kvm_arch_get_registers() shouldn't be called directly
[qemu.git] / hw / pc.c
blobd96d75659282460f704a1d16203baf5e67716ae3
1 /*
2 * QEMU PC System Emulator
4 * Copyright (c) 2003-2004 Fabrice Bellard
6 * Permission is hereby granted, free of charge, to any person obtaining a copy
7 * of this software and associated documentation files (the "Software"), to deal
8 * in the Software without restriction, including without limitation the rights
9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10 * copies of the Software, and to permit persons to whom the Software is
11 * furnished to do so, subject to the following conditions:
13 * The above copyright notice and this permission notice shall be included in
14 * all copies or substantial portions of the Software.
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
22 * THE SOFTWARE.
24 #include "hw.h"
25 #include "pc.h"
26 #include "fdc.h"
27 #include "pci.h"
28 #include "block.h"
29 #include "sysemu.h"
30 #include "audio/audio.h"
31 #include "net.h"
32 #include "smbus.h"
33 #include "boards.h"
34 #include "monitor.h"
35 #include "fw_cfg.h"
36 #include "hpet_emul.h"
37 #include "watchdog.h"
38 #include "smbios.h"
39 #include "ide.h"
41 /* output Bochs bios info messages */
42 //#define DEBUG_BIOS
44 /* Show multiboot debug output */
45 //#define DEBUG_MULTIBOOT
47 #define BIOS_FILENAME "bios.bin"
48 #define VGABIOS_FILENAME "vgabios.bin"
49 #define VGABIOS_CIRRUS_FILENAME "vgabios-cirrus.bin"
51 #define PC_MAX_BIOS_SIZE (4 * 1024 * 1024)
53 /* Leave a chunk of memory at the top of RAM for the BIOS ACPI tables. */
54 #define ACPI_DATA_SIZE 0x10000
55 #define BIOS_CFG_IOPORT 0x510
56 #define FW_CFG_ACPI_TABLES (FW_CFG_ARCH_LOCAL + 0)
57 #define FW_CFG_SMBIOS_ENTRIES (FW_CFG_ARCH_LOCAL + 1)
58 #define FW_CFG_IRQ0_OVERRIDE (FW_CFG_ARCH_LOCAL + 2)
60 #define MAX_IDE_BUS 2
62 static fdctrl_t *floppy_controller;
63 static RTCState *rtc_state;
64 static PITState *pit;
65 static PCII440FXState *i440fx_state;
67 typedef struct rom_reset_data {
68 uint8_t *data;
69 target_phys_addr_t addr;
70 unsigned size;
71 } RomResetData;
73 static void option_rom_reset(void *_rrd)
75 RomResetData *rrd = _rrd;
77 cpu_physical_memory_write_rom(rrd->addr, rrd->data, rrd->size);
80 static void option_rom_setup_reset(target_phys_addr_t addr, unsigned size)
82 RomResetData *rrd = qemu_malloc(sizeof *rrd);
84 rrd->data = qemu_malloc(size);
85 cpu_physical_memory_read(addr, rrd->data, size);
86 rrd->addr = addr;
87 rrd->size = size;
88 qemu_register_reset(option_rom_reset, rrd);
91 typedef struct isa_irq_state {
92 qemu_irq *i8259;
93 qemu_irq *ioapic;
94 } IsaIrqState;
96 static void isa_irq_handler(void *opaque, int n, int level)
98 IsaIrqState *isa = (IsaIrqState *)opaque;
100 if (n < 16) {
101 qemu_set_irq(isa->i8259[n], level);
103 if (isa->ioapic)
104 qemu_set_irq(isa->ioapic[n], level);
107 static void ioport80_write(void *opaque, uint32_t addr, uint32_t data)
111 /* MSDOS compatibility mode FPU exception support */
112 static qemu_irq ferr_irq;
113 /* XXX: add IGNNE support */
114 void cpu_set_ferr(CPUX86State *s)
116 qemu_irq_raise(ferr_irq);
119 static void ioportF0_write(void *opaque, uint32_t addr, uint32_t data)
121 qemu_irq_lower(ferr_irq);
124 /* TSC handling */
125 uint64_t cpu_get_tsc(CPUX86State *env)
127 return cpu_get_ticks();
130 /* SMM support */
131 void cpu_smm_update(CPUState *env)
133 if (i440fx_state && env == first_cpu)
134 i440fx_set_smm(i440fx_state, (env->hflags >> HF_SMM_SHIFT) & 1);
138 /* IRQ handling */
139 int cpu_get_pic_interrupt(CPUState *env)
141 int intno;
143 intno = apic_get_interrupt(env);
144 if (intno >= 0) {
145 /* set irq request if a PIC irq is still pending */
146 /* XXX: improve that */
147 pic_update_irq(isa_pic);
148 return intno;
150 /* read the irq from the PIC */
151 if (!apic_accept_pic_intr(env))
152 return -1;
154 intno = pic_read_irq(isa_pic);
155 return intno;
158 static void pic_irq_request(void *opaque, int irq, int level)
160 CPUState *env = first_cpu;
162 if (env->apic_state) {
163 while (env) {
164 if (apic_accept_pic_intr(env))
165 apic_deliver_pic_intr(env, level);
166 env = env->next_cpu;
168 } else {
169 if (level)
170 cpu_interrupt(env, CPU_INTERRUPT_HARD);
171 else
172 cpu_reset_interrupt(env, CPU_INTERRUPT_HARD);
176 /* PC cmos mappings */
178 #define REG_EQUIPMENT_BYTE 0x14
180 static int cmos_get_fd_drive_type(int fd0)
182 int val;
184 switch (fd0) {
185 case 0:
186 /* 1.44 Mb 3"5 drive */
187 val = 4;
188 break;
189 case 1:
190 /* 2.88 Mb 3"5 drive */
191 val = 5;
192 break;
193 case 2:
194 /* 1.2 Mb 5"5 drive */
195 val = 2;
196 break;
197 default:
198 val = 0;
199 break;
201 return val;
204 static void cmos_init_hd(int type_ofs, int info_ofs, BlockDriverState *hd)
206 RTCState *s = rtc_state;
207 int cylinders, heads, sectors;
208 bdrv_get_geometry_hint(hd, &cylinders, &heads, &sectors);
209 rtc_set_memory(s, type_ofs, 47);
210 rtc_set_memory(s, info_ofs, cylinders);
211 rtc_set_memory(s, info_ofs + 1, cylinders >> 8);
212 rtc_set_memory(s, info_ofs + 2, heads);
213 rtc_set_memory(s, info_ofs + 3, 0xff);
214 rtc_set_memory(s, info_ofs + 4, 0xff);
215 rtc_set_memory(s, info_ofs + 5, 0xc0 | ((heads > 8) << 3));
216 rtc_set_memory(s, info_ofs + 6, cylinders);
217 rtc_set_memory(s, info_ofs + 7, cylinders >> 8);
218 rtc_set_memory(s, info_ofs + 8, sectors);
221 /* convert boot_device letter to something recognizable by the bios */
222 static int boot_device2nibble(char boot_device)
224 switch(boot_device) {
225 case 'a':
226 case 'b':
227 return 0x01; /* floppy boot */
228 case 'c':
229 return 0x02; /* hard drive boot */
230 case 'd':
231 return 0x03; /* CD-ROM boot */
232 case 'n':
233 return 0x04; /* Network boot */
235 return 0;
238 /* copy/pasted from cmos_init, should be made a general function
239 and used there as well */
240 static int pc_boot_set(void *opaque, const char *boot_device)
242 Monitor *mon = cur_mon;
243 #define PC_MAX_BOOT_DEVICES 3
244 RTCState *s = (RTCState *)opaque;
245 int nbds, bds[3] = { 0, };
246 int i;
248 nbds = strlen(boot_device);
249 if (nbds > PC_MAX_BOOT_DEVICES) {
250 monitor_printf(mon, "Too many boot devices for PC\n");
251 return(1);
253 for (i = 0; i < nbds; i++) {
254 bds[i] = boot_device2nibble(boot_device[i]);
255 if (bds[i] == 0) {
256 monitor_printf(mon, "Invalid boot device for PC: '%c'\n",
257 boot_device[i]);
258 return(1);
261 rtc_set_memory(s, 0x3d, (bds[1] << 4) | bds[0]);
262 rtc_set_memory(s, 0x38, (bds[2] << 4));
263 return(0);
266 /* hd_table must contain 4 block drivers */
267 static void cmos_init(ram_addr_t ram_size, ram_addr_t above_4g_mem_size,
268 const char *boot_device, DriveInfo **hd_table)
270 RTCState *s = rtc_state;
271 int nbds, bds[3] = { 0, };
272 int val;
273 int fd0, fd1, nb;
274 int i;
276 /* various important CMOS locations needed by PC/Bochs bios */
278 /* memory size */
279 val = 640; /* base memory in K */
280 rtc_set_memory(s, 0x15, val);
281 rtc_set_memory(s, 0x16, val >> 8);
283 val = (ram_size / 1024) - 1024;
284 if (val > 65535)
285 val = 65535;
286 rtc_set_memory(s, 0x17, val);
287 rtc_set_memory(s, 0x18, val >> 8);
288 rtc_set_memory(s, 0x30, val);
289 rtc_set_memory(s, 0x31, val >> 8);
291 if (above_4g_mem_size) {
292 rtc_set_memory(s, 0x5b, (unsigned int)above_4g_mem_size >> 16);
293 rtc_set_memory(s, 0x5c, (unsigned int)above_4g_mem_size >> 24);
294 rtc_set_memory(s, 0x5d, (uint64_t)above_4g_mem_size >> 32);
297 if (ram_size > (16 * 1024 * 1024))
298 val = (ram_size / 65536) - ((16 * 1024 * 1024) / 65536);
299 else
300 val = 0;
301 if (val > 65535)
302 val = 65535;
303 rtc_set_memory(s, 0x34, val);
304 rtc_set_memory(s, 0x35, val >> 8);
306 /* set the number of CPU */
307 rtc_set_memory(s, 0x5f, smp_cpus - 1);
309 /* set boot devices, and disable floppy signature check if requested */
310 #define PC_MAX_BOOT_DEVICES 3
311 nbds = strlen(boot_device);
312 if (nbds > PC_MAX_BOOT_DEVICES) {
313 fprintf(stderr, "Too many boot devices for PC\n");
314 exit(1);
316 for (i = 0; i < nbds; i++) {
317 bds[i] = boot_device2nibble(boot_device[i]);
318 if (bds[i] == 0) {
319 fprintf(stderr, "Invalid boot device for PC: '%c'\n",
320 boot_device[i]);
321 exit(1);
324 rtc_set_memory(s, 0x3d, (bds[1] << 4) | bds[0]);
325 rtc_set_memory(s, 0x38, (bds[2] << 4) | (fd_bootchk ? 0x0 : 0x1));
327 /* floppy type */
329 fd0 = fdctrl_get_drive_type(floppy_controller, 0);
330 fd1 = fdctrl_get_drive_type(floppy_controller, 1);
332 val = (cmos_get_fd_drive_type(fd0) << 4) | cmos_get_fd_drive_type(fd1);
333 rtc_set_memory(s, 0x10, val);
335 val = 0;
336 nb = 0;
337 if (fd0 < 3)
338 nb++;
339 if (fd1 < 3)
340 nb++;
341 switch (nb) {
342 case 0:
343 break;
344 case 1:
345 val |= 0x01; /* 1 drive, ready for boot */
346 break;
347 case 2:
348 val |= 0x41; /* 2 drives, ready for boot */
349 break;
351 val |= 0x02; /* FPU is there */
352 val |= 0x04; /* PS/2 mouse installed */
353 rtc_set_memory(s, REG_EQUIPMENT_BYTE, val);
355 /* hard drives */
357 rtc_set_memory(s, 0x12, (hd_table[0] ? 0xf0 : 0) | (hd_table[1] ? 0x0f : 0));
358 if (hd_table[0])
359 cmos_init_hd(0x19, 0x1b, hd_table[0]->bdrv);
360 if (hd_table[1])
361 cmos_init_hd(0x1a, 0x24, hd_table[1]->bdrv);
363 val = 0;
364 for (i = 0; i < 4; i++) {
365 if (hd_table[i]) {
366 int cylinders, heads, sectors, translation;
367 /* NOTE: bdrv_get_geometry_hint() returns the physical
368 geometry. It is always such that: 1 <= sects <= 63, 1
369 <= heads <= 16, 1 <= cylinders <= 16383. The BIOS
370 geometry can be different if a translation is done. */
371 translation = bdrv_get_translation_hint(hd_table[i]->bdrv);
372 if (translation == BIOS_ATA_TRANSLATION_AUTO) {
373 bdrv_get_geometry_hint(hd_table[i]->bdrv, &cylinders, &heads, &sectors);
374 if (cylinders <= 1024 && heads <= 16 && sectors <= 63) {
375 /* No translation. */
376 translation = 0;
377 } else {
378 /* LBA translation. */
379 translation = 1;
381 } else {
382 translation--;
384 val |= translation << (i * 2);
387 rtc_set_memory(s, 0x39, val);
390 void ioport_set_a20(int enable)
392 /* XXX: send to all CPUs ? */
393 cpu_x86_set_a20(first_cpu, enable);
396 int ioport_get_a20(void)
398 return ((first_cpu->a20_mask >> 20) & 1);
401 static void ioport92_write(void *opaque, uint32_t addr, uint32_t val)
403 ioport_set_a20((val >> 1) & 1);
404 /* XXX: bit 0 is fast reset */
407 static uint32_t ioport92_read(void *opaque, uint32_t addr)
409 return ioport_get_a20() << 1;
412 /***********************************************************/
413 /* Bochs BIOS debug ports */
415 static void bochs_bios_write(void *opaque, uint32_t addr, uint32_t val)
417 static const char shutdown_str[8] = "Shutdown";
418 static int shutdown_index = 0;
420 switch(addr) {
421 /* Bochs BIOS messages */
422 case 0x400:
423 case 0x401:
424 fprintf(stderr, "BIOS panic at rombios.c, line %d\n", val);
425 exit(1);
426 case 0x402:
427 case 0x403:
428 #ifdef DEBUG_BIOS
429 fprintf(stderr, "%c", val);
430 #endif
431 break;
432 case 0x8900:
433 /* same as Bochs power off */
434 if (val == shutdown_str[shutdown_index]) {
435 shutdown_index++;
436 if (shutdown_index == 8) {
437 shutdown_index = 0;
438 qemu_system_shutdown_request();
440 } else {
441 shutdown_index = 0;
443 break;
445 /* LGPL'ed VGA BIOS messages */
446 case 0x501:
447 case 0x502:
448 fprintf(stderr, "VGA BIOS panic, line %d\n", val);
449 exit(1);
450 case 0x500:
451 case 0x503:
452 #ifdef DEBUG_BIOS
453 fprintf(stderr, "%c", val);
454 #endif
455 break;
459 extern uint64_t node_cpumask[MAX_NODES];
461 static void *bochs_bios_init(void)
463 void *fw_cfg;
464 uint8_t *smbios_table;
465 size_t smbios_len;
466 uint64_t *numa_fw_cfg;
467 int i, j;
469 register_ioport_write(0x400, 1, 2, bochs_bios_write, NULL);
470 register_ioport_write(0x401, 1, 2, bochs_bios_write, NULL);
471 register_ioport_write(0x402, 1, 1, bochs_bios_write, NULL);
472 register_ioport_write(0x403, 1, 1, bochs_bios_write, NULL);
473 register_ioport_write(0x8900, 1, 1, bochs_bios_write, NULL);
475 register_ioport_write(0x501, 1, 2, bochs_bios_write, NULL);
476 register_ioport_write(0x502, 1, 2, bochs_bios_write, NULL);
477 register_ioport_write(0x500, 1, 1, bochs_bios_write, NULL);
478 register_ioport_write(0x503, 1, 1, bochs_bios_write, NULL);
480 fw_cfg = fw_cfg_init(BIOS_CFG_IOPORT, BIOS_CFG_IOPORT + 1, 0, 0);
482 fw_cfg_add_i32(fw_cfg, FW_CFG_ID, 1);
483 fw_cfg_add_i64(fw_cfg, FW_CFG_RAM_SIZE, (uint64_t)ram_size);
484 fw_cfg_add_bytes(fw_cfg, FW_CFG_ACPI_TABLES, (uint8_t *)acpi_tables,
485 acpi_tables_len);
486 fw_cfg_add_bytes(fw_cfg, FW_CFG_IRQ0_OVERRIDE, &irq0override, 1);
488 smbios_table = smbios_get_table(&smbios_len);
489 if (smbios_table)
490 fw_cfg_add_bytes(fw_cfg, FW_CFG_SMBIOS_ENTRIES,
491 smbios_table, smbios_len);
493 /* allocate memory for the NUMA channel: one (64bit) word for the number
494 * of nodes, one word for each VCPU->node and one word for each node to
495 * hold the amount of memory.
497 numa_fw_cfg = qemu_mallocz((1 + smp_cpus + nb_numa_nodes) * 8);
498 numa_fw_cfg[0] = cpu_to_le64(nb_numa_nodes);
499 for (i = 0; i < smp_cpus; i++) {
500 for (j = 0; j < nb_numa_nodes; j++) {
501 if (node_cpumask[j] & (1 << i)) {
502 numa_fw_cfg[i + 1] = cpu_to_le64(j);
503 break;
507 for (i = 0; i < nb_numa_nodes; i++) {
508 numa_fw_cfg[smp_cpus + 1 + i] = cpu_to_le64(node_mem[i]);
510 fw_cfg_add_bytes(fw_cfg, FW_CFG_NUMA, (uint8_t *)numa_fw_cfg,
511 (1 + smp_cpus + nb_numa_nodes) * 8);
513 return fw_cfg;
516 /* Generate an initial boot sector which sets state and jump to
517 a specified vector */
518 static void generate_bootsect(target_phys_addr_t option_rom,
519 uint32_t gpr[8], uint16_t segs[6], uint16_t ip)
521 uint8_t rom[512], *p, *reloc;
522 uint8_t sum;
523 int i;
525 memset(rom, 0, sizeof(rom));
527 p = rom;
528 /* Make sure we have an option rom signature */
529 *p++ = 0x55;
530 *p++ = 0xaa;
532 /* ROM size in sectors*/
533 *p++ = 1;
535 /* Hook int19 */
537 *p++ = 0x50; /* push ax */
538 *p++ = 0x1e; /* push ds */
539 *p++ = 0x31; *p++ = 0xc0; /* xor ax, ax */
540 *p++ = 0x8e; *p++ = 0xd8; /* mov ax, ds */
542 *p++ = 0xc7; *p++ = 0x06; /* movvw _start,0x64 */
543 *p++ = 0x64; *p++ = 0x00;
544 reloc = p;
545 *p++ = 0x00; *p++ = 0x00;
547 *p++ = 0x8c; *p++ = 0x0e; /* mov cs,0x66 */
548 *p++ = 0x66; *p++ = 0x00;
550 *p++ = 0x1f; /* pop ds */
551 *p++ = 0x58; /* pop ax */
552 *p++ = 0xcb; /* lret */
554 /* Actual code */
555 *reloc = (p - rom);
557 *p++ = 0xfa; /* CLI */
558 *p++ = 0xfc; /* CLD */
560 for (i = 0; i < 6; i++) {
561 if (i == 1) /* Skip CS */
562 continue;
564 *p++ = 0xb8; /* MOV AX,imm16 */
565 *p++ = segs[i];
566 *p++ = segs[i] >> 8;
567 *p++ = 0x8e; /* MOV <seg>,AX */
568 *p++ = 0xc0 + (i << 3);
571 for (i = 0; i < 8; i++) {
572 *p++ = 0x66; /* 32-bit operand size */
573 *p++ = 0xb8 + i; /* MOV <reg>,imm32 */
574 *p++ = gpr[i];
575 *p++ = gpr[i] >> 8;
576 *p++ = gpr[i] >> 16;
577 *p++ = gpr[i] >> 24;
580 *p++ = 0xea; /* JMP FAR */
581 *p++ = ip; /* IP */
582 *p++ = ip >> 8;
583 *p++ = segs[1]; /* CS */
584 *p++ = segs[1] >> 8;
586 /* sign rom */
587 sum = 0;
588 for (i = 0; i < (sizeof(rom) - 1); i++)
589 sum += rom[i];
590 rom[sizeof(rom) - 1] = -sum;
592 cpu_physical_memory_write_rom(option_rom, rom, sizeof(rom));
593 option_rom_setup_reset(option_rom, sizeof (rom));
596 static long get_file_size(FILE *f)
598 long where, size;
600 /* XXX: on Unix systems, using fstat() probably makes more sense */
602 where = ftell(f);
603 fseek(f, 0, SEEK_END);
604 size = ftell(f);
605 fseek(f, where, SEEK_SET);
607 return size;
610 #define MULTIBOOT_STRUCT_ADDR 0x9000
612 #if MULTIBOOT_STRUCT_ADDR > 0xf0000
613 #error multiboot struct needs to fit in 16 bit real mode
614 #endif
616 static int load_multiboot(void *fw_cfg,
617 FILE *f,
618 const char *kernel_filename,
619 const char *initrd_filename,
620 const char *kernel_cmdline,
621 uint8_t *header)
623 int i, t, is_multiboot = 0;
624 uint32_t flags = 0;
625 uint32_t mh_entry_addr;
626 uint32_t mh_load_addr;
627 uint32_t mb_kernel_size;
628 uint32_t mmap_addr = MULTIBOOT_STRUCT_ADDR;
629 uint32_t mb_bootinfo = MULTIBOOT_STRUCT_ADDR + 0x500;
630 uint32_t mb_cmdline = mb_bootinfo + 0x200;
631 uint32_t mb_mod_end;
633 /* Ok, let's see if it is a multiboot image.
634 The header is 12x32bit long, so the latest entry may be 8192 - 48. */
635 for (i = 0; i < (8192 - 48); i += 4) {
636 if (ldl_p(header+i) == 0x1BADB002) {
637 uint32_t checksum = ldl_p(header+i+8);
638 flags = ldl_p(header+i+4);
639 checksum += flags;
640 checksum += (uint32_t)0x1BADB002;
641 if (!checksum) {
642 is_multiboot = 1;
643 break;
648 if (!is_multiboot)
649 return 0; /* no multiboot */
651 #ifdef DEBUG_MULTIBOOT
652 fprintf(stderr, "qemu: I believe we found a multiboot image!\n");
653 #endif
655 if (flags & 0x00000004) { /* MULTIBOOT_HEADER_HAS_VBE */
656 fprintf(stderr, "qemu: multiboot knows VBE. we don't.\n");
658 if (!(flags & 0x00010000)) { /* MULTIBOOT_HEADER_HAS_ADDR */
659 uint64_t elf_entry;
660 int kernel_size;
661 fclose(f);
662 kernel_size = load_elf(kernel_filename, 0, &elf_entry, NULL, NULL);
663 if (kernel_size < 0) {
664 fprintf(stderr, "Error while loading elf kernel\n");
665 exit(1);
667 mh_load_addr = mh_entry_addr = elf_entry;
668 mb_kernel_size = kernel_size;
670 #ifdef DEBUG_MULTIBOOT
671 fprintf(stderr, "qemu: loading multiboot-elf kernel (%#x bytes) with entry %#zx\n",
672 mb_kernel_size, (size_t)mh_entry_addr);
673 #endif
674 } else {
675 /* Valid if mh_flags sets MULTIBOOT_HEADER_HAS_ADDR. */
676 uint32_t mh_header_addr = ldl_p(header+i+12);
677 mh_load_addr = ldl_p(header+i+16);
678 #ifdef DEBUG_MULTIBOOT
679 uint32_t mh_load_end_addr = ldl_p(header+i+20);
680 uint32_t mh_bss_end_addr = ldl_p(header+i+24);
681 #endif
682 uint32_t mb_kernel_text_offset = i - (mh_header_addr - mh_load_addr);
684 mh_entry_addr = ldl_p(header+i+28);
685 mb_kernel_size = get_file_size(f) - mb_kernel_text_offset;
687 /* Valid if mh_flags sets MULTIBOOT_HEADER_HAS_VBE.
688 uint32_t mh_mode_type = ldl_p(header+i+32);
689 uint32_t mh_width = ldl_p(header+i+36);
690 uint32_t mh_height = ldl_p(header+i+40);
691 uint32_t mh_depth = ldl_p(header+i+44); */
693 #ifdef DEBUG_MULTIBOOT
694 fprintf(stderr, "multiboot: mh_header_addr = %#x\n", mh_header_addr);
695 fprintf(stderr, "multiboot: mh_load_addr = %#x\n", mh_load_addr);
696 fprintf(stderr, "multiboot: mh_load_end_addr = %#x\n", mh_load_end_addr);
697 fprintf(stderr, "multiboot: mh_bss_end_addr = %#x\n", mh_bss_end_addr);
698 #endif
700 fseek(f, mb_kernel_text_offset, SEEK_SET);
702 #ifdef DEBUG_MULTIBOOT
703 fprintf(stderr, "qemu: loading multiboot kernel (%#x bytes) at %#x\n",
704 mb_kernel_size, mh_load_addr);
705 #endif
707 if (!fread_targphys_ok(mh_load_addr, mb_kernel_size, f)) {
708 fprintf(stderr, "qemu: read error on multiboot kernel '%s' (%#x)\n",
709 kernel_filename, mb_kernel_size);
710 exit(1);
712 fclose(f);
715 /* blob size is only the kernel for now */
716 mb_mod_end = mh_load_addr + mb_kernel_size;
718 /* load modules */
719 stl_phys(mb_bootinfo + 20, 0x0); /* mods_count */
720 if (initrd_filename) {
721 uint32_t mb_mod_info = mb_bootinfo + 0x100;
722 uint32_t mb_mod_cmdline = mb_bootinfo + 0x300;
723 uint32_t mb_mod_start = mh_load_addr;
724 uint32_t mb_mod_length = mb_kernel_size;
725 char *next_initrd;
726 char *next_space;
727 int mb_mod_count = 0;
729 do {
730 next_initrd = strchr(initrd_filename, ',');
731 if (next_initrd)
732 *next_initrd = '\0';
733 /* if a space comes after the module filename, treat everything
734 after that as parameters */
735 cpu_physical_memory_write(mb_mod_cmdline, (uint8_t*)initrd_filename,
736 strlen(initrd_filename) + 1);
737 stl_phys(mb_mod_info + 8, mb_mod_cmdline); /* string */
738 mb_mod_cmdline += strlen(initrd_filename) + 1;
739 if ((next_space = strchr(initrd_filename, ' ')))
740 *next_space = '\0';
741 #ifdef DEBUG_MULTIBOOT
742 printf("multiboot loading module: %s\n", initrd_filename);
743 #endif
744 f = fopen(initrd_filename, "rb");
745 if (f) {
746 mb_mod_start = (mb_mod_start + mb_mod_length + (TARGET_PAGE_SIZE - 1))
747 & (TARGET_PAGE_MASK);
748 mb_mod_length = get_file_size(f);
749 mb_mod_end = mb_mod_start + mb_mod_length;
751 if (!fread_targphys_ok(mb_mod_start, mb_mod_length, f)) {
752 fprintf(stderr, "qemu: read error on multiboot module '%s' (%#x)\n",
753 initrd_filename, mb_mod_length);
754 exit(1);
757 mb_mod_count++;
758 stl_phys(mb_mod_info + 0, mb_mod_start);
759 stl_phys(mb_mod_info + 4, mb_mod_start + mb_mod_length);
760 #ifdef DEBUG_MULTIBOOT
761 printf("mod_start: %#x\nmod_end: %#x\n", mb_mod_start,
762 mb_mod_start + mb_mod_length);
763 #endif
764 stl_phys(mb_mod_info + 12, 0x0); /* reserved */
766 initrd_filename = next_initrd+1;
767 mb_mod_info += 16;
768 } while (next_initrd);
769 stl_phys(mb_bootinfo + 20, mb_mod_count); /* mods_count */
770 stl_phys(mb_bootinfo + 24, mb_bootinfo + 0x100); /* mods_addr */
773 /* Make sure we're getting kernel + modules back after reset */
774 option_rom_setup_reset(mh_load_addr, mb_mod_end - mh_load_addr);
776 /* Commandline support */
777 stl_phys(mb_bootinfo + 16, mb_cmdline);
778 t = strlen(kernel_filename);
779 cpu_physical_memory_write(mb_cmdline, (uint8_t*)kernel_filename, t);
780 mb_cmdline += t;
781 stb_phys(mb_cmdline++, ' ');
782 t = strlen(kernel_cmdline) + 1;
783 cpu_physical_memory_write(mb_cmdline, (uint8_t*)kernel_cmdline, t);
785 /* the kernel is where we want it to be now */
787 #define MULTIBOOT_FLAGS_MEMORY (1 << 0)
788 #define MULTIBOOT_FLAGS_BOOT_DEVICE (1 << 1)
789 #define MULTIBOOT_FLAGS_CMDLINE (1 << 2)
790 #define MULTIBOOT_FLAGS_MODULES (1 << 3)
791 #define MULTIBOOT_FLAGS_MMAP (1 << 6)
792 stl_phys(mb_bootinfo, MULTIBOOT_FLAGS_MEMORY
793 | MULTIBOOT_FLAGS_BOOT_DEVICE
794 | MULTIBOOT_FLAGS_CMDLINE
795 | MULTIBOOT_FLAGS_MODULES
796 | MULTIBOOT_FLAGS_MMAP);
797 stl_phys(mb_bootinfo + 4, 640); /* mem_lower */
798 stl_phys(mb_bootinfo + 8, ram_size / 1024); /* mem_upper */
799 stl_phys(mb_bootinfo + 12, 0x8001ffff); /* XXX: use the -boot switch? */
800 stl_phys(mb_bootinfo + 48, mmap_addr); /* mmap_addr */
802 #ifdef DEBUG_MULTIBOOT
803 fprintf(stderr, "multiboot: mh_entry_addr = %#x\n", mh_entry_addr);
804 #endif
806 /* Pass variables to option rom */
807 fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_ADDR, mh_entry_addr);
808 fw_cfg_add_i32(fw_cfg, FW_CFG_INITRD_ADDR, mb_bootinfo);
809 fw_cfg_add_i32(fw_cfg, FW_CFG_INITRD_SIZE, mmap_addr);
811 /* Make sure we're getting the config space back after reset */
812 option_rom_setup_reset(mb_bootinfo, 0x500);
814 option_rom[nb_option_roms] = "multiboot.bin";
815 nb_option_roms++;
817 return 1; /* yes, we are multiboot */
820 static void load_linux(void *fw_cfg,
821 target_phys_addr_t option_rom,
822 const char *kernel_filename,
823 const char *initrd_filename,
824 const char *kernel_cmdline,
825 target_phys_addr_t max_ram_size)
827 uint16_t protocol;
828 uint32_t gpr[8];
829 uint16_t seg[6];
830 uint16_t real_seg;
831 int setup_size, kernel_size, initrd_size = 0, cmdline_size;
832 uint32_t initrd_max;
833 uint8_t header[8192];
834 target_phys_addr_t real_addr, prot_addr, cmdline_addr, initrd_addr = 0;
835 FILE *f, *fi;
836 char *vmode;
838 /* Align to 16 bytes as a paranoia measure */
839 cmdline_size = (strlen(kernel_cmdline)+16) & ~15;
841 /* load the kernel header */
842 f = fopen(kernel_filename, "rb");
843 if (!f || !(kernel_size = get_file_size(f)) ||
844 fread(header, 1, MIN(ARRAY_SIZE(header), kernel_size), f) !=
845 MIN(ARRAY_SIZE(header), kernel_size)) {
846 fprintf(stderr, "qemu: could not load kernel '%s'\n",
847 kernel_filename);
848 exit(1);
851 /* kernel protocol version */
852 #if 0
853 fprintf(stderr, "header magic: %#x\n", ldl_p(header+0x202));
854 #endif
855 if (ldl_p(header+0x202) == 0x53726448)
856 protocol = lduw_p(header+0x206);
857 else {
858 /* This looks like a multiboot kernel. If it is, let's stop
859 treating it like a Linux kernel. */
860 if (load_multiboot(fw_cfg, f, kernel_filename,
861 initrd_filename, kernel_cmdline, header))
862 return;
863 protocol = 0;
866 if (protocol < 0x200 || !(header[0x211] & 0x01)) {
867 /* Low kernel */
868 real_addr = 0x90000;
869 cmdline_addr = 0x9a000 - cmdline_size;
870 prot_addr = 0x10000;
871 } else if (protocol < 0x202) {
872 /* High but ancient kernel */
873 real_addr = 0x90000;
874 cmdline_addr = 0x9a000 - cmdline_size;
875 prot_addr = 0x100000;
876 } else {
877 /* High and recent kernel */
878 real_addr = 0x10000;
879 cmdline_addr = 0x20000;
880 prot_addr = 0x100000;
883 #if 0
884 fprintf(stderr,
885 "qemu: real_addr = 0x" TARGET_FMT_plx "\n"
886 "qemu: cmdline_addr = 0x" TARGET_FMT_plx "\n"
887 "qemu: prot_addr = 0x" TARGET_FMT_plx "\n",
888 real_addr,
889 cmdline_addr,
890 prot_addr);
891 #endif
893 /* highest address for loading the initrd */
894 if (protocol >= 0x203)
895 initrd_max = ldl_p(header+0x22c);
896 else
897 initrd_max = 0x37ffffff;
899 if (initrd_max >= max_ram_size-ACPI_DATA_SIZE)
900 initrd_max = max_ram_size-ACPI_DATA_SIZE-1;
902 /* kernel command line */
903 pstrcpy_targphys(cmdline_addr, 4096, kernel_cmdline);
905 if (protocol >= 0x202) {
906 stl_p(header+0x228, cmdline_addr);
907 } else {
908 stw_p(header+0x20, 0xA33F);
909 stw_p(header+0x22, cmdline_addr-real_addr);
912 /* handle vga= parameter */
913 vmode = strstr(kernel_cmdline, "vga=");
914 if (vmode) {
915 unsigned int video_mode;
916 /* skip "vga=" */
917 vmode += 4;
918 if (!strncmp(vmode, "normal", 6)) {
919 video_mode = 0xffff;
920 } else if (!strncmp(vmode, "ext", 3)) {
921 video_mode = 0xfffe;
922 } else if (!strncmp(vmode, "ask", 3)) {
923 video_mode = 0xfffd;
924 } else {
925 video_mode = strtol(vmode, NULL, 0);
927 stw_p(header+0x1fa, video_mode);
930 /* loader type */
931 /* High nybble = B reserved for Qemu; low nybble is revision number.
932 If this code is substantially changed, you may want to consider
933 incrementing the revision. */
934 if (protocol >= 0x200)
935 header[0x210] = 0xB0;
937 /* heap */
938 if (protocol >= 0x201) {
939 header[0x211] |= 0x80; /* CAN_USE_HEAP */
940 stw_p(header+0x224, cmdline_addr-real_addr-0x200);
943 /* load initrd */
944 if (initrd_filename) {
945 if (protocol < 0x200) {
946 fprintf(stderr, "qemu: linux kernel too old to load a ram disk\n");
947 exit(1);
950 fi = fopen(initrd_filename, "rb");
951 if (!fi) {
952 fprintf(stderr, "qemu: could not load initial ram disk '%s'\n",
953 initrd_filename);
954 exit(1);
957 initrd_size = get_file_size(fi);
958 initrd_addr = (initrd_max-initrd_size) & ~4095;
960 if (!fread_targphys_ok(initrd_addr, initrd_size, fi)) {
961 fprintf(stderr, "qemu: read error on initial ram disk '%s'\n",
962 initrd_filename);
963 exit(1);
965 fclose(fi);
967 stl_p(header+0x218, initrd_addr);
968 stl_p(header+0x21c, initrd_size);
971 /* store the finalized header and load the rest of the kernel */
972 cpu_physical_memory_write(real_addr, header, ARRAY_SIZE(header));
974 setup_size = header[0x1f1];
975 if (setup_size == 0)
976 setup_size = 4;
978 setup_size = (setup_size+1)*512;
979 /* Size of protected-mode code */
980 kernel_size -= (setup_size > ARRAY_SIZE(header)) ? setup_size : ARRAY_SIZE(header);
982 /* In case we have read too much already, copy that over */
983 if (setup_size < ARRAY_SIZE(header)) {
984 cpu_physical_memory_write(prot_addr, header + setup_size, ARRAY_SIZE(header) - setup_size);
985 prot_addr += (ARRAY_SIZE(header) - setup_size);
986 setup_size = ARRAY_SIZE(header);
989 if (!fread_targphys_ok(real_addr + ARRAY_SIZE(header),
990 setup_size - ARRAY_SIZE(header), f) ||
991 !fread_targphys_ok(prot_addr, kernel_size, f)) {
992 fprintf(stderr, "qemu: read error on kernel '%s'\n",
993 kernel_filename);
994 exit(1);
996 fclose(f);
998 /* generate bootsector to set up the initial register state */
999 real_seg = real_addr >> 4;
1000 seg[0] = seg[2] = seg[3] = seg[4] = seg[4] = real_seg;
1001 seg[1] = real_seg+0x20; /* CS */
1002 memset(gpr, 0, sizeof gpr);
1003 gpr[4] = cmdline_addr-real_addr-16; /* SP (-16 is paranoia) */
1005 option_rom_setup_reset(real_addr, setup_size);
1006 option_rom_setup_reset(prot_addr, kernel_size);
1007 option_rom_setup_reset(cmdline_addr, cmdline_size);
1008 if (initrd_filename)
1009 option_rom_setup_reset(initrd_addr, initrd_size);
1011 generate_bootsect(option_rom, gpr, seg, 0);
1014 static const int ide_iobase[2] = { 0x1f0, 0x170 };
1015 static const int ide_iobase2[2] = { 0x3f6, 0x376 };
1016 static const int ide_irq[2] = { 14, 15 };
1018 #define NE2000_NB_MAX 6
1020 static int ne2000_io[NE2000_NB_MAX] = { 0x300, 0x320, 0x340, 0x360, 0x280, 0x380 };
1021 static int ne2000_irq[NE2000_NB_MAX] = { 9, 10, 11, 3, 4, 5 };
1023 static int serial_io[MAX_SERIAL_PORTS] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8 };
1024 static int serial_irq[MAX_SERIAL_PORTS] = { 4, 3, 4, 3 };
1026 static int parallel_io[MAX_PARALLEL_PORTS] = { 0x378, 0x278, 0x3bc };
1027 static int parallel_irq[MAX_PARALLEL_PORTS] = { 7, 7, 7 };
1029 #ifdef HAS_AUDIO
1030 static void audio_init (PCIBus *pci_bus, qemu_irq *pic)
1032 struct soundhw *c;
1034 for (c = soundhw; c->name; ++c) {
1035 if (c->enabled) {
1036 if (c->isa) {
1037 c->init.init_isa(pic);
1038 } else {
1039 if (pci_bus) {
1040 c->init.init_pci(pci_bus);
1046 #endif
1048 static void pc_init_ne2k_isa(NICInfo *nd)
1050 static int nb_ne2k = 0;
1052 if (nb_ne2k == NE2000_NB_MAX)
1053 return;
1054 isa_ne2000_init(ne2000_io[nb_ne2k],
1055 ne2000_irq[nb_ne2k], nd);
1056 nb_ne2k++;
1059 static int load_option_rom(const char *oprom, target_phys_addr_t start,
1060 target_phys_addr_t end)
1062 int size;
1063 char *filename;
1065 filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, oprom);
1066 if (filename) {
1067 size = get_image_size(filename);
1068 if (size > 0 && start + size > end) {
1069 fprintf(stderr, "Not enough space to load option rom '%s'\n",
1070 oprom);
1071 exit(1);
1073 size = load_image_targphys(filename, start, end - start);
1074 qemu_free(filename);
1075 } else {
1076 size = -1;
1078 if (size < 0) {
1079 fprintf(stderr, "Could not load option rom '%s'\n", oprom);
1080 exit(1);
1082 /* Round up optiom rom size to the next 2k boundary */
1083 size = (size + 2047) & ~2047;
1084 option_rom_setup_reset(start, size);
1085 return size;
1088 int cpu_is_bsp(CPUState *env)
1090 return env->cpuid_apic_id == 0;
1093 static CPUState *pc_new_cpu(const char *cpu_model)
1095 CPUState *env;
1097 env = cpu_init(cpu_model);
1098 if (!env) {
1099 fprintf(stderr, "Unable to find x86 CPU definition\n");
1100 exit(1);
1102 if ((env->cpuid_features & CPUID_APIC) || smp_cpus > 1) {
1103 env->cpuid_apic_id = env->cpu_index;
1104 /* APIC reset callback resets cpu */
1105 apic_init(env);
1106 } else {
1107 qemu_register_reset((QEMUResetHandler*)cpu_reset, env);
1109 return env;
1112 /* PC hardware initialisation */
1113 static void pc_init1(ram_addr_t ram_size,
1114 const char *boot_device,
1115 const char *kernel_filename,
1116 const char *kernel_cmdline,
1117 const char *initrd_filename,
1118 const char *cpu_model,
1119 int pci_enabled)
1121 char *filename;
1122 int ret, linux_boot, i;
1123 ram_addr_t ram_addr, bios_offset, option_rom_offset;
1124 ram_addr_t below_4g_mem_size, above_4g_mem_size = 0;
1125 int bios_size, isa_bios_size, oprom_area_size;
1126 PCIBus *pci_bus;
1127 ISADevice *isa_dev;
1128 int piix3_devfn = -1;
1129 CPUState *env;
1130 qemu_irq *cpu_irq;
1131 qemu_irq *isa_irq;
1132 qemu_irq *i8259;
1133 IsaIrqState *isa_irq_state;
1134 DriveInfo *dinfo;
1135 DriveInfo *hd[MAX_IDE_BUS * MAX_IDE_DEVS];
1136 BlockDriverState *fd[MAX_FD];
1137 int using_vga = cirrus_vga_enabled || std_vga_enabled || vmsvga_enabled;
1138 void *fw_cfg;
1140 if (ram_size >= 0xe0000000 ) {
1141 above_4g_mem_size = ram_size - 0xe0000000;
1142 below_4g_mem_size = 0xe0000000;
1143 } else {
1144 below_4g_mem_size = ram_size;
1147 linux_boot = (kernel_filename != NULL);
1149 /* init CPUs */
1150 if (cpu_model == NULL) {
1151 #ifdef TARGET_X86_64
1152 cpu_model = "qemu64";
1153 #else
1154 cpu_model = "qemu32";
1155 #endif
1158 for (i = 0; i < smp_cpus; i++) {
1159 env = pc_new_cpu(cpu_model);
1162 vmport_init();
1164 /* allocate RAM */
1165 ram_addr = qemu_ram_alloc(0xa0000);
1166 cpu_register_physical_memory(0, 0xa0000, ram_addr);
1168 /* Allocate, even though we won't register, so we don't break the
1169 * phys_ram_base + PA assumption. This range includes vga (0xa0000 - 0xc0000),
1170 * and some bios areas, which will be registered later
1172 ram_addr = qemu_ram_alloc(0x100000 - 0xa0000);
1173 ram_addr = qemu_ram_alloc(below_4g_mem_size - 0x100000);
1174 cpu_register_physical_memory(0x100000,
1175 below_4g_mem_size - 0x100000,
1176 ram_addr);
1178 /* above 4giga memory allocation */
1179 if (above_4g_mem_size > 0) {
1180 #if TARGET_PHYS_ADDR_BITS == 32
1181 hw_error("To much RAM for 32-bit physical address");
1182 #else
1183 ram_addr = qemu_ram_alloc(above_4g_mem_size);
1184 cpu_register_physical_memory(0x100000000ULL,
1185 above_4g_mem_size,
1186 ram_addr);
1187 #endif
1191 /* BIOS load */
1192 if (bios_name == NULL)
1193 bios_name = BIOS_FILENAME;
1194 filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
1195 if (filename) {
1196 bios_size = get_image_size(filename);
1197 } else {
1198 bios_size = -1;
1200 if (bios_size <= 0 ||
1201 (bios_size % 65536) != 0) {
1202 goto bios_error;
1204 bios_offset = qemu_ram_alloc(bios_size);
1205 ret = load_image(filename, qemu_get_ram_ptr(bios_offset));
1206 if (ret != bios_size) {
1207 bios_error:
1208 fprintf(stderr, "qemu: could not load PC BIOS '%s'\n", bios_name);
1209 exit(1);
1211 if (filename) {
1212 qemu_free(filename);
1214 /* map the last 128KB of the BIOS in ISA space */
1215 isa_bios_size = bios_size;
1216 if (isa_bios_size > (128 * 1024))
1217 isa_bios_size = 128 * 1024;
1218 cpu_register_physical_memory(0x100000 - isa_bios_size,
1219 isa_bios_size,
1220 (bios_offset + bios_size - isa_bios_size) | IO_MEM_ROM);
1224 option_rom_offset = qemu_ram_alloc(0x20000);
1225 oprom_area_size = 0;
1226 cpu_register_physical_memory(0xc0000, 0x20000, option_rom_offset);
1228 if (using_vga) {
1229 const char *vgabios_filename;
1230 /* VGA BIOS load */
1231 if (cirrus_vga_enabled) {
1232 vgabios_filename = VGABIOS_CIRRUS_FILENAME;
1233 } else {
1234 vgabios_filename = VGABIOS_FILENAME;
1236 oprom_area_size = load_option_rom(vgabios_filename, 0xc0000, 0xe0000);
1238 /* Although video roms can grow larger than 0x8000, the area between
1239 * 0xc0000 - 0xc8000 is reserved for them. It means we won't be looking
1240 * for any other kind of option rom inside this area */
1241 if (oprom_area_size < 0x8000)
1242 oprom_area_size = 0x8000;
1244 /* map all the bios at the top of memory */
1245 cpu_register_physical_memory((uint32_t)(-bios_size),
1246 bios_size, bios_offset | IO_MEM_ROM);
1248 fw_cfg = bochs_bios_init();
1250 if (linux_boot) {
1251 load_linux(fw_cfg, 0xc0000 + oprom_area_size,
1252 kernel_filename, initrd_filename, kernel_cmdline, below_4g_mem_size);
1253 oprom_area_size += 2048;
1256 for (i = 0; i < nb_option_roms; i++) {
1257 oprom_area_size += load_option_rom(option_rom[i], 0xc0000 + oprom_area_size,
1258 0xe0000);
1261 for (i = 0; i < nb_nics; i++) {
1262 char nic_oprom[1024];
1263 const char *model = nd_table[i].model;
1265 if (!nd_table[i].bootable)
1266 continue;
1268 if (model == NULL)
1269 model = "e1000";
1270 snprintf(nic_oprom, sizeof(nic_oprom), "pxe-%s.bin", model);
1272 oprom_area_size += load_option_rom(nic_oprom, 0xc0000 + oprom_area_size,
1273 0xe0000);
1276 cpu_irq = qemu_allocate_irqs(pic_irq_request, NULL, 1);
1277 i8259 = i8259_init(cpu_irq[0]);
1278 isa_irq_state = qemu_mallocz(sizeof(*isa_irq_state));
1279 isa_irq_state->i8259 = i8259;
1280 isa_irq = qemu_allocate_irqs(isa_irq_handler, isa_irq_state, 24);
1282 if (pci_enabled) {
1283 pci_bus = i440fx_init(&i440fx_state, &piix3_devfn, isa_irq);
1284 } else {
1285 pci_bus = NULL;
1286 isa_bus_new(NULL);
1288 isa_bus_irqs(isa_irq);
1290 ferr_irq = isa_reserve_irq(13);
1292 /* init basic PC hardware */
1293 register_ioport_write(0x80, 1, 1, ioport80_write, NULL);
1295 register_ioport_write(0xf0, 1, 1, ioportF0_write, NULL);
1297 if (cirrus_vga_enabled) {
1298 if (pci_enabled) {
1299 pci_cirrus_vga_init(pci_bus);
1300 } else {
1301 isa_cirrus_vga_init();
1303 } else if (vmsvga_enabled) {
1304 if (pci_enabled)
1305 pci_vmsvga_init(pci_bus);
1306 else
1307 fprintf(stderr, "%s: vmware_vga: no PCI bus\n", __FUNCTION__);
1308 } else if (std_vga_enabled) {
1309 if (pci_enabled) {
1310 pci_vga_init(pci_bus, 0, 0);
1311 } else {
1312 isa_vga_init();
1316 rtc_state = rtc_init(2000);
1318 qemu_register_boot_set(pc_boot_set, rtc_state);
1320 register_ioport_read(0x92, 1, 1, ioport92_read, NULL);
1321 register_ioport_write(0x92, 1, 1, ioport92_write, NULL);
1323 if (pci_enabled) {
1324 isa_irq_state->ioapic = ioapic_init();
1326 pit = pit_init(0x40, isa_reserve_irq(0));
1327 pcspk_init(pit);
1328 if (!no_hpet) {
1329 hpet_init(isa_irq);
1332 for(i = 0; i < MAX_SERIAL_PORTS; i++) {
1333 if (serial_hds[i]) {
1334 serial_init(serial_io[i], isa_reserve_irq(serial_irq[i]), 115200,
1335 serial_hds[i]);
1339 for(i = 0; i < MAX_PARALLEL_PORTS; i++) {
1340 if (parallel_hds[i]) {
1341 parallel_init(parallel_io[i], isa_reserve_irq(parallel_irq[i]),
1342 parallel_hds[i]);
1346 for(i = 0; i < nb_nics; i++) {
1347 NICInfo *nd = &nd_table[i];
1349 if (!pci_enabled || (nd->model && strcmp(nd->model, "ne2k_isa") == 0))
1350 pc_init_ne2k_isa(nd);
1351 else
1352 pci_nic_init(nd, "e1000", NULL);
1355 piix4_acpi_system_hot_add_init();
1357 if (drive_get_max_bus(IF_IDE) >= MAX_IDE_BUS) {
1358 fprintf(stderr, "qemu: too many IDE bus\n");
1359 exit(1);
1362 for(i = 0; i < MAX_IDE_BUS * MAX_IDE_DEVS; i++) {
1363 hd[i] = drive_get(IF_IDE, i / MAX_IDE_DEVS, i % MAX_IDE_DEVS);
1366 if (pci_enabled) {
1367 pci_piix3_ide_init(pci_bus, hd, piix3_devfn + 1);
1368 } else {
1369 for(i = 0; i < MAX_IDE_BUS; i++) {
1370 isa_ide_init(ide_iobase[i], ide_iobase2[i],
1371 isa_reserve_irq(ide_irq[i]),
1372 hd[MAX_IDE_DEVS * i], hd[MAX_IDE_DEVS * i + 1]);
1376 isa_dev = isa_create_simple("i8042");
1377 DMA_init(0);
1378 #ifdef HAS_AUDIO
1379 audio_init(pci_enabled ? pci_bus : NULL, isa_irq);
1380 #endif
1382 for(i = 0; i < MAX_FD; i++) {
1383 dinfo = drive_get(IF_FLOPPY, 0, i);
1384 fd[i] = dinfo ? dinfo->bdrv : NULL;
1386 floppy_controller = fdctrl_init_isa(fd);
1388 cmos_init(below_4g_mem_size, above_4g_mem_size, boot_device, hd);
1390 if (pci_enabled && usb_enabled) {
1391 usb_uhci_piix3_init(pci_bus, piix3_devfn + 2);
1394 if (pci_enabled && acpi_enabled) {
1395 uint8_t *eeprom_buf = qemu_mallocz(8 * 256); /* XXX: make this persistent */
1396 i2c_bus *smbus;
1398 /* TODO: Populate SPD eeprom data. */
1399 smbus = piix4_pm_init(pci_bus, piix3_devfn + 3, 0xb100,
1400 isa_reserve_irq(9));
1401 for (i = 0; i < 8; i++) {
1402 DeviceState *eeprom;
1403 eeprom = qdev_create((BusState *)smbus, "smbus-eeprom");
1404 qdev_prop_set_uint32(eeprom, "address", 0x50 + i);
1405 qdev_prop_set_ptr(eeprom, "data", eeprom_buf + (i * 256));
1406 qdev_init(eeprom);
1410 if (i440fx_state) {
1411 i440fx_init_memory_mappings(i440fx_state);
1414 if (pci_enabled) {
1415 int max_bus;
1416 int bus;
1418 max_bus = drive_get_max_bus(IF_SCSI);
1419 for (bus = 0; bus <= max_bus; bus++) {
1420 pci_create_simple(pci_bus, -1, "lsi53c895a");
1424 /* Add virtio console devices */
1425 if (pci_enabled) {
1426 for(i = 0; i < MAX_VIRTIO_CONSOLES; i++) {
1427 if (virtcon_hds[i]) {
1428 pci_create_simple(pci_bus, -1, "virtio-console-pci");
1434 static void pc_init_pci(ram_addr_t ram_size,
1435 const char *boot_device,
1436 const char *kernel_filename,
1437 const char *kernel_cmdline,
1438 const char *initrd_filename,
1439 const char *cpu_model)
1441 pc_init1(ram_size, boot_device,
1442 kernel_filename, kernel_cmdline,
1443 initrd_filename, cpu_model, 1);
1446 static void pc_init_isa(ram_addr_t ram_size,
1447 const char *boot_device,
1448 const char *kernel_filename,
1449 const char *kernel_cmdline,
1450 const char *initrd_filename,
1451 const char *cpu_model)
1453 if (cpu_model == NULL)
1454 cpu_model = "486";
1455 pc_init1(ram_size, boot_device,
1456 kernel_filename, kernel_cmdline,
1457 initrd_filename, cpu_model, 0);
1460 /* set CMOS shutdown status register (index 0xF) as S3_resume(0xFE)
1461 BIOS will read it and start S3 resume at POST Entry */
1462 void cmos_set_s3_resume(void)
1464 if (rtc_state)
1465 rtc_set_memory(rtc_state, 0xF, 0xFE);
1468 static QEMUMachine pc_machine = {
1469 .name = "pc-0.11",
1470 .alias = "pc",
1471 .desc = "Standard PC",
1472 .init = pc_init_pci,
1473 .max_cpus = 255,
1474 .is_default = 1,
1477 static QEMUMachine pc_machine_v0_10 = {
1478 .name = "pc-0.10",
1479 .desc = "Standard PC, qemu 0.10",
1480 .init = pc_init_pci,
1481 .max_cpus = 255,
1482 .compat_props = (CompatProperty[]) {
1484 .driver = "virtio-blk-pci",
1485 .property = "class",
1486 .value = stringify(PCI_CLASS_STORAGE_OTHER),
1488 .driver = "virtio-console-pci",
1489 .property = "class",
1490 .value = stringify(PCI_CLASS_DISPLAY_OTHER),
1492 .driver = "virtio-net-pci",
1493 .property = "vectors",
1494 .value = stringify(0),
1496 .driver = "virtio-blk-pci",
1497 .property = "vectors",
1498 .value = stringify(0),
1500 { /* end of list */ }
1504 static QEMUMachine isapc_machine = {
1505 .name = "isapc",
1506 .desc = "ISA-only PC",
1507 .init = pc_init_isa,
1508 .max_cpus = 1,
1511 static void pc_machine_init(void)
1513 qemu_register_machine(&pc_machine);
1514 qemu_register_machine(&pc_machine_v0_10);
1515 qemu_register_machine(&isapc_machine);
1518 machine_init(pc_machine_init);