_hd already pointing to base - nothing
2077 * to do, no intermediate images */
2078 if (new_top_bs->backing_hd == base) {
2079 ret = 0;
2080 goto exit;
2083 intermediate = top;
2085 /* now we will go down through the list, and add each BDS we find
2086 * into our deletion queue, until we hit the 'base'
2088 while (intermediate) {
2089 intermediate_state = g_malloc0(sizeof(BlkIntermediateStates));
2090 intermediate_state->bs = intermediate;
2091 QSIMPLEQ_INSERT_TAIL(&states_to_delete, intermediate_state, entry);
2093 if (intermediate->backing_hd == base) {
2094 base_bs = intermediate->backing_hd;
2095 break;
2097 intermediate = intermediate->backing_hd;
2099 if (base_bs == NULL) {
2100 /* something went wrong, we did not end at the base. safely
2101 * unravel everything, and exit with error */
2102 goto exit;
2105 /* success - we can delete the intermediate states, and link top->base */
2106 ret = bdrv_change_backing_file(new_top_bs, base_bs->filename,
2107 base_bs->drv ? base_bs->drv->format_name : "");
2108 if (ret) {
2109 goto exit;
2111 new_top_bs->backing_hd = base_bs;
2114 QSIMPLEQ_FOREACH_SAFE(intermediate_state, &states_to_delete, entry, next) {
2115 /* so that bdrv_close() does not recursively close the chain */
2116 intermediate_state->bs->backing_hd = NULL;
2117 bdrv_delete(intermediate_state->bs);
2119 ret = 0;
2121 exit:
2122 QSIMPLEQ_FOREACH_SAFE(intermediate_state, &states_to_delete, entry, next) {
2123 g_free(intermediate_state);
2125 return ret;
2129 static int bdrv_check_byte_request(BlockDriverState *bs, int64_t offset,
2130 size_t size)
2132 int64_t len;
2134 if (!bdrv_is_inserted(bs))
2135 return -ENOMEDIUM;
2137 if (bs->growable)
2138 return 0;
2140 len = bdrv_getlength(bs);
2142 if (offset < 0)
2143 return -EIO;
2145 if ((offset > len) || (len - offset < size))
2146 return -EIO;
2148 return 0;
2151 static int bdrv_check_request(BlockDriverState *bs, int64_t sector_num,
2152 int nb_sectors)
2154 return bdrv_check_byte_request(bs, sector_num * BDRV_SECTOR_SIZE,
2155 nb_sectors * BDRV_SECTOR_SIZE);
2158 typedef struct RwCo {
2159 BlockDriverState *bs;
2160 int64_t sector_num;
2161 int nb_sectors;
2162 QEMUIOVector *qiov;
2163 bool is_write;
2164 int ret;
2165 } RwCo;
2167 static void coroutine_fn bdrv_rw_co_entry(void *opaque)
2169 RwCo *rwco = opaque;
2171 if (!rwco->is_write) {
2172 rwco->ret = bdrv_co_do_readv(rwco->bs, rwco->sector_num,
2173 rwco->nb_sectors, rwco->qiov, 0);
2174 } else {
2175 rwco->ret = bdrv_co_do_writev(rwco->bs, rwco->sector_num,
2176 rwco->nb_sectors, rwco->qiov, 0);
2181 * Process a vectored synchronous request using coroutines
2183 static int bdrv_rwv_co(BlockDriverState *bs, int64_t sector_num,
2184 QEMUIOVector *qiov, bool is_write)
2186 Coroutine *co;
2187 RwCo rwco = {
2188 .bs = bs,
2189 .sector_num = sector_num,
2190 .nb_sectors = qiov->size >> BDRV_SECTOR_BITS,
2191 .qiov = qiov,
2192 .is_write = is_write,
2193 .ret = NOT_DONE,
2195 assert((qiov->size & (BDRV_SECTOR_SIZE - 1)) == 0);
2198 * In sync call context, when the vcpu is blocked, this throttling timer
2199 * will not fire; so the I/O throttling function has to be disabled here
2200 * if it has been enabled.
2202 if (bs->io_limits_enabled) {
2203 fprintf(stderr, "Disabling I/O throttling on '%s' due "
2204 "to synchronous I/O.\n", bdrv_get_device_name(bs));
2205 bdrv_io_limits_disable(bs);
2208 if (qemu_in_coroutine()) {
2209 /* Fast-path if already in coroutine context */
2210 bdrv_rw_co_entry(&rwco);
2211 } else {
2212 co = qemu_coroutine_create(bdrv_rw_co_entry);
2213 qemu_coroutine_enter(co, &rwco);
2214 while (rwco.ret == NOT_DONE) {
2215 qemu_aio_wait();
2218 return rwco.ret;
2222 * Process a synchronous request using coroutines
2224 static int bdrv_rw_co(BlockDriverState *bs, int64_t sector_num, uint8_t *buf,
2225 int nb_sectors, bool is_write)
2227 QEMUIOVector qiov;
2228 struct iovec iov = {
2229 .iov_base = (void *)buf,
2230 .iov_len = nb_sectors * BDRV_SECTOR_SIZE,
2233 qemu_iovec_init_external(&qiov, &iov, 1);
2234 return bdrv_rwv_co(bs, sector_num, &qiov, is_write);
2237 /* return < 0 if error. See bdrv_write() for the return codes */
2238 int bdrv_read(BlockDriverState *bs, int64_t sector_num,
2239 uint8_t *buf, int nb_sectors)
2241 return bdrv_rw_co(bs, sector_num, buf, nb_sectors, false);
2244 /* Just like bdrv_read(), but with I/O throttling temporarily disabled */
2245 int bdrv_read_unthrottled(BlockDriverState *bs, int64_t sector_num,
2246 uint8_t *buf, int nb_sectors)
2248 bool enabled;
2249 int ret;
2251 enabled = bs->io_limits_enabled;
2252 bs->io_limits_enabled = false;
2253 ret = bdrv_read(bs, 0, buf, 1);
2254 bs->io_limits_enabled = enabled;
2255 return ret;
2258 /* Return < 0 if error. Important errors are:
2259 -EIO generic I/O error (may happen for all errors)
2260 -ENOMEDIUM No media inserted.
2261 -EINVAL Invalid sector number or nb_sectors
2262 -EACCES Trying to write a read-only device
2264 int bdrv_write(BlockDriverState *bs, int64_t sector_num,
2265 const uint8_t *buf, int nb_sectors)
2267 return bdrv_rw_co(bs, sector_num, (uint8_t *)buf, nb_sectors, true);
2270 int bdrv_writev(BlockDriverState *bs, int64_t sector_num, QEMUIOVector *qiov)
2272 return bdrv_rwv_co(bs, sector_num, qiov, true);
2275 int bdrv_pread(BlockDriverState *bs, int64_t offset,
2276 void *buf, int count1)
2278 uint8_t tmp_buf[BDRV_SECTOR_SIZE];
2279 int len, nb_sectors, count;
2280 int64_t sector_num;
2281 int ret;
2283 count = count1;
2284 /* first read to align to sector start */
2285 len = (BDRV_SECTOR_SIZE - offset) & (BDRV_SECTOR_SIZE - 1);
2286 if (len > count)
2287 len = count;
2288 sector_num = offset >> BDRV_SECTOR_BITS;
2289 if (len > 0) {
2290 if ((ret = bdrv_read(bs, sector_num, tmp_buf, 1)) < 0)
2291 return ret;
2292 memcpy(buf, tmp_buf + (offset & (BDRV_SECTOR_SIZE - 1)), len);
2293 count -= len;
2294 if (count == 0)
2295 return count1;
2296 sector_num++;
2297 buf += len;
2300 /* read the sectors "in place" */
2301 nb_sectors = count >> BDRV_SECTOR_BITS;
2302 if (nb_sectors > 0) {
2303 if ((ret = bdrv_read(bs, sector_num, buf, nb_sectors)) < 0)
2304 return ret;
2305 sector_num += nb_sectors;
2306 len = nb_sectors << BDRV_SECTOR_BITS;
2307 buf += len;
2308 count -= len;
2311 /* add data from the last sector */
2312 if (count > 0) {
2313 if ((ret = bdrv_read(bs, sector_num, tmp_buf, 1)) < 0)
2314 return ret;
2315 memcpy(buf, tmp_buf, count);
2317 return count1;
2320 int bdrv_pwritev(BlockDriverState *bs, int64_t offset, QEMUIOVector *qiov)
2322 uint8_t tmp_buf[BDRV_SECTOR_SIZE];
2323 int len, nb_sectors, count;
2324 int64_t sector_num;
2325 int ret;
2327 count = qiov->size;
2329 /* first write to align to sector start */
2330 len = (BDRV_SECTOR_SIZE - offset) & (BDRV_SECTOR_SIZE - 1);
2331 if (len > count)
2332 len = count;
2333 sector_num = offset >> BDRV_SECTOR_BITS;
2334 if (len > 0) {
2335 if ((ret = bdrv_read(bs, sector_num, tmp_buf, 1)) < 0)
2336 return ret;
2337 qemu_iovec_to_buf(qiov, 0, tmp_buf + (offset & (BDRV_SECTOR_SIZE - 1)),
2338 len);
2339 if ((ret = bdrv_write(bs, sector_num, tmp_buf, 1)) < 0)
2340 return ret;
2341 count -= len;
2342 if (count == 0)
2343 return qiov->size;
2344 sector_num++;
2347 /* write the sectors "in place" */
2348 nb_sectors = count >> BDRV_SECTOR_BITS;
2349 if (nb_sectors > 0) {
2350 QEMUIOVector qiov_inplace;
2352 qemu_iovec_init(&qiov_inplace, qiov->niov);
2353 qemu_iovec_concat(&qiov_inplace, qiov, len,
2354 nb_sectors << BDRV_SECTOR_BITS);
2355 ret = bdrv_writev(bs, sector_num, &qiov_inplace);
2356 qemu_iovec_destroy(&qiov_inplace);
2357 if (ret < 0) {
2358 return ret;
2361 sector_num += nb_sectors;
2362 len = nb_sectors << BDRV_SECTOR_BITS;
2363 count -= len;
2366 /* add data from the last sector */
2367 if (count > 0) {
2368 if ((ret = bdrv_read(bs, sector_num, tmp_buf, 1)) < 0)
2369 return ret;
2370 qemu_iovec_to_buf(qiov, qiov->size - count, tmp_buf, count);
2371 if ((ret = bdrv_write(bs, sector_num, tmp_buf, 1)) < 0)
2372 return ret;
2374 return qiov->size;
2377 int bdrv_pwrite(BlockDriverState *bs, int64_t offset,
2378 const void *buf, int count1)
2380 QEMUIOVector qiov;
2381 struct iovec iov = {
2382 .iov_base = (void *) buf,
2383 .iov_len = count1,
2386 qemu_iovec_init_external(&qiov, &iov, 1);
2387 return bdrv_pwritev(bs, offset, &qiov);
2391 * Writes to the file and ensures that no writes are reordered across this
2392 * request (acts as a barrier)
2394 * Returns 0 on success, -errno in error cases.
2396 int bdrv_pwrite_sync(BlockDriverState *bs, int64_t offset,
2397 const void *buf, int count)
2399 int ret;
2401 ret = bdrv_pwrite(bs, offset, buf, count);
2402 if (ret < 0) {
2403 return ret;
2406 /* No flush needed for cache modes that already do it */
2407 if (bs->enable_write_cache) {
2408 bdrv_flush(bs);
2411 return 0;
2414 static int coroutine_fn bdrv_co_do_copy_on_readv(BlockDriverState *bs,
2415 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov)
2417 /* Perform I/O through a temporary buffer so that users who scribble over
2418 * their read buffer while the operation is in progress do not end up
2419 * modifying the image file. This is critical for zero-copy guest I/O
2420 * where anything might happen inside guest memory.
2422 void *bounce_buffer;
2424 BlockDriver *drv = bs->drv;
2425 struct iovec iov;
2426 QEMUIOVector bounce_qiov;
2427 int64_t cluster_sector_num;
2428 int cluster_nb_sectors;
2429 size_t skip_bytes;
2430 int ret;
2432 /* Cover entire cluster so no additional backing file I/O is required when
2433 * allocating cluster in the image file.
2435 bdrv_round_to_clusters(bs, sector_num, nb_sectors,
2436 &cluster_sector_num, &cluster_nb_sectors);
2438 trace_bdrv_co_do_copy_on_readv(bs, sector_num, nb_sectors,
2439 cluster_sector_num, cluster_nb_sectors);
2441 iov.iov_len = cluster_nb_sectors * BDRV_SECTOR_SIZE;
2442 iov.iov_base = bounce_buffer = qemu_blockalign(bs, iov.iov_len);
2443 qemu_iovec_init_external(&bounce_qiov, &iov, 1);
2445 ret = drv->bdrv_co_readv(bs, cluster_sector_num, cluster_nb_sectors,
2446 &bounce_qiov);
2447 if (ret < 0) {
2448 goto err;
2451 if (drv->bdrv_co_write_zeroes &&
2452 buffer_is_zero(bounce_buffer, iov.iov_len)) {
2453 ret = bdrv_co_do_write_zeroes(bs, cluster_sector_num,
2454 cluster_nb_sectors);
2455 } else {
2456 /* This does not change the data on the disk, it is not necessary
2457 * to flush even in cache=writethrough mode.
2459 ret = drv->bdrv_co_writev(bs, cluster_sector_num, cluster_nb_sectors,
2460 &bounce_qiov);
2463 if (ret < 0) {
2464 /* It might be okay to ignore write errors for guest requests. If this
2465 * is a deliberate copy-on-read then we don't want to ignore the error.
2466 * Simply report it in all cases.
2468 goto err;
2471 skip_bytes = (sector_num - cluster_sector_num) * BDRV_SECTOR_SIZE;
2472 qemu_iovec_from_buf(qiov, 0, bounce_buffer + skip_bytes,
2473 nb_sectors * BDRV_SECTOR_SIZE);
2475 err:
2476 qemu_vfree(bounce_buffer);
2477 return ret;
2481 * Handle a read request in coroutine context
2483 static int coroutine_fn bdrv_co_do_readv(BlockDriverState *bs,
2484 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov,
2485 BdrvRequestFlags flags)
2487 BlockDriver *drv = bs->drv;
2488 BdrvTrackedRequest req;
2489 int ret;
2491 if (!drv) {
2492 return -ENOMEDIUM;
2494 if (bdrv_check_request(bs, sector_num, nb_sectors)) {
2495 return -EIO;
2498 /* throttling disk read I/O */
2499 if (bs->io_limits_enabled) {
2500 bdrv_io_limits_intercept(bs, false, nb_sectors);
2503 if (bs->copy_on_read) {
2504 flags |= BDRV_REQ_COPY_ON_READ;
2506 if (flags & BDRV_REQ_COPY_ON_READ) {
2507 bs->copy_on_read_in_flight++;
2510 if (bs->copy_on_read_in_flight) {
2511 wait_for_overlapping_requests(bs, sector_num, nb_sectors);
2514 tracked_request_begin(&req, bs, sector_num, nb_sectors, false);
2516 if (flags & BDRV_REQ_COPY_ON_READ) {
2517 int pnum;
2519 ret = bdrv_co_is_allocated(bs, sector_num, nb_sectors, &pnum);
2520 if (ret < 0) {
2521 goto out;
2524 if (!ret || pnum != nb_sectors) {
2525 ret = bdrv_co_do_copy_on_readv(bs, sector_num, nb_sectors, qiov);
2526 goto out;
2530 ret = drv->bdrv_co_readv(bs, sector_num, nb_sectors, qiov);
2532 out:
2533 tracked_request_end(&req);
2535 if (flags & BDRV_REQ_COPY_ON_READ) {
2536 bs->copy_on_read_in_flight--;
2539 return ret;
2542 int coroutine_fn bdrv_co_readv(BlockDriverState *bs, int64_t sector_num,
2543 int nb_sectors, QEMUIOVector *qiov)
2545 trace_bdrv_co_readv(bs, sector_num, nb_sectors);
2547 return bdrv_co_do_readv(bs, sector_num, nb_sectors, qiov, 0);
2550 int coroutine_fn bdrv_co_copy_on_readv(BlockDriverState *bs,
2551 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov)
2553 trace_bdrv_co_copy_on_readv(bs, sector_num, nb_sectors);
2555 return bdrv_co_do_readv(bs, sector_num, nb_sectors, qiov,
2556 BDRV_REQ_COPY_ON_READ);
2559 static int coroutine_fn bdrv_co_do_write_zeroes(BlockDriverState *bs,
2560 int64_t sector_num, int nb_sectors)
2562 BlockDriver *drv = bs->drv;
2563 QEMUIOVector qiov;
2564 struct iovec iov;
2565 int ret;
2567 /* TODO Emulate only part of misaligned requests instead of letting block
2568 * drivers return -ENOTSUP and emulate everything */
2570 /* First try the efficient write zeroes operation */
2571 if (drv->bdrv_co_write_zeroes) {
2572 ret = drv->bdrv_co_write_zeroes(bs, sector_num, nb_sectors);
2573 if (ret != -ENOTSUP) {
2574 return ret;
2578 /* Fall back to bounce buffer if write zeroes is unsupported */
2579 iov.iov_len = nb_sectors * BDRV_SECTOR_SIZE;
2580 iov.iov_base = qemu_blockalign(bs, iov.iov_len);
2581 memset(iov.iov_base, 0, iov.iov_len);
2582 qemu_iovec_init_external(&qiov, &iov, 1);
2584 ret = drv->bdrv_co_writev(bs, sector_num, nb_sectors, &qiov);
2586 qemu_vfree(iov.iov_base);
2587 return ret;
2591 * Handle a write request in coroutine context
2593 static int coroutine_fn bdrv_co_do_writev(BlockDriverState *bs,
2594 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov,
2595 BdrvRequestFlags flags)
2597 BlockDriver *drv = bs->drv;
2598 BdrvTrackedRequest req;
2599 int ret;
2601 if (!bs->drv) {
2602 return -ENOMEDIUM;
2604 if (bs->read_only) {
2605 return -EACCES;
2607 if (bdrv_check_request(bs, sector_num, nb_sectors)) {
2608 return -EIO;
2611 /* throttling disk write I/O */
2612 if (bs->io_limits_enabled) {
2613 bdrv_io_limits_intercept(bs, true, nb_sectors);
2616 if (bs->copy_on_read_in_flight) {
2617 wait_for_overlapping_requests(bs, sector_num, nb_sectors);
2620 tracked_request_begin(&req, bs, sector_num, nb_sectors, true);
2622 if (flags & BDRV_REQ_ZERO_WRITE) {
2623 ret = bdrv_co_do_write_zeroes(bs, sector_num, nb_sectors);
2624 } else {
2625 ret = drv->bdrv_co_writev(bs, sector_num, nb_sectors, qiov);
2628 if (ret == 0 && !bs->enable_write_cache) {
2629 ret = bdrv_co_flush(bs);
2632 if (bs->dirty_bitmap) {
2633 bdrv_set_dirty(bs, sector_num, nb_sectors);
2636 if (bs->wr_highest_sector < sector_num + nb_sectors - 1) {
2637 bs->wr_highest_sector = sector_num + nb_sectors - 1;
2640 tracked_request_end(&req);
2642 return ret;
2645 int coroutine_fn bdrv_co_writev(BlockDriverState *bs, int64_t sector_num,
2646 int nb_sectors, QEMUIOVector *qiov)
2648 trace_bdrv_co_writev(bs, sector_num, nb_sectors);
2650 return bdrv_co_do_writev(bs, sector_num, nb_sectors, qiov, 0);
2653 int coroutine_fn bdrv_co_write_zeroes(BlockDriverState *bs,
2654 int64_t sector_num, int nb_sectors)
2656 trace_bdrv_co_write_zeroes(bs, sector_num, nb_sectors);
2658 return bdrv_co_do_writev(bs, sector_num, nb_sectors, NULL,
2659 BDRV_REQ_ZERO_WRITE);
2663 * Truncate file to 'offset' bytes (needed only for file protocols)
2665 int bdrv_truncate(BlockDriverState *bs, int64_t offset)
2667 BlockDriver *drv = bs->drv;
2668 int ret;
2669 if (!drv)
2670 return -ENOMEDIUM;
2671 if (!drv->bdrv_truncate)
2672 return -ENOTSUP;
2673 if (bs->read_only)
2674 return -EACCES;
2675 if (bdrv_in_use(bs))
2676 return -EBUSY;
2677 ret = drv->bdrv_truncate(bs, offset);
2678 if (ret == 0) {
2679 ret = refresh_total_sectors(bs, offset >> BDRV_SECTOR_BITS);
2680 bdrv_dev_resize_cb(bs);
2682 return ret;
2686 * Length of a allocated file in bytes. Sparse files are counted by actual
2687 * allocated space. Return < 0 if error or unknown.
2689 int64_t bdrv_get_allocated_file_size(BlockDriverState *bs)
2691 BlockDriver *drv = bs->drv;
2692 if (!drv) {
2693 return -ENOMEDIUM;
2695 if (drv->bdrv_get_allocated_file_size) {
2696 return drv->bdrv_get_allocated_file_size(bs);
2698 if (bs->file) {
2699 return bdrv_get_allocated_file_size(bs->file);
2701 return -ENOTSUP;
2705 * Length of a file in bytes. Return < 0 if error or unknown.
2707 int64_t bdrv_getlength(BlockDriverState *bs)
2709 BlockDriver *drv = bs->drv;
2710 if (!drv)
2711 return -ENOMEDIUM;
2713 if (bs->growable || bdrv_dev_has_removable_media(bs)) {
2714 if (drv->bdrv_getlength) {
2715 return drv->bdrv_getlength(bs);
2718 return bs->total_sectors * BDRV_SECTOR_SIZE;
2721 /* return 0 as number of sectors if no device present or error */
2722 void bdrv_get_geometry(BlockDriverState *bs, uint64_t *nb_sectors_ptr)
2724 int64_t length;
2725 length = bdrv_getlength(bs);
2726 if (length < 0)
2727 length = 0;
2728 else
2729 length = length >> BDRV_SECTOR_BITS;
2730 *nb_sectors_ptr = length;
2733 /* throttling disk io limits */
2734 void bdrv_set_io_limits(BlockDriverState *bs,
2735 BlockIOLimit *io_limits)
2737 bs->io_limits = *io_limits;
2738 bs->io_limits_enabled = bdrv_io_limits_enabled(bs);
2741 void bdrv_set_on_error(BlockDriverState *bs, BlockdevOnError on_read_error,
2742 BlockdevOnError on_write_error)
2744 bs->on_read_error = on_read_error;
2745 bs->on_write_error = on_write_error;
2748 BlockdevOnError bdrv_get_on_error(BlockDriverState *bs, bool is_read)
2750 return is_read ? bs->on_read_error : bs->on_write_error;
2753 BlockErrorAction bdrv_get_error_action(BlockDriverState *bs, bool is_read, int error)
2755 BlockdevOnError on_err = is_read ? bs->on_read_error : bs->on_write_error;
2757 switch (on_err) {
2758 case BLOCKDEV_ON_ERROR_ENOSPC:
2759 return (error == ENOSPC) ? BDRV_ACTION_STOP : BDRV_ACTION_REPORT;
2760 case BLOCKDEV_ON_ERROR_STOP:
2761 return BDRV_ACTION_STOP;
2762 case BLOCKDEV_ON_ERROR_REPORT:
2763 return BDRV_ACTION_REPORT;
2764 case BLOCKDEV_ON_ERROR_IGNORE:
2765 return BDRV_ACTION_IGNORE;
2766 default:
2767 abort();
2771 /* This is done by device models because, while the block layer knows
2772 * about the error, it does not know whether an operation comes from
2773 * the device or the block layer (from a job, for example).
2775 void bdrv_error_action(BlockDriverState *bs, BlockErrorAction action,
2776 bool is_read, int error)
2778 assert(error >= 0);
2779 bdrv_emit_qmp_error_event(bs, QEVENT_BLOCK_IO_ERROR, action, is_read);
2780 if (action == BDRV_ACTION_STOP) {
2781 vm_stop(RUN_STATE_IO_ERROR);
2782 bdrv_iostatus_set_err(bs, error);
2786 int bdrv_is_read_only(BlockDriverState *bs)
2788 return bs->read_only;
2791 int bdrv_is_sg(BlockDriverState *bs)
2793 return bs->sg;
2796 int bdrv_enable_write_cache(BlockDriverState *bs)
2798 return bs->enable_write_cache;
2801 void bdrv_set_enable_write_cache(BlockDriverState *bs, bool wce)
2803 bs->enable_write_cache = wce;
2805 /* so a reopen() will preserve wce */
2806 if (wce) {
2807 bs->open_flags |= BDRV_O_CACHE_WB;
2808 } else {
2809 bs->open_flags &= ~BDRV_O_CACHE_WB;
2813 int bdrv_is_encrypted(BlockDriverState *bs)
2815 if (bs->backing_hd && bs->backing_hd->encrypted)
2816 return 1;
2817 return bs->encrypted;
2820 int bdrv_key_required(BlockDriverState *bs)
2822 BlockDriverState *backing_hd = bs->backing_hd;
2824 if (backing_hd && backing_hd->encrypted && !backing_hd->valid_key)
2825 return 1;
2826 return (bs->encrypted && !bs->valid_key);
2829 int bdrv_set_key(BlockDriverState *bs, const char *key)
2831 int ret;
2832 if (bs->backing_hd && bs->backing_hd->encrypted) {
2833 ret = bdrv_set_key(bs->backing_hd, key);
2834 if (ret < 0)
2835 return ret;
2836 if (!bs->encrypted)
2837 return 0;
2839 if (!bs->encrypted) {
2840 return -EINVAL;
2841 } else if (!bs->drv || !bs->drv->bdrv_set_key) {
2842 return -ENOMEDIUM;
2844 ret = bs->drv->bdrv_set_key(bs, key);
2845 if (ret < 0) {
2846 bs->valid_key = 0;
2847 } else if (!bs->valid_key) {
2848 bs->valid_key = 1;
2849 /* call the change callback now, we skipped it on open */
2850 bdrv_dev_change_media_cb(bs, true);
2852 return ret;
2855 const char *bdrv_get_format_name(BlockDriverState *bs)
2857 return bs->drv ? bs->drv->format_name : NULL;
2860 void bdrv_iterate_format(void (*it)(void *opaque, const char *name),
2861 void *opaque)
2863 BlockDriver *drv;
2865 QLIST_FOREACH(drv, &bdrv_drivers, list) {
2866 it(opaque, drv->format_name);
2870 BlockDriverState *bdrv_find(const char *name)
2872 BlockDriverState *bs;
2874 QTAILQ_FOREACH(bs, &bdrv_states, list) {
2875 if (!strcmp(name, bs->device_name)) {
2876 return bs;
2879 return NULL;
2882 BlockDriverState *bdrv_next(BlockDriverState *bs)
2884 if (!bs) {
2885 return QTAILQ_FIRST(&bdrv_states);
2887 return QTAILQ_NEXT(bs, list);
2890 void bdrv_iterate(void (*it)(void *opaque, BlockDriverState *bs), void *opaque)
2892 BlockDriverState *bs;
2894 QTAILQ_FOREACH(bs, &bdrv_states, list) {
2895 it(opaque, bs);
2899 const char *bdrv_get_device_name(BlockDriverState *bs)
2901 return bs->device_name;
2904 int bdrv_get_flags(BlockDriverState *bs)
2906 return bs->open_flags;
2909 void bdrv_flush_all(void)
2911 BlockDriverState *bs;
2913 QTAILQ_FOREACH(bs, &bdrv_states, list) {
2914 bdrv_flush(bs);
2918 int bdrv_has_zero_init(BlockDriverState *bs)
2920 assert(bs->drv);
2922 if (bs->drv->bdrv_has_zero_init) {
2923 return bs->drv->bdrv_has_zero_init(bs);
2926 return 1;
2929 typedef struct BdrvCoIsAllocatedData {
2930 BlockDriverState *bs;
2931 BlockDriverState *base;
2932 int64_t sector_num;
2933 int nb_sectors;
2934 int *pnum;
2935 int ret;
2936 bool done;
2937 } BdrvCoIsAllocatedData;
2940 * Returns true iff the specified sector is present in the disk image. Drivers
2941 * not implementing the functionality are assumed to not support backing files,
2942 * hence all their sectors are reported as allocated.
2944 * If 'sector_num' is beyond the end of the disk image the return value is 0
2945 * and 'pnum' is set to 0.
2947 * 'pnum' is set to the number of sectors (including and immediately following
2948 * the specified sector) that are known to be in the same
2949 * allocated/unallocated state.
2951 * 'nb_sectors' is the max value 'pnum' should be set to. If nb_sectors goes
2952 * beyond the end of the disk image it will be clamped.
2954 int coroutine_fn bdrv_co_is_allocated(BlockDriverState *bs, int64_t sector_num,
2955 int nb_sectors, int *pnum)
2957 int64_t n;
2959 if (sector_num >= bs->total_sectors) {
2960 *pnum = 0;
2961 return 0;
2964 n = bs->total_sectors - sector_num;
2965 if (n < nb_sectors) {
2966 nb_sectors = n;
2969 if (!bs->drv->bdrv_co_is_allocated) {
2970 *pnum = nb_sectors;
2971 return 1;
2974 return bs->drv->bdrv_co_is_allocated(bs, sector_num, nb_sectors, pnum);
2977 /* Coroutine wrapper for bdrv_is_allocated() */
2978 static void coroutine_fn bdrv_is_allocated_co_entry(void *opaque)
2980 BdrvCoIsAllocatedData *data = opaque;
2981 BlockDriverState *bs = data->bs;
2983 data->ret = bdrv_co_is_allocated(bs, data->sector_num, data->nb_sectors,
2984 data->pnum);
2985 data->done = true;
2989 * Synchronous wrapper around bdrv_co_is_allocated().
2991 * See bdrv_co_is_allocated() for details.
2993 int bdrv_is_allocated(BlockDriverState *bs, int64_t sector_num, int nb_sectors,
2994 int *pnum)
2996 Coroutine *co;
2997 BdrvCoIsAllocatedData data = {
2998 .bs = bs,
2999 .sector_num = sector_num,
3000 .nb_sectors = nb_sectors,
3001 .pnum = pnum,
3002 .done = false,
3005 co = qemu_coroutine_create(bdrv_is_allocated_co_entry);
3006 qemu_coroutine_enter(co, &data);
3007 while (!data.done) {
3008 qemu_aio_wait();
3010 return data.ret;
3014 * Given an image chain: ... -> [BASE] -> [INTER1] -> [INTER2] -> [TOP]
3016 * Return true if the given sector is allocated in any image between
3017 * BASE and TOP (inclusive). BASE can be NULL to check if the given
3018 * sector is allocated in any image of the chain. Return false otherwise.
3020 * 'pnum' is set to the number of sectors (including and immediately following
3021 * the specified sector) that are known to be in the same
3022 * allocated/unallocated state.
3025 int coroutine_fn bdrv_co_is_allocated_above(BlockDriverState *top,
3026 BlockDriverState *base,
3027 int64_t sector_num,
3028 int nb_sectors, int *pnum)
3030 BlockDriverState *intermediate;
3031 int ret, n = nb_sectors;
3033 intermediate = top;
3034 while (intermediate && intermediate != base) {
3035 int pnum_inter;
3036 ret = bdrv_co_is_allocated(intermediate, sector_num, nb_sectors,
3037 &pnum_inter);
3038 if (ret < 0) {
3039 return ret;
3040 } else if (ret) {
3041 *pnum = pnum_inter;
3042 return 1;
3046 * [sector_num, nb_sectors] is unallocated on top but intermediate
3047 * might have
3049 * [sector_num+x, nr_sectors] allocated.
3051 if (n > pnum_inter &&
3052 (intermediate == top ||
3053 sector_num + pnum_inter < intermediate->total_sectors)) {
3054 n = pnum_inter;
3057 intermediate = intermediate->backing_hd;
3060 *pnum = n;
3061 return 0;
3064 /* Coroutine wrapper for bdrv_is_allocated_above() */
3065 static void coroutine_fn bdrv_is_allocated_above_co_entry(void *opaque)
3067 BdrvCoIsAllocatedData *data = opaque;
3068 BlockDriverState *top = data->bs;
3069 BlockDriverState *base = data->base;
3071 data->ret = bdrv_co_is_allocated_above(top, base, data->sector_num,
3072 data->nb_sectors, data->pnum);
3073 data->done = true;
3077 * Synchronous wrapper around bdrv_co_is_allocated_above().
3079 * See bdrv_co_is_allocated_above() for details.
3081 int bdrv_is_allocated_above(BlockDriverState *top, BlockDriverState *base,
3082 int64_t sector_num, int nb_sectors, int *pnum)
3084 Coroutine *co;
3085 BdrvCoIsAllocatedData data = {
3086 .bs = top,
3087 .base = base,
3088 .sector_num = sector_num,
3089 .nb_sectors = nb_sectors,
3090 .pnum = pnum,
3091 .done = false,
3094 co = qemu_coroutine_create(bdrv_is_allocated_above_co_entry);
3095 qemu_coroutine_enter(co, &data);
3096 while (!data.done) {
3097 qemu_aio_wait();
3099 return data.ret;
3102 BlockInfo *bdrv_query_info(BlockDriverState *bs)
3104 BlockInfo *info = g_malloc0(sizeof(*info));
3105 info->device = g_strdup(bs->device_name);
3106 info->type = g_strdup("unknown");
3107 info->locked = bdrv_dev_is_medium_locked(bs);
3108 info->removable = bdrv_dev_has_removable_media(bs);
3110 if (bdrv_dev_has_removable_media(bs)) {
3111 info->has_tray_open = true;
3112 info->tray_open = bdrv_dev_is_tray_open(bs);
3115 if (bdrv_iostatus_is_enabled(bs)) {
3116 info->has_io_status = true;
3117 info->io_status = bs->iostatus;
3120 if (bs->dirty_bitmap) {
3121 info->has_dirty = true;
3122 info->dirty = g_malloc0(sizeof(*info->dirty));
3123 info->dirty->count = bdrv_get_dirty_count(bs) * BDRV_SECTOR_SIZE;
3124 info->dirty->granularity =
3125 ((int64_t) BDRV_SECTOR_SIZE << hbitmap_granularity(bs->dirty_bitmap));
3128 if (bs->drv) {
3129 info->has_inserted = true;
3130 info->inserted = g_malloc0(sizeof(*info->inserted));
3131 info->inserted->file = g_strdup(bs->filename);
3132 info->inserted->ro = bs->read_only;
3133 info->inserted->drv = g_strdup(bs->drv->format_name);
3134 info->inserted->encrypted = bs->encrypted;
3135 info->inserted->encryption_key_missing = bdrv_key_required(bs);
3137 if (bs->backing_file[0]) {
3138 info->inserted->has_backing_file = true;
3139 info->inserted->backing_file = g_strdup(bs->backing_file);
3142 info->inserted->backing_file_depth = bdrv_get_backing_file_depth(bs);
3144 if (bs->io_limits_enabled) {
3145 info->inserted->bps =
3146 bs->io_limits.bps[BLOCK_IO_LIMIT_TOTAL];
3147 info->inserted->bps_rd =
3148 bs->io_limits.bps[BLOCK_IO_LIMIT_READ];
3149 info->inserted->bps_wr =
3150 bs->io_limits.bps[BLOCK_IO_LIMIT_WRITE];
3151 info->inserted->iops =
3152 bs->io_limits.iops[BLOCK_IO_LIMIT_TOTAL];
3153 info->inserted->iops_rd =
3154 bs->io_limits.iops[BLOCK_IO_LIMIT_READ];
3155 info->inserted->iops_wr =
3156 bs->io_limits.iops[BLOCK_IO_LIMIT_WRITE];
3159 return info;
3162 BlockInfoList *qmp_query_block(Error **errp)
3164 BlockInfoList *head = NULL, **p_next = &head;
3165 BlockDriverState *bs;
3167 QTAILQ_FOREACH(bs, &bdrv_states, list) {
3168 BlockInfoList *info = g_malloc0(sizeof(*info));
3169 info->value = bdrv_query_info(bs);
3171 *p_next = info;
3172 p_next = &info->next;
3175 return head;
3178 BlockStats *bdrv_query_stats(const BlockDriverState *bs)
3180 BlockStats *s;
3182 s = g_malloc0(sizeof(*s));
3184 if (bs->device_name[0]) {
3185 s->has_device = true;
3186 s->device = g_strdup(bs->device_name);
3189 s->stats = g_malloc0(sizeof(*s->stats));
3190 s->stats->rd_bytes = bs->nr_bytes[BDRV_ACCT_READ];
3191 s->stats->wr_bytes = bs->nr_bytes[BDRV_ACCT_WRITE];
3192 s->stats->rd_operations = bs->nr_ops[BDRV_ACCT_READ];
3193 s->stats->wr_operations = bs->nr_ops[BDRV_ACCT_WRITE];
3194 s->stats->wr_highest_offset = bs->wr_highest_sector * BDRV_SECTOR_SIZE;
3195 s->stats->flush_operations = bs->nr_ops[BDRV_ACCT_FLUSH];
3196 s->stats->wr_total_time_ns = bs->total_time_ns[BDRV_ACCT_WRITE];
3197 s->stats->rd_total_time_ns = bs->total_time_ns[BDRV_ACCT_READ];
3198 s->stats->flush_total_time_ns = bs->total_time_ns[BDRV_ACCT_FLUSH];
3200 if (bs->file) {
3201 s->has_parent = true;
3202 s->parent = bdrv_query_stats(bs->file);
3205 return s;
3208 BlockStatsList *qmp_query_blockstats(Error **errp)
3210 BlockStatsList *head = NULL, **p_next = &head;
3211 BlockDriverState *bs;
3213 QTAILQ_FOREACH(bs, &bdrv_states, list) {
3214 BlockStatsList *info = g_malloc0(sizeof(*info));
3215 info->value = bdrv_query_stats(bs);
3217 *p_next = info;
3218 p_next = &info->next;
3221 return head;
3224 const char *bdrv_get_encrypted_filename(BlockDriverState *bs)
3226 if (bs->backing_hd && bs->backing_hd->encrypted)
3227 return bs->backing_file;
3228 else if (bs->encrypted)
3229 return bs->filename;
3230 else
3231 return NULL;
3234 void bdrv_get_backing_filename(BlockDriverState *bs,
3235 char *filename, int filename_size)
3237 pstrcpy(filename, filename_size, bs->backing_file);
3240 int bdrv_write_compressed(BlockDriverState *bs, int64_t sector_num,
3241 const uint8_t *buf, int nb_sectors)
3243 BlockDriver *drv = bs->drv;
3244 if (!drv)
3245 return -ENOMEDIUM;
3246 if (!drv->bdrv_write_compressed)
3247 return -ENOTSUP;
3248 if (bdrv_check_request(bs, sector_num, nb_sectors))
3249 return -EIO;
3251 assert(!bs->dirty_bitmap);
3253 return drv->bdrv_write_compressed(bs, sector_num, buf, nb_sectors);
3256 int bdrv_get_info(BlockDriverState *bs, BlockDriverInfo *bdi)
3258 BlockDriver *drv = bs->drv;
3259 if (!drv)
3260 return -ENOMEDIUM;
3261 if (!drv->bdrv_get_info)
3262 return -ENOTSUP;
3263 memset(bdi, 0, sizeof(*bdi));
3264 return drv->bdrv_get_info(bs, bdi);
3267 int bdrv_save_vmstate(BlockDriverState *bs, const uint8_t *buf,
3268 int64_t pos, int size)
3270 QEMUIOVector qiov;
3271 struct iovec iov = {
3272 .iov_base = (void *) buf,
3273 .iov_len = size,
3276 qemu_iovec_init_external(&qiov, &iov, 1);
3277 return bdrv_writev_vmstate(bs, &qiov, pos);
3280 int bdrv_writev_vmstate(BlockDriverState *bs, QEMUIOVector *qiov, int64_t pos)
3282 BlockDriver *drv = bs->drv;
3284 if (!drv) {
3285 return -ENOMEDIUM;
3286 } else if (drv->bdrv_save_vmstate) {
3287 return drv->bdrv_save_vmstate(bs, qiov, pos);
3288 } else if (bs->file) {
3289 return bdrv_writev_vmstate(bs->file, qiov, pos);
3292 return -ENOTSUP;
3295 int bdrv_load_vmstate(BlockDriverState *bs, uint8_t *buf,
3296 int64_t pos, int size)
3298 BlockDriver *drv = bs->drv;
3299 if (!drv)
3300 return -ENOMEDIUM;
3301 if (drv->bdrv_load_vmstate)
3302 return drv->bdrv_load_vmstate(bs, buf, pos, size);
3303 if (bs->file)
3304 return bdrv_load_vmstate(bs->file, buf, pos, size);
3305 return -ENOTSUP;
3308 void bdrv_debug_event(BlockDriverState *bs, BlkDebugEvent event)
3310 BlockDriver *drv = bs->drv;
3312 if (!drv || !drv->bdrv_debug_event) {
3313 return;
3316 drv->bdrv_debug_event(bs, event);
3319 int bdrv_debug_breakpoint(BlockDriverState *bs, const char *event,
3320 const char *tag)
3322 while (bs && bs->drv && !bs->drv->bdrv_debug_breakpoint) {
3323 bs = bs->file;
3326 if (bs && bs->drv && bs->drv->bdrv_debug_breakpoint) {
3327 return bs->drv->bdrv_debug_breakpoint(bs, event, tag);
3330 return -ENOTSUP;
3333 int bdrv_debug_resume(BlockDriverState *bs, const char *tag)
3335 while (bs && bs->drv && !bs->drv->bdrv_debug_resume) {
3336 bs = bs->file;
3339 if (bs && bs->drv && bs->drv->bdrv_debug_resume) {
3340 return bs->drv->bdrv_debug_resume(bs, tag);
3343 return -ENOTSUP;
3346 bool bdrv_debug_is_suspended(BlockDriverState *bs, const char *tag)
3348 while (bs && bs->drv && !bs->drv->bdrv_debug_is_suspended) {
3349 bs = bs->file;
3352 if (bs && bs->drv && bs->drv->bdrv_debug_is_suspended) {
3353 return bs->drv->bdrv_debug_is_suspended(bs, tag);
3356 return false;
3359 /**************************************************************/
3360 /* handling of snapshots */
3362 int bdrv_can_snapshot(BlockDriverState *bs)
3364 BlockDriver *drv = bs->drv;
3365 if (!drv || !bdrv_is_inserted(bs) || bdrv_is_read_only(bs)) {
3366 return 0;
3369 if (!drv->bdrv_snapshot_create) {
3370 if (bs->file != NULL) {
3371 return bdrv_can_snapshot(bs->file);
3373 return 0;
3376 return 1;
3379 int bdrv_is_snapshot(BlockDriverState *bs)
3381 return !!(bs->open_flags & BDRV_O_SNAPSHOT);
3384 BlockDriverState *bdrv_snapshots(void)
3386 BlockDriverState *bs;
3388 if (bs_snapshots) {
3389 return bs_snapshots;
3392 bs = NULL;
3393 while ((bs = bdrv_next(bs))) {
3394 if (bdrv_can_snapshot(bs)) {
3395 bs_snapshots = bs;
3396 return bs;
3399 return NULL;
3402 int bdrv_snapshot_create(BlockDriverState *bs,
3403 QEMUSnapshotInfo *sn_info)
3405 BlockDriver *drv = bs->drv;
3406 if (!drv)
3407 return -ENOMEDIUM;
3408 if (drv->bdrv_snapshot_create)
3409 return drv->bdrv_snapshot_create(bs, sn_info);
3410 if (bs->file)
3411 return bdrv_snapshot_create(bs->file, sn_info);
3412 return -ENOTSUP;
3415 int bdrv_snapshot_goto(BlockDriverState *bs,
3416 const char *snapshot_id)
3418 BlockDriver *drv = bs->drv;
3419 int ret, open_ret;
3421 if (!drv)
3422 return -ENOMEDIUM;
3423 if (drv->bdrv_snapshot_goto)
3424 return drv->bdrv_snapshot_goto(bs, snapshot_id);
3426 if (bs->file) {
3427 drv->bdrv_close(bs);
3428 ret = bdrv_snapshot_goto(bs->file, snapshot_id);
3429 open_ret = drv->bdrv_open(bs, NULL, bs->open_flags);
3430 if (open_ret < 0) {
3431 bdrv_delete(bs->file);
3432 bs->drv = NULL;
3433 return open_ret;
3435 return ret;
3438 return -ENOTSUP;
3441 int bdrv_snapshot_delete(BlockDriverState *bs, const char *snapshot_id)
3443 BlockDriver *drv = bs->drv;
3444 if (!drv)
3445 return -ENOMEDIUM;
3446 if (drv->bdrv_snapshot_delete)
3447 return drv->bdrv_snapshot_delete(bs, snapshot_id);
3448 if (bs->file)
3449 return bdrv_snapshot_delete(bs->file, snapshot_id);
3450 return -ENOTSUP;
3453 int bdrv_snapshot_list(BlockDriverState *bs,
3454 QEMUSnapshotInfo **psn_info)
3456 BlockDriver *drv = bs->drv;
3457 if (!drv)
3458 return -ENOMEDIUM;
3459 if (drv->bdrv_snapshot_list)
3460 return drv->bdrv_snapshot_list(bs, psn_info);
3461 if (bs->file)
3462 return bdrv_snapshot_list(bs->file, psn_info);
3463 return -ENOTSUP;
3466 int bdrv_snapshot_load_tmp(BlockDriverState *bs,
3467 const char *snapshot_name)
3469 BlockDriver *drv = bs->drv;
3470 if (!drv) {
3471 return -ENOMEDIUM;
3473 if (!bs->read_only) {
3474 return -EINVAL;
3476 if (drv->bdrv_snapshot_load_tmp) {
3477 return drv->bdrv_snapshot_load_tmp(bs, snapshot_name);
3479 return -ENOTSUP;
3482 /* backing_file can either be relative, or absolute, or a protocol. If it is
3483 * relative, it must be relative to the chain. So, passing in bs->filename
3484 * from a BDS as backing_file should not be done, as that may be relative to
3485 * the CWD rather than the chain. */
3486 BlockDriverState *bdrv_find_backing_image(BlockDriverState *bs,
3487 const char *backing_file)
3489 char *filename_full = NULL;
3490 char *backing_file_full = NULL;
3491 char *filename_tmp = NULL;
3492 int is_protocol = 0;
3493 BlockDriverState *curr_bs = NULL;
3494 BlockDriverState *retval = NULL;
3496 if (!bs || !bs->drv || !backing_file) {
3497 return NULL;
3500 filename_full = g_malloc(PATH_MAX);
3501 backing_file_full = g_malloc(PATH_MAX);
3502 filename_tmp = g_malloc(PATH_MAX);
3504 is_protocol = path_has_protocol(backing_file);
3506 for (curr_bs = bs; curr_bs->backing_hd; curr_bs = curr_bs->backing_hd) {
3508 /* If either of the filename paths is actually a protocol, then
3509 * compare unmodified paths; otherwise make paths relative */
3510 if (is_protocol || path_has_protocol(curr_bs->backing_file)) {
3511 if (strcmp(backing_file, curr_bs->backing_file) == 0) {
3512 retval = curr_bs->backing_hd;
3513 break;
3515 } else {
3516 /* If not an absolute filename path, make it relative to the current
3517 * image's filename path */
3518 path_combine(filename_tmp, PATH_MAX, curr_bs->filename,
3519 backing_file);
3521 /* We are going to compare absolute pathnames */
3522 if (!realpath(filename_tmp, filename_full)) {
3523 continue;
3526 /* We need to make sure the backing filename we are comparing against
3527 * is relative to the current image filename (or absolute) */
3528 path_combine(filename_tmp, PATH_MAX, curr_bs->filename,
3529 curr_bs->backing_file);
3531 if (!realpath(filename_tmp, backing_file_full)) {
3532 continue;
3535 if (strcmp(backing_file_full, filename_full) == 0) {
3536 retval = curr_bs->backing_hd;
3537 break;
3542 g_free(filename_full);
3543 g_free(backing_file_full);
3544 g_free(filename_tmp);
3545 return retval;
3548 int bdrv_get_backing_file_depth(BlockDriverState *bs)
3550 if (!bs->drv) {
3551 return 0;
3554 if (!bs->backing_hd) {
3555 return 0;
3558 return 1 + bdrv_get_backing_file_depth(bs->backing_hd);
3561 BlockDriverState *bdrv_find_base(BlockDriverState *bs)
3563 BlockDriverState *curr_bs = NULL;
3565 if (!bs) {
3566 return NULL;
3569 curr_bs = bs;
3571 while (curr_bs->backing_hd) {
3572 curr_bs = curr_bs->backing_hd;
3574 return curr_bs;
3577 #define NB_SUFFIXES 4
3579 char *get_human_readable_size(char *buf, int buf_size, int64_t size)
3581 static const char suffixes[NB_SUFFIXES] = "KMGT";
3582 int64_t base;
3583 int i;
3585 if (size <= 999) {
3586 snprintf(buf, buf_size, "%" PRId64, size);
3587 } else {
3588 base = 1024;
3589 for(i = 0; i < NB_SUFFIXES; i++) {
3590 if (size < (10 * base)) {
3591 snprintf(buf, buf_size, "%0.1f%c",
3592 (double)size / base,
3593 suffixes[i]);
3594 break;
3595 } else if (size < (1000 * base) || i == (NB_SUFFIXES - 1)) {
3596 snprintf(buf, buf_size, "%" PRId64 "%c",
3597 ((size + (base >> 1)) / base),
3598 suffixes[i]);
3599 break;
3601 base = base * 1024;
3604 return buf;
3607 char *bdrv_snapshot_dump(char *buf, int buf_size, QEMUSnapshotInfo *sn)
3609 char buf1[128], date_buf[128], clock_buf[128];
3610 struct tm tm;
3611 time_t ti;
3612 int64_t secs;
3614 if (!sn) {
3615 snprintf(buf, buf_size,
3616 "%-10s%-20s%7s%20s%15s",
3617 "ID", "TAG", "VM SIZE", "DATE", "VM CLOCK");
3618 } else {
3619 ti = sn->date_sec;
3620 localtime_r(&ti, &tm);
3621 strftime(date_buf, sizeof(date_buf),
3622 "%Y-%m-%d %H:%M:%S", &tm);
3623 secs = sn->vm_clock_nsec / 1000000000;
3624 snprintf(clock_buf, sizeof(clock_buf),
3625 "%02d:%02d:%02d.%03d",
3626 (int)(secs / 3600),
3627 (int)((secs / 60) % 60),
3628 (int)(secs % 60),
3629 (int)((sn->vm_clock_nsec / 1000000) % 1000));
3630 snprintf(buf, buf_size,
3631 "%-10s%-20s%7s%20s%15s",
3632 sn->id_str, sn->name,
3633 get_human_readable_size(buf1, sizeof(buf1), sn->vm_state_size),
3634 date_buf,
3635 clock_buf);
3637 return buf;
3640 /**************************************************************/
3641 /* async I/Os */
3643 BlockDriverAIOCB *bdrv_aio_readv(BlockDriverState *bs, int64_t sector_num,
3644 QEMUIOVector *qiov, int nb_sectors,
3645 BlockDriverCompletionFunc *cb, void *opaque)
3647 trace_bdrv_aio_readv(bs, sector_num, nb_sectors, opaque);
3649 return bdrv_co_aio_rw_vector(bs, sector_num, qiov, nb_sectors,
3650 cb, opaque, false);
3653 BlockDriverAIOCB *bdrv_aio_writev(BlockDriverState *bs, int64_t sector_num,
3654 QEMUIOVector *qiov, int nb_sectors,
3655 BlockDriverCompletionFunc *cb, void *opaque)
3657 trace_bdrv_aio_writev(bs, sector_num, nb_sectors, opaque);
3659 return bdrv_co_aio_rw_vector(bs, sector_num, qiov, nb_sectors,
3660 cb, opaque, true);
3664 typedef struct MultiwriteCB {
3665 int error;
3666 int num_requests;
3667 int num_callbacks;
3668 struct {
3669 BlockDriverCompletionFunc *cb;
3670 void *opaque;
3671 QEMUIOVector *free_qiov;
3672 } callbacks[];
3673 } MultiwriteCB;
3675 static void multiwrite_user_cb(MultiwriteCB *mcb)
3677 int i;
3679 for (i = 0; i < mcb->num_callbacks; i++) {
3680 mcb->callbacks[i].cb(mcb->callbacks[i].opaque, mcb->error);
3681 if (mcb->callbacks[i].free_qiov) {
3682 qemu_iovec_destroy(mcb->callbacks[i].free_qiov);
3684 g_free(mcb->callbacks[i].free_qiov);
3688 static void multiwrite_cb(void *opaque, int ret)
3690 MultiwriteCB *mcb = opaque;
3692 trace_multiwrite_cb(mcb, ret);
3694 if (ret < 0 && !mcb->error) {
3695 mcb->error = ret;
3698 mcb->num_requests--;
3699 if (mcb->num_requests == 0) {
3700 multiwrite_user_cb(mcb);
3701 g_free(mcb);
3705 static int multiwrite_req_compare(const void *a, const void *b)
3707 const BlockRequest *req1 = a, *req2 = b;
3710 * Note that we can't simply subtract req2->sector from req1->sector
3711 * here as that could overflow the return value.
3713 if (req1->sector > req2->sector) {
3714 return 1;
3715 } else if (req1->sector < req2->sector) {
3716 return -1;
3717 } else {
3718 return 0;
3723 * Takes a bunch of requests and tries to merge them. Returns the number of
3724 * requests that remain after merging.
3726 static int multiwrite_merge(BlockDriverState *bs, BlockRequest *reqs,
3727 int num_reqs, MultiwriteCB *mcb)
3729 int i, outidx;
3731 // Sort requests by start sector
3732 qsort(reqs, num_reqs, sizeof(*reqs), &multiwrite_req_compare);
3734 // Check if adjacent requests touch the same clusters. If so, combine them,
3735 // filling up gaps with zero sectors.
3736 outidx = 0;
3737 for (i = 1; i < num_reqs; i++) {
3738 int merge = 0;
3739 int64_t oldreq_last = reqs[outidx].sector + reqs[outidx].nb_sectors;
3741 // Handle exactly sequential writes and overlapping writes.
3742 if (reqs[i].sector <= oldreq_last) {
3743 merge = 1;
3746 if (reqs[outidx].qiov->niov + reqs[i].qiov->niov + 1 > IOV_MAX) {
3747 merge = 0;
3750 if (merge) {
3751 size_t size;
3752 QEMUIOVector *qiov = g_malloc0(sizeof(*qiov));
3753 qemu_iovec_init(qiov,
3754 reqs[outidx].qiov->niov + reqs[i].qiov->niov + 1);
3756 // Add the first request to the merged one. If the requests are
3757 // overlapping, drop the last sectors of the first request.
3758 size = (reqs[i].sector - reqs[outidx].sector) << 9;
3759 qemu_iovec_concat(qiov, reqs[outidx].qiov, 0, size);
3761 // We should need to add any zeros between the two requests
3762 assert (reqs[i].sector <= oldreq_last);
3764 // Add the second request
3765 qemu_iovec_concat(qiov, reqs[i].qiov, 0, reqs[i].qiov->size);
3767 reqs[outidx].nb_sectors = qiov->size >> 9;
3768 reqs[outidx].qiov = qiov;
3770 mcb->callbacks[i].free_qiov = reqs[outidx].qiov;
3771 } else {
3772 outidx++;
3773 reqs[outidx].sector = reqs[i].sector;
3774 reqs[outidx].nb_sectors = reqs[i].nb_sectors;
3775 reqs[outidx].qiov = reqs[i].qiov;
3779 return outidx + 1;
3783 * Submit multiple AIO write requests at once.
3785 * On success, the function returns 0 and all requests in the reqs array have
3786 * been submitted. In error case this function returns -1, and any of the
3787 * requests may or may not be submitted yet. In particular, this means that the
3788 * callback will be called for some of the requests, for others it won't. The
3789 * caller must check the error field of the BlockRequest to wait for the right
3790 * callbacks (if error != 0, no callback will be called).
3792 * The implementation may modify the contents of the reqs array, e.g. to merge
3793 * requests. However, the fields opaque and error are left unmodified as they
3794 * are used to signal failure for a single request to the caller.
3796 int bdrv_aio_multiwrite(BlockDriverState *bs, BlockRequest *reqs, int num_reqs)
3798 MultiwriteCB *mcb;
3799 int i;
3801 /* don't submit writes if we don't have a medium */
3802 if (bs->drv == NULL) {
3803 for (i = 0; i < num_reqs; i++) {
3804 reqs[i].error = -ENOMEDIUM;
3806 return -1;
3809 if (num_reqs == 0) {
3810 return 0;
3813 // Create MultiwriteCB structure
3814 mcb = g_malloc0(sizeof(*mcb) + num_reqs * sizeof(*mcb->callbacks));
3815 mcb->num_requests = 0;
3816 mcb->num_callbacks = num_reqs;
3818 for (i = 0; i < num_reqs; i++) {
3819 mcb->callbacks[i].cb = reqs[i].cb;
3820 mcb->callbacks[i].opaque = reqs[i].opaque;
3823 // Check for mergable requests
3824 num_reqs = multiwrite_merge(bs, reqs, num_reqs, mcb);
3826 trace_bdrv_aio_multiwrite(mcb, mcb->num_callbacks, num_reqs);
3828 /* Run the aio requests. */
3829 mcb->num_requests = num_reqs;
3830 for (i = 0; i < num_reqs; i++) {
3831 bdrv_aio_writev(bs, reqs[i].sector, reqs[i].qiov,
3832 reqs[i].nb_sectors, multiwrite_cb, mcb);
3835 return 0;
3838 void bdrv_aio_cancel(BlockDriverAIOCB *acb)
3840 acb->aiocb_info->cancel(acb);
3843 /* block I/O throttling */
3844 static bool bdrv_exceed_bps_limits(BlockDriverState *bs, int nb_sectors,
3845 bool is_write, double elapsed_time, uint64_t *wait)
3847 uint64_t bps_limit = 0;
3848 uint64_t extension;
3849 double bytes_limit, bytes_base, bytes_res;
3850 double slice_time, wait_time;
3852 if (bs->io_limits.bps[BLOCK_IO_LIMIT_TOTAL]) {
3853 bps_limit = bs->io_limits.bps[BLOCK_IO_LIMIT_TOTAL];
3854 } else if (bs->io_limits.bps[is_write]) {
3855 bps_limit = bs->io_limits.bps[is_write];
3856 } else {
3857 if (wait) {
3858 *wait = 0;
3861 return false;
3864 slice_time = bs->slice_end - bs->slice_start;
3865 slice_time /= (NANOSECONDS_PER_SECOND);
3866 bytes_limit = bps_limit * slice_time;
3867 bytes_base = bs->slice_submitted.bytes[is_write];
3868 if (bs->io_limits.bps[BLOCK_IO_LIMIT_TOTAL]) {
3869 bytes_base += bs->slice_submitted.bytes[!is_write];
3872 /* bytes_base: the bytes of data which have been read/written; and
3873 * it is obtained from the history statistic info.
3874 * bytes_res: the remaining bytes of data which need to be read/written.
3875 * (bytes_base + bytes_res) / bps_limit: used to calcuate
3876 * the total time for completing reading/writting all data.
3878 bytes_res = (unsigned) nb_sectors * BDRV_SECTOR_SIZE;
3880 if (bytes_base + bytes_res <= bytes_limit) {
3881 if (wait) {
3882 *wait = 0;
3885 return false;
3888 /* Calc approx time to dispatch */
3889 wait_time = (bytes_base + bytes_res) / bps_limit - elapsed_time;
3891 /* When the I/O rate at runtime exceeds the limits,
3892 * bs->slice_end need to be extended in order that the current statistic
3893 * info can be kept until the timer fire, so it is increased and tuned
3894 * based on the result of experiment.
3896 extension = wait_time * NANOSECONDS_PER_SECOND;
3897 extension = DIV_ROUND_UP(extension, BLOCK_IO_SLICE_TIME) *
3898 BLOCK_IO_SLICE_TIME;
3899 bs->slice_end += extension;
3900 if (wait) {
3901 *wait = wait_time * NANOSECONDS_PER_SECOND;
3904 return true;
3907 static bool bdrv_exceed_iops_limits(BlockDriverState *bs, bool is_write,
3908 double elapsed_time, uint64_t *wait)
3910 uint64_t iops_limit = 0;
3911 double ios_limit, ios_base;
3912 double slice_time, wait_time;
3914 if (bs->io_limits.iops[BLOCK_IO_LIMIT_TOTAL]) {
3915 iops_limit = bs->io_limits.iops[BLOCK_IO_LIMIT_TOTAL];
3916 } else if (bs->io_limits.iops[is_write]) {
3917 iops_limit = bs->io_limits.iops[is_write];
3918 } else {
3919 if (wait) {
3920 *wait = 0;
3923 return false;
3926 slice_time = bs->slice_end - bs->slice_start;
3927 slice_time /= (NANOSECONDS_PER_SECOND);
3928 ios_limit = iops_limit * slice_time;
3929 ios_base = bs->slice_submitted.ios[is_write];
3930 if (bs->io_limits.iops[BLOCK_IO_LIMIT_TOTAL]) {
3931 ios_base += bs->slice_submitted.ios[!is_write];
3934 if (ios_base + 1 <= ios_limit) {
3935 if (wait) {
3936 *wait = 0;
3939 return false;
3942 /* Calc approx time to dispatch, in seconds */
3943 wait_time = (ios_base + 1) / iops_limit;
3944 if (wait_time > elapsed_time) {
3945 wait_time = wait_time - elapsed_time;
3946 } else {
3947 wait_time = 0;
3950 /* Exceeded current slice, extend it by another slice time */
3951 bs->slice_end += BLOCK_IO_SLICE_TIME;
3952 if (wait) {
3953 *wait = wait_time * NANOSECONDS_PER_SECOND;
3956 return true;
3959 static bool bdrv_exceed_io_limits(BlockDriverState *bs, int nb_sectors,
3960 bool is_write, int64_t *wait)
3962 int64_t now, max_wait;
3963 uint64_t bps_wait = 0, iops_wait = 0;
3964 double elapsed_time;
3965 int bps_ret, iops_ret;
3967 now = qemu_get_clock_ns(vm_clock);
3968 if (now > bs->slice_end) {
3969 bs->slice_start = now;
3970 bs->slice_end = now + BLOCK_IO_SLICE_TIME;
3971 memset(&bs->slice_submitted, 0, sizeof(bs->slice_submitted));
3974 elapsed_time = now - bs->slice_start;
3975 elapsed_time /= (NANOSECONDS_PER_SECOND);
3977 bps_ret = bdrv_exceed_bps_limits(bs, nb_sectors,
3978 is_write, elapsed_time, &bps_wait);
3979 iops_ret = bdrv_exceed_iops_limits(bs, is_write,
3980 elapsed_time, &iops_wait);
3981 if (bps_ret || iops_ret) {
3982 max_wait = bps_wait > iops_wait ? bps_wait : iops_wait;
3983 if (wait) {
3984 *wait = max_wait;
3987 now = qemu_get_clock_ns(vm_clock);
3988 if (bs->slice_end < now + max_wait) {
3989 bs->slice_end = now + max_wait;
3992 return true;
3995 if (wait) {
3996 *wait = 0;
3999 bs->slice_submitted.bytes[is_write] += (int64_t)nb_sectors *
4000 BDRV_SECTOR_SIZE;
4001 bs->slice_submitted.ios[is_write]++;
4003 return false;
4006 /**************************************************************/
4007 /* async block device emulation */
4009 typedef struct BlockDriverAIOCBSync {
4010 BlockDriverAIOCB common;
4011 QEMUBH *bh;
4012 int ret;
4013 /* vector translation state */
4014 QEMUIOVector *qiov;
4015 uint8_t *bounce;
4016 int is_write;
4017 } BlockDriverAIOCBSync;
4019 static void bdrv_aio_cancel_em(BlockDriverAIOCB *blockacb)
4021 BlockDriverAIOCBSync *acb =
4022 container_of(blockacb, BlockDriverAIOCBSync, common);
4023 qemu_bh_delete(acb->bh);
4024 acb->bh = NULL;
4025 qemu_aio_release(acb);
4028 static const AIOCBInfo bdrv_em_aiocb_info = {
4029 .aiocb_size = sizeof(BlockDriverAIOCBSync),
4030 .cancel = bdrv_aio_cancel_em,
4033 static void bdrv_aio_bh_cb(void *opaque)
4035 BlockDriverAIOCBSync *acb = opaque;
4037 if (!acb->is_write)
4038 qemu_iovec_from_buf(acb->qiov, 0, acb->bounce, acb->qiov->size);
4039 qemu_vfree(acb->bounce);
4040 acb->common.cb(acb->common.opaque, acb->ret);
4041 qemu_bh_delete(acb->bh);
4042 acb->bh = NULL;
4043 qemu_aio_release(acb);
4046 static BlockDriverAIOCB *bdrv_aio_rw_vector(BlockDriverState *bs,
4047 int64_t sector_num,
4048 QEMUIOVector *qiov,
4049 int nb_sectors,
4050 BlockDriverCompletionFunc *cb,
4051 void *opaque,
4052 int is_write)
4055 BlockDriverAIOCBSync *acb;
4057 acb = qemu_aio_get(&bdrv_em_aiocb_info, bs, cb, opaque);
4058 acb->is_write = is_write;
4059 acb->qiov = qiov;
4060 acb->bounce = qemu_blockalign(bs, qiov->size);
4061 acb->bh = qemu_bh_new(bdrv_aio_bh_cb, acb);
4063 if (is_write) {
4064 qemu_iovec_to_buf(acb->qiov, 0, acb->bounce, qiov->size);
4065 acb->ret = bs->drv->bdrv_write(bs, sector_num, acb->bounce, nb_sectors);
4066 } else {
4067 acb->ret = bs->drv->bdrv_read(bs, sector_num, acb->bounce, nb_sectors);
4070 qemu_bh_schedule(acb->bh);
4072 return &acb->common;
4075 static BlockDriverAIOCB *bdrv_aio_readv_em(BlockDriverState *bs,
4076 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
4077 BlockDriverCompletionFunc *cb, void *opaque)
4079 return bdrv_aio_rw_vector(bs, sector_num, qiov, nb_sectors, cb, opaque, 0);
4082 static BlockDriverAIOCB *bdrv_aio_writev_em(BlockDriverState *bs,
4083 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
4084 BlockDriverCompletionFunc *cb, void *opaque)
4086 return bdrv_aio_rw_vector(bs, sector_num, qiov, nb_sectors, cb, opaque, 1);
4090 typedef struct BlockDriverAIOCBCoroutine {
4091 BlockDriverAIOCB common;
4092 BlockRequest req;
4093 bool is_write;
4094 bool *done;
4095 QEMUBH* bh;
4096 } BlockDriverAIOCBCoroutine;
4098 static void bdrv_aio_co_cancel_em(BlockDriverAIOCB *blockacb)
4100 BlockDriverAIOCBCoroutine *acb =
4101 container_of(blockacb, BlockDriverAIOCBCoroutine, common);
4102 bool done = false;
4104 acb->done = &done;
4105 while (!done) {
4106 qemu_aio_wait();
4110 static const AIOCBInfo bdrv_em_co_aiocb_info = {
4111 .aiocb_size = sizeof(BlockDriverAIOCBCoroutine),
4112 .cancel = bdrv_aio_co_cancel_em,
4115 static void bdrv_co_em_bh(void *opaque)
4117 BlockDriverAIOCBCoroutine *acb = opaque;
4119 acb->common.cb(acb->common.opaque, acb->req.error);
4121 if (acb->done) {
4122 *acb->done = true;
4125 qemu_bh_delete(acb->bh);
4126 qemu_aio_release(acb);
4129 /* Invoke bdrv_co_do_readv/bdrv_co_do_writev */
4130 static void coroutine_fn bdrv_co_do_rw(void *opaque)
4132 BlockDriverAIOCBCoroutine *acb = opaque;
4133 BlockDriverState *bs = acb->common.bs;
4135 if (!acb->is_write) {
4136 acb->req.error = bdrv_co_do_readv(bs, acb->req.sector,
4137 acb->req.nb_sectors, acb->req.qiov, 0);
4138 } else {
4139 acb->req.error = bdrv_co_do_writev(bs, acb->req.sector,
4140 acb->req.nb_sectors, acb->req.qiov, 0);
4143 acb->bh = qemu_bh_new(bdrv_co_em_bh, acb);
4144 qemu_bh_schedule(acb->bh);
4147 static BlockDriverAIOCB *bdrv_co_aio_rw_vector(BlockDriverState *bs,
4148 int64_t sector_num,
4149 QEMUIOVector *qiov,
4150 int nb_sectors,
4151 BlockDriverCompletionFunc *cb,
4152 void *opaque,
4153 bool is_write)
4155 Coroutine *co;
4156 BlockDriverAIOCBCoroutine *acb;
4158 acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque);
4159 acb->req.sector = sector_num;
4160 acb->req.nb_sectors = nb_sectors;
4161 acb->req.qiov = qiov;
4162 acb->is_write = is_write;
4163 acb->done = NULL;
4165 co = qemu_coroutine_create(bdrv_co_do_rw);
4166 qemu_coroutine_enter(co, acb);
4168 return &acb->common;
4171 static void coroutine_fn bdrv_aio_flush_co_entry(void *opaque)
4173 BlockDriverAIOCBCoroutine *acb = opaque;
4174 BlockDriverState *bs = acb->common.bs;
4176 acb->req.error = bdrv_co_flush(bs);
4177 acb->bh = qemu_bh_new(bdrv_co_em_bh, acb);
4178 qemu_bh_schedule(acb->bh);
4181 BlockDriverAIOCB *bdrv_aio_flush(BlockDriverState *bs,
4182 BlockDriverCompletionFunc *cb, void *opaque)
4184 trace_bdrv_aio_flush(bs, opaque);
4186 Coroutine *co;
4187 BlockDriverAIOCBCoroutine *acb;
4189 acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque);
4190 acb->done = NULL;
4192 co = qemu_coroutine_create(bdrv_aio_flush_co_entry);
4193 qemu_coroutine_enter(co, acb);
4195 return &acb->common;
4198 static void coroutine_fn bdrv_aio_discard_co_entry(void *opaque)
4200 BlockDriverAIOCBCoroutine *acb = opaque;
4201 BlockDriverState *bs = acb->common.bs;
4203 acb->req.error = bdrv_co_discard(bs, acb->req.sector, acb->req.nb_sectors);
4204 acb->bh = qemu_bh_new(bdrv_co_em_bh, acb);
4205 qemu_bh_schedule(acb->bh);
4208 BlockDriverAIOCB *bdrv_aio_discard(BlockDriverState *bs,
4209 int64_t sector_num, int nb_sectors,
4210 BlockDriverCompletionFunc *cb, void *opaque)
4212 Coroutine *co;
4213 BlockDriverAIOCBCoroutine *acb;
4215 trace_bdrv_aio_discard(bs, sector_num, nb_sectors, opaque);
4217 acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque);
4218 acb->req.sector = sector_num;
4219 acb->req.nb_sectors = nb_sectors;
4220 acb->done = NULL;
4221 co = qemu_coroutine_create(bdrv_aio_discard_co_entry);
4222 qemu_coroutine_enter(co, acb);
4224 return &acb->common;
4227 void bdrv_init(void)
4229 module_call_init(MODULE_INIT_BLOCK);
4232 void bdrv_init_with_whitelist(void)
4234 use_bdrv_whitelist = 1;
4235 bdrv_init();
4238 void *qemu_aio_get(const AIOCBInfo *aiocb_info, BlockDriverState *bs,
4239 BlockDriverCompletionFunc *cb, void *opaque)
4241 BlockDriverAIOCB *acb;
4243 acb = g_slice_alloc(aiocb_info->aiocb_size);
4244 acb->aiocb_info = aiocb_info;
4245 acb->bs = bs;
4246 acb->cb = cb;
4247 acb->opaque = opaque;
4248 return acb;
4251 void qemu_aio_release(void *p)
4253 BlockDriverAIOCB *acb = p;
4254 g_slice_free1(acb->aiocb_info->aiocb_size, acb);
4257 /**************************************************************/
4258 /* Coroutine block device emulation */
4260 typedef struct CoroutineIOCompletion {
4261 Coroutine *coroutine;
4262 int ret;
4263 } CoroutineIOCompletion;
4265 static void bdrv_co_io_em_complete(void *opaque, int ret)
4267 CoroutineIOCompletion *co = opaque;
4269 co->ret = ret;
4270 qemu_coroutine_enter(co->coroutine, NULL);
4273 static int coroutine_fn bdrv_co_io_em(BlockDriverState *bs, int64_t sector_num,
4274 int nb_sectors, QEMUIOVector *iov,
4275 bool is_write)
4277 CoroutineIOCompletion co = {
4278 .coroutine = qemu_coroutine_self(),
4280 BlockDriverAIOCB *acb;
4282 if (is_write) {
4283 acb = bs->drv->bdrv_aio_writev(bs, sector_num, iov, nb_sectors,
4284 bdrv_co_io_em_complete, &co);
4285 } else {
4286 acb = bs->drv->bdrv_aio_readv(bs, sector_num, iov, nb_sectors,
4287 bdrv_co_io_em_complete, &co);
4290 trace_bdrv_co_io_em(bs, sector_num, nb_sectors, is_write, acb);
4291 if (!acb) {
4292 return -EIO;
4294 qemu_coroutine_yield();
4296 return co.ret;
4299 static int coroutine_fn bdrv_co_readv_em(BlockDriverState *bs,
4300 int64_t sector_num, int nb_sectors,
4301 QEMUIOVector *iov)
4303 return bdrv_co_io_em(bs, sector_num, nb_sectors, iov, false);
4306 static int coroutine_fn bdrv_co_writev_em(BlockDriverState *bs,
4307 int64_t sector_num, int nb_sectors,
4308 QEMUIOVector *iov)
4310 return bdrv_co_io_em(bs, sector_num, nb_sectors, iov, true);
4313 static void coroutine_fn bdrv_flush_co_entry(void *opaque)
4315 RwCo *rwco = opaque;
4317 rwco->ret = bdrv_co_flush(rwco->bs);
4320 int coroutine_fn bdrv_co_flush(BlockDriverState *bs)
4322 int ret;
4324 if (!bs || !bdrv_is_inserted(bs) || bdrv_is_read_only(bs)) {
4325 return 0;
4328 /* Write back cached data to the OS even with cache=unsafe */
4329 if (bs->drv->bdrv_co_flush_to_os) {
4330 ret = bs->drv->bdrv_co_flush_to_os(bs);
4331 if (ret < 0) {
4332 return ret;
4336 /* But don't actually force it to the disk with cache=unsafe */
4337 if (bs->open_flags & BDRV_O_NO_FLUSH) {
4338 goto flush_parent;
4341 if (bs->drv->bdrv_co_flush_to_disk) {
4342 ret = bs->drv->bdrv_co_flush_to_disk(bs);
4343 } else if (bs->drv->bdrv_aio_flush) {
4344 BlockDriverAIOCB *acb;
4345 CoroutineIOCompletion co = {
4346 .coroutine = qemu_coroutine_self(),
4349 acb = bs->drv->bdrv_aio_flush(bs, bdrv_co_io_em_complete, &co);
4350 if (acb == NULL) {
4351 ret = -EIO;
4352 } else {
4353 qemu_coroutine_yield();
4354 ret = co.ret;
4356 } else {
4358 * Some block drivers always operate in either writethrough or unsafe
4359 * mode and don't support bdrv_flush therefore. Usually qemu doesn't
4360 * know how the server works (because the behaviour is hardcoded or
4361 * depends on server-side configuration), so we can't ensure that
4362 * everything is safe on disk. Returning an error doesn't work because
4363 * that would break guests even if the server operates in writethrough
4364 * mode.
4366 * Let's hope the user knows what he's doing.
4368 ret = 0;
4370 if (ret < 0) {
4371 return ret;
4374 /* Now flush the underlying protocol. It will also have BDRV_O_NO_FLUSH
4375 * in the case of cache=unsafe, so there are no useless flushes.
4377 flush_parent:
4378 return bdrv_co_flush(bs->file);
4381 void bdrv_invalidate_cache(BlockDriverState *bs)
4383 if (bs->drv && bs->drv->bdrv_invalidate_cache) {
4384 bs->drv->bdrv_invalidate_cache(bs);
4388 void bdrv_invalidate_cache_all(void)
4390 BlockDriverState *bs;
4392 QTAILQ_FOREACH(bs, &bdrv_states, list) {
4393 bdrv_invalidate_cache(bs);
4397 void bdrv_clear_incoming_migration_all(void)
4399 BlockDriverState *bs;
4401 QTAILQ_FOREACH(bs, &bdrv_states, list) {
4402 bs->open_flags = bs->open_flags & ~(BDRV_O_INCOMING);
4406 int bdrv_flush(BlockDriverState *bs)
4408 Coroutine *co;
4409 RwCo rwco = {
4410 .bs = bs,
4411 .ret = NOT_DONE,
4414 if (qemu_in_coroutine()) {
4415 /* Fast-path if already in coroutine context */
4416 bdrv_flush_co_entry(&rwco);
4417 } else {
4418 co = qemu_coroutine_create(bdrv_flush_co_entry);
4419 qemu_coroutine_enter(co, &rwco);
4420 while (rwco.ret == NOT_DONE) {
4421 qemu_aio_wait();
4425 return rwco.ret;
4428 static void coroutine_fn bdrv_discard_co_entry(void *opaque)
4430 RwCo *rwco = opaque;
4432 rwco->ret = bdrv_co_discard(rwco->bs, rwco->sector_num, rwco->nb_sectors);
4435 int coroutine_fn bdrv_co_discard(BlockDriverState *bs, int64_t sector_num,
4436 int nb_sectors)
4438 if (!bs->drv) {
4439 return -ENOMEDIUM;
4440 } else if (bdrv_check_request(bs, sector_num, nb_sectors)) {
4441 return -EIO;
4442 } else if (bs->read_only) {
4443 return -EROFS;
4446 if (bs->dirty_bitmap) {
4447 bdrv_reset_dirty(bs, sector_num, nb_sectors);
4450 /* Do nothing if disabled. */
4451 if (!(bs->open_flags & BDRV_O_UNMAP)) {
4452 return 0;
4455 if (bs->drv->bdrv_co_discard) {
4456 return bs->drv->bdrv_co_discard(bs, sector_num, nb_sectors);
4457 } else if (bs->drv->bdrv_aio_discard) {
4458 BlockDriverAIOCB *acb;
4459 CoroutineIOCompletion co = {
4460 .coroutine = qemu_coroutine_self(),
4463 acb = bs->drv->bdrv_aio_discard(bs, sector_num, nb_sectors,
4464 bdrv_co_io_em_complete, &co);
4465 if (acb == NULL) {
4466 return -EIO;
4467 } else {
4468 qemu_coroutine_yield();
4469 return co.ret;
4471 } else {
4472 return 0;
4476 int bdrv_discard(BlockDriverState *bs, int64_t sector_num, int nb_sectors)
4478 Coroutine *co;
4479 RwCo rwco = {
4480 .bs = bs,
4481 .sector_num = sector_num,
4482 .nb_sectors = nb_sectors,
4483 .ret = NOT_DONE,
4486 if (qemu_in_coroutine()) {
4487 /* Fast-path if already in coroutine context */
4488 bdrv_discard_co_entry(&rwco);
4489 } else {
4490 co = qemu_coroutine_create(bdrv_discard_co_entry);
4491 qemu_coroutine_enter(co, &rwco);
4492 while (rwco.ret == NOT_DONE) {
4493 qemu_aio_wait();
4497 return rwco.ret;
4500 /**************************************************************/
4501 /* removable device support */
4504 * Return TRUE if the media is present
4506 int bdrv_is_inserted(BlockDriverState *bs)
4508 BlockDriver *drv = bs->drv;
4510 if (!drv)
4511 return 0;
4512 if (!drv->bdrv_is_inserted)
4513 return 1;
4514 return drv->bdrv_is_inserted(bs);
4518 * Return whether the media changed since the last call to this
4519 * function, or -ENOTSUP if we don't know. Most drivers don't know.
4521 int bdrv_media_changed(BlockDriverState *bs)
4523 BlockDriver *drv = bs->drv;
4525 if (drv && drv->bdrv_media_changed) {
4526 return drv->bdrv_media_changed(bs);
4528 return -ENOTSUP;
4532 * If eject_flag is TRUE, eject the media. Otherwise, close the tray
4534 void bdrv_eject(BlockDriverState *bs, bool eject_flag)
4536 BlockDriver *drv = bs->drv;
4538 if (drv && drv->bdrv_eject) {
4539 drv->bdrv_eject(bs, eject_flag);
4542 if (bs->device_name[0] != '\0') {
4543 bdrv_emit_qmp_eject_event(bs, eject_flag);
4548 * Lock or unlock the media (if it is locked, the user won't be able
4549 * to eject it manually).
4551 void bdrv_lock_medium(BlockDriverState *bs, bool locked)
4553 BlockDriver *drv = bs->drv;
4555 trace_bdrv_lock_medium(bs, locked);
4557 if (drv && drv->bdrv_lock_medium) {
4558 drv->bdrv_lock_medium(bs, locked);
4562 /* needed for generic scsi interface */
4564 int bdrv_ioctl(BlockDriverState *bs, unsigned long int req, void *buf)
4566 BlockDriver *drv = bs->drv;
4568 if (drv && drv->bdrv_ioctl)
4569 return drv->bdrv_ioctl(bs, req, buf);
4570 return -ENOTSUP;
4573 BlockDriverAIOCB *bdrv_aio_ioctl(BlockDriverState *bs,
4574 unsigned long int req, void *buf,
4575 BlockDriverCompletionFunc *cb, void *opaque)
4577 BlockDriver *drv = bs->drv;
4579 if (drv && drv->bdrv_aio_ioctl)
4580 return drv->bdrv_aio_ioctl(bs, req, buf, cb, opaque);
4581 return NULL;
4584 void bdrv_set_buffer_alignment(BlockDriverState *bs, int align)
4586 bs->buffer_alignment = align;
4589 void *qemu_blockalign(BlockDriverState *bs, size_t size)
4591 return qemu_memalign((bs && bs->buffer_alignment) ? bs->buffer_alignment : 512, size);
4595 * Check if all memory in this vector is sector aligned.
4597 bool bdrv_qiov_is_aligned(BlockDriverState *bs, QEMUIOVector *qiov)
4599 int i;
4601 for (i = 0; i < qiov->niov; i++) {
4602 if ((uintptr_t) qiov->iov[i].iov_base % bs->buffer_alignment) {
4603 return false;
4607 return true;
4610 void bdrv_set_dirty_tracking(BlockDriverState *bs, int granularity)
4612 int64_t bitmap_size;
4614 assert((granularity & (granularity - 1)) == 0);
4616 if (granularity) {
4617 granularity >>= BDRV_SECTOR_BITS;
4618 assert(!bs->dirty_bitmap);
4619 bitmap_size = (bdrv_getlength(bs) >> BDRV_SECTOR_BITS);
4620 bs->dirty_bitmap = hbitmap_alloc(bitmap_size, ffs(granularity) - 1);
4621 } else {
4622 if (bs->dirty_bitmap) {
4623 hbitmap_free(bs->dirty_bitmap);
4624 bs->dirty_bitmap = NULL;
4629 int bdrv_get_dirty(BlockDriverState *bs, int64_t sector)
4631 if (bs->dirty_bitmap) {
4632 return hbitmap_get(bs->dirty_bitmap, sector);
4633 } else {
4634 return 0;
4638 void bdrv_dirty_iter_init(BlockDriverState *bs, HBitmapIter *hbi)
4640 hbitmap_iter_init(hbi, bs->dirty_bitmap, 0);
4643 void bdrv_set_dirty(BlockDriverState *bs, int64_t cur_sector,
4644 int nr_sectors)
4646 hbitmap_set(bs->dirty_bitmap, cur_sector, nr_sectors);
4649 void bdrv_reset_dirty(BlockDriverState *bs, int64_t cur_sector,
4650 int nr_sectors)
4652 hbitmap_reset(bs->dirty_bitmap, cur_sector, nr_sectors);
4655 int64_t bdrv_get_dirty_count(BlockDriverState *bs)
4657 if (bs->dirty_bitmap) {
4658 return hbitmap_count(bs->dirty_bitmap);
4659 } else {
4660 return 0;
4664 void bdrv_set_in_use(BlockDriverState *bs, int in_use)
4666 assert(bs->in_use != in_use);
4667 bs->in_use = in_use;
4670 int bdrv_in_use(BlockDriverState *bs)
4672 return bs->in_use;
4675 void bdrv_iostatus_enable(BlockDriverState *bs)
4677 bs->iostatus_enabled = true;
4678 bs->iostatus = BLOCK_DEVICE_IO_STATUS_OK;
4681 /* The I/O status is only enabled if the drive explicitly
4682 * enables it _and_ the VM is configured to stop on errors */
4683 bool bdrv_iostatus_is_enabled(const BlockDriverState *bs)
4685 return (bs->iostatus_enabled &&
4686 (bs->on_write_error == BLOCKDEV_ON_ERROR_ENOSPC ||
4687 bs->on_write_error == BLOCKDEV_ON_ERROR_STOP ||
4688 bs->on_read_error == BLOCKDEV_ON_ERROR_STOP));
4691 void bdrv_iostatus_disable(BlockDriverState *bs)
4693 bs->iostatus_enabled = false;
4696 void bdrv_iostatus_reset(BlockDriverState *bs)
4698 if (bdrv_iostatus_is_enabled(bs)) {
4699 bs->iostatus = BLOCK_DEVICE_IO_STATUS_OK;
4700 if (bs->job) {
4701 block_job_iostatus_reset(bs->job);
4706 void bdrv_iostatus_set_err(BlockDriverState *bs, int error)
4708 assert(bdrv_iostatus_is_enabled(bs));
4709 if (bs->iostatus == BLOCK_DEVICE_IO_STATUS_OK) {
4710 bs->iostatus = error == ENOSPC ? BLOCK_DEVICE_IO_STATUS_NOSPACE :
4711 BLOCK_DEVICE_IO_STATUS_FAILED;
4715 void
4716 bdrv_acct_start(BlockDriverState *bs, BlockAcctCookie *cookie, int64_t bytes,
4717 enum BlockAcctType type)
4719 assert(type < BDRV_MAX_IOTYPE);
4721 cookie->bytes = bytes;
4722 cookie->start_time_ns = get_clock();
4723 cookie->type = type;
4726 void
4727 bdrv_acct_done(BlockDriverState *bs, BlockAcctCookie *cookie)
4729 assert(cookie->type < BDRV_MAX_IOTYPE);
4731 bs->nr_bytes[cookie->type] += cookie->bytes;
4732 bs->nr_ops[cookie->type]++;
4733 bs->total_time_ns[cookie->type] += get_clock() - cookie->start_time_ns;
4736 void bdrv_img_create(const char *filename, const char *fmt,
4737 const char *base_filename, const char *base_fmt,
4738 char *options, uint64_t img_size, int flags,
4739 Error **errp, bool quiet)
4741 QEMUOptionParameter *param = NULL, *create_options = NULL;
4742 QEMUOptionParameter *backing_fmt, *backing_file, *size;
4743 BlockDriverState *bs = NULL;
4744 BlockDriver *drv, *proto_drv;
4745 BlockDriver *backing_drv = NULL;
4746 int ret = 0;
4748 /* Find driver and parse its options */
4749 drv = bdrv_find_format(fmt);
4750 if (!drv) {
4751 error_setg(errp, "Unknown file format '%s'", fmt);
4752 return;
4755 proto_drv = bdrv_find_protocol(filename);
4756 if (!proto_drv) {
4757 error_setg(errp, "Unknown protocol '%s'", filename);
4758 return;
4761 create_options = append_option_parameters(create_options,
4762 drv->create_options);
4763 create_options = append_option_parameters(create_options,
4764 proto_drv->create_options);
4766 /* Create parameter list with default values */
4767 param = parse_option_parameters("", create_options, param);
4769 set_option_parameter_int(param, BLOCK_OPT_SIZE, img_size);
4771 /* Parse -o options */
4772 if (options) {
4773 param = parse_option_parameters(options, create_options, param);
4774 if (param == NULL) {
4775 error_setg(errp, "Invalid options for file format '%s'.", fmt);
4776 goto out;
4780 if (base_filename) {
4781 if (set_option_parameter(param, BLOCK_OPT_BACKING_FILE,
4782 base_filename)) {
4783 error_setg(errp, "Backing file not supported for file format '%s'",
4784 fmt);
4785 goto out;
4789 if (base_fmt) {
4790 if (set_option_parameter(param, BLOCK_OPT_BACKING_FMT, base_fmt)) {
4791 error_setg(errp, "Backing file format not supported for file "
4792 "format '%s'", fmt);
4793 goto out;
4797 backing_file = get_option_parameter(param, BLOCK_OPT_BACKING_FILE);
4798 if (backing_file && backing_file->value.s) {
4799 if (!strcmp(filename, backing_file->value.s)) {
4800 error_setg(errp, "Error: Trying to create an image with the "
4801 "same filename as the backing file");
4802 goto out;
4806 backing_fmt = get_option_parameter(param, BLOCK_OPT_BACKING_FMT);
4807 if (backing_fmt && backing_fmt->value.s) {
4808 backing_drv = bdrv_find_format(backing_fmt->value.s);
4809 if (!backing_drv) {
4810 error_setg(errp, "Unknown backing file format '%s'",
4811 backing_fmt->value.s);
4812 goto out;
4816 // The size for the image must always be specified, with one exception:
4817 // If we are using a backing file, we can obtain the size from there
4818 size = get_option_parameter(param, BLOCK_OPT_SIZE);
4819 if (size && size->value.n == -1) {
4820 if (backing_file && backing_file->value.s) {
4821 uint64_t size;
4822 char buf[32];
4823 int back_flags;
4825 /* backing files always opened read-only */
4826 back_flags =
4827 flags & ~(BDRV_O_RDWR | BDRV_O_SNAPSHOT | BDRV_O_NO_BACKING);
4829 bs = bdrv_new("");
4831 ret = bdrv_open(bs, backing_file->value.s, NULL, back_flags,
4832 backing_drv);
4833 if (ret < 0) {
4834 error_setg_errno(errp, -ret, "Could not open '%s'",
4835 backing_file->value.s);
4836 goto out;
4838 bdrv_get_geometry(bs, &size);
4839 size *= 512;
4841 snprintf(buf, sizeof(buf), "%" PRId64, size);
4842 set_option_parameter(param, BLOCK_OPT_SIZE, buf);
4843 } else {
4844 error_setg(errp, "Image creation needs a size parameter");
4845 goto out;
4849 if (!quiet) {
4850 printf("Formatting '%s', fmt=%s ", filename, fmt);
4851 print_option_parameters(param);
4852 puts("");
4854 ret = bdrv_create(drv, filename, param);
4855 if (ret < 0) {
4856 if (ret == -ENOTSUP) {
4857 error_setg(errp,"Formatting or formatting option not supported for "
4858 "file format '%s'", fmt);
4859 } else if (ret == -EFBIG) {
4860 const char *cluster_size_hint = "";
4861 if (get_option_parameter(create_options, BLOCK_OPT_CLUSTER_SIZE)) {
4862 cluster_size_hint = " (try using a larger cluster size)";
4864 error_setg(errp, "The image size is too large for file format '%s'%s",
4865 fmt, cluster_size_hint);
4866 } else {
4867 error_setg(errp, "%s: error while creating %s: %s", filename, fmt,
4868 strerror(-ret));
4872 out:
4873 free_option_parameters(create_options);
4874 free_option_parameters(param);
4876 if (bs) {
4877 bdrv_delete(bs);
4881 AioContext *bdrv_get_aio_context(BlockDriverState *bs)
4883 /* Currently BlockDriverState always uses the main loop AioContext */
4884 return qemu_get_aio_context();