hw/char/escc.c

   1 /*
   2  * QEMU ESCC (Z8030/Z8530/Z85C30/SCC/ESCC) serial port emulation
   3  *
   4  * Copyright (c) 2003-2005 Fabrice Bellard
   5  *
   6  * Permission is hereby granted, free of charge, to any person obtaining a copy
   7  * of this software and associated documentation files (the "Software"), to deal
   8  * in the Software without restriction, including without limitation the rights
   9  * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
  10  * copies of the Software, and to permit persons to whom the Software is
  11  * furnished to do so, subject to the following conditions:
  12  *
  13  * The above copyright notice and this permission notice shall be included in
  14  * all copies or substantial portions of the Software.
  15  *
  16  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  17  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  18  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
  19  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  20  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
  21  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
  22  * THE SOFTWARE.
  23  */
  24
  25 #include "hw/hw.h"
  26 #include "hw/sysbus.h"
  27 #include "hw/char/escc.h"
  28 #include "sysemu/char.h"
  29 #include "ui/console.h"
  30 #include "ui/input.h"
  31 #include "trace.h"
  32
  33 /*
  34  * Chipset docs:
  35  * "Z80C30/Z85C30/Z80230/Z85230/Z85233 SCC/ESCC User Manual",
  36  * http://www.zilog.com/docs/serial/scc_escc_um.pdf
  37  *
  38  * On Sparc32 this is the serial port, mouse and keyboard part of chip STP2001
  39  * (Slave I/O), also produced as NCR89C105. See
  40  * http://www.ibiblio.org/pub/historic-linux/early-ports/Sparc/NCR/NCR89C105.txt
  41  *
  42  * The serial ports implement full AMD AM8530 or Zilog Z8530 chips,
  43  * mouse and keyboard ports don't implement all functions and they are
  44  * only asynchronous. There is no DMA.
  45  *
  46  * Z85C30 is also used on PowerMacs. There are some small differences
  47  * between Sparc version (sunzilog) and PowerMac (pmac):
  48  *  Offset between control and data registers
  49  *  There is some kind of lockup bug, but we can ignore it
  50  *  CTS is inverted
  51  *  DMA on pmac using DBDMA chip
  52  *  pmac can do IRDA and faster rates, sunzilog can only do 38400
  53  *  pmac baud rate generator clock is 3.6864 MHz, sunzilog 4.9152 MHz
  54  */
  55
  56 /*
  57  * Modifications:
  58  *  2006-Aug-10  Igor Kovalenko :   Renamed KBDQueue to SERIOQueue, implemented
  59  *                                  serial mouse queue.
  60  *                                  Implemented serial mouse protocol.
  61  *
  62  *  2010-May-23  Artyom Tarasenko:  Reworked IUS logic
  63  */
  64
  65 typedef enum {
  66     chn_a, chn_b,
  67 } ChnID;
  68
  69 #define CHN_C(s) ((s)->chn == chn_b? 'b' : 'a')
  70
  71 typedef enum {
  72     ser, kbd, mouse,
  73 } ChnType;
  74
  75 #define SERIO_QUEUE_SIZE 256
  76
  77 typedef struct {
  78     uint8_t data[SERIO_QUEUE_SIZE];
  79     int rptr, wptr, count;
  80 } SERIOQueue;
  81
  82 #define SERIAL_REGS 16
  83 typedef struct ChannelState {
  84     qemu_irq irq;
  85     uint32_t rxint, txint, rxint_under_svc, txint_under_svc;
  86     struct ChannelState *otherchn;
  87     uint32_t reg;
  88     uint8_t wregs[SERIAL_REGS], rregs[SERIAL_REGS];
  89     SERIOQueue queue;
  90     CharDriverState *chr;
  91     int e0_mode, led_mode, caps_lock_mode, num_lock_mode;
  92     int disabled;
  93     int clock;
  94     uint32_t vmstate_dummy;
  95     ChnID chn; // this channel, A (base+4) or B (base+0)
  96     ChnType type;
  97     uint8_t rx, tx;
  98     QemuInputHandlerState *hs;
  99 } ChannelState;
 100
 101 #define ESCC(obj) OBJECT_CHECK(ESCCState, (obj), TYPE_ESCC)
 102
 103 typedef struct ESCCState {
 104     SysBusDevice parent_obj;
 105
 106     struct ChannelState chn[2];
 107     uint32_t it_shift;
 108     MemoryRegion mmio;
 109     uint32_t disabled;
 110     uint32_t frequency;
 111 } ESCCState;
 112
 113 #define SERIAL_CTRL 0
 114 #define SERIAL_DATA 1
 115
 116 #define W_CMD     0
 117 #define CMD_PTR_MASK   0x07
 118 #define CMD_CMD_MASK   0x38
 119 #define CMD_HI         0x08
 120 #define CMD_CLR_TXINT  0x28
 121 #define CMD_CLR_IUS    0x38
 122 #define W_INTR    1
 123 #define INTR_INTALL    0x01
 124 #define INTR_TXINT     0x02
 125 #define INTR_RXMODEMSK 0x18
 126 #define INTR_RXINT1ST  0x08
 127 #define INTR_RXINTALL  0x10
 128 #define W_IVEC    2
 129 #define W_RXCTRL  3
 130 #define RXCTRL_RXEN    0x01
 131 #define W_TXCTRL1 4
 132 #define TXCTRL1_PAREN  0x01
 133 #define TXCTRL1_PAREV  0x02
 134 #define TXCTRL1_1STOP  0x04
 135 #define TXCTRL1_1HSTOP 0x08
 136 #define TXCTRL1_2STOP  0x0c
 137 #define TXCTRL1_STPMSK 0x0c
 138 #define TXCTRL1_CLK1X  0x00
 139 #define TXCTRL1_CLK16X 0x40
 140 #define TXCTRL1_CLK32X 0x80
 141 #define TXCTRL1_CLK64X 0xc0
 142 #define TXCTRL1_CLKMSK 0xc0
 143 #define W_TXCTRL2 5
 144 #define TXCTRL2_TXEN   0x08
 145 #define TXCTRL2_BITMSK 0x60
 146 #define TXCTRL2_5BITS  0x00
 147 #define TXCTRL2_7BITS  0x20
 148 #define TXCTRL2_6BITS  0x40
 149 #define TXCTRL2_8BITS  0x60
 150 #define W_SYNC1   6
 151 #define W_SYNC2   7
 152 #define W_TXBUF   8
 153 #define W_MINTR   9
 154 #define MINTR_STATUSHI 0x10
 155 #define MINTR_RST_MASK 0xc0
 156 #define MINTR_RST_B    0x40
 157 #define MINTR_RST_A    0x80
 158 #define MINTR_RST_ALL  0xc0
 159 #define W_MISC1  10
 160 #define W_CLOCK  11
 161 #define CLOCK_TRXC     0x08
 162 #define W_BRGLO  12
 163 #define W_BRGHI  13
 164 #define W_MISC2  14
 165 #define MISC2_PLLDIS   0x30
 166 #define W_EXTINT 15
 167 #define EXTINT_DCD     0x08
 168 #define EXTINT_SYNCINT 0x10
 169 #define EXTINT_CTSINT  0x20
 170 #define EXTINT_TXUNDRN 0x40
 171 #define EXTINT_BRKINT  0x80
 172
 173 #define R_STATUS  0
 174 #define STATUS_RXAV    0x01
 175 #define STATUS_ZERO    0x02
 176 #define STATUS_TXEMPTY 0x04
 177 #define STATUS_DCD     0x08
 178 #define STATUS_SYNC    0x10
 179 #define STATUS_CTS     0x20
 180 #define STATUS_TXUNDRN 0x40
 181 #define STATUS_BRK     0x80
 182 #define R_SPEC    1
 183 #define SPEC_ALLSENT   0x01
 184 #define SPEC_BITS8     0x06
 185 #define R_IVEC    2
 186 #define IVEC_TXINTB    0x00
 187 #define IVEC_LONOINT   0x06
 188 #define IVEC_LORXINTA  0x0c
 189 #define IVEC_LORXINTB  0x04
 190 #define IVEC_LOTXINTA  0x08
 191 #define IVEC_HINOINT   0x60
 192 #define IVEC_HIRXINTA  0x30
 193 #define IVEC_HIRXINTB  0x20
 194 #define IVEC_HITXINTA  0x10
 195 #define R_INTR    3
 196 #define INTR_EXTINTB   0x01
 197 #define INTR_TXINTB    0x02
 198 #define INTR_RXINTB    0x04
 199 #define INTR_EXTINTA   0x08
 200 #define INTR_TXINTA    0x10
 201 #define INTR_RXINTA    0x20
 202 #define R_IPEN    4
 203 #define R_TXCTRL1 5
 204 #define R_TXCTRL2 6
 205 #define R_BC      7
 206 #define R_RXBUF   8
 207 #define R_RXCTRL  9
 208 #define R_MISC   10
 209 #define R_MISC1  11
 210 #define R_BRGLO  12
 211 #define R_BRGHI  13
 212 #define R_MISC1I 14
 213 #define R_EXTINT 15
 214
 215 static void handle_kbd_command(ChannelState *s, int val);
 216 static int serial_can_receive(void *opaque);
 217 static void serial_receive_byte(ChannelState *s, int ch);
 218
 219 static void clear_queue(void *opaque)
 220 {
 221     ChannelState *s = opaque;
 222     SERIOQueue *q = &s->queue;
 223     q->rptr = q->wptr = q->count = 0;
 224 }
 225
 226 static void put_queue(void *opaque, int b)
 227 {
 228     ChannelState *s = opaque;
 229     SERIOQueue *q = &s->queue;
 230
 231     trace_escc_put_queue(CHN_C(s), b);
 232     if (q->count >= SERIO_QUEUE_SIZE)
 233         return;
 234     q->data[q->wptr] = b;
 235     if (++q->wptr == SERIO_QUEUE_SIZE)
 236         q->wptr = 0;
 237     q->count++;
 238     serial_receive_byte(s, 0);
 239 }
 240
 241 static uint32_t get_queue(void *opaque)
 242 {
 243     ChannelState *s = opaque;
 244     SERIOQueue *q = &s->queue;
 245     int val;
 246
 247     if (q->count == 0) {
 248         return 0;
 249     } else {
 250         val = q->data[q->rptr];
 251         if (++q->rptr == SERIO_QUEUE_SIZE)
 252             q->rptr = 0;
 253         q->count--;
 254     }
 255     trace_escc_get_queue(CHN_C(s), val);
 256     if (q->count > 0)
 257         serial_receive_byte(s, 0);
 258     return val;
 259 }
 260
 261 static int escc_update_irq_chn(ChannelState *s)
 262 {
 263     if ((((s->wregs[W_INTR] & INTR_TXINT) && (s->txint == 1)) ||
 264          // tx ints enabled, pending
 265          ((((s->wregs[W_INTR] & INTR_RXMODEMSK) == INTR_RXINT1ST) ||
 266            ((s->wregs[W_INTR] & INTR_RXMODEMSK) == INTR_RXINTALL)) &&
 267           s->rxint == 1) || // rx ints enabled, pending
 268          ((s->wregs[W_EXTINT] & EXTINT_BRKINT) &&
 269           (s->rregs[R_STATUS] & STATUS_BRK)))) { // break int e&p
 270         return 1;
 271     }
 272     return 0;
 273 }
 274
 275 static void escc_update_irq(ChannelState *s)
 276 {
 277     int irq;
 278
 279     irq = escc_update_irq_chn(s);
 280     irq |= escc_update_irq_chn(s->otherchn);
 281
 282     trace_escc_update_irq(irq);
 283     qemu_set_irq(s->irq, irq);
 284 }
 285
 286 static void escc_reset_chn(ChannelState *s)
 287 {
 288     int i;
 289
 290     s->reg = 0;
 291     for (i = 0; i < SERIAL_REGS; i++) {
 292         s->rregs[i] = 0;
 293         s->wregs[i] = 0;
 294     }
 295     s->wregs[W_TXCTRL1] = TXCTRL1_1STOP; // 1X divisor, 1 stop bit, no parity
 296     s->wregs[W_MINTR] = MINTR_RST_ALL;
 297     s->wregs[W_CLOCK] = CLOCK_TRXC; // Synch mode tx clock = TRxC
 298     s->wregs[W_MISC2] = MISC2_PLLDIS; // PLL disabled
 299     s->wregs[W_EXTINT] = EXTINT_DCD | EXTINT_SYNCINT | EXTINT_CTSINT |
 300         EXTINT_TXUNDRN | EXTINT_BRKINT; // Enable most interrupts
 301     if (s->disabled)
 302         s->rregs[R_STATUS] = STATUS_TXEMPTY | STATUS_DCD | STATUS_SYNC |
 303             STATUS_CTS | STATUS_TXUNDRN;
 304     else
 305         s->rregs[R_STATUS] = STATUS_TXEMPTY | STATUS_TXUNDRN;
 306     s->rregs[R_SPEC] = SPEC_BITS8 | SPEC_ALLSENT;
 307
 308     s->rx = s->tx = 0;
 309     s->rxint = s->txint = 0;
 310     s->rxint_under_svc = s->txint_under_svc = 0;
 311     s->e0_mode = s->led_mode = s->caps_lock_mode = s->num_lock_mode = 0;
 312     clear_queue(s);
 313 }
 314
 315 static void escc_reset(DeviceState *d)
 316 {
 317     ESCCState *s = ESCC(d);
 318
 319     escc_reset_chn(&s->chn[0]);
 320     escc_reset_chn(&s->chn[1]);
 321 }
 322
 323 static inline void set_rxint(ChannelState *s)
 324 {
 325     s->rxint = 1;
 326     /* XXX: missing daisy chainnig: chn_b rx should have a lower priority
 327        than chn_a rx/tx/special_condition service*/
 328     s->rxint_under_svc = 1;
 329     if (s->chn == chn_a) {
 330         s->rregs[R_INTR] |= INTR_RXINTA;
 331         if (s->wregs[W_MINTR] & MINTR_STATUSHI)
 332             s->otherchn->rregs[R_IVEC] = IVEC_HIRXINTA;
 333         else
 334             s->otherchn->rregs[R_IVEC] = IVEC_LORXINTA;
 335     } else {
 336         s->otherchn->rregs[R_INTR] |= INTR_RXINTB;
 337         if (s->wregs[W_MINTR] & MINTR_STATUSHI)
 338             s->rregs[R_IVEC] = IVEC_HIRXINTB;
 339         else
 340             s->rregs[R_IVEC] = IVEC_LORXINTB;
 341     }
 342     escc_update_irq(s);
 343 }
 344
 345 static inline void set_txint(ChannelState *s)
 346 {
 347     s->txint = 1;
 348     if (!s->rxint_under_svc) {
 349         s->txint_under_svc = 1;
 350         if (s->chn == chn_a) {
 351             if (s->wregs[W_INTR] & INTR_TXINT) {
 352                 s->rregs[R_INTR] |= INTR_TXINTA;
 353             }
 354             if (s->wregs[W_MINTR] & MINTR_STATUSHI)
 355                 s->otherchn->rregs[R_IVEC] = IVEC_HITXINTA;
 356             else
 357                 s->otherchn->rregs[R_IVEC] = IVEC_LOTXINTA;
 358         } else {
 359             s->rregs[R_IVEC] = IVEC_TXINTB;
 360             if (s->wregs[W_INTR] & INTR_TXINT) {
 361                 s->otherchn->rregs[R_INTR] |= INTR_TXINTB;
 362             }
 363         }
 364     escc_update_irq(s);
 365     }
 366 }
 367
 368 static inline void clr_rxint(ChannelState *s)
 369 {
 370     s->rxint = 0;
 371     s->rxint_under_svc = 0;
 372     if (s->chn == chn_a) {
 373         if (s->wregs[W_MINTR] & MINTR_STATUSHI)
 374             s->otherchn->rregs[R_IVEC] = IVEC_HINOINT;
 375         else
 376             s->otherchn->rregs[R_IVEC] = IVEC_LONOINT;
 377         s->rregs[R_INTR] &= ~INTR_RXINTA;
 378     } else {
 379         if (s->wregs[W_MINTR] & MINTR_STATUSHI)
 380             s->rregs[R_IVEC] = IVEC_HINOINT;
 381         else
 382             s->rregs[R_IVEC] = IVEC_LONOINT;
 383         s->otherchn->rregs[R_INTR] &= ~INTR_RXINTB;
 384     }
 385     if (s->txint)
 386         set_txint(s);
 387     escc_update_irq(s);
 388 }
 389
 390 static inline void clr_txint(ChannelState *s)
 391 {
 392     s->txint = 0;
 393     s->txint_under_svc = 0;
 394     if (s->chn == chn_a) {
 395         if (s->wregs[W_MINTR] & MINTR_STATUSHI)
 396             s->otherchn->rregs[R_IVEC] = IVEC_HINOINT;
 397         else
 398             s->otherchn->rregs[R_IVEC] = IVEC_LONOINT;
 399         s->rregs[R_INTR] &= ~INTR_TXINTA;
 400     } else {
 401         s->otherchn->rregs[R_INTR] &= ~INTR_TXINTB;
 402         if (s->wregs[W_MINTR] & MINTR_STATUSHI)
 403             s->rregs[R_IVEC] = IVEC_HINOINT;
 404         else
 405             s->rregs[R_IVEC] = IVEC_LONOINT;
 406         s->otherchn->rregs[R_INTR] &= ~INTR_TXINTB;
 407     }
 408     if (s->rxint)
 409         set_rxint(s);
 410     escc_update_irq(s);
 411 }
 412
 413 static void escc_update_parameters(ChannelState *s)
 414 {
 415     int speed, parity, data_bits, stop_bits;
 416     QEMUSerialSetParams ssp;
 417
 418     if (!s->chr || s->type != ser)
 419         return;
 420
 421     if (s->wregs[W_TXCTRL1] & TXCTRL1_PAREN) {
 422         if (s->wregs[W_TXCTRL1] & TXCTRL1_PAREV)
 423             parity = 'E';
 424         else
 425             parity = 'O';
 426     } else {
 427         parity = 'N';
 428     }
 429     if ((s->wregs[W_TXCTRL1] & TXCTRL1_STPMSK) == TXCTRL1_2STOP)
 430         stop_bits = 2;
 431     else
 432         stop_bits = 1;
 433     switch (s->wregs[W_TXCTRL2] & TXCTRL2_BITMSK) {
 434     case TXCTRL2_5BITS:
 435         data_bits = 5;
 436         break;
 437     case TXCTRL2_7BITS:
 438         data_bits = 7;
 439         break;
 440     case TXCTRL2_6BITS:
 441         data_bits = 6;
 442         break;
 443     default:
 444     case TXCTRL2_8BITS:
 445         data_bits = 8;
 446         break;
 447     }
 448     speed = s->clock / ((s->wregs[W_BRGLO] | (s->wregs[W_BRGHI] << 8)) + 2);
 449     switch (s->wregs[W_TXCTRL1] & TXCTRL1_CLKMSK) {
 450     case TXCTRL1_CLK1X:
 451         break;
 452     case TXCTRL1_CLK16X:
 453         speed /= 16;
 454         break;
 455     case TXCTRL1_CLK32X:
 456         speed /= 32;
 457         break;
 458     default:
 459     case TXCTRL1_CLK64X:
 460         speed /= 64;
 461         break;
 462     }
 463     ssp.speed = speed;
 464     ssp.parity = parity;
 465     ssp.data_bits = data_bits;
 466     ssp.stop_bits = stop_bits;
 467     trace_escc_update_parameters(CHN_C(s), speed, parity, data_bits, stop_bits);
 468     qemu_chr_fe_ioctl(s->chr, CHR_IOCTL_SERIAL_SET_PARAMS, &ssp);
 469 }
 470
 471 static void escc_mem_write(void *opaque, hwaddr addr,
 472                            uint64_t val, unsigned size)
 473 {
 474     ESCCState *serial = opaque;
 475     ChannelState *s;
 476     uint32_t saddr;
 477     int newreg, channel;
 478
 479     val &= 0xff;
 480     saddr = (addr >> serial->it_shift) & 1;
 481     channel = (addr >> (serial->it_shift + 1)) & 1;
 482     s = &serial->chn[channel];
 483     switch (saddr) {
 484     case SERIAL_CTRL:
 485         trace_escc_mem_writeb_ctrl(CHN_C(s), s->reg, val & 0xff);
 486         newreg = 0;
 487         switch (s->reg) {
 488         case W_CMD:
 489             newreg = val & CMD_PTR_MASK;
 490             val &= CMD_CMD_MASK;
 491             switch (val) {
 492             case CMD_HI:
 493                 newreg |= CMD_HI;
 494                 break;
 495             case CMD_CLR_TXINT:
 496                 clr_txint(s);
 497                 break;
 498             case CMD_CLR_IUS:
 499                 if (s->rxint_under_svc) {
 500                     s->rxint_under_svc = 0;
 501                     if (s->txint) {
 502                         set_txint(s);
 503                     }
 504                 } else if (s->txint_under_svc) {
 505                     s->txint_under_svc = 0;
 506                 }
 507                 escc_update_irq(s);
 508                 break;
 509             default:
 510                 break;
 511             }
 512             break;
 513         case W_INTR ... W_RXCTRL:
 514         case W_SYNC1 ... W_TXBUF:
 515         case W_MISC1 ... W_CLOCK:
 516         case W_MISC2 ... W_EXTINT:
 517             s->wregs[s->reg] = val;
 518             break;
 519         case W_TXCTRL1:
 520         case W_TXCTRL2:
 521             s->wregs[s->reg] = val;
 522             escc_update_parameters(s);
 523             break;
 524         case W_BRGLO:
 525         case W_BRGHI:
 526             s->wregs[s->reg] = val;
 527             s->rregs[s->reg] = val;
 528             escc_update_parameters(s);
 529             break;
 530         case W_MINTR:
 531             switch (val & MINTR_RST_MASK) {
 532             case 0:
 533             default:
 534                 break;
 535             case MINTR_RST_B:
 536                 escc_reset_chn(&serial->chn[0]);
 537                 return;
 538             case MINTR_RST_A:
 539                 escc_reset_chn(&serial->chn[1]);
 540                 return;
 541             case MINTR_RST_ALL:
 542                 escc_reset(DEVICE(serial));
 543                 return;
 544             }
 545             break;
 546         default:
 547             break;
 548         }
 549         if (s->reg == 0)
 550             s->reg = newreg;
 551         else
 552             s->reg = 0;
 553         break;
 554     case SERIAL_DATA:
 555         trace_escc_mem_writeb_data(CHN_C(s), val);
 556         s->tx = val;
 557         if (s->wregs[W_TXCTRL2] & TXCTRL2_TXEN) { // tx enabled
 558             if (s->chr)
 559                 qemu_chr_fe_write(s->chr, &s->tx, 1);
 560             else if (s->type == kbd && !s->disabled) {
 561                 handle_kbd_command(s, val);
 562             }
 563         }
 564         s->rregs[R_STATUS] |= STATUS_TXEMPTY; // Tx buffer empty
 565         s->rregs[R_SPEC] |= SPEC_ALLSENT; // All sent
 566         set_txint(s);
 567         break;
 568     default:
 569         break;
 570     }
 571 }
 572
 573 static uint64_t escc_mem_read(void *opaque, hwaddr addr,
 574                               unsigned size)
 575 {
 576     ESCCState *serial = opaque;
 577     ChannelState *s;
 578     uint32_t saddr;
 579     uint32_t ret;
 580     int channel;
 581
 582     saddr = (addr >> serial->it_shift) & 1;
 583     channel = (addr >> (serial->it_shift + 1)) & 1;
 584     s = &serial->chn[channel];
 585     switch (saddr) {
 586     case SERIAL_CTRL:
 587         trace_escc_mem_readb_ctrl(CHN_C(s), s->reg, s->rregs[s->reg]);
 588         ret = s->rregs[s->reg];
 589         s->reg = 0;
 590         return ret;
 591     case SERIAL_DATA:
 592         s->rregs[R_STATUS] &= ~STATUS_RXAV;
 593         clr_rxint(s);
 594         if (s->type == kbd || s->type == mouse)
 595             ret = get_queue(s);
 596         else
 597             ret = s->rx;
 598         trace_escc_mem_readb_data(CHN_C(s), ret);
 599         if (s->chr)
 600             qemu_chr_accept_input(s->chr);
 601         return ret;
 602     default:
 603         break;
 604     }
 605     return 0;
 606 }
 607
 608 static const MemoryRegionOps escc_mem_ops = {
 609     .read = escc_mem_read,
 610     .write = escc_mem_write,
 611     .endianness = DEVICE_NATIVE_ENDIAN,
 612     .valid = {
 613         .min_access_size = 1,
 614         .max_access_size = 1,
 615     },
 616 };
 617
 618 static int serial_can_receive(void *opaque)
 619 {
 620     ChannelState *s = opaque;
 621     int ret;
 622
 623     if (((s->wregs[W_RXCTRL] & RXCTRL_RXEN) == 0) // Rx not enabled
 624         || ((s->rregs[R_STATUS] & STATUS_RXAV) == STATUS_RXAV))
 625         // char already available
 626         ret = 0;
 627     else
 628         ret = 1;
 629     return ret;
 630 }
 631
 632 static void serial_receive_byte(ChannelState *s, int ch)
 633 {
 634     trace_escc_serial_receive_byte(CHN_C(s), ch);
 635     s->rregs[R_STATUS] |= STATUS_RXAV;
 636     s->rx = ch;
 637     set_rxint(s);
 638 }
 639
 640 static void serial_receive_break(ChannelState *s)
 641 {
 642     s->rregs[R_STATUS] |= STATUS_BRK;
 643     escc_update_irq(s);
 644 }
 645
 646 static void serial_receive1(void *opaque, const uint8_t *buf, int size)
 647 {
 648     ChannelState *s = opaque;
 649     serial_receive_byte(s, buf[0]);
 650 }
 651
 652 static void serial_event(void *opaque, int event)
 653 {
 654     ChannelState *s = opaque;
 655     if (event == CHR_EVENT_BREAK)
 656         serial_receive_break(s);
 657 }
 658
 659 static const VMStateDescription vmstate_escc_chn = {
 660     .name ="escc_chn",
 661     .version_id = 2,
 662     .minimum_version_id = 1,
 663     .fields = (VMStateField[]) {
 664         VMSTATE_UINT32(vmstate_dummy, ChannelState),
 665         VMSTATE_UINT32(reg, ChannelState),
 666         VMSTATE_UINT32(rxint, ChannelState),
 667         VMSTATE_UINT32(txint, ChannelState),
 668         VMSTATE_UINT32(rxint_under_svc, ChannelState),
 669         VMSTATE_UINT32(txint_under_svc, ChannelState),
 670         VMSTATE_UINT8(rx, ChannelState),
 671         VMSTATE_UINT8(tx, ChannelState),
 672         VMSTATE_BUFFER(wregs, ChannelState),
 673         VMSTATE_BUFFER(rregs, ChannelState),
 674         VMSTATE_END_OF_LIST()
 675     }
 676 };
 677
 678 static const VMStateDescription vmstate_escc = {
 679     .name ="escc",
 680     .version_id = 2,
 681     .minimum_version_id = 1,
 682     .fields = (VMStateField[]) {
 683         VMSTATE_STRUCT_ARRAY(chn, ESCCState, 2, 2, vmstate_escc_chn,
 684                              ChannelState),
 685         VMSTATE_END_OF_LIST()
 686     }
 687 };
 688
 689 MemoryRegion *escc_init(hwaddr base, qemu_irq irqA, qemu_irq irqB,
 690               CharDriverState *chrA, CharDriverState *chrB,
 691               int clock, int it_shift)
 692 {
 693     DeviceState *dev;
 694     SysBusDevice *s;
 695     ESCCState *d;
 696
 697     dev = qdev_create(NULL, TYPE_ESCC);
 698     qdev_prop_set_uint32(dev, "disabled", 0);
 699     qdev_prop_set_uint32(dev, "frequency", clock);
 700     qdev_prop_set_uint32(dev, "it_shift", it_shift);
 701     qdev_prop_set_chr(dev, "chrB", chrB);
 702     qdev_prop_set_chr(dev, "chrA", chrA);
 703     qdev_prop_set_uint32(dev, "chnBtype", ser);
 704     qdev_prop_set_uint32(dev, "chnAtype", ser);
 705     qdev_init_nofail(dev);
 706     s = SYS_BUS_DEVICE(dev);
 707     sysbus_connect_irq(s, 0, irqB);
 708     sysbus_connect_irq(s, 1, irqA);
 709     if (base) {
 710         sysbus_mmio_map(s, 0, base);
 711     }
 712
 713     d = ESCC(s);
 714     return &d->mmio;
 715 }
 716
 717 static const uint8_t qcode_to_keycode[Q_KEY_CODE__MAX] = {
 718     [Q_KEY_CODE_SHIFT]         = 99,
 719     [Q_KEY_CODE_SHIFT_R]       = 110,
 720     [Q_KEY_CODE_ALT]           = 19,
 721     [Q_KEY_CODE_ALT_R]         = 13,
 722     [Q_KEY_CODE_ALTGR]         = 13,
 723     [Q_KEY_CODE_CTRL]          = 76,
 724     [Q_KEY_CODE_CTRL_R]        = 76,
 725     [Q_KEY_CODE_ESC]           = 29,
 726     [Q_KEY_CODE_1]             = 30,
 727     [Q_KEY_CODE_2]             = 31,
 728     [Q_KEY_CODE_3]             = 32,
 729     [Q_KEY_CODE_4]             = 33,
 730     [Q_KEY_CODE_5]             = 34,
 731     [Q_KEY_CODE_6]             = 35,
 732     [Q_KEY_CODE_7]             = 36,
 733     [Q_KEY_CODE_8]             = 37,
 734     [Q_KEY_CODE_9]             = 38,
 735     [Q_KEY_CODE_0]             = 39,
 736     [Q_KEY_CODE_MINUS]         = 40,
 737     [Q_KEY_CODE_EQUAL]         = 41,
 738     [Q_KEY_CODE_BACKSPACE]     = 43,
 739     [Q_KEY_CODE_TAB]           = 53,
 740     [Q_KEY_CODE_Q]             = 54,
 741     [Q_KEY_CODE_W]             = 55,
 742     [Q_KEY_CODE_E]             = 56,
 743     [Q_KEY_CODE_R]             = 57,
 744     [Q_KEY_CODE_T]             = 58,
 745     [Q_KEY_CODE_Y]             = 59,
 746     [Q_KEY_CODE_U]             = 60,
 747     [Q_KEY_CODE_I]             = 61,
 748     [Q_KEY_CODE_O]             = 62,
 749     [Q_KEY_CODE_P]             = 63,
 750     [Q_KEY_CODE_BRACKET_LEFT]  = 64,
 751     [Q_KEY_CODE_BRACKET_RIGHT] = 65,
 752     [Q_KEY_CODE_RET]           = 89,
 753     [Q_KEY_CODE_A]             = 77,
 754     [Q_KEY_CODE_S]             = 78,
 755     [Q_KEY_CODE_D]             = 79,
 756     [Q_KEY_CODE_F]             = 80,
 757     [Q_KEY_CODE_G]             = 81,
 758     [Q_KEY_CODE_H]             = 82,
 759     [Q_KEY_CODE_J]             = 83,
 760     [Q_KEY_CODE_K]             = 84,
 761     [Q_KEY_CODE_L]             = 85,
 762     [Q_KEY_CODE_SEMICOLON]     = 86,
 763     [Q_KEY_CODE_APOSTROPHE]    = 87,
 764     [Q_KEY_CODE_GRAVE_ACCENT]  = 42,
 765     [Q_KEY_CODE_BACKSLASH]     = 88,
 766     [Q_KEY_CODE_Z]             = 100,
 767     [Q_KEY_CODE_X]             = 101,
 768     [Q_KEY_CODE_C]             = 102,
 769     [Q_KEY_CODE_V]             = 103,
 770     [Q_KEY_CODE_B]             = 104,
 771     [Q_KEY_CODE_N]             = 105,
 772     [Q_KEY_CODE_M]             = 106,
 773     [Q_KEY_CODE_COMMA]         = 107,
 774     [Q_KEY_CODE_DOT]           = 108,
 775     [Q_KEY_CODE_SLASH]         = 109,
 776     [Q_KEY_CODE_ASTERISK]      = 47,
 777     [Q_KEY_CODE_SPC]           = 121,
 778     [Q_KEY_CODE_CAPS_LOCK]     = 119,
 779     [Q_KEY_CODE_F1]            = 5,
 780     [Q_KEY_CODE_F2]            = 6,
 781     [Q_KEY_CODE_F3]            = 8,
 782     [Q_KEY_CODE_F4]            = 10,
 783     [Q_KEY_CODE_F5]            = 12,
 784     [Q_KEY_CODE_F6]            = 14,
 785     [Q_KEY_CODE_F7]            = 16,
 786     [Q_KEY_CODE_F8]            = 17,
 787     [Q_KEY_CODE_F9]            = 18,
 788     [Q_KEY_CODE_F10]           = 7,
 789     [Q_KEY_CODE_NUM_LOCK]      = 98,
 790     [Q_KEY_CODE_SCROLL_LOCK]   = 23,
 791     [Q_KEY_CODE_KP_DIVIDE]     = 46,
 792     [Q_KEY_CODE_KP_MULTIPLY]   = 47,
 793     [Q_KEY_CODE_KP_SUBTRACT]   = 71,
 794     [Q_KEY_CODE_KP_ADD]        = 125,
 795     [Q_KEY_CODE_KP_ENTER]      = 90,
 796     [Q_KEY_CODE_KP_DECIMAL]    = 50,
 797     [Q_KEY_CODE_KP_0]          = 94,
 798     [Q_KEY_CODE_KP_1]          = 112,
 799     [Q_KEY_CODE_KP_2]          = 113,
 800     [Q_KEY_CODE_KP_3]          = 114,
 801     [Q_KEY_CODE_KP_4]          = 91,
 802     [Q_KEY_CODE_KP_5]          = 92,
 803     [Q_KEY_CODE_KP_6]          = 93,
 804     [Q_KEY_CODE_KP_7]          = 68,
 805     [Q_KEY_CODE_KP_8]          = 69,
 806     [Q_KEY_CODE_KP_9]          = 70,
 807     [Q_KEY_CODE_LESS]          = 124,
 808     [Q_KEY_CODE_F11]           = 9,
 809     [Q_KEY_CODE_F12]           = 11,
 810     [Q_KEY_CODE_HOME]          = 52,
 811     [Q_KEY_CODE_PGUP]          = 96,
 812     [Q_KEY_CODE_PGDN]          = 123,
 813     [Q_KEY_CODE_END]           = 74,
 814     [Q_KEY_CODE_LEFT]          = 24,
 815     [Q_KEY_CODE_UP]            = 20,
 816     [Q_KEY_CODE_DOWN]          = 27,
 817     [Q_KEY_CODE_RIGHT]         = 28,
 818     [Q_KEY_CODE_INSERT]        = 44,
 819     [Q_KEY_CODE_DELETE]        = 66,
 820     [Q_KEY_CODE_STOP]          = 1,
 821     [Q_KEY_CODE_AGAIN]         = 3,
 822     [Q_KEY_CODE_PROPS]         = 25,
 823     [Q_KEY_CODE_UNDO]          = 26,
 824     [Q_KEY_CODE_FRONT]         = 49,
 825     [Q_KEY_CODE_COPY]          = 51,
 826     [Q_KEY_CODE_OPEN]          = 72,
 827     [Q_KEY_CODE_PASTE]         = 73,
 828     [Q_KEY_CODE_FIND]          = 95,
 829     [Q_KEY_CODE_CUT]           = 97,
 830     [Q_KEY_CODE_LF]            = 111,
 831     [Q_KEY_CODE_HELP]          = 118,
 832     [Q_KEY_CODE_META_L]        = 120,
 833     [Q_KEY_CODE_META_R]        = 122,
 834     [Q_KEY_CODE_COMPOSE]       = 67,
 835     [Q_KEY_CODE_PRINT]         = 22,
 836     [Q_KEY_CODE_SYSRQ]         = 21,
 837 };
 838
 839 static void sunkbd_handle_event(DeviceState *dev, QemuConsole *src,
 840                                 InputEvent *evt)
 841 {
 842     ChannelState *s = (ChannelState *)dev;
 843     int qcode, keycode;
 844
 845     assert(evt->type == INPUT_EVENT_KIND_KEY);
 846     qcode = qemu_input_key_value_to_qcode(evt->u.key->key);
 847     trace_escc_sunkbd_event_in(qcode, QKeyCode_lookup[qcode],
 848                                evt->u.key->down);
 849
 850     if (qcode == Q_KEY_CODE_CAPS_LOCK) {
 851         if (evt->u.key->down) {
 852             s->caps_lock_mode ^= 1;
 853             if (s->caps_lock_mode == 2) {
 854                 return; /* Drop second press */
 855             }
 856         } else {
 857             s->caps_lock_mode ^= 2;
 858             if (s->caps_lock_mode == 3) {
 859                 return; /* Drop first release */
 860             }
 861         }
 862     }
 863
 864     if (qcode == Q_KEY_CODE_NUM_LOCK) {
 865         if (evt->u.key->down) {
 866             s->num_lock_mode ^= 1;
 867             if (s->num_lock_mode == 2) {
 868                 return; /* Drop second press */
 869             }
 870         } else {
 871             s->num_lock_mode ^= 2;
 872             if (s->num_lock_mode == 3) {
 873                 return; /* Drop first release */
 874             }
 875         }
 876     }
 877
 878     keycode = qcode_to_keycode[qcode];
 879     if (!evt->u.key->down) {
 880         keycode |= 0x80;
 881     }
 882     trace_escc_sunkbd_event_out(keycode);
 883     put_queue(s, keycode);
 884 }
 885
 886 static QemuInputHandler sunkbd_handler = {
 887     .name  = "sun keyboard",
 888     .mask  = INPUT_EVENT_MASK_KEY,
 889     .event = sunkbd_handle_event,
 890 };
 891
 892 static void handle_kbd_command(ChannelState *s, int val)
 893 {
 894     trace_escc_kbd_command(val);
 895     if (s->led_mode) { // Ignore led byte
 896         s->led_mode = 0;
 897         return;
 898     }
 899     switch (val) {
 900     case 1: // Reset, return type code
 901         clear_queue(s);
 902         put_queue(s, 0xff);
 903         put_queue(s, 4); // Type 4
 904         put_queue(s, 0x7f);
 905         break;
 906     case 0xe: // Set leds
 907         s->led_mode = 1;
 908         break;
 909     case 7: // Query layout
 910     case 0xf:
 911         clear_queue(s);
 912         put_queue(s, 0xfe);
 913         put_queue(s, 0x21); /*  en-us layout */
 914         break;
 915     default:
 916         break;
 917     }
 918 }
 919
 920 static void sunmouse_event(void *opaque,
 921                                int dx, int dy, int dz, int buttons_state)
 922 {
 923     ChannelState *s = opaque;
 924     int ch;
 925
 926     trace_escc_sunmouse_event(dx, dy, buttons_state);
 927     ch = 0x80 | 0x7; /* protocol start byte, no buttons pressed */
 928
 929     if (buttons_state & MOUSE_EVENT_LBUTTON)
 930         ch ^= 0x4;
 931     if (buttons_state & MOUSE_EVENT_MBUTTON)
 932         ch ^= 0x2;
 933     if (buttons_state & MOUSE_EVENT_RBUTTON)
 934         ch ^= 0x1;
 935
 936     put_queue(s, ch);
 937
 938     ch = dx;
 939
 940     if (ch > 127)
 941         ch = 127;
 942     else if (ch < -127)
 943         ch = -127;
 944
 945     put_queue(s, ch & 0xff);
 946
 947     ch = -dy;
 948
 949     if (ch > 127)
 950         ch = 127;
 951     else if (ch < -127)
 952         ch = -127;
 953
 954     put_queue(s, ch & 0xff);
 955
 956     // MSC protocol specify two extra motion bytes
 957
 958     put_queue(s, 0);
 959     put_queue(s, 0);
 960 }
 961
 962 void slavio_serial_ms_kbd_init(hwaddr base, qemu_irq irq,
 963                                int disabled, int clock, int it_shift)
 964 {
 965     DeviceState *dev;
 966     SysBusDevice *s;
 967
 968     dev = qdev_create(NULL, TYPE_ESCC);
 969     qdev_prop_set_uint32(dev, "disabled", disabled);
 970     qdev_prop_set_uint32(dev, "frequency", clock);
 971     qdev_prop_set_uint32(dev, "it_shift", it_shift);
 972     qdev_prop_set_chr(dev, "chrB", NULL);
 973     qdev_prop_set_chr(dev, "chrA", NULL);
 974     qdev_prop_set_uint32(dev, "chnBtype", mouse);
 975     qdev_prop_set_uint32(dev, "chnAtype", kbd);
 976     qdev_init_nofail(dev);
 977     s = SYS_BUS_DEVICE(dev);
 978     sysbus_connect_irq(s, 0, irq);
 979     sysbus_connect_irq(s, 1, irq);
 980     sysbus_mmio_map(s, 0, base);
 981 }
 982
 983 static int escc_init1(SysBusDevice *dev)
 984 {
 985     ESCCState *s = ESCC(dev);
 986     unsigned int i;
 987
 988     s->chn[0].disabled = s->disabled;
 989     s->chn[1].disabled = s->disabled;
 990     for (i = 0; i < 2; i++) {
 991         sysbus_init_irq(dev, &s->chn[i].irq);
 992         s->chn[i].chn = 1 - i;
 993         s->chn[i].clock = s->frequency / 2;
 994         if (s->chn[i].chr) {
 995             qemu_chr_add_handlers(s->chn[i].chr, serial_can_receive,
 996                                   serial_receive1, serial_event, &s->chn[i]);
 997         }
 998     }
 999     s->chn[0].otherchn = &s->chn[1];
1000     s->chn[1].otherchn = &s->chn[0];
1001
1002     memory_region_init_io(&s->mmio, OBJECT(s), &escc_mem_ops, s, "escc",
1003                           ESCC_SIZE << s->it_shift);
1004     sysbus_init_mmio(dev, &s->mmio);
1005
1006     if (s->chn[0].type == mouse) {
1007         qemu_add_mouse_event_handler(sunmouse_event, &s->chn[0], 0,
1008                                      "QEMU Sun Mouse");
1009     }
1010     if (s->chn[1].type == kbd) {
1011         s->chn[1].hs = qemu_input_handler_register((DeviceState *)(&s->chn[1]),
1012                                                    &sunkbd_handler);
1013     }
1014
1015     return 0;
1016 }
1017
1018 static Property escc_properties[] = {
1019     DEFINE_PROP_UINT32("frequency", ESCCState, frequency,   0),
1020     DEFINE_PROP_UINT32("it_shift",  ESCCState, it_shift,    0),
1021     DEFINE_PROP_UINT32("disabled",  ESCCState, disabled,    0),
1022     DEFINE_PROP_UINT32("chnBtype",  ESCCState, chn[0].type, 0),
1023     DEFINE_PROP_UINT32("chnAtype",  ESCCState, chn[1].type, 0),
1024     DEFINE_PROP_CHR("chrB", ESCCState, chn[0].chr),
1025     DEFINE_PROP_CHR("chrA", ESCCState, chn[1].chr),
1026     DEFINE_PROP_END_OF_LIST(),
1027 };
1028
1029 static void escc_class_init(ObjectClass *klass, void *data)
1030 {
1031     DeviceClass *dc = DEVICE_CLASS(klass);
1032     SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
1033
1034     k->init = escc_init1;
1035     dc->reset = escc_reset;
1036     dc->vmsd = &vmstate_escc;
1037     dc->props = escc_properties;
1038     set_bit(DEVICE_CATEGORY_INPUT, dc->categories);
1039 }
1040
1041 static const TypeInfo escc_info = {
1042     .name          = TYPE_ESCC,
1043     .parent        = TYPE_SYS_BUS_DEVICE,
1044     .instance_size = sizeof(ESCCState),
1045     .class_init    = escc_class_init,
1046 };
1047
1048 static void escc_register_types(void)
1049 {
1050     type_register_static(&escc_info);
1051 }
1052
1053 type_init(escc_register_types)