qemu-iotests: Test progress output for conversion
[qemu.git] / block.c
blob38bbdf308384acca5d0283059f28f2db1786b1ce
1 /*
2 * QEMU System Emulator block driver
4 * Copyright (c) 2003 Fabrice Bellard
6 * Permission is hereby granted, free of charge, to any person obtaining a copy
7 * of this software and associated documentation files (the "Software"), to deal
8 * in the Software without restriction, including without limitation the rights
9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10 * copies of the Software, and to permit persons to whom the Software is
11 * furnished to do so, subject to the following conditions:
13 * The above copyright notice and this permission notice shall be included in
14 * all copies or substantial portions of the Software.
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
22 * THE SOFTWARE.
24 #include "config-host.h"
25 #include "qemu-common.h"
26 #include "trace.h"
27 #include "monitor/monitor.h"
28 #include "block/block_int.h"
29 #include "block/blockjob.h"
30 #include "qemu/module.h"
31 #include "qapi/qmp/qjson.h"
32 #include "sysemu/sysemu.h"
33 #include "qemu/notify.h"
34 #include "block/coroutine.h"
35 #include "block/qapi.h"
36 #include "qmp-commands.h"
37 #include "qemu/timer.h"
39 #ifdef CONFIG_BSD
40 #include <sys/types.h>
41 #include <sys/stat.h>
42 #include <sys/ioctl.h>
43 #include <sys/queue.h>
44 #ifndef __DragonFly__
45 #include <sys/disk.h>
46 #endif
47 #endif
49 #ifdef _WIN32
50 #include <windows.h>
51 #endif
53 struct BdrvDirtyBitmap {
54 HBitmap *bitmap;
55 QLIST_ENTRY(BdrvDirtyBitmap) list;
58 #define NOT_DONE 0x7fffffff /* used while emulated sync operation in progress */
60 static void bdrv_dev_change_media_cb(BlockDriverState *bs, bool load);
61 static BlockDriverAIOCB *bdrv_aio_readv_em(BlockDriverState *bs,
62 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
63 BlockDriverCompletionFunc *cb, void *opaque);
64 static BlockDriverAIOCB *bdrv_aio_writev_em(BlockDriverState *bs,
65 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
66 BlockDriverCompletionFunc *cb, void *opaque);
67 static int coroutine_fn bdrv_co_readv_em(BlockDriverState *bs,
68 int64_t sector_num, int nb_sectors,
69 QEMUIOVector *iov);
70 static int coroutine_fn bdrv_co_writev_em(BlockDriverState *bs,
71 int64_t sector_num, int nb_sectors,
72 QEMUIOVector *iov);
73 static int coroutine_fn bdrv_co_do_preadv(BlockDriverState *bs,
74 int64_t offset, unsigned int bytes, QEMUIOVector *qiov,
75 BdrvRequestFlags flags);
76 static int coroutine_fn bdrv_co_do_pwritev(BlockDriverState *bs,
77 int64_t offset, unsigned int bytes, QEMUIOVector *qiov,
78 BdrvRequestFlags flags);
79 static BlockDriverAIOCB *bdrv_co_aio_rw_vector(BlockDriverState *bs,
80 int64_t sector_num,
81 QEMUIOVector *qiov,
82 int nb_sectors,
83 BdrvRequestFlags flags,
84 BlockDriverCompletionFunc *cb,
85 void *opaque,
86 bool is_write);
87 static void coroutine_fn bdrv_co_do_rw(void *opaque);
88 static int coroutine_fn bdrv_co_do_write_zeroes(BlockDriverState *bs,
89 int64_t sector_num, int nb_sectors, BdrvRequestFlags flags);
91 static QTAILQ_HEAD(, BlockDriverState) bdrv_states =
92 QTAILQ_HEAD_INITIALIZER(bdrv_states);
94 static QTAILQ_HEAD(, BlockDriverState) graph_bdrv_states =
95 QTAILQ_HEAD_INITIALIZER(graph_bdrv_states);
97 static QLIST_HEAD(, BlockDriver) bdrv_drivers =
98 QLIST_HEAD_INITIALIZER(bdrv_drivers);
100 /* If non-zero, use only whitelisted block drivers */
101 static int use_bdrv_whitelist;
103 #ifdef _WIN32
104 static int is_windows_drive_prefix(const char *filename)
106 return (((filename[0] >= 'a' && filename[0] <= 'z') ||
107 (filename[0] >= 'A' && filename[0] <= 'Z')) &&
108 filename[1] == ':');
111 int is_windows_drive(const char *filename)
113 if (is_windows_drive_prefix(filename) &&
114 filename[2] == '\0')
115 return 1;
116 if (strstart(filename, "\\\\.\\", NULL) ||
117 strstart(filename, "//./", NULL))
118 return 1;
119 return 0;
121 #endif
123 /* throttling disk I/O limits */
124 void bdrv_set_io_limits(BlockDriverState *bs,
125 ThrottleConfig *cfg)
127 int i;
129 throttle_config(&bs->throttle_state, cfg);
131 for (i = 0; i < 2; i++) {
132 qemu_co_enter_next(&bs->throttled_reqs[i]);
136 /* this function drain all the throttled IOs */
137 static bool bdrv_start_throttled_reqs(BlockDriverState *bs)
139 bool drained = false;
140 bool enabled = bs->io_limits_enabled;
141 int i;
143 bs->io_limits_enabled = false;
145 for (i = 0; i < 2; i++) {
146 while (qemu_co_enter_next(&bs->throttled_reqs[i])) {
147 drained = true;
151 bs->io_limits_enabled = enabled;
153 return drained;
156 void bdrv_io_limits_disable(BlockDriverState *bs)
158 bs->io_limits_enabled = false;
160 bdrv_start_throttled_reqs(bs);
162 throttle_destroy(&bs->throttle_state);
165 static void bdrv_throttle_read_timer_cb(void *opaque)
167 BlockDriverState *bs = opaque;
168 qemu_co_enter_next(&bs->throttled_reqs[0]);
171 static void bdrv_throttle_write_timer_cb(void *opaque)
173 BlockDriverState *bs = opaque;
174 qemu_co_enter_next(&bs->throttled_reqs[1]);
177 /* should be called before bdrv_set_io_limits if a limit is set */
178 void bdrv_io_limits_enable(BlockDriverState *bs)
180 assert(!bs->io_limits_enabled);
181 throttle_init(&bs->throttle_state,
182 QEMU_CLOCK_VIRTUAL,
183 bdrv_throttle_read_timer_cb,
184 bdrv_throttle_write_timer_cb,
185 bs);
186 bs->io_limits_enabled = true;
189 /* This function makes an IO wait if needed
191 * @nb_sectors: the number of sectors of the IO
192 * @is_write: is the IO a write
194 static void bdrv_io_limits_intercept(BlockDriverState *bs,
195 unsigned int bytes,
196 bool is_write)
198 /* does this io must wait */
199 bool must_wait = throttle_schedule_timer(&bs->throttle_state, is_write);
201 /* if must wait or any request of this type throttled queue the IO */
202 if (must_wait ||
203 !qemu_co_queue_empty(&bs->throttled_reqs[is_write])) {
204 qemu_co_queue_wait(&bs->throttled_reqs[is_write]);
207 /* the IO will be executed, do the accounting */
208 throttle_account(&bs->throttle_state, is_write, bytes);
211 /* if the next request must wait -> do nothing */
212 if (throttle_schedule_timer(&bs->throttle_state, is_write)) {
213 return;
216 /* else queue next request for execution */
217 qemu_co_queue_next(&bs->throttled_reqs[is_write]);
220 size_t bdrv_opt_mem_align(BlockDriverState *bs)
222 if (!bs || !bs->drv) {
223 /* 4k should be on the safe side */
224 return 4096;
227 return bs->bl.opt_mem_alignment;
230 /* check if the path starts with "<protocol>:" */
231 static int path_has_protocol(const char *path)
233 const char *p;
235 #ifdef _WIN32
236 if (is_windows_drive(path) ||
237 is_windows_drive_prefix(path)) {
238 return 0;
240 p = path + strcspn(path, ":/\\");
241 #else
242 p = path + strcspn(path, ":/");
243 #endif
245 return *p == ':';
248 int path_is_absolute(const char *path)
250 #ifdef _WIN32
251 /* specific case for names like: "\\.\d:" */
252 if (is_windows_drive(path) || is_windows_drive_prefix(path)) {
253 return 1;
255 return (*path == '/' || *path == '\\');
256 #else
257 return (*path == '/');
258 #endif
261 /* if filename is absolute, just copy it to dest. Otherwise, build a
262 path to it by considering it is relative to base_path. URL are
263 supported. */
264 void path_combine(char *dest, int dest_size,
265 const char *base_path,
266 const char *filename)
268 const char *p, *p1;
269 int len;
271 if (dest_size <= 0)
272 return;
273 if (path_is_absolute(filename)) {
274 pstrcpy(dest, dest_size, filename);
275 } else {
276 p = strchr(base_path, ':');
277 if (p)
278 p++;
279 else
280 p = base_path;
281 p1 = strrchr(base_path, '/');
282 #ifdef _WIN32
284 const char *p2;
285 p2 = strrchr(base_path, '\\');
286 if (!p1 || p2 > p1)
287 p1 = p2;
289 #endif
290 if (p1)
291 p1++;
292 else
293 p1 = base_path;
294 if (p1 > p)
295 p = p1;
296 len = p - base_path;
297 if (len > dest_size - 1)
298 len = dest_size - 1;
299 memcpy(dest, base_path, len);
300 dest[len] = '\0';
301 pstrcat(dest, dest_size, filename);
305 void bdrv_get_full_backing_filename(BlockDriverState *bs, char *dest, size_t sz)
307 if (bs->backing_file[0] == '\0' || path_has_protocol(bs->backing_file)) {
308 pstrcpy(dest, sz, bs->backing_file);
309 } else {
310 path_combine(dest, sz, bs->filename, bs->backing_file);
314 void bdrv_register(BlockDriver *bdrv)
316 /* Block drivers without coroutine functions need emulation */
317 if (!bdrv->bdrv_co_readv) {
318 bdrv->bdrv_co_readv = bdrv_co_readv_em;
319 bdrv->bdrv_co_writev = bdrv_co_writev_em;
321 /* bdrv_co_readv_em()/brdv_co_writev_em() work in terms of aio, so if
322 * the block driver lacks aio we need to emulate that too.
324 if (!bdrv->bdrv_aio_readv) {
325 /* add AIO emulation layer */
326 bdrv->bdrv_aio_readv = bdrv_aio_readv_em;
327 bdrv->bdrv_aio_writev = bdrv_aio_writev_em;
331 QLIST_INSERT_HEAD(&bdrv_drivers, bdrv, list);
334 /* create a new block device (by default it is empty) */
335 BlockDriverState *bdrv_new(const char *device_name)
337 BlockDriverState *bs;
339 bs = g_malloc0(sizeof(BlockDriverState));
340 QLIST_INIT(&bs->dirty_bitmaps);
341 pstrcpy(bs->device_name, sizeof(bs->device_name), device_name);
342 if (device_name[0] != '\0') {
343 QTAILQ_INSERT_TAIL(&bdrv_states, bs, device_list);
345 bdrv_iostatus_disable(bs);
346 notifier_list_init(&bs->close_notifiers);
347 notifier_with_return_list_init(&bs->before_write_notifiers);
348 qemu_co_queue_init(&bs->throttled_reqs[0]);
349 qemu_co_queue_init(&bs->throttled_reqs[1]);
350 bs->refcnt = 1;
352 return bs;
355 void bdrv_add_close_notifier(BlockDriverState *bs, Notifier *notify)
357 notifier_list_add(&bs->close_notifiers, notify);
360 BlockDriver *bdrv_find_format(const char *format_name)
362 BlockDriver *drv1;
363 QLIST_FOREACH(drv1, &bdrv_drivers, list) {
364 if (!strcmp(drv1->format_name, format_name)) {
365 return drv1;
368 return NULL;
371 static int bdrv_is_whitelisted(BlockDriver *drv, bool read_only)
373 static const char *whitelist_rw[] = {
374 CONFIG_BDRV_RW_WHITELIST
376 static const char *whitelist_ro[] = {
377 CONFIG_BDRV_RO_WHITELIST
379 const char **p;
381 if (!whitelist_rw[0] && !whitelist_ro[0]) {
382 return 1; /* no whitelist, anything goes */
385 for (p = whitelist_rw; *p; p++) {
386 if (!strcmp(drv->format_name, *p)) {
387 return 1;
390 if (read_only) {
391 for (p = whitelist_ro; *p; p++) {
392 if (!strcmp(drv->format_name, *p)) {
393 return 1;
397 return 0;
400 BlockDriver *bdrv_find_whitelisted_format(const char *format_name,
401 bool read_only)
403 BlockDriver *drv = bdrv_find_format(format_name);
404 return drv && bdrv_is_whitelisted(drv, read_only) ? drv : NULL;
407 typedef struct CreateCo {
408 BlockDriver *drv;
409 char *filename;
410 QEMUOptionParameter *options;
411 int ret;
412 Error *err;
413 } CreateCo;
415 static void coroutine_fn bdrv_create_co_entry(void *opaque)
417 Error *local_err = NULL;
418 int ret;
420 CreateCo *cco = opaque;
421 assert(cco->drv);
423 ret = cco->drv->bdrv_create(cco->filename, cco->options, &local_err);
424 if (local_err) {
425 error_propagate(&cco->err, local_err);
427 cco->ret = ret;
430 int bdrv_create(BlockDriver *drv, const char* filename,
431 QEMUOptionParameter *options, Error **errp)
433 int ret;
435 Coroutine *co;
436 CreateCo cco = {
437 .drv = drv,
438 .filename = g_strdup(filename),
439 .options = options,
440 .ret = NOT_DONE,
441 .err = NULL,
444 if (!drv->bdrv_create) {
445 error_setg(errp, "Driver '%s' does not support image creation", drv->format_name);
446 ret = -ENOTSUP;
447 goto out;
450 if (qemu_in_coroutine()) {
451 /* Fast-path if already in coroutine context */
452 bdrv_create_co_entry(&cco);
453 } else {
454 co = qemu_coroutine_create(bdrv_create_co_entry);
455 qemu_coroutine_enter(co, &cco);
456 while (cco.ret == NOT_DONE) {
457 qemu_aio_wait();
461 ret = cco.ret;
462 if (ret < 0) {
463 if (cco.err) {
464 error_propagate(errp, cco.err);
465 } else {
466 error_setg_errno(errp, -ret, "Could not create image");
470 out:
471 g_free(cco.filename);
472 return ret;
475 int bdrv_create_file(const char* filename, QEMUOptionParameter *options,
476 Error **errp)
478 BlockDriver *drv;
479 Error *local_err = NULL;
480 int ret;
482 drv = bdrv_find_protocol(filename, true);
483 if (drv == NULL) {
484 error_setg(errp, "Could not find protocol for file '%s'", filename);
485 return -ENOENT;
488 ret = bdrv_create(drv, filename, options, &local_err);
489 if (local_err) {
490 error_propagate(errp, local_err);
492 return ret;
495 int bdrv_refresh_limits(BlockDriverState *bs)
497 BlockDriver *drv = bs->drv;
499 memset(&bs->bl, 0, sizeof(bs->bl));
501 if (!drv) {
502 return 0;
505 /* Take some limits from the children as a default */
506 if (bs->file) {
507 bdrv_refresh_limits(bs->file);
508 bs->bl.opt_transfer_length = bs->file->bl.opt_transfer_length;
509 bs->bl.opt_mem_alignment = bs->file->bl.opt_mem_alignment;
510 } else {
511 bs->bl.opt_mem_alignment = 512;
514 if (bs->backing_hd) {
515 bdrv_refresh_limits(bs->backing_hd);
516 bs->bl.opt_transfer_length =
517 MAX(bs->bl.opt_transfer_length,
518 bs->backing_hd->bl.opt_transfer_length);
519 bs->bl.opt_mem_alignment =
520 MAX(bs->bl.opt_mem_alignment,
521 bs->backing_hd->bl.opt_mem_alignment);
524 /* Then let the driver override it */
525 if (drv->bdrv_refresh_limits) {
526 return drv->bdrv_refresh_limits(bs);
529 return 0;
533 * Create a uniquely-named empty temporary file.
534 * Return 0 upon success, otherwise a negative errno value.
536 int get_tmp_filename(char *filename, int size)
538 #ifdef _WIN32
539 char temp_dir[MAX_PATH];
540 /* GetTempFileName requires that its output buffer (4th param)
541 have length MAX_PATH or greater. */
542 assert(size >= MAX_PATH);
543 return (GetTempPath(MAX_PATH, temp_dir)
544 && GetTempFileName(temp_dir, "qem", 0, filename)
545 ? 0 : -GetLastError());
546 #else
547 int fd;
548 const char *tmpdir;
549 tmpdir = getenv("TMPDIR");
550 if (!tmpdir) {
551 tmpdir = "/var/tmp";
553 if (snprintf(filename, size, "%s/vl.XXXXXX", tmpdir) >= size) {
554 return -EOVERFLOW;
556 fd = mkstemp(filename);
557 if (fd < 0) {
558 return -errno;
560 if (close(fd) != 0) {
561 unlink(filename);
562 return -errno;
564 return 0;
565 #endif
569 * Detect host devices. By convention, /dev/cdrom[N] is always
570 * recognized as a host CDROM.
572 static BlockDriver *find_hdev_driver(const char *filename)
574 int score_max = 0, score;
575 BlockDriver *drv = NULL, *d;
577 QLIST_FOREACH(d, &bdrv_drivers, list) {
578 if (d->bdrv_probe_device) {
579 score = d->bdrv_probe_device(filename);
580 if (score > score_max) {
581 score_max = score;
582 drv = d;
587 return drv;
590 BlockDriver *bdrv_find_protocol(const char *filename,
591 bool allow_protocol_prefix)
593 BlockDriver *drv1;
594 char protocol[128];
595 int len;
596 const char *p;
598 /* TODO Drivers without bdrv_file_open must be specified explicitly */
601 * XXX(hch): we really should not let host device detection
602 * override an explicit protocol specification, but moving this
603 * later breaks access to device names with colons in them.
604 * Thanks to the brain-dead persistent naming schemes on udev-
605 * based Linux systems those actually are quite common.
607 drv1 = find_hdev_driver(filename);
608 if (drv1) {
609 return drv1;
612 if (!path_has_protocol(filename) || !allow_protocol_prefix) {
613 return bdrv_find_format("file");
616 p = strchr(filename, ':');
617 assert(p != NULL);
618 len = p - filename;
619 if (len > sizeof(protocol) - 1)
620 len = sizeof(protocol) - 1;
621 memcpy(protocol, filename, len);
622 protocol[len] = '\0';
623 QLIST_FOREACH(drv1, &bdrv_drivers, list) {
624 if (drv1->protocol_name &&
625 !strcmp(drv1->protocol_name, protocol)) {
626 return drv1;
629 return NULL;
632 static int find_image_format(BlockDriverState *bs, const char *filename,
633 BlockDriver **pdrv, Error **errp)
635 int score, score_max;
636 BlockDriver *drv1, *drv;
637 uint8_t buf[2048];
638 int ret = 0;
640 /* Return the raw BlockDriver * to scsi-generic devices or empty drives */
641 if (bs->sg || !bdrv_is_inserted(bs) || bdrv_getlength(bs) == 0) {
642 drv = bdrv_find_format("raw");
643 if (!drv) {
644 error_setg(errp, "Could not find raw image format");
645 ret = -ENOENT;
647 *pdrv = drv;
648 return ret;
651 ret = bdrv_pread(bs, 0, buf, sizeof(buf));
652 if (ret < 0) {
653 error_setg_errno(errp, -ret, "Could not read image for determining its "
654 "format");
655 *pdrv = NULL;
656 return ret;
659 score_max = 0;
660 drv = NULL;
661 QLIST_FOREACH(drv1, &bdrv_drivers, list) {
662 if (drv1->bdrv_probe) {
663 score = drv1->bdrv_probe(buf, ret, filename);
664 if (score > score_max) {
665 score_max = score;
666 drv = drv1;
670 if (!drv) {
671 error_setg(errp, "Could not determine image format: No compatible "
672 "driver found");
673 ret = -ENOENT;
675 *pdrv = drv;
676 return ret;
680 * Set the current 'total_sectors' value
682 static int refresh_total_sectors(BlockDriverState *bs, int64_t hint)
684 BlockDriver *drv = bs->drv;
686 /* Do not attempt drv->bdrv_getlength() on scsi-generic devices */
687 if (bs->sg)
688 return 0;
690 /* query actual device if possible, otherwise just trust the hint */
691 if (drv->bdrv_getlength) {
692 int64_t length = drv->bdrv_getlength(bs);
693 if (length < 0) {
694 return length;
696 hint = DIV_ROUND_UP(length, BDRV_SECTOR_SIZE);
699 bs->total_sectors = hint;
700 return 0;
704 * Set open flags for a given discard mode
706 * Return 0 on success, -1 if the discard mode was invalid.
708 int bdrv_parse_discard_flags(const char *mode, int *flags)
710 *flags &= ~BDRV_O_UNMAP;
712 if (!strcmp(mode, "off") || !strcmp(mode, "ignore")) {
713 /* do nothing */
714 } else if (!strcmp(mode, "on") || !strcmp(mode, "unmap")) {
715 *flags |= BDRV_O_UNMAP;
716 } else {
717 return -1;
720 return 0;
724 * Set open flags for a given cache mode
726 * Return 0 on success, -1 if the cache mode was invalid.
728 int bdrv_parse_cache_flags(const char *mode, int *flags)
730 *flags &= ~BDRV_O_CACHE_MASK;
732 if (!strcmp(mode, "off") || !strcmp(mode, "none")) {
733 *flags |= BDRV_O_NOCACHE | BDRV_O_CACHE_WB;
734 } else if (!strcmp(mode, "directsync")) {
735 *flags |= BDRV_O_NOCACHE;
736 } else if (!strcmp(mode, "writeback")) {
737 *flags |= BDRV_O_CACHE_WB;
738 } else if (!strcmp(mode, "unsafe")) {
739 *flags |= BDRV_O_CACHE_WB;
740 *flags |= BDRV_O_NO_FLUSH;
741 } else if (!strcmp(mode, "writethrough")) {
742 /* this is the default */
743 } else {
744 return -1;
747 return 0;
751 * The copy-on-read flag is actually a reference count so multiple users may
752 * use the feature without worrying about clobbering its previous state.
753 * Copy-on-read stays enabled until all users have called to disable it.
755 void bdrv_enable_copy_on_read(BlockDriverState *bs)
757 bs->copy_on_read++;
760 void bdrv_disable_copy_on_read(BlockDriverState *bs)
762 assert(bs->copy_on_read > 0);
763 bs->copy_on_read--;
766 static int bdrv_open_flags(BlockDriverState *bs, int flags)
768 int open_flags = flags | BDRV_O_CACHE_WB;
771 * Clear flags that are internal to the block layer before opening the
772 * image.
774 open_flags &= ~(BDRV_O_SNAPSHOT | BDRV_O_NO_BACKING);
777 * Snapshots should be writable.
779 if (bs->is_temporary) {
780 open_flags |= BDRV_O_RDWR;
783 return open_flags;
786 static int bdrv_assign_node_name(BlockDriverState *bs,
787 const char *node_name,
788 Error **errp)
790 if (!node_name) {
791 return 0;
794 /* empty string node name is invalid */
795 if (node_name[0] == '\0') {
796 error_setg(errp, "Empty node name");
797 return -EINVAL;
800 /* takes care of avoiding namespaces collisions */
801 if (bdrv_find(node_name)) {
802 error_setg(errp, "node-name=%s is conflicting with a device id",
803 node_name);
804 return -EINVAL;
807 /* takes care of avoiding duplicates node names */
808 if (bdrv_find_node(node_name)) {
809 error_setg(errp, "Duplicate node name");
810 return -EINVAL;
813 /* copy node name into the bs and insert it into the graph list */
814 pstrcpy(bs->node_name, sizeof(bs->node_name), node_name);
815 QTAILQ_INSERT_TAIL(&graph_bdrv_states, bs, node_list);
817 return 0;
821 * Common part for opening disk images and files
823 * Removes all processed options from *options.
825 static int bdrv_open_common(BlockDriverState *bs, BlockDriverState *file,
826 QDict *options, int flags, BlockDriver *drv, Error **errp)
828 int ret, open_flags;
829 const char *filename;
830 const char *node_name = NULL;
831 Error *local_err = NULL;
833 assert(drv != NULL);
834 assert(bs->file == NULL);
835 assert(options != NULL && bs->options != options);
837 if (file != NULL) {
838 filename = file->filename;
839 } else {
840 filename = qdict_get_try_str(options, "filename");
843 if (drv->bdrv_needs_filename && !filename) {
844 error_setg(errp, "The '%s' block driver requires a file name",
845 drv->format_name);
846 return -EINVAL;
849 trace_bdrv_open_common(bs, filename ?: "", flags, drv->format_name);
851 node_name = qdict_get_try_str(options, "node-name");
852 ret = bdrv_assign_node_name(bs, node_name, errp);
853 if (ret < 0) {
854 return ret;
856 qdict_del(options, "node-name");
858 /* bdrv_open() with directly using a protocol as drv. This layer is already
859 * opened, so assign it to bs (while file becomes a closed BlockDriverState)
860 * and return immediately. */
861 if (file != NULL && drv->bdrv_file_open) {
862 bdrv_swap(file, bs);
863 return 0;
866 bs->open_flags = flags;
867 bs->guest_block_size = 512;
868 bs->request_alignment = 512;
869 bs->zero_beyond_eof = true;
870 open_flags = bdrv_open_flags(bs, flags);
871 bs->read_only = !(open_flags & BDRV_O_RDWR);
873 if (use_bdrv_whitelist && !bdrv_is_whitelisted(drv, bs->read_only)) {
874 error_setg(errp,
875 !bs->read_only && bdrv_is_whitelisted(drv, true)
876 ? "Driver '%s' can only be used for read-only devices"
877 : "Driver '%s' is not whitelisted",
878 drv->format_name);
879 return -ENOTSUP;
882 assert(bs->copy_on_read == 0); /* bdrv_new() and bdrv_close() make it so */
883 if (flags & BDRV_O_COPY_ON_READ) {
884 if (!bs->read_only) {
885 bdrv_enable_copy_on_read(bs);
886 } else {
887 error_setg(errp, "Can't use copy-on-read on read-only device");
888 return -EINVAL;
892 if (filename != NULL) {
893 pstrcpy(bs->filename, sizeof(bs->filename), filename);
894 } else {
895 bs->filename[0] = '\0';
898 bs->drv = drv;
899 bs->opaque = g_malloc0(drv->instance_size);
901 bs->enable_write_cache = !!(flags & BDRV_O_CACHE_WB);
903 /* Open the image, either directly or using a protocol */
904 if (drv->bdrv_file_open) {
905 assert(file == NULL);
906 assert(!drv->bdrv_needs_filename || filename != NULL);
907 ret = drv->bdrv_file_open(bs, options, open_flags, &local_err);
908 } else {
909 if (file == NULL) {
910 error_setg(errp, "Can't use '%s' as a block driver for the "
911 "protocol level", drv->format_name);
912 ret = -EINVAL;
913 goto free_and_fail;
915 bs->file = file;
916 ret = drv->bdrv_open(bs, options, open_flags, &local_err);
919 if (ret < 0) {
920 if (local_err) {
921 error_propagate(errp, local_err);
922 } else if (bs->filename[0]) {
923 error_setg_errno(errp, -ret, "Could not open '%s'", bs->filename);
924 } else {
925 error_setg_errno(errp, -ret, "Could not open image");
927 goto free_and_fail;
930 ret = refresh_total_sectors(bs, bs->total_sectors);
931 if (ret < 0) {
932 error_setg_errno(errp, -ret, "Could not refresh total sector count");
933 goto free_and_fail;
936 bdrv_refresh_limits(bs);
937 assert(bdrv_opt_mem_align(bs) != 0);
938 assert(bs->request_alignment != 0);
940 #ifndef _WIN32
941 if (bs->is_temporary) {
942 assert(bs->filename[0] != '\0');
943 unlink(bs->filename);
945 #endif
946 return 0;
948 free_and_fail:
949 bs->file = NULL;
950 g_free(bs->opaque);
951 bs->opaque = NULL;
952 bs->drv = NULL;
953 return ret;
957 * Opens a file using a protocol (file, host_device, nbd, ...)
959 * options is an indirect pointer to a QDict of options to pass to the block
960 * drivers, or pointer to NULL for an empty set of options. If this function
961 * takes ownership of the QDict reference, it will set *options to NULL;
962 * otherwise, it will contain unused/unrecognized options after this function
963 * returns. Then, the caller is responsible for freeing it. If it intends to
964 * reuse the QDict, QINCREF() should be called beforehand.
966 static int bdrv_file_open(BlockDriverState *bs, const char *filename,
967 QDict **options, int flags, Error **errp)
969 BlockDriver *drv;
970 const char *drvname;
971 bool allow_protocol_prefix = false;
972 Error *local_err = NULL;
973 int ret;
975 /* Fetch the file name from the options QDict if necessary */
976 if (!filename) {
977 filename = qdict_get_try_str(*options, "filename");
978 } else if (filename && !qdict_haskey(*options, "filename")) {
979 qdict_put(*options, "filename", qstring_from_str(filename));
980 allow_protocol_prefix = true;
981 } else {
982 error_setg(errp, "Can't specify 'file' and 'filename' options at the "
983 "same time");
984 ret = -EINVAL;
985 goto fail;
988 /* Find the right block driver */
989 drvname = qdict_get_try_str(*options, "driver");
990 if (drvname) {
991 drv = bdrv_find_format(drvname);
992 if (!drv) {
993 error_setg(errp, "Unknown driver '%s'", drvname);
995 qdict_del(*options, "driver");
996 } else if (filename) {
997 drv = bdrv_find_protocol(filename, allow_protocol_prefix);
998 if (!drv) {
999 error_setg(errp, "Unknown protocol");
1001 } else {
1002 error_setg(errp, "Must specify either driver or file");
1003 drv = NULL;
1006 if (!drv) {
1007 /* errp has been set already */
1008 ret = -ENOENT;
1009 goto fail;
1012 /* Parse the filename and open it */
1013 if (drv->bdrv_parse_filename && filename) {
1014 drv->bdrv_parse_filename(filename, *options, &local_err);
1015 if (local_err) {
1016 error_propagate(errp, local_err);
1017 ret = -EINVAL;
1018 goto fail;
1020 qdict_del(*options, "filename");
1023 if (!drv->bdrv_file_open) {
1024 ret = bdrv_open(&bs, filename, NULL, *options, flags, drv, &local_err);
1025 *options = NULL;
1026 } else {
1027 ret = bdrv_open_common(bs, NULL, *options, flags, drv, &local_err);
1029 if (ret < 0) {
1030 error_propagate(errp, local_err);
1031 goto fail;
1034 bs->growable = 1;
1035 return 0;
1037 fail:
1038 return ret;
1042 * Opens the backing file for a BlockDriverState if not yet open
1044 * options is a QDict of options to pass to the block drivers, or NULL for an
1045 * empty set of options. The reference to the QDict is transferred to this
1046 * function (even on failure), so if the caller intends to reuse the dictionary,
1047 * it needs to use QINCREF() before calling bdrv_file_open.
1049 int bdrv_open_backing_file(BlockDriverState *bs, QDict *options, Error **errp)
1051 char backing_filename[PATH_MAX];
1052 int back_flags, ret;
1053 BlockDriver *back_drv = NULL;
1054 Error *local_err = NULL;
1056 if (bs->backing_hd != NULL) {
1057 QDECREF(options);
1058 return 0;
1061 /* NULL means an empty set of options */
1062 if (options == NULL) {
1063 options = qdict_new();
1066 bs->open_flags &= ~BDRV_O_NO_BACKING;
1067 if (qdict_haskey(options, "file.filename")) {
1068 backing_filename[0] = '\0';
1069 } else if (bs->backing_file[0] == '\0' && qdict_size(options) == 0) {
1070 QDECREF(options);
1071 return 0;
1072 } else {
1073 bdrv_get_full_backing_filename(bs, backing_filename,
1074 sizeof(backing_filename));
1077 if (bs->backing_format[0] != '\0') {
1078 back_drv = bdrv_find_format(bs->backing_format);
1081 /* backing files always opened read-only */
1082 back_flags = bs->open_flags & ~(BDRV_O_RDWR | BDRV_O_SNAPSHOT |
1083 BDRV_O_COPY_ON_READ);
1085 assert(bs->backing_hd == NULL);
1086 ret = bdrv_open(&bs->backing_hd,
1087 *backing_filename ? backing_filename : NULL, NULL, options,
1088 back_flags, back_drv, &local_err);
1089 if (ret < 0) {
1090 bs->backing_hd = NULL;
1091 bs->open_flags |= BDRV_O_NO_BACKING;
1092 error_setg(errp, "Could not open backing file: %s",
1093 error_get_pretty(local_err));
1094 error_free(local_err);
1095 return ret;
1098 if (bs->backing_hd->file) {
1099 pstrcpy(bs->backing_file, sizeof(bs->backing_file),
1100 bs->backing_hd->file->filename);
1103 /* Recalculate the BlockLimits with the backing file */
1104 bdrv_refresh_limits(bs);
1106 return 0;
1110 * Opens a disk image whose options are given as BlockdevRef in another block
1111 * device's options.
1113 * If allow_none is true, no image will be opened if filename is false and no
1114 * BlockdevRef is given. *pbs will remain unchanged and 0 will be returned.
1116 * bdrev_key specifies the key for the image's BlockdevRef in the options QDict.
1117 * That QDict has to be flattened; therefore, if the BlockdevRef is a QDict
1118 * itself, all options starting with "${bdref_key}." are considered part of the
1119 * BlockdevRef.
1121 * The BlockdevRef will be removed from the options QDict.
1123 * To conform with the behavior of bdrv_open(), *pbs has to be NULL.
1125 int bdrv_open_image(BlockDriverState **pbs, const char *filename,
1126 QDict *options, const char *bdref_key, int flags,
1127 bool allow_none, Error **errp)
1129 QDict *image_options;
1130 int ret;
1131 char *bdref_key_dot;
1132 const char *reference;
1134 assert(pbs);
1135 assert(*pbs == NULL);
1137 bdref_key_dot = g_strdup_printf("%s.", bdref_key);
1138 qdict_extract_subqdict(options, &image_options, bdref_key_dot);
1139 g_free(bdref_key_dot);
1141 reference = qdict_get_try_str(options, bdref_key);
1142 if (!filename && !reference && !qdict_size(image_options)) {
1143 if (allow_none) {
1144 ret = 0;
1145 } else {
1146 error_setg(errp, "A block device must be specified for \"%s\"",
1147 bdref_key);
1148 ret = -EINVAL;
1150 goto done;
1153 ret = bdrv_open(pbs, filename, reference, image_options, flags, NULL, errp);
1155 done:
1156 qdict_del(options, bdref_key);
1157 return ret;
1161 * Opens a disk image (raw, qcow2, vmdk, ...)
1163 * options is a QDict of options to pass to the block drivers, or NULL for an
1164 * empty set of options. The reference to the QDict belongs to the block layer
1165 * after the call (even on failure), so if the caller intends to reuse the
1166 * dictionary, it needs to use QINCREF() before calling bdrv_open.
1168 * If *pbs is NULL, a new BDS will be created with a pointer to it stored there.
1169 * If it is not NULL, the referenced BDS will be reused.
1171 * The reference parameter may be used to specify an existing block device which
1172 * should be opened. If specified, neither options nor a filename may be given,
1173 * nor can an existing BDS be reused (that is, *pbs has to be NULL).
1175 int bdrv_open(BlockDriverState **pbs, const char *filename,
1176 const char *reference, QDict *options, int flags,
1177 BlockDriver *drv, Error **errp)
1179 int ret;
1180 /* TODO: extra byte is a hack to ensure MAX_PATH space on Windows. */
1181 char tmp_filename[PATH_MAX + 1];
1182 BlockDriverState *file = NULL, *bs;
1183 const char *drvname;
1184 Error *local_err = NULL;
1186 assert(pbs);
1188 if (reference) {
1189 bool options_non_empty = options ? qdict_size(options) : false;
1190 QDECREF(options);
1192 if (*pbs) {
1193 error_setg(errp, "Cannot reuse an existing BDS when referencing "
1194 "another block device");
1195 return -EINVAL;
1198 if (filename || options_non_empty) {
1199 error_setg(errp, "Cannot reference an existing block device with "
1200 "additional options or a new filename");
1201 return -EINVAL;
1204 bs = bdrv_lookup_bs(reference, reference, errp);
1205 if (!bs) {
1206 return -ENODEV;
1208 bdrv_ref(bs);
1209 *pbs = bs;
1210 return 0;
1213 if (*pbs) {
1214 bs = *pbs;
1215 } else {
1216 bs = bdrv_new("");
1219 /* NULL means an empty set of options */
1220 if (options == NULL) {
1221 options = qdict_new();
1224 bs->options = options;
1225 options = qdict_clone_shallow(options);
1227 if (flags & BDRV_O_PROTOCOL) {
1228 assert(!drv);
1229 ret = bdrv_file_open(bs, filename, &options, flags & ~BDRV_O_PROTOCOL,
1230 &local_err);
1231 if (!ret) {
1232 goto done;
1233 } else if (bs->drv) {
1234 goto close_and_fail;
1235 } else {
1236 goto fail;
1240 /* For snapshot=on, create a temporary qcow2 overlay */
1241 if (flags & BDRV_O_SNAPSHOT) {
1242 BlockDriverState *bs1;
1243 int64_t total_size;
1244 BlockDriver *bdrv_qcow2;
1245 QEMUOptionParameter *create_options;
1246 QDict *snapshot_options;
1248 /* if snapshot, we create a temporary backing file and open it
1249 instead of opening 'filename' directly */
1251 /* Get the required size from the image */
1252 QINCREF(options);
1253 bs1 = NULL;
1254 ret = bdrv_open(&bs1, filename, NULL, options, BDRV_O_NO_BACKING,
1255 drv, &local_err);
1256 if (ret < 0) {
1257 goto fail;
1259 total_size = bdrv_getlength(bs1) & BDRV_SECTOR_MASK;
1261 bdrv_unref(bs1);
1263 /* Create the temporary image */
1264 ret = get_tmp_filename(tmp_filename, sizeof(tmp_filename));
1265 if (ret < 0) {
1266 error_setg_errno(errp, -ret, "Could not get temporary filename");
1267 goto fail;
1270 bdrv_qcow2 = bdrv_find_format("qcow2");
1271 create_options = parse_option_parameters("", bdrv_qcow2->create_options,
1272 NULL);
1274 set_option_parameter_int(create_options, BLOCK_OPT_SIZE, total_size);
1276 ret = bdrv_create(bdrv_qcow2, tmp_filename, create_options, &local_err);
1277 free_option_parameters(create_options);
1278 if (ret < 0) {
1279 error_setg_errno(errp, -ret, "Could not create temporary overlay "
1280 "'%s': %s", tmp_filename,
1281 error_get_pretty(local_err));
1282 error_free(local_err);
1283 local_err = NULL;
1284 goto fail;
1287 /* Prepare a new options QDict for the temporary file, where user
1288 * options refer to the backing file */
1289 if (filename) {
1290 qdict_put(options, "file.filename", qstring_from_str(filename));
1292 if (drv) {
1293 qdict_put(options, "driver", qstring_from_str(drv->format_name));
1296 snapshot_options = qdict_new();
1297 qdict_put(snapshot_options, "backing", options);
1298 qdict_flatten(snapshot_options);
1300 bs->options = snapshot_options;
1301 options = qdict_clone_shallow(bs->options);
1303 filename = tmp_filename;
1304 drv = bdrv_qcow2;
1305 bs->is_temporary = 1;
1308 /* Open image file without format layer */
1309 if (flags & BDRV_O_RDWR) {
1310 flags |= BDRV_O_ALLOW_RDWR;
1313 assert(file == NULL);
1314 ret = bdrv_open_image(&file, filename, options, "file",
1315 bdrv_open_flags(bs, flags | BDRV_O_UNMAP) |
1316 BDRV_O_PROTOCOL, true, &local_err);
1317 if (ret < 0) {
1318 goto fail;
1321 /* Find the right image format driver */
1322 drvname = qdict_get_try_str(options, "driver");
1323 if (drvname) {
1324 drv = bdrv_find_format(drvname);
1325 qdict_del(options, "driver");
1326 if (!drv) {
1327 error_setg(errp, "Invalid driver: '%s'", drvname);
1328 ret = -EINVAL;
1329 goto unlink_and_fail;
1333 if (!drv) {
1334 if (file) {
1335 ret = find_image_format(file, filename, &drv, &local_err);
1336 } else {
1337 error_setg(errp, "Must specify either driver or file");
1338 ret = -EINVAL;
1339 goto unlink_and_fail;
1343 if (!drv) {
1344 goto unlink_and_fail;
1347 /* Open the image */
1348 ret = bdrv_open_common(bs, file, options, flags, drv, &local_err);
1349 if (ret < 0) {
1350 goto unlink_and_fail;
1353 if (file && (bs->file != file)) {
1354 bdrv_unref(file);
1355 file = NULL;
1358 /* If there is a backing file, use it */
1359 if ((flags & BDRV_O_NO_BACKING) == 0) {
1360 QDict *backing_options;
1362 qdict_extract_subqdict(options, &backing_options, "backing.");
1363 ret = bdrv_open_backing_file(bs, backing_options, &local_err);
1364 if (ret < 0) {
1365 goto close_and_fail;
1369 done:
1370 /* Check if any unknown options were used */
1371 if (options && (qdict_size(options) != 0)) {
1372 const QDictEntry *entry = qdict_first(options);
1373 if (flags & BDRV_O_PROTOCOL) {
1374 error_setg(errp, "Block protocol '%s' doesn't support the option "
1375 "'%s'", drv->format_name, entry->key);
1376 } else {
1377 error_setg(errp, "Block format '%s' used by device '%s' doesn't "
1378 "support the option '%s'", drv->format_name,
1379 bs->device_name, entry->key);
1382 ret = -EINVAL;
1383 goto close_and_fail;
1385 QDECREF(options);
1387 if (!bdrv_key_required(bs)) {
1388 bdrv_dev_change_media_cb(bs, true);
1391 *pbs = bs;
1392 return 0;
1394 unlink_and_fail:
1395 if (file != NULL) {
1396 bdrv_unref(file);
1398 if (bs->is_temporary) {
1399 unlink(filename);
1401 fail:
1402 QDECREF(bs->options);
1403 QDECREF(options);
1404 bs->options = NULL;
1405 if (!*pbs) {
1406 /* If *pbs is NULL, a new BDS has been created in this function and
1407 needs to be freed now. Otherwise, it does not need to be closed,
1408 since it has not really been opened yet. */
1409 bdrv_unref(bs);
1411 if (local_err) {
1412 error_propagate(errp, local_err);
1414 return ret;
1416 close_and_fail:
1417 /* See fail path, but now the BDS has to be always closed */
1418 if (*pbs) {
1419 bdrv_close(bs);
1420 } else {
1421 bdrv_unref(bs);
1423 QDECREF(options);
1424 if (local_err) {
1425 error_propagate(errp, local_err);
1427 return ret;
1430 typedef struct BlockReopenQueueEntry {
1431 bool prepared;
1432 BDRVReopenState state;
1433 QSIMPLEQ_ENTRY(BlockReopenQueueEntry) entry;
1434 } BlockReopenQueueEntry;
1437 * Adds a BlockDriverState to a simple queue for an atomic, transactional
1438 * reopen of multiple devices.
1440 * bs_queue can either be an existing BlockReopenQueue that has had QSIMPLE_INIT
1441 * already performed, or alternatively may be NULL a new BlockReopenQueue will
1442 * be created and initialized. This newly created BlockReopenQueue should be
1443 * passed back in for subsequent calls that are intended to be of the same
1444 * atomic 'set'.
1446 * bs is the BlockDriverState to add to the reopen queue.
1448 * flags contains the open flags for the associated bs
1450 * returns a pointer to bs_queue, which is either the newly allocated
1451 * bs_queue, or the existing bs_queue being used.
1454 BlockReopenQueue *bdrv_reopen_queue(BlockReopenQueue *bs_queue,
1455 BlockDriverState *bs, int flags)
1457 assert(bs != NULL);
1459 BlockReopenQueueEntry *bs_entry;
1460 if (bs_queue == NULL) {
1461 bs_queue = g_new0(BlockReopenQueue, 1);
1462 QSIMPLEQ_INIT(bs_queue);
1465 if (bs->file) {
1466 bdrv_reopen_queue(bs_queue, bs->file, flags);
1469 bs_entry = g_new0(BlockReopenQueueEntry, 1);
1470 QSIMPLEQ_INSERT_TAIL(bs_queue, bs_entry, entry);
1472 bs_entry->state.bs = bs;
1473 bs_entry->state.flags = flags;
1475 return bs_queue;
1479 * Reopen multiple BlockDriverStates atomically & transactionally.
1481 * The queue passed in (bs_queue) must have been built up previous
1482 * via bdrv_reopen_queue().
1484 * Reopens all BDS specified in the queue, with the appropriate
1485 * flags. All devices are prepared for reopen, and failure of any
1486 * device will cause all device changes to be abandonded, and intermediate
1487 * data cleaned up.
1489 * If all devices prepare successfully, then the changes are committed
1490 * to all devices.
1493 int bdrv_reopen_multiple(BlockReopenQueue *bs_queue, Error **errp)
1495 int ret = -1;
1496 BlockReopenQueueEntry *bs_entry, *next;
1497 Error *local_err = NULL;
1499 assert(bs_queue != NULL);
1501 bdrv_drain_all();
1503 QSIMPLEQ_FOREACH(bs_entry, bs_queue, entry) {
1504 if (bdrv_reopen_prepare(&bs_entry->state, bs_queue, &local_err)) {
1505 error_propagate(errp, local_err);
1506 goto cleanup;
1508 bs_entry->prepared = true;
1511 /* If we reach this point, we have success and just need to apply the
1512 * changes
1514 QSIMPLEQ_FOREACH(bs_entry, bs_queue, entry) {
1515 bdrv_reopen_commit(&bs_entry->state);
1518 ret = 0;
1520 cleanup:
1521 QSIMPLEQ_FOREACH_SAFE(bs_entry, bs_queue, entry, next) {
1522 if (ret && bs_entry->prepared) {
1523 bdrv_reopen_abort(&bs_entry->state);
1525 g_free(bs_entry);
1527 g_free(bs_queue);
1528 return ret;
1532 /* Reopen a single BlockDriverState with the specified flags. */
1533 int bdrv_reopen(BlockDriverState *bs, int bdrv_flags, Error **errp)
1535 int ret = -1;
1536 Error *local_err = NULL;
1537 BlockReopenQueue *queue = bdrv_reopen_queue(NULL, bs, bdrv_flags);
1539 ret = bdrv_reopen_multiple(queue, &local_err);
1540 if (local_err != NULL) {
1541 error_propagate(errp, local_err);
1543 return ret;
1548 * Prepares a BlockDriverState for reopen. All changes are staged in the
1549 * 'opaque' field of the BDRVReopenState, which is used and allocated by
1550 * the block driver layer .bdrv_reopen_prepare()
1552 * bs is the BlockDriverState to reopen
1553 * flags are the new open flags
1554 * queue is the reopen queue
1556 * Returns 0 on success, non-zero on error. On error errp will be set
1557 * as well.
1559 * On failure, bdrv_reopen_abort() will be called to clean up any data.
1560 * It is the responsibility of the caller to then call the abort() or
1561 * commit() for any other BDS that have been left in a prepare() state
1564 int bdrv_reopen_prepare(BDRVReopenState *reopen_state, BlockReopenQueue *queue,
1565 Error **errp)
1567 int ret = -1;
1568 Error *local_err = NULL;
1569 BlockDriver *drv;
1571 assert(reopen_state != NULL);
1572 assert(reopen_state->bs->drv != NULL);
1573 drv = reopen_state->bs->drv;
1575 /* if we are to stay read-only, do not allow permission change
1576 * to r/w */
1577 if (!(reopen_state->bs->open_flags & BDRV_O_ALLOW_RDWR) &&
1578 reopen_state->flags & BDRV_O_RDWR) {
1579 error_set(errp, QERR_DEVICE_IS_READ_ONLY,
1580 reopen_state->bs->device_name);
1581 goto error;
1585 ret = bdrv_flush(reopen_state->bs);
1586 if (ret) {
1587 error_set(errp, ERROR_CLASS_GENERIC_ERROR, "Error (%s) flushing drive",
1588 strerror(-ret));
1589 goto error;
1592 if (drv->bdrv_reopen_prepare) {
1593 ret = drv->bdrv_reopen_prepare(reopen_state, queue, &local_err);
1594 if (ret) {
1595 if (local_err != NULL) {
1596 error_propagate(errp, local_err);
1597 } else {
1598 error_setg(errp, "failed while preparing to reopen image '%s'",
1599 reopen_state->bs->filename);
1601 goto error;
1603 } else {
1604 /* It is currently mandatory to have a bdrv_reopen_prepare()
1605 * handler for each supported drv. */
1606 error_set(errp, QERR_BLOCK_FORMAT_FEATURE_NOT_SUPPORTED,
1607 drv->format_name, reopen_state->bs->device_name,
1608 "reopening of file");
1609 ret = -1;
1610 goto error;
1613 ret = 0;
1615 error:
1616 return ret;
1620 * Takes the staged changes for the reopen from bdrv_reopen_prepare(), and
1621 * makes them final by swapping the staging BlockDriverState contents into
1622 * the active BlockDriverState contents.
1624 void bdrv_reopen_commit(BDRVReopenState *reopen_state)
1626 BlockDriver *drv;
1628 assert(reopen_state != NULL);
1629 drv = reopen_state->bs->drv;
1630 assert(drv != NULL);
1632 /* If there are any driver level actions to take */
1633 if (drv->bdrv_reopen_commit) {
1634 drv->bdrv_reopen_commit(reopen_state);
1637 /* set BDS specific flags now */
1638 reopen_state->bs->open_flags = reopen_state->flags;
1639 reopen_state->bs->enable_write_cache = !!(reopen_state->flags &
1640 BDRV_O_CACHE_WB);
1641 reopen_state->bs->read_only = !(reopen_state->flags & BDRV_O_RDWR);
1643 bdrv_refresh_limits(reopen_state->bs);
1647 * Abort the reopen, and delete and free the staged changes in
1648 * reopen_state
1650 void bdrv_reopen_abort(BDRVReopenState *reopen_state)
1652 BlockDriver *drv;
1654 assert(reopen_state != NULL);
1655 drv = reopen_state->bs->drv;
1656 assert(drv != NULL);
1658 if (drv->bdrv_reopen_abort) {
1659 drv->bdrv_reopen_abort(reopen_state);
1664 void bdrv_close(BlockDriverState *bs)
1666 if (bs->job) {
1667 block_job_cancel_sync(bs->job);
1669 bdrv_drain_all(); /* complete I/O */
1670 bdrv_flush(bs);
1671 bdrv_drain_all(); /* in case flush left pending I/O */
1672 notifier_list_notify(&bs->close_notifiers, bs);
1674 if (bs->drv) {
1675 if (bs->backing_hd) {
1676 bdrv_unref(bs->backing_hd);
1677 bs->backing_hd = NULL;
1679 bs->drv->bdrv_close(bs);
1680 g_free(bs->opaque);
1681 #ifdef _WIN32
1682 if (bs->is_temporary) {
1683 unlink(bs->filename);
1685 #endif
1686 bs->opaque = NULL;
1687 bs->drv = NULL;
1688 bs->copy_on_read = 0;
1689 bs->backing_file[0] = '\0';
1690 bs->backing_format[0] = '\0';
1691 bs->total_sectors = 0;
1692 bs->encrypted = 0;
1693 bs->valid_key = 0;
1694 bs->sg = 0;
1695 bs->growable = 0;
1696 bs->zero_beyond_eof = false;
1697 QDECREF(bs->options);
1698 bs->options = NULL;
1700 if (bs->file != NULL) {
1701 bdrv_unref(bs->file);
1702 bs->file = NULL;
1706 bdrv_dev_change_media_cb(bs, false);
1708 /*throttling disk I/O limits*/
1709 if (bs->io_limits_enabled) {
1710 bdrv_io_limits_disable(bs);
1714 void bdrv_close_all(void)
1716 BlockDriverState *bs;
1718 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
1719 bdrv_close(bs);
1723 /* Check if any requests are in-flight (including throttled requests) */
1724 static bool bdrv_requests_pending(BlockDriverState *bs)
1726 if (!QLIST_EMPTY(&bs->tracked_requests)) {
1727 return true;
1729 if (!qemu_co_queue_empty(&bs->throttled_reqs[0])) {
1730 return true;
1732 if (!qemu_co_queue_empty(&bs->throttled_reqs[1])) {
1733 return true;
1735 if (bs->file && bdrv_requests_pending(bs->file)) {
1736 return true;
1738 if (bs->backing_hd && bdrv_requests_pending(bs->backing_hd)) {
1739 return true;
1741 return false;
1744 static bool bdrv_requests_pending_all(void)
1746 BlockDriverState *bs;
1747 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
1748 if (bdrv_requests_pending(bs)) {
1749 return true;
1752 return false;
1756 * Wait for pending requests to complete across all BlockDriverStates
1758 * This function does not flush data to disk, use bdrv_flush_all() for that
1759 * after calling this function.
1761 * Note that completion of an asynchronous I/O operation can trigger any
1762 * number of other I/O operations on other devices---for example a coroutine
1763 * can be arbitrarily complex and a constant flow of I/O can come until the
1764 * coroutine is complete. Because of this, it is not possible to have a
1765 * function to drain a single device's I/O queue.
1767 void bdrv_drain_all(void)
1769 /* Always run first iteration so any pending completion BHs run */
1770 bool busy = true;
1771 BlockDriverState *bs;
1773 while (busy) {
1774 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
1775 bdrv_start_throttled_reqs(bs);
1778 busy = bdrv_requests_pending_all();
1779 busy |= aio_poll(qemu_get_aio_context(), busy);
1783 /* make a BlockDriverState anonymous by removing from bdrv_state and
1784 * graph_bdrv_state list.
1785 Also, NULL terminate the device_name to prevent double remove */
1786 void bdrv_make_anon(BlockDriverState *bs)
1788 if (bs->device_name[0] != '\0') {
1789 QTAILQ_REMOVE(&bdrv_states, bs, device_list);
1791 bs->device_name[0] = '\0';
1792 if (bs->node_name[0] != '\0') {
1793 QTAILQ_REMOVE(&graph_bdrv_states, bs, node_list);
1795 bs->node_name[0] = '\0';
1798 static void bdrv_rebind(BlockDriverState *bs)
1800 if (bs->drv && bs->drv->bdrv_rebind) {
1801 bs->drv->bdrv_rebind(bs);
1805 static void bdrv_move_feature_fields(BlockDriverState *bs_dest,
1806 BlockDriverState *bs_src)
1808 /* move some fields that need to stay attached to the device */
1809 bs_dest->open_flags = bs_src->open_flags;
1811 /* dev info */
1812 bs_dest->dev_ops = bs_src->dev_ops;
1813 bs_dest->dev_opaque = bs_src->dev_opaque;
1814 bs_dest->dev = bs_src->dev;
1815 bs_dest->guest_block_size = bs_src->guest_block_size;
1816 bs_dest->copy_on_read = bs_src->copy_on_read;
1818 bs_dest->enable_write_cache = bs_src->enable_write_cache;
1820 /* i/o throttled req */
1821 memcpy(&bs_dest->throttle_state,
1822 &bs_src->throttle_state,
1823 sizeof(ThrottleState));
1824 bs_dest->throttled_reqs[0] = bs_src->throttled_reqs[0];
1825 bs_dest->throttled_reqs[1] = bs_src->throttled_reqs[1];
1826 bs_dest->io_limits_enabled = bs_src->io_limits_enabled;
1828 /* r/w error */
1829 bs_dest->on_read_error = bs_src->on_read_error;
1830 bs_dest->on_write_error = bs_src->on_write_error;
1832 /* i/o status */
1833 bs_dest->iostatus_enabled = bs_src->iostatus_enabled;
1834 bs_dest->iostatus = bs_src->iostatus;
1836 /* dirty bitmap */
1837 bs_dest->dirty_bitmaps = bs_src->dirty_bitmaps;
1839 /* reference count */
1840 bs_dest->refcnt = bs_src->refcnt;
1842 /* job */
1843 bs_dest->in_use = bs_src->in_use;
1844 bs_dest->job = bs_src->job;
1846 /* keep the same entry in bdrv_states */
1847 pstrcpy(bs_dest->device_name, sizeof(bs_dest->device_name),
1848 bs_src->device_name);
1849 bs_dest->device_list = bs_src->device_list;
1851 /* keep the same entry in graph_bdrv_states
1852 * We do want to swap name but don't want to swap linked list entries
1854 bs_dest->node_list = bs_src->node_list;
1858 * Swap bs contents for two image chains while they are live,
1859 * while keeping required fields on the BlockDriverState that is
1860 * actually attached to a device.
1862 * This will modify the BlockDriverState fields, and swap contents
1863 * between bs_new and bs_old. Both bs_new and bs_old are modified.
1865 * bs_new is required to be anonymous.
1867 * This function does not create any image files.
1869 void bdrv_swap(BlockDriverState *bs_new, BlockDriverState *bs_old)
1871 BlockDriverState tmp;
1873 /* bs_new must be anonymous and shouldn't have anything fancy enabled */
1874 assert(bs_new->device_name[0] == '\0');
1875 assert(QLIST_EMPTY(&bs_new->dirty_bitmaps));
1876 assert(bs_new->job == NULL);
1877 assert(bs_new->dev == NULL);
1878 assert(bs_new->in_use == 0);
1879 assert(bs_new->io_limits_enabled == false);
1880 assert(!throttle_have_timer(&bs_new->throttle_state));
1882 tmp = *bs_new;
1883 *bs_new = *bs_old;
1884 *bs_old = tmp;
1886 /* there are some fields that should not be swapped, move them back */
1887 bdrv_move_feature_fields(&tmp, bs_old);
1888 bdrv_move_feature_fields(bs_old, bs_new);
1889 bdrv_move_feature_fields(bs_new, &tmp);
1891 /* bs_new shouldn't be in bdrv_states even after the swap! */
1892 assert(bs_new->device_name[0] == '\0');
1894 /* Check a few fields that should remain attached to the device */
1895 assert(bs_new->dev == NULL);
1896 assert(bs_new->job == NULL);
1897 assert(bs_new->in_use == 0);
1898 assert(bs_new->io_limits_enabled == false);
1899 assert(!throttle_have_timer(&bs_new->throttle_state));
1901 bdrv_rebind(bs_new);
1902 bdrv_rebind(bs_old);
1906 * Add new bs contents at the top of an image chain while the chain is
1907 * live, while keeping required fields on the top layer.
1909 * This will modify the BlockDriverState fields, and swap contents
1910 * between bs_new and bs_top. Both bs_new and bs_top are modified.
1912 * bs_new is required to be anonymous.
1914 * This function does not create any image files.
1916 void bdrv_append(BlockDriverState *bs_new, BlockDriverState *bs_top)
1918 bdrv_swap(bs_new, bs_top);
1920 /* The contents of 'tmp' will become bs_top, as we are
1921 * swapping bs_new and bs_top contents. */
1922 bs_top->backing_hd = bs_new;
1923 bs_top->open_flags &= ~BDRV_O_NO_BACKING;
1924 pstrcpy(bs_top->backing_file, sizeof(bs_top->backing_file),
1925 bs_new->filename);
1926 pstrcpy(bs_top->backing_format, sizeof(bs_top->backing_format),
1927 bs_new->drv ? bs_new->drv->format_name : "");
1930 static void bdrv_delete(BlockDriverState *bs)
1932 assert(!bs->dev);
1933 assert(!bs->job);
1934 assert(!bs->in_use);
1935 assert(!bs->refcnt);
1936 assert(QLIST_EMPTY(&bs->dirty_bitmaps));
1938 bdrv_close(bs);
1940 /* remove from list, if necessary */
1941 bdrv_make_anon(bs);
1943 g_free(bs);
1946 int bdrv_attach_dev(BlockDriverState *bs, void *dev)
1947 /* TODO change to DeviceState *dev when all users are qdevified */
1949 if (bs->dev) {
1950 return -EBUSY;
1952 bs->dev = dev;
1953 bdrv_iostatus_reset(bs);
1954 return 0;
1957 /* TODO qdevified devices don't use this, remove when devices are qdevified */
1958 void bdrv_attach_dev_nofail(BlockDriverState *bs, void *dev)
1960 if (bdrv_attach_dev(bs, dev) < 0) {
1961 abort();
1965 void bdrv_detach_dev(BlockDriverState *bs, void *dev)
1966 /* TODO change to DeviceState *dev when all users are qdevified */
1968 assert(bs->dev == dev);
1969 bs->dev = NULL;
1970 bs->dev_ops = NULL;
1971 bs->dev_opaque = NULL;
1972 bs->guest_block_size = 512;
1975 /* TODO change to return DeviceState * when all users are qdevified */
1976 void *bdrv_get_attached_dev(BlockDriverState *bs)
1978 return bs->dev;
1981 void bdrv_set_dev_ops(BlockDriverState *bs, const BlockDevOps *ops,
1982 void *opaque)
1984 bs->dev_ops = ops;
1985 bs->dev_opaque = opaque;
1988 void bdrv_emit_qmp_error_event(const BlockDriverState *bdrv,
1989 enum MonitorEvent ev,
1990 BlockErrorAction action, bool is_read)
1992 QObject *data;
1993 const char *action_str;
1995 switch (action) {
1996 case BDRV_ACTION_REPORT:
1997 action_str = "report";
1998 break;
1999 case BDRV_ACTION_IGNORE:
2000 action_str = "ignore";
2001 break;
2002 case BDRV_ACTION_STOP:
2003 action_str = "stop";
2004 break;
2005 default:
2006 abort();
2009 data = qobject_from_jsonf("{ 'device': %s, 'action': %s, 'operation': %s }",
2010 bdrv->device_name,
2011 action_str,
2012 is_read ? "read" : "write");
2013 monitor_protocol_event(ev, data);
2015 qobject_decref(data);
2018 static void bdrv_emit_qmp_eject_event(BlockDriverState *bs, bool ejected)
2020 QObject *data;
2022 data = qobject_from_jsonf("{ 'device': %s, 'tray-open': %i }",
2023 bdrv_get_device_name(bs), ejected);
2024 monitor_protocol_event(QEVENT_DEVICE_TRAY_MOVED, data);
2026 qobject_decref(data);
2029 static void bdrv_dev_change_media_cb(BlockDriverState *bs, bool load)
2031 if (bs->dev_ops && bs->dev_ops->change_media_cb) {
2032 bool tray_was_closed = !bdrv_dev_is_tray_open(bs);
2033 bs->dev_ops->change_media_cb(bs->dev_opaque, load);
2034 if (tray_was_closed) {
2035 /* tray open */
2036 bdrv_emit_qmp_eject_event(bs, true);
2038 if (load) {
2039 /* tray close */
2040 bdrv_emit_qmp_eject_event(bs, false);
2045 bool bdrv_dev_has_removable_media(BlockDriverState *bs)
2047 return !bs->dev || (bs->dev_ops && bs->dev_ops->change_media_cb);
2050 void bdrv_dev_eject_request(BlockDriverState *bs, bool force)
2052 if (bs->dev_ops && bs->dev_ops->eject_request_cb) {
2053 bs->dev_ops->eject_request_cb(bs->dev_opaque, force);
2057 bool bdrv_dev_is_tray_open(BlockDriverState *bs)
2059 if (bs->dev_ops && bs->dev_ops->is_tray_open) {
2060 return bs->dev_ops->is_tray_open(bs->dev_opaque);
2062 return false;
2065 static void bdrv_dev_resize_cb(BlockDriverState *bs)
2067 if (bs->dev_ops && bs->dev_ops->resize_cb) {
2068 bs->dev_ops->resize_cb(bs->dev_opaque);
2072 bool bdrv_dev_is_medium_locked(BlockDriverState *bs)
2074 if (bs->dev_ops && bs->dev_ops->is_medium_locked) {
2075 return bs->dev_ops->is_medium_locked(bs->dev_opaque);
2077 return false;
2081 * Run consistency checks on an image
2083 * Returns 0 if the check could be completed (it doesn't mean that the image is
2084 * free of errors) or -errno when an internal error occurred. The results of the
2085 * check are stored in res.
2087 int bdrv_check(BlockDriverState *bs, BdrvCheckResult *res, BdrvCheckMode fix)
2089 if (bs->drv->bdrv_check == NULL) {
2090 return -ENOTSUP;
2093 memset(res, 0, sizeof(*res));
2094 return bs->drv->bdrv_check(bs, res, fix);
2097 #define COMMIT_BUF_SECTORS 2048
2099 /* commit COW file into the raw image */
2100 int bdrv_commit(BlockDriverState *bs)
2102 BlockDriver *drv = bs->drv;
2103 int64_t sector, total_sectors, length, backing_length;
2104 int n, ro, open_flags;
2105 int ret = 0;
2106 uint8_t *buf = NULL;
2107 char filename[PATH_MAX];
2109 if (!drv)
2110 return -ENOMEDIUM;
2112 if (!bs->backing_hd) {
2113 return -ENOTSUP;
2116 if (bdrv_in_use(bs) || bdrv_in_use(bs->backing_hd)) {
2117 return -EBUSY;
2120 ro = bs->backing_hd->read_only;
2121 /* Use pstrcpy (not strncpy): filename must be NUL-terminated. */
2122 pstrcpy(filename, sizeof(filename), bs->backing_hd->filename);
2123 open_flags = bs->backing_hd->open_flags;
2125 if (ro) {
2126 if (bdrv_reopen(bs->backing_hd, open_flags | BDRV_O_RDWR, NULL)) {
2127 return -EACCES;
2131 length = bdrv_getlength(bs);
2132 if (length < 0) {
2133 ret = length;
2134 goto ro_cleanup;
2137 backing_length = bdrv_getlength(bs->backing_hd);
2138 if (backing_length < 0) {
2139 ret = backing_length;
2140 goto ro_cleanup;
2143 /* If our top snapshot is larger than the backing file image,
2144 * grow the backing file image if possible. If not possible,
2145 * we must return an error */
2146 if (length > backing_length) {
2147 ret = bdrv_truncate(bs->backing_hd, length);
2148 if (ret < 0) {
2149 goto ro_cleanup;
2153 total_sectors = length >> BDRV_SECTOR_BITS;
2154 buf = g_malloc(COMMIT_BUF_SECTORS * BDRV_SECTOR_SIZE);
2156 for (sector = 0; sector < total_sectors; sector += n) {
2157 ret = bdrv_is_allocated(bs, sector, COMMIT_BUF_SECTORS, &n);
2158 if (ret < 0) {
2159 goto ro_cleanup;
2161 if (ret) {
2162 ret = bdrv_read(bs, sector, buf, n);
2163 if (ret < 0) {
2164 goto ro_cleanup;
2167 ret = bdrv_write(bs->backing_hd, sector, buf, n);
2168 if (ret < 0) {
2169 goto ro_cleanup;
2174 if (drv->bdrv_make_empty) {
2175 ret = drv->bdrv_make_empty(bs);
2176 if (ret < 0) {
2177 goto ro_cleanup;
2179 bdrv_flush(bs);
2183 * Make sure all data we wrote to the backing device is actually
2184 * stable on disk.
2186 if (bs->backing_hd) {
2187 bdrv_flush(bs->backing_hd);
2190 ret = 0;
2191 ro_cleanup:
2192 g_free(buf);
2194 if (ro) {
2195 /* ignoring error return here */
2196 bdrv_reopen(bs->backing_hd, open_flags & ~BDRV_O_RDWR, NULL);
2199 return ret;
2202 int bdrv_commit_all(void)
2204 BlockDriverState *bs;
2206 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
2207 if (bs->drv && bs->backing_hd) {
2208 int ret = bdrv_commit(bs);
2209 if (ret < 0) {
2210 return ret;
2214 return 0;
2218 * Remove an active request from the tracked requests list
2220 * This function should be called when a tracked request is completing.
2222 static void tracked_request_end(BdrvTrackedRequest *req)
2224 if (req->serialising) {
2225 req->bs->serialising_in_flight--;
2228 QLIST_REMOVE(req, list);
2229 qemu_co_queue_restart_all(&req->wait_queue);
2233 * Add an active request to the tracked requests list
2235 static void tracked_request_begin(BdrvTrackedRequest *req,
2236 BlockDriverState *bs,
2237 int64_t offset,
2238 unsigned int bytes, bool is_write)
2240 *req = (BdrvTrackedRequest){
2241 .bs = bs,
2242 .offset = offset,
2243 .bytes = bytes,
2244 .is_write = is_write,
2245 .co = qemu_coroutine_self(),
2246 .serialising = false,
2247 .overlap_offset = offset,
2248 .overlap_bytes = bytes,
2251 qemu_co_queue_init(&req->wait_queue);
2253 QLIST_INSERT_HEAD(&bs->tracked_requests, req, list);
2256 static void mark_request_serialising(BdrvTrackedRequest *req, uint64_t align)
2258 int64_t overlap_offset = req->offset & ~(align - 1);
2259 unsigned int overlap_bytes = ROUND_UP(req->offset + req->bytes, align)
2260 - overlap_offset;
2262 if (!req->serialising) {
2263 req->bs->serialising_in_flight++;
2264 req->serialising = true;
2267 req->overlap_offset = MIN(req->overlap_offset, overlap_offset);
2268 req->overlap_bytes = MAX(req->overlap_bytes, overlap_bytes);
2272 * Round a region to cluster boundaries
2274 void bdrv_round_to_clusters(BlockDriverState *bs,
2275 int64_t sector_num, int nb_sectors,
2276 int64_t *cluster_sector_num,
2277 int *cluster_nb_sectors)
2279 BlockDriverInfo bdi;
2281 if (bdrv_get_info(bs, &bdi) < 0 || bdi.cluster_size == 0) {
2282 *cluster_sector_num = sector_num;
2283 *cluster_nb_sectors = nb_sectors;
2284 } else {
2285 int64_t c = bdi.cluster_size / BDRV_SECTOR_SIZE;
2286 *cluster_sector_num = QEMU_ALIGN_DOWN(sector_num, c);
2287 *cluster_nb_sectors = QEMU_ALIGN_UP(sector_num - *cluster_sector_num +
2288 nb_sectors, c);
2292 static int bdrv_get_cluster_size(BlockDriverState *bs)
2294 BlockDriverInfo bdi;
2295 int ret;
2297 ret = bdrv_get_info(bs, &bdi);
2298 if (ret < 0 || bdi.cluster_size == 0) {
2299 return bs->request_alignment;
2300 } else {
2301 return bdi.cluster_size;
2305 static bool tracked_request_overlaps(BdrvTrackedRequest *req,
2306 int64_t offset, unsigned int bytes)
2308 /* aaaa bbbb */
2309 if (offset >= req->overlap_offset + req->overlap_bytes) {
2310 return false;
2312 /* bbbb aaaa */
2313 if (req->overlap_offset >= offset + bytes) {
2314 return false;
2316 return true;
2319 static bool coroutine_fn wait_serialising_requests(BdrvTrackedRequest *self)
2321 BlockDriverState *bs = self->bs;
2322 BdrvTrackedRequest *req;
2323 bool retry;
2324 bool waited = false;
2326 if (!bs->serialising_in_flight) {
2327 return false;
2330 do {
2331 retry = false;
2332 QLIST_FOREACH(req, &bs->tracked_requests, list) {
2333 if (req == self || (!req->serialising && !self->serialising)) {
2334 continue;
2336 if (tracked_request_overlaps(req, self->overlap_offset,
2337 self->overlap_bytes))
2339 /* Hitting this means there was a reentrant request, for
2340 * example, a block driver issuing nested requests. This must
2341 * never happen since it means deadlock.
2343 assert(qemu_coroutine_self() != req->co);
2345 /* If the request is already (indirectly) waiting for us, or
2346 * will wait for us as soon as it wakes up, then just go on
2347 * (instead of producing a deadlock in the former case). */
2348 if (!req->waiting_for) {
2349 self->waiting_for = req;
2350 qemu_co_queue_wait(&req->wait_queue);
2351 self->waiting_for = NULL;
2352 retry = true;
2353 waited = true;
2354 break;
2358 } while (retry);
2360 return waited;
2364 * Return values:
2365 * 0 - success
2366 * -EINVAL - backing format specified, but no file
2367 * -ENOSPC - can't update the backing file because no space is left in the
2368 * image file header
2369 * -ENOTSUP - format driver doesn't support changing the backing file
2371 int bdrv_change_backing_file(BlockDriverState *bs,
2372 const char *backing_file, const char *backing_fmt)
2374 BlockDriver *drv = bs->drv;
2375 int ret;
2377 /* Backing file format doesn't make sense without a backing file */
2378 if (backing_fmt && !backing_file) {
2379 return -EINVAL;
2382 if (drv->bdrv_change_backing_file != NULL) {
2383 ret = drv->bdrv_change_backing_file(bs, backing_file, backing_fmt);
2384 } else {
2385 ret = -ENOTSUP;
2388 if (ret == 0) {
2389 pstrcpy(bs->backing_file, sizeof(bs->backing_file), backing_file ?: "");
2390 pstrcpy(bs->backing_format, sizeof(bs->backing_format), backing_fmt ?: "");
2392 return ret;
2396 * Finds the image layer in the chain that has 'bs' as its backing file.
2398 * active is the current topmost image.
2400 * Returns NULL if bs is not found in active's image chain,
2401 * or if active == bs.
2403 BlockDriverState *bdrv_find_overlay(BlockDriverState *active,
2404 BlockDriverState *bs)
2406 BlockDriverState *overlay = NULL;
2407 BlockDriverState *intermediate;
2409 assert(active != NULL);
2410 assert(bs != NULL);
2412 /* if bs is the same as active, then by definition it has no overlay
2414 if (active == bs) {
2415 return NULL;
2418 intermediate = active;
2419 while (intermediate->backing_hd) {
2420 if (intermediate->backing_hd == bs) {
2421 overlay = intermediate;
2422 break;
2424 intermediate = intermediate->backing_hd;
2427 return overlay;
2430 typedef struct BlkIntermediateStates {
2431 BlockDriverState *bs;
2432 QSIMPLEQ_ENTRY(BlkIntermediateStates) entry;
2433 } BlkIntermediateStates;
2437 * Drops images above 'base' up to and including 'top', and sets the image
2438 * above 'top' to have base as its backing file.
2440 * Requires that the overlay to 'top' is opened r/w, so that the backing file
2441 * information in 'bs' can be properly updated.
2443 * E.g., this will convert the following chain:
2444 * bottom <- base <- intermediate <- top <- active
2446 * to
2448 * bottom <- base <- active
2450 * It is allowed for bottom==base, in which case it converts:
2452 * base <- intermediate <- top <- active
2454 * to
2456 * base <- active
2458 * Error conditions:
2459 * if active == top, that is considered an error
2462 int bdrv_drop_intermediate(BlockDriverState *active, BlockDriverState *top,
2463 BlockDriverState *base)
2465 BlockDriverState *intermediate;
2466 BlockDriverState *base_bs = NULL;
2467 BlockDriverState *new_top_bs = NULL;
2468 BlkIntermediateStates *intermediate_state, *next;
2469 int ret = -EIO;
2471 QSIMPLEQ_HEAD(states_to_delete, BlkIntermediateStates) states_to_delete;
2472 QSIMPLEQ_INIT(&states_to_delete);
2474 if (!top->drv || !base->drv) {
2475 goto exit;
2478 new_top_bs = bdrv_find_overlay(active, top);
2480 if (new_top_bs == NULL) {
2481 /* we could not find the image above 'top', this is an error */
2482 goto exit;
2485 /* special case of new_top_bs->backing_hd already pointing to base - nothing
2486 * to do, no intermediate images */
2487 if (new_top_bs->backing_hd == base) {
2488 ret = 0;
2489 goto exit;
2492 intermediate = top;
2494 /* now we will go down through the list, and add each BDS we find
2495 * into our deletion queue, until we hit the 'base'
2497 while (intermediate) {
2498 intermediate_state = g_malloc0(sizeof(BlkIntermediateStates));
2499 intermediate_state->bs = intermediate;
2500 QSIMPLEQ_INSERT_TAIL(&states_to_delete, intermediate_state, entry);
2502 if (intermediate->backing_hd == base) {
2503 base_bs = intermediate->backing_hd;
2504 break;
2506 intermediate = intermediate->backing_hd;
2508 if (base_bs == NULL) {
2509 /* something went wrong, we did not end at the base. safely
2510 * unravel everything, and exit with error */
2511 goto exit;
2514 /* success - we can delete the intermediate states, and link top->base */
2515 ret = bdrv_change_backing_file(new_top_bs, base_bs->filename,
2516 base_bs->drv ? base_bs->drv->format_name : "");
2517 if (ret) {
2518 goto exit;
2520 new_top_bs->backing_hd = base_bs;
2522 bdrv_refresh_limits(new_top_bs);
2524 QSIMPLEQ_FOREACH_SAFE(intermediate_state, &states_to_delete, entry, next) {
2525 /* so that bdrv_close() does not recursively close the chain */
2526 intermediate_state->bs->backing_hd = NULL;
2527 bdrv_unref(intermediate_state->bs);
2529 ret = 0;
2531 exit:
2532 QSIMPLEQ_FOREACH_SAFE(intermediate_state, &states_to_delete, entry, next) {
2533 g_free(intermediate_state);
2535 return ret;
2539 static int bdrv_check_byte_request(BlockDriverState *bs, int64_t offset,
2540 size_t size)
2542 int64_t len;
2544 if (!bdrv_is_inserted(bs))
2545 return -ENOMEDIUM;
2547 if (bs->growable)
2548 return 0;
2550 len = bdrv_getlength(bs);
2552 if (offset < 0)
2553 return -EIO;
2555 if ((offset > len) || (len - offset < size))
2556 return -EIO;
2558 return 0;
2561 static int bdrv_check_request(BlockDriverState *bs, int64_t sector_num,
2562 int nb_sectors)
2564 return bdrv_check_byte_request(bs, sector_num * BDRV_SECTOR_SIZE,
2565 nb_sectors * BDRV_SECTOR_SIZE);
2568 typedef struct RwCo {
2569 BlockDriverState *bs;
2570 int64_t offset;
2571 QEMUIOVector *qiov;
2572 bool is_write;
2573 int ret;
2574 BdrvRequestFlags flags;
2575 } RwCo;
2577 static void coroutine_fn bdrv_rw_co_entry(void *opaque)
2579 RwCo *rwco = opaque;
2581 if (!rwco->is_write) {
2582 rwco->ret = bdrv_co_do_preadv(rwco->bs, rwco->offset,
2583 rwco->qiov->size, rwco->qiov,
2584 rwco->flags);
2585 } else {
2586 rwco->ret = bdrv_co_do_pwritev(rwco->bs, rwco->offset,
2587 rwco->qiov->size, rwco->qiov,
2588 rwco->flags);
2593 * Process a vectored synchronous request using coroutines
2595 static int bdrv_prwv_co(BlockDriverState *bs, int64_t offset,
2596 QEMUIOVector *qiov, bool is_write,
2597 BdrvRequestFlags flags)
2599 Coroutine *co;
2600 RwCo rwco = {
2601 .bs = bs,
2602 .offset = offset,
2603 .qiov = qiov,
2604 .is_write = is_write,
2605 .ret = NOT_DONE,
2606 .flags = flags,
2610 * In sync call context, when the vcpu is blocked, this throttling timer
2611 * will not fire; so the I/O throttling function has to be disabled here
2612 * if it has been enabled.
2614 if (bs->io_limits_enabled) {
2615 fprintf(stderr, "Disabling I/O throttling on '%s' due "
2616 "to synchronous I/O.\n", bdrv_get_device_name(bs));
2617 bdrv_io_limits_disable(bs);
2620 if (qemu_in_coroutine()) {
2621 /* Fast-path if already in coroutine context */
2622 bdrv_rw_co_entry(&rwco);
2623 } else {
2624 co = qemu_coroutine_create(bdrv_rw_co_entry);
2625 qemu_coroutine_enter(co, &rwco);
2626 while (rwco.ret == NOT_DONE) {
2627 qemu_aio_wait();
2630 return rwco.ret;
2634 * Process a synchronous request using coroutines
2636 static int bdrv_rw_co(BlockDriverState *bs, int64_t sector_num, uint8_t *buf,
2637 int nb_sectors, bool is_write, BdrvRequestFlags flags)
2639 QEMUIOVector qiov;
2640 struct iovec iov = {
2641 .iov_base = (void *)buf,
2642 .iov_len = nb_sectors * BDRV_SECTOR_SIZE,
2645 qemu_iovec_init_external(&qiov, &iov, 1);
2646 return bdrv_prwv_co(bs, sector_num << BDRV_SECTOR_BITS,
2647 &qiov, is_write, flags);
2650 /* return < 0 if error. See bdrv_write() for the return codes */
2651 int bdrv_read(BlockDriverState *bs, int64_t sector_num,
2652 uint8_t *buf, int nb_sectors)
2654 return bdrv_rw_co(bs, sector_num, buf, nb_sectors, false, 0);
2657 /* Just like bdrv_read(), but with I/O throttling temporarily disabled */
2658 int bdrv_read_unthrottled(BlockDriverState *bs, int64_t sector_num,
2659 uint8_t *buf, int nb_sectors)
2661 bool enabled;
2662 int ret;
2664 enabled = bs->io_limits_enabled;
2665 bs->io_limits_enabled = false;
2666 ret = bdrv_read(bs, sector_num, buf, nb_sectors);
2667 bs->io_limits_enabled = enabled;
2668 return ret;
2671 /* Return < 0 if error. Important errors are:
2672 -EIO generic I/O error (may happen for all errors)
2673 -ENOMEDIUM No media inserted.
2674 -EINVAL Invalid sector number or nb_sectors
2675 -EACCES Trying to write a read-only device
2677 int bdrv_write(BlockDriverState *bs, int64_t sector_num,
2678 const uint8_t *buf, int nb_sectors)
2680 return bdrv_rw_co(bs, sector_num, (uint8_t *)buf, nb_sectors, true, 0);
2683 int bdrv_write_zeroes(BlockDriverState *bs, int64_t sector_num,
2684 int nb_sectors, BdrvRequestFlags flags)
2686 return bdrv_rw_co(bs, sector_num, NULL, nb_sectors, true,
2687 BDRV_REQ_ZERO_WRITE | flags);
2691 * Completely zero out a block device with the help of bdrv_write_zeroes.
2692 * The operation is sped up by checking the block status and only writing
2693 * zeroes to the device if they currently do not return zeroes. Optional
2694 * flags are passed through to bdrv_write_zeroes (e.g. BDRV_REQ_MAY_UNMAP).
2696 * Returns < 0 on error, 0 on success. For error codes see bdrv_write().
2698 int bdrv_make_zero(BlockDriverState *bs, BdrvRequestFlags flags)
2700 int64_t target_size = bdrv_getlength(bs) / BDRV_SECTOR_SIZE;
2701 int64_t ret, nb_sectors, sector_num = 0;
2702 int n;
2704 for (;;) {
2705 nb_sectors = target_size - sector_num;
2706 if (nb_sectors <= 0) {
2707 return 0;
2709 if (nb_sectors > INT_MAX) {
2710 nb_sectors = INT_MAX;
2712 ret = bdrv_get_block_status(bs, sector_num, nb_sectors, &n);
2713 if (ret < 0) {
2714 error_report("error getting block status at sector %" PRId64 ": %s",
2715 sector_num, strerror(-ret));
2716 return ret;
2718 if (ret & BDRV_BLOCK_ZERO) {
2719 sector_num += n;
2720 continue;
2722 ret = bdrv_write_zeroes(bs, sector_num, n, flags);
2723 if (ret < 0) {
2724 error_report("error writing zeroes at sector %" PRId64 ": %s",
2725 sector_num, strerror(-ret));
2726 return ret;
2728 sector_num += n;
2732 int bdrv_pread(BlockDriverState *bs, int64_t offset, void *buf, int bytes)
2734 QEMUIOVector qiov;
2735 struct iovec iov = {
2736 .iov_base = (void *)buf,
2737 .iov_len = bytes,
2739 int ret;
2741 if (bytes < 0) {
2742 return -EINVAL;
2745 qemu_iovec_init_external(&qiov, &iov, 1);
2746 ret = bdrv_prwv_co(bs, offset, &qiov, false, 0);
2747 if (ret < 0) {
2748 return ret;
2751 return bytes;
2754 int bdrv_pwritev(BlockDriverState *bs, int64_t offset, QEMUIOVector *qiov)
2756 int ret;
2758 ret = bdrv_prwv_co(bs, offset, qiov, true, 0);
2759 if (ret < 0) {
2760 return ret;
2763 return qiov->size;
2766 int bdrv_pwrite(BlockDriverState *bs, int64_t offset,
2767 const void *buf, int bytes)
2769 QEMUIOVector qiov;
2770 struct iovec iov = {
2771 .iov_base = (void *) buf,
2772 .iov_len = bytes,
2775 if (bytes < 0) {
2776 return -EINVAL;
2779 qemu_iovec_init_external(&qiov, &iov, 1);
2780 return bdrv_pwritev(bs, offset, &qiov);
2784 * Writes to the file and ensures that no writes are reordered across this
2785 * request (acts as a barrier)
2787 * Returns 0 on success, -errno in error cases.
2789 int bdrv_pwrite_sync(BlockDriverState *bs, int64_t offset,
2790 const void *buf, int count)
2792 int ret;
2794 ret = bdrv_pwrite(bs, offset, buf, count);
2795 if (ret < 0) {
2796 return ret;
2799 /* No flush needed for cache modes that already do it */
2800 if (bs->enable_write_cache) {
2801 bdrv_flush(bs);
2804 return 0;
2807 static int coroutine_fn bdrv_co_do_copy_on_readv(BlockDriverState *bs,
2808 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov)
2810 /* Perform I/O through a temporary buffer so that users who scribble over
2811 * their read buffer while the operation is in progress do not end up
2812 * modifying the image file. This is critical for zero-copy guest I/O
2813 * where anything might happen inside guest memory.
2815 void *bounce_buffer;
2817 BlockDriver *drv = bs->drv;
2818 struct iovec iov;
2819 QEMUIOVector bounce_qiov;
2820 int64_t cluster_sector_num;
2821 int cluster_nb_sectors;
2822 size_t skip_bytes;
2823 int ret;
2825 /* Cover entire cluster so no additional backing file I/O is required when
2826 * allocating cluster in the image file.
2828 bdrv_round_to_clusters(bs, sector_num, nb_sectors,
2829 &cluster_sector_num, &cluster_nb_sectors);
2831 trace_bdrv_co_do_copy_on_readv(bs, sector_num, nb_sectors,
2832 cluster_sector_num, cluster_nb_sectors);
2834 iov.iov_len = cluster_nb_sectors * BDRV_SECTOR_SIZE;
2835 iov.iov_base = bounce_buffer = qemu_blockalign(bs, iov.iov_len);
2836 qemu_iovec_init_external(&bounce_qiov, &iov, 1);
2838 ret = drv->bdrv_co_readv(bs, cluster_sector_num, cluster_nb_sectors,
2839 &bounce_qiov);
2840 if (ret < 0) {
2841 goto err;
2844 if (drv->bdrv_co_write_zeroes &&
2845 buffer_is_zero(bounce_buffer, iov.iov_len)) {
2846 ret = bdrv_co_do_write_zeroes(bs, cluster_sector_num,
2847 cluster_nb_sectors, 0);
2848 } else {
2849 /* This does not change the data on the disk, it is not necessary
2850 * to flush even in cache=writethrough mode.
2852 ret = drv->bdrv_co_writev(bs, cluster_sector_num, cluster_nb_sectors,
2853 &bounce_qiov);
2856 if (ret < 0) {
2857 /* It might be okay to ignore write errors for guest requests. If this
2858 * is a deliberate copy-on-read then we don't want to ignore the error.
2859 * Simply report it in all cases.
2861 goto err;
2864 skip_bytes = (sector_num - cluster_sector_num) * BDRV_SECTOR_SIZE;
2865 qemu_iovec_from_buf(qiov, 0, bounce_buffer + skip_bytes,
2866 nb_sectors * BDRV_SECTOR_SIZE);
2868 err:
2869 qemu_vfree(bounce_buffer);
2870 return ret;
2874 * Forwards an already correctly aligned request to the BlockDriver. This
2875 * handles copy on read and zeroing after EOF; any other features must be
2876 * implemented by the caller.
2878 static int coroutine_fn bdrv_aligned_preadv(BlockDriverState *bs,
2879 BdrvTrackedRequest *req, int64_t offset, unsigned int bytes,
2880 int64_t align, QEMUIOVector *qiov, int flags)
2882 BlockDriver *drv = bs->drv;
2883 int ret;
2885 int64_t sector_num = offset >> BDRV_SECTOR_BITS;
2886 unsigned int nb_sectors = bytes >> BDRV_SECTOR_BITS;
2888 assert((offset & (BDRV_SECTOR_SIZE - 1)) == 0);
2889 assert((bytes & (BDRV_SECTOR_SIZE - 1)) == 0);
2891 /* Handle Copy on Read and associated serialisation */
2892 if (flags & BDRV_REQ_COPY_ON_READ) {
2893 /* If we touch the same cluster it counts as an overlap. This
2894 * guarantees that allocating writes will be serialized and not race
2895 * with each other for the same cluster. For example, in copy-on-read
2896 * it ensures that the CoR read and write operations are atomic and
2897 * guest writes cannot interleave between them. */
2898 mark_request_serialising(req, bdrv_get_cluster_size(bs));
2901 wait_serialising_requests(req);
2903 if (flags & BDRV_REQ_COPY_ON_READ) {
2904 int pnum;
2906 ret = bdrv_is_allocated(bs, sector_num, nb_sectors, &pnum);
2907 if (ret < 0) {
2908 goto out;
2911 if (!ret || pnum != nb_sectors) {
2912 ret = bdrv_co_do_copy_on_readv(bs, sector_num, nb_sectors, qiov);
2913 goto out;
2917 /* Forward the request to the BlockDriver */
2918 if (!(bs->zero_beyond_eof && bs->growable)) {
2919 ret = drv->bdrv_co_readv(bs, sector_num, nb_sectors, qiov);
2920 } else {
2921 /* Read zeros after EOF of growable BDSes */
2922 int64_t len, total_sectors, max_nb_sectors;
2924 len = bdrv_getlength(bs);
2925 if (len < 0) {
2926 ret = len;
2927 goto out;
2930 total_sectors = DIV_ROUND_UP(len, BDRV_SECTOR_SIZE);
2931 max_nb_sectors = ROUND_UP(MAX(0, total_sectors - sector_num),
2932 align >> BDRV_SECTOR_BITS);
2933 if (max_nb_sectors > 0) {
2934 ret = drv->bdrv_co_readv(bs, sector_num,
2935 MIN(nb_sectors, max_nb_sectors), qiov);
2936 } else {
2937 ret = 0;
2940 /* Reading beyond end of file is supposed to produce zeroes */
2941 if (ret == 0 && total_sectors < sector_num + nb_sectors) {
2942 uint64_t offset = MAX(0, total_sectors - sector_num);
2943 uint64_t bytes = (sector_num + nb_sectors - offset) *
2944 BDRV_SECTOR_SIZE;
2945 qemu_iovec_memset(qiov, offset * BDRV_SECTOR_SIZE, 0, bytes);
2949 out:
2950 return ret;
2954 * Handle a read request in coroutine context
2956 static int coroutine_fn bdrv_co_do_preadv(BlockDriverState *bs,
2957 int64_t offset, unsigned int bytes, QEMUIOVector *qiov,
2958 BdrvRequestFlags flags)
2960 BlockDriver *drv = bs->drv;
2961 BdrvTrackedRequest req;
2963 /* TODO Lift BDRV_SECTOR_SIZE restriction in BlockDriver interface */
2964 uint64_t align = MAX(BDRV_SECTOR_SIZE, bs->request_alignment);
2965 uint8_t *head_buf = NULL;
2966 uint8_t *tail_buf = NULL;
2967 QEMUIOVector local_qiov;
2968 bool use_local_qiov = false;
2969 int ret;
2971 if (!drv) {
2972 return -ENOMEDIUM;
2974 if (bdrv_check_byte_request(bs, offset, bytes)) {
2975 return -EIO;
2978 if (bs->copy_on_read) {
2979 flags |= BDRV_REQ_COPY_ON_READ;
2982 /* throttling disk I/O */
2983 if (bs->io_limits_enabled) {
2984 bdrv_io_limits_intercept(bs, bytes, false);
2987 /* Align read if necessary by padding qiov */
2988 if (offset & (align - 1)) {
2989 head_buf = qemu_blockalign(bs, align);
2990 qemu_iovec_init(&local_qiov, qiov->niov + 2);
2991 qemu_iovec_add(&local_qiov, head_buf, offset & (align - 1));
2992 qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size);
2993 use_local_qiov = true;
2995 bytes += offset & (align - 1);
2996 offset = offset & ~(align - 1);
2999 if ((offset + bytes) & (align - 1)) {
3000 if (!use_local_qiov) {
3001 qemu_iovec_init(&local_qiov, qiov->niov + 1);
3002 qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size);
3003 use_local_qiov = true;
3005 tail_buf = qemu_blockalign(bs, align);
3006 qemu_iovec_add(&local_qiov, tail_buf,
3007 align - ((offset + bytes) & (align - 1)));
3009 bytes = ROUND_UP(bytes, align);
3012 tracked_request_begin(&req, bs, offset, bytes, false);
3013 ret = bdrv_aligned_preadv(bs, &req, offset, bytes, align,
3014 use_local_qiov ? &local_qiov : qiov,
3015 flags);
3016 tracked_request_end(&req);
3018 if (use_local_qiov) {
3019 qemu_iovec_destroy(&local_qiov);
3020 qemu_vfree(head_buf);
3021 qemu_vfree(tail_buf);
3024 return ret;
3027 static int coroutine_fn bdrv_co_do_readv(BlockDriverState *bs,
3028 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov,
3029 BdrvRequestFlags flags)
3031 if (nb_sectors < 0 || nb_sectors > (UINT_MAX >> BDRV_SECTOR_BITS)) {
3032 return -EINVAL;
3035 return bdrv_co_do_preadv(bs, sector_num << BDRV_SECTOR_BITS,
3036 nb_sectors << BDRV_SECTOR_BITS, qiov, flags);
3039 int coroutine_fn bdrv_co_readv(BlockDriverState *bs, int64_t sector_num,
3040 int nb_sectors, QEMUIOVector *qiov)
3042 trace_bdrv_co_readv(bs, sector_num, nb_sectors);
3044 return bdrv_co_do_readv(bs, sector_num, nb_sectors, qiov, 0);
3047 int coroutine_fn bdrv_co_copy_on_readv(BlockDriverState *bs,
3048 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov)
3050 trace_bdrv_co_copy_on_readv(bs, sector_num, nb_sectors);
3052 return bdrv_co_do_readv(bs, sector_num, nb_sectors, qiov,
3053 BDRV_REQ_COPY_ON_READ);
3056 /* if no limit is specified in the BlockLimits use a default
3057 * of 32768 512-byte sectors (16 MiB) per request.
3059 #define MAX_WRITE_ZEROES_DEFAULT 32768
3061 static int coroutine_fn bdrv_co_do_write_zeroes(BlockDriverState *bs,
3062 int64_t sector_num, int nb_sectors, BdrvRequestFlags flags)
3064 BlockDriver *drv = bs->drv;
3065 QEMUIOVector qiov;
3066 struct iovec iov = {0};
3067 int ret = 0;
3069 int max_write_zeroes = bs->bl.max_write_zeroes ?
3070 bs->bl.max_write_zeroes : MAX_WRITE_ZEROES_DEFAULT;
3072 while (nb_sectors > 0 && !ret) {
3073 int num = nb_sectors;
3075 /* Align request. Block drivers can expect the "bulk" of the request
3076 * to be aligned.
3078 if (bs->bl.write_zeroes_alignment
3079 && num > bs->bl.write_zeroes_alignment) {
3080 if (sector_num % bs->bl.write_zeroes_alignment != 0) {
3081 /* Make a small request up to the first aligned sector. */
3082 num = bs->bl.write_zeroes_alignment;
3083 num -= sector_num % bs->bl.write_zeroes_alignment;
3084 } else if ((sector_num + num) % bs->bl.write_zeroes_alignment != 0) {
3085 /* Shorten the request to the last aligned sector. num cannot
3086 * underflow because num > bs->bl.write_zeroes_alignment.
3088 num -= (sector_num + num) % bs->bl.write_zeroes_alignment;
3092 /* limit request size */
3093 if (num > max_write_zeroes) {
3094 num = max_write_zeroes;
3097 ret = -ENOTSUP;
3098 /* First try the efficient write zeroes operation */
3099 if (drv->bdrv_co_write_zeroes) {
3100 ret = drv->bdrv_co_write_zeroes(bs, sector_num, num, flags);
3103 if (ret == -ENOTSUP) {
3104 /* Fall back to bounce buffer if write zeroes is unsupported */
3105 iov.iov_len = num * BDRV_SECTOR_SIZE;
3106 if (iov.iov_base == NULL) {
3107 iov.iov_base = qemu_blockalign(bs, num * BDRV_SECTOR_SIZE);
3108 memset(iov.iov_base, 0, num * BDRV_SECTOR_SIZE);
3110 qemu_iovec_init_external(&qiov, &iov, 1);
3112 ret = drv->bdrv_co_writev(bs, sector_num, num, &qiov);
3114 /* Keep bounce buffer around if it is big enough for all
3115 * all future requests.
3117 if (num < max_write_zeroes) {
3118 qemu_vfree(iov.iov_base);
3119 iov.iov_base = NULL;
3123 sector_num += num;
3124 nb_sectors -= num;
3127 qemu_vfree(iov.iov_base);
3128 return ret;
3132 * Forwards an already correctly aligned write request to the BlockDriver.
3134 static int coroutine_fn bdrv_aligned_pwritev(BlockDriverState *bs,
3135 BdrvTrackedRequest *req, int64_t offset, unsigned int bytes,
3136 QEMUIOVector *qiov, int flags)
3138 BlockDriver *drv = bs->drv;
3139 bool waited;
3140 int ret;
3142 int64_t sector_num = offset >> BDRV_SECTOR_BITS;
3143 unsigned int nb_sectors = bytes >> BDRV_SECTOR_BITS;
3145 assert((offset & (BDRV_SECTOR_SIZE - 1)) == 0);
3146 assert((bytes & (BDRV_SECTOR_SIZE - 1)) == 0);
3148 waited = wait_serialising_requests(req);
3149 assert(!waited || !req->serialising);
3150 assert(req->overlap_offset <= offset);
3151 assert(offset + bytes <= req->overlap_offset + req->overlap_bytes);
3153 ret = notifier_with_return_list_notify(&bs->before_write_notifiers, req);
3155 if (ret < 0) {
3156 /* Do nothing, write notifier decided to fail this request */
3157 } else if (flags & BDRV_REQ_ZERO_WRITE) {
3158 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_ZERO);
3159 ret = bdrv_co_do_write_zeroes(bs, sector_num, nb_sectors, flags);
3160 } else {
3161 BLKDBG_EVENT(bs, BLKDBG_PWRITEV);
3162 ret = drv->bdrv_co_writev(bs, sector_num, nb_sectors, qiov);
3164 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_DONE);
3166 if (ret == 0 && !bs->enable_write_cache) {
3167 ret = bdrv_co_flush(bs);
3170 bdrv_set_dirty(bs, sector_num, nb_sectors);
3172 if (bs->wr_highest_sector < sector_num + nb_sectors - 1) {
3173 bs->wr_highest_sector = sector_num + nb_sectors - 1;
3175 if (bs->growable && ret >= 0) {
3176 bs->total_sectors = MAX(bs->total_sectors, sector_num + nb_sectors);
3179 return ret;
3183 * Handle a write request in coroutine context
3185 static int coroutine_fn bdrv_co_do_pwritev(BlockDriverState *bs,
3186 int64_t offset, unsigned int bytes, QEMUIOVector *qiov,
3187 BdrvRequestFlags flags)
3189 BdrvTrackedRequest req;
3190 /* TODO Lift BDRV_SECTOR_SIZE restriction in BlockDriver interface */
3191 uint64_t align = MAX(BDRV_SECTOR_SIZE, bs->request_alignment);
3192 uint8_t *head_buf = NULL;
3193 uint8_t *tail_buf = NULL;
3194 QEMUIOVector local_qiov;
3195 bool use_local_qiov = false;
3196 int ret;
3198 if (!bs->drv) {
3199 return -ENOMEDIUM;
3201 if (bs->read_only) {
3202 return -EACCES;
3204 if (bdrv_check_byte_request(bs, offset, bytes)) {
3205 return -EIO;
3208 /* throttling disk I/O */
3209 if (bs->io_limits_enabled) {
3210 bdrv_io_limits_intercept(bs, bytes, true);
3214 * Align write if necessary by performing a read-modify-write cycle.
3215 * Pad qiov with the read parts and be sure to have a tracked request not
3216 * only for bdrv_aligned_pwritev, but also for the reads of the RMW cycle.
3218 tracked_request_begin(&req, bs, offset, bytes, true);
3220 if (offset & (align - 1)) {
3221 QEMUIOVector head_qiov;
3222 struct iovec head_iov;
3224 mark_request_serialising(&req, align);
3225 wait_serialising_requests(&req);
3227 head_buf = qemu_blockalign(bs, align);
3228 head_iov = (struct iovec) {
3229 .iov_base = head_buf,
3230 .iov_len = align,
3232 qemu_iovec_init_external(&head_qiov, &head_iov, 1);
3234 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_HEAD);
3235 ret = bdrv_aligned_preadv(bs, &req, offset & ~(align - 1), align,
3236 align, &head_qiov, 0);
3237 if (ret < 0) {
3238 goto fail;
3240 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_AFTER_HEAD);
3242 qemu_iovec_init(&local_qiov, qiov->niov + 2);
3243 qemu_iovec_add(&local_qiov, head_buf, offset & (align - 1));
3244 qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size);
3245 use_local_qiov = true;
3247 bytes += offset & (align - 1);
3248 offset = offset & ~(align - 1);
3251 if ((offset + bytes) & (align - 1)) {
3252 QEMUIOVector tail_qiov;
3253 struct iovec tail_iov;
3254 size_t tail_bytes;
3255 bool waited;
3257 mark_request_serialising(&req, align);
3258 waited = wait_serialising_requests(&req);
3259 assert(!waited || !use_local_qiov);
3261 tail_buf = qemu_blockalign(bs, align);
3262 tail_iov = (struct iovec) {
3263 .iov_base = tail_buf,
3264 .iov_len = align,
3266 qemu_iovec_init_external(&tail_qiov, &tail_iov, 1);
3268 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_TAIL);
3269 ret = bdrv_aligned_preadv(bs, &req, (offset + bytes) & ~(align - 1), align,
3270 align, &tail_qiov, 0);
3271 if (ret < 0) {
3272 goto fail;
3274 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_AFTER_TAIL);
3276 if (!use_local_qiov) {
3277 qemu_iovec_init(&local_qiov, qiov->niov + 1);
3278 qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size);
3279 use_local_qiov = true;
3282 tail_bytes = (offset + bytes) & (align - 1);
3283 qemu_iovec_add(&local_qiov, tail_buf + tail_bytes, align - tail_bytes);
3285 bytes = ROUND_UP(bytes, align);
3288 ret = bdrv_aligned_pwritev(bs, &req, offset, bytes,
3289 use_local_qiov ? &local_qiov : qiov,
3290 flags);
3292 fail:
3293 tracked_request_end(&req);
3295 if (use_local_qiov) {
3296 qemu_iovec_destroy(&local_qiov);
3298 qemu_vfree(head_buf);
3299 qemu_vfree(tail_buf);
3301 return ret;
3304 static int coroutine_fn bdrv_co_do_writev(BlockDriverState *bs,
3305 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov,
3306 BdrvRequestFlags flags)
3308 if (nb_sectors < 0 || nb_sectors > (INT_MAX >> BDRV_SECTOR_BITS)) {
3309 return -EINVAL;
3312 return bdrv_co_do_pwritev(bs, sector_num << BDRV_SECTOR_BITS,
3313 nb_sectors << BDRV_SECTOR_BITS, qiov, flags);
3316 int coroutine_fn bdrv_co_writev(BlockDriverState *bs, int64_t sector_num,
3317 int nb_sectors, QEMUIOVector *qiov)
3319 trace_bdrv_co_writev(bs, sector_num, nb_sectors);
3321 return bdrv_co_do_writev(bs, sector_num, nb_sectors, qiov, 0);
3324 int coroutine_fn bdrv_co_write_zeroes(BlockDriverState *bs,
3325 int64_t sector_num, int nb_sectors,
3326 BdrvRequestFlags flags)
3328 trace_bdrv_co_write_zeroes(bs, sector_num, nb_sectors, flags);
3330 if (!(bs->open_flags & BDRV_O_UNMAP)) {
3331 flags &= ~BDRV_REQ_MAY_UNMAP;
3334 return bdrv_co_do_writev(bs, sector_num, nb_sectors, NULL,
3335 BDRV_REQ_ZERO_WRITE | flags);
3339 * Truncate file to 'offset' bytes (needed only for file protocols)
3341 int bdrv_truncate(BlockDriverState *bs, int64_t offset)
3343 BlockDriver *drv = bs->drv;
3344 int ret;
3345 if (!drv)
3346 return -ENOMEDIUM;
3347 if (!drv->bdrv_truncate)
3348 return -ENOTSUP;
3349 if (bs->read_only)
3350 return -EACCES;
3351 if (bdrv_in_use(bs))
3352 return -EBUSY;
3353 ret = drv->bdrv_truncate(bs, offset);
3354 if (ret == 0) {
3355 ret = refresh_total_sectors(bs, offset >> BDRV_SECTOR_BITS);
3356 bdrv_dev_resize_cb(bs);
3358 return ret;
3362 * Length of a allocated file in bytes. Sparse files are counted by actual
3363 * allocated space. Return < 0 if error or unknown.
3365 int64_t bdrv_get_allocated_file_size(BlockDriverState *bs)
3367 BlockDriver *drv = bs->drv;
3368 if (!drv) {
3369 return -ENOMEDIUM;
3371 if (drv->bdrv_get_allocated_file_size) {
3372 return drv->bdrv_get_allocated_file_size(bs);
3374 if (bs->file) {
3375 return bdrv_get_allocated_file_size(bs->file);
3377 return -ENOTSUP;
3381 * Length of a file in bytes. Return < 0 if error or unknown.
3383 int64_t bdrv_getlength(BlockDriverState *bs)
3385 BlockDriver *drv = bs->drv;
3386 if (!drv)
3387 return -ENOMEDIUM;
3389 if (drv->has_variable_length) {
3390 int ret = refresh_total_sectors(bs, bs->total_sectors);
3391 if (ret < 0) {
3392 return ret;
3395 return bs->total_sectors * BDRV_SECTOR_SIZE;
3398 /* return 0 as number of sectors if no device present or error */
3399 void bdrv_get_geometry(BlockDriverState *bs, uint64_t *nb_sectors_ptr)
3401 int64_t length;
3402 length = bdrv_getlength(bs);
3403 if (length < 0)
3404 length = 0;
3405 else
3406 length = length >> BDRV_SECTOR_BITS;
3407 *nb_sectors_ptr = length;
3410 void bdrv_set_on_error(BlockDriverState *bs, BlockdevOnError on_read_error,
3411 BlockdevOnError on_write_error)
3413 bs->on_read_error = on_read_error;
3414 bs->on_write_error = on_write_error;
3417 BlockdevOnError bdrv_get_on_error(BlockDriverState *bs, bool is_read)
3419 return is_read ? bs->on_read_error : bs->on_write_error;
3422 BlockErrorAction bdrv_get_error_action(BlockDriverState *bs, bool is_read, int error)
3424 BlockdevOnError on_err = is_read ? bs->on_read_error : bs->on_write_error;
3426 switch (on_err) {
3427 case BLOCKDEV_ON_ERROR_ENOSPC:
3428 return (error == ENOSPC) ? BDRV_ACTION_STOP : BDRV_ACTION_REPORT;
3429 case BLOCKDEV_ON_ERROR_STOP:
3430 return BDRV_ACTION_STOP;
3431 case BLOCKDEV_ON_ERROR_REPORT:
3432 return BDRV_ACTION_REPORT;
3433 case BLOCKDEV_ON_ERROR_IGNORE:
3434 return BDRV_ACTION_IGNORE;
3435 default:
3436 abort();
3440 /* This is done by device models because, while the block layer knows
3441 * about the error, it does not know whether an operation comes from
3442 * the device or the block layer (from a job, for example).
3444 void bdrv_error_action(BlockDriverState *bs, BlockErrorAction action,
3445 bool is_read, int error)
3447 assert(error >= 0);
3448 bdrv_emit_qmp_error_event(bs, QEVENT_BLOCK_IO_ERROR, action, is_read);
3449 if (action == BDRV_ACTION_STOP) {
3450 vm_stop(RUN_STATE_IO_ERROR);
3451 bdrv_iostatus_set_err(bs, error);
3455 int bdrv_is_read_only(BlockDriverState *bs)
3457 return bs->read_only;
3460 int bdrv_is_sg(BlockDriverState *bs)
3462 return bs->sg;
3465 int bdrv_enable_write_cache(BlockDriverState *bs)
3467 return bs->enable_write_cache;
3470 void bdrv_set_enable_write_cache(BlockDriverState *bs, bool wce)
3472 bs->enable_write_cache = wce;
3474 /* so a reopen() will preserve wce */
3475 if (wce) {
3476 bs->open_flags |= BDRV_O_CACHE_WB;
3477 } else {
3478 bs->open_flags &= ~BDRV_O_CACHE_WB;
3482 int bdrv_is_encrypted(BlockDriverState *bs)
3484 if (bs->backing_hd && bs->backing_hd->encrypted)
3485 return 1;
3486 return bs->encrypted;
3489 int bdrv_key_required(BlockDriverState *bs)
3491 BlockDriverState *backing_hd = bs->backing_hd;
3493 if (backing_hd && backing_hd->encrypted && !backing_hd->valid_key)
3494 return 1;
3495 return (bs->encrypted && !bs->valid_key);
3498 int bdrv_set_key(BlockDriverState *bs, const char *key)
3500 int ret;
3501 if (bs->backing_hd && bs->backing_hd->encrypted) {
3502 ret = bdrv_set_key(bs->backing_hd, key);
3503 if (ret < 0)
3504 return ret;
3505 if (!bs->encrypted)
3506 return 0;
3508 if (!bs->encrypted) {
3509 return -EINVAL;
3510 } else if (!bs->drv || !bs->drv->bdrv_set_key) {
3511 return -ENOMEDIUM;
3513 ret = bs->drv->bdrv_set_key(bs, key);
3514 if (ret < 0) {
3515 bs->valid_key = 0;
3516 } else if (!bs->valid_key) {
3517 bs->valid_key = 1;
3518 /* call the change callback now, we skipped it on open */
3519 bdrv_dev_change_media_cb(bs, true);
3521 return ret;
3524 const char *bdrv_get_format_name(BlockDriverState *bs)
3526 return bs->drv ? bs->drv->format_name : NULL;
3529 void bdrv_iterate_format(void (*it)(void *opaque, const char *name),
3530 void *opaque)
3532 BlockDriver *drv;
3534 QLIST_FOREACH(drv, &bdrv_drivers, list) {
3535 it(opaque, drv->format_name);
3539 /* This function is to find block backend bs */
3540 BlockDriverState *bdrv_find(const char *name)
3542 BlockDriverState *bs;
3544 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
3545 if (!strcmp(name, bs->device_name)) {
3546 return bs;
3549 return NULL;
3552 /* This function is to find a node in the bs graph */
3553 BlockDriverState *bdrv_find_node(const char *node_name)
3555 BlockDriverState *bs;
3557 assert(node_name);
3559 QTAILQ_FOREACH(bs, &graph_bdrv_states, node_list) {
3560 if (!strcmp(node_name, bs->node_name)) {
3561 return bs;
3564 return NULL;
3567 /* Put this QMP function here so it can access the static graph_bdrv_states. */
3568 BlockDeviceInfoList *bdrv_named_nodes_list(void)
3570 BlockDeviceInfoList *list, *entry;
3571 BlockDriverState *bs;
3573 list = NULL;
3574 QTAILQ_FOREACH(bs, &graph_bdrv_states, node_list) {
3575 entry = g_malloc0(sizeof(*entry));
3576 entry->value = bdrv_block_device_info(bs);
3577 entry->next = list;
3578 list = entry;
3581 return list;
3584 BlockDriverState *bdrv_lookup_bs(const char *device,
3585 const char *node_name,
3586 Error **errp)
3588 BlockDriverState *bs = NULL;
3590 if (device) {
3591 bs = bdrv_find(device);
3593 if (bs) {
3594 return bs;
3598 if (node_name) {
3599 bs = bdrv_find_node(node_name);
3601 if (bs) {
3602 return bs;
3606 error_setg(errp, "Cannot find device=%s nor node_name=%s",
3607 device ? device : "",
3608 node_name ? node_name : "");
3609 return NULL;
3612 BlockDriverState *bdrv_next(BlockDriverState *bs)
3614 if (!bs) {
3615 return QTAILQ_FIRST(&bdrv_states);
3617 return QTAILQ_NEXT(bs, device_list);
3620 void bdrv_iterate(void (*it)(void *opaque, BlockDriverState *bs), void *opaque)
3622 BlockDriverState *bs;
3624 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
3625 it(opaque, bs);
3629 const char *bdrv_get_device_name(BlockDriverState *bs)
3631 return bs->device_name;
3634 int bdrv_get_flags(BlockDriverState *bs)
3636 return bs->open_flags;
3639 int bdrv_flush_all(void)
3641 BlockDriverState *bs;
3642 int result = 0;
3644 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
3645 int ret = bdrv_flush(bs);
3646 if (ret < 0 && !result) {
3647 result = ret;
3651 return result;
3654 int bdrv_has_zero_init_1(BlockDriverState *bs)
3656 return 1;
3659 int bdrv_has_zero_init(BlockDriverState *bs)
3661 assert(bs->drv);
3663 /* If BS is a copy on write image, it is initialized to
3664 the contents of the base image, which may not be zeroes. */
3665 if (bs->backing_hd) {
3666 return 0;
3668 if (bs->drv->bdrv_has_zero_init) {
3669 return bs->drv->bdrv_has_zero_init(bs);
3672 /* safe default */
3673 return 0;
3676 bool bdrv_unallocated_blocks_are_zero(BlockDriverState *bs)
3678 BlockDriverInfo bdi;
3680 if (bs->backing_hd) {
3681 return false;
3684 if (bdrv_get_info(bs, &bdi) == 0) {
3685 return bdi.unallocated_blocks_are_zero;
3688 return false;
3691 bool bdrv_can_write_zeroes_with_unmap(BlockDriverState *bs)
3693 BlockDriverInfo bdi;
3695 if (bs->backing_hd || !(bs->open_flags & BDRV_O_UNMAP)) {
3696 return false;
3699 if (bdrv_get_info(bs, &bdi) == 0) {
3700 return bdi.can_write_zeroes_with_unmap;
3703 return false;
3706 typedef struct BdrvCoGetBlockStatusData {
3707 BlockDriverState *bs;
3708 BlockDriverState *base;
3709 int64_t sector_num;
3710 int nb_sectors;
3711 int *pnum;
3712 int64_t ret;
3713 bool done;
3714 } BdrvCoGetBlockStatusData;
3717 * Returns true iff the specified sector is present in the disk image. Drivers
3718 * not implementing the functionality are assumed to not support backing files,
3719 * hence all their sectors are reported as allocated.
3721 * If 'sector_num' is beyond the end of the disk image the return value is 0
3722 * and 'pnum' is set to 0.
3724 * 'pnum' is set to the number of sectors (including and immediately following
3725 * the specified sector) that are known to be in the same
3726 * allocated/unallocated state.
3728 * 'nb_sectors' is the max value 'pnum' should be set to. If nb_sectors goes
3729 * beyond the end of the disk image it will be clamped.
3731 static int64_t coroutine_fn bdrv_co_get_block_status(BlockDriverState *bs,
3732 int64_t sector_num,
3733 int nb_sectors, int *pnum)
3735 int64_t length;
3736 int64_t n;
3737 int64_t ret, ret2;
3739 length = bdrv_getlength(bs);
3740 if (length < 0) {
3741 return length;
3744 if (sector_num >= (length >> BDRV_SECTOR_BITS)) {
3745 *pnum = 0;
3746 return 0;
3749 n = bs->total_sectors - sector_num;
3750 if (n < nb_sectors) {
3751 nb_sectors = n;
3754 if (!bs->drv->bdrv_co_get_block_status) {
3755 *pnum = nb_sectors;
3756 ret = BDRV_BLOCK_DATA;
3757 if (bs->drv->protocol_name) {
3758 ret |= BDRV_BLOCK_OFFSET_VALID | (sector_num * BDRV_SECTOR_SIZE);
3760 return ret;
3763 ret = bs->drv->bdrv_co_get_block_status(bs, sector_num, nb_sectors, pnum);
3764 if (ret < 0) {
3765 *pnum = 0;
3766 return ret;
3769 if (ret & BDRV_BLOCK_RAW) {
3770 assert(ret & BDRV_BLOCK_OFFSET_VALID);
3771 return bdrv_get_block_status(bs->file, ret >> BDRV_SECTOR_BITS,
3772 *pnum, pnum);
3775 if (!(ret & BDRV_BLOCK_DATA) && !(ret & BDRV_BLOCK_ZERO)) {
3776 if (bdrv_unallocated_blocks_are_zero(bs)) {
3777 ret |= BDRV_BLOCK_ZERO;
3778 } else if (bs->backing_hd) {
3779 BlockDriverState *bs2 = bs->backing_hd;
3780 int64_t length2 = bdrv_getlength(bs2);
3781 if (length2 >= 0 && sector_num >= (length2 >> BDRV_SECTOR_BITS)) {
3782 ret |= BDRV_BLOCK_ZERO;
3787 if (bs->file &&
3788 (ret & BDRV_BLOCK_DATA) && !(ret & BDRV_BLOCK_ZERO) &&
3789 (ret & BDRV_BLOCK_OFFSET_VALID)) {
3790 ret2 = bdrv_co_get_block_status(bs->file, ret >> BDRV_SECTOR_BITS,
3791 *pnum, pnum);
3792 if (ret2 >= 0) {
3793 /* Ignore errors. This is just providing extra information, it
3794 * is useful but not necessary.
3796 ret |= (ret2 & BDRV_BLOCK_ZERO);
3800 return ret;
3803 /* Coroutine wrapper for bdrv_get_block_status() */
3804 static void coroutine_fn bdrv_get_block_status_co_entry(void *opaque)
3806 BdrvCoGetBlockStatusData *data = opaque;
3807 BlockDriverState *bs = data->bs;
3809 data->ret = bdrv_co_get_block_status(bs, data->sector_num, data->nb_sectors,
3810 data->pnum);
3811 data->done = true;
3815 * Synchronous wrapper around bdrv_co_get_block_status().
3817 * See bdrv_co_get_block_status() for details.
3819 int64_t bdrv_get_block_status(BlockDriverState *bs, int64_t sector_num,
3820 int nb_sectors, int *pnum)
3822 Coroutine *co;
3823 BdrvCoGetBlockStatusData data = {
3824 .bs = bs,
3825 .sector_num = sector_num,
3826 .nb_sectors = nb_sectors,
3827 .pnum = pnum,
3828 .done = false,
3831 if (qemu_in_coroutine()) {
3832 /* Fast-path if already in coroutine context */
3833 bdrv_get_block_status_co_entry(&data);
3834 } else {
3835 co = qemu_coroutine_create(bdrv_get_block_status_co_entry);
3836 qemu_coroutine_enter(co, &data);
3837 while (!data.done) {
3838 qemu_aio_wait();
3841 return data.ret;
3844 int coroutine_fn bdrv_is_allocated(BlockDriverState *bs, int64_t sector_num,
3845 int nb_sectors, int *pnum)
3847 int64_t ret = bdrv_get_block_status(bs, sector_num, nb_sectors, pnum);
3848 if (ret < 0) {
3849 return ret;
3851 return
3852 (ret & BDRV_BLOCK_DATA) ||
3853 ((ret & BDRV_BLOCK_ZERO) && !bdrv_has_zero_init(bs));
3857 * Given an image chain: ... -> [BASE] -> [INTER1] -> [INTER2] -> [TOP]
3859 * Return true if the given sector is allocated in any image between
3860 * BASE and TOP (inclusive). BASE can be NULL to check if the given
3861 * sector is allocated in any image of the chain. Return false otherwise.
3863 * 'pnum' is set to the number of sectors (including and immediately following
3864 * the specified sector) that are known to be in the same
3865 * allocated/unallocated state.
3868 int bdrv_is_allocated_above(BlockDriverState *top,
3869 BlockDriverState *base,
3870 int64_t sector_num,
3871 int nb_sectors, int *pnum)
3873 BlockDriverState *intermediate;
3874 int ret, n = nb_sectors;
3876 intermediate = top;
3877 while (intermediate && intermediate != base) {
3878 int pnum_inter;
3879 ret = bdrv_is_allocated(intermediate, sector_num, nb_sectors,
3880 &pnum_inter);
3881 if (ret < 0) {
3882 return ret;
3883 } else if (ret) {
3884 *pnum = pnum_inter;
3885 return 1;
3889 * [sector_num, nb_sectors] is unallocated on top but intermediate
3890 * might have
3892 * [sector_num+x, nr_sectors] allocated.
3894 if (n > pnum_inter &&
3895 (intermediate == top ||
3896 sector_num + pnum_inter < intermediate->total_sectors)) {
3897 n = pnum_inter;
3900 intermediate = intermediate->backing_hd;
3903 *pnum = n;
3904 return 0;
3907 const char *bdrv_get_encrypted_filename(BlockDriverState *bs)
3909 if (bs->backing_hd && bs->backing_hd->encrypted)
3910 return bs->backing_file;
3911 else if (bs->encrypted)
3912 return bs->filename;
3913 else
3914 return NULL;
3917 void bdrv_get_backing_filename(BlockDriverState *bs,
3918 char *filename, int filename_size)
3920 pstrcpy(filename, filename_size, bs->backing_file);
3923 int bdrv_write_compressed(BlockDriverState *bs, int64_t sector_num,
3924 const uint8_t *buf, int nb_sectors)
3926 BlockDriver *drv = bs->drv;
3927 if (!drv)
3928 return -ENOMEDIUM;
3929 if (!drv->bdrv_write_compressed)
3930 return -ENOTSUP;
3931 if (bdrv_check_request(bs, sector_num, nb_sectors))
3932 return -EIO;
3934 assert(QLIST_EMPTY(&bs->dirty_bitmaps));
3936 return drv->bdrv_write_compressed(bs, sector_num, buf, nb_sectors);
3939 int bdrv_get_info(BlockDriverState *bs, BlockDriverInfo *bdi)
3941 BlockDriver *drv = bs->drv;
3942 if (!drv)
3943 return -ENOMEDIUM;
3944 if (!drv->bdrv_get_info)
3945 return -ENOTSUP;
3946 memset(bdi, 0, sizeof(*bdi));
3947 return drv->bdrv_get_info(bs, bdi);
3950 ImageInfoSpecific *bdrv_get_specific_info(BlockDriverState *bs)
3952 BlockDriver *drv = bs->drv;
3953 if (drv && drv->bdrv_get_specific_info) {
3954 return drv->bdrv_get_specific_info(bs);
3956 return NULL;
3959 int bdrv_save_vmstate(BlockDriverState *bs, const uint8_t *buf,
3960 int64_t pos, int size)
3962 QEMUIOVector qiov;
3963 struct iovec iov = {
3964 .iov_base = (void *) buf,
3965 .iov_len = size,
3968 qemu_iovec_init_external(&qiov, &iov, 1);
3969 return bdrv_writev_vmstate(bs, &qiov, pos);
3972 int bdrv_writev_vmstate(BlockDriverState *bs, QEMUIOVector *qiov, int64_t pos)
3974 BlockDriver *drv = bs->drv;
3976 if (!drv) {
3977 return -ENOMEDIUM;
3978 } else if (drv->bdrv_save_vmstate) {
3979 return drv->bdrv_save_vmstate(bs, qiov, pos);
3980 } else if (bs->file) {
3981 return bdrv_writev_vmstate(bs->file, qiov, pos);
3984 return -ENOTSUP;
3987 int bdrv_load_vmstate(BlockDriverState *bs, uint8_t *buf,
3988 int64_t pos, int size)
3990 BlockDriver *drv = bs->drv;
3991 if (!drv)
3992 return -ENOMEDIUM;
3993 if (drv->bdrv_load_vmstate)
3994 return drv->bdrv_load_vmstate(bs, buf, pos, size);
3995 if (bs->file)
3996 return bdrv_load_vmstate(bs->file, buf, pos, size);
3997 return -ENOTSUP;
4000 void bdrv_debug_event(BlockDriverState *bs, BlkDebugEvent event)
4002 if (!bs || !bs->drv || !bs->drv->bdrv_debug_event) {
4003 return;
4006 bs->drv->bdrv_debug_event(bs, event);
4009 int bdrv_debug_breakpoint(BlockDriverState *bs, const char *event,
4010 const char *tag)
4012 while (bs && bs->drv && !bs->drv->bdrv_debug_breakpoint) {
4013 bs = bs->file;
4016 if (bs && bs->drv && bs->drv->bdrv_debug_breakpoint) {
4017 return bs->drv->bdrv_debug_breakpoint(bs, event, tag);
4020 return -ENOTSUP;
4023 int bdrv_debug_remove_breakpoint(BlockDriverState *bs, const char *tag)
4025 while (bs && bs->drv && !bs->drv->bdrv_debug_remove_breakpoint) {
4026 bs = bs->file;
4029 if (bs && bs->drv && bs->drv->bdrv_debug_remove_breakpoint) {
4030 return bs->drv->bdrv_debug_remove_breakpoint(bs, tag);
4033 return -ENOTSUP;
4036 int bdrv_debug_resume(BlockDriverState *bs, const char *tag)
4038 while (bs && bs->drv && !bs->drv->bdrv_debug_resume) {
4039 bs = bs->file;
4042 if (bs && bs->drv && bs->drv->bdrv_debug_resume) {
4043 return bs->drv->bdrv_debug_resume(bs, tag);
4046 return -ENOTSUP;
4049 bool bdrv_debug_is_suspended(BlockDriverState *bs, const char *tag)
4051 while (bs && bs->drv && !bs->drv->bdrv_debug_is_suspended) {
4052 bs = bs->file;
4055 if (bs && bs->drv && bs->drv->bdrv_debug_is_suspended) {
4056 return bs->drv->bdrv_debug_is_suspended(bs, tag);
4059 return false;
4062 int bdrv_is_snapshot(BlockDriverState *bs)
4064 return !!(bs->open_flags & BDRV_O_SNAPSHOT);
4067 /* backing_file can either be relative, or absolute, or a protocol. If it is
4068 * relative, it must be relative to the chain. So, passing in bs->filename
4069 * from a BDS as backing_file should not be done, as that may be relative to
4070 * the CWD rather than the chain. */
4071 BlockDriverState *bdrv_find_backing_image(BlockDriverState *bs,
4072 const char *backing_file)
4074 char *filename_full = NULL;
4075 char *backing_file_full = NULL;
4076 char *filename_tmp = NULL;
4077 int is_protocol = 0;
4078 BlockDriverState *curr_bs = NULL;
4079 BlockDriverState *retval = NULL;
4081 if (!bs || !bs->drv || !backing_file) {
4082 return NULL;
4085 filename_full = g_malloc(PATH_MAX);
4086 backing_file_full = g_malloc(PATH_MAX);
4087 filename_tmp = g_malloc(PATH_MAX);
4089 is_protocol = path_has_protocol(backing_file);
4091 for (curr_bs = bs; curr_bs->backing_hd; curr_bs = curr_bs->backing_hd) {
4093 /* If either of the filename paths is actually a protocol, then
4094 * compare unmodified paths; otherwise make paths relative */
4095 if (is_protocol || path_has_protocol(curr_bs->backing_file)) {
4096 if (strcmp(backing_file, curr_bs->backing_file) == 0) {
4097 retval = curr_bs->backing_hd;
4098 break;
4100 } else {
4101 /* If not an absolute filename path, make it relative to the current
4102 * image's filename path */
4103 path_combine(filename_tmp, PATH_MAX, curr_bs->filename,
4104 backing_file);
4106 /* We are going to compare absolute pathnames */
4107 if (!realpath(filename_tmp, filename_full)) {
4108 continue;
4111 /* We need to make sure the backing filename we are comparing against
4112 * is relative to the current image filename (or absolute) */
4113 path_combine(filename_tmp, PATH_MAX, curr_bs->filename,
4114 curr_bs->backing_file);
4116 if (!realpath(filename_tmp, backing_file_full)) {
4117 continue;
4120 if (strcmp(backing_file_full, filename_full) == 0) {
4121 retval = curr_bs->backing_hd;
4122 break;
4127 g_free(filename_full);
4128 g_free(backing_file_full);
4129 g_free(filename_tmp);
4130 return retval;
4133 int bdrv_get_backing_file_depth(BlockDriverState *bs)
4135 if (!bs->drv) {
4136 return 0;
4139 if (!bs->backing_hd) {
4140 return 0;
4143 return 1 + bdrv_get_backing_file_depth(bs->backing_hd);
4146 BlockDriverState *bdrv_find_base(BlockDriverState *bs)
4148 BlockDriverState *curr_bs = NULL;
4150 if (!bs) {
4151 return NULL;
4154 curr_bs = bs;
4156 while (curr_bs->backing_hd) {
4157 curr_bs = curr_bs->backing_hd;
4159 return curr_bs;
4162 /**************************************************************/
4163 /* async I/Os */
4165 BlockDriverAIOCB *bdrv_aio_readv(BlockDriverState *bs, int64_t sector_num,
4166 QEMUIOVector *qiov, int nb_sectors,
4167 BlockDriverCompletionFunc *cb, void *opaque)
4169 trace_bdrv_aio_readv(bs, sector_num, nb_sectors, opaque);
4171 return bdrv_co_aio_rw_vector(bs, sector_num, qiov, nb_sectors, 0,
4172 cb, opaque, false);
4175 BlockDriverAIOCB *bdrv_aio_writev(BlockDriverState *bs, int64_t sector_num,
4176 QEMUIOVector *qiov, int nb_sectors,
4177 BlockDriverCompletionFunc *cb, void *opaque)
4179 trace_bdrv_aio_writev(bs, sector_num, nb_sectors, opaque);
4181 return bdrv_co_aio_rw_vector(bs, sector_num, qiov, nb_sectors, 0,
4182 cb, opaque, true);
4185 BlockDriverAIOCB *bdrv_aio_write_zeroes(BlockDriverState *bs,
4186 int64_t sector_num, int nb_sectors, BdrvRequestFlags flags,
4187 BlockDriverCompletionFunc *cb, void *opaque)
4189 trace_bdrv_aio_write_zeroes(bs, sector_num, nb_sectors, flags, opaque);
4191 return bdrv_co_aio_rw_vector(bs, sector_num, NULL, nb_sectors,
4192 BDRV_REQ_ZERO_WRITE | flags,
4193 cb, opaque, true);
4197 typedef struct MultiwriteCB {
4198 int error;
4199 int num_requests;
4200 int num_callbacks;
4201 struct {
4202 BlockDriverCompletionFunc *cb;
4203 void *opaque;
4204 QEMUIOVector *free_qiov;
4205 } callbacks[];
4206 } MultiwriteCB;
4208 static void multiwrite_user_cb(MultiwriteCB *mcb)
4210 int i;
4212 for (i = 0; i < mcb->num_callbacks; i++) {
4213 mcb->callbacks[i].cb(mcb->callbacks[i].opaque, mcb->error);
4214 if (mcb->callbacks[i].free_qiov) {
4215 qemu_iovec_destroy(mcb->callbacks[i].free_qiov);
4217 g_free(mcb->callbacks[i].free_qiov);
4221 static void multiwrite_cb(void *opaque, int ret)
4223 MultiwriteCB *mcb = opaque;
4225 trace_multiwrite_cb(mcb, ret);
4227 if (ret < 0 && !mcb->error) {
4228 mcb->error = ret;
4231 mcb->num_requests--;
4232 if (mcb->num_requests == 0) {
4233 multiwrite_user_cb(mcb);
4234 g_free(mcb);
4238 static int multiwrite_req_compare(const void *a, const void *b)
4240 const BlockRequest *req1 = a, *req2 = b;
4243 * Note that we can't simply subtract req2->sector from req1->sector
4244 * here as that could overflow the return value.
4246 if (req1->sector > req2->sector) {
4247 return 1;
4248 } else if (req1->sector < req2->sector) {
4249 return -1;
4250 } else {
4251 return 0;
4256 * Takes a bunch of requests and tries to merge them. Returns the number of
4257 * requests that remain after merging.
4259 static int multiwrite_merge(BlockDriverState *bs, BlockRequest *reqs,
4260 int num_reqs, MultiwriteCB *mcb)
4262 int i, outidx;
4264 // Sort requests by start sector
4265 qsort(reqs, num_reqs, sizeof(*reqs), &multiwrite_req_compare);
4267 // Check if adjacent requests touch the same clusters. If so, combine them,
4268 // filling up gaps with zero sectors.
4269 outidx = 0;
4270 for (i = 1; i < num_reqs; i++) {
4271 int merge = 0;
4272 int64_t oldreq_last = reqs[outidx].sector + reqs[outidx].nb_sectors;
4274 // Handle exactly sequential writes and overlapping writes.
4275 if (reqs[i].sector <= oldreq_last) {
4276 merge = 1;
4279 if (reqs[outidx].qiov->niov + reqs[i].qiov->niov + 1 > IOV_MAX) {
4280 merge = 0;
4283 if (merge) {
4284 size_t size;
4285 QEMUIOVector *qiov = g_malloc0(sizeof(*qiov));
4286 qemu_iovec_init(qiov,
4287 reqs[outidx].qiov->niov + reqs[i].qiov->niov + 1);
4289 // Add the first request to the merged one. If the requests are
4290 // overlapping, drop the last sectors of the first request.
4291 size = (reqs[i].sector - reqs[outidx].sector) << 9;
4292 qemu_iovec_concat(qiov, reqs[outidx].qiov, 0, size);
4294 // We should need to add any zeros between the two requests
4295 assert (reqs[i].sector <= oldreq_last);
4297 // Add the second request
4298 qemu_iovec_concat(qiov, reqs[i].qiov, 0, reqs[i].qiov->size);
4300 reqs[outidx].nb_sectors = qiov->size >> 9;
4301 reqs[outidx].qiov = qiov;
4303 mcb->callbacks[i].free_qiov = reqs[outidx].qiov;
4304 } else {
4305 outidx++;
4306 reqs[outidx].sector = reqs[i].sector;
4307 reqs[outidx].nb_sectors = reqs[i].nb_sectors;
4308 reqs[outidx].qiov = reqs[i].qiov;
4312 return outidx + 1;
4316 * Submit multiple AIO write requests at once.
4318 * On success, the function returns 0 and all requests in the reqs array have
4319 * been submitted. In error case this function returns -1, and any of the
4320 * requests may or may not be submitted yet. In particular, this means that the
4321 * callback will be called for some of the requests, for others it won't. The
4322 * caller must check the error field of the BlockRequest to wait for the right
4323 * callbacks (if error != 0, no callback will be called).
4325 * The implementation may modify the contents of the reqs array, e.g. to merge
4326 * requests. However, the fields opaque and error are left unmodified as they
4327 * are used to signal failure for a single request to the caller.
4329 int bdrv_aio_multiwrite(BlockDriverState *bs, BlockRequest *reqs, int num_reqs)
4331 MultiwriteCB *mcb;
4332 int i;
4334 /* don't submit writes if we don't have a medium */
4335 if (bs->drv == NULL) {
4336 for (i = 0; i < num_reqs; i++) {
4337 reqs[i].error = -ENOMEDIUM;
4339 return -1;
4342 if (num_reqs == 0) {
4343 return 0;
4346 // Create MultiwriteCB structure
4347 mcb = g_malloc0(sizeof(*mcb) + num_reqs * sizeof(*mcb->callbacks));
4348 mcb->num_requests = 0;
4349 mcb->num_callbacks = num_reqs;
4351 for (i = 0; i < num_reqs; i++) {
4352 mcb->callbacks[i].cb = reqs[i].cb;
4353 mcb->callbacks[i].opaque = reqs[i].opaque;
4356 // Check for mergable requests
4357 num_reqs = multiwrite_merge(bs, reqs, num_reqs, mcb);
4359 trace_bdrv_aio_multiwrite(mcb, mcb->num_callbacks, num_reqs);
4361 /* Run the aio requests. */
4362 mcb->num_requests = num_reqs;
4363 for (i = 0; i < num_reqs; i++) {
4364 bdrv_co_aio_rw_vector(bs, reqs[i].sector, reqs[i].qiov,
4365 reqs[i].nb_sectors, reqs[i].flags,
4366 multiwrite_cb, mcb,
4367 true);
4370 return 0;
4373 void bdrv_aio_cancel(BlockDriverAIOCB *acb)
4375 acb->aiocb_info->cancel(acb);
4378 /**************************************************************/
4379 /* async block device emulation */
4381 typedef struct BlockDriverAIOCBSync {
4382 BlockDriverAIOCB common;
4383 QEMUBH *bh;
4384 int ret;
4385 /* vector translation state */
4386 QEMUIOVector *qiov;
4387 uint8_t *bounce;
4388 int is_write;
4389 } BlockDriverAIOCBSync;
4391 static void bdrv_aio_cancel_em(BlockDriverAIOCB *blockacb)
4393 BlockDriverAIOCBSync *acb =
4394 container_of(blockacb, BlockDriverAIOCBSync, common);
4395 qemu_bh_delete(acb->bh);
4396 acb->bh = NULL;
4397 qemu_aio_release(acb);
4400 static const AIOCBInfo bdrv_em_aiocb_info = {
4401 .aiocb_size = sizeof(BlockDriverAIOCBSync),
4402 .cancel = bdrv_aio_cancel_em,
4405 static void bdrv_aio_bh_cb(void *opaque)
4407 BlockDriverAIOCBSync *acb = opaque;
4409 if (!acb->is_write)
4410 qemu_iovec_from_buf(acb->qiov, 0, acb->bounce, acb->qiov->size);
4411 qemu_vfree(acb->bounce);
4412 acb->common.cb(acb->common.opaque, acb->ret);
4413 qemu_bh_delete(acb->bh);
4414 acb->bh = NULL;
4415 qemu_aio_release(acb);
4418 static BlockDriverAIOCB *bdrv_aio_rw_vector(BlockDriverState *bs,
4419 int64_t sector_num,
4420 QEMUIOVector *qiov,
4421 int nb_sectors,
4422 BlockDriverCompletionFunc *cb,
4423 void *opaque,
4424 int is_write)
4427 BlockDriverAIOCBSync *acb;
4429 acb = qemu_aio_get(&bdrv_em_aiocb_info, bs, cb, opaque);
4430 acb->is_write = is_write;
4431 acb->qiov = qiov;
4432 acb->bounce = qemu_blockalign(bs, qiov->size);
4433 acb->bh = qemu_bh_new(bdrv_aio_bh_cb, acb);
4435 if (is_write) {
4436 qemu_iovec_to_buf(acb->qiov, 0, acb->bounce, qiov->size);
4437 acb->ret = bs->drv->bdrv_write(bs, sector_num, acb->bounce, nb_sectors);
4438 } else {
4439 acb->ret = bs->drv->bdrv_read(bs, sector_num, acb->bounce, nb_sectors);
4442 qemu_bh_schedule(acb->bh);
4444 return &acb->common;
4447 static BlockDriverAIOCB *bdrv_aio_readv_em(BlockDriverState *bs,
4448 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
4449 BlockDriverCompletionFunc *cb, void *opaque)
4451 return bdrv_aio_rw_vector(bs, sector_num, qiov, nb_sectors, cb, opaque, 0);
4454 static BlockDriverAIOCB *bdrv_aio_writev_em(BlockDriverState *bs,
4455 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
4456 BlockDriverCompletionFunc *cb, void *opaque)
4458 return bdrv_aio_rw_vector(bs, sector_num, qiov, nb_sectors, cb, opaque, 1);
4462 typedef struct BlockDriverAIOCBCoroutine {
4463 BlockDriverAIOCB common;
4464 BlockRequest req;
4465 bool is_write;
4466 bool *done;
4467 QEMUBH* bh;
4468 } BlockDriverAIOCBCoroutine;
4470 static void bdrv_aio_co_cancel_em(BlockDriverAIOCB *blockacb)
4472 BlockDriverAIOCBCoroutine *acb =
4473 container_of(blockacb, BlockDriverAIOCBCoroutine, common);
4474 bool done = false;
4476 acb->done = &done;
4477 while (!done) {
4478 qemu_aio_wait();
4482 static const AIOCBInfo bdrv_em_co_aiocb_info = {
4483 .aiocb_size = sizeof(BlockDriverAIOCBCoroutine),
4484 .cancel = bdrv_aio_co_cancel_em,
4487 static void bdrv_co_em_bh(void *opaque)
4489 BlockDriverAIOCBCoroutine *acb = opaque;
4491 acb->common.cb(acb->common.opaque, acb->req.error);
4493 if (acb->done) {
4494 *acb->done = true;
4497 qemu_bh_delete(acb->bh);
4498 qemu_aio_release(acb);
4501 /* Invoke bdrv_co_do_readv/bdrv_co_do_writev */
4502 static void coroutine_fn bdrv_co_do_rw(void *opaque)
4504 BlockDriverAIOCBCoroutine *acb = opaque;
4505 BlockDriverState *bs = acb->common.bs;
4507 if (!acb->is_write) {
4508 acb->req.error = bdrv_co_do_readv(bs, acb->req.sector,
4509 acb->req.nb_sectors, acb->req.qiov, acb->req.flags);
4510 } else {
4511 acb->req.error = bdrv_co_do_writev(bs, acb->req.sector,
4512 acb->req.nb_sectors, acb->req.qiov, acb->req.flags);
4515 acb->bh = qemu_bh_new(bdrv_co_em_bh, acb);
4516 qemu_bh_schedule(acb->bh);
4519 static BlockDriverAIOCB *bdrv_co_aio_rw_vector(BlockDriverState *bs,
4520 int64_t sector_num,
4521 QEMUIOVector *qiov,
4522 int nb_sectors,
4523 BdrvRequestFlags flags,
4524 BlockDriverCompletionFunc *cb,
4525 void *opaque,
4526 bool is_write)
4528 Coroutine *co;
4529 BlockDriverAIOCBCoroutine *acb;
4531 acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque);
4532 acb->req.sector = sector_num;
4533 acb->req.nb_sectors = nb_sectors;
4534 acb->req.qiov = qiov;
4535 acb->req.flags = flags;
4536 acb->is_write = is_write;
4537 acb->done = NULL;
4539 co = qemu_coroutine_create(bdrv_co_do_rw);
4540 qemu_coroutine_enter(co, acb);
4542 return &acb->common;
4545 static void coroutine_fn bdrv_aio_flush_co_entry(void *opaque)
4547 BlockDriverAIOCBCoroutine *acb = opaque;
4548 BlockDriverState *bs = acb->common.bs;
4550 acb->req.error = bdrv_co_flush(bs);
4551 acb->bh = qemu_bh_new(bdrv_co_em_bh, acb);
4552 qemu_bh_schedule(acb->bh);
4555 BlockDriverAIOCB *bdrv_aio_flush(BlockDriverState *bs,
4556 BlockDriverCompletionFunc *cb, void *opaque)
4558 trace_bdrv_aio_flush(bs, opaque);
4560 Coroutine *co;
4561 BlockDriverAIOCBCoroutine *acb;
4563 acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque);
4564 acb->done = NULL;
4566 co = qemu_coroutine_create(bdrv_aio_flush_co_entry);
4567 qemu_coroutine_enter(co, acb);
4569 return &acb->common;
4572 static void coroutine_fn bdrv_aio_discard_co_entry(void *opaque)
4574 BlockDriverAIOCBCoroutine *acb = opaque;
4575 BlockDriverState *bs = acb->common.bs;
4577 acb->req.error = bdrv_co_discard(bs, acb->req.sector, acb->req.nb_sectors);
4578 acb->bh = qemu_bh_new(bdrv_co_em_bh, acb);
4579 qemu_bh_schedule(acb->bh);
4582 BlockDriverAIOCB *bdrv_aio_discard(BlockDriverState *bs,
4583 int64_t sector_num, int nb_sectors,
4584 BlockDriverCompletionFunc *cb, void *opaque)
4586 Coroutine *co;
4587 BlockDriverAIOCBCoroutine *acb;
4589 trace_bdrv_aio_discard(bs, sector_num, nb_sectors, opaque);
4591 acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque);
4592 acb->req.sector = sector_num;
4593 acb->req.nb_sectors = nb_sectors;
4594 acb->done = NULL;
4595 co = qemu_coroutine_create(bdrv_aio_discard_co_entry);
4596 qemu_coroutine_enter(co, acb);
4598 return &acb->common;
4601 void bdrv_init(void)
4603 module_call_init(MODULE_INIT_BLOCK);
4606 void bdrv_init_with_whitelist(void)
4608 use_bdrv_whitelist = 1;
4609 bdrv_init();
4612 void *qemu_aio_get(const AIOCBInfo *aiocb_info, BlockDriverState *bs,
4613 BlockDriverCompletionFunc *cb, void *opaque)
4615 BlockDriverAIOCB *acb;
4617 acb = g_slice_alloc(aiocb_info->aiocb_size);
4618 acb->aiocb_info = aiocb_info;
4619 acb->bs = bs;
4620 acb->cb = cb;
4621 acb->opaque = opaque;
4622 return acb;
4625 void qemu_aio_release(void *p)
4627 BlockDriverAIOCB *acb = p;
4628 g_slice_free1(acb->aiocb_info->aiocb_size, acb);
4631 /**************************************************************/
4632 /* Coroutine block device emulation */
4634 typedef struct CoroutineIOCompletion {
4635 Coroutine *coroutine;
4636 int ret;
4637 } CoroutineIOCompletion;
4639 static void bdrv_co_io_em_complete(void *opaque, int ret)
4641 CoroutineIOCompletion *co = opaque;
4643 co->ret = ret;
4644 qemu_coroutine_enter(co->coroutine, NULL);
4647 static int coroutine_fn bdrv_co_io_em(BlockDriverState *bs, int64_t sector_num,
4648 int nb_sectors, QEMUIOVector *iov,
4649 bool is_write)
4651 CoroutineIOCompletion co = {
4652 .coroutine = qemu_coroutine_self(),
4654 BlockDriverAIOCB *acb;
4656 if (is_write) {
4657 acb = bs->drv->bdrv_aio_writev(bs, sector_num, iov, nb_sectors,
4658 bdrv_co_io_em_complete, &co);
4659 } else {
4660 acb = bs->drv->bdrv_aio_readv(bs, sector_num, iov, nb_sectors,
4661 bdrv_co_io_em_complete, &co);
4664 trace_bdrv_co_io_em(bs, sector_num, nb_sectors, is_write, acb);
4665 if (!acb) {
4666 return -EIO;
4668 qemu_coroutine_yield();
4670 return co.ret;
4673 static int coroutine_fn bdrv_co_readv_em(BlockDriverState *bs,
4674 int64_t sector_num, int nb_sectors,
4675 QEMUIOVector *iov)
4677 return bdrv_co_io_em(bs, sector_num, nb_sectors, iov, false);
4680 static int coroutine_fn bdrv_co_writev_em(BlockDriverState *bs,
4681 int64_t sector_num, int nb_sectors,
4682 QEMUIOVector *iov)
4684 return bdrv_co_io_em(bs, sector_num, nb_sectors, iov, true);
4687 static void coroutine_fn bdrv_flush_co_entry(void *opaque)
4689 RwCo *rwco = opaque;
4691 rwco->ret = bdrv_co_flush(rwco->bs);
4694 int coroutine_fn bdrv_co_flush(BlockDriverState *bs)
4696 int ret;
4698 if (!bs || !bdrv_is_inserted(bs) || bdrv_is_read_only(bs)) {
4699 return 0;
4702 /* Write back cached data to the OS even with cache=unsafe */
4703 BLKDBG_EVENT(bs->file, BLKDBG_FLUSH_TO_OS);
4704 if (bs->drv->bdrv_co_flush_to_os) {
4705 ret = bs->drv->bdrv_co_flush_to_os(bs);
4706 if (ret < 0) {
4707 return ret;
4711 /* But don't actually force it to the disk with cache=unsafe */
4712 if (bs->open_flags & BDRV_O_NO_FLUSH) {
4713 goto flush_parent;
4716 BLKDBG_EVENT(bs->file, BLKDBG_FLUSH_TO_DISK);
4717 if (bs->drv->bdrv_co_flush_to_disk) {
4718 ret = bs->drv->bdrv_co_flush_to_disk(bs);
4719 } else if (bs->drv->bdrv_aio_flush) {
4720 BlockDriverAIOCB *acb;
4721 CoroutineIOCompletion co = {
4722 .coroutine = qemu_coroutine_self(),
4725 acb = bs->drv->bdrv_aio_flush(bs, bdrv_co_io_em_complete, &co);
4726 if (acb == NULL) {
4727 ret = -EIO;
4728 } else {
4729 qemu_coroutine_yield();
4730 ret = co.ret;
4732 } else {
4734 * Some block drivers always operate in either writethrough or unsafe
4735 * mode and don't support bdrv_flush therefore. Usually qemu doesn't
4736 * know how the server works (because the behaviour is hardcoded or
4737 * depends on server-side configuration), so we can't ensure that
4738 * everything is safe on disk. Returning an error doesn't work because
4739 * that would break guests even if the server operates in writethrough
4740 * mode.
4742 * Let's hope the user knows what he's doing.
4744 ret = 0;
4746 if (ret < 0) {
4747 return ret;
4750 /* Now flush the underlying protocol. It will also have BDRV_O_NO_FLUSH
4751 * in the case of cache=unsafe, so there are no useless flushes.
4753 flush_parent:
4754 return bdrv_co_flush(bs->file);
4757 void bdrv_invalidate_cache(BlockDriverState *bs)
4759 if (bs->drv && bs->drv->bdrv_invalidate_cache) {
4760 bs->drv->bdrv_invalidate_cache(bs);
4764 void bdrv_invalidate_cache_all(void)
4766 BlockDriverState *bs;
4768 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
4769 bdrv_invalidate_cache(bs);
4773 void bdrv_clear_incoming_migration_all(void)
4775 BlockDriverState *bs;
4777 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
4778 bs->open_flags = bs->open_flags & ~(BDRV_O_INCOMING);
4782 int bdrv_flush(BlockDriverState *bs)
4784 Coroutine *co;
4785 RwCo rwco = {
4786 .bs = bs,
4787 .ret = NOT_DONE,
4790 if (qemu_in_coroutine()) {
4791 /* Fast-path if already in coroutine context */
4792 bdrv_flush_co_entry(&rwco);
4793 } else {
4794 co = qemu_coroutine_create(bdrv_flush_co_entry);
4795 qemu_coroutine_enter(co, &rwco);
4796 while (rwco.ret == NOT_DONE) {
4797 qemu_aio_wait();
4801 return rwco.ret;
4804 typedef struct DiscardCo {
4805 BlockDriverState *bs;
4806 int64_t sector_num;
4807 int nb_sectors;
4808 int ret;
4809 } DiscardCo;
4810 static void coroutine_fn bdrv_discard_co_entry(void *opaque)
4812 DiscardCo *rwco = opaque;
4814 rwco->ret = bdrv_co_discard(rwco->bs, rwco->sector_num, rwco->nb_sectors);
4817 /* if no limit is specified in the BlockLimits use a default
4818 * of 32768 512-byte sectors (16 MiB) per request.
4820 #define MAX_DISCARD_DEFAULT 32768
4822 int coroutine_fn bdrv_co_discard(BlockDriverState *bs, int64_t sector_num,
4823 int nb_sectors)
4825 int max_discard;
4827 if (!bs->drv) {
4828 return -ENOMEDIUM;
4829 } else if (bdrv_check_request(bs, sector_num, nb_sectors)) {
4830 return -EIO;
4831 } else if (bs->read_only) {
4832 return -EROFS;
4835 bdrv_reset_dirty(bs, sector_num, nb_sectors);
4837 /* Do nothing if disabled. */
4838 if (!(bs->open_flags & BDRV_O_UNMAP)) {
4839 return 0;
4842 if (!bs->drv->bdrv_co_discard && !bs->drv->bdrv_aio_discard) {
4843 return 0;
4846 max_discard = bs->bl.max_discard ? bs->bl.max_discard : MAX_DISCARD_DEFAULT;
4847 while (nb_sectors > 0) {
4848 int ret;
4849 int num = nb_sectors;
4851 /* align request */
4852 if (bs->bl.discard_alignment &&
4853 num >= bs->bl.discard_alignment &&
4854 sector_num % bs->bl.discard_alignment) {
4855 if (num > bs->bl.discard_alignment) {
4856 num = bs->bl.discard_alignment;
4858 num -= sector_num % bs->bl.discard_alignment;
4861 /* limit request size */
4862 if (num > max_discard) {
4863 num = max_discard;
4866 if (bs->drv->bdrv_co_discard) {
4867 ret = bs->drv->bdrv_co_discard(bs, sector_num, num);
4868 } else {
4869 BlockDriverAIOCB *acb;
4870 CoroutineIOCompletion co = {
4871 .coroutine = qemu_coroutine_self(),
4874 acb = bs->drv->bdrv_aio_discard(bs, sector_num, nb_sectors,
4875 bdrv_co_io_em_complete, &co);
4876 if (acb == NULL) {
4877 return -EIO;
4878 } else {
4879 qemu_coroutine_yield();
4880 ret = co.ret;
4883 if (ret && ret != -ENOTSUP) {
4884 return ret;
4887 sector_num += num;
4888 nb_sectors -= num;
4890 return 0;
4893 int bdrv_discard(BlockDriverState *bs, int64_t sector_num, int nb_sectors)
4895 Coroutine *co;
4896 DiscardCo rwco = {
4897 .bs = bs,
4898 .sector_num = sector_num,
4899 .nb_sectors = nb_sectors,
4900 .ret = NOT_DONE,
4903 if (qemu_in_coroutine()) {
4904 /* Fast-path if already in coroutine context */
4905 bdrv_discard_co_entry(&rwco);
4906 } else {
4907 co = qemu_coroutine_create(bdrv_discard_co_entry);
4908 qemu_coroutine_enter(co, &rwco);
4909 while (rwco.ret == NOT_DONE) {
4910 qemu_aio_wait();
4914 return rwco.ret;
4917 /**************************************************************/
4918 /* removable device support */
4921 * Return TRUE if the media is present
4923 int bdrv_is_inserted(BlockDriverState *bs)
4925 BlockDriver *drv = bs->drv;
4927 if (!drv)
4928 return 0;
4929 if (!drv->bdrv_is_inserted)
4930 return 1;
4931 return drv->bdrv_is_inserted(bs);
4935 * Return whether the media changed since the last call to this
4936 * function, or -ENOTSUP if we don't know. Most drivers don't know.
4938 int bdrv_media_changed(BlockDriverState *bs)
4940 BlockDriver *drv = bs->drv;
4942 if (drv && drv->bdrv_media_changed) {
4943 return drv->bdrv_media_changed(bs);
4945 return -ENOTSUP;
4949 * If eject_flag is TRUE, eject the media. Otherwise, close the tray
4951 void bdrv_eject(BlockDriverState *bs, bool eject_flag)
4953 BlockDriver *drv = bs->drv;
4955 if (drv && drv->bdrv_eject) {
4956 drv->bdrv_eject(bs, eject_flag);
4959 if (bs->device_name[0] != '\0') {
4960 bdrv_emit_qmp_eject_event(bs, eject_flag);
4965 * Lock or unlock the media (if it is locked, the user won't be able
4966 * to eject it manually).
4968 void bdrv_lock_medium(BlockDriverState *bs, bool locked)
4970 BlockDriver *drv = bs->drv;
4972 trace_bdrv_lock_medium(bs, locked);
4974 if (drv && drv->bdrv_lock_medium) {
4975 drv->bdrv_lock_medium(bs, locked);
4979 /* needed for generic scsi interface */
4981 int bdrv_ioctl(BlockDriverState *bs, unsigned long int req, void *buf)
4983 BlockDriver *drv = bs->drv;
4985 if (drv && drv->bdrv_ioctl)
4986 return drv->bdrv_ioctl(bs, req, buf);
4987 return -ENOTSUP;
4990 BlockDriverAIOCB *bdrv_aio_ioctl(BlockDriverState *bs,
4991 unsigned long int req, void *buf,
4992 BlockDriverCompletionFunc *cb, void *opaque)
4994 BlockDriver *drv = bs->drv;
4996 if (drv && drv->bdrv_aio_ioctl)
4997 return drv->bdrv_aio_ioctl(bs, req, buf, cb, opaque);
4998 return NULL;
5001 void bdrv_set_guest_block_size(BlockDriverState *bs, int align)
5003 bs->guest_block_size = align;
5006 void *qemu_blockalign(BlockDriverState *bs, size_t size)
5008 return qemu_memalign(bdrv_opt_mem_align(bs), size);
5012 * Check if all memory in this vector is sector aligned.
5014 bool bdrv_qiov_is_aligned(BlockDriverState *bs, QEMUIOVector *qiov)
5016 int i;
5017 size_t alignment = bdrv_opt_mem_align(bs);
5019 for (i = 0; i < qiov->niov; i++) {
5020 if ((uintptr_t) qiov->iov[i].iov_base % alignment) {
5021 return false;
5023 if (qiov->iov[i].iov_len % alignment) {
5024 return false;
5028 return true;
5031 BdrvDirtyBitmap *bdrv_create_dirty_bitmap(BlockDriverState *bs, int granularity)
5033 int64_t bitmap_size;
5034 BdrvDirtyBitmap *bitmap;
5036 assert((granularity & (granularity - 1)) == 0);
5038 granularity >>= BDRV_SECTOR_BITS;
5039 assert(granularity);
5040 bitmap_size = (bdrv_getlength(bs) >> BDRV_SECTOR_BITS);
5041 bitmap = g_malloc0(sizeof(BdrvDirtyBitmap));
5042 bitmap->bitmap = hbitmap_alloc(bitmap_size, ffs(granularity) - 1);
5043 QLIST_INSERT_HEAD(&bs->dirty_bitmaps, bitmap, list);
5044 return bitmap;
5047 void bdrv_release_dirty_bitmap(BlockDriverState *bs, BdrvDirtyBitmap *bitmap)
5049 BdrvDirtyBitmap *bm, *next;
5050 QLIST_FOREACH_SAFE(bm, &bs->dirty_bitmaps, list, next) {
5051 if (bm == bitmap) {
5052 QLIST_REMOVE(bitmap, list);
5053 hbitmap_free(bitmap->bitmap);
5054 g_free(bitmap);
5055 return;
5060 BlockDirtyInfoList *bdrv_query_dirty_bitmaps(BlockDriverState *bs)
5062 BdrvDirtyBitmap *bm;
5063 BlockDirtyInfoList *list = NULL;
5064 BlockDirtyInfoList **plist = &list;
5066 QLIST_FOREACH(bm, &bs->dirty_bitmaps, list) {
5067 BlockDirtyInfo *info = g_malloc0(sizeof(BlockDirtyInfo));
5068 BlockDirtyInfoList *entry = g_malloc0(sizeof(BlockDirtyInfoList));
5069 info->count = bdrv_get_dirty_count(bs, bm);
5070 info->granularity =
5071 ((int64_t) BDRV_SECTOR_SIZE << hbitmap_granularity(bm->bitmap));
5072 entry->value = info;
5073 *plist = entry;
5074 plist = &entry->next;
5077 return list;
5080 int bdrv_get_dirty(BlockDriverState *bs, BdrvDirtyBitmap *bitmap, int64_t sector)
5082 if (bitmap) {
5083 return hbitmap_get(bitmap->bitmap, sector);
5084 } else {
5085 return 0;
5089 void bdrv_dirty_iter_init(BlockDriverState *bs,
5090 BdrvDirtyBitmap *bitmap, HBitmapIter *hbi)
5092 hbitmap_iter_init(hbi, bitmap->bitmap, 0);
5095 void bdrv_set_dirty(BlockDriverState *bs, int64_t cur_sector,
5096 int nr_sectors)
5098 BdrvDirtyBitmap *bitmap;
5099 QLIST_FOREACH(bitmap, &bs->dirty_bitmaps, list) {
5100 hbitmap_set(bitmap->bitmap, cur_sector, nr_sectors);
5104 void bdrv_reset_dirty(BlockDriverState *bs, int64_t cur_sector, int nr_sectors)
5106 BdrvDirtyBitmap *bitmap;
5107 QLIST_FOREACH(bitmap, &bs->dirty_bitmaps, list) {
5108 hbitmap_reset(bitmap->bitmap, cur_sector, nr_sectors);
5112 int64_t bdrv_get_dirty_count(BlockDriverState *bs, BdrvDirtyBitmap *bitmap)
5114 return hbitmap_count(bitmap->bitmap);
5117 /* Get a reference to bs */
5118 void bdrv_ref(BlockDriverState *bs)
5120 bs->refcnt++;
5123 /* Release a previously grabbed reference to bs.
5124 * If after releasing, reference count is zero, the BlockDriverState is
5125 * deleted. */
5126 void bdrv_unref(BlockDriverState *bs)
5128 assert(bs->refcnt > 0);
5129 if (--bs->refcnt == 0) {
5130 bdrv_delete(bs);
5134 void bdrv_set_in_use(BlockDriverState *bs, int in_use)
5136 assert(bs->in_use != in_use);
5137 bs->in_use = in_use;
5140 int bdrv_in_use(BlockDriverState *bs)
5142 return bs->in_use;
5145 void bdrv_iostatus_enable(BlockDriverState *bs)
5147 bs->iostatus_enabled = true;
5148 bs->iostatus = BLOCK_DEVICE_IO_STATUS_OK;
5151 /* The I/O status is only enabled if the drive explicitly
5152 * enables it _and_ the VM is configured to stop on errors */
5153 bool bdrv_iostatus_is_enabled(const BlockDriverState *bs)
5155 return (bs->iostatus_enabled &&
5156 (bs->on_write_error == BLOCKDEV_ON_ERROR_ENOSPC ||
5157 bs->on_write_error == BLOCKDEV_ON_ERROR_STOP ||
5158 bs->on_read_error == BLOCKDEV_ON_ERROR_STOP));
5161 void bdrv_iostatus_disable(BlockDriverState *bs)
5163 bs->iostatus_enabled = false;
5166 void bdrv_iostatus_reset(BlockDriverState *bs)
5168 if (bdrv_iostatus_is_enabled(bs)) {
5169 bs->iostatus = BLOCK_DEVICE_IO_STATUS_OK;
5170 if (bs->job) {
5171 block_job_iostatus_reset(bs->job);
5176 void bdrv_iostatus_set_err(BlockDriverState *bs, int error)
5178 assert(bdrv_iostatus_is_enabled(bs));
5179 if (bs->iostatus == BLOCK_DEVICE_IO_STATUS_OK) {
5180 bs->iostatus = error == ENOSPC ? BLOCK_DEVICE_IO_STATUS_NOSPACE :
5181 BLOCK_DEVICE_IO_STATUS_FAILED;
5185 void
5186 bdrv_acct_start(BlockDriverState *bs, BlockAcctCookie *cookie, int64_t bytes,
5187 enum BlockAcctType type)
5189 assert(type < BDRV_MAX_IOTYPE);
5191 cookie->bytes = bytes;
5192 cookie->start_time_ns = get_clock();
5193 cookie->type = type;
5196 void
5197 bdrv_acct_done(BlockDriverState *bs, BlockAcctCookie *cookie)
5199 assert(cookie->type < BDRV_MAX_IOTYPE);
5201 bs->nr_bytes[cookie->type] += cookie->bytes;
5202 bs->nr_ops[cookie->type]++;
5203 bs->total_time_ns[cookie->type] += get_clock() - cookie->start_time_ns;
5206 void bdrv_img_create(const char *filename, const char *fmt,
5207 const char *base_filename, const char *base_fmt,
5208 char *options, uint64_t img_size, int flags,
5209 Error **errp, bool quiet)
5211 QEMUOptionParameter *param = NULL, *create_options = NULL;
5212 QEMUOptionParameter *backing_fmt, *backing_file, *size;
5213 BlockDriver *drv, *proto_drv;
5214 BlockDriver *backing_drv = NULL;
5215 Error *local_err = NULL;
5216 int ret = 0;
5218 /* Find driver and parse its options */
5219 drv = bdrv_find_format(fmt);
5220 if (!drv) {
5221 error_setg(errp, "Unknown file format '%s'", fmt);
5222 return;
5225 proto_drv = bdrv_find_protocol(filename, true);
5226 if (!proto_drv) {
5227 error_setg(errp, "Unknown protocol '%s'", filename);
5228 return;
5231 create_options = append_option_parameters(create_options,
5232 drv->create_options);
5233 create_options = append_option_parameters(create_options,
5234 proto_drv->create_options);
5236 /* Create parameter list with default values */
5237 param = parse_option_parameters("", create_options, param);
5239 set_option_parameter_int(param, BLOCK_OPT_SIZE, img_size);
5241 /* Parse -o options */
5242 if (options) {
5243 param = parse_option_parameters(options, create_options, param);
5244 if (param == NULL) {
5245 error_setg(errp, "Invalid options for file format '%s'.", fmt);
5246 goto out;
5250 if (base_filename) {
5251 if (set_option_parameter(param, BLOCK_OPT_BACKING_FILE,
5252 base_filename)) {
5253 error_setg(errp, "Backing file not supported for file format '%s'",
5254 fmt);
5255 goto out;
5259 if (base_fmt) {
5260 if (set_option_parameter(param, BLOCK_OPT_BACKING_FMT, base_fmt)) {
5261 error_setg(errp, "Backing file format not supported for file "
5262 "format '%s'", fmt);
5263 goto out;
5267 backing_file = get_option_parameter(param, BLOCK_OPT_BACKING_FILE);
5268 if (backing_file && backing_file->value.s) {
5269 if (!strcmp(filename, backing_file->value.s)) {
5270 error_setg(errp, "Error: Trying to create an image with the "
5271 "same filename as the backing file");
5272 goto out;
5276 backing_fmt = get_option_parameter(param, BLOCK_OPT_BACKING_FMT);
5277 if (backing_fmt && backing_fmt->value.s) {
5278 backing_drv = bdrv_find_format(backing_fmt->value.s);
5279 if (!backing_drv) {
5280 error_setg(errp, "Unknown backing file format '%s'",
5281 backing_fmt->value.s);
5282 goto out;
5286 // The size for the image must always be specified, with one exception:
5287 // If we are using a backing file, we can obtain the size from there
5288 size = get_option_parameter(param, BLOCK_OPT_SIZE);
5289 if (size && size->value.n == -1) {
5290 if (backing_file && backing_file->value.s) {
5291 BlockDriverState *bs;
5292 uint64_t size;
5293 char buf[32];
5294 int back_flags;
5296 /* backing files always opened read-only */
5297 back_flags =
5298 flags & ~(BDRV_O_RDWR | BDRV_O_SNAPSHOT | BDRV_O_NO_BACKING);
5300 bs = NULL;
5301 ret = bdrv_open(&bs, backing_file->value.s, NULL, NULL, back_flags,
5302 backing_drv, &local_err);
5303 if (ret < 0) {
5304 error_setg_errno(errp, -ret, "Could not open '%s': %s",
5305 backing_file->value.s,
5306 error_get_pretty(local_err));
5307 error_free(local_err);
5308 local_err = NULL;
5309 goto out;
5311 bdrv_get_geometry(bs, &size);
5312 size *= 512;
5314 snprintf(buf, sizeof(buf), "%" PRId64, size);
5315 set_option_parameter(param, BLOCK_OPT_SIZE, buf);
5317 bdrv_unref(bs);
5318 } else {
5319 error_setg(errp, "Image creation needs a size parameter");
5320 goto out;
5324 if (!quiet) {
5325 printf("Formatting '%s', fmt=%s ", filename, fmt);
5326 print_option_parameters(param);
5327 puts("");
5329 ret = bdrv_create(drv, filename, param, &local_err);
5330 if (ret == -EFBIG) {
5331 /* This is generally a better message than whatever the driver would
5332 * deliver (especially because of the cluster_size_hint), since that
5333 * is most probably not much different from "image too large". */
5334 const char *cluster_size_hint = "";
5335 if (get_option_parameter(create_options, BLOCK_OPT_CLUSTER_SIZE)) {
5336 cluster_size_hint = " (try using a larger cluster size)";
5338 error_setg(errp, "The image size is too large for file format '%s'"
5339 "%s", fmt, cluster_size_hint);
5340 error_free(local_err);
5341 local_err = NULL;
5344 out:
5345 free_option_parameters(create_options);
5346 free_option_parameters(param);
5348 if (local_err) {
5349 error_propagate(errp, local_err);
5353 AioContext *bdrv_get_aio_context(BlockDriverState *bs)
5355 /* Currently BlockDriverState always uses the main loop AioContext */
5356 return qemu_get_aio_context();
5359 void bdrv_add_before_write_notifier(BlockDriverState *bs,
5360 NotifierWithReturn *notifier)
5362 notifier_with_return_list_add(&bs->before_write_notifiers, notifier);
5365 int bdrv_amend_options(BlockDriverState *bs, QEMUOptionParameter *options)
5367 if (bs->drv->bdrv_amend_options == NULL) {
5368 return -ENOTSUP;
5370 return bs->drv->bdrv_amend_options(bs, options);
5373 /* Used to recurse on single child block filters.
5374 * Single child block filter will store their child in bs->file.
5376 bool bdrv_generic_is_first_non_filter(BlockDriverState *bs,
5377 BlockDriverState *candidate)
5379 if (!bs->drv) {
5380 return false;
5383 if (!bs->drv->authorizations[BS_IS_A_FILTER]) {
5384 if (bs == candidate) {
5385 return true;
5386 } else {
5387 return false;
5391 if (!bs->drv->authorizations[BS_FILTER_PASS_DOWN]) {
5392 return false;
5395 if (!bs->file) {
5396 return false;
5399 return bdrv_recurse_is_first_non_filter(bs->file, candidate);
5402 bool bdrv_recurse_is_first_non_filter(BlockDriverState *bs,
5403 BlockDriverState *candidate)
5405 if (bs->drv && bs->drv->bdrv_recurse_is_first_non_filter) {
5406 return bs->drv->bdrv_recurse_is_first_non_filter(bs, candidate);
5409 return bdrv_generic_is_first_non_filter(bs, candidate);
5412 /* This function checks if the candidate is the first non filter bs down it's
5413 * bs chain. Since we don't have pointers to parents it explore all bs chains
5414 * from the top. Some filters can choose not to pass down the recursion.
5416 bool bdrv_is_first_non_filter(BlockDriverState *candidate)
5418 BlockDriverState *bs;
5420 /* walk down the bs forest recursively */
5421 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
5422 bool perm;
5424 perm = bdrv_recurse_is_first_non_filter(bs, candidate);
5426 /* candidate is the first non filter */
5427 if (perm) {
5428 return true;
5432 return false;