2 * PXA270-based Clamshell PDA platforms.
4 * Copyright (c) 2006 Openedhand Ltd.
5 * Written by Andrzej Zaborowski <balrog@zabor.org>
7 * This code is licensed under the GNU GPL v2.
9 * Contributions after 2012-01-13 are licensed under the terms of the
10 * GNU GPL, version 2 or (at your option) any later version.
14 #include "hw/arm/pxa.h"
15 #include "hw/arm/arm.h"
16 #include "sysemu/sysemu.h"
17 #include "hw/pcmcia.h"
18 #include "hw/i2c/i2c.h"
20 #include "hw/block/flash.h"
21 #include "qemu/timer.h"
22 #include "hw/devices.h"
23 #include "hw/arm/sharpsl.h"
24 #include "ui/console.h"
25 #include "block/block.h"
26 #include "audio/audio.h"
27 #include "hw/boards.h"
28 #include "sysemu/blockdev.h"
29 #include "hw/sysbus.h"
30 #include "exec/address-spaces.h"
33 #define REG_FMT "0x%02lx"
36 #define FLASH_BASE 0x0c000000
37 #define FLASH_ECCLPLB 0x00 /* Line parity 7 - 0 bit */
38 #define FLASH_ECCLPUB 0x04 /* Line parity 15 - 8 bit */
39 #define FLASH_ECCCP 0x08 /* Column parity 5 - 0 bit */
40 #define FLASH_ECCCNTR 0x0c /* ECC byte counter */
41 #define FLASH_ECCCLRR 0x10 /* Clear ECC */
42 #define FLASH_FLASHIO 0x14 /* Flash I/O */
43 #define FLASH_FLASHCTL 0x18 /* Flash Control */
45 #define FLASHCTL_CE0 (1 << 0)
46 #define FLASHCTL_CLE (1 << 1)
47 #define FLASHCTL_ALE (1 << 2)
48 #define FLASHCTL_WP (1 << 3)
49 #define FLASHCTL_CE1 (1 << 4)
50 #define FLASHCTL_RYBY (1 << 5)
51 #define FLASHCTL_NCE (FLASHCTL_CE0 | FLASHCTL_CE1)
53 #define TYPE_SL_NAND "sl-nand"
54 #define SL_NAND(obj) OBJECT_CHECK(SLNANDState, (obj), TYPE_SL_NAND)
57 SysBusDevice parent_obj
;
67 static uint64_t sl_read(void *opaque
, hwaddr addr
, unsigned size
)
69 SLNANDState
*s
= (SLNANDState
*) opaque
;
73 #define BSHR(byte, from, to) ((s->ecc.lp[byte] >> (from - to)) & (1 << to))
75 return BSHR(0, 4, 0) | BSHR(0, 5, 2) | BSHR(0, 6, 4) | BSHR(0, 7, 6) |
76 BSHR(1, 4, 1) | BSHR(1, 5, 3) | BSHR(1, 6, 5) | BSHR(1, 7, 7);
78 #define BSHL(byte, from, to) ((s->ecc.lp[byte] << (to - from)) & (1 << to))
80 return BSHL(0, 0, 0) | BSHL(0, 1, 2) | BSHL(0, 2, 4) | BSHL(0, 3, 6) |
81 BSHL(1, 0, 1) | BSHL(1, 1, 3) | BSHL(1, 2, 5) | BSHL(1, 3, 7);
87 return s
->ecc
.count
& 0xff;
90 nand_getpins(s
->nand
, &ryby
);
92 return s
->ctl
| FLASHCTL_RYBY
;
98 return ecc_digest(&s
->ecc
, nand_getio(s
->nand
)) |
99 (ecc_digest(&s
->ecc
, nand_getio(s
->nand
)) << 16);
101 return ecc_digest(&s
->ecc
, nand_getio(s
->nand
));
104 zaurus_printf("Bad register offset " REG_FMT
"\n", (unsigned long)addr
);
109 static void sl_write(void *opaque
, hwaddr addr
,
110 uint64_t value
, unsigned size
)
112 SLNANDState
*s
= (SLNANDState
*) opaque
;
116 /* Value is ignored. */
121 s
->ctl
= value
& 0xff & ~FLASHCTL_RYBY
;
122 nand_setpins(s
->nand
,
123 s
->ctl
& FLASHCTL_CLE
,
124 s
->ctl
& FLASHCTL_ALE
,
125 s
->ctl
& FLASHCTL_NCE
,
126 s
->ctl
& FLASHCTL_WP
,
131 nand_setio(s
->nand
, ecc_digest(&s
->ecc
, value
& 0xff));
135 zaurus_printf("Bad register offset " REG_FMT
"\n", (unsigned long)addr
);
144 static const MemoryRegionOps sl_ops
= {
147 .endianness
= DEVICE_NATIVE_ENDIAN
,
150 static void sl_flash_register(PXA2xxState
*cpu
, int size
)
154 dev
= qdev_create(NULL
, TYPE_SL_NAND
);
156 qdev_prop_set_uint8(dev
, "manf_id", NAND_MFR_SAMSUNG
);
157 if (size
== FLASH_128M
)
158 qdev_prop_set_uint8(dev
, "chip_id", 0x73);
159 else if (size
== FLASH_1024M
)
160 qdev_prop_set_uint8(dev
, "chip_id", 0xf1);
162 qdev_init_nofail(dev
);
163 sysbus_mmio_map(SYS_BUS_DEVICE(dev
), 0, FLASH_BASE
);
166 static int sl_nand_init(SysBusDevice
*dev
)
168 SLNANDState
*s
= SL_NAND(dev
);
172 nand
= drive_get(IF_MTD
, 0, 0);
173 s
->nand
= nand_init(nand
? nand
->bdrv
: NULL
, s
->manf_id
, s
->chip_id
);
175 memory_region_init_io(&s
->iomem
, OBJECT(s
), &sl_ops
, s
, "sl", 0x40);
176 sysbus_init_mmio(dev
, &s
->iomem
);
183 #define SPITZ_KEY_STROBE_NUM 11
184 #define SPITZ_KEY_SENSE_NUM 7
186 static const int spitz_gpio_key_sense
[SPITZ_KEY_SENSE_NUM
] = {
187 12, 17, 91, 34, 36, 38, 39
190 static const int spitz_gpio_key_strobe
[SPITZ_KEY_STROBE_NUM
] = {
191 88, 23, 24, 25, 26, 27, 52, 103, 107, 108, 114
194 /* Eighth additional row maps the special keys */
195 static int spitz_keymap
[SPITZ_KEY_SENSE_NUM
+ 1][SPITZ_KEY_STROBE_NUM
] = {
196 { 0x1d, 0x02, 0x04, 0x06, 0x07, 0x08, 0x0a, 0x0b, 0x0e, 0x3f, 0x40 },
197 { -1 , 0x03, 0x05, 0x13, 0x15, 0x09, 0x17, 0x18, 0x19, 0x41, 0x42 },
198 { 0x0f, 0x10, 0x12, 0x14, 0x22, 0x16, 0x24, 0x25, -1 , -1 , -1 },
199 { 0x3c, 0x11, 0x1f, 0x21, 0x2f, 0x23, 0x32, 0x26, -1 , 0x36, -1 },
200 { 0x3b, 0x1e, 0x20, 0x2e, 0x30, 0x31, 0x34, -1 , 0x1c, 0x2a, -1 },
201 { 0x44, 0x2c, 0x2d, 0x0c, 0x39, 0x33, -1 , 0x48, -1 , -1 , 0x38 },
202 { 0x37, 0x3d, -1 , 0x45, 0x57, 0x58, 0x4b, 0x50, 0x4d, -1 , -1 },
203 { 0x52, 0x43, 0x01, 0x47, 0x49, -1 , -1 , -1 , -1 , -1 , -1 },
206 #define SPITZ_GPIO_AK_INT 13 /* Remote control */
207 #define SPITZ_GPIO_SYNC 16 /* Sync button */
208 #define SPITZ_GPIO_ON_KEY 95 /* Power button */
209 #define SPITZ_GPIO_SWA 97 /* Lid */
210 #define SPITZ_GPIO_SWB 96 /* Tablet mode */
212 /* The special buttons are mapped to unused keys */
213 static const int spitz_gpiomap
[5] = {
214 SPITZ_GPIO_AK_INT
, SPITZ_GPIO_SYNC
, SPITZ_GPIO_ON_KEY
,
215 SPITZ_GPIO_SWA
, SPITZ_GPIO_SWB
,
218 #define TYPE_SPITZ_KEYBOARD "spitz-keyboard"
219 #define SPITZ_KEYBOARD(obj) \
220 OBJECT_CHECK(SpitzKeyboardState, (obj), TYPE_SPITZ_KEYBOARD)
223 SysBusDevice parent_obj
;
225 qemu_irq sense
[SPITZ_KEY_SENSE_NUM
];
228 uint16_t keyrow
[SPITZ_KEY_SENSE_NUM
];
229 uint16_t strobe_state
;
230 uint16_t sense_state
;
232 uint16_t pre_map
[0x100];
236 int fifopos
, fifolen
;
238 } SpitzKeyboardState
;
240 static void spitz_keyboard_sense_update(SpitzKeyboardState
*s
)
243 uint16_t strobe
, sense
= 0;
244 for (i
= 0; i
< SPITZ_KEY_SENSE_NUM
; i
++) {
245 strobe
= s
->keyrow
[i
] & s
->strobe_state
;
248 if (!(s
->sense_state
& (1 << i
)))
249 qemu_irq_raise(s
->sense
[i
]);
250 } else if (s
->sense_state
& (1 << i
))
251 qemu_irq_lower(s
->sense
[i
]);
254 s
->sense_state
= sense
;
257 static void spitz_keyboard_strobe(void *opaque
, int line
, int level
)
259 SpitzKeyboardState
*s
= (SpitzKeyboardState
*) opaque
;
262 s
->strobe_state
|= 1 << line
;
264 s
->strobe_state
&= ~(1 << line
);
265 spitz_keyboard_sense_update(s
);
268 static void spitz_keyboard_keydown(SpitzKeyboardState
*s
, int keycode
)
270 int spitz_keycode
= s
->keymap
[keycode
& 0x7f];
271 if (spitz_keycode
== -1)
274 /* Handle the additional keys */
275 if ((spitz_keycode
>> 4) == SPITZ_KEY_SENSE_NUM
) {
276 qemu_set_irq(s
->gpiomap
[spitz_keycode
& 0xf], (keycode
< 0x80));
281 s
->keyrow
[spitz_keycode
>> 4] &= ~(1 << (spitz_keycode
& 0xf));
283 s
->keyrow
[spitz_keycode
>> 4] |= 1 << (spitz_keycode
& 0xf);
285 spitz_keyboard_sense_update(s
);
288 #define MOD_SHIFT (1 << 7)
289 #define MOD_CTRL (1 << 8)
290 #define MOD_FN (1 << 9)
292 #define QUEUE_KEY(c) s->fifo[(s->fifopos + s->fifolen ++) & 0xf] = c
294 static void spitz_keyboard_handler(void *opaque
, int keycode
)
296 SpitzKeyboardState
*s
= opaque
;
300 case 0x2a: /* Left Shift */
306 case 0x36: /* Right Shift */
312 case 0x1d: /* Control */
326 code
= s
->pre_map
[mapcode
= ((s
->modifiers
& 3) ?
327 (keycode
| MOD_SHIFT
) :
328 (keycode
& ~MOD_SHIFT
))];
330 if (code
!= mapcode
) {
332 if ((code
& MOD_SHIFT
) && !(s
->modifiers
& 1))
333 QUEUE_KEY(0x2a | (keycode
& 0x80));
334 if ((code
& MOD_CTRL
) && !(s
->modifiers
& 4))
335 QUEUE_KEY(0x1d | (keycode
& 0x80));
336 if ((code
& MOD_FN
) && !(s
->modifiers
& 8))
337 QUEUE_KEY(0x38 | (keycode
& 0x80));
338 if ((code
& MOD_FN
) && (s
->modifiers
& 1))
339 QUEUE_KEY(0x2a | (~keycode
& 0x80));
340 if ((code
& MOD_FN
) && (s
->modifiers
& 2))
341 QUEUE_KEY(0x36 | (~keycode
& 0x80));
343 if (keycode
& 0x80) {
344 if ((s
->imodifiers
& 1 ) && !(s
->modifiers
& 1))
345 QUEUE_KEY(0x2a | 0x80);
346 if ((s
->imodifiers
& 4 ) && !(s
->modifiers
& 4))
347 QUEUE_KEY(0x1d | 0x80);
348 if ((s
->imodifiers
& 8 ) && !(s
->modifiers
& 8))
349 QUEUE_KEY(0x38 | 0x80);
350 if ((s
->imodifiers
& 0x10) && (s
->modifiers
& 1))
352 if ((s
->imodifiers
& 0x20) && (s
->modifiers
& 2))
356 if ((code
& MOD_SHIFT
) && !((s
->modifiers
| s
->imodifiers
) & 1)) {
360 if ((code
& MOD_CTRL
) && !((s
->modifiers
| s
->imodifiers
) & 4)) {
364 if ((code
& MOD_FN
) && !((s
->modifiers
| s
->imodifiers
) & 8)) {
368 if ((code
& MOD_FN
) && (s
->modifiers
& 1) &&
369 !(s
->imodifiers
& 0x10)) {
370 QUEUE_KEY(0x2a | 0x80);
371 s
->imodifiers
|= 0x10;
373 if ((code
& MOD_FN
) && (s
->modifiers
& 2) &&
374 !(s
->imodifiers
& 0x20)) {
375 QUEUE_KEY(0x36 | 0x80);
376 s
->imodifiers
|= 0x20;
382 QUEUE_KEY((code
& 0x7f) | (keycode
& 0x80));
385 static void spitz_keyboard_tick(void *opaque
)
387 SpitzKeyboardState
*s
= (SpitzKeyboardState
*) opaque
;
390 spitz_keyboard_keydown(s
, s
->fifo
[s
->fifopos
++]);
392 if (s
->fifopos
>= 16)
396 timer_mod(s
->kbdtimer
, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL
) +
397 get_ticks_per_sec() / 32);
400 static void spitz_keyboard_pre_map(SpitzKeyboardState
*s
)
403 for (i
= 0; i
< 0x100; i
++)
405 s
->pre_map
[0x02 | MOD_SHIFT
] = 0x02 | MOD_SHIFT
; /* exclam */
406 s
->pre_map
[0x28 | MOD_SHIFT
] = 0x03 | MOD_SHIFT
; /* quotedbl */
407 s
->pre_map
[0x04 | MOD_SHIFT
] = 0x04 | MOD_SHIFT
; /* numbersign */
408 s
->pre_map
[0x05 | MOD_SHIFT
] = 0x05 | MOD_SHIFT
; /* dollar */
409 s
->pre_map
[0x06 | MOD_SHIFT
] = 0x06 | MOD_SHIFT
; /* percent */
410 s
->pre_map
[0x08 | MOD_SHIFT
] = 0x07 | MOD_SHIFT
; /* ampersand */
411 s
->pre_map
[0x28 ] = 0x08 | MOD_SHIFT
; /* apostrophe */
412 s
->pre_map
[0x0a | MOD_SHIFT
] = 0x09 | MOD_SHIFT
; /* parenleft */
413 s
->pre_map
[0x0b | MOD_SHIFT
] = 0x0a | MOD_SHIFT
; /* parenright */
414 s
->pre_map
[0x29 | MOD_SHIFT
] = 0x0b | MOD_SHIFT
; /* asciitilde */
415 s
->pre_map
[0x03 | MOD_SHIFT
] = 0x0c | MOD_SHIFT
; /* at */
416 s
->pre_map
[0xd3 ] = 0x0e | MOD_FN
; /* Delete */
417 s
->pre_map
[0x3a ] = 0x0f | MOD_FN
; /* Caps_Lock */
418 s
->pre_map
[0x07 | MOD_SHIFT
] = 0x11 | MOD_FN
; /* asciicircum */
419 s
->pre_map
[0x0d ] = 0x12 | MOD_FN
; /* equal */
420 s
->pre_map
[0x0d | MOD_SHIFT
] = 0x13 | MOD_FN
; /* plus */
421 s
->pre_map
[0x1a ] = 0x14 | MOD_FN
; /* bracketleft */
422 s
->pre_map
[0x1b ] = 0x15 | MOD_FN
; /* bracketright */
423 s
->pre_map
[0x1a | MOD_SHIFT
] = 0x16 | MOD_FN
; /* braceleft */
424 s
->pre_map
[0x1b | MOD_SHIFT
] = 0x17 | MOD_FN
; /* braceright */
425 s
->pre_map
[0x27 ] = 0x22 | MOD_FN
; /* semicolon */
426 s
->pre_map
[0x27 | MOD_SHIFT
] = 0x23 | MOD_FN
; /* colon */
427 s
->pre_map
[0x09 | MOD_SHIFT
] = 0x24 | MOD_FN
; /* asterisk */
428 s
->pre_map
[0x2b ] = 0x25 | MOD_FN
; /* backslash */
429 s
->pre_map
[0x2b | MOD_SHIFT
] = 0x26 | MOD_FN
; /* bar */
430 s
->pre_map
[0x0c | MOD_SHIFT
] = 0x30 | MOD_FN
; /* underscore */
431 s
->pre_map
[0x33 | MOD_SHIFT
] = 0x33 | MOD_FN
; /* less */
432 s
->pre_map
[0x35 ] = 0x33 | MOD_SHIFT
; /* slash */
433 s
->pre_map
[0x34 | MOD_SHIFT
] = 0x34 | MOD_FN
; /* greater */
434 s
->pre_map
[0x35 | MOD_SHIFT
] = 0x34 | MOD_SHIFT
; /* question */
435 s
->pre_map
[0x49 ] = 0x48 | MOD_FN
; /* Page_Up */
436 s
->pre_map
[0x51 ] = 0x50 | MOD_FN
; /* Page_Down */
448 static int spitz_keyboard_post_load(void *opaque
, int version_id
)
450 SpitzKeyboardState
*s
= (SpitzKeyboardState
*) opaque
;
452 /* Release all pressed keys */
453 memset(s
->keyrow
, 0, sizeof(s
->keyrow
));
454 spitz_keyboard_sense_update(s
);
463 static void spitz_keyboard_register(PXA2xxState
*cpu
)
467 SpitzKeyboardState
*s
;
469 dev
= sysbus_create_simple(TYPE_SPITZ_KEYBOARD
, -1, NULL
);
470 s
= SPITZ_KEYBOARD(dev
);
472 for (i
= 0; i
< SPITZ_KEY_SENSE_NUM
; i
++)
473 qdev_connect_gpio_out(dev
, i
, qdev_get_gpio_in(cpu
->gpio
, spitz_gpio_key_sense
[i
]));
475 for (i
= 0; i
< 5; i
++)
476 s
->gpiomap
[i
] = qdev_get_gpio_in(cpu
->gpio
, spitz_gpiomap
[i
]);
479 s
->gpiomap
[4] = qemu_irq_invert(s
->gpiomap
[4]);
481 for (i
= 0; i
< 5; i
++)
482 qemu_set_irq(s
->gpiomap
[i
], 0);
484 for (i
= 0; i
< SPITZ_KEY_STROBE_NUM
; i
++)
485 qdev_connect_gpio_out(cpu
->gpio
, spitz_gpio_key_strobe
[i
],
486 qdev_get_gpio_in(dev
, i
));
488 timer_mod(s
->kbdtimer
, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL
));
490 qemu_add_kbd_event_handler(spitz_keyboard_handler
, s
);
493 static int spitz_keyboard_init(SysBusDevice
*sbd
)
495 DeviceState
*dev
= DEVICE(sbd
);
496 SpitzKeyboardState
*s
= SPITZ_KEYBOARD(dev
);
499 for (i
= 0; i
< 0x80; i
++)
501 for (i
= 0; i
< SPITZ_KEY_SENSE_NUM
+ 1; i
++)
502 for (j
= 0; j
< SPITZ_KEY_STROBE_NUM
; j
++)
503 if (spitz_keymap
[i
][j
] != -1)
504 s
->keymap
[spitz_keymap
[i
][j
]] = (i
<< 4) | j
;
506 spitz_keyboard_pre_map(s
);
508 s
->kbdtimer
= timer_new_ns(QEMU_CLOCK_VIRTUAL
, spitz_keyboard_tick
, s
);
509 qdev_init_gpio_in(dev
, spitz_keyboard_strobe
, SPITZ_KEY_STROBE_NUM
);
510 qdev_init_gpio_out(dev
, s
->sense
, SPITZ_KEY_SENSE_NUM
);
515 /* LCD backlight controller */
517 #define LCDTG_RESCTL 0x00
518 #define LCDTG_PHACTRL 0x01
519 #define LCDTG_DUTYCTRL 0x02
520 #define LCDTG_POWERREG0 0x03
521 #define LCDTG_POWERREG1 0x04
522 #define LCDTG_GPOR3 0x05
523 #define LCDTG_PICTRL 0x06
524 #define LCDTG_POLCTRL 0x07
528 uint32_t bl_intensity
;
532 static void spitz_bl_update(SpitzLCDTG
*s
)
534 if (s
->bl_power
&& s
->bl_intensity
)
535 zaurus_printf("LCD Backlight now at %i/63\n", s
->bl_intensity
);
537 zaurus_printf("LCD Backlight now off\n");
540 /* FIXME: Implement GPIO properly and remove this hack. */
541 static SpitzLCDTG
*spitz_lcdtg
;
543 static inline void spitz_bl_bit5(void *opaque
, int line
, int level
)
545 SpitzLCDTG
*s
= spitz_lcdtg
;
546 int prev
= s
->bl_intensity
;
549 s
->bl_intensity
&= ~0x20;
551 s
->bl_intensity
|= 0x20;
553 if (s
->bl_power
&& prev
!= s
->bl_intensity
)
557 static inline void spitz_bl_power(void *opaque
, int line
, int level
)
559 SpitzLCDTG
*s
= spitz_lcdtg
;
560 s
->bl_power
= !!level
;
564 static uint32_t spitz_lcdtg_transfer(SSISlave
*dev
, uint32_t value
)
566 SpitzLCDTG
*s
= FROM_SSI_SLAVE(SpitzLCDTG
, dev
);
574 zaurus_printf("LCD in QVGA mode\n");
576 zaurus_printf("LCD in VGA mode\n");
580 s
->bl_intensity
&= ~0x1f;
581 s
->bl_intensity
|= value
;
586 case LCDTG_POWERREG0
:
587 /* Set common voltage to M62332FP */
593 static int spitz_lcdtg_init(SSISlave
*dev
)
595 SpitzLCDTG
*s
= FROM_SSI_SLAVE(SpitzLCDTG
, dev
);
599 s
->bl_intensity
= 0x20;
606 #define CORGI_SSP_PORT 2
608 #define SPITZ_GPIO_LCDCON_CS 53
609 #define SPITZ_GPIO_ADS7846_CS 14
610 #define SPITZ_GPIO_MAX1111_CS 20
611 #define SPITZ_GPIO_TP_INT 11
613 static DeviceState
*max1111
;
615 /* "Demux" the signal based on current chipselect */
622 static uint32_t corgi_ssp_transfer(SSISlave
*dev
, uint32_t value
)
624 CorgiSSPState
*s
= FROM_SSI_SLAVE(CorgiSSPState
, dev
);
627 for (i
= 0; i
< 3; i
++) {
629 return ssi_transfer(s
->bus
[i
], value
);
635 static void corgi_ssp_gpio_cs(void *opaque
, int line
, int level
)
637 CorgiSSPState
*s
= (CorgiSSPState
*)opaque
;
638 assert(line
>= 0 && line
< 3);
639 s
->enable
[line
] = !level
;
642 #define MAX1111_BATT_VOLT 1
643 #define MAX1111_BATT_TEMP 2
644 #define MAX1111_ACIN_VOLT 3
646 #define SPITZ_BATTERY_TEMP 0xe0 /* About 2.9V */
647 #define SPITZ_BATTERY_VOLT 0xd0 /* About 4.0V */
648 #define SPITZ_CHARGEON_ACIN 0x80 /* About 5.0V */
650 static void spitz_adc_temp_on(void *opaque
, int line
, int level
)
656 max111x_set_input(max1111
, MAX1111_BATT_TEMP
, SPITZ_BATTERY_TEMP
);
658 max111x_set_input(max1111
, MAX1111_BATT_TEMP
, 0);
661 static int corgi_ssp_init(SSISlave
*d
)
663 DeviceState
*dev
= DEVICE(d
);
664 CorgiSSPState
*s
= FROM_SSI_SLAVE(CorgiSSPState
, d
);
666 qdev_init_gpio_in(dev
, corgi_ssp_gpio_cs
, 3);
667 s
->bus
[0] = ssi_create_bus(dev
, "ssi0");
668 s
->bus
[1] = ssi_create_bus(dev
, "ssi1");
669 s
->bus
[2] = ssi_create_bus(dev
, "ssi2");
674 static void spitz_ssp_attach(PXA2xxState
*cpu
)
680 mux
= ssi_create_slave(cpu
->ssp
[CORGI_SSP_PORT
- 1], "corgi-ssp");
682 bus
= qdev_get_child_bus(mux
, "ssi0");
683 ssi_create_slave(bus
, "spitz-lcdtg");
685 bus
= qdev_get_child_bus(mux
, "ssi1");
686 dev
= ssi_create_slave(bus
, "ads7846");
687 qdev_connect_gpio_out(dev
, 0,
688 qdev_get_gpio_in(cpu
->gpio
, SPITZ_GPIO_TP_INT
));
690 bus
= qdev_get_child_bus(mux
, "ssi2");
691 max1111
= ssi_create_slave(bus
, "max1111");
692 max111x_set_input(max1111
, MAX1111_BATT_VOLT
, SPITZ_BATTERY_VOLT
);
693 max111x_set_input(max1111
, MAX1111_BATT_TEMP
, 0);
694 max111x_set_input(max1111
, MAX1111_ACIN_VOLT
, SPITZ_CHARGEON_ACIN
);
696 qdev_connect_gpio_out(cpu
->gpio
, SPITZ_GPIO_LCDCON_CS
,
697 qdev_get_gpio_in(mux
, 0));
698 qdev_connect_gpio_out(cpu
->gpio
, SPITZ_GPIO_ADS7846_CS
,
699 qdev_get_gpio_in(mux
, 1));
700 qdev_connect_gpio_out(cpu
->gpio
, SPITZ_GPIO_MAX1111_CS
,
701 qdev_get_gpio_in(mux
, 2));
706 static void spitz_microdrive_attach(PXA2xxState
*cpu
, int slot
)
711 dinfo
= drive_get(IF_IDE
, 0, 0);
712 if (!dinfo
|| dinfo
->media_cd
)
714 md
= dscm1xxxx_init(dinfo
);
715 pxa2xx_pcmcia_attach(cpu
->pcmcia
[slot
], md
);
718 /* Wm8750 and Max7310 on I2C */
720 #define AKITA_MAX_ADDR 0x18
721 #define SPITZ_WM_ADDRL 0x1b
722 #define SPITZ_WM_ADDRH 0x1a
724 #define SPITZ_GPIO_WM 5
726 static void spitz_wm8750_addr(void *opaque
, int line
, int level
)
728 I2CSlave
*wm
= (I2CSlave
*) opaque
;
730 i2c_set_slave_address(wm
, SPITZ_WM_ADDRH
);
732 i2c_set_slave_address(wm
, SPITZ_WM_ADDRL
);
735 static void spitz_i2c_setup(PXA2xxState
*cpu
)
737 /* Attach the CPU on one end of our I2C bus. */
738 I2CBus
*bus
= pxa2xx_i2c_bus(cpu
->i2c
[0]);
742 /* Attach a WM8750 to the bus */
743 wm
= i2c_create_slave(bus
, "wm8750", 0);
745 spitz_wm8750_addr(wm
, 0, 0);
746 qdev_connect_gpio_out(cpu
->gpio
, SPITZ_GPIO_WM
,
747 qemu_allocate_irqs(spitz_wm8750_addr
, wm
, 1)[0]);
748 /* .. and to the sound interface. */
749 cpu
->i2s
->opaque
= wm
;
750 cpu
->i2s
->codec_out
= wm8750_dac_dat
;
751 cpu
->i2s
->codec_in
= wm8750_adc_dat
;
752 wm8750_data_req_set(wm
, cpu
->i2s
->data_req
, cpu
->i2s
);
755 static void spitz_akita_i2c_setup(PXA2xxState
*cpu
)
757 /* Attach a Max7310 to Akita I2C bus. */
758 i2c_create_slave(pxa2xx_i2c_bus(cpu
->i2c
[0]), "max7310",
762 /* Other peripherals */
764 static void spitz_out_switch(void *opaque
, int line
, int level
)
768 zaurus_printf("Charging %s.\n", level
? "off" : "on");
771 zaurus_printf("Discharging %s.\n", level
? "on" : "off");
774 zaurus_printf("Green LED %s.\n", level
? "on" : "off");
777 zaurus_printf("Orange LED %s.\n", level
? "on" : "off");
780 spitz_bl_bit5(opaque
, line
, level
);
783 spitz_bl_power(opaque
, line
, level
);
786 spitz_adc_temp_on(opaque
, line
, level
);
791 #define SPITZ_SCP_LED_GREEN 1
792 #define SPITZ_SCP_JK_B 2
793 #define SPITZ_SCP_CHRG_ON 3
794 #define SPITZ_SCP_MUTE_L 4
795 #define SPITZ_SCP_MUTE_R 5
796 #define SPITZ_SCP_CF_POWER 6
797 #define SPITZ_SCP_LED_ORANGE 7
798 #define SPITZ_SCP_JK_A 8
799 #define SPITZ_SCP_ADC_TEMP_ON 9
800 #define SPITZ_SCP2_IR_ON 1
801 #define SPITZ_SCP2_AKIN_PULLUP 2
802 #define SPITZ_SCP2_BACKLIGHT_CONT 7
803 #define SPITZ_SCP2_BACKLIGHT_ON 8
804 #define SPITZ_SCP2_MIC_BIAS 9
806 static void spitz_scoop_gpio_setup(PXA2xxState
*cpu
,
807 DeviceState
*scp0
, DeviceState
*scp1
)
809 qemu_irq
*outsignals
= qemu_allocate_irqs(spitz_out_switch
, cpu
, 8);
811 qdev_connect_gpio_out(scp0
, SPITZ_SCP_CHRG_ON
, outsignals
[0]);
812 qdev_connect_gpio_out(scp0
, SPITZ_SCP_JK_B
, outsignals
[1]);
813 qdev_connect_gpio_out(scp0
, SPITZ_SCP_LED_GREEN
, outsignals
[2]);
814 qdev_connect_gpio_out(scp0
, SPITZ_SCP_LED_ORANGE
, outsignals
[3]);
817 qdev_connect_gpio_out(scp1
, SPITZ_SCP2_BACKLIGHT_CONT
, outsignals
[4]);
818 qdev_connect_gpio_out(scp1
, SPITZ_SCP2_BACKLIGHT_ON
, outsignals
[5]);
821 qdev_connect_gpio_out(scp0
, SPITZ_SCP_ADC_TEMP_ON
, outsignals
[6]);
824 #define SPITZ_GPIO_HSYNC 22
825 #define SPITZ_GPIO_SD_DETECT 9
826 #define SPITZ_GPIO_SD_WP 81
827 #define SPITZ_GPIO_ON_RESET 89
828 #define SPITZ_GPIO_BAT_COVER 90
829 #define SPITZ_GPIO_CF1_IRQ 105
830 #define SPITZ_GPIO_CF1_CD 94
831 #define SPITZ_GPIO_CF2_IRQ 106
832 #define SPITZ_GPIO_CF2_CD 93
834 static int spitz_hsync
;
836 static void spitz_lcd_hsync_handler(void *opaque
, int line
, int level
)
838 PXA2xxState
*cpu
= (PXA2xxState
*) opaque
;
839 qemu_set_irq(qdev_get_gpio_in(cpu
->gpio
, SPITZ_GPIO_HSYNC
), spitz_hsync
);
843 static void spitz_gpio_setup(PXA2xxState
*cpu
, int slots
)
847 * Bad hack: We toggle the LCD hsync GPIO on every GPIO status
848 * read to satisfy broken guests that poll-wait for hsync.
849 * Simulating a real hsync event would be less practical and
850 * wouldn't guarantee that a guest ever exits the loop.
853 lcd_hsync
= qemu_allocate_irqs(spitz_lcd_hsync_handler
, cpu
, 1)[0];
854 pxa2xx_gpio_read_notifier(cpu
->gpio
, lcd_hsync
);
855 pxa2xx_lcd_vsync_notifier(cpu
->lcd
, lcd_hsync
);
858 pxa2xx_mmci_handlers(cpu
->mmc
,
859 qdev_get_gpio_in(cpu
->gpio
, SPITZ_GPIO_SD_WP
),
860 qdev_get_gpio_in(cpu
->gpio
, SPITZ_GPIO_SD_DETECT
));
862 /* Battery lock always closed */
863 qemu_irq_raise(qdev_get_gpio_in(cpu
->gpio
, SPITZ_GPIO_BAT_COVER
));
866 qdev_connect_gpio_out(cpu
->gpio
, SPITZ_GPIO_ON_RESET
, cpu
->reset
);
868 /* PCMCIA signals: card's IRQ and Card-Detect */
870 pxa2xx_pcmcia_set_irq_cb(cpu
->pcmcia
[0],
871 qdev_get_gpio_in(cpu
->gpio
, SPITZ_GPIO_CF1_IRQ
),
872 qdev_get_gpio_in(cpu
->gpio
, SPITZ_GPIO_CF1_CD
));
874 pxa2xx_pcmcia_set_irq_cb(cpu
->pcmcia
[1],
875 qdev_get_gpio_in(cpu
->gpio
, SPITZ_GPIO_CF2_IRQ
),
876 qdev_get_gpio_in(cpu
->gpio
, SPITZ_GPIO_CF2_CD
));
880 enum spitz_model_e
{ spitz
, akita
, borzoi
, terrier
};
882 #define SPITZ_RAM 0x04000000
883 #define SPITZ_ROM 0x00800000
885 static struct arm_boot_info spitz_binfo
= {
886 .loader_start
= PXA2XX_SDRAM_BASE
,
887 .ram_size
= 0x04000000,
890 static void spitz_common_init(MachineState
*machine
,
891 enum spitz_model_e model
, int arm_id
)
894 DeviceState
*scp0
, *scp1
= NULL
;
895 MemoryRegion
*address_space_mem
= get_system_memory();
896 MemoryRegion
*rom
= g_new(MemoryRegion
, 1);
897 const char *cpu_model
= machine
->cpu_model
;
900 cpu_model
= (model
== terrier
) ? "pxa270-c5" : "pxa270-c0";
902 /* Setup CPU & memory */
903 mpu
= pxa270_init(address_space_mem
, spitz_binfo
.ram_size
, cpu_model
);
905 sl_flash_register(mpu
, (model
== spitz
) ? FLASH_128M
: FLASH_1024M
);
907 memory_region_init_ram(rom
, NULL
, "spitz.rom", SPITZ_ROM
);
908 vmstate_register_ram_global(rom
);
909 memory_region_set_readonly(rom
, true);
910 memory_region_add_subregion(address_space_mem
, 0, rom
);
912 /* Setup peripherals */
913 spitz_keyboard_register(mpu
);
915 spitz_ssp_attach(mpu
);
917 scp0
= sysbus_create_simple("scoop", 0x10800000, NULL
);
918 if (model
!= akita
) {
919 scp1
= sysbus_create_simple("scoop", 0x08800040, NULL
);
922 spitz_scoop_gpio_setup(mpu
, scp0
, scp1
);
924 spitz_gpio_setup(mpu
, (model
== akita
) ? 1 : 2);
926 spitz_i2c_setup(mpu
);
929 spitz_akita_i2c_setup(mpu
);
931 if (model
== terrier
)
932 /* A 6.0 GB microdrive is permanently sitting in CF slot 1. */
933 spitz_microdrive_attach(mpu
, 1);
934 else if (model
!= akita
)
935 /* A 4.0 GB microdrive is permanently sitting in CF slot 0. */
936 spitz_microdrive_attach(mpu
, 0);
938 spitz_binfo
.kernel_filename
= machine
->kernel_filename
;
939 spitz_binfo
.kernel_cmdline
= machine
->kernel_cmdline
;
940 spitz_binfo
.initrd_filename
= machine
->initrd_filename
;
941 spitz_binfo
.board_id
= arm_id
;
942 arm_load_kernel(mpu
->cpu
, &spitz_binfo
);
943 sl_bootparam_write(SL_PXA_PARAM_BASE
);
946 static void spitz_init(MachineState
*machine
)
948 spitz_common_init(machine
, spitz
, 0x2c9);
951 static void borzoi_init(MachineState
*machine
)
953 spitz_common_init(machine
, borzoi
, 0x33f);
956 static void akita_init(MachineState
*machine
)
958 spitz_common_init(machine
, akita
, 0x2e8);
961 static void terrier_init(MachineState
*machine
)
963 spitz_common_init(machine
, terrier
, 0x33f);
966 static QEMUMachine akitapda_machine
= {
968 .desc
= "Akita PDA (PXA270)",
972 static QEMUMachine spitzpda_machine
= {
974 .desc
= "Spitz PDA (PXA270)",
978 static QEMUMachine borzoipda_machine
= {
980 .desc
= "Borzoi PDA (PXA270)",
984 static QEMUMachine terrierpda_machine
= {
986 .desc
= "Terrier PDA (PXA270)",
987 .init
= terrier_init
,
990 static void spitz_machine_init(void)
992 qemu_register_machine(&akitapda_machine
);
993 qemu_register_machine(&spitzpda_machine
);
994 qemu_register_machine(&borzoipda_machine
);
995 qemu_register_machine(&terrierpda_machine
);
998 machine_init(spitz_machine_init
);
1000 static bool is_version_0(void *opaque
, int version_id
)
1002 return version_id
== 0;
1005 static VMStateDescription vmstate_sl_nand_info
= {
1008 .minimum_version_id
= 0,
1009 .fields
= (VMStateField
[]) {
1010 VMSTATE_UINT8(ctl
, SLNANDState
),
1011 VMSTATE_STRUCT(ecc
, SLNANDState
, 0, vmstate_ecc_state
, ECCState
),
1012 VMSTATE_END_OF_LIST(),
1016 static Property sl_nand_properties
[] = {
1017 DEFINE_PROP_UINT8("manf_id", SLNANDState
, manf_id
, NAND_MFR_SAMSUNG
),
1018 DEFINE_PROP_UINT8("chip_id", SLNANDState
, chip_id
, 0xf1),
1019 DEFINE_PROP_END_OF_LIST(),
1022 static void sl_nand_class_init(ObjectClass
*klass
, void *data
)
1024 DeviceClass
*dc
= DEVICE_CLASS(klass
);
1025 SysBusDeviceClass
*k
= SYS_BUS_DEVICE_CLASS(klass
);
1027 k
->init
= sl_nand_init
;
1028 dc
->vmsd
= &vmstate_sl_nand_info
;
1029 dc
->props
= sl_nand_properties
;
1032 static const TypeInfo sl_nand_info
= {
1033 .name
= TYPE_SL_NAND
,
1034 .parent
= TYPE_SYS_BUS_DEVICE
,
1035 .instance_size
= sizeof(SLNANDState
),
1036 .class_init
= sl_nand_class_init
,
1039 static VMStateDescription vmstate_spitz_kbd
= {
1040 .name
= "spitz-keyboard",
1042 .minimum_version_id
= 0,
1043 .post_load
= spitz_keyboard_post_load
,
1044 .fields
= (VMStateField
[]) {
1045 VMSTATE_UINT16(sense_state
, SpitzKeyboardState
),
1046 VMSTATE_UINT16(strobe_state
, SpitzKeyboardState
),
1047 VMSTATE_UNUSED_TEST(is_version_0
, 5),
1048 VMSTATE_END_OF_LIST(),
1052 static Property spitz_keyboard_properties
[] = {
1053 DEFINE_PROP_END_OF_LIST(),
1056 static void spitz_keyboard_class_init(ObjectClass
*klass
, void *data
)
1058 DeviceClass
*dc
= DEVICE_CLASS(klass
);
1059 SysBusDeviceClass
*k
= SYS_BUS_DEVICE_CLASS(klass
);
1061 k
->init
= spitz_keyboard_init
;
1062 dc
->vmsd
= &vmstate_spitz_kbd
;
1063 dc
->props
= spitz_keyboard_properties
;
1066 static const TypeInfo spitz_keyboard_info
= {
1067 .name
= TYPE_SPITZ_KEYBOARD
,
1068 .parent
= TYPE_SYS_BUS_DEVICE
,
1069 .instance_size
= sizeof(SpitzKeyboardState
),
1070 .class_init
= spitz_keyboard_class_init
,
1073 static const VMStateDescription vmstate_corgi_ssp_regs
= {
1074 .name
= "corgi-ssp",
1076 .minimum_version_id
= 2,
1077 .fields
= (VMStateField
[]) {
1078 VMSTATE_SSI_SLAVE(ssidev
, CorgiSSPState
),
1079 VMSTATE_UINT32_ARRAY(enable
, CorgiSSPState
, 3),
1080 VMSTATE_END_OF_LIST(),
1084 static void corgi_ssp_class_init(ObjectClass
*klass
, void *data
)
1086 DeviceClass
*dc
= DEVICE_CLASS(klass
);
1087 SSISlaveClass
*k
= SSI_SLAVE_CLASS(klass
);
1089 k
->init
= corgi_ssp_init
;
1090 k
->transfer
= corgi_ssp_transfer
;
1091 dc
->vmsd
= &vmstate_corgi_ssp_regs
;
1094 static const TypeInfo corgi_ssp_info
= {
1095 .name
= "corgi-ssp",
1096 .parent
= TYPE_SSI_SLAVE
,
1097 .instance_size
= sizeof(CorgiSSPState
),
1098 .class_init
= corgi_ssp_class_init
,
1101 static const VMStateDescription vmstate_spitz_lcdtg_regs
= {
1102 .name
= "spitz-lcdtg",
1104 .minimum_version_id
= 1,
1105 .fields
= (VMStateField
[]) {
1106 VMSTATE_SSI_SLAVE(ssidev
, SpitzLCDTG
),
1107 VMSTATE_UINT32(bl_intensity
, SpitzLCDTG
),
1108 VMSTATE_UINT32(bl_power
, SpitzLCDTG
),
1109 VMSTATE_END_OF_LIST(),
1113 static void spitz_lcdtg_class_init(ObjectClass
*klass
, void *data
)
1115 DeviceClass
*dc
= DEVICE_CLASS(klass
);
1116 SSISlaveClass
*k
= SSI_SLAVE_CLASS(klass
);
1118 k
->init
= spitz_lcdtg_init
;
1119 k
->transfer
= spitz_lcdtg_transfer
;
1120 dc
->vmsd
= &vmstate_spitz_lcdtg_regs
;
1123 static const TypeInfo spitz_lcdtg_info
= {
1124 .name
= "spitz-lcdtg",
1125 .parent
= TYPE_SSI_SLAVE
,
1126 .instance_size
= sizeof(SpitzLCDTG
),
1127 .class_init
= spitz_lcdtg_class_init
,
1130 static void spitz_register_types(void)
1132 type_register_static(&corgi_ssp_info
);
1133 type_register_static(&spitz_lcdtg_info
);
1134 type_register_static(&spitz_keyboard_info
);
1135 type_register_static(&sl_nand_info
);
1138 type_init(spitz_register_types
)