hw/block/onenand.c

   1 /*
   2  * OneNAND flash memories emulation.
   3  *
   4  * Copyright (C) 2008 Nokia Corporation
   5  * Written by Andrzej Zaborowski <andrew@openedhand.com>
   6  *
   7  * This program is free software; you can redistribute it and/or
   8  * modify it under the terms of the GNU General Public License as
   9  * published by the Free Software Foundation; either version 2 or
  10  * (at your option) version 3 of the License.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License along
  18  * with this program; if not, see <http://www.gnu.org/licenses/>.
  19  */
  20
  21 #include "qemu/osdep.h"
  22 #include "qapi/error.h"
  23 #include "qemu-common.h"
  24 #include "hw/hw.h"
  25 #include "hw/block/flash.h"
  26 #include "hw/irq.h"
  27 #include "sysemu/block-backend.h"
  28 #include "sysemu/blockdev.h"
  29 #include "exec/memory.h"
  30 #include "exec/address-spaces.h"
  31 #include "hw/sysbus.h"
  32 #include "qemu/error-report.h"
  33
  34 /* 11 for 2kB-page OneNAND ("2nd generation") and 10 for 1kB-page chips */
  35 #define PAGE_SHIFT      11
  36
  37 /* Fixed */
  38 #define BLOCK_SHIFT     (PAGE_SHIFT + 6)
  39
  40 #define TYPE_ONE_NAND "onenand"
  41 #define ONE_NAND(obj) OBJECT_CHECK(OneNANDState, (obj), TYPE_ONE_NAND)
  42
  43 typedef struct OneNANDState {
  44     SysBusDevice parent_obj;
  45
  46     struct {
  47         uint16_t man;
  48         uint16_t dev;
  49         uint16_t ver;
  50     } id;
  51     int shift;
  52     hwaddr base;
  53     qemu_irq intr;
  54     qemu_irq rdy;
  55     BlockBackend *blk;
  56     BlockBackend *blk_cur;
  57     uint8_t *image;
  58     uint8_t *otp;
  59     uint8_t *current;
  60     MemoryRegion ram;
  61     MemoryRegion mapped_ram;
  62     uint8_t current_direction;
  63     uint8_t *boot[2];
  64     uint8_t *data[2][2];
  65     MemoryRegion iomem;
  66     MemoryRegion container;
  67     int cycle;
  68     int otpmode;
  69
  70     uint16_t addr[8];
  71     uint16_t unladdr[8];
  72     int bufaddr;
  73     int count;
  74     uint16_t command;
  75     uint16_t config[2];
  76     uint16_t status;
  77     uint16_t intstatus;
  78     uint16_t wpstatus;
  79
  80     ECCState ecc;
  81
  82     int density_mask;
  83     int secs;
  84     int secs_cur;
  85     int blocks;
  86     uint8_t *blockwp;
  87 } OneNANDState;
  88
  89 enum {
  90     ONEN_BUF_BLOCK = 0,
  91     ONEN_BUF_BLOCK2 = 1,
  92     ONEN_BUF_DEST_BLOCK = 2,
  93     ONEN_BUF_DEST_PAGE = 3,
  94     ONEN_BUF_PAGE = 7,
  95 };
  96
  97 enum {
  98     ONEN_ERR_CMD = 1 << 10,
  99     ONEN_ERR_ERASE = 1 << 11,
 100     ONEN_ERR_PROG = 1 << 12,
 101     ONEN_ERR_LOAD = 1 << 13,
 102 };
 103
 104 enum {
 105     ONEN_INT_RESET = 1 << 4,
 106     ONEN_INT_ERASE = 1 << 5,
 107     ONEN_INT_PROG = 1 << 6,
 108     ONEN_INT_LOAD = 1 << 7,
 109     ONEN_INT = 1 << 15,
 110 };
 111
 112 enum {
 113     ONEN_LOCK_LOCKTIGHTEN = 1 << 0,
 114     ONEN_LOCK_LOCKED = 1 << 1,
 115     ONEN_LOCK_UNLOCKED = 1 << 2,
 116 };
 117
 118 static void onenand_mem_setup(OneNANDState *s)
 119 {
 120     /* XXX: We should use IO_MEM_ROMD but we broke it earlier...
 121      * Both 0x0000 ... 0x01ff and 0x8000 ... 0x800f can be used to
 122      * write boot commands.  Also take note of the BWPS bit.  */
 123     memory_region_init(&s->container, OBJECT(s), "onenand",
 124                        0x10000 << s->shift);
 125     memory_region_add_subregion(&s->container, 0, &s->iomem);
 126     memory_region_init_alias(&s->mapped_ram, OBJECT(s), "onenand-mapped-ram",
 127                              &s->ram, 0x0200 << s->shift,
 128                              0xbe00 << s->shift);
 129     memory_region_add_subregion_overlap(&s->container,
 130                                         0x0200 << s->shift,
 131                                         &s->mapped_ram,
 132                                         1);
 133 }
 134
 135 static void onenand_intr_update(OneNANDState *s)
 136 {
 137     qemu_set_irq(s->intr, ((s->intstatus >> 15) ^ (~s->config[0] >> 6)) & 1);
 138 }
 139
 140 static int onenand_pre_save(void *opaque)
 141 {
 142     OneNANDState *s = opaque;
 143     if (s->current == s->otp) {
 144         s->current_direction = 1;
 145     } else if (s->current == s->image) {
 146         s->current_direction = 2;
 147     } else {
 148         s->current_direction = 0;
 149     }
 150
 151     return 0;
 152 }
 153
 154 static int onenand_post_load(void *opaque, int version_id)
 155 {
 156     OneNANDState *s = opaque;
 157     switch (s->current_direction) {
 158     case 0:
 159         break;
 160     case 1:
 161         s->current = s->otp;
 162         break;
 163     case 2:
 164         s->current = s->image;
 165         break;
 166     default:
 167         return -1;
 168     }
 169     onenand_intr_update(s);
 170     return 0;
 171 }
 172
 173 static const VMStateDescription vmstate_onenand = {
 174     .name = "onenand",
 175     .version_id = 1,
 176     .minimum_version_id = 1,
 177     .pre_save = onenand_pre_save,
 178     .post_load = onenand_post_load,
 179     .fields = (VMStateField[]) {
 180         VMSTATE_UINT8(current_direction, OneNANDState),
 181         VMSTATE_INT32(cycle, OneNANDState),
 182         VMSTATE_INT32(otpmode, OneNANDState),
 183         VMSTATE_UINT16_ARRAY(addr, OneNANDState, 8),
 184         VMSTATE_UINT16_ARRAY(unladdr, OneNANDState, 8),
 185         VMSTATE_INT32(bufaddr, OneNANDState),
 186         VMSTATE_INT32(count, OneNANDState),
 187         VMSTATE_UINT16(command, OneNANDState),
 188         VMSTATE_UINT16_ARRAY(config, OneNANDState, 2),
 189         VMSTATE_UINT16(status, OneNANDState),
 190         VMSTATE_UINT16(intstatus, OneNANDState),
 191         VMSTATE_UINT16(wpstatus, OneNANDState),
 192         VMSTATE_INT32(secs_cur, OneNANDState),
 193         VMSTATE_PARTIAL_VBUFFER(blockwp, OneNANDState, blocks),
 194         VMSTATE_UINT8(ecc.cp, OneNANDState),
 195         VMSTATE_UINT16_ARRAY(ecc.lp, OneNANDState, 2),
 196         VMSTATE_UINT16(ecc.count, OneNANDState),
 197         VMSTATE_BUFFER_POINTER_UNSAFE(otp, OneNANDState, 0,
 198             ((64 + 2) << PAGE_SHIFT)),
 199         VMSTATE_END_OF_LIST()
 200     }
 201 };
 202
 203 /* Hot reset (Reset OneNAND command) or warm reset (RP pin low) */
 204 static void onenand_reset(OneNANDState *s, int cold)
 205 {
 206     memset(&s->addr, 0, sizeof(s->addr));
 207     s->command = 0;
 208     s->count = 1;
 209     s->bufaddr = 0;
 210     s->config[0] = 0x40c0;
 211     s->config[1] = 0x0000;
 212     onenand_intr_update(s);
 213     qemu_irq_raise(s->rdy);
 214     s->status = 0x0000;
 215     s->intstatus = cold ? 0x8080 : 0x8010;
 216     s->unladdr[0] = 0;
 217     s->unladdr[1] = 0;
 218     s->wpstatus = 0x0002;
 219     s->cycle = 0;
 220     s->otpmode = 0;
 221     s->blk_cur = s->blk;
 222     s->current = s->image;
 223     s->secs_cur = s->secs;
 224
 225     if (cold) {
 226         /* Lock the whole flash */
 227         memset(s->blockwp, ONEN_LOCK_LOCKED, s->blocks);
 228
 229         if (s->blk_cur && blk_pread(s->blk_cur, 0, s->boot[0],
 230                                     8 << BDRV_SECTOR_BITS) < 0) {
 231             hw_error("%s: Loading the BootRAM failed.\n", __func__);
 232         }
 233     }
 234 }
 235
 236 static void onenand_system_reset(DeviceState *dev)
 237 {
 238     OneNANDState *s = ONE_NAND(dev);
 239
 240     onenand_reset(s, 1);
 241 }
 242
 243 static inline int onenand_load_main(OneNANDState *s, int sec, int secn,
 244                 void *dest)
 245 {
 246     assert(UINT32_MAX >> BDRV_SECTOR_BITS > sec);
 247     assert(UINT32_MAX >> BDRV_SECTOR_BITS > secn);
 248     if (s->blk_cur) {
 249         return blk_pread(s->blk_cur, sec << BDRV_SECTOR_BITS, dest,
 250                          secn << BDRV_SECTOR_BITS) < 0;
 251     } else if (sec + secn > s->secs_cur) {
 252         return 1;
 253     }
 254
 255     memcpy(dest, s->current + (sec << 9), secn << 9);
 256
 257     return 0;
 258 }
 259
 260 static inline int onenand_prog_main(OneNANDState *s, int sec, int secn,
 261                 void *src)
 262 {
 263     int result = 0;
 264
 265     if (secn > 0) {
 266         uint32_t size = secn << BDRV_SECTOR_BITS;
 267         uint32_t offset = sec << BDRV_SECTOR_BITS;
 268         assert(UINT32_MAX >> BDRV_SECTOR_BITS > sec);
 269         assert(UINT32_MAX >> BDRV_SECTOR_BITS > secn);
 270         const uint8_t *sp = (const uint8_t *)src;
 271         uint8_t *dp = 0;
 272         if (s->blk_cur) {
 273             dp = g_malloc(size);
 274             if (!dp || blk_pread(s->blk_cur, offset, dp, size) < 0) {
 275                 result = 1;
 276             }
 277         } else {
 278             if (sec + secn > s->secs_cur) {
 279                 result = 1;
 280             } else {
 281                 dp = (uint8_t *)s->current + offset;
 282             }
 283         }
 284         if (!result) {
 285             uint32_t i;
 286             for (i = 0; i < size; i++) {
 287                 dp[i] &= sp[i];
 288             }
 289             if (s->blk_cur) {
 290                 result = blk_pwrite(s->blk_cur, offset, dp, size, 0) < 0;
 291             }
 292         }
 293         if (dp && s->blk_cur) {
 294             g_free(dp);
 295         }
 296     }
 297
 298     return result;
 299 }
 300
 301 static inline int onenand_load_spare(OneNANDState *s, int sec, int secn,
 302                 void *dest)
 303 {
 304     uint8_t buf[512];
 305
 306     if (s->blk_cur) {
 307         uint32_t offset = (s->secs_cur + (sec >> 5)) << BDRV_SECTOR_BITS;
 308         if (blk_pread(s->blk_cur, offset, buf, BDRV_SECTOR_SIZE) < 0) {
 309             return 1;
 310         }
 311         memcpy(dest, buf + ((sec & 31) << 4), secn << 4);
 312     } else if (sec + secn > s->secs_cur) {
 313         return 1;
 314     } else {
 315         memcpy(dest, s->current + (s->secs_cur << 9) + (sec << 4), secn << 4);
 316     }
 317
 318     return 0;
 319 }
 320
 321 static inline int onenand_prog_spare(OneNANDState *s, int sec, int secn,
 322                 void *src)
 323 {
 324     int result = 0;
 325     if (secn > 0) {
 326         const uint8_t *sp = (const uint8_t *)src;
 327         uint8_t *dp = 0, *dpp = 0;
 328         uint32_t offset = (s->secs_cur + (sec >> 5)) << BDRV_SECTOR_BITS;
 329         assert(UINT32_MAX >> BDRV_SECTOR_BITS > s->secs_cur + (sec >> 5));
 330         if (s->blk_cur) {
 331             dp = g_malloc(512);
 332             if (!dp
 333                 || blk_pread(s->blk_cur, offset, dp, BDRV_SECTOR_SIZE) < 0) {
 334                 result = 1;
 335             } else {
 336                 dpp = dp + ((sec & 31) << 4);
 337             }
 338         } else {
 339             if (sec + secn > s->secs_cur) {
 340                 result = 1;
 341             } else {
 342                 dpp = s->current + (s->secs_cur << 9) + (sec << 4);
 343             }
 344         }
 345         if (!result) {
 346             uint32_t i;
 347             for (i = 0; i < (secn << 4); i++) {
 348                 dpp[i] &= sp[i];
 349             }
 350             if (s->blk_cur) {
 351                 result = blk_pwrite(s->blk_cur, offset, dp,
 352                                     BDRV_SECTOR_SIZE, 0) < 0;
 353             }
 354         }
 355         g_free(dp);
 356     }
 357     return result;
 358 }
 359
 360 static inline int onenand_erase(OneNANDState *s, int sec, int num)
 361 {
 362     uint8_t *blankbuf, *tmpbuf;
 363
 364     blankbuf = g_malloc(512);
 365     tmpbuf = g_malloc(512);
 366     memset(blankbuf, 0xff, 512);
 367     for (; num > 0; num--, sec++) {
 368         if (s->blk_cur) {
 369             int erasesec = s->secs_cur + (sec >> 5);
 370             if (blk_pwrite(s->blk_cur, sec << BDRV_SECTOR_BITS, blankbuf,
 371                            BDRV_SECTOR_SIZE, 0) < 0) {
 372                 goto fail;
 373             }
 374             if (blk_pread(s->blk_cur, erasesec << BDRV_SECTOR_BITS, tmpbuf,
 375                           BDRV_SECTOR_SIZE) < 0) {
 376                 goto fail;
 377             }
 378             memcpy(tmpbuf + ((sec & 31) << 4), blankbuf, 1 << 4);
 379             if (blk_pwrite(s->blk_cur, erasesec << BDRV_SECTOR_BITS, tmpbuf,
 380                            BDRV_SECTOR_SIZE, 0) < 0) {
 381                 goto fail;
 382             }
 383         } else {
 384             if (sec + 1 > s->secs_cur) {
 385                 goto fail;
 386             }
 387             memcpy(s->current + (sec << 9), blankbuf, 512);
 388             memcpy(s->current + (s->secs_cur << 9) + (sec << 4),
 389                    blankbuf, 1 << 4);
 390         }
 391     }
 392
 393     g_free(tmpbuf);
 394     g_free(blankbuf);
 395     return 0;
 396
 397 fail:
 398     g_free(tmpbuf);
 399     g_free(blankbuf);
 400     return 1;
 401 }
 402
 403 static void onenand_command(OneNANDState *s)
 404 {
 405     int b;
 406     int sec;
 407     void *buf;
 408 #define SETADDR(block, page)                    \
 409     sec = (s->addr[page] & 3) +                 \
 410             ((((s->addr[page] >> 2) & 0x3f) +   \
 411               (((s->addr[block] & 0xfff) |      \
 412                 (s->addr[block] >> 15 ?         \
 413                  s->density_mask : 0)) << 6)) << (PAGE_SHIFT - 9));
 414 #define SETBUF_M()                              \
 415     buf = (s->bufaddr & 8) ?                    \
 416             s->data[(s->bufaddr >> 2) & 1][0] : s->boot[0];     \
 417     buf += (s->bufaddr & 3) << 9;
 418 #define SETBUF_S()                              \
 419     buf = (s->bufaddr & 8) ?                    \
 420             s->data[(s->bufaddr >> 2) & 1][1] : s->boot[1];     \
 421     buf += (s->bufaddr & 3) << 4;
 422
 423     switch (s->command) {
 424     case 0x00:  /* Load single/multiple sector data unit into buffer */
 425         SETADDR(ONEN_BUF_BLOCK, ONEN_BUF_PAGE)
 426
 427         SETBUF_M()
 428         if (onenand_load_main(s, sec, s->count, buf))
 429             s->status |= ONEN_ERR_CMD | ONEN_ERR_LOAD;
 430
 431 #if 0
 432         SETBUF_S()
 433         if (onenand_load_spare(s, sec, s->count, buf))
 434             s->status |= ONEN_ERR_CMD | ONEN_ERR_LOAD;
 435 #endif
 436
 437         /* TODO: if (s->bufaddr & 3) + s->count was > 4 (2k-pages)
 438          * or    if (s->bufaddr & 1) + s->count was > 2 (1k-pages)
 439          * then we need two split the read/write into two chunks.
 440          */
 441         s->intstatus |= ONEN_INT | ONEN_INT_LOAD;
 442         break;
 443     case 0x13:  /* Load single/multiple spare sector into buffer */
 444         SETADDR(ONEN_BUF_BLOCK, ONEN_BUF_PAGE)
 445
 446         SETBUF_S()
 447         if (onenand_load_spare(s, sec, s->count, buf))
 448             s->status |= ONEN_ERR_CMD | ONEN_ERR_LOAD;
 449
 450         /* TODO: if (s->bufaddr & 3) + s->count was > 4 (2k-pages)
 451          * or    if (s->bufaddr & 1) + s->count was > 2 (1k-pages)
 452          * then we need two split the read/write into two chunks.
 453          */
 454         s->intstatus |= ONEN_INT | ONEN_INT_LOAD;
 455         break;
 456     case 0x80:  /* Program single/multiple sector data unit from buffer */
 457         SETADDR(ONEN_BUF_BLOCK, ONEN_BUF_PAGE)
 458
 459         SETBUF_M()
 460         if (onenand_prog_main(s, sec, s->count, buf))
 461             s->status |= ONEN_ERR_CMD | ONEN_ERR_PROG;
 462
 463 #if 0
 464         SETBUF_S()
 465         if (onenand_prog_spare(s, sec, s->count, buf))
 466             s->status |= ONEN_ERR_CMD | ONEN_ERR_PROG;
 467 #endif
 468
 469         /* TODO: if (s->bufaddr & 3) + s->count was > 4 (2k-pages)
 470          * or    if (s->bufaddr & 1) + s->count was > 2 (1k-pages)
 471          * then we need two split the read/write into two chunks.
 472          */
 473         s->intstatus |= ONEN_INT | ONEN_INT_PROG;
 474         break;
 475     case 0x1a:  /* Program single/multiple spare area sector from buffer */
 476         SETADDR(ONEN_BUF_BLOCK, ONEN_BUF_PAGE)
 477
 478         SETBUF_S()
 479         if (onenand_prog_spare(s, sec, s->count, buf))
 480             s->status |= ONEN_ERR_CMD | ONEN_ERR_PROG;
 481
 482         /* TODO: if (s->bufaddr & 3) + s->count was > 4 (2k-pages)
 483          * or    if (s->bufaddr & 1) + s->count was > 2 (1k-pages)
 484          * then we need two split the read/write into two chunks.
 485          */
 486         s->intstatus |= ONEN_INT | ONEN_INT_PROG;
 487         break;
 488     case 0x1b:  /* Copy-back program */
 489         SETBUF_S()
 490
 491         SETADDR(ONEN_BUF_BLOCK, ONEN_BUF_PAGE)
 492         if (onenand_load_main(s, sec, s->count, buf))
 493             s->status |= ONEN_ERR_CMD | ONEN_ERR_PROG;
 494
 495         SETADDR(ONEN_BUF_DEST_BLOCK, ONEN_BUF_DEST_PAGE)
 496         if (onenand_prog_main(s, sec, s->count, buf))
 497             s->status |= ONEN_ERR_CMD | ONEN_ERR_PROG;
 498
 499         /* TODO: spare areas */
 500
 501         s->intstatus |= ONEN_INT | ONEN_INT_PROG;
 502         break;
 503
 504     case 0x23:  /* Unlock NAND array block(s) */
 505         s->intstatus |= ONEN_INT;
 506
 507         /* XXX the previous (?) area should be locked automatically */
 508         for (b = s->unladdr[0]; b <= s->unladdr[1]; b ++) {
 509             if (b >= s->blocks) {
 510                 s->status |= ONEN_ERR_CMD;
 511                 break;
 512             }
 513             if (s->blockwp[b] == ONEN_LOCK_LOCKTIGHTEN)
 514                 break;
 515
 516             s->wpstatus = s->blockwp[b] = ONEN_LOCK_UNLOCKED;
 517         }
 518         break;
 519     case 0x27:  /* Unlock All NAND array blocks */
 520         s->intstatus |= ONEN_INT;
 521
 522         for (b = 0; b < s->blocks; b ++) {
 523             if (b >= s->blocks) {
 524                 s->status |= ONEN_ERR_CMD;
 525                 break;
 526             }
 527             if (s->blockwp[b] == ONEN_LOCK_LOCKTIGHTEN)
 528                 break;
 529
 530             s->wpstatus = s->blockwp[b] = ONEN_LOCK_UNLOCKED;
 531         }
 532         break;
 533
 534     case 0x2a:  /* Lock NAND array block(s) */
 535         s->intstatus |= ONEN_INT;
 536
 537         for (b = s->unladdr[0]; b <= s->unladdr[1]; b ++) {
 538             if (b >= s->blocks) {
 539                 s->status |= ONEN_ERR_CMD;
 540                 break;
 541             }
 542             if (s->blockwp[b] == ONEN_LOCK_LOCKTIGHTEN)
 543                 break;
 544
 545             s->wpstatus = s->blockwp[b] = ONEN_LOCK_LOCKED;
 546         }
 547         break;
 548     case 0x2c:  /* Lock-tight NAND array block(s) */
 549         s->intstatus |= ONEN_INT;
 550
 551         for (b = s->unladdr[0]; b <= s->unladdr[1]; b ++) {
 552             if (b >= s->blocks) {
 553                 s->status |= ONEN_ERR_CMD;
 554                 break;
 555             }
 556             if (s->blockwp[b] == ONEN_LOCK_UNLOCKED)
 557                 continue;
 558
 559             s->wpstatus = s->blockwp[b] = ONEN_LOCK_LOCKTIGHTEN;
 560         }
 561         break;
 562
 563     case 0x71:  /* Erase-Verify-Read */
 564         s->intstatus |= ONEN_INT;
 565         break;
 566     case 0x95:  /* Multi-block erase */
 567         qemu_irq_pulse(s->intr);
 568         /* Fall through.  */
 569     case 0x94:  /* Block erase */
 570         sec = ((s->addr[ONEN_BUF_BLOCK] & 0xfff) |
 571                         (s->addr[ONEN_BUF_BLOCK] >> 15 ? s->density_mask : 0))
 572                 << (BLOCK_SHIFT - 9);
 573         if (onenand_erase(s, sec, 1 << (BLOCK_SHIFT - 9)))
 574             s->status |= ONEN_ERR_CMD | ONEN_ERR_ERASE;
 575
 576         s->intstatus |= ONEN_INT | ONEN_INT_ERASE;
 577         break;
 578     case 0xb0:  /* Erase suspend */
 579         break;
 580     case 0x30:  /* Erase resume */
 581         s->intstatus |= ONEN_INT | ONEN_INT_ERASE;
 582         break;
 583
 584     case 0xf0:  /* Reset NAND Flash core */
 585         onenand_reset(s, 0);
 586         break;
 587     case 0xf3:  /* Reset OneNAND */
 588         onenand_reset(s, 0);
 589         break;
 590
 591     case 0x65:  /* OTP Access */
 592         s->intstatus |= ONEN_INT;
 593         s->blk_cur = NULL;
 594         s->current = s->otp;
 595         s->secs_cur = 1 << (BLOCK_SHIFT - 9);
 596         s->addr[ONEN_BUF_BLOCK] = 0;
 597         s->otpmode = 1;
 598         break;
 599
 600     default:
 601         s->status |= ONEN_ERR_CMD;
 602         s->intstatus |= ONEN_INT;
 603         fprintf(stderr, "%s: unknown OneNAND command %x\n",
 604                         __func__, s->command);
 605     }
 606
 607     onenand_intr_update(s);
 608 }
 609
 610 static uint64_t onenand_read(void *opaque, hwaddr addr,
 611                              unsigned size)
 612 {
 613     OneNANDState *s = (OneNANDState *) opaque;
 614     int offset = addr >> s->shift;
 615
 616     switch (offset) {
 617     case 0x0000 ... 0xc000:
 618         return lduw_le_p(s->boot[0] + addr);
 619
 620     case 0xf000:        /* Manufacturer ID */
 621         return s->id.man;
 622     case 0xf001:        /* Device ID */
 623         return s->id.dev;
 624     case 0xf002:        /* Version ID */
 625         return s->id.ver;
 626     /* TODO: get the following values from a real chip!  */
 627     case 0xf003:        /* Data Buffer size */
 628         return 1 << PAGE_SHIFT;
 629     case 0xf004:        /* Boot Buffer size */
 630         return 0x200;
 631     case 0xf005:        /* Amount of buffers */
 632         return 1 | (2 << 8);
 633     case 0xf006:        /* Technology */
 634         return 0;
 635
 636     case 0xf100 ... 0xf107:     /* Start addresses */
 637         return s->addr[offset - 0xf100];
 638
 639     case 0xf200:        /* Start buffer */
 640         return (s->bufaddr << 8) | ((s->count - 1) & (1 << (PAGE_SHIFT - 10)));
 641
 642     case 0xf220:        /* Command */
 643         return s->command;
 644     case 0xf221:        /* System Configuration 1 */
 645         return s->config[0] & 0xffe0;
 646     case 0xf222:        /* System Configuration 2 */
 647         return s->config[1];
 648
 649     case 0xf240:        /* Controller Status */
 650         return s->status;
 651     case 0xf241:        /* Interrupt */
 652         return s->intstatus;
 653     case 0xf24c:        /* Unlock Start Block Address */
 654         return s->unladdr[0];
 655     case 0xf24d:        /* Unlock End Block Address */
 656         return s->unladdr[1];
 657     case 0xf24e:        /* Write Protection Status */
 658         return s->wpstatus;
 659
 660     case 0xff00:        /* ECC Status */
 661         return 0x00;
 662     case 0xff01:        /* ECC Result of main area data */
 663     case 0xff02:        /* ECC Result of spare area data */
 664     case 0xff03:        /* ECC Result of main area data */
 665     case 0xff04:        /* ECC Result of spare area data */
 666         hw_error("%s: imeplement ECC\n", __FUNCTION__);
 667         return 0x0000;
 668     }
 669
 670     fprintf(stderr, "%s: unknown OneNAND register %x\n",
 671                     __FUNCTION__, offset);
 672     return 0;
 673 }
 674
 675 static void onenand_write(void *opaque, hwaddr addr,
 676                           uint64_t value, unsigned size)
 677 {
 678     OneNANDState *s = (OneNANDState *) opaque;
 679     int offset = addr >> s->shift;
 680     int sec;
 681
 682     switch (offset) {
 683     case 0x0000 ... 0x01ff:
 684     case 0x8000 ... 0x800f:
 685         if (s->cycle) {
 686             s->cycle = 0;
 687
 688             if (value == 0x0000) {
 689                 SETADDR(ONEN_BUF_BLOCK, ONEN_BUF_PAGE)
 690                 onenand_load_main(s, sec,
 691                                 1 << (PAGE_SHIFT - 9), s->data[0][0]);
 692                 s->addr[ONEN_BUF_PAGE] += 4;
 693                 s->addr[ONEN_BUF_PAGE] &= 0xff;
 694             }
 695             break;
 696         }
 697
 698         switch (value) {
 699         case 0x00f0:    /* Reset OneNAND */
 700             onenand_reset(s, 0);
 701             break;
 702
 703         case 0x00e0:    /* Load Data into Buffer */
 704             s->cycle = 1;
 705             break;
 706
 707         case 0x0090:    /* Read Identification Data */
 708             memset(s->boot[0], 0, 3 << s->shift);
 709             s->boot[0][0 << s->shift] = s->id.man & 0xff;
 710             s->boot[0][1 << s->shift] = s->id.dev & 0xff;
 711             s->boot[0][2 << s->shift] = s->wpstatus & 0xff;
 712             break;
 713
 714         default:
 715             fprintf(stderr, "%s: unknown OneNAND boot command %"PRIx64"\n",
 716                             __FUNCTION__, value);
 717         }
 718         break;
 719
 720     case 0xf100 ... 0xf107:     /* Start addresses */
 721         s->addr[offset - 0xf100] = value;
 722         break;
 723
 724     case 0xf200:        /* Start buffer */
 725         s->bufaddr = (value >> 8) & 0xf;
 726         if (PAGE_SHIFT == 11)
 727             s->count = (value & 3) ?: 4;
 728         else if (PAGE_SHIFT == 10)
 729             s->count = (value & 1) ?: 2;
 730         break;
 731
 732     case 0xf220:        /* Command */
 733         if (s->intstatus & (1 << 15))
 734             break;
 735         s->command = value;
 736         onenand_command(s);
 737         break;
 738     case 0xf221:        /* System Configuration 1 */
 739         s->config[0] = value;
 740         onenand_intr_update(s);
 741         qemu_set_irq(s->rdy, (s->config[0] >> 7) & 1);
 742         break;
 743     case 0xf222:        /* System Configuration 2 */
 744         s->config[1] = value;
 745         break;
 746
 747     case 0xf241:        /* Interrupt */
 748         s->intstatus &= value;
 749         if ((1 << 15) & ~s->intstatus)
 750             s->status &= ~(ONEN_ERR_CMD | ONEN_ERR_ERASE |
 751                             ONEN_ERR_PROG | ONEN_ERR_LOAD);
 752         onenand_intr_update(s);
 753         break;
 754     case 0xf24c:        /* Unlock Start Block Address */
 755         s->unladdr[0] = value & (s->blocks - 1);
 756         /* For some reason we have to set the end address to by default
 757          * be same as start because the software forgets to write anything
 758          * in there.  */
 759         s->unladdr[1] = value & (s->blocks - 1);
 760         break;
 761     case 0xf24d:        /* Unlock End Block Address */
 762         s->unladdr[1] = value & (s->blocks - 1);
 763         break;
 764
 765     default:
 766         fprintf(stderr, "%s: unknown OneNAND register %x\n",
 767                         __FUNCTION__, offset);
 768     }
 769 }
 770
 771 static const MemoryRegionOps onenand_ops = {
 772     .read = onenand_read,
 773     .write = onenand_write,
 774     .endianness = DEVICE_NATIVE_ENDIAN,
 775 };
 776
 777 static int onenand_initfn(SysBusDevice *sbd)
 778 {
 779     DeviceState *dev = DEVICE(sbd);
 780     OneNANDState *s = ONE_NAND(dev);
 781     uint32_t size = 1 << (24 + ((s->id.dev >> 4) & 7));
 782     void *ram;
 783     Error *local_err = NULL;
 784
 785     s->base = (hwaddr)-1;
 786     s->rdy = NULL;
 787     s->blocks = size >> BLOCK_SHIFT;
 788     s->secs = size >> 9;
 789     s->blockwp = g_malloc(s->blocks);
 790     s->density_mask = (s->id.dev & 0x08)
 791         ? (1 << (6 + ((s->id.dev >> 4) & 7))) : 0;
 792     memory_region_init_io(&s->iomem, OBJECT(s), &onenand_ops, s, "onenand",
 793                           0x10000 << s->shift);
 794     if (!s->blk) {
 795         s->image = memset(g_malloc(size + (size >> 5)),
 796                           0xff, size + (size >> 5));
 797     } else {
 798         if (blk_is_read_only(s->blk)) {
 799             error_report("Can't use a read-only drive");
 800             return -1;
 801         }
 802         blk_set_perm(s->blk, BLK_PERM_CONSISTENT_READ | BLK_PERM_WRITE,
 803                      BLK_PERM_ALL, &local_err);
 804         if (local_err) {
 805             error_report_err(local_err);
 806             return -1;
 807         }
 808         s->blk_cur = s->blk;
 809     }
 810     s->otp = memset(g_malloc((64 + 2) << PAGE_SHIFT),
 811                     0xff, (64 + 2) << PAGE_SHIFT);
 812     memory_region_init_ram_nomigrate(&s->ram, OBJECT(s), "onenand.ram",
 813                            0xc000 << s->shift, &error_fatal);
 814     vmstate_register_ram_global(&s->ram);
 815     ram = memory_region_get_ram_ptr(&s->ram);
 816     s->boot[0] = ram + (0x0000 << s->shift);
 817     s->boot[1] = ram + (0x8000 << s->shift);
 818     s->data[0][0] = ram + ((0x0200 + (0 << (PAGE_SHIFT - 1))) << s->shift);
 819     s->data[0][1] = ram + ((0x8010 + (0 << (PAGE_SHIFT - 6))) << s->shift);
 820     s->data[1][0] = ram + ((0x0200 + (1 << (PAGE_SHIFT - 1))) << s->shift);
 821     s->data[1][1] = ram + ((0x8010 + (1 << (PAGE_SHIFT - 6))) << s->shift);
 822     onenand_mem_setup(s);
 823     sysbus_init_irq(sbd, &s->intr);
 824     sysbus_init_mmio(sbd, &s->container);
 825     vmstate_register(dev,
 826                      ((s->shift & 0x7f) << 24)
 827                      | ((s->id.man & 0xff) << 16)
 828                      | ((s->id.dev & 0xff) << 8)
 829                      | (s->id.ver & 0xff),
 830                      &vmstate_onenand, s);
 831     return 0;
 832 }
 833
 834 static Property onenand_properties[] = {
 835     DEFINE_PROP_UINT16("manufacturer_id", OneNANDState, id.man, 0),
 836     DEFINE_PROP_UINT16("device_id", OneNANDState, id.dev, 0),
 837     DEFINE_PROP_UINT16("version_id", OneNANDState, id.ver, 0),
 838     DEFINE_PROP_INT32("shift", OneNANDState, shift, 0),
 839     DEFINE_PROP_DRIVE("drive", OneNANDState, blk),
 840     DEFINE_PROP_END_OF_LIST(),
 841 };
 842
 843 static void onenand_class_init(ObjectClass *klass, void *data)
 844 {
 845     DeviceClass *dc = DEVICE_CLASS(klass);
 846     SysBusDeviceClass *k = SYS_BUS_DEVICE_CLASS(klass);
 847
 848     k->init = onenand_initfn;
 849     dc->reset = onenand_system_reset;
 850     dc->props = onenand_properties;
 851 }
 852
 853 static const TypeInfo onenand_info = {
 854     .name          = TYPE_ONE_NAND,
 855     .parent        = TYPE_SYS_BUS_DEVICE,
 856     .instance_size = sizeof(OneNANDState),
 857     .class_init    = onenand_class_init,
 858 };
 859
 860 static void onenand_register_types(void)
 861 {
 862     type_register_static(&onenand_info);
 863 }
 864
 865 void *onenand_raw_otp(DeviceState *onenand_device)
 866 {
 867     OneNANDState *s = ONE_NAND(onenand_device);
 868
 869     return s->otp;
 870 }
 871
 872 type_init(onenand_register_types)